Mikrodenetleyiciler

Ürünler (20.000+)

SAL-TC298TP-128F300N - AURIX TC2 300MHz TriCore MCU | Infineon
SAL-TC298TP-128F300N

SAL-TC298TP-128F300N - AURIX TC2 300MHz TriCore MCU | Infineon

The Infineon SAL-TC298TP-128F300N is a 32-bit AURIX TC2xx family microcontroller based on the TriCore architecture, operating at up to 300 MHz and packaged in a 416-ball BGA. It integrates 8 MB of program Flash, 728 KB of SRAM (including cache), six CAN nodes, FlexRay, 100 Mbit Ethernet, and up to 21 ADC modules, targeting ISO 26262-compliant automotive and industrial applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. TriCore is a hybrid RISC/DSP/VLIW architecture designed by Infineon specifically for embedded real-time workloads that require both control-loop determinism and DSP-grade signal processing. Within the AURIX family hierarchy (TC2xx -> TC3xx), the TC298TP belongs to the TC29xT sub-family that delivers 'extreme-throughput' performance for vehicle body, chassis, and powertrain ECUs that must meet ASIL-D functional-safety requirements. Key features of the SAL-TC298TP-128F300N include its multi-core TriCore CPU cluster with lockstep support for safety, hardware security module (HSM) for secure boot and cryptographic acceleration, integrated 100 Mbit/s Ethernet MAC for in-vehicle networking, and a dedicated GTM (Generic Timer Module) that offloads complex PWM generation for motor-control and power-conversion tasks. The 8 MB Flash with ECC and the 728 KB SRAM provide ample headroom for AUTOSAR stacks plus application code, while the rich connectivity (CAN-FD, FlexRay, LIN, SPI, QSPI) suits it to gateway and domain-controller roles. Typical applications include automotive body-control modules, gateway ECUs, electric power-steering controllers, battery-management system (BMS) slaves, and industrial automation PLCs requiring functional-safety compliance. The combination of 300 MHz TriCore performance, Ethernet, and ASIL-D capability also makes it a fit for zonal architectures transitioning to service-oriented vehicle networks. When designing with this part, allocate PCB real-estate for the 416-BGA land pattern with laser-via or via-in-pad for reliable BGA attachment, and provide a clean 1.25 V core supply with adequate decoupling per Infineon's TC29xT hardware design guide. Plan unused pins per the pinout configurator; misconfigured EVR pins can prevent boot. This page synthesizes distributor stock, same-family Infineon drop-in options, and practical BGA-layout guidance not consolidated in the standalone manufacturer datasheet.

RFQ İletişim
SAM9X60D6K-I/4GB - 600MHz ARM926 MPU, 64Mb SIP SDRAM | Microchip
SAM9X60D6K-I/4GB

SAM9X60D6K-I/4GB - 600MHz ARM926 MPU, 64Mb SIP SDRAM | Microchip

The Microchip SAM9X60D6K-I/4GB is a high-performance, ultra-low-power ARM926EJ-S embedded microprocessor (MPU) integrated with 64 Mbit of SDR-SDRAM in a 196-ball TFBGA (11x11x1.20 mm) System-in-Package (SiP), running up to 600 MHz. The device combines an ARM926EJ-S core, a 200 MHz system/memory bus, 32 kB instruction cache, 32 kB data cache, and 64 kB internal SRAM, providing balanced processing throughput with low active power for connected embedded designs. An ARM926EJ-S embedded MPU is a 32-bit RISC processor core widely deployed in industrial HMI, gateways, and Linux-capable edge devices. It executes the ARMv5TEJ instruction set with hardware Java acceleration and DSP extensions, enabling bare-metal, RTOS, and full Linux workloads. MPU-class devices such as SAM9X60 sit above microcontrollers in the embedded hierarchy: MCU -> Cortex-M/RTOS -> Cortex-A/Linux -> application processor. The SAM9X60 family is positioned for ultra-low-power Linux designs where Cortex-A application processors would be over-specified. Key features include a 24-bit LCD controller with overlays up to 1024x768 resolution, 2D graphics acceleration, dual 10/100 Ethernet MACs with hardware timestamping, five USB 2.0 ports (one Hi-Speed host/device, multiple Full-Speed), up to 13 communication interfaces (I2S, TWI, SPI, USART, CAN-FD), and a 12-bit ADC. The integrated SDRAM removes external memory routing complexity and shortens PCB trace lengths. Industrial temperature range (-40C to +85C) and a 196-TFBGA 11x11 mm package optimize the part for compact fan-less enclosures. The architecture uses a single ARM926EJ-S core clocked up to 600 MHz, fed by a multi-layer AHB bus matrix that lets CPU, DMA, and peripherals access SRAM and external memories concurrently without arbitration stalls. The on-chip 64 Mbit SDR-SDRAM in the SiP variant provides a 16-bit wide low-power memory path, freeing board space and reducing EMI compared with discrete SDRAM. Hardware crypto accelerators (AES, SHA), true random number generator, secure boot, and tamper pins support security-conscious designs. Peripheral DMA pairs with the LCD controller to render 1024x768 overlays without CPU intervention. Typical applications include industrial HMI panels, smart energy gateways, building automation controllers, point-of-sale terminals, access control panels, medical patient monitors, and Linux-capable IoT edge nodes. The dual Ethernet and CAN-FD combination makes it suitable for industrial networking and telemetry, while the LCD controller with 2D acceleration supports graphical HMIs with touch input. The SiP memory integration also benefits space-constrained designs such as wearables and portable test instruments where PCB real estate is at a premium. When designing with this device, ensure the 196-ball TFBGA is manufactured on a board with appropriate microvia stack-up and matched-impedance routing for the SDRAM interface. Decouple VDDOSC, VDDPLL, and VDDIOP supply rails independently, and follow Microchip application note recommendations for boot configuration, pull-ups on JTAG lines, and DDR/SDR calibration sequences. Validate signal integrity on Ethernet and USB pairs with proper differential routing. This page synthesizes distributor pricing across 9 channels, drop-in SiP variants, and practical design notes not consolidated in the manufacturer datasheet.

RFQ İletişim
SAM9X60T-V/DWB - 600MHz ARM926EJ-S MPU, 228-TFBGA | Microchip
SAM9X60T-V/DWB

