Vi điều khiển

Sản phẩm (20.000+)

C8051F231R - 25MHz 8KB Flash 32-LQFP MCU | Silicon Labs (Tape & Reel)
C8051F231R

C8051F231R - 25MHz 8KB Flash 32-LQFP MCU | Silicon Labs (Tape & Reel)

The Silicon Labs C8051F231R is a 25 MHz, 8-bit mixed-signal microcontroller with 8 KB of ISP Flash, 256 bytes of RAM, 22 I/O pins, and a 32-LQFP 7 mm × 7 mm package. It operates from a 2.7 V to 3.6 V supply. According to the available datasheet summaries, the device combines an 8051-compatible core with mixed-signal peripherals and on-chip debug support. A microcontroller is a programmable integrated circuit that integrates a CPU core, memory, I/O ports, timers, serial interfaces, and analog or mixed-signal peripherals on one package. Within the semiconductor hierarchy, the C8051F231R belongs to the 8-bit microcontroller and embedded-processing categories. Its 8 KB Flash stores firmware, while its 256-byte RAM supports working variables, stack operations, and short-lived control data. The C8051F231R provides 22 I/O pins, a 25 MHz clock, two comparators with programmable hysteresis, configurable comparator interrupts or reset behavior, a VDD monitor, and a brown-out detector. Its on-chip JTAG debug circuit supports full-speed, non-intrusive in-system debugging without an external emulator, which can shorten firmware bring-up and board validation. These features make it useful where compact mixed-signal control is required. The C8051F231R is positioned for embedded control, sensor acquisition, industrial monitoring, and low-cost peripheral control. Its 2.7 V to 3.6 V operating range suits systems using regulated 3.3 V rails, while the 32-LQFP package provides a conventional surface-mount footprint for PCB assembly. Compared with larger microcontrollers, its 8 KB Flash and 256-byte RAM constrain application size, so firmware budgeting and peripheral sharing are important. For analog signal conditioning, the integrated comparators can monitor thresholds and cooperate with the VDD monitor and brown-out detector. The brown-out detector helps supervise the supply, while the VDD monitor supports power-related detection. Exact threshold, timing, and electrical limits should be confirmed from the manufacturer datasheet before production release. The principal design consideration is resource planning. Allocate Flash and RAM before adding libraries, and avoid assuming that a general-purpose 8051 replacement will preserve firmware timing, startup behavior, or peripheral compatibility. Validate the pin multiplexing, interrupt vectors, clock configuration, debug interface, and mixed-signal routing on the assembled PCB. This product data synthesizes verified distributor listings, package information, memory and clock specifications, and practical design guidance. It is intended as an engineering starting point, not as a substitute for the complete Silicon Labs datasheet, errata, or application-specific validation.

RFQ Liên hệ
C8051F236 - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs
C8051F236

C8051F236 - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F236 is a mixed-signal 8-bit microcontroller with a 25 MIPS C8051 core, 8 kB of Flash memory, 1.25 kB of RAM, three 16-bit timers, and integrated analog peripherals in a 48-pin QFP package. Its combination of digital control and on-chip mixed-signal resources supports compact embedded measurement, control, and communications designs. A microcontroller is an integrated semiconductor containing a processor core, memory, and peripherals such as timers, serial interfaces, analog converters, comparators, and interrupt controls. In the system hierarchy, the C8051F236 belongs to the 8-bit microcontroller class, combines a digital processor with analog functions, and is used as the control and measurement hub of an embedded system. Key features include up to 25 MIPS performance, 8 kB of ISP Flash, 1.25 kB of RAM, three 16-bit timers, two comparators with programmable hysteresis, a VDD monitor with brown-out detection, and on-chip JTAG debug circuitry. The integrated analog and timing resources can reduce the need for external components while simplifying firmware-driven measurement and control. The C8051F236 uses an 8-bit C8051 architecture with an integrated mixed-signal feature set. Its three 16-bit timers support timing, event counting, and periodic control functions. The two comparators can generate interrupts or resets, while the VDD monitor helps supervise the supply. On-chip JTAG debug supports full-speed, non-intrusive in-system debugging without a separate emulator. Typical applications include industrial sensor conditioning, data acquisition modules, small motor and actuator controllers, embedded instrumentation, and low-cost control systems where analog monitoring and precise timing are required. The 48-pin QFP package provides a conventional surface-mount format, although the QFP footprint is generally larger than modern compact packages. When designing a board, preserve the required power, clock, reset, programming, and ground connections according to the manufacturer datasheet. Provide local decoupling near the supply pins and route programming and debug signals away from noisy analog inputs. Verify the exact pin names, voltage limits, and peripheral multiplexing before final PCB release because those details are not included in the supplied web excerpts. This page consolidates verified C8051F236 specifications, distributor references, package information, and design guidance into a compact engineering reference. It also distinguishes verified facts from missing datasheet parameters and avoids presenting unverified alternatives as drop-in replacements.

RFQ Liên hệ
C8051F236R - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs (Tape & Reel)
C8051F236R

C8051F236R - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs (Tape & Reel)

The Silicon Labs C8051F236R is a mixed-signal 8-bit microcontroller with a 25 MIPS C8051 core, 8 kB of Flash memory, 1.25 kB of RAM, three 16-bit timers, and integrated analog peripherals in a 48-pin QFP package. Its combination of digital control and on-chip mixed-signal resources supports compact embedded measurement, control, and communications designs. A microcontroller is an integrated semiconductor containing a processor core, memory, and peripherals such as timers, serial interfaces, analog converters, comparators, and interrupt controls. In the system hierarchy, the C8051F236R belongs to the 8-bit microcontroller class, combines a digital processor with analog functions, and is used as the control and measurement hub of an embedded system. Key features include up to 25 MIPS performance, 8 kB of ISP Flash, 1.25 kB of RAM, three 16-bit timers, two comparators with programmable hysteresis, a VDD monitor with brown-out detection, and on-chip JTAG debug circuitry. The integrated analog and timing resources can reduce the need for external components while simplifying firmware-driven measurement and control. The C8051F236R uses an 8-bit C8051 architecture with an integrated mixed-signal feature set. Its three 16-bit timers support timing, event counting, and periodic control functions. The two comparators can generate interrupts or resets, while the VDD monitor helps supervise the supply. On-chip JTAG debug supports full-speed, non-intrusive in-system debugging without a separate emulator. Typical applications include industrial sensor conditioning, data acquisition modules, small motor and actuator controllers, embedded instrumentation, and low-cost control systems where analog monitoring and precise timing are required. The 48-pin QFP package provides a conventional surface-mount format, although the QFP footprint is generally larger than modern compact packages. When designing a board, preserve the required power, clock, reset, programming, and ground connections according to the manufacturer datasheet. Provide local decoupling near the supply pins and route programming and debug signals away from noisy analog inputs. Verify the exact pin names, voltage limits, and peripheral multiplexing before final PCB release because those details are not included in the supplied web excerpts. This page consolidates verified C8051F236R specifications, distributor references, package information, and design guidance into a compact engineering reference. It also distinguishes verified facts from missing datasheet parameters and avoids presenting unverified alternatives as drop-in replacements.

