Ürünler (44.000+)

MC14536BCP - 2MHz Programmable Timer | onsemi
MC14536BCP

MC14536BCP - 2MHz Programmable Timer | onsemi

The onsemi MC14536BCP is a 2 MHz programmable timer IC packaged in a 16-pin PDIP. Its core architecture is a 24-stage binary ripple counter with 16 stages selectable through a binary control code. The manufacturer also identifies provisions for an on-chip RC oscillator or an external clock, along with an on-chip monostable circuit that produces a pulse-type output. A programmable timer is a timing and counting semiconductor used to divide a clock, generate a delayed or fixed-duration pulse, and organize periodic events in digital systems. In the broader hierarchy, the MC14536BCP belongs to the clock and timing IC category, where it combines counter, oscillator-interface, and monostable functions. Selectable counter stages let a system obtain several timing periods from one input frequency without requiring a separate divider for each interval. The principal functional attributes are its 24-stage binary ripple-counter organization, 16 binary-selectable stages, support for either the internal RC timing path or an external clock input, and a monostable output path. The listed 2 MHz frequency identifies the device’s stated operating-speed class. Together, these features allow the MC14536BCP to cover repetitive timing, pulse generation, elapsed-time measurement, and clock-frequency division functions in one circuit. The counter architecture provides a direct relationship between input-clock frequency and selected output period. When a stage is selected, the associated ripple-counter output changes at a predictable fraction of the incoming clock. The monostable section adds a separate pulse-duration function, allowing the same timer IC to serve both periodic counting and event-triggering requirements. External timing components can be used with the RC oscillator path, while an external clock gives the circuit a reference with independently controlled accuracy and stability. Typical applications include industrial pulse and delay generation, test and measurement sequencing, laboratory timer circuits, control-system event counters, low-speed clock dividers, and embedded logic that needs a selectable output period. In these systems, the binary stage-selection inputs determine the timing ratio, while the clock source determines the absolute operating frequency and accuracy. The integrated monostable function is particularly useful when a load must receive a defined pulse after a triggering event. Designers should verify the power-supply limits, oscillator-component tolerances, timing limits, output characteristics, and absolute maximum ratings in the manufacturer datasheet before finalizing a circuit. External clock and reset timing must also be checked against the system requirement, because the programmable divider changes frequency but does not improve the accuracy of its time reference. PCB layout should keep timing-node connections short and provide adequate decoupling near the device. This product summary combines the manufacturer architecture description with package, function, sourcing, replacement, and design guidance. It focuses on the practical role of the selectable counter stages, the choice between RC and external-clock timing, and the constraints that must be checked when reusing an existing 16-pin timer design.

RFQ İletişim
MC145406F - 3-Driver/3-Receiver RS-232 Interface IC | Motorola
MC145406F

MC145406F - 3-Driver/3-Receiver RS-232 Interface IC | Motorola

The Motorola MC145406F is a silicon-gate CMOS interface IC combining three drivers and three receivers in a 16-pin DIP package. It is designed for EIA-232-D, EIA-232-E, and CCITT V.28 serial-interface requirements, with TTL-compatible driver inputs, slew-rate-limited outputs, and receivers capable of handling signals up to plus or minus 25 V. The device is intended for RS-232 equipment where one logic-side port must connect to multiple RS-232 line-side channels. An RS-232 interface IC, also called a driver/receiver or transceiver, converts between low-voltage digital logic levels and the voltage levels used by RS-232 links. The MC145406F integrates three transmit channels and three receive channels in one package, reducing component count and simplifying termination around multi-channel communications equipment. Its receiver inputs tolerate negative and positive voltage excursions, while the drivers provide controlled transitions suitable for cable-connected systems. Key features include true TTL input compatibility, slew-rate-limited driver outputs, a 300 ohm power-off source impedance, and output switching typically to within 25 percent of the supply rails. The silicon-gate CMOS implementation combines low-power operation with the voltage-level translation required by legacy serial communications equipment. The receiver input impedance is specified at 3 to 7 kOhm, allowing multiple line-side inputs to be connected to the receiver circuitry. The MC145406F is commonly used in RS-232 communications, industrial control equipment, data acquisition systems, printers, terminals, and legacy peripheral interfaces. Its three-driver arrangement can support transmit, handshake, and control channels when the system requires more than one RS-232 output. The three receivers can independently monitor data, status, and handshake lines. The device is especially useful when a design needs a conventional RS-232 interface rather than a modern low-voltage differential standard such as RS-485 or LVDS. When designing around the MC145406F, account for the voltage polarity of RS-232 signals and include the required external protection, biasing, and connector circuitry recommended by the manufacturer datasheet. Place bypass capacitors close to the supply pins and keep line-side routing away from sensitive logic traces. Confirm that every driver and receiver channel has the correct logic polarity before finalizing the system interface, since the MC145406F is not a protocol controller or level-shifting regulator. This product page provides the MC145406F datasheet reference, interface architecture, package information, application guidance, and engineering considerations for integrating a three-channel EIA-232-D and CCITT V.28 driver/receiver into communications equipment. It also distinguishes the electrical role of the IC from the surrounding connector, protection, and system-level serial protocol requirements.

RFQ İletişim
MC14541BD - 3MHz Programmable Timer | onsemi | Clock IC
MC14541BD

MC14541BD - 3MHz Programmable Timer | onsemi | Clock IC

The onsemi MC14541BD is a programmable timer IC with a maximum oscillator frequency of 3 MHz, a 16-stage binary counter, and an integrated oscillator in a 14-pin SOIC package. It is designed for applications that require an external resistor-capacitor timing network, automatic initialization at power-on, and programmable timer output control. A programmable timer is a clock-and-timing semiconductor that counts oscillator cycles and derives a delayed or periodic output. Within the broader device hierarchy, the MC14541BD belongs to the timer-counter category, combining a frequency-stable timing element with digital counter and output-control logic. This makes it useful when a circuit needs a basic time interval or recurring output generated locally from a small number of external timing components. The MC14541BD contains three primary functional blocks. Its integrated oscillator operates with an external capacitor and two resistors, while its 16-stage binary counter provides the counting structure used to create timing intervals. An automatic power-on reset circuit initializes the counter when power is applied, reducing the need for external reset sequencing in straightforward timing designs. Output control logic governs the behavior of the timer output. The 3 MHz maximum oscillator frequency establishes the upper operating point for the internal oscillator. Actual operating frequency depends on the selected external resistor-capacitor network, component tolerances, temperature, supply conditions, and the electrical characteristics of the timing network. Designers should select timing components against the manufacturer datasheet limits and verify frequency tolerance across the intended temperature range rather than assuming a perfectly constant period. Typical uses include general-purpose delay generation, periodic pulse generation, industrial control timing, oscillator-based clocking, and embedded timing subcircuits. The device can also serve as a building block in test fixtures and small control systems where an autonomous timer is more convenient than relying on a host microcontroller. The 14-pin SOIC package supports conventional surface-mount assembly and is also available in legacy through-hole-oriented component ecosystems. The principal design consideration is the oscillator network. Place the external resistor and capacitor close to their associated pins, use low-tolerance parts when timing accuracy matters, and reserve adequate ground-return paths to minimize coupling into the counter and output circuitry. Because power-on reset starts the timing sequence automatically, software or external logic should treat the first output transition as an initialization event rather than an arbitrary control signal. This product page consolidates the verified device identity, oscillator and counter features, package information, sourcing options, and drop-in replacement guidance. It also adds practical selection criteria and design notes for engineers evaluating the MC14541BD against other 14-pin programmable timer implementations.

