Vi điều khiển

Sản phẩm (20.000+)

PIC18F6722-E/PT - 8-bit PIC MCU, 128KB Flash, 25MHz | Microchip
PIC18F6722-E/PT

PIC18F6722-E/PT - 8-bit PIC MCU, 128KB Flash, 25MHz | Microchip

The Microchip Technology PIC18F6722-E/PT is an 8-bit PIC18 microcontroller featuring 128KB (64K x 16) of enhanced Flash program memory, 3,936 bytes of RAM, and a 64-pin TQFP (10x10 mm) package. It operates at up to 25MHz from a 4.2V to 5.5V supply, targeting large low-power (nanoWatt) and connectivity-rich embedded designs that require multiple serial interfaces and substantial on-chip memory. A microcontroller (MCU) is a single-chip computer containing a CPU, non-volatile program memory, RAM, and multiple peripherals. The PIC18 family uses an enhanced Harvard RISC architecture with 16-bit opcodes and 8-bit data paths, balancing code density, deterministic interrupt response, and ease of programming in C or assembly. Within Microchip's portfolio, the PIC18F series sits between baseline PIC10/12/16 parts and the high-performance PIC24/dsPIC families, providing the most peripheral-rich 8-bit option for human-machine interface, sensing, and small connected-node designs. Key features include four serial ports: two synchronous (I2C and SPI) plus two asynchronous (USART with LIN bus master capability), a 10-bit A/D converter with up to 12 input channels, a 5-bit DAC/comparator, and nanoWatt power management with multiple idle and sleep modes that drop supply current well below typical run-mode levels. The 64-pin TQFP exposes up to 54 digital I/O lines, ample headroom for parallel buses, LCD segment drivers, or matrix keypads. The device integrates 1KB of data EEPROM emulation, a self-programmable Flash controller for bootloader/field updates, and CTMU (Charge Time Measurement Unit) support for capacitive touch sensing. With 128KB of code space, it can host full TCP/IP stacks, USB CDC class drivers, or large GUI assets in resource-constrained industrial and consumer nodes. Typical applications include industrial control panels, HVAC thermostats, large-format display drivers, automotive body and climate modules, and connected sensor hubs that need LIN, SPI, and I2C in parallel. The 'E' suffix denotes the extended (-40C to +125C) operating temperature grade, making the part suitable for outdoor, automotive, and industrial environments. When designing the PCB, place a 100nF decoupling capacitor as close as possible to every VDD/SS pin pair, and provide a bulk 10uF tantalum or ceramic near the supply entry. The PIC18F6722 does not include an internal USB or CAN peripheral; designs needing these should consider the PIC18F67J50 family or jump to PIC24/dsPIC. This page synthesizes distributor stock, drop-in alternatives from the same PIC18F8722 family, and engineering design notes not commonly aggregated on a single datasheet view.

RFQ Liên hệ
PIC18F6722-I/PT - 128KB Flash 8-bit MCU, 64-TQFP | Microchip
PIC18F6722-I/PT

PIC18F6722-I/PT - 128KB Flash 8-bit MCU, 64-TQFP | Microchip

The Microchip PIC18F6722-I/PT is an 8-bit enhanced flash microcontroller with nanoWatt technology, 128KB (64K x 16) of program flash memory, 40 MHz maximum clock speed, and a built-in 10-bit analog-to-digital converter, housed in a 64-pin TQFP (10x10 mm) package. It targets large low-power and connectivity applications that benefit from four serial ports (two MSSP for I2C/SPI and two enhanced USARTs with LIN support) plus 54 digital I/O pins. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path. It integrates a CPU, non-volatile program memory (Flash), volatile data memory (RAM), EEPROM, timers, communication peripherals, and I/O on one die, and it occupies the lowest tier of the embedded compute hierarchy (8-bit MCU -> 16-bit MCU -> 32-bit MCU -> MPU). The PIC18F6722 belongs to the PIC18F8722 family, which is the highest-pin-count branch of the PIC18 enhanced flash family designed for human-machine interface, instrumentation, and connectivity nodes. Key differentiating features of the PIC18F6722-I/PT include 128KB self-programmable flash, 3,936 bytes of RAM, 1KB of EEPROM, a 10-bit ADC with up to 12 channels, two Capture/Compare/PWM modules, two 8-bit timers plus three 16-bit timers, and nanoWatt power management with multiple idle and sleep modes. The device operates from 4.2V to 5.5V across the industrial -40C to +85C range. Hardware multipliers and C-compiler-friendly architecture reduce firmware development time. The PIC18F6722's 64-pin TQFP and 80-pin TQFP variants share the PIC18F8722 family's pinout topology, giving engineers an upgrade path to higher pin counts or larger flash without PCB rework. Compared with smaller PIC18 members, the 6722 combines the deepest RAM in its class with the broadest peripheral mix. Typical applications include industrial control and HMI panels, automotive body and LIN nodes, home appliances with display/keypad interfaces, USB-to-UART gateways, and low-power sensor hubs that need four serial channels simultaneously. The wide supply range and large RAM also suit bootloader-based field-upgradeable products. Designers should budget for an external 10 MHz to 40 MHz crystal or resonator to drive the internal PLL-free oscillator chain, and provide decoupling close to every VDD/VSS pair. The ICD/ICSP pins (PGC/PGD) must remain accessible for in-circuit debugging. Pay attention to the 5V-only I/O when interfacing with 3.3V peripherals - a level translator or resistive divider is required. This page combines distributor stock and pricing as of 2026-09-28, drop-in TQFP-64 alternatives from Microchip's own portfolio, and practical design notes that go beyond the manufacturer datasheet to support faster component selection and second-sourcing.

RFQ Liên hệ
PIC18F6722T-E/PT - 8-Bit 25MHz 128KB Flash MCU 64-TQFP | Microchip
PIC18F6722T-E/PT

PIC18F6722T-E/PT - 8-Bit 25MHz 128KB Flash MCU 64-TQFP | Microchip

The Microchip Technology PIC18F6722T-E/PT is an 8-bit PIC18 enhanced Flash microcontroller running at 25 MHz, integrating 128 KB of program Flash and 3,936 bytes of RAM in a 64-pin 10x10 mm TQFP package. It is part of the PIC18F8722 family, designed for large low-power (nanoWatt) and connectivity-rich applications that benefit from four serial ports (two MSSP modules supporting I2C and SPI, and two enhanced USART modules with LIN capability). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a rich set of peripheral interfaces into one IC. The PIC18 family is Microchip's 8-bit enhanced architecture with a 16-bit instruction word and 8-bit data path, positioned above the baseline PIC16 and below the 16-bit dsPIC/PIC24 families in the 8-/16-bit microcontroller taxonomy (microcontroller -> embedded MCU -> 8-bit MCU -> PIC architecture -> PIC18 enhanced family). Within power management of embedded systems, MCUs replace discrete logic by consolidating timing, glue logic, and communication handling on one programmable device. Key features of the PIC18F6722T-E/PT include 128 KB (64K x 16) of self-programmable Flash program memory, 3,936 bytes of RAM, and 1,024 bytes of data EEPROM. It offers up to 54 digital I/O pins, two MSSP modules (SPI at up to 25 MHz master and I2C Master/Slave), two EUSART modules with LIN support, two CCP and three ECCP modules (PWM with programmable dead time and auto-shutdown), a 10-bit ADC with up to 16 channels, and nanoWatt power management for sleep/Idle modes. The wide 4.2 V to 5.5 V supply range targets industrial and embedded control environments. Architecturally, the PIC18F6722T-E/PT uses an enhanced Harvard architecture with a hardware multiplier, 32-level hardware stack, and 8x8 single-cycle multiplication. The internal Phase-Locked Loop (PLL) and software-selectable oscillator options (HS, XT, LP, RC, EC with PLL) allow flexible clocking from DC up to 40 MHz operation. The 10-bit ADC and dual analog comparators support mixed-signal sensing without external components. Typical applications include industrial control panels, HVAC and white-goods user interfaces, automotive body and LIN-cluster nodes, USB/HID bridges, and graphical LCD or segment-display controllers that need 128 KB code space and four simultaneous serial channels. The combination of PWM-rich peripherals and large RAM makes it equally suited for sensor-hub aggregation. When designing with this part, ensure the 64-pin TQFP land pattern matches the chosen footprint and that decoupling capacitors (100 nF plus 10 uF bulk) are placed within 5 mm of the VDD/VSS pairs. The E suffix denotes the extended (-40C to +125C) operating temperature range, which is required for under-hood or industrial cabinet deployments. This page synthesizes distributor pricing, datasheet specifications, and practical design notes not found in a single manufacturer page, giving engineers and buyers one canonical reference for sourcing the PIC18F6722T-E/PT.

RFQ Liên hệ
PIC18F6722T-I/PT - 8-bit 40MHz 128KB Flash MCU 64-TQFP
PIC18F6722T-I/PT

PIC18F6722T-I/PT - 8-bit 40MHz 128KB Flash MCU 64-TQFP

The Microchip PIC18F6722T-I/PT is an 8-bit PIC18 enhanced flash microcontroller operating at up to 40 MHz, integrating 128 KB (64K x 16) of Flash program memory, 3,936 bytes of RAM and 1,024 bytes of EEPROM in a 64-pin TQFP (10x10 mm) package. Tape-and-reel packaging ("T" suffix) makes it suitable for high-volume surface-mount assembly lines, while the "I" industrial temperature grade supports operation from -40C to +85C. An MCU (microcontroller) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, EEPROM data storage, peripherals and I/O on one silicon die. Within Microchip's taxonomy, the PIC18F family sits between the mid-range PIC16F line and the high-performance dsPIC line, offering an 8-bit data path with 16-bit instructions and nanoWatt power-management modes. The PIC18F6722 belongs to the PIC18F8722 family, optimized for large low-power connectivity applications needing abundant RAM and multiple serial interfaces. Key features of the PIC18F6722T-I/PT include 54 digital I/O pins, four serial ports (two synchronous supporting I2C and SPI, two asynchronous LIN-capable USARTs), a 10-bit ADC with up to 16 channels, nanoWatt technology for power-constrained designs, and supply voltage from 4.2 V to 5.5 V. The 64-pin TQFP package exposes a generous pin budget for graphics, motor, sensor and human-machine-interface front-ends, while 3,936 bytes of RAM enable sizeable communication buffers for stacks like TCP/IP or MODBUS without external memory. Architecturally, the device uses Microchip's enhanced Harvard architecture with a 16-bit instruction word and an 8-bit data path, providing C-friendly operation while retaining deterministic interrupt latency. The nanoWatt feature set includes idle, sleep and deep-sleep modes with on-the-fly oscillator switching - critical for battery or energy-harvesting nodes. Internal ECC-less Flash and self-programmability simplify in-field firmware updates via bootloader or ICSP. Typical applications include industrial sensor hubs with multiple serial sensor buses, building automation controllers using LIN or RS-485, low-power wireless gateways paired with transceivers such as MRF24J40 or RN4020, point-of-sale terminals, and white-goods user interfaces. The wide pin count also suits TFT-display and touch-panel front-ends, with the 10-bit ADC handling analog sensor readout in parallel with digital comms. Design tip: route the ICSP/PGD/PGC pins carefully to keep them accessible for in-circuit programming, and place a 100 nF decoupling capacitor within 5 mm of each VDD/VSS pair; the 64-pin TQFP exposes eight such pairs. This page combines distributor pricing, drop-in compatible alternatives and practical design notes that are not available from the manufacturer datasheet alone.

RFQ Liên hệ
PIC18F6723-E/PT - 128KB Flash 8-bit MCU, 64-TQFP | Microchip
PIC18F6723-E/PT

PIC18F6723-E/PT - 128KB Flash 8-bit MCU, 64-TQFP | Microchip

The Microchip Technology PIC18F6723-E/PT is an 8-bit RISC PIC18 microcontroller with 128KB of Flash program memory, 4KB of SRAM, and 1KB of data EEPROM, packaged in a 64-pin TQFP (10x10 mm). It operates at up to 40 MHz internal clock (25 MHz in the snippet, datasheet max differs by grade) over a 4.2V to 5.5V supply range, and integrates a 12-bit ADC, multiple serial interfaces, and 54 I/O pins in a low-power nanoWatt architecture. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, optimized for deterministic real-time control. The PIC18 family sits in Microchip's mid-range performance tier, above PIC16 and PIC12 in code density, peripheral count and addressing capability, but below the 16-bit dsPIC and 32-bit PIC32 families. PIC MCUs are widely used in industrial, automotive and consumer embedded systems where reliability, predictable interrupt latency and long product life cycles matter more than raw MHz. Key differentiating features of the PIC18F6723 include 128KB self-programmable Flash, 1024 bytes of data EEPROM for non-volatile parameter storage, four 16-bit timer/counters, two Capture/Compare/PWM modules, two Enhanced USARTs, two MSSP peripherals supporting SPI and I2C, and a 12-bit ADC with up to 12 channels. The 'E' suffix denotes the extended industrial temperature grade of -40C to +125C, and the /PT suffix designates the 64-pin TQFP package. Architecturally, the device uses a 16-bit instruction word with an 8-bit data path and a hardware multiplier, providing linear code density and deterministic interrupt response. nanoWatt Technology power management offers multiple idle and sleep modes with wake-up sources, making the part suitable for energy-conscious designs. Typical applications include industrial control panels, automotive body and HVAC subsystems, USB peripherals (with on-chip USB on derivative parts), graphical user interfaces driving LCDs, sensor aggregation nodes, and consumer appliances. The 54 I/O pins and dual serial interfaces suit designs that must bridge multiple sensors and actuators while maintaining low BOM cost. When designing with this part, budget decoupling capacitance at every VDD/VSS pair and follow Microchip's recommended 4-layer layout for the 64-pin TQFP. Ensure the MCLR pin has the proper external reset network and that PGD/PGC traces are short for reliable in-circuit debugging with MPLAB tools. This page synthesizes distributor pricing, drop-in alternatives and practical design notes that go beyond what the manufacturer datasheet alone provides.

RFQ Liên hệ
PIC18F6723T-I/PT - 128KB Flash 8-Bit MCU | Microchip 64-TQFP
PIC18F6723T-I/PT

PIC18F6723T-I/PT - 128KB Flash 8-Bit MCU | Microchip 64-TQFP

The Microchip Technology PIC18F6723T-I/PT is an 8-bit PIC18 microcontroller built on the enhanced RISC architecture, integrating 128KB of Flash program memory, 4KB of SRAM and 1024 bytes of data EEPROM in a 64-pin TQFP (10x10 mm) package. It executes instructions at up to 40 MHz clock speed (10 MIPS), operates from 4.2 V to 5.5 V supply, and exposes 54 digital I/O lines together with a 12-bit ADC, two synchronous (I2C/SPI) and two asynchronous (LIN-capable) serial ports, plus USB 2.0 full-speed and CAN 2.0B peripherals. A microcontroller (MCU) is a single-chip computer that combines a CPU core, non-volatile program memory, volatile data memory and a range of on-chip peripherals such as timers, ADCs and communication interfaces. PIC18 devices belong to the broader 8-bit MCU category (hypernyms: microcontroller -> embedded controller -> semiconductor -> integrated circuit) and sit between simpler PIC16 parts and the 16-bit dsPIC/PIC24 families, balancing code density, peripheral richness and cost for mid-range embedded designs. Key features of this part include 128 KB Flash organized as 64K x 16, an internal 8 MHz oscillator with PLL options, nanoWatt power management with multiple idle/sleep modes, a 10-bit/12-bit ADC with up to 12 channels, and the standard PIC18 instruction set with C-compiler-friendly architecture. The T suffix denotes tape-and-reel packaging; the I suffix indicates the industrial -40C to +85C operating temperature grade. Typical applications are large low-power human-interface panels, USB peripherals, CAN-connected sensor nodes, industrial control with LIN/UART bridges, and consumer appliances requiring a rich mix of analog and digital I/O. For each of these use cases, the combination of 128 KB Flash and four independent serial ports removes the need for external memory or a companion communication chip. When designing with this MCU, allocate the ADC acquisition time carefully when using high-impedance sources, and provide adequate decoupling on AVDD/AVSS to preserve 12-bit conversion linearity. Watch the absolute maximum VDD of 7.5 V during hot-plug events and respect the in-circuit debuggers' pin assignments when laying out the 64-TQFP footprint. This page synthesizes distributor pricing, drop-in alternative listings, and practical design notes not found in the standalone manufacturer datasheet, helping engineers accelerate sourcing, schematic review and PCB layout decisions.

RFQ Liên hệ
PIC18F67J10-I/PT - 8-bit MCU 128KB Flash 64-TQFP | Microchip
PIC18F67J10-I/PT

PIC18F67J10-I/PT - 8-bit MCU 128KB Flash 64-TQFP | Microchip

The Microchip PIC18F67J10-I/PT is a high-performance 8-bit PIC microcontroller delivering up to 40 MHz (10 MIPS) of processing power from 128 KB of Flash program memory and 4 KB of RAM, housed in a 64-pin TQFP (10x10 mm) package. The part belongs to the PIC18F87J10 family of 64/80-pin, nanoWatt-technology flash microcontrollers and is specified for an industrial temperature range of -40C to +85C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and a rich set of peripheral interfaces into one device. The PIC18 family uses an enhanced RISC architecture with 16-bit opcodes and 8-bit data paths; the 'J' sub-family is designed around a 2.5V/3.3V core and offers multiple low-power (nanoWatt) modes for battery-aware designs. MCUs sit beneath the broader hierarchy of microprocessors and embedded processors, occupying the same tier as ARM Cortex-M0/M3 devices in the embedded-system taxonomy. Key features of the PIC18F67J10 include four serial ports (two MSSP for I2C and SPI, plus two enhanced USARTs with LIN support), a 10-bit A/D converter with up to 16 channels, two analog comparators, two CCP modules plus one ECCP, four timers (Timer0/1/2/3), and a 16-bit parallel slave port for external memory expansion. The 54 digital I/O pins can sink/source up to 25 mA, supporting direct LED drive in some topologies. The architecture is built on a flash-based CMOS process with on-chip debugging via ICD and self-programming capability. The 16-bit wide instruction word and 8-bit datapath provide deterministic interrupt latency, while the 31-level hardware stack supports C compilers (MPLAB XC8) and the traditional PIC assembly toolchain. Typical applications include industrial control panels, HVAC and home-automation gateways, automotive LIN slave nodes, USB/connectivity bridges, and human-machine interface (HMI) modules that need many I/Os and a low-power operating mode. Cost-sensitive multi-serial designs (e.g. RS-232 plus RS-485 plus I2C sensor plus SPI display) particularly benefit from the four-port integration. Designers should note that the PIC18F67J10 is a 2.5V/3.3V part (VDDCORE regulated internally); the I/O pins are 5V-tolerant. Always decouple VDD/VSS with 100 nF plus bulk capacitors and place them within 2 mm of the package pins. This page synthesizes distributor pricing, drop-in TQFP-64 alternatives, application notes, and design guidance not aggregated on a single manufacturer or distributor page, with all data sourced from Microchip's product page and authorized distributor listings as of 2026-09-28.

RFQ Liên hệ
PIC18F67J10T-I/PT - 8-Bit 40MHz 128KB Flash MCU | Microchip TQFP-64
PIC18F67J10T-I/PT

PIC18F67J10T-I/PT - 8-Bit 40MHz 128KB Flash MCU | Microchip TQFP-64

The Microchip Technology PIC18F67J10T-I/PT is an 8-bit PIC18J-family RISC microcontroller running up to 40 MHz with 128 KB of Flash program memory and 4 KB of RAM, housed in a 64-pin TQFP (10x10 mm) package. It integrates a 10-bit ADC, two synchronous (I2C/SPI) and two asynchronous (LIN-capable) UART serial ports, plus a 64-pin variant of the PIC18F67J10 family that delivers 54 I/O pins for connectivity-dense designs. The -I suffix denotes the -40C to +85C industrial temperature grade and the /PT suffix denotes the TQFP-64 package, while the trailing T indicates tape-and-reel packaging. Key features include 128 KB Flash (64K x 16), 3936 bytes of RAM, 40 MHz maximum clock with 200 ns instruction cycle (10 MIPS at 40 MHz when using a 4x PLL), 10-bit ADC with up to 11 channels, nanoWatt Technology power management modes, and two comparators. The wide 2.0 V to 3.6 V core VDD range (with 4.2 V to 5.5 V noted in some datasheet rows; the canonical PIC18F67J10 family is 2.0-3.6 V) supports both battery-powered and regulated industrial rails. The 64-pin TQFP footprint is one of the most widely supported packages for the PIC18F family, simplifying layout, hand-rework, and socket compatibility. The PIC18F67J10 architecture uses an enhanced Harvard RISC core with 16-bit-wide instructions and 8-bit-wide data path, providing deterministic timing for interrupt-driven and control-loop applications. The nanoWatt Technology dynamic power management block enables idle, sleep, and run-time switching to optimize current consumption in low-duty-cycle designs. CIP (Core Independent Peripherals) such as the Enhanced USART, MSSP (Master Synchronous Serial Port supporting I2C and SPI), and PWM modules operate without CPU intervention after configuration, freeing the core for application logic. The 40 MHz internal oscillator option further reduces BOM count. Typical applications include industrial control (sensor hubs, PLC expansion modules), automotive body and chassis subsystems (LIN nodes, lighting controllers), consumer appliances (HVAC controls, washing-machine front panels), USB/serial bridging, and embedded HMI. The combination of large Flash, dual serial ports, and 54 I/O lines enables complex protocol stacks and rich user interfaces on a single MCU. When designing with this part, choose the VDD range that matches your supply rail (2.0-3.6 V core VDD), use the on-chip 8 MHz internal oscillator for BOM-cost savings, and verify the pinout against the 64-pin TQFP diagram in the PIC18F67J10 family datasheet before PCB layout. This page synthesizes distributor pricing, drop-in 64-pin TQFP alternatives from the PIC18 family, and practical design notes not found in the manufacturer datasheet.

RFQ Liên hệ
PIC18F67J11-I/PT - 8-Bit 48MHz 128KB Flash MCU | Microchip TQFP-64
PIC18F67J11-I/PT

PIC18F67J11-I/PT - 8-Bit 48MHz 128KB Flash MCU | Microchip TQFP-64

The Microchip Technology PIC18F67J11-I/PT is an 8-bit PIC® 18J family microcontroller running at 48 MHz (10 MIPS) with 128 KB of Flash program memory (64K x 16) and 3,936 bytes of RAM, packaged in a 64-pin TQFP (10x10 mm) industrial-grade (-40C to +85C) form factor. It integrates an internal 8 MHz oscillator, 51 digital I/O lines, and supports 1.8V, 2.5V, and 3.3V supply rails, making it suitable for AEC-Q100-style automotive and battery-powered designs that need wide voltage tolerance. Background: A PIC18 microcontroller is a Harvard-architecture 8-bit RISC MCU from Microchip's PIC18 family that uses a modified instruction set to balance code density and execution speed. PIC18J-series devices extend the classic PIC18 line by adding nanoWatt XLP-style low-power modes, internal oscillator trimming, and word-writeable Flash, placing them in the broader taxonomy of microcontroller -> embedded MCU -> semiconductor. They are widely used in cost-sensitive embedded control where deterministic behavior, mature toolchains (MPLAB X, XC8), and wide availability matter more than raw compute. Key features include an enhanced 8x8 hardware multiplier, multiple serial peripherals (EUSART, SPI, I2C), a 10-bit ADC with up to 16 channels, capture/compare/PWM modules, and the nanoWatt low-power modes typical of the J-series. The internal 8 MHz oscillator eliminates an external resonator in many designs, while word-writeable Flash enables EEPROM emulation without a separate EEPROM array, lowering system BOM cost and reducing PCB area. The PIC18F67J11 builds on the PIC18F67J10 foundation with refined low-power characteristics and improved Flash endurance, targeting USB-less, low-pin-count-touch sensing and human-interface designs. The 64-pin TQFP exposes the full peripheral set: two EUSART ports, two SPI/I2C blocks, one USB 2.0 full-speed transceiver (depending on variant marking), and a 16-channel 10-bit ADC capable of 100 ksps conversion. Typical applications include industrial HMI keypads, low-cost automotive body controllers, sensor hubs, and battery-powered instrumentation. In sensor hubs, the 16-channel 10-bit ADC and 51 I/O lines let designers aggregate multiple analog inputs without external muxes. For automotive body controllers, the wide 2.0V to 3.6V tolerance supports cranking transients when paired with proper supply decoupling. When designing with the PIC18F67J11-I/PT, place a 100 nF decoupling capacitor within 3 mm of each VDD/VSS pair and route the analog and digital VDD traces separately to minimize ADC reference noise. Verify ICD/ICSP pin assignments before layout: the PGC/PGD pair and MCLR/VPP must be reachable for in-circuit debugging without disturbing the high-frequency signal paths.

RFQ Liên hệ
PIC18F67J11T-I/PT - 128KB Flash 8-bit MCU 48MHz TQFP-64 | Microchip
PIC18F67J11T-I/PT

PIC18F67J11T-I/PT - 128KB Flash 8-bit MCU 48MHz TQFP-64 | Microchip

The Microchip PIC18F67J11T-I/PT is a high-performance 8-bit PIC18J family microcontroller delivering 48 MHz / 12 MIPS performance, 128 KB Flash program memory and 3936 bytes of RAM, housed in a 64-pin TQFP (10x10 mm) package with 0.50 mm pitch and tape-and-reel packaging. The 'T' suffix denotes T&R while '-I/PT' indicates the -40C to +85C industrial temperature grade. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, Flash program memory, SRAM data memory, peripherals (ADC, timers, UART, I/O), and oscillator onto one die. PIC18J devices sit in the mid-tier of Microchip's 8-bit PIC lineup, bridging the PIC16 baseline and the PIC32 32-bit family, and they target cost-sensitive embedded designs that need more code space and peripheral count than a PIC16 can provide. Key features include a 2.0 V to 3.6 V single-supply operating range, 5 V-tolerant digital inputs, 51 digital I/O pins, a Parallel Master Port (PMP), a 10-bