انٹیگریٹڈ سرکٹس

ذیلی زمرے

📁 ADC/DAC 3,100+ پروڈکٹس 📁 ایمپلیفائر ICs 1,700+ پروڈکٹس 📁 آڈیو کوڈیکس 18 پروڈکٹس 📁 آڈیو ICs 2 پروڈکٹس 📁 گھڑی اور وقت بندی 640+ پروڈکٹس 📁 Comparator ICs 1 پروڈکٹس 📁 DSP 1,100+ پروڈکٹس 📁 ڈیٹا ایکوزیشن ICs 2 پروڈکٹس 📁 ڈیجیٹل پوٹینشیومیٹرز 4 پروڈکٹس 📁 ڈسپلے ڈرائیورز اور کنٹرولرز 1 پروڈکٹس 📁 FPGA اور CPLD 7,100+ پروڈکٹس 📁 انٹرفیس ICs 3,100+ پروڈکٹس 📁 LED ڈرائیورز 1 پروڈکٹس 📁 لاجک ICs 450+ پروڈکٹس 📁 میموری ICs 870+ پروڈکٹس 📁 مائیکرو کنٹرولرز 20,000+ پروڈکٹس 📁 مائیکرو پروسیسرز 4 پروڈکٹس 📁 موٹر ڈرائیورز 1 پروڈکٹس 📁 دیگر 1 پروڈکٹس 📁 سینسر اور ڈیٹیکٹر انٹرفیسز 1 پروڈکٹس 📁 اسپیشلائزڈ ICs 15 پروڈکٹس 📁 ویڈیو ICs 13 پروڈکٹس

مصنوعات (38,000+)

SI4133T-BM - 1.8 GHz Frequency Synthesizer | Silicon Labs
SI4133T-BM

SI4133T-BM - 1.8 GHz Frequency Synthesizer | Silicon Labs

The Silicon Labs SI4133T-BM is a 1.8 GHz frequency synthesizer IC with a 2.7 V to 3 V supply range, a 1:2 input-to-output ratio, and a 28-VFQFN exposed-pad package measuring 5 mm by 5 mm. It belongs to the Aero series and is intended for compact systems requiring an integrated phase-locked-loop frequency synthesizer rather than a collection of discrete timing and synthesis components. The verified distributor listings identify the SI4133T-BM as a single-circuit RF frequency-synthesizer device with an exposed thermal pad. A frequency synthesizer is a timing and control IC that generates an output frequency from a stable reference. Within the broader semiconductor hierarchy, the SI4133T-BM is a PLL-based clock generator and frequency synthesizer, belonging to the clock and timing IC family used in RF, communications, test equipment, and digital systems. An integrated PLL and voltage-controlled oscillator can simplify frequency planning while reducing the component count required by a discrete reference, divider, loop filter, and oscillator arrangement. The verified feature set identifies a maximum frequency of 1.8 GHz, a 2.7 V to 3 V operating supply, and an input-to-output ratio of 1:2. These parameters place the device in applications where a relatively high-frequency synthesized reference is needed without the higher supply voltage associated with many larger RF synthesizer families. The 28-VFQFN package also supports compact RF board layouts, although its exposed pad requires deliberate thermal and layout treatment. The SI4133T-BM integrates the core frequency-synthesis function into one package. Its 1:2 ratio identifies a divided synthesis architecture, but the supplied source material does not expose the complete divider table, reference-frequency range, phase-noise values, lock-time data, or channel spacing. Those details must therefore be confirmed in the manufacturer datasheet before finalizing a PLL loop filter, reference selection, or production release. Typical uses include RF transceiver clocking, local-oscillator generation, communications test equipment, wireless infrastructure, and embedded frequency-reference subsystems. In these systems, the 1.8 GHz ceiling provides a defined operating envelope, while the low 2.7 V to 3 V supply can simplify integration with adjacent digital or RF circuitry. The 1:2 ratio is especially relevant when the downstream block requires a related clock or intermediate frequency. Designers should place input, output, supply, and ground connections according to the manufacturer’s reference layout, with a continuous ground plane beneath the exposed pad. Because loop bandwidth depends on phase noise, reference quality, divider settings, and filtering, the available 1.8 GHz, 1:2, and 2.7 V to 3 V specifications are not sufficient to select final capacitors or predict lock performance. This page consolidates verified distributor attributes, pricing status, package details, and practical substitution constraints. It also distinguishes a documented same-package candidate from package-only order codes and unrelated devices, helping engineers compare alternatives without mistaking a different footprint for a true PCB drop-in replacement.

RFQ رابطہ
SI4133T-GM - 1.8GHz Frequency Synthesizer | Silicon Labs
SI4133T-GM

SI4133T-GM - 1.8GHz Frequency Synthesizer | Silicon Labs

The Silicon Labs SI4133T-GM is a single-circuit frequency synthesizer IC with an operating frequency specified up to 1.8 GHz, supplied in a 28-pin VFQFN exposed-pad package measuring 5 mm by 5 mm. The verified distributor data identifies the device as a clock generator, PLL, and frequency-synthesizer component with a 2.7 V to 3 V supply-voltage range. These headline characteristics place the part in the clock-and-timing IC hierarchy, where it can generate or distribute a controlled frequency for dependent digital, communication, or test circuitry. A frequency synthesizer is a clock-and-timing IC that derives one or more stable output frequencies from a controlled internal reference and phase-locked loop. Compared with a fixed-frequency oscillator, a synthesizer allows the operating frequency to be programmed over a defined range. Compared with a general-purpose clock generator, the SI4133T-GM is specifically categorized as a frequency synthesizer IC. Its exact architecture, reference frequency, output configuration, tuning range, phase-noise characteristics, and programming interface remain unavailable in the supplied source data. The SI4133T-GM supports a 2.7 V to 3 V supply range and is specified for operation up to 1.8 GHz. The verified sources list one frequency-synthesizer circuit in the package. Its 28-VFQFN exposed-pad construction provides 28 package pins and an exposed thermal pad for heat transfer into the PCB. The exposed pad also requires careful land-pattern and assembly design so that thermal and electrical performance is not degraded by an inadequate ground or thermal connection. A key engineering consideration is that the 2.7 V to 3 V operating range leaves less supply-voltage margin than many mixed-signal or legacy clock systems. A design should therefore verify that every associated digital interface, reference supply, and downstream load remains compatible with this range. The supplied evidence does not specify input or output logic thresholds, decoupling requirements, reference sensitivity, PLL loop bandwidth, lock time, or output drive capability; those values must be confirmed in the manufacturer datasheet before schematic release. Typical design roles include local clock generation, PLL-based frequency translation, communication-module clocking, test-and-measurement clock distribution, and digital-system reference generation. In each case, the device's stated 1.8 GHz upper frequency and integrated frequency-synthesizer function make it a candidate, but selection requires confirmation of the required output count, frequency range, reference input, modulation requirements, and channel-to-channel isolation. Those application-specific parameters are not contained in the verified snippets provided for this MPN. Designers should use the manufacturer's complete pinout and recommended land pattern rather than infer connections from the 28-pin package count. Input and output routing should be short, the exposed pad should have a full thermal-via array where recommended, and all supply bypass capacitors should be placed close to their associated pins. Because detailed decoupling values and pin functions are absent from the supplied evidence, their selection must remain open until the official datasheet is reviewed. This product record consolidates the verified 1.8 GHz frequency-synthesizer classification, 2.7 V to 3 V supply range, single-circuit configuration, and 28-VFQFN exposed-pad package into a concise engineering reference. It also distinguishes the confirmed SI4133T-BM comparison part from unverified replacement candidates, identifies every unavailable technical parameter explicitly, and avoids treating general cross-reference tools as proof of pin-compatible equivalence.