RFQ İletişim
MC14541BDG - 3MHz 16-Stage Timer IC | onsemi
MC14541BDG

MC14541BDG - 3MHz 16-Stage Timer IC | onsemi

The onsemi MC14541BDG is a programmable timer integrated circuit with a 3 MHz maximum oscillator frequency, a 16-stage binary counter, and an integrated 14-pin SOIC package. It operates from 3 V to 18 V and is designed for frequency division, periodic timing, delay generation, and general-purpose industrial control applications. Its internal oscillator uses an external capacitor and two resistors, while automatic power-on reset and output control logic simplify standalone timer implementation. A programmable timer is a clock and timing IC that divides a known input frequency or generates a periodic output using a counter and oscillator. The MC14541B belongs to the broader timer hierarchy that includes oscillator, counter, monostable, and astable timing functions. Its oscillator and binary counter are normally used together to create a stable, adjustable clock output without requiring a separate microcontroller for simple repetitive timing tasks. The 16-stage counter provides programmable division ratios and supports repetitive waveform generation. The integrated oscillator accepts external timing components, allowing the operating frequency to be set with external resistor and capacitor values. A 3 V to 18 V supply range covers low-voltage logic systems through conventional industrial control voltages, while the specified -55 °C to 125 °C temperature range supports demanding industrial environments. The architecture separates the oscillator, 16-stage binary counter, automatic power-on reset, and output control logic into one integrated device. Automatic power-on reset establishes a defined starting condition after power is applied, reducing initialization effort. The output stage provides a periodic signal derived from the divided counter clock, allowing the IC to serve as the central timing element in small control, sequencing, and periodic-trigger systems. Typical uses include industrial pulse generation, repetitive equipment-cycle timing, delayed switching, frequency division, oscillator replacement, and embedded control subcircuits. The device is particularly useful where a fixed clock, a low-frequency service pulse, or a divided timing signal is required but a programmable microcontroller would add unnecessary complexity. Its broad supply range also allows one timer design to be used across multiple logic voltage environments. Choose external oscillator components with tolerances suitable for the required timing accuracy, and verify the resulting frequency across temperature and supply-voltage extremes. Place the timing capacitor and resistors close to the relevant device pins, keep the output load within the specified drive capability, and account for counter overflow when defining pulse timing. Confirm reset behavior and output polarity against the manufacturer datasheet for the selected system configuration. This page combines the manufacturer timing architecture, operating limits, package details, verified sourcing references, drop-in candidates, comparison parameters, and practical PCB guidance. It also distinguishes the tube-packaged MC14541BDG from related ordering codes and identifies which electrical details require confirmation for each candidate before PCB or production use.

RFQ İletişim
MC14541BDT - 3 MHz Programmable Timer | onsemi | Clock & Timing
MC14541BDT

MC14541BDT - 3 MHz Programmable Timer | onsemi | Clock & Timing

The onsemi MC14541BDT is a programmable timer integrated circuit built around a 16-stage binary counter, an integrated oscillator, automatic power-on reset, and output-control logic. It operates to a maximum clock frequency of 3 MHz, supports supply voltages up to 18 V, and is specified over a -55 °C to +125 °C temperature range. The device is associated with a 14-pin small-outline package and is supplied in tape-and-reel form with the T ordering suffix. A programmable timer is a clock-and-timing IC that divides an input frequency into a selectable output interval. In the MC14541B family, the oscillator can use an external capacitor and two resistors, while the counter provides the time-base division. This arrangement permits a compact implementation of periodic timing, delayed events, or repetitive switching without requiring a microcontroller. In the system hierarchy, it is a timer and counter within clock and timing integrated circuits, which are semiconductor devices used to establish, divide, and distribute time-based signals. The core feature of the MC14541BDT is the combination of an integrated 16-stage binary counter and an external-RC oscillator. The counter architecture provides programmable division of the oscillator frequency, and the automatic power-on-reset function initializes timing when power is applied. Output-control logic allows the resulting timing signal to be observed or routed to the next stage of a system. The 3 MHz maximum clock frequency supports substantially higher timing rates than low-frequency RC-only systems while retaining simple external analog timing components. The MC14541B family is designed for applications that need repeated timing without the overhead of a digital processor. Typical uses include industrial control intervals, delayed relay activation, pump or motor duty-cycle timing, periodic sampling triggers, oscillator replacement, and embedded timing sequences. Its 18 V maximum supply voltage is useful in industrial equipment where the timer must tolerate higher control-system rail voltages, while the -55 °C to +125 °C rated range supports demanding environmental environments. Timing accuracy depends on the tolerance and temperature coefficient of the external oscillator capacitor and resistors, as well as supply and temperature stability. Component selection should therefore include worst-case tolerance rather than nominal values alone. The power-on-reset behavior establishes a defined initial count state, but it does not replace a reset function for timing an event that begins at an arbitrary point in the operating cycle. For PCB implementation, place the oscillator capacitor and timing resistors close to their associated device pins to minimize parasitic capacitance and susceptibility to EMI. Keep the oscillator loop compact and away from high-current switching nodes. The datasheet pin-description and connection diagrams should be used when assigning tracks, because the available catalog summary does not enumerate every signal name for this exact ordering code. This page combines the verified manufacturer function description, catalog electrical limits, package information, application guidance, and qualification checks into an engineering-focused view of the MC14541BDT. It also distinguishes true same-footprint replacements from related family members whose package, temperature grade, or ordering code differs.

RFQ İletişim
MC14541BF - 3MHz Programmable Timer IC | onsemi | Timing
MC14541BF

MC14541BF - 3MHz Programmable Timer IC | onsemi | Timing

onsemi MC14541BF is a 3 MHz programmable timer integrated circuit with a 16-stage binary counter, integrated oscillator, automatic power-on reset, and output control logic in a 14-pin SOIC package. The MC14541BF generates a periodic output after a programmed count interval, making it suitable for timer, delay, waveform-generation, and periodic-control circuits. A programmable timer is a clock-and-timing semiconductor that counts oscillator or external clock pulses and changes an output after a selected number of counts. The MC14541BF combines that counting function with an on-chip oscillator, allowing an external resistor-capacitor network to establish the timing reference. This integration reduces the number of external timing components needed for basic interval-generation and periodic-event circuits. The device's principal features include a 16-stage binary counter, a maximum stated operating frequency of 3 MHz, automatic power-on reset, and dedicated output control logic. Its 14-pin SOIC package supports surface-mount PCB construction and automated assembly. The integrated oscillator accepts an external timing capacitor and two resistors, while the counter determines the interval between output transitions. The MC14541BF is a fixed-function timing device rather than a microcontroller or general-purpose clock generator. Its architecture is appropriate when a circuit needs predictable interval generation, recurring output transitions, or a delayed output event. The 16-stage counter provides a defined maximum count range for calculating the timing period from the oscillator frequency and selected count value. Typical uses include industrial control and automation timing, instrumentation and test-equipment trigger generation, consumer appliance delay circuits, oscillator and pulse-generation modules, and educational digital-electronics systems. The external resistor-capacitor timing network makes the frequency adjustable, while automatic power-on reset establishes a defined starting state after power is applied. PCB implementation requires close attention to oscillator component placement and signal routing. Place the external timing capacitor and resistors near the oscillator pins, keep the timing node compact, and avoid routing high-current or high-voltage switching paths beneath or beside that network. Confirm the output polarity and required count configuration against the manufacturer datasheet before relying on the circuit for a safety-related timing function. This product page combines the MC14541BF timing architecture, package information, engineering applications, comparison details, and drop-in replacement guidance. It also highlights the design checks needed to evaluate equivalent CMOS timer ICs without treating general functional similarity as proof of complete pin, timing, and electrical equivalence.