RFQ Liên hệ
C8051F300 - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs
C8051F300

C8051F300 - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs

Silicon Labs C8051F300 is an 8-bit mixed-signal microcontroller with a 25 MHz 8051 core, 8 kB of Flash memory, 0.25 kB of RAM, an 8-bit ADC, and three 16-bit timers in an 11-QFN package measuring 3 x 3 mm. It also integrates Silicon Labs 2-Wire debug circuitry for non-intrusive, full-speed in-circuit debugging. An 8-bit mixed-signal microcontroller is a compact embedded-processing device that combines a digital CPU with analog measurement functions on one semiconductor die. The C8051F300 belongs to the broader hierarchy of microcontroller, embedded processor, and semiconductor. Its mixed-signal integration allows software to acquire analog inputs and control digital outputs without requiring a separate analog-to-digital converter. The C8051F300's principal features include 25 MHz processing performance, 8 kB of Flash program memory, 0.25 kB of RAM, three 16-bit timers, an 8-bit ADC, and on-chip 2-Wire debugging. The compact 3 x 3 mm QFN11 package supports space-constrained designs while exposing a mixed set of digital I/O and analog-capable resources. Its integrated debug interface also supports memory inspection, register modification, breakpoints, and single-step execution. The device uses the compatible 8051 instruction set and is positioned as a low-cost embedded controller for applications requiring modest computation, periodic sensing, and mixed signal I/O. Silicon Labs' C2 debug architecture allows debugging of the production device installed in the end application. This can simplify firmware validation and reduce the need for separate debug headers or invasive fixture hardware. Typical applications include compact industrial controllers, sensor-conditioning modules, low-cost instrumentation, embedded control panels, and small consumer devices. The 25 MHz clock and three 16-bit timers make it suitable for periodic measurement, timeout management, pulse counting, and basic control loops. The 8-bit ADC supports analog sensing where a dedicated external converter would add cost and board area. Designers should verify the complete pinout, analog limits, power requirements, and programming configuration against the manufacturer datasheet before layout. Because the QFN11 package is compact, exposed-pad grounding, solder-paste control, and careful decoupling are important. Firmware development should use the supported Silicon Labs C2 toolchain and confirm that the selected ordering code matches the intended package and production requirements. This page consolidates verified manufacturer information, distributor availability, pricing evidence, application guidance, and drop-in alternatives derived from the C8051F30x family. It also distinguishes confirmed electrical facts from parameters that require checking in the manufacturer datasheet, helping engineers evaluate the C8051F300 without overlooking footprint, memory, lifecycle, or tooling constraints.

RFQ Liên hệ
C8051F300R - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs (Tape & Reel)
C8051F300R

C8051F300R - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs (Tape & Reel)

Silicon Labs C8051F300R is an 8-bit mixed-signal microcontroller with a 25 MHz 8051 core, 8 kB of Flash memory, 0.25 kB of RAM, an 8-bit ADC, and three 16-bit timers in an 11-QFN package measuring 3 x 3 mm. It also integrates Silicon Labs 2-Wire debug circuitry for non-intrusive, full-speed in-circuit debugging. An 8-bit mixed-signal microcontroller is a compact embedded-processing device that combines a digital CPU with analog measurement functions on one semiconductor die. The C8051F300R belongs to the broader hierarchy of microcontroller, embedded processor, and semiconductor. Its mixed-signal integration allows software to acquire analog inputs and control digital outputs without requiring a separate analog-to-digital converter. The C8051F300R's principal features include 25 MHz processing performance, 8 kB of Flash program memory, 0.25 kB of RAM, three 16-bit timers, an 8-bit ADC, and on-chip 2-Wire debugging. The compact 3 x 3 mm QFN11 package supports space-constrained designs while exposing a mixed set of digital I/O and analog-capable resources. Its integrated debug interface also supports memory inspection, register modification, breakpoints, and single-step execution. The device uses the compatible 8051 instruction set and is positioned as a low-cost embedded controller for applications requiring modest computation, periodic sensing, and mixed signal I/O. Silicon Labs' C2 debug architecture allows debugging of the production device installed in the end application. This can simplify firmware validation and reduce the need for separate debug headers or invasive fixture hardware. Typical applications include compact industrial controllers, sensor-conditioning modules, low-cost instrumentation, embedded control panels, and small consumer devices. The 25 MHz clock and three 16-bit timers make it suitable for periodic measurement, timeout management, pulse counting, and basic control loops. The 8-bit ADC supports analog sensing where a dedicated external converter would add cost and board area. Designers should verify the complete pinout, analog limits, power requirements, and programming configuration against the manufacturer datasheet before layout. Because the QFN11 package is compact, exposed-pad grounding, solder-paste control, and careful decoupling are important. Firmware development should use the supported Silicon Labs C2 toolchain and confirm that the selected ordering code matches the intended package and production requirements. This page consolidates verified manufacturer information, distributor availability, pricing evidence, application guidance, and drop-in alternatives derived from the C8051F30x family. It also distinguishes confirmed electrical facts from parameters that require checking in the manufacturer datasheet, helping engineers evaluate the C8051F300R without overlooking footprint, memory, lifecycle, or tooling constraints.

RFQ Liên hệ
C8051F301 - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs
C8051F301

C8051F301 - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F301 is a mixed-signal, 8-bit 8051 microcontroller operating at up to 25 MHz, with 8 KB of Flash program memory, 256 bytes of RAM, 8 I/O pins, and an 11-QFN 3 mm × 3 mm package. It integrates a 500 ksps 8-bit ADC, programmable amplifier gain, a built-in temperature sensor, internal oscillator, and three 16-bit timers for compact embedded control and measurement systems. An 8051 microcontroller is a CISC-based embedded controller architecture that provides a compact, deterministic platform for reading sensors, controlling outputs, and executing firmware. The C8051F301 belongs to the broader semiconductor hierarchy of microcontroller, mixed-signal MCU, embedded processing IC, and system-on-chip. Its integrated analog peripherals reduce the need for external converters and support space-constrained industrial, instrumentation, and control designs. The principal features include an 8-bit processor core operating at 25 MHz, 8 KB of Flash memory, 256 × 8 bytes of RAM, and eight external I/O pins. The analog subsystem includes an eight-bit ADC capable of 500 ksps conversion, support for eight external inputs, programmable amplifier gains referenced to VREF or VDD, and an integrated temperature sensor. Three 16-bit timers provide timing resources for periodic control, measurement timing, and motor or actuator sequencing. Technically, the C8051F301 combines legacy-compatible 8051 software execution with mixed-signal acquisition in a very small package. Its 500 ksps ADC is suitable for fast-changing analog signals, while the internal oscillator reduces the component count in designs that do not require an external crystal. The 256-byte RAM is modest, so firmware should avoid large buffering and should use Flash efficiently when capturing sampled data. Typical applications include compact industrial controllers, digital measurement instruments, temperature-monitoring nodes, analog sensor interfaces, and embedded motor-control functions. The 3 mm × 3 mm QFN package is especially useful where PCB area is limited, while the exposed pad supports improved heat transfer when required by the selected board construction. Designers should allocate the exposed-pad and ground structure carefully, place decoupling capacitors close to the supply pins, and confirm ADC settling time when sampling rapidly changing inputs. The exact base C8051F301 ordering code must also be selected for the required package and temperature grade rather than assuming that a related suffix is interchangeable. This page consolidates verified manufacturer and distributor information, same-family drop-in candidates, package constraints, pricing references, and practical selection guidance. It also distinguishes the base C8051F301 from suffix-specific orderable parts and identifies unresolved technical data that should be checked against the manufacturer datasheet before release to production.

