Sản phẩm (39.000+)

USB2513BT-I/M2 - 3-Port USB 2.0 Hub Controller | Microchip
USB2513BT-I/M2

USB2513BT-I/M2 - 3-Port USB 2.0 Hub Controller | Microchip

The Microchip Technology USB2513BT-I/M2 is a 3-port USB 2.0 high-speed hub controller operating from a 3.3 V supply in a 36-SQFN package measuring 6 mm by 6 mm. It supports low-speed, full-speed, and high-speed USB devices through MultiTRAK technology and is designed for compact consumer and mobile equipment. A USB hub controller is a semiconductor that manages one upstream USB connection and multiple downstream ports. USB 2.0 hub controllers combine USB bus-interface logic, port power management, current protection, and device enumeration functions. They sit between a host controller and external peripherals, making them part of the wider USB interface and power-management ecosystem. The controller provides three downstream USB ports, USB 2.0 Hi-Speed operation, and a 3.3 V operating supply. According to the Microchip product information, the USB2513B family supports mixed-speed USB environments while maintaining efficient power use. Battery-charging support, port power-switch control, an internal regulator, ESD protection, and overcurrent protection are also listed for the device. The USB2513BT-I/M2 uses Microchip MultiTRAK technology to manage traffic across low-, full-, and high-speed devices connected to the same hub. This mixed-speed support is important for systems that must remain compatible with legacy peripherals while also supporting USB 2.0 high-speed devices. Its 36-SQFN package supports compact PCB placement in consumer, mobile, and embedded USB equipment. Typical applications include USB expansion in laptops, tablets, docking products, set-top equipment, printers, and compact embedded systems. It is particularly suitable when a platform needs more USB connectivity than its system controller provides and when downstream ports require coordinated power switching and current protection. PCB implementation should preserve the USB high-speed layout required by the manufacturer, including a continuous reference plane, controlled impedance routing, short differential pairs, and placement of support components near the appropriate pins. Port protection and power-switch selection must also be checked against the downstream current requirements of the final device. This page combines manufacturer feature information, drop-in replacement guidance, application-specific engineering guidance, and a parameter comparison to support faster component selection and PCB design planning.

RFQ Liên hệ
USB2513BT/M2 - USB 2.0 3-Port Hub | Microchip
USB2513BT/M2

USB2513BT/M2 - USB 2.0 3-Port Hub | Microchip

Microchip Technology USB2513BT/M2 is a three-port USB 2.0 hi-speed hub controller operating at 3.3 V in a 36-pin SQFN package with an exposed pad. The controller supports Low-Speed, Full-Speed, and High-Speed USB devices and is packaged for tape-and-reel production. Its primary role is to expand one USB host connection into three downstream ports while maintaining USB 2.0 hub functionality and mixed-speed device support. A USB hub controller is an interface IC within the broader semiconductor hierarchy of USB interface controllers, interface ICs, and connectivity semiconductors. It coordinates traffic between a single upstream USB port and multiple downstream ports, handles device attachment and speed detection, and provides the electrical signaling required for USB connections. The USB2513B family is positioned for cost-sensitive consumer, mobile, and embedded systems requiring more than one USB peripheral connection. The verified product information identifies USB 2.0 Hi-Speed operation, three downstream ports, a 3.3 V operating supply, a 36-pin 6 mm by 6 mm SQFN package with exposed pad, and tape-and-reel packaging. Microchip describes the USB2513B as a versatile, cost-effective, and power-efficient hub controller suited to consumer and mobile applications. The available distributor listings also identify individual or ganged downstream-port power control, integrated USB termination, integrated pull-up and pull-down resistors, and full power management as family-level capabilities. The device uses Microchip MultiTRAK technology, which is designed to provide reliable data throughput in mixed-speed USB environments. Mixed-speed support matters because USB 2.0 hubs can connect peripherals operating at 12 Mbit/s Low-Speed, 1.5 Mbit/s Full-Speed, or 480 Mbit/s High-Speed. Integrated termination and bias resistors can reduce the number of external discrete components, while configurable port-power behavior helps system designers manage downstream-current requirements. Typical uses include consumer peripherals, mobile docking equipment, embedded systems, and compact USB port expanders. A system requiring three USB 2.0 ports can place the controller downstream of a host controller and connect keyboards, mice, storage, or other compatible peripherals. Automotive, industrial, medical, and communications equipment may also use USB for service, configuration, data-transfer, or peripheral connectivity where USB 2.0 compatibility is sufficient. The exposed-pad package requires careful PCB layout to transfer heat away from the device. The recommended design should follow the manufacturer's land pattern and recommended circuitry, provide adequate input and output decoupling, keep high-speed USB traces short and impedance-controlled, and plan a continuous ground reference. USB connector current requirements, downstream-power budgets, and any inrush behavior should be checked against the complete system power-supply design. This product page consolidates verified manufacturer and distributor information, current sourcing data, package details, and drop-in replacement evidence that is not presented as one unified datasheet summary. It also distinguishes confirmed USB2513B-family drop-ins from broader functional alternatives so engineers can focus first on parts with the strongest evidence of package and terminal compatibility.

RFQ Liên hệ
USB2513I-AEZG - USB 2.0 3-Port Hub Controller | Microchip
USB2513I-AEZG

USB2513I-AEZG - USB 2.0 3-Port Hub Controller | Microchip

The Microchip Technology USB2513I-AEZG is a USB 2.0 high-speed three-port hub controller designed for embedded USB systems, with a 3.3 V operating supply and a 36-pin QFN exposed-pad package. It supports low-speed, full-speed, and high-speed downstream devices and uses Multi-Transaction Translator technology for embedded hub implementations. A USB hub controller is an interface IC that expands one upstream USB connection into multiple downstream ports. It belongs to the USB interface controller hierarchy, where USB interface ICs connect host controllers, peripherals, and external devices to the universal serial bus. The USB2513I-AEZG provides the hub-control function needed when an embedded system must expose more USB connections than the host controller offers directly. Key characteristics include USB 2.0 operation, three downstream hub ports, a 3 V to 3.6 V supply range, serial EEPROM configuration support, and a 36-QFN exposed-pad package. The exposed thermal pad supports heat transfer from the controller to the PCB copper, which is important in compact embedded equipment where continuous hub traffic can increase device dissipation. The controller uses Multi-Transaction Translator technology to support multiple transaction types through the embedded USB hub implementation. A serial EEPROM interface allows configuration parameters to be loaded for hub operation. The architecture is intended for systems requiring multiple external USB connections without using a full external host controller at every downstream port. Typical applications include industrial HMIs, point-of-sale terminals, medical-device interfaces, printers, set-top equipment, test systems, and embedded instrumentation. The three-port topology is useful where peripherals such as a keyboard, mouse, storage device, or service interface must share one host USB connection. Product-specific electrical limits, transceiver details, and port-configuration options should be confirmed against the manufacturer datasheet. For PCB implementation, use the exposed pad as a thermal and electrical connection according to the package land pattern, provide the specified input and output decoupling, and route the USB differential pairs as controlled-impedance nets. Confirm EEPROM, crystal, port-routing, and power-distribution requirements in the reference design before layout release. This page combines the confirmed USB 2.0, three-port, 3.3 V, and 36-QFN characteristics with package-aware alternatives and practical integration guidance. It is designed to help engineers identify the correct hub controller and plan the associated PCB, configuration, thermal, and signal-integrity work.

RFQ Liên hệ
USB2514-AEZG - 4-Port USB 2.0 Hub Controller | Microchip
USB2514-AEZG

USB2514-AEZG - 4-Port USB 2.0 Hub Controller | Microchip

The Microchip Technology USB2514-AEZG is a USB 2.0 high-speed four-port hub controller with a 3.3 V operating voltage, MultiTRAK transaction-translator technology, and a 36-pin QFN exposed-pad package measuring 6 x 6 mm. It is designed to add four downstream USB connections to an embedded USB host or device while supporting mixed-speed USB 2.0 environments. The controller provides configurable port mapping, port swapping, and PHYBoost features according to the published comparison data. A USB hub controller is an interface IC that manages traffic between one upstream USB port and multiple downstream ports. Within the product hierarchy, a USB hub controller is a USB interface controller, interface IC, and semiconductor. Unlike a simple passive USB hub, this configurable controller actively coordinates transactions, helps devices share an upstream link, and can be adapted to different product architectures through firmware and hardware configuration. The USB2514-AEZG uses MultiTRAK technology to support data throughput in mixed-speed USB systems. Its four downstream ports make it appropriate for embedded hubs, docking stations, printers, industrial equipment, and compact peripheral systems. The 3.3 V operating requirement supports integration into conventional 3.3 V embedded designs, while the 36-QFN exposed-pad package supports compact, high-density PCB layouts. Configurable functions listed for this device family include PortMap, PortSwap, and PHYBoost. PortMap changes how logical ports relate to physical USB connectors, PortSwap reverses the logical order of downstream ports, and PHYBoost adjusts USB transceiver drive strength. These features can simplify product configuration, improve connector usability, or help address signal-integrity requirements without changing the external hub architecture. The USB2514-AEZG is positioned for OEM and industrial embedded USB solutions where four downstream ports are required. Typical implementations include USB connection panels, embedded host adapters, test equipment, and peripheral systems that expose several USB Type-A connectors. Firmware, descriptor configuration, power planning, and connector data-path validation remain important parts of a successful implementation. For PCB design, place the exposed pad and decoupling network according to the manufacturer datasheet, provide adequate VBUS power for all attached downstream loads, and route USB differential pairs as controlled-impedance traces. Signal-quality testing should cover simultaneous high-speed traffic, hot-plug behavior, and transitions between full-speed and low-speed devices. This product summary combines verified distributor and manufacturer information with same-package replacement guidance and practical integration considerations. It is intended to help engineers evaluate USB2514-AEZG for embedded four-port USB hub designs without assuming unverified electrical, pricing, or lifecycle details.

RFQ Liên hệ
USB2514-AEZG-TR - 4-Port USB 2.0 Hub Controller | Microchip (Tape & Reel)
USB2514-AEZG-TR

USB2514-AEZG-TR - 4-Port USB 2.0 Hub Controller | Microchip (Tape & Reel)

The Microchip Technology USB2514-AEZG-TR is a USB 2.0 high-speed four-port hub controller with a 3.3 V operating voltage, MultiTRAK transaction-translator technology, and a 36-pin QFN exposed-pad package measuring 6 x 6 mm. It is designed to add four downstream USB connections to an embedded USB host or device while supporting mixed-speed USB 2.0 environments. The controller provides configurable port mapping, port swapping, and PHYBoost features according to the published comparison data. A USB hub controller is an interface IC that manages traffic between one upstream USB port and multiple downstream ports. Within the product hierarchy, a USB hub controller is a USB interface controller, interface IC, and semiconductor. Unlike a simple passive USB hub, this configurable controller actively coordinates transactions, helps devices share an upstream link, and can be adapted to different product architectures through firmware and hardware configuration. The USB2514-AEZG-TR uses MultiTRAK technology to support data throughput in mixed-speed USB systems. Its four downstream ports make it appropriate for embedded hubs, docking stations, printers, industrial equipment, and compact peripheral systems. The 3.3 V operating requirement supports integration into conventional 3.3 V embedded designs, while the 36-QFN exposed-pad package supports compact, high-density PCB layouts. Configurable functions listed for this device family include PortMap, PortSwap, and PHYBoost. PortMap changes how logical ports relate to physical USB connectors, PortSwap reverses the logical order of downstream ports, and PHYBoost adjusts USB transceiver drive strength. These features can simplify product configuration, improve connector usability, or help address signal-integrity requirements without changing the external hub architecture. The USB2514-AEZG-TR is positioned for OEM and industrial embedded USB solutions where four downstream ports are required. Typical implementations include USB connection panels, embedded host adapters, test equipment, and peripheral systems that expose several USB Type-A connectors. Firmware, descriptor configuration, power planning, and connector data-path validation remain important parts of a successful implementation. For PCB design, place the exposed pad and decoupling network according to the manufacturer datasheet, provide adequate VBUS power for all attached downstream loads, and route USB differential pairs as controlled-impedance traces. Signal-quality testing should cover simultaneous high-speed traffic, hot-plug behavior, and transitions between full-speed and low-speed devices. This product summary combines verified distributor and manufacturer information with same-package replacement guidance and practical integration considerations. It is intended to help engineers evaluate USB2514-AEZG-TR for embedded four-port USB hub designs without assuming unverified electrical, pricing, or lifecycle details.

RFQ Liên hệ
USB2514-HZH USB 2.0 Four-Port Hub Controller | Microchip
USB2514-HZH

USB2514-HZH USB 2.0 Four-Port Hub Controller | Microchip

The Microchip Technology USB2514-HZH is a USB 2.0 high-speed four-port hub controller with four downstream ports, supplied in a 48-pin QFN package with exposed pad. The verified product information identifies it as an OEM-configurable, low-power hub controller using MTT technology and designed for embedded USB solutions. Its four downstream ports allow one upstream USB connection to fan out to multiple peripherals, while USB 2.0 compliance supports high-speed and mixed-speed USB environments. A USB hub controller is an interface integrated circuit that manages traffic between an upstream host or root hub and multiple downstream USB devices. It belongs to the broader hierarchy of USB interface ICs, USB connectivity controllers, embedded interface semiconductors, and interface ICs. The USB2514-HZH is intended for OEM designs where hub behavior, port configuration, firmware support, and system integration determine whether the controller is suitable for a product. The verified data specifically describes the USB2514-HZH as a USB 2.0 high-speed four-port hub controller with four downstream ports. It is also described as low power and OEM configurable. The MTT architecture provides the product context for mixed-speed USB operation, while the USB 2.0 specification provides the compatibility framework for connected devices. These features make the device relevant to embedded USB hubs, docking stations, industrial peripherals, and other systems requiring multiport USB expansion. The package information is reported as a 48-pin QFN exposed-pad package, with one distributor result identifying the package as 48-VFQFN and another as QFN-48-EP. The exposed pad is relevant to PCB layout and thermal management, but the supplied data does not provide a verified pin-by-pin diagram or pin names. Therefore, engineers should obtain the current Microchip datasheet before assigning signals or designing a footprint. Typical design work involves connecting the upstream USB interface, four downstream USB ports, required support components, and the appropriate power architecture. USB signal routing requires careful impedance-controlled layout, short differential traces, controlled return paths, and separation from noisy power and switching nodes. Hub designs must also account for enumeration, current budget, downstream port power management, firmware support, and product-specific descriptors. This page consolidates verified distributor listings, the Microchip product-page reference, package observations, and application guidance. It does not invent electrical limits, pricing tiers, pin assignments, or lifecycle claims that were not present in the supplied web data. For purchasing, use the listed distributor links and confirm current stock, price, and date with the supplier before placing an order.

RFQ Liên hệ
USB2514B-AEZC - 4-Port USB 2.0 Hi-Speed Hub Controller | Microchip
USB2514B-AEZC

USB2514B-AEZC - 4-Port USB 2.0 Hi-Speed Hub Controller | Microchip

The Microchip Technology USB2514B-AEZC is a 4-port USB 2.0 Hi-Speed hub controller housed in a 36-pin QFN (6x6 mm) package with exposed pad. It operates from a 3.0V to 3.6V single supply, supports Low/Full/Hi-Speed USB signaling (480 Mbps), and integrates Microchip's MultiTRAK™ technology for industry-leading throughput in mixed-speed USB environments. The device provides four downstream ports with per-port battery-charging detection and is well suited for consumer, mobile, and embedded computing platforms. What is a USB hub controller? A USB hub controller is an interface IC that expands a single upstream USB port into multiple downstream ports, handling the USB protocol, transaction translation, and port power management. It belongs to the broader family of interface ICs (USB controllers → interface ICs → digital ICs → semiconductors) and sits between the host controller and end devices, isolating traffic per port and enumerating attached peripherals. Key features include USB 2.0 Hi-Speed compliance, integrated 1.5 kΩ upstream pull-up, automatic Hi-Speed termination, port-status indicators, ganged or individual port power switching, and optional battery charging support on downstream VBUS. The internal architecture pairs a serial interface engine (SIE), hub repeater, and transaction translator, allowing full- and low-speed devices to operate behind a Hi-Speed hub without throughput penalty. The USB2514B-AEZC also exposes I2C/SMBus configuration, GPIO for LED indicators, and PRTPWR power-control outputs per port. Its compact 36-QFN footprint and low standby current make it a common choice for space-constrained designs such as docking stations, monitors, automotive head units, and embedded motherboards. Typical applications include USB port expansion on docking stations, automotive infotainment hubs, monitors with built-in USB, all-in-one PCs, set-top boxes, and embedded industrial PCs. The 4-port density matches the most common desktop-peripheral expansion scenarios without external port-multiplier silicon. When designing with this part, observe the datasheet's recommended decoupling (1 µF + 0.1 µF near VBAT and VDD33) and provide a stable 3.3V rail. The exposed thermal pad must be soldered to a grounded copper pour to meet the QFN-36 thermal performance spec. PRTPWR drive strength is limited; pair with an external power switch (such as Microchip's MIC2026) for VBUS control. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Liên hệ
USB2514B-AEZC-TR - 4-Port USB 2.0 Hi-Speed Hub Controller | Microchip (Tape & Reel)
USB2514B-AEZC-TR

USB2514B-AEZC-TR - 4-Port USB 2.0 Hi-Speed Hub Controller | Microchip (Tape & Reel)

The Microchip Technology USB2514B-AEZC-TR is a 4-port USB 2.0 Hi-Speed hub controller housed in a 36-pin QFN (6x6 mm) package with exposed pad. It operates from a 3.0V to 3.6V single supply, supports Low/Full/Hi-Speed USB signaling (480 Mbps), and integrates Microchip's MultiTRAK™ technology for industry-leading throughput in mixed-speed USB environments. The device provides four downstream ports with per-port battery-charging detection and is well suited for consumer, mobile, and embedded computing platforms. What is a USB hub controller? A USB hub controller is an interface IC that expands a single upstream USB port into multiple downstream ports, handling the USB protocol, transaction translation, and port power management. It belongs to the broader family of interface ICs (USB controllers → interface ICs → digital ICs → semiconductors) and sits between the host controller and end devices, isolating traffic per port and enumerating attached peripherals. Key features include USB 2.0 Hi-Speed compliance, integrated 1.5 kΩ upstream pull-up, automatic Hi-Speed termination, port-status indicators, ganged or individual port power switching, and optional battery charging support on downstream VBUS. The internal architecture pairs a serial interface engine (SIE), hub repeater, and transaction translator, allowing full- and low-speed devices to operate behind a Hi-Speed hub without throughput penalty. The USB2514B-AEZC-TR also exposes I2C/SMBus configuration, GPIO for LED indicators, and PRTPWR power-control outputs per port. Its compact 36-QFN footprint and low standby current make it a common choice for space-constrained designs such as docking stations, monitors, automotive head units, and embedded motherboards. Typical applications include USB port expansion on docking stations, automotive infotainment hubs, monitors with built-in USB, all-in-one PCs, set-top boxes, and embedded industrial PCs. The 4-port density matches the most common desktop-peripheral expansion scenarios without external port-multiplier silicon. When designing with this part, observe the datasheet's recommended decoupling (1 µF + 0.1 µF near VBAT and VDD33) and provide a stable 3.3V rail. The exposed thermal pad must be soldered to a grounded copper pour to meet the QFN-36 thermal performance spec. PRTPWR drive strength is limited; pair with an external power switch (such as Microchip's MIC2026) for VBUS control. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Liên hệ
USB2514B-AEZG - 4-Port USB 2.0 Hub Controller | Microchip
USB2514B-AEZG

USB2514B-AEZG - 4-Port USB 2.0 Hub Controller | Microchip

The Microchip Technology USB2514B-AEZG is a 4-port USB 2.0 high-speed hub controller operating from a 3.3 V supply in a 36-pin QFN package with a 6 x 6 mm body. It is designed to expand a single USB host connection into four downstream USB ports for compact embedded, consumer, and mobile equipment. A USB hub controller is a bus-interface semiconductor that manages traffic between one upstream USB port and multiple downstream ports. USB 2.0 high-speed operation supports data transfer at rates up to 480 Mb/s, while a configurable USB 2.0 hub architecture accommodates mixed-speed devices. The USB2514B family also provides I2C configuration, allowing implementation-specific hub parameters to be controlled through a host-accessible interface. The controller is positioned as a low-power, cost-effective solution for applications requiring several USB connections without implementing a full host controller. Its four-port configuration reduces the need for multiple discrete USB switching components and simplifies enclosure design. The 36-QFN package supports compact PCB layouts, although careful escape routing is required for high-speed USB signals. Microchip identifies the USB2514B as a configurable Multi-Transaction Translator hub controller for embedded USB solutions. Mixed-speed support is important when a hub connects USB 2.0 high-speed, full-speed, and low-speed peripherals to a single host. Configuration through I2C allows firmware or an embedded controller to set device behavior according to product requirements. Typical uses include USB docking stations, consumer peripherals, mobile accessories, industrial control panels, and embedded systems that need multiple downstream USB ports. The part can also support USB-to-wireless adapters, data-transfer accessories, and compact multi-port charging or connectivity products when the complete design satisfies USB power and signal-integrity requirements. Designers should follow the manufacturer reference schematic and pin-description table for the 36-QFN footprint, including the exposed-pad connection. Place the input and output decoupling capacitors close to their supply pins, route USB differential pairs as controlled-impedance pairs, and minimize branch stubs on high-speed signals. This page combines manufacturer product information, verified package details, practical PCB guidance, and same-package replacement analysis to support component selection and design review without duplicating the complete manufacturer datasheet.

RFQ Liên hệ
USB2514B-AEZG-TR - 4-Port USB 2.0 HS Hub Controller | Microchip
USB2514B-AEZG-TR

USB2514B-AEZG-TR - 4-Port USB 2.0 HS Hub Controller | Microchip

The Microchip Technology USB2514B-AEZG-TR is a 4-port USB 2.0 high-speed hub controller built on Microchip's MultiTRAK technology, housed in a 36-pin QFN package measuring 6 x 6 mm on a 0.50 mm pitch. It operates from a single 3.3 V supply, runs from 0 to 70 degrees C in the standard commercial grade, and is RoHS compliant. A USB hub controller is the silicon that expands one USB port into several downstream ports while arbitrating traffic between them. In the USB hierarchy, a hub controller sits between a USB 2.0 host and downstream USB 2.0 peripherals: a USB 2.0 host controller manages the root port, a hub controller adds tiered fan-out, and each downstream device negotiates its own speed. The USB2514B family adds an I2C management interface so a system processor can read hub status registers and configure device behaviour. Key features of this part include four USB 2.0 downstream ports, one USB 2.0 upstream port, MultiTRAK mixed-speed traffic handling for high-bandwidth and low-bandwidth devices sharing the same hub, and an I2C management interface for host-side configuration. The part has no ROM interface and no SmartHub logic, keeping the BOM small for cost-sensitive consumer and mobile equipment. Technically, MultiTRAK is the key differentiator in this family: it arbitrates traffic so that a single high-bandwidth device does not starve the other ports in a mixed-speed network, which improves aggregate throughput compared with simpler legacy hubs. Because the device is a hub controller rather than a host, the upstream port connects to a host controller or another hub, and downstream ports attach directly to connectors. Typical applications include compact USB 2.0 port expanders in consumer electronics, tablet and docking accessories, mobile charging and data cradles, industrial USB interface expansion, and embedded host systems needing more than the two ports typical of a USB 2.0 host controller. When designing around the USB2514B-AEZG-TR, budget the 3.3 V rail for both hub and downstream port current, route the differential USB pairs as controlled-impedance 90 ohm lines, and confirm the upstream and downstream port overcurrent budget for each attached connector. The QFN-36 land pattern requires a fine-pitch, 0.50 mm footprint fanout that most assembly houses handle as a standard fine-pitch QFN process.

RFQ Liên hệ
USB2514B-I/M2 - 4-Port USB 2.0 Hub Controller | Microchip
USB2514B-I/M2

USB2514B-I/M2 - 4-Port USB 2.0 Hub Controller | Microchip

The Microchip Technology USB2514B-I/M2 is a 4-port USB 2.0 high-speed hub controller designed for consumer and mobile applications, supplied in a 36-pin SQFN package measuring 6 x 6 mm. The device provides a USB interface and hub-controller function for systems that need to expand a single USB host connection into multiple USB ports. Its operating voltage is specified as 3 V to 3.6 V, making it suitable for low-voltage embedded and portable equipment where USB 2.0 connectivity must be consolidated on a compact board. A USB hub controller is an interface integrated circuit that manages USB traffic between one upstream host port and multiple downstream device ports. It belongs to the USB interface controller hierarchy, which sits within interface ICs and system connectivity semiconductors. USB 2.0 high-speed operation supports peripheral expansion for storage, communications, human-interface devices, and other USB equipment, while the integrated hub controller simplifies host-side port management compared with discrete USB switching solutions. The verified product information identifies USB2514B as a cost-effective, power-efficient, four-port USB 2.0 high-speed hub controller. Microchip describes the device as well suited to consumer and mobile applications, where compact package size, low operating voltage, and integrated USB hub functionality are valuable. The supplied ordering code includes the I/M2 package designation, and distributor listings identify the physical package as 36-SQFN, 6 x 6 mm. The USB2514B family is based on Microchip MultiTRAK technology, which is intended to support USB throughput in mixed-speed USB environments. Mixed-speed support is important when a hub connects full-speed and high-speed peripherals, because the controller must coordinate traffic between devices operating at different USB speeds while presenting a controlled upstream connection to the host. Typical uses include compact USB expansion for embedded computers, single-board computers, consumer peripherals, mobile accessories, and industrial control equipment. In an embedded system, the controller can divide an upstream USB port into four downstream connections for keyboards, storage devices, communications modules, or test equipment. In a portable product, the 3 V to 3.6 V operating range can simplify integration with low-voltage system rails, although the final power budget must include downstream-device requirements. Designers should verify the exact pin assignments, crystal or clock requirements, power sequencing, decoupling, and USB signal-routing constraints against the Microchip datasheet before layout. USB differential traces require controlled impedance, short return paths, careful branch routing, and ESD protection appropriate to the connector exposure. The verified data does not include a public pinout, electrical limits beyond the identified supply range and USB speed, or detailed timing values. This product page consolidates the verified manufacturer and distributor information, distinguishes the USB2514B-I/M2 ordering variant from related family members, and provides practical selection guidance for USB hub applications. It also presents verified drop-in comparison candidates where the available cross-reference data supports package and terminal compatibility.

RFQ Liên hệ
USB2514B/M2 - 4-Port USB 2.0 Hub Controller | Microchip
USB2514B/M2

USB2514B/M2 - 4-Port USB 2.0 Hub Controller | Microchip

The Microchip Technology USB2514B/M2 is a 4-port USB 2.0 Hi-Speed hub controller packaged in a 36-SQFN measuring 6 x 6 mm. It is designed to expand one upstream USB connection into four downstream USB ports for embedded consumer, mobile, and compact peripheral systems. The verified product information identifies the device as a low-power, cost-effective controller using Microchip MultiTRAK technology for mixed-speed USB traffic. A USB hub controller is an interface IC that manages transactions between a USB host, an upstream port, and multiple downstream ports. It belongs to the USB interface-controller hierarchy, combines interface logic and USB connectivity, and is used to add device connectivity without requiring four independent host controllers. USB 2.0 Hi-Speed denotes the 480 Mb/s operating mode, while the four-port configuration consolidates peripheral expansion into a single embedded device. The verified data specifically confirms four USB 2.0 Hi-Speed downstream ports, low-power operation, mixed-speed support through MultiTRAK technology, and suitability for consumer and mobile applications. The controller can reduce external USB switch complexity by integrating hub-management functions into one package. The 36-SQFN footprint also supports compact PCB layouts, although exposed-pad thermal management and careful high-speed routing remain essential. In a typical design, the USB2514B/M2 connects between a USB host and four downstream connectors. Each downstream branch requires appropriate USB data routing and power-path design, while the hub itself needs a suitable reference, clock, decoupling, and configuration implementation defined by the manufacturer datasheet. Because the provided data does not state operating voltage, current, clock frequency, or pin names, those values must be confirmed before schematic sign-off. The USB2514B/M2 is appropriate for docking accessories, compact embedded hubs, mobile accessories, printers, storage peripherals, and consumer equipment where four USB ports are required. Compared with the USB2513B-AEZC family member, its defining advantage is the verified four-port configuration rather than three ports; board compatibility should not be assumed solely from that functional similarity. For implementation, preserve the manufacturer-recommended USB differential impedance, minimize stubs and unnecessary vias, and keep sensitive clock and reference routing away from high-current switching nodes. Verify downstream-port current limits, power-switch selection, enumeration behavior, and thermal performance against the final enclosure and accessory load. This page consolidates verified distributor information, manufacturer product positioning, same-package comparison data, and practical integration guidance. It distinguishes confirmed USB2514B/M2 facts from parameters that require the official datasheet, helping engineers identify the correct hub controller without treating incomplete distributor summaries as complete electrical specifications.

RFQ Liên hệ
USB2514BT-I/M2 4-Port USB 2.0 Hub Controller | Microchip
USB2514BT-I/M2

USB2514BT-I/M2 4-Port USB 2.0 Hub Controller | Microchip

The Microchip Technology USB2514BT-I/M2 is a four-port USB 2.0 high-speed hub controller designed for embedded USB systems and supplied in a 36-pin SQFN package measuring 6 x 6 mm. It operates from a 3.3 V supply and supports low-, full-, and high-speed USB devices through the USB251xB controller family’s MultiTRAK transaction-translation architecture. A USB hub controller is a semiconductor that manages one upstream USB connection and multiple downstream ports, allowing peripheral devices to share an embedded host controller. Within the product hierarchy, USB2514BT-I/M2 is a USB interface IC, USB hub controller, and configurable USB 2.0 interface component used in systems requiring four downstream USB connections. The controller provides four downstream ports, USB 2.0 high-speed operation, and a 3.3 V operating supply. Its MultiTRAK architecture is designed to support efficient mixed-speed USB traffic, while low-power characteristics make the device appropriate for embedded equipment where every milliampere and every PCB area matter. The 36-pin SQFN package supports compact, high-density PCB layouts. Temperature, supply-current, transceiver, and configuration details should be confirmed against the Microchip USB2514BT-I/M2 datasheet before release to production. In particular, board designers must preserve the recommended power, ground, crystal or clock, USB data-line, and configuration connections rather than treating the controller as a generic four-port USB switch. The exact electrical limits depend on the selected USB speed and operating mode. Typical uses include USB-to-serial bridges, embedded test equipment, industrial control panels, medical-device peripherals, multifunction printers, external storage enclosures, and compact embedded computing systems. A four-port hub can reduce the need for multiple external sockets while centralizing enumeration and traffic management in one controller. Layout is the primary practical concern. Place USB differential traces as short and impedance-controlled as possible, maintain continuous ground references, and follow the manufacturer’s recommended decoupling and crystal or clock network. Keep noisy power converters and high-current peripherals away from the USB data region to limit EMI and signal-integrity problems. This product page combines the verified manufacturer-family information, exact orderable part identification, package details, compliant sourcing channel, practical design guidance, and a focused review of same-package alternatives. It is intended to help engineers identify the correct USB 2.0 hub controller and validate PCB and firmware requirements before committing a design to production.

RFQ Liên hệ
USB2514BT/M2 - 4-Port USB 2.0 Hub Controller | Microchip
USB2514BT/M2

USB2514BT/M2 - 4-Port USB 2.0 Hub Controller | Microchip

The Microchip Technology USB2514BT/M2 is a four-port USB 2.0 Hi-Speed hub controller packaged in a 36-pin SQFN (6 x 6 mm). It supports a single USB 2.0 host connection and four downstream USB ports, making it a compact interface controller for embedded systems that need to expand a limited USB topology. The device also supports USB 2.0 low-speed and full-speed devices through the hub transaction translator. A USB hub controller is an interface IC that manages traffic between one upstream host and multiple downstream peripherals. It belongs to the USB interface controller category within integrated circuits and operates as part of the broader USB connectivity hierarchy. USB 2.0 Hi-Speed provides a maximum signaling rate of 480 Mb/s, while the integrated transaction translator allows low-speed and full-speed devices to coexist with high-speed traffic. The USB2514BT/M2 is identified as a configurable four-port USB 2.0 hub controller. The BT suffix identifies the device within the USB251xB family, while /M2 denotes the manufacturer's 36-pin SQFN package and tray-style ordering configuration. Its compact 6 x 6 mm surface-mount package is intended for space-constrained embedded equipment where adding a discrete USB hub would be impractical. The controller is suitable for docking stations, monitors, printers, industrial panels, network appliances, and other products requiring multiple USB connections from one host port. Because the host interface and downstream ports are implemented by an external USB transceiver arrangement defined by the manufacturer, the implementation must follow the datasheet's recommended host, downstream-port, crystal, decoupling, and routing guidance. Layout quality is critical in USB applications because differential data pairs require short, continuous, impedance-controlled routing and careful separation from noisy power paths. The supplied web data confirms the controller function, USB version, port count, interface classification, package, and pin count. Detailed electrical limits, clock requirements, transceiver configuration, and pin names must be verified in the manufacturer datasheet before schematic or PCB release.

RFQ Liên hệ
USB2514I-AEZG - 4-Port USB 2.0 Hub Controller | Microchip
USB2514I-AEZG

USB2514I-AEZG - 4-Port USB 2.0 Hub Controller | Microchip

The Microchip Technology USB2514I-AEZG is a four-port USB 2.0 high-speed hub controller packaged in a 36-QFN housing measuring 6 x 6 mm. It supports 480 Mb/s USB high-speed operation, uses a 3.0 V to 3.6 V supply, and is designed for embedded systems that must expand one upstream USB connection into multiple downstream ports. The controller is identified as a member of the USB251x family of low-power, configurable multi-transaction-translator hub controllers. A USB hub controller is a dedicated interface integrated circuit that manages traffic between one USB host and multiple downstream USB devices. In the product hierarchy, a USB 2.0 hub controller is a USB interface controller, a USB interface IC, and ultimately a semiconductor designed for connectivity and power-management functions. Multi-transaction-translator technology allows the hub to schedule overlapping USB transactions, improving throughput when several downstream devices transmit data at the same time. Key attributes include four downstream ports, USB 2.0 high-speed support, a 36-QFN package, and a specified supply range of 3.0 V to 3.6 V. The supply current listed for the device is 130 mA, which must be considered alongside hub-current-advertisement requirements and the power budget of attached downstream loads. Configuration is handled through a serial EEPROM interface, allowing firmware-defined settings to be loaded when the hub is initialized. The USB2514I-AEZG is intended for OEM-configurable embedded USB systems where port count, enumeration behavior, and downstream power management must be defined by the product software. Mixed-speed operation is important in designs that combine high-speed storage, printers, or network adapters with full-speed peripherals such as keyboards, mice, and human-interface devices. The controller separates the upstream link from each downstream port and manages transaction arbitration across those links. Typical uses include USB expansion in industrial control panels, multifunction printers, external storage enclosures, POS terminals, set-top equipment, and test systems. The 6 x 6 mm QFN package also supports compact PCB layouts, although its exposed thermal pad and high-speed differential routing require careful layout planning. USB signal integrity, reference-clock routing, EEPROM access, and port-power switching are the primary implementation concerns. When designing the hub, follow the reference schematic and layout guidance in the manufacturer datasheet. Route the upstream and downstream high-speed pairs as controlled-impedance differential nets, place support components close to their associated pins, and provide a continuous ground reference beneath the exposed pad. Confirm the external EEPROM address and programming sequence before releasing a PCB for production. This page organizes the USB2514I-AEZG technical profile, verified drop-in candidates, application guidance, and practical layout notes in one engineering-focused reference. It is intended to accelerate part selection, schematic review, PCB planning, and sourcing for engineers designing four-port USB 2.0 hub products.

RFQ Liên hệ
USB2514I-HZH - USB 2.0 HS 4-Port Hub Controller | Microchip
USB2514I-HZH

USB2514I-HZH - USB 2.0 HS 4-Port Hub Controller | Microchip

Microchip Technology USB2514I-HZH is a USB 2.0 high-speed four-port hub controller packaged in a 48-pin VQFN with an exposed pad and supplied in a tray. The verified product information identifies it as a low-speed, full-speed, and high-speed hub controller operating from a 3.3 V supply. Its four-port USB interface architecture makes it relevant to systems that need to expand a single host USB connection across several peripherals while retaining USB 2.0 high-speed support. A USB hub controller is an interface integrated circuit within the broader USB interface-controller hierarchy. It manages traffic between an upstream USB host and multiple downstream USB ports, allowing peripheral devices such as keyboards, storage adapters, communications equipment, and human-interface devices to share one host port. A four-port USB 2.0 implementation is especially relevant to embedded systems, industrial control panels, test benches, and compact peripheral systems that require more attachment points than a host controller exposes directly. The verified product data highlights three defining characteristics: USB 2.0 high-speed operation, four downstream hub ports, and a 48-pin VQFN exposed-pad package. The USB2514I-HZH is also identified as an industrial-temperature-rated part. Microchip describes the related USB251xB family as cost-effective and power-efficient while using MultiTRAK technology to support mixed-speed USB data throughput. These features distinguish it from basic four-port repeater devices by placing port management, signaling, and USB connectivity in one dedicated controller. The part operates from 3.3 V and supports low-speed, full-speed, and high-speed USB devices, allowing a mixed-speed peripheral set to share the same hub. That mixed-speed capability is useful when a design includes legacy USB devices alongside high-speed peripherals. The exposed-pad package also provides a defined thermal and electrical land pattern that must be connected according to the manufacturer layout guidance rather than treated as an unused pin. Typical applications include industrial USB expansion, embedded instrumentation, laboratory data-acquisition systems, USB-to-serial equipment, and peripheral hubs for host computers or embedded controllers. In these systems, the hub can consolidate several external functions behind one upstream USB connection while the controller manages enumeration, downstream port behavior, and data traffic. The USB2422-CP-TR and USB2517I-JZX are related USB interface components available through XAIPART for broader design evaluation. Designers should verify the complete pin assignment, electrical limits, crystal or clock requirements, port-current budget, and exposed-pad connection against the manufacturer datasheet before layout release. The verified distributor information confirms a 48-pin VQFN exposed-pad package and tray packaging, but it does not provide the complete pinout, operating-temperature interval, power dissipation, or recommended external-component values. This product record combines verified manufacturer and distributor information with an explicit comparison of available same-package alternatives, commercial pricing, and application guidance. Missing technical values are marked rather than guessed, allowing engineers to distinguish confirmed USB2514I-HZH characteristics from details that still require direct datasheet verification.

RFQ Liên hệ
USB2517-JZX - 7-Port USB 2.0 Hi-Speed Hub Controller | Microchip
USB2517-JZX

USB2517-JZX - 7-Port USB 2.0 Hi-Speed Hub Controller | Microchip

The Microchip USB2517-JZX is a versatile, cost-effective, and power-efficient 7-port USB 2.0 Hi-Speed hub controller IC in a 64-pin QFN (9x9 mm) package with exposed thermal pad, designed for low-power, small-footprint embedded USB applications. It provides seven downstream USB ports, supports Low-Speed (1.5 Mbps), Full-Speed (12 Mbps), and Hi-Speed (480 Mbps) downstream devices, and operates from a 1.8V/3.3V supply rail. A MultiTRAK™ multi-transaction translator enables concurrent Full-/Low-Speed traffic on multiple downstream ports without bandwidth starvation, and the upstream port supports Hi-Speed operation in accordance with the USB 2.0 specification (April 27, 2000, with 12/7/2000 and 5/28/2002 errata). A USB hub controller is an Interface IC that aggregates multiple USB peripherals behind a single upstream port, presenting each downstream port to the host as an independent device while managing enumeration, power, and transaction translation. Within the broader system hierarchy, the USB2517-JZX sits at Interface IC → USB Controller → USB Hub Controller → USB 2.0 Hi-Speed Hub. Hub controllers are essential building blocks of docking stations, monitors, embedded industrial PCs, and consumer electronics that need to expand a single host USB root port into several usable downstream ports. Key features include per-port or ganged power switching, individual port over-current sensing, integrated 1.5 kΩ upstream pull-up resistor, OTP/serial EEPROM configuration, and support for both bus-powered and self-powered hub topologies. The 64-QFN package with EP provides low thermal resistance and a small 9x9 mm PCB footprint. The device supports SMBus or I²C configuration, complies with USB Battery Charging Specification 1.1 pre-configurations, and integrates an internal 3.3V regulator requiring only a single 3.3V supply or a 5V VBUS-derived rail. The architecture combines a USB 2.0 physical layer (PHY) and a serial interface engine (SIE) per port with a hub repeater and a MultiTRAK transaction translator. This allows multiple Full-/Low-Speed devices to communicate simultaneously with the host at full USB 2.0 bandwidth, eliminating the bandwidth bottleneck found in single-TT hub designs. The hub repeater handles connect/disconnect, suspend/resume, and reset signaling, while per-port PHYs provide signal integrity at 480 Mbps across PCB traces of typical lengths. Typical applications include USB port expansion in monitors, docking stations, industrial PCs, embedded computing, and consumer hubs. It is also used in test equipment, automotive infotainment head units, and any product that must turn one host port into seven USB 2.0 ports. The 1.8V/3.3V flexible supply and small 9x9 mm QFN make it ideal for space-constrained embedded designs. When designing with this part, ensure that the upstream port's 90 Ω differential pair is routed as a length-matched, impedance-controlled USB 2.0 microstrip with a continuous reference ground plane. Place the 480 MHz crystal or oscillator reference as close as possible to the XI pin, and decouple each VDD pin with a 0.1 µF X7R ceramic cap tied to a solid ground pour. A common pitfall is forgetting to populate the upstream series choke or ESD protection array; the hub will enumerate but fail USB-IF compliance without these. This page synthesizes current distributor pricing, same-brand drop-in alternatives from the USB251x family, and practical design notes that go beyond the manufacturer datasheet to help engineers shorten time-to-prototype.

RFQ Liên hệ
USB2517-JZX-TR - 7-Port USB 2.0 Hi-Speed Hub Controller | Microchip (Tape & Reel)
USB2517-JZX-TR

USB2517-JZX-TR - 7-Port USB 2.0 Hi-Speed Hub Controller | Microchip (Tape & Reel)

The Microchip USB2517-JZX-TR is a versatile, cost-effective, and power-efficient 7-port USB 2.0 Hi-Speed hub controller IC in a 64-pin QFN (9x9 mm) package with exposed thermal pad, designed for low-power, small-footprint embedded USB applications. It provides seven downstream USB ports, supports Low-Speed (1.5 Mbps), Full-Speed (12 Mbps), and Hi-Speed (480 Mbps) downstream devices, and operates from a 1.8V/3.3V supply rail. A MultiTRAK™ multi-transaction translator enables concurrent Full-/Low-Speed traffic on multiple downstream ports without bandwidth starvation, and the upstream port supports Hi-Speed operation in accordance with the USB 2.0 specification (April 27, 2000, with 12/7/2000 and 5/28/2002 errata). A USB hub controller is an Interface IC that aggregates multiple USB peripherals behind a single upstream port, presenting each downstream port to the host as an independent device while managing enumeration, power, and transaction translation. Within the broader system hierarchy, the USB2517-JZX-TR sits at Interface IC → USB Controller → USB Hub Controller → USB 2.0 Hi-Speed Hub. Hub controllers are essential building blocks of docking stations, monitors, embedded industrial PCs, and consumer electronics that need to expand a single host USB root port into several usable downstream ports. Key features include per-port or ganged power switching, individual port over-current sensing, integrated 1.5 kΩ upstream pull-up resistor, OTP/serial EEPROM configuration, and support for both bus-powered and self-powered hub topologies. The 64-QFN package with EP provides low thermal resistance and a small 9x9 mm PCB footprint. The device supports SMBus or I²C configuration, complies with USB Battery Charging Specification 1.1 pre-configurations, and integrates an internal 3.3V regulator requiring only a single 3.3V supply or a 5V VBUS-derived rail. The architecture combines a USB 2.0 physical layer (PHY) and a serial interface engine (SIE) per port with a hub repeater and a MultiTRAK transaction translator. This allows multiple Full-/Low-Speed devices to communicate simultaneously with the host at full USB 2.0 bandwidth, eliminating the bandwidth bottleneck found in single-TT hub designs. The hub repeater handles connect/disconnect, suspend/resume, and reset signaling, while per-port PHYs provide signal integrity at 480 Mbps across PCB traces of typical lengths. Typical applications include USB port expansion in monitors, docking stations, industrial PCs, embedded computing, and consumer hubs. It is also used in test equipment, automotive infotainment head units, and any product that must turn one host port into seven USB 2.0 ports. The 1.8V/3.3V flexible supply and small 9x9 mm QFN make it ideal for space-constrained embedded designs. When designing with this part, ensure that the upstream port's 90 Ω differential pair is routed as a length-matched, impedance-controlled USB 2.0 microstrip with a continuous reference ground plane. Place the 480 MHz crystal or oscillator reference as close as possible to the XI pin, and decouple each VDD pin with a 0.1 µF X7R ceramic cap tied to a solid ground pour. A common pitfall is forgetting to populate the upstream series choke or ESD protection array; the hub will enumerate but fail USB-IF compliance without these. This page synthesizes current distributor pricing, same-brand drop-in alternatives from the USB251x family, and practical design notes that go beyond the manufacturer datasheet to help engineers shorten time-to-prototype.

RFQ Liên hệ
USB2517I-JZX - 7-Port USB 2.0 Hub | Microchip (Tape & Reel)
USB2517I-JZX

USB2517I-JZX - 7-Port USB 2.0 Hub | Microchip (Tape & Reel)

The Microchip Technology USB2517I-JZX is a USB 2.0 seven-port hub controller with seven downstream ports, USB 2.0 compliance, and a 64-pin QFN package measuring 9 mm by 9 mm. It is designed for embedded USB systems requiring low-power, configurable hub expansion. The controller supports Low-Speed, Full-Speed, and Hi-Speed downstream devices when operating as a Hi-Speed hub, while its upstream attachment can operate as a Full-Speed or Full-/Hi-Speed hub. A USB hub controller is an interface semiconductor that manages traffic between one upstream USB host and multiple downstream devices. It belongs to the USB interface controller, interface IC, and connectivity semiconductor hierarchy. The USB2517 family uses MultiTRAK technology to support mixed-speed USB environments while helping embedded designs consolidate multiple peripheral connections behind one upstream host interface. The USB2517I is identified in the verified data as the industrial-temperature-rated member of the USB2517 family. Its 64-QFN 9 x 9 mm package supports compact embedded implementations, while the integrated hub function reduces the need for discrete USB routing and control components. The device is described by Microchip as low power and OEM configurable, making it suitable for system-level USB port expansion where firmware, hub configuration, and downstream-port requirements are controlled by the OEM. Typical embedded uses include industrial equipment, test systems, printers, storage appliances, communications equipment, and other products that need more USB connections than a host controller provides directly. Because USB2517I is a hub rather than a host controller, the system still requires an upstream USB host or host-capable controller. The hub’s downstream devices can include low-speed, full-speed, and hi-speed USB peripherals, subject to the operating mode and system configuration. Designers should verify the complete pinout, power requirements, crystal or clock implementation, port-enable behavior, and configuration requirements against the manufacturer datasheet before layout. The 64-QFN package also requires careful exposed-pad thermal and assembly planning. This page combines verified manufacturer, distributor, and datasheet information with practical design context; unsupported electrical details remain marked for data completion rather than inferred.

RFQ Liên hệ
USB2517I-JZX-TR - 7-Port USB 2.0 Hub | Microchip
USB2517I-JZX-TR

USB2517I-JZX-TR - 7-Port USB 2.0 Hub | Microchip

The Microchip Technology USB2517I-JZX-TR is a USB 2.0 seven-port hub controller with seven downstream ports, USB 2.0 compliance, and a 64-pin QFN package measuring 9 mm by 9 mm. It is designed for embedded USB systems requiring low-power, configurable hub expansion. The controller supports Low-Speed, Full-Speed, and Hi-Speed downstream devices when operating as a Hi-Speed hub, while its upstream attachment can operate as a Full-Speed or Full-/Hi-Speed hub. A USB hub controller is an interface semiconductor that manages traffic between one upstream USB host and multiple downstream devices. It belongs to the USB interface controller, interface IC, and connectivity semiconductor hierarchy. The USB2517 family uses MultiTRAK technology to support mixed-speed USB environments while helping embedded designs consolidate multiple peripheral connections behind one upstream host interface. The USB2517I is identified in the verified data as the industrial-temperature-rated member of the USB2517 family. Its 64-QFN 9 x 9 mm package supports compact embedded implementations, while the integrated hub function reduces the need for discrete USB routing and control components. The device is described by Microchip as low power and OEM configurable, making it suitable for system-level USB port expansion where firmware, hub configuration, and downstream-port requirements are controlled by the OEM. Typical embedded uses include industrial equipment, test systems, printers, storage appliances, communications equipment, and other products that need more USB connections than a host controller provides directly. Because USB2517I is a hub rather than a host controller, the system still requires an upstream USB host or host-capable controller. The hub’s downstream devices can include low-speed, full-speed, and hi-speed USB peripherals, subject to the operating mode and system configuration. Designers should verify the complete pinout, power requirements, crystal or clock implementation, port-enable behavior, and configuration requirements against the manufacturer datasheet before layout. The 64-QFN package also requires careful exposed-pad thermal and assembly planning. This page combines verified manufacturer, distributor, and datasheet information with practical design context; unsupported electrical details remain marked for data completion rather than inferred.

RFQ Liên hệ
USB2524-ABZJ - USB 2.0 4-Port Switching Hub | Microchip
USB2524-ABZJ

USB2524-ABZJ - USB 2.0 4-Port Switching Hub | Microchip

The Microchip Technology USB2524-ABZJ is a USB 2.0 multi-switch hub controller with two upstream host connections, four downstream ports, and a 56-QFN-EP surface-mount package measuring 8 mm by 8 mm. Its stated operating supply range is 3.0 V to 3.6 V, while USB 2.0 Hi-Speed operation supports 480 Mbps signaling. The controller provides electronic reconfiguration and reassignment of any downstream port to either upstream host on the fly. A USB hub controller is an interface integrated circuit that coordinates communication between one or more USB hosts and attached peripherals. In the broader hierarchy, USB2524-ABZJ belongs to the USB interface controller family, which sits within interface ICs and broader semiconductor devices. Unlike a conventional four-port hub with only one upstream connection, this device combines a Hi-Speed hub with switching logic so two hosts can share the same downstream device set. The USB2524 is identified by Microchip as the industry's first USB switching hub combining USB Hi-Speed hub and switching functions in one device. Its two upstream ports and four downstream ports enable USB device sharing, dynamic host ownership, and reassignment without physically moving equipment. All required resistors on the USB ports are integrated according to the manufacturer data sheet, reducing discrete termination content on the PCB. Operationally, the controller is intended to work with an external USB power-distribution switch device. That external device controls VBUS switching to downstream ports, limits current, and senses over-current conditions. The separation between data-port switching and power-distribution control allows a board designer to use a suitably rated power switch instead of integrating high-current switching entirely inside the 56-QFN controller. Typical uses include shared test benches, industrial peripheral-sharing systems, embedded equipment with multiple USB hosts, kiosk configurations, and automatic test equipment that needs a peripheral to move between hosts. The 3.0 V to 3.6 V supply range suits conventional 3.3 V digital systems, although the complete board must also meet USB signal-integrity, impedance, VBUS, and current-protection requirements. Layout is the principal implementation constraint for this 56-QFN-EP device. Differential USB data pairs require controlled impedance and minimized mismatch, while the exposed pad needs a deliberate thermal and ground strategy. Designers should also follow the manufacturer's USB layout guidance and confirm external power-switch selection, port-current budgets, EEPROM requirements, and all pin functions against the current USB2524 data sheet. This page consolidates the verified manufacturer and distributor information, distinguishes confirmed electrical facts from unspecified parameters, and provides application, sourcing, and design guidance. It also records the absence of a verified pin-to-pin substitute rather than presenting functionally similar or differently packaged USB controllers as drop-in replacements.

RFQ Liên hệ
USB2533-1080AEN - 3-Port USB 2.0 Hub Controller | Microchip
USB2533-1080AEN

USB2533-1080AEN - 3-Port USB 2.0 Hub Controller | Microchip

The Microchip Technology USB2533-1080AEN is a low-power, OEM-configurable USB 2.0 hub controller with three downstream ports and Multi-Transaction Translator architecture. It supports USB High-Speed operation at 480 Mb/s and is supplied in a 36-terminal SQFN package measuring 6 mm by 6 mm with a 0.50 mm terminal pitch. The controller is designed for embedded systems that need to expand one host USB connection into multiple downstream USB ports. A USB hub controller is a USB interface integrated circuit that manages traffic between one upstream host connection and multiple downstream devices or ports. Unlike a simple power-distribution hub, the USB2533 uses an MTT architecture to maintain separate transaction handling for each downstream port. USB2533 is positioned within the USB interface IC hierarchy as a USB 2.0 hub controller, USB interface controller, and system peripheral for embedded USB connectivity. Key device attributes include three downstream ports, USB 2.0 High-Speed operation, a 36-SQFN surface-mount package, and a low-power CMOS implementation. The USB2533 family is OEM-configurable, allowing the integrator to tailor hub behavior to the target product. It also supports I2C and SMBUS connectivity according to the manufacturer product information, providing a path for configuration, monitoring, or control by an embedded system. The MTT architecture is the principal functional differentiator within the USB2533 family. It allows multiple USB devices connected through different downstream ports to exchange data concurrently rather than being restricted to one shared host transaction stream. This makes the controller appropriate for equipment with several peripheral interfaces, such as a control console with keyboard, mouse, storage, and service interfaces connected simultaneously. Typical deployments include industrial control panels, medical carts, test and measurement systems, set-top equipment, and embedded OEM products that require more than one downstream USB port. Its 480 Mb/s data rate matches USB 2.0 High-Speed peripherals, while the compact 6 mm by 6 mm square package supports space-constrained embedded assemblies. The principal design consideration is power budgeting. Each enabled downstream port must be evaluated for its current requirement, while the controller also consumes operating current from the system supply. Validate the hub-current budget against the load that will actually be connected, because a nominal USB port allowance does not guarantee adequate capability for every combination of downstream devices. This page combines the manufacturer device description with a practical application analysis, engineering design notes, and a parameter-by-parameter comparison against related USB hub controllers. It highlights where the USB2533-1080AEN fits in an embedded USB 2.0 design and where a controller with a different port count should be selected instead.

RFQ Liên hệ
USB2533I-1080AEN - 3-Port USB 2.0 Hub Controller | Microchip
USB2533I-1080AEN

USB2533I-1080AEN - 3-Port USB 2.0 Hub Controller | Microchip

The Microchip Technology USB2533I-1080AEN is an OEM-configurable USB 2.0 Hi-Speed hub controller with three downstream ports, MTT transaction translation, and a 36-pin SQFN package measuring 6 x 6 mm. It operates from a 3.0 V to 3.6 V supply and includes 3.3 V and 1.2 V support, BC1.2 battery-charging protocol support, port-power switching, programmable USB signal drive, an internal regulator, low-power mode, wake-up, and power-on reset. A USB hub controller is a specialized interface IC that manages traffic between one upstream USB host and multiple downstream USB devices. The USB2533 belongs to the multi-transaction translator, or MTT, controller family within the broader USB interface-controller hierarchy. Its MTT architecture allows multiple USB transactions to be handled efficiently while maintaining compatibility with full-speed and Hi-Speed USB 2.0 devices. The controller provides three downstream USB ports for embedded host, peripheral, kiosk, medical, industrial, and consumer equipment. Its internal regulator simplifies power-supply design, while programmable signal drive allows the board designer to tune USB data-signal characteristics for the physical layout. Port-power-switch control provides a defined path for managing downstream-port power, and the low-power mode supports energy-conscious designs. The I suffix identifies the industrial-temperature version, while the -1080AEN ordering code identifies the 36-pin 6 x 6 mm SQFN configuration. The manufacturer describes the USB2533 as fully compliant with the USB 2.0 Specification and USB 2.0 Link Power Management Addendum. It can operate as a full-speed hub or as a full-speed and Hi-Speed hub when connected to a compatible upstream port. Typical embedded applications include multifunction printers, industrial control panels, point-of-sale terminals, set-top equipment, media appliances, and USB peripheral concentrators. Three downstream ports allow several external peripherals to share one host connection, while BC1.2 support is useful in systems that need to distinguish charging-capable ports from standard USB ports. PCB implementation requires careful high-speed USB layout, including controlled impedance differential pairs, short matched routing, continuous return-path planning, and careful separation from switching power circuitry. Decoupling and power-distribution networks should be placed close to the supply pins, while the exposed thermal pad and ground connections must be implemented according to the manufacturer package guidance. This product page combines the manufacturer specifications, package details, practical USB design guidance, sourcing information, and a qualified same-package comparison. It is intended to help engineers assess hub functionality, thermal and layout requirements, and PCB reuse before finalizing an embedded USB design.

RFQ Liên hệ
USB2601-NU-05 - USB 2.0 Hub Controller | Microchip Technology
USB2601-NU-05

USB2601-NU-05 - USB 2.0 Hub Controller | Microchip Technology

The Microchip Technology USB2601-NU-05 is a USB 2.0 high-speed compound interface controller combining a three-port USB hub with a flash media controller, operating from a 3.3 V supply in a 128-lead TQFP package measuring 14 x 14 mm. Its integrated flash controller is permanently assigned to port 1 of the internal USB hub, while the USB 2.0 hub manages upstream and downstream connectivity. A USB hub controller is a specialized interface IC that coordinates data traffic between one upstream host port and multiple downstream peripherals. In the broader semiconductor hierarchy, this USB interface controller belongs to the USB controller family, interface controllers, and power-management and connectivity semiconductor systems. The USB2601 family combines hub and removable-storage functions instead of requiring two unrelated controller ICs. The USB2601-NU-05 supports USB 2.0 high-speed operation and incorporates a flash media controller with FET support. The three downstream USB hub ports make the device useful in compact docks, card readers, printers, media appliances, and embedded systems that need to consolidate external storage and USB peripheral connections. Its 3.3 V operating supply also simplifies integration with contemporary USB host controllers. The 128-TQFP package provides a high pin count for separate USB data, flash-media, power, configuration, and control functions. Surface-mount construction supports automated assembly and compact motherboard layouts. Because the controller contains both high-speed digital interfaces and external media-facing circuitry, board design must preserve controlled impedance routing, solid supply grounding, and short return paths around connector and flash-device connections. Typical applications include multifunction desktop peripherals, USB-connected card readers, portable media docks, embedded data-acquisition equipment, and compact host systems requiring more than one USB port. Integrating the flash controller directly into the hub reduces board-level component count compared with separate hub and storage bridge solutions, provided the selected media interface and supported card formats match the intended product requirements. A key design consideration is the permanent connection of the flash media controller to hub port 1. System architects should therefore treat that port as the dedicated storage path and plan the other two downstream ports for peripherals. Power budgeting, USB enumeration, media-card support, connector data-path routing, and device-capability configuration should be validated together before the PCB is released for production. This product record combines the manufacturer function description, package and supply information, source-linked documentation, application-specific engineering guidance, and a restricted drop-in comparison. It is intended to help engineers identify the correct USB interface controller, distinguish compatible family variants, and plan the surrounding USB and flash-media implementation more efficiently.

RFQ Liên hệ