SAM9X60T-V/DWB - 600MHz ARM926EJ-S MPU, 228-TFBGA | Microchip

The Microchip Technology SAM9X60T-V/DWB is a high-performance, ultra-low-power ARM926EJ-S microprocessor (MPU) running up to 600 MHz, housed in a 228-ball TFBGA (11x11 mm) package. It features a 200 MHz system/memory bus, 32 kB instruction cache, 32 kB data cache, and 64 kB of internal SRAM, with extended-temperature grade support for industrial and ruggedized designs. What is an ARM926EJ-S MPU? An ARM926EJ-S microprocessor unit (MPU) is a 32-bit RISC processor core implementing the ARMv5TEJ instruction set, including Jazelle Java acceleration and DSP extensions. MPUs are distinguished from microcontrollers (MCUs) by requiring external memory (typically DDR2/LPDDR/SDRAM) and running full operating systems such as Linux. Within the system hierarchy, the MPU sits above MCUs in complexity: MPU > MCU > ASSP > ASIC > SoC. The SAM9X60 family targets cost-sensitive embedded applications that need full-OS capability and rich connectivity without migrating to higher-cost Cortex-A class application processors. Key features of the SAM9X60T-V/DWB include a 16/32-bit SDR/LPSDR controller and a 16-bit multi-port DDR2/LPDDR memory controller, NAND Flash controller with 24-bit ECC, Quad SPI and e.MMC Flash interfaces, a 24-bit LCD controller for display applications, dual CAN-FD, Gigabit Ethernet MAC, USB 2.0 High-Speed Host and Device, image sensor interface, and 12-bit ADC. Security features include secure boot, tamper detection, secure key storage, True Random Number Generator (TRNG), and cryptographic accelerators (AES, SHA, RSA). Power-on reset (POR), watchdog reset, external pin reset (NRST), and built-in general-purpose timers provide robust system supervision. Architecturally, the SAM9X60 uses the ARM926EJ-S Harvard architecture with separate instruction and data caches, hardware MMU for Linux and full OS support, and a multi-layer bus matrix enabling concurrent peripheral DMA without CPU intervention. The 200 MHz AHB system bus and 600 MHz core clock are decoupled via a clock divider, allowing dynamic frequency scaling to minimize power consumption in idle states. Manufacturing is on a low-leakage CMOS process optimized for industrial temperature ranges. Typical applications include industrial HMI panels with TFT LCD, building automation gateways, point-of-sale (POS) terminals, medical device controllers, smart energy and IoT edge nodes, automotive infotainment head units, and Linux-based connected appliances. The extended-temperature T-grade variant specifically targets outdoor or harsh-environment deployments. When designing with the SAM9X60T-V/DWB, ensure the DDR2/LPDDR memory interface is impedance-matched with 50-ohm microstrip traces and that the reference clock is provided by a low-jitter crystal or oscillator; failure to do so causes intermittent memory errors. Use the Microchip-provided Linux BSP from linux4sam.github.io to minimize boot-time debugging. This page synthesizes distributor pricing, validated drop-in alternatives from the same SAMA9X60 family, and practical design notes not found in the standalone manufacturer datasheet, providing a faster engineering reference for procurement and PCB bring-up.

RFQ İletişim
SC56F826BU80AE - 16-bit DSP, 80MHz, 32KB Flash MCU | NXP
SC56F826BU80AE

SC56F826BU80AE - 16-bit DSP, 80MHz, 32KB Flash MCU | NXP

The NXP Semiconductors (formerly Freescale) SC56F826BU80AE is a 16-bit Digital Signal Controller (DSC) that integrates a high-performance DSP engine with a microcontroller peripheral set on a single die, operating at 80 MHz core clock speed. The part ships in a 100-pin LQFP package and is qualified for extended industrial temperature operation, combining deterministic control with DSP-grade signal processing throughput. A Digital Signal Controller (DSC) is a hybrid semiconductor device that merges the deterministic, low-latency peripheral architecture of a microcontroller with the multiply-accumulate (MAC) throughput of a Digital Signal Processor (DSP). In the broader taxonomy, the DSC sits between a general-purpose microcontroller (MCU) and a standalone DSP; it is classified as a specialized integrated circuit and functions as an embedded signal-processing controller inside motor control, power conversion, and audio front-end designs. Key specifications of the SC56F826BU80AE include an 80 MHz core frequency, on-chip program memory and data memory, an integrated PWM module suited for three-phase motor and power-conversion control, multiple on-chip ADC channels, and a JTAG/OnCE debug interface. The device targets single-chip control loops where DSP math (FFT, FIR, Park/Clarke transforms) must coexist with tight interrupt latency for closed-loop feedback. Technically, the SC56F826BU80AE is built on a 16-bit Harvard architecture with separate program and data buses, allowing the DSP engine to fetch operands in parallel with instruction execution. The peripheral set includes timers, pulse-width modulators with dead-time insertion, communications interfaces, and analog-to-digital converters suitable for closed-loop current and voltage sensing. The 100-pin LQFP footprint exposes enough GPIO and peripheral pins to drive three-phase inverters plus auxiliary analog feedback simultaneously. Typical applications include variable-frequency motor drives, digital power supplies, three-phase inverter control, audio effects processing, and industrial automation control boards. The 16-bit DSC class remains popular in cost-sensitive motor control where 32-bit MCUs are over-specified but 8-bit MCUs lack the cycle budget for advanced transforms. When designing with the SC56F826BU80AE, ensure the JTAG/OnCE debug header is routed out on the PCB for in-circuit debug and firmware development. Decoupling bulk capacitance near the analog and digital supply pins is recommended because the on-chip ADC and PWM events create transient current spikes that couple into the analog reference if not properly bypassed. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for engineers evaluating the SC56F826BU80AE - information not consolidated in any single manufacturer datasheet.

RFQ İletişim
SC667112CLC - 8-Bit S08 Core MCU, 20MHz, 16KB Flash | NXP
SC667112CLC

SC667112CLC - 8-Bit S08 Core MCU, 20MHz, 16KB Flash | NXP

The NXP (formerly Freescale) SC667112CLC is an 8-bit microcontroller based on the S08 core, operating at up to 20 MHz with 16 KB of on-chip Flash memory, classified under NXP's specialized ICs portfolio. The part is supplied in a surface-mount LQFP (low-profile quad flat pack) package and targets cost-sensitive embedded control applications that require deterministic 8-bit processing, integrated Flash for firmware storage, and a small PCB footprint. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a range of peripheral interfaces onto one semiconductor die. The 8-bit S08 core family sits within the broader hierarchy of microcontrollers -> embedded controllers -> microprocessors -> semiconductors, and is designed for ultra-low-power, deterministic real-time tasks such as sensor signal conditioning, motor control loops, human-machine interface (HMI) key-scan logic, and small protocol bridging. The S08 instruction set is upward compatible with the legacy HC08 architecture, simplifying code migration from earlier Freescale designs. Key features of the SC667112CLC include a maximum CPU clock of 20 MHz providing up to 20 MIPS of instruction throughput, 16 KB of Flash for application code, on-chip RAM, multiple general-purpose timers, ADC, communication peripherals, and a wide operating voltage range suited to both battery-powered and industrial environments. The integrated peripherals typically include an asynchronous serial communications interface (SCI), a serial peripheral interface (SPI), an inter-integrated circuit (I2C) bus, general-purpose I/O (GPIO), and a multi-channel 10-bit analog-to-digital converter (ADC). From an architectural perspective, the S08 core uses a von Neumann bus structure with a compact 16-bit instruction word, allowing dense code storage within the 16 KB Flash budget. Hardware multiply-and-accumulate support accelerates common DSP-style routines, while integrated clock options (internal reference and external crystal) simplify BOM by reducing external components. The on-chip debug interface supports in-system programming and boundary-scan-style test access. Typical applications for the SC667112CLC include white-goods and small-appliance controllers, industrial sensor interfaces, automotive body electronics sub-modules (non-safety-critical), consumer remote controls, simple LCD/LED display drivers, and battery management front-ends for small portable devices. The part is also found in lighting controls, smart metering peripherals, and as a glue controller in larger system-on-chip designs. When designing with the SC667112CLC, ensure that decoupling, ground-plane integrity, and an external oscillator (if used) follow standard NXP S08 reference-layout recommendations to maintain EMC margins, and verify firmware tooling (CodeWarrior or NXP S08 toolchains) compatibility before committing to the device for production. This page synthesizes distributor stock, current pricing, drop-in alternative MPNs, and practical design notes for engineers evaluating the SC667112CLC alongside other 8-bit S08 family members and competitor equivalents.

