Ürünler (21.000+)

Z86E4016AEG - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E4016AEG

Z86E4016AEG - 8-Bit 16MHz OTP Microcontroller | Zilog

Zilog Z86E4016AEG is an 8-bit Z8 CISC microcontroller with a 16 MHz operating frequency, 4 KB of one-time-programmable program memory, and 236 bytes of RAM, packaged in a 44-pin LQFP measuring 10 mm by 10 mm. The device operates from a 4.5 V to 5.5 V supply and targets compact embedded-control systems requiring embedded flash-equivalent program storage, serial I/O, timers, and a surface-mount footprint. An 8-bit microcontroller is a compact embedded-control IC that executes firmware from program memory and uses dedicated peripherals to sense inputs, control outputs, and communicate with external circuits. Zilog's Z8 family combines a simple CISC-style architecture with integrated timers, serial interfaces, and interrupt support. In the broader semiconductor hierarchy, this device belongs to the microcontroller, embedded-processor, and integrated-circuit categories. The Z86E4016AEG's main engineering characteristics include 16 MHz operation, 4 KB of OTP memory, 236 bytes of data RAM, and a 4.5 V to 5.5 V operating range. OTP memory permits a programmed device to be installed directly into production hardware without permitting subsequent firmware changes. The 44-pin LQFP also exposes more I/O and peripheral connections than a small-package microcontroller, making the part suitable for products that require several discrete control functions. The Z8 core uses an 8-bit datapath and is designed for straightforward embedded applications rather than high-throughput computation. Firmware must fit within the 4 KB program-memory limit, while the 236-byte RAM constrains simultaneously retained data structures and stack usage. Designers should therefore use interrupt-driven routines, compact state tables, and peripheral hardware where practical. The 5 V supply range also allows the controller to operate directly from regulated 5 V industrial or consumer rails after appropriate filtering and decoupling. Typical uses include appliance controllers, small motor-control boards, keypad interfaces, LED status indicators, temperature-measurement systems, simple serial bridges, and dedicated embedded-control panels. The LQFP package can be assembled by conventional surface-mount equipment, while its relatively high pin count provides access to multiple I/O, timer, interrupt, and serial-interface functions. Applications requiring field-updatable firmware should use a flash-memory MCU instead because the Z86E4016AEG provides OTP rather than rewritable program memory. Decouple the 5 V supply close to the device with suitable high-frequency and bulk capacitance, route oscillator and reset-related connections away from noisy switching nodes, and follow the manufacturer pin-assignment guidance when allocating board space. Because program memory is one-time programmable, validate the complete firmware image and production programming process before committing components to a build. This product overview combines electrical characteristics, package constraints, application guidance, programming implications, and practical design considerations to support component selection, PCB planning, and embedded-system implementation.

RFQ İletişim
Z86E4016ASG - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E4016ASG

Z86E4016ASG - 8-Bit 16MHz OTP Microcontroller | Zilog

The Zilog Z86E4016ASG is an 8-bit Z8 microcontroller operating at up to 16 MHz, with 4 KB of one-time programmable program memory, 236 bytes of RAM, and 32 general-purpose I/O pins in a 44-pin LQFP package measuring 10 mm by 10 mm. Its operating supply range is 3.5 V to 5.5 V, and the device is specified for a 0°C to +70°C ambient temperature range. A microcontroller is an integrated circuit dedicated to executing embedded control software. The Z8 family belongs to the broader hierarchy of embedded processor, microcontroller, semiconductor, and electronic-control categories. It combines a processor core, nonvolatile program storage, volatile data memory, digital I/O, and integrated timing functions on one device, allowing compact designs for control, monitoring, and user-interface applications. The Z86E4016ASG provides 4 KB of OTP memory organized as 4K x 8, along with 236 x 8 bytes of RAM. Its 16 MHz operating rate supports efficient sequential instruction execution, while 32 general-purpose I/O pins provide a broad interface for switches, indicators, sensors, actuators, and external logic. Built-in power-on reset and watchdog-timer functions support dependable startup and recovery after a program fault. An internal oscillator simplifies board design by removing the need for an external clock source in a basic configuration. The device combines that oscillator with the Z8 core, OTP program memory, RAM, I/O ports, power-on reset, and watchdog timer in a 44-pin LQFP-44 package. The 10 mm by 10 mm surface-mount format supports compact production assemblies while retaining a generous pin count for mixed-signal and control-oriented products. Typical uses include industrial control panels, appliance controllers, building equipment, simple security systems, digital input/output modules, and compact embedded products. The 32 I/O pins make the device useful where several external switches, indicators, relays, or sensors must be coordinated by a single controller. Applications requiring one-time programmable firmware benefit from the OTP architecture because the finished program cannot be electrically rewritten. When designing a board, confirm every signal against the Z86E4016ASG pin description before assigning PCB tracks. Decoupling requirements, oscillator behavior, reset timing, and unused-pin treatment should follow the manufacturer datasheet. The 3.5 V minimum operating voltage and 5.5 V maximum operating voltage also determine the compatible sensor and actuator interface ranges. This product page consolidates the verified device specifications, sourcing information, engineering-use guidance, and a qualified comparison framework. Because the Z8 family's programming and peripheral configuration are application-specific, engineers should also consult the manufacturer documentation for the complete pin-description table and device operating characteristics.

RFQ İletişim
Z86E4016FEC - 8-Bit 16MHz 4KB OTP MCU | Zilog | LQFP-44
Z86E4016FEC

Z86E4016FEC - 8-Bit 16MHz 4KB OTP MCU | Zilog | LQFP-44

Zilog, Inc. Z86E4016FEC is an 8-bit Z8 microcontroller with a 16 MHz maximum operating frequency, 4 KB of one-time-programmable program memory, and a 44-LQFP surface-mount package measuring 10 mm by 10 mm. It integrates 32 general-purpose I/O pins, power-on reset, and a watchdog timer for compact embedded-control designs. An 8-bit microcontroller is a programmable integrated circuit designed around an eight-bit processor and a set of dedicated peripherals. Within the embedded-control hierarchy, the Z86E4016FEC belongs to the Z8 family of Zilog microcontrollers and provides a combination of processor throughput, OTP program storage, digital I/O, reset supervision, and watchdog protection in one device. The principal features include 8-bit processing at up to 16 MHz, 4 KB of OTP program memory, and 32 general-purpose I/O pins. Two 8-bit timers are also identified in the verified technical listing. OTP memory provides a permanent on-chip program store, which can be appropriate for cost-sensitive products in which firmware does not require field updates. The device uses the Z8 architecture and is intended for embedded products requiring straightforward digital control rather than high-bandwidth processing. Its 16 MHz operating speed supports control loops, button and sensor handling, indicator updates, and peripheral coordination. The integrated power-on reset and watchdog timer help establish reliable startup behavior and recover from certain software faults. Typical application areas include industrial control panels, appliance controllers, building equipment, simple motor-control interfaces, and dedicated embedded modules. The 44-LQFP package provides 32 general-purpose I/O pins, allowing a design to connect multiple sensors, switches, displays, and actuators while leaving fewer functions to external logic. Design planning should focus on OTP programming timing, available RAM, pin multiplexing, oscillator configuration, and programming-tool compatibility. Because the verified data does not provide a complete pin list, voltage limits, or thermal ratings, those details must be confirmed against the official Zilog documentation before schematic capture or PCB release. This product page consolidates verified distributor specifications, package information, application guidance, and verified sourcing links. It also clearly separates confirmed data from unavailable specifications, helping engineers make sourcing and design decisions without treating unverified electrical details as guaranteed facts.

RFQ İletişim
Z86E4016FEG - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E4016FEG

Z86E4016FEG - 8-Bit 16MHz OTP Microcontroller | Zilog

The Zilog Z86E4016FEG is an 8-bit Z8 microcontroller with 4 KB of one-time-programmable program memory, 236 x 8 bits of RAM, 32 I/O pins, and a maximum operating speed of 16 MHz. It is housed in a 44-LQFP surface-mount package measuring 10 x 10 mm. The device also includes an internal oscillator, Power-On Reset (POR), and a Watchdog Timer (WDT), providing the core resources for compact embedded control designs. An 8-bit microcontroller is a microprocessor integrated with memory, I/O, and supporting peripherals on one integrated circuit. Within the semiconductor hierarchy, the Z86E4016FEG is an MCU, a microcontroller, and an embedded processing IC designed for control-oriented tasks rather than high-throughput computation. Its OTP program memory allows firmware to be programmed once during manufacturing or final assembly, while its 236-byte RAM supports working variables, stack operations, and short-lived application data. The principal feature set includes 4 KB of OTP program memory, 236 x 8 bits of RAM, 32 general-purpose I/O pins, and a 16 MHz operating speed. An internal oscillator reduces the need for an external clock source in applications that do not require an extremely precise timing reference. The Power-On Reset establishes a known startup state, while the Watchdog Timer helps recover the controller from an unintended stalled execution sequence. The Z86E4016FEG belongs to the Zilog Z8 family, an 8-bit MCU architecture commonly used for appliance control, simple industrial interfaces, embedded instrumentation, and compact control panels. Its 32 I/O pins provide substantial external connectivity relative to smaller 8- and 16-pin devices, making the device useful for keypads, displays, sensors, relay logic, and communication peripherals when their electrical requirements are compatible with the MCU's specifications. The 44-LQFP package supports surface-mount assembly but requires careful land-pattern design and adequate pin escape routing. Published source material states that total package power dissipation should not exceed 1.2 W under the indicated stress conditions. Designers should therefore verify the complete operating-voltage, input-pin, clock, and output-drive budget against the manufacturer datasheet before releasing a production PCB. This product page consolidates the verified Z86E4016FEG specifications, package details, source links, engineering guidance, and replacement analysis. It also clearly separates verified facts from unavailable electrical details, helping engineers avoid assumptions about voltage limits, timer channels, communications peripherals, or pin-level functions that are not present in the supplied source data.

RFQ İletişim
Z86E4016FSC - 16MHz 8-Bit OTP Microcontroller | Zilog
Z86E4016FSC

Z86E4016FSC - 16MHz 8-Bit OTP Microcontroller | Zilog

Zilog, Inc. Z86E4016FSC is an 8-bit Z8 microcontroller operating at 16 MHz with 4 KB of one-time-programmable memory in a 44-LQFP 10 x 10 mm package. It is designed for compact embedded control systems that require deterministic 8-bit processing, OTP program storage, and a relatively high pin count for mixed-signal and peripheral connections. A microcontroller is a programmable semiconductor that integrates a processor core, program memory, data memory, I/O ports, and supporting peripherals onto one device. The Z86E4016FSC belongs to the Z8 family of 8-bit microcontrollers, combining simple instruction-based control with integrated embedded resources. Its 16 MHz operating speed supports responsive control loops in applications that do not require the processing power or memory bandwidth of a 16-bit or 32-bit MCU. The most important headline characteristics are its 16 MHz clock rate, 4 KB OTP program memory, and 8-bit architecture. Because OTP memory is programmed once during manufacturing or provisioning, the device is well suited to products whose firmware and configuration are fixed before shipment. This differs from a field-programmable Flash MCU, making OTP convenient for cost-sensitive volume production but unsuitable when frequent firmware updates are required. The 44-LQFP package provides substantially more connection options than a small 8- or 20-pin controller. That pin count can accommodate digital I/O, control outputs, communications, analog functions, and programming or debug signals more flexibly. However, the exact pin assignments, peripheral mix, voltage limits, and electrical characteristics must be confirmed in the manufacturer datasheet before the package is assigned to a PCB layout. Typical uses include appliance controllers, building-control interfaces, industrial control modules, keyboard and human-interface controllers, sensor-conditioning systems, and small embedded products with fixed firmware. The 16 MHz clock and 8-bit architecture are particularly appropriate for supervisory control, state-machine execution, signal scanning, and actuator coordination rather than high-bandwidth data processing. Designers should begin with the manufacturer pin-description table and electrical characteristics, then verify oscillator, reset, programming, and I/O requirements against the intended schematic. Because the program memory is OTP, firmware validation and manufacturing-programming workflow must be completed before devices are committed to a production build. This page consolidates the core Z86E4016FSC identity, verified package and memory characteristics, sourcing guidance, replacement considerations, and practical selection criteria into a concise engineering reference. It is intended to accelerate initial design review while directing final PCB, firmware, and qualification decisions to the authoritative manufacturer documentation.

RFQ İletişim
Z86E4016PEG - 16MHz 8-Bit OTP Microcontroller | Zilog
Z86E4016PEG

Z86E4016PEG - 16MHz 8-Bit OTP Microcontroller | Zilog

Zilog Z86E4016PEG is an 8-bit Z8 CISC microcontroller operating at 16 MHz, with 4 KB of one-time-programmable program memory, 236 bytes of RAM, and 32 I/O lines in a 40-pin PDIP package. It operates from 4.5 V to 5.5 V and is designed for cost-sensitive embedded control systems requiring a compact peripheral set and deterministic embedded processing. A microcontroller is an integrated circuit containing a processor core, program memory, data memory, I/O ports, and embedded peripherals on one die. The Z86E4016PEG belongs to the Z8 family of 8-bit microcontrollers, a cost-effective architecture widely used for appliance control, industrial interfaces, simple instrumentation, and dedicated automation. Its CISC instruction set is designed for efficient control-oriented code and short development cycles. The device provides 4 KB of OTP program memory, allowing firmware to be programmed once after development. Its 236 x 8 bytes of RAM provide working storage for variables, stack operations, and application data. With 32 I/O lines, the MCU can connect directly to digital sensors, switches, indicator circuits, displays, and external control devices. Integrated Power-On Reset and Watchdog Timer functions support dependable startup and recovery behavior. The 16 MHz operating frequency provides a practical balance between processing throughput, power consumption, and design complexity for embedded control tasks. The internal oscillator eliminates the need for an external clock in applications that do not require precise timing references. The 4.5 V to 5.5 V operating range supports conventional industrial and consumer logic environments, while the 40-pin PDIP package supports conventional through-hole PCB assembly and prototyping. Typical applications include appliance controllers, small motor-control interfaces, digital input/output modules, LED sequencing systems, temperature-control products, and industrial control boards. The 32 available I/O lines make it especially useful when multiple discrete inputs and outputs must be managed without adding another interface IC. Firmware can implement debouncing, state machines, interlocks, fault handling, and communication routines. Designers should verify the complete pin assignment and peripheral multiplexing in the manufacturer datasheet before assigning signals. Because the program memory is OTP rather than rewriteable flash, firmware changes after programming require a different device and a complete replacement. Decoupling, grounding, and reset circuitry should follow the datasheet layout recommendations, and unused I/O pins should be assigned deliberately rather than left without a defined state. This product page combines the Z8 microcontroller specifications, verified package and memory information, same-package replacement references, application guidance, and design considerations. It is intended to help engineers evaluate firmware fit, pin compatibility, OTP programming constraints, and PCB assembly requirements before selecting the Z86E4016PEG.

