Sản phẩm (38.000+)

TAS5504PAG - 4-Channel Digital Audio PWM Processor | Texas Instruments
TAS5504PAG

TAS5504PAG - 4-Channel Digital Audio PWM Processor | Texas Instruments

Texas Instruments TAS5504PAG is a four-channel digital audio PWM processor with I2C and I2S interfaces, supplied in a 64-pin TQFP package measuring 10 mm by 10 mm. Its verified operating supply range is 3 V to 3.6 V, and the supported audio sampling-rate range is 32 kHz to 192 kHz. The processor is designed to accept digital audio data, perform configurable digital signal processing, and generate modulated outputs for downstream power stages. A digital audio PWM processor is a specialized signal-processing IC used to transform digital audio streams into control signals for power amplifiers and other audio output stages. Within the broader hierarchy, it belongs to digital signal processing, audio processing, and power-management interface components. Its digital architecture separates audio data conversion from the final analog power-amplifier stage, allowing digital controls and processing to operate before the signal reaches the power circuitry. The TAS5504PAG provides four independent audio channels and supports digital interfaces described in the verified distributor data as I2C and I2S. The I2S interface is used for serial audio data transfer, while I2C supports device configuration. The 32 kHz to 192 kHz range covers standard consumer-audio rates through high-resolution audio, making the processor applicable to multichannel audio systems that need centralized digital control. Its 64-TQFP package provides 64 connection positions for digital audio data, control, clocking, power, ground, and configuration signals. The 10 mm by 10 mm package is larger than a compact QFN but offers ample routing access for the numerous interfaces needed by a four-channel processor. A multilayer PCB with a low-impedance ground plane and short, terminated clock and data routes is appropriate when signal integrity is important. Typical applications include digital active speakers, multichannel audio amplifiers, home-theater amplification, soundbars, and compact consumer-audio systems. The processor can receive digital audio from a source or host processor and provide modulation data for a multi-channel amplifier stage. Compared with an analog-input-only controller, a digital architecture can preserve the source signal in digital form until power amplification. The primary design consideration is confirming that the host interface, audio data format, sample rate, channel mapping, and amplifier topology match the system requirements. The 3 V to 3.6 V supply range also requires regulators with suitable headroom and low-noise behavior. Decoupling capacitors should be positioned close to the supply and ground pins, while clock and I2S traces should be routed away from switching nodes. This page consolidates verified distributor specifications, current pricing references, same-package replacement candidates, and practical implementation guidance. It also distinguishes verified drop-in candidates from higher-channel-count devices that are not true pin-compatible replacements, helping engineers avoid an unqualified board-level substitution.

RFQ Liên hệ
TAS5508PAG - 8-Channel Digital Audio PWM Processor | TI
TAS5508PAG

TAS5508PAG - 8-Channel Digital Audio PWM Processor | TI

Texas Instruments TAS5508PAG is an eight-channel digital audio PWM processor packaged in a 64-pin TQFP. It is designed to provide integrated digital-audio modulation for systems requiring eight simultaneous processing channels, precise timing, and coordinated signal generation. The manufacturer identifies the device as a PWM processor with eight digital channels, positioning it between general-purpose digital signal processing and a dedicated audio-class conversion controller. A digital audio PWM processor converts digital audio information into controlled pulse-width-modulated outputs for downstream power stages, amplifiers, or associated signal-chain functions. This device category belongs to the broader hierarchy of digital audio IC, audio signal processor, semiconductor, and embedded audio system. Its eight-channel architecture is intended to reduce the number of separate digital-to-audio modulation functions required in multi-channel amplification and audio-routing equipment. The TAS5508PAG combines eight-channel PWM processing with high system integration in its 64-pin TQFP package. The 64-pin package provides the external connections needed for multi-channel control, data exchange, configuration, clocking, and power connections. According to the manufacturer datasheet, the device supports eight simultaneous digital-audio channels, while the verified product descriptions consistently identify the TAS5508PAG as an eight-channel digital audio PWM processor. From a design perspective, channel synchronization and digital timing are central considerations because the processor coordinates multiple PWM outputs. Designers should preserve the data, clock, reset, control, and power topology shown in the manufacturer reference design and observe the recommended external-component values. Accurate layout, clean reference connections, and controlled clock routing help maintain consistent behavior across all eight channels and reduce sensitivity to noise or timing skew. Typical end uses include multichannel class-D audio amplification, powered speakers, home-theater equipment, active loudspeaker systems, and other multichannel audio products. In these systems, the TAS5508PAG can manage the digital audio modulation stage while external amplifier and output stages perform the required power conversion. The exact supported digital interface, sample-rate range, clock requirements, and channel operating modes should be confirmed from the manufacturer datasheet before schematic release. The primary design trade-off is integration versus board area: one 64-pin TQFP consolidates eight-channel processing but requires careful pin assignment, multilayer routing, and power-plane planning. Use the manufacturer pin-description table when assigning tracks, and use the datasheet evaluation-circuit and layout guidance when deriving a production PCB. This page summarizes the verified device identity and provides practical application, comparison, and sourcing guidance while clearly separating confirmed facts from parameters requiring datasheet confirmation.

RFQ Liên hệ
TAS5518PAG - 8-Channel Digital Audio PWM Processor | Texas Instruments
TAS5518PAG

TAS5518PAG - 8-Channel Digital Audio PWM Processor | Texas Instruments

Texas Instruments TAS5518PAG is an 8-channel digital audio PWM processor with a typical system dynamic range of 110 dB and a 64-pin TQFP (PAG) package. The device integrates digital audio processing, power-supply volume control, and multi-channel PWM output functionality into one audio-focused system IC. It is intended for designs that require coordinated audio-channel control without implementing eight separate digital input channels and PWM output stages. A digital audio PWM processor is a mixed-signal audio IC that accepts digital audio information and controls PWM-based amplifier stages. Within the audio signal-chain hierarchy, it sits between a digital audio source and a power-amplifier or speaker-driving circuit. Unlike a conventional analog power amplifier, the TAS5518PAG manages digital modulation data, volume-related functions, and channel integration, allowing the connected amplifier stage to reproduce the intended audio signal. The principal system benefit is high integration. According to the Texas Instruments product information, the TAS5518PAG supports eight digital audio channels in one device. A well-designed system can achieve typical dynamic range of 110 dB, while the power supply volume control feature provides up to 24 dB of additional dynamic range at normal listening levels. This combination can reduce external control-component complexity and centralize audio-volume behavior across multiple channels. The TAS5518PAG also provides direct support for digital-audio signal processing before the PWM output stage. This architecture is appropriate for multichannel consumer-audio equipment where synchronized channel control and system-level volume management are more important than a conventional standalone analog output stage. Its 64-pin TQFP (PAG) package provides the pin count needed for multichannel digital interfaces, control signals, power connections, and multiple PWM outputs. Typical uses include powered speakers, soundbars, home-theater audio systems, active speakers, multichannel audio receivers, and compact consumer audio products. The device can serve as the central PWM processor in an eight-channel signal path when its digital interface, output arrangement, and power architecture align with the selected amplifier topology. Board-level implementation must account for clean power, grounded return paths, signal integrity, and thermal performance. Designers should verify the complete pin arrangement, recommended external components, interface timing, and power-supply requirements in the manufacturer datasheet before routing a new PCB. Because this orderable designation is marked as not recommended for new designs, new products should first evaluate TI's current alternate-part recommendations and confirm functional, firmware, and mechanical compatibility rather than assuming direct interchangeability. This page consolidates the device classification, verified package information, lifecycle position, candidate replacement information, and practical selection guidance. It also distinguishes confirmed drop-in information from broader functional alternatives, helping engineers make a defensible sourcing decision without treating similar audio processors as footprint-compatible substitutes.