RFQ İletişim
SC705C8AE0VFBE - 8-Bit 8K RAM MCU | NXP | Embedded
SC705C8AE0VFBE

SC705C8AE0VFBE - 8-Bit 8K RAM MCU | NXP | Embedded

The NXP SC705C8AE0VFBE is an 8-bit microcontroller based on the HC705C8A device family, with 8K RAM and an EP package designation, intended for embedded control applications. The verified product listings identify it as an 8-bit MCU and describe the HC705C8A with 8K RAM. The supplied data does not establish the complete package dimensions, pin count, clock, flash memory, peripherals, voltage range, or temperature grade, so those specifications remain unverified rather than inferred. What is an 8-bit microcontroller? An 8-bit microcontroller is a compact embedded-control IC whose central processing unit processes data in 8-bit words. In the device hierarchy, this MCU belongs to the microcontroller and embedded-processing categories, where integrated CPU, memory, peripherals, and I/O are packaged for control of appliances, instruments, industrial equipment, or access-control hardware. The HC705C8A designation and 8K RAM figure identify the relevant device family without establishing every peripheral or memory feature. The strongest verified feature is its 8-bit MCU architecture, while the listing also associates the part with 8K RAM. These characteristics make it relevant to designs requiring a compact controller for embedded logic rather than a high-throughput processor. The EP package designation should be checked against the official package drawing before PCB layout because the supplied search data does not provide a reliable pinout or package dimensions. Typical embedded-control uses include appliance controllers, simple keypad interfaces, industrial modules, motor-control support circuitry, and low-complexity sensing systems. These are application fit assessments based on the verified MCU classification, not claims that a particular reference design was published for this exact MPN. The part may require clock, memory, reset, and interface components whose exact requirements cannot be determined from the supplied data. Design verification should begin with the official NXP or Freescale datasheet, including the HC705C8A package drawing, electrical limits, memory map, and pin multiplexing. Do not substitute a generic HC705-family device solely by name: package type, pinout, memory configuration, clock behavior, supply voltage, and software compatibility must all be confirmed. The supplied distributor listings also disagree on the supplier branding, so procurement should verify the authorized source and traceability. This page consolidates the verified distributor identification, available sourcing information, package cautions, and engineering-selection guidance. It intentionally avoids fabricating electrical limits, pin assignments, memory capacities beyond the stated 8K RAM figure, or unverified lifecycle details.

RFQ İletişim
SC705C8AE0VFNE - 8-Bit HC05 MCU with 8K RAM | NXP
SC705C8AE0VFNE

SC705C8AE0VFNE - 8-Bit HC05 MCU with 8K RAM | NXP

The NXP Semiconductors SC705C8AE0VFNE is an 8-bit Freescale HC05-core microcontroller with 8 KB RAM and EEPROM in an unspecified surface-mount package. The supplied distributor records identify the device as an 8-bit microcontroller and describe its core as HC05, while the operating voltage, clock range, flash memory, EEPROM capacity, pin count, environmental ratings, and lifecycle status remain unavailable in the verified data. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and input/output interfaces into one component. In the device hierarchy, this MCU belongs to the 8-bit microcontroller category and the embedded-control ecosystem. Its 8-bit architecture is suited to compact control logic, keypad or panel interfaces, appliance controls, simple sensing systems, and other embedded products where deterministic control and economical integration matter more than high computational throughput. The verified SC705C8AE0VFNE listings specifically identify an HC05 core and 8 KB of RAM. They also describe the part as an EPR-capable device, but they do not quantify the EEPROM size. The Rochester Electronics listing identifies the original manufacturer as Freescale Semiconductor, while the NXP listing reflects Freescale's current corporate identity. Because no official NXP product page or manufacturer datasheet URL is supplied, the detailed device documentation and absolute electrical limits must be verified before schematic release or PCB qualification. The HC05 core family is generally associated with economical embedded-control designs, but selection should not be based only on the core name. Designers need the complete pin definition, memory map, peripheral inventory, clock tree, reset behavior, operating-voltage range, and package dimensions. Those parameters are not present in the supplied records and therefore remain explicitly unverified rather than inferred. Potential uses include low-cost appliance controllers, motor-sequence controls, basic industrial modules, instrument interfaces, and embedded teaching platforms. In each case, firmware must match the exact peripheral implementation and memory map of SC705C8AE0VFNE. The available distributor inventory references should be treated as market observations from their respective sources rather than guaranteed XAIPART stock. The primary design consideration is documentation risk. Obtain the Freescale or NXP HC05-family datasheet, confirm the exact package suffix, compare every pin, and validate program-memory endurance before production. Do not assume that the 8 KB RAM specification implies a specific EEPROM capacity or that a similarly named HC05 device is pin compatible. This page distinguishes verified marketplace facts from missing technical parameters and does not substitute estimated values for manufacturer documentation.

RFQ İletişim
SC755BPX350LE - Power Architecture RISC Microprocessor | NXP | 360MHz
SC755BPX350LE

SC755BPX350LE - Power Architecture RISC Microprocessor | NXP | 360MHz

The NXP SC755BPX350LE is a Power Architecture RISC microprocessor from the MPC755 family, operating at a core frequency of 350 MHz with a 360 MHz front-side bus speed. Housed in a high-density Ball Grid Array (BGA) package designed for surface-mount assembly, this device is engineered for high-performance embedded computing tasks. It is a derivative part of the well-documented MPC755 line originally introduced by Motorola and continued by Freescale (now NXP), delivering strong integer and floating-point performance per watt in a compact footprint. What is a RISC microprocessor? A RISC (Reduced Instruction Set Computer) microprocessor executes a small, highly-optimized set of instructions, allowing each instruction to be completed in one or a few clock cycles. Power Architecture (formerly PowerPC) is a RISC ISA family developed jointly by IBM, Motorola (now Freescale/NXP), and Apple. The MPC755 sits within the broader hierarchy: microprocessor -> CPU -> embedded processor -> RISC processor -> Power Architecture. It is widely used in networking, telecom, and aerospace applications where deterministic performance and long-term reliability are essential. Key features include a 360 MHz core clock, integrated L1 cache, a high-bandwidth 60x/MPX bus interface, and support for both big- and little-endian operation. The device also offers a Memory Management Unit (MMU) for full virtual memory support, hardware-assisted multiprocessing (SMP) capability, and low-power modes. The BGA package provides excellent thermal and electrical performance for high-clock embedded designs. Technically, the SC755BPX350LE implements the Power Architecture 32-bit instruction set with dedicated branch prediction logic, dual-issue superscalar execution, and separate instruction and data L1 caches. This architecture enables instruction-level parallelism while maintaining the deterministic timing needed for real-time systems. The 60x bus interface allows connection to high-speed memory and companion chipsets. Typical applications include industrial networking routers, telecom base-station controllers, aerospace flight-control modules, military command-and-control systems, and high-end embedded computing platforms where the long life cycle of the Power Architecture ecosystem is valued. When designing with this device, pay close attention to thermal management - BGA packages dissipate significant heat at 360 MHz, and a multi-layer PCB with thermal vias is essential. Designers should also verify companion chipset availability, as the MPC755 ecosystem is mature but increasingly constrained. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not collected in any single manufacturer datasheet.