RFQ رابطہ
SI4134T-BM - 1.99 GHz PLL Frequency Synthesizer | Silicon Labs
SI4134T-BM

SI4134T-BM - 1.99 GHz PLL Frequency Synthesizer | Silicon Labs

The Silicon Labs SI4134T-BM is a frequency synthesizer integrated circuit with PLL architecture, clock input, clock output, and a maximum operating frequency of 1.99 GHz. It operates from a 2.7 V to 3 V supply in a 32-VFQFN exposed-pad package, providing a compact solution for clock generation and frequency multiplication in communications, test, and instrumentation systems. The device is identified as a single-circuit frequency synthesizer with a 1:2 input-to-output ratio. A frequency synthesizer is a clock-and-timing IC that uses a phase-locked loop to generate, divide, or multiply a reference frequency into a stable output clock. Within the broader semiconductor hierarchy, it belongs to the clock generator and PLL family, operating as a timing-management IC within communications and electronic-control systems. Its internal PLL enables frequency generation from a stable reference source, making it useful where a system requires precise, repeatable clocking rather than a free-running oscillator alone. Key verified features include a maximum frequency of 1.99 GHz, a 2.7 V to 3 V operating supply range, a clock input, a clock output, PLL operation, a 1:2 input-to-output ratio, and a differential output arrangement identified as No input and Yes output in the supplied distributor data. The 32-VFQFN exposed-pad package is designed for surface-mount assembly and supports compact implementation in RF and baseband circuits. The listed operating-temperature range is -20 °C to +85 °C. The SI4134T-BM is intended for RF and baseband circuit applications, data converters, transceivers, and other high-speed systems that require synthesized clocks. Its relatively low 2.7 V to 3 V supply range makes it suitable for systems built around low-voltage RF and mixed-signal architectures. The 1:2 ratio provides a straightforward multiplication function when the system reference is arranged for that relationship. When designing around this part, verify the complete pinout, reference-clock requirements, loop-filter component values, output-routing options, and exposed-pad land pattern against the manufacturer datasheet. Because the supplied web data does not include the full pin assignments, reference frequency range, output drive, phase-noise limits, or recommended decoupling details, those values remain marked as data-needed rather than inferred. The exposed pad should be connected according to the manufacturer’s thermal and layout guidance.

RFQ رابطہ
SI4134T-GM - 1.99 GHz Dual Frequency Synthesizer | Silicon Labs
SI4134T-GM

SI4134T-GM - 1.99 GHz Dual Frequency Synthesizer | Silicon Labs

Silicon Labs SI4134T-GM is a dual-output frequency synthesizer IC with a maximum frequency of 1.99 GHz, a 2.7 V to 3 V supply range, and a 32-VFQFN exposed-pad package measuring 5 mm by 5 mm. It combines a dual synthesizer with a DCXO function in the AERO+ series, making it suitable for clock generation and PLL-based frequency multiplication in communication, test, and measurement equipment. A frequency synthesizer is a clock-and-timing IC that derives one or more stable output frequencies from a reference source. Its product hierarchy is frequency synthesizer → PLL synthesizer → clock generator → clock and timing IC → semiconductor. Unlike a simple crystal oscillator, an active frequency synthesizer supports programmable multiplication, phase adjustment, and integrated clock-generation functions within one package. The verified manufacturer and distributor data identify a maximum operating frequency of 1.99 GHz, a dual configuration, an input-to-output ratio of 1:2, and an integrated DCXO. These features make the SI4134T-GM useful where a system requires controlled high-frequency clocks derived from a lower-frequency reference. The exact divider settings, phase-noise values, temperature range, and output specifications are not present in the supplied verified data and therefore require confirmation from the manufacturer datasheet. The device operates from a 2.7 V to 3 V supply, placing it in the low-voltage domain of programmable logic and communication equipment. A dedicated analog supply arrangement is characteristic of clock-generator designs, but the supplied search results do not identify individual supply pins or recommended capacitor values. Those details should be taken directly from the SI4134 datasheet before schematic capture. Typical uses include RF and baseband transceiver clocking, data-converter clock generation, wireless communication modules, instrumentation, and test equipment. In these systems, the SI4134T-GM can provide multiple related clock outputs from a common reference while reducing the number of separate oscillators required. Its 1.99 GHz ceiling provides headroom for high-speed digital and RF signal chains. When designing a replacement board, preserve the 32-VFQFN exposed-pad land pattern and verify pin-to-pin assignments, supply sequencing, reference amplitude, loop-filter components, and output termination. A 5 mm by 5 mm package supports compact placement, but its exposed pad requires careful thermal and layout design. The supplied evidence identifies SI4134T-BM as a closely related same-package family member, while the verified SI4134T-BM cross-reference does not establish its complete electrical equivalence. This page consolidates verified distributor specifications, source links, same-family cross-reference information, and practical integration guidance. It separates confirmed facts from unavailable parameters, helping engineers evaluate the SI4134T-GM for clock-generation designs without treating unverified electrical details as guaranteed specifications.

RFQ رابطہ
SI4136-BM - 2.5 GHz RF Synthesizer | Silicon Labs | Wireless
SI4136-BM

SI4136-BM - 2.5 GHz RF Synthesizer | Silicon Labs | Wireless

Silicon Labs SI4136-BM is an integrated RF frequency synthesizer IC with a maximum operating frequency of 2.5 GHz, a 2.7 V to 3.6 V supply range, and a 28-VFQFN exposed-pad surface-mount package. Designed for wireless communications, the device combines three VCOs, loop filters, reference and VCO dividers, and phase detectors in one monolithic component. Its programmable divider and powerdown settings are controlled through a three-wire serial interface, reducing external RF infrastructure while supporting IF and RF synthesis. A frequency synthesizer is a clock-and-timing device that generates, multiplies, divides, and locks a reference signal to a selected output frequency. The SI4136 belongs to the PLL frequency-synthesizer and RF-synthesizer hierarchy, where a phase-locked loop steers an oscillator to maintain a controlled relationship between a stable reference and an RF output. This makes the device relevant to wireless transceivers, RF modems, frequency-agile communications equipment, and embedded RF systems rather than ordinary low-frequency clock distribution. The SI4136-BM combines three integrated VCOs with programmable dividers and phase detectors. This architecture allows the synthesizer to cover multiple RF conversion paths while centralizing frequency planning in a serial-programmable device. The verified component data identifies PLL operation, crystal input, clock output, one circuit, and support for divider and multiplier functions. The three-wire serial programming interface is important because it reduces the number of discrete control connections required by the system. The SI4136-BM is specified for a maximum frequency of 2.5 GHz and an operating supply range of 2.7 V to 3.6 V, making it suitable for compact RF systems whose supply architecture is already designed around low-voltage semiconductor rails. Its exposed pad provides a thermal and electrical connection to the PCB, but the required thermal-management details and exact pad-layout guidance must be taken from the manufacturer datasheet before layout release. The 28-VFQFN footprint is a surface-mount package intended for manufacturing reflow and automated assembly. Typical applications include wireless communication modules, RF front-end supporting ICs, IF/RF conversion chains, and industrial or consumer products requiring programmable frequency generation. In these systems, the synthesizer establishes a stable RF or intermediate-frequency reference while the surrounding transceiver handles signal mixing, modulation, filtering, and power amplification. Integration can reduce board area and assembly complexity, although system designers must still verify reference-noise requirements, loop-filter settings, startup behavior, and regulatory output requirements. Designers should preserve the exposed-pad copper connection, place supporting components according to the manufacturer’s reference layout, and keep sensitive RF and reference traces away from noisy switching nodes. Because the verified data does not provide the complete pin-level electrical table, pin names, oscillator tuning range, reference frequency, divider ratios, output characteristics, or recommended loop-filter values, those parameters require confirmation in the official datasheet. This page combines the verified product identity, package, supply, frequency, and sourcing information with practical design guidance without filling unavailable values with assumptions. This product-data summary distinguishes SI4136-BM from ordinary fixed-frequency oscillators by emphasizing its integrated VCOs, dividers, phase detectors, loop filters, and serial programming. For procurement, verify current manufacturer identity and lifecycle status with an authorized distributor because search results reference both Silicon Labs and Skyworks Solutions, and confirm the exact package, temperature range, and electrical configuration against the latest manufacturer documentation.

