Mikrodenetleyiciler

Ürünler (19.000+)

STM8S001J3M3 - 16MHz 8-bit MCU, 8KB Flash, SOIC-8 | STMicroelectronics
STM8S001J3M3

STM8S001J3M3 - 16MHz 8-bit MCU, 8KB Flash, SOIC-8 | STMicroelectronics

The STMicroelectronics STM8S001J3M3 is a 16 MHz 8-bit STM8S microcontroller with 8 KB of Flash program memory, 128 bytes of true data EEPROM, and a 10-bit ADC, packaged in an 8-pin SOIC (SO-8/SO8N) outline. It is the lowest-pin-count member of the mainstream STM8S value line, offering the full STM8S peripheral set in a footprint as small as the ATtiny13/ATtiny85. According to the ST datasheet (DocID026881), the device integrates a Harvard-architecture 3-stage pipeline core, three timers, plus UART, SPI, and I2C communication interfaces, all in a tiny 8-pin package. A microcontroller (MCU) is an integrated circuit that combines a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), small non-volatile data storage (EEPROM), and a configurable set of digital and analog peripherals on a single silicon die. The STM8S family sits in the 8-bit MCU category, which traces up the hierarchy to microcontroller -> embedded processor -> semiconductor IC. The STM8S core uses an extended instruction set that is binary-compatible across the STM8S/STM8L families, making code portable to higher-pin-count siblings when the design grows. Key features include 8 KB Flash with in-application/in-circuit programming, 128 bytes of true byte-erasable EEPROM rated for 100 k cycles, 1 KB SRAM, 5 ADC channels with 10-bit resolution and up to 12-bit oversampling, a 16 MHz internal RC oscillator calibrated to ±1%, and a 1.8 V to 5.5 V supply range. The 8-pin SOIC exposes just enough I/O to drive a handful of switches, LEDs, sensors, or a serial link, and the integrated brown-out reset and watchdog timer simplify safety-critical designs. Two 16-bit timers and one 8-bit timer provide PWM, input capture, and output compare functions for motor, LED, and timing control. Architecturally, the STM8S001J3 is a derivative of the STM8S003F3 with the same silicon die repackaged into an 8-pin SOIC, dropping most GPIOs in favor of a tiny PCB footprint. The integrated voltage regulator lets the chip run from a single 1.8-5.5 V rail without external components. With an active-mode current in the single-digit mA range and multiple low-power modes down to a few microamps, it is well suited to battery-powered gadgets and always-on sensor nodes. Typical applications include low-cost sensor interface boards, replacement of ATtiny13/ATtiny85 designs, smart LED controllers, IR remote transmitters/receivers, simple motor and fan controllers, battery chargers, and hobby/educational platforms such as the STM8 eForth project. The wide operating temperature range (-40C to +125C) and 5 V tolerance on most pins also make it viable for industrial control front-ends. When designing with this device, note that only 6 of the 8 pins are usable as GPIO because NRST and power pins are mandatory. Use the SWIM debug interface for in-circuit programming and debugging, and place a 100 nF decoupling capacitor as close as possible to the VDD pin. Compare pinout carefully against ATtiny85 migration paths before re-using existing PCB layouts. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the ST datasheet, helping engineers quickly evaluate the STM8S001J3M3 for low-pin-count 8-bit designs.

RFQ İletişim
STM8S003F3P6 - 8-bit MCU 8KB Flash 16MHz TSSOP-20 | STMicroelectronics
STM8S003F3P6

STM8S003F3P6 - 8-bit MCU 8KB Flash 16MHz TSSOP-20 | STMicroelectronics

The STMicroelectronics STM8S003F3P6 is a value line 8-bit microcontroller based on the STM8 core, running at up to 16 MHz with 8 KB of Flash memory, 1 KB of RAM, and 128 bytes of true data EEPROM in a 20-pin TSSOP package. An 8-bit microcontroller (MCU) is a single-chip computer integrating an 8-bit CPU, program memory, data memory, and programmable peripherals. The STM8S003F3P6 belongs to the STM8S series within the STM8 family, positioned below the 32-bit STM32 series in STMicroelectronics' product hierarchy and targeting cost-sensitive embedded control. Key features include 8 KB Flash with integrated true EEPROM (up to 100,000 write/erase cycles), a 10-bit ADC with 5 channels, and UART, SPI, and I2C interfaces. The device operates from 2.95V to 5.5V, supporting both 3.3V and 5V systems, with 16 programmable I/Os and 7 timers/counters including a 16-bit timer, an 8-bit timer, and watchdog timers. The STM8 core uses a Harvard-architecture 3-stage pipeline delivering 16 MIPS at 16 MHz. An internal 16 MHz RC oscillator eliminates the need for an external crystal in many designs. Low-power modes include Halt, Active-Halt, and Wait, with 3.6 mA typical in Run mode at 16 MHz and about 1 uA in Halt mode. Typical applications include home appliances, industrial control, consumer electronics, motor control helpers, and sensor interfaces. Its wide voltage range and robust I/O make it popular in white goods, power tools, and battery-powered devices, while the integrated EEPROM removes external non-volatile memory from the BOM. Design tip: decouple VDD with a 100 nF capacitor placed close to the pin. The internal RC is accurate to approximately 2%, so use an external crystal when precise timing is required. SWIM single-wire in-circuit programming simplifies firmware updates. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes beyond the ST datasheet, as of 2026-08-29.

USD $0,36 İletişim
STM8S003F3P6TR - 8-bit MCU, 8KB Flash, 16MHz | STMicroelectronics
STM8S003F3P6TR

STM8S003F3P6TR - 8-bit MCU, 8KB Flash, 16MHz | STMicroelectronics

The STMicroelectronics STM8S003F3P6TR is an 8-bit microcontroller based on the STM8 core, offering 8KB of Flash memory, 1KB of RAM, and 640 bytes of EEPROM in a 20-pin TSSOP package. It operates at a maximum frequency of 16 MHz and supports a supply voltage range of 2.95V to 5.5V, making it suitable for a wide range of cost-sensitive embedded applications. Data verified as of 2026-08-05. An 8-bit microcontroller (MCU) is a compact integrated circuit that contains a processor core, memory, and programmable input/output peripherals on a single chip. The STM8 core is an 8-bit CISC architecture designed for high code density and efficient performance in low-cost applications. As a member of the STM8S series, this MCU sits within the broader hierarchy of microcontrollers, which are themselves a subset of embedded processors used in everything from consumer electronics to industrial control systems. Key features include 8KB of Flash program memory, 1KB of SRAM, and 640 bytes of true data EEPROM with write protection. The device integrates a 10-bit analog-to-digital converter (ADC) with up to 5 channels, a UART, SPI, and I2C interface, and a 16-bit timer with PWM capability. It also includes a watchdog timer, a clock security system, and a low-power mode to minimize energy consumption. The STM8S003F3P6TR is built on a robust 8-bit architecture with a 3-stage pipeline, enabling most instructions to execute in a single clock cycle. The device supports a wide operating temperature range from -40°C to +85°C, making it reliable for industrial environments. The TSSOP-20 package offers a compact footprint of 6.4mm x 4.4mm, ideal for space-constrained PCB designs. Typical applications include home appliances, small appliances, lighting control, power tools, and sensor interfaces. Its rich peripheral set and low cost make it a popular choice for high-volume consumer products where cost efficiency is paramount. When designing with this MCU, ensure proper decoupling of the VDD pin with a 100nF capacitor placed close to the device. The NRST pin should be connected to VDD through a 100nF capacitor and a pull-up resistor to prevent spurious resets. For programming, the SWIM interface requires a single-wire connection, simplifying in-circuit programming. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the ST datasheet, providing engineers with a comprehensive resource for evaluating the STM8S003F3P6TR.

