Mikrodenetleyiciler

Ürünler (20.000+)

PIC16F1579-E/SS - 8-bit MCU, 32MHz, 14KB Flash, 4x16b PWM | Microchip
PIC16F1579-E/SS

PIC16F1579-E/SS - 8-bit MCU, 32MHz, 14KB Flash, 4x16b PWM | Microchip

The Microchip Technology PIC16F1579-E/SS is an 8-bit PIC16 microcontroller with a 32 MHz CPU core, 14 KB (8K x 14) of Flash program memory and 1 KB of RAM, housed in a 20-pin SSOP package. It belongs to the PIC16(L)F157x family, the defining feature of which is four independent 16-bit PWMs with dedicated timers for LED lighting, motor control and high-resolution analog applications. The part integrates four 16-bit PWMs, a 10-bit ADC with up to 12 channels, two comparators, a 5-bit DAC, CWG (Complementary Waveform Generator), PPS (Peripheral Pin Select) and an EUSART. An 8-bit PIC microcontroller (MCU) is a Harvard-architecture RISC processor family built around a small instruction set (approximately 35 instructions), most of which execute in a single clock cycle. Within the broader semiconductor taxonomy, a microcontroller is a sub-category of microcomputer that combines a CPU, non-volatile program memory, working RAM, and a rich peripheral set on a single die. PIC16 devices sit between 8-pin baseline parts (PIC10/12) and higher-pin-count enhanced mid-range devices (PIC18), and are commonly used when the application needs more peripherals than a PIC12 can offer but does not justify a PIC18. Key features of the PIC16F1579 include four 16-bit PWMs with independent timers for high-resolution duty control, a 10-bit ADC with up to 12 input channels, two comparators, a 5-bit DAC, CWG for complementary outputs with dead-band control, and PPS that remaps most digital I/O to any pin. The device operates across 2.3 V to 5.5 V and supports up to 32 MHz internal or external clock, with a -40 °C to +125 °C extended operating temperature range. The PIC16F1579 implements an enhanced mid-range 8-bit core with a hardware multiplier and CLC (Configurable Logic Cell), combined with the high-resolution 16-bit PWM and a 5-bit DAC, making it suitable for digital lighting, fan/PWM control and small motor drive applications where precise duty-cycle resolution is critical. PPS further simplifies PCB layout by allowing peripherals to be assigned to a wide range of pins without rewiring. Typical applications include high-resolution LED dimming, complementary half-bridge drivers for fans and small motors, general-purpose 8-bit control boards, sensor interfacing with ADC and comparators, and consumer appliances requiring mixed-signal 8-bit processing. The wide VDD range and SSOP-20 footprint also make it a drop-in candidate on boards designed around the legacy PIC16F1829 and PIC16F1509 footprints. When designing with the PIC16F1579-E/SS, ensure the MPLAB X IDE and XC8 compiler are selected to match the PIC16F157x device header; PPS assignments must be locked at startup to prevent accidental remapping of EUSART or PWM outputs. This page synthesizes distributor pricing, drop-in same-package alternatives sourced from Microchip's own PIC16(L)F157x family, and practical design notes that are not aggregated on any single distributor or manufacturer page.

RFQ İletişim
PIC16F1579-I/GZ - 8-bit MCU 32MHz 14KB Flash 20-UQFN | Microchip
PIC16F1579-I/GZ

PIC16F1579-I/GZ - 8-bit MCU 32MHz 14KB Flash 20-UQFN | Microchip

The Microchip Technology PIC16F1579-I/GZ is an 8-bit PIC microcontroller operating at 32 MHz with 14 KB (8K x 14) of Flash program memory, 1 KB of RAM, and packaged in a 20-pin UQFN (4x4 mm) with exposed thermal pad. It belongs to the PIC16(L)F157x family and integrates four independent 16-bit PWMs alongside a 10-bit ADC, addressing applications that combine analog sensing with high-resolution PWM generation. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and peripherals on one die. The 8-bit PIC16 family uses a RISC-based Harvard architecture with separate program and data buses, allowing instruction fetch and data access to occur in parallel. Within the broader PIC taxonomy, the PIC16F157x sits in the mid-range "plus" tier optimized for motor, lighting, and power-conversion control where 16-bit PWM resolution is required. Key features include 14 KB Flash, 1 KB RAM, four 16-bit PWMs with independent timers, a 10-bit ADC, 32 MHz internal oscillator, and an operating voltage range of 2.3 V to 5.5 V. The four 16-bit PWMs (vs. 10-bit PWM on legacy PIC16) deliver sub-microsecond pulse resolution, critical for dimmable LED lighting and switch-mode power supply control loops. The PIC16F1579 uses the enhanced mid-range core (49 instruction set) with a 16-level hardware stack and a configurable 32 kHz to 32 MHz internal oscillator. The 20-pin UQFN package with exposed pad provides low thermal resistance (~30 C/W typical) for surface-mount designs, while 4 KB of internal SRAM is not present on this part (1 KB). On-chip peripherals include Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), Numerically Controlled Oscillator (NCO), and Zero-Cross Detection (ZCD) blocks. Typical applications include LED lighting and color-mixing drivers, switch-mode power supply controllers, battery chargers, digital fans, and low-end motor control. The four independent 16-bit PWMs make it particularly well suited to full-bridge and half-bridge topologies where complementary PWM outputs and dead-band control are required. When designing with the PIC16F1579, pay attention to the UQFN exposed pad - it must be soldered to the PCB ground plane for electrical and thermal performance. Decouple VDD with a 100 nF ceramic capacitor placed within 3 mm of the pin. The 32 MHz maximum frequency requires VDD >= 2.5 V; at lower voltages the internal oscillator frequency is limited. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim
PIC16F1579-I/P - 32MHz 8-Bit MCU with PWM | Microchip
PIC16F1579-I/P

PIC16F1579-I/P - 32MHz 8-Bit MCU with PWM | Microchip

The Microchip Technology PIC16F1579-I/P is an 8-bit RISC microcontroller operating at 32 MHz, with 14 KB of Flash program memory and 1 KB of data RAM in a 20-pin through-hole DIP package. It combines four independent 16-bit PWM channels, a 10-bit ADC, a 5-bit DAC, and comparator-based analog functions for compact control and signal-processing designs. A microcontroller is a programmable integrated circuit containing a processor core, program memory, data memory, and peripherals. The PIC16 core belongs to Microchip's PIC16 family of embedded controllers, where each device executes firmware for control, measurement, communications, and automation tasks. Unlike a general-purpose computer, this MCU is configured around a small pin count, dedicated analog and timing peripherals, and low-power embedded operation. Four 16-bit PWM channels with independent timers support high-resolution motor, dimming, and power-control functions. The 10-bit ADC adds 1,024 possible quantization levels for analog measurement, while the 5-bit DAC provides a compact output for control or reference signals. The industrial-temperature grade and 20-PDIP through-hole package make the device suitable for designs assembled with conventional through-hole insertion. The 32 MHz PIC16 CPU core provides faster instruction execution than earlier 8-bit PIC16 designs, while 8K words of Flash program storage accommodate application code and configuration data. The architecture integrates timing, digital I/O, and analog conversion functions on one device, reducing the component count in applications that require multiple 16-bit waveform channels or mixed analog and digital control. Typical uses include LED lighting controllers, DC motor and stepper positioning systems, industrial instrumentation, environmental monitoring, compact power converters, and educational embedded-control platforms. The combination of four PWM channels, analog conversion, and a 5-bit DAC is particularly useful when a controller must measure an analog input and drive one or more precise timing outputs. When laying out the board, use the pin-description and electrical-characteristics tables in the manufacturer datasheet to assign each 20-pin DIP position. Keep analog inputs and the DAC output away from high-current switching paths, provide the specified decoupling near the supply pins, and route programming and reset signals for reliable operation. This product page combines the manufacturer device capabilities with practical selection guidance, verified sourcing links, application-specific design reasoning, and transparent notes on package, compliance, and replacement constraints for engineers evaluating the PIC16F1579-I/P.

RFQ İletişim
PIC16F1579-I/SS - 8-Bit MCU 32MHz 14KB Flash 16b PWM | Microchip
PIC16F1579-I/SS

PIC16F1579-I/SS - 8-Bit MCU 32MHz 14KB Flash 16b PWM | Microchip

The Microchip Technology PIC16F1579-I/SS is an 8-bit PIC16 microcontroller featuring a 32 MHz CPU, 14 KB of Flash program memory (8K x 14 words), 1 KB of RAM, and four 16-bit PWMs with independent timers, all integrated into a 20-pin SSOP package. It operates across a wide 2.3 V to 5.5 V supply range and integrates a 10-bit ADC, a 5-bit DAC, configurable logic cells, and multiple communication peripherals suited for mixed-signal embedded designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (typically Flash), data memory (RAM), and peripherals such as ADCs, timers, and communication interfaces. Within the broader taxonomy, MCUs sit under microcontrollers -> embedded processors -> semiconductors -> integrated circuits. The PIC16 family sits at the entry-level/mid-range tier of Microchip's 8-bit portfolio and is widely deployed in cost-sensitive, deterministic real-time control applications where low power, ease of programming, and a stable toolchain outweigh raw compute throughput. Key features of the PIC16F1579 include four independent 16-bit PWM channels for high-resolution control (suited to LED dimming, motor control, and digital power conversion), a 10-bit ADC with up to 17 channels, a 5-bit DAC, Complementary Waveform Generator (CWG), Configurable Logic Cells (CLC), Numerically Controlled Oscillator (NCO), and EUSART, I2C and SPI interfaces. The device supports up to 32 MHz operation via the internal HFINTOSC, achieving a 125 ns instruction cycle. Typical applications include full-spectrum RGBW LED lighting, fan and small DC motor PWM drivers, digital power supply control loops, sensor signal conditioning, and compact IoT edge nodes. The high-resolution PWMs (16-bit) and CWG make the part well-suited for bridge-tied load (BTL) or half-bridge driver topologies without an external timer IC. When designing with this part, choose the PIC16F1574/1575/1578/1579 family member based on pin count and required memory; PIC16F1579 is the full-memory (14 KB Flash) variant in a 20-pin package. Ensure the supply decoupling network uses a 100 nF low-ESR ceramic placed within 3 mm of VDD, and program the Configuration Words correctly to avoid unintended band-gap or oscillator lockups after reset. This page synthesizes distributor pricing, drop-in alternatives (PIC16F1578, PIC16F1829-I/SS, etc.), and practical design notes not collected in the manufacturer datasheet.

RFQ İletişim
PIC16F1579T-I/GZ - 8-Bit 32MHz 14KB Flash MCU | Microchip
PIC16F1579T-I/GZ

PIC16F1579T-I/GZ - 8-Bit 32MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16F1579T-I/GZ is an 8-bit PIC microcontroller in a 20-pin UQFN (4x4 mm) package with 14KB Flash, 1KB RAM, four 16-bit PWMs with independent timers, a 10-bit ADC, and a 32MHz internal oscillator. The trailing "/GZ" suffix denotes the 20-pin UQFN package, the "T" suffix denotes tape-and-reel packaging, and the "I" suffix denotes the industrial -40C to +85C operating temperature range. A PIC microcontroller is a RISC (Reduced Instruction Set Computer) based 8-bit MCU from Microchip's PIC16 family. PIC MCUs integrate CPU, Flash program memory, RAM data memory, EEPROM, peripherals (ADC, PWM, timers, communication), and a programmable I/O structure onto a single die. Within the broader taxonomy, PIC16F1579 belongs to the PIC16F157X family, which extends the mid-range PIC16 architecture by combining 16-bit PWM resolution with analog peripherals for high-resolution mixed-signal applications such as LED lighting and motor control. Key features include 14KB (8K x 14 words) self-programmable Flash program memory, 1KB RAM, four 16-bit PWMs with independent timers for fine-grained duty control, a 10-bit ADC with multiple channels, configurable logic cells (CLC), complementary waveform generator (CWG), and an internal 32MHz oscillator. The device also supports up to 18 I/O pins, multiple serial interfaces, and 5-bit DAC for analog signal generation. Architecturally, the PIC16F1579 uses Microchip's enhanced mid-range 8-bit core with a hardware 14-bit instruction set, 16-level hardware stack, and a 32kHz to 32MHz internal oscillator block with PLL. The four 16-bit PWMs use independent Timer2/4/6 modules for phase-shifted or synchronized outputs, while the 10-bit ADC operates up to 100 ksps. Configurable Logic Cells provide user-defined combinational and sequential logic gates without external components. Typical applications include high-resolution LED lighting drivers (RGBW and tunable white), DC-DC converters with digital control loops, BLDC and stepper motor commutation, digital power supplies, battery chargers with mixed-signal monitoring, and general-purpose mixed-signal embedded control. The 20-pin UQFN (4x4 mm) package suits compact PCB designs where board area is at a premium. When designing with the PIC16F1579T-I/GZ, ensure the exposed thermal pad on the UQFN package is soldered to the PCB ground plane for thermal and electrical performance. The device operates from 2.3V to 5.5V VDD; verify that VDD rise-time meets datasheet specification for proper brown-out reset behavior. For noise-sensitive analog applications, place the VDD/VSS decoupling network within 3 mm of the IC pins. This page synthesizes authorized distributor pricing, drop-in same-family alternatives, parametric comparisons, and practical design notes not found in the manufacturer datasheet alone, accelerating component evaluation for production engineers.

RFQ İletişim
PIC16F1579T-I/SS - 14KB Flash 32MHz 8-bit MCU with 16-bit PWM | Microchip
PIC16F1579T-I/SS

PIC16F1579T-I/SS - 14KB Flash 32MHz 8-bit MCU with 16-bit PWM | Microchip

The Microchip Technology PIC16F1579T-I/SS is an 8-bit PIC microcontroller built on a RISC architecture, delivering 32MHz CPU performance with 14KB (8K x 14) Flash program memory in a 20-pin SSOP package. The 'T' suffix denotes tape-and-reel packaging, while 'I' indicates the industrial temperature grade (-40C to +85C) and 'SS' identifies the 20-pin SSOP form factor (0.209 inch / 5.30mm body width). The part combines a 16-bit PWM peripheral set, a 10-bit ADC, a 5-bit DAC, and traditional PIC16 peripherals for mixed-signal embedded designs. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data memory, and integrated peripherals. The PIC16F1579 belongs to Microchip's PIC16 family of 8-bit mid-range MCUs, occupying the tier between baseline 8-pin PIC10/12 parts and 16-bit PIC24/dsPIC devices. It sits within the broader hierarchy of microcontrollers (MCU) -> microcontrollers and processors (MPU) -> semiconductor -> embedded system. This device integrates four 16-bit Pulse-Width Modulation (PWM) channels with independent timers, enabling fine-grained control for LED dimming, motor drive, and power-conversion feedback. Key features of the PIC16F1579T-I/SS include 14KB Flash, 1KB SRAM, 256 bytes EEPROM, a 10-bit ADC with multiple channels, a 5-bit DAC, four 16-bit PWM outputs, comparators, and the standard PIC16 peripheral set (UART, I2C/SPI, timers). The 32MHz internal oscillator supports instruction cycles up to 8MIPS, with a wide operating voltage range typically of 2.3V to 5.5V. The part is fabricated on Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word and hardware multiplier, providing efficient C-code density while retaining the legendary PIC deterministic interrupt latency. The integrated Complementary Output Generator (COG) complements the 16-bit PWM channels for half-bridge and full-bridge drive topologies without external logic. Typical applications include high-resolution LED lighting control, switched-mode power supply (SMPS) digital control loops, motor-control BLDC fan and pump drives, battery-charging front-ends, IoT sensor hubs, and general-purpose embedded control where 16-bit PWM resolution is needed. The 20-pin SSOP footprint balances compact PCB area with hand-solderable lead pitch for prototyping. When designing with the PIC16F1579, ensure the supply decoupling network (typically 100nF plus 10uF bulk) is placed within 5mm of the VDD pin, and that unused PWM outputs are tri-stated rather than left floating. The device's high-resolution PWM capability makes it especially suitable for digital LED dimming where 8-bit PWM visible flicker is unacceptable. This page synthesizes distributor pricing, same-brand drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers select the optimal PIC16F1579 variant for their application and confidently substitute compatible parts from Microchip's portfolio.

RFQ İletişim
PIC16F1613-E/ML - 8-bit MCU, 3.5KB Flash, 16-QFN | Microchip
PIC16F1613-E/ML

PIC16F1613-E/ML - 8-bit MCU, 3.5KB Flash, 16-QFN | Microchip

The Microchip Technology PIC16F1613-E/ML is an 8-bit PIC RISC microcontroller featuring 3.5KB of Flash program memory, housed in a 16-pin QFN (ML) package with an exposed pad for enhanced thermal dissipation. Operating from a wide 2.3V to 5.5V supply, this device targets embedded control of small motors and general-purpose applications in compact 8/14/16-pin form factors. The integrated 10-bit ADC with Computation (ADC2), Capture/Compare/PWM (CCP), 24-bit Signal Measurement Timer (SMT), and Zero-Cross Detection peripheral make it well suited for closed-loop control tasks. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash, RAM, EEPROM), and programmable I/O peripherals onto one silicon die. The PIC16F1613 belongs to the PIC16 family of 8-bit Harvard-architecture microcontrollers from Microchip, designed around the mid-range 14-bit instruction set with a RISC-like execution engine. Within the broader taxonomy it sits under: microcontroller -> embedded MCU -> 8-bit MCU -> PIC16 family -> PIC16F161x sub-family -> small-motor-control segment. Key features include 3.5KB self-programmable Flash, 256 bytes of SRAM, a 10-bit ADC, two PWM/CCP modules, and the Zero-Cross Detect peripheral that simplifies AC-line TRIAC or SSR triggering. The 24-bit SMT can capture time-of-flight or pulse-width events directly without CPU intervention, offloading the core in metering and motor-control loops. A factory-calibrated internal oscillator eliminates the need for an external crystal in cost-sensitive designs. Typical applications include small BLDC or brushed-DC motor controllers, solid-state relay drivers with zero-cross switching, LED lighting controllers, white-goods sensor nodes, and low-cost IoT edge devices where the small QFN-16 footprint saves PCB area. The 16-QFN package suits hand-held and space-constrained consumer products. When designing, ensure the exposed pad (EP) is soldered to a sufficient copper pour for thermal relief, since the QFN-16 has no leads to carry heat away from the die. Decouple VDD with a 100nF ceramic capacitor placed within 2 mm of the pin.

RFQ İletişim
PIC16F1613-E/ST - 8-bit 32MHz XLP MCU 3.5KB Flash | Microchip
PIC16F1613-E/ST

PIC16F1613-E/ST - 8-bit 32MHz XLP MCU 3.5KB Flash | Microchip

The Microchip Technology PIC16F1613-E/ST is an 8-bit PIC microcontroller from the PIC16F XLP family, featuring 3.5KB (2K x 14 words) of Flash program memory, 256 bytes of RAM, and a 32MHz internal oscillator, housed in a 14-pin TSSOP (ST) package rated for the -40C to +125C extended industrial temperature range (E suffix). An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals on one silicon die. The PIC16F architecture uses a RISC-based Harvard structure with a 14-bit instruction word optimized for deterministic real-time control. PIC MCUs belong to the broader microcontrollers > integrated circuits > semiconductors product hierarchy and are widely used in embedded control where low power, deterministic behavior, and small footprints are essential. The XLP (eXtreme Low Power) designation indicates sub-uA/MHz active currents and deep-sleep currents suitable for battery-powered and energy-harvesting designs. Key features include a 10-bit Analog-to-Digital Converter (ADC) with computation, up to 8-channel input multiplexing, Capture/Compare/PWM (CCP) peripherals, a 24-bit Signal Measurement Timer (SMT), Zero-Cross Detection, configurable logic cells (CLC), and a peripheral pin select (PPS) system. The device supports up to 32MHz CPU clock, a wide 2.3V to 5.5V operating voltage, and nanoWatt XLP sleep modes that drop quiescent current to the nanoampere range. Technically, the device uses an enhanced mid-range core with hardware multiply and a 16-level hardware stack, 256 bytes of EEPROM data memory, an Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART), two MSSP peripherals (I2C/SPI), and on-chip debug support via ICD. The 14-pin TSSOP package offers a small 4.4mm body width compatible with hand-soldered prototypes and high-density boards. Typical applications include small motor control (low-cost BLDC and brushed DC), LED lighting drivers, household appliances, IoT sensor nodes, capacitive-touch user interfaces (via mTouch), smoke detectors, and consumer white goods. The combination of 24-bit SMT, zero-cross detect, and CCP makes the PIC16F1613 particularly suited to closed-loop motor and lighting control without external timers. When designing with this MCU, plan for decoupling caps on VDD/AVDD and follow EOC access ports for in-circuit programming. The PPS block requires careful pin remapping configuration in software; verify peripheral-to-pin mappings in Microchip's MPLAB Xpress / MCC code configurator before PCB layout sign-off. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim
PIC16F1613-I/ML - 8-Bit MCU, 3.5KB Flash, 32MHz, 16-QFN | Microchip
PIC16F1613-I/ML

PIC16F1613-I/ML - 8-Bit MCU, 3.5KB Flash, 32MHz, 16-QFN | Microchip

The Microchip Technology PIC16F1613-I/ML is an 8-bit PIC16F microcontroller featuring 3.5KB (2K x 14) of Flash program memory, 256 bytes of RAM, and a 32 MHz internal oscillator, all housed in a 16-pin QFN (4x4 mm) package with an exposed thermal pad. It belongs to the PIC16(L)F161X family designed for embedded control of small motors and general-purpose applications. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and a rich set of integrated peripherals such as timers, ADCs, and communication interfaces. The PIC16F1613 sits in Microchip's XLP (eXtreme Low Power) family, optimized for battery-powered and energy-harvesting designs where quiescent current in the nanoampere range is critical. It is part of the broader PIC16 mid-range 8-bit architecture, which balances cost, simplicity, and deterministic real-time performance. Key features include Core Independent Peripherals (CIPs) such as the 24-bit Signal Measurement Timer (SMT), Configurable Logic Cell (CLC), Zero-Cross Detector (ZCD), and Complementary Waveform Generator (CWG). These offload timing-critical tasks from the CPU, enabling deterministic hardware-driven control. The device integrates a 10-bit ADC with acquisition, CCP/PWM modules, multiple communication peripherals, and supports operating voltages from 2.5V to 5.5V across -40C to +85C industrial temperature range. The PIC16F1613 uses a RISC Harvard-architecture CPU with 49 instructions, executing most instructions in a single clock. With a 32 MHz internal oscillator it delivers 8 MIPS throughput. The Flash memory supports self-programming and high-voltage In-Circuit Serial Programming (ICSP) for flexible firmware updates in production or field service. Typical applications include small motor control (BLDC, stepper, brushed DC), LED lighting control, sensor signal conditioning, household appliances, IoT edge nodes, and battery-powered instruments. The combination of CIPs and low-power modes makes it well suited to designs that must run complex timing or signal-processing tasks while keeping average current below 100 uA. When designing with this device, allocate pins carefully: the 16-QFN exposes only 12 general-purpose I/O plus dedicated VDD/VSS/ICSP pins. Use the exposed pad (EP) as the primary thermal and electrical ground tie-down to maximize power dissipation and EMI performance. Verify that your IDE toolchain (MPLAB X, XC8 compiler) and programmer (PICkit, ICD) match the device revision. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, supporting engineers in component selection and procurement.

RFQ İletişim
PIC16F1613-I/P - 8-bit MCU, 3.5KB Flash, 32MHz | Microchip
PIC16F1613-I/P

PIC16F1613-I/P - 8-bit MCU, 3.5KB Flash, 32MHz | Microchip

The Microchip Technology PIC16F1613-I/P is an 8-bit PIC microcontroller delivering 3.5KB Flash program memory, 256 bytes RAM, and a maximum CPU clock of 32MHz in a 14-pin PDIP through-hole package. It belongs to the PIC16F161X family and provides unique on-chip peripherals for embedded control of small motors and general-purpose applications, including a 10-bit A/D converter, CCP module, 24-bit Signal Measurement Timer, Zero-Cross Detector, and Complementary Waveform Generator. A microcontroller (MCU) is an integrated circuit that combines a CPU core, volatile and non-volatile memory, and configurable peripherals on a single silicon die. Within the broader component taxonomy, the PIC16F1613 is a member of the 8-bit RISC microcontroller family, which falls under the larger category of microcontrollers and ultimately the integrated circuit hierarchy. The "PIC" prefix denotes Microchip's proprietary Peripheral Interface Controller architecture, while the "16F" series is the company's mainstream mid-range family, offering a balanced trade-off between cost, performance, and peripheral integration. Key differentiating features of the PIC16F1613 include the 24-bit Signal Measurement Timer (SMT) for high-resolution time-of-flight and pulse-width measurement, the on-chip Complementary Waveform Generator (CWG) for motor drive dead-band generation, and integrated Zero-Cross Detection (ZCD) for TRIAC phase-angle control. The device operates from 2.3V to 5.5V across the industrial -40C to +85C temperature range, with low-power XLP (eXtreme Low Power) Sleep modes in the nanoWatt range, making it well-suited for line-powered and battery-backed motor control designs. The PIC16F1613 uses a 14-bit instruction word with a Harvard architecture, two hardware stack levels, and 49 instruction types. On-chip debug is supported through the standard ICSP interface, and the device is fully supported by the MPLAB X IDE and XC8 compiler toolchain. Memory endurance is rated at 100K erase/write cycles for Flash and 1M for EEPROM, with 40-year data retention. Typical applications include low-cost BLDC/PMSM sensorless fan control, small appliance motor drives (washing machine pumps, refrigerator fans), TRIAC dimmer circuits with zero-cross triggering, general-purpose white goods control boards, and 14-pin drop-in upgrades for legacy PIC16F and PIC12F designs. The complementary waveform generator and zero-cross detect peripherals make this MCU uniquely suited to motor and lighting control without external driver logic. When designing with the PIC16F1613-I/P, allocate adequate decoupling on VDD (100nF ceramic close to each VDD pin), keep the analog reference AVSS/AVDD pair isolated if the ADC is in use, and route the CWG outputs through adequate gate-driver impedance to the power stage. The 14-pin PDIP footprint is convenient for prototyping and breadboarding but consider the QFN-16 (-I/ML) or TSSOP-14 (-I/ST) variants for volume production. This page synthesizes distributor pricing, parametric comparison data, drop-in alternatives, and practical design notes not found in any individual datasheet page, giving embedded engineers a single reference for sourcing and design-in decisions.

RFQ İletişim
PIC16F1613-I/SL - 8-Bit 32MHz MCU 3.5KB Flash | Microchip
PIC16F1613-I/SL

PIC16F1613-I/SL - 8-Bit 32MHz MCU 3.5KB Flash | Microchip

The Microchip Technology PIC16F1613-I/SL is an 8-bit PIC16 microcontroller built on Microchip's enhanced mid-range core, delivering 32 MHz CPU performance with 3.5 KB (2K x 14) of Flash program memory in a 14-pin SOIC package. The device integrates 256 bytes of SRAM, a high-precision 32 MHz internal oscillator, a 10-bit Analog-to-Digital Converter (ADC), a 5-bit Digital-to-Analog Converter (DAC), Capture/Compare/PWM (CCP) modules, 24-bit Signal Measurement Timer (SMT), Zero-Cross Detect, and Complementary Waveform Generator (CWG) peripherals tailored for embedded control of small motors and general-purpose applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash, SRAM), peripherals (ADC, timers, communication blocks), and I/O onto one die. Within Microchip's PIC® family hierarchy, this part belongs to the PIC16F1xxx enhanced mid-range class, which sits between the baseline PIC10/12/14 family and the 16-bit dsPIC®/PIC24 family. The PIC16F1613's XLP™ (eXtreme Low Power) technology targets battery-friendly designs, drawing currents in the microamp range during sleep. Key features of the PIC16F1613-I/SL include: 14 SOIC package for through-hole-style surface-mount assembly on standard 0.154-inch SOIC land patterns; operating voltage range of 2.3V to 5.5V (F-version); up to 32 MHz internal oscillator with ±1% typical accuracy; on-chip 10-bit ADC with up to 8 channels; 5-bit DAC; and Core Independent Peripherals (CIPs) that offload tasks from the CPU. The -I suffix denotes the industrial temperature grade (-40°C to +85°C). Technically, the PIC16F1613 uses a 14-bit instruction word architecture with single-cycle execution except for branches. Its CWG and SMT peripherals enable closed-loop motor control without CPU intervention, making the device attractive for small BLDC and stepper designs. The internal 32 MHz oscillator eliminates external crystals in many applications, reducing BOM cost and PCB area. Typical applications include small motor control (fans, pumps, appliance drives), LED lighting controllers, sensor signal conditioning, battery-powered IoT nodes, and general-purpose embedded control in consumer and industrial products. The XLP low-power modes also make it suitable for energy-harvesting or remote-sensor designs. When designing with the PIC16F1613, observe the 2.3V minimum VDD at 16 MHz (higher frequencies may require higher VDD). Provide adequate bulk decoupling on VDD and use Microchip's MPLAB X IDE with XC8 compiler for development. The 14-pin SOIC footprint is compatible with many legacy PIC16F parts, simplifying board-level migration. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers compare, select, and source the PIC16F1613-I/SL with confidence.

RFQ İletişim
PIC16F1613-I/ST - 8-Bit MCU, 32MHz, 3.5KB Flash, XLP | Microchip
PIC16F1613-I/ST

PIC16F1613-I/ST - 8-Bit MCU, 32MHz, 3.5KB Flash, XLP | Microchip

The Microchip Technology PIC16F1613-I/ST is an 8-bit PIC® XLP™ flash microcontroller with 3.5KB (2K x 14 words) of program memory, 256 bytes of RAM, and a maximum CPU clock of 32MHz, housed in a 14-pin TSSOP package. It operates from 2.3V to 5.5V across the industrial -40C to +85C temperature range, and integrates a 10-bit A/D converter, Capture/Compare/PWM (CCP) modules, a 24-bit Signal Measurement Timer (SMT), zero-cross detection, and peripheral pin select for flexible signal routing. An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, program memory (Flash), data memory (RAM), and peripherals on one die. Within the broader semiconductor taxonomy, an MCU is a subset of microcontrollers, which in turn belong to the embedded processor class of integrated circuits. PIC microcontrollers use a RISC architecture with a small, fixed instruction set optimized for deterministic real-time control in cost- and power-sensitive embedded designs. The "XLP" (eXtreme Low Power) designation indicates Microchip's family of nanoWatt technology parts with sub-uA sleep currents for battery-powered applications. Key differentiating features include the integrated 24-bit SMT for high-resolution time-of-flight, angle, or duty-cycle measurement in motor and lighting control, and on-chip zero-cross detect for TRIAC-based AC dimming without external zero-cross circuitry. The peripheral pin select (PPS) mapper allows remapping of digital peripherals to multiple I/O pins, simplifying PCB layout. With eXtreme Low Power (XLP) technology, the device typically consumes <30 nA in sleep with brown-out reset enabled, making it well-suited for always-on, battery-backed, or energy-harvesting systems. The PIC16F1613 uses an enhanced mid-range 8-bit RISC core with a hardware multiplier, 16-level stack, and a 49-instruction set optimized for C and assembly development under MPLAB X IDE with the XC8 compiler. In-circuit debugging is supported via the two-wire ICD interface, and in-circuit serial programming (ICSP) allows firmware updates after PCB assembly. The 10-bit ADC supports up to 8 channels with an internal fixed voltage reference and a sample-and-hold front end. Typical applications include small brushed-DC and stepper motor control, LED lighting with TRIAC dimming, capacitive-touch user interfaces, sensor signal conditioning, general-purpose digital I/O expansion, and low-power IoT edge nodes. The TSSOP-14 footprint makes it attractive where PCB area is constrained and pin count beyond 8 is needed. When designing with this part, plan current budget for active and sleep modes against battery capacity, place a 0.1 uF decoupling capacitor within 5 mm of VDD, and reserve one I/O pin as ICSPCLK/ICSPDAT for in-circuit serial programming. Note that the PIC16F1613 has 14 pins; if more I/O is required, the PIC16F1613 family also offers 8- and 16-pin variants on the same silicon, with code compatibility preserved. This page synthesizes distributor pricing for the PIC16F1613-I/ST, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim
PIC16F1613T-I/SL - 8-bit MCU, 32MHz, 3.5KB Flash, 14-SOIC | Microchip
PIC16F1613T-I/SL

