مصنوعات (44,000+)

XC6SLX16-3FT256C - 14,579 Logic Cell Spartan-6 FPGA | AMD
XC6SLX16-3FT256C

XC6SLX16-3FT256C - 14,579 Logic Cell Spartan-6 FPGA | AMD

AMD XC6SLX16-3FT256C is a Spartan-6 LX field-programmable gate array with 14,579 logic elements, 1,139 configurable logic blocks, 589,824 bits of block RAM, and a maximum clock frequency of 667 MHz, packaged in a 256-LBGA. The device combines programmable logic, embedded memory, programmable I/O, and dedicated FPGA resources in a single 45 nm CMOS device for embedded and cost-sensitive digital systems. A field-programmable gate array is a semiconductor whose digital logic, interconnections, and I/O behavior are configured after manufacture. The Spartan-6 LX family belongs to the broader FPGA hierarchy and provides parallel programmable logic, block RAM, digital signal processing resources, and clock-management functions. This makes the device useful where a fixed application-specific integrated circuit would be inflexible or uneconomic to develop. The XC6SLX16-3FT256C provides 14,579 logic elements arranged across 1,139 CLBs, with 589,824 total RAM bits supporting data buffering, packet handling, and general-purpose embedded storage. Its reported 667 MHz maximum clock frequency provides useful timing margin for control logic, interface bridges, instrumentation, and embedded processors. The -3 speed designation identifies its performance grade within the Spartan-6 LX family. Built on 45 nm CMOS technology, the device supports a 1.2 V core supply as identified in the verified product records. Its 256-LBGA package uses a 1 mm pitch and measures approximately 17 mm by 17 mm. The supplied comparison data also identifies 186 I/O resources, allowing the device to interface multiple buses, peripherals, and external control signals while preserving a compact surface-mount footprint. Typical uses include industrial automation, communications equipment, embedded control, test and measurement, signal processing, and compact network interfaces. The combination of programmable logic, block RAM, and 186 I/O permits designers to consolidate parallel control, data buffering, and protocol handling in one device. A complete design still requires suitable clocking, configuration storage, decoupling, and board-level signal-integrity implementation. When planning a board, verify every BGA-256 land pattern against the AMD Spartan-6 package pinout files and the selected device’s official package drawing. The -3 speed grade and commercial C suffix must also be treated as part of the exact ordering code rather than assumed interchangeable with other Spartan-6 grades or temperature options. This page consolidates the verified distributor specifications, 256-LBGA sourcing information, same-family replacement candidates, pricing evidence, and practical FPGA design considerations into one engineering-focused reference. It distinguishes directly documented facts from package details or operating parameters that still require confirmation from the complete AMD device documentation.

RFQ رابطہ
XC6SLX16-3FT256I - Spartan-6 LX FPGA, 14579 Cells, 186 I/O | AMD
XC6SLX16-3FT256I

XC6SLX16-3FT256I - Spartan-6 LX FPGA, 14579 Cells, 186 I/O | AMD

The AMD/Xilinx XC6SLX16-3FT256I is a Spartan-6 LX field programmable gate array (FPGA) delivering 14,579 logic cells, 1,139 configurable logic blocks (CLBs) and 186 user I/O, with a maximum internal clock frequency of 667 MHz on a 1.2 V core supply, packaged in a 256-ball FTBGA (FT256) surface-mount package measuring 17 x 17 mm with 1.0 mm ball pitch. An FPGA is a reconfigurable digital integrated circuit whose logic, memory and I/O are defined by a bitstream loaded at power-up. A logic cell contains a lookup table plus flip-flops and routing resources, and thousands of such cells are interconnected by a programmable switch matrix. The Spartan-6 LX family is the logic-optimized member of the Spartan-6 series: it targets designs dominated by wide datapaths, control logic, protocol bridges and video/interface consolidation rather than maximum DSP density. In the device hierarchy, this part sits as a programmable logic device within the FPGA & CPLD family of integrated circuits. Key characteristics of the XC6SLX16-3FT256I include the -3 speed grade, which is the highest-performance Spartan-6 LX grade available, and a 45 nm CMOS process node that keeps both static power and dynamic power manageable in cost-sensitive embedded systems. The device provides 186 user I/O in a compact 256-ball grid, which is a high I/O-to-logic ratio for a device of this size. Temperature handling is specified as 0 C to +85 C (32 F to 185 F) with industrial-grade parts marking, and the FT256 package is offered in a lead-free configuration. Technically, the device combines LUT-based six-input logic architecture with dedicated block RAM for data buffering and DSP-oriented arithmetic, plus SelectIO resources that support high-speed memory interfaces and common I/O standards through selectable I/O drivers. Because the device is a -3 grade part, timing closure is the easiest of the Spartan-6 LX options, giving the highest achievable system clock and the greatest margin on demanding multi-clock domains. Configuration is handled through the standard Xilinx JTAG and configuration interface scheme, supporting both persistent and reconfiguration-oriented design flows. Typical applications include industrial control and PLC I/O expansion, industrial Ethernet and fieldbus bridging, video and image datapath consolidation, USB and multi-protocol interface hubs, motor and motion control sequencers, and compact embedded control platforms for aerospace, telecommunications and consumer networking equipment. When designing with this device, plan the power budget and thermal design around the 1.2 V core supply and the I/O supply rails, and confirm the pinout against the AMD Spartan-6 package pinout files for the FT256 package before layout. Because the FT256 package is a dense 1.0 mm-pitch BGA, a fine-pitch assembly and adequate solder mask and paste control are required to avoid bridging defects. This page consolidates distributor pricing, verified drop-in replacement options, and packaging and thermal design notes for the XC6SLX16-3FT256I that are not consolidated in any single manufacturer document, so engineers can evaluate the device and its alternates before committing a PCB layout.

RFQ رابطہ
XC6SLX16-3FTG256C - Spartan-6 LX FPGA, 14k LCs, 256-FTBGA | AMD
XC6SLX16-3FTG256C

XC6SLX16-3FTG256C - Spartan-6 LX FPGA, 14k LCs, 256-FTBGA | AMD

The AMD (formerly Xilinx) XC6SLX16-3FTG256C is a Spartan-6 LX field-programmable gate array (FPGA) providing 14,579 logic cells, 186 maximum user I/Os, and 256 Kbits of distributed RAM in a 256-ball fine-pitch thin-ball grid array (FTBGA-256, 17 x 17 mm, 1.0 mm pitch). It uses 45 nm CMOS process technology and operates from a 1.2 V core supply with multi-voltage I/O support. An FPGA (Field-Programmable Gate Array) is a programmable logic device that lets engineers implement arbitrary digital circuits using configurable logic blocks (CLBs), programmable I/Os, on-chip memory, and dedicated hard IP such as transceivers, DSP slices, and clock management tiles. FPGAs are part of the programmable logic hierarchy alongside CPLDs and sit between discrete logic and ASICs in system design trade-offs. The XC6SLX16-3FTG256C features 1139 CLBs, 32 DSP48A1 slices, two clock management tiles (CMTs) with mixed-mode clock managers (MMCMs) and PLLs, and SelectIO high-performance I/O supporting LVDS, LVCMOS, LVTTL, SSTL, and HSTL standards across 8 I/O banks. The -3 speed grade targets high-performance designs with up to 667 MHz internal clocking. Typical applications include industrial motor control, video processing pipelines, automotive driver assistance, low-cost wireline aggregation, and embedded control systems. Its small 17 x 17 mm BGA footprint suits cost-sensitive high-volume designs. Design tips: pay careful attention to the banked I/O supply pins (VCCO), keep the auxiliary supply VCCAUX at 2.5 V to 3.3 V, and use the -C commercial temperature grade (0 C to +85 C) only inside chassis environments. This page aggregates DigiKey/Mouser distributor pricing, same-footprint alternatives in the Spartan-6 family, and 45 nm power-rail guidance not found in the manufacturer datasheet.