RFQ İletişim
STM8S003K3T6 - 8-bit 16MHz MCU, 8KB Flash | STMicroelectronics
STM8S003K3T6

STM8S003K3T6 - 8-bit 16MHz MCU, 8KB Flash | STMicroelectronics

The STMicroelectronics STM8S003K3T6 is an 8-bit value-line STM8S microcontroller featuring a 16 MHz advanced STM8 core, 8 KB of Flash program memory and 128 bytes of true data EEPROM, housed in a 32-pin LQFP (7x7 mm) package. According to the manufacturer datasheet, the device integrates a 10-bit ADC, three general-purpose 16-bit timers, a UART, SPI and I2C communication interfaces, plus independent watchdog timers with separate clock source for safety-critical applications. The chip operates from 2.95 V to 5.5 V supply and is built on ST's state-of-the-art 130 nm embedded Flash process. A value-line microcontroller (often called an 8-bit MCU) is a small, low-cost processor optimised for embedded control tasks such as sensor reading, motor actuation, indicator driving, and user-interface handling. Within the broader semiconductor hierarchy, an MCU is a subset of microprocessors (MPU) and is differentiated by integrated Flash, RAM and peripherals on a single die. The STM8S003K3T6 occupies the entry-level value-line of the STM8S family, balancing die size, peripheral set and price for cost-sensitive designs where a 32-bit MCU is unnecessary. Key features that differentiate the STM8S003K3T6 in its class include 1 KB of RAM, the integrated 10-bit SAR ADC with up to 5 multiplexed channels, the clock security system (CSS) that detects external clock failure and switches to the internal RC oscillator, plus 100 k write/erase cycle endurance on the data EEPROM. Robust I/O design tolerates 5 V injection on adjacent pins, simplifying mixed-voltage interface to legacy 5 V peripherals. The 32-pin LQFP-32 (7x7) footprint provides easy hand-soldering and breadboard prototyping versus fine-pitch QFN options. Technically, the STM8S003K3T6 is engineered around the proprietary STM8 core with 16-bit index registers and a 20-bit program counter, executing most instructions in 1-2 clock cycles. The integrated voltage regulator and brown-out reset (BOR) circuitry protect the Flash against low-voltage write corruption. The 16 MHz system clock can be sourced from an external crystal, resonator, or the factory-trimmed internal 16 MHz RC oscillator with ±1 % accuracy across the full operating temperature range. Typical applications include low-cost consumer appliances (rice cookers, washing-machine user interfaces, induction cooktops), battery-powered sensor nodes, LED lighting controllers, simple BLDC/PMSM auxiliary motor drivers (fans, pumps), 5 V industrial control buttons, and Arduino-Nano-compatible hobbyist boards. The wide 2.95-5.5 V supply range and proven STM8 toolchain (STVD, IAR, Cosmic, SDCC) make it a frequent second source for legacy 8051 designs requiring a software refresh. When designing with the STM8S003K3T6, choose between the internal 16 MHz RC oscillator (saves BOM cost) and an external crystal (better UART baud-rate accuracy). Decouple VDD/VSS with 100 nF ceramic capacitors placed within 3 mm of each supply pin, and reserve the SWIM pin (single-wire debug) for in-circuit programming. For noisy environments, enable the CSS and the window watchdog for IEC 60730 class B compliance. This page synthesizes distributor pricing, drop-in alternatives and practical design notes not found in the manufacturer datasheet, and is intended as a faster reference than the 31-page ST datasheet for engineers evaluating the part for production.

RFQ İletişim
STM8S005C6T6 - 8-bit MCU, 32KB Flash, 16MHz | STMicroelectronics
STM8S005C6T6

STM8S005C6T6 - 8-bit MCU, 32KB Flash, 16MHz | STMicroelectronics

The STM8S005C6T6 is an 8-bit microcontroller from STMicroelectronics' STM8S value line, featuring a 16 MHz STM8 core, 32 Kbytes of Flash program memory, and 128 bytes of data EEPROM. It is housed in a 48-pin LQFP (7x7 mm) package, offering a compact footprint for space-constrained embedded applications. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, integrating a processor core, memory, and programmable peripherals. The STM8S005C6T6 belongs to the STM8S family, which is part of the broader STM8 8-bit MCU category, positioned below 32-bit ARM Cortex-M devices in the microcontroller hierarchy. It provides a cost-effective solution for applications requiring moderate processing power and rich peripheral integration without the complexity of 32-bit architectures. Key features include a 16 MHz CPU clock, 32 KB Flash, 2 KB RAM, 128 bytes EEPROM, and a comprehensive set of peripherals: 10-bit ADC, UART, SPI, I2C, timers, and up to 38 I/O pins. The device operates from a 2.95V to 5.5V supply, making it suitable for both 3.3V and 5V systems. Its robust ESD protection and wide operating temperature range (-40°C to +85°C) enhance reliability in industrial environments. The STM8S005C6T6 is built on ST's proprietary STM8 core, which delivers up to 20 MIPS at 16 MHz, providing efficient code execution for control-oriented tasks. The integrated EEPROM allows data storage without external components, simplifying BOM and reducing system cost. The device supports in-circuit programming and debugging via SWIM interface, enabling rapid firmware development. Typical applications include home appliances, industrial control, sensor interfaces, and consumer electronics. Its 5V-tolerant I/Os and rich peripheral set make it ideal for motor control, lighting, and power management systems. The wide voltage range and low power consumption support battery-powered devices. When designing with this MCU, ensure proper decoupling of the VDD pins with 100nF capacitors and a bulk capacitor. The SWIM pin should be pulled high for programming. For EMC-sensitive designs, follow ST's layout guidelines for the LQFP package to minimize noise coupling.

RFQ İletişim
STM8S007C8T6 - 8-Bit MCU, 64KB Flash, 24MHz | STMicroelectronics
STM8S007C8T6

STM8S007C8T6 - 8-Bit MCU, 64KB Flash, 24MHz | STMicroelectronics

The STM8S007C8T6 is an 8-bit microcontroller from STMicroelectronics' STM8S Value Line family, featuring a 24MHz advanced STM8 core with Harvard architecture and a 3-stage pipeline. It comes in a 48-pin LQFP package and offers 64KB of Flash memory, 6KB of RAM, and true data EEPROM. With 38 programmable I/O lines, 9 timers/counters, and interfaces including I2C, SPI, and 2 UARTs, this MCU is designed for cost-sensitive embedded applications requiring robust performance and low power consumption. An 8-bit microcontroller is a single-chip computer with an 8-bit central processing unit (CPU), memory, and programmable input/output peripherals. It is a type of embedded microcontroller, which is a compact integrated circuit designed to govern a specific operation in an embedded system. The STM8S007C8T6 belongs to the STM8 family, which is a line of 8-bit microcontrollers from STMicroelectronics, positioned between low-end 8-bit MCUs and higher-performance 32-bit ARM Cortex-M devices. Its Harvard architecture separates instruction and data buses, enabling simultaneous access and faster execution, while the 3-stage pipeline increases throughput at a given clock frequency. Key features of the STM8S007C8T6 include a maximum CPU frequency of 24MHz with 0 wait states at 16MHz, 64KB of Flash memory, 6KB of RAM, and true data EEPROM for non-volatile data storage. It integrates a 10-bit ADC, multiple timers, and communication interfaces (I2C, SPI, 2 UARTs), making it versatile for various control and monitoring tasks. The device operates over a temperature range of -40°C to 85°C and has a maximum power dissipation of 443mW, suitable for industrial and consumer environments. Technically, the STM8 core is an advanced 8-bit architecture with a 3-stage pipeline, allowing most instructions to execute in a single clock cycle. The 24MHz clock speed provides up to 24 MIPS throughput, which is competitive for 8-bit MCUs. The Flash memory supports in-application programming (IAP) and in-circuit programming (ICP), enabling firmware updates in the field. The true data EEPROM allows for byte-level read/write operations, useful for storing calibration data or system parameters without external memory. Typical applications include home appliances, industrial control, sensor interfacing, and automotive body electronics. The rich peripheral set and 38 I/O lines make it suitable for motor control, lighting systems, and human-machine interfaces. Its low power consumption and wide operating voltage range (typically 2.95V to 5.5V) support battery-powered devices and 5V logic systems. When designing with this MCU, consider the power supply decoupling and crystal oscillator layout. Use a 0.1uF capacitor close to each VDD pin and a 10uF bulk capacitor. For the external crystal, place it near the OSC pins with proper load capacitors as specified in the datasheet. Ensure the reset pin has a pull-up resistor and a capacitor for reliable power-on reset.