RFQ Liên hệ
TAS5548DCA - 8-Channel 96kHz PWM Audio Processor | TI
TAS5548DCA

TAS5548DCA - 8-Channel 96kHz PWM Audio Processor | TI

The Texas Instruments TAS5548DCA is an 8-channel digital pulse-width-modulation audio processor with digital audio processing, an integrated asynchronous sample-rate converter, and a 96 kHz PWM output stage, housed in a 56-pin HTSSOP package. It combines eight-channel audio processing with integrated sample-rate conversion to support high-definition home-theater signal paths. An audio processor is a specialized interface IC that manages digital audio data between source devices and power-conversion stages. Within the broader hierarchy, the TAS5548DCA belongs to digital audio processing, audio system semiconductors, and power-management signal-chain components. Its PWM outputs provide a digital representation of audio waveforms for downstream amplification and speaker-drive circuitry. The device includes two asynchronous sample-rate-converter modules, with each module handling four channels. This arrangement allows the processor to support multichannel operation and aligns it with DTS-HD-compatible Blu-ray home-theater-in-a-box applications identified by Texas Instruments. The architecture also consolidates digital audio processing, sample-rate conversion, and eight-channel PWM modulation into one package. TAS5548DCA is controlled through an external I2C interface, enabling an embedded host or audio system controller to configure the processor and manage its operating state. Integrating digital control with multichannel PWM output reduces the number of separate functional blocks needed in compatible home-theater and powered-speaker systems while preserving a centralized digital signal path. Typical implementation areas include DTS-HD-compatible Blu-ray home-theater systems, multichannel powered speakers, digital active loudspeakers, home-theater processor boards, and other audio equipment requiring eight PWM channels. The 56-pin HTSSOP package is designed for surface-mount assembly, while the stated operating-temperature range is 0°C to +85°C. Layout planning should prioritize short, controlled connections among the digital-audio inputs, I2C control interface, ground network, supply rails, and PWM outputs. Because the device combines high-channel-count processing with a fine-pitch surface-mount package, careful decoupling and return-path design are essential for reliable signal transfer and thermal performance. This page combines the manufacturer product information with practical distinctions for evaluating the TAS5548DCA, including its 8-channel architecture, 96 kHz PWM operation, integrated ASRC, package format, application fit, and the documentation needed for PCB and firmware planning.

RFQ Liên hệ
TAS5558DCA - 8-Channel HD Audio DSP with PWM | Texas Instruments
TAS5558DCA

TAS5558DCA - 8-Channel HD Audio DSP with PWM | Texas Instruments

The Texas Instruments TAS5558DCA is an 8-channel HD-compatible digital audio processor with digital pulse-width modulation output and an integrated sample-rate converter, supplied in a 56-pin HTSSOP DCA package. It operates across the manufacturer-listed temperature range of -40 °C to 85 °C and supports a maximum PWM modulation frequency of 0.4 MHz. Its two independent ASRC modules each handle four channels, allowing simultaneous conversion across all eight output channels. A digital audio processor is a specialized integrated circuit that accepts digital audio data, performs configurable signal processing, and produces a format suitable for downstream power amplification. Within the broader semiconductor hierarchy, the TAS5558DCA belongs to the audio special-purpose IC and digital signal processor categories. Its integrated sample-rate converter, digital audio processing, and PWM generation combine several discrete audio functions into one high-integration device. The principal feature set includes eight audio processing channels, advanced digital audio processing, an integrated sample-rate converter, and eight PWM outputs. These functions target HD-compatible home-theater-in-a-box applications described by Texas Instruments, including systems associated with DTS-HD Blu-ray playback. A 0.4 MHz maximum modulation frequency provides the timing headroom required by the device's specified PWM output architecture. Technically, the TAS5558DCA is designed around two separate ASRC modules rather than one shared converter. Each module processes four channels, allowing up to eight channels to be supported concurrently. This modular channel organization can simplify system partitioning when comparing input sample rates, but it does not eliminate the need to verify supported formats, clocking, and configuration details in the manufacturer documentation. Typical uses include Blu-ray home-theater-in-a-box amplifiers, multi-channel digital audio power stages, powered speakers, and consumer audio systems requiring eight PWM channels. The processor is most appropriate where digital signal processing, sample-rate conversion, and class-D-style PWM modulation must be integrated into a compact design. Designers should preserve the exposed-pad thermal and layout requirements of the HTSSOP package and verify all digital audio interfaces against the manufacturer datasheet. Because several electrical, timing, and pin-level details are not present in the supplied source excerpts, those values must be confirmed in the full Texas Instruments technical documentation before layout release. This page consolidates the verified channel count, package, temperature range, PWM frequency, source links, procurement information, and engineering limitations for TAS5558DCA. It also distinguishes verified facts from missing datasheet parameters, helping engineers evaluate the device without mistaking generic audio-IC characteristics for guaranteed TAS5558DCA specifications.

RFQ Liên hệ
TAS5601DCA - 20W Stereo Class-D Amplifier | Texas Instruments
TAS5601DCA

TAS5601DCA - 20W Stereo Class-D Amplifier | Texas Instruments

Texas Instruments TAS5601DCA is a 20 W per channel digital Class-D audio amplifier power stage with a 10 V to 26 V supply and PWM single-ended input. The device is supplied in a 56-pin HTSSOP (DCA) package and can configure its four half-bridge outputs for stereo bridge-tied loads, four single-ended loads, or a mixture of both. A digital Class-D audio amplifier is a switching power stage that uses pulse-width-modulated drive signals to deliver power efficiently to loudspeakers. Unlike a conventional linear audio amplifier, the TAS5601 converts the PWM input into high-frequency switching currents, reducing the amount of power dissipated within the output stage. The TAS5601 belongs to the Class-D amplifier hierarchy, where its four half bridges provide the switching elements required for stereo speaker drive. The principal operating specifications are 20 W per channel, a 10 V to 26 V supply range, and PWM single-ended input. The amplifier is designed for speakers with an impedance as low as 4 ohms. According to the manufacturer datasheet, Rev. A, efficiency exceeds 90% when driving an 8-ohm load. This efficiency figure is especially useful when comparing thermal requirements with less efficient linear amplification approaches. Each output half bridge includes integrated feedback support, allowing the amplifier to operate with a conventional speaker connection rather than requiring a separate analog output filter. The device supports two bridge-tied speakers or four single-ended speakers, and the same output network can also be arranged for a combination of single-ended and bridge-tied loads. The resulting flexibility permits speaker-count changes without changing the amplifier package or control architecture. Typical uses include powered speakers, stereo audio receivers, multimedia speaker systems, sound bars, consumer television equipment, and compact audio products requiring multiple speaker outputs. The 10 V to 26 V supply range is suited to systems using a 12 V or 24 V rail, while the four-half-bridge architecture is useful when the design must accommodate both stereo and multiway speaker configurations. Design the power rails, output inductors, speaker connections, and thermal copper around the maximum 26 V operating condition. Speaker wiring and amplifier outputs must be kept away from sensitive signal paths, and the PCB layout should follow the manufacturer reference layout to control switching noise, ground bounce, and unintended electromagnetic coupling. This page organizes the verified operating characteristics, amplifier configuration options, sourcing information, and engineering trade-offs around the TAS5601DCA. It also distinguishes genuine drop-in alternatives from package or ordering-code variations so that PCB reuse decisions remain based on pin compatibility rather than nominal power capability alone.

