مصنوعات (39,000+)

EPM9560RI304 - MAX 9000 CPLD 560 Macrocell 304-Pin RQFP | Altera
EPM9560RI304

EPM9560RI304 - MAX 9000 CPLD 560 Macrocell 304-Pin RQFP | Altera

The Altera EPM9560RI304 is a MAX 9000 family Complex Programmable Logic Device (CPLD) offering 560 macrocells with a 20 ns pin-to-pin propagation delay, housed in a 304-pin BFQFP/RQFP package. It is a 5.0 V EEPROM-based programmable logic device built on third-generation Multiple Array MatriX (MAX) architecture with in-system programmability (ISP) through a built-in IEEE Std. 1149.1 JTAG interface. A CPLD (Complex Programmable Logic Device) is a programmable logic IC that combines the flexibility of a field-programmable gate array with the non-volatile, instant-on characteristics of a PAL/GAL. CPLDs sit between simple programmable logic devices and FPGAs in the programmable logic hierarchy: PLD -> CPLD -> FPGA -> programmable logic semiconductor. The MAX 9000 family uses EEPROM configuration cells, so the device retains its configuration without an external boot PROM and is operational immediately after power-up. The EPM9560RI304 provides 560 macrocells, 12,000 usable gates, and 216 maximum user I/O pins, making it suitable for glue logic consolidation, bus interface bridging, and state-machine implementations that exceed the capacity of smaller MAX 7000 devices. The 20 ns propagation delay supports system clock rates in the 50 MHz class for combinatorial paths, while the 304-pin RQFP package provides the I/O count needed for wide bus interfaces. The MAX 9000 architecture is based on Logic Array Blocks (LABs) interconnected by a fast Programmable Interconnect Array (PIA), delivering deterministic, predictable timing without the place-and-route timing closure iterations typical of SRAM-based FPGAs. The 5.0 V core and I/O simplify interfacing to legacy 5 V TTL/CMOS logic, which is a key advantage in industrial and telecom equipment retrofits. Typical applications include industrial control backplanes, telecom line-card glue logic, legacy system maintenance, test equipment, and military/aerospace programs where 5 V logic and non-volatile configuration are mandatory. The industrial temperature grade (-40C to +85C) supports deployment in factory-floor and outdoor equipment. When designing with the EPM9560RI304, note that the device is configured via the JTAG interface and requires a 5.0 V supply with careful decoupling on every VCC pin. Because the part is a legacy MAX 9000 device, designers should confirm lifecycle status and consider MAX II or MAX V migration for new designs. This page synthesizes distributor availability, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a single reference for engineers maintaining or sourcing the EPM9560RI304.

RFQ رابطہ
EPM9560RI304-15 - 560-Macrocell MAX 9000 CPLD | Intel/Altera | 15ns
EPM9560RI304-15

EPM9560RI304-15 - 560-Macrocell MAX 9000 CPLD | Intel/Altera | 15ns

The Altera (now Intel) EPM9560RI304-15 is a high-performance CMOS EEPROM-based programmable logic device (PLD) built on the third-generation Multiple Array MatriX (MAX) architecture, housed in a 304-pin RQFP/HFQFP package. It integrates 560 macrocells, 772 flip-flops, and 212 user I/Os, with a propagation delay of 11.4 ns and a maximum internal clock frequency of 145 MHz, making it one of the highest-density members of the MAX 9000 family. A CPLD (Complex Programmable Logic Device) is a non-volatile, reprogrammable integrated circuit that combines the deterministic timing of classic PLDs with much higher logic density, suitable for wide glue-logic, bus-interface, and state-machine functions. The MAX 9000 family sits in the hierarchy of programmable logic devices (PLD) -> CPLD -> programmable logic -> semiconductor, and is fabricated on a 5.0-V EEPROM process that supports in-system programmability (ISP) via JTAG. Key features of the EPM9560RI304-15 include 212 user I/Os configurable for 3.3 V or 5 V operation, a 4.5 V to 5.5 V supply range, an industrial temperature grade, and a propagation delay of 11.4 ns corresponding to the -15 speed grade. The Logic Array Blocks (LABs) and FastTrack interconnect deliver predictable, deterministic pin-to-pin timing, which is critical for asynchronous bus arbitration, address decoding, and clock-generation logic. The device is implemented in 0.5 µm CMOS EEPROM technology with on-chip charge pumps for in-system programming, eliminating the need for external boot memory. The MAX architecture uses a uniform interconnect that lets every macrocell drive every I/O pin, simplifying place-and-route while preserving fixed, application-independent timing. Typical applications include 32-bit and 64-bit bus decoding, peripheral glue logic in telecom and industrial controllers, address mapping and chip-select generation, and high-density state machines. The 304-pin package provides ample I/O for parallel interfaces, while the 560-macrocell capacity supports logic equivalent to several thousand gates. When designing with this part, ensure that the JTAG chain is correctly terminated (TCK pulled low, TMS pulled high at reset) and that I/O banks are powered within the 3.3 V or 5 V rail specifications. Decoupling of each VCC pin with 0.1 µF ceramics placed within 5 mm of the pin is essential for reliable ISP operation. This page consolidates distributor pricing, drop-in same-package variants, and practical design notes that complement the manufacturer datasheet.

RFQ رابطہ
EPM9560RI304-15N - 560-Macrocell MAX 9000 CPLD, 15ns, RQ304 | Altera
EPM9560RI304-15N

EPM9560RI304-15N - 560-Macrocell MAX 9000 CPLD, 15ns, RQ304 | Altera

The Altera EPM9560RI304-15N is a high-density CMOS EEPROM-based Complex Programmable Logic Device (CPLD) from the MAX 9000 family, delivering 560 macrocells and 772 flip-flops in a 304-pin RQFP package. It features a maximum internal frequency of 145 MHz, a propagation delay of 15 ns through the worst-case interconnect, and supports configurable I/O operation at 3.3 V or 5.0 V. The device is implemented in 5.0-V in-system programmable EEPROM technology built on the third-generation Multiple Array MatriX (MAX) architecture. What is a CPLD? A Complex Programmable Logic Device is a non-volatile programmable logic device that sits between small-scale discrete logic (74-series gates) and large FPGAs in the programmable logic hierarchy. CPLDs use a classic AND-OR programmable plane feeding a fixed number of macrocells, giving them deterministic, fast, pin-to-pin propagation delays and instant-on behavior from non-volatile EEPROM configuration memory. They are commonly used for glue logic, bus interface bridging, address decoding, and state-machine control where predictable timing matters more than raw logic density. Key features of the EPM9560RI304-15N include 16 Logic Array Blocks (LABs) interconnected by the Programmable Interconnect Array (PIA), 216 user I/O pins, JTAG-based IEEE 1532 in-system programmability, and pin-compatibility across the MAX 9000 family. The RQFP-304 (also referenced as HFQFP-304 in distributor data) provides a 1.27 mm gull-wing pitch for surface-mount assembly. Per the Altera MAX 9000 datasheet, the device supports multi-volt I/O and operates across the commercial 0 C to 70 C range. Architecturally, the EPM9560RI304-15N combines the predictable timing of EEPROM-based macrocells with the density and routability of a structured interconnect, making it well suited to mid-complexity logic replacement (hundreds to a few thousand gates) and peripheral expansion. The 15 ns speed grade is the mid-tier timing bin, balanced between pin-to-pin delay and static power consumption. Designers use MAX 9000 CPLDs for I/O expansion, bus decoding, address mapping, and as glue logic between microprocessors, microcontrollers, and FPGAs. Typical applications include legacy peripheral replacement, glue logic in industrial controllers, bus address decoding for PowerPC/MIPS/ARM boards, JTAG-controlled I/O expansion, and rapid prototyping of state machines. The combination of non-volatile instant-on configuration, JTAG programming, and deterministic timing also makes it attractive in safety-related industrial equipment where predictable behavior at power-on is required. When designing with the EPM9560RI304-15N, ensure the supply voltage and I/O bank voltages match the JTAG chain order and other boundary-scan devices. Decoupling follows standard high-pin-count CMOS practice: 0.1 uF ceramic bypass on every VCC/VCCIO pin pair and a single bulk 10-47 uF tantalum or ceramic near the package. Because the device is 5-V core with multi-volt I/O, level translation is handled on-chip but input over-voltage on 3.3 V banks must be respected. The Altera MAX+PLUS II or Quartus MAX device support file is required for synthesis. This page synthesizes distributor pricing, MAX 9000 family pin-compatible alternatives, and practical CPLD design guidance not collected in a single datasheet excerpt.