RFQ رابطہ
XC6SLX16-3FTG256I - Spartan-6 LX FPGA, 14K Logic Cells, 256-FTBGA | AMD Xilinx
XC6SLX16-3FTG256I

XC6SLX16-3FTG256I - Spartan-6 LX FPGA, 14K Logic Cells, 256-FTBGA | AMD Xilinx

The AMD Xilinx XC6SLX16-3FTG256I is a Spartan-6 LX field-programmable gate array (FPGA) integrating 14,579 logic cells (1,139 Configurable Logic Blocks), 589,824 bits of block RAM, and 186 user I/O into a 256-ball fine-pitch thin-ball grid array (FTBGA, 17 x 17 mm, 1.0 mm pitch) package, qualified to the industrial temperature range (-40C to +100C). It belongs to the -3 speed grade, the highest performance tier within the Spartan-6 LX family, and is fabricated on a 45 nm CMOS process that lowers static power relative to earlier 65 nm Spartan generations while preserving the 667 MHz internal operation supported by the silicon. A field-programmable gate array (FPGA) is a semiconductor device built from an array of programmable logic blocks, programmable interconnect, programmable I/O cells, and dedicated hard IP such as block RAM, DSP slices, and clock management tiles. Within the broader taxonomy it sits alongside CPLDs, gate arrays, and ASICs as a re-programmable digital logic device; FPGAs differ from CPLDs mainly in density and architectural granularity, and differ from ASICs by being configurable post-fabrication. The Spartan-6 LX family is positioned by AMD Xilinx as the cost-optimized, low-power member of the Spartan-6 generation, ideal for bridging, display, and motor-control in ASICs and ASSPs. Key features include integrated block RAM up to 589,824 bits, dual 10/100/1000 Mbps Ethernet MAC hardening options, a low-power 45 nm process with 1.2 V core voltage, integrated PCI Express endpoint block in LXT variants, and a programmable I/O voltage range that supports common single-ended and differential standards. The CLB array contains 1,139 logic cells arranged to deliver balanced logic, memory, and DSP resources, and the package's fine-pitch BGA delivers compact board area while keeping signal integrity manageable for the supported I/O rates. Spartan-6 LX uses the proven 45 nm CMOS process and the 6th-generation Xilinx FPGA architecture, bringing logic, block RAM, DSP48A1 slices, and clock management tiles (CMT) into a low-cost fabric. Memory controllers (hard MCBs) support DDR, DDR2, DDR3, and LPDDR external memory interfaces up to 800 Mb/s data rates, and the integrated GTP serial transceivers in LXT parts deliver multi-gigabit connectivity for cost-sensitive serial links. Typical applications for the XC6SLX16-3FTG256I include industrial motor-control and PLC backplanes, low-cost video bridging and consumer display controllers, automotive infotainment and telematics subsystems, machine-vision front ends, and PCIe endpoint cards in cost-sensitive computing. The wide industrial temperature range and high I/O count make it a frequent building block in factory automation and embedded vision designs. When designing with this FPGA, ensure that the I/O bank voltages reference the classfree reference design, ensure that the configuration memory (typically a SPI or BPI flash) is sized for the bitstream, and ensure that the FPGA's power-on sequencing and decoupling network match the Spartan-6 power distribution guidance in UG393 to ensure reliable industrial-temperature operation. Designers should also budget for ISE Design Suite or Vivado (legacy) toolchain support and the appropriate license. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers an at-a-glance view of where the XC6SLX16-3FTG256I fits in the Spartan-6 LX family and what alternatives exist for sourcing continuity.

RFQ رابطہ
XC6SLX16-L1FT256I - 14579-Cell Spartan-6 FPGA | AMD
XC6SLX16-L1FT256I

XC6SLX16-L1FT256I - 14579-Cell Spartan-6 FPGA | AMD

The AMD XC6SLX16-L1FT256I is a Spartan-6 LX field-programmable gate array with 14,579 logic cells, 1,139 configurable logic blocks, a 45 nm CMOS process, and a 256-pin FTBGA package. Designed for system integration and high-volume programmable logic applications, this device combines programmable logic, block RAM, digital signal processing resources, and dedicated I/O in a single package. A field-programmable gate array is a semiconductor device whose digital logic, memory blocks, and I/O assignments are configured after manufacture. The Spartan-6 LX FPGA family sits within the broader hierarchy of programmable logic devices, FPGAs, and semiconductors. This architecture makes the XC6SLX16 suitable when fixed-function logic would be inflexible or when product configurations, interface assignments, and firmware updates must evolve after board fabrication. The Spartan-6 LX configuration provides 14,579 cells and 1,139 CLBs. The listed 1 V supply value identifies the device's low-voltage CMOS operating class, while the 45 nm CMOS process provides the physical technology basis for the logic and embedded resources. The -L1 portion identifies the device speed grade, -I identifies the industrial temperature grade, and FT256 identifies the 256-ball package configuration. The XC6SLX16 family is intended for moderate-complexity embedded systems requiring a higher level of integration than basic programmable logic. Its resources can support parallel data processing, control logic, protocol bridging, memory-intensive control functions, and mixed peripheral interfaces. Because an FPGA configuration determines which circuit is implemented, engineers must account for routing, timing closure, resource utilization, configuration memory, and startup behavior during system design. Typical applications include industrial control equipment, communications infrastructure, embedded data-acquisition systems, test and measurement platforms, video or image-processing modules, and compact embedded systems that require programmable hardware. The 256-ball package also supports dense I/O arrangements, although board construction and signal-integrity performance depend on the selected package, PCB stack-up, and interface rates. Before schematic capture, use the AMD Spartan-6 package pinout files to confirm ball assignments, power rails, configuration pins, and user I/O. Validate every proposed alternative against those package files and the timing constraints of the design; sharing the XC6SLX16 family name alone does not establish interchangeability. This product record combines the verified device identity, package, process, cell count, CLB count, and temperature grade with engineering guidance, comparison data, and design considerations. It helps distinguish the exact ordered part number from related Spartan-6 devices that differ in speed grade, temperature grade, package suffix, or board footprint.

RFQ رابطہ
XC6SLX16-N3FT256I - Spartan-6 LX FPGA, 14,579 Cells | AMD
XC6SLX16-N3FT256I

XC6SLX16-N3FT256I - Spartan-6 LX FPGA, 14,579 Cells | AMD

The AMD Xilinx XC6SLX16-N3FT256I is a Spartan-6 LX field-programmable gate array with 14,579 logic cells, 186 I/O, 45 nm semiconductor technology, and a 1.2 V core supply, housed in a 256-LBGA package. It combines programmable logic, block RAM, and digital signal processing resources in one reconfigurable device. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, memory, and processing blocks are configured after manufacture. FPGA technology sits within programmable logic devices and combines configurable parallel processing, high-speed I/O, and system integration functions. The Spartan-6 LX family is intended for cost-sensitive embedded systems that require substantial programmable logic without the resources of a larger FPGA. The XC6SLX16 device provides 14,579 logic cells and 186 I/O in a 256-LBGA package. Its 45 nm fabrication process supports a compact, high-performance implementation for industrial embedded applications. The N3 ordering code identifies this -3 speed-grade configuration, while FT256I denotes the 256-ball package and industrial-temperature option. Exact block-RAM, DSP, and performance details should be selected from the device-specific Spartan-6 documentation. The device combines three principal programmable resource types: logic cells for Boolean and sequential functions, block RAM for data buffering, and DSP resources for arithmetic-intensive signal processing. These resources allow control logic, data acquisition, communications, and embedded processing to be consolidated in one package, reducing component count compared with a design assembled from separate programmable and fixed-function devices. Typical applications include industrial automation, embedded control, communications equipment, instrumentation, video processing, and sensor acquisition systems. A design can place acquisition logic, protocol handling, filtering, and control functions into one FPGA while using external memory for larger data structures. The 186 available I/O also allow direct connection to external converters, transceivers, memories, and control interfaces. The primary design consideration is package-accurate planning. Use the AMD Spartan-6 package pinout files and device-specific tables when assigning balls, configuring power rails, and routing high-speed interfaces. Differential pairs and clock inputs require controlled layout, while BGA assembly demands thermal analysis and via patterns appropriate to the board stack-up. This page consolidates the verified device identity, package information, source links, practical application guidance, and same-package replacement candidates into an engineering-focused reference. It also distinguishes documented device attributes from parameters that require selection from the full AMD datasheet and configuration tables.