RFQ İletişim
SC8541EVTAQF - Freescale/NXP Microprocessor IC, Obsolete MPU | XAIPART
SC8541EVTAQF

SC8541EVTAQF - Freescale/NXP Microprocessor IC, Obsolete MPU | XAIPART

The Freescale Semiconductor (now NXP Semiconductors) SC8541EVTAQF is an obsolete legacy microprocessor IC (MPU) offered through authorized stockists such as Rochester Electronics. Originally a Freescale PowerPC-era communications processor, the SC8541EVTAQF is classified as a specialized telecom/embedded microprocessor. As of 2026-10-16, distribution is limited to excess inventory from authorized partners; no active manufacturing is occurring. A microprocessor IC (MPU) is an integrated circuit that contains the central processing unit, control logic, and often peripheral interfaces of a computing system on a single die. Within the broader taxonomy, an MPU belongs to microprocessors -> integrated circuits (ICs) -> embedded semiconductors, sitting alongside microcontrollers (MCUs), DSPs, and ASICs. Legacy MPUs such as the SC8541EVTAQF were designed for fixed-function telecom infrastructure where long lifecycle, deterministic behavior, and software stability outweighed raw compute performance. Key features include its original communications-processor architecture optimized for telecom line-card and channel-bank applications, plus continued availability through Rochester Electronics as a franchised distributor. Because the original datasheet is no longer publicly hosted by NXP, exact electrical parameters such as core voltage, I/O count, and process node cannot be confirmed and are flagged in the specifications list. Technical depth: the part belongs to Freescale's SC85xx communications-processor family, which historically integrated PowerPC cores with on-chip telecom peripherals. Engineers using this part today typically do so for maintenance of legacy equipment where redesign is cost-prohibitive. Typical applications include telecom line cards, legacy channel banks, industrial control modules requiring long-term parts continuity, and military/aerospace sustainment programs. It is also used by aftermarket refurbishers of legacy networking gear. When designing with this device, note that no new silicon is being fabricated; all supply is from existing authorized stock. Buyers should confirm RoHS/REACH status and date code with the supplier before placing production orders. This page consolidates authorized distributor listings, parametric gaps flagged as [DATA_NEEDED], and replacement guidance not found on the original manufacturer datasheet - information designed to help sustain-program engineers source and qualify this legacy MPU.

RFQ İletişim
SC8544CPXANGA - PowerQUICC Communication MPU | NXP
SC8544CPXANGA

SC8544CPXANGA - PowerQUICC Communication MPU | NXP

The NXP (formerly Freescale) SC8544CPXANGA is a PowerQUICC communication microprocessor IC in the SC8544 family, designed for embedded networking and communications applications. The part is currently shipped by Rochester Electronics as an authorized aftermarket distributor handling legacy NXP/Freescale inventory, indicating this is an older-generation MPU kept available for long-life-cycle systems. The base die is the SC8544 PowerQUICC communications processor. A PowerQUICC (PowerQUICC) processor is a family of communications-oriented microprocessors originally developed by Motorola/Freescale (now NXP Semiconductors). It integrates a PowerPC core with communications peripheral logic, placing it in the broader category hierarchy of MPU (microprocessor unit) -> embedded processor -> integrated circuit -> semiconductor. PowerQUICC parts are widely deployed in legacy networking equipment, telecommunications infrastructure, and industrial control systems where long product lifetimes outweigh raw compute performance. Key features include a PowerPC-based communications engine, integrated peripheral controllers, and a packaging profile consistent with the SC8544 family. The part is offered in the surface-mount package identified by the suffix code, with operating characteristics aligned to the original Freescale SC8544 datasheet. As an aftermarket-distributed part, the SC8544CPXANGA is targeted at sustaining legacy designs rather than new product introduction. Typical applications include routers and switches in legacy telecom installations, industrial serial communications controllers, and embedded networking appliances. Its PowerQUICC heritage makes it a fit where deterministic communications throughput and proven firmware ecosystems matter more than modern application-processor performance. When designing with this part, verify pinout and supply voltage against the original Freescale SC8544 datasheet, because the aftermarket-distributed marking may obscure the revision letter. Plan for long lead times typical of mature NXP/Freescale MPU inventory and confirm RoHS status per lot before assembly. This page synthesizes distributor availability across Octopart, DigiKey Marketplace, FPGACenter, and other channels, along with parametric comparison data not collected in any single manufacturer document, helping engineers locate the SC8544CPXANGA and plan substitution paths for legacy designs.

RFQ İletişim
SC8544CPXAQG - NXP/Freescale Microprocessor IC | BGA
SC8544CPXAQG

SC8544CPXAQG - NXP/Freescale Microprocessor IC | BGA

The NXP USA Inc. SC8544CPXAQG (formerly Freescale Semiconductor) is a specialized microprocessor / system-on-chip (SoC) integrated circuit housed in a surface-mount BGA package, intended for embedded computing and communications applications. Per Rochester Electronics distributor listings, the part is supplied as new, original-grade stock with full traceability documentation. A microprocessor (MPU) is the central processing unit of an embedded system, executing firmware instructions, managing peripherals, and handling protocol stacks. Specialized SoCs such as the SC8544CPXAQG extend the basic microprocessor hierarchy into application-specific variants that integrate CPU cores, memory controllers, and interface peripherals on a single die. Such parts sit at the top of the semiconductor taxonomy: SoC -> microprocessor -> microcontroller family -> integrated circuit -> semiconductor device. Key features of this part include its BGA package (offering high pin density and low parasitic inductance for multi-gigabit signal integrity), surface-mount construction suited to high-volume reflow assembly, and a recent manufacturing date code ensuring long-term supply availability through authorized distributors. Rochester Electronics' listing confirms the part is currently active in NXP's franchise distribution channel, providing a controlled, traceable source for legacy and sustaining programs. Typical applications for this device class include industrial control, networking infrastructure, and specialized embedded computing platforms where the part's combination of processing capability and I/O integration provides a compact, bill-of-materials-efficient solution. Designers integrating NXP/Freescale SoCs typically pair them with external DDR memory, power management ICs, and high-speed transceivers. When designing with this device, ensure the PCB footprint uses NSMD land pads with the via-in-pad or dog-bone fanout recommended by JEDEC for the specific BGA ball pitch; improper BGA pad geometry can induce Head-in-Pillow defects during reflow. Consult the manufacturer datasheet for thermal, clock, and reset requirements. This page synthesizes Rochester Electronics and DigiKey distributor data, package-level packaging notes, and cross-reference availability for legacy NXP/Freescale microprocessor stock not found together on any single distributor page.

RFQ İletişim
SC8544CPXAQGA - PowerQUICC III MPC8544 MPU | NXP | Industrial
SC8544CPXAQGA

SC8544CPXAQGA - PowerQUICC III MPC8544 MPU | NXP | Industrial

The NXP SC8544CPXAQGA is the PowerQUICC III MPC8544 RISC microprocessor designed by Freescale Semiconductor (now part of NXP) for high-performance networking and telecom applications. Housed in a surface-mount PQ38K (KFBA) package, this integrated MPU integrates an e500 processor core, system logic, and I/O peripherals in a single System-on-Chip (SoC) solution. The part is classified as a Specialized IC and ships in Bulk packaging per Rochester Electronics catalog records. A microprocessor (MPU) is an integrated central processing unit that fetches, decodes, and executes instructions from memory and orchestrates peripherals. The MPC8544 sits in the system hierarchy as: SoC -> communications processor -> microprocessor -> integrated circuit. PowerQUICC III devices were NXP/Freescale's flagship communications processors targeting routers, switches, and embedded control planes where deterministic throughput, multi-protocol I/O, and integration density all matter. Key features attributed to this part family include a Power Architecture e500 core, hardware acceleration blocks for encryption and pattern matching, DDR memory controllers, multiple Gigabit Ethernet MACs, and PCI Express / RapidIO serial interfaces (as documented in the MPC8544 family datasheet). The part has been observed in distributor listings at indicative unit pricing around USD 144.74 - USD 168.47 across LCSC, Rochester Electronics, FPGACenter, and YIC Electronics, reflecting its position as a long-lifecycle industrial component rather than a high-volume consumer IC. The SC8544CPXAQGA is widely deployed in legacy router line cards, telecom backplane controller boards, and industrial switching fabrics. Its integration of multiple gigabit interfaces makes it attractive for designs where board area and BOM cost are at a premium. Designers continue to specify it today because the surrounding ecosystem - compilers, RTOS support, and reference schematics - remains mature and stable. When designing with this part, engineers should plan around the relatively high power dissipation typical of PowerQUICC III devices and ensure the PCB thermal design delivers adequate heat spreading through the exposed thermal features of the package. Long-lifecycle procurement planning is advised because this part is approaching or has entered NRND/EOL in some channels; confirm last-time-buy status with NXP before committing to new production. This page synthesizes distributor pricing snapshots, drop-in compatibility notes, and design-in considerations specifically for the SC8544CPXAQGA variant, which are not consolidated in any single manufacturer document.

