مصنوعات (44,000+)

XC7A35T-2FT256I - 33,280-LCell Artix-7 FPGA | AMD/Xilinx
XC7A35T-2FT256I

XC7A35T-2FT256I - 33,280-LCell Artix-7 FPGA | AMD/Xilinx

The AMD/Xilinx XC7A35T-2FT256I is an Artix-7 field-programmable gate array with 33,280 logic cells, 90 DSP slices, 1,800 Kb of block RAM, and 170 I/O in a 256-ball FTBGA package. Its -2 performance grade supports higher clock speeds than the -1 grade, while the industrial temperature designation extends operation across an extended temperature range. This FPGA combines programmable logic, DSP, block RAM, programmable I/O, and dedicated clocking resources in one device. An FPGA is a reconfigurable semiconductor whose interconnect and logic are defined by a bitstream rather than fixed circuitry. Artix-7 devices occupy the low-cost, low-power portion of the AMD/Xilinx 7-series portfolio and target compact systems requiring substantial parallel processing without the cost and power of larger high-end devices. This places the XC7A35T above a basic programmable-logic device and below larger Artix-7 members in resource capacity. The verified listing identifies 33,280 logic cells, 1,800 Kb of block RAM, 90 DSP slices, 170 I/O, and a 256-LBGA package for the closely identified XC7A35T-2FTG256I listing. Those values position the device for moderate control logic, parallel datapaths, embedded memory, video or image preprocessing, sensor fusion, and communications control. The search data does not explicitly state the target suffix's exact temperature limits, supply rails, maximum clock, or package dimensions, so those values remain marked for verification rather than being inferred. At the system level, the programmable fabric supports parallel datapaths that would require many discrete logic devices, while 90 DSP slices can accelerate multiply-accumulate operations. The 1,800 Kb block RAM provides on-chip storage for buffering, lookup tables, packet queues, and data acquisition. The 170 I/O allow interfaces to external memory, converters, transceivers, displays, and industrial peripherals, subject to the exact bank voltage, pin multiplexing, and I/O-standard constraints listed in the manufacturer documentation. The XC7A35T-2FT256I is suitable for industrial automation, test and measurement, communications infrastructure, embedded vision, and compact edge-processing systems. A board-level migration must preserve the 256-ball footprint, pin functions, supported I/O standards, power rails, configuration interface, memory interface requirements, clocking, and bitstream compatibility. Even when a distributor describes two orderable suffixes as similar, engineers should verify the exact package and temperature suffix before purchasing. A sound design starts with the AMD package pinout files and the Artix-7 documentation, followed by Vivado design constraints and timing analysis. Validate every power rail, decoupling network, configuration scheme, pin placement, and high-speed interface against the exact device suffix. Treat tool-generated timing and utilization results as design-specific measurements rather than guaranteed device specifications. This page consolidates verified source links, exposed uncertainty, pricing context, and engineering-oriented selection guidance. It adds migration and design-risk context beyond a distributor listing while avoiding unverified claims about electrical limits, lifecycle status, compliance, or package pin names.

RFQ رابطہ
XC7A35T-2FTG256C - 33,280-Cell Artix-7 FPGA | AMD
XC7A35T-2FTG256C

XC7A35T-2FTG256C - 33,280-Cell Artix-7 FPGA | AMD

The AMD XC7A35T-2FTG256C is an Artix-7 field-programmable gate array with 33,280 logic cells, 170 listed I/Os, and a 256-ball low-profile BGA package. Built on a 28 nm process, this -2 speed-grade device combines programmable logic with integrated FPGA resources for cost-sensitive embedded, communications, industrial-control, and signal-processing systems. The package is identified as FTG256, also listed as 256-LBGA by the distributor sources. An FPGA is a programmable semiconductor that lets engineers define digital logic, interfaces, control algorithms, and parallel processing functions after manufacture. The Artix-7 family combines configurable logic blocks, programmable I/O, block RAM, digital signal processing resources, and dedicated clock-management blocks on one device. This combination places the XC7A35T-2FTG256C within the FPGA and programmable-logic hierarchy rather than the fixed-function logic-IC or microprocessor categories. The verified listing identifies 33,280 logic cells and a -2 performance grade. Distributor records describe the device as an Artix-7 FPGA in a 256-LBGA package. Published Artix-7 information identifies the family as optimized for low power and cost at 28 nm. One distributor listing also highlights the family's packaging options and ease of migration between compatible family members, although pin assignments and power rails must still be checked against the specific package documents before any substitution is approved. The FTG256 package supports a compact surface-mount implementation while providing numerous programmable connections for external memory, interfaces, clocks, and control peripherals. Because the supplied web data does not include the complete pin table, bank voltage limits, differential I/O standards, or recommended high-speed layout values, those details must be taken directly from AMD's XC7A35T datasheet and package pinout files before schematic or PCB release. Typical design roles include low-cost control logic, parallel data acquisition, sensor aggregation, industrial automation, communications infrastructure, and compact embedded signal processing. The Artix-7 architecture is especially useful where a microcontroller cannot provide sufficient parallel throughput, where logic must be updated after manufacture, or where several fixed-function ICs would otherwise be combined to implement a custom datapath. A critical design practice is to treat every complete XC7A35T-2FTG256C migration as a timing, power, and pinout verification exercise. The -2 speed grade should not be replaced by a -1 grade without checking worst-case timing closure, while larger-density devices in the same package can alter embedded resources even if the footprint remains unchanged. Confirm the exact device, package, temperature grade, and bonding or migration constraints in the AMD documentation. This page consolidates the verified distributor identity, package, logic-cell count, price indication, source links, drop-in candidates, application guidance, and engineering trade-offs. The comparison material is intended to accelerate sourcing while making the remaining datasheet-dependent verification items explicit rather than presenting unsupported assumptions as specifications.

RFQ رابطہ
XC7A35T-2FTG256I - Artix-7 FPGA, 33K LC, 256-FTBGA | AMD Xilinx
XC7A35T-2FTG256I

XC7A35T-2FTG256I - Artix-7 FPGA, 33K LC, 256-FTBGA | AMD Xilinx

The AMD Xilinx XC7A35T-2FTG256I is a member of the Artix-7 family of field programmable gate arrays (FPGAs) built on a 28 nm high-k metal gate (HKMG) process technology, housed in a 256-ball fine-pitch thin BGA (FTBGA) package with -2 speed grade and industrial (-40C to +100C) temperature rating. A Field Programmable Gate Array (FPGA) is a semiconductor device whose logic functionality is defined after manufacturing through a programmable interconnect of configurable logic blocks (CLBs), block RAM, DSP slices, and programmable I/O. Within the broader programmable-logic taxonomy, an FPGA sits between fixed-function ASICs (high NRE, no flexibility) and microcontrollers (sequential execution, limited parallelism). The 7-series Xilinx FPGAs span four sub-families: Spartan-6 (cost-optimized legacy), Artix-7 (lowest power, transceiver-equipped mid-range), Kintex-7 (mid-high performance), and Virtex-7 (highest performance). Key features of the XC7A35T-2FTG256I include 33,280 logic cells distributed across approximately 5,200 6-input LUTs, 1,843,200 bits (230 KB) of block RAM organized as 50 x 36 Kb blocks, and 90 DSP48E1 slices each capable of 25 x 18-bit multiply-accumulate at up to 628 MHz. The device integrates two 10-bit ADCs (1 MSPS), four clock management tiles (CMTs) each containing one MMCM and two PLLs, and supports up to 170 user I/Os in this FTBGA-256 package. The Artix-7 architecture delivers up to 6.6 Gb/s GTP serial transceivers and a hardened memory controller block, achieving approximately 50% lower static power and 35% lower dynamic power than the prior-generation Spartan-6 at equivalent performance. The -2 speed grade positions this part as the middle performance bin (between -1 and -3) for cost-sensitive designs that still require high DSP throughput. Typical applications include high-volume motor control and digital signal processing front-ends, low-cost industrial Ethernet bridges, portable ultrasound and instrumentation front-ends, software-defined radio (SDR) baseband pre-processing, and machine-vision pre-processing pipelines. The combination of GTX transceivers, block RAM, and DSP48E1 slices makes the XC7A35T-2FTG256I well suited for parallel data-path designs with moderate serial connectivity. A key design trade-off when selecting the -2 speed grade is that the LVDS, DDR memory interface rates, and GTP transceiver line rates are constrained relative to the -3 speed grade. Designers targeting the fastest possible DDR3 or GTP line rates may need to upgrade to -3, while those optimizing for cost and still passing timing closure typically stay at -2. The industrial temperature grade extends the operating envelope beyond commercial parts, suitable for factory-floor and outdoor installations. This page aggregates distributor pricing, pin-compatible same-package alternatives, and design-oriented guidance not duplicated in the manufacturer datasheet, including thermal, signal-integrity, and pin-mux considerations for the FTBGA-256 footprint.