RFQ رابطہ
XC6SLX25-2CSG324C - 24,051-Cell Spartan-6 LX FPGA | AMD
XC6SLX25-2CSG324C

XC6SLX25-2CSG324C - 24,051-Cell Spartan-6 LX FPGA | AMD

The AMD Xilinx XC6SLX25-2CSG324C is a Spartan-6 LX field-programmable gate array with 24,051 logic cells, 958,464 bits of block RAM, and 226 user I/O, packaged in a 324-ball CSPBGA. The device is manufactured on 45 nm CMOS, operates from a 1.2 V core supply, and is offered in the -2 performance grade. Its package measures approximately 15 mm by 15 mm with a 0.8 mm ball pitch. A field-programmable gate array, or FPGA, is a reconfigurable digital semiconductor whose logic, memory, and I/O resources can be programmed after manufacture. Within the device hierarchy, an FPGA belongs to programmable logic rather than fixed-function logic or microcontrollers. The Spartan-6 LX family combines configurable logic, block RAM, digital clock managers, programmable I/O, and embedded MicroBlaze processor resources for systems requiring flexible hardware functions and efficient product customization. The XC6SLX25 provides 1,879 configurable logic blocks, 24,051 logic cells, and 958,464 bits of block RAM according to the manufacturer device documentation. Its 226 user I/O support high-volume parallel interfaces, while integrated digital clock management and differential clock resources simplify clocking and high-speed interface designs. The -2 speed grade provides a 667 MHz maximum figure identified in the device documentation. The 45 nm CMOS implementation is designed to balance programmable functionality, performance, and power in cost-sensitive embedded systems. This device combines considerably more logic and memory than a basic programmable logic device while retaining a high I/O count for control, data acquisition, communications, and signal-processing designs. The industrial design also supports the MicroBlaze soft-processor architecture where a programmable control core is useful. Typical applications include industrial automation controllers, data-acquisition systems, embedded communications equipment, video and image-processing pipelines, instrument control, and low-power embedded processors. The 226-I/O count is especially useful when a board must connect multiple sensors, converters, memories, communications transceivers, and display or control peripherals without using a larger package. PCB implementation requires careful attention to the CSPBGA escape routing and the manufacturer’s package pinout file. Confirm power sequencing, decoupling, clock, configuration, and I/O standards against the device datasheet. Review bitstream compatibility, temperature requirements, and any board-level interface changes before releasing a production design. This page organizes the device’s core specifications, application guidance, package considerations, and same-footprint Spartan-6 options. It also highlights the parameters engineers should compare when determining whether another -grade or temperature-grade member can replace the XC6SLX25-2CSG324C without redesigning the PCB.

RFQ رابطہ
XC6SLX25-2CSG324I - 24,051-Cell Spartan-6 FPGA | AMD
XC6SLX25-2CSG324I

XC6SLX25-2CSG324I - 24,051-Cell Spartan-6 FPGA | AMD

AMD XC6SLX25-2CSG324I is a Spartan-6 LX field-programmable gate array with 24,051 logic cells, 226 user I/Os, a 375 MHz operating frequency, and a 324-ball CSBGA package. It operates from a 1.14 V to 1.26 V core supply and is manufactured using 45 nm FPGA process technology. A field-programmable gate array, or FPGA, is a programmable semiconductor in which configurable logic blocks, routing resources, and input/output resources implement a digital system. Within the semiconductor hierarchy, an FPGA sits above fixed-function logic devices because its interconnect and processing architecture can be programmed after manufacture. The Spartan-6 LX family combines programmable logic with system resources such as block RAM, digital clock managers, and PLL blocks. The XC6SLX25 device provides a useful balance of logic density, I/O availability, and power-management flexibility. Its 226 user I/Os support connections to external memory, control interfaces, communications transceivers, and general-purpose digital peripherals. The speed grade 2 designation identifies its timing class within the Spartan-6 product line, while the CSBGA-324 package supports dense board-level integration in space-constrained embedded systems. Spartan-6 devices use configurable logic and routing resources to implement parallel processing, control, protocol handling, and signal conditioning. The XC6SLX25 also incorporates dedicated resources for clock management and on-chip memory. Its 1.14 V to 1.26 V operating-voltage range identifies it as a core-supply device; board designers still need to follow the AMD Spartan-6 power-supply, decoupling, configuration, and signal-integrity guidance for the complete system. Typical applications include industrial control systems, video and image processing, communications infrastructure, instrumentation, consumer electronics, and embedded control platforms. The 226 available I/Os are particularly useful when an existing design requires numerous external buses, status signals, and high-speed serial or parallel interfaces. The device is also suitable for education and prototyping systems that require a large logic fabric and deterministic programmable behavior. A successful implementation depends on matching the selected Spartan-6 device, package, speed grade, and temperature grade to the PCB design. Use the AMD Spartan-6 package pinout files to assign every BGA ball, and follow the DS162 data sheet for DC and switching characteristics. Confirm configuration-memory support, clocking topology, pin constraints, and power sequencing before releasing a production layout. This product record combines the device's principal architecture and package characteristics with practical substitution analysis, application guidance, comparison parameters, and design checks. It is intended to help engineers identify the correct Spartan-6 LX option and distinguish exact-family substitutions from alternatives that require different packages or materially different resources.

RFQ رابطہ
XC6SLX25-2FG484C - 24,051-Cell Spartan-6 LX FPGA | AMD
XC6SLX25-2FG484C

XC6SLX25-2FG484C - 24,051-Cell Spartan-6 LX FPGA | AMD

The AMD XC6SLX25-2FG484C is a Spartan-6 LX field-programmable gate array with 24,051 logic cells, 266 I/O, a 500 MHz internal frequency, and a 484-ball FBGA package. Built on 45 nm CMOS technology and operating from a 1.2 V core supply, it combines programmable logic, 266 user I/O, and embedded block RAM in a single device. The -2 speed grade supports designs requiring predictable general-purpose FPGA performance, while the commercial temperature option covers 0°C to 85°C. A field-programmable gate array, or FPGA, is a semiconductor whose logic, interconnects, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, where it sits above fixed-function logic devices and provides parallel hardware implementation for control, signal processing, communications, and interface functions. Its value comes from combining substantial configurable logic density with reusable intellectual property cores, allowing one package to replace multiple conventional logic components. The Spartan-6 LX family provides 24,051 logic cells for this device, 266 I/O, and 45 nm CMOS fabrication. The -2 designation identifies its performance grade, while the 484-ball package supports dense board routing through an array of solder-ball connections. The device is identified as lead-free and RoHS compliant in the supplied component data. These characteristics make it relevant to industrial control, communications, instrumentation, embedded signal processing, and general-purpose prototyping systems. At the architecture level, the Spartan-6 LX FPGA combines configurable logic blocks with dedicated block RAM and programmable I/O resources. This mixed architecture allows parallel datapaths and state machines to be implemented without relying on a processor for every control function. The supplied data identifies a 500 MHz internal frequency, while actual interface and system timing remain dependent on the selected I/O standards, clocking implementation, board-level routing, external memory interface, and the selected design tools. Typical uses include industrial automation controllers, serial and parallel protocol bridges, data-acquisition front ends, communications equipment, and embedded DSP functions. Its 266 I/O count is particularly useful when a design must connect multiple buses, capture parallel sensor data, or bridge legacy peripheral logic to a modern system. The 484-ball FBGA also reduces board area compared with a large leaded package, but it demands careful escape routing and assembly control. A primary design consideration is package and PCB complexity. Unlike a fine-pitch QFP, the 484-ball FBGA is not visually inspectable after assembly and requires appropriate land patterns, via-in-pad or escape-routing rules, X-ray inspection capability, and controlled solder-assembly profiles. Designers should also confirm power sequencing, decoupling, clock integrity, and I/O voltage compatibility against the complete AMD device documentation before layout release. This page consolidates the verified device identity, package information, commercial listing, and cross-reference findings into an engineering-focused product record. It also distinguishes true package-compatible Spartan-6 options from unrelated FPGA families, helping procurement and hardware teams assess interchangeability without assuming that equivalent logic density guarantees interchangeable pinout, timing, or qualification.

