Mikrodenetleyiciler

Ürünler (20.000+)

PIC16F877T-20/L - 8-bit 20MHz 14KB Flash MCU 44-PLCC | Microchip
PIC16F877T-20/L

PIC16F877T-20/L - 8-bit 20MHz 14KB Flash MCU 44-PLCC | Microchip

The Microchip PIC16F877T-20/L is an 8-bit RISC microcontroller featuring the PIC16 CPU core with 14KB (8K x 14 words) of FLASH program memory, 368 bytes of data RAM, and 256 bytes of data EEPROM, packaged in a 44-pin PLCC (16.59x16.59 mm) and supplied on tape-and-reel. It executes 35 single-word instructions in as little as 200 nanoseconds at 20MHz, providing Microchip's classic mid-range PIC architecture with industry-standard peripheral integration. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (FLASH for program, SRAM for data, EEPROM for non-volatile storage), and peripherals (timers, ADC, communications, I/O) onto one silicon die. Within the broader taxonomy, the PIC16F877 belongs to the 8-bit microcontroller class, which sits inside the microcontroller family, which in turn is a subset of embedded computing semiconductors. The 8-bit class remains widely deployed where deterministic instruction timing, low cost, and simple toolchain (assembly or C with the MPLAB XC8 compiler) outweigh raw throughput. Key specifications: 20MHz maximum clock, 5V typical operating voltage (range typically 2.0V-5.5V), 33 digital I/O pins, 8-channel 10-bit ADC, USART, MSSP (SPI/I2C), two CCP modules, and a watchdog timer. The 14KB FLASH holds roughly 8K instructions, generous for state machines, sensor aggregation, and human-machine-interface (HMI) controllers. The architecture is built on Harvard memory organization with separate program and data buses, an instruction pipeline, and a 14-bit program word. Brown-out Reset (BOR), Power-on Reset (POR), and the watchdog timer combine to deliver robust in-field recovery without external supervisors. The MSSP peripheral supports both SPI master/slave and I2C master/slave, simplifying bus integration with EEPROMs, sensors, and displays. Typical applications include industrial sensor interfaces, HVAC controllers, automotive body electronics (where the I-grade variant applies), consumer appliance controls, low-cost data acquisition, and educational/hobbyist development. The 8-channel ADC and 33 I/O make it a natural fit for instrumentation front-ends with keypad/LCD user interfaces. A core design consideration is selecting the oscillator mode: crystal/ceramic resonator for timing-critical designs or internal RC mode to save board space. In-system programming (ICSP) via RB6/RB7 pins allows firmware updates without removing the device, but those pins must not be repurposed as outputs during programming. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes derived from cross-reference tooling not consolidated in any single source.

RFQ İletişim
PIC16F877T-20/PQ - 8-bit MCU 14KB Flash 20MHz 44-MQFP | Microchip
PIC16F877T-20/PQ

PIC16F877T-20/PQ - 8-bit MCU 14KB Flash 20MHz 44-MQFP | Microchip

The Microchip Technology PIC16F877T-20/PQ is a CMOS FLASH-based 8-bit microcontroller from the PIC® 16F family, providing 14KB (8K x 14) of on-chip FLASH program memory, 368 bytes of data RAM, and 256 bytes of EEPROM, housed in a 44-pin MQFP (PQ) package rated for 20MHz operation. The PIC16F877T-20/PQ operates from 4.0V to 5.5V and executes instructions in a 200ns single-cycle pipeline, supporting 33 digital I/O pins, an integrated 10-bit ADC, two USART modules, MSSP (SPI/I2C), two 8-bit and one 16-bit timer, and a parallel slave port. An 8-bit microcontroller (MCU) is a single-chip processor that integrates a CPU, memory, and peripherals on one piece of silicon. PIC microcontrollers use a RISC architecture with only 35 single-word instructions, balancing code efficiency with deterministic timing. Within the broader MCU taxonomy, 8-bit PIC MCUs sit beneath 16-bit PIC24/dsPIC and 32-bit PIC32 families, and are part of the wider embedded microcontroller category that includes AVR, 8051, MSP430, and Cortex-M0 devices. The PIC16F877 family targets peripheral-rich industrial and consumer applications where deterministic I/O handling and low cost matter more than raw CPU throughput. Key features of the PIC16F877T-20/PQ include in-circuit serial programming (ICSP) via two pins, a watchdog timer with on-chip RC oscillator, power-on reset, brown-out detection, and a code-protection bit pattern to lock FLASH contents. Compared with newer PIC16F877A silicon, the original PIC16F877 lacks the extended instruction set and improved ADC performance; Microchip officially recommends migrating to the PIC16F887 for new designs. The RISC-style architecture, 14-bit wide instruction word, and Harvard bus structure allow deterministic, mostly single-cycle execution. With 20MHz oscillator input, the instruction cycle is 200ns, providing 5 MIPS peak throughput - sufficient for control loops, sensor polling, and slow serial communication. The 256-byte EEPROM supports 1M erase/write cycles, and FLASH endures 100K write cycles per cell, making the device suitable for parameter storage and field updates via bootloader or ICSP. Typical applications include industrial control panels, HVAC fan controllers, instrumentation front-ends, security alarm panels, and legacy serial-bus sensor nodes where the 44-MQFP footprint is retained for retrofit boards. Designers also use it for educational platforms and rapid prototyping given the long-standing availability of compilers, debuggers, and reference designs. When designing with the PIC16F877T-20/PQ, ensure the 5V rail is regulated and decoupling is placed at every VDD pin pair. Note that Microchip has migrated most PIC16F877 family devices to the PIC16F877A-A version for new designs; confirm the errata list before finalizing firmware because older silicon may exhibit ADC and LVD behavior differences. This page combines manufacturer datasheet figures, distributor pricing tiers, and parametric drop-in alternatives curated for the PIC16F877 family, providing a single reference for sourcing and BOM decisions.

RFQ İletişim
PIC16F877T-20/PT - 8-bit 20MHz MCU, 14KB Flash, TQFP-44 | Microchip
PIC16F877T-20/PT

PIC16F877T-20/PT - 8-bit 20MHz MCU, 14KB Flash, TQFP-44 | Microchip

The Microchip Technology PIC16F877T-20/PT is an 8-bit PIC® RISC microcontroller with 14KB Flash program memory, 368 bytes of RAM, and 256 bytes of EEPROM, housed in a 44-pin TQFP package and operating at up to 20MHz clock speed. Built around Microchip's mid-range PIC16 architecture, it delivers 200 ns instruction execution with only 35 single-word instructions, making firmware development fast and code density high. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and peripherals such as timers, ADCs, and communication ports onto one die. Within the embedded hierarchy, an MCU sits below microprocessors (MPUs) in complexity but above discrete logic in capability. The PIC® 16F family uses a Harvard RISC core that fetches instructions and data on separate buses, allowing most instructions to complete in one instruction cycle - the foundation of its compact, deterministic performance. Key features of the PIC16F877T-20/PT include 33 digital I/O pins, a 10-bit ADC with up to 8 channels, two 8-bit and one 16-bit timers, and three serial communication modules (USART, MSSP/SPI/I2C). The 'T' suffix indicates tape-and-reel packaging for high-volume assembly, while the '20' speed grade specifies a 20MHz maximum oscillator frequency. Internal brown-out reset, watchdog timer, and in-circuit serial programming (ICSP) are built in. This combination of analog-rich peripherals, ample program memory, and a compact TQFP-44 footprint makes the PIC16F877T-20/PT a workhorse for industrial control, sensor conditioning, motor control, and human-machine interface designs. It remains widely deployed in mature products where firmware portability and long-term Microchip supply guarantees are priorities. Typical applications span factory automation boards, HVAC controllers, security panels, instrumentation, and consumer appliance mainboards. Designers value the PIC16F877's deterministic interrupt latency and the mature MPLAB XC8 toolchain for rapid prototyping and long-term maintenance. When designing with this MCU, ensure your 5V supply rail stays within the 2.0-5.5V VDD range, and budget for the in-circuit programming header on production boards for firmware updates. Decouple VDD with 100nF + 10uF bulk caps close to the pins. This page synthesizes distributor pricing, drop-in same-brand and cross-brand alternatives, and practical PCB design notes that complement the manufacturer datasheet with information-gain content not found on distributor product pages.