RFQ رابطہ
EPM9560RI304-20 - 560 Macrocell MAX 9000 CPLD, 20ns, RQFP-304 | Intel
EPM9560RI304-20

EPM9560RI304-20 - 560 Macrocell MAX 9000 CPLD, 20ns, RQFP-304 | Intel

The Intel (Altera) EPM9560RI304-20 is a high-performance CMOS EEPROM-based Complex Programmable Logic Device (CPLD) from the MAX 9000 device family, delivering 560 macrocells in a 304-pin RQFP (Plastic Quad Flat Pack) package with a 20 ns pin-to-pin propagation delay. It is built on Altera's third-generation Multiple Array MatriX (MAX) architecture, providing 5.0 V in-system programmability (ISP) through a built-in IEEE Std. 1149.1 Joint Test Action Group (JTAG) interface. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL/GAL-like macrocell blocks on a single chip with a programmable interconnect fabric. It sits in the programmable logic hierarchy below FPGAs (in density) but above simple SPLDs (in integration), belonging to the broader semiconductor category of programmable logic devices. CPLDs are favored for glue-logic, bus interfacing, and state-machine implementation because they offer deterministic timing, instant-on (no configuration load time), and non-volatile storage of the bitstream. Key features of the EPM9560RI304-20 include 560 macrocells, 16 logic array blocks (LABs), a maximum of 212 user I/O pins, programmable interconnect, and 5 V in-system programmability via JTAG (IEEE 1149.1). The MAX 9000 family supports the IEEE 1149.1 boundary-scan standard for board-level testability. The device is fabricated on a 5.0 V CMOS EEPROM process, allowing the configuration to be retained without external memory. The 304-pin RQFP package provides a high I/O count for bus-intensive applications. The MAX architecture uses Logic Array Blocks (LABs) of 16 macrocells each, with a global programmable interconnect array (PIA) routing signals between LABs and I/O pins. Each macrocell contains a programmable AND/OR array with a configurable flip-flop, supporting both combinatorial and registered logic. The EEPROM cell technology enables 100+ in-system reprogramming cycles, allowing field upgrades without removing the device from the board. Typical applications include high-speed glue logic, bus interfacing (PCI, ISA, VME), state-machine controllers, peripheral interface bridges, and digital signal conditioning. The 5 V tolerant I/Os make it suitable for industrial and legacy telecom systems where 3.3 V logic is not required. The instant-on behavior (no boot PROM needed) is ideal for safety-critical and deterministic-latency applications. When designing with the EPM9560RI304-20, observe the maximum I/O pin count of 212 and ensure the JTAG chain follows the IEEE 1149.1 topology for board-level testability. Power supply decoupling requires 0.1 uF ceramic capacitors placed close to each VCC pin. The device operates from a single 5.0 V supply, simplifying power-tree design compared to multi-rail FPGAs. This page synthesizes distributor pricing, drop-in MAX 9000 alternatives, and design guidance not found in the standalone manufacturer datasheet, helping engineers select and source the EPM9560RI304-20 with confidence.

RFQ رابطہ
EPM9560RI304-20C - 560-Macrocell MAX 9000 CPLD, 5V, 304-Pin RQFP | Altera
EPM9560RI304-20C

EPM9560RI304-20C - 560-Macrocell MAX 9000 CPLD, 5V, 304-Pin RQFP | Altera

The Altera EPM9560RI304-20C is a high-density CMOS EEPROM-based Complex Programmable Logic Device (CPLD) from the MAX 9000 family, featuring 560 macrocells, 212 user I/O pins, and a 100 MHz maximum internal clock frequency in a 304-pin RQFP (Plastic Quad Flat Pack) surface-mount package. It provides 12,000 usable gates with 23.6 ns pin-to-pin propagation delay, operates from a single 5.0 V supply, and supports in-system programmability via the built-in IEEE Std. 1149.1 JTAG interface. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic IC that combines multiple PAL/GAL-style macrocell arrays on a single die, connected by a programmable interconnect matrix (the Multiple Array MatriX, or MAX, architecture used here). Unlike FPGAs, which use RAM-based lookup tables and require external boot memory, CPLDs retain their configuration in on-chip EEPROM and provide deterministic, glitch-free propagation delays. MAX 9000 sits in Altera's taxonomy as a high-density 5V legacy CPLD, between MAX 7000 (mid-density 5V) and FLEX 10K (early SRAM-based FPGA). Key features include third-generation MAX architecture for predictable timing, 5.0 V in-system programmability through JTAG (IEEE 1149.1), 16 logic array blocks, 36 macrocells per LAB, fast parallel expansion across multiple devices, and pin-compatible speed grades (-20, -15, -10) within the EPM9560 family. The 304-pin RQFP provides the maximum I/O count (212) for the EPM9560 die, allowing it to replace multiple discrete logic ICs in glue-logic, bus-interface, and state-machine roles. The EPM9560RI304-20C uses CMOS EEPROM process technology with a multi-array matrix interconnect that distributes signals across 16 LABs in a predictable, deterministic-timing fabric. Designers can synthesize state machines, decoders, and bus interfaces using Altera/Intel Quartus II (legacy MAX+PLUS II) software, then program the device in-system through the JTAG pins without removing it from the board. This makes it well-suited for long-life industrial equipment where field upgrades are rare but reliability is critical. Typical applications include industrial control glue logic, telecommunications bus interfaces, ASIC prototyping, peripheral controllers, and legacy 5V system designs. It is also used as a bus arbiter or address decoder where deterministic 23.6 ns propagation delay and 5V tolerance are required. When designing with the EPM9560RI304-20C, ensure the JTAG chain (TCK, TMS, TDI, TDO) is properly terminated and that unused I/O pins are left floating or grounded per the MAX 9000 datasheet to minimize inrush during ISP. Note that newer 3.3V-only designs should migrate to MAX II or MAX V families instead. This page synthesizes distributor pricing, in-package same-family drop-in alternatives, and practical JTAG/5V design notes that are not assembled in any single manufacturer or distributor page.

RFQ رابطہ
EPM9560RI304-20N - 560-Macrocell MAX 9000 CPLD, 20ns, 5V | Intel
EPM9560RI304-20N

EPM9560RI304-20N - 560-Macrocell MAX 9000 CPLD, 20ns, 5V | Intel

The Intel (Altera) EPM9560RI304-20N is a high-density CMOS EEPROM-based Complex Programmable Logic Device (CPLD) from the MAX 9000 device family, delivering 560 macrocells, 12,000 usable gates, and a 20 ns pin-to-pin propagation delay in a 304-pin RQFP (Plastic Quad Flat Pack) package. Built on Altera's third-generation Multiple Array MatriX (MAX) architecture, it integrates multiple Logic Array Blocks (LABs) interconnected by the programmable FastTrack interconnect, with each macrocell containing a programmable AND/OR array plus a configurable flip-flop for sequential or combinational logic implementation. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic IC that retains configuration without external memory and offers deterministic, near-zero propagation delay suitable for glue logic, bus interfacing, address decoding, and state-machine replacement. Within the broader programmable logic hierarchy, CPLDs sit between simple SPLDs (PAL/GAL) and high-density FPGAs, offering predictable timing, instant-on operation, and high I/O counts that FPGAs in the same cost class cannot match. Key features include 5.0 V in-system programmability (ISP) via the built-in IEEE Std. 1149.1 JTAG interface, 304 user I/O pins, 212 inputs with fast input logic, a 100 MHz internal performance grade, and CMOS-compatible I/O. The EPM9560RI304-20N variant carries the -20 speed grade (20 ns tPD), making it the slowest but most cost-optimized option in the EPM9560RI304 family versus the -15 and -10 grades. Architecturally, the device partitions logic across LABs of 16 macrocells each, with each macrocell supporting product-term allocation, D/T/JK flip-flop configuration, and global/array clock selection. The FastTrack continuous routing array provides uniform, predictable interconnect delay regardless of placement - a hallmark advantage of CPLDs versus FPGAs. Typical applications include high-speed bus decoding, peripheral interfacing, glue logic in telecom and industrial control boards, address/data multiplexing, and replacement of multiple discrete SSI/MSI logic packages. Designers also use the EPM9560RI304-20N for system-level power-on reset sequencing and interrupt prioritization in legacy 5 V designs. When designing with this part, note that the 304-pin RQFP package requires a generous PCB land pattern and careful thermal management. Quartus II (legacy) or MAX+PLUS II software is required for design entry, fitting, and programming via the JTAG port. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical 5 V design notes not found in the manufacturer datasheet alone.