USD $31.17 اسٹاک میں
XC7A35T-L1CPG236I - 33,280 Logic Cell Artix-7 FPGA | AMD
XC7A35T-L1CPG236I

XC7A35T-L1CPG236I - 33,280 Logic Cell Artix-7 FPGA | AMD

The AMD XC7A35T-L1CPG236I is an Artix-7 field-programmable gate array with 33,280 logic cells, 106 I/O, and 1,843,200 embedded-memory bits, supplied in a 238-CSBGA package. Its core supply range is 0.95 V to 1.05 V, and the listed operating junction-temperature range is -40 °C to 100 °C. The device combines programmable logic, block RAM, digital signal processing resources, programmable I/O, and dedicated configuration and clocking resources in one surface-mount package. An FPGA is a semiconductor whose digital logic, memory, and I/O behavior are defined after manufacture by loading a bitstream. In the product hierarchy, an FPGA is a programmable-logic device, an integrated circuit, and a semiconductor. It differs from a fixed-function processor or ASIC because parallel hardware blocks can be configured for logic, control, data acquisition, communications, signal processing, and hardware acceleration without changing the physical silicon. The XC7A35T combines 33,280 logic cells with 106 I/O and 1,843,200 memory bits. These figures make it suitable for embedded control systems that need deterministic parallel processing, moderate on-chip data storage, and numerous external interfaces. The 238-CSBGA package also supports compact, high-density PCB layouts, although its fine ball pitch requires careful escape routing, multilayer construction, and package-aware power and ground distribution. Within the Artix-7 product family, the -35T suffix identifies the device density, while CPG236 identifies the 238-CSPBGA package family. The L1 ordering code identifies the specified low-power Artix-7 speed and power option, while the final I suffix identifies the industrial temperature option. Exact clock, power, configuration-memory, and differential-I/O details should be selected from the corresponding Artix-7 ordering guide and device datasheet for the installed design. Typical uses include industrial instrumentation, medical monitoring equipment, communications infrastructure, embedded vision, control systems, and low-power edge processing. Parallelizable algorithms benefit from the FPGA's configurable logic and DSP resources, while the 106 I/O allow multiple sensors, converters, communication transceivers, and memory interfaces to be connected without relying entirely on external serial-to-parallel converters. Design the PCB using the AMD Artix-7 package pinout files and UG475 guidance. Decoupling should follow the datasheet's power-rail requirements, configuration pins must be assigned for the intended startup method, and high-speed interfaces require controlled impedance, continuous return paths, and length matching. Confirm the exact bitstream compatibility, configuration mode, auxiliary-voltage requirements, and exposed-ball assignments before releasing the layout. This product page consolidates the exact ordering identity, package characteristics, sourcing references, pin-compatible family alternatives, and practical implementation considerations. It also distinguishes verified ordering facts from parameters that require confirmation in the device documentation, helping engineers plan sourcing, schematic review, PCB layout, and hardware bring-up without ambiguity.

RFQ رابطہ
XC7A35T-L1CSG324I - 33,280-L Cell Artix-7 FPGA | Xilinx
XC7A35T-L1CSG324I

XC7A35T-L1CSG324I - 33,280-L Cell Artix-7 FPGA | Xilinx

The Xilinx XC7A35T-L1CSG324I is an Artix-7 field-programmable gate array with 33,280 logic cells, 210 I/O, and a 1 V supply in a 324-pin CSG324 BGA package. It is built on a 28 nm process and carries the -1L low-power speed designation with an industrial temperature rating of -40°C to +100°C. An FPGA is a programmable semiconductor containing configurable logic blocks, programmable I/O, embedded memory, and digital signal processing resources. Instead of fixing a circuit in silicon, an Artix-7 device allows engineers to implement parallel datapaths, control logic, communication interfaces, and signal-processing functions that can be updated after deployment. Within the broader hierarchy, the Artix-7 family sits between general-purpose programmable logic and larger devices offering more resources and higher performance. Key resources include 33,280 logic cells, 1,843,200 bits of block RAM, and 210 user I/O in the CSG324 package. The -1L grade targets lower-power operation compared with the standard -1 grade, while the 1 V core supply reflects the 28 nm Artix-7 architecture. The CSG324 package provides a compact surface-mount option for space-constrained embedded, communications, and industrial control systems. The device architecture supports parallel logic implementation, block RAM for data buffering and packet storage, and dedicated DSP resources for filtering and arithmetic workflows. Because configuration is nonvolatile in the FPGA's dedicated configuration resources, designs can be loaded from external flash, a processor, or another configuration source. Exact resource counts for DSP slices, transceivers, and dedicated I/O blocks are not printed in the listing results and should be confirmed in the Artix-7 data sheet before final resource allocation. Typical uses include industrial control systems, embedded sensor aggregation, audio and communications preprocessing, network-interface logic, prototyping platforms, and low-cost edge-processing equipment. The 210 I/O count supports external memory, serial transceivers, converters, LEDs, switches, and high-speed digital interfaces, while the small CSG324 footprint suits boards where connector area and routing density are constrained. Design with the CSG324 package rather than a larger Artix-7 footprint, and verify the pinout, power rails, decoupling requirements, configuration pins, and exposed routing rules against the AMD package pinout files. A 324-pin BGA also demands careful escape routing, X-ray inspection, and thermal analysis during PCB qualification. This page consolidates the verified device identifiers, package details, application guidance, and drop-in Artix-7 alternatives into one engineering reference. It also highlights the speed-grade and temperature-grade checks that determine whether a substitute can preserve the original design's timing, availability, and operating requirements.

RFQ رابطہ
XC7A35T-L1CSG325I - 33280-Cell Artix-7 FPGA | AMD
XC7A35T-L1CSG325I

XC7A35T-L1CSG325I - 33280-Cell Artix-7 FPGA | AMD

The AMD XC7A35T-L1CSG325I is a 33280-logic-cell Artix-7 field-programmable gate array built on 28 nm process technology, with 150 I/O, four GTP transceivers, and a 325-pin CSG package. It operates with a 0.95 V to 1.05 V core voltage and is specified for industrial-temperature operation from -40 °C to 100 °C junction temperature. The device combines programmable logic, block RAM, DSP resources, mixed-signal blocks, and integrated high-speed transceivers in one low-power package. An FPGA is a programmable semiconductor whose interconnect and logic fabric can be configured after manufacture. Within the semiconductor hierarchy, an FPGA sits above fixed-function logic and digital signal processors, while a CPLD is a related programmable-logic category with a comparatively simpler architecture. Artix-7 devices target cost-sensitive, compact, and high-volume systems that need substantially more parallelism than discrete logic while retaining low power consumption and a manageable development flow. The Artix-7 architecture provides four GTP high-speed serial transceivers, 150 user I/O, and a logic capacity of 33280 cells. Its 28 nm implementation is intended to balance performance per watt with low static and dynamic power consumption. The -L1 ordering code identifies the low-power -1 speed grade, while the final I code identifies the industrial temperature grade and the CSG325 code identifies the 15 mm by 15 mm, 0.8 mm-pitch ball-grid-array package. The Artix-7 fabric supports clocking, programmable logic, block RAM, DSP slices, and dedicated serial transceivers, allowing one device to consolidate functions that would otherwise require multiple discrete components. Four GTP lanes can support high-speed serial links, while the programmable I/O and abundant logic cells suit parallel data acquisition, control, video, industrial automation, and communications functions. Typical applications include industrial control equipment, camera and image-processing modules, communications infrastructure, test and measurement systems, high-speed data acquisition, embedded vision, and compact embedded processing systems. The small CSG325 footprint is particularly useful where a 325-ball package is acceptable and board area is more constrained than the very smallest available Artix-7 packages. When designing a board around this FPGA, follow the AMD package pinout files and UG475 for ball assignment, power sequencing, and high-speed layout. Decoupling, configuration-data handling, transceiver supply filtering, and the exposed thermal path require careful PCB planning. This page also organizes pin-compatible Artix-7 alternatives, application guidance, and design notes that complement the manufacturer datasheet.

RFQ رابطہ
XC7A35T-L1FGG484I - Low-Power Artix-7 FPGA | AMD
XC7A35T-L1FGG484I

XC7A35T-L1FGG484I - Low-Power Artix-7 FPGA | AMD

Advanced Micro Devices XC7A35T-L1FGG484I is a low-power Artix-7 field-programmable gate array in the 484-ball FGG484 package, providing 33,280 logic cells and up to 250 user I/O. The device combines a programmable logic fabric, configurable I/O, embedded memory, and dedicated clocking resources on one integrated FPGA. Its L1 operating designation is intended for power-conscious designs, while the -1 speed grade and industrial-temperature construction suit applications requiring a balanced combination of performance, power, and environmental capability. An FPGA is a semiconductor whose digital logic, interconnections, and I/O behavior are configured after manufacture. Within the product hierarchy, the XC7A35T belongs to the Artix-7 family of FPGAs, which are programmable-logic devices under the broader semiconductor category. Rather than executing a fixed instruction set, the device implements application-specific datapaths, control logic, signal processing, and interface functions in parallel hardware. This makes an FPGA suitable when deterministic timing, parallel processing, flexible I/O, or field reconfiguration is more important than the simplicity of a fixed-function processor. The principal device figures are 33,280 logic cells, 1,843,200 block RAM bits, 250 user I/O, and a 484-BBGA package. The package provides a substantial interconnect and I/O capacity for industrial control, communications, instrumentation, embedded vision, and general-purpose prototyping systems. The exact core, auxiliary, differential, and configuration pin assignments must be taken from the Artix-7 package pinout files before PCB routing. The L1 grade differentiates this member by its low-power operating characteristics within the Artix-7 family. At VCCINT of 0.9 V, a -2L device can reduce static and dynamic power relative to operation at 1.0 V, although the specific power reduction must be evaluated against the manufacturer’s operating tables. The -1 suffix identifies the performance grade, FGG identifies the 484-ball package, and I identifies the industrial temperature option. Design tools, bitstreams, configuration requirements, and PCB constraints must be reconsidered whenever the grade, package, or device selection changes. Typical uses include industrial automation, camera and image-processing pipelines, low-latency communications, test and measurement equipment, motor-control systems, and embedded signal-processing platforms. A design should allocate pins using the manufacturer’s package files, validate high-speed interfaces against the appropriate Artix-7 datasheet tables, and program the device with the matching device identifier in the FPGA implementation toolchain. Power and signal-integrity planning are especially important in a 484-ball BGA. Place decoupling capacitors close to the relevant supply pins, route power and ground planes carefully, and keep high-speed interfaces away from noisy return paths. Verify the completed layout with the manufacturer’s Artix-7 package pinout files, design constraints, and PCB implementation guidance rather than relying on an inferred pin map.

RFQ رابطہ
XC7A35T-L1FTG256I - 28nm Artix-7 FPGA | AMD Xilinx
XC7A35T-L1FTG256I

XC7A35T-L1FTG256I - 28nm Artix-7 FPGA | AMD Xilinx

The AMD Xilinx XC7A35T-L1FTG256I is a 28 nm Artix-7 field-programmable gate array with 33,280 logic cells, 170 I/Os, MMCM and PLL resources, and a 256-pin FTBGA package. The device combines programmable logic fabric, DSP processing, and analog mixed-signal resources in a cost-optimized FPGA platform. Its listed operating voltage is 0.95 V to 1.05 V. An FPGA is a semiconductor whose digital logic, interconnect, and dedicated processing blocks are configured after manufacture. The Artix-7 family occupies the FPGA hierarchy below programmable logic devices and above fixed-function integrated circuits. By combining configurable parallel processing, high-speed serial transceivers, DSP blocks, and analog sensing resources, it supports designs that would otherwise require several discrete programmable or specialized components. The XC7A35T provides approximately 1,843,200 gates, 33,280 logic cells, and 170 user I/Os in the FTG256 package. It also supports 464 MHz operation according to the device listing. MMCM and PLL blocks provide flexible clock generation, frequency synthesis, and phase-shifted clocking for deterministic digital systems. The 28 nm process generation supports a compact balance between performance, static power, and implementation cost. This Artix-7 device is intended for programmable control, parallel data acquisition, signal processing, embedded instrumentation, communications preprocessing, and industrial automation. Its DSP blocks accelerate fixed-point operations commonly found in filters, transforms, and digital signal-processing pipelines. MMCMs and PLLs support multiple internal clock domains, while the available I/O support integration with external memory, converters, sensors, network interfaces, and industrial peripherals. The XC7A35T-L1FTG256I is especially relevant to industrial equipment requiring extended-temperature qualification and a moderate logic density. The same 256-pin package and Artix-7 architecture support controlled migration among speed-grade, temperature-grade, and device-density options when timing, power, lifecycle, and qualification requirements are reassessed. PCB implementation should follow the AMD package pinout files and UG475 guidance. Confirm the assigned FTG256 footprint, differential-pair geometry, power-plane connectivity, decoupling, configuration pins, and exposed thermal requirements against the exact device ordering code before releasing a layout. This product summary combines device identity, package and logic-resource information, relevant Artix-7 alternatives, and engineering-oriented implementation guidance. The comparison table separates package, speed-grade, temperature-grade, logic, and I/O considerations so engineers can identify technically defensible substitutions rather than relying only on nominal FPGA family names.