RFQ Liên hệ
TAS5602DCA - 20W Stereo PWM-Input Class-D Power Stage | TI
TAS5602DCA

TAS5602DCA - 20W Stereo PWM-Input Class-D Power Stage | TI

The Texas Instruments TAS5602DCA is a 20 W per channel stereo digital Class-D audio amplifier power stage with PWM input, housed in a 56-pin HTSSOP (DCA) package with an exposed thermal pad. It operates from a 10 V to 26 V supply and can drive four single-ended speakers or two bridge-tied (BT) speakers from a single device. A Class-D audio amplifier is a switching power amplifier that delivers audio output by applying a constant-amplitude PWM carrier to the speaker load, so the transistor output stage conducts only when the PWM signal is active. In the device hierarchy, TAS5602DCA belongs to the amplifier IC family, inside audio amplifiers, inside integrated circuits, inside analog power and signal-chain semiconductors. Unlike a conventional analog input amplifier, this part accepts a PWM signal directly from a digital audio processor or a Class-D modulator, eliminating an analog input stage and its associated noise and distortion. Key features include 20 W of continuous output power per channel, a wide 10 V to 26 V operating supply range, and support for both single-ended and bridge-tied speaker configurations. Because the part accepts PWM rather than an analog voltage, the noise floor is set entirely by the upstream digital source, which keeps inter-channel noise and distortion very low and makes channel matching essentially perfect. The device supports 2-channel stereo, 4-channel quad, and mono operation modes, giving a single part number flexibility for multiple speaker topologies. Internally, the TAS5602 architecture combines a half-bridge output stage with integrated feedback control, so the amplifier can be configured with or without a feedback resistor network to suit the target speaker impedance. Because output stage switching is fully synchronous and the modulator runs at a high carrier frequency, the switching losses remain low and the power stage can be mounted on standard two-layer PCB copper without a bulky external heatsink in typical 10 W per channel designs. Typical applications include consumer and industrial audio: multi-room and networked speakers, sound bars, TV and monitor speaker drivers, Bluetooth and Wi-Fi speaker systems, USB and PC audio docks, and powered speaker systems. The 56-pin HTSSOP package with exposed pad provides a large thermal copper area, which is essential for continuous 20 W per channel operation from a 24 V rail. When laying out the board, treat the exposed pad as both the thermal path and the main ground return. Use a solid ground pour with minimal inductance between the output drivers and the supply bypass capacitors, and place the input PWM traces away from the switching node to avoid coupling the carrier frequency into the audio path. This page brings together the manufacturer ordering information, a parameter-by-parameter comparison against related Texas Instruments Class-D power stages, and practical thermal and layout guidance that goes beyond the headline specifications found in the datasheet.

RFQ Liên hệ
TAS5612PHD - 125W Stereo Class D Amplifier | Texas Instruments
TAS5612PHD

TAS5612PHD - 125W Stereo Class D Amplifier | Texas Instruments

The Texas Instruments TAS5612PHD is a PurePath HD Class D audio power amplifier rated for 125 W per channel in stereo operation and 250 W in mono operation. It accepts one-channel mono or two-channel stereo signals and is packaged in a 64-pin HTQFP measuring 14 mm by 14 mm. The device is intended for high-power audio systems requiring efficient amplification into 4 ohm to 8 ohm speaker loads. A Class D audio amplifier is a switching power amplifier whose transistor output stage operates with controlled PWM signals. Compared with a linear audio amplifier, this topology can convert amplifier input power into speaker output power more efficiently, reducing heat and allowing high output power in a compact package. The TAS5612PHD belongs to the broader hierarchy of audio amplifiers, audio power amplifiers, power management ICs, and semiconductors. The primary performance ratings are 125 W stereo output, 250 W mono output, and operation from a 16 V to 34.1 V supply range. A 10.8 V to 13.2 V range is also associated with the device in the technical listing. Its integrated closed-loop feedback technology, called PurePath HD, helps the amplifier correct output-voltage distortion through the speaker connection rather than relying only on feedback around the power stage. The device supports either one-channel mono operation or two-channel stereo operation. This flexibility makes it suitable for home-theater power stages, professional audio amplification, subwoofer amplifiers, and compact high-power speaker systems. The 64-pin HTQFP package requires a carefully designed exposed-pad thermal layout, and its power-class application makes heat dissipation a central PCB-design requirement. For robust implementation, designers should follow the manufacturer datasheet for the recommended power topology, input filtering, speaker output network, supply decoupling, and thermal land pattern. The evaluation module TAS5612/14PHD2EVM provides a practical reference for evaluating TAS5612PHD alongside TAS5614PHD and TAS5518PAG in a PurePath HD audio system. This page combines the manufacturer device ratings with practical guidance for thermal management, output-network implementation, supply decoupling, and device selection. It also distinguishes confirmed family alternatives from components that only provide related functionality but cannot be assumed to be pin-compatible replacements.

RFQ Liên hệ
TAS5630DKD - 300W Stereo Class-D Amplifier | Texas Instruments
TAS5630DKD

TAS5630DKD - 300W Stereo Class-D Amplifier | Texas Instruments

The Texas Instruments TAS5630DKD is an analog-input Class-D audio power amplifier using PurePath HD integrated closed-loop feedback, with capability to deliver up to 300 W stereo or 600 W mono into 4 Ω to 8 Ω speakers. It is supplied in a 44-pin HSSOP power package with an exposed heat slug for thermal-interface installation. Achievable output power depends on the thermal configuration of the application. A Class-D amplifier is a switching audio power stage in which the output transistors operate at high frequency and deliver speaker current with high efficiency. In the amplifier hierarchy, the TAS5630 belongs to the audio amplifier IC category, then to the Class-D amplifier group and finally to the power-amplifier IC class. Its integrated closed-loop feedback is intended to reduce distortion associated with conventional open-loop Class-D output stages, while retaining the efficiency benefits of switching conversion. The main performance attributes are up to 300 W stereo output, up to 600 W mono operation, 4 Ω to 8 Ω speaker compatibility, and a 50 V power-stage supply assumption. The manufacturer documentation also shows a 10.8 V to 13.2 V signal-supply range in its application description. The 44-HSSOP package provides a large thermal connection area, but power capability depends on the heat sink, thermal interface material, copper area, board construction, and ambient conditions rather than package marking alone. PurePath HD technology is the defining architectural feature. The TI product page identifies the TAS5630 as a high-performance analog-input Class-D amplifier with integrated closed-loop feedback. Analog input allows compatibility with conventional line-level audio signals, while the integrated feedback arrangement supports a power-stage design intended for high-output applications. The manufacturer specifically recommends a low-noise, low-output-impedance 12 V regulator for the signal supply and a low-impedance, low-noise 50 V power-stage supply. Typical uses include professional power amplifiers, high-power stereo audio systems, cinema and home-theater speaker amplification, and bridged mono installations for subwoofers or full-range speakers. The device is particularly relevant where a single power amplifier must support both stereo and bridged-mono configurations, although the external supply, output-filter, speaker, and thermal designs remain application-specific. Thermal design is the principal implementation constraint. The exposed package heat slug must be coupled to a suitable heat sink through a high-performance thermal interface material, and the power stage requires stable, low-impedance supplies. Use the application diagrams in the manufacturer datasheet to select inductors, capacitors, power-supply components, and the PCB thermal interface for the intended output impedance and power level. This page organizes the manufacturer specifications, verified source links, application guidance, and replacement considerations into an engineering-focused reference. It also distinguishes confirmed package and output capabilities from parameters that require direct checking in the TI datasheet before schematic release, PCB construction, or production procurement.

RFQ Liên hệ
TAS5701PAP - 20W Stereo Class-D Amplifier | Texas Instruments
TAS5701PAP

TAS5701PAP - 20W Stereo Class-D Amplifier | Texas Instruments

Texas Instruments TAS5701PAP is a 20-W stereo digital-input Class-D audio power amplifier with hardware control, operating from a 0- to 21-V supply in a 64-pin HTQFP (PAP) package measuring 10 x 10 mm. Two serial data inputs support up to three discrete audio channels, with SDIN1 routed to internal left and right outputs and SDIN2 dedicated to SUB_PWM± outputs. A Class-D audio power amplifier is a switching power-conversion device that efficiently delivers audio energy to bridge-tied speakers. The Class-D hierarchy is part of switching amplifiers, audio amplifiers, and broader power-management semiconductors. Unlike a linear output stage, a Class-D design moves most signal amplification into switching transistors, improving efficiency while requiring careful output filtering, power-supply design, and electromagnetic-interference control. The TAS5701PAP provides 20 W of stereo audio power and accepts digital audio data, making it suitable for consumer audio equipment that receives its source signal from a digital audio codec or processor. Its hardware control interface supports integration into systems requiring amplifier enable, mute, reset, or operating-mode management. The device is offered in a surface-mount HTQFP package with 64 pins and an operating temperature range of 0°C to 85°C. Internally, the device uses digital audio input and PWM-based output modulation. SDIN1 supplies the left and right stereo channels, while SDIN2 supports dedicated subwoofer PWM outputs. The TAS5701 operates as a clock-slave device, meaning it requires clocks from an external source rather than generating the master audio clock itself. This architecture simplifies synchronization with a digital audio processor but makes the external clock and serial-data timing central to the system design. Typical applications include compact stereo speakers, powered multimedia speakers, sound bars, active subwoofer systems, and digital audio products requiring a bridge-tied Class-D output stage. The dedicated subwoofer PWM path can support systems combining stereo playback with an additional low-frequency channel. Because the amplifier is not a linear audio amplifier, its supply rails and output filters strongly influence noise, distortion, and EMI behavior. When implementing this device, use the manufacturer datasheet reference layout and place the input, supply, ground, and output-filter components according to the specified layout. Maintain short high-current supply paths and adequate ground-plane continuity. Check speaker impedance, output-filter component tolerances, thermal conditions, and the external master-clock requirements before releasing the PCB layout. This page consolidates verified manufacturer and distributor information, strict same-package replacement screening, package and lifecycle details, and practical design guidance. It distinguishes confirmed TAS5701PAP characteristics from parameters that require confirmation in the manufacturer datasheet or current authorized-channel quotation.

RFQ Liên hệ
TAS5704PAP - 20W Stereo Class-D Amp | Texas Instruments
TAS5704PAP

TAS5704PAP - 20W Stereo Class-D Amp | Texas Instruments

The Texas Instruments TAS5704PAP is a 20 W stereo, digital-input Class-D audio power amplifier operating from a 10 V to 26 V supply and packaged in a 64-pin HTQFP (PAP) with exposed pad. It supports stereo or quad-channel processing, speaker equalization, dynamic range control, hardware control, and digital feedback for efficient bridge-tied speaker drive. A Class-D audio power amplifier is a switching amplifier within the broader hierarchy of audio amplifiers, analog and mixed-signal ICs, and semiconductor signal-processing devices. Instead of operating the output transistor continuously as a linear amplifier, it uses a switching output stage to convert a digital or analog audio signal into high-efficiency bridge-tied speaker drive. The TAS5704 integrates digital signal processing, modulation, and output-stage functions into one device. Key features include 20 W per stereo channel into an 8 ohm load from an 18 V supply, two serial digital audio inputs supporting up to four discrete channels, and a hardware-configurable data path. These features allow the amplifier to interface with compatible digital audio processors while providing system-level control over channel routing, speaker EQ, DRC, and mute or shutdown behavior. The device uses a digital audio datapath and a feedback architecture to monitor the Class-D output stage. The two serial inputs accept multiple discrete channels and operate with digital processors that support compatible data formats and clock rates. An exposed thermal pad beneath the 64-pin package provides the primary heat-transfer path from the power amplifier and control circuitry to the PCB. Typical uses include compact stereo speakers, powered Bluetooth and Wi-Fi speaker systems, soundbars, consumer audio equipment, and other products that require a digital Class-D output stage with local EQ and DRC. The integrated processing can reduce the need for separate audio DSP components when the required presets and routing functions are supported by the TAS5704 configuration. PCB design should preserve the exposed-pad thermal path with a continuous ground plane and via array, place power-supply and ground connections close to the device, and route sensitive clock and serial-data lines away from switching-node conductors. Speaker and supply connections must also be sized for the intended output power; otherwise connector, copper, and thermal limitations can restrict real-world output below the stated 20 W condition.

RFQ Liên hệ
TAS5705PAP - 20W Stereo Class-D Amplifier | Texas Instruments
TAS5705PAP

TAS5705PAP - 20W Stereo Class-D Amplifier | Texas Instruments

The Texas Instruments TAS5705PAP is a 20 W stereo digital-input Class-D audio power amplifier with an 8 V to 23 V supply range, speaker equalization and dynamic range control, packaged in a 64-pin HTQFP (PAP) package. It is designed to drive stereo bridge-tied speakers while accepting digital audio from a compatible processor. A Class-D audio power amplifier is a switching-based amplifier that delivers speaker output at high efficiency compared with conventional linear audio amplifiers. The TAS5705 belongs to the hierarchy digital audio power amplifier, Class-D amplifier, audio amplifier, amplifier IC and power-management semiconductor. Its digital signal path allows system-level processing to be integrated closer to the speaker output while retaining a compact surface-mount implementation. Verified product information identifies the TAS5705 as a 20 W stereo device with an 8 V to 23 V supply, digital input, open-loop Class-D architecture, speaker EQ and DRC. Distributor listings also describe the PAP configuration as a two-channel amplifier with stereo headphone and subwoofer features. These characteristics position it for consumer audio systems requiring a digital audio interface and local speaker-drive capability. The open-loop Class-D topology delegates loop filtering to external components, allowing the analog filter design to be selected for the intended speaker bandwidth, output-power target and system cost. Integrated EQ and DRC provide tools for controlling tonal response and limiting output excursion, although exact processing configuration depends on the device registers and the associated control software or external digital processor. Typical uses include compact stereo speakers, multimedia systems, sound bars, home-audio products and consumer audio receivers with a digital signal source. Digital input makes the device especially useful where the host processor already provides decoded PCM audio and system designers want to keep the audio signal in the digital domain until the final power-amplifier stage. A key design consideration is that the external LC filter and speaker load directly affect achievable output power, distortion and stability. Layout should follow the manufacturer's recommended application circuit, keep switching-current paths compact and place the filter components close to the appropriate output pins. This page consolidates verified manufacturer and distributor information, drop-in replacement candidates, package details and engineering guidance into one searchable reference for designers evaluating the TAS5705PAP in digital-input stereo audio systems.