PIC16F1613T-I/SL - 8-bit MCU, 32MHz, 3.5KB Flash, 14-SOIC | Microchip

The Microchip Technology PIC16F1613T-I/SL is an 8-bit PIC16 microcontroller from the PIC XLP 16F family, delivering 32 MHz CPU performance with 3.5 KB (2K x 14 words) of Flash program memory and an internal high-speed oscillator, housed in a 14-pin SOIC (SL) tape-and-reel package. The T-suffix indicates tape and reel packaging, the I-suffix denotes the industrial temperature grade (-40C to +85C), and SL is the 14-pin narrow-body SOIC package code. According to the Microchip product page, this device belongs to the PIC16(L)F161X family that delivers on-chip features targeted at small motor and general-purpose embedded control applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, volatile RAM, digital I/O, and on-chip peripherals such as timers, ADC, and communication interfaces. The PIC16F1613 is built on Microchip's enhanced mid-range 8-bit RISC architecture, which falls under the hypernym hierarchy: microcontroller -> embedded processor -> semiconductor. The PIC16 family targets low-power, cost-sensitive applications that require deterministic instruction execution and easy in-system programmability. Key features include 3.5 KB Flash program memory, 256 bytes of RAM, 10-bit Analog-to-Digital Converter (ADC), Capture/Compare/PWM (CCP), 24-bit Signal Measurement Timer (SMT), Zero-Cross Detection, on-chip temperature sensor, and eXtreme Low Power (XLP) technology with multiple low-power sleep modes that make the device suitable for battery-powered applications. The 32 MHz internal oscillator eliminates the need for an external crystal in many designs. In the system design hierarchy, the PIC16F1613 operates at 2.5 V / 3.3 V / 5 V logic, supports 12 I/O pins, and uses the standard in-circuit serial programming (ICSP) interface for firmware updates. The architecture is a RISC design with a single-cycle instruction execution, giving an effective throughput of 8 MIPS at 32 MHz, and the Harvard bus separates program and data memory paths. The 14-SOIC package offers excellent thermal performance and is compatible with hand-soldering and standard reflow profiles. Typical applications include small motor control (BLDC, brushed DC, fan speed control), white goods and appliance control, LED lighting controllers, low-power IoT sensor nodes, and general-purpose 8-bit replacement of legacy PIC designs. The device's XLP characteristics make it especially well suited to battery-powered designs such as remote controls and wireless sensor end nodes. When designing with this part, place a 0.1 uF decoupling capacitor close to the VDD pin and use the internal oscillator by default to reduce BOM cost. If your application requires IEC 60730 or similar functional safety, review the Class B safety library that Microchip provides for the PIC16 family. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet, helping procurement and engineering teams make a faster, more confident decision.

RFQ İletişim
PIC16F1614-E/ML - 8-bit 32MHz 7KB Flash MCU | Microchip | QFN-16
PIC16F1614-E/ML

PIC16F1614-E/ML - 8-bit 32MHz 7KB Flash MCU | Microchip | QFN-16

The Microchip Technology PIC16F1614-E/ML is an 8-bit PIC16 microcontroller from the PIC16(L)F161x family, featuring 7 KB (4K x 14 words) of Flash program memory, 32 MHz internal oscillator operation, and a 16-pin QFN package with exposed thermal pad. The part integrates on-chip peripherals unique to small motor control and general-purpose embedded designs, including a 10-bit ADC, Capture/Compare/PWM (CCP), 24-bit Signal Measurement Timer (SMT), Zero-Cross Detect, and the eXtreme Low Power (XLP) picoPower technology for energy-conscious applications. An 8-bit microcontroller (MCU) is a programmable processor that fetches instructions from internal Flash, executes them on an 8-bit data path, and interfaces with the physical world through on-chip peripherals such as ADCs, timers, PWM modules, and communication controllers. Within the broader taxonomy, the PIC16F1614 sits in the category hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. Microchip's PIC16 line targets cost-sensitive, deterministic control applications where the simplicity of an 8-bit core and the maturity of the MPLAB X toolchain outweigh the throughput of 32-bit ARM Cortex-M devices. Key features of the PIC16F1614-E/ML include 7 KB Flash program memory, 256 bytes of data EEPROM, 512 bytes of SRAM, up to 14 I/O pins, a 10-bit ADC with multiple channel options, multiple PWM/CCP modules, the 24-bit SMT for high-resolution time measurement, and an operating voltage range of approximately 2.3 V to 5.5 V. The device supports In-Circuit Serial Programming (ICSP) via two pins and integrates an internal 32 MHz oscillator that eliminates the external crystal footprint in many designs. The architecture is built on Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word, single-cycle execution for most instructions (excluding branches), and a hardware multiplier. The XLP technology minimizes active and sleep current consumption, making the part suitable for battery-powered and energy-harvesting designs that spend most of their time in sleep mode. Typical applications include small brushed DC motor control, LED lighting drivers, fan controllers, low-end consumer appliances, sensor signal conditioning, and general-purpose IoT edge nodes. The combination of dedicated motor-control peripherals (CCP + SMT) and 10-bit ADC simplifies closed-loop control loops on a single chip. When designing with this part, ensure the exposed pad on the QFN-16 package is soldered to the PCB ground plane for thermal dissipation and mechanical reliability. The internal oscillator is factory-trimmed; for timing-critical applications such as UART communication, verify the baud-rate error at the chosen VDD and temperature range against the datasheet DC and AC characteristics. This page synthesizes distributor pricing from DigiKey, Mouser, and Octopart, identifies drop-in same-package alternatives from Microchip's own PIC16 portfolio, and provides practical design notes that are not found in the manufacturer datasheet alone.

RFQ İletişim
PIC16F1614-E/P - 8-Bit MCU, 7KB Flash, 32MHz | Microchip
PIC16F1614-E/P

PIC16F1614-E/P - 8-Bit MCU, 7KB Flash, 32MHz | Microchip

The Microchip PIC16F1614-E/P is an 8-bit PIC16 microcontroller featuring 7KB Flash program memory and 32MHz internal oscillator speed, housed in a 14-pin PDIP through-hole package. The -E temperature grade designates industrial range from -40C to +125C operation. It belongs to the PIC16F161X family which integrates a 10-bit ADC, Capture/Compare/PWM (CCP), 24-bit Signal Measurement Timer (SMT), Zero-Cross Detection, and Math Accelerator peripherals. An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory (Flash), data memory (RAM), and integrated peripherals on one silicon die. PIC microcontrollers use a RISC-based Harvard architecture where program and data memory have separate buses, enabling single-cycle instruction execution at the oscillator frequency divided by 4. Within the broader semiconductor taxonomy, an MCU sits under microcontroller -> embedded processor -> digital IC -> semiconductor. Key features include 7KB (4K x 14 words) of self-programmable Flash, 512 bytes SRAM, 256 bytes EEPROM, an enhanced mid-range 16-bit instruction set, and XLP (eXtreme Low Power) technology for sleep currents in the microamp range. The device operates from 2.5V to 5.5V and integrates Core Independent Peripherals such as CWG, NCO, and DSM that offload timing-critical functions from the CPU. The 24-bit SMT peripheral enables precision time/frequency measurement of digital signals, supporting tachometer, RPM sensing, and capacitive touch decoding applications without CPU overhead. The integrated Math Accelerator executes 32-bit signed/unsigned multiplication and division in hardware, accelerating closed-loop control loops relative to firmware-based math. Typical applications include small DC motor and BLDC closed-loop control, fan speed controllers, LED lighting drivers with dimming, sensor signal conditioning, and general-purpose embedded control in industrial and consumer appliances. The 14-pin PDIP package simplifies breadboard prototyping and through-hole assembly for low-volume production. When designing with this device, allocate pin budget carefully: only 14 pins are available and several are shared between analog inputs and digital I/O. Decouple VDD with at least 100nF plus 10uF bulk capacitance placed within 5mm of the supply pins, and use the PPS (Peripheral Pin Select) feature to remap peripherals when needed.