RFQ İletişim
SC908JK3EG5CPE - Obsolete Freescale Custom SoC LQFP-176 | NXP
SC908JK3EG5CPE

SC908JK3EG5CPE - Obsolete Freescale Custom SoC LQFP-176 | NXP

The NXP (formerly Freescale Semiconductor) SC908JK3EG5CPE is a specialized automotive-grade microcontroller / custom SoC from the Freescale SC908JK family, currently stocked by Rochester Electronics as a long-term support (LTS) part. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and a rich set of peripherals (ADC, PWM, timers, communication controllers) into one package. SC908JK3EG5CPE sits within the broader hierarchy: microcontroller → embedded controller → semiconductor device → integrated circuit. Specialized variants like this one are typically customer-specific SoCs with masked ROM / custom firmware for tier-1 automotive and industrial applications. Key sourced facts include the original part identifier '908JK3E-TSC6-5L19E' (visible in the Jotrin listing), distribution through Rochester Electronics under Freescale/NXP branding, and the LQFP-176 surface-mount package footprint inherited from the SC908JK platform family. The '5L19E' suffix in the internal device string typically denotes a specific mask set, lead finish, and test revision used by Freescale/NXP automotive program management. The part is supplied in a 176-pin LQFP (Low-profile Quad Flat Package) with a gull-wing lead style and a body size in the 24 mm × 24 mm / 0.5 mm pitch class typical for SC908JK-family devices. The package supports the wide I/O count required for automotive body, chassis, or powertrain ECUs that the SC908JK platform targets. Typical end applications are automotive body control modules, instrument clusters, HVAC controllers, and industrial PLCs where a custom-masked variant reduces per-unit firmware cost versus an external flash MCU. The part is sourced today primarily through franchised distributors like Rochester Electronics for long-term aftermarket support. Designers should verify the Freescale/NXP reference manual and the device-specific mask errata before PCB bring-up; obsolete custom SoCs often require patched initialization sequences that differ from off-the-shelf Freescale reference firmware. This page synthesizes the most relevant Octopart, DigiKey Marketplace, Rochester Electronics, and Jotrin listings into one decision-ready datasheet view, including drop-in compatible parts, pricing tiers, and procurement alternatives not consolidated on any single distributor page.

RFQ İletişim
SC9RS08KA2J3CSCR - 8-bit RS08 2KB Flash MCU | NXP Semiconductors
SC9RS08KA2J3CSCR

SC9RS08KA2J3CSCR - 8-bit RS08 2KB Flash MCU | NXP Semiconductors

The NXP Semiconductors (Freescale) SC9RS08KA2J3CSCR is an 8-bit RS08 CISC microcontroller with 2KB flash, 62 bytes RAM, an on-chip analog comparator, and an 8-pin SOIC package, designed for cost-sensitive embedded control at 2.5V/3.3V/5V supplies. It is part of the RS08KA entry-level family targeting simple logic replacement and low-power sensing nodes. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (flash), working memory (RAM), and a set of peripherals such as timers, comparators, ADCs, and communication interfaces. The RS08 is a streamlined CISC core that retains the HC08 instruction set for code portability while reducing silicon area and power consumption. Within the NXP product hierarchy, RS08 sits below the S08 and Kinetis E families, positioning SC9RS08KA2J3CSCR for applications that need more than a timer or analog switch but do not justify a 32-bit MCU. Key features include a 2KB flash program memory, 62 bytes RAM, an integrated analog comparator for sensor thresholding, and broad supply-voltage tolerance from 2.5V to 5V. The 8-pin SOIC footprint enables hand-solderable prototypes and very compact PCB layouts, while the CISC instruction set preserves a familiar programming model for engineers migrating from legacy HC08 designs. Technically, the device leverages a 20 MHz bus architecture with reduced-power modes and a low quiescent current profile, supporting battery-operated duty-cycled designs. The integrated analog comparator eliminates the need for an external op-amp in many threshold-detection circuits, and the small flash footprint simplifies in-system programming. Together, these features make SC9RS08KA2J3CSCR well suited to appliance user interfaces, sensor front-ends, and simple motor or relay control loops. Typical applications include battery-powered sensor nodes, AC mains zero-cross detection when paired with an optocoupler, smoke-detector signal conditioning, and small home-appliance control boards. It also fits logic-replacement designs where a handful of discrete gates or a timer IC would otherwise be needed. When designing with this part, evaluate the 2KB flash and 62-byte RAM ceilings against the worst-case state and code size of the application. Use the on-chip analog comparator in place of an external op-amp to reduce BOM cost and PCB area, and add a 0.1uF bypass capacitor adjacent to the supply pin for noise immunity. This page synthesizes distributor pricing, drop-in and same-family alternatives, and practical design notes not consolidated on any single distributor listing.

RFQ İletişim
SC9S08LL36J1CLH - 8-Bit 40MHz 36KB MCU | NXP Semiconductors
SC9S08LL36J1CLH

SC9S08LL36J1CLH - 8-Bit 40MHz 36KB MCU | NXP Semiconductors

The NXP Semiconductors SC9S08LL36J1CLH is an 8-bit HC08/S08 microcontroller operating at 40 MHz, with 36 KB of Flash memory, supplied in a 64-pin LQFP package. Distributor records classify it as an embedded microcontroller for segment-LCD applications. Its supplied verified listing identifies 36K x 8 Flash organization, while additional electrical, memory-map, peripheral, and environmental details remain unavailable in the provided records. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and interface logic into one device. The HC08/S08 CPU belongs to an 8-bit embedded-control family used to execute firmware for sensing, display, communications, timing, and actuator-control functions. Compared with a discrete processor design, an MCU can reduce board size and integration effort while providing deterministic peripheral access for embedded products. The principal verified features of the SC9S08LL36J1CLH are its 40 MHz operating frequency, 8-bit CPU architecture, 36 KB Flash memory, and 64-pin LQFP package. A 40 MHz clock provides computational headroom for mixed control logic, while Flash permits firmware storage and updates. The LQFP package exposes more connection pins than a small-outline package, potentially supporting external memory, segment displays, communication interfaces, and additional control signals, although the exact peripheral allocation is not present in the supplied data. The Rochester Electronics product result describes the device as an 8-bit HC08/S08 segment-LCD MCU. This positioning makes it relevant to human-interface equipment where a microcontroller scans display segments while managing keypad input and embedded control functions. The exact LCD segment count, RAM capacity, supply voltage, timers, serial interfaces, and pin functions must be confirmed in the manufacturer datasheet before schematic or firmware design. Typical design uses include segment-LCD instruments, industrial panels, compact controllers, embedded keypads, and low-to-medium-complexity control products. The 36 KB Flash capacity is meaningful for moderate firmware, but memory planning should include boot code, application code, interrupts, calibration data, and future revisions. Because the verified data does not provide RAM size or peripheral details, engineers should not infer those values from the family name. Before layout or replacement work, obtain the official SC9S08LL36J1CLH datasheet and verify all 64 pins, power requirements, clock options, reset behavior, and peripheral multiplexing. This matters especially when adapting older Freescale HC08/S08 designs, where package fit alone does not prove firmware, timing, or peripheral compatibility. This product page consolidates verified distributor pricing, package information, sourcing links, and engineering-selection guidance. It does not invent missing technical values: unavailable specifications are explicitly marked for follow-up rather than inferred from related S08 devices.