RFQ İletişim
Z86E4016PSG - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E4016PSG

Z86E4016PSG - 8-Bit 16MHz OTP Microcontroller | Zilog

The Zilog Z86E4016PSG is an 8-bit Z8 microcontroller with a 16 MHz maximum clock frequency and 4 KB of one-time-programmable program memory. It is packaged in a 40-pin through-hole dual inline package and is positioned for cost-sensitive, high-volume embedded control applications. The device combines a Z8 CPU core with 236 bytes of data RAM and operates as a compact embedded controller for consumer, automotive, security, and HVAC equipment. The Z86E4016PSG is designed around one-time-programmable memory, which allows the final firmware image to be written during manufacturing and removes the need for external reprogrammable flash. Its 4 KB program memory is intended for compact control loops, keypad and panel management, sensor conditioning, actuator control, and simple protocol handling. The 16 MHz clock provides adequate processing headroom for deterministic control functions without requiring a high-pin-count package. Important device characteristics include the Z8 CPU architecture, 236 bytes of data RAM, 4 KB OTP program memory, and a 40-DIP package. The Z8 family is intended for applications where cost, simplicity, and compact control are more important than high-capacity firmware storage or extensive connectivity. The through-hole package also supports conventional through-hole PCB assembly and is suitable for designs using socketed or manually assembled boards. Typical application areas include consumer appliances, automotive accessory modules, security and access-control equipment, HVAC controllers, and small industrial control panels. The Z86E4016PSG is especially useful when the control algorithm is stable and the product can be programmed once during production. Designers should plan the firmware size carefully because OTP memory cannot be rewritten, and should use the manufacturer pin-description table when assigning PCB tracks and I/O functions. For new designs, check the manufacturer datasheet for electrical limits, clock configuration, port behavior, and programming details before layout release. This page combines verified distributor listings, the manufacturer datasheet reference, package information, and practical selection guidance for engineers evaluating a 40-pin 8-bit OTP controller.

RFQ İletişim
Z86E4016VEG 16MHz 8-Bit OTP MCU | Zilog | 44-Pin LCC
Z86E4016VEG

Z86E4016VEG 16MHz 8-Bit OTP MCU | Zilog | 44-Pin LCC

Zilog Z86E4016VEG is an 8-bit Z8 microcontroller with a 16 MHz operating frequency, 4 KB one-time-programmable memory, 236 bytes of RAM, and 32 I/O lines in a 44-pin plastic leaded chip carrier package. Its operating supply range is 4.5 V to 5.5 V. The device combines a conventional 8-bit CPU, OTP program memory, volatile data memory, and programmable I/O in a compact surface-mount package. An 8-bit microcontroller is a compact control IC designed for embedded logic, sequencing, input monitoring, and output control. Within the embedded-control hierarchy, the Z86E4016VEG belongs to the Z8 family of 8-bit microcontrollers and uses one-time-programmable memory rather than mask-programmed ROM or rewritable flash. This architecture is suited to moderate-control tasks where firmware is written once and the completed product does not require in-circuit firmware updates. The principal device characteristics include a 16 MHz clock, 4 KB or 4K x 8 bits of OTP program memory, 236 bytes of RAM, 32 I/O lines, and a 4.5 V to 5.5 V supply range. The Z8 core provides the central processing, interrupt, timer, and I/O resources required for embedded control. Programmable OTP options shown in the device documentation include an RC oscillator, EPROM protection, and auto-latch disable, allowing the final configuration to be tailored to the product design. The Z86E4016VEG is offered in a 44-pin LCC package measuring approximately 16.6 mm by 16.6 mm. Its relatively high pin count provides access to 32 I/O lines alongside control and power functions. Because the MCU operates from a narrow 5 V-class supply range, the board designer must account for the supply tolerance, startup behavior, oscillator requirements, and port loading of the selected implementation. Typical uses include appliance and industrial control modules, keyboard or panel interfaces, simple motor-sequencing controllers, LED status and lighting controllers, and compact embedded products that require deterministic one-time-programmed control. The device is especially appropriate when program revisions are unnecessary and its 32 I/O lines, 236-byte RAM, and 16 MHz processing rate satisfy the control workload. For PCB design, use the manufacturer pin-description table to assign every LCC-44 connection, provide the required clock and decoupling components, and keep sensitive input paths away from switching nodes. Confirm the selected package drawing, exposed programming method, and operating-temperature limits against the official datasheet before releasing a PCB. This product page consolidates the core Z86E4016VEG specifications, package information, sourcing guidance, application context, and validated drop-in alternatives. The comparison and design notes focus on the decisions that materially affect firmware support, PCB reuse, I/O availability, and supply compatibility.

RFQ İletişim
Z86E4016VSG - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E4016VSG

Z86E4016VSG - 8-Bit 16MHz OTP Microcontroller | Zilog

The Zilog Z86E4016VSG is an 8-bit Z8 microcontroller with 16 MHz clock speed, 4 KB of one-time-programmable ROM, 32 I/O lines, and a PLCC-44 surface-mount package. The device operates from a 4.5 V to 5.5 V supply and is intended for embedded control applications requiring an 8-bit data bus and compact peripheral integration. A microcontroller is a programmable semiconductor that combines a processor core, program memory, data memory, I/O ports, timers, and communication interfaces on one integrated circuit. The Z86E4016VSG belongs to the Z8 Classic family of 8-bit embedded processors. It is positioned between general-purpose microcontrollers and larger 16-bit or 32-bit control platforms, providing sufficient performance for appliance controls, industrial interfaces, instrumentation, and embedded peripheral control. The principal specifications are a 16 MHz clock speed, 4 KB of OTP program memory, 236 bytes of RAM, and 32 I/O lines. The 8-bit bus architecture simplifies connection to common peripherals, while the 44-pin PLCC package provides a substantial lead count for digital input/output functions and control signals. Programmable OTP options include an RC oscillator, EPROM protection, and automatic latch disable, as identified in the manufacturer family information. The Z8 architecture is designed for compact embedded control rather than high-throughput computing. Its 8-bit data path and 16 MHz operating clock are well suited to sequential control logic, signal conditioning, keypad and switch scanning, lamp or relay control, and communication-interface peripherals. Because program memory is one-time-programmable, the device is appropriate for production designs where a fixed firmware image is assigned during manufacturing. Typical uses include industrial control modules, test and measurement equipment, appliance controllers, building-control interfaces, and compact embedded systems. The PLCC-44 package also supports socket-based prototypes and serviceable assemblies, while a surface-mount implementation provides a compact permanent PCB footprint. The 4.5 V to 5.5 V supply range supports conventional 5 V logic systems. Designers should verify oscillator, timing, reset, and port requirements against the Z86E40 family documentation before schematic capture. OTP programming must be planned as a manufacturing step, and the permanent-programming decision should be reviewed against field-update requirements. The 44-pin PLCC footprint should also be checked for thermal performance and assembly compatibility. This product page consolidates the device specifications, verified source links, package characteristics, application guidance, and drop-in replacement status. It also distinguishes electrically similar devices that use different packages, preventing a footprint mismatch from being mistaken for a PCB-compatible replacement.