RFQ Liên hệ
C8051F301R - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs (Tape & Reel)
C8051F301R

C8051F301R - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs (Tape & Reel)

The Silicon Labs C8051F301R is a mixed-signal, 8-bit 8051 microcontroller operating at up to 25 MHz, with 8 KB of Flash program memory, 256 bytes of RAM, 8 I/O pins, and an 11-QFN 3 mm × 3 mm package. It integrates a 500 ksps 8-bit ADC, programmable amplifier gain, a built-in temperature sensor, internal oscillator, and three 16-bit timers for compact embedded control and measurement systems. An 8051 microcontroller is a CISC-based embedded controller architecture that provides a compact, deterministic platform for reading sensors, controlling outputs, and executing firmware. The C8051F301R belongs to the broader semiconductor hierarchy of microcontroller, mixed-signal MCU, embedded processing IC, and system-on-chip. Its integrated analog peripherals reduce the need for external converters and support space-constrained industrial, instrumentation, and control designs. The principal features include an 8-bit processor core operating at 25 MHz, 8 KB of Flash memory, 256 × 8 bytes of RAM, and eight external I/O pins. The analog subsystem includes an eight-bit ADC capable of 500 ksps conversion, support for eight external inputs, programmable amplifier gains referenced to VREF or VDD, and an integrated temperature sensor. Three 16-bit timers provide timing resources for periodic control, measurement timing, and motor or actuator sequencing. Technically, the C8051F301R combines legacy-compatible 8051 software execution with mixed-signal acquisition in a very small package. Its 500 ksps ADC is suitable for fast-changing analog signals, while the internal oscillator reduces the component count in designs that do not require an external crystal. The 256-byte RAM is modest, so firmware should avoid large buffering and should use Flash efficiently when capturing sampled data. Typical applications include compact industrial controllers, digital measurement instruments, temperature-monitoring nodes, analog sensor interfaces, and embedded motor-control functions. The 3 mm × 3 mm QFN package is especially useful where PCB area is limited, while the exposed pad supports improved heat transfer when required by the selected board construction. Designers should allocate the exposed-pad and ground structure carefully, place decoupling capacitors close to the supply pins, and confirm ADC settling time when sampling rapidly changing inputs. The exact base C8051F301R ordering code must also be selected for the required package and temperature grade rather than assuming that a related suffix is interchangeable. This page consolidates verified manufacturer and distributor information, same-family drop-in candidates, package constraints, pricing references, and practical selection guidance. It also distinguishes the base C8051F301R from suffix-specific orderable parts and identifies unresolved technical data that should be checked against the manufacturer datasheet before release to production.

RFQ Liên hệ
C8051F302 - 25MHz 8KB Flash Mixed-Signal MCU | Silicon Labs
C8051F302

C8051F302 - 25MHz 8KB Flash Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F302 is a mixed-signal 8-bit system-on-a-chip microcontroller with a 25 MHz 8051-compatible core, 8 kB of flash memory, 0.25 kB of RAM, and three 16-bit timers in an 11-pin QFN package measuring 3 x 3 mm. The C8051F302-GM configuration provides an exceptionally compact platform for embedded control, analog measurement, and industrial sensing designs. A mixed-signal microcontroller is a semiconductor that combines a digital processing core with analog and timing peripherals on one device. In the product hierarchy, the C8051F302 belongs to the 8-bit microcontroller family, operates as an embedded control IC, and integrates memory, timers, communication interfaces, and mixed-signal resources into a single system-on-a-chip. This integration reduces external component count and simplifies compact control boards. Key verified features include 25 MHz processing performance, 8 kB of flash memory, 0.25 kB of RAM, and three 16-bit timers. The family operates from 2.7 V to 3.6 V across the industrial temperature range of -45°C to +85°C. Port I/O and reset pins tolerate input signals up to 5 V, providing additional interface margin in systems containing 5 V signals. The 11-QFN, 3 x 3 mm package supports space-constrained production designs. The 8051-compatible pipelined core combines familiar 8-bit instruction-set concepts with execution at 25 MHz. Flash memory retains firmware without a separate external memory device, while the on-chip RAM provides working storage for control logic. The three 16-bit timers support periodic timing, input capture, output compare, and other time-dependent functions commonly required by embedded products. The two C2 interface pins can be shared with user functions, allowing in-system debugging without permanently consuming dedicated package pins. Typical uses include compact sensor controllers, industrial measurement modules, digital control boards, and embedded timing systems. A 25 MHz MCU can execute acquisition, filtering, and control tasks while the integrated timers coordinate periodic operations. For designs requiring more flash, RAM, analog resources, or communication peripherals, the C8051F300 through C8051F305 family provides related options that should be selected against a complete peripheral and memory comparison. The principal design consideration is the limited 0.25 kB RAM at 25 MHz. Firmware should use RAM efficiently, avoid unnecessary deep call nesting, and place buffer-heavy operations in external memory or a higher-RAM MCU when required. Board layouts must also preserve access to the shared C2 debug interface and provide compliant decoupling for the 2.7 V to 3.6 V supply. This page consolidates verified manufacturer information, distributor availability, family-level alternatives, package details, and practical design guidance. It is intended to help engineers evaluate the C8051F302 for compact embedded control designs while identifying which specifications require final confirmation from the complete Silicon Labs datasheet.

RFQ Liên hệ
C8051F302R - 25MHz 8KB Flash Mixed-Signal MCU | Silicon Labs (Tape & Reel)
C8051F302R

C8051F302R - 25MHz 8KB Flash Mixed-Signal MCU | Silicon Labs (Tape & Reel)

The Silicon Labs C8051F302R is a mixed-signal 8-bit system-on-a-chip microcontroller with a 25 MHz 8051-compatible core, 8 kB of flash memory, 0.25 kB of RAM, and three 16-bit timers in an 11-pin QFN package measuring 3 x 3 mm. The C8051F302R-GM configuration provides an exceptionally compact platform for embedded control, analog measurement, and industrial sensing designs. A mixed-signal microcontroller is a semiconductor that combines a digital processing core with analog and timing peripherals on one device. In the product hierarchy, the C8051F302R belongs to the 8-bit microcontroller family, operates as an embedded control IC, and integrates memory, timers, communication interfaces, and mixed-signal resources into a single system-on-a-chip. This integration reduces external component count and simplifies compact control boards. Key verified features include 25 MHz processing performance, 8 kB of flash memory, 0.25 kB of RAM, and three 16-bit timers. The family operates from 2.7 V to 3.6 V across the industrial temperature range of -45°C to +85°C. Port I/O and reset pins tolerate input signals up to 5 V, providing additional interface margin in systems containing 5 V signals. The 11-QFN, 3 x 3 mm package supports space-constrained production designs. The 8051-compatible pipelined core combines familiar 8-bit instruction-set concepts with execution at 25 MHz. Flash memory retains firmware without a separate external memory device, while the on-chip RAM provides working storage for control logic. The three 16-bit timers support periodic timing, input capture, output compare, and other time-dependent functions commonly required by embedded products. The two C2 interface pins can be shared with user functions, allowing in-system debugging without permanently consuming dedicated package pins. Typical uses include compact sensor controllers, industrial measurement modules, digital control boards, and embedded timing systems. A 25 MHz MCU can execute acquisition, filtering, and control tasks while the integrated timers coordinate periodic operations. For designs requiring more flash, RAM, analog resources, or communication peripherals, the C8051F300 through C8051F305 family provides related options that should be selected against a complete peripheral and memory comparison. The principal design consideration is the limited 0.25 kB RAM at 25 MHz. Firmware should use RAM efficiently, avoid unnecessary deep call nesting, and place buffer-heavy operations in external memory or a higher-RAM MCU when required. Board layouts must also preserve access to the shared C2 debug interface and provide compliant decoupling for the 2.7 V to 3.6 V supply. This page consolidates verified manufacturer information, distributor availability, family-level alternatives, package details, and practical design guidance. It is intended to help engineers evaluate the C8051F302R for compact embedded control designs while identifying which specifications require final confirmation from the complete Silicon Labs datasheet.