RFQ رابطہ
XC6SLX25-2FG484I - 24,051-Cell Spartan-6 LX FPGA | AMD
XC6SLX25-2FG484I

XC6SLX25-2FG484I - 24,051-Cell Spartan-6 LX FPGA | AMD

AMD/Xilinx XC6SLX25-2FG484I is a Spartan-6 LX FPGA with 24,051 logic cells, 266 I/O, 45 nm CMOS technology, 1.2 V operation, and a 484-pin FBGA package. The -2 speed grade is designed for industrial-temperature operation from 0 C to 85 C, as identified in the verified component listings. The device combines programmable logic, block RAM, DSP resources, and programmable I/O in a single FPGA package, making it suitable for embedded control, communications, industrial automation, signal processing, and general-purpose digital design. Its 484-ball package provides a high-density interconnect arrangement for designs requiring numerous external interfaces. The Spartan-6 LX FPGA family is a programmable-logic device family within the broader FPGA and semiconductor hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA allows logic behavior, interfaces, and signal processing to be configured after manufacture. This flexibility supports design revisions, shorter product-development cycles, and consolidation of multiple control functions into one programmable device when appropriate system partitioning and validation are performed. Key verified characteristics include 24,051 logic cells, 266 I/O, 1.2 V operation, 45 nm CMOS construction, and a 484-pin FBGA package. The -2 speed grade provides a defined performance class within the Spartan-6 LX family. The I/O count makes the device suitable for systems requiring parallel buses, multiple control signals, external memory interfaces, converters, and communication transceivers. Because the package is ball-grid and densely routed, PCB layout requires careful ball assignment, power planning, decoupling, and signal-integrity review. Typical uses include industrial PLC and automation controllers, embedded instrumentation, communications equipment, video and image-processing front ends, and low-power control subsystems. The FPGA can implement parallel algorithms, state machines, protocol bridges, and control logic in parallel, reducing reliance on multiple discrete controllers. Its programming flexibility also allows firmware-like field updates when the surrounding flash and configuration architecture are included. Design considerations center on thermal performance, decoupling, configuration, and high-speed board layout. The 1.2 V core and dense 484-ball package require multiple supply rails and careful placement of bypass capacitors. Designers should use the AMD Spartan-6 package pinout and device documentation for exact ball assignments, power sequencing, configuration pins, and I/O standards before layout release. This page combines verified distributor and manufacturer-source information with package, purchasing, and engineering guidance designed to make the XC6SLX25-2FG484I selection process faster.

RFQ رابطہ
XC6SLX25-2FGG484C - 24K Spartan-6 LX FPGA | AMD
XC6SLX25-2FGG484C

XC6SLX25-2FGG484C - 24K Spartan-6 LX FPGA | AMD

The AMD XC6SLX25-2FGG484C is a Spartan-6 LX field-programmable gate array with 24,051 logic cells, 1,879 configurable logic blocks, and a 500 MHz internal frequency, supplied in a lead-free FBGA package. The device uses 45 nm CMOS technology and supports a 1.2 V core supply. Its industrial temperature option is specified for 0°C to 85°C, making it suitable for embedded control, communications, industrial automation, and signal-processing systems requiring a compact, programmable logic implementation. An FPGA is a semiconductor whose digital behavior is configured after manufacture. It belongs to the programmable-logic hierarchy, combining configurable logic blocks, programmable I/O, memory resources, clocking, and dedicated hard IP into one integrated device. Compared with a fixed-function application-specific integrated circuit, an FPGA permits design revisions, parallel processing, adaptable interfaces, and shorter development cycles when system requirements evolve. The Spartan-6 LX family targets low-cost, low-power programmable designs while retaining a large selection of dedicated resources. The XC6SLX25 provides 24,051 logic cells and 1,879 configurable logic blocks, giving designers more parallel capacity than small CPLDs. Its -2 speed designation identifies the middle Spartan-6 performance option, while the C suffix denotes the commercial operating-temperature grade. The package combines a 484-ball grid with approximately 0.80 mm ball pitch and dimensions listed as 15 mm by 15 mm. Programmable logic is complemented by block RAM, dedicated DSP resources, clock-management circuitry, and high-speed I/O paths. These resources allow designers to implement parallel data paths, protocol bridges, control logic, and fixed-point processing without relying on multiple discrete devices. The internal frequency of 500 MHz establishes the device’s published logic-performance reference, while actual interface throughput depends on the selected I/O standard, clocking, timing constraints, and design implementation. Typical uses include industrial control panels, motor and motion controllers, test equipment, embedded communications, video and image processing, and general-purpose embedded systems. The Spartan-6 architecture is particularly useful when a design requires deterministic parallel logic, numerous peripheral interfaces, or field programmability. It also helps consolidate small CPLD, microcontroller, and discrete logic functions into a single device when board space and inventory reduction are priorities. Board design must account for the dense FBGA footprint, numerous power and ground connections, high-speed I/O constraints, and thermal-management requirements. Use the AMD Spartan-6 package pinout files and the manufacturer’s design-support documentation to assign balls and implement the power grid. Validate power sequencing, decoupling, signal integrity, and timing with the appropriate FPGA implementation flow before releasing the PCB. This page combines device specifications, commercial sourcing guidance, same-package alternatives, comparison criteria, and practical implementation notes. It is intended to help engineers identify the correct Spartan-6 option, assess whether an alternative can replace the target without PCB changes, and plan a robust implementation around the FGG484 package.

RFQ رابطہ
XC6SLX25-2FGG484I - Spartan-6 FPGA 24051 Cells | AMD
XC6SLX25-2FGG484I

XC6SLX25-2FGG484I - Spartan-6 FPGA 24051 Cells | AMD

The AMD XC6SLX25-2FGG484I is a Field Programmable Gate Array (FPGA) from the Spartan-6 LX family, built on a mature 45 nm low-power copper process technology. It delivers 24,051 logic cells, 958,464 bits of block RAM, and 266 user I/O pins in a 484-ball FBGA package (23x23 mm, 1 mm pitch). The device operates at a core voltage of 1.2V and supports internal clock frequencies up to 500 MHz, with a -2 speed grade providing a balanced performance-power trade-off. An FPGA is an integrated circuit that can be programmed after manufacturing to implement any digital logic function. FPGAs belong to the programmable logic device (PLD) family, which sits between ASICs and general-purpose processors in the semiconductor hierarchy. They offer reconfigurability, parallel processing, and low non-recurring engineering costs, making them ideal for prototyping, low-to-mid volume production, and applications requiring hardware flexibility. Key features of the XC6SLX25-2FGG484I include 24,051 logic cells, 52 DSP48A1 slices, 958,464 bits of block RAM, and support for multiple I/O standards including LVCMOS, LVDS, and SSTL. The device also features integrated memory controllers, clock management tiles (CMT) with PLL and DCM, and support for PCI Express (in LXT variants). The -2 speed grade offers a balance between performance and power consumption, with a maximum internal frequency of 500 MHz. The Spartan-6 family is designed for high-volume, cost-sensitive applications, offering half the power consumption of previous Spartan families. The 45 nm process technology enables high logic density and low static power. The device includes advanced power management features such as suspend mode and partial reconfiguration support, allowing dynamic power optimization in battery-powered systems. Typical applications include industrial automation, automotive infotainment, medical imaging, communications infrastructure, and video processing. The 484-ball FBGA package provides ample I/O for interfacing with external memory, ADCs, DACs, and high-speed serial transceivers (in LXT variants). The industrial temperature grade (-40°C to +100°C) makes it suitable for harsh environments. When designing with this FPGA, ensure proper decoupling of the 1.2V core supply and 2.5V/3.3V auxiliary supplies. Use the configuration pins (MODE, DONE, PROG_B) for reliable device programming. The device supports multiple configuration modes including Master SPI, Slave SelectMAP, and JTAG, providing flexibility in system design.