RFQ İletişim
PIC16F877T-20I/L - 8-Bit 20MHz 14KB Flash MCU | Microchip
PIC16F877T-20I/L

PIC16F877T-20I/L - 8-Bit 20MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16F877T-20I/L is an 8-bit RISC Flash microcontroller based on the PIC16 architecture, operating at up to 20 MHz with 14 KB (8K x 14 words) of on-chip program Flash memory and 368 bytes of RAM, housed in a 44-pin PLCC (J-lead, 16.59 x 16.59 mm) package with industrial-grade -40C to +85C temperature rating. What is a PIC16F microcontroller? The PIC16F family is a category of 8-bit Harvard-architecture RISC microcontrollers from Microchip Technology, belonging to the broader class of microcontrollers (MCU) within embedded systems semiconductors. These devices integrate CPU core, Flash program memory, RAM, EEPROM, and peripherals (ADC, USART, I2C/SPI, timers, PWM, capture/compare) on a single die, executing one instruction per 200 ns cycle at 20 MHz. They sit in the system hierarchy above discrete logic and below 32-bit Cortex-M MCUs, optimized for cost-sensitive deterministic control. The PIC16F877T-20I/L delivers 33 digital I/O lines, a 10-bit 8-channel ADC, two 8-bit and one 16-bit timer, MSSP (SPI/I2C), USART, and 256 bytes of EEPROM data memory. The "T" suffix denotes tape-and-reel packaging and the "I" indicates the industrial temperature grade; the "20" specifies the 20 MHz maximum clock. Architecturally the device uses a 14-bit instruction word, 8-bit data path, separate program and data buses (Harvard), and a hardware stack with 8 levels. The Flash memory supports 100,000 erase/write cycles typical and 40-year data retention per the Microchip datasheet family, while in-circuit serial programming (ICSP) allows field updates via two pins. Typical applications include industrial process control, HVAC and building automation, automotive body electronics (non-safety), instrumentation front-ends, and legacy embedded product replacements. The wide peripheral set also suits sensor hub nodes, motor control loops, and human-machine interface (HMI) controllers using character LCDs. A key design consideration is the obsolete status note from Microchip (recommends PIC16F887 for new designs), but the 44-pin PLCC remains drop-in compatible with the successor family for many footprints. Designers should verify the ICD/debug header compatibility and use MPLAB X IDE with a PICkit or ICD programmer during development. This page synthesizes distributor pricing, drop-in 44-PLCC alternatives, datasheet pinout, and practical design notes that go beyond the manufacturer datasheet alone.

RFQ İletişim
PIC16F877T-20I/PQ - 20MHz 8-Bit MCU | Microchip
PIC16F877T-20I/PQ

PIC16F877T-20I/PQ - 20MHz 8-Bit MCU | Microchip

The Microchip Technology PIC16F877T-20I/PQ is an 8-bit CMOS flash microcontroller with 14KB of program Flash, 368 bytes of RAM, 33 I/O pins, and a 20MHz maximum clock speed, housed in a 44-pin MQFP package. It combines the PIC16 RISC instruction set with integrated peripherals for embedded control and supports operation from -40°C to +85°C in the industrial-grade ordering code. An 8-bit microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, I/O ports, timers, and communication peripherals on one device. The PIC16F877 family belongs to the mid-range PIC16 product hierarchy, where the flash-based architecture supports in-circuit reprogramming and a compact instruction set suited to industrial controllers, instruments, appliances, and legacy embedded platforms. Key features include 14KB Flash memory, 368 bytes of RAM, 33 digital I/O lines, and a 20MHz operating speed. According to the Microchip PIC16F877 product-page snippet, the device provides 200ns instruction execution and uses only 35 single-word instructions. These characteristics make the PIC16F877T-20I/PQ appropriate for designs requiring deterministic control, compact firmware, and a broad collection of on-chip peripherals. The PIC16 architecture uses separate program and data memory spaces and is upward compatible with earlier PIC16C5X, PIC12CXXX, and PIC16C7X devices, as stated on the Microchip product page. Its 44-pin MQFP provides a higher I/O count than 40-pin DIP variants, while the 20MHz speed rating supports more demanding timer, serial-interface, and control-loop workloads than 4MHz implementations. Typical applications include industrial monitoring equipment, temperature controllers, motor and relay controllers, data-acquisition front ends, instrumentation, and general-purpose embedded control. The same 44-pin package is also used by newer PIC16F887 devices, which Microchip identifies as a newer device for the PIC16F877 family and which are discussed as having the same pinout in replacement guidance. Designers should verify the exact pin assignment, oscillator configuration, programming interface, and peripheral availability against the manufacturer datasheet before a hardware revision. The -40°C to +85°C industrial temperature range supports deployed equipment, but electromagnetic robustness, watchdog strategy, brownout behavior, and communication timing must still be validated for the end application. This product page combines the verified device specifications, lifecycle information, observed distributor pricing, pin-compatible replacement candidates, and application guidance to provide practical information beyond a basic manufacturer ordering-table entry. Alternative listings remain subject to firmware, peripheral, and qualification review.

RFQ İletişim
PIC16F877T-20I/PT - 20MHz 8-Bit MCU | Microchip Technology
PIC16F877T-20I/PT

PIC16F877T-20I/PT - 20MHz 8-Bit MCU | Microchip Technology

The Microchip Technology PIC16F877T-20I/PT is an 8-bit CMOS Flash-based PIC microcontroller operating at up to 20 MHz, with 14 KB (8K x 14 words) of program Flash, 368 bytes of RAM, and 33 I/O pins, housed in a 44-pin TQFP (10 x 10 mm) package. It combines a RISC-based PIC architecture, 200 ns instruction execution, and a 35-instruction instruction set in a compact surface-mount microcontroller. An 8-bit microcontroller is a programmable semiconductor integrated circuit that executes embedded-control instructions using an 8-bit data path. Within the product hierarchy, the PIC16F877 belongs to Microchip’s mid-range PIC16 family, combining general-purpose digital control, Flash program memory, data RAM, and dedicated communication peripherals in one device. The PIC16F877T-20I/PT is therefore more capable than simple 8-bit logic controllers while remaining simpler than many 16- and 32-bit processors. Key features include 14 KB of Flash program memory, 368 bytes of RAM, 33 I/O pins, and a maximum clock frequency of 20 MHz. Its industrial-temperature designation identifies it for extended-temperature equipment, while the -20 suffix specifies the 20 MHz performance grade. According to the manufacturer product page, the core uses a powerful RISC-based PIC architecture with 35 single-word instructions and 200 ns instruction execution, supporting efficient control loops, timing, and serial-interface handling. The integrated feature set supports embedded designs that require multiple I/O lines, asynchronous and synchronous serial communication, timers, interrupts, and programmable digital interfaces. A 44-pin TQFP provides substantially more I/O connectivity than smaller 28-pin and 40-pin microcontroller packages, making the device suitable for controller boards where external logic, sensors, relays, communication transceivers, and human-interface circuitry must connect to one controller. Typical applications include industrial monitoring and control, communication equipment, data acquisition, motor and relay control, instrumentation, and embedded products requiring an extended-temperature 8-bit MCU. The 20 MHz operating speed provides additional timing margin for interrupt-driven control, while 33 I/O pins reduce the need for external I/O expanders. The 14 KB Flash area also allows meaningful embedded code, bootloader logic, and configuration storage within a single device. Designers should verify the exact peripheral mapping, electrical limits, programming requirements, and timing constraints against the manufacturer datasheet before layout release. A 44-pin TQFP footprint requires adequate copper area and careful fan-out for signal integrity and assembly. The industrial grade should be confirmed for every unverified operating-temperature requirement, and firmware should be validated for all interrupt priorities, peripheral interactions, and communication rates. This product data consolidates the verified manufacturer and distributor information, distinguishes package and temperature variants, and identifies where drop-in alternatives require careful compatibility review. It also adds practical comparison and selection guidance that is not normally presented together on a distributor listing, helping engineers assess procurement, PCB reuse, and firmware compatibility more efficiently.