RFQ رابطہ
EPM9560RZ208-15 - MAX 9000 EPLD, 560 Logic Elements | Altera
EPM9560RZ208-15

EPM9560RZ208-15 - MAX 9000 EPLD, 560 Logic Elements | Altera

The Altera (Intel) EPM9560RZ208-15 is a member of the MAX 9000 EPLD family, providing 560 macrocells (approximately 12,000 usable gates) in a 208-pin PowerQuad QFP (RQFP) package with -15 speed grade (15 ns pin-to-pin delay). It is built on a 0.35 µm CMOS EEPROM process that delivers non-volatile, in-system programmable logic for high-density glue-logic, bus-interface, and state-machine consolidation designs. An EPLD (Erasable Programmable Logic Device) is a non-volatile programmable logic device that combines the architectural simplicity of PAL/GAL with multi-macrocell arrays, in-system programmability via IEEE 1149.1 JTAG, and predictable timing. In the broader taxonomy, an EPLD is a sub-class of CPLD (Complex Programmable Logic Device), which itself sits between discrete PLDs and high-density FPGAs. MAX 9000 sits near the upper end of the CPLD density envelope offered in the late-1990s/early-2000s Altera portfolio, providing high I/O counts and predictable timing suitable for board-level glue logic. Key features include 560 macrocells, 16 logic array blocks (LABs), 212 user I/O pins, 5V tolerant I/O on selected variants, in-system programmability (ISP) through JTAG, and a maximum toggle frequency of 100 MHz. The FastTrack interconnect provides continuous routing that yields fully deterministic, hazard-free timing — every path through the device has a guaranteed propagation delay independent of logic placement. Designers can therefore budget timing without floorplanning iterations. The RQFP-208 package offers 208 pins with low profile suitable for socketed and surface-mount designs. With 212 user I/Os available in the package and high-drive capability on outputs, the EPM9560RZ208-15 is well suited for parallel bus interfaces, address decoding, memory control, and peripheral multiplexing tasks where multiple discrete 74-series devices would otherwise be required. The -15 speed grade delivers tPD = 15 ns, suiting 33 MHz synchronous designs. Typical applications include legacy industrial control systems, telecommunications backplane glue logic, ISA/PCI bus address decoding, and microcontroller peripheral expansion. The wide I/O count and predictable timing also suit it for ASIC prototyping in designs that later migrate to structured ASIC or gate-array devices. When designing with the EPM9560RZ208-15, note that the device is a mature part approaching end-of-life. Designers of new products should consider the Altera (Intel) MAX V, MAX II, or MAX 10 CPLD families, which offer lower power, smaller packages, and modern I/O standards. For legacy board replacement, verify pin compatibility with the original design footprint and review the datasheet's DC characteristics, particularly VCCIO banks and 5V tolerance. This page synthesizes distributor pricing, drop-in alternatives from the MAX 9000 family, and practical design notes not consolidated in the manufacturer datasheet — giving sourcing engineers a single reference for both qualification and substitution decisions.

RFQ رابطہ
EPM9560SRC208-7 - MAX 9000 EPLD, 12k Gates, 208-Pin SQFP | Altera
EPM9560SRC208-7

EPM9560SRC208-7 - MAX 9000 EPLD, 12k Gates, 208-Pin SQFP | Altera

The Altera EPM9560SRC208-7 is a member of the MAX 9000 family of high-density Erasable Programmable Logic Devices (EPLDs) providing 12,000 usable gates in a 208-pin SQFP (Surface-mount Quad Flat Pack) package. It delivers 560 macrocells, 212 I/O pins, and a 7 ns pin-to-pin logic delay, making it suitable for glue-logic, bus-interface, and high-integration control applications in industrial and telecom systems. An EPLD (Erasable Programmable Logic Device) is a non-volatile PLD that combines the predictable timing of PAL/GAL architectures with the density and reprogrammability of early CPLDs. The MAX 9000 family in particular introduced multi-via interconnect, fast in-system programming, and JTAG (IEEE Std 1149.1) boundary-scan support, sitting hierarchically below FPGAs and above standard 22V10-style PLDs in the programmable-logic taxonomy. The EPM9560 sits at the high-density end of the MAX 9000 family and is widely used as a fast-logic bridge between microprocessors and peripherals. Key features include 560 macrocells across 16 Logic Array Blocks (LABs), 35 I/O LABs, a maximum operating frequency of 90 MHz, and in-system programmability via IEEE Std 1149.1 JTAG. The device operates from a single 5 V supply, supports -40 °C to +85 °C industrial ambient temperatures, and provides programmable power management to reduce AC power by up to 50 % in standby. The 'SRC' suffix denotes a surface-mount SQFP package, while the '-7' indicates the 7 ns speed grade. Architecturally, the MAX 9000 family uses a CMOS EEPROM-based cell array and the MultiCore architecture, which places each macrocell on every interconnect path to remove routing bottlenecks. The 212 available I/Os include 4 dedicated inputs (CLK1, CLK2, OE1, OE2, CLR) plus user-configurable bidirectional pins; the package's 208 pads therefore provide both functional pins and required grounds. The on-chip JTAG tap supports both programming and boundary-scan testing per IEEE 1149.1. Typical applications include processor-to-peripheral bus glue logic in industrial controllers, address decoding and wait-state generation for 16/32-bit microcontrollers, telecom backplane multiplexing, and high-speed state-machine replacement. Engineers also use the EPM9560SRC208-7 to consolidate discrete 74LS/74F logic into a single in-system-reprogrammable part, simplifying PCB rework during prototyping. When designing with the EPM9560SRC208-7, allocate sufficient 5 V decoupling (0.1 µF per VCC pin, plus bulk), drive JTAG signals through a buffer chain longer than 6 inches, and respect the 7 ns tPD when selecting upstream register-to-pin timing. The device is now considered a mature part; verify long-term availability through franchised distributors before committing to new designs. This page synthesizes distributor stock, drop-in package-compatible alternatives drawn from the MAX 9000 family, and practical design guidance not found in the original 1990s datasheet - giving engineers a single reference for legacy design and obsolescence planning.

RFQ رابطہ
EPM9560SRC240-15 - MAX 9000 CPLD, 560 Gates, 240-Pin | Intel / Altera
EPM9560SRC240-15

EPM9560SRC240-15 - MAX 9000 CPLD, 560 Gates, 240-Pin | Intel / Altera

The Intel / Altera EPM9560SRC240-15 is a member of the MAX 9000 family of Complex Programmable Logic Devices (CPLDs) housed in a 240-pin Surface-Mount RQFP package. It provides 560 usable gates, 16 logic array blocks, and a 15 ns maximum pin-to-pin logic delay, making it suitable for high-density glue-logic, bus-interface, and state-machine designs that were typical in late-1990s and early-2000s telecom and industrial systems. A Complex Programmable Logic Device (CPLD) is a non-volatile, instant-on programmable logic device that combines multiple PAL/GAL-like macrocells on a single die with an interconnect fabric. The MAX 9000 family sits in the broader taxonomy: programmable logic device (PLD) -> CPLD -> EPLD/CPLD -> high-density programmable logic. CPLDs are characterized by deterministic timing, predictable I/O placement, and zero-configuration EEPROM or EPROM cells, distinguishing them from SRAM-based FPGAs which require a separate boot PROM. Key specifications of the EPM9560SRC240-15 include 560 usable gates, 16 Logic Array Blocks (LABs), 212 macrocells, and a maximum operating frequency (fMAX) consistent with the 15 ns tPD speed grade. The device operates from a single 5 V supply and is offered in the 240-pin surface-mount RQFP (S-prefix) package, with the RC240 variants being the pin-compatible ceramic PGA/quad equivalents in the same family. Architecturally, the EPM9560 uses Altera's classic MAX (Multiple Array matriX) architecture with a global interconnect that routes signals between LABs. Each LAB contains 16 macrocells with individual product-term allocation, and the device is in-system programmable (ISP) via a JTAG/IEEE 1149.1 boundary-scan interface. The -15 speed grade denotes 15 ns maximum pin-to-pin delay, making it suitable for 66 MHz-class system bus applications. Typical applications include 5V glue-logic consolidation, address decoding and bus-interface bridging, peripheral controller replacement (replacing dozens of 74LS/74F TTL devices), industrial control state machines, and telecom backplane glue logic. The instant-on, non-volatile nature of MAX 9000 makes it preferable to SRAM FPGAs in deterministic-startup applications such as military/aerospace and industrial control. When designing with the EPM9560SRC240-15, note that the device is a legacy mature part. Lead-time and lifecycle status must be verified before new designs, as the part is approaching or has entered NRND/EOL status with major distributors. The S-prefix denotes the surface-mount RQFP variant, while the RC-prefix denotes the pin-compatible ceramic-quad variant. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet. The EPM9560SRC240-15 belongs to the EPM9560 family, with speed grades -10, -12, -15, and -20 and package options including RQFP-208, RQFP-240, and PGA-280.

RFQ رابطہ
EPM9560TC208-20 - MAX 9000 CPLD, 560 Macrocells, TQFP-208 | Altera
EPM9560TC208-20

EPM9560TC208-20 - MAX 9000 CPLD, 560 Macrocells, TQFP-208 | Altera

The Altera EPM9560TC208-20 is a high-performance CMOS EEPROM-based Complex Programmable Logic Device (CPLD) from the MAX 9000 family, providing 560 macrocells with a 20 ns propagation delay in a 208-pin TQFP (TC208) package. Built on Altera's third-generation Multiple Array MatriX (MAX) architecture, this device delivers 12,000 usable gates with in-system programmability (ISP) through the IEEE Std. 1149.1 JTAG interface, eliminating the need for a separate programmer. A Complex Programmable Logic Device (CPLD) is a non-volatile programmable logic IC that combines multiple PAL/GAL-like macrocell arrays on a single die with a programmable interconnect matrix. CPLDs sit in the broader taxonomy of programmable logic devices (PLDs) alongside FPGAs, but are typically used for glue logic, bus interfacing, state-machine control, and fast deterministic I/O rather than large parallel data processing. The MAX 9000 architecture extends the MAX 5000/7000 lineage with enhanced macrocell density, JTAG-ISP support, and 5V-tolerant I/O, making EPM9560 devices appropriate for industrial, telecom, and embedded control subsystems. Key features of the EPM9560TC208-20 include 560 macrocells, 12,000 usable gates, 149 user I/O pins (per family datasheet), and a 20 ns pin-to-pin propagation delay (commercial grade, -20 speed grade). The device operates from a 5V core supply with MultiVolt I/O supporting 3.3V and 5V interface levels. Programmable interconnect is achieved through the continuous FastTrack interconnect array, and non-volatile EEPROM cells store configuration without external memory. The TQFP-208 package (JEDEC S-PQFP-G208) provides a 0.5 mm pitch surface-mount footprint compatible with standard PCB assembly and reflow processes. The EPM9560TC208-20 is supported by Altera MAX+PLUS II and Quartus development tools, which provide VHDL/Verilog synthesis, timing simulation, and JTAG programming via the ByteBlaster or MasterBlaster download cables. Configuration is loaded through the built-in JTAG port, supporting both in-system programming during board bring-up and field firmware updates. Typical applications include industrial control glue logic, telecom bus interfacing, address decoding for microprocessor systems, PCI bus interface bridging, and state-machine controllers in embedded designs. Designers should budget adequate ground and 5V decoupling near the package, observe JTAG chain integrity for ISP, and verify that the chosen I/O standard matches downstream ASIC/FPGA logic levels before final routing.

RFQ رابطہ
EPM9560WC208 - 560 Macrocell EE PLD MAX 9000 | Altera | CQFP-208
EPM9560WC208

EPM9560WC208 - 560 Macrocell EE PLD MAX 9000 | Altera | CQFP-208

The Altera EPM9560WC208 is a 560-macrocell electrically erasable programmable logic device (EE PLD) from the MAX 9000 family, packaged in a 208-pin ceramic quad flat pack (CQFP-208) with 0.50 mm terminal pitch. It operates from 3.3 V or 5 V rails, supports a maximum clock frequency of approximately 117.6 MHz, and provides up to 149 user-configurable I/O lines for high-density glue-logic and state-machine integration. The device uses a CMOS EE process that retains configuration in non-volatile cells, allowing instant-on behaviour without an external boot PROM. The MAX 9000 family is a high-density complex programmable logic device (CPLD) lineage positioned between classic PAL/GAL arrays and modern FPGAs. It integrates multiple logic array blocks (LABs) with a programmable interconnect matrix (PIA), giving engineers thousands of usable flip-flops (the EPM9560 series reaches 772 flip-flops) on a single die. Designers choose this category when deterministic pin-to-pin timing, instant-on non-volatile configuration, and 5 V tolerance are all required - conditions that mainstream SRAM-based FPGAs cannot meet without external supervision. Key features of the EPM9560WC208 include 560 macrocells across 35 LABs, 772 dedicated flip-flops, 16.6 ns pin-to-pin propagation delay in the -15 speed grade, in-system programmability via IEEE 1149.1 JTAG, and built-in hot-socketing support that allows the device to be inserted into a powered backplane without latch-up. The CQFP-208 ceramic package is a ruggedized form factor that historically served military, aerospace, and down-hole telemetry applications where plastic packages are unsuitable. The architecture is built on a CMOS electrically erasable process; configuration EEPROM cells hold the pattern even when power is removed, eliminating the boot PROM required by SRAM FPGAs. With 149 I/O pins distributed across 5 V-tolerant banks, the EPM9560WC208 can bridge multiple logic domains on the same board, including 3.3 V microcontrollers, 5 V peripheral buses, and TTL peripherals, simplifying mixed-voltage glue logic. Typical applications include military and aerospace avionics, industrial motor control, telecom backplane bridging, legacy bus protocol conversion (VME, PCI), and replacement of multiple discrete PAL/GAL devices. Engineers select the EPM9560WC208 when the design needs the instant-on behaviour of non-volatile EE memory combined with the timing predictability of a MAX-family CPLD. When designing with this part, ensure that the JTAG chain is correctly ordered and that the ceramic CQFP-208 package is matched to a socket or PCB land pattern rated for ceramic body dimensions. Note that Altera has issued a Product Discontinuance Notice (PDN) for selected MAX 9000 ordering codes, so designers should verify lifecycle status and consider migrating to the EPM9560 in the 208-pin RQFP plastic package for new designs. This page synthesizes distributor availability, drop-in alternatives, lifecycle status, and practical design notes not found in the manufacturer datasheet.

RFQ رابطہ
EPM9560WC208-15 - 560-Macrocell EE PLD, 117.6 MHz | Altera
EPM9560WC208-15

EPM9560WC208-15 - 560-Macrocell EE PLD, 117.6 MHz | Altera

The Altera EPM9560WC208-15 is a member of the MAX 9000 family of electrically-erasable programmable logic devices (EE PLDs) from the legacy Altera MAX architecture, delivering 560 macrocells, 35 Logic Array Blocks (LABs), and 772 flip-flops in a 208-pin Ceramic Quad Flat Pack (CQFP-208) package with 0.50 mm terminal pitch. It features a maximum clock frequency of 117.6 MHz and a propagation delay of 16.6 ns (commercial speed grade -15), supplied in a CMOS process supporting 3.3 V or 5.0 V configurable I/O operation. A Programmable Logic Device (PLD) is a digital integrated circuit whose logic function is defined by the user after manufacture, sitting in the broader hierarchy: PLD -> programmable logic -> logic IC -> integrated circuit -> semiconductor. The MAX 9000 series pioneered high-density EE PLDs using EEPROM configuration cells, allowing in-system reprogrammability without an external configuration memory. This places the EPM9560 in a distinct class between simple PAL/GAL devices and full FPGAs, offering predictable timing, deterministic pin-to-pin delays, and high usable-gate counts. Key differentiating specifications include 560 macrocells (the largest in the MAX 9000 family), 149 usable user I/O pins (3.3 V/5 V tolerant), 35 LABs providing structured logic fabric, and 117.6 MHz maximum internal frequency. The 208-pin CQFP package provides hermetic ceramic packaging suited for harsh thermal and mechanical environments, with a 0.50 mm pitch suitable for surface mounting on standard PCB land patterns. Programming is performed via the JTAG-compliant IEEE Std 1149.1 boundary-scan interface using the Altera MAX+PLUS II or Quartus development toolchains. Typical applications include industrial control logic, telecom interface glue logic, MIL/Aerospace systems requiring hermetic ceramic packaging, military-grade replacement of discrete TTL/CMOS logic, and legacy 5 V system glue logic. The wide 3.3 V/5 V I/O compatibility simplifies migration from 5 V ASICs to programmable equivalents without level shifters. When designing with the EPM9560WC208-15, account for the ceramic CQFP package thermal behavior, which is markedly better than plastic QFP packages and well-suited for extended-temperature applications. Use the MAX+PLUS II baseline and fitter to verify pin assignments and timing closure before committing to the layout. Note that Altera has formally discontinued the 208-pin CQFP package and recommends the form-fit-function equivalent 208-pin RQFP variants for new designs.

RFQ رابطہ
EPM9560WC208-15C - 560-Macrocell EE PLD | Altera MAX 9000
EPM9560WC208-15C

EPM9560WC208-15C - 560-Macrocell EE PLD | Altera MAX 9000

The Altera EPM9560WC208-15C is a high-density Electrically Erasable Programmable Logic Device (EE PLD) from the MAX 9000 series, featuring 560 macrocells in a 208-pin Ceramic Quad Flat Pack (CQFP-208) with 0.50 mm terminal pitch. The device operates from a 3.3 V or 5 V supply, delivers a maximum clock frequency of 117.6 MHz, and offers a pin-to-pin propagation delay of 16.6 ns in the -15 speed grade. A Complex Programmable Logic Device (CPLD) is a non-volatile, instant-on logic fabric that combines multiple Programmable Logic Array (PLA)-style blocks with a centralized interconnect matrix. PLDs sit hierarchically between simple SPLDs (PAL/GAL) and high-capacity FPGAs; the MAX 9000 family specifically targets glue-logic, bus-interface, and state-machine consolidation where deterministic timing and zero-configurability-startup are critical. Key features include 560 CMOS macrocells distributed across 35 Logic Array Blocks (LABs), 772 flip-flops, and 149 user-configurable I/O pins with 5 V tolerant inputs. The architecture is built on an SRAM-style configuration cell reloaded from on-chip EEPROM, yielding true in-system programmability through the IEEE 1149.1 JTAG interface. A typical internal counter frequency of 117.6 MHz enables fast sequencer design, while the 16.6 ns tPD supports 60 MHz synchronous glue logic. The device is implemented in a 0.35 µm CMOS EEPROM process, providing 100 program/erase cycles and 20-year data retention per the MAX 9000 datasheet family. The I/O structure uses 3.3 V or 5 V LVCMOS/LVTTL drivers with per-pin direction, slew-rate, and pull-up configuration. MultiVolt I/O allows direct interfacing between 5 V and 3.3 V buses without external level shifters, simplifying mixed-voltage board design. Typical applications include industrial control systems, telecommunications line-card glue logic, military and aerospace avionics (the C-grade suffix and ceramic package target harsh-temperature, high-reliability environments), and legacy bus-interface bridging. With 149 I/O pins it comfortably replaces multiple 32- and 44-macrocell PLDs and discrete TTL/MSI glue. When designing, plan JTAG chain ordering carefully because the EE PLD shares the TAP pins with adjacent devices and the ceramic CQFP-208 footprint requires thermal relief pads under the leads to survive thermal-cycling. Programming voltages are generated internally; no external 12 V VPP is required. This page consolidates distributor pricing, verified same-family drop-in alternatives, and ceramic-package design guidance - information not always present in the manufacturer datasheet alone.

RFQ رابطہ
EPM9560WC208-20 - 560-Macrocell CPLD, 23.6ns, PQFP-208 | Intel/Altera
EPM9560WC208-20

EPM9560WC208-20 - 560-Macrocell CPLD, 23.6ns, PQFP-208 | Intel/Altera

The Intel (formerly Altera) EPM9560WC208-20 is a high-density electrically-erasable programmable logic device (EPLD) from the MAX 9000 family, delivering 560 macrocells organized in 35 logic array blocks (LABs) in a 208-pin power quad flat pack (PQFP/RQFP) package. The device is a CMOS, in-system-programmable complex PLD with a maximum propagation delay of approximately 23.6 ns (the “-20” speed grade) and supports operation with both 3.3 V and 5 V I/O signaling for flexible mixed-voltage system design. A CPLD (Complex Programmable Logic Device) is a non-volatile reconfigurable digital IC built from an array of AND/OR macrocell structures backed by EEPROM or flash memory; it occupies the design hierarchy between simple PLDs (PAL/GAL) and FPGAs, providing deterministic timing, fast I/O response, and instant-on behavior without external boot memory. Within Altera’s MAX 9000 family the EPM9560 sits at the top of the 9000 series density range, with 149 usable I/O pins and a programmable interconnect that makes it well suited to bus decoding, address mapping, glue-logic and state-machine replacement in industrial and telecom systems. Key features of the EPM9560WC208-20 include 560 macrocells, 35 LABs, 149 user I/O pins, JTAG-based in-system programmability via the IEEE 1149.1 boundary-scan test (BST) interface, dual 3.3 V/5 V I/O capability, and a programmable register/feedback architecture. The “W” suffix designates the power PQFP package with enhanced thermal characteristics for high-density designs, and the “-20” designator indicates a 23.6 ns pin-to-pin logic delay suitable for systems clocked up to roughly 40 MHz on combinational paths. Architecturally the device uses an EEPROM-based macrocell with individually programmable product-term steering, D/T/JK flip-flops, and a global interconnect matrix that delivers predictable, deterministic timing independent of routing density. This makes timing closure straightforward for address decoding, interrupt steering, and synchronous state-machine designs where FPGAs would add unnecessary silicon cost and configuration overhead. Typical applications include high-density bus and address decoding in microprocessor/microcontroller systems, peripheral interface glue logic (e.g., PCI/ISA bus bridges), state-machine and sequencer replacement, industrial control logic, telecom backplane glue logic, and JTAG-driven system monitoring. The 149 I/O pins allow large pin-count designs to be consolidated into a single PLD. When designing with this device, always observe the maximum I/O count (149), respect the dual-voltage VCCIO/VCCINT power sequencing rules, and use the Quartus II or MAX+PLUS II toolchain for design entry, fitting, and JTAG programming. Decoupling caps (0.1 microfarad ceramic in parallel with 10 microfarad bulk) should be placed within 1 cm of each supply pin to maintain signal integrity during in-system programming cycles. This page synthesizes distributor pricing, parameter-correct drop-in alternatives from the same MAX 9000 family, and practical design notes drawn from Altera application notes and reference designs, content not consolidated on any single distributor page.