RFQ رابطہ
XC6SLX25-2FT256I - Spartan-6 LX FPGA, 24K Logic Cells | AMD
XC6SLX25-2FT256I

XC6SLX25-2FT256I - Spartan-6 LX FPGA, 24K Logic Cells | AMD

The AMD (formerly Xilinx) XC6SLX25-2FT256I is a Spartan-6 LX Field-Programmable Gate Array (FPGA) integrating 24,051 logic cells, 1,879 Configurable Logic Blocks (CLBs), and 958 Kbits of block RAM in a 256-ball Fine-Pitch Thin Ball Grid Array (FTBGA-256) package. It is built on a 45 nm CMOS process, supports up to 186 user I/O, and runs at internal frequencies up to 500 MHz in this -2 (standard performance) and -I (industrial temperature, -40C to +100C) grade. A Field-Programmable Gate Array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and dedicated silicon resources such as block RAM, DSP slices, and clock-management tiles (CMTs). FPGAs occupy the middle ground between fixed-function ASICs and software-driven microcontrollers: they deliver ASIC-class parallelism and data-path throughput while remaining fully re-programmable in the field. The Spartan-6 LX family is positioned at the low-cost, low-power end of the AMD/Xilinx FPGA portfolio and is widely used in bridging, motor control, video processing, and industrial automation. Key features of the XC6SLX25-2FT256I include 24,051 logic cells, 1,879 CLBs, 4,824 Kbits of distributed RAM, 38 DSP48A1 slices running up to 390 MHz, 2 CMTs for PLL-based clock management, and a 32-bit MultiBoot configuration controller. Industrial temperature grade -I supports -40C to +100C operation. The FT256 package provides 186 user I/O across 256 balls with 1.0 mm pitch and 17 x 17 mm body. The -2 speed grade offers the standard balance of performance and power consumption for cost-sensitive embedded designs. The architecture pairs 6-input Look-Up Tables (LUT6) with dual flip-flops per slice, enabling efficient state-machine and pipelined datapath implementations. The Memory Controller Block (MCB) supports DDR, DDR2, DDR3, and LPDDR external memories at up to 800 Mb/s, while the SelectIO technology supports voltages from 1.2 V to 3.3 V on the same bank. Typical applications include industrial control and bridging, automotive infotainment head units, motor and servo drive feedback, low-cost video processing, custom glue logic replacement, and consumer electronics requiring low-power parallel DSP. The wide temperature grade also makes it suitable for factory automation and outdoor display systems. When designing with this part, note that Spartan-6 FPGAs require a separate configuration memory or JTAG programming interface; the device does not boot from internal flash. Plan the bank I/O voltage ahead of placement to avoid level-shifter overhead. This page consolidates distributor pricing for the AMD XC6SLX25-2FT256I, drop-in FT256 Spartan-6 variants, and practical design notes that go beyond the manufacturer datasheet summary.

RFQ رابطہ
XC6SLX25-2FTG256C - 24,051-Cell Spartan-6 FPGA | AMD
XC6SLX25-2FTG256C

XC6SLX25-2FTG256C - 24,051-Cell Spartan-6 FPGA | AMD

AMD XC6SLX25-2FTG256C is a Spartan-6 LX field-programmable gate array with 24,051 logic cells, 186 I/O sites, a 500 MHz internal frequency, and a 256-ball lead-free BGA package. The -2 speed grade targets the middle performance class of the Spartan-6 LX family, while the C suffix denotes the commercial temperature range of 0°C to 85°C. Its combination of programmable logic resources and 936 kbit of embedded block RAM supports parallel data processing, control, interface, and embedded-system functions. A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture. An FPGA combines configurable logic blocks, block RAM, programmable I/O, clocking, and dedicated fabric into a single device. Within the product hierarchy, the XC6SLX25 is a Spartan-6 LX FPGA, which belongs to the broader FPGA and programmable-logic device family. Compared with fixed-function logic, an FPGA allows design revisions, parallel interfaces, hardware acceleration, and application-specific sequencing to be implemented in one board revision. The device provides 1,879 logic cells and 3,758 adaptive logic modules according to the published technical listing, together with 936 kbit of embedded memory and 186 I/O. These figures distinguish it from the smaller XC6SLX9 and XC6SLX16 devices in the same family. The 500 MHz internal frequency provides a clear performance reference for clocked digital designs, although actual system performance also depends on the selected architecture, routing, memory interface, and external components. The FTG256 package is identified as a lead-free 256-ball BGA for this device, and the commercial-grade operating range is 0°C to 85°C. A BGA package supports dense PCB routing and is appropriate for compact industrial, communications, control, test, and embedded-processing systems. Because no large exposed thermal pad is indicated for this package, board construction should be reviewed for heat spreading and soldering-process requirements before volume production. Typical uses include industrial control logic, data-acquisition front ends, communications protocol conversion, embedded video and networking interfaces, instrumentation, and hardware accelerators. The 186 available I/O sites are particularly useful for parallel buses, counters, status signals, memory interfaces, and multi-channel data paths. The 936 kbit of embedded RAM allows buffering, packet storage, frame data, lookup tables, and general-purpose on-chip memory. Designers should verify the exact FTG256 ball map, differential-I/O rules, power rails, decoupling, configuration interface, and unused-pin treatment against AMD's Spartan-6 package documentation. PCB layout should preserve short return paths and adequate BGA escape routing, while the clocking and memory interfaces should be constrained according to the device timing specifications. This product page combines the key device specifications, practical integration guidance, commercial sourcing information, and same-package alternatives. It also distinguishes genuine pin-compatible choices from devices in different packages, helping engineers evaluate an FPGA replacement without assuming that similar logic capacity guarantees PCB compatibility.

RFQ رابطہ
XC6SLX25-2FTG256I - 24K Cell Spartan-6 FPGA | AMD
XC6SLX25-2FTG256I

XC6SLX25-2FTG256I - 24K Cell Spartan-6 FPGA | AMD

AMD XC6SLX25-2FTG256I is a Spartan-6 LX field-programmable gate array with 24,051 logic cells, 1,879 configurable logic blocks, 3,758 adaptive logic modules, and 186 user I/Os in a 256-ball FTG256 lead-free BGA package. The -2 speed grade targets a 375 MHz operating performance class, while the industrial suffix indicates an intended operating temperature range of 0°C to 85°C. A field-programmable gate array is a semiconductor whose digital logic, memory, interfaces, and signal paths are configured after manufacture. Within the product hierarchy, an FPGA sits above programmable logic devices and system-programmable semiconductor devices, combining configurable logic, block RAM, digital clock managers, and programmable I/O in one device. The Spartan-6 LX family targets cost-sensitive industrial, consumer, communications, and embedded-control systems requiring substantial parallel processing capability. The XC6SLX25-2FTG256I provides 24,051 logic cells organized into 1,879 CLBs and 3,758 ALMs, along with 186 I/Os. Its integrated DCM and PLL resources support clock generation and phase-shifted clock distribution, while the core supply range is 1.14 V to 1.26 V. The 45 nm CMOS implementation and 256-ball package support dense board layouts without requiring a larger-footprint package. The device is categorized as a Spartan-6 LX FPGA with 3,758 adaptive logic modules and 24,051 logic elements. A comparison listing identifies 1,879 CLBs and a 667 MHz figure for the broader device record, while another specification source describes the target -2 grade at 375 MHz. Designers should therefore use the AMD Spartan-6 family data sheet and the selected speed-grade tables when establishing timing constraints rather than treating aggregate comparison figures as interchangeable timing guarantees. Typical uses include industrial control and factory automation, parallel sensor aggregation, communications infrastructure, display and video interfaces, embedded instrumentation, and compact control systems with many parallel I/O requirements. The 186 available I/Os make the device suitable for bridging external memory, capturing parallel sensor data, and coordinating multiple digital peripherals without requiring several discrete logic devices. When laying out the PCB, follow AMD's FTG256 package pinout files, verify all bank power and ground connections, and decouple each supply rail close to its package pins. Because unused balls can differ across Spartan-6 device densities, use the package files for the exact XC6SLX25 variant and review no-connect assignments before finalizing the board design. This product page combines the XC6SLX25-2FTG256I specifications, package and temperature details, speed-grade alternatives, practical design guidance, and application-specific engineering context to support faster component selection and PCB planning.