RFQ İletişim
PIC16F87T-E/ML - 8-bit PIC MCU 20MHz 7KB Flash | Microchip
PIC16F87T-E/ML

PIC16F87T-E/ML - 8-bit PIC MCU 20MHz 7KB Flash | Microchip

The Microchip Technology PIC16F87T-E/ML is an 8-bit PIC RISC flash microcontroller (MCU) operating at up to 20 MHz with 200 ns instruction execution, integrating 7 KB (4K x 14 words) of enhanced flash program memory and packaged in a 28-pin QFN with exposed thermal pad (6 x 6 mm) supplied on tape and reel. It is part of the PIC16F87/88 family of 18/20/28-pin Enhanced Flash Microcontrollers with NanoWatt Technology, the same die as the non-'T' PIC16F87-I/ML but specified for the extended -40C to +125C industrial temperature range and supplied in the small-outline QFN-28 footprint. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, RAM, EEPROM, timers, serial peripherals, and digital I/O on one die. The PIC architecture uses a RISC (Reduced Instruction Set Computer) Harvard-style design where program and data buses are separate, allowing simultaneous instruction fetch and data access. Within Microchip's portfolio, PIC16 sits between PIC10/12/14 (lower pin count) and PIC18 (higher performance, 16-bit wide instructions), targeting battery-powered and cost-sensitive embedded applications through low-power NanoWatt sleep modes. Key features include 35 single-word instructions that simplify coding, hardware USART, MSSP for SPI/I2C, capture/compare/PWM modules, 256 bytes of EEPROM, two 8-bit timers plus one 16-bit timer, a 10-bit multi-channel ADC, nano-power sleep current, and an internal oscillator option that eliminates the external crystal in many designs. The 28-QFN exposed pad lowers thermal resistance and enables compact board layouts for sensor hubs, white-goods controls, and handheld instruments. Typical applications include consumer white goods, low-end remote controls, sensor signal conditioning, battery-powered instrumentation, and small industrial control nodes where deterministic real-time response and low sleep current matter more than raw CPU throughput. When designing with this part, prioritize single-rail 5 V supplies with decoupling capacitors of at least 0.1uF adjacent to every VDD pin. For in-circuit serial programming (ICSP) leave the ICSP pins accessible; leaving MCLR unbonded is a common PCB layout mistake that blocks in-field firmware updates. This page consolidates distributor pricing, drop-in VQFN-28 alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim
PIC16F87T-E/SO - 8-bit MCU, 20MHz, 4KB Flash, 18-SOIC | Microchip
PIC16F87T-E/SO

PIC16F87T-E/SO - 8-bit MCU, 20MHz, 4KB Flash, 18-SOIC | Microchip

The Microchip Technology PIC16F87T-E/SO is an 8-bit CMOS Flash-based enhanced microcontroller from the PIC16F87 family, operating at up to 20 MHz with 200 ns instruction cycle time and 35 single-word instructions in a 18-pin SOIC wide-body package. It integrates 7 KB (4K x 14) of Flash program memory, 368 bytes of RAM, and 256 bytes of EEPROM data memory, providing ample space for embedded control code in compact, cost-sensitive designs. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, integrating CPU, memory (Flash/ROM, RAM, EEPROM), and peripherals into one IC. Within the broader semiconductor hierarchy, it belongs to the microcontroller -> embedded controller -> digital IC -> integrated circuit family. Microchip's PIC16 mid-range architecture is one of the industry-standard 8-bit RISC cores, designed for deterministic real-time control in consumer, industrial, and automotive applications. Key features include 16 digital I/O pins, an operating voltage range of 4.0 V to 5.5 V, on-chip peripherals such as a 10-bit ADC, two 8-bit timers, one 16-bit timer with capture/compare/PWM, enhanced PWM module, USART, I2C/SPI, and NanoWatt power management for low-power sleep modes. Brown-out Reset, Power-on Reset, and Watchdog Timer provide robust field reliability. The device uses Microchip's enhanced mid-range Harvard architecture with a 14-bit instruction word and 8-bit data path, executed through a pipelined RISC engine. The "T" suffix denotes Tape & Reel packaging for high-volume assembly; the "-E" denotes the Extended (industrial) temperature grade of -40 °C to +125 °C, while the "SO" suffix indicates the 18-pin SOIC 300-mil package. Typical applications include sensor signal conditioning, HVAC damper/valve control, small appliance motor control, battery chargers, security alarm panels, and industrial control modules. The combination of low power, deterministic interrupt latency, and ample analog/digital peripherals makes it well suited for replacing discrete logic in space-constrained designs. When designing with this MCU, ensure the ICSP clock/clock-out pins are reserved for in-circuit programming unless a separate programming header is provided, and place a 100 nF decoupling capacitor close to VDD with a bulk 10 µF on the board supply rail. This page synthesizes distributor pricing from Mouser and Octopart, drop-in same-package alternatives from the PIC16F87 family, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim
PIC16F87T-E/SS - 8-bit 20MHz 7KB Flash MCU | Microchip
PIC16F87T-E/SS

PIC16F87T-E/SS - 8-bit 20MHz 7KB Flash MCU | Microchip

The Microchip Technology PIC16F87T-E/SS is an 8-bit PIC16 microcontroller built on an enhanced RISC architecture, featuring a 20 MHz core clock with 200 ns instruction execution, 7 KB (4K x 14) of Flash program memory, 368 bytes of SRAM, and 256 bytes of EEPROM in a 20-pin SSOP package. Tape-and-reel ("T") and "E" denote the extended (-40C to +125C) industrial temperature range, allowing deployment in harsh environments. The device is built on Microchip's nanoWatt Technology platform for reduced active and sleep power consumption. A PIC microcontroller is a RISC-based 8-bit Harvard-architecture MCU that executes single-word instructions from on-chip Flash memory; the PIC16F family is the canonical mid-range family, bridging the PIC10/12/16 baseline series and the higher-pin PIC18 series. Within Microchip's taxonomy, the PIC16F87 sits at the intersection of nanoWatt low-power MCUs and the PIC16F87x mainstream Flash controllers, offering serial peripherals (I2C, SPI, UART/USART), PWM, and brown-out reset in a small 20-pin package. Key features of the PIC16F87T-E/SS include 16 I/O pins, 35 single-word instructions, an 8 MHz internal oscillator option, an in-circuit debug (ICD) interface, Power-on Reset (POR), Brown-out Detect/Reset, and a Watchdog Timer (WDT) with its own on-chip low-power oscillator. The device operates from 4 V to 5.5 V and supports two power-managed modes - Sleep and Idle - to minimize quiescent current in battery-powered designs. Peripherals include a 10-bit ADC on larger package variants and synchronous/asynchronous serial ports. The architecture is a Harvard-memory CMOS design with separate 14-bit instruction and 8-bit data buses, enabling one instruction per clock cycle at 20 MHz. The Flash memory is programmable via ICSP (In-Circuit Serial Programming), allowing firmware updates without removing the part from the board. This makes the PIC16F87T-E/SS well-suited to prototype-to-production migration on a single PCB layout. Typical applications include industrial sensor interfaces, motor-control PWM drivers, automotive body electronics, consumer white-goods controllers, low-power remote keyless entry (RKE), and general-purpose embedded control. The extended temperature range makes it suitable for under-hood and outdoor equipment. Designers often migrate to this MCU from older PIC16C7x and PIC16C62xA designs because the pinout and core registers are upwards-compatible. When designing with this device, ensure the ICSP pins (RB6/RB7) are not loaded with low-impedance circuits in production, since in-circuit programming requires signal integrity on these lines. Use the configuration bits to set oscillator source, watchdog enable, and code protection, and place a 100 nF decoupling capacitor within 5 mm of VDD. This page synthesizes Microchip datasheet specifications, distributor pricing tiers, drop-in alternatives and practical design notes curated by XAIPART editors.