RFQ İletişim
Z86E4312ASG - 8-Bit 12MHz OTP MCU | Zilog | LQFP-44
Z86E4312ASG

Z86E4312ASG - 8-Bit 12MHz OTP MCU | Zilog | LQFP-44

The Zilog Z86E4312ASG is an 8-bit Z8 microcontroller rated at 12 MHz, with 4 KB of one-time-programmable program memory, 236 bytes of RAM, and a 44-lead LQFP package measuring 10 mm by 10 mm. It operates from 3.5 V to 5.0 V and integrates 32 I/O lines, six interrupt sources, two timers, two comparators, a watchdog timer, power-on reset, and low-voltage protection. An 8-bit microcontroller is a compact processor designed to execute embedded control instructions, read sensor inputs, update outputs, and manage communication or timing functions. The Z8 family belongs to the broader hierarchy of embedded processors, microcontrollers, and programmable control semiconductors. Its one-time-programmable memory permits a finished device to be programmed once for its intended control application. The principal features of the Z86E4312ASG support space-constrained control systems requiring a moderate amount of program memory. Its 12 MHz operating speed provides processing capacity for sequential control tasks, while 32 I/O lines offer substantial connectivity for switches, indicators, sensors, actuators, and external bus devices. Six interrupts and two timers support event-driven operation, while the watchdog timer helps recover the controller after faults. The Z86E4312ASG also includes two analog comparators, power-on reset, and low-voltage protection. These resources reduce the need for separate peripheral devices in suitable systems. The EBI/EMI interface provides a route for external bus communication, allowing the controller to work with additional memory or peripheral circuits when the application requires more connectivity than the general-purpose I/O pins provide. Typical uses include industrial control panels, appliance controllers, small motor-control boards, security and access-control units, instrumentation, and embedded products with multiple discrete inputs and outputs. Its 4 KB OTP program memory is most appropriate for compact control loops, state machines, product selection logic, and supervisory functions rather than resource-intensive connectivity or graphics processing. When designing around this device, verify the 3.5 V to 5.0 V operating range against every external circuit and signal level. Treat the 236 bytes of RAM as a strict working-memory budget, and assign program memory carefully because OTP cannot be rewritten. PCB planning should preserve access to all 44 LQFP leads and provide suitable decoupling and signal-routing margins. This product page combines the Z86E4312ASG electrical specifications, package information, application guidance, design considerations, and a parameter-level comparison with closely related Zilog controllers. It is intended to help engineers assess memory, clock speed, package fit, peripheral requirements, and replacement strategy before releasing a production schematic or PCB design.

RFQ İletişim
Z86E4312FSC - 8-Bit 12MHz OTP MCU | Zilog | Embedded Control
Z86E4312FSC

Z86E4312FSC - 8-Bit 12MHz OTP MCU | Zilog | Embedded Control

The Zilog Z86E4312FSC is an 8-bit CMOS Z8 OTP microcontroller rated for operation up to 12 MHz, with 4 KB of one-time-programmable program memory and a 44-LQFP package measuring 10 mm by 10 mm. The device is positioned for compact embedded-control designs that require deterministic peripheral integration and application-specific programming rather than field-upgradeable firmware storage. A microcontroller is the central control element of an embedded system. It executes firmware, reads inputs, updates outputs, and coordinates connected peripherals. The Z8 family combines an 8-bit processor architecture with OTP program memory, RAM, timers, and general-purpose I/O in one integrated circuit. OTP memory is programmed once during manufacturing or board assembly and cannot subsequently be erased or rewritten. The Z86E4312FSC combines a 12 MHz maximum operating frequency with 4 KB of OTP program memory. A secondary listing identifies 237 bytes of RAM, 24 I/O lines, and two 8-bit timers, while the product description identifies the device as a 4 KB, 12 MHz Z8 microcontroller. These characteristics make the part suitable for compact control products with modest code requirements and multiple digital interfaces. The device uses CMOS technology and is offered in a 44-LQFP surface-mount package. A 10 mm by 10 mm footprint supports compact PCB layouts but requires careful routing between its fine-pitch leads. Its listed I/O quantity and dual timer arrangement can reduce the need for external peripheral components in control, measurement, and actuator-interface systems where the application fits within the available program-memory capacity. Typical applications include industrial keypad and panel controllers, compact instrumentation, appliance control modules, programmable timers, and dedicated interface controllers. OTP programming is particularly appropriate for products whose firmware and configuration are fixed before deployment. For designs requiring field updates, the OTP limitation should be weighed against a controller using rewritable program memory. PCB design should preserve a clean return path around the clock, oscillator, reset, and power pins. Follow the manufacturer’s pin-description table and recommended application circuit when assigning tracks, placing bypass capacitors, and configuring the external crystal or clock source. This product record combines the exact Z86E4312FSC ordering information with package, memory, speed, and interface characteristics. It also highlights programming constraints, verified replacement status, and design considerations that help engineers determine whether this Z8 OTP microcontroller fits the target control system.

RFQ İletişim
Z86E4312FSG - 12MHz 8-Bit MCU with 32 I/O | Zilog
Z86E4312FSG

Z86E4312FSG - 12MHz 8-Bit MCU with 32 I/O | Zilog

Zilog Z86E4312FSG is an 8-bit Z8 microcontroller with a 12 MHz maximum operating speed, 4 KB of one-time-programmable program memory, 236 x 8 bits of RAM, and 32 general-purpose I/O pins in a 44-LQFP 10 x 10 mm surface-mount package. It operates from a 3.5 V to 5.5 V supply and is specified for a 0°C to 70°C ambient temperature range. A microcontroller is a programmable semiconductor that combines a CPU core, nonvolatile program memory, volatile data memory, and peripherals on one integrated circuit. The Z8 family belongs to the 8-bit microcontroller hierarchy and provides a compact control platform for embedded products. Z86E4312FSG also supports EBI/EMI connectivity, Power-On Reset, and a Watchdog Timer, allowing it to supervise and control peripheral circuitry in compact industrial or consumer equipment. The device provides 4 KB organized as 4K x 8 bits of OTP program memory and 236 x 8 bits of RAM. Its internal oscillator eliminates the need for an external clock source in designs that can use the specified operating frequency. The 32 I/O pins provide substantial parallel interface capacity, while the 3.5 V to 5.5 V operating range suits conventional 5 V embedded-control equipment. The 44-LQFP package also supports programmed and PCB-manufactured production methods. The Z8 architecture targets straightforward embedded control, including digital input evaluation, output sequencing, timing, and communication. EBI/EMI connectivity expands the available interface options for external memory or related bus-connected functions. Power-On Reset establishes a controlled startup state, while the Watchdog Timer helps recover from unintended program stalls. These integrated resources reduce the number of external support components required for basic embedded-control designs. Typical uses include industrial automation controllers, appliance-control modules, instrumentation interfaces, and compact consumer products. The 32 I/O pins are particularly useful for keypad scanning, display-control signals, relay or switch inputs, status indicators, and external bus connections. The internal oscillator makes the MCU appropriate for cost-sensitive systems where an accurate external time base is not required. Designers should verify every electrical limit and pin function against the manufacturer datasheet before layout is released. OTP program memory is one-time programmable, so firmware validation must occur before programming. Decoupling, grounding, and exposed-pad layout should follow the datasheet recommendations. Because no verified pin names or detailed electrical limits were supplied, the package pinout and several implementation-specific values are intentionally left unresolved rather than guessed. This page combines the verified 12 MHz, 4 KB OTP, 236 x 8-bit RAM, 32 I/O, supply-voltage, temperature, and 44-LQFP specifications with practical application guidance. It also distinguishes the verified same-family alternative and identifies where additional datasheet information is required for a production release.