RFQ İletişim
MC14541BFG - 3MHz Programmable Timer IC | onsemi
MC14541BFG

MC14541BFG - 3MHz Programmable Timer IC | onsemi

The onsemi MC14541BFG is a 3MHz programmable timer integrated circuit with a 16-stage binary counter, an integrated oscillator, automatic power-on reset, and output control logic. The device is packaged in a 14-pin SOIC surface-mount package. Its internal oscillator works with an external capacitor and two resistors, allowing the timing network to be established by the application rather than an external clock generator. A programmable timer is a clock-and-timing semiconductor that divides time or generates periodic events from an oscillator. The MC14541B belongs to the broader CMOS timer hierarchy, where an oscillator establishes the base frequency and a binary counter produces a selectable division ratio. This arrangement is useful when a circuit requires repeated timing events without dedicating a microcontroller to simple delay, pulse, or periodic-output functions. The MC14541B's principal functional characteristics include its 16-stage binary counter, 3MHz maximum listed frequency, integrated oscillator, automatic power-on reset, and output control logic. The counter architecture allows one oscillator timing network to support multiple timing divisions. Automatic power-on reset establishes a defined starting condition when power is applied, reducing the amount of external initialization required by the host circuit. Technically, the timer combines an analog oscillator interface with digital counting and control functions. The external capacitor and two timing resistors determine the oscillator's behavior, while the 16-stage counter creates the longer timing intervals required by industrial and control applications. Because the MC14541B is a CMOS logic-family device, the design belongs to a low-power digital timing category suited to control logic rather than high-current power conversion. Typical applications include periodic event generation, delayed control actions, basic pulse and timing circuits, oscillator modules, and repetitive switching sequences in industrial equipment. It can also serve as a clock source in small embedded systems where a programmable divider is sufficient and a full microcontroller would add unnecessary complexity. The 14-pin SOIC package supports conventional surface-mount assembly and compact PCB layouts. Design consideration: calculate the oscillator network and allowable divider range across the complete operating-voltage range, not only at the nominal supply voltage. Confirm that the selected output frequency, reset timing, and counter range satisfy the application before committing the external resistor and capacitor values. Use the onsemi datasheet pin-description and timing tables when assigning PCB functions and validating startup behavior. This page combines the device architecture, verified timing attributes, package information, practical application guidance, and drop-in comparison candidates with the engineering details needed to plan a replacement or evaluate the MC14541BFG for a new design.

RFQ İletişim
MC14543BF - 3-18V BCD 7-Segment LCD Driver | onsemi
MC14543BF

MC14543BF - 3-18V BCD 7-Segment LCD Driver | onsemi

The onsemi MC14543BF is a CMOS BCD-to-seven-segment latch, decoder, and driver designed for liquid-crystal readouts, with operation from 3 V to 18 V in a 16-pin SOIC package. It accepts 4-bit BCD input and uses the 8421 code format to control the seven segment and decimal-point outputs required by common LCD display readouts. The MC14543BF combines input storage, code decoding, and display drive functions in one integrated circuit. An LCD BCD-to-seven-segment decoder is a display-interface IC positioned between a digital control system and a segmented liquid-crystal display. In the signal hierarchy, it belongs to the decoder and display-driver class within integrated logic and interface circuits. Its internal latch captures the input code, allowing the connected logic to update a display value without unintended intermediate segment transitions during the storage interval. The MC14543BF operates across a 3 V to 18 V supply range, allowing it to interface with both low-voltage and higher-voltage CMOS systems when its output drive requirements match the selected display. Its CMOS construction supports low-power operation in battery-powered equipment, while the integrated latch and 8421 BCD decoder reduce the number of external components required for a basic numeric display. The 16-pin SOIC package supports conventional surface-mount assembly. Because liquid-crystal segments generally require an alternating drive rather than a static DC level, the MC14543BF is intended for displays with compatible drive characteristics. Its segment outputs should be connected in accordance with the manufacturer pin-description table and the display module's required common and segment arrangement. Designers should verify output timing, polarity, and segment mapping against the selected LCD rather than inferring them only from the segment labels. Typical uses include compact digital meters, panel counters, small industrial readouts, laboratory equipment, and embedded control panels that receive BCD values from a microcontroller, counter, or system controller. It is especially appropriate where a dedicated numeric display is needed and the source already supplies a stable 4-bit BCD word. The latch function can simplify display updates and reduce intermediate visual states. Design the PCB with a low-impedance ground return and route the BCD inputs away from sensitive analog or high-speed switching nodes. Confirm the LCD segment mapping, common-drive topology, logic levels, and supply decoupling on the schematic before fabrication. If the display requires LCD bias generation, backlight control, or multiple digits, those functions generally need additional circuitry. This page combines the verified MC14543BF operating limits, package information, function description, sourcing workflow, and design guidance. It also distinguishes a true pin-to-pin replacement from merely similar seven-segment decoder functions by requiring identical package construction and confirmed electrical and pin compatibility.

RFQ İletişim
MC145481DW - 6-Bit PCM Codec-Filter | NXP | 20-SOIC
MC145481DW

MC145481DW - 6-Bit PCM Codec-Filter | NXP | 20-SOIC

The NXP MC145481DW is a general-purpose, single-channel PCM codec-filter with a 6-bit parallel PCM interface, 1 ADC, 1 DAC, and pin-selectable Mu-Law or A-Law companding. The device is offered in a 20-pin SOIC package and performs voice digitization, reconstruction, band limiting, and smoothing within PCM telecommunications systems. A PCM codec-filter is an interface integrated circuit that converts between analog voice signals and digital PCM streams while also performing the filtering needed to limit signal bandwidth and reconstruct smooth analog audio. Its position in the hierarchy is PCM codec-filter > voice codec > audio interface IC > integrated circuit, where it links microphone or line-level analog circuitry to a digital telephony or transmission system. Key features include a 6-bit PCM resolution, one analog-to-digital converter and one digital-to-analog converter, selectable A-Law or Mu-Law companding, and support for Short Frame Sync, Long Frame Sync, IDL, and GCI timing formats. An active RC filter preceding the switched-capacitor encoder filter suppresses very high-frequency noise before modulation, while the codec architecture maintains compatibility with related Motorola and NXP PCM interface devices. The MC145481 uses switched-capacitor filtering rather than a conventional continuously filtered signal path. This approach integrates the encoder and decoder filter functions more efficiently, although external bypass, timing, and impedance details still determine practical signal-chain performance. The 20-pin SOIC package also requires careful layout to separate analog input and output paths from PCM clock and data lines. Typical uses include digital telephone handsets, voice-processing modules, PCM channel equipment, line-card audio paths, and legacy telecommunications interfaces. These systems benefit from the device's combination of conversion, companding, clock-format flexibility, and filtering in one package, reducing the number of discrete analog filter and codec stages required. When designing the circuit, verify the exact clock mode, frame-sync polarity, and companding configuration against the manufacturer datasheet before routing signals. Place the analog input network close to the ADC pins, keep the PCM interface traces short, and provide the specified bypass capacitance at the supply pins. This page also organizes replacement options, design cautions, and application guidance around this legacy interface IC.