RFQ İletişim
PIC16F1614-E/SL - 8-Bit MCU, 7KB Flash, 32MHz | Microchip
PIC16F1614-E/SL

PIC16F1614-E/SL - 8-Bit MCU, 7KB Flash, 32MHz | Microchip

The Microchip Technology PIC16F1614-E/SL is an 8-bit PIC microcontroller from the PIC16F161x family, featuring 7KB (4K x 14) of Flash program memory and 512 bytes of SRAM in a 14-pin SOIC package. It operates at up to 32MHz clock speed with 10-bit ADC capability, and supports an operating voltage range suitable for battery-powered and low-power designs via Microchip's eXtreme Low Power (XLP) technology. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash/ROM), data memory (RAM), and programmable peripherals such as timers, ADC, communication interfaces, and GPIO. Within the broader semiconductor taxonomy, an 8-bit MCU sits under microcontroller -> embedded processor -> integrated circuit. The PIC16F161x series specifically targets embedded control of small motors and general-purpose applications in 8/14/20-pin packages, integrating features such as 10-bit A/D, Capture/Compare/PWM (CCP), 24-bit Signal Measurement Timer (SMT), Zero-Cross Detection, and Complementary Waveform Generator for power-conversion control loops. Key differentiating features of the PIC16F1614-E/SL include on-chip 10-bit ADC with computation, hardware limit timers for synchronous motor control, support for up to 32MHz internal oscillator operation, and integrated peripherals that reduce external component count. The -E (extended) temperature grade supports -40C to +125C operation, enabling industrial and automotive under-hood applications. The XLP technology delivers low-power Run and Sleep currents that suit battery-powered edge devices with multi-year lifetime requirements. The architecture uses a Harvard RISC core with a single-cycle instruction pipeline and hardware multiplier-free instruction set, achieving deterministic interrupt response and fast context switching. On-chip peripherals are routed through Microchip's Peripheral Pin Select (PPS) subsystem, giving flexibility in PCB layout when migrating between 8, 14, and 20-pin variants within the PIC16F161x family. Typical applications include small BLDC/PMSM motor control (fans, pumps, appliance blowers), LED lighting drivers with analog dimming, sensor interface boards, and general-purpose IoT edge nodes where 7KB Flash and 512B RAM are sufficient. The Zero-Cross Detection and 24-bit SMT simplify TRIAC-dimming and energy-metering front ends. When designing with the PIC16F1614-E/SL, ensure the ICSP programming pins are accessible on the PCB and that VDD decoupling uses a 100nF ceramic placed within 5mm of the supply pin. For analog accuracy, configure the ADC with adequate acquisition time per the datasheet's impedance guidelines. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing a single reference for sourcing, replacement, and engineering decisions.

RFQ İletişim
PIC16F1614-E/ST - 8-bit 32MHz 7KB Flash MCU 14-TSSOP | Microchip
PIC16F1614-E/ST

PIC16F1614-E/ST - 8-bit 32MHz 7KB Flash MCU 14-TSSOP | Microchip

The Microchip Technology PIC16F1614-E/ST is an 8-bit Flash microcontroller from the PIC16(L)F161X family, delivering 32 MHz CPU performance with 7 KB (4K x 14) of Flash program memory and 512 bytes of SRAM, packaged in a 14-pin TSSOP (Thin Shrink Small Outline, 4.40 mm body width) industrial-temperature-range variant. A microcontroller (MCU) is an integrated circuit combining a CPU core, program memory, data memory, and configurable peripherals on a single die. Within the semiconductor hierarchy, the PIC16F1614 belongs to the 8-bit MCU class, the PIC16 family, and the broader PIC® XLP™ (eXtreme Low Power) product line. These MCUs target low-power and mixed-signal embedded applications in 8/14/20-pin packages where small form factor, on-chip peripherals, and standby current minimization are essential. Key features include a hardware 10-bit ADC with multiple channel options, Capture/Compare/PWM (CCP) peripherals, a 24-bit Signal Measurement Timer (SMT) for precise period/pulse measurement, Zero-Cross Detection (ZCD), and on-chip Complementary Waveform Generator (CWG) peripherals intended for motor-control and lighting applications. The device integrates a configurable Logic Cell, multiple timers, and serial peripherals supporting I2C, SPI, and EUSART communication, with XLP sleep current typically in the nanoamp range to extend battery life in low-duty-cycle systems. Architecturally, the PIC16F1614 uses an enhanced mid-range 8-bit core with a 14-bit instruction word, a single-cycle hardware multiply, and a vectored interrupt controller supporting prioritized events. The industrial -40C to +125C operating range (-E suffix) makes it suitable for harsh-environment deployments, while the 14-pin TSSOP footprint offers thermal headroom and hand-solder-friendly lead pitch. Internal oscillator calibration and on-chip voltage reference options reduce external component count. Typical applications include small DC motor and fan speed control, LED lighting ballast control with dimming, fan RPM measurement via 24-bit SMT, household appliance control boards, general-purpose sensor hubs, and IoT edge nodes where XLP sleep modes preserve coin-cell battery life. The 14-pin TSSOP package suits compact PCBAs with limited board area. When designing with the PIC16F1614-E/ST, ensure the supply decoupling network uses a 100 nF ceramic capacitor within 5 mm of VDD and a bulk 1 uF or larger tantalum/ceramic capacitor; place the decoupling reference (AVDD/AVSS) bypass capacitor close to the analog pins to preserve ADC accuracy. Avoid routing high-frequency switching traces adjacent to the ADC reference pins to prevent digital noise coupling into measurement channels. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone, providing a focused reference for procurement, design, and qualification decisions.

RFQ İletişim
PIC16F1614-I/ML - 8-bit MCU, 7KB Flash, 32MHz, 16-QFN | Microchip
PIC16F1614-I/ML

PIC16F1614-I/ML - 8-bit MCU, 7KB Flash, 32MHz, 16-QFN | Microchip

The Microchip Technology PIC16F1614-I/ML is an 8-bit RISC Flash microcontroller from the PIC16 (L)F161x family, featuring 7 KB of program Flash, 512 bytes of RAM, and 32 MHz maximum CPU clock, housed in a 16-pin QFN (4x4 mm) package with an exposed thermal pad. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data path, integrating a CPU, non-volatile program memory (Flash), volatile data memory (RAM), and on-chip peripherals such as timers, ADC, communication interfaces, and I/O. The PIC16F1614 belongs to the eXtreme Low Power (XLP) PIC16F family from Microchip, targeting compact, low-power embedded control with motor-control-oriented peripherals such as CCP, 24-bit Signal Measurement Timer (SMT), Zero-Cross Detect, and Configurable Logic Cells (CLC) — features that place this MCU in the broader category of microcontrollers -> embedded controllers -> semiconductors. The PIC16F1614 integrates a 10-bit ADC with computation (ADC2), two PWM channels, two comparators, two CLCs, and a wide 1.8 V to 5.5 V operating range that supports 2.5 V / 3.3 V / 5 V systems. According to the Microchip product page, the device delivers on-chip features unique to embedded control of small motors and general-purpose applications in 8 / 14 / 20-pin variants, with the I/ML package representing the 14/16-pin QFN option. Peripherals communicate through PPS (Peripheral Pin Select) on most pins, simplifying PCB routing in compact designs. The core uses Microchip's enhanced mid-range 8-bit CPU with hardware stack and 14-bit instruction word, executing most instructions in a single cycle. Internal oscillator options (HFINTOSC up to 32 MHz with PLL, LFINTOSC 31 kHz) reduce external component count and enable rapid prototyping. The device's XLP features — nanoWatt XLP sleep currents below 50 nA typical, IDLE/DOZE current management, and ultra-low-power wake — make it well-suited to battery-powered nodes that spend most of their life in sleep. Typical applications include BLDC / brushed-DC small-motor control, LED lighting drivers with zero-cross dimming, fan and pump control, sensor-interface front-ends with on-chip signal conditioning, and general-purpose 8-bit embedded control where footprint, BOM count, and power budget dominate the BOM. The 4x4 mm QFN fits compact PCBs in space-constrained appliances and IoT edge nodes. When designing with this device, allocate the PPS remap early in firmware planning because most digital peripherals can be routed to multiple pins. Always check that the chosen ADC channel and PWM output do not collide on the same physical pin, and provide a 0.1 µF + bulk decoupling pair adjacent to the VDD pin. This page synthesizes distributor pricing, drop-in QFN-16 alternatives from Microchip's PIC16 family, application guidance, and practical design notes that are not present on the bare manufacturer product page.

RFQ İletişim
PIC16F1614-I/P - 8-Bit MCU, 7KB Flash, 32MHz, 14-PDIP | Microchip
PIC16F1614-I/P

PIC16F1614-I/P - 8-Bit MCU, 7KB Flash, 32MHz, 14-PDIP | Microchip

The Microchip Technology PIC16F1614-I/P is an 8-bit RISC microcontroller from the PIC16F161X family, offering 7 KB (4K x 14 words) of Flash program memory and 512 bytes of SRAM in a 14-pin PDIP (0.300 inch, 7.62 mm) through-hole package. The device operates up to 32 MHz instruction clock, delivers 10-bit ADC with up to 8 channels, and supports Core Independent Peripherals including Configurable Logic Cells (CLC), Zero-Cross Detector (ZCD), 24-bit Signal Measurement Timer (SMT), and Complementary Waveform Generator (CWG) for embedded motor and lighting control. It operates from 2.3V to 5.5V with eXtreme Low Power (XLP) Sleep currents in the nanoamp range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, RAM, and peripheral interfaces. The PIC16F1614 belongs to the 8-bit RISC MCU class, where each instruction executes in one instruction cycle, providing deterministic timing critical for real-time control. Within the broader taxonomy, it sits in the 8-bit microcontroller category under microcontrollers and integrated circuits. It is pin-compatible with PIC16F1613 in the same package, enabling design scalability with shared PCB layouts. Key differentiating features include four Configurable Logic Cells that replace external discrete glue logic, a 24-bit SMT for precise time and pulse measurement, a Zero-Cross Detector for AC line synchronization, and a Complementary Waveform Generator producing complementary PWM outputs with programmable dead-band for half-bridge motor drive. These features reduce external component count and BOM cost in motor control, lighting ballast, and digital power conversion applications. Technically, the PIC16F1614 uses Microchip's enhanced mid-range core with a hardware multiply and 16-level stack. Memory includes 7 KB self-programmable Flash, 512 B SRAM, and 256 B EEPROM. Peripherals include up to 8x 10-bit ADC channels, two PWM modules (10-bit), two CCP modules, two USART, two SPI, two I2C, and up to 12 I/O pins with interrupt-on-change. This part fits low-power fan control, sensor interfacing, BLDC motor commutation, AC phase control, LED lighting, and IoT endpoint nodes. For battery-powered designs, XLP Sleep mode with nA-level current enables multi-year coin-cell operation in sensor beacons. The 14-PDIP package eases prototyping and hobbyist use. When designing, prioritize PCB trace layout for ADC analog inputs (guard ring, ground plane separation), and use the CWG module for half-bridge gate drive rather than a discrete driver when possible. Always validate PWM frequency against MOSFET/IGBT switching losses. This page synthesizes the Microchip PIC16F1614-I/P datasheet, real-time distributor pricing from DigiKey/Mouser/LCSC, drop-in same-family alternatives from the Site MPN list, and practical design notes not present in the manufacturer datasheet alone.

RFQ İletişim
PIC16F1614-I/SL - 8-Bit 32MHz MCU 7KB Flash | Microchip
PIC16F1614-I/SL

PIC16F1614-I/SL - 8-Bit 32MHz MCU 7KB Flash | Microchip

The Microchip Technology PIC16F1614-I/SL is an 8-bit PIC® XLP™ flash microcontroller featuring a 32MHz CPU, 7KB (4K x 14) program flash, 512 bytes SRAM, and a 14-pin SOIC package. It integrates a 10-bit ADC, Configurable Logic Cell (CLC), Complementary Output Generator (COG), Signal Measurement Timer (SMT), Zero-Cross Detect (ZCD), and CCP peripherals designed for embedded control of small motors and general-purpose applications. An 8-bit flash microcontroller (MCU) is a small, self-contained computer-on-a-chip that integrates an 8-bit CPU, non-volatile flash program memory, volatile SRAM, and a configurable peripheral set into a single IC. Within the broader hierarchy, 8-bit MCUs sit below 16-bit and 32-bit MCUs in computational throughput, but excel in deterministic real-time control, ultra-low power operation (the PIC16 XLP family is engineered for nanoWatt standby currents), and BOM cost minimization. They are the dominant choice for sensor nodes, motor control loops, user-interface handling, and battery-powered devices where code density and predictability outweigh raw MIPS. Key features include 32MHz internal oscillator operation, 10-bit ADC with computation, 24-bit Signal Measurement Timer (SMT) for precise time-of-flight and edge counting, Zero-Cross Detect for AC line synchronization, Configurable Logic Cell, Complementary Output Generator, and nanoWatt XLP power management. The 14-pin SOIC (SL) package is a JEDEC-standard 3.90mm-wide surface-mount footprint that is breadboard-friendly and reflow-solderable, suitable for both prototyping and high-volume production. The PIC16F1614 uses a 14-bit modified Harvard RISC architecture with a 16-level hardware stack, single-cycle hardware multiply, and C-compiler-friendly instruction set. The XLP nanoWatt technology delivers sub-microamp sleep modes enabling multi-year battery life in IoT edge nodes, while the integrated SMT 24-bit timer and CLC permit hardware-level signal processing without CPU intervention, freeing the core for system-level logic. Typical applications include small DC and stepper motor control (BLDC, brushed DC), fan control, TRIAC dimming with ZCD, sensor signal conditioning, appliance controls, LED lighting drivers, IoT edge nodes, and general-purpose embedded control. The industrial-grade -40C to +85C temperature range supports factory and outdoor deployments. When designing with this device, allocate sufficient code-space headroom (5-10% free flash for field updates), provide adequate Vdd decoupling per the datasheet reference circuit, and verify that the chosen CCP/COG/SMT peripheral combination fits the application timeline within the 32MHz instruction budget. This page synthesizes distributor pricing from DigiKey/Mouser/LCSC, parametric drop-in alternatives in the same SOIC-14 footprint, and practical design notes that go beyond what is reprinted on standard catalog pages.

RFQ İletişim
PIC16F1614-I/ST - 8-Bit MCU, 7KB Flash, 32MHz, TSSOP-14 | Microchip
PIC16F1614-I/ST

PIC16F1614-I/ST - 8-Bit MCU, 7KB Flash, 32MHz, TSSOP-14 | Microchip

The Microchip Technology PIC16F1614-I/ST is an 8-bit Flash microcontroller from the PIC16F161X family, integrating 7KB of program memory (4K x 14-bit words), 512 bytes of RAM, and a 32 MHz internal oscillator in a 14-pin TSSOP surface-mount package. It combines a 10-bit ADC, Capture/Compare/PWM (CCP), a 24-bit Signal Measurement Timer (SMT), Zero-Cross Detect, and a math accelerator, providing on-chip resources for embedded control of small motors and general-purpose applications. The -I/ST suffix designates the industrial temperature grade (-40C to +85C) and TSSOP-14 packaging. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (Flash or ROM), volatile data memory (RAM), and integrated peripherals such as timers, ADCs, and communication interfaces. Within the broader taxonomy, the PIC16F1614 sits in the 8-bit microcontroller class (PIC16 -> 8-bit PIC MCU -> microcontroller -> embedded processor -> semiconductor). It uses Microchip's enhanced mid-range core with a 14-bit instruction word, balancing code density with deterministic interrupt latency for real-time control. Key features include 7KB self-programmable Flash, multiple PWM/CCP channels for motor and LED control, a 24-bit SMT capable of precise time-of-flight or frequency measurements, Zero-Cross Detect for AC-line-synchronized switching, and Configurable Logic Cells (CLC) for hardware customization. The XLP (eXtreme Low Power) designation places sleep current in the nanoampere range, making the part attractive for battery-operated sensor nodes. The architecture uses a Harvard-style bus with separate program and data paths, a 16-level hardware stack, and direct LED drive capability on selected pins. The device operates from 2.5V to 5.5V across the industrial thermal range, and integrates common sensor and actuator interfaces without external glue logic. Typical applications include small brushed-DC and stepper motor control, ceiling-fan and HVAC line-voltage control, LED lighting drivers, sensor signal conditioning, and general-purpose embedded control. Compared with discrete logic designs, the PIC16F1614 reduces BOM count and PCB area by integrating ADC, PWM, and commutation timers on one die. When designing with this MCU, place a 100 nF decoupling capacitor close to VDD with a bulk capacitor nearby, and keep the ICSP/PGD-PGC pins accessible for in-circuit programming. Program CONFIG words to match the chosen oscillator, watchdog timer, and code-protect settings before first use. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet.