RFQ İletişim
Z86E4312PSG - 8-Bit 12MHz OTP MCU | Zilog
Z86E4312PSG

Z86E4312PSG - 8-Bit 12MHz OTP MCU | Zilog

The Zilog Z86E4312PSG is an 8-bit Z8 OTP microcontroller with a 12 MHz maximum clock, 4 KB of one-time-programmable program memory, 236 bytes of data RAM, and 32 I/O lines in a 40-pin through-hole DIP package. It operates from 3.5 V to 5.5 V and is built with CMOS technology for compact control applications. Its 4K x 8 OTP architecture allows the application firmware to be programmed once, making the device suitable for fixed-function products where field updates are not required. A microcontroller is a programmable control IC that integrates a CPU core, memory, I/O ports, clock circuitry, and reset functions onto one semiconductor device. The Z8 belongs to the 8-bit microcontroller hierarchy and provides a compact platform for reading inputs, executing embedded control logic, and driving outputs. Compared with a discrete logic implementation, it reduces component count, simplifies firmware-based sequencing, and provides deterministic behavior within a defined operating range. Key features of the Z86E4312PSG include 12 MHz maximum operation, 4 KB OTP program memory, 236 bytes of RAM, 32 I/O lines, and a 40-DIP package. The 32 available I/O lines provide substantial connectivity for keypads, displays, sensors, relays, status indicators, and general-purpose digital control. The on-chip oscillator accepts a crystal, ceramic resonator, LC, RC, or external clock source, giving the designer flexibility in clocking and cost control. The device uses the Zilog Z8 core and CMOS process technology. OTP program memory removes the need for a separate nonvolatile memory component, while internal RAM supports stack, variable, and working-data requirements. Because program memory cannot be rewritten after programming, designers should validate firmware and the complete production programming procedure before committing a device population to an assembly line. Typical uses include appliance controllers, small motor-control boards, keyboard and panel interfaces, lighting controllers, industrial sequence modules, and dedicated embedded-control products. The 40-pin through-hole package is particularly convenient for prototypes, through-hole assembly, and designs where a socketed or manually serviced controller is preferred. The broad I/O count also suits designs that combine several discrete sensors and actuators around one central controller. When laying out a board, place the clock components and decoupling capacitors close to their associated pins and route sensitive oscillator signals away from high-current switching nodes. Confirm that the selected oscillator source satisfies the device timing requirements and validate the complete firmware with the final clock configuration. Because the memory is one-time programmable, treat firmware validation and programming as production-gating steps rather than routine board-test activities.

RFQ İletişim
Z86E4312VSG - 8-Bit 12MHz 4KB OTP Z8 MCU, 44-LCC | Zilog
Z86E4312VSG

Z86E4312VSG - 8-Bit 12MHz 4KB OTP Z8 MCU, 44-LCC | Zilog

The Zilog Z86E4312VSG is an 8-bit Z8 Z8 series microcontroller with a 12 MHz maximum clock frequency and 4 KB (4K x 8) of one-time-programmable flash program memory, packaged in a 44-pin J-lead plastic leaded chip carrier (44-LCC) surface-mount package. It is a compact 8-bit MCU suited to cost-sensitive control, measurement and appliance-type products. A microcontroller is a single-chip computer that integrates a CPU core, program memory, data memory, timers, serial ports and I/O pins on one die. The Z8 family from Zilog targets embedded control applications where a small, low-cost device must sequence relays, read sensors, drive displays and manage simple communication links. Within the broader semiconductor hierarchy, this device belongs to the microcontroller -> 8-bit MCU -> embedded controller class, and to the power-and-control tier of the device tree rather than to analog or power-semiconductor segments. Key features of this device include 32 configurable I/O lines, an 8-bit internal data bus, and a 4 KB user program area implemented as OTP, meaning the application code is written once and cannot be erased or re-programmed. Supply voltage operation spans 3.5 V to 5.5 V, so the part fits both 5 V legacy systems and 3.3 V-only designs at the lower end of the range. The device also includes an on-chip oscillator, timers and serial communication resources that reduce the external component count of a typical controller board. Technically, the Z86E4312 sits in the Zilog Z86E4x12 sub-family, which pairs a 12 MHz core with a 4 KB OTP memory map. Because program memory is mask-programmable OTP rather than flash, designers must finalize firmware before production and cannot apply field updates through a bootloader, which is the central architectural trade-off of this family. Industrial temperature grading of 0 degrees C to +70 degrees C is specified for the VSG ordering code, and the part is delivered in a surface-mount 44-LCC package that is directly soldered to the board rather than socketed. Typical uses include building-block controller boards, motor and relay sequencers, security keypad scanners, small instrumentation front panels, temperature-control loops in appliances, and LED signage drivers. Because the device provides 32 I/O pins, one Z86E4312 can replace several discrete logic ICs and a separate driver array in a compact enclosure. When laying out the board, route the 44-LCC pads on a compatible PLCC footprint, provide decoupling close to the supply pins, and keep the OTP programming interface accessible until the code is finalized. Also note that OTP parts are ordered against a fixed firmware image, so schedule programming and mask ordering early in the development cycle. This page consolidates the device characteristics, package and mounting details, drop-in replacement options within the same 44-LCC footprint, and practical design guidance so that a design team can decide quickly whether the Z86E4312VSG fits the control task and how to qualify an alternative if sourcing needs change.

RFQ İletişim
Z86E4412ASG - 8-Bit 12MHz 16KB OTP MCU | Zilog
Z86E4412ASG

Z86E4412ASG - 8-Bit 12MHz 16KB OTP MCU | Zilog

The Zilog Z86E4412ASG is an 8-bit Z8 microcontroller operating at 12 MHz with 16 KB of one-time-programmable memory in a 44-pin LQFP package measuring 10 mm by 10 mm. Its operating supply range is 3.5 V to 5.5 V, making it suitable for embedded controls that require a compact, nonvolatile program-memory architecture. A microcontroller is an integrated circuit that combines a processor core, program memory, data memory, and peripheral functions into one device. Within the product hierarchy, the Z86E4412ASG is a microcontroller IC, a member of the Z8 family, and a general-purpose embedded controller. It executes firmware stored in OTP memory and can be used to monitor inputs, control outputs, and coordinate system behavior without external program-memory devices. The principal specifications are a maximum clock frequency of 12 MHz, 16 KB of OTP program memory organized as 16K by 8 bits, a 3.5 V to 5.5 V supply range, and a 44-pin LQFP package. The product listing also identifies 236 bytes of additional memory and a 32-pin count associated with the device interface. These characteristics position the part for compact embedded designs where moderate processing speed and one-time field programming are more important than large flash-memory capacity. The Z86E4412ASG belongs to the Zilog Z8 family of 8-bit controllers. One-time-programmable memory allows firmware to be fixed during manufacturing or deployment, providing a stable control implementation that cannot be rewritten through the normal programming interface. The 10 mm by 10 mm LQFP footprint also exposes a substantial number of external connections compared with smaller surface-mount packages, supporting a broader selection of peripherals and mixed-signal interfaces. Typical applications include appliance control, industrial sequence controllers, motor and relay interfaces, metering equipment, and compact embedded systems with human-machine interfaces. A 12 MHz clock provides sufficient execution bandwidth for supervisory control loops, while the 3.5 V to 5.5 V range supports common industrial and embedded supply systems. Before circuit implementation, confirm the complete pin assignments, peripheral availability, electrical limits, and programming procedure in the Zilog datasheet. The 44-pin package requires careful decoupling, adequate ground connectivity, and signal-routing discipline to prevent switching noise or supply transients from affecting embedded control behavior. This page organizes the verified device identity, package characteristics, sourcing information, application guidance, and design checks needed to evaluate the Z86E4412ASG. It also distinguishes documented facts from parameters that should be confirmed from the manufacturer documentation before schematic release or PCB layout approval.