RFQ رابطہ
XC7A35T-L2CPG236E - 28nm Artix-7 FPGA, 106 I/O | AMD
XC7A35T-L2CPG236E

XC7A35T-L2CPG236E - 28nm Artix-7 FPGA, 106 I/O | AMD

The AMD Xilinx XC7A35T-L2CPG236E is an Artix-7 field-programmable gate array built on 28 nm technology, with 33,280 logic cells, 106 user I/O pins, and a 238-pin CSBGA package. The device is designed for compact, low-cost embedded systems requiring programmable logic, high-speed serial connectivity, and flexible I/O. Its -2 speed grade targets applications where deterministic performance and a broad operating envelope are important, while the CPG236 package provides a high-density ball-grid-array footprint for multilayer PCB designs. An FPGA is a programmable semiconductor containing configurable logic blocks, programmable interconnect, block RAM, and dedicated input/output resources. The Artix-7 family combines low power consumption and cost with the performance of a 28 nm programmable logic architecture. Within the power-management IC and FPGA hierarchy, this device acts as a reconfigurable digital platform rather than a fixed-function processor, allowing interface bridging, signal processing, control logic, and hardware acceleration to be implemented in one package. Key characteristics include 33,280 logic cells, 106 user I/O, a 0.9 V core supply, and operation from a 238-ball CSBGA package. The I/O count and package combination suit communications, industrial control, test equipment, embedded vision, and general-purpose prototyping systems. Because an FPGA pin assignment, power architecture, and bank voltage are design-specific, the complete package pinout and electrical limits must be taken from the AMD Artix-7 documentation and package pinout files. The XC7A35T family is positioned between low-cost CPLDs and larger programmable SoCs. It is appropriate when a design needs parallel logic, moderate serial connectivity, deterministic timing, or frequent design revisions without changing the PCB. The -2 grade provides a different speed qualification than -1 devices, so timing constraints, tool settings, and production qualification should be reviewed before substituting speed grades. Typical deployments include industrial automation, robotics, communications infrastructure, instrumentation, embedded control, and low-cost prototyping. The 238-CSBGA footprint requires careful ball assignment, decoupling, power planning, and signal-integrity layout. The package also requires appropriate assembly capability and thermal verification for designs operating near the device's upper temperature limits. A key design consideration is that the FPGA is only one element of the power tree. Separate VCCINT, VCCAUX, VCCO, and other supply requirements must be generated with appropriate sequencing and decoupling. Designers should also reserve configuration resources, validate every pin against the package files, and confirm that the selected bitstream, timing constraints, and board-level interfaces are supported before production release.

RFQ رابطہ
XC7A35T-L2CSG324E - 33,280-LC Artix-7 FPGA | AMD
XC7A35T-L2CSG324E

XC7A35T-L2CSG324E - 33,280-LC Artix-7 FPGA | AMD

The AMD XC7A35T-L2CSG324E is an Artix-7 field-programmable gate array built on a 28 nm process, with 33,280 logic cells, 1,800 Kb of block RAM, 90 DSP slices, and 210 I/O in a 324-CSBGA package. It is optimized for combinations of low-cost signal processing, communications, industrial automation, and custom hardware acceleration. The -2 speed designation identifies a mid-speed device within the Artix-7 family, while the extended-temperature suffix E supports operation from 0°C to 100°C junction temperature. An FPGA is a programmable digital semiconductor whose configurable logic blocks, DSP resources, memory, and I/O can be reconfigured after manufacture. Artix-7 belongs to the broader programmable-logic hierarchy: FPGA → Artix-7 → XC7A35T. The device integrates fixed hardware for parallel processing, block memory, and serial interfaces with a programmable fabric, allowing one physical design to implement control logic, data pipelines, communication interfaces, and hardware accelerators. The XC7A35T provides 33,280 logic cells for general-purpose combinational and sequential logic, 90 DSP slices for filtering, Fourier-transform, and multiply-accumulate workloads, and 1,800 Kb of block RAM for buffering frame data or storing lookup tables. Its 210 I/O pins support board-level connectivity. The 324-CSBGA package places these resources into a compact surface-mount footprint suitable for space-constrained industrial, communications, instrumentation, and embedded-processing systems. The -2 performance grade targets a balanced speed-versus-power design point rather than the fastest Artix-7 option. Because FPGA performance depends on routing, placement, clocking, memory interfaces, and the selected design, engineers should use AMD Vivado implementation results and timing analysis rather than comparing only the speed suffix. The same process applies to power, thermal, and I/O planning: board-level constraints determine whether the CSBGA device can meet the system target in its installed environment. Typical applications include industrial data acquisition, programmable signal processing, embedded communications, test and measurement, camera and image-processing pipelines, and custom accelerator boards. The 90 DSP slices make the device appropriate for parallel arithmetic, while 1,800 Kb of block RAM can buffer samples, store waveform tables, or implement local data caches. PCB implementation requires careful treatment of the dense 324-ball land pattern, power distribution, decoupling, and thermal design. Follow the Artix-7 package pinout files and UG475 when assigning balls and escape-routing high-speed interfaces. Validate every pin, voltage, bank, and configuration requirement in Vivado before releasing the layout. This product record combines the exact CSG324 configuration, Artix-7 resource details, package constraints, replacement analysis, and implementation guidance needed to plan a board or qualify a second source without relying on the generic Artix-7 family description.

RFQ رابطہ
XC7A35T-L2CSG325E - 33,280 Logic Cell Artix-7 FPGA | AMD
XC7A35T-L2CSG325E

XC7A35T-L2CSG325E - 33,280 Logic Cell Artix-7 FPGA | AMD

The AMD XC7A35T-L2CSG325E is an Artix-7 field-programmable gate array with 33,280 logic cells, 1,800 Kb of block RAM, 90 DSP slices, and 150 I/O, housed in a 325-pin CSPBGA package. The device combines a -2 speed grade with an extended-temperature rating of 0°C to 100°C at the junction. Artix-7 devices use a 28 nm CMOS process and target cost-sensitive systems requiring substantial programmable logic, parallel processing, and moderate serial connectivity. An FPGA is a semiconductor whose internal logic, memory, and I/O can be configured after manufacture. The Artix-7 family belongs to the broader FPGA and programmable-logic hierarchy, combining configurable logic blocks with block RAM, digital signal processors, programmable I/O, clocking resources, and high-speed serial transceivers. This makes the XC7A35T suitable for embedded systems that need hardware-level parallelism, adaptable interfaces, or field-updatable control logic. The XC7A35T provides 33,280 logic cells and 90 DSP slices for parallel algorithms and fixed-function acceleration. Its 1,800 Kb of block RAM supports data buffering, packet processing, frame storage, and general-purpose embedded memories. The device exposes 150 I/O, enabling dense mixed-signal and digital interfaces while preserving the integration benefits of a single programmable device. Its -2 performance grade provides a defined speed position within the Artix-7 portfolio. The 28 nm CMOS implementation balances programmable performance and static power against the cost and complexity of larger FPGA processes. The 1,800 Kb block-RAM capacity enables time-domain multiplexing of data paths, while 90 DSP slices can accelerate filters, transforms, and fixed-point arithmetic without relying on discrete accelerators. Exact timing, power, transceiver, and resource limits must be established from the Artix-7 family datasheet and the selected design’s timing constraints. Typical uses include industrial automation and control, communications infrastructure, instrumentation, embedded vision, test and measurement, and high-performance embedded processing. The integrated DSP slices and block RAM are especially useful for digital filtering, signal conditioning, protocol termination, and real-time control. The 150-I/O device can consolidate several discrete logic, memory, and interface components into one package when board space and updateability are priorities. Design planning should begin with the device pinout and Artix-7 package files, followed by power, clock, configuration, and differential-signal integrity reviews. Designers should verify every selected pin against the exact CSG325 package, preserve the required power-supply sequencing, and include the recommended external components for configuration and clocking. Migration between speed grades or temperature options should be checked against the production temperature range and the worst-case timing corner. This page combines the Artix-7 device capabilities, package information, practical design guidance, and same-family migration options into one engineering-focused reference. It also distinguishes exact drop-in package alternatives from options that require a different footprint, helping designers make a safer PCB and timing decision.

RFQ رابطہ
XC7A35T-L2FGG484E - 33,280-Cell Artix-7 FPGA | AMD
XC7A35T-L2FGG484E

XC7A35T-L2FGG484E - 33,280-Cell Artix-7 FPGA | AMD

The AMD XC7A35T-L2FGG484E is an Artix-7 field-programmable gate array with 33,280 programmable logic cells, 250 I/O sites, and a 484-ball ball-grid-array package. It is manufactured on a 28 nm process and provides 1.2 V to 3.3 V I/O support, a 0.9 V core supply, 16 transceiver lanes, and an approximately 5.9 W thermal design power target for industrial-temperature operation. The device is identified by the L2 speed grade, FGG484 package code, and E extended-industrial temperature option. An FPGA is a semiconductor whose digital logic, routing, and I/O behavior are configured after manufacture. The XC7A35T belongs to the Artix-7 hierarchy, where 7-series fabric, programmable logic, block RAM, DSP resources, and high-speed I/O support parallel processing, control, data acquisition, communications, and embedded systems. Unlike a fixed-function microcontroller, an Artix-7 FPGA can implement multiple hardware functions concurrently while retaining reprogrammability and field-updatable logic. The XC7A35T-L2FGG484E combines a 28 nm silicon implementation with 33,280 logic cells and 250 available I/O sites. Its 1.2 V to 3.3 V I/O range permits interfaces with common industrial and embedded logic levels, while the approximately 850 ps performance figure supports timing-sensitive pipelines and control logic. Sixteen transceiver lanes add useful connectivity for high-speed parallel interfaces, although protocol-specific line rates and signal-integrity limits require validation against the relevant AMD 7-series documentation. The FGG484 package offers 484 ball-grid-array contacts on a 1 mm-class pitch and requires deliberate power, ground, decoupling, and high-speed routing discipline. The L2 speed grade should be evaluated against the required clock rate and timing margin rather than treated as a substitute for a complete Vivado timing report. The E suffix denotes the extended-industrial temperature option for this ordering code, while the exact limits and grade definitions should be confirmed in the manufacturer device documentation. Typical applications include industrial data acquisition, machine vision, test and measurement, networked control, embedded signal processing, and low-cost communications infrastructure. The 250 I/O count is especially useful for parallel sensor interfaces, custom bus controllers, timing and trigger distribution, and designs that combine logic resources with high-speed transceivers. The 28 nm Artix-7 process also positions the device for designs requiring more parallelism than small general-purpose microcontrollers can provide. PCB design should allocate separate supply rails for core and I/O, place high-frequency decoupling close to the BGA power balls, and provide a power plane capable of handling the approximately 5.9 W device-power target. A 484-BBGA assembly also demands careful escape routing and package-aware bitstream constraints. Use the AMD Artix-7 package pinout files and UG475 when assigning every power, ground, configuration, clock, and user I/O ball. This page combines the exact device identity, package and resource data, same-footprint migration options, practical power and layout guidance, and structured comparisons. These engineering details help distinguish a true FGG484 migration from a merely similar Artix-7 device before a design reaches schematic capture, placement, or production release.

RFQ رابطہ
XC7A50T-1CS324I - 52,160 Logic Cell Artix-7 FPGA | AMD
XC7A50T-1CS324I

XC7A50T-1CS324I - 52,160 Logic Cell Artix-7 FPGA | AMD

The AMD XC7A50T-1CS324I is an Artix-7 field-programmable gate array with 52,160 programmable logic cells, 210 programmable I/O pins and 2,764,800 RAM bits, supplied in a 324-CSPBGA package. It is built on a 28 nm FPGA process and uses a 0.95 V to 1.05 V core supply. The part is intended for industrial-temperature designs requiring programmable logic, parallel processing, serial connectivity, control, and adaptable hardware integration. An FPGA is a semiconductor whose digital function is defined by loading a configuration bitstream after fabrication. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed during development, revision, or field updates. Artix-7 devices combine programmable logic, configurable I/O, block RAM, digital signal-processing resources, clocking, and memory interfaces in one integrated device. The XC7A50T-1CS324I provides 4,075 configurable logic blocks according to the supplied product data. Its 52,160 logic elements, 2,764,800 RAM bits, and 210 programmable I/O pins make it suitable for embedded control, industrial automation, communications, instrumentation, data acquisition, interface aggregation, and compact custom signal-processing systems. The CSPBGA package supports high-density PCB integration but requires careful escape routing and package-aware layout. The suffix identifies the speed grade, package, and temperature qualification of the selected orderable device. The verified manufacturer-linked data describes a 0.95 V to 1.05 V supply range and an industrial junction-temperature range of -40°C to 100°C. Designers should therefore verify the complete electrical, timing, pinout, power, and configuration requirements against the applicable AMD Artix-7 documentation before schematic capture. Typical design work involves assigning clocking and configuration pins, planning bank-specific supply rails, decoupling the package power balls, routing high-speed interfaces with controlled impedance, and validating the selected configuration bitstream on the finished board. Because FPGA designs depend on device, package, speed grade, and tool settings, a board should not be treated as interchangeable with another FPGA merely because its logic-cell count is similar. This product page consolidates verified source links and package-oriented engineering guidance, while separating unavailable pricing, pin mapping, and detailed timing data instead of estimating them. It supports sourcing and initial design planning for engineers who need an AMD Artix-7 device with 52,160 logic elements, 210 I/O pins, and a 324-CSPBGA package.

RFQ رابطہ
XC7A50T-1CSG324I - Artix-7 FPGA, 52K Logic Cells | AMD
XC7A50T-1CSG324I

XC7A50T-1CSG324I - Artix-7 FPGA, 52K Logic Cells | AMD

The AMD XC7A50T-1CSG324I is an Artix-7 Field Programmable Gate Array (FPGA) from the 7 series family, designed for cost-sensitive, high-volume applications requiring low power and high I/O density. It features 52,160 logic cells, 2,764,800 bits of total block RAM, and 210 user I/Os, all housed in a compact 15x15mm 324-pin CSPBGA package. This industrial-grade variant operates over the -40°C to +100°C temperature range. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks and reconfigurable interconnects, allowing them to implement any digital logic function. FPGAs sit within the broader hierarchy of programmable logic devices (PLDs), which are themselves a subset of integrated circuits. This flexibility makes FPGAs ideal for prototyping, low-to-mid volume production, and applications requiring field upgrades. Key features of the XC7A50T-1CSG324I include 52,160 logic cells, 2,764,800 bits of block RAM, 120 DSP slices, and 5 clock management tiles (CMTs) each containing a mixed-mode clock manager (MMCM) and a phase-locked loop (PLL). The device supports a wide range of I/O standards including LVCMOS, LVDS, and HSTL, and features high-speed serial transceivers for gigabit connectivity. The 28nm process technology balances performance with power efficiency. Architecturally, the Artix-7 family is built on AMD's 28nm high-performance, low-power (HPL) process. The device integrates hardened memory controllers, supporting DDR3 and DDR3L, and includes dedicated blocks for PCIe and Ethernet. The configurable logic blocks (CLBs) contain look-up tables (LUTs) and flip-flops, while the DSP48E1 slices enable high-speed arithmetic operations. The device is programmed via SRAM-based configuration, requiring an external configuration source such as a flash memory or a microprocessor. Typical applications include industrial motor control, medical imaging, software-defined radio, and video processing. The 210 user I/Os and 324-pin package make it suitable for board designs where space is at a premium. The industrial temperature grade ensures reliable operation in harsh environments. When designing with this FPGA, careful attention must be paid to power supply decoupling and configuration bitstream storage. The device requires multiple supply rails (VCCINT, VCCAUX, VCCO) and a configuration source. Proper PCB layout, including impedance-controlled traces for high-speed signals, is essential for reliable operation.