RFQ İletişim
MC145483DT - 13-Bit PCM Codec-Filter | NXP Semiconductors
MC145483DT

MC145483DT - 13-Bit PCM Codec-Filter | NXP Semiconductors

The NXP Semiconductors MC145483DT is a 13-bit linear PCM codec-filter with one ADC and one DAC, designed for voice digitization and reconstruction in digital communication equipment. It operates from a recommended 2.7V to 5.5V supply, can operate down to 2.3V with reduced performance, and is packaged in a 20-pin TSSOP. The codec uses 2s-complement PCM data and supports synchronous operation for deterministic digital audio interfaces. A PCM codec-filter is an interface IC that combines analog-to-digital conversion, digital-to-analog conversion, and signal filtering. In the electronic hierarchy, it belongs to the audio codec family, connects analog voice signals to digital processing systems, and ultimately supports communication equipment such as voice terminals, telephony interfaces, and embedded audio systems. Its integrated filter stages reduce the external circuitry needed for voice-band digitization and reconstruction. The MC145483DT provides a 13-bit conversion resolution, one analog input path, one analog output path, and 2s-complement PCM data formatting. The manufacturer datasheet describes the device in 20-pin SOG, SSOP, and TSSOP packages, with the MC145483DT ordered as a 20-pin TSSOP implementation. These characteristics make the device particularly relevant to designs requiring compact voice-band conversion rather than a full-featured multimedia audio codec. The device performs voice digitization, reconstruction, band limiting, and smoothing within one integrated package. Its recommended 2.7V to 5.5V operating range supports both 3.3V and 5V system rails. Operation down to 2.3V is possible with reduced performance, which can be useful in low-voltage designs after signal-quality and timing requirements have been checked against the manufacturer datasheet. Typical applications include digital telephone equipment, voice communication terminals, speech-processing systems, industrial voice interfaces, and embedded audio subsystems. In these systems, the MC145483DT converts an analog voice signal into PCM data for transmission or processing and reconstructs a filtered analog voice output from PCM data received from a digital channel. A host processor or communications controller supplies the required clock and serial interface signals. Designers should verify the device pinout, interface timing, analog impedance, and external filtering requirements in the manufacturer datasheet before PCB release. The 20-pin TSSOP footprint requires careful routing of analog and digital signals, short return paths, and stable supply bypassing. Because the MC145483DT is an older catalog component, procurement planning should also confirm lifecycle status and manufacturing availability before committing to a new production design. This page combines the MC145483DT's principal electrical characteristics, package information, sourcing guidance, and verified replacement analysis with practical PCB and integration guidance. It distinguishes a documented drop-in sourcing option from package variants that cannot be substituted without redesigning the PCB.

RFQ İletişim
MC145483DW - 3V 13-Bit PCM Codec-Filter | NXP
MC145483DW

MC145483DW - 3V 13-Bit PCM Codec-Filter | NXP

The NXP MC145483DW is a 3 V, 13-bit linear PCM codec-filter with one ADC and one DAC, housed in a 20-pin SOIC package. It uses a 2s-complement data format and combines voice digitization, voice reconstruction, band-limiting, and smoothing for digital communication systems. The device supports synchronous operation, making it suitable for systems that require the analog voice path and PCM processing to share a common clock. A PCM codec-filter is an audio interface integrated circuit that converts an analog voice signal into a linear PCM digital stream and reconstructs an analog voice signal from a digital stream. In the broader component hierarchy, it belongs to the audio codec family within interface ICs and power-management-dependent signal-chain devices. Its combined conversion and filtering functions reduce the number of separate blocks needed in a voice terminal or telecommunications design. The principal specifications are 13-bit conversion resolution, a 3 V supply, one ADC channel, one DAC channel, and a 20-pin SOIC package. The 2s-complement PCM format provides a standard representation for digital audio processing. Because the codec-filter integrates the required smoothing and band-limiting functions, designers can use it as the central analog-to-digital and digital-to-analog conversion element in compact voice-processing equipment. The MC145483 family is intended to operate in synchronous digital communication systems. Its linear PCM interface supports direct integration with a digital signal processor, controller, or other PCM-compatible logic. The 20-pin surface-mount package permits conventional automated assembly and board-level density, although the narrow logic spacing requires careful routing between the digital interface, analog signal path, supply pins, and ground return. Typical applications include digital telephone terminals, voice-band communications equipment, speech-processing systems, answering machines, and embedded voice interfaces. The codec-filter is especially appropriate when a design needs a defined PCM stream, integrated reconstruction filtering, and a compact interface between analog microphones or speakers and synchronous digital logic. For implementation, follow the manufacturer pin-description and typical-application tables when assigning analog inputs, outputs, clock signals, and control connections. Keep analog and digital return currents separated where practical, place bypass capacitors close to the supply pins, and route clock and data traces away from sensitive analog inputs. These practices reduce noise coupling in the voice signal path. This page combines device specifications, lifecycle information, package guidance, application analysis, and verified cross-reference research to support component selection and board-level implementation. The 13-bit PCM resolution and integrated filtering make MC145483DW a specialized choice for voice-band designs rather than a general-purpose high-fidelity audio converter.

RFQ İletişim
MC145483EJ - 13-Bit PCM Codec Filter Interface | NXP
MC145483EJ

MC145483EJ - 13-Bit PCM Codec Filter Interface | NXP

The NXP MC145483EJ is a single-channel 13-bit linear PCM codec-filter with one ADC and one DAC, a 2s-complement data format, and a 20-pin TSSOP package. Designed for 3 V audio and voice interfaces, it combines analog-to-digital conversion, digital-to-analog conversion, and filtering in one compact integrated circuit. The MC145483EJ also appears in Freescale Semiconductor catalog listings because Freescale became part of NXP Semiconductors. A PCM codec-filter is an interface IC that converts analog audio into digital PCM samples and reconstructs analog audio from digital PCM data. In the signal-chain hierarchy, the MC145483EJ belongs to the codec family within audio interface ICs, which sit between analog transducers and digital audio processors. Its integrated filtering reduces the number of separate components required in compact telephony, voice-capture, and audio-recording designs. Key characteristics include 13-bit resolution, one ADC channel, one DAC channel, 2s-complement PCM data, operation from a 3 V supply, and a 20-pin TSSOP package. The manufacturer documentation also identifies SOG, SSOP, and 32-pin QFN package options for the same codec-filter family. This availability in several package styles makes the MC145483EJ relevant to designs requiring different board-area or assembly constraints. The device is intended for linear PCM audio-interface applications where a compact mixed-signal codec is more appropriate than a general-purpose high-resolution audio converter. Its 13-bit data width places it in the voice and speech-capture class rather than the highest-fidelity music-recording class. Designers should use the pin-description and connection tables in the manufacturer datasheet to connect the analog inputs, analog output, digital PCM interface, clock signals, and supply pins correctly. Typical uses include digital telephone handsets, voice-recording equipment, speech-processing terminals, industrial voice panels, and compact audio-capture modules. Because the MC145483EJ integrates the codec and filter functions, it can simplify board partitioning when the source signal is a single voice channel and the destination is a parallel PCM processor. Careful clock and analog-layout planning is essential in a working design. Keep the analog input and output paths short, decouple the supply pins as shown in the manufacturer application guidance, and route digital clock and data lines away from sensitive analog nodes. Confirm the master-clock relationship, data timing, and external filter requirements against the manufacturer datasheet before releasing PCB artwork. This page combines the exact catalog specifications, package and interface details, application guidance, comparison fields, and engineering notes needed to evaluate the MC145483EJ for a new PCB revision. It also identifies where a separate engineering review is required before substituting a codec with different clocking or filter characteristics.