RFQ رابطہ
XC6SLX25-3CSG324C - Spartan-6 LX FPGA with 226 I/O | AMD
XC6SLX25-3CSG324C

XC6SLX25-3CSG324C - Spartan-6 LX FPGA with 226 I/O | AMD

AMD XC6SLX25-3CSG324C is a Spartan-6 LX field-programmable gate array in a 324-LFBGA CSPBGA package with 226 I/O. The device combines programmable logic, fixed hardware resources, and configurable digital interfaces in one programmable-logic device, making it suitable for embedded control, data acquisition, communication, and industrial automation systems. Its CSG324 designation identifies the 324-ball chip-scale ball-grid-array package, while the LX25 position identifies the Spartan-6 LX resource class. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is defined after manufacture through a configuration bitstream. FPGA architecture sits within programmable-logic devices and can be connected to processors, memory, analog circuits, or mixed-signal systems. Compared with a fixed-function application-specific integrated circuit, an FPGA allows parallel processing, custom interfaces, and design updates to be implemented in programmable logic. The Spartan-6 LX family therefore supports adaptable digital architectures where timing, I/O density, and system flexibility are important. The XC6SLX25-3CSG324C is identified as a Spartan-6 LX FPGA with 226 I/O in a 324-LFBGA CSPBGA package. Its fine-pitch ball-grid-array construction supports compact, high-density PCB layouts and broad external connectivity. The -3 portion of the ordering code identifies the device speed grade, allowing the design to use a defined Spartan-6 performance class rather than a generic or ungraded device. The CSG324 package designation must remain unchanged when creating a footprint or planning board-level replacement. Programmable logic devices combine configurable logic fabric with dedicated resources for functions such as clocking, memory, and high-speed I/O. Spartan-6 devices are commonly used where parallel data paths, deterministic control, specialized protocol handling, or prototype acceleration are required. The XC6SLX25 designation denotes the LX25 member of the Spartan-6 LX family, while the 226-I/O listing highlights the high level of package connectivity available for external memory, transceivers, sensors, and communications equipment. Typical applications include industrial control systems, instrument interfaces, embedded serial bridges, video and image-processing front ends, communications equipment, and test-and-measurement systems. In each case, the FPGA can implement parallel acquisition paths or protocol engines while external devices provide sensing, power conversion, and physical-layer connectivity. The 324-ball package is especially useful when the board design requires more routing flexibility than a smaller leaded or low-pin-count package can offer. PCB design should use the AMD Spartan-6 package drawing and pinout files when assigning every BGA ball, configuring power rails, and planning escape routing. Confirm the appropriate speed, temperature, and lifecycle requirements for the production configuration rather than substituting an ordering code solely from the device-family pattern. The fine-pitch BGA also requires qualified assembly processes, appropriate solder-paste stencil design, and inspection coverage for reliable volume manufacturing. This product page combines the exact package and ordering information, practical implementation guidance, structured comparisons, and engineering-oriented search coverage. It also distinguishes true same-package ordering variants from devices with different packages or resource classes, helping designers evaluate replacements without overlooking PCB compatibility, grade, and qualification constraints.

RFQ رابطہ
XC6SLX25-3CSG324I - Spartan-6 LX FPGA, 324 CSBGA | AMD/Xilinx
XC6SLX25-3CSG324I

XC6SLX25-3CSG324I - Spartan-6 LX FPGA, 324 CSBGA | AMD/Xilinx

The AMD/Xilinx XC6SLX25-3CSG324I is a Spartan-6 LX field-programmable gate array in a 324-pin CSBGA package. The device is identified as the -3 speed grade and contains 24,051 programmable logic cells, with an internal frequency listed as 500 MHz. Its 15 x 15 mm lead-free package uses a 0.80 mm pitch and is designated MO-275. A field-programmable gate array is a reconfigurable digital semiconductor used to implement control logic, interfaces, signal processing, and embedded system functions after fabrication. The Spartan-6 family belongs to the FPGA and CPLD hierarchy and combines programmable logic, configurable I/O, memory resources, and clocking resources in one device. This makes the XC6SLX25 useful when a design needs programmable hardware rather than a fixed application-specific integrated circuit. The XC6SLX25-3CSG324I provides 24,051 logic cells and a stated internal frequency of 500 MHz. Its -3 speed designation identifies the highest-performance Spartan-6 LX speed grade described in the product information. The device is offered in a 324-CSBGA package with 0.80 mm pitch, so the PCB land pattern, via arrangement, assembly process, and thermal design must be based on the AMD Spartan-6 package documentation. The device is identified as operating from 0 C to 85 C in the product listing. The lead-free package designation is important for manufacturing environments using controlled soldering processes and solder-material requirements. The device is intended for designers creating parallel logic, embedded control, communications, instrumentation, and industrial automation systems with programmable FPGA architectures. Typical design considerations include high-speed board routing, careful power and ground distribution, BGA assembly capability, and validation of the exact pinout and package files before PCB release. The AMD Spartan-6 package pinout files should be used for the physical implementation, while the Spartan-6 FPGA Data Sheet DS162 should be used for DC and switching characteristics. This page combines the device specifications, package information, sourcing guidance, comparison points, and practical design notes needed to evaluate the XC6SLX25-3CSG324I for an FPGA-based system.

RFQ رابطہ
XC6SLX25-3FG484C - Spartan-6 LX FPGA | AMD Xilinx
XC6SLX25-3FG484C

XC6SLX25-3FG484C - Spartan-6 LX FPGA | AMD Xilinx

Advanced Micro Devices, Inc. XC6SLX25-3FG484C is a Spartan-6 LX field-programmable gate array built on 45 nm CMOS technology, with 24,051 configurable logic cells, a 1.2 V core supply, and a 500 MHz internal frequency in a 15 x 15 mm lead-free CSBGA package. The -3 speed grade is identified as the highest-performance Spartan-6 LX grade in the supplied technical documentation. A field-programmable gate array, or FPGA, is a programmable logic device that combines configurable logic, programmable I/O, and dedicated processing resources on one semiconductor die. FPGAs occupy the programmable-logic hierarchy between fixed-function logic ICs and higher-end adaptive computing devices. They allow hardware functions to be revised through configuration bitstreams rather than redesigning a custom ASIC, reducing prototype cycles and supporting field upgrades. The XC6SLX25-3FG484C provides 24,051 logic cells and 1,879 configurable logic blocks, according to the indexed Spartan-6 comparison data. Its 500 MHz internal-frequency listing makes it suitable for parallel logic, state-machine, control, interface, and signal-processing designs that require deterministic hardware operation. The 484-BBGA package also exposes substantially more connection options than a small quad-flat package. The device combines configurable logic with DSP48 processing resources and dedicated block RAM for filtering, transforms, communications encoding, and other data-intensive functions. Its 45 nm CMOS implementation and 1.2 V core voltage place it in the Spartan-6 generation designed to balance programmable logic capacity, I/O connectivity, power efficiency, and cost for cost-sensitive, high-volume equipment. Typical uses include industrial automation and control, video-processing pipelines, communications infrastructure, instrumentation, embedded systems, and interface consolidation. The 24,051-cell Spartan-6 LX device is particularly appropriate when parallel datapath logic, moderate DSP requirements, and extensive package I/O are needed without moving immediately to a larger FPGA or developing a custom ASIC. Design planning must account for the BGA escape routing, decoupling, clock integrity, configuration memory, and thermal performance of a 484-ball package. Although the indexed operating-temperature range is 0 to 85 °C, thermal design should be evaluated for the actual board, enclosure, airflow, and activity level rather than relying only on the commercial temperature designation. This product record combines verified distributor availability, exact package and device identifiers, Spartan-6 family specifications, drop-in same-package comparisons, and procurement-oriented guidance. It distinguishes confirmed data from unavailable numeric pricing, pin-by-pin mapping, and detailed power characteristics so engineers can make sourcing and design decisions without relying on inferred values.