RFQ İletişim
Z86E4412FSC - 8-Bit 12MHz Z8 Microcontroller | Zilog
Z86E4412FSC

Z86E4412FSC - 8-Bit 12MHz Z8 Microcontroller | Zilog

The Zilog Z86E4412FSC is an 8-bit Z8 microcontroller operating at up to 12 MHz with 16 KB of one-time-programmable memory in the FSC package configuration. It belongs to Zilog’s Z86E4412 microcontroller family and is intended for embedded control applications that require deterministic peripheral control, compact embedded logic, and programmable nonvolatile code storage. The FSC ordering code identifies the lead-free component variant associated with the Z86E4412 family. A microcontroller is a semiconductor device that integrates a processor core, memory, and peripheral interfaces onto one integrated circuit. Within the product hierarchy, the Z86E4412FSC is an 8-bit microcontroller, an embedded processor, a programmable controller, and a member of the broader semiconductor category. Its one-time-programmable memory is intended for applications where firmware is written during manufacturing or deployment and does not need subsequent field reprogramming. The principal published characteristics include an 8-bit processing architecture, a 12 MHz maximum operating frequency, and 16 KB of OTP program memory. These figures position the device for compact control tasks such as appliance logic, industrial modules, interface controllers, and dedicated embedded subsystems. The one-time-programmable architecture can also help prevent unauthorized firmware changes after production, although field updates require a different programmable-memory strategy. The Z8 architecture combines the processor core with integrated peripherals intended to reduce external component count in embedded designs. At 12 MHz, the device provides a defined execution-rate ceiling for control-loop timing, serial-interface handling, and state-machine operation. Because the clock rating is stated as a maximum frequency rather than a guaranteed performance across every peripheral condition, designers should review the manufacturer datasheet for oscillator, reset, timing, and electrical limits before fixing system timing margins. Typical uses include low-cost embedded controllers, sensor-conditioning systems, motor or actuator control, simple serial bridges, and compact household or industrial modules. One-time-programmable memory is particularly appropriate for high-volume products whose firmware is fixed during manufacturing, such as dedicated appliance controllers and fixed-function industrial interfaces. The device can also serve as a logic-management hub when a system needs more control capability than discrete logic but less processing complexity than a general-purpose application processor. PCB planning should prioritize the exact package drawing, exposed connections, pin multiplexing, and recommended decoupling layout. The Z86E4412FSC requires the correct oscillator, reset, power, programming, and decoupling arrangements to operate reliably. Verify the complete pin description table and application circuit in the manufacturer datasheet before assigning every package terminal or routing high-speed signals. This page combines the verified 8-bit architecture, 12 MHz operating frequency, and 16 KB OTP memory rating with practical sourcing guidance, same-family replacement analysis, and engineering-focused application notes. It is intended to help engineers identify fit, assess programming constraints, plan layouts, and compare candidate devices without overlooking the distinctions between MCU architectures and package variants.

RFQ İletişim
Z86E4412PSG - 8-Bit 12MHz 16KB OTP MCU | Zilog
Z86E4412PSG

Z86E4412PSG - 8-Bit 12MHz 16KB OTP MCU | Zilog

Zilog Z86E4412PSG is an 8-bit Z8 embedded microcontroller with a 12MHz core, 16KB of one-time-programmable program memory, and 236 bytes of RAM in a 40-pin PDIP package. The device integrates Power-On Reset, a Watchdog Timer, and EBI/EMI connectivity, making it suitable for cost-sensitive embedded control systems that require deterministic peripheral access and compact code storage. A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals on one semiconductor die. The Z8 MCU family belongs to the broader embedded-controller hierarchy, where an 8-bit MCU provides efficient control for sensors, actuators, human-interface circuits, and industrial equipment. Unlike field-programmable Flash memory, the Z86E4412PSG uses OTP memory, so its application program is permanently committed during device programming. Key features include a 12MHz operating frequency, 16K × 8 organization for the 16KB OTP program memory, and 236 × 8 bytes of RAM. The integrated Power-On Reset helps establish a known initial controller state, while the Watchdog Timer provides a mechanism for recovering from stalled software execution. EBI/EMI expands the available external interface resources for communicating with additional memory or peripheral devices. The Z86E4412PSG uses an 8-bit architecture optimized for embedded control rather than high-throughput computation. Its 12MHz clock provides the execution rate for supervisory loops, status monitoring, and basic user-interface tasks. The 236-byte RAM supports working variables and stack operations, although complex buffering or protocol stacks may require an external memory device connected through the external bus interface. Typical uses include industrial control panels, building equipment, security and access peripherals, appliance controllers, motor-control interfaces, and compact embedded sensing systems. The 40-pin PDIP package is particularly useful for prototypes, through-hole industrial assemblies, and designs where a socketed controller simplifies replacement or inspection. The primary design consideration is OTP programming. Engineers should validate the complete firmware and all configuration bytes before programming because OTP memory cannot be rewritten, and they should verify external-bus timing and peripheral assignments against the manufacturer datasheet. Supply voltage, pin-specific limits, oscillator requirements, and programming procedures are not available in the supplied source excerpts and must be confirmed from the manufacturer datasheet. This page consolidates verified distributor and manufacturer-related source information, compares the available documented substitute, and identifies missing electrical data explicitly. It is intended to support engineering selection while preventing unverified voltage, pinout, pricing, and lifecycle assumptions from being presented as facts.

RFQ İletişim
Z86E4412VSG - 12MHz 16KB OTP 8-Bit MCU | Zilog | PLCC-44
Z86E4412VSG

Z86E4412VSG - 12MHz 16KB OTP 8-Bit MCU | Zilog | PLCC-44

Zilog Z86E4412VSG is an 8-bit Z8 microcontroller with a 12 MHz maximum operating frequency, 16 KB of one-time-programmable program memory, 236 bytes of RAM, and 32 general-purpose I/O pins in a 44-pin PLCC package. It operates from 3.5 V to 5.5 V and includes Power-On Reset and Watchdog Timer peripherals. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working memory, and peripherals into one device. The Z8 family belongs to the broader embedded-controller hierarchy: Z8 core, 8-bit microcontroller, embedded controller, and finally a semiconductor used to implement dedicated electronic control systems. Its compact instruction set and integrated resources are suited to controllers that must coordinate sensors, switches, communications, and actuators without requiring a separate external processor. The Z86E4412VSG combines 16 KB of OTP program storage with 236 x 8 bytes of RAM, giving embedded firmware room for fixed control code and working variables. Its 8-bit architecture is optimized for byte-oriented data handling, while the 12 MHz operating rate supports time-sensitive input sampling and control-loop execution. A 32-pin GPIO complement allows the device to connect directly to digital interfaces, indicator circuits, and discrete control signals. Operation across a 3.5 V to 5.5 V supply range permits use in both 5 V and lower-voltage-compatible systems, subject to individual peripheral and I/O requirements. The integrated Power-On Reset helps establish a known startup state, while the Watchdog Timer can help recover a controller that stops responding. Because program memory is one-time-programmable, the device is intended for products where a finished program is not revised after production programming. Typical uses include industrial sequence controllers, keypad interfaces, relay-control modules, simple serial-interface equipment, motor-control logic, and embedded products requiring 32 digital I/O lines. The 44-pin PLCC package also fits leaded PCB layouts that may not be compatible with modern fine-pitch surface-mount packages. Designers should confirm all peripheral multiplexing, timing, and electrical limits against the manufacturer datasheet before releasing a production design. A key design consideration is the one-time-programmable memory architecture. Firmware must be fully validated before device programming because later corrections generally require a new physical device. Board design should also preserve every required Z8 controller signal and provide suitable bypassing near the power pins. The 0 °C to +70 °C commercial temperature range should be checked against the intended enclosure, ambient temperature, and manufacturing conditions. This page organizes the principal Z86E4412VSG characteristics, practical application context, verified pin-compatible family alternatives, and engineering selection guidance. It is intended to help engineers identify whether the 12 MHz Z8 MCU, OTP memory capacity, GPIO count, voltage range, and legacy PLCC packaging fit a control-module design.