RFQ İletişim
MC145483EN - 13-Bit PCM Audio Codec | Freescale | SSOP-20
MC145483EN

MC145483EN - 13-Bit PCM Audio Codec | Freescale | SSOP-20

Freescale MC145483EN is a 13-bit linear PCM codec-filter with one ADC and one DAC, operating from a 3 V supply and packaged in a 20-pin SSOP. The device uses a 2s-complement PCM data format and provides analog-to-digital and digital-to-analog signal conversion for one-channel audio and telecom signal paths. A PCM codec-filter is an interface IC that converts analog audio signals into digital PCM samples and reconstructs analog signals from digital PCM data. Its place in the broader signal-chain hierarchy is codec-filter → audio interface IC → interface integrated circuit → semiconductor. The MC145483EN is intended for compact telephony, voice-processing, and embedded audio designs where a single conversion channel and 13-bit resolution provide an economical balance between fidelity and implementation complexity. The principal features of the MC145483EN include a 13-bit conversion resolution, one ADC channel, one DAC channel, 3 V operation, and a 20-pin SSOP package. The manufacturer describes the device as a MU-law-capable PCM codec-filter, while the family documentation identifies a linear PCM conversion format and 2s-complement data representation. These characteristics make the part appropriate for basic voice-band acquisition and playback rather than high-resolution multichannel audio. The MC145483EN integrates the digital conversion interface and filtering functions needed to move one audio channel between analog circuitry and a PCM processor. Digital data is transferred through the codec's PCM interface, while the analog side interfaces with external line or voice-band circuitry. Exact clocking, timing, input bandwidth, output loading, and codec-control details should be taken from the pin-description and timing tables in the manufacturer datasheet before the device is placed in a new design. Typical uses include one-channel voice terminals, telecommunications interfaces, industrial voice-capture modules, and embedded audio subsystems with modest resolution requirements. It can also support low-cost PCM test equipment when the system needs only one ADC path, one DAC path, and 13-bit data. For stereo or multichannel systems, several codec channels or a higher-channel-count codec would be required. Designers should verify the exact SSOP-20 footprint, exposed-pad arrangement, power pins, analog signal levels, and control timing against the manufacturer pinout before layout. Decoupling should follow the datasheet's recommended network and be placed close to the supply pins. Analog and digital return paths should be arranged to minimize codec clock and PCM data coupling into the analog input and output stages. This page consolidates the verified codec specifications, package information, sourcing data, related family options, and practical implementation guidance. It is intended to help engineers quickly determine whether the MC145483EN's one-channel, 13-bit, 3 V PCM architecture matches a voice or basic audio design before beginning detailed schematic and PCB work.

RFQ İletişim
MC145483FC - 13-Bit PCM Codec-Filter | NXP | Audio Interface
MC145483FC

MC145483FC - 13-Bit PCM Codec-Filter | NXP | Audio Interface

The NXP MC145483FC is a 13-bit linear PCM codec-filter with one ADC, one DAC, and 2s-complement PCM data, packaged in a 32-pin HVQFN (5 x 5 mm) with an exposed pad. It operates from a 3 V supply and is specified for an industrial temperature range of -40°C to 85°C. The device is designed for single-channel digital-audio conversion where compact implementation, direct PCM connectivity, and a low-pin-count surface-mount package are important. A PCM codec-filter is a semiconductor that converts between analog audio and linear pulse-code-modulation samples. The MC145483FC belongs to the broader codec and filter hierarchy, which falls under audio interface integrated circuits and, more generally, interface semiconductors. Its ADC accepts an analog audio input, while its DAC reconstructs an analog output from digital PCM data. The 13-bit linear format gives 4096 amplitude steps in each coded direction and represents audio using two's-complement samples. The codec-filter architecture integrates signal-path conversion functions needed to connect an analog audio source or destination to a digital audio system. The MC145483FC uses a 13-bit resolution and supports the 3 V supply identified for the component. Its 32-terminal HVQFN package reduces board area compared with many older leaded or narrow-outline codec packages, while the exposed thermal pad improves heat transfer through the PCB. The package is suitable for surface-mount assembly and industrial-temperature equipment. The principal engineering benefit is a dedicated single-channel conversion solution rather than a general-purpose codec with many configurable functions. This can simplify firmware, reduce analog routing, and preserve a direct PCM interface in equipment such as telephony terminals, industrial audio modules, and embedded voice systems. Designers should still validate signal levels, clocking, data format, and power sequencing against the manufacturer's application guidance before releasing a PCB. Typical uses include single-channel voice processing, digital audio interface modules, compact industrial controllers, and telecommunications equipment. The industrial temperature rating makes the device suitable for applications with controlled but non-consumer operating environments. A system requiring stereo conversion, multiple codec channels, or a modern high-resolution digital audio interface will generally need a different codec architecture. Layout is critical because the exposed pad must be connected to the appropriate supply or ground plane as specified in the manufacturer datasheet. Place required bypass capacitors close to their associated pins, keep analog and digital return currents controlled, and route high-current digital and clock traces away from the analog input and output nodes. Use the package land pattern and exposed-pad geometry from the manufacturer drawing rather than estimating solder-land dimensions. This page combines the device's 13-bit PCM architecture, 1/1 ADC-DAC configuration, 3 V operation, industrial temperature range, package details, practical replacement guidance, and PCB implementation considerations. It also distinguishes documented compatibility from generic codec substitutions, helping engineers determine whether a candidate preserves the footprint, pin functions, and signal interface before committing to a redesign.

RFQ İletişim
MC145483SD - 13-Bit PCM Codec-Filter | NXP Semiconductors
MC145483SD

MC145483SD - 13-Bit PCM Codec-Filter | NXP Semiconductors

The NXP Semiconductors MC145483SD is a 13-bit linear PCM codec-filter with one ADC, one DAC, and 2s-complement data handling, packaged in a 20-pin SSOP. The device combines an analog-to-digital converter, digital-to-analog converter, and filtering functions in a single integrated circuit. Its package is a rectangular, gull-wing surface-mount SSOP with 20 terminals. A PCM codec-filter is an interface IC that converts analog audio signals into digital PCM data and converts digital PCM data back into an analog audio signal. In the broader electronics hierarchy, the MC145483SD belongs to the audio codec class within interface ICs and supports systems built around digital audio transmission, storage, or signal processing. The 2s-complement format provides a standardized signed digital representation for processor input and output. The defining feature of the MC145483SD is its 13-bit resolution. Its matched ADC and DAC paths provide a compact one-channel conversion solution for equipment requiring an integrated PCM audio interface. The 20-pin SSOP package also makes the device suitable for leaded-surface-mount assembly rather than through-hole insertion. Because the available product information does not state the complete electrical limits, engineers should use the manufacturer pin-description table and electrical-characteristics tables before finalizing a new design. The MC145483SD is associated with the Motorola MC145483 codec-filter family and is listed by NXP Semiconductors as a PCM codec/filter with a 13-bit resolution. Its integrated 1-ADC/1-DAC arrangement reduces the number of separate conversion components required in a single-channel audio path. It also places the PCM conversion and filtering functions close together, which can simplify signal routing in compact voice, communications, and embedded audio systems. Typical applications include digital voice processing, communications equipment, audio interface modules, and embedded systems that exchange one-channel PCM audio with a digital processor. The part can be paired with a host controller that supports the required PCM timing and data format. In such systems, the analog input and output paths are filtered by the codec-filter while the digital side exchanges 13-bit 2s-complement samples. A critical design consideration is verifying the analog supply, digital supply, clocking, and control-signal requirements against the manufacturer datasheet before layout is released. PCB designers should preserve the recommended decoupling and analog grounding arrangement and route timing-sensitive digital signals away from sensitive audio traces. Component substitutions should not be assumed to be drop-in replacements unless package, pinout, clocking, data format, and electrical limits have been independently verified. This product page combines the identified device attributes, package information, sourcing references, engineering application guidance, and a conservative replacement assessment. It is intended to help engineers distinguish verified facts from parameters that still require confirmation from the original manufacturer documentation.