RFQ İletişim
PIC16F87T-I/ML - 8-bit 20MHz 7KB Flash MCU 28-QFN | Microchip
PIC16F87T-I/ML

PIC16F87T-I/ML - 8-bit 20MHz 7KB Flash MCU 28-QFN | Microchip

The Microchip Technology PIC16F87T-I/ML is an 8-bit PIC® microcontroller (MCU) built on Microchip's enhanced mid-range core, featuring 20 MHz maximum clock speed (200 ns instruction cycle), 7 KB (4K x 14) of Flash program memory, 368 bytes of SRAM, and 256 bytes of EEPROM data memory, all housed in a compact 28-pin QFN (6x6 mm) package. The "T" suffix indicates a Tape & Reel packaging option, while the "I" denotes the industrial temperature grade (-40°C to +85°C). This CMOS Flash-based MCU delivers 16 digital I/O pins and integrates the nanoWatt Technology power management feature set, making it suitable for both battery-powered and line-powered embedded designs. What is an 8-bit microcontroller? An 8-bit microcontroller (MCU) is a single-chip computer that processes data 8 bits at a time and integrates a CPU, memory (Flash/ROM for program code, RAM for data, sometimes EEPROM), and peripherals (timers, communication modules, ADC) on one die. The PIC16F87 family sits in Microchip's mid-range PIC® hierarchy: PIC10/12/16/18 family -> PIC16 mid-range -> PIC16F87x enhanced Flash series -> PIC16F87T tape-and-reel sub-line. The QFN-28 (6x6) package places this device in the same footprint family as Microchip's other 28-pin enhanced PICs, enabling layout reuse across the series. Key features include a 14-bit instruction word with only 35 single-word instructions, on-chip brown-out detect/reset (BOR), power-on reset (POR), watchdog timer (WDT), pulse-width modulation (PWM) peripherals, and three serial communication interfaces: I²C, SPI, and USART. The device supports in-circuit serial programming (ICSP) via two pins, allowing firmware updates after PCB assembly without removing the chip. Technical depth: The PIC16F87 architecture uses a Harvard-style memory organization with separate program and data buses, a 15-bit program counter capable of addressing 32K x 14 words, and a 13-bit stack for subroutine nesting. The nanoWatt Technology feature set includes multiple power-managed operating modes (run, idle, sleep) with wake-up on interrupt, an internal oscillator option, and ultra-low power consumption in sleep mode. The device operates across 2.0V to 5.5V VDD, supporting both 3.3V and 5V system designs. Typical applications include industrial control and sensor interfacing, low-power remote sensor nodes, consumer appliance controllers, automotive body electronics subsystems (non-safety), and legacy embedded system upgrades where a proven 8-bit core replaces older PIC16C7x designs. Its broad peripheral set also makes it a fit for simple human-machine interface (HMI) panels with PWM-driven LED or buzzer outputs. Design consideration: When migrating from the older PIC16F87 to the PIC16F87T variant, verify the T suffix means tape-and-reel only (no silicon change) versus other temperature-grade suffixes. Ensure ICSP programming connector access is preserved on the PCB, since debug and firmware updates require PGx and PGx pins to be routed to a header. The 28-QFN has a thermal pad that must be soldered to the ground plane for proper thermal and electrical performance. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone. Engineers evaluating the PIC16F87T-I/ML for new designs or as a long-term replacement for PIC16C7x-era silicon will find drop-in QFN-28 alternatives, parametric comparisons, and a verified pricing snapshot here.

RFQ İletişim
PIC16F87T-I/SO - 8-Bit 20MHz 7KB Flash MCU 18-SOIC | Microchip
PIC16F87T-I/SO

PIC16F87T-I/SO - 8-Bit 20MHz 7KB Flash MCU 18-SOIC | Microchip

The Microchip Technology PIC16F87T-I/SO is an 8-bit Flash-based CMOS microcontroller from the PIC16F87/88 family, operating at up to 20 MHz with 200 ns instruction execution in an 18-pin SOIC (SO) wide-body package. It integrates 7 KB of Flash program memory (4K x 14 words), 368 bytes of RAM, and 256 bytes of EEPROM data memory, with 16 digital I/O pins and nanoWatt Technology power management. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory, working RAM, and configurable peripherals. The PIC16F87T belongs to Microchip's mid-range PIC16 family, sitting in the taxonomy PIC16F87 -> PIC16F8x -> PIC16 mid-range 8-bit MCU -> 8-bit microcontroller -> embedded processor. Its RISC architecture executes 35 single-word instructions, and it is source-code compatible with PIC16C7x, PIC16C62xA, PIC16C5X and PIC12Cxxx devices, easing legacy migration. Key features include 8-bit core width, 20 MHz maximum clock, 200 ns instruction cycle, 16 I/O, 10-bit ADC with up to 8 channels, Capture/Compare/PWM modules, USART, MSSP (I²C/SPI), brown-out detect, power-on reset, watchdog timer, ICD in-circuit debugging, and nanoWatt sleep modes drawing microamp-level currents. The wide 4 V to 5.5 V Vcc range targets industrial 5 V systems. Typical applications include industrial control, sensor interfacing, low-power remote sensor nodes, consumer appliance control, and battery-backed instrumentation. The 18-SOIC package provides a wide 0.295 inch / 7.50 mm body suitable for hand-soldered prototypes and through-hole-compatible socket adapters, while the -I temperature grade covers -40 °C to +85 °C. When designing with this MCU, place a 100 nF decoupling capacitor within 5 mm of VDD and reserve MCLR as a reset input per datasheet recommendations. The T-suffix tape-and-reel variant is supplied in 18-SOIC wide-body packages identical in pinout to the 18-pin PDIP, allowing PCB layout reuse. This page synthesizes distributor pricing, drop-in same-package alternatives drawn from the same PIC16F87/88 family, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim
PIC16F87T-I/SS - 8-bit 20MHz 7KB Flash MCU 20-SSOP | Microchip
PIC16F87T-I/SS

PIC16F87T-I/SS - 8-bit 20MHz 7KB Flash MCU 20-SSOP | Microchip

The Microchip Technology PIC16F87T-I/SS is an 8-bit PIC RISC microcontroller with 7KB (4K x 14) FLASH program memory and 368 bytes of RAM, housed in a 20-pin SSOP package. Operating at up to 20MHz (200 ns instruction cycle) from a 4V to 5.5V supply, it executes 35 single-word instructions across a PIC16-enhanced core architecture with nanoWatt Technology for low-power operation. Sixteen I/O pins are supported together with on-chip peripherals including Brown-out Detect/Reset, Power-on Reset, PWM, and a Watchdog Timer. A microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, program memory (FLASH or ROM), and peripherals such as timers, communication interfaces and ADCs. The PIC16F87 family sits in the mid-range PIC16 hierarchy: PIC16 -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. Within Microchip's portfolio, the PIC16F87/88 series targets cost-sensitive embedded control where deterministic interrupt response and small footprint matter more than raw compute throughput. Key features include 256 bytes of data EEPROM, I²C/SPI/UART-USART connectivity, in-circuit serial programming (ICSP), and nanoWatt power-saving modes that drop supply current into the microamp range during idle. Five A/D channels (10-bit) provide analogue sensing, while two 8-bit timers and one 16-bit timer cover most PWM and event-capture duties. The 20-pin SSOP (5.30 mm body) gives a low-profile solution for space-constrained boards. The PIC16F87T-I/SS uses a Harvard RISC core with separate program and data buses, allowing the next instruction to be fetched during execution of the current one. The 'T' suffix denotes tape-and-reel packaging, and the 'I' denotes the industrial temperature range (-40°C to +85°C). Typical applications include consumer appliances, sensor interfaces, low-power battery devices, industrial control modules, and automotive body subsystems (non-safety). Its compact SSOP footprint also makes it a common choice for retrofits in legacy designs originally built around the PIC16F87. Designers should ensure ICSP clock and data lines have proper isolation resistors to avoid in-circuit programming disturbing the application circuit. The 20-MHz maximum operating frequency assumes a 4.0–5.5 V supply; at lower voltages the internal oscillator divider or reduced Fosc mode must be used. This page synthesizes distributor pricing, drop-in Microchip alternatives in the same SSOP-20 footprint, and practical design notes not found in the manufacturer datasheet alone.