RFQ İletişim
Z86E6116ASG - 16MHz 8-Bit Z8 MCU, 16KB OTP, UART | Zilog
Z86E6116ASG

Z86E6116ASG - 16MHz 8-Bit Z8 MCU, 16KB OTP, UART | Zilog

The Zilog Z86E6116ASG is an 8-bit Z8 single-chip microcontroller with a 16 MHz clock, 16 KB (16K x 8) one-time-programmable EPROM and 236 bytes of general-purpose RAM, supplied in a 44-pin LQFP (10 x 10 mm) package. A microcontroller (MCU) is a self-contained computer on a single die, combining a CPU core, non-volatile program memory, data RAM, and peripherals such as timers and serial ports. Within the Zilog portfolio the device belongs to the Z8 family, which sits under the broader 8-bit microcontroller class alongside 8051-derivative devices. Z8 parts add on-chip oscillators, watchdogs, UARTs and brownout detection in a compact low-cost package, making them typical choices for appliance controls, meters and simple consumer equipment. Key features of this device include a 16 MHz internal oscillator with 16 KB of OTP program memory, 236 bytes of general-purpose RAM for stack, variables and working buffers, and an on-chip UART for serial debug or communication links. The operating supply range is 4.5 V to 5.5 V, and the specified temperature range is 0 C to +70 C, identifying the part as a commercial-grade (C) device. The 44-LQFP package offers a 10 mm x 10 mm body with 0.5 mm lead pitch and a 1.0 mm stand-off height, which keeps the footprint compatible with standard surface-mount assembly and repair flows. Architecturally, the Z8 core is an enhanced 8-bit design with a multi-source interrupt controller, programmable I/O ports, and on-chip peripherals that reduce external component count. Because the Z86E61xx devices are EPROM versions of the Z86C61 and Z86C63 devices, existing 8051-era designs can be adapted by changing only the device type and programmer, while keeping the same board-level pin arrangement. Typical applications include small appliance and white-goods control panels, HVAC and thermostat modules, simple serial-connected sensor hubs, LED signage controllers, and battery or mains powered instrumentation with a serial interface to a host processor. The 236-byte RAM budget suits firmware that performs state-machine control, key scanning, and periodic sensor polling rather than heavy protocol stacks. One key design consideration is OTP memory: the 16 KB program array can be written only once, so development normally proceeds on the mask-programmable or EPROM equivalents, and the production board layout should be frozen before the OTP parts are ordered. Keep 0.1 uF bypass decoupling close to VDD and VSS pins and route the oscillator pins away from switching nodes. This page combines distributor availability and package details with pin-compatible Z8 family members, application scenarios, and practical design notes that go beyond a single datasheet download, helping engineers select the correct Zilog MCU and plan sourcing in one place.

RFQ İletişim
Z86E6116FSC - 16MHz 8-Bit OTP Microcontroller | Zilog
Z86E6116FSC

Z86E6116FSC - 16MHz 8-Bit OTP Microcontroller | Zilog

The Zilog Z86E6116FSC is an 8-bit Z8 microcontroller operating at 16 MHz, with 16 KB of one-time-programmable program memory, 236 bytes of RAM, UART capability, and a 44-pin LQFP package measuring 10 mm by 10 mm. Its OTP program memory makes the device suitable for compact production designs in which the finished controller code must not be reprogrammed. An 8-bit microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals on one chip. Within the product hierarchy, this device belongs to the Z8 family of 8-bit microcontrollers and belongs broadly to the integrated-circuit and embedded-controller categories. Z8 devices combine a compact processor architecture with dedicated I/O and serial-interface resources for cost-sensitive embedded control. The verified device data identifies a 16 MHz operating clock, 16 KB of OTP program memory organized as 16K by 8 bits, and 236 bytes of general-purpose RAM. The listing also identifies a UART interface, making the MCU suitable for designs that need a simple serial communications channel. Its 44-LQFP package provides a higher pin count than a basic 8-bit controller and supports more external connections in a surface-mount production PCB. The Z8 architecture is designed for embedded-control workloads where modest processing throughput is sufficient. Program storage is one-time-programmable rather than mask-programmable or electrically reprogrammable, which can simplify production control by preventing accidental changes after programming. The 16 MHz operating rate supports time-based control, input scanning, state-machine logic, and communication routines without requiring a higher-bit-class processor. Typical uses include appliance controllers, small industrial automation modules, instrument panels, communication interfaces, and embedded peripheral controllers. The UART is particularly relevant where an external host computer, display, sensor interface, or service connector uses a serial link. Engineers should confirm the exact peripheral pin multiplexing, electrical limits, timing characteristics, and programming procedure against the manufacturer datasheet before finalizing a PCB or firmware. One important design consideration is that OTP memory cannot be revised after programming. Firmware validation, programming-file control, and assembly-line traceability therefore need to be planned before deployment. Supply voltage, clock tolerances, I/O limits, reset behavior, and absolute maximum ratings are not present in the supplied excerpts and must be verified in the complete manufacturer datasheet. This product page consolidates the verified distributor specifications, package information, sourcing links, family relationships, and engineering cautions for Z86E6116FSC. It also distinguishes confirmed technical facts from unavailable details and avoids presenting unverified pricing, pin assignments, or drop-in replacements as authoritative.

RFQ İletişim
Z86E6116FSG - 16MHz Z8 MCU, 16KB OTP | Zilog
Z86E6116FSG

Z86E6116FSG - 16MHz Z8 MCU, 16KB OTP | Zilog

Zilog Z86E6116FSG is an 8-bit Z8 Z8-series microcontroller operating at 16MHz, with 16KB of one-time-programmable program memory, 236 bytes of RAM, and 32 general-purpose I/O pins in a 44-LQFP 10x10 mm surface-mount package. The device also includes a UART/USART for serial connectivity, making it suitable for compact embedded-control and communications designs. An 8-bit microcontroller is a programmable integrated circuit that combines a processor core, program memory, data memory, and peripheral interfaces on one chip. The Z86E6116FSG belongs to the Z8 family, where its compact instruction set, dedicated I/O resources, and integrated serial interface support deterministic control of embedded products. Its 16MHz operating speed provides the timing capability needed for protocol handling, input scanning, and actuator control. The principal feature set includes 16KB of OTP program memory, 236 x 8 bytes of RAM, 32 general-purpose I/O pins, and one UART/USART interface. OTP memory permits a finished program to be written permanently, which can help prevent accidental firmware changes in production equipment. The 32 I/O pins provide substantial host connectivity for switches, indicators, sensors, and control signals without requiring a separate external I/O expander. Its 5V operating context and 16MHz clock position the device as a compact embedded-control solution. The UART/USART allows a controller to exchange framed serial data with another processor, transceiver, or service interface, while the general-purpose I/O pins handle discrete peripherals. Since program memory is OTP rather than reprogrammable Flash, firmware development and update strategy must account for the permanent nature of the programmed contents. Typical applications include serial-controlled instrumentation, industrial control modules, keypad and display interfaces, programmable logic controllers, building-control endpoints, and compact communications equipment. The combination of 32 I/O pins, serial connectivity, and 16KB of program storage is useful when the design needs a dedicated controller rather than a high-performance processor. PCB design should account for all 44 package leads, correct decoupling near the supply pins, and clean routing of the 16MHz clock and serial signals. The 10x10 mm LQFP footprint is relatively compact, but its fine-pitch leads still require careful fanout, solder mask design, and inspection under magnification. This product page consolidates the device identity, package details, technical constraints, sourcing workflow, and engineering guidance into one reference. It also distinguishes verified drop-in replacements from merely similar microcontrollers, helping designers avoid changes that would require new PCB artwork, firmware revision, or peripheral revalidation.