RFQ İletişim
MC145484DT - 13-Bit PCM Codec-Filter | NXP | 5 V
MC145484DT

MC145484DT - 13-Bit PCM Codec-Filter | NXP | 5 V

The NXP MC145484DT is a single-channel, 13-bit PCM codec-filter operating from a 5 V supply in a 20-pin TSSOP package. It combines a 1-bit ADC, a 1-bit DAC, and the filtering functions required for voice digitization, reconstruction, band limiting, and output smoothing. Pin-selectable Mu-Law or A-Law companding provides compatibility with North American and international digital telephony formats. A PCM codec-filter is a communications interface circuit that converts between analog voice signals and serialized PCM digital data. The codec performs sampling and digital-to-analog or analog-to-digital conversion, while the integrated filter removes unwanted frequency components and shapes the voice channel. Within the broader hierarchy, the MC145484DT is an interface IC, audio codec, PCM codec-filter, and telecommunications signal-processing device. The MC145484DT provides 13-bit resolution and one ADC channel with one DAC channel. Its 5 V supply operation suits established telecommunications and voice-processing equipment. Mu-Law and A-Law companding can be selected by pin, allowing the same hardware design to support two major PCM companding conventions. The device can operate in synchronous or asynchronous PCM systems, providing flexibility when the transmitted clock and framing arrangement differ between host equipment. The 20-pin TSSOP package places the analog, digital, clock, control, and power connections in a compact surface-mount format. Its signal path includes voice digitization and reconstruction together with the band-limiting and smoothing functions associated with a PCM codec-filter. The compact package does not imply that external analog filtering or system-level voice-channel calibration can be omitted; those requirements should be evaluated from the manufacturer application guidance for the complete voice path. Typical uses include digital telephone interfaces, voice-channel processing in telecommunications equipment, PCM transmission and reception systems, and legacy telephony designs requiring selectable Mu-Law or A-Law operation. The same general-purpose architecture is useful where analog voice must be converted into a serial PCM stream or reconstructed from a received stream. Synchronous operation can suit systems with a common reference clock, while asynchronous operation supports arrangements in which transmit and receive clocks are not continuously aligned. Designers should treat power, clocking, and analog grounding as separate implementation concerns. The 5 V supply must remain within the manufacturer’s specified operating limits, the PCM data and clock signals must meet interface timing requirements, and analog input and output routing should minimize coupling from digital switching activity. The pin-description table, recommended application circuit, and timing diagrams in the manufacturer datasheet should be used when assigning PCB tracks and validating signal integrity. This product page combines the manufacturer’s PCM codec-filter description with package, resolution, channel-count, companding, interface, and ordering information. It also organizes replacement-search results and engineering guidance so that engineers can evaluate the MC145484DT as a legacy 20-pin TSSOP voice-interface device before committing a board layout or production order.

RFQ İletişim
MC145484DW - 13-Bit 5V PCM Codec-Filter | NXP
MC145484DW

MC145484DW - 13-Bit 5V PCM Codec-Filter | NXP

The NXP Semiconductors MC145484DW is a 13-bit, 5 V PCM codec-filter for per-channel voice digitization and reconstruction, with pin-selectable Mu-Law or A-Law companding in a 20-pin SOIC package. It combines pulse-code modulation encoding or decoding, band limiting, and smoothing functions required by PCM telecommunications systems. A PCM codec-filter is a voice-processing integrated circuit that converts between analog speech signals and digital PCM data. Its place in the signal chain is between the audio input or output circuitry and a digital communications system. The codec-filter block provides the analog-to-digital or digital-to-analog conversion functions, while the companding circuitry supports the two commonly used logarithmic voice formats: Mu-Law and A-Law. The MC145484 provides a 13-bit PCM interface, operates from a 5 V supply, and supports pin-selectable Mu-Law or A-Law operation. According to the NXP manufacturer datasheet, it performs voice digitization and reconstruction together with the band-limiting and smoothing required by PCM systems. The device can operate in synchronous or asynchronous system configurations, giving it flexibility in telephony, voice-processing, and embedded communications equipment. Because companding is selected by pins rather than an internal programming interface, the device is suited to designs where a fixed voice format is known during hardware configuration. The 13-bit PCM resolution supports conventional voice-band processing, while the integrated filtering reduces the need for separate reconstruction smoothing networks. Its 20-pin SOIC package is suitable for conventional surface-mount assembly and legacy voice-interface designs. Typical uses include PCM voice codecs in telephony equipment, speech-processing modules, digital telephone interfaces, and communications systems that transmit or reconstruct companded voice. The MC145484 is particularly appropriate when the system requires a dedicated PCM codec-filter with selectable Mu-Law or A-Law companding rather than a general-purpose modern audio codec. Designers should confirm clocking mode, pin levels, analog input and output requirements, and external filtering against the manufacturer datasheet before layout. Decoupling and analog signal routing are especially important because codec performance can be affected by supply noise, clock jitter, and unwanted coupling from digital switching signals. Stable power and short analog traces are therefore preferable to long PCB routes around the device. This product page combines the manufacturer function description, package and interface details, verified lifecycle context, and engineering guidance for selecting and implementing the MC145484DW. It also distinguishes documented drop-in replacements from merely similar codecs so that board-level replacement decisions are based on package, pin compatibility, and functional equivalence rather than broad device similarity.

RFQ İletişim
MC145484EG - 5V PCM Codec-Filter | Motorola Semiconductor Products
MC145484EG

MC145484EG - 5V PCM Codec-Filter | Motorola Semiconductor Products

The Motorola Semiconductor Products MC145484EG is a 5V PCM codec-filter that performs per-channel voice digitization, reconstruction, band limiting, and smoothing in PCM systems. It supports pin-selectable Mu-Law or A-Law companding and is packaged in a 20-pin small-outline gull-wing package. The MC145484EG is intended for synchronous and asynchronous PCM applications where the channel bit rate is established by an external clock or by the associated system timing. A PCM codec-filter is a specialized interface IC that converts analog voice signals into pulse-code-modulated digital streams and reconstructs analog signals from received PCM data. Within the power-management and signal-chain hierarchy, it belongs to the interface-IC class rather than to general-purpose processors or standalone analog converters. Its integrated filtering reduces the external circuitry needed for speech-band antialiasing and reconstruction smoothing. Key device characteristics include selectable Mu-Law or A-Law companding, support for both synchronous and asynchronous operating arrangements, and operation from a 5V supply. The device performs codec filtering for each PCM channel and uses fixed-function control inputs to select its operating behavior. The EG order code corresponds to the 20-terminal gull-wing package listed for the MC145484 family, with an industrial temperature grade. The MC145484EG integrates the digital conversion, band-limiting, and smoothing functions expected in a voice-channel codec. Companding selection allows the same hardware to support either Mu-Law or A-Law speech encoding conventions. This flexibility is useful in telephony, digital voice recording, and embedded communications equipment where the line-side signaling system determines the required companding law. Typical applications include digital telephone interfaces, voice-channel equipment, communications terminals, and PCM test systems. In a transmit path, the MC145484EG digitizes and filters an analog voice input; in a receive path, it reconstructs and smooths PCM data into an analog output. Designers should account for the device's 5V supply requirement and confirm the master-clock relationship required by the selected synchronous or asynchronous system configuration. For layout, keep analog voice inputs and reconstructed analog outputs away from digital clock and data traces, and follow the decoupling and grounding arrangement shown in the manufacturer datasheet. Confirm clock jitter, permitted bit rates, and companding configuration at the system level because these interface conditions determine intelligibility and signal quality even when the codec itself is operating correctly. This page consolidates package details, sourcing guidance, replacement considerations, and practical interface design notes for engineers evaluating the MC145484EG as a single-channel 5V PCM codec-filter.