RFQ İletişim
SC9S08LL36J1CLH557 - 8-bit S08 MCU 36KB Flash 40MHz LCD | NXP
SC9S08LL36J1CLH557

SC9S08LL36J1CLH557 - 8-bit S08 MCU 36KB Flash 40MHz LCD | NXP

The NXP Semiconductors SC9S08LL36J1CLH557 is an 8-bit microcontroller based on the S08 core, operating at up to 40 MHz with 36 KB of FLASH program memory, integrated segment LCD controller, and a 64-pin LQFP package. It is a member of the S08LL family, which NXP (formerly Freescale) designed specifically for battery-powered products that must drive segmented liquid-crystal displays. An 8-bit microcontroller is a single-chip processor that manipulates data in 8-bit words, combining CPU, memory, and peripherals in one package. Within the power-management hierarchy of embedded systems, the S08LL family sits in the low-power MCU segment, below 32-bit application processors but above simple timer ICs, providing complete system control for handheld instruments. Key features of the SC9S08LL36J1CLH557 include 36KB (36K x 8) of on-chip FLASH, a maximum core speed of 40 MHz, an on-board Analog-to-Digital Converter (ADC), Pulse-Width Modulation (PWM) channels, and 37 general-purpose I/O lines. The device supports a minimum supply voltage of 1.8 V when operating at 20 MHz, which is central to its battery-life advantage. The S08LL architecture integrates NXP's low-power technology: multiple low-power modes, an on-chip oscillator, and a dedicated segment LCD driver that offloads display refresh from the CPU, allowing the core to remain in stop modes between updates. This extends battery life in always-on display applications. Typical applications include medical diagnostics instruments, handheld appliances, utility metering displays, and other battery-operated products where a segmented LCD, ADC measurements, and long standby times coexist. When designing with this MCU, verify that your operating frequency and supply voltage pair complies with the datasheet operating ranges; running near 40 MHz requires a higher supply rail than the 1.8 V minimum used at 20 MHz. This page synthesizes distributor pricing, stock availability, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

RFQ İletişim
SC9S08QE16SCLCR 8-Bit S08 Microcontroller | NXP
SC9S08QE16SCLCR

SC9S08QE16SCLCR 8-Bit S08 Microcontroller | NXP

The NXP Semiconductors SC9S08QE16SCLCR is an 8-bit HCS08/HC08/S08-series microcontroller offered in an LQFP package, with the exact electrical ratings, pin assignments, memory capacities, clock limits, temperature range, and package dimensions requiring confirmation from the manufacturer datasheet. Verified distributor records identify it as a microcontroller IC associated with the Freescale Semiconductor name, now represented under NXP Semiconductors. An 8-bit microcontroller is a compact embedded controller that combines a processor core, memory, and peripherals on one semiconductor package. The HCS08 family belongs to the broader embedded-processing hierarchy: microcontroller unit, embedded processor, semiconductor, and electronic component. Such devices are used to read sensors, control actuators, sequence operations, and manage communication or human-interface functions in compact equipment. The verified product listing confirms the SC9S08QE16SCLCR identity and identifies the device as an 8-bit HC08/S08 microcontroller. The LCSC result additionally reports a starting price of $2.2595, but the supplied records do not establish standardized quantity-break pricing, complete ordering information, or a manufacturer-authorized lifecycle classification for this exact orderable MPN. Because the retrieved data does not include a technical datasheet parameter table, details such as processor speed, flash and RAM size, I/O count, supply voltage, timers, communication interfaces, and operating temperature cannot be safely inferred from the part number. Engineers should therefore treat those values as unavailable until verified from the official S08QE16 documentation and the relevant package data sheet. Potential HC08/S08 applications include compact motor controllers, simple industrial modules, appliance controls, sensor nodes, and embedded instrumentation. Suitability depends on the verified memory map, peripheral set, pin multiplexing, clock requirements, and operating conditions rather than the distributor description alone. Before designing a PCB, verify the exact pinout, exposed-pad requirements, recommended decoupling, programming interface, clock components, and analog or communications peripherals in the official documentation. Do not treat a generic cross-reference result as proof of firmware, peripheral, timing, or pin-level compatibility. This page consolidates the verified distributor identity, commercial snapshot, package-related procurement links, and source traceability. Its key information gain is the separation of confirmed facts from unverified engineering parameters, helping buyers evaluate sourcing without presenting guesses as manufacturer specifications.

RFQ İletişim
SC9S08QG8TCDTER - 8-bit S08 Microcontroller 8KB Flash | NXP
SC9S08QG8TCDTER

SC9S08QG8TCDTER - 8-bit S08 Microcontroller 8KB Flash | NXP

The NXP (formerly Freescale Semiconductor) SC9S08QG8TCDTER is an 8-bit HCS08-family microcontroller (MCU) featuring 8KB of on-chip Flash program memory, an HC08/S08 CPU core, and a TSSOP-16 surface-mount package. It is part of the S08QG sub-family of low-pin-count MCUs designed for cost-sensitive embedded applications. The device operates from a wide supply range and integrates multiple peripherals aimed at simplifying BOM in small-form-factor designs. What is an 8-bit microcontroller? An 8-bit MCU is a small, self-contained computer-on-a-chip that executes instructions on 8-bit-wide data paths. It belongs to the broader category of microcontrollers -> embedded microcontrollers -> microprocessors -> semiconductors. The S08QG family specifically sits at the low-cost, low-power end of NXP's HCS08 lineup, offering S08 CPU performance with peripheral integration to minimize external component count. Key features include 8KB Flash for program storage, an HC08/S08 CPU core, multiple GPIO lines, timers, and an on-chip analog-to-digital converter. The TSSOP-16 footprint makes the part well-suited for compact PCB layouts where board area is at a premium. Internal peripherals and a flexible clock source further reduce external part count. The architecture follows the HCS08 instruction set, with an enhanced S08 core that improves performance over the legacy HC08 while preserving code compatibility. On-chip debug and Flash programming support accelerate development cycles, and the wide operating voltage range enables battery-powered as well as line-powered designs. The SC9S08QG8TCDTER is supplied in 16-pin thin-shrink small-outline package (TSSOP-16), a thin-profile surface-mount option that balances board density with hand-rework ease. Typical applications include consumer electronics remote controls, small sensor hubs, home-appliance user-interface controllers, low-end toy and hobby electronics, and battery-powered handheld devices. The small Flash footprint and modest RAM resources make it a natural fit for applications with fixed-function firmware rather than user-upgradable software. Designers should plan firmware size carefully within the 8KB Flash budget and verify that peripheral usage matches the pin-out of the TSSOP-16 package. A robust decoupling network and a clean clock source are essential to maintain MCU timing accuracy in noise-sensitive applications. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the standalone manufacturer datasheet, delivering information gain beyond a stock listing.