RFQ رابطہ
XC7A50T-1FG484C - 52K Artix-7 FPGA | AMD | Industrial Control
XC7A50T-1FG484C

XC7A50T-1FG484C - 52K Artix-7 FPGA | AMD | Industrial Control

The AMD XC7A50T-1FG484C is an Artix-7 field-programmable gate array with 52,000 logic cells, 250 I/Os, and a 484-FBGA package, intended for programmable logic, control, interface, and signal-processing designs. The verified listing identifies the device as a 484-BBGA Artix-7 FPGA with 2,764,800 internal configuration bits and 52,160 logic elements. What is an FPGA? A field-programmable gate array is a programmable digital semiconductor that combines configurable logic blocks, programmable interconnect, block RAM, and digital signal processing resources. An Artix-7 FPGA sits within the FPGA hierarchy: FPGA → Artix-7 → Xilinx 7-Series FPGA → programmable logic and embedded-processing platform. Unlike a fixed-function application-specific integrated circuit, an FPGA lets engineers define parallel hardware behavior through HDL, constraints, and device configuration. The XC7A50T family is positioned for cost-sensitive systems that need more parallelism and I/O flexibility than a microcontroller or fixed interface device can provide. The verified distributor information specifically lists 250 I/Os and a 484-BBGA package, making the device relevant to industrial automation, data acquisition, communications, embedded control, and image or video processing systems. The 484-ball package supports dense board routing while providing a substantial external interface count. The -1 speed designation, temperature suffix, and exact electrical limits are not fully specified in the supplied search excerpts. Consequently, operating temperature, I/O standards, core voltage, memory resources, clock-management resources, and power consumption must be confirmed against the AMD Artix-7 data sheet before schematic sign-off. Do not infer those specifications from the distributor title alone. A practical design begins by partitioning the required datapath into parallel pipelines and selecting the smallest Artix-7 resource that satisfies timing, memory, DSP, and I/O constraints. The 250-I/O figure should be mapped against the board-level connector, transceiver, voltage-standard, and clock requirements. Pin assignment, bank voltage planning, configuration pins, decoupling, and power sequencing are more important than treating the FPGA as a generic high-pin-count component. This page consolidates verified distributor identity and package information, separates known facts from missing technical data, and avoids fabricating alternatives or electrical ratings. Engineers should use the official AMD package files and datasheet for final pinout, timing, power, and migration decisions.

RFQ رابطہ
XC7A50T-1FG484I - Artix-7 FPGA, 52,160 Cells | AMD
XC7A50T-1FG484I

XC7A50T-1FG484I - Artix-7 FPGA, 52,160 Cells | AMD

AMD XC7A50T-1FG484I is an Artix-7 field-programmable gate array (FPGA) with 52,160 programmable logic cells, supplied in a 484-BBGA package. The -1 speed grade, -F package designation, and I industrial-temperature suffix identify the ordering variant, while the device provides a 1 V core-related operating point and 28 nm CMOS technology according to the supplied comparison data. The 484-BBGA package provides a high-density ball-grid interface for designs requiring extensive programmable I/O and logic integration. What is an FPGA? A field-programmable gate array is a reconfigurable digital semiconductor in the programmable-logic and FPGA category. Instead of fixing the logic at fabrication, engineers configure an FPGA after manufacture using HDL synthesis, place-and-route tools, and a device bitstream. Within the hardware hierarchy, the XC7A50T belongs to the Artix-7 FPGA family and provides a programmable-logic platform for control, signal processing, communications, and embedded-system logic. The supplied AMD-related search data identifies the device as an Artix-7 FPGA with 52,160 logic cells in a 484-BBGA package. The available comparison data also states 28 nm CMOS technology and a 1 V operating value for the target MPN. The -1 ordering code is commonly used to identify the speed grade, but the supplied data does not provide a complete timing table, I/O standards, block-resource counts, pinout, or absolute maximum ratings. Those parameters must therefore be confirmed against the manufacturer documentation before release. The 484-BBGA package is suited to compact, high-pin-count boards where a large number of package balls are required. Unlike a cross-package replacement, any proposed alternative must use the same package footprint and preserve the relevant ball assignments, voltage requirements, configuration interface, and design-tool compatibility. The supplied cross-reference results identify same-family 484-pin candidates, but they do not provide enough verified detail to establish five unqualified production drop-in replacements. Typical engineering uses include industrial automation, embedded control, sensor and signal-processing front ends, communications infrastructure, and general-purpose digital prototyping. The device should be paired with a validated power architecture, decoupling strategy, clocking plan, configuration memory or boot source, and AMD FPGA implementation flow. Because the provided evidence does not contain the complete pinout or timing specifications, PCB and firmware decisions should not be based on search-result snippets alone. For a new design, the target MPN is best suited when its documented resources, speed grade, temperature range, and package assignments match the design. For an existing PCB, compare the exact package suffix, ball map, core voltage, I/O voltage, configuration pins, memory interfaces, and required IP before considering a replacement. The official AMD Artix-7 package-pinout resources are the authoritative starting point for these checks. This page consolidates the verified search results, package identity, sourcing links, and design cautions for XC7A50T-1FG484I. It also separates documented values from missing engineering data rather than presenting inferred specifications as facts.

RFQ رابطہ
XC7A50T-1FGG484I - 52,160 Logic Cell Artix-7 FPGA | AMD
XC7A50T-1FGG484I

XC7A50T-1FGG484I - 52,160 Logic Cell Artix-7 FPGA | AMD

The AMD XC7A50T-1FGG484I is an Artix-7 field-programmable gate array with 52,160 logic cells, 250 user I/Os, four GTP transceivers, and a -1 speed grade, housed in a 484-ball fine-pitch BGA package measuring 23 mm × 23 mm. Its industrial temperature designation supports operation from -40 °C to +100 °C junction temperature. A field-programmable gate array is a semiconductor whose logic, interconnect, and configurable I/O blocks are programmed after manufacture. The XC7A50T belongs to the Artix-7 FPGA family, combining programmable logic, DSP resources, block RAM, programmable I/O, and high-speed serial transceivers in one device. Its position in the hierarchy is FPGA → Artix-7 FPGA → 7-Series FPGA → programmable semiconductor. The principal features of the XC7A50T-1FGG484I include 52,160 logic cells, 250 user I/Os, and four GTP transceivers. The -1 ordering code identifies the device’s speed grade, while the FGG484 designation identifies the 484-ball package family. Its 250 I/Os provide extensive connectivity for parallel buses, control signals, industrial interfaces, and external memory. Four GTP transceivers extend the design capability into applications requiring high-speed serial links. The device also provides 134,600 bits of block RAM and 215 DSP slices, allowing parallel logic, DSP processing, and buffered storage to share one implementation platform. These resources make the FPGA useful for real-time control, signal acquisition, sensor processing, industrial automation, communications, and embedded video functions. A 100 MHz configuration clock is specified for the target device, supporting common parallel configuration architectures. Typical applications include industrial PLC and factory-control logic, sensor-fusion and real-time acquisition systems, camera and image-processing pipelines, low-cost serial-interface bridges, and embedded communications equipment. In each case, designers use the Artix-7 balance of programmable logic resources, I/O density, DSP capability, and four GTP transceivers to consolidate functions that would otherwise require several discrete devices. PCB implementation requires careful attention to the 484-ball fine-pitch BGA escape routing, power delivery, decoupling, and high-speed transceiver layout. Consult the manufacturer’s Artix-7 package pinout files and package-specific PCB guidance when assigning balls and planning layer transitions. Configuration storage, clocking, decoupling, and unused-pin treatment must be implemented according to the device documentation. This product page combines the exact device identity, architecture-level parameters, same-package migration options, pricing context, and engineering design guidance to support faster FPGA selection and PCB planning. It also distinguishes speed-grade, temperature-grade, and density changes that can be important when determining replacement suitability.