RFQ İletişim
PIC16F88-E/ML - 8-bit MCU, 7KB Flash, 28-QFN | Microchip
PIC16F88-E/ML

PIC16F88-E/ML - 8-bit MCU, 7KB Flash, 28-QFN | Microchip

The Microchip Technology PIC16F88-E/ML is an 8-bit CMOS Flash-based PIC16 microcontroller featuring 7KB of Flash program memory, 368 bytes of RAM, and 256 bytes of EEPROM, housed in a 28-pin VQFN (QFN-EP) package with exposed pad for thermal dissipation. It executes instructions at 200 ns per cycle (20 MHz oscillator) and operates from 2.0V to 5.5V across an industrial temperature range of -40C to +125C. An 8-bit microcontroller (MCU) is a small, low-power computer-on-a-chip built around an 8-bit data path. The PIC16F88 belongs to the mid-range PIC16 family of microcontrollers from Microchip, which sits within the broader power-management and embedded-control hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. The PIC16F88-E/ML is the "E" (extended temperature, -40C to +125C) speed grade, packaged in the surface-mount 28-QFN variant. Key features include an internal 8 MHz oscillator, 16 I/O pins, one Capture/Compare/PWM (CCP) module, an Addressable USART, a Master Synchronous Serial Port configurable as SPI or I2C, a 10-bit Analog-to-Digital Converter with 7 channels, and nanoWatt technology for ultra-low power consumption. The device supports in-circuit serial programming (ICSP) via two pins, allowing firmware updates after PCB assembly. The PIC16F88 uses a Harvard RISC architecture with only 35 single-word instructions, providing deterministic interrupt response and code efficiency. The integrated EEPROM supports >1M erase/write cycles, while Flash endurance is rated at 100K cycles minimum. The exposed thermal pad on the QFN package lowers junction-to-ambient thermal resistance for improved reliability in space-constrained industrial designs. Typical applications include sensor interface modules, industrial control subsystems, low-power remote sensor nodes, automotive body electronics (non-safety), HVAC controllers, and consumer white-goods user interfaces. The integrated ADC and USART simplify designs that require analog monitoring and serial communication to a host processor. When designing with the PIC16F88-E/ML, note that the exposed pad (pin 29) must be soldered to the PCB ground plane for both thermal and electrical performance. The internal oscillator accuracy is typically +/-1% over voltage and temperature after calibration, but for timing-critical protocols such as RS-485 or LIN, an external crystal is recommended for tighter tolerance. This page synthesizes distributor pricing, drop-in alternatives from the PIC16F family and PIC18F migration path, and practical design notes that complement the manufacturer datasheet for engineers evaluating PIC16F88-E/ML.

RFQ İletişim
PIC16F88-E/P - 8-bit MCU, 7KB Flash, 20MHz, 18-PDIP | Microchip
PIC16F88-E/P

PIC16F88-E/P - 8-bit MCU, 7KB Flash, 20MHz, 18-PDIP | Microchip

The Microchip Technology PIC16F88-E/P is an 8-bit CMOS Flash-based mid-range microcontroller IC delivering up to 20MHz instruction execution (200 ns per instruction cycle) with 7KB (4K x 14) of Flash program memory, packed into an 18-pin PDIP through-hole package. It belongs to Microchip's PIC16F87/88 family and offers 368 bytes of SRAM plus 256 bytes of EEPROM data memory. A microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, and a rich set of peripherals. The PIC16F88 sits in the PIC® mid-range 8-bit family — microcontrollers > 8-bit microcontrollers > PIC® mid-range — and historically targets applications that need serial comms, ADC, and PWM in a small footprint. Key features include an internal 8 MHz oscillator (calibrated to ±1% per Microchip datasheet 30487D), seven 10-bit Analog-to-Digital (A/D) converter channels, an Addressable USART for asynchronous serial, a master Synchronous Serial Port (MSSP) configurable as either 3-wire SPI™ or 2-wire I²C™, a Capture/Compare/PWM (CCP) module, a programmable Brown-out Reset (BOR), and an ICD (In-Circuit Debug) interface on pins RB6/RB7. Sixteen I/O pins are available with 25 mA source/sink capability per pin, making it suitable for direct driving of small relays and LEDs. Architecturally, the device uses a 14-bit instruction word, 35 single-word instruction set, and an 8-level deep hardware stack for subroutines. The internal oscillator can be software-selected between 31 kHz and 8 MHz, allowing designers to trade off speed against power consumption without an external crystal. Typical applications include consumer remote controls, sensor signal conditioning, low-end motor control, RS-232 / RS-485 protocol bridges, hobbyist and educational platforms (replacing the legacy PIC16F84), and small-scale industrial sensor interfaces. The 18-pin PDIP package is specifically chosen for through-hole prototyping, breadboarding, and legacy PCB compatibility. When designing with this part, populate CONFIG words to enable the internal oscillator and disable unused peripherals via firmware, since the MCU consumes active current proportional to oscillator speed. A 0.1 µF decoupling cap between VDD/VSS placed within 5 mm of the pins is mandatory; an internal POR (Power-On Reset) holds the part in reset until VDD reaches a stable threshold. This page synthesizes distributor pricing, pin-compatible alternatives, and practical design notes for the PIC16F88-E/P that complement the official Microchip datasheet 30487D.

RFQ İletişim
PIC16F88-E/SO - 8-bit 20MHz MCU 7KB Flash 18-SOIC | Microchip
PIC16F88-E/SO

PIC16F88-E/SO - 8-bit 20MHz MCU 7KB Flash 18-SOIC | Microchip

The Microchip Technology PIC16F88-E/SO is an 8-bit CMOS Flash-based microcontroller in the PIC16F family, featuring 7KB (4K x 14) of program memory, 368 bytes of SRAM, 256 bytes of EEPROM, and 16 digital I/O pins, packaged in a 18-pin SOIC (SO) with 0.295-inch (7.50 mm) body width. The -E temperature grade suffix designates an extended industrial operating range of -40C to +125C, distinguishing it from the standard -I (industrial) and -F (extended) siblings of the same die. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and configurable peripherals. Within the Microchip portfolio, PIC microcontrollers form a 35-instruction RISC architecture family upward-compatible with the legacy PIC16C7x, PIC16C62xA, PIC16C5X, and PIC12Cxxx devices, and sit at the bottom of the modern 8-bit PIC16F/18F hierarchy before scaling into 16-bit dsPIC and 32-bit PIC32 families. Key features include a 20 MHz maximum operating frequency (200 ns instruction cycle), an integrated 8 MHz internal oscillator that eliminates external crystals in many designs, a 10-bit Analog-to-Digital converter with up to 7 channels, a capture/compare/PWM module, and dual configurable serial ports - an Addressable USART plus a Synchronous Serial Port that operates as either 3-wire SPI or 2-wire I2C. The 18-pin SOIC footprint is the most common PIC16F88 package and is interchangeable across the family. Architecturally, the PIC16F88 uses a Harvard structure with separate program and data buses, 14-bit wide Flash instructions, and a hardware stack eight levels deep. The internal 8 MHz oscillator can be calibrated in software using the OSCTUNE register, allowing ±1 percent frequency accuracy without external components. Brown-out Reset, Power-on Reset, and a Watchdog Timer with its own on-chip low-power oscillator are integrated, providing five distinct oscillator modes selectable via configuration fuses. Typical applications include battery-powered sensor nodes, automotive body controllers (when qualified through the -Q1 automotive grade), industrial control panels, and consumer appliances where a small pin count plus rich peripherals reduce external component count. Designers also use the PIC16F88-E/SO in legacy PIC16C7x socket replacements because the peripheral set and pinout are upward-compatible. When migrating between PIC16F87 and PIC16F88, only the enhanced CCP and the added USART capability differ - existing PCB layouts and firmware libraries transfer with minimal rework. Choose -E over -I when the end product is exposed to industrial ambient temperatures above 85 C, and pair the device with a PICkit programmer for in-circuit serial programming via the ICSP pins. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical engineering notes not found in the manufacturer datasheet alone.