RFQ Liên hệ
TAS5706PAP - 20W Stereo I2S Class D Amplifier | TI
TAS5706PAP

TAS5706PAP - 20W Stereo I2S Class D Amplifier | TI

Texas Instruments TAS5706PAP is a 20 W stereo closed-loop I2S audio power amplifier with speaker EQ and DRC, packaged in a 64-pin HTQFP (PAP) measuring 10 x 10 mm. It supports two-channel stereo or four-channel quad operation, processes as many as four discrete audio channels, and is designed to drive stereo bridged-tied speakers through an efficient Class D output stage. A Class D audio power amplifier is a switching-based amplifier that delivers audio through a high-efficiency output stage. Its hierarchy places it within digital audio amplifiers, then audio amplifiers, then analog and mixed-signal integrated circuits. The TAS5706PAP combines a digital serial-audio input interface, programmable signal routing, speaker equalization, and dynamic range control in one device. This integration reduces the need for separate digital signal processing in systems requiring local audio conditioning. Three headline features define the device: up to 20 W of stereo output power, an I2S-compatible digital audio interface, and closed-loop Class D amplification. The amplifier can route as many as four discrete audio channels to its internal outputs, while its speaker EQ and DRC functions add system-level acoustic processing. The 64-pin HTQFP package supports compact surface-mount implementation in consumer audio and communication equipment. The TAS5706PAP accepts serial digital audio data from digital audio processors and MPEG decoders. Its programmable data path provides flexible channel routing, and two serial data inputs allow a system to handle multiple discrete channels. Because the processing and output functions are integrated, a designer can place EQ and dynamic range control immediately before the power-conversion stage instead of implementing those operations in an external processor. Typical applications include powered speakers, compact stereo audio systems, soundbars, automotive or portable audio products, and embedded multimedia equipment. The closed-loop output architecture is particularly appropriate for bridged-tied speaker configurations where the amplifier must support the speaker load while maintaining the required output-power level. Systems should also account for the device's digital audio configuration and power-delivery requirements during board layout. The primary design consideration is preserving the integrity of the I2S clock and data signals while providing clean, stable power to the Class D output stage. Layout should minimize high-current output-loop area, provide appropriate supply and ground-return paths, and separate sensitive digital inputs from switching-node energy. Speaker filtering and output-network implementation must also be selected for the intended load and acoustic response. This page consolidates the verified manufacturer description, distributor package information, technical source links, application guidance, and honest replacement analysis for TAS5706PAP. It also identifies where verified public data is limited, avoiding invented electrical details or unsupported drop-in substitutions.

RFQ Liên hệ
TAS5707PHP - 20W Stereo Class-D Amplifier | Texas Instruments
TAS5707PHP

TAS5707PHP - 20W Stereo Class-D Amplifier | Texas Instruments

The Texas Instruments TAS5707PHP is a 20-W open-loop stereo digital-input Class-D audio power amplifier with speaker EQ and dynamic range control (DRC), housed in a 48-pin HTQFP (PHP) package. The device is intended for driving stereo bridge-tied speakers from a digital audio source and combines an efficient Class-D output stage with integrated digital audio processing. Its digital input architecture supports programmable speaker EQ and DRC, while the open-loop design gives the system designer control over the signal chain and processing configuration. According to the verified TI product and distributor information, the TAS5707PHP provides a two-channel stereo output solution for compact consumer, communication, and embedded audio systems where efficiency, digital control, and speaker-driver capability are important design priorities. A Class-D audio power amplifier is a switching power amplifier that converts a digital or analog audio input into a high-efficiency speaker drive signal. Compared with a linear audio amplifier, the Class-D architecture reduces the amount of power dissipated by the output devices, which is valuable in portable and space-constrained equipment. The TAS5707PHP includes integrated audio processing functions that help tailor the output for speaker characteristics and system volume requirements. This combination of digital input, programmable processing, and a 20-W stereo output makes the device useful in speakers, sound bars, television equipment, and other systems requiring local amplification of a digital audio stream. The verified product description identifies the TAS5707PHP as a 20-W stereo digital audio power amplifier with speaker EQ and DRC. The stereo configuration allows two discrete audio channels to be processed and amplified in a single device, reducing the component count compared with separate mono amplifier channels. The open-loop architecture is also important because it provides a defined signal path that can be integrated with an external audio processor or system controller. The device therefore serves both as a power stage and as a digitally controlled audio subsystem element. The main engineering tradeoff is that the design must be validated for speaker impedance, power limitations, thermal conditions, and the specific digital audio configuration. The manufacturer product page identifies TAS5707PHP as not recommended for new designs, so it should be selected primarily for existing designs, legacy platforms, or qualified repair and production situations rather than as the default choice for a new product. The 48-pin HTQFP (PHP) package also requires a PCB footprint and land pattern that match the manufacturer package drawing. TAS5707PHP can be used in compact stereo speakers, television or monitor audio, communication terminals, portable equipment, and other embedded audio products where two amplified channels are needed. Digital audio sources can feed the amplifier through its digital input, allowing EQ and DRC to be configured in the digital processing domain. Designers should confirm the required sample rate, audio-word format, channel count, speaker impedance, power target, and control configuration against the manufacturer datasheet before layout or firmware development. This product page consolidates the verified TI product description, distributor package information, pricing reference, lifecycle indication, and practical application guidance for engineers evaluating TAS5707PHP. It emphasizes the distinctions that affect a real replacement decision: the 20-W stereo Class-D output, digital-input architecture, integrated speaker EQ and DRC, 48-pin HTQFP (PHP) package, and the manufacturer's not-recommended-for-new-designs status.

RFQ Liên hệ
TAS5708PHP - 20W Stereo Class-D Audio Amplifier | Texas Instruments
TAS5708PHP

TAS5708PHP - 20W Stereo Class-D Audio Amplifier | Texas Instruments

The Texas Instruments TAS5708PHP is a 20 W stereo digital Class-D audio power amplifier with an I2S input, closed-loop feedback, speaker equalization, and dynamic range control, housed in a 48-pin HTQFP (PHP) package. It operates from a 10 V to 26 V supply and is designed to drive stereo bridge-tied speakers with 20.2 W per channel. A digital Class-D audio power amplifier is a power-management IC that accepts digital audio samples and uses internal switching and feedback circuitry to deliver power to loudspeakers. The Class-D topology belongs to the switching-amplifier hierarchy rather than conventional linear amplifiers, improving efficiency while the integrated digital signal path controls volume, equalization, and speaker dynamics. The TAS5708 provides a 32-bit datapath, on-chip dynamic range control, and speaker equalization. Its digital input avoids the prescaling requirements associated with some older audio amplifiers and preserves signal integrity while processing audio. Closed-loop feedback is specifically identified for this device, providing a defined relationship between the amplifier output and the commanded speaker drive. The integrated processing functions reduce the need for separate software or analog signal-conditioning blocks in consumer audio equipment. Dynamic range control can maintain perceived loudness while reducing distortion or clipping, while speaker equalization can compensate for acoustic and enclosure response differences. Exact filter coefficients, configuration registers, protection thresholds, and thermal limits must be confirmed in the manufacturer datasheet before implementation. Typical uses include compact stereo speakers, multimedia speaker systems, Bluetooth speaker enclosures, soundbars, consumer television audio, and other powered speaker products. The 10 V to 26 V supply range suits systems using an external Class-D-compatible supply while keeping the amplifier integrated with digital audio processing. A key design consideration is that the exposed thermal pad and output-filter layout must follow the manufacturer's reference design. Power loss depends on supply voltage, output power, modulation method, and filter efficiency, so thermal analysis should use the worst-case audio waveform rather than only a continuous sine-wave condition. This product record combines manufacturer and distributor information with verified same-family alternatives, package-aware comparisons, and practical implementation guidance. It distinguishes confirmed specifications from values that require engineers to consult the full datasheet or design-support resources.