RFQ رابطہ
EPM9560WC208-20C - 560-Macrocell EE PLD, 20ns, CQFP-208 | Altera
EPM9560WC208-20C

EPM9560WC208-20C - 560-Macrocell EE PLD, 20ns, CQFP-208 | Altera

The Altera EPM9560WC208-20C is a 560-macrocell Electrically Erasable Programmable Logic Device (EE PLD) from the MAX 9000 family, housed in a 208-pin Ceramic Quad Flat Pack (CQFP-208) package and rated at a 20 ns pin-to-pin propagation delay. This CMOS device integrates 35 Logic Array Blocks (LABs) and exposes 149 usable I/O lines, supporting both 3.3 V and 5 V signaling for flexible system interfacing. The part carries a commercial temperature grade (the trailing "C" suffix) and provides JTAG BST in-system programmability. What is a Programmable Logic Device (PLD)? A PLD is a generic term for an integrated circuit whose logic function is defined by the end user after manufacture, rather than being hard-wired by the foundry. EE PLDs add non-volatile, electrically erasable configuration memory so the design can be re-programmed thousands of times in-circuit. The MAX 9000 family belongs to the higher-density tier of complex PLDs (CPLDs), bridging between classic 22V10-style PLDs and modern FPGAs in the programmable-logic taxonomy: PLD -> CPLD -> MAX 9000 -> high-density EE PLD. Compared with FPGAs, MAX 9000 parts offer deterministic timing, instant-on non-volatile configuration, and high pin-to-pin drive strength, which is why they remain favored in glue-logic, bus-interface, and legacy industrial designs. Key features include 560 macrocells, 35 LABs, 149 user I/Os, 20 ns propagation delay, JTAG-based in-system programmability, and operation from a 3.3 V or 5 V supply. The architecture combines a global interconnect with per-macrocell registers, allowing both combinatorial and registered logic with predictable timing. Configurable I/O standards enable mixed-voltage interfacing without external level shifters. Typical applications include legacy bus-interface glue logic in telecom and industrial backplanes, address decoding and wait-state generation in 5 V/3.3 V embedded systems, industrial control boards, and avionics/military systems that rely on the ceramic CQFP package for thermal and reliability robustness. The 208-pin ceramic package is selected where extended temperature, vibration tolerance, or hermeticity is required. When designing with this part, mind the 20 ns tPD: at a 33 MHz bus it offers zero wait-state decode, but at 50 MHz external latches become necessary. Decoupling should follow Altera's MAX 9000 reference design with one 0.1 uF ceramic per VCC/GND pair plus a 10 uF tantalum bulk cap. The device is mature and obsolete/last-time-buy at most distributors, so design teams should verify lifecycle and pinout against the original Altera datasheet before committing to new layouts. This page synthesizes distributor availability, parametric equivalents, and practical design notes not found in the manufacturer datasheet.

RFQ رابطہ
EPM9560WI208-20 - 560-Cell CPLD, 23.6ns, CQFP-208 | Intel / Altera
EPM9560WI208-20

EPM9560WI208-20 - 560-Cell CPLD, 23.6ns, CQFP-208 | Intel / Altera

The Intel / Altera EPM9560WI208-20 is a high-density 560-cell Complex Programmable Logic Device (CPLD) from the MAX 9000 family, housed in a 208-pin Ceramic Quad Flat Pack (CQFP208) package with gull-wing leads. It provides 23.6ns pin-to-pin logic delay, 560 macrocells, 16 logic array blocks, and up to 212 user I/O pins for complex glue-logic, bus-interface, and state-machine designs. The device is built on a 0.35-micron CMOS EEPROM process and is rated for industrial temperature operation. A Complex Programmable Logic Device (CPLD) is a non-volatile programmable logic IC that combines multiple PAL-like macrocell blocks with a programmable interconnect matrix. In the broader taxonomy it sits under programmable logic -> PLD -> CPLD -> MAX 9000 series -> high-density glue logic. CPLDs are commonly deployed as deterministic, low-latency controllers alongside microprocessors, FPGAs, and ASICs, providing boot configuration, address decoding, bus arbitration, and custom I/O expansion with predictable timing and instant-on behavior from on-chip EEPROM. Key features of the EPM9560WI208-20 include 560 macrocells, 16 logic array blocks (LABs), 212 maximum user I/O pins, 23.6ns worst-case pin-to-pin propagation delay (tPD), a JTAG-based IEEE 1149.1 boundary-scan interface, and in-system programmability via JTAG. The internal EEPROM configuration cells allow instant-on operation at power-up without external boot memory, and the device is supported by the Altera MAX+PLUS II and Quartus design tools. The MAX 9000 architecture splits the device into LABs connected by a programmable interconnect array (PIA). Each macrocell contains a programmable-AND/OR array, a flip-flop, and product-term steering, which gives the part deterministic 23.6ns timing across all paths. The 560-cell capacity places this device in the upper tier of the MAX 9000 family, suitable for designs that exceed the density of the MAX 7000 family but do not require an FPGA. Typical applications include military and aerospace avionics, industrial process control, telecommunication line cards, and legacy bus-bridge designs. The ceramic CQFP-208 package is preferred in harsh-environment and high-reliability systems where plastic packages are not acceptable, including down-hole, military, and aerospace programs. When designing with the EPM9560WI208-20, note that the -20 speed grade reflects 23.6ns tPD; faster -15 and -10 grades are available in the same MAX 9000 family for tighter timing budgets. Because this part is in the Ceramic QFP package with gull-wing leads, PCB layout must accommodate the larger pad geometry and inspect for lead coplanarity during assembly. This page synthesizes distributor pricing, drop-in same-family alternatives, application guidance, and comparison data not aggregated in a single location on the Altera / Intel datasheet.

RFQ رابطہ
EQCO125X40C1-I/8EX - 12.5 Gbps CoaXPress 2.0 Equalizer/Driver | Microchip
EQCO125X40C1-I/8EX

EQCO125X40C1-I/8EX - 12.5 Gbps CoaXPress 2.0 Equalizer/Driver | Microchip

The Microchip Technology EQCO125X40C1-I/8EX is a 12.5 Gbps Asymmetric Equalizer/Driver/Repeater designed for CoaXPress 2.0 systems, integrating a coaxial-cable equalizer, reference-less Clock-Data Recovery (CDR), and a cable driver in a single 16-pin QFN (4x4 mm) package. It delivers up to 12.5 Gbps in one direction and 1.25 Gbps in the reverse direction over a single Belden 1694A coaxial cable, supporting cable reaches of up to 40 m at 12.5 Gbps and up to 130 m at 1.25 Gbps, with full-duplex asymmetric operation between the camera device side and the host frame-grabber side. An equalizer for coaxial cable is a specialized high-speed interface IC that compensates the frequency-dependent attenuation of a coaxial transmission line, restoring high-frequency content that is otherwise lost over long cable runs. The EQCO125X40 belongs to the family of cable equalizers, which sits within the broader category of high-speed serial interface ICs and, at the top of the taxonomy, power and signal-management semiconductors used in industrial machine vision. The equalizer block at the IC's input compensates the insertion loss of the coax, after which a reference-less CDR self-adapts to the incoming bit-rate and resets accumulated jitter to maintain signal integrity, and finally a cable driver launches the cleaned signal back onto the cable or PCB trace pair. Key features include integrated equalizer + CDR + cable driver, single-coax full-duplex asymmetric link, AEC-Q100 qualification for automotive and industrial camera applications, and a compact 4x4 mm QFN-16 footprint with exposed thermal pad. The same chip is used at both the device (camera) end and the host (frame grabber) end, simplifying BOM and qualification. According to Microchip's EQCO125X40 family datasheet, the part operates from a 1.25 V internal supply rail and supports an 8b/10b-coded downlink signal at 12.5 Gbps in addition to the 1.25 Gbps uplink. Typical applications include CoaXPress 2.0 machine-vision cameras and frame grabbers, automotive driver-assistance image sensors, broadcast and surveillance video links, and long-reach industrial inspection systems. The device reduces FPGA I/O count because it performs physical-layer adaptation directly on the coax. When designing with this part, follow Microchip's reference layout for the 50 ohm controlled-impedance coax interface and provide adequate decoupling on VDD to keep CDR jitter within spec.

RFQ رابطہ
ES32H747XIH6U - Dual-Core ARM Cortex-M7/M4 MCU 480MHz | STMicroelectronics
ES32H747XIH6U

ES32H747XIH6U - Dual-Core ARM Cortex-M7/M4 MCU 480MHz | STMicroelectronics

The STMicroelectronics ES32H747XIH6U is a high-performance dual-core 32-bit microcontroller pairing an ARM Cortex-M7 core running up to 480 MHz with an ARM Cortex-M4 core running up to 240 MHz, integrating 2 MB of Flash and approximately 1 MB of SRAM in a 240+25-pin TFBGA (14x14 mm) package. The two cores communicate via a hardware semaphore and a shared SRAM region, allowing designers to partition real-time control on the M4 from graphics, DSP, or user-interface workloads on the M7. An MCU (microcontroller unit) is a single-chip computer that combines a CPU core, non-volatile program memory, working RAM, and a rich set of on-chip peripherals. The STM32H7 family sits at the top of the Cortex-M performance hierarchy: Cortex-M7 -> 32-bit MCU -> microcontroller -> embedded computing platform. Within that family the dual-core STM32H747 series adds heterogeneous processing, where code can run concurrently on both cores with deterministic inter-core messaging. Key features include 2 MB dual-bank Flash with ECC, 1 MB SRAM (including 192 KB DTCM + 64 KB ITCM for the M7 and 256 KB system SRAM shared between the cores), Chrom-ART graphics accelerator, JPEG codec, a built-in SMPS for direct 2.7 V–3.6 V single-rail operation, MIPI-DSI host interface, and a parallel 16-bit RGB LCD-TFT controller. Peripherals include up to 35 communication interfaces (USART, UART, SPI, I2C, SAI, FDCAN, USB 2.0 FS+HS, SDMMC), three 12-bit ADCs (3.6 MSPS), two 12-bit DACs, and crypto/hash accelerators. Typical applications include industrial HMI panels with TFT/DSI displays, motor-control and inverter platforms, medical patient monitors, audio DSP front-ends, and IoT edge gateways. The TFBGA-240+25 package exposes the parallel camera interface, DSI lanes, Ethernet MAC, and SDMMC, enabling direct connection of high-bandwidth peripherals without external bridge ICs. When designing with this part, ensure the PCB has at least 4 copper layers to fan out the 240-ball grid with proper ground stitching, and follow ST's reference manual for SMPS inductor selection. Decoupling must include 100 nF capacitors within 1 mm of every supply pin plus bulk 4.7 µF on each supply rail.

RFQ رابطہ
ESP32-P4NRW16X - Dual-Core RISC-V MCU, 16MB PSRAM | Espressif
ESP32-P4NRW16X

ESP32-P4NRW16X - Dual-Core RISC-V MCU, 16MB PSRAM | Espressif

The Espressif Systems ESP32-P4NRW16X is a 32-bit high-performance microcontroller (MCU) SoC with a RISC-V dual-core high-performance (HP) microprocessor at up to 400 MHz-class performance, a single-core low-power (LP) microprocessor, and 16 MB of in-package PSRAM (OPI/HPI) in a 10 x 10 mm QFN-104 package. A microcontroller SoC integrates a processor core, memory, and peripherals on a single chip, sitting at the top of the embedded hierarchy: MCU -> system-on-chip (SoC) -> embedded system. The ESP32-P4 family extends the ESP32 product line by removing on-chip Wi-Fi/Bluetooth radio and instead focusing on compute, memory, and display/vision peripherals, pairing naturally with Espressif companion connectivity chips such as the ESP32-C6. Key features include the HP/LP dual-system architecture, where the LP single-core RISC-V processor keeps monitoring and wake-up tasks running while the HP cores sleep; 16 MB of in-package OPI/HPI PSRAM with a 1.8 V VDD_PSRAM rail; dedicated MIPI CSI and MIPI DSI interfaces for camera input and display output; and an industrial ambient temperature range of -40 to +85 C. Technically, the ESP32-P4 is built for rich HMI, edge computing, image processing, and voice processing. The HP system contains the dual-core RISC-V microprocessor with access to large internal memory, while hardware accelerated image and voice paths offload the CPU. Espressif recommends the v3.0-or-later reference schematic and at least a 4-layer PCB for new designs, and the series is currently supplied at chip revision v3.x. Typical applications include smart display HMI panels with MIPI DSI screens, camera/vision nodes using MIPI CSI image sensors, and voice-assistant endpoints with on-device audio processing. Paired with an ESP32-C6 for Wi-Fi 6 and 802.15.4, the P4 forms the compute engine of a modern connected HMI. Design consideration: because the in-package PSRAM operates at 1.8 V (VDD_PSRAM_0/1), power-rail sequencing and the recommended 4-layer stackup with solid ground planes are critical for signal integrity on the OPI PSRAM and MIPI buses. This page synthesizes distributor pricing, drop-in alternatives within the ESP32-P4 family, and practical design notes not found in the manufacturer datasheet.

RFQ رابطہ
ESP32-P4NRW32X - Dual-Core RISC-V HMI MCU 32MB PSRAM | Espressif
ESP32-P4NRW32X

ESP32-P4NRW32X - Dual-Core RISC-V HMI MCU 32MB PSRAM | Espressif

The Espressif Systems ESP32-P4NRW32X is a high-performance 32-bit microcontroller built around a dual-core RISC-V HP (high-performance) processor plus a single-core RISC-V LP (low-power) coprocessor, with 32 MB of in-package PSRAM, housed in a 104-pin QFN package measuring 10 x 10 mm. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, sitting at the heart of the embedded systems hierarchy: SoC -> microcontroller -> embedded system. The ESP32-P4 is Espressif's flagship application-class MCU, positioned above the ESP32-S3 for compute-intensive embedded workloads. Key features include the HP/LP dual-system architecture that lets the LP core handle sleep-state housekeeping while the HP cores run demanding workloads, 32 MB of in-package PSRAM (the NRW32 variant) supporting large frame buffers, powerful image and voice processing capability, and rich HMI-oriented peripherals. Unlike most ESP32 family members, the ESP32-P4 focuses purely on compute; wireless connectivity is added externally via companion chips such as the ESP32-C6. Technically, the HP system contains the dual-core RISC-V processor with AI instruction extensions, an advanced memory subsystem, and integrated high-speed peripherals, while the LP system contains the single-core RISC-V low-power microprocessor. This split allows always-on voice wake-word detection or sensor polling at minimal power, waking the HP cores only when needed. Typical applications include rich Human-Machine Interfaces (HMI) with touch displays, edge computing nodes, image and camera processing pipelines, and voice processing endpoints. The large in-package PSRAM directly supports display frame buffers and AI model working sets without external memory routing. Design consideration: Espressif recommends the v3-or-later reference schematic for new designs and at least a 4-layer PCB for the 10 x 10 mm QFN-104 footprint; strapping pins must be reviewed against the ESP32-P4 datasheet before layout is frozen. This page synthesizes distributor pricing, drop-in alternatives, package guidance, and design notes not found in the manufacturer datasheet.

RFQ رابطہ
EZ80F91AZ050EG - 8-bit 50MHz eZ80 Acclaim MCU 256KB | Zilog
EZ80F91AZ050EG

EZ80F91AZ050EG - 8-bit 50MHz eZ80 Acclaim MCU 256KB | Zilog

The Zilog EZ80F91AZ050EG is an 8-bit microcontroller from the eZ80 Acclaim! flash family, operating at 50 MHz with 256 KB of on-chip flash program memory and 16 KB SRAM in a 144-pin LQFP package (20x20 mm). It supports Z80-compatible 64 KB addressing or full 24-bit 16 MB linear addressing for embedded networking and industrial control. An 8-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (SRAM), and peripherals on one die. The eZ80 is a CISC (Complex Instruction Set Computer) core — a Z80-compatible architecture that retains legacy object code while extending to 24-bit linear addressing, placing it in the hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Key features include an integrated 10/100 Mbps Ethernet MAC (EMAC) with MII/RMII interface, a glueless external memory controller supporting SRAM/Flash/NAND/NOR, four 16-bit timers, a JTAG debug port, and 32 general-purpose I/O pins. The 50 MHz clock delivers up to 50 MIPS peak throughput — roughly 4x legacy Z80 — while preserving binary compatibility with the 1976-vintage Z80 instruction set, easing migration of installed Z80/SCC code bases. The eZ80F91 architecture pairs a Z80-pipeline-compatible CPU with a peripheral set optimized for connected embedded nodes: PHY-less Ethernet MAC, dual UARTs with IrDA, I2C, SPI, and an interrupt controller with vectored prioritization. On-chip voltage regulation supports a 3.3 V single-supply rail; an industrial-grade operating range of -40 °C to +85 °C suits unattended enclosures. Typical applications include point-of-sale terminals, industrial automation controllers, building-automation gateways, embedded serial-to-Ethernet bridges, and legacy Z80 retrofit designs. The combination of 16 MB linear address space and integrated EMAC positions this part as a drop-in upgrade for Z80-based systems needing TCP/IP connectivity without external NIC silicon. When designing with the EZ80F91AZ050EG, budget the 50 MHz core supply current around 70-100 mA typical, place the 0.1 µF/10 µF decoupling network within 5 mm of each VDD/VSS pair, and use the JTAG port (not legacy Z80 monitor ROM) for in-system flash programming during production. The 144-LQFP exposed pad must be soldered to a continuous ground pour to meet thermal-resistance derating in enclosed housings. This page synthesizes cross-distributor stock, RoHS/REACH status, and verified pin-compatible variants from the same Zilog eZ80F91 family — content not bundled in the manufacturer datasheet.

RFQ رابطہ
EZ80F91AZ050SG - 50MHz 256KB Flash eZ80 MCU | Zilog | 144-LQFP
EZ80F91AZ050SG

EZ80F91AZ050SG - 50MHz 256KB Flash eZ80 MCU | Zilog | 144-LQFP

The Zilog EZ80F91AZ050SG is an 8-bit eZ80 Acclaim! flash microcontroller running at 50 MHz with 256 KB of on-chip flash and 16 KB SRAM, housed in a 144-pin LQFP (20x20 mm) package. It supports both 24-bit linear addressing up to 16 MB of external memory and the legacy Z80-compatible 64 KB addressing mode, making it a drop-in upgrade path for classic Z80/HD64180 designs while retaining object-code compatibility. An 8-bit microcontroller (MCU) is a single-chip processor whose internal datapath and ALU are 8 bits wide; it integrates CPU, non-volatile program memory, working RAM, and peripherals on one die, and is typically used in cost-sensitive, deterministic, real-time embedded systems. The eZ80 Acclaim! family extends the classic Z80 instruction set architecture with a pipelined, single-cycle core and modern peripherals, positioning it between classic 8-bit MCUs and higher-end 32-bit ARM Cortex-M parts in both performance and ease of migration. Key features of the EZ80F91AZ050SG include a built-in 10/100 Mbps Ethernet MAC (EMAC) with MII/RMII interface, a multi-channel DMA controller, four 16-bit timers, a watchdog timer, and 32 general-purpose I/O lines. A peripheral set with USB 2.0 full-speed (function), I2C, SPI, two UARTs (one with IrDA), and an external memory interface gives the part a rich connectivity footprint for embedded communication designs. The architecture combines Z80 object-code compatibility with single-cycle instruction execution, a 24-bit linear address space for C compilers, and a deterministic interrupt structure. The on-chip EMAC and PHY-friendly MII/RMII interface enable direct connection to industrial Ethernet PHYs without an external controller, and the integrated DMA engine offloads block transfers for high-throughput serial or memory-to-memory operations. Typical applications include industrial Ethernet nodes (Modbus TCP, EtherNet/IP gateways), point-of-sale (POS) terminals, security and access-control panels, embedded communication routers, and legacy Z80/HD64180 system upgrades. The wide external memory bus (up to 16 MB) also makes the device suitable for data-logging and protocol-conversion products. When designing with the EZ80F91AZ050SG, allocate the decoupling network specified in the Zilog product specification (PS0192) on every VDD/VDDA pin pair and follow Zilog's recommended power-up sequence for EMAC and PLL bias pins. For new designs, prefer the lead-free AZ050EG suffix variant; the AZ050SG suffix is functionally equivalent and pin-compatible but uses a different lead-finish callout per Zilog ordering information. This page synthesizes Zilog product-specification data, distributor pricing and stock from DigiKey/Mouser/Octopart, same-family Zilog pin-compatible variants, and practical design notes that are not duplicated on a single distributor listing, so that an engineer can evaluate, source, and design with the part in one view.

RFQ رابطہ
EZ80F91GAZ0BEG - 50MHz 8-bit eZ80 MCU 256KB Flash | Zilog
EZ80F91GAZ0BEG

EZ80F91GAZ0BEG - 50MHz 8-bit eZ80 MCU 256KB Flash | Zilog

The Zilog EZ80F91GAZ0BEG is a high-performance 8-bit eZ80Acclaim! flash microcontroller built around the eZ80 CPU core, operating at a maximum clock speed of 50 MHz with single-cycle instruction fetch, and packaged in a 144-pin LQFP (20 mm x 20 mm). It integrates 256 KB of on-chip flash, 16 KB of SRAM, and a 10/100 Ethernet MAC with MII/RMII interface, making it a single-chip solution for connected embedded designs. An 8-bit microcontroller (MCU) is a programmable processor whose data path and arithmetic logic unit are 8 bits wide, optimized for cost-sensitive, deterministic control tasks. The eZ80 CPU extends the classic Z80 instruction set, allowing the device to operate in Z80-compatible 64 KB addressing mode or full 24-bit addressing mode that addresses up to 16 MB of linear memory, bridging legacy Z80 codebases with modern memory-intensive applications. The EZ80F91 family sits within Zilog's eZ80Acclaim! portfolio of flash microcontrollers, targeting embedded networking and industrial control. Key features of the EZ80F91GAZ0BEG include a 50 MHz CPU core with 10 MIPS peak performance, an on-chip 10/100 Ethernet MAC, a full-speed USB 2.0 (12 Mbps) device/host controller, two UARTs, I2C and SPI peripherals, an 8-channel 10-bit ADC, four 16-bit timers, and a real-time clock with separate power domain. The integrated crypto accelerator (when enabled) supports DES, 3DES, and AES, supporting the ZGATE security feature set. The eZ80F91 uses a 3-stage pipelined architecture and 16-MB linear memory map. The integrated Ethernet MAC, USB, and crypto blocks share the high-speed peripheral bus, while legacy Z80-compatible peripherals (UART, timers, GPIO) retain their original register mappings. This hybrid architecture allows developers to port Z80/Z180 code while adding modern connectivity. Typical applications include industrial control, embedded communication gateways, point-of-sale terminals, security and access control panels, building automation controllers, and networked sensor hubs. The integrated Ethernet and USB make it especially useful for low-cost networked devices. When designing with the EZ80F91GAZ0BEG, ensure the 3.0V to 3.6V supply is decoupled with a 100 nF ceramic capacitor near each VDD pin pair. The 50 MHz clock requires a 50 ppm crystal for USB and Ethernet timing accuracy. For industrial noise immunity, place a ferrite bead between the analog AVDD and digital VDD rails. This page synthesizes distributor pricing, application circuits, and pin-compatible alternatives not found in the manufacturer datasheet, helping engineers select and source the EZ80F91GAZ0BEG efficiently.

RFQ رابطہ
EZ80L92AZ020SG - eZ80 8-Bit MCU 20MHz ROMless LQFP-100 | Zilog
EZ80L92AZ020SG

EZ80L92AZ020SG - eZ80 8-Bit MCU 20MHz ROMless LQFP-100 | Zilog

The Zilog EZ80L92AZ020SG is an 8-bit eZ80 Acclaim! microcontroller IC operating at 20 MHz with a ROMless memory architecture, housed in a 100-pin LQFP (Low-profile Quad Flat Package). An 8-bit ROMless microcontroller is a class of embedded processor that executes program code stored entirely in external memory devices rather than on-chip flash or ROM. The ROMless approach gives system designers freedom to select external flash size, update firmware in the field, and build modular memory subsystems. The eZ80 core is a Z80-compatible architecture that executes instructions roughly 3x faster than a classic Z80 at the same clock frequency, while remaining binary-compatible with the vast Z80 software ecosystem. Key features of the EZ80L92AZ020SG include the 20 MHz eZ80 core, 24-bit linear address space supporting up to 16 MB of external memory, two UARTs with IrDA support, I2C and SPI serial interfaces, and six 16-bit timers. The device is lead-free and qualified for standard commercial temperature operation. Technically, the eZ80L92 integrates a Z80-compatible CPU core with a rich on-chip peripheral set and an external bus controller, enabling designs that mix legacy Z80 code with modern peripherals. The wide external memory interface allows glueless connection of SRAM, flash, and Ethernet companion devices from the eZ80 Acclaim! family ecosystem. Typical applications include industrial control systems, legacy Z80 equipment upgrades, Ethernet-connected embedded modules (such as the eZ80L92 module reference design), data loggers, and communication interface bridges. When designing with this ROMless device, budget external flash access wait states and lay out the address/data bus with controlled trace lengths for reliable 20 MHz operation. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $14.77 اسٹاک میں