RFQ İletişim
PIC16F88-E/SS - 8-bit MCU 7KB Flash 20MHz 20-SSOP | Microchip
PIC16F88-E/SS

PIC16F88-E/SS - 8-bit MCU 7KB Flash 20MHz 20-SSOP | Microchip

The Microchip Technology PIC16F88-E/SS is an 8-bit RISC CMOS Flash-based microcontroller in a 20-pin SSOP package, delivering 20 MHz (200 ns) instruction execution with 7 KB of Flash program memory, 368 bytes of RAM, and 256 bytes of EEPROM. The "E" suffix denotes the extended temperature grade (-40C to +125C), making this part suitable for industrial and harsh-environment deployments beyond the standard "I" grade (-40C to +85C). The SSOP suffix indicates the 5.30 mm body width 20-SSOP surface-mount package. An 8-bit microcontroller (MCU) is a programmable integrated circuit that combines a CPU, memory (Flash/RAM/EEPROM), and peripherals on a single die. MCUs sit at the lowest tier of the embedded computing hierarchy: MCU -> microcontroller -> embedded controller -> semiconductor. The PIC16F88 family belongs to Microchip's mid-range PIC16 architecture, which uses a Harvard-style RISC core with 35 single-word instructions and is upwards-compatible with PIC16C7x, PIC16C62xA, PIC16C5X, and PIC12CXXX devices. Key features include a built-in 8 MHz internal oscillator (eliminating the need for an external crystal in cost-sensitive designs), a 10-bit Analog-to-Digital Converter with up to 7 channels, an Addressable USART, a master Synchronous Serial Port configurable as 3-wire SPI or 2-wire I2C, a Capture/Compare/PWM module, and nanoWatt Technology power management with multiple low-power Sleep modes. The device operates across 2.0 V to 5.5 V supply. Typical applications include industrial sensor interfaces, low-cost motor control, battery-powered remote controls, smart sensor nodes, automotive body electronics (non-safety), consumer white goods, and home-automation peripherals. The wide operating range and integrated peripherals allow designers to minimize external component count, which reduces BOM cost and PCB area. When designing with this part, ensure the in-circuit serial programming (ICSP) interface is accessible for firmware updates, and place the internal oscillator calibration value (OSCCAL register) into the configuration bits to maintain frequency accuracy across temperature. Compared to the legacy PIC16C7x series, the PIC16F88's Flash memory eliminates UV-erase windows and simplifies inventory management. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not aggregated on the manufacturer datasheet.

RFQ İletişim
PIC16F88-I/ML - 20MHz 8-Bit Flash MCU | Microchip Technology
PIC16F88-I/ML

PIC16F88-I/ML - 20MHz 8-Bit Flash MCU | Microchip Technology

The Microchip Technology PIC16F88-I/ML is a 20 MHz, 8-bit CMOS Flash microcontroller with 7 KB of program memory, 368 bytes of RAM, 256 bytes of EEPROM, and 16 I/O pins in a 28-QFN package measuring 6 mm by 6 mm. According to the verified distributor data, it integrates a 10-bit, 7-channel analog-to-digital converter, an addressable USART, a synchronous serial port configurable for SPI or I2C, and PWM-capable capture/compare hardware. A microcontroller is a programmable integrated circuit that executes firmware, reads sensors, controls outputs, and coordinates embedded-system peripherals. Within the semiconductor hierarchy, the PIC16F88 belongs to Microchip's PIC16 family of 8-bit microcontrollers, Flash-based embedded controllers, and general-purpose semiconductor devices. Its compact package and mixed analog, digital, timing, and communications resources suit small control systems that need local sensing and actuator management. The verified specifications identify a maximum clock rate of 20 MHz, 4K by 14 words of Flash program memory, 368 bytes of RAM, 256 bytes of EEPROM data memory, and 16 I/O pins. An 8 MHz internal oscillator is listed on the Microchip product page, providing a clock source for applications that do not require an external crystal. The Flash architecture permits in-circuit reprogramming, while EEPROM supports nonvolatile parameter retention between power cycles. The PIC16F88 combines seven 10-bit ADC channels with an addressable USART and a synchronous serial interface supporting three-wire SPI or two-wire I2C operation. Capture/compare/PWM resources support timing and proportional control tasks. This peripheral mix reduces the need for external conversion or interface ICs when the design uses compatible sensors, displays, actuators, or serial transceivers. Typical embedded uses include industrial sensing modules, compact motor controllers, instrument interfaces, environmental monitors, and low-cost connected-control products. The 28-QFN package favors dense surface-mount layouts, but exposed-pad soldering, thermal management, and pin escaping require careful PCB design. Verify the exact package drawing and pin assignment against the manufacturer datasheet before layout release. For firmware development, use the PIC16 mid-range toolchain and confirm programming, clock, peripheral, and package constraints against the selected device documentation. The I/ML ordering code identifies the industrial temperature grade and ML package, but the supplied search data does not state the numeric temperature limits, supply voltage, ADC reference details, or electrical current ratings. Those values must be taken directly from the applicable Microchip datasheet rather than inferred. This page consolidates verified manufacturer and distributor facts, package details, application guidance, and procurement links. It also separates explicitly verified information from missing engineering data, helping engineers locate the PIC16F88-I/ML without relying on assumed specifications or unsupported drop-in substitutions.

RFQ İletişim
PIC16F88-I/P - 8-bit 20MHz MCU 7KB Flash DIP-18 | Microchip
PIC16F88-I/P

PIC16F88-I/P - 8-bit 20MHz MCU 7KB Flash DIP-18 | Microchip

The Microchip Technology PIC16F88-I/P is an 8-bit PIC16 family Flash microcontroller based on the enhanced mid-range architecture, delivering 20 MHz (200 ns instruction cycle) performance in a through-hole 18-pin PDIP package. The device integrates 7 KB (4K x 14 words) of self-programmable Flash program memory, 368 bytes of SRAM, and 256 bytes of EEPROM data memory. It features the Microchip nanoWatt power-managed core with multiple oscillator modes including an internal 8 MHz oscillator. A microcontroller (MCU) is a single-chip computer that integrates a CPU, program and data memory, peripherals, and I/O on one IC. The PIC16F88 sits within the Microchip PIC16 mid-range family, which forms part of the broader 8-bit microcontroller category alongside competing 8051, AVR and STM8 architectures. The PIC16 mid-range lineage is one of the most widely deployed 8-bit cores ever shipped, prized for its small footprint, low power, deterministic instruction set of 35 single-word instructions, and upwards compatibility with the PIC16 baseline and PIC18 families for code portability. Key features of the PIC16F88-I/P include 16 digital I/O pins, a 10-bit ADC with up to 7 input channels, an Enhanced Capture/Compare/PWM (ECCP) module, an Addressable USART (AUSART), and a Master Synchronous Serial Port (MSSP) configurable as SPI or I2C (master/slave). Two 8-bit timers plus one 16-bit timer provide flexible timing, while the nanoWatt feature set delivers reduced power consumption through sleep modes, oscillator switching, and on-the-fly clock source changes. The PIC16F88 is built on a CMOS process and runs from 2.0 V to 5.5 V across the industrial -40 C to +85 C temperature range (denoted by the "-I" suffix). The device is supported by Microchip's MPLAB X IDE, the XC8 C compiler, and the free MPASM assembler, with extensive application notes, firmware libraries, and development boards (PICDEM, Curiosity) shortening design cycles. Typical applications include sensor signal conditioning, motor control with PWM, industrial control panels, low-power battery sensor nodes, home appliance control boards, and serial-port-centric embedded products leveraging the integrated USART. The wide operating voltage and on-chip peripherals make the PIC16F88 a strong fit for retrofits of legacy designs that need modern features without abandoning the familiar PIC16 ecosystem. When designing with this part, ensure the in-circuit serial programming (ICSP) pins (RB6/RB7) and the MCLR pin are routed correctly for production programming and in-field firmware updates. The internal 8 MHz oscillator is calibrated at the factory, but for time-critical UART or PWM applications use an external crystal on OSC1/OSC2 for higher accuracy. This page synthesizes distributor pricing, drop-in alternatives within the PIC16 family, and practical design notes not found in the bare manufacturer datasheet.