RFQ Liên hệ
TAS5709PHP - 20W Stereo Class-D Amplifier | Texas Instruments
TAS5709PHP

TAS5709PHP - 20W Stereo Class-D Amplifier | Texas Instruments

The Texas Instruments TAS5709PHP is a 20 W stereo, 2-channel Class-D digital audio power amplifier with an 8 V to 24 V supply, digital input, speaker equalization, and dynamic range control, housed in a 48-pin HTQFP (PHP) package. A Class-D audio power amplifier is a switching power stage that converts digital audio signals into high-efficiency bridge-tied speaker drive. Within the broader hierarchy, the TAS5709PHP belongs to the digital audio amplifier class, then audio amplifiers, then amplifier ICs and analog/mixed-signal semiconductors. Its digital input and integrated processing allow a host processor to deliver audio directly without requiring a separate analog-to-digital converter or pre-amplifier stage. The device provides 20 W stereo output, operates from an 8 V to 24 V supply, and supports digital audio input through a serial interface. On-chip speaker EQ and dynamic range control provide programmable acoustic functions before the signal reaches the power stages. These functions make the amplifier useful where cabinet, speaker, and source characteristics require system-level audio adjustment rather than fixed analog gain alone. Technically, the TAS5709PHP integrates a digital signal-processing path with two Class-D output channels designed to drive stereo bridge-tied speakers. The verified manufacturer information identifies the device as an open-loop Class-D amplifier, meaning the IC is intended for use with external closed-loop feedback circuitry. System designers must therefore account for the feedback network, filtering requirements, output configuration, and protection strategy when developing the speaker-amplifier stage. Typical uses include stereo speaker amplification in consumer electronics, audio racks, television systems, and embedded digital-audio products. Its digital input can simplify connections to audio processors, MPEG decoders, and digital audio sources, while integrated EQ and dynamic range control can reduce the amount of host-side processing required for common speaker-management functions. A key design consideration is the relationship between supply voltage, speaker impedance, thermal dissipation, and Class-D output filtering. The amplifier should be placed near the speaker connectors, with its power and ground system designed to minimize switching noise and output-stage instability. Verify the external feedback and filter topology against the manufacturer datasheet before production use. This page consolidates verified manufacturer and distributor information, practical design guidance, and clearly qualified replacement considerations. It also separates confirmed same-family parts from candidates whose pin compatibility cannot be established from the supplied web evidence, helping engineers make sourcing decisions without treating merely similar devices as true drop-in replacements.

RFQ Liên hệ
TAS5709PHPR - 20W Stereo Class-D Amplifier | Texas Instruments (Tape & Reel)
TAS5709PHPR

TAS5709PHPR - 20W Stereo Class-D Amplifier | Texas Instruments (Tape & Reel)

The Texas Instruments TAS5709PHPR is a 20 W stereo, 2-channel Class-D digital audio power amplifier with an 8 V to 24 V supply, digital input, speaker equalization, and dynamic range control, housed in a 48-pin HTQFP (PHP) package. A Class-D audio power amplifier is a switching power stage that converts digital audio signals into high-efficiency bridge-tied speaker drive. Within the broader hierarchy, the TAS5709PHPR belongs to the digital audio amplifier class, then audio amplifiers, then amplifier ICs and analog/mixed-signal semiconductors. Its digital input and integrated processing allow a host processor to deliver audio directly without requiring a separate analog-to-digital converter or pre-amplifier stage. The device provides 20 W stereo output, operates from an 8 V to 24 V supply, and supports digital audio input through a serial interface. On-chip speaker EQ and dynamic range control provide programmable acoustic functions before the signal reaches the power stages. These functions make the amplifier useful where cabinet, speaker, and source characteristics require system-level audio adjustment rather than fixed analog gain alone. Technically, the TAS5709PHPR integrates a digital signal-processing path with two Class-D output channels designed to drive stereo bridge-tied speakers. The verified manufacturer information identifies the device as an open-loop Class-D amplifier, meaning the IC is intended for use with external closed-loop feedback circuitry. System designers must therefore account for the feedback network, filtering requirements, output configuration, and protection strategy when developing the speaker-amplifier stage. Typical uses include stereo speaker amplification in consumer electronics, audio racks, television systems, and embedded digital-audio products. Its digital input can simplify connections to audio processors, MPEG decoders, and digital audio sources, while integrated EQ and dynamic range control can reduce the amount of host-side processing required for common speaker-management functions. A key design consideration is the relationship between supply voltage, speaker impedance, thermal dissipation, and Class-D output filtering. The amplifier should be placed near the speaker connectors, with its power and ground system designed to minimize switching noise and output-stage instability. Verify the external feedback and filter topology against the manufacturer datasheet before production use. This page consolidates verified manufacturer and distributor information, practical design guidance, and clearly qualified replacement considerations. It also separates confirmed same-family parts from candidates whose pin compatibility cannot be established from the supplied web evidence, helping engineers make sourcing decisions without treating merely similar devices as true drop-in replacements.

RFQ Liên hệ
TAS5710PHP - 20W Stereo Class-D Amplifier | Texas Instruments
TAS5710PHP

TAS5710PHP - 20W Stereo Class-D Amplifier | Texas Instruments

Texas Instruments TAS5710PHP is a 20 W stereo, digital-input, closed-loop Class-D audio amplifier with speaker equalization and 2-band dynamic range control, housed in a 48-pin HTQFP package measuring 7 x 7 mm. The device operates from a 10 V to 26 V power-supply range and is designed to drive stereo bridge-tied speakers through its integrated digital audio processing and class-D output stages. A Class-D audio amplifier is a switching power amplifier that uses pulse-width modulation to deliver speaker power efficiently. Compared with a linear audio amplifier, this approach reduces the amount of power dissipated as heat in the output stage. A digital-input device accepts encoded audio data rather than an analog line-level signal, allowing software-defined volume, equalization, and dynamic-range-control functions to be applied before the signal reaches the power-output stage. The TAS5710PHP combines two stereo output channels, digital signal processing, and closed-loop output feedback in one package. Its identified 20 W output capability is suitable for compact consumer-audio equipment where space and power efficiency matter. The integrated equalization function can shape speaker response, while the 2-band DRC can reduce unwanted level variation. Exact processing coefficients, gain settings, output-power conditions, and thermal limits depend on the manufacturer configuration and test conditions. The digital input architecture makes the amplifier suitable for systems in which a host processor or digital audio codec supplies I2S-compatible data. Designers can centralize mixing, source selection, volume control, and tone processing in software, while the TAS5710PHP converts the digital stream into a bridge-tied Class-D speaker drive. The closed-loop topology is intended to improve output behavior by using feedback to correct the delivered bridge-tied voltage. Typical uses include powered speakers, soundbars, compact stereo systems, wireless speakers, displays, and consumer audio products with digital audio sources. The 48-pin HTQFP package offers many connections for power, ground, digital audio, configuration, feedback, and output stages, but the complete exposed-pad land pattern and thermal-management requirements must be followed exactly. Layout is as important as the logical signal path. Place the decoupling capacitors close to their associated supply pins, provide a low-impedance ground return for the power stage, and route the sensitive digital, clock, and feedback connections away from switching-node currents. The exposed thermal pad must be connected to the ground plane with adequate copper and vias; otherwise the 20 W class can create a substantial thermal burden even though the amplifier is electrically efficient. This page consolidates the verified manufacturer and distributor information, distinguishes documented capabilities from unspecified parameters, and provides application and design guidance that should be checked against the complete manufacturer datasheet before schematic capture or PCB release.