RFQ İletişim
MC145484EJ - 5V 13-Bit PCM Codec-Filter | NXP | Audio Interface
MC145484EJ

MC145484EJ - 5V 13-Bit PCM Codec-Filter | NXP | Audio Interface

NXP Semiconductors MC145484EJ is a 5 V PCM codec-filter for digital audio interfaces, with a 13-bit PCM audio interface and selectable Mu-Law or A-Law companding. The device is packaged in a 20-pin TSSOP. It accepts serial PCM data, performs the required companding and filtering functions, and supports general-purpose per-channel PCM audio signal processing. A PCM codec-filter is an interface IC positioned between a digital audio data source and a telephone, communications, or audio-processing circuit. PCM represents sampled audio as binary words, while companding reduces word length by applying logarithmic encoding to improve signal-to-noise performance. The MC145484EJ therefore belongs to the broader hierarchy of audio interface IC, interface IC, signal-processing IC, and semiconductor. Key features include a 13-bit PCM interface, 5 V supply operation, selectable Mu-Law or A-Law companding, and a compact 20-pin TSSOP package. These characteristics suit designs that require a dedicated PCM-to-analog or digital audio channel conversion stage rather than a general-purpose audio codec. The TSSOP package also supports surface-mount assembly and provides a practical upgrade path for designs using larger through-hole packages. The MC145484EJ is intended for per-channel PCM codec-filter applications. Its companding selection supports compatibility with North American Mu-Law and international A-Law telecommunications conventions, while the serial PCM interface allows connection to digital audio buses and channel-processing equipment. Clocking, data-format, and timing details should be taken directly from the manufacturer datasheet when laying out the interface. Typical uses include digital telephone interfaces, voice-processing modules, communications equipment, sound cards, and legacy PCM audio subsystems. In each case, the MC145484EJ provides a focused conversion function and reduces the component count compared with a discrete implementation of the corresponding companding and filtering functions. PCB implementation requires careful signal routing and stable supply bypassing. Place the device close to the supported digital audio source, maintain short traces on clock and data nets, and avoid routing high-current or switching-supply paths beside sensitive audio signals. Confirm the package dimensions, pin assignments, and timing requirements against the manufacturer datasheet before releasing artwork. This product page combines device classification, sourcing guidance, engineering considerations, and a structured comparison framework. It also distinguishes verified drop-in replacements from package or functionally similar parts that require PCB changes, helping engineers evaluate interchangeability before committing a design.

RFQ İletişim
MC145505P - 13-Bit Mono PCM Codec-Filter | Motorola
MC145505P

MC145505P - 13-Bit Mono PCM Codec-Filter | Motorola

The Motorola MC145505P is a 13-bit PCM codec-filter mono-circuit in a 16-pin PDIP package, designed for one-channel A-law or mu-law pulse-code-modulation audio interfaces. Its principal characteristics are single-channel operation, 13-bit PCM resolution, an integrated codec-filter function, and an operating-temperature range of -40°C to +85°C. A PCM codec-filter is an interface IC that converts between analog voice-band audio and digital PCM streams. The MC145505 family combines a codec and filter in one circuit, reducing the component count required by a traditional telecommunications or audio interface. It belongs to the broader hierarchy of audio codec, interface IC, ADC/DAC, and signal-processing semiconductor families. The MC145505P is identified as a mono PCM codec-filter supporting A-law and mu-law coding. The 13-bit PCM format is suitable for speech-oriented systems requiring one digital voice channel, while the integrated filter function helps condition the analog audio path. The device is supplied in a through-hole PDIP package, making it suitable for legacy telecommunications equipment, voice-processing systems, and industrial control products assembled with conventional through-hole methods. Technically, the MC145505P belongs to the legacy MC145502, MC145503, and MC145505 family of per-channel PCM codec-filter mono-circuits. The model suffix “P” identifies the PDIP package option shown in the product listings. Because this is a mature legacy interface device, system-level verification should emphasize clocking, analog signal levels, timing, and PCB compatibility rather than assuming that every newer codec has the same analog interface or control arrangement. Typical applications include single-channel digital telephony, pulse-code-modulation voice terminals, audio recording and playback modules, speech-capture equipment, and industrial voice panels. In these systems, the codec-filter can reduce the number of separate conversion and filtering blocks while preserving compatibility with A-law or mu-law PCM channels. Before replacing an existing design, compare the complete pin description, supply requirements, clock interface, and analog signal path in the manufacturer datasheet. The MC145505P cannot be treated as a generic modern audio ADC or DAC substitute because its PCM framing, companding format, timing, and legacy control interface are application-specific. This product record combines the manufacturer-family description, package and temperature information, lifecycle classification, source links, and design-focused guidance. It also clearly distinguishes verified device characteristics from parameters that require confirmation in the original design documentation.

RFQ İletişim
MC145506P 22-DIP PCM Codec-Filter Mono-Circuit | Motorola
MC145506P

MC145506P 22-DIP PCM Codec-Filter Mono-Circuit | Motorola

Motorola MC145506P is a mono PCM codec-filter integrated circuit designed for voice digitization, reconstruction, band limiting, and signal smoothing in PCM communication systems. The device provides a 13-bit PCM interface and is packaged in a 22-pin DIP. Its integrated codec-filter architecture reduces the number of separate discrete functions required around a voice-processing signal chain. A PCM codec-filter is a specialized interface IC that belongs to the broader class of audio codecs and PCM interface devices. In a telephone or telecommunications system, a PCM interface converts between analog voice signals and digital pulse-code-modulated streams. Codec-filter circuits also perform the band-limiting and smoothing needed to prepare signals for transmission or reconstruction at the receiving end. The MC145506 family combines voice digitization and reconstruction with integrated filtering functions. According to the manufacturer datasheet, the MC145506, MC145507, and MC145508 are per-channel codec-filter PCM mono-circuits. This family positioning makes the MC145506P useful in designs that require a dedicated mono PCM channel rather than a multichannel audio codec with a substantially different control and data interface. The MC145506P exposes a 13-bit PCM data path, making bit allocation an important system-level consideration. Designers should determine whether the host channel expects 13-bit linear PCM, determine the required clock and framing arrangement from the datasheet, and account for any sign-extension or scaling performed elsewhere in the system. These interface details are more important than simply matching a generic codec description because incompatible framing or timing can prevent correct operation despite similar audio functionality. Typical applications include mono voice transmit and receive paths in telecommunications equipment, digital telephone interfaces, speech-processing systems, and PCM-based audio links. In each case, the device can combine conversion and filtering functions while reducing the number of external signal-conditioning blocks. Its mono-circuit architecture is particularly appropriate when each conversation channel is handled independently. The primary design consideration is PCB footprint compatibility. The MC145506P uses a 22-pin DIP rather than a modern surface-mount package, so it requires through-hole routing and is generally less compact than newer PCM codec implementations. Confirm pin assignments, supply requirements, clocking, analog interfaces, and timing values against the manufacturer datasheet before laying out a new board or adapting an existing design. This product record combines the manufacturer datasheet identity, distributor catalog details, package information, application guidance, and an explicit comparison of what is known about this legacy PCM interface with what requires circuit-level verification. It is intended to help engineers identify the correct function, package, and application before requesting sourcing information for an assembled board.