RFQ İletişim
STM8S103F2M6 - 8-Bit 16MHz 4KB MCU | STMicroelectronics
STM8S103F2M6

STM8S103F2M6 - 8-Bit 16MHz 4KB MCU | STMicroelectronics

The STMicroelectronics STM8S103F2M6 is an 8-bit STM8S access-line microcontroller operating up to 16 MHz, with 4 KB of Flash memory and 1 KB of RAM in a 20-pin SOIC package. The verified distributor listing identifies a 2.95 V to 5.5 V supply range, 16 I/O ports, integrated data EEPROM, a 10-bit ADC, three timers, UART, SPI, and I2C. It is intended for compact embedded-control designs that need a capable peripheral set without the complexity of a 32-bit MCU. An 8-bit microcontroller is a compact embedded-processing device optimized for control logic, sensing, communication, and actuator management. Within the STM8S family hierarchy, this device combines an 8-bit core, Flash program memory, RAM, and on-chip peripherals in one package. The STM8S103F2M6 is suitable for low-cost, low-power industrial, consumer, appliance, instrumentation, and embedded control systems where deterministic I/O and peripheral integration are more important than high arithmetic throughput. The headline features are a 16 MHz maximum CPU frequency, 4 KB Flash, 1 KB RAM, 16 I/O ports, and integrated EEPROM. Its 10-bit ADC enables analog measurement from basic sensors, while the three timers support timing, PWM, and periodic control functions. UART, SPI, and I2C interfaces provide flexible connectivity to sensors, displays, transceivers, memories, and other microcontrollers. The 20-pin SOIC package is suitable for conventional surface-mount assembly and hand-soldered prototypes. The STMicroelectronics datasheet describes the STM8S103F2 family as an access-line MCU family with up to 8 KB Flash across family variants. For the specific STM8S103F2M6 ordering code, the verified distributor results specify 4 KB Flash and a 16 MHz CPU. This distinction matters because related family members may have different memory capacities, pin counts, or package options. Firmware and PCB decisions should therefore use the exact ordering code rather than relying only on the STM8S103F2 family name. Typical applications include small motor or relay controllers, temperature and light monitoring, keypad interfaces, LED indicators, low-cost measurement instruments, communication modules, and compact household or industrial automation nodes. The ADC and communication peripherals allow a single device to acquire sensor data and connect it to a host system. For designs requiring higher processing performance or larger memory, a 32-bit MCU may be preferable, while this device is optimized for economical embedded-control tasks. When designing, verify the exact pin assignments, alternate-function selection, clock configuration, ADC input availability, and peripheral instance mapping from the STMicroelectronics datasheet. Place decoupling capacitors close to the supply pins and keep high-current or switching nodes away from sensitive analog inputs. Program the device with a compatible STM8 toolchain and validate startup, reset, clock, and watchdog behavior on the final PCB. This page synthesizes the verified manufacturer and distributor information, package details, application guidance, and engineering considerations for engineers evaluating the STM8S103F2M6. It emphasizes exact-ordering-code verification rather than assuming every STM8S103F2 family variant has identical resources.

RFQ İletişim
STM8S103F2P3 - 16MHz 8-Bit MCU, 4KB Flash | STMicroelectronics
STM8S103F2P3

STM8S103F2P3 - 16MHz 8-Bit MCU, 4KB Flash | STMicroelectronics

The STMicroelectronics STM8S103F2P3 is an 8-bit STM8S access-line microcontroller operating at up to 16 MHz, with 4 KB of Flash program memory and integrated data EEPROM, housed in a 20-pin TSSOP package. The verified distributor listings identify a 2.95 V to 5.5 V supply range, 16 I/O ports, a 10-bit ADC, three timers, UART, SPI, and I2C. Its small package and low-voltage operation make it suitable for compact embedded controls, sensor nodes, and simple industrial products. What is an 8-bit microcontroller? An 8-bit MCU is a programmable integrated circuit that executes instructions using an 8-bit data bus. In the embedded-control hierarchy, the STM8S103F2P3 belongs to the STM8S MCU family, which combines a CPU core, Flash program memory, data EEPROM, peripherals, and GPIO in one low-power device. It is intended for applications that need deterministic control and multiple serial interfaces without the resource demand of a higher-bit MCU. The STM8S103F2P3 is listed by STMicroelectronics as part of the STM8S103F2/x3 access line. The verified specifications show 4 KB of Flash for the STM8S103F2P3 ordering code, while the related STM8S103F2 family also includes variants with larger memory. The device provides a 16 MHz clock, a 10-bit ADC, three timers, UART, SPI, and I2C, making it a broad platform for embedded sensing, communications, and actuator-control designs. The 20-pin TSSOP package helps reduce PCB area compared with larger leaded packages. With 16 I/O ports, the device can connect digital inputs, outputs, and serial peripherals while leaving the remaining pins for power, clock, reset, and programming functions. The 2.95 V to 5.5 V operating range supports common embedded supply systems, although the final design should verify every electrical limit against the manufacturer datasheet. Typical applications include small sensor nodes, digital control boards, temperature or analog-signal monitoring, simple communication bridges, LED and relay-control systems, and compact access-line embedded products. The UART, SPI, and I2C peripherals allow the MCU to interface with sensors, transceivers, memories, displays, and actuators without requiring a separate interface controller. For a new design, verify the exact pinout, alternate-function assignments, clock configuration, and reset behavior before layout. The verified web data does not provide a complete pin-by-pin mapping, pricing, lead time, or all electrical timing values, so those fields are marked as unavailable rather than inferred.

RFQ İletişim
STM8S103F2P6 - 16MHz 8-Bit 4KB MCU | STMicroelectronics
STM8S103F2P6

STM8S103F2P6 - 16MHz 8-Bit 4KB MCU | STMicroelectronics

The STMicroelectronics STM8S103F2P6 is a 16 MHz 8-bit microcontroller with 4 KB of Flash program memory in a 20-pin TSSOP package. It belongs to the STM8S103 access line and integrates a 10-bit ADC, three timers, UART, SPI, and I2C interfaces. These characteristics make it suitable for compact embedded control, sensing, communications, and actuator-control systems requiring an economical general-purpose MCU. An 8-bit microcontroller is a semiconductor that executes instructions and processes sensor, control, and communications data using an 8-bit data path. The STM8S family combines a microcontroller, memory, and peripherals in one integrated circuit. Within the product hierarchy, the STM8S103F2P6 is an 8-bit MCU, an embedded controller, and a semiconductor intended for low-cost, compact electronic systems. The principal features include a 16 MHz operating frequency, 4 KB of Flash memory, a 10-bit analog-to-digital converter, three timers, and support for UART, SPI, and I2C serial communication. The 20-TSSOP surface-mount package also supports space-constrained PCB layouts. Together, these resources allow a design to combine analog measurement, periodic timing, digital control, and peripheral communication without requiring a separate ADC or communications transceiver. The STM8S103F2 uses the advanced STM8 core with Harvard architecture and a three-stage pipeline, as identified in the manufacturer datasheet search result. Its Harvard architecture separates instruction and data access paths, while the three-stage pipeline supports efficient sequential execution. Integrated data EEPROM is listed as a family feature by STMicroelectronics, although the exact EEPROM size for this orderable MPN is not present in the supplied verified data. Typical applications include industrial sensor modules, compact motor and relay controllers, digital thermometers, appliance interfaces, low-cost serial bridges, LED-control boards, and compact instrumentation. The ADC supports analog input acquisition, while UART, SPI, and I2C provide paths for external sensors, displays, memory devices, and system controllers. The three timers support periodic events, timing bases, and basic control functions. A key design consideration is verifying the exact pin multiplexing and peripheral assignments for the selected 20-TSSOP footprint in the manufacturer pinout and datasheet. Designers should also confirm memory requirements, clock configuration, ADC accuracy needs, and communication-voltage levels before committing the part to a new PCB. A complete 20-pin pinout was not included in the supplied verified excerpts and is therefore not reproduced here. This page combines verified distributor identification, manufacturer feature information, package details, application guidance, and honest cross-reference analysis. It also distinguishes verified drop-in candidates from functional alternatives so procurement and engineering teams can evaluate interchangeability without relying on incomplete distributor metadata.

RFQ İletişim
STM8S103F3M6 - 16MHz 8KB 8-Bit MCU | STMicroelectronics
STM8S103F3M6

STM8S103F3M6 - 16MHz 8KB 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8S103F3M6 is an 8-bit STM8S access-line microcontroller operating up to 16 MHz, with 8 KB of Flash program memory and a 20-pin SOIC package. The verified product information identifies a 2.95 V to 5.5 V supply range, 16 I/O ports, integrated true data EEPROM, and an 8 KB Flash organization of 8K × 8. Its lifecycle status is active. A microcontroller is a programmable semiconductor device that integrates a processor core, memory, and peripherals into one compact component. In the device hierarchy, the STM8S103F3 belongs to the STM8S 8-bit MCU family, a cost-conscious platform for embedded control. The STM8S103F3M6 is intended for products that need deterministic low-complexity control, local sensing, actuator output, and communication without adopting a higher-cost 32-bit MCU. The principal verified features include a 16 MHz clock, 8 KB Flash memory, true EEPROM, 16 I/O ports, and operation across a 2.95 V to 5.5 V supply range. The true data EEPROM is useful when persistent parameters must be retained outside the program Flash. Sixteen I/O ports give a compact design multiple digital connection points, while the 20-pin SOIC package supports conventional surface-mount assembly. The access-line positioning emphasizes general embedded utility rather than automotive qualification or extreme-performance processing. The STM8S architecture is suited to small control loops, keypad interfaces, indicator logic, sensor conditioning, and communication modules. Because only Flash memory and clock speed were explicitly quantified in the supplied verified results, detailed RAM, peripheral, timer, and electrical limits should be confirmed in the manufacturer documentation before design release. Firmware migration also requires reviewing the applicable STM8S103F3 device datasheet, reference manual, startup files, linker configuration, and toolchain settings. Typical applications include building controls, compact industrial interfaces, appliance controllers, instrumentation, and low-power sensor nodes. At 16 MHz, the MCU can service multiple time-sensitive I/O tasks while keeping the design centered on an economical 8-bit processor. Its 8 KB Flash capacity also makes it most appropriate for applications with modest code requirements and simple update behavior. Designers should confirm every peripheral assignment, alternate-function mapping, pin type, and electrical limit from the official STM8S103F3M6 documentation before PCB release. Decoupling, clock stability, programming access, and exposed-pin assignments must follow the manufacturer recommendations. This page combines verified distributor and manufacturer information with procurement context and engineering guidance rather than filling missing technical details with assumptions. The information below synthesizes official product positioning, distributor listings, verified pricing evidence, and application-specific design considerations. Missing RAM, timer, peripheral, and package details are intentionally marked for verification, preventing unsupported claims from entering a new design.

RFQ İletişim
STM8S103F3P3 - 16MHz 8-Bit MCU, 8KB Flash | STMicroelectronics
STM8S103F3P3

STM8S103F3P3 - 16MHz 8-Bit MCU, 8KB Flash | STMicroelectronics

The STMicroelectronics STM8S103F3P3 is an access-line, 8-bit STM8S microcontroller rated up to 16 MHz, with 8 Kbytes of Flash program memory, integrated true data EEPROM, and a 20-TSSOP package. It combines a 10-bit ADC, three timers, UART, SPI, and I2C interfaces in a compact surface-mount package suitable for cost-sensitive embedded control systems. The device operates from a 3.3 V or 5 V supply according to the verified distributor specifications. An STM8S microcontroller belongs to the 8-bit embedded-microcontroller hierarchy, where an MCU integrates a CPU core, program memory, data memory, peripherals, and interface logic on one semiconductor die. The STM8S103F3 access line is positioned for compact embedded applications where a modest processing rate, useful analog measurement, and multiple serial interfaces are more important than high-bandwidth computation. Its integrated true data EEPROM also allows frequently changed calibration or configuration data to be stored separately from program Flash. Three principal characteristics define this device: a maximum 16 MHz operating frequency, up to 8 Kbytes of Flash program memory, and a 10-bit ADC. The STM8S103F3P3 additionally provides three timers and UART, SPI, and I2C serial interfaces. These resources allow a design to measure analog inputs, control timing-dependent outputs, and communicate with sensors, transceivers, displays, or external nonvolatile memories without requiring several separate interface devices. The STM8S103F3P3 uses STMicroelectronics' STM8 8-bit architecture and is associated with the STM8S103F2/x3 access-line family. At 16 MHz, the device provides substantially more timing headroom than an 8 MHz-class MCU while retaining the straightforward programming model and integrated peripherals expected from an entry-level 8-bit platform. The available verified information does not specify RAM size, ADC resolution details beyond 10-bit capability, or individual peripheral timing ratings, so those details should be confirmed in the manufacturer datasheet before timing-critical design work. Typical uses include compact industrial controllers, appliance control boards, sensor acquisition modules, motor or actuator controllers, communication gateways, and low-cost consumer products. The three timers support periodic control and timing functions, the 10-bit ADC supports analog sensing, and UART, SPI, and I2C cover common embedded communication requirements. The 20-TSSOP package is particularly useful where a through-hole footprint is unnecessary but a fine-pitch surface-mount assembly is available. PCB implementation requires careful decoupling of each supply pin and a low-impedance connection between the MCU and its crystal or clock source when an external resonator is used. Firmware must preserve the device-specific reset, boot, and oscillator options, and peripheral inputs must remain within the electrical limits published by STMicroelectronics. Because the verified distributor result explicitly describes the STM8S103F3P3 as packed in a tube, procurement should use the manufacturer ordering information to confirm the shipping quantity and marking treatment. This page combines the verified STMicroelectronics family information with distributor pricing, package details, selection guidance, and practical design considerations. It distinguishes confirmed capabilities from parameters that still require datasheet verification, helping engineers identify the STM8S103F3P3 for compact, mixed-signal embedded-control designs without treating unverified electrical details as guaranteed specifications.

RFQ İletişim
STM8S103F3P6 - 8-bit 16MHz MCU, 8KB Flash, 20-TSSOP | STMicroelectronics
STM8S103F3P6

STM8S103F3P6 - 8-bit 16MHz MCU, 8KB Flash, 20-TSSOP | STMicroelectronics

The STMicroelectronics STM8S103F3P6 is an access-line 8-bit microcontroller from the STM8S family, featuring a 16 MHz STM8 core, 8 KB of Flash program memory, and an integrated true data EEPROM, housed in a 20-pin TSSOP package. The device delivers 1 Kbyte of SRAM, a 10-bit ADC, three 16-bit timers, plus UART, SPI, and I²C communication interfaces, with 16 programmable I/O pins for general-purpose use. Operating from a 2.95 V to 5.5 V supply, the STM8S103F3P6 provides a balance of small footprint, low power, and rich peripherals for cost-sensitive embedded designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripheral interfaces. The STM8 core uses an advanced Harvard architecture with a 16-bit instruction word and 32-bit program counter extension for efficient code density. The "Access line" designation indicates this part targets cost-optimized designs with sufficient peripherals for general control tasks. This positions the STM8S103F3P6 within the broader taxonomy: MCU -> 8-bit microcontroller -> STM8 family -> STM8S access line -> STMicroelectronics 8-bit portfolio. Key features include 8 KB Flash with in-application programming (I2AP) capability, 640-byte true data EEPROM rated for 300 k write/erase cycles, a 10-bit ADC with up to 5 channels, and a 4-channel 16-bit PWM/timer structure supporting capture, compare, and one-pulse modes. The integrated SWIM debug interface and on-chip watchdog with window option simplify development and field reliability. The 20-pin TSSOP package offers a compact 6.5 mm × 4.4 mm footprint suitable for space-constrained PCBs. Typical applications include low-cost consumer appliances, sensor interface nodes, LED lighting controllers, battery chargers, simple motor drivers, and replacement of legacy 8051 or PIC16 designs. The wide 2.95-5.5 V supply range also supports 3.3 V and 5 V industrial systems without level shifters. Designers should note that the STM8S103F3P6 (industrial grade, -40 °C to 85 °C) and the STM8S003F3P6 differ in feature set; the '103 part includes a beeper and AWU peripherals absent on the '003. For higher memory needs, the STM8S105 series provides 32 KB Flash in larger packages. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet alone.

RFQ İletişim
STM8S103K3U6 - 16MHz 8-Bit MCU with 8KB Flash | STMicroelectronics
STM8S103K3U6

STM8S103K3U6 - 16MHz 8-Bit MCU with 8KB Flash | STMicroelectronics

The STMicroelectronics STM8S103K3U6 is an access-line 8-bit STM8S microcontroller operating up to 16 MHz, with 8 KB of Flash program memory and 16 I/O ports, packaged in a 32-pin UFQFPN. It operates from 2.95 V to 5.5 V and integrates a 10-bit ADC, three timers, UART, SPI, and I²C. This combination makes it suitable for compact embedded control, sensor acquisition, communication, and low-cost automation systems where an 8-bit architecture, peripheral integration, and a small surface-mount footprint are useful. What is an 8-bit microcontroller? An 8-bit microcontroller is a compact embedded-processing device whose central processing unit, registers, data paths, and instruction handling are organized around eight-bit values. Within the broader semiconductor hierarchy, the STM8S103K3U6 is an MCU, then an embedded controller, then a general-purpose semiconductor used in control and communication products. The STM8S family combines program memory, RAM, data EEPROM, timers, serial interfaces, and analog conversion on one device. The part provides 8 Kbytes of Flash program memory, 1 Kbyte of RAM as identified in the retrieved comparison data, and 640 bytes of true data EEPROM with 300 kcycles endurance. Its 16 MHz clock supports responsive control loops, while the 10-bit ADC enables measurements from analog sensors. The integrated UART, SPI, and I²C interfaces support external transceivers, memory, sensors, displays, and other digital peripherals without requiring separate interface controllers. The STM8S103K3U6 is identified in the verified listing as a 32-pin UFQFPN device with an exposed pad and a 5 x 5 mm package description. The exposed pad and compact land pattern are important layout considerations because they influence thermal spreading, soldering, and assembly requirements. The device uses surface-mount construction, and the supplied search data identifies an operating supply range of 2.95 V to 5.5 V, allowing operation from either regulated 3.3 V or 5 V systems. Typical applications include low-cost sensor nodes, small motor or actuator controllers, communication modules, industrial control panels, instrument interfaces, and compact consumer products. The ADC and serial interfaces make it practical for designs that acquire analog values and transmit or store measurements. Firmware selection must match the STM8S device family, and board-level validation should include power sequencing, peripheral pin multiplexing, clock configuration, ADC calibration behavior, and exposed-pad thermal design. For a new design, choose the STM8S103K3U6 when 8 KB of Flash, 1 KB of RAM, a 16 MHz maximum clock, and integrated mixed-signal and serial peripherals are sufficient. It is not automatically interchangeable with a different STM8 device merely because the family name is similar; verify package pinout, memory size, voltage limits, peripheral assignments, and firmware support. This page combines verified distributor and manufacturer information with sourcing guidance, design cautions, and structured technical context.

RFQ İletişim
STM8S105C4T3 - 16MHz 16KB Flash 8-Bit MCU | STMicroelectronics
STM8S105C4T3

STM8S105C4T3 - 16MHz 16KB Flash 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8S105C4T3 is an 8-bit access-line microcontroller with a 16 MHz maximum clock, 16 KB of Flash program memory, 2 KB of RAM, and 38 I/O pins in a 48-LQFP 7 x 7 mm package. It belongs to the STM8S medium-density access-line family and is intended for compact embedded-control systems that require reliable digital control, communication, and mixed-signal peripheral support without the cost and complexity of a 32-bit MCU. What is an 8-bit access-line microcontroller? An 8-bit MCU is a microcontroller whose primary processing and data path is optimized for 8-bit values. The STM8S105C4T3 combines that architecture with Flash memory, static RAM, embedded EEPROM, timers, serial interfaces, analog conversion, and GPIO in one device. Within the broader hierarchy of MCU, embedded processor, and semiconductor, it sits between simple 8-bit controllers and more capable 32-bit Cortex-M microcontrollers, providing a useful balance of performance, memory, peripheral integration, and design complexity. The STM8S105x4/6 access-line family provides from 16 KB to 32 KB of Flash program memory and integrated true data EEPROM, according to the STMicroelectronics product-page search result. The C4T3 ordering identifies a device with 16 KB of Flash in the STM8S105C4 configuration and the 48-LQFP package. The 16 MHz operating speed is suitable for motor-control peripherals, communications, consumer accessories, industrial controllers, and embedded products that do not require a high-performance 32-bit core. The 38 available I/O pins make the 48-LQFP package useful when a design needs multiple control and monitoring signals while preserving a modest footprint. Available resources described by the verified data include 2 KB of RAM, integrated EEPROM, and the STM8S105xx access-line feature set. Detailed clock-tree options, ADC characteristics, timer resolutions, supply limits, and package thermal parameters were not included in the supplied search records and therefore require confirmation from the official manufacturer datasheet before design release. Typical applications include small motor controllers, sensor-hub boards, communication modules, panel interfaces, appliance controls, and compact industrial automation products. The 16 MHz core and 16 KB Flash are particularly useful for control loops and protocol state machines, while the 38 I/O pins simplify peripheral connection compared with smaller packages. Designers should confirm the complete 48-pin assignment, oscillator requirements, reset behavior, peripheral pin multiplexing, and electrical limits from the official STM8S105 datasheet. PCB layouts should preserve decoupling and exposed-pad thermal requirements where applicable, and firmware must account for alternate-function reassignment when using the numerous I/O pins. This product page consolidates the verified manufacturer and distributor facts, distinguishes the standard T3 ordering from the available T3TR reel variant, and clearly flags technical details that still need datasheet confirmation for engineering use.

RFQ İletişim
STM8S105C4T6 - 16MHz 8-Bit MCU with 16KB Flash | STMicroelectronics
STM8S105C4T6

STM8S105C4T6 - 16MHz 8-Bit MCU with 16KB Flash | STMicroelectronics

The STMicroelectronics STM8S105C4T6 is an 8-bit access-line microcontroller with a 16 MHz clock, 16 KB of Flash program memory, 2 KB of RAM, and a 48-pin LQFP package. It integrates a 10-bit ADC, true data EEPROM, timers, UART, SPI, and I2C peripherals, while operating from 2.95 V to 5.5 V. The device provides 38 I/O ports for embedded-control designs that need substantial peripheral connectivity without adopting a larger Cortex-M-class MCU. An 8-bit microcontroller is a compact embedded-processing category optimized for control tasks, sensor reading, actuator control, and communication bridging. The STM8S105 belongs to the STM8 access-line hierarchy, combining an 8-bit core with integrated memory and mixed-signal peripherals. Compared with a 32-bit microcontroller, its architecture generally emphasizes lower complexity and efficient deterministic control rather than high-bandwidth computation, making it suitable for cost-sensitive and space-constrained products. Key features include 16 KB of Flash, 2 KB of RAM, a 16 MHz maximum clock, and a 10-bit ADC. Integrated true data EEPROM allows frequently changed parameters to be stored without consuming all program Flash. The peripheral set includes UART, SPI, and I2C interfaces, supporting serial sensors, external memories, displays, and industrial peripherals. The 48-pin LQFP package provides 38 I/O ports and is suitable for automated PCB assembly and prototype-to-production migration. The STM8S105 access-line architecture is designed for embedded control applications requiring mixed analog and digital functions. Its 10-bit ADC supports measurements from switches, resistive sensors, and analog control loops, while the serial interfaces reduce external communication-controller requirements. The 2.95 V to 5.5 V supply range accommodates both 3.3 V and 5 V system rails, although the selected external components and operating limits must follow the manufacturer datasheet. Typical uses include industrial control modules, compact sensor nodes, appliance controllers, building equipment, communication transceivers, and embedded data-acquisition units. The combination of 38 I/O ports, three named serial interface types, timers, and an ADC allows one device to supervise multiple discrete and digital functions while keeping the bill of materials compact. Designers should preserve the exposed-pad and thermal-layout requirements applicable to the LQFP package, place decoupling capacitors close to the supply pins, and verify unused-pin termination against the datasheet. Firmware replacement is not automatically safe across MCU models because bootloader addresses, peripheral behavior, and interrupt-vector layouts must be checked even when the package dimensions match. This page consolidates verified manufacturer and distributor information, package and interface details, sourcing links, and replacement guidance for engineers evaluating the STM8S105C4T6. It also distinguishes confirmed electrical differences from compatibility assumptions, helping PCB, firmware, and procurement teams make a controlled decision.

RFQ İletişim
STM8S105C6T3 - 16MHz 32KB 8-Bit MCU | STMicroelectronics
STM8S105C6T3

STM8S105C6T3 - 16MHz 32KB 8-Bit MCU | STMicroelectronics

STMicroelectronics STM8S105C6T3 is an 8-bit STM8S access-line microcontroller with a 16 MHz clock, 32 KB of Flash program memory, integrated true data EEPROM, and 38 I/O ports in a 48-LQFP 7 x 7 mm package. It operates from a 2.95 V to 5.5 V supply and is suited to compact embedded-control systems that require mixed analog, digital, and communications peripherals. An 8-bit microcontroller is a compact computing platform that integrates a CPU core, program memory, data memory, and peripherals into one device. The STM8S family belongs to the broader hierarchy of microcontrollers, embedded processors, and semiconductors. Its CISC architecture provides byte-oriented instruction handling and a relatively small hardware footprint, making it useful for cost-sensitive appliances, industrial controls, sensor nodes, and communication equipment. Key features include 32 KB of Flash program memory, 2 KB of SRAM, a 10-bit ADC, UART, SPI, and I2C interfaces, and a maximum clock frequency of 16 MHz. The STM8S105xx access line also incorporates integrated true data EEPROM, allowing nonvolatile parameter retention without occupying the main Flash program area. A 48-LQFP package provides 38 I/O pins, offering substantial connectivity for displays, sensors, actuators, and external communication devices. The device is manufactured using STMicroelectronics proprietary 130 nm embedded non-volatile memory technology. This implementation combines an 8-bit core with a state-of-the-art peripheral set while retaining a conventional 2.95 V to 5.5 V operating range. The 10-bit ADC supports analog measurement tasks, while UART, SPI, and I2C provide paths for external data acquisition, sensor connectivity, and communication with transducers or companion controllers. Typical applications include compact motor and valve controllers, building and industrial automation modules, small sensor interfaces, appliance control boards, and low-cost communication peripherals. Designers can use the 38 available I/O ports for digital interfaces and the ADC for analog inputs, reducing the need for separate expansion components in moderately connected systems. A critical design consideration is the STM8S105C6T3's temperature-grade and order-code designation. The suffix T3 must be checked against the required ambient-temperature range before production release. PCB design should also preserve the package pin arrangement and provide suitable bypass capacitance near the power pins. This page combines verified manufacturer and distributor information, package characteristics, commercially available pricing, drop-in alternatives, comparison data, and practical engineering guidance to support component selection, PCB design, sourcing, and procurement decisions.

RFQ İletişim
STM8S105C6T6 - 8-bit MCU, 16MHz, 32KB Flash | STMicroelectronics
STM8S105C6T6

STM8S105C6T6 - 8-bit MCU, 16MHz, 32KB Flash | STMicroelectronics

The STM8S105C6T6 is an 8-bit microcontroller from STMicroelectronics' STM8S access line, featuring a 16 MHz advanced STM8 core with Harvard architecture and a 3-stage pipeline. It offers 32 KB of Flash program memory, 2 KB of RAM, and 1 KB of true data EEPROM, making it a cost-effective solution for a wide range of embedded control applications. The device is housed in a 48-pin LQFP package (7x7 mm) and operates over a supply voltage range of 2.95V to 5.5V, with an operating temperature range of -40°C to +85°C. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, integrating a processor core, memory, and programmable input/output peripherals. The STM8S105C6T6 belongs to the STM8S family, which is part of the broader STM8 microcontroller series, positioned below the 32-bit STM32 family in STMicroelectronics' product hierarchy. It is designed for applications requiring moderate processing power, low power consumption, and rich peripheral integration, such as industrial control, home appliances, and automotive body electronics. Key features include a 10-bit analog-to-digital converter (ADC) with up to 10 channels, multiple 16-bit timers, and a full set of communication interfaces: UART, SPI, and I2C. The device also integrates a true data EEPROM with up to 300,000 write/erase cycles, enabling data storage without external memory. The STM8 core operates at up to 16 MHz, delivering 16 MIPS throughput, and supports a wide range of clock sources including internal RC oscillators and external crystals. The STM8S105C6T6 is built on a high-density Flash technology, providing robust program memory endurance and fast programming. The architecture includes a nested interrupt controller with 28 interrupt vectors, enhancing real-time responsiveness. The device also features a low-power mode with typical current consumption of 5 µA in Halt mode, making it suitable for battery-powered applications. Typical applications include industrial automation, home appliances (e.g., washing machines, air conditioners), power tools, and automotive body control modules. The rich peripheral set and 5V-tolerant I/Os allow direct interfacing with sensors, relays, and displays without level shifting. The LQFP-48 package provides 38 I/O pins, offering ample connectivity for control and communication. When designing with this MCU, ensure proper decoupling of the VDD and VDDA pins with 100 nF capacitors placed close to the device. The NRST pin should be connected to a 100 nF capacitor to ground for reliable reset. For applications requiring precise timing, use an external crystal oscillator with load capacitors as specified in the datasheet.

RFQ İletişim
STM8S105K4B6 8-Bit 16MHz MCU 16KB Flash | STMicroelectronics
STM8S105K4B6

STM8S105K4B6 8-Bit 16MHz MCU 16KB Flash | STMicroelectronics

The STMicroelectronics STM8S105K4B6 is an 8-bit STM8S series microcontroller operating at 16 MHz, with 16 KB of Flash program memory and 2 KB of RAM, housed in a 32-pin SDIP package. It belongs to the STM8S105x4/6 access-line family, which combines integrated data EEPROM, a 10-bit ADC, timers, UART, SPI, and I2C in an 8-bit embedded-control device. What is an 8-bit microcontroller? An 8-bit MCU is a compact embedded processor whose internal bus and arithmetic operations are organized around eight-bit data. STM8 devices sit within the broader semiconductor and microcontroller hierarchy and are commonly used for cost-sensitive control, sensing, communications, and actuator-control systems. The STM8S105K4B6 provides enough Flash and RAM for compact embedded applications without requiring a higher-complexity processor. Key features include an 8-bit architecture, 16 MHz maximum clocking, 16 KB Flash, 2 KB RAM, and 25 I/O according to the verified distributor specifications. The device also includes a 10-bit ADC, UART, SPI, I2C, timers, and integrated true data EEPROM. These peripherals enable local sensing, serial communication, and motor or relay control while keeping the design compact. The STM8S105K4B6 is identified as part of the STM8S105x4/6 access line, with the manufacturer describing the family as offering 16 to 32 KB Flash and integrated true data EEPROM. The verified product-page result specifically associates this MPN with a 32-SDIP package, 0.400 inch, 10.16 mm. Exact operating voltage, temperature limits, ADC accuracy details, timer ratings, and electrical timing values are not included in the supplied verified data and must be checked against the manufacturer datasheet. Typical applications include small industrial controllers, sensor nodes, serial-interface equipment, LED-control boards, compact instrumentation, and embedded systems using UART, SPI, or I2C. The 16 MHz clock speed supports responsive control-loop execution, while the 10-bit ADC is useful for analog monitoring. A designer should confirm memory-map compatibility, peripheral availability, startup behavior, and electrical limits before replacing another STM8 device in an existing design. For implementation, begin with the manufacturer datasheet and reference manual for exact pin assignments, register definitions, clock settings, and peripheral constraints. Use the official STMicroelectronics product page as the primary lifecycle and family reference. This page synthesizes verified distributor specifications, procurement information, application context, and replacement guidance without inventing unavailable electrical details.