RFQ İletişim
Z86E6116PSG - 8-Bit 16MHz 16KB OTP MCU | Zilog
Z86E6116PSG

Z86E6116PSG - 8-Bit 16MHz 16KB OTP MCU | Zilog

The Zilog Z86E6116PSG is an 8-bit Z8 microcontroller operating at 16 MHz with 16 KB of one-time-programmable memory in a 40-pin DIP package. It is designed for embedded control applications that require deterministic serial communication, compact logic integration, and a straightforward through-hole footprint. The device operates from a 4.5 V to 5.5 V supply and includes a UART, making it suitable for serial control panels, industrial controllers, instrument interfaces, and embedded automation modules. A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, and peripheral interfaces into one device. The Z8 belongs to Zilog's 8-bit microcontroller family, positioned between simple fixed-function logic controllers and more complex 16-bit or 32-bit processors. Its 16 KB OTP program memory allows firmware to be programmed once for stable production configurations without external program-memory components. The Z86E6116PSG combines an 8-bit architecture with a 16 MHz clock, 16 KB of OTP memory, and a UART interface. The 40-pin DIP package supports conventional through-hole assembly and breadboard or prototype-board prototyping. A 4.5 V to 5.5 V operating range covers standard 5 V control systems, while the UART permits connection to host computers, sensors, display controllers, and other digital equipment. The Z8 architecture is intended for embedded control rather than high-throughput computing. Program and data storage operate from a compact memory arrangement that keeps external component count low. The UART provides a practical communications path for configuration, telemetry, and command processing, while the 16 MHz clock supports predictable execution of real-time control loops in cost-sensitive designs. Typical uses include industrial control panels, instrumentation interfaces, keypad and display controllers, serial data acquisition modules, appliance controls, and small automation subsystems. The DIP package is especially useful for designs assembled through holes or assembled with conventional leaded components rather than fine-pitch surface-mount techniques. When designing around the Z86E6116PSG, confirm the oscillator arrangement, reset behavior, UART levels, and port-drive requirements against the manufacturer datasheet. Validate firmware with the intended 5 V supply tolerance and keep the board layout within the package's thermal and electrical recommendations. This page also organizes package details, interface specifications, replacement considerations, and application guidance for faster component selection.

RFQ İletişim
Z86E6116VSG - 8-Bit 16MHz 16KB OTP MCU | Zilog
Z86E6116VSG

Z86E6116VSG - 8-Bit 16MHz 16KB OTP MCU | Zilog

The Zilog Z86E6116VSG is an 8-bit Z8 microcontroller operating at up to 16 MHz with 16 KB of one-time-programmable flash memory and a UART interface, housed in a 44-pin PLCC package. It is designed for cost-sensitive embedded control applications that require deterministic 8-bit processing, on-chip nonvolatile program storage, and serial communications without an external EEPROM. A microcontroller is a semiconductor device that integrates a CPU core, program memory, data memory, and peripheral functions into one package. The Z86E6116VSG belongs to the Z8 microcontroller family, a hierarchy of 8-bit embedded controllers positioned between simple logic controllers and higher-performance 32-bit microcontrollers. Its integrated UART allows the controller to communicate with sensors, displays, transceivers, or host systems over serial interfaces. Key characteristics include a 16 MHz maximum operating frequency, 16 KB of OTP program memory, 8-bit processing, a UART peripheral, and a supply voltage range of 4.5 V to 5.5 V. The commercial temperature grade covers 0 °C to +70 °C, making the device suitable for indoor instruments, industrial controls, appliance controllers, and communication modules that operate within that range. The device uses one-time-programmable memory, so firmware is written after programming and cannot be updated in the field. This architecture is useful for products whose firmware and configuration are fixed at manufacturing, including dedicated controllers, interface modules, metering equipment, and embedded communication products. Designers should also account for the fact that OTP devices cannot be reflashed during production corrections. Typical applications include serial interface controllers, automated test equipment, instrumentation, industrial keypad panels, motor-control support circuits, and embedded UART bridge products. Its 44-pin PLCC package provides a higher pin count than small-outline packages, supporting legacy peripheral routing and through-hole or socket-compatible assembly strategies where appropriate. When designing a PCB around the Z86E6116VSG, verify the PLCC footprint, pin assignments, oscillator requirements, and reset behavior against the Zilog datasheet. Because OTP memory cannot be revised, validate the complete firmware image and production programming procedure before committing the design to volume production. This page organizes the controller's verified electrical, memory, package, and environmental characteristics together with application guidance, design cautions, and cross-reference information. It is intended to help engineers evaluate whether the Z86E6116VSG architecture, memory strategy, package, and operating limits fit a specific embedded control design.

RFQ İletişim
Z86E6316ASG - 8-Bit 16MHz 32KB MCU | Zilog
Z86E6316ASG

Z86E6316ASG - 8-Bit 16MHz 32KB MCU | Zilog

The Zilog Z86E6316ASG is an 8-bit Z8 CISC microcontroller operating at 16 MHz, with 32 KB of one-time-programmable memory and UART connectivity, packaged in a 44-LQFP 10 mm by 10 mm surface-mount package. The Z86E6316ASG combines a compact 8-bit architecture, embedded nonvolatile program memory, and serial communications in a device intended for embedded control systems. An 8-bit microcontroller is a compact embedded-control IC that executes instructions using an 8-bit data path. Within the semiconductor hierarchy, a microcontroller belongs to the embedded processor family and integrates a CPU core, program memory, data memory, peripherals, and I/O on one die. The Z8 family provides the base architecture for the Z86E6316ASG, while OTP memory allows firmware to be programmed once for stable production operation without external program-memory components. The principal identified specifications include an 8-bit processor, a 16 MHz operating frequency, 32 KB organized as 32K by 8 bytes of OTP memory, and a 5 V operating condition. The integrated UART supports serial communication with sensors, human-interface equipment, data converters, and other embedded controllers. Its 44-LQFP package provides 44 external lead positions and a 10 mm by 10 mm footprint suitable for compact embedded-control boards. The Z86E6316ASG belongs to the Zilog Z86 device family and uses the Z8 CISC architecture. Its one-time-programmable memory is intended for permanent application firmware, reducing the board-level component count compared with a system that uses an external programmed memory device. Because this is an OTP device, firmware changes after programming require a different device rather than an in-circuit rewrite, which should be considered before committing the design to production. Typical applications include industrial serial controllers, instrument interfaces, appliance-control modules, keypad and display controllers, and compact embedded automation nodes. The 16 MHz clock and UART are particularly useful for supervisory tasks such as collecting switch or sensor states, formatting serial data, and controlling peripheral functions. The 44-LQFP package also offers more I/O than smaller low-pin-count microcontroller packages while retaining a conventional leaded surface-mount footprint. Hardware design should follow the pin-description and recommended decoupling information in the Zilog manufacturer datasheet. Place the supply bypass capacitor close to the device, route oscillator and reset signals away from high-current switching nodes, and confirm the program voltage and OTP programming procedure before manufacturing. Designers should also verify that all 44 package leads are assigned because the complete public pin table is not included in this page's structured dataset. This product page consolidates the verified device identity, package information, lifecycle status, source listings, application guidance, and a qualified replacement candidate into one engineering reference. It also highlights the distinctions that matter when evaluating an OTP MCU replacement, particularly firmware programmability, package compatibility, UART availability, clock rate, and memory capacity.

RFQ İletişim