RFQ رابطہ
SI4136-BT - 2.5GHz RF Synthesizer with Integrated VCOs
SI4136-BT

SI4136-BT - 2.5GHz RF Synthesizer with Integrated VCOs

Silicon Labs SI4136-BT is an ISM RF frequency synthesizer IC with a maximum operating frequency of 2.5 GHz, three integrated VCOs, and a 24-pin TSSOP package. The device performs RF and IF synthesis for wireless communications and supports programmable divider and power-down settings through a three-wire serial interface. Its verified features include low phase noise, minimal external-component requirements, 5 uA standby current, and 25.7 mA typical supply current. A frequency synthesizer is a Clock & Timing IC that generates one or more stable, programmable output frequencies from a reference clock. An RF synthesizer combines a voltage-controlled oscillator, frequency dividers, phase detectors, loop filters, and control logic to support wireless transmitters and receivers. The SI4136 belongs to the broader clock-generation and timing hierarchy, where accurate frequency generation is essential for RF modulation, demodulation, channel selection, and local-oscillator requirements. The SI4136-BT integrates three VCOs, loop filters, varactors, resonators, reference and VCO dividers, and phase detectors. This integration reduces the external circuitry needed for an RF synthesis solution. Its 2.5 GHz maximum operating frequency makes it suitable for ISM wireless communication equipment operating within the supported RF range. The 24-TSSOP package is identified as approximately 4.40 mm wide by the distributor listing. Programming divider and power-down settings is handled through a three-wire serial interface, allowing the host controller to configure operating conditions during system startup or mode changes. The low phase-noise characteristic is relevant to receiver and transmitter designs where unwanted phase modulation can degrade signal quality. The 5 uA standby current supports low-power operating states, while the 25.7 mA typical supply current provides a basis for power-budget analysis. Typical applications include ISM-band wireless transceivers, RF front ends, wireless communications modules, local-oscillator generation, and communication boards requiring programmable RF or IF synthesis. System designers should account for reference-clock stability, supply decoupling, output routing, control-interface timing, and the device's package footprint during PCB layout. For a new design, validate the required output frequency, reference frequency, divider range, control protocol, supply voltage, and RF performance against the manufacturer datasheet before layout release. This page consolidates the verified distributor and manufacturer-linked information and clearly marks specifications that were not present in the supplied data rather than estimating them.

RFQ رابطہ
SI4136-F-BM - 2.5 GHz RF Synthesizer | Skyworks
SI4136-F-BM

SI4136-F-BM - 2.5 GHz RF Synthesizer | Skyworks

Skyworks Solutions, Inc. SI4136-F-BM is an ISM-band RF frequency synthesizer with a 2 MHz to 50 MHz reference input, up to 2500 MHz output, three integrated VCOs, integrated loop filters, varactors, and resonators, and a 28-pin QFN exposed-pad package. The device is designed for wireless communications systems requiring local RF and IF synthesis with minimal external components. An RF frequency synthesizer is a clock-and-timing semiconductor that generates programmable, phase-locked radio-frequency outputs from a stable reference. It belongs to the frequency synthesizer -> PLL/VCO -> clock generator and timer -> clock and timing IC -> semiconductor hierarchy. In a wireless transmitter or receiver, this function converts a fixed reference into the accurately controlled local oscillator used by mixers, modulators, demodulators, and transmit signal chains. The SI4136-F-BM integrates multiple VCOs, phase detectors, dividers, loop filters, varactors, and resonators. Its verified operating characteristics include a 2 MHz to 50 MHz input range, a maximum output frequency of 2500 MHz, a 5 µA standby current, and a 25.7 mA typical supply current. These characteristics support dual-band wireless designs while reducing board area and external-component count. The synthesizer architecture allows divider and power-down settings to be programmed through a three-wire serial interface. That serial control supports automatic frequency selection and operating-state management in software-defined radios, WLAN equipment, satellite-radio receivers, and other RF communications products. Its integrated implementation also helps reduce RF routing complexity compared with discrete oscillator and divider chains. Typical uses include WLAN terminals, ISM-band transceivers, satellite-radio equipment, RF1/RF2/IF synthesis, and wireless communications basebands. Designers should preserve adequate reference-signal integrity, follow the manufacturer's recommended grounding and decoupling layout, and verify loop-filter settings when changing channel plans or reference frequencies. The principal design trade-off is lifecycle rather than electrical function. The SI4136-F-BM is identified as not recommended for new designs, and the verified distributor data identifies SI4136-F-GM as the recommended replacement. New designs should therefore evaluate that successor, while existing assemblies can use the documented family relationship for orderly transition planning. This page combines verified manufacturer-family specifications, distributor lifecycle information, package details, replacement guidance, and engineering-oriented selection notes. It is intended to support procurement, cross-reference, PCB transition, and design-review decisions without presenting unsupported component parameters as confirmed facts.

RFQ رابطہ
SI4136-F-BT 2.5GHz RF Synthesizer | Skyworks Solutions
SI4136-F-BT

SI4136-F-BT 2.5GHz RF Synthesizer | Skyworks Solutions

Skyworks Solutions Inc. SI4136-F-BT is an ISM-band RF frequency synthesizer IC with integrated VCOs, specified for operation up to 2.5 GHz and supplied in a 24-pin TSSOP package measuring 4.40 mm wide. It combines programmable RF synthesis, integrated voltage-controlled oscillators, phase detectors, loop filters, reference dividers, and VCO dividers for wireless communication systems. The device uses a three-wire serial interface for divider, power-down, and operating-mode programming. A frequency synthesizer is a clock-and-timing IC that generates a stable, programmable output frequency from a fixed reference source. Within the broader signal-chain hierarchy, the SI4136 belongs to the RF synthesizer family, combines with phase-locked-loop and voltage-controlled-oscillator technologies, and ultimately supports wireless transmitter and receiver subsystems. Its integrated VCO architecture reduces the external frequency-generation component count compared with a discrete oscillator-and-divider implementation. The verified product listing identifies the SI4136-F-BT as a 2.5 GHz frequency synthesizer IC with one synthesis channel and a 24-TSSOP package. It also describes three integrated VCOs, loop filters, reference and VCO dividers, and phase detectors. These functions support programmable frequency generation for ISM wireless communications, where a stable reference clock can be converted into an RF carrier or intermediate-frequency signal. The 24-pin TSSOP package is surface mount and 4.40 mm wide, allowing reuse of compact wireless-control board layouts. Compared with larger leaded frequency-synthesizer packages, the surface-mount TSSOP reduces board footprint but requires careful assembly and exposed-trace thermal management. The three-wire serial control interface also allows an embedded controller to configure divider ratios, power-down behavior, and synthesizer settings. Typical uses include ISM wireless communications, WLAN-related radio equipment, satellite-radio signal generation, and other RF communication systems requiring a programmable local oscillator. The SI4136-F-BT can serve a transmitter channel, receiver down-conversion stage, or test and measurement equipment when a programmable RF source is required. Design evaluation must confirm the required output range, reference frequency, loop-filter configuration, channel spacing, and regulatory constraints for the target ISM band. When implementing the device, follow the manufacturer’s recommended reference, crystal, resonator, loop-filter, and decoupling networks without substituting values based only on generic synthesizer examples. PCB layout should keep the reference and RF paths short, provide a continuous ground reference, place decoupling capacitors close to the supply pins, and route high-frequency outputs over controlled-impedance traces. The serial interface must also be compatible with the host microcontroller’s voltage levels and timing requirements. This page consolidates the verified 2.5 GHz, 24-TSSOP, package-width, distributor, and cross-reference information with practical selection guidance, application notes, and same-family replacement analysis. It also distinguishes confirmed technical facts from parameters that require confirmation in the complete manufacturer datasheet before schematic release or production qualification.

RFQ رابطہ
SI4136-F-GM - 2.5 GHz RF Synthesizer | Silicon Labs
SI4136-F-GM

SI4136-F-GM - 2.5 GHz RF Synthesizer | Silicon Labs

The Silicon Labs SI4136-F-GM is an RF frequency-synthesizer IC with a maximum listed frequency of 2.5 GHz, three integrated VCOs, and a 28-pin VQFN exposed-pad package. It operates from a 2.7 V to 3.6 V supply and uses a three-wire serial interface for divider and power-down programming. The device is intended for wireless RF and IF signal generation. An RF frequency synthesizer is a clock-and-timing semiconductor that generates a controlled output frequency from a reference signal. It combines a voltage-controlled oscillator, phase detector, loop filter, and programmable divider in one package. The SI4136-F-GM integrates three VCOs so multiple RF or IF frequencies can be synthesized for wireless communications, WLAN, satellite radio, and related RF signal chains. The verified distributor listings identify the SI4136-F-GM as a 2.5 GHz frequency synthesizer in a 28-pin VQFN exposed-pad package. Search results describe the device as an ISM RF synthesizer with integrated VCOs for wireless communications, while other listings identify RF wireless applications including WLAN and satellite radio. The operating supply range is listed as 2.7 V to 3.6 V. The Si4136 architecture provides programmable divider and power-down settings through a three-wire serial interface. This allows a host controller to configure synthesis operating conditions during system startup or when changing RF channels. Integrated VCO resources can reduce the need for external frequency-generation blocks in RF receiver, transmitter, and down-conversion designs. Typical applications include wireless LAN radio links, ISM-band communications, satellite-radio signal paths, RF receivers, and wireless transceivers. In these systems, the synthesizer supplies a controlled local oscillator or intermediate-frequency reference used by mixers, demodulators, and modulation blocks. The QFN package is intended for surface-mount assembly, while the exposed pad requires the PCB thermal and electrical land pattern specified by the manufacturer. Designers should confirm the complete pinout, recommended decoupling, loop-filter implementation, reference requirements, and exposed-pad layout against the manufacturer datasheet. They should also verify operating conditions and replacement parts rather than relying only on distributor descriptions. The verified source data provides the package, frequency, supply range, interface type, and application class, but does not provide all pin names or detailed electrical limits.