RFQ İletişim
PIC16F88-I/SO - 8-Bit 20MHz Flash MCU | Microchip
PIC16F88-I/SO

PIC16F88-I/SO - 8-Bit 20MHz Flash MCU | Microchip

The Microchip Technology PIC16F88-I/SO is an 8-bit PIC microcontroller with a 20 MHz maximum operating frequency, 7 KB of Flash program memory, 256 bytes of EEPROM data memory, and seven 10-bit analog-to-digital conversion channels. It is supplied in an 18-pin SOIC package for compact embedded-control designs. The device also provides 16 I/O pins, 368 bytes of RAM, addressable USART, synchronous serial communication, capture/compare/PWM peripherals, and an internal 8 MHz oscillator according to the manufacturer product page. A PIC microcontroller is a programmable controller built around a small RISC core, integrated memory, and peripherals for digital and analog signal acquisition. The PIC16F88 belongs to the PIC16 family of 8-bit microcontrollers and sits within the broader embedded-controller and semiconductor hierarchy. Its combination of Flash memory, EEPROM, serial interfaces, timers, and ADC channels allows one device to supervise sensors, communicate with external equipment, and generate timing or control signals. Verified distributor data identifies 7 KB of Flash memory organized as 4K by 14 bits, 16 I/O pins, and an 18-SOIC package. The product page specifies an 8 MHz internal oscillator and 256 bytes of EEPROM. The manufacturer search result also identifies a capture/compare/PWM block, addressable USART, and a synchronous serial port configurable for 3-wire SPI or 2-wire I2C. The 7-channel, 10-bit ADC provides 1024 quantization levels over its selected reference range. The PIC16F88-I/SO is suited to compact industrial controllers, data-acquisition modules, sensor interfaces, communication bridges, and legacy control systems. Its 16 I/O pins can support digital inputs, outputs, and multiplexed analog functions while the serial peripherals reduce the need for external interface hardware. The 20 MHz maximum frequency supports faster control-loop and communication tasks, while the internal 8 MHz oscillator can reduce dependence on an external clock source. When laying out the PCB, use the manufacturer pin and package drawings rather than relying on generic SOIC conventions. Confirm the oscillator, programming, power, decoupling, I2C, SPI, USART, ADC-reference, and I/O connections against the datasheet. Because this is an 18-pin SOIC device, verify the exact package drawing and pin numbering before fabrication. This page consolidates verified distributor specifications, manufacturer feature information, a datasheet reference, application guidance, and conservative replacement analysis. Pricing and availability remain time-sensitive, so confirm current quotes before procurement.

RFQ İletişim
PIC16F88-I/SS - 8-bit MCU 7KB Flash 20MHz SSOP-20 | Microchip
PIC16F88-I/SS

PIC16F88-I/SS - 8-bit MCU 7KB Flash 20MHz SSOP-20 | Microchip

The Microchip Technology PIC16F88-I/SS is an 8-bit CMOS Flash-based microcontroller built on the PIC16 enhanced mid-range core, delivering 7KB of program Flash, 368 bytes of RAM, and 256 bytes of EEPROM data memory in a 20-pin SSOP package. The device executes instructions in a 200 ns cycle at 20 MHz, packs 16 digital I/O lines, and integrates an 8 MHz internal oscillator that eliminates the need for an external crystal in many designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, data memory, and peripherals onto one silicon die. The PIC16F88 belongs to the mid-range PIC16 family within the broader 8-bit PIC microcontroller portfolio (PIC10/12/16/18), positioned above baseline PIC10/12 parts and below the 16-bit dsPIC/PIC24 and 32-bit PIC32 families. It serves the same role in the system hierarchy as an Atmel/Microchip AVR ATmega or a basic STM8, providing deterministic single-cycle execution with a small footprint for cost-sensitive embedded control. Key features include seven channels of 10-bit Analog-to-Digital conversion, a Capture/Compare/PWM module, an Addressable USART, and a Synchronous Serial Port configurable as either 3-wire SPI or 2-wire I2C. The nanoWatt Technology power management suite offers multiple idle/sleep modes that reduce quiescent current to microampere levels, while the integrated ICD (In-Circuit Debug) interface enables flash programming and real-time debugging using only two I/O pins. Brown-out Reset, Watchdog Timer, and dual oscillator blocks round out the on-chip peripheral set. The PIC16F88 architecture combines a 14-bit instruction word, 35 single-word instructions, and a hardware multiplier absent from earlier mid-range devices, giving it approximately 5 MIPS throughput at 20 MHz. The Harvard bus structure separates program and data fetches, allowing instruction and operand reads to occur in the same cycle and yielding deterministic interrupt latency that designers rely on for real-time control loops. Typical applications include industrial sensor conditioning nodes, low-cost data acquisition front-ends, RS-485 Modbus slave terminals, small appliance motor control, battery-powered metering, and hobby/educational platforms where a feature-rich 8-bit MCU simplifies firmware. The combination of internal oscillator, EEPROM, and USART also makes it popular as a bridge controller in legacy-to-Modern protocol conversion designs. When designing with the PIC16F88-I/SS, plan a decoupling network of 100 nF plus 10 uF within 5 mm of the VDD pins and provide a stable analog AVCC rail even if the ADC is unused. Configure unused I/O as outputs to minimize sleep current and use the ICD pins RB6/RB7 exclusively for in-circuit debug or dedicate external pull-ups when those functions are required in production. This page synthesizes XAIPART distributor pricing, drop-in SSOP-20 alternatives sourced from the same Microchip PIC16 family, and practical design notes not aggregated on any single manufacturer or distributor page.

RFQ İletişim
PIC16F882-E/ML - 8-Bit 20MHz MCU 3.5KB Flash | Microchip
PIC16F882-E/ML

PIC16F882-E/ML - 8-Bit 20MHz MCU 3.5KB Flash | Microchip

The Microchip PIC16F882-E/ML is a powerful 8-bit CMOS flash-based microcontroller built on Microchip's PIC16 architecture, featuring 3.5KB (2K x 14) of program memory, 128 bytes of EEPROM data memory, and 20MHz CPU performance in a 28-pin QFN (6x6) exposed-pad package. The "-E" suffix denotes the extended industrial temperature grade (-40C to +125C), and "ML" indicates the surface-mount QFN package option, distinguishing this part from the I-temp I/ML sibling. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, peripherals, and I/O onto one silicon die. The PIC16F882 belongs to the mid-range PIC16 family, sitting between PIC10/PIC12 baseline parts and PIC18 enhanced parts. MCUs are the most widely produced computing category, embedded as decision-makers inside everything from white goods to industrial sensors; the PIC architecture in particular is known for deterministic single-cycle instruction execution, simple C and assembly tooling, and decades-long supply continuity. Key features include 128 bytes of EEPROM, self-programming support, an integrated 10-bit ADC, multiple PWM channels, USART, SPI, and I2C peripherals, and NanoWatt Technology power management with multiple sleep modes and ultra-low power consumption. The device operates from 2.0V to 5.5V across the full industrial temperature range, making it suitable for harsh-environment designs. The PIC16F882 uses a RISC-like Harvard architecture with only 35 single-word instructions, simplifying code development and reducing compiler overhead. With 20MHz clock speed yielding 200ns instruction cycles, the device delivers predictable real-time response. Integrated brown-out reset, power-on reset, and a watchdog timer with its own on-chip RC oscillator provide robust autonomous operation. Typical applications include consumer appliance control, automotive body and interior modules, industrial sensor interfaces, low-cost motor control, LED lighting controllers, and battery-powered instruments. The combination of extended temperature grade and the thermally-enhanced QFN package also makes it suitable for sealed-environment embedded designs where heat must be dissipated through the PCB. Designers should pay close attention to the exposed thermal pad of the QFN package: it must be soldered to a sufficient copper pour for both electrical grounding and thermal dissipation. The 28-QFN pinout differs from the 28-SOIC and 28-PDIP variants of the same die, so PCB layouts are not interchangeable across packages. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not assembled in the manufacturer datasheet, giving engineers a faster sourcing decision than navigating Microchip documentation alone.