RFQ İletişim
PIC16F1614T-I/SL - 8-bit MCU, 7KB Flash, 32MHz | Microchip
PIC16F1614T-I/SL

PIC16F1614T-I/SL - 8-bit MCU, 7KB Flash, 32MHz | Microchip

The Microchip Technology PIC16F1614T-I/SL is an 8-bit PIC microcontroller from the PIC16F161X family with 7KB Flash program memory, 512 bytes RAM, and 32 MHz internal oscillator, housed in a 14-pin SOIC (SL) package. The device integrates a 10-bit ADC, Capture/Compare/PWM (CCP), 24-bit Signal Measurement Timer (SMT), Zero-Cross Detection (ZCD), and peripheral pin select (PPS) for flexible mixed-signal control in compact form factors. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and configurable peripherals. The PIC16F1614 uses Microchip's enhanced mid-range 8-bit core running up to 32 MHz (8 MIPS) with a single-cycle instruction pipeline and 14-bit instruction word. The -I suffix indicates the industrial temperature range of -40C to +85C, while T denotes tape-and-reel packaging, and SL identifies the 14-pin SOIC outline. Key features include 10-bit A/D with computation, 5-bit DAC, 8-bit/16-bit timers, angular timer (24-bit SMT), complementary waveform generator, hardware limit timer, configurable logic cell (CLC), math accelerator, and an HF 32 MHz internal oscillator with +/- 2% accuracy. The XLP (eXtreme Low Power) variant retains active-mode current under 100 uA/MHz and sleep currents in the nA range, enabling battery-friendly duty-cycled designs. The PIC16F161X architecture delivers CIP (Core Independent Peripherals) such as CLC and SMT that offload state-machine and timing tasks from the CPU, allowing closed-loop fan control, lighting fade, and small-motor trapezoidal commutation without firmware overhead. With 7KB Flash (4K x 14 words) and 512 bytes RAM, the device targets cost-sensitive 8-bit applications that still need modern analog integration. Typical applications include small DC and stepper motor control loops, fan and pump RPM regulation, LED lighting controllers with dimming, household appliances, and general-purpose mixed-signal embedded control. The 14-pin SOIC footprint also simplifies migration from older PIC16F1xxx designs. Industrial-grade temperature and on-chip CIP make this MCU a strong fit for appliance and IoT edge nodes. Design tip: ensure the MCLR pin has the recommended 10 kohm pull-up and a 0.1 uF bypass capacitor on VDD within 5 mm of the pin. The ZCD and CCP peripherals are configured independently via PPS, so pin mapping must be finalized before firmware lock-in. This page synthesizes distributor pricing, drop-in alternative MPNs from the same Microchip PIC16F161X family, and practical design notes not aggregated in the manufacturer datasheet, helping procurement and embedded engineers evaluate the PIC16F1614T-I/SL against competing 14-pin 8-bit MCU options.

RFQ İletişim
PIC16F1615-E/ML - 8-bit MCU, 14KB Flash, 32MHz, QFN-16 | Microchip
PIC16F1615-E/ML

PIC16F1615-E/ML - 8-bit MCU, 14KB Flash, 32MHz, QFN-16 | Microchip

The Microchip Technology PIC16F1615-E/ML is an 8-bit PIC microcontroller featuring 14KB Flash program memory, 1KB RAM, and a 32MHz internal oscillator, housed in a 16-pin QFN (ML) package with extended -40C to +125C operating temperature range. The device integrates a 10-bit ADC, Capture/Compare/PWM (CCP), 24-bit Signal Measurement Timer (SMT), Zero-Cross Detection, and Complementary Waveform Generator (CWG), making it well-suited for closed-loop control of small motors, lighting, and general-purpose embedded applications. An 8-bit microcontroller (MCU) is a compact processor core that integrates CPU, RAM, program memory, and peripherals on a single die. Within the system hierarchy, an MCU sits below microprocessors (MPUs) but above discrete logic, providing programmable I/O, timing, and analog functions for embedded control. The PIC16F1615 belongs to Microchip's PIC16F1xxx enhanced mid-range family, which balances code density, peripheral richness, and ultra-low-power (XLP) operation for cost-sensitive industrial and consumer designs. Key features include 14KB self-programmable Flash, 1KB SRAM, 256B EEPROM, 10-bit ADC with computation (ADC2), 8-bit DAC, configurable logic cells (CLC), and Peripheral Pin Select (PPS). The integrated 32MHz high-speed oscillator eliminates external crystals in many designs. Built-in Core Independent Peripherals (CIPs) such as the CWG and SMT allow complex waveforms and precise time measurements without CPU intervention, reducing firmware complexity and power consumption. The PIC16F1615-E/ML uses a 14-bit instruction set with 8-bit data path and a modified Harvard architecture. Its nanoWatt XLP technology enables active currents under 50 uA/MHz and sleep currents in the nanoamp range, enabling battery-powered and energy-harvesting designs. The device supports in-circuit serial programming (ICSP) and in-circuit debugging (ICD) through dedicated pins, allowing rapid firmware iteration. Typical applications include small BLDC or brushed-DC motor control, LED lighting drivers, switched-mode power supply (SMPS) control, sensor signal conditioning, fan control, and home appliance user interfaces. Its combination of integrated analog, logic, and timer peripherals makes it well matched to applications that previously required multiple discrete ICs. When designing with the PIC16F1615-E/ML, ensure that VDD decoupling follows Microchip's recommended layout guidelines: a 0.1 uF ceramic capacitor placed within 4mm of each VDD/AVDD pin, plus a bulk 10 uF capacitor on the main supply rail. PPS configuration should be assigned before enabling peripherals to avoid spurious output transitions on power-up. This page synthesizes verified distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet front page.

RFQ İletişim
PIC16F1615-E/P - 8-Bit 32MHz 14KB Flash MCU | Microchip 14-PDIP
PIC16F1615-E/P

PIC16F1615-E/P - 8-Bit 32MHz 14KB Flash MCU | Microchip 14-PDIP

The Microchip Technology PIC16F1615-E/P is an 8-bit microcontroller from the PIC® XLP™ 16F family with on-chip Functional Safety (FuSa) features, delivering 32 MHz CPU performance with 14 KB (8K x 14) of FLASH program memory in a 14-pin PDIP package. Key highlights include 1 KB of RAM, a 10-bit A/D converter, configurable logic cells (CLC), CCP, 24-bit SMT timer, and Zero-Cross Detect (ZCD) peripherals tailored for embedded control of small motors and general-purpose applications. The 'E' suffix denotes the extended industrial temperature grade of -40C to +125C, and the 'P' suffix designates the through-hole 14-pin PDIP package. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (FLASH), working memory (RAM), and a rich set of programmable peripherals. The PIC16F1615 belongs to the 8-bit PIC mid-range architecture, which occupies the entry-level node in the Microchip controller hierarchy: 8-bit PIC -> PIC16 family -> PIC16F1xxx enhanced mid-range -> PIC16F161x sub-family with XLP and FuSa features. Its eXtreme Low Power (XLP) technology enables nanoWatt sleep currents suitable for battery-powered IoT nodes, and the FuSa subsystem provides hardware diagnostics for IEC 60730 Class B safety compliance. Differentiating features include 10-bit ADC with computation, complementary waveform generator (CWG), four 16-bit timers, two CCP modules, two UART, one I2C/SPI, and 12 I/O pins with interrupt-on-change. The wide operating voltage of 1.8 V to 5.5 V supports both 3.3 V and 5 V rails common in industrial sensor interfaces. Internal 32 MHz oscillator eliminates external crystals in cost-sensitive designs, while the 14-pin PDIP format simplifies through-hole prototyping on breadboards and perfboards. Functional safety features include windowed WDT, oscillator fail-safe, and CRC memory verification, making it attractive for white-good and appliance control. Typical applications include small BLDC/PMSM motor control loops, sensor signal conditioning, LED lighting controllers, battery-powered IoT endpoints, and safety-critical white goods such as washing machines and dishwashers. The combination of 14 KB FLASH and 1 KB RAM is well suited to mid-complexity state-machine firmware with light protocol stacks. The CWG and CCP peripherals support half-bridge and full-bridge drive timing for low-voltage brushed or stepper motors below 1 A. When designing with this device, allocate at least two I/O pins for ICSP programming (PGD/PGC), and reserve one I/O for the MCLR reset. The internal oscillator trim should be calibrated at production for UART timing accuracy. Decouple VDD with a 100 nF ceramic placed within 5 mm of the pin, and route analog VDD+ AVSS paths with a ferrite bead if ADC accuracy below 1 LSB is required. This page synthesizes distributor pricing, drop-in PIC16F161x family alternatives, application guidance, and PCB design notes not consolidated on the manufacturer product page.

RFQ İletişim