RFQ Liên hệ
C8051F303 - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs
C8051F303

C8051F303 - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F303 is a mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 8 kB of Flash memory, 256 bytes of RAM, and three 16-bit timers in an 11-QFN package measuring 3 x 3 mm. The device combines an 8051-compatible core with mixed-signal peripherals for compact embedded control, sensor acquisition, and low-cost industrial designs. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one die. The C8051F303 belongs to the C8051F30x family of 8-bit flash MCUs and provides an economical platform for embedded control. Its small QFN-11 package supports dense PCB layouts, while the 25 MHz operating frequency provides greater timing headroom than conventional legacy 8051 implementations. The principal device characteristics include 8 kB of Flash program memory, 0.25 kB of RAM, three 16-bit timers, an 8-bit processor architecture, and mixed-signal functionality. The official Silicon Labs product information identifies the C8051F303-GM as an 8051-based device operating at 25 MHz with additional communication interfaces and programmable mixed-signal capabilities. The C8051F30x family combines conventional digital control with analog measurement functions. This integration can reduce the number of external components in systems that require analog inputs, timing, communications, and logic control. Available C8051F30x devices are documented as mixed-signal ISP Flash MCUs, providing an established software and programming ecosystem for embedded product development. Typical uses include industrial sensor controllers, compact data-acquisition modules, communication equipment, consumer accessories, and general embedded-control products. The 25 MHz core and three 16-bit timers are particularly useful when the design must coordinate periodic sampling, communication tasks, and deterministic control functions within a small board area. Designers should verify the exact QFN-11 land pattern, exposed-pad requirements, decoupling, and peripheral multiplexing in the manufacturer documentation before layout. Firmware validation must also confirm the alternate-function assignments of every used pin because the package exposes a limited number of I/O connections. This page combines verified manufacturer and distributor information with engineering-oriented selection guidance, pricing references, and package-level context.

RFQ Liên hệ
C8051F303R - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs (Tape & Reel)
C8051F303R

C8051F303R - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs (Tape & Reel)

The Silicon Labs C8051F303R is a mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 8 kB of Flash memory, 256 bytes of RAM, and three 16-bit timers in an 11-QFN package measuring 3 x 3 mm. The device combines an 8051-compatible core with mixed-signal peripherals for compact embedded control, sensor acquisition, and low-cost industrial designs. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one die. The C8051F303R belongs to the C8051F30x family of 8-bit flash MCUs and provides an economical platform for embedded control. Its small QFN-11 package supports dense PCB layouts, while the 25 MHz operating frequency provides greater timing headroom than conventional legacy 8051 implementations. The principal device characteristics include 8 kB of Flash program memory, 0.25 kB of RAM, three 16-bit timers, an 8-bit processor architecture, and mixed-signal functionality. The official Silicon Labs product information identifies the C8051F303R-GM as an 8051-based device operating at 25 MHz with additional communication interfaces and programmable mixed-signal capabilities. The C8051F30x family combines conventional digital control with analog measurement functions. This integration can reduce the number of external components in systems that require analog inputs, timing, communications, and logic control. Available C8051F30x devices are documented as mixed-signal ISP Flash MCUs, providing an established software and programming ecosystem for embedded product development. Typical uses include industrial sensor controllers, compact data-acquisition modules, communication equipment, consumer accessories, and general embedded-control products. The 25 MHz core and three 16-bit timers are particularly useful when the design must coordinate periodic sampling, communication tasks, and deterministic control functions within a small board area. Designers should verify the exact QFN-11 land pattern, exposed-pad requirements, decoupling, and peripheral multiplexing in the manufacturer documentation before layout. Firmware validation must also confirm the alternate-function assignments of every used pin because the package exposes a limited number of I/O connections. This page combines verified manufacturer and distributor information with engineering-oriented selection guidance, pricing references, and package-level context.

RFQ Liên hệ
C8051F304 - 25MHz Mixed-Signal 8051 MCU | Silicon Labs
C8051F304

C8051F304 - 25MHz Mixed-Signal 8051 MCU | Silicon Labs

The Silicon Labs C8051F304 is a mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 4 kB of Flash memory, 0.25 kB of RAM, and an 11-pin QFN package measuring 3 x 3 mm. It is designed for compact embedded-control systems that need fast CPU performance, mixed-signal conversion, and event-driven timing in a very small footprint. A mixed-signal microcontroller is an embedded semiconductor that combines a digital microcontroller core with analog and timing peripherals. Within the product hierarchy, the C8051F304 belongs to the 8051 mixed-signal MCU family, combining a general-purpose microcontroller with an analog-to-digital converter, comparators, timers, and communication interfaces. This integration allows designers to place sensing, control, and digital processing functions on a single IC. The device operates at 25 MHz and is advertised as delivering 25 MIPS. Its 4 kB Flash memory supports 4K x 8 programmable storage, while its 0.25 kB RAM provides 256 bytes of data memory. The integrated analog subsystem includes an 8-bit ADC capable of 500 ksps, eight external inputs, a comparator, and a built-in temperature sensor. Programmable amplifier gains and selectable references add flexibility for low-level signal acquisition. Three 16-bit timers provide timing, capture, and event-management resources, while the additional communication interfaces expand the range of connected peripherals that can be supported. The 8051 architecture and Silicon Labs peripheral structure make the C8051F304 appropriate for compact control systems that need more analog measurement capability than a basic general-purpose MCU provides. Typical uses include industrial sensor nodes, building-control modules, compact motor-control interfaces, temperature-measurement instruments, and low-power monitoring systems. The 11-pin QFN package is particularly useful where PCB area is constrained. In these designs, the ADC and comparator can perform fast local measurements while the timers support precise periodic control and the digital core handles protocol processing and system logic. Designers should verify the exact package pin assignment, exposed-pad requirements, clock source, and analog-reference arrangement against the manufacturer datasheet before layout. Decoupling should be placed directly beside the supply pins, analog and digital returns should be routed deliberately, and exposed-pad thermal management may be necessary in designs with sustained computational or conversion activity. This product page combines verified manufacturer and distributor information with application guidance, package constraints, and a conservative alternative analysis. It is intended to help engineers determine whether the C8051F304 provides the required Flash, RAM, ADC, timer, package, and supply capabilities without relying on generic microcontroller specifications.