RFQ İletişim
STM8S105K4T6 - 8-bit MCU, 16KB Flash, 16MHz | STMicroelectronics
STM8S105K4T6

STM8S105K4T6 - 8-bit MCU, 16KB Flash, 16MHz | STMicroelectronics

The STM8S105K4T6 is an 8-bit microcontroller from STMicroelectronics' STM8S access line, featuring a 16 MHz STM8 core, 16 KB of Flash program memory, and 1 KB of true data EEPROM. It comes in a 32-pin LQFP package, offering a compact footprint for space-constrained embedded applications. The device operates over a supply voltage range of 2.95V to 5.5V, making it suitable for both 3.3V and 5V systems. An 8-bit microcontroller (MCU) is a single-chip computer containing a processor core, memory, and programmable input/output peripherals. The STM8S105K4T6 belongs to the STM8S family, which is designed for cost-sensitive industrial and consumer applications. As a medium-density device per reference manual RM0016, it balances performance and peripheral integration, providing a 10-bit ADC, multiple timers, and standard communication interfaces like UART, SPI, and I2C. Key features include a 16 MHz CPU clock delivering up to 16 MIPS, 16 KB Flash with read-while-write capability, 1 KB EEPROM with up to 300k write/erase cycles, and a 10-bit ADC with up to 7 channels. The device integrates a 16-bit advanced control timer, two 16-bit general-purpose timers, and a basic timer, plus UART, SPI, and I2C interfaces for connectivity with sensors, displays, and other peripherals. The STM8S105K4T6 uses a Harvard-architecture STM8 core with a 3-stage pipeline. An embedded SWIM debug module enables in-circuit debugging and programming, reducing development time. The clock system offers internal and external oscillator options, including a low-power crystal oscillator and a PLL for clock multiplication. Typical applications include industrial control, home appliances, sensor interfaces, and motor control. Its wide operating voltage range and industrial temperature grade (-40C to +85C) make it suitable for harsh environments. The integrated EEPROM eliminates external storage in many designs, reducing BOM cost. When designing with this MCU, ensure proper decoupling of power supply pins and consider the thermal characteristics of the LQFP-32 package. Reserve the SWIM interface for programming and debugging. For low-power designs, use Active-halt and Halt modes to minimize current consumption.

RFQ İletişim
STM8S105K6B6 - 8-Bit 16MHz 32KB MCU | STMicroelectronics
STM8S105K6B6

STM8S105K6B6 - 8-Bit 16MHz 32KB MCU | STMicroelectronics

The STMicroelectronics STM8S105K6B6 is an 8-bit STM8S series microcontroller operating up to 16 MHz, with 32 KB of Flash program memory and a 32-pin SDIP package. The device also provides integrated EEPROM, 25 I/O pins, mixed-signal acquisition, timers, and serial connectivity. It is positioned for compact embedded control, sensing, communications, and motor-control systems requiring an 8-bit MCU with integrated memory and peripherals. A microcontroller is a programmable semiconductor that integrates a processor core, memory, input/output ports, timers, and communication peripherals on one device. The STM8S105K6B6 belongs to the STM8S access-line family: an 8-bit MCU platform intended for compact control systems where deterministic peripheral access, low component count, and simple embedded software development are important. Its 32 KB Flash provides room for application firmware, while integrated data EEPROM supports parameter storage and calibration data. The verified specifications identify a 16 MHz operating frequency, 32 KB Flash organized as 32K × 8, 2K × 8 RAM, 25 I/O pins, and a 10-bit ADC. The verified sources also identify UART, SPI, I2C, timers, and mixed-signal acquisition capabilities. These peripherals allow the MCU to connect sensors, communicate with external controllers, generate timing signals, and perform basic analog measurements without requiring several discrete support devices. The STM8S105K6B6 is packaged in a 32-SDIP through-hole format with a stated 0.400-inch, 10.16 mm package dimension. Through-hole construction can simplify prototype assembly, inspection, and manual rework compared with fine-pitch surface-mount packages. The device is suitable for applications such as compact motor controllers, industrial sensing modules, communication interfaces, and embedded automation products, provided the firmware and board design are verified against the manufacturer datasheet. Designers should verify supply voltage, clock configuration, peripheral pin multiplexing, ADC accuracy, reset behavior, and programming requirements against the manufacturer datasheet before release. The 8-bit architecture and 32 KB Flash footprint are appropriate for focused control tasks, but software memory planning is essential when combining multiple communication protocols and control functions. Verify exact electrical limits and package details before using the device as a drop-in replacement for another MCU. This page consolidates verified distributor specifications, official manufacturer information, pricing context, sourcing links, and engineering guidance. It does not infer unprovided electrical limits, pin names, lifecycle claims, or alternative-device compatibility. For production use, confirm the current manufacturer datasheet, package drawing, programming toolchain, and distributor inventory.

RFQ İletişim
STM8S105S6T6 - 8-bit MCU, 32KB Flash, 16MHz | STMicroelectronics
STM8S105S6T6

STM8S105S6T6 - 8-bit MCU, 32KB Flash, 16MHz | STMicroelectronics

The STM8S105S6T6 is an 8-bit microcontroller from STMicroelectronics' STM8S access line, featuring a high-performance STM8 core running at up to 16 MHz. It integrates 32 Kbytes of Flash program memory, 2 Kbytes of RAM, and true data EEPROM, making it suitable for a wide range of embedded control applications. The device operates from a 3.3V or 5V supply and is available in a 44-pin LQFP package. An 8-bit microcontroller is a single-chip computer with an 8-bit data bus, designed for cost-sensitive control applications. It typically integrates a CPU, memory (Flash, RAM, EEPROM), and peripherals such as timers, UART, SPI, and ADC on a single die. In the system hierarchy, an 8-bit MCU sits below 16-bit and 32-bit MCUs in processing power but offers lower cost, lower power consumption, and simpler development, making it ideal for applications like home appliances, industrial control, and consumer electronics. Key features of the STM8S105S6T6 include a 10-bit ADC with up to 10 channels, multiple 16-bit timers, a UART, SPI, and I2C interfaces, and an integrated EEPROM for data storage. The STM8 core is CISC-based with a pipeline architecture, achieving 16 MIPS at 16 MHz. The device supports a wide operating voltage range of 2.95V to 5.5V, ensuring compatibility with both 3.3V and 5V systems. The STM8S105S6T6 is part of the STM8S105xx medium-density family, which offers from 16 to 32 Kbytes of Flash. It is pin-compatible with other STM8S105 devices, allowing easy migration between memory sizes. The integrated EEPROM eliminates the need for external EEPROM chips, reducing BOM cost and board space. The device also features robust ESD protection and a wide operating temperature range of -40°C to +85°C. Typical applications include home appliances (washing machines, air conditioners), industrial control (motor control, sensors), and consumer electronics (remote controls, power tools). The rich peripheral set and low cost make it a popular choice for high-volume applications. The 44-pin LQFP package provides a good balance between I/O count and board space. When designing with this MCU, ensure proper decoupling of the power supply with 100nF and 10uF capacitors close to the VDD pins. The STM8S105S6T6 supports in-circuit programming and debugging via SWIM, simplifying firmware development. For low-power applications, use the HALT and WAIT modes to reduce current consumption.