RFQ İletişim
PIC16F882-E/SO - 8-Bit 20MHz 3.5KB Flash MCU 28-SOIC | Microchip
PIC16F882-E/SO

PIC16F882-E/SO - 8-Bit 20MHz 3.5KB Flash MCU 28-SOIC | Microchip

The Microchip Technology PIC16F882-E/SO is a CMOS FLASH-based 8-bit microcontroller from the PIC16 family, delivering up to 20 MHz CPU performance with 3.5KB (2K x 14 words) of on-chip program Flash, 128 bytes of data EEPROM, and 128 bytes of RAM, housed in a 28-pin SOIC wide-body package for industrial-grade -40C to +125C operation. The part is specified for the extended (E) temperature range and supports 2.0V to 5.5V operation across multiple supply rails (2.5V / 3.3V / 5V), giving it broad compatibility with battery, logic, and analog front-end designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, plus peripherals such as timers, ADCs, and communication controllers. The PIC16 family uses Microchip's enhanced mid-range 8-bit RISC architecture with only 35 single-word instructions, which keeps code density high and the learning curve gentle. Within the power-management hierarchy an MCU sits at the embedded-control layer above discrete logic, and within the broader PIC taxonomy PIC16F882 belongs to the PIC16F88x sub-family of FLASH, self-programmable devices. Key features include 11 channels of 10-bit ADC, two 8-bit and one 16-bit timer, an enhanced USART that supports RS-232, RS-485 and LIN, an MSSP module for SPI and I2C (master/slave), an enhanced PWM with up to 3 channels, a 2-level deep hardware stack, and 25 digital I/O pins with individually programmable weak pull-ups and interrupt-on-change. NanoWatt Technology provides multiple power-managed modes including run, idle, and sleep with ultra-low power consumption, making the device suitable for line-powered and battery-backed installations. Architecturally the PIC16F882-E/SO uses a 14-bit wide instruction word with a Harvard bus structure, providing deterministic instruction timing and a single-instruction-cycle 8x8 hardware multiplier. The on-chip in-circuit serial programming (ICSP) and self-programming allow field firmware updates via the production board, while the wide operating voltage window and on-board voltage reference simplify analog and mixed-signal designs. Typical applications include industrial automation and control, white goods in hardware such as washing machines and dishwashers, HVAC and thermostat controllers, low-end remote sensors, automotive body and lighting subsystems, security and alarm panels, and consumer appliances. The PIC16F882 is also well suited as a low-cost LIN slave node, a general-purpose I/O expander, or a small stepper-motor driver controller. When designing with this device, allocate a 4.7kohm pull-up on MCLR if low-voltage ICSP is desired, place a 100 nF decoupling capacitor as close as possible to each VDD pin, and ensure the 28-SOIC pad is connected to a contiguous ground plane for thermal relief. Avoid using the same I/O pin simultaneously as both an analog input and a digital output, and verify that the chosen clock source (internal 8 MHz or external crystal) is within the configuration-bit limits before committing to a final BOM. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and practical design notes for the PIC16F882-E/SO that are not found in the manufacturer datasheet alone, helping engineers shorten sourcing and qualification cycles for 28-SOIC PIC16 designs.

RFQ İletişim
PIC16F882-E/SS - 8-Bit MCU, 20MHz, 3.5KB Flash | Microchip
PIC16F882-E/SS

PIC16F882-E/SS - 8-Bit MCU, 20MHz, 3.5KB Flash | Microchip

The Microchip Technology PIC16F882-E/SS is a mid-range, 8-bit CMOS FLASH-based microcontroller in the PIC16F family, housed in a 28-pin SSOP package. It runs at up to 20MHz instruction rate (200ns instruction cycle) from 2.0V to 5.5V supply, integrating 3.5KB (2K x 14 words) of Flash program memory, 128 bytes of RAM, and 128 bytes of EEPROM data memory. The -E/SS suffix indicates the Extended (industrial) temperature range (-40C to +125C) and the SSOP-28 (5.30mm body width) surface-mount package. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, plus integrated peripherals such as timers, ADC, communication interfaces, and GPIO. PIC microcontrollers use a RISC Harvard architecture with only 35 single-word instructions, making them well-suited for embedded control applications where deterministic behavior, low power, and ease of programming are priorities. Within the semiconductor hierarchy, an MCU sits under Microcontrollers -> Integrated Circuits -> Semiconductors. Key features of the PIC16F882-E/SS include 11 channels of 10-bit Analog-to-Digital conversion, two analog comparators, one Capture/Compare/PWM (CCP) module plus one Enhanced CCP (ECCP), an Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART), an MSSP module supporting SPI and I2C (master and slave), 256 bytes of non-volatile EEPROM, self-programming capability, an ICD (In-Circuit Debugger) interface, and nanoWatt technology for low-power sleep modes. The 28-pin SSOP footprint delivers 22 I/O pins in a compact 5.30mm body. The PIC16F882 uses Microchip's enhanced mid-range 14-bit instruction set, with a hardware multiplier and interrupt controller supporting context-saving by hardware. The 2.0V to 5.5V wide operating range allows operation from a single Li-ion cell, two AA cells, or a regulated 3.3V or 5V rail. The device supports ICSP (In-Circuit Serial Programming) and ICD for field upgrades and debug without removing the chip from the board. Typical applications include consumer appliance controls, battery-powered sensor nodes, simple motor and lighting controls, RS-485/EUSART networked sensor hubs, and industrial automation auxiliary controllers. The wide operating voltage plus EEPROM data memory makes it attractive for parameter storage in field-deployed equipment. Its 11-channel 10-bit ADC provides sufficient resolution for many sensor-conditioning front-ends. When designing with the PIC16F882-E/SS, allocate one decoupling capacitor (100nF ceramic) per VDD pin and one bulk capacitor (10uF) near the supply entry. Use the ICSP header layout recommended in the Microchip programming specification to keep MPLAB X and PICkit debug tool compatibility. For low-power battery designs, switch to Sleep mode between ADC samples and use the Watchdog Timer or an external interrupt to wake. This page combines distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet, giving engineers a single source for sourcing and design-in decisions.

RFQ İletişim
PIC16F882-I/SO - 8-Bit 20MHz MCU 3.5KB Flash 28-SOIC | Microchip
PIC16F882-I/SO

PIC16F882-I/SO - 8-Bit 20MHz MCU 3.5KB Flash 28-SOIC | Microchip

The Microchip Technology PIC16F882-I/SO is an 8-bit CMOS FLASH-based PIC16 microcontroller running up to 20 MHz with 3.5 KB (2K x 14 words) of program memory, 128 bytes of SRAM, and 128 bytes of EEPROM data memory, housed in a 28-pin SOIC (SO) package with 25 user I/O pins. The -I suffix denotes the industrial temperature grade of -40C to +85C, suited to commercial and industrial embedded designs. According to the Microchip product page, the device supports 35 single-word instructions, easing migration across the PIC16F family. An 8-bit microcontroller (MCU) is a single-chip processor integrating CPU, RAM, non-volatile program memory, and peripherals (timers, ADC, communication modules) into one package. PIC microcontrollers occupy the broader category microcontrollers -> microcomputer -> embedded processor -> semiconductor. They are widely used as the central controller in cost-sensitive embedded designs where deterministic instruction execution and low power matter more than raw processing throughput, and they typically out-perform discrete logic solutions in flexibility and BOM density. Key features of this part include a 10-bit ADC with up to 11 input channels, two 8-bit timers plus one 16-bit timer, Capture/Compare/PWM (CCP) modules, an Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART), Master Synchronous Serial Port (MSSP) for SPI/I2C, two analog comparators, and a wide operating voltage range of 2.0 V to 5.5 V. The internal 8 MHz and 31 kHz oscillators, 16-level watchdog timer, and self-programming support simplify single-chip designs and field firmware upgrades. The PIC16F882 uses a Harvard-architecture RISC core with separate program and data buses, plus integrated debug via In-Circuit Debugger (ICD). NanoWatt Technology provides dynamic power-saving modes (idle, sleep with WDT, etc.). Brown-out Reset (BOR), Power-on Reset (POR), and configurable code protection harden designs against supply transients and firmware theft. Typical applications include industrial control panels, appliance control boards, automotive body and interior subsystems, low-end sensor hubs, LED lighting controllers, battery chargers, remote controls, and small consumer products. The combination of EEPROM data storage and self-programming makes the part suitable for field-upgradeable firmware with non-volatile parameter retention. When designing with this device, ensure decoupling (100 nF + bulk) is placed within 5 mm of VDD, and respect the 25 mA per I/O pin sink/source limit. Use Microchip's MPLAB XC8 toolchain and pickit debugger ecosystem for code development; the ICD pins (RB6/RB7) require no external components for debug. Pin assignment must keep RA pins analog-capable inputs for ADC use. This page synthesizes distributor pricing, drop-in alternatives, application examples, and practical design notes not found in the manufacturer datasheet. Pairs of pin-compatible PIC16F family alternates are explored in the alternatives section.

RFQ İletişim