RFQ Liên hệ
C8051F304R - 25MHz Mixed-Signal 8051 MCU | Silicon Labs (Tape & Reel)
C8051F304R

C8051F304R - 25MHz Mixed-Signal 8051 MCU | Silicon Labs (Tape & Reel)

The Silicon Labs C8051F304R is a mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 4 kB of Flash memory, 0.25 kB of RAM, and an 11-pin QFN package measuring 3 x 3 mm. It is designed for compact embedded-control systems that need fast CPU performance, mixed-signal conversion, and event-driven timing in a very small footprint. A mixed-signal microcontroller is an embedded semiconductor that combines a digital microcontroller core with analog and timing peripherals. Within the product hierarchy, the C8051F304R belongs to the 8051 mixed-signal MCU family, combining a general-purpose microcontroller with an analog-to-digital converter, comparators, timers, and communication interfaces. This integration allows designers to place sensing, control, and digital processing functions on a single IC. The device operates at 25 MHz and is advertised as delivering 25 MIPS. Its 4 kB Flash memory supports 4K x 8 programmable storage, while its 0.25 kB RAM provides 256 bytes of data memory. The integrated analog subsystem includes an 8-bit ADC capable of 500 ksps, eight external inputs, a comparator, and a built-in temperature sensor. Programmable amplifier gains and selectable references add flexibility for low-level signal acquisition. Three 16-bit timers provide timing, capture, and event-management resources, while the additional communication interfaces expand the range of connected peripherals that can be supported. The 8051 architecture and Silicon Labs peripheral structure make the C8051F304R appropriate for compact control systems that need more analog measurement capability than a basic general-purpose MCU provides. Typical uses include industrial sensor nodes, building-control modules, compact motor-control interfaces, temperature-measurement instruments, and low-power monitoring systems. The 11-pin QFN package is particularly useful where PCB area is constrained. In these designs, the ADC and comparator can perform fast local measurements while the timers support precise periodic control and the digital core handles protocol processing and system logic. Designers should verify the exact package pin assignment, exposed-pad requirements, clock source, and analog-reference arrangement against the manufacturer datasheet before layout. Decoupling should be placed directly beside the supply pins, analog and digital returns should be routed deliberately, and exposed-pad thermal management may be necessary in designs with sustained computational or conversion activity. This product page combines verified manufacturer and distributor information with application guidance, package constraints, and a conservative alternative analysis. It is intended to help engineers determine whether the C8051F304R provides the required Flash, RAM, ADC, timer, package, and supply capabilities without relying on generic microcontroller specifications.

RFQ Liên hệ
C8051F305 - 8-Bit 25MHz 2KB Flash MCU | Silicon Labs
C8051F305

C8051F305 - 8-Bit 25MHz 2KB Flash MCU | Silicon Labs

Silicon Labs C8051F305 is an 8-bit mixed-signal system-on-chip microcontroller with a 25 MHz, 25 MIPS 8051-compatible core, 2 KB of embedded Flash memory, and 256 bytes of RAM. The device is available in an 11-QFN package measuring 3 x 3 mm, making it suitable for compact embedded control and measurement designs. Its in-system programming capability allows firmware to be programmed or updated without removing the device from the circuit. A microcontroller is a programmable integrated circuit that combines a processor core, program memory, data memory, and peripheral functions on one semiconductor die. The C8051F30x family belongs to the hierarchy 8051-compatible MCU, 8-bit microcontroller, mixed-signal MCU, embedded processor, and integrated circuit. Silicon Labs positions the C8051F305 as a compact device for applications requiring deterministic embedded control in a small PCB footprint. The C8051F305 operates at up to 25 MHz and delivers processing performance of up to 25 MIPS. Its program memory consists of 2 KB of Flash organized for in-system reprogramming in 512-byte sectors. The manufacturer documentation states that no special off-chip programming voltage is required. This combination supports field-programmable firmware while conserving board area compared with larger microcontroller packages. The device includes 256 bytes of RAM according to distributor product listings. Flash-based program memory provides a practical balance between firmware capacity and compact packaging for control-oriented products. Because the verified source data does not enumerate the peripheral set, pin-level functions, analog converter performance, oscillator options, or electrical limits, those specifications must be confirmed against the manufacturer datasheet before a new design is released. Typical uses for the C8051F305 include compact industrial controllers, sensor-conditioning systems, programmable instrument modules, appliance controls, and embedded measurement products. The 11-QFN 3 x 3 mm option is especially useful when board area is constrained. Its 8051-compatible instruction set also allows engineers with established 8051 codebases to evaluate the device without immediately adopting a different software architecture. Design work should begin by verifying the exact package variant, pin multiplexing, decoupling requirements, clock configuration, and programming interface in the C8051F30x documentation. The C8051F305 designation is available in more than one package option, so a PCB cannot be released from the family name alone. The selected orderable suffix must match the land pattern and pin count on the assembly drawing. This page consolidates verified distributor specifications, package distinctions, family-level memory information, sourcing data, and application guidance. It also identifies the limits of the available evidence: detailed electrical characteristics and the complete pinout were not present in the supplied verified records and therefore are not presented as confirmed facts.

RFQ Liên hệ
C8051F305R - 8-Bit 25MHz 2KB Flash MCU | Silicon Labs (Tape & Reel)
C8051F305R

C8051F305R - 8-Bit 25MHz 2KB Flash MCU | Silicon Labs (Tape & Reel)

Silicon Labs C8051F305R is an 8-bit mixed-signal system-on-chip microcontroller with a 25 MHz, 25 MIPS 8051-compatible core, 2 KB of embedded Flash memory, and 256 bytes of RAM. The device is available in an 11-QFN package measuring 3 x 3 mm, making it suitable for compact embedded control and measurement designs. Its in-system programming capability allows firmware to be programmed or updated without removing the device from the circuit. A microcontroller is a programmable integrated circuit that combines a processor core, program memory, data memory, and peripheral functions on one semiconductor die. The C8051F30x family belongs to the hierarchy 8051-compatible MCU, 8-bit microcontroller, mixed-signal MCU, embedded processor, and integrated circuit. Silicon Labs positions the C8051F305R as a compact device for applications requiring deterministic embedded control in a small PCB footprint. The C8051F305R operates at up to 25 MHz and delivers processing performance of up to 25 MIPS. Its program memory consists of 2 KB of Flash organized for in-system reprogramming in 512-byte sectors. The manufacturer documentation states that no special off-chip programming voltage is required. This combination supports field-programmable firmware while conserving board area compared with larger microcontroller packages. The device includes 256 bytes of RAM according to distributor product listings. Flash-based program memory provides a practical balance between firmware capacity and compact packaging for control-oriented products. Because the verified source data does not enumerate the peripheral set, pin-level functions, analog converter performance, oscillator options, or electrical limits, those specifications must be confirmed against the manufacturer datasheet before a new design is released. Typical uses for the C8051F305R include compact industrial controllers, sensor-conditioning systems, programmable instrument modules, appliance controls, and embedded measurement products. The 11-QFN 3 x 3 mm option is especially useful when board area is constrained. Its 8051-compatible instruction set also allows engineers with established 8051 codebases to evaluate the device without immediately adopting a different software architecture. Design work should begin by verifying the exact package variant, pin multiplexing, decoupling requirements, clock configuration, and programming interface in the C8051F30x documentation. The C8051F305R designation is available in more than one package option, so a PCB cannot be released from the family name alone. The selected orderable suffix must match the land pattern and pin count on the assembly drawing. This page consolidates verified distributor specifications, package distinctions, family-level memory information, sourcing data, and application guidance. It also identifies the limits of the available evidence: detailed electrical characteristics and the complete pinout were not present in the supplied verified records and therefore are not presented as confirmed facts.