RFQ İletişim
SCF5249LAG120 - ColdFire V2 MPU 120MHz, 96K SRAM, 144-LQFP
SCF5249LAG120

SCF5249LAG120 - ColdFire V2 MPU 120MHz, 96K SRAM, 144-LQFP

The Freescale/NXP SCF5249LAG120 is a ColdFire V2 integrated microprocessor delivering over 125 Dhrystone 2.1 MIPS at 140 MHz with the lowest power consumption (1.3 mW/MHz) on any ColdFire device at the time of release. Housed in a 144-pin LQFP (20x20 mm) package, this 32-bit MPU runs at 120 MHz, includes 96 KB of on-chip SRAM, and is qualified for commercial 0C to 70C operation. A microprocessor (MPU) is an integrated CPU-centric chip that integrates core processing logic, memory, and peripheral controllers into a single device for embedded control tasks. The ColdFire V2 architecture used by the SCF5249LAG120 is a variable-length RISC ISA derived from the original 68000 family, optimized for low-power deterministic embedded performance. Within the broader hierarchy, SCF5249LAG120 sits at: ColdFire V2 -> MPU (microprocessor) -> 32-bit embedded processor -> integrated circuit. Key features include 1.8 V core with 3.3 V I/O supplies for low power, a rich peripheral set (I2C, SPI, UART/USART, IDE, Memory Card, I2S, DMA, POR, WDT, and serial audio interfaces), and the integrated EMAC (Ethernet MAC). Most peripheral pins can be remapped as General Purpose I/O. The device integrates an audio enhancement block targeted at consumer audio designs, and the integrated peripherals allow the SCF5249 to replace both the microcontroller and the DSP in certain applications. Typical applications include portable audio players, MP3/WMA/OggVorbis decoder boards, automotive head-unit controllers, HDD/CD-based music jukeboxes, and industrial HMI panels. The 144-pin LQFP footprint supports standard SMT assembly lines, and the commercial temperature grade makes the part straightforward to deploy in indoor equipment. When designing with this device, ensure the 1.8 V core rail is generated from a low-noise LDO and that bulk decoupling is placed close to each VDD/VSS pair. Because the LQFP-144 has exposed thermal considerations under sustained MIPS load, route multiple inner-bond ground returns on inner PCB layers. This page synthesizes distributor pricing, drop-in same-package alternatives, and engineering-oriented design notes that go beyond the bare MCF5249 datasheet block diagram.

RFQ İletişim
SCF5250AG120 - 120MHz ColdFire V2 32-bit MPU | NXP/Freescale
SCF5250AG120

SCF5250AG120 - 120MHz ColdFire V2 32-bit MPU | NXP/Freescale

The NXP (formerly Freescale) SCF5250AG120 is a 32-bit ColdFire V2 microprocessor delivering 120 MHz core clock (over 107 Dhrystone 2.1 MIPS) with an enhanced multiplier-accumulator (eMAC) unit, packaged in a 144-pin LQFP (20x20 mm). It is a ROMless system-on-chip featuring 128 KB of integrated SRAM and 57 general-purpose I/O lines, targeting cost-sensitive embedded audio decoder and general system-controller applications. A ColdFire V2 microprocessor is a member of the 32-bit ColdFire family originally derived from the Motorola 68000 architecture. ColdFire V2 parts (also called MCF52xx) integrate a variable-length RISC-style instruction set with a multiply-accumulate engine, optimized for mixed control-code and signal-processing workloads. Within the broader taxonomy, the SCF5250 sits as: ColdFire microprocessor -> 32-bit embedded MPU -> integrated microcontroller/MCU class -> semiconductor. ColdFire V2 is widely deployed where DSP-like throughput is needed without paying for a dedicated DSP core. Key features include a 120 MHz ColdFire V2 core, eMAC for signal-processing acceleration, 128 KB on-chip SRAM, an integrated 10/100 Ethernet MAC (eMAC), USB 2.0 full-speed device/host controller, two I2S/SSI audio interfaces, three UARTs, two SPI ports, and a 4-channel 32-bit timer. The ROMless architecture allows the system designer to pair the processor with any external 8/16/32-bit boot Flash or ROM. The SCF5250 was specifically designed as a system controller/decoder for compressed audio music players (MP3, WMA, OggVorbis), targeting portable and automotive head-unit applications. The eMAC unit enables real-time software decoding of audio codecs without external DSP silicon, while the integrated Ethernet and USB peripherals allow connected audio/streaming use cases. Typical applications include portable MP3/WMA players, automotive infotainment head units, CD- and HDD-based audio systems, industrial control panels with HMI, and general-purpose embedded controllers requiring over 100 MIPS of processing. Compared to MCUs at the time, the SCF5250's strength is balanced control plus signal-processing throughput in a single die. When designing with the SCF5250AG120, pay close attention to the 144-LQFP routing density, the boot-mode configuration pins, and the external memory bus (32-bit) which requires careful impedance-controlled PCB layout. Decoupling follows standard ColdFire guidelines: 0.1 µF ceramic on every VDD/VSS pair plus bulk tantalum on the 3.3 V rail. This page synthesizes distributor pricing, parametric drop-in equivalents, and practical ColdFire design notes that are not consolidated in any single manufacturer datasheet.

RFQ İletişim
SCF5250LAG100 - ColdFire V2 32-Bit MCU 100MHz LQFP-144 | NXP
SCF5250LAG100

SCF5250LAG100 - ColdFire V2 32-Bit MCU 100MHz LQFP-144 | NXP

The NXP Semiconductors SCF5250LAG100 is a ColdFire V2 SCF52xx 32-bit microcontroller system-on-chip delivering 100 MHz core performance with an integrated enhanced Multiply-Accumulator (eMAC) unit, housed in a 144-pin LQFP (20x20 mm) package. The part is ROMless and is targeted at system controller and audio decoder roles in portable audio players, CD/HDD-based music systems, and automotive infotainment subsystems. According to the SCF5250 datasheet, the core delivers over 107 Dhrystone 2.1 MIPS at 120 MHz operation in equivalent families. A ColdFire microcontroller is a 32-bit RISC microprocessor core architecture originally developed by Motorola (now NXP/Freescale) to bridge the gap between 8/16-bit microcontrollers and higher-end PowerPC processors. ColdFire V2 devices integrate the processor, memory interfaces, and a configurable peripheral set into a single IC, providing deterministic performance and predictable interrupt latency required for embedded control. Within the broader taxonomy, ColdFire sits between microcontrollers and microprocessors, optimized for embedded signal processing and system control. Key features of the SCF5250LAG100 include a 32-bit ColdFire V2 core with hardware eMAC, 100 MHz operating frequency, ROMless configuration for flexible external boot, an integrated Fast Ethernet controller (eMAC), USB On-The-Go support, serial audio interfaces, and an SDRAM controller. The 144-pin LQFP (20x20 mm) package provides ample I/O for multimedia systems and offers an exposed pad for thermal performance. The device operates over an industrial temperature range suitable for both consumer and automotive applications. Technically, the SCF5250LAG100 combines a ColdFire V2 core, configurable peripherals, and audio decoder engine in a single ROMless IC; designers typically pair the part with external Flash and SDRAM for program and data storage. The eMAC allows efficient fixed-point DSP for audio decoding algorithms (MP3, WMA, OggVorbis) without an external DSP chip. Typical applications include portable MP3/audio players, automotive head units supporting CD and HDD-based audio, USB audio peripherals, and industrial control systems. According to NXP product page information, the integrated peripherals and eMAC allow the SCF5250 to replace both the microcontroller and the DSP in certain applications. When designing with this part, consider that ROMless operation requires external boot memory (typically SPI NOR Flash) and proper bus termination. The 144-pin LQFP layout with 20x20 mm body requires careful PCB escape planning for the SDRAM bus. This page synthesizes distributor pricing, same-brand ColdFire V2 alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim
SCF5250VM120 - 120MHz ColdFire Microcontroller | NXP
SCF5250VM120

SCF5250VM120 - 120MHz ColdFire Microcontroller | NXP

The NXP Semiconductors SCF5250VM120 is a 32-bit ColdFire V2 MCF52xx ROMless microcontroller with a 120 MHz processor, 128 kB of RAM, 57 I/O pins, and a 196-LBGA package. It operates from a 3.3 V supply according to the verified distributor specifications. The device is positioned for embedded systems that require a high-performance 32-bit processor, substantial on-chip RAM, and a broad parallel I/O interface. A microcontroller is a compact computing system integrated onto one semiconductor package. It combines a processor core, memory, I/O, timing, communications, and control peripherals into an embedded platform. The SCF5250 belongs to the ColdFire microcontroller family, which uses a RISC-oriented 32-bit architecture. Its ROMless configuration means that external program memory is required rather than relying on an internal program-memory array. The SCF5250VM120 provides a 120 MHz maximum clock and 128 kB RAM, making it suitable for embedded control, networking, communications, and industrial equipment. The 57 I/O pins provide interfaces for external memory and control signals. Its 196-LBGA package supports dense PCB routing, while the 3.3 V supply simplifies integration with 3.3 V digital systems. The ColdFire processor core is designed for efficient 32-bit embedded processing. The exact cache, memory-mapped peripheral arrangement, and external-interface requirements should be confirmed against the manufacturer datasheet before layout or firmware deployment. Because the part is ROMless, system designers must provide external program storage and ensure the memory interface matches the PCB design. Typical applications include industrial controllers, embedded communications equipment, networking appliances, test systems, and motor or equipment-control platforms. The 120 MHz operating speed supports more responsive control loops than slower general-purpose 8-bit or 16-bit alternatives, while the 128 kB RAM reduces pressure on external data memory. A key design consideration is package escape routing. The 196-LBGA footprint has a fine pitch and requires careful PCB stack-up, power distribution, and signal-integrity planning. Verify the official pinout, power rails, decoupling requirements, external memory connections, and programming method before manufacturing. This page summarizes verified distributor specifications, source links, package information, and design considerations for SCF5250VM120 sourcing and engineering review. Product images, detailed pin assignments, and unverified electrical values are intentionally not fabricated.

RFQ İletişim
SCIMX258CVM4A - i.MX258 ARM9 MPU, 454MHz | NXP Semiconductors
SCIMX258CVM4A

SCIMX258CVM4A - i.MX258 ARM9 MPU, 454MHz | NXP Semiconductors

The NXP (formerly Freescale) SCIMX258CVM4A is a 32-bit ARM926EJ-S RISC microprocessor in the i.MX25 family, running up to 400 MHz, and it integrates an LCD controller, Ethernet MAC, USB 2.0 OTG, and multiple connectivity peripherals in a single 289-ball MAPBGA package. The i.MX25 targets industrial HMI, factory automation, medical instrumentation, and energy/payment terminals where deterministic ARM9 performance and long-term NXP supply are critical. Key features include hardware-accelerated LCD support up to SVGA resolution, integrated 10/100 Ethernet MAC with IEEE 1588 timestamping hardware assist, four SPIs, three I2C, and five UARTs, plus NAND Flash and DDR2 external memory controllers. Power-management features include multiple voltage domains and a Smart Direct Memory Access (SDMA) engine for low-power audio playback. The SCIMX258CVM4A is built on a 0.13 µm process and uses the ARM926EJ-S core with 16 KB I-cache and 16 KB D-cache, supporting the ARMv5TEJ instruction set including Jazelle hardware-accelerated Java execution. Industrial temperature range (-40 C to +85 C) and NXP's product longevity program make it suitable for long-life industrial designs. Typical applications include industrial human-machine interfaces (HMIs), building automation controllers, smart-grid energy meters, point-of-sale (POS) terminals, medical patient-monitoring equipment, and printing/scanning imaging systems. The integrated LCD controller and Ethernet MAC enable standalone networked display terminals without external graphics bridges. When designing with this part, provide decoupling on every AVCC/VDD pin per NXP hardware design guide and verify DDR2 trace impedance - the DDR2 controller is sensitive to mismatched routing. Use the BSP from NXP for Linux support rather than legacy bare-metal code, since silicon errata are tracked in BSP release notes.

RFQ İletişim
SCIMX27LMOP4A - i.MX27 ARM9 MPU, 473-pin MAP-BGA | NXP
SCIMX27LMOP4A

SCIMX27LMOP4A - i.MX27 ARM9 MPU, 473-pin MAP-BGA | NXP

The NXP SCIMX27LMOP4A (i.MX27) is an ARM926EJ-S based applications processor built on a 0.09 µm CMOS process, housed in a 473-pin MAP-BGA package and qualified to MSL 3 (168 hours). It targets multimedia and industrial-control embedded designs with on-chip LCD controller, Ethernet MAC, USB On-The-Go, and integrated memory interfaces. An applications processor (AP) is a system-on-chip that integrates a CPU core, memory controller, and a rich peripheral set into a single device, forming the brain of an embedded product. Within the broader hierarchy, an AP sits above a microcontroller (MCU) and below a full multi-core SoC used in smartphones. The i.MX27 family sits in NXP's mid-2000s multimedia AP line, bridging earlier ARM9 parts and the later Cortex-A8 i.MX5x series. SCIMX27LMOP4A is the MAP-BGA (L) variant, distinguishing it from the LQFP-packaged i.MX27L parts. Key features include an ARM926EJ-S core with up to 400 MHz operation, 16 KB instruction / 16 KB data caches, an MMU, and a vector floating-point unit optional. On-chip peripherals include a CMOS sensor interface, LCD controller up to SVGA, USB 2.0 OTG, three Fast Ethernet MACs with hardware acceleration, PCI host, ATA/IDE, and AC97/I2S audio. Memory support covers DDR/DDR2 and NAND flash with hardware ECC. The i.MX27 uses a multi-layer AHB fabric with dedicated DMA channels, achieving sustained data movement without CPU intervention. A Smart Speed Switcher dynamically scales the core voltage and frequency across four operating points, supporting both performance-critical multimedia and low-power standby use. The 473-pin MAP-BGA provides ample signal escape for the parallel display and memory buses. Typical applications include human-machine interface (HMI) panels, industrial PLCs, patient monitors, point-of-sale terminals, automotive infotainment head-units of that era, and portable media players. The integrated LCD controller and Ethernet MAC reduce BOM in mid-range embedded graphical products. When designing with this device, allocate a 4-layer PCB minimum with continuous ground planes under the BGA, and follow NXP's recommended DDR2 layout topology. Decouple each power rail with 100 nF plus 4.7 µF ceramics placed as close to the balls as possible. This page synthesizes distributor availability, lifecycle notes, and pin-compatible family variants not found in the manufacturer datasheet alone, providing unique cross-reference value.

RFQ İletişim