RFQ İletişim
MC14551BD - 4PDT Analog Switch, 3-18 V, 16-SOIC | onsemi
MC14551BD

MC14551BD - 4PDT Analog Switch, 3-18 V, 16-SOIC | onsemi

onsemi MC14551BD is a digitally controlled 4PDT analog switch with a 3 V to 18 V supply range, low ON impedance, and very low OFF leakage current, housed in a 16-SOIC package. The device provides four independently addressed analog switch sections for routing signals within the complete supply voltage range. An analog switch is a solid-state semiconductor device that routes analog or digital signals under digital control without mechanical contacts. The MC14551BD belongs to the analog switch and multiplexer hierarchy, where a 4PDT arrangement provides four independent pole paths. This makes it useful for signal routing, channel selection, test-point isolation, and analog signal multiplexing. The main device characteristics include a 3 V to 18 V power-supply range, low ON impedance, and very low OFF leakage current. The 16-SOIC package supports conventional surface-mount PCB assembly. The control inputs determine which signal paths are connected, while the switched terminals can handle analog signals across the operating supply range. The MC14551B architecture is based on complementary switch elements controlled by logic-level select inputs. Low ON resistance helps minimize signal attenuation when a channel is active, while low OFF leakage helps prevent unwanted coupling between inactive channels. The device is suitable for systems requiring several analog paths to share a common interface without using mechanical relays. Typical uses include multiplexed sensor acquisition, audio and communications routing, instrumentation signal selection, and embedded test circuits. In a measurement system, the switch can connect multiple inputs to a shared amplifier or converter, reducing the number of external analog front-end components. In a communications design, it can route controlled signals among test and operating paths. For layout, place the device close to the signal sources and receiving circuitry to minimize trace resistance and capacitance. Keep control traces away from sensitive analog nodes where possible, and follow the datasheet pin-description table when assigning the 16-SOIC footprint. This page summarizes the principal device function, package information, sourcing structure, and practical design considerations for engineers evaluating the MC14551BD.

RFQ İletişim
MC14551BDG - Quad 4PDT Analog Multiplexer | onsemi
MC14551BDG

MC14551BDG - Quad 4PDT Analog Multiplexer | onsemi

The onsemi MC14551BDG is a digitally controlled analog multiplexer implementing a quad 4PDT solid-state switch, with four independent 2:1 analog paths and a rated ON resistance of 280 ohm. The device operates from a 3 V to 18 V supply in a 16-pin SOIC package and is specified for operation from -55 C to 125 C. It is intended for routing analog signals across the complete supply-voltage range. A digital multiplexer is an interface IC that uses control inputs to select one of two signal paths connected to each common terminal. A demultiplexer reverses that signal-routing direction, while a combined multiplexer or demultiplexer can support both uses depending on how the channels are connected. In the broader semiconductor hierarchy, the MC14551BDG belongs to the analog switch and multiplexer family within interface ICs. Its 4PDT arrangement provides four independent analog selections controlled by four address inputs. The MC14551BDG provides four 2:1 switch circuits, a nominal ON resistance of 280 ohm, and low OFF-channel leakage. Break-before-make behavior prevents two potentially conflicting signal paths from being connected during an address transition. These characteristics make the device suitable for channel selection, signal routing, test-equipment interfaces, data-acquisition systems, and control systems that must route multiple analog signals with limited logic control. Control of analog signals across the full supply range allows the selected channel to operate without a separate reduced analog-signal supply. The 3 V to 18 V operating range accommodates conventional 5 V, 12 V, and 18 V system rails. The quad 4PDT organization allows one device to perform four related routing functions, reducing package count compared with separate single-switch implementations. The 16-SOIC package is also a standard surface-mount form factor supported by common assembly processes. Typical applications include multiplexing analog sensor inputs, selecting measurement channels in instrumentation, routing audio or communication signals, building programmable test paths, and implementing sample-and-hold or data-acquisition front ends. The digital address interface allows a microcontroller, programmable logic controller, or other digital controller to select the active analog path. Designers should verify signal amplitude, bandwidth, charge injection, off leakage, and propagation delay against their particular source impedance and settling requirements. For layout, place input and output decoupling close to the supply pins, keep analog traces short and away from high-current switching nodes, and provide a solid ground reference. Because the device is a voltage-controlled analog switch, the selected signal must remain within its intended operating range during address transitions. Use the onsemi MC14551B datasheet for the exact pin assignment, timing limits, control truth table, and recommended operating conditions before finalizing the PCB. This page consolidates the confirmed operating specifications, package information, pricing structure, drop-in candidate, comparison table, and practical interface-design guidance for engineers evaluating the MC14551BDG in analog-routing systems.

RFQ İletişim
MC14551BF - 280 Ohm Quad 2:1 Analog Switch | onsemi
MC14551BF

MC14551BF - 280 Ohm Quad 2:1 Analog Switch | onsemi

The onsemi MC14551BF is a digitally controlled quad 2:1 analog multiplexer and demultiplexer with a typical 280 ohm ON resistance, four independent 2:1 switching channels, and a 16-pin SOIC package. It routes analog signals across the complete supply-voltage range and provides very low OFF leakage current, making it suitable for precision signal-selection and test systems. An analog multiplexer is a semiconductor interface that uses digital control signals to select one of multiple analog inputs and connect it to a shared output. A multiplexer and demultiplexer can also reverse this function, allowing a common line to be routed to a selected destination. The MC14551BF belongs to the analog switch and multiplexer hierarchy within interface ICs and provides multiple switching functions in one package. Key features include a 2:1 configuration for each of four circuits, a 280 ohm ON resistance, low OFF leakage, and control inputs protected by triple diode protection. The device supports a 3.0 Vdc to 18 Vdc supply range, while its analog signal range extends across the VDD-to-VEE span. These characteristics support both positive-supply and dual-supply signal-routing arrangements when the circuit is operated within its specified limits. The MC14551BF uses independent address and enable controls to determine which paired input reaches each multiplexer output. This arrangement allows a microcontroller or programmable logic device to scan sensors, sample multiple measurement channels, isolate instrumentation paths, or route signals to converters. Its four switching sections are organized as a 4PDT solid-state switch, providing a compact way to implement several analog routing functions on one board. Typical uses include data acquisition systems, automated test equipment, programmable signal conditioning, industrial control interfaces, and multichannel sensor acquisition. The 280 ohm ON resistance is most appropriate for moderate-impedance analog paths where switching loss and input loading remain acceptable. For very high-impedance sources, the selected switch's capacitance, leakage, and settling behavior require validation in the complete signal chain. Design the PCB with short analog traces, a solid ground reference, and decoupling placed close to VDD and VEE. Account for injected charge and off-state leakage when switching between sources at different potentials. Avoid exceeding the device's maximum rated voltages, and verify control logic levels across the full supply range before using the multiplexer's address and enable inputs. This product page consolidates the exact MC14551BF identification, package details, technical specifications, sourcing information, selection guidance, and design considerations into one engineering reference. It also distinguishes confirmed drop-in-family options from unrelated interface ICs, helping PCB designers evaluate footprint reuse without confusing electrical equivalence with functional similarity.

RFQ İletişim