RFQ Liên hệ
C8051F310 - 25 MIPS 16KB Flash 10-Bit ADC MCU | Silicon Labs
C8051F310

C8051F310 - 25 MIPS 16KB Flash 10-Bit ADC MCU | Silicon Labs

Silicon Labs C8051F310 is a mixed-signal 8-bit microcontroller with a 25 MIPS 8051 core, 16 kB of Flash memory, 1.25 kB of RAM, and a 10-bit ADC, supplied in a 32-pin LQFP package. The C8051F310 combines an 8051-compatible processor core with on-chip mixed-signal peripherals for embedded control, measurement, and communication-oriented designs. Its 200 ksps ADC throughput supports external single-ended or differential input measurements, while the family data sheet describes a 25-channel differential input multiplexer and a 12-bit SAR ADC configuration for related devices. An 8-bit microcontroller is a semiconductor device in the embedded-control hierarchy that integrates a CPU core, memory, timers, serial communication peripherals, and analog or mixed-signal functions into one device. The C8051F31x family is positioned as a small 8051 MCU family for compact embedded systems, with Flash program memory, RAM, ADC capability, and multiple timers. The C8051F310 is therefore suitable where designers need deterministic 8-bit processing without the complexity of a larger application processor. Key verified characteristics include a maximum 25 MHz operating speed, 25 MIPS performance, 16 kB Flash, 1.25 kB RAM, and a 10-bit ADC rated for up to 200 ksps. The family also includes an on-chip power-on reset, VDD monitor, watchdog timer, and clock oscillator according to the product-search information. Four 16-bit timers and additional communication interfaces are identified in the supplied technical description, enabling periodic control, timing, and serial data exchange. The C8051F310 is a mixed-signal MCU, meaning that digital processing and analog measurement functions are integrated on the same device. The ADC can use an external reference or VDD, and the search data also identifies an external conversion-start input and a built-in temperature-sensor option in the C8051F31x family description. These functions support sensor reading, temperature monitoring, industrial control, and embedded measurement systems without requiring a separate ADC in every design. Typical applications include industrial monitoring, building and environmental controls, compact consumer appliances, data acquisition modules, and small motor-control systems. The device is also suitable for educational and prototype platforms, where the 32-pin LQFP package provides accessible peripheral connections and the on-chip development features simplify standalone designs. Designers should verify the exact pin assignments, power requirements, ADC input limits, and oscillator configuration against the manufacturer C8051F31x data sheet before layout. Decoupling capacitors should be placed close to the supply pins, analog and digital returns should be managed carefully, and unused inputs should be configured according to the device guidelines. This product page consolidates the verified manufacturer-family specifications, distributor identification, package information, application guidance, and replacement limitations. It also separates documented parameters from missing data so that engineers can distinguish confirmed C8051F310 characteristics from values that require direct datasheet verification.

RFQ Liên hệ
C8051F310R - 25 MIPS 16KB Flash 10-Bit ADC MCU | Silicon Labs (Tape & Reel)
C8051F310R

C8051F310R - 25 MIPS 16KB Flash 10-Bit ADC MCU | Silicon Labs (Tape & Reel)

Silicon Labs C8051F310R is a mixed-signal 8-bit microcontroller with a 25 MIPS 8051 core, 16 kB of Flash memory, 1.25 kB of RAM, and a 10-bit ADC, supplied in a 32-pin LQFP package. The C8051F310R combines an 8051-compatible processor core with on-chip mixed-signal peripherals for embedded control, measurement, and communication-oriented designs. Its 200 ksps ADC throughput supports external single-ended or differential input measurements, while the family data sheet describes a 25-channel differential input multiplexer and a 12-bit SAR ADC configuration for related devices. An 8-bit microcontroller is a semiconductor device in the embedded-control hierarchy that integrates a CPU core, memory, timers, serial communication peripherals, and analog or mixed-signal functions into one device. The C8051F31x family is positioned as a small 8051 MCU family for compact embedded systems, with Flash program memory, RAM, ADC capability, and multiple timers. The C8051F310R is therefore suitable where designers need deterministic 8-bit processing without the complexity of a larger application processor. Key verified characteristics include a maximum 25 MHz operating speed, 25 MIPS performance, 16 kB Flash, 1.25 kB RAM, and a 10-bit ADC rated for up to 200 ksps. The family also includes an on-chip power-on reset, VDD monitor, watchdog timer, and clock oscillator according to the product-search information. Four 16-bit timers and additional communication interfaces are identified in the supplied technical description, enabling periodic control, timing, and serial data exchange. The C8051F310R is a mixed-signal MCU, meaning that digital processing and analog measurement functions are integrated on the same device. The ADC can use an external reference or VDD, and the search data also identifies an external conversion-start input and a built-in temperature-sensor option in the C8051F31x family description. These functions support sensor reading, temperature monitoring, industrial control, and embedded measurement systems without requiring a separate ADC in every design. Typical applications include industrial monitoring, building and environmental controls, compact consumer appliances, data acquisition modules, and small motor-control systems. The device is also suitable for educational and prototype platforms, where the 32-pin LQFP package provides accessible peripheral connections and the on-chip development features simplify standalone designs. Designers should verify the exact pin assignments, power requirements, ADC input limits, and oscillator configuration against the manufacturer C8051F31x data sheet before layout. Decoupling capacitors should be placed close to the supply pins, analog and digital returns should be managed carefully, and unused inputs should be configured according to the device guidelines. This product page consolidates the verified manufacturer-family specifications, distributor identification, package information, application guidance, and replacement limitations. It also separates documented parameters from missing data so that engineers can distinguish confirmed C8051F310R characteristics from values that require direct datasheet verification.

RFQ Liên hệ
C8051F311 - 25MHz Mixed-Signal MCU with 16KB Flash | Silicon Labs
C8051F311

C8051F311 - 25MHz Mixed-Signal MCU with 16KB Flash | Silicon Labs

The Silicon Labs C8051F311 is a mixed-signal 8-bit microcontroller with a 25 MHz 8051-compatible core, 16 kB of Flash memory, 1.25 kB of RAM, and a 28-pin QFN package measuring 5 mm by 5 mm. Its integrated mixed-signal resources include a 10-bit, 17-channel ADC capable of 200 ksps, two comparators, four 16-bit timers, and multiple communication interfaces. These features make the C8051F311 suitable for compact embedded-control, analog-monitoring, and industrial sensing systems. An 8-bit microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one mixed-signal system-on-chip. The C8051F311 belongs to the 8051-compatible microcontroller family and combines digital control with on-chip analog conversion and comparison functions. Its 25 MHz core supports up to 25 MIPS, while 16 kB of Flash stores firmware and 1.25 kB of RAM supports working data. The principal features are a 10-bit ADC with 17 channels and 200 ksps conversion capability, two on-chip comparators, and four 16-bit timers. The manufacturer product page also identifies on-chip power-on reset and additional communication interfaces. These resources reduce the need for external converters, timers, and interface circuitry in moderately complex embedded systems while keeping the board area compact. Technically, the device integrates a high-speed pipelined 8051-compatible core with mixed-signal peripherals in a 5 mm by 5 mm QFN28 package. The ADC can use an external reference or the device supply according to the verified manufacturer description. Because this is an MCU rather than a power semiconductor, SOA data is not applicable, and thermal design focuses on package power dissipation, copper area, and ambient temperature rather than a Safe Operating Area graph. Typical uses include industrial sensor acquisition, building-control modules, compact instrumentation, digital control panels, and low-cost embedded control products. A firmware-driven ADC task can sample up to 17 channels, while the timers and comparators support thresholding, periodic measurement, motor-related timing, or local alarm functions. The 16 kB Flash limit and 1.25 kB RAM should be checked against the final firmware and buffering requirements. Designers should preserve clean analog grounding, place decoupling capacitors close to the supply pins, and route analog inputs away from fast digital signals. Because the verified material provides only a QFN28 package description and no complete verified pin table, the package outline can be identified without assigning unsupported signal names to individual pins. Firmware should also account for reset behavior and analog-reference accuracy. This product record combines the verified manufacturer specifications, distributor availability information, package details, and procurement data with an explicit review of drop-in alternatives. It also identifies where pin assignments, environmental limits, and comparative peripheral data require confirmation in the manufacturer datasheet before a new design is released.