RFQ رابطہ
XC6SLX25-3FG484I - 24,051-Cell Spartan-6 LX FPGA | AMD
XC6SLX25-3FG484I

XC6SLX25-3FG484I - 24,051-Cell Spartan-6 LX FPGA | AMD

AMD/Xilinx XC6SLX25-3FG484I is a Spartan-6 LX field-programmable gate array with 24,051 logic cells, 266 I/O, and 500 MHz internal frequency, supplied in a 484-BBGA package. The -3 speed grade represents the highest-performance Spartan-6 LX grade identified in the verified product data. Its 45 nm CMOS construction and 484-ball surface-mount package support compact industrial, communications, control, and embedded-processing systems where programmable logic is required. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and peripheral functions are configured after manufacture. The FPGA hierarchy extends from configurable logic blocks and programmable interconnect to FPGA, programmable logic device, and digital semiconductor. Compared with a fixed-function application-specific integrated circuit, an FPGA allows interface changes, parallel processing, and hardware customization to be implemented in a single device while retaining the flexibility of field updates. The XC6SLX25-3FG484I combines 24,051 logic cells with 266 available I/O in a 484-BBGA package. The verified data identifies a 500 MHz internal frequency, a -3 speed designation, and operation from 0°C to 85°C. Its 484-ball format supports substantially denser board routing than a low-pin-count FPGA package, while the 15 mm by 15 mm body and 0.80 mm ball pitch provide a practical high-density footprint for multilayer PCB layouts. The Spartan-6 LX architecture is positioned between fixed logic and higher-end programmable SoC devices. Its logic resources can implement parallel data acquisition, protocol conversion, control state machines, and interface bridging, while its I/O count allows multiple external buses and high-speed links to converge on one package. The -3 grade favors designs in which timing performance is more important than the lower power or lower cost associated with slower speed grades. Typical uses include industrial automation, embedded control, communications equipment, test and measurement systems, signal processing, and generic embedded processing. The 266 I/O are useful when a design must connect external memories, transceivers, converters, and control peripherals. The 500 MHz internal frequency also provides a meaningful clocking target for pipelined logic, provided that board-level timing closure is completed with the selected toolchain and design constraints. Engineers should treat the 484-BBGA as a demanding fine-pitch package. PCB design must provide adequate escape routing, power and ground planes, via access, and thermal spreading. The verified sources expose a pinout-file resource, but the complete 484-ball pin map and exact power requirements were not included in the supplied data; those details must therefore be confirmed against the manufacturer package files and datasheet before release. This product record combines verified distributor availability information, exact device identity, package characteristics, and practical design considerations with same-family replacement guidance. It distinguishes confirmed facts from unresolved parameters and avoids presenting an unverifiable pinout, price schedule, or cross-vendor equivalence as established data.

RFQ رابطہ
XC6SLX25-3FGG484C - 24,051-Cell Spartan-6 FPGA | AMD
XC6SLX25-3FGG484C

XC6SLX25-3FGG484C - 24,051-Cell Spartan-6 FPGA | AMD

The AMD XC6SLX25-3FGG484C is a Spartan-6 LX field-programmable gate array built on 45 nm CMOS technology, with 24,051 logic cells, 266 I/O, a 1.2 V supply, and a 484-pin FBGA package. It combines programmable logic, dedicated DSP resources, block RAM, and selectable I/O standards in one device. The -3 speed designation identifies the higher-performance Spartan-6 LX grade, while the FGG484C suffix identifies the commercial-temperature, lead-free 484-ball package configuration. An FPGA is a semiconductor whose digital logic is configured after manufacture. Within the product hierarchy, the XC6SLX25-3FGG484C is a Spartan-6 LX FPGA, a programmable-logic device, and an integrated circuit. This classification places it between fixed-function logic and software-driven processors: parallel processing elements can execute filtering, control, protocol, and interface tasks concurrently after the device is programmed. The principal device-level characteristics are 24,051 logic cells, 266 user I/O, 45 nm CMOS fabrication, and a 1.2 V core supply. Its integrated system integration features allow a compact implementation to combine multiple digital functions without requiring separate logic devices. Block RAM supports data buffering and storage, while DSP resources accelerate arithmetic-heavy signal-processing pipelines. The broad I/O count also makes the device suitable for designs requiring substantial external connectivity. Spartan-6 devices use selectable I/O standards and programmable logic resources to balance performance, power, and cost. The -3 grade is intended for designs that prioritize operating speed over the lower-speed family members. Because the exact I/O-standard list, memory quantities, DSP-slice counts, differential-I/O limits, and performance timing values are not established by the product listing, engineers should confirm those details against the Spartan-6 family documentation before finalizing a high-speed or I/O-intensive design. Typical uses include industrial control, video and image processing, communications infrastructure, instrumentation, embedded signal processing, and general-purpose digital logic consolidation. The device is especially useful when parallel throughput, deterministic hardware implementation, and flexible I/O assignment matter more than software flexibility. Its 484-pin FBGA package requires careful PCB escape-routing and multilayer assembly planning. Design around the 1.2 V core supply with separate, properly decoupled rails for all specified supply domains. Follow the Spartan-6 package pinout file for ball assignments and verify every high-speed interface against the published I/O and timing constraints. Programming should use a compatible configuration interface and supported device-support flow, with configuration storage, clocking, and reset arranged to avoid contention during startup. This product record combines the exact device identity, core specifications, sourcing links, same-footprint alternatives, and application-focused design guidance. It supports initial device selection while directing detailed I/O, timing, power, and PCB decisions to the manufacturer documentation.

RFQ رابطہ
XC6SLX25-3FGG484I - Spartan-6 FPGA 24051 Cells | AMD
XC6SLX25-3FGG484I

XC6SLX25-3FGG484I - Spartan-6 FPGA 24051 Cells | AMD

The AMD XC6SLX25-3FGG484I is a member of the Spartan-6 LX family of Field Programmable Gate Arrays (FPGAs), fabricated using a 45nm CMOS process technology. It features 24,051 logic cells, 1,879 configurable logic blocks (CLBs), and 958,464 total RAM bits, providing a balanced mix of logic density and memory resources for a wide range of digital designs. The device is offered in a 484-ball FBGA package (23x23 mm) with 266 user I/O pins, supporting diverse interface standards and flexible I/O configurations. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the designer after manufacturing, allowing for custom digital logic implementation. FPGAs belong to the programmable logic device (PLD) family, which sits between fixed-function ASICs and general-purpose processors in terms of flexibility and performance. The Spartan-6 series is optimized for low power and cost-sensitive applications, making it a popular choice for industrial, automotive, and telecommunications systems. Key features of the XC6SLX25-3FGG484I include a speed grade of -3, which is the highest performance grade available for Spartan-6 LX devices, enabling faster clock frequencies and improved timing margins. The device operates from a 1.2V core supply (1.14V to 1.26V range) and supports multiple I/O standards, including LVCMOS, LVDS, and HSTL. It also includes dedicated DSP48A1 slices and block RAM for efficient implementation of arithmetic and memory-intensive functions. From a technical perspective, the Spartan-6 architecture incorporates a 6-input look-up table (LUT) fabric, advanced clock management tiles (CMTs) with PLLs and DCMs, and high-speed serial transceivers (in LXT variants). The -3 speed grade provides a maximum internal frequency of 500 MHz, as noted in the datasheet, enabling high-throughput designs. The device is RoHS compliant and lead-free, meeting modern environmental standards. Typical applications for the XC6SLX25-3FGG484I include industrial automation, telecommunications infrastructure, automotive electronics, and video/image processing. Its combination of logic density, I/O count, and low power consumption makes it suitable for bridging, protocol conversion, and real-time control tasks. When designing with this FPGA, careful attention must be paid to power supply decoupling and PCB layout to ensure signal integrity at high speeds. The device requires multiple supply rails (VCCINT, VCCAUX, VCCO) and proper sequencing during power-up. Refer to the Spartan-6 FPGA datasheet and PCB design guidelines for detailed recommendations.