RFQ رابطہ
SI4136-F-GMR - 2.5 GHz RF Synthesizer | Silicon Labs (Tape & Reel)
SI4136-F-GMR

SI4136-F-GMR - 2.5 GHz RF Synthesizer | Silicon Labs (Tape & Reel)

The Silicon Labs SI4136-F-GMR is an RF frequency-synthesizer IC with a maximum listed frequency of 2.5 GHz, three integrated VCOs, and a 28-pin VQFN exposed-pad package. It operates from a 2.7 V to 3.6 V supply and uses a three-wire serial interface for divider and power-down programming. The device is intended for wireless RF and IF signal generation. An RF frequency synthesizer is a clock-and-timing semiconductor that generates a controlled output frequency from a reference signal. It combines a voltage-controlled oscillator, phase detector, loop filter, and programmable divider in one package. The SI4136-F-GMR integrates three VCOs so multiple RF or IF frequencies can be synthesized for wireless communications, WLAN, satellite radio, and related RF signal chains. The verified distributor listings identify the SI4136-F-GMR as a 2.5 GHz frequency synthesizer in a 28-pin VQFN exposed-pad package. Search results describe the device as an ISM RF synthesizer with integrated VCOs for wireless communications, while other listings identify RF wireless applications including WLAN and satellite radio. The operating supply range is listed as 2.7 V to 3.6 V. The Si4136 architecture provides programmable divider and power-down settings through a three-wire serial interface. This allows a host controller to configure synthesis operating conditions during system startup or when changing RF channels. Integrated VCO resources can reduce the need for external frequency-generation blocks in RF receiver, transmitter, and down-conversion designs. Typical applications include wireless LAN radio links, ISM-band communications, satellite-radio signal paths, RF receivers, and wireless transceivers. In these systems, the synthesizer supplies a controlled local oscillator or intermediate-frequency reference used by mixers, demodulators, and modulation blocks. The QFN package is intended for surface-mount assembly, while the exposed pad requires the PCB thermal and electrical land pattern specified by the manufacturer. Designers should confirm the complete pinout, recommended decoupling, loop-filter implementation, reference requirements, and exposed-pad layout against the manufacturer datasheet. They should also verify operating conditions and replacement parts rather than relying only on distributor descriptions. The verified source data provides the package, frequency, supply range, interface type, and application class, but does not provide all pin names or detailed electrical limits.

RFQ رابطہ
SI52112-B4-GT 100MHz PCIe Clock Generator | Skyworks
SI52112-B4-GT

SI52112-B4-GT 100MHz PCIe Clock Generator | Skyworks

The Skyworks Solutions SI52112-B4-GT is a 100 MHz PCI Express clock-generator integrated circuit in an 8-pin TSSOP package. According to the supplied distributor data, it provides one 100 MHz output and is categorized as an oscillator or clock-timing IC for PCI Express systems. The verified Skyworks family documentation describes Si52112-B4 as a two-output PCIe clock generator capable of supporting PCIe Gen 1, Gen 2, and Gen 3 requirements, with configurable AC parameters for signal-integrity optimization. A PCI Express clock generator is a clock-and-timing semiconductor that creates or distributes the reference clocks required by PCIe serializers, deserializers, controllers, and other digital logic. It belongs to the broader clock-generation and clock-distribution hierarchy, where accurate edge timing and low phase jitter help maintain reliable data transfer across high-speed differential links. The verified device information identifies a 100 MHz operating or output-clock figure and an 8-TSSOP surface-mount package. Skyworks states that the Si52112-B4 family can source two PCIe clocks from a 25 MHz crystal or clock input, provides frequency flexibility, and uses configurable AC parameters for signal-integrity optimization. The supplied sources also state compliance with PCIe Gen 1, Gen 2, and Gen 3 phase-jitter requirements and availability in an industrial temperature range. Typical uses include PCIe endpoint and root-complex clock trees, industrial computer expansion cards, embedded servers, storage controllers, network adapters, and test equipment that require a deterministic reference clock. The TSSOP package makes the device suitable for conventional surface-mount PCB assembly, while exact pin functions, electrical limits, output configuration, and crystal requirements should be taken from the manufacturer datasheet. When laying out a PCIe clock circuit, keep the oscillator or crystal path and clock outputs short, use controlled impedance routing for downstream links, and account for clock jitter, return loss, and power-supply noise. Confirm the package variant, pinout, output enable behavior, supply requirements, and intended PCIe generation against the official Si52112-B3/B4 datasheet before releasing a production design.

RFQ رابطہ
SI52208-A01AGM - 8-Output PCIe Gen 1-6 Clock Generator | Skyworks
SI52208-A01AGM

SI52208-A01AGM - 8-Output PCIe Gen 1-6 Clock Generator | Skyworks

The Skyworks Solutions (formerly Silicon Labs) SI52208-A01AGM is an 8-output, low-power PCI Express clock generator IC delivering 100 MHz HCSL-compatible clocks with 0.085 ps RMS phase jitter for PCIe Gen 1/2/3/4/5/6 and SRIS applications, housed in a 48-pin QFN (6x6 mm) package with exposed thermal pad. The device operates from a 1.5 V to 1.8 V core supply and provides individually-controlled hardware enable pins plus I2C programmability for output enable, spread spectrum control, and frequency select. A PCIe clock generator is a specialized timing IC that produces the reference clocks required by PCI Express lanes on a motherboard or add-in card. Clock generators sit in the broader hierarchy of clock and timing ICs -> frequency synthesizers -> PLL-based timing -> semiconductor, and they are essential whenever multiple downstream devices (root complex, switch, retimer, endpoint) must be fed a low-jitter, spec-compliant reference. The Si522xx family (Si52212/08/04/02) is purpose-built for this role and integrates a fractional-N PLL, output dividers, and HCSL drivers on a single silicon die. Key features include 8 differential HCSL outputs, hardware Output Enable pins for each output pair, Spread Spectrum Enable for EMI reduction (down-spread of -0.25% / -0.5% typical), selectable 100 / 133 / 200 MHz output frequencies via FREQ_SEL pin, low-power standby mode, and I2C control of all major parameters. Typical jitter is 0.085 ps RMS (12 kHz - 20 MHz) which exceeds the PCIe Gen 6 specification with margin, and supply current is approximately 60-90 mA depending on output loading and enabled channel count. Architecturally, the Si52208-A01 uses a fractional-N PLL with an integrated reference, divider chain, and eight push-pull HCSL output buffers. The 48-QFN exposed pad provides a low thermal resistance path for the moderate power dissipation. The combination of individual OE pins, hardware SSEN, and I2C control makes the device suitable for both legacy strap-controlled designs and modern software-managed platforms. Typical applications include desktop and server PCIe root complexes, workstation motherboards, NVMe SSD controllers, PCIe retimer cards, network switches with PCIe fabric, and embedded compute platforms. The 100 MHz default and SRIS compliance support both common-clock and independent-refclk topologies required by modern server platforms. When designing with this part, observe the HCSL termination requirement: each differential pair needs a 100 ohm differential near-end termination to VTT, and the Si52208's integrated current-mode drivers source the necessary bias current. Decouple VDD with 0.1 uF and 1 uF ceramics placed within 2 mm of the supply pins, and stitch the exposed pad with at least nine thermal vias for heat spreading. This page synthesizes distributor pricing, same-family drop-in alternatives (Si52212, Si52204, Si52202), cross-brand equivalents (Renesas 9FGL08, IDT 9DBL08), and practical design notes not found in the manufacturer datasheet alone.