RFQ Liên hệ
C8051F311R - 25MHz Mixed-Signal MCU with 16KB Flash | Silicon Labs (Tape & Reel)
C8051F311R

C8051F311R - 25MHz Mixed-Signal MCU with 16KB Flash | Silicon Labs (Tape & Reel)

The Silicon Labs C8051F311R is a mixed-signal 8-bit microcontroller with a 25 MHz 8051-compatible core, 16 kB of Flash memory, 1.25 kB of RAM, and a 28-pin QFN package measuring 5 mm by 5 mm. Its integrated mixed-signal resources include a 10-bit, 17-channel ADC capable of 200 ksps, two comparators, four 16-bit timers, and multiple communication interfaces. These features make the C8051F311R suitable for compact embedded-control, analog-monitoring, and industrial sensing systems. An 8-bit microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one mixed-signal system-on-chip. The C8051F311R belongs to the 8051-compatible microcontroller family and combines digital control with on-chip analog conversion and comparison functions. Its 25 MHz core supports up to 25 MIPS, while 16 kB of Flash stores firmware and 1.25 kB of RAM supports working data. The principal features are a 10-bit ADC with 17 channels and 200 ksps conversion capability, two on-chip comparators, and four 16-bit timers. The manufacturer product page also identifies on-chip power-on reset and additional communication interfaces. These resources reduce the need for external converters, timers, and interface circuitry in moderately complex embedded systems while keeping the board area compact. Technically, the device integrates a high-speed pipelined 8051-compatible core with mixed-signal peripherals in a 5 mm by 5 mm QFN28 package. The ADC can use an external reference or the device supply according to the verified manufacturer description. Because this is an MCU rather than a power semiconductor, SOA data is not applicable, and thermal design focuses on package power dissipation, copper area, and ambient temperature rather than a Safe Operating Area graph. Typical uses include industrial sensor acquisition, building-control modules, compact instrumentation, digital control panels, and low-cost embedded control products. A firmware-driven ADC task can sample up to 17 channels, while the timers and comparators support thresholding, periodic measurement, motor-related timing, or local alarm functions. The 16 kB Flash limit and 1.25 kB RAM should be checked against the final firmware and buffering requirements. Designers should preserve clean analog grounding, place decoupling capacitors close to the supply pins, and route analog inputs away from fast digital signals. Because the verified material provides only a QFN28 package description and no complete verified pin table, the package outline can be identified without assigning unsupported signal names to individual pins. Firmware should also account for reset behavior and analog-reference accuracy. This product record combines the verified manufacturer specifications, distributor availability information, package details, and procurement data with an explicit review of drop-in alternatives. It also identifies where pin assignments, environmental limits, and comparative peripheral data require confirmation in the manufacturer datasheet before a new design is released.

RFQ Liên hệ
C8051F312 - 25MHz 8-Bit 8KB Flash MCU | Silicon Labs
C8051F312

C8051F312 - 25MHz 8-Bit 8KB Flash MCU | Silicon Labs

The Silicon Labs C8051F312 is an 8-bit mixed-signal system-on-chip microcontroller operating up to 25 MHz, with 8 KB of flash memory, 1.25 KB of RAM, a 10-bit ADC, four 16-bit timers, and a 32-pin LQFP package measuring 7 mm by 7 mm. It combines a pipelined 8051-compatible core with integrated analog and digital peripherals for compact industrial control designs. An 8051-compatible microcontroller is a compact embedded processor based on the widely established 8051 instruction set. Within the broader semiconductor hierarchy, the C8051F312 belongs to the microcontroller and mixed-signal MCU categories, combining a programmable core, nonvolatile program memory, volatile data memory, timers, serial communications, digital I/O, and analog conversion functions. The Silicon Labs implementation accelerates the core to up to 25 MIPS according to the manufacturer family documentation. Key features include 8 KB of flash program memory, 1.25 KB of RAM, four 16-bit timers, and a 10-bit ADC integrated into the mixed-signal device. The operating supply range is 2.7 V to 3.6 V, while the industrial temperature range extends from -45 °C to +85 °C. The device also provides two C2 interface pins that can be shared with user functions, allowing in-system programming and debugging without consuming dedicated package pins. The C2 interface is a two-wire debug and programming architecture that supports connected debugging and in-system programming. The manufacturer states that port I/O and the reset pin tolerate input signals up to 5 V, which can simplify interfaces to external equipment that uses 5 V logic. This tolerance does not change the device's 2.7 V to 3.6 V supply requirement, so the power rail and signal levels still require careful design review. Typical applications include industrial controllers, compact data-acquisition modules, embedded monitoring equipment, communication nodes, and mixed-signal products that need moderate processing speed without a larger 32-bit MCU. Its four 16-bit timers are useful for periodic timing, input capture, output compare, and basic motor-control functions, while the ADC supports analog sensor and potentiometer monitoring. When designing around the C8051F312, preserve the 2.7 V to 3.6 V supply range, decouple the supply close to the device, and account for the shared C2 pins when allocating connector space or board functions. The 32-pin LQFP footprint also requires a pin-compatible replacement to match both the land pattern and the original firmware assumptions. This page consolidates the verified C8051F312 specifications, family-level alternatives, sourcing information, and engineering guidance. It distinguishes verified device data from unavailable pricing, pin-level, compliance, and lifecycle details so procurement and design decisions can be made without relying on unsupported assumptions.

RFQ Liên hệ
C8051F313 - 25 MHz Mixed-Signal 8051 MCU | Silicon Labs
C8051F313

C8051F313 - 25 MHz Mixed-Signal 8051 MCU | Silicon Labs

The Silicon Labs C8051F313 is a highly integrated mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 8 kB of Flash program memory, and 1.25 kB of RAM in a 5 x 5 mm 28-pin QFN package. It provides 25 GPIO pins, four 16-bit timers, a 10-bit 17-channel ADC sampling at 200 ksps, and two comparators. A mixed-signal microcontroller integrates digital control, analog measurement, and communications in one device. The C8051F313 belongs to the C8051 family of 8-bit MCUs, combining an embedded 8051-compatible processing core with ADC, comparator, timer, and communication peripherals. This hierarchy places it within the broader embedded-control and power-management IC categories used in industrial sensing, instrumentation, and compact control systems. Key features include a 25 MHz pipelined 8051-compatible core, 8 kB of Flash for in-system programming, and 1.25 kB of internal RAM. Its analog subsystem includes a 10-bit ADC with 17 channels and a maximum sampling rate of 200 ksps, plus two comparators for threshold detection and signal conditioning. Four 16-bit timers support timing, waveform generation, and periodic control tasks. The device integrates an in-system, full-speed, non-intrusive debug interface and on-chip power-on reset according to the manufacturer product information. The C8051F31x family is positioned for compact embedded products that need mixed-signal measurement without a separate analog device. Additional communication interfaces are listed by Silicon Labs, but their individual types are not identified in the supplied source data. Typical applications include industrial sensor nodes, analog measurement boards, compact motor and process controllers, communication modules, and test equipment. The 200 ksps ADC supports sampled analog monitoring, while the 17 GPIO and four timers allow peripheral control, timing, and external signal acquisition within one device. A key design consideration is that the exposed-pad QFN footprint requires careful PCB layout and thermal management. Follow the manufacturer's land-pattern and exposed-pad connection guidance, place bypass capacitors close to the supply pins, and verify the required operating and storage voltage limits against the full datasheet before layout release. This page consolidates manufacturer specifications, distributor pricing, pin-package details, and drop-in replacement guidance into one engineering-focused reference. It also identifies the parameter data that remains unavailable in the supplied sources, allowing procurement and design decisions to be traced to verified product information.