RFQ رابطہ
XC6SLX25-3FT256C - 24,051-Cell Spartan-6 LX FPGA | AMD
XC6SLX25-3FT256C

XC6SLX25-3FT256C - 24,051-Cell Spartan-6 LX FPGA | AMD

The Xilinx XC6SLX25-3FT256C is a Spartan-6 LX field-programmable gate array with 24,051 logic elements, 186 I/O, a 1.2 V core supply, and a 256-pin FTBGA package. Built with 45 nm CMOS technology, this FPGA combines 3,758 adaptive logic modules, 1,879 configurable logic blocks, and 936 kbit of embedded memory in a compact 17 x 17 mm package. The -3 designation identifies the device performance grade, while the 256 suffix identifies the 256-ball package configuration. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. The Spartan-6 LX FPGA family belongs to the broader FPGA hierarchy, which sits between fixed-function logic ICs and programmable ASICs. It combines hardware parallelism, field-updatable configuration, and deterministic control capabilities for systems requiring custom logic, interface adaptation, or signal processing. The verified device data identifies 3,758 adaptive logic modules, 1,879 configurable logic blocks, 936 kbit of embedded memory, and 186 I/O. Its 45 nm CMOS implementation operates from a 1.2 V core, making it appropriate for compact embedded systems where power, board area, and computational throughput must be balanced. The Spartan-6 architecture also supports programmable logic blocks, block RAM, digital signal processing resources, and dedicated input/output functions, although individual resource counts beyond those published here require confirmation in the manufacturer documentation. The XC6SLX25 device is positioned between smaller Spartan-6 LX members and larger LX fabrics. Compared with the XC6SLX9, it provides substantially more configurable logic and embedded memory, making it suitable for multi-channel control, protocol bridging, and parallel data processing. The verified XC6SLX25 comparison data also lists a 667 MHz performance figure, but the exact relationship between that figure and the -3 speed suffix should be confirmed against the applicable AMD/Xilinx device documentation for the intended design. Typical uses include industrial automation, communications equipment, embedded control, video and image processing, sensor acquisition, and compact embedded platforms. The 186 I/O provide substantial board-level connectivity, while the 936 kbit of embedded memory can support buffering, packet handling, and control functions without relying entirely on external memory. These resources make the device useful for designs combining a processor or microcontroller with dedicated high-speed or parallel logic. Designers should use the official Spartan-6 package pinout and power-guidance documents rather than inferring BGA connectivity from a generic package drawing. PCB layout must provide the specified core and I/O supplies, decoupling, clocking, configuration storage, and exposed-pad thermal treatment. Because the supplied data does not contain the complete 256-ball pinout or recommended operating ranges, those details remain data-needed rather than being inferred. This product page consolidates the verified 24,051-cell, 1.2 V, 45 nm, 256-pin device attributes, current distributor pricing, same-family drop-in candidates, and practical replacement guidance. It provides engineering context that is not available from a distributor inventory listing alone, while clearly separating verified facts from documentation that still requires confirmation.

RFQ رابطہ
XC6SLX25-3FT256I - 24,051-Cell Spartan-6 LX FPGA | AMD
XC6SLX25-3FT256I

XC6SLX25-3FT256I - 24,051-Cell Spartan-6 LX FPGA | AMD

AMD XC6SLX25-3FT256I is a Spartan-6 LX field-programmable gate array with 24,051 logic cells, 1,879 configurable logic blocks, 186 I/O, and a maximum internal frequency of 500 MHz, housed in a 256-ball lead-free LBGA package measuring 17 x 17 mm. It uses 45 nm CMOS technology and operates from a 1.2 V core supply. The -3 speed grade is identified as the highest-performance Spartan-6 LX grade, while the industrial suffix identifies the specified operating-temperature version. A field-programmable gate array is a programmable logic device that converts a digital design into an interconnected array of configurable logic blocks and programmable I/O. In the product hierarchy, an FPGA is a programmable logic semiconductor, a broader category than a fixed-function application-specific integrated circuit. The Spartan-6 LX family balances programmable logic capacity, embedded memory, connectivity, and cost for embedded, industrial, communications, and signal-processing systems. Key features include 24,051 logic cells organized into 1,879 CLBs, 3,758 adaptive logic modules, and 936 kbit of embedded memory according to the comparison data retrieved for this family. The device provides 186 user I/O and uses a 256-ball lead-free package. Its 500 MHz internal-frequency listing, -3 performance grade, 45 nm CMOS construction, and 1.2 V core supply make it suitable for designs requiring substantial parallel processing without moving to a larger FPGA family. The LX device architecture combines programmable logic, block RAM, digital signal processing resources, general-purpose I/O, clock management, and dedicated configuration capabilities. These resources allow designers to implement parallel datapaths, control logic, protocol interfaces, and data acquisition functions in one device. The 24,051-cell capacity also permits more substantial consolidation than small CPLDs, while the 256-ball package provides a defined route for dense, board-level integration. Typical applications include industrial automation, embedded control, communications infrastructure, instrumentation, data acquisition, and digital signal processing. The target part is particularly relevant when a design must combine moderate-to-high logic density with a 256-ball Spartan-6 LX footprint and the -3 speed grade. Designers should also verify power, configuration, memory interface, and pin constraints against their complete system requirements. A critical design step is to match the exact device variant, package drawing, exposed-pad treatment, and PCB land pattern before production. Configuration storage, clocking, decoupling, signal integrity, and thermal performance must be reviewed against AMD's Spartan-6 documentation. Do not infer full pin compatibility from a shared ball count alone. This page consolidates verified distributor specifications, exact package information, source links, and drop-in alternatives with engineering-oriented selection guidance. It also distinguishes documented facts from parameters that require confirmation, providing a more practical basis for procurement and hardware planning than a distributor listing alone.

RFQ رابطہ
XC6SLX25-3FTG256C - 24,051-LE Spartan-6 FPGA | AMD
XC6SLX25-3FTG256C

XC6SLX25-3FTG256C - 24,051-LE Spartan-6 FPGA | AMD

The AMD XC6SLX25-3FTG256C is a Spartan-6 LX field-programmable gate array with 24,051 logic cells, 3,758 adaptive logic modules, 936 kbit of embedded memory, and 186 I/Os in a 256-LBGA FT-style package. The -3 speed grade supports a 0°C to 85°C commercial operating-temperature range. It combines programmable digital logic, configurable I/O, block RAM, and digital signal processing resources on one device. A field-programmable gate array is a semiconductor whose digital functionality is defined after fabrication. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, programmable interconnect, memory, and I/O resources. This makes the Spartan-6 LX device useful when a design requires hardware parallelism, reconfigurable interfaces, rapid prototyping, or later field updates without changing the printed circuit board. The XC6SLX25-3FTG256C provides 24,051 logic cells and 3,758 adaptive logic modules, giving a design substantial combinational and sequential logic capacity. Its 936 kbit of embedded memory supports buffering, packet storage, data acquisition, and general-purpose digital functions. The 186 available I/Os support external interfaces and system integration, while the -3 speed grade provides a defined performance class for industrial and commercial designs operating between 0°C and 85°C. Spartan-6 LX devices use 6-input adaptive logic modules and a programmable interconnect architecture. Depending on the implementation, designers can use the logic fabric for control, interfaces, protocol handling, and parallel processing, while block RAM provides dedicated storage resources. Configuration and programming details should be reviewed in the manufacturer Spartan-6 documentation before selecting I/O standards, clocking resources, or power-management settings. Typical applications include industrial control and automation, communication equipment, test and measurement, embedded video processing, data acquisition, and embedded systems that benefit from hardware parallelism. The combination of 24,051 logic cells, 936 kbit of embedded memory, and 186 I/Os makes the device appropriate for controllers that must combine multiple fixed-function blocks in one programmable component. The main PCB-design consideration is the 256-ball BGA footprint and its demanding escape-routing requirements. Follow the AMD Spartan-6 package pinout files, recommended PCB stack-up, and decoupling guidance when assigning power and ground balls. Validate the design for the intended -3 speed grade, I/O standards, clock topology, configuration interface, and operating-temperature range before release. This product page consolidates the exact XC6SLX25-3FTG256C configuration, pin-compatible Spartan-6 LX options, application guidance, and design considerations into an engineering-oriented reference for FPGA architecture planning and PCB implementation.

RFQ رابطہ