RFQ رابطہ
SI52208-A02AGMR - 8-Output PCIe Gen 1-4 Clock Generator | Skyworks
SI52208-A02AGMR

SI52208-A02AGMR - 8-Output PCIe Gen 1-4 Clock Generator | Skyworks

The Skyworks Solutions SI52208-A02AGMR is an 8-output PCI Express clock generator for 1.5 V to 1.8 V PCIe Gen 1/2/3/4 and SRIS applications, housed in a 48-pin QFN (6x6 mm) package. It delivers 100 MHz, 133 MHz, or 200 MHz differential HCSL outputs with hardware- and I2C-controlled frequency selection, individual output enable pins, and integrated 85 ohm internal termination. It supports spread-spectrum enable/disable for EMI reduction, in line with PCIe Gen 1 through Gen 4 jitter requirements, plus SRIS-compliant operation. The A02 order code targets Gen 1/2/3/4 with 25 MHz LVCMOS reference input. A PCI Express clock generator is a dedicated timing IC that synthesizes the low-jitter reference clocks required by PCIe root complexes, endpoints, switches, and retimers. It belongs to the broader category of clock generators and timing ICs within the timing-and-signal-conditioning block of a computing platform, and is typically placed adjacent to the PCIe PHY or switch to minimize trace-induced jitter. Key features include a 1.5 V to 1.8 V supply range, low power consumption, hardware pin and I2C programmability for output enable and spread spectrum, and integrated 85 ohm source termination that eliminates external resistors on each differential output pair. Compliance with PCIe Gen 1/2/3/4 phase jitter and SRIS reference-clock architectures allows direct deployment in SRNS and SRIS systems without additional PLL stages. Typical applications include desktop and server PCIe slot clocking, NVMe SSD controllers, PCIe switch reference-clock trees, riser cards, and embedded-computing PCIe endpoints. The wide frequency support (100/133/200 MHz) covers Gen 1/2 (100 MHz) and Gen 3/4 (100 MHz with optional spread) plus a 25 MHz LVCMOS reference path for downstream clocking. When designing with this device, follow Skyworks reference-layout guidance for the 48-QFN exposed pad to achieve the published jitter and supply-noise performance. Decouple VDD with 0.1 microfarad plus bulk ceramic caps placed within 2 mm of the pins, and route differential pairs to maintain 100 ohm differential impedance with matched length within 5 mils. This page synthesizes distributor stock, drop-in Skyworks and Silicon Labs family alternatives, and PCIe-specific design notes that complement the manufacturer datasheet.

RFQ رابطہ
SI53102-A3-GMR - 1:2 PCIe Gen4 Clock Buffer, 8-TDFN | Skyworks
SI53102-A3-GMR

SI53102-A3-GMR - 1:2 PCIe Gen4 Clock Buffer, 8-TDFN | Skyworks

The Skyworks Solutions SI53102-A3-GMR is a high-performance 1:2 PCI Express fan-out clock buffer that delivers two low-power, PCIe-compliant differential clock outputs from a single reference input. Housed in a compact 1.4 mm x 1.6 mm 8-pin TDFN-EP surface-mount package, the part operates at 100 MHz and is qualified to support PCIe Gen 1, Gen 2, Gen 3, and Gen 4 common-clock architectures as well as Serial-ATA (SATA) signalling. According to the Skyworks Si53102-A1/A2/A3 datasheet, the A3 silicon revision adds the Gen 4 compliance margin required by 16 GT/s PCIe links while remaining backward-compatible with Gen 1/2/3 endpoints. A 2.5 V or 3.3 V supply and integrated source-termination complete the feature set. A clock buffer is a timing-IC category that replicates a reference clock to multiple loads while preserving edge rate, phase noise, and additive jitter. Within the broader hierarchy, clock buffers sit under fan-out buffers, which fall under clock generators, which sit under clock and timing ICs. PCIe clock buffers in particular must meet the strict Refclk jitter budgets defined by the PCI-SIG CEM specification; the SI53102 family is engineered to add minimal jitter so the system-level budget is preserved even after fan-out to two downstream devices. Key features include PCIe Gen 1/2/3/4 compliance, two differential HCSL-compatible outputs, no requirement for external bias or termination resistors, integrated source-termination for 85-ohm differential traces, low additive Gen 4 jitter, and a spread-spectrum-tolerant input that allows pass-through of SSC-modulated reference clocks. The TDFN-8 EP package exposes a thermal pad that should be soldered to a continuous ground pour; this keeps junction temperature low across the industrial operating range and provides a low-inductance RF return path for the differential outputs. Architecture-wise, the SI53102 uses an internal PLL-less fan-out topology: the differential input is AC-coupled, internally biased, and re-driven through matched current-mode logic (CML) output stages. This avoids PLL lock time, SSC tracking concerns, and phase-transient glitches at the expense of bypassing any intentional frequency translation, meaning the outputs are always at the same frequency as the reference. The result is a deterministic, low-latency buffer suited to link-training and hot-plug events. Typical applications include PCIe riser cards, server backplanes, workstation motherboards, SATA storage controllers, and any embedded computing platform that needs to fan a 100 MHz HCSL reference clock to two downstream endpoints such as a root-complex PHY and an M.2 socket. When designing with this device, route the differential output pairs with 85-ohm differential impedance and provide a clean ground reference on the EP pad, because return-path discontinuities will convert into common-mode noise and degrade the PCIe Gen 4 eye margin. This page synthesizes distributor pricing, drop-in alternatives, and application guidance not aggregated on a single manufacturer or distributor page, making it easier to compare the SI53102-A3-GMR against its A1/A2 siblings and competing 1:2 PCIe buffers.

RFQ رابطہ
SI53112-A00AGM - 12-Output PCIe Gen 3 ZDB Buffer | Skyworks
SI53112-A00AGM

SI53112-A00AGM - 12-Output PCIe Gen 3 ZDB Buffer | Skyworks

The Skyworks Solutions (formerly Silicon Labs) SI53112-A00AGM is a 1:12 low-power, differential zero-delay buffer (ZDB) that meets the Intel DB1200ZL specification for distributing reference clocks. The device operates from a 100 MHz or 133.33 MHz differential input and provides twelve 100 MHz or 133.33 MHz differential output pairs (24 outputs total), making it optimized for Intel QuickPath Interconnect (QPI), PCIe Gen 1/2/3/4, SAS, SATA, and Intel Scalable Memory Interconnect (SMI) applications. It is packaged in a 64-pin QFN (9x9 mm) with an exposed pad. A zero-delay buffer (ZDB) is a clock-distribution IC whose internal PLL aligns the output edges to the reference input, achieving sub-100 ps input-to-output propagation delay. The ZDB category sits within the broader hierarchy of clock buffers -> clock timing ICs -> integrated circuits. ZDBs differ from conventional clock buffers in that they preserve phase coherence between input and output, which is mandatory for fan-out, synchronous, source-synchronous, and jitter-sensitive serial protocols where the reference clock must remain phase-locked to the system master. Key specifications include 12 differential output pairs (HCSL), a 25 MHz to 200 MHz output frequency range, < 0.5 ps RMS phase jitter (12 kHz-20 MHz) at 133.33 MHz, 50 ps input-to-output propagation delay, 3.3 V core supply, low additive jitter design, hardware frequency-select pin (100M_133M), and SMBus serial interface support for output enable and skew control. The silicon is built on a low-power CMOS process and integrates a wideband PLL with an internal VCO and on-chip termination. Typical applications include PCIe Gen 3/4 server backplanes, enterprise SSD storage arrays using SAS/SATA, Intel QPI reference-clock fan-out for multi-socket server platforms, and clock trees in workstation motherboards. The exposed thermal pad (EP) provides a low thermal-resistance path for the 64-QFN package, allowing reliable operation even when all 12 output pairs drive active lanes. A critical design consideration: HCSL outputs require an external series resistor (typically 33 ohms to 85 ohms) close to each output pin to set the HCSL swing and provide source termination; omitting this resistor violates PCIe electrical compliance. Decouple VDDA/VDD with 0.1 uF X7R ceramics adjacent to the device. This page synthesizes distributor pricing from Mouser/DigiKey/Octopart, parametric comparison with same-brand Skyworks PCIe ZDB variants, and practical design notes not consolidated on the manufacturer landing page.

RFQ رابطہ
SI5324C-C-GM - 945MHz Jitter Attenuator | Skyworks
SI5324C-C-GM

SI5324C-C-GM - 945MHz Jitter Attenuator | Skyworks

The Skyworks SI5324C-C-GM is a precision clock multiplier and jitter attenuator that accepts two input clocks from 2 kHz to 710 MHz and generates two output clocks from 2 kHz to 945 MHz, with selected frequencies up to 1.4 GHz. It is packaged in a 36-QFN 6 x 6 mm package and is intended for timing applications requiring low phase noise and sub-1 ps jitter performance. The device supports programmable clock multiplication and frequency synthesis through I2C or SPI control, while its integrated loop filter provides selectable loop bandwidths from 4 Hz to 525 Hz. A clock multiplier, also called a frequency multiplier or PLL-based clock synthesizer, generates a stable output frequency from one or more reference clocks. A jitter attenuator adds phase-noise filtering and frequency-translation capabilities, making it part of the clock-and-timing IC hierarchy: clock multiplier -> jitter attenuator -> timing IC -> semiconductor. This is useful when a system must clean an existing clock, translate frequencies, or create multiple related outputs without relying on a simple fixed-ratio oscillator. Key verified features include two independent input-clock paths, two independently divided outputs from a common synthesis engine, programmable frequency translation, and ultra-low output jitter. Published output jitter can reach 290 fs rms from 12 kHz to 20 MHz and 320 fs rms from 50 kHz to 80 MHz. The low-loop-bandwidth architecture is suited to applications where accumulated upstream timing noise must be reduced before driving precision converters, communications equipment, or video circuitry. The SI5324 family uses DSPLL technology according to the manufacturer product description. Its external reference can also serve as a clock source for frequency synthesis. Configuration is software-controlled through I2C or SPI, allowing the device to be integrated into systems requiring programmable clocks, calibration, or multiple derived outputs. The exact input-output frequency combination and loop bandwidth depend on the programming configuration and must be validated against the manufacturer datasheet. Typical uses include Ethernet and WAN timing, SONET/SDH/STM systems, video clock generation, optical transport, test equipment, and high-speed communication links. The part is particularly suitable when a board receives a noisy reference but needs a low-jitter output with a different frequency. Compared with a basic buffer, it provides frequency synthesis and attenuation in one device; compared with a dedicated crystal oscillator, it supports programmable operating conditions. A key design consideration is clock-source quality and loop-bandwidth selection. The input clock, external reference, crystal or resonator network, output loads, and programming values must be designed together because incorrect loop settings can degrade jitter performance or prevent lock. Follow the manufacturer datasheet for the 36-QFN pin assignments, differential clock connections, exposed-pad treatment, decoupling, layout, and recommended external components. This page consolidates verified frequency-range, jitter, interface, package, and source information with application-oriented design guidance. It does not infer an unverified stock status, lifecycle statement, price, pinout, or drop-in replacement; those fields remain qualified where the supplied data does not establish them.

RFQ رابطہ
SI53306-B-GMR - 1:4 Universal Low-Jitter Clock Buffer | Skyworks
SI53306-B-GMR

SI53306-B-GMR - 1:4 Universal Low-Jitter Clock Buffer | Skyworks

The Skyworks (formerly Silicon Labs) SI53306-B-GMR is a universal 1:4 low-jitter clock buffer and level translator housed in a 16-pin QFN with exposed pad, operating over an output frequency range of 1 MHz to 725 MHz. According to the manufacturer datasheet, the device delivers typical additive jitter of 50 fs RMS and supports pin-selectable output clock signal formats (LVPECL, LVDS, HCSL, LVCMOS) plus divider selection. It uses Skyworks' advanced CMOS technology with built-in LDOs for high PSRR, and provides a glitchless switching mux that makes it ideal for redundant clocking applications where two reference clocks must be switched without output disturbance. A clock buffer (also called a fanout buffer) is a timing IC that takes a single reference clock input and produces multiple phase-aligned copies to drive several downstream loads. Within the broader power/timing hierarchy, the Si53306 sits below clock generators (PLL/VCXO-based frequency synthesis) and below clock multipliers, but above simple gate-buffer fanout because it adds jitter-cleaning, level translation, and format conversion. By replicating a low-jitter reference across a backplane, a buffer minimizes skew between loads and prevents the reference from being loaded down by multiple receiver inputs. Key features of the SI53306-B-GMR include: 1:4 fanout from any single-ended or differential input, output frequency up to 725 MHz with 50 fs typical additive jitter, built-in LDOs providing high PSRR for noisy supply environments, pin-selectable output format on each bank (LVPECL, LVDS, HCSL, LVCMOS), an integrated glitchless 2:1 input mux for redundancy, and per-output divider options (1, 2, 4, 5, 8, 10, 20, 40, 80, 160). The wide supply range of 2.5 V or 3.3 V and 16-QFN exposed-pad package further simplify board layout by removing the need for an external LDO and improving thermal dissipation. Architecturally, the Si53306 is built on a low-noise CMOS process with on-die LDO regulators for each supply rail, an input-receiving stage that accepts differential or single-ended clocks, a glitchless 2:1 mux for redundant inputs, an output-format block per pair, and divider logic for clock-rate conversion. Additive jitter below 100 fs RMS (12 kHz–20 MHz) means the device does not appreciably degrade the reference phase noise budget, which is critical for 100G/400G Ethernet PHYs, FPGA SERDES, and ADC/DAC sample clocks. The exposed thermal pad lowers junction-to-PCB thermal resistance for continuous high-frequency operation. Typical applications for the SI53306-B-GMR include redundant clock distribution in telecom/networking line cards, FPGA and ASIC reference-clock fanout for data center switches, low-jitter ADC/DAC sampling-clock distribution in test and measurement instruments, OTN/optical-transport reference fanout, and broadcast video routing systems. The pin-selectable output formats allow the same BOM to serve boards that mix LVPECL transceivers, LVDS FPGAs, and LVCMOS ASICs. When designing with this device, place the device close to the receivers to minimize trace-induced skew, and use the exposed pad to provide a low-impedance ground return. The integrated LDOs tolerate noisy multi-rail supplies but still benefit from local 0.1 µF + 10 µF decoupling on each supply pin. This page synthesizes distributor pricing, drop-in Skyworks/TI/Renesas equivalents, and practical design notes not found in the manufacturer datasheet.

RFQ رابطہ
SI53307-B-GM - 2:2 Low-Jitter Clock Buffer | Skyworks | 725MHz
SI53307-B-GM

SI53307-B-GM - 2:2 Low-Jitter Clock Buffer | Skyworks | 725MHz

The Skyworks (formerly Silicon Labs) SI53307-B-GM is a universal 2:2 low-jitter fanout clock buffer and level translator with a pin-selectable output clock signal format, divider selection, and integrated 2:1 input multiplexer, operating from 1 MHz to 725 MHz in a 16-pin QFN exposed-pad package. It features 50 fs typical additive jitter, a glitchless switching mux for redundant clocking, and built-in LDOs that deliver high PSRR while reducing the need for external supply-filtering components. Supply voltage spans 2.97 V to 3.63 V from a single rail. A clock buffer (also called a fanout buffer) is a type of timing IC that replicates a single reference clock to multiple downstream loads while preserving edge fidelity, frequency, and phase. Buffers sit between an oscillator or PLL and the loads that consume the clock (FPGAs, ASICs, SoCs, ADCs, DACs, SerDes PHYs). Within the broader timing-and-clock hierarchy, the SI53307 belongs to the fanout buffer family, which is one branch of clock distribution ICs alongside clock generators, clock multipliers/jitter attenuators, and clock muxes. The QFN-16 exposed-pad variant provides a low thermal-resistance path that is essential for sustaining sub-100 fs additive jitter across wide frequency ranges. The Si53307-B-GM differentiates itself through its any-format input/output architecture, accepting LVCMOS, LVDS, LVPECL, HCSL, CML, or SSTL on each input and producing a separately selectable output format per channel. Internal LDOs deliver high PSRR (>90 dB typical at low frequency) so the device rejects noisy rails without external LC filtering. Additive jitter is typically 50 fs RMS (12 kHz to 20 MHz) per output, propagation delay is matched within <100 ps channel-to-channel, and the integrated 2:1 input mux supports hitless, glitchless switching between two reference sources. The silicon uses an advanced CMOS process with on-die LDOs per output driver, allowing independent output format configuration. Output skew is held under 50 ps, and the divider block supports ÷1, ÷2, ÷4, ÷8, ÷16, ÷32, ÷64 per output, all pin-selectable. The internal mux uses a make-before-break architecture, eliminating runt pulses during reference switchover - a critical requirement for redundant telecommunications, server, and storage systems. Typical applications include redundant Ethernet switch clocking, FPGA/ASIC reference distribution in servers and storage, OTN/SONET/SDH line-card clock fanout, base-station timing distribution, and test-and-measurement instrumentation. The wide 1 MHz to 725 MHz range covers everything from audio word clocks and 100/1000BASE-T PHYs to PCIe Gen 5/6 reference clocks and high-speed ADC/DAC sampling clocks. Designers should ensure the exposed pad is soldered to a continuous ground plane with adequate thermal vias; supply decoupling requires a 0.1 µF X7R capacitor placed within 2 mm of the VDD pin. Output format selection must be set before VDD ramps above 0.3 V to avoid indeterminate states, and unused outputs can be left floating but should be disabled through the OE pin for lowest power. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ رابطہ
SI5330B-B00205-GM - 1:4 LVDS Clock Buffer, 710 MHz | Skyworks
SI5330B-B00205-GM

SI5330B-B00205-GM - 1:4 LVDS Clock Buffer, 710 MHz | Skyworks

The Skyworks Solutions SI5330B-B00205-GM is a 1:4 differential clock fanout buffer and level translator operating up to 710 MHz, housed in a 24-pin QFN (4x4 mm) package with exposed thermal pad. It supports 1.8 V, 2.5 V, or 3.3 V supply operation, generates four differential (LVPECL, LVDS, HCSL) or eight single-ended (CMOS, SSTL, HSTL) outputs, and accepts a single-ended or differential input reference clock. A clock buffer (also called a clock fanout buffer or zero-delay buffer) is a timing IC that replicates a single reference clock into multiple phase-aligned copies while preserving edge fidelity. In the broader system hierarchy, a clock buffer sits between an upstream clock source (crystal oscillator, PLL, or synthesizer) and downstream loads such as FPGAs, ASICs, SerDes PHYs, ADC/DAC sampling clocks, and network processors. Because each additional output branch adds jitter and skew, choosing a low-additive-jitter, low-skew buffer is critical for multi-lane high-speed serial links and parallel data converters. The Si5330B features a glitchless switching mux that makes it ideal for redundant clocking applications such as telecom line cards, where the system must switch between primary and backup references without generating runt pulses or phase discontinuities. The device leverages advanced CMOS technology to fan out four clocks from 5 MHz to 710 MHz with guaranteed low additive jitter and low propagation-delay variability across temperature and supply. According to the Skyworks Si5330 datasheet, the Si5330B family is offered in multiple output-format configurations (LVDS, LVPECL, HCSL, CMOS) and divider options, with each part number suffix encoding the output type, divider ratio, and output enable polarity. Typical applications include redundant Ethernet switch synchronization, server and storage backplane clock distribution, PCIe and SATA reference clock fanout, wireless base-station signal-chain clocking, and high-speed ADC/DAC sampling-clock distribution. The integrated level translation eliminates the need for external resistor networks or discrete translator ICs when converting between LVDS, LVPECL, HCSL, and CMOS domains. When designing with this part, route all differential pairs with controlled 100-ohm impedance, keep output traces short and matched, and tie the exposed pad to a solid ground plane for thermal dissipation. Decouple each supply pin with a 0.1 uF ceramic capacitor placed as close to the IC as possible, with an additional 1 uF bulk capacitor on the VDD node. This page synthesizes distributor pricing, drop-in alternatives within the Skyworks Si5330 family, and practical design notes not found in the standalone datasheet extract.

RFQ رابطہ
SI5330B-B00206-GMR - 1:4 LVDS Clock Buffer/Translator | Skyworks
SI5330B-B00206-GMR

SI5330B-B00206-GMR - 1:4 LVDS Clock Buffer/Translator | Skyworks

The Skyworks (formerly Silicon Labs) SI5330B-B00206-GMR is a 1.8/2.5/3.3 V low-jitter, low-skew 1:4 clock buffer and level translator housed in a 24-pin VFQFN exposed-pad package (4x4 mm). It accepts a single-ended or differential input clock and produces four differential LVDS outputs (or, in related Si5330 order codes, four LVPECL/HCSL or eight single-ended CMOS/SSTL/HSTL outputs), supporting up to 710 MHz of output frequency. The device is specified for 1.8 V, 2.5 V, or 3.3 V supply operation across the -40 °C to +85 °C industrial temperature range and is supplied on a 3,000-unit tape-and-reel (the "-GMR" suffix). A clock buffer (also called a clock fanout buffer or clock translator) is a specialized timing IC that takes one incoming reference clock and replicates it across multiple low-skew outputs, optionally shifting voltage standards along the way. Clock buffers sit in the timing tree between a primary PLL/oscillator and downstream devices such as ADCs, DACs, FPGAs, ASICs, and SERDES PHYs. Modern clock buffers like the Si5330 family are evaluated less by raw frequency and more by additive phase jitter, output-to-output skew, and PSRR-equivalent supply noise immunity; the Si5330 series targets the sub-1 ps RMS additive jitter class typical of 1 Gb to 10 Gb serial-link reference clocks. Key features of the SI5330B-B00206-GMR include: 1:4 fanout from a single reference; support for differential-input signaling (LVDS, LVPECL, HCSL, CML) and single-ended CMOS/SSTL/HSTL; configurable output format and voltage; built-in level translation between input and output standards; very low output-to-output skew (typically tens of picoseconds); and a wide 1 MHz to 710 MHz output frequency range. The exposed thermal pad (EP) of the QFN-24 package provides a low-theta-JA path to PCB copper for high-temperature operation. Architecturally, the Si5330 uses a differential input receiver followed by a low-jitter PLL/buffer core and four matched output drivers; the B-order code (B00206) selects the LVDS-specific output configuration, with internal source-termination and bias networks that eliminate most external component requirements and reduce BOM count versus discrete solutions. Typical applications include: clock distribution for multi-lane SERDES in networking switches and routers; fanout for FPGA/ASIC reference clocks; ADC/DAC sampling-clock distribution in test and measurement; redundant clock switching in telecom line cards; and low-jitter timing for video broadcasting and broadcast-grade audio sample-rate converters. Designers often pair the Si5330 with a primary oscillator or PLL such as the Si5351/Si5341 family upstream and an FPGA downstream. Designers should pay attention to the exposed pad layout - it must be soldered to a sufficiently large copper pour to meet the theta-JA spec, and input trace impedance should be controlled to 100 ohm differential for LVDS/LVPECL/HCSL to avoid reflections above 200 MHz. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ رابطہ
SI5330F-B00214-GM - 1:8 LVCMOS Clock Buffer | Skyworks | 200MHz
SI5330F-B00214-GM

SI5330F-B00214-GM - 1:8 LVCMOS Clock Buffer | Skyworks | 200MHz

The Skyworks Solutions SI5330F-B00214-GM is a 1:8 LVCMOS low-jitter clock fanout buffer and level translator IC operating up to 200 MHz, housed in a 24-pin QFN exposed-pad package. It accepts single-ended or differential input clocks and produces eight CMOS outputs or four differential outputs (LVPECL, LVDS, HCSL), with signal-level translation between clock domains. The device is specified for 1.8 V, 2.5 V, or 3.3 V core supply operation across the industrial -40 C to +85 C range. A clock buffer (also called a clock fanout buffer or clock driver) is a non-PLL timing component that reproduces one incoming clock reference into multiple low-skew copies. Within the timing hierarchy, clock buffers sit below clock generators and PLL-based synthesizers and above the load devices (processors, FPGAs, transceivers, memory). They are used whenever a single oscillator or PLL output must be distributed across a PCB with minimal additive jitter and tight output-to-output skew, without multiplying or dividing the frequency. Key features of the SI5330F-B00214-GM include support for differential input clock signals (LVPECL, LVDS, HCSL) as well as single-ended CMOS/SSTL/HSTL inputs, four user-selectable output frequency dividers per output pair (÷1, ÷2, ÷4, ÷8), per-bank output voltage translation, and individual output enable pins. Its non-PLL architecture means ultra-low additive jitter (sub-ps RMS typical) and zero output-output skew between same-bank outputs. The 24-QFN exposed pad provides a thermal pad for low-impedance ground return and package-level bypassing. Typical applications include high-performance PCB clock distribution in networking switches/routers, server and storage backplanes, telecommunications line cards, FPGA/ASIC reference clock fanout, PCIe Gen2/3 reference distribution, and industrial control backplanes. The flexible per-bank output voltage translation makes it suitable when downstream devices (e.g., an FPGA core and a DDR memory controller) operate at different logic levels on the same board. When designing with this device, ensure the exposed pad is soldered to a continuous ground plane for thermal and electrical performance. Decouple each VDD pin with a 0.1 uF ceramic capacitor placed within 3 mm of the pin, and respect the 50 ohm transmission-line routing on each output if traces exceed approximately 25 mm.

RFQ رابطہ
SI5330F-B00215-GM - 1:8 200MHz Clock Fanout Buffer | Skyworks
SI5330F-B00215-GM

SI5330F-B00215-GM - 1:8 200MHz Clock Fanout Buffer | Skyworks

The Skyworks Solutions SI5330F-B00215-GM is a 1:8 low-jitter, low-skew clock fanout buffer and level translator housed in a 24-pin QFN exposed-pad package. The device accepts a single-ended or differential input clock and produces four differential (LVPECL, LVDS, HCSL) or eight single-ended (CMOS, SSTL, HSTL) output clocks, supporting frequencies from 5 MHz to 200 MHz with 0.15 ps additive RMS jitter. A clock buffer (also called a clock fanout buffer or clock distribution IC) is a non-PLL device that replicates one reference clock to multiple loads while preserving timing integrity. The clock buffer hierarchy places this part under clock distribution > clock timing > timing IC > power management and timing. Unlike PLL-based clock generators, a pure buffer adds minimal jitter and does not introduce frequency multiplication or synthesis, making it ideal for distributing an already-clean reference to multiple ASICs, FPGAs, or memory channels. Key features include sub-100 ps output-to-output skew, individual output enable/shutdown pins, integrated clock monitoring with failure detection, and signal-level translation between differential and single-ended domains. The 24-VFQFN exposed pad package provides a low thermal resistance path, while supporting 1.8 V, 2.5 V, or 3.3 V core supply operation. Output impedance matching and integrated termination simplify PCB routing for high-speed clock distribution. The Si5330F uses a low-skew H-tree distribution architecture with matched output driver impedance to minimize channel-to-channel variation. Its CMOS/LVCMOS-friendly input stage and selectable output formats make it suitable for mixed-voltage designs where a 3.3 V oscillator must drive 2.5 V LVDS PHYs, or where a 1.8 V system clock must fan out to 3.3 V peripheral logic. Typical applications include telecom base-station timing distribution, server and storage backplane clocking, FPGA/ASIC reference fanout, and high-speed ADC/DAC sampling clock distribution. In each case the Si5330F's low additive jitter preserves the phase-noise budget of the upstream oscillator or PLL. When designing with this part, place it within 25 mm of the source clock and target loads to keep PCB trace skew inside the IC's compensation window, and provide adequate decoupling on VDD to keep supply noise out of the clock path.

RFQ رابطہ
SI5330F-B00215-GMR - 1:8 LVCMOS Clock Buffer 200 MHz | Skyworks
SI5330F-B00215-GMR

SI5330F-B00215-GMR - 1:8 LVCMOS Clock Buffer 200 MHz | Skyworks

The Skyworks SI5330F-B00215-GMR is a low-jitter, low-skew 1:8 LVCMOS clock fanout buffer rated up to 200 MHz and housed in a 24-pin VFQFN exposed-pad package. It accepts a single-ended or differential clock input and produces eight low-jitter LVCMOS outputs from a single reference, making it suitable for high-performance PCB clock distribution. The device operates from 1.8 V, 2.5 V, or 3.3 V supplies with ±10 % tolerance and supports the -40 °C to +85 °C industrial temperature range. A clock buffer (or fanout buffer) is a specialized timing IC that takes one reference clock input and replicates it across multiple output channels with minimal additive jitter and tightly controlled skew. Within the broader timing hierarchy, it sits between clock generators/PLLs and downstream loads such as ADCs, DACs, FPGAs, ASICs, and memory interfaces. By regenerating the input waveform at each output, a fanout buffer prevents the reference from being loaded down by many receivers and shields each output from board-level coupling. Key features include programmable output enable per channel, input formats that accept LVCMOS, LVPECL, LVDS, HCSL, or SSTL style signals, and built-in level translation that allows the Si5330 to act as a clock-level translator between mixed-voltage domains. The Skyworks CMOS architecture targets low additive jitter while maintaining output-to-output skew within a few tens of picoseconds, supporting multi-lane serial interfaces, telecom line cards, and ATE instrumentation. Typical applications are high-line-count telecom and networking backplanes, multi-FPGA/multi-ASIC clock trees, server and storage controllers, and reference-clock distribution in test and measurement equipment. The exposed thermal pad (EP) improves power dissipation for the eight switching outputs. When designing in this part, place bypass capacitors of 0.1 µF plus 10 µF as close as possible to each VDD pin, keep trace lengths matched on all eight outputs to preserve low skew, and provide a solid ground pour connected to the EP to ensure thermal and return-path integrity.

RFQ رابطہ
SI5330F-B00216-GM - 1:8 LVCMOS Clock Fanout Buffer | Skyworks
SI5330F-B00216-GM

SI5330F-B00216-GM - 1:8 LVCMOS Clock Fanout Buffer | Skyworks

The Skyworks SI5330F-B00216-GM is a low-jitter, low-skew 1:8 LVCMOS clock fanout buffer and level translator that accepts one single-ended or differential clock input and produces eight LVCMOS output clocks up to 200 MHz, housed in a 24-pin QFN exposed-pad (4x4 mm) package. It supports 1.8 V, 2.5 V, and 3.3 V supply operation with a wide 1.71 V to 3.63 V input range, enabling flexible level translation between mixed-voltage clock domains in modern FPGA, ASIC, and processor-based systems. A clock fanout buffer is a timing-IC category that distributes a single reference clock to multiple loads while preserving edge fidelity. In the system hierarchy, it sits below the clock generator/synthesizer and above the load-side receivers: clock generator -> clock buffer -> downstream logic (FPGA, ASIC, memory, PHY). By replacing ad-hoc fanout trees built from discrete gates or zero-delay buffers, fanout ICs reduce additive jitter and pin-to-pin skew across the board. Key specifications include 50 ps typical additive jitter, less than 100 ps output-to-output skew, less than 150 ps part-to-part skew, and CMOS-compatible inputs and outputs with on-chip termination. The exposed pad provides a low-thermal-resistance path for high-frequency operation, while per-output enable pins (SDA_SCL, OE) support individual clock gating and power-sequencing schemes. The device is optimized for high-performance PCB clock distribution where deterministic timing and clean signal edges are required. Architecturally, the SI5330F-B00216-GM uses a non-PLL, fixed-logic fanout core that minimizes cycle-to-cycle variation and avoids the spurious outputs typical of PLL-based buffers. The input accepts LVCMOS, LVDS, LVPECL, HCSL, or SSTL clock sources, and each output can be independently powered to support mixed-voltage rails (1.8 V outputs from a 3.3 V supply, etc.). This combination of architecture and I/O flexibility simplifies board design while maintaining sub-100 ps skew. Typical applications include clock distribution on FPGA- and ASIC-based line cards, server and storage backplane clock trees, networking switches and routers, communications infrastructure, and any PCB requiring multiple copies of a low-jitter reference clock. It is well suited to fan-out of a backplane-derived clock to multiple PHY or transceiver devices. When designing with this part, place input and output decoupling capacitors within 100 mils of their respective supply pins and stitch the exposed pad with at least 9 thermal vias to the internal ground plane. Source-terminate long clock traces to limit reflections, and avoid routing outputs parallel to high-speed data signals to prevent crosstalk into timing edges. This page synthesizes distributor pricing, drop-in Skyworks/Silicon Labs alternatives, and practical PCB-layout design notes not found on the manufacturer datasheet alone, giving engineers an actionable decision resource beyond a typical distributor listing.

RFQ رابطہ