RFQ رابطہ
XC7A50T-2CS325I - Artix-7 FPGA, 324-LFBGA | AMD
XC7A50T-2CS325I

XC7A50T-2CS325I - Artix-7 FPGA, 324-LFBGA | AMD

The AMD XC7A50T-2CS325I is an Artix-7 field-programmable gate array (FPGA) in a 324-LFBGA package, with 150 I/O and the industrial -2 speed grade indicated by the ordering code. The verified distributor listing identifies the device as a programmable FPGA and provides the family-level package information, while the Artix-7 data sheet is the authoritative source for electrical, timing, configuration, and environmental details. The package designation CSG325 is used for this 324-LFBGA configuration, and the final G suffix in related AMD/Xilinx catalog listings indicates the same package family notation used by the source data. An FPGA is a programmable digital semiconductor used to implement logic, control, signal-processing, communications, and embedded-system functions in a single integrated device. Xilinx 7 Series FPGAs combine configurable logic blocks, block RAM, digital signal-processing resources, programmable I/O, clock-management resources, and dedicated configuration mechanisms. Artix-7 devices are positioned for low-cost, low-power, and small-form-factor designs, making the XC7A50T useful for industrial control, communications, instrumentation, embedded vision, and compact embedded platforms. The verified data identifies the XC7A50T family and its Artix-7 architecture but does not provide complete electrical tables, timing grades, resource counts, maximum I/O standards, power values, or package dimensions. Those parameters remain marked as needed rather than inferred. The -2 suffix, I suffix, package, and 150-I/O listing are retained exactly as supplied. Engineers should use the AMD Artix-7 data sheet and package pinout files for final timing, electrical, thermal, and land-pattern decisions. The target is suitable when a design needs a moderately capable programmable logic platform and can be implemented in the CSG325 package. Its industrial ordering suffix should be checked against the system environmental requirements. Configuration memory, programming tools, clock sources, I/O voltage domains, and decoupling must be designed around the relevant Artix-7 power architecture rather than inferred from a distributor summary. Unlike a fixed-function ASIC, an FPGA allows logic revisions, parallel interface adaptation, and field-programmable product differentiation. Unlike a microcontroller-only design, it can place multiple deterministic datapaths and control functions beside one another, provided timing closure and resource utilization are verified. This makes XC7A50T-2CS325I relevant to custom controllers, protocol bridges, test systems, and industrial equipment where firmware flexibility and hardware parallelism are both valuable. When selecting or replacing this FPGA, verify the exact package pinout, supported I/O standards, configuration mode, speed grade, temperature grade, supply requirements, and tool compatibility using AMD documentation. The -2CS325I and -2CSG325I ordering strings are related catalog spellings, but a substitution must not be approved from the package name alone. This page combines verified distributor identity, source URLs, application context, and explicit data gaps rather than presenting undocumented specifications as facts.

RFQ رابطہ
XC7A50T-2CSG324I - Artix-7 FPGA, 52K Logic Cells | AMD
XC7A50T-2CSG324I

XC7A50T-2CSG324I - Artix-7 FPGA, 52K Logic Cells | AMD

The AMD XC7A50T-2CSG324I is a member of the Artix-7 FPGA family, built on a 28nm process technology. It features 52,160 logic cells, 2,764,800 block RAM bits, and 210 user I/O pins, all housed in a 324-ball CSG (CSPBGA) package. This device operates with a core voltage (VCCINT) of 1.0V and is specified for the industrial temperature range (-40°C to +100°C). An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the designer after manufacturing, allowing for custom digital logic implementations. FPGAs sit between ASICs (application-specific) and microprocessors (software-programmable) in the design spectrum, offering hardware-level parallelism and reconfigurability. The Artix-7 family is optimized for low power and cost at 28nm, targeting applications that require high performance per watt without the expense of high-end FPGAs. Key features of the XC7A50T-2CSG324I include 120 DSP48E1 slices for signal processing, 5 clock management tiles (CMTs) with MMCM and PLL, and support for various I/O standards including LVCMOS, LVDS, and HSTL. The -2 speed grade provides a balance of performance and power, with the device supporting configuration via JTAG, SPI, or BPI interfaces. The CSG324 package offers a compact footprint with 324 balls on a 0.8mm pitch, enabling dense PCB layouts. Architecturally, the Artix-7 fabric uses a 6-input look-up table (LUT) architecture with dedicated carry chains, making it efficient for both control logic and datapath designs. The integrated block RAM can be configured in various aspect ratios, and the DSP48E1 slices support multiply-accumulate operations essential for digital signal processing. The device also includes analog-to-digital converter (XADC) functionality for on-chip temperature and voltage monitoring. Typical applications include software-defined radio, motor control, industrial networking, and medical imaging. The combination of low power, moderate logic density, and transceiver-less design makes it suitable for cost-sensitive, high-volume applications where high-speed serial links are not required. When designing with this FPGA, careful attention must be paid to power supply decoupling on VCCINT, VCCBRAM, and VCCO rails, as well as proper configuration pin termination. The device supports partial reconfiguration, enabling dynamic updates to logic functions in the field.

USD $25.45 رابطہ
XC7A50T-2CSG325I - Artix-7 FPGA 150 I/O | AMD
XC7A50T-2CSG325I

XC7A50T-2CSG325I - Artix-7 FPGA 150 I/O | AMD

The AMD XC7A50T-2CSG325I is a member of the Artix-7 FPGA family, designed for cost-sensitive, high-volume applications requiring low power and high performance at 28nm. It features 52,160 logic cells, 150 user I/Os, and 2,764,800 bits of block RAM, all housed in a 324-ball CSBGA package. This device operates from a 1V core supply and supports industrial temperature ranges, making it suitable for a wide range of embedded and communications systems. An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks and a hierarchy of reconfigurable interconnects that allow the same chip to implement different digital logic functions. FPGAs sit between microcontrollers and ASICs in the design spectrum, offering the flexibility of software with the parallelism of hardware. They are essential in applications where rapid prototyping, hardware acceleration, or in-field updates are required. Key features of the XC7A50T-2CSG325I include 150 user I/Os, 52,160 logic cells, and 2,764,800 bits of block RAM. The device also integrates an XADC block with an on-chip reference circuit (±1%), enabling on-chip monitoring of temperature and power supply rails without external active components. The -2 speed grade provides a balanced performance point for logic and I/O, while the industrial temperature grade (-I) ensures operation from -40°C to +100°C. Technically, the Artix-7 family is built on a 28nm high-k metal gate (HKMG) process, delivering the lowest power and cost at this node. The device supports various I/O standards, including LVCMOS, LVDS, and HSTL, and includes clock management tiles (CMTs) with MMCM and PLL blocks for robust clock generation. The XADC provides a 12-bit, 1 MSPS analog-to-digital converter, useful for system monitoring and control. Typical applications include motor control, industrial networking, software-defined radio, and video processing. The 150 I/Os and 324-ball package make it ideal for mid-density designs where board space is limited. The low power consumption of the Artix-7 family is particularly beneficial in battery-powered or thermally constrained systems. When designing with this device, ensure proper decoupling of the 1V core supply and follow AMD's power-on sequencing guidelines. The configuration bitstream can be stored in external SPI flash or loaded via JTAG, providing flexibility in system design.

RFQ رابطہ
XC7A50T-2FG484I - 52,160-L Logic Artix-7 FPGA | AMD
XC7A50T-2FG484I

XC7A50T-2FG484I - 52,160-L Logic Artix-7 FPGA | AMD

The AMD XC7A50T-2FG484I is an Artix-7 field-programmable gate array (FPGA) with 52,160 logic elements, 250 I/O, and a 484-pin FBGA package. The supplied distributor data identifies the device as a 28 nm CMOS FPGA with a 1 V supply and 2,764,800 logic cells in the associated listing field; the exact interpretation of that field should be confirmed against the manufacturer datasheet. A field-programmable gate array is a programmable-logic semiconductor: configurable logic blocks, digital signal processing resources, block RAM, and programmable I/O are combined on one integrated circuit. An FPGA sits within the broader semiconductor and programmable-logic hierarchy, allowing parallel hardware functions to be implemented and revised without changing the PCB. This makes the Artix-7 family suitable for control, signal processing, communications, and embedded systems where parallel throughput and reconfigurability matter. The XC7A50T-2FG484I combines 52,160 logic elements with 2.64 Mbit embedded memory in the supplied comparison data. Its 484-pin FBGA package provides extensive board connectivity for high-speed interfaces and external memory. The “-2” speed designation and “I” temperature suffix are family ordering codes, but the verified excerpt does not provide complete timing, temperature, or power values; those parameters should be checked in the AMD datasheet before design release. The device is appropriate for industrial automation, robotics, embedded control, communications, instrumentation, and signal-processing designs. Its large I/O count is useful when a design combines multiple parallel buses, high-speed transceivers, DDR memory, clocks, and management signals. Compared with smaller FPGAs, the XC7A50T provides more parallel resources, but its 484-BBGA package requires careful PCB escape routing, thermal planning, and manufacturing control. A key design consideration is package complexity: the dense FBGA footprint demands via-in-pad or via-under-bump considerations, precise ball assignment, and validated manufacturing rules. Power, decoupling, clocking, configuration, and high-speed signal-integrity requirements also depend on the selected board stack-up and the exact I/O standards enabled. This page consolidates verified distributor specifications, package information, source links, and engineering-oriented selection guidance. It distinguishes confirmed values from parameters that require the manufacturer datasheet, avoiding invented electrical or lifecycle claims.

RFQ رابطہ
XC7A50T-2FGG484C - 52,160-LC Artix-7 FPGA | AMD | Industrial Control
XC7A50T-2FGG484C

XC7A50T-2FGG484C - 52,160-LC Artix-7 FPGA | AMD | Industrial Control

AMD XC7A50T-2FGG484C is an Artix-7 field-programmable gate array with 52,160 logic cells, 276,480 flip-flops, and 250 I/O in an FGG484 484-ball BGA package. The -2 speed grade targets commercial-temperature applications, while the C suffix identifies the commercial grade. Its fabric combines programmable logic, block RAM, DSP resources, MMCMs, and PLLs in one device. A field-programmable gate array is a semiconductor whose digital logic, memory, signal processing, and I/O functions are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, alongside CPLDs and application-specific programmable arrays. Within the Xilinx 7-series architecture, Artix-7 devices balance logic capacity, low-cost integration, and migration options for cost-sensitive embedded systems. The XC7A50T device provides 250 I/O and 52,160 logic cells according to the AMD product listing. Its 276,480 flip-flops support parallel state, control, datapath, and interface logic. The FGG484 package provides 484 solder balls and supports migration within the Artix-7 family when the selected device, speed grade, temperature grade, configuration data, and external interfaces are compatible. Integrated MMCM and PLL resources support clock generation and phase management. The FGG484 option combines a 484-ball package with 250 usable I/O for designs requiring substantial external connectivity. Programmable I/O can accommodate digital control buses, parallel data interfaces, memory interfaces, and external transceiver connections. Its block RAM and DSP resources allow data acquisition, filtering, waveform generation, and control functions to be consolidated, although the exact count and timing limits of each resource must be checked in the manufacturer documentation before design closure. Typical Artix-7 applications include industrial control, factory automation, embedded instrumentation, data acquisition, communications equipment, and compact edge-processing systems. The XC7A50T-2FGG484C is especially relevant when a design needs more logic than smaller Artix-7 devices provide while retaining the cost and power advantages associated with the Artix-7 family rather than moving to a larger device family. The principal design consideration is package migration. Although related XC7A15T, XC7A35T, XC7A50T, and XC7A100T devices can use compatible Artix-7 package arrangements, a replacement is not automatically equivalent because device density, utilized I/O, configuration memories, clocks, and the speed or temperature suffix may change. Validate the complete clock, power, pin, timing, and bitstream requirements before substituting a part. This product summary combines the manufacturer-style device identity, package information, search queries, and AMD migration information with engineering guidance focused on footprint compatibility, configuration, clocking, and resource planning. It also identifies the limitations that matter when evaluating a production replacement rather than treating every same-package FPGA as an automatic substitute.

RFQ رابطہ
XC7A50T-2FGG484I - Artix-7 FPGA, 250 I/O | AMD
XC7A50T-2FGG484I

XC7A50T-2FGG484I - Artix-7 FPGA, 250 I/O | AMD

The AMD XC7A50T-2FGG484I is an Artix-7 Field Programmable Gate Array (FPGA) from the cost-optimized 28nm family, offering 52,160 logic cells, 250 user I/Os, and 2,764,800 bits of block RAM in a 484-ball FBGA (FGG484) package. It operates from a 0.95V to 1.05V core supply and supports industrial temperature range (-40°C to +100°C). An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement arbitrary digital logic functions. FPGAs sit within the broader category of programmable logic devices (PLDs), which are themselves a subset of application-specific integrated circuits (ASICs) but with the key advantage of reconfigurability. The Artix-7 family is positioned as the low-cost, high-performance-per-watt tier within the Xilinx 7-series, balancing logic density, DSP capability, and transceiver performance for cost-sensitive applications. Key features include 150 DSP48E1 slices for high-speed signal processing, 5 clock management tiles (CMTs) with MMCM and PLL, and support for multiple I/O standards including LVCMOS, LVDS, and HSTL. The device integrates analog mixed-signal (AMS) blocks for on-chip voltage and temperature monitoring. The FGG484 package provides a 23x23mm footprint with 1.0mm ball pitch, enabling moderate-density PCB designs without requiring advanced manufacturing processes. Architecturally, the Artix-7 fabric is built on a 28nm high-k metal gate (HKMG) process, delivering up to 2.9 Tb/s of aggregate I/O bandwidth. The configurable logic blocks (CLBs) contain 8 6-input LUTs and 16 flip-flops each, providing flexible logic implementation. The block RAM is organized as 36Kb dual-port blocks that can be cascaded or split into two independent 18Kb blocks, supporting various memory configurations. Typical applications include motor control, industrial networking, software-defined radio, medical imaging, and low-cost video processing. The 250 I/Os and 150 DSP slices make it well-suited for real-time signal processing and interface bridging. The industrial temperature grade ensures reliable operation in harsh environments. When designing with this device, ensure adequate decoupling on all power rails (VCCINT, VCCAUX, VCCO) and follow AMD's power-on sequencing requirements. The configuration bitstream can be stored in external SPI flash or loaded via JTAG, with support for multi-boot and fallback configurations.

RFQ رابطہ
XC7A50T-2FT256I - 52,160 Logic Cell Artix-7 FPGA | AMD
XC7A50T-2FT256I

XC7A50T-2FT256I - 52,160 Logic Cell Artix-7 FPGA | AMD

The AMD Xilinx XC7A50T-2FT256I is an Artix-7 field-programmable gate array (FPGA) with 52,160 logic elements, 170 user I/O, and 2,764,800 total RAM bits in a 256-FTBGA package. It is designed for cost-sensitive, high-volume embedded systems requiring programmable logic, parallel interfaces, control, and signal processing. The verified distributor listing identifies it as a 256-LBGA FPGA, while the package nomenclature uses 256-FTBGA. An FPGA is a programmable semiconductor containing configurable logic blocks, programmable interconnect, block RAM, and input/output resources. Unlike a fixed-function application-specific integrated circuit, an FPGA permits logic changes through a programmable configuration while retaining the same board-level package and pin assignment. The Artix-7 family positions the XC7A50T between larger programmable-logic devices and lower-capacity FPGA options. The XC7A50T-2FT256I provides 52,160 logic elements, 4,075 logic array blocks according to the verified product description, 2,764,800 RAM bits, and 170 user I/O. These resources support control logic, data acquisition, protocol bridging, industrial automation, embedded vision, communications, and general-purpose accelerator designs. The exact speed grade, temperature grade, and complete timing specifications are identified by the part-number suffix and must be checked against the AMD Artix-7 datasheet. The 256-FTBGA package is a surface-mount ball-grid-array package intended for multilayer PCB designs. Because the device has many power, ground, configuration, and user-I/O balls, board layout, decoupling, thermal management, and high-speed routing are critical. AMD also provides package pinout files in TXT and CSV formats, with the format described by UG475. Typical implementations use XC7A50T-2FT256I in industrial controllers, camera and image-processing front ends, communication gateways, sensor fusion, test equipment, and embedded compute systems. Designers should use the package pinout file and device-specific constraints to validate every ball assignment, power rail, configuration interface, and I/O standard before fabrication. This page consolidates verified distributor references, package information, design constraints, and practical procurement guidance. It does not invent timing, electrical, lifecycle, or compliance values that were not present in the supplied data.

RFQ رابطہ