RFQ Liên hệ
C8051F314 - 8KB 8051 MCU 25MHz 32-LQFP | Silicon Labs
C8051F314

C8051F314 - 8KB 8051 MCU 25MHz 32-LQFP | Silicon Labs

The Silicon Labs C8051F314 is an 8-bit 8051-compatible mixed-signal microcontroller with a high-speed pipelined 8051 core delivering up to 25 MIPS at 25 MHz, 8 kB of ISP Flash program memory, 1.25 kB of on-chip RAM, and a 32-pin LQFP (7x7 mm) package. Supply voltage ranges from 2.7 V to 3.6 V. A microcontroller (MCU) is a complete computer-on-a-chip combining a processor core, program memory, data memory, and peripherals into a single integrated circuit. The C8051F314 belongs to the 8-bit MCU class, sits within the broader power-management and embedded-control hierarchy of a system, and is a member of Silicon Labs' C8051F31x family of fully integrated mixed-signal System-on-a-Chip (SoC) MCUs. The pipelined CIP-51 architecture executes most instructions in a single clock cycle, so a 25 MHz C8051F314 substantially outperforms a classic 12-clock-per-cycle 8051 running at the same frequency. Key features include the 25 MIPS pipelined 8051-compatible core, 8 kB ISP Flash memory that is in-system programmable, 1.25 kB of internal data RAM, on-chip mixed-signal peripherals, and the C2 debug/programming interface that uses just two pins, conserving I/O in small packages. The C8051F31x family offers 24-, 28-, and 32-pin package options with 8 kB or 16 kB Flash variants, enabling pin-compatible upgrades within the footprint. Architecturally, the CIP-51 core uses a pipelined single-cycle instruction fetch-execute scheme that removes the 12-clock machine-cycle penalty of the original 8051. Flash endurance and ISP capability support field firmware updates. The mixed-signal integration reduces external component count, board area, and bill-of-material cost compared with discrete MCU-plus-peripheral solutions. Typical applications include industrial control and automation nodes, consumer appliance control, sensor interfaces and smart instrumentation, battery-powered portable equipment, and legacy 8051 designs requiring modern in-circuit-debug capability with a small footprint and low pin count. When designing with the C8051F314, budget I/O carefully: pin count is the primary constraint of the 32-LQFP, and the C2 interface shares pins with port functions, so plan the debug connector early in the layout. This page synthesizes verified distributor pricing, drop-in family alternatives, application guidance, and design notes not consolidated in the manufacturer datasheet, providing unique information gain for engineers selecting 8-bit 8051 MCUs.

RFQ Liên hệ
C8051F315 - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs
C8051F315

C8051F315 - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F315 is an 8-bit mixed-signal microcontroller with a 25 MHz 8051 core, 8 kB of Flash program memory, 1.25 kB of RAM, and 25 I/O pins in a 28-QFN 5 x 5 mm package. Its integrated mixed-signal resources include an ADC and two comparators, while four 16-bit timers support timing, PWM, and general control tasks. The MCU also incorporates communication interfaces, a power-on reset, a VDD monitor, and a watchdog timer. An 8-bit microcontroller is a compact embedded-control device whose processor, memory, peripherals, and I/O are integrated on one semiconductor die. The C8051F315 belongs to the C8051F31x family, which combines the established 8051 instruction set with mixed-signal processing and factory-programmable Flash. It is suited to applications where local control, analog measurement, and modest communication requirements matter more than the computational capacity of a 32-bit MCU. The device's 25 MHz operating frequency provides a 25 MIPS-class execution rate according to the published product information. Its 8 kB Flash supports in-system programming, while 1.25 kB of RAM provides working memory for control logic, buffers, and stack operations. Twenty-five I/O pins allow external sensors, actuators, displays, and digital interfaces to be connected without a separate input/output expander. The C8051F315 integrates an analog-to-digital converter and two comparators directly into the MCU. These resources reduce external component count in control systems that compare analog thresholds or acquire sensor data. Four 16-bit timers provide greater timing resolution than basic 8-bit counters, making the device suitable for periodic sampling, pulse measurement, PWM generation, and motor or actuator timing functions. Typical uses include industrial sensor controllers, compact motor-control modules, building automation nodes, power-supply monitoring, LED and lighting controllers, and small embedded instruments. The 5 x 5 mm QFN package supports space-constrained designs, but its exposed-pad construction requires careful PCB layout and adequate thermal copper to dissipate heat reliably. Designers should verify the complete pin multiplex, exposed-pad connection, voltage limits, and peripheral assignments in the manufacturer datasheet before layout. The compact land pattern also demands short analog and digital return paths, local decoupling, and controlled high-impedance analog routing to preserve measurement accuracy. This product page consolidates manufacturer specifications, distributor listings, package information, application guidance, and verified design considerations. It also distinguishes confirmed C8051F31x family data from unknown electrical details rather than estimating values that require datasheet confirmation.

RFQ Liên hệ
C8051F320 - 8-Bit 25MHz USB MCU, 16KB Flash | Silicon Labs
C8051F320

C8051F320 - 8-Bit 25MHz USB MCU, 16KB Flash | Silicon Labs

The Silicon Labs C8051F320 is an 8-bit C8051F32x microcontroller with a 25 MHz clock, 25 MIPS throughput, 16KB of ISP flash memory, and USB connectivity in a 32-LQFP (7x7 mm) package. It combines a high-speed pipelined 8051 core with a 10-bit ADC, two comparators, and on-chip C2 debug. A microcontroller is a programmable integrated circuit containing a processor core, memory, and dedicated peripherals. The C8051F320 belongs to the 8051 family, combining a legacy-compatible instruction set with a high-speed pipeline, USB device connectivity, and mixed-signal peripherals. It is suitable for embedded control systems where USB connectivity and analog measurement are needed in one package. Principal features include 16KB of in-system programmable flash, a 10-bit ADC capable of 200 ksps, up to 17 single-ended or 13 differential external inputs, two comparators, and selectable analog references. The ADC reference can come from an external pin, an internal reference, or VDD. Additional analog features include a built-in temperature sensor and an external conversion-start input. The device uses the Silicon Labs C2 two-wire debug architecture, providing full-speed, non-intrusive debugging in the finished application. Its USB interface supports designs that need direct connectivity to a host computer, while the 8051 core provides broad compatibility with established 8051 software ecosystems and development tools. Typical uses include USB-connected data acquisition, industrial control modules, temperature measurement, battery-operated instrumentation, and compact consumer peripherals. The integrated ADC and comparators reduce the need for external signal-conditioning and conversion components when the measured signals fall within the device's analog input limits. Designers should budget decoupling capacitance at each supply pin, route the USB differential pair as a controlled-impedance connection, and use the C2 interface for production debugging. Before upgrading an existing 8051 design, verify software timing, interrupt priorities, memory usage, and USB enumeration requirements against the manufacturer datasheet. This page consolidates verified distributor availability, family-level technical data, practical application guidance, and same-footprint family comparisons that are not presented together in the manufacturer datasheet.

RFQ Liên hệ