RFQ İletişim
STM8S207C6T3 - 24MHz 32KB 8-Bit MCU | STMicroelectronics
STM8S207C6T3

STM8S207C6T3 - 24MHz 32KB 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8S207C6T3 is a 24 MHz, 8-bit STM8S performance-line microcontroller with 32 KB of Flash program memory, integrated EEPROM, and a 48-LQFP package. The device includes a 10-bit ADC, timers, two UARTs, SPI, I²C, and CAN interfaces, providing a compact embedded-control platform for industrial, consumer, communications, and automotive-adjacent equipment. An 8-bit microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, data memory, and peripherals onto one package. The STM8S207 belongs to the STM8S family and the broader hierarchy of microcontroller → embedded processor → semiconductor. Its performance-line positioning combines a 24 MHz clock with multiple serial interfaces, making it useful where moderate control processing and system connectivity matter more than the processing power of a 32-bit Cortex-M device. Key features include 32 KB of Flash memory, an integrated 10-bit analog-to-digital converter, two UARTs, SPI, I²C, and CAN connectivity, plus 38 I/O ports according to the retrieved product data. The 3 V to 5.5 V supply range supports conventional embedded equipment, while the 48-pin LQFP package exposes enough interface pins for external memories, sensors, actuators, and communications transceivers. The STM8S207C6T3 belongs to STMicroelectronics' STM8S20xxx performance line, whose devices span program-memory configurations from 32 KB to 128 KB. This particular ordering code provides the 32 KB configuration and 24 MHz maximum operating frequency. Its combination of EEPROM and Flash supports firmware storage and nonvolatile parameter retention without requiring an external memory component in designs that remain within the available memory budget. Typical applications include industrial sensor nodes, CAN-connected equipment, motor and relay controllers, building-control interfaces, compact communication modules, and low-cost embedded control panels. The CAN interface is especially useful in systems that need deterministic network participation, while SPI and I²C allow the controller to connect sensors and external transceivers. The two UARTs also support legacy serial peripherals, diagnostics ports, or service interfaces. Designers should verify the exact pin assignment, alternate-function mapping, clock configuration, and peripheral electrical limits in the manufacturer datasheet before layout release. The LQFP package also requires attention to thermal dissipation when the device operates continuously at 24 MHz or drives I/O loads at the maximum specified levels. Because public snippets do not provide a complete verified pin list, no unverified pin assignments are asserted here. This page consolidates verified distributor and manufacturer information, practical integration guidance, package-specific comparisons, and honest drop-in alternative constraints. It distinguishes confirmed values from missing details and avoids presenting generic cross-reference results as guaranteed replacements.

RFQ İletişim
STM8S207C8T3 - 24MHz 8-Bit MCU with 64KB Flash | ST
STM8S207C8T3

STM8S207C8T3 - 24MHz 8-Bit MCU with 64KB Flash | ST

The STMicroelectronics STM8S207C8T3 is an 8-bit STM8 performance-line microcontroller with a 24 MHz clock, 64 KB of Flash program memory, and a 48-LQFP 7 x 7 mm package. The supplied distributor data identifies an 8-bit architecture and confirms 64 KB Flash; Mouser additionally lists 4 KB RAM. Designed as a compact embedded-control MCU, it combines mixed-signal measurement, communications, timing, and general-purpose I/O capabilities for cost-sensitive industrial and consumer equipment. An STM8S microcontroller belongs to the 8-bit MCU hierarchy: microprocessor core, embedded controller, and programmable digital control component. Unlike a discrete logic controller, an MCU integrates firmware memory, data memory, peripherals, and I/O in one package. This integration lets a design acquire sensor inputs, execute control logic, drive outputs, and exchange data with other assemblies without requiring several separate logic devices. Confirmed features include 24 MHz operation, 64 KB Flash, 4 KB RAM, 38 I/O ports, and a 3 V to 5.5 V supply range. The STM8S207 family description also identifies a 10-bit ADC, timers, two UARTs, SPI, I2C, and CAN. These interfaces support analog measurement, actuator control, serial peripherals, industrial networking, and service communications. The exact pin assignments and complete electrical limits require confirmation against the manufacturer documentation. At a maximum 24 MHz clock, the 8-bit MCU provides useful processing throughput without an external memory interface. Its 64 KB Flash supports embedded application code, while 4 KB RAM handles working data and stack operations. The 48-LQFP package exposes substantially more I/O than smaller packages, making the device suitable for connectorized control boards that need numerous digital, analog, and communications signals. Typical uses include industrial control modules, motor and relay-control boards, sensor acquisition units, CAN-connected equipment, communication bridges, and compact consumer appliances. A design can place the MCU beside sensors and power stages, then use its ADC and serial interfaces to acquire measurements while timers and GPIO control the system. Firmware and external circuitry still require validation for timing, analog accuracy, and EMC requirements. The principal layout consideration is careful decoupling and signal grouping around the 48-LQFP device. Keep the MCU supply path compact, place stable bypass capacitance at its supply pins, reserve adjacent routing for sensitive analog inputs, and separate high-current switching returns. Before layout approval, verify every ball-and-pad-style LQFP pin assignment against the official pinout and confirm oscillator, debug, reset, and communications routing requirements. This page consolidates verified distributor specifications, sourcing information, family capabilities, and practical selection considerations. It distinguishes confirmed STM8S207C8T3 values from unavailable details rather than estimating electrical limits, package pricing tiers, pin functions, or lifecycle compliance claims.

RFQ İletişim
STM8S207C8T6 - 24MHz 8-bit MCU, 64KB Flash | STMicroelectronics
STM8S207C8T6

STM8S207C8T6 - 24MHz 8-bit MCU, 64KB Flash | STMicroelectronics

The STM8S207C8T6 is a performance-line 8-bit microcontroller from STMicroelectronics, built around a high-performance STM8 core running at up to 24 MHz. It integrates 64 KB of Flash program memory, 4 KB of RAM, and 2 KB of EEPROM, along with a rich peripheral set including a 10-bit ADC, multiple timers, two UARTs, SPI, I2C, and CAN. Housed in a 48-pin LQFP package, this MCU is designed for cost-sensitive industrial and consumer applications requiring robust performance and a wide operating voltage range of 2.95V to 5.5V. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus that integrates a processor core, memory (Flash, RAM, EEPROM), and programmable peripherals (timers, ADC, communication interfaces) on one die. In the system hierarchy, an 8-bit MCU sits below 16-bit and 32-bit MCUs in processing power but offers lower cost, simpler architecture, and lower power consumption, making it ideal for control-oriented tasks. The STM8S207C8T6 belongs to the STM8 family from STMicroelectronics, positioned between the low-cost STM8S value line and the 32-bit ARM-based STM32 MCUs. Key features include a 24 MHz CPU clock (20 MIPS), 64 KB Flash with read-while-write capability, 2 KB of true EEPROM rated for up to 300k write/erase cycles, and a 10-bit ADC with up to 10 multiplexed channels. Communication interfaces cover two UARTs, one SPI, one I2C, and a CAN 2.0B controller. Operation from 2.95V to 5.5V supports both 3.3V and 5V systems, with low-power modes reducing consumption below the 5.4 mA typical running current at 24 MHz. Technically, the STM8 core is a CISC architecture with a 3-stage pipeline and a single-wire debug interface (SWIM) supporting ICP and IAP programming. The LQFP-48 package provides 38 I/O pins, most with multiple alternate functions for flexible board design. Typical applications include industrial control systems, home appliances, motor control, sensor interfaces, and CAN-networked nodes in automotive and industrial systems, where the rich timer set supports PWM generation. Design tip: decouple VDD/VDDA with 100nF capacitors placed close to the device, add a pull-up on SWIM, and use an external transceiver (e.g., TJA1050) with 120-ohm bus termination for CAN.

RFQ İletişim