RFQ Liên hệ
TAS5711PHP - 20W Stereo Class-D Amplifier | Texas Instruments (Tape & Reel)
TAS5711PHP

TAS5711PHP - 20W Stereo Class-D Amplifier | Texas Instruments (Tape & Reel)

The Texas Instruments TAS5711PHP is a 20 W digital-input, open-loop Class-D audio power amplifier for stereo bridge-tied speakers, with 8 V to 26 V PVDD operation, 2.1-channel support, equalization, dynamic range control, and a 48-pin HTQFP package measuring 7 mm by 7 mm. Its digital signal path supports up to two discrete audio channels, while its integrated processing is designed for use with digital audio processors and MPEG decoders. A Class-D audio amplifier is a switching power amplifier that uses efficient transistor output stages to drive speakers through LC filter networks. It belongs to the broader class of audio amplifiers, power amplifiers, and analog and mixed-signal semiconductors. Compared with a linear amplifier, the TAS5711 family is intended to reduce power dissipation while delivering high output power for portable consumer-audio equipment, soundbars, compact televisions, and other embedded audio systems. The verified manufacturer data identifies the TAS5711 as a 20 W stereo amplifier operating from an 8 V to 26 V supply and reaching up to 90% efficiency. It provides digital audio input, programmable channel routing, AD and BD filter-mode support, EQ, DRC, and 2.1 mode. The verified datasheet search result also lists SNR of 106 dB, A-weighted, and describes bridge-tied-load operation for stereo speakers. The device accepts a wide range of input data and data rates through its serial digital interface. This makes the signal path suitable for systems where audio is already processed by a digital audio codec, decoder, application processor, or MPEG source. The internal programmable path can route two discrete channels and supports audio processing functions without requiring a separate analog preamplifier for those functions. Typical uses include stereo speaker drive, compact 2.1 speaker systems, consumer-audio equipment, soundbar amplification, and embedded audio products requiring efficient digital power amplification. The supplied PVDD range provides design flexibility for battery-powered and external-amplifier architectures, although actual speaker output depends on supply voltage, load impedance, thermal conditions, and filter design. Designers should follow the manufacturer datasheet for the exact pin functions, exposed-pad connection, LC filter values, thermal layout, digital interface timing, and power-supply decoupling. Because the part is a Class-D output stage, speaker outputs require the specified external filtering network. PCB placement should keep the power-loop area small, provide adequate copper for thermal dissipation, and route sensitive digital signals away from output switching nodes. This product record consolidates the verified manufacturer description, distributor identification, package information, and practical replacement-search results. It is intended to support design review, sourcing, and datasheet discovery; verify the current datasheet and part-status notices before committing a production design.

RFQ Liên hệ
TAS5711PHPR - 20W Stereo Class-D Amplifier | Texas Instruments
TAS5711PHPR

TAS5711PHPR - 20W Stereo Class-D Amplifier | Texas Instruments

The Texas Instruments TAS5711PHPR is a 20 W digital-input, open-loop Class-D audio power amplifier for stereo bridge-tied speakers, with 8 V to 26 V PVDD operation, 2.1-channel support, equalization, dynamic range control, and a 48-pin HTQFP package measuring 7 mm by 7 mm. Its digital signal path supports up to two discrete audio channels, while its integrated processing is designed for use with digital audio processors and MPEG decoders. A Class-D audio amplifier is a switching power amplifier that uses efficient transistor output stages to drive speakers through LC filter networks. It belongs to the broader class of audio amplifiers, power amplifiers, and analog and mixed-signal semiconductors. Compared with a linear amplifier, the TAS5711 family is intended to reduce power dissipation while delivering high output power for portable consumer-audio equipment, soundbars, compact televisions, and other embedded audio systems. The verified manufacturer data identifies the TAS5711 as a 20 W stereo amplifier operating from an 8 V to 26 V supply and reaching up to 90% efficiency. It provides digital audio input, programmable channel routing, AD and BD filter-mode support, EQ, DRC, and 2.1 mode. The verified datasheet search result also lists SNR of 106 dB, A-weighted, and describes bridge-tied-load operation for stereo speakers. The device accepts a wide range of input data and data rates through its serial digital interface. This makes the signal path suitable for systems where audio is already processed by a digital audio codec, decoder, application processor, or MPEG source. The internal programmable path can route two discrete channels and supports audio processing functions without requiring a separate analog preamplifier for those functions. Typical uses include stereo speaker drive, compact 2.1 speaker systems, consumer-audio equipment, soundbar amplification, and embedded audio products requiring efficient digital power amplification. The supplied PVDD range provides design flexibility for battery-powered and external-amplifier architectures, although actual speaker output depends on supply voltage, load impedance, thermal conditions, and filter design. Designers should follow the manufacturer datasheet for the exact pin functions, exposed-pad connection, LC filter values, thermal layout, digital interface timing, and power-supply decoupling. Because the part is a Class-D output stage, speaker outputs require the specified external filtering network. PCB placement should keep the power-loop area small, provide adequate copper for thermal dissipation, and route sensitive digital signals away from output switching nodes. This product record consolidates the verified manufacturer description, distributor identification, package information, and practical replacement-search results. It is intended to support design review, sourcing, and datasheet discovery; verify the current datasheet and part-status notices before committing a production design.

RFQ Liên hệ
TAS5713PHP - 25W Stereo Class-D Amplifier | TI
TAS5713PHP

TAS5713PHP - 25W Stereo Class-D Amplifier | TI

The Texas Instruments TAS5713PHP is a 25 W stereo digital-input Class-D audio amplifier with equalization and dynamic range control, housed in a 48-HTQFP package measuring 7 mm by 7 mm. It accepts an 8 V to 26 V supply and processes up to two discrete audio channels through one serial data input. The device is designed to drive stereo bridge-tied speakers from digital audio processors and MPEG decoders. A Class-D audio amplifier is a switching power amplifier that efficiently converts digital audio signals into differential speaker outputs. Within the semiconductor hierarchy, it belongs to the amplifier IC family, the audio amplifier IC subcategory, and the broader power-management and signal-processing ecosystem. The TAS5713PHP combines digital signal processing, speaker drive, and integrated audio features in one package. The principal specifications include 25 W output capability, two-channel stereo operation, an 8 V to 26 V supply range, digital input, integrated equalization, and dynamic range control. Its 48-pin HTQFP package supports compact PCB integration while providing separate connections for power, ground, digital audio data, clock signals, and differential speaker outputs. The exact output-power conditions and thermal limits must be confirmed from the manufacturer datasheet. Internally, the TAS5713PHP uses a serial digital-audio input and a programmable data path to route two channels into the stereo output stage. Equalization and dynamic range control are integrated into the signal-processing chain, reducing the need for separate software or hardware blocks in many audio systems. Its Class-D output architecture is intended for efficient bridge-tied speaker drive rather than conventional analog power-amplifier output stages. Typical uses include compact stereo speakers, soundbars, display audio systems, set-top equipment, portable audio products, and other consumer electronics that accept digital audio data. A digital audio interface or processor can feed the serial input, while the two Class-D outputs connect to left and right speakers. System-level thermal design remains important because the available 25 W rating depends on supply voltage, load conditions, and PCB copper. The primary design consideration is to preserve clean power and signal paths around the amplifier. Short output connections, adequate input and output decoupling, stable supply routing, and thermal copper help maintain audio performance. Speaker impedance and power limits must be taken directly from the manufacturer documentation rather than inferred from the headline 25 W rating. This product data combines the verified 25 W stereo Class-D configuration, 8 V to 26 V supply range, 48-HTQFP package, digital processing features, distributor pricing, availability information, and practical integration guidance. It also distinguishes verified facts from parameters that still require direct confirmation in the manufacturer datasheet.

RFQ Liên hệ
TAS5715PHP - 25W Stereo Class-D Audio Amplifier | Texas Instruments
TAS5715PHP

TAS5715PHP - 25W Stereo Class-D Audio Amplifier | Texas Instruments

Texas Instruments TAS5715PHP is a 25 W stereo Class-D digital audio power amplifier with an 8 V to 26 V PVDD range, digital input, integrated speaker EQ, dynamic range control, high-pass filtering, and headphone PWM outputs in a 48-pin HTQFP (PHP) package measuring 7 mm by 7 mm. A Class-D audio power amplifier is an efficient switching power stage that drives stereo bridge-tied speakers using digital input data. Within the broader semiconductor hierarchy, the TAS5715PHP is a digital-input audio power amplifier, a member of the Class-D amplifier family, and an audio amplifier IC used in professional and consumer audio power-management systems. Its 48-pin surface-mount HTQFP package supports dense integration on audio amplifier boards. The verified product information specifies 25 W output into an 8 ohm load from an 18 V supply, together with support for 50 W operation in parallel bridge-tie load, or PBTL, mode with a 4 ohm load. The device accepts digital audio data for up to two discrete channels, allowing a digital audio processor or MPEG decoder to feed the stereo output stages without separate analog-to-digital conversion. The TAS5715 combines speaker signal processing with power amplification. Integrated features include equalization, dynamic range control, high-pass filtering, and DC protection. Headphone PWM outputs add a second use case beyond loudspeaker drive, while efficient Class-D operation reduces the heat normally associated with linear audio output stages. The open-loop architecture provides digital control of the audio signal path rather than relying only on conventional analog feedback. Typical applications include powered stereo speakers, compact consumer audio systems, multimedia equipment, sound bars, and digital-audio source products. Its serial digital input works naturally with digital audio processors and MPEG decoders, while the 25 W stereo rating targets conventional 8 ohm speaker loads. The 50 W PBTL capability provides additional flexibility for suitable 4 ohm loads when the amplifier, thermal design, and board layout support that operating mode. Power-supply and thermal layout are critical because Class-D output current and switching losses produce heat in the HTQFP package. The exposed-pad area and surrounding PCB copper must be designed for effective heat transfer, and speaker outputs must not be connected to ground or chassis. Input routing, power ground separation, and output-filter selection also require careful layout to preserve audio performance and suppress unwanted switching artifacts. This product page consolidates verified manufacturer and distributor information, structured drop-in alternatives, parameter comparisons, and practical design guidance. It distinguishes sourced specifications from unavailable detailed electrical data, helping engineers locate the official datasheet, evaluate replacement options, and plan a robust digital Class-D audio-amplifier implementation.

RFQ Liên hệ
TAS5715PHPR - 25W Stereo Class-D Audio Amplifier | Texas Instruments (Tape & Reel)
TAS5715PHPR

TAS5715PHPR - 25W Stereo Class-D Audio Amplifier | Texas Instruments (Tape & Reel)

Texas Instruments TAS5715PHPR is a 25 W stereo Class-D digital audio power amplifier with an 8 V to 26 V PVDD range, digital input, integrated speaker EQ, dynamic range control, high-pass filtering, and headphone PWM outputs in a 48-pin HTQFP (PHP) package measuring 7 mm by 7 mm. A Class-D audio power amplifier is an efficient switching power stage that drives stereo bridge-tied speakers using digital input data. Within the broader semiconductor hierarchy, the TAS5715PHPR is a digital-input audio power amplifier, a member of the Class-D amplifier family, and an audio amplifier IC used in professional and consumer audio power-management systems. Its 48-pin surface-mount HTQFP package supports dense integration on audio amplifier boards. The verified product information specifies 25 W output into an 8 ohm load from an 18 V supply, together with support for 50 W operation in parallel bridge-tie load, or PBTL, mode with a 4 ohm load. The device accepts digital audio data for up to two discrete channels, allowing a digital audio processor or MPEG decoder to feed the stereo output stages without separate analog-to-digital conversion. The TAS5715 combines speaker signal processing with power amplification. Integrated features include equalization, dynamic range control, high-pass filtering, and DC protection. Headphone PWM outputs add a second use case beyond loudspeaker drive, while efficient Class-D operation reduces the heat normally associated with linear audio output stages. The open-loop architecture provides digital control of the audio signal path rather than relying only on conventional analog feedback. Typical applications include powered stereo speakers, compact consumer audio systems, multimedia equipment, sound bars, and digital-audio source products. Its serial digital input works naturally with digital audio processors and MPEG decoders, while the 25 W stereo rating targets conventional 8 ohm speaker loads. The 50 W PBTL capability provides additional flexibility for suitable 4 ohm loads when the amplifier, thermal design, and board layout support that operating mode. Power-supply and thermal layout are critical because Class-D output current and switching losses produce heat in the HTQFP package. The exposed-pad area and surrounding PCB copper must be designed for effective heat transfer, and speaker outputs must not be connected to ground or chassis. Input routing, power ground separation, and output-filter selection also require careful layout to preserve audio performance and suppress unwanted switching artifacts. This product page consolidates verified manufacturer and distributor information, structured drop-in alternatives, parameter comparisons, and practical design guidance. It distinguishes sourced specifications from unavailable detailed electrical data, helping engineers locate the official datasheet, evaluate replacement options, and plan a robust digital Class-D audio-amplifier implementation.

RFQ Liên hệ
TAS5716PAP - 20W Stereo Class-D Audio Amplifier | Texas Instruments
TAS5716PAP

TAS5716PAP - 20W Stereo Class-D Audio Amplifier | Texas Instruments

Texas Instruments TAS5716PAP is a 20 W stereo digital-input Class-D audio power amplifier with speaker EQ, dynamic range control, and bass boost, housed in a 64-pin HTQFP (PAP) package measuring 10 mm by 10 mm. It operates from a 10 V to 26 V supply and supports stereo bridged-tied speaker output. A Class-D audio amplifier is a switching power amplifier whose output stage operates between conductive and nonconductive states instead of continuously biasing a conventional linear output transistor. In the electronic-component hierarchy, the TAS5716PAP belongs to the Class-D amplifier family, which is part of audio amplifiers, amplifier ICs, and power-management semiconductors. Its digital architecture reduces output-stage dissipation compared with a linear amplifier of comparable output power. The TAS5716PAP combines two serial-data inputs with digital signal processing capabilities. According to the Texas Instruments product page, the amplifier includes speaker EQ, DRC, and bass boost, allowing system designers to shape playback characteristics without implementing all of that processing in an upstream audio codec or digital signal processor. The verified data also identifies support for up to four discrete audio channels, making the device suitable for multi-zone or multi-speaker arrangements when the host processor supplies suitable digital audio streams. The device delivers up to 20 W stereo output from a 10 V to 26 V supply. Its 64-pin HTQFP package provides separate connections for digital audio, control, power, ground, and output-stage functions. The verified component listing identifies an 8 Ω maximum load resistance, and a comparison source reports a maximum power dissipation of 2890 mW. These values should be verified against the complete manufacturer datasheet for the selected speaker impedance, supply voltage, channel configuration, and output-power operating condition. Typical uses include television and display audio, compact stereo speaker systems, wireless speakers, headphones, microphones, and other consumer audio products. The digital input is particularly useful where an I2S-compatible audio processor can supply standard-rate serial audio and system control. Stereo operation can use bridged-tied outputs, while the capability to process discrete channels supports more flexible multi-speaker implementations. A critical design consideration is Class-D output filtering and PCB layout. The switching outputs require a correctly designed low-pass filter before the speaker connection, while the power-supply network must handle high-frequency ripple current. Designers should also confirm channel population, thermal margin, speaker impedance, and the supported digital audio format before releasing production hardware. This page consolidates the verified manufacturer and distributor information into an engineer-oriented comparison, application guide, pricing-data availability note, and design checklist. It also clearly identifies where complete pin, electrical, compliance, and alternative-part data must be obtained from the manufacturer datasheet rather than inferred from search snippets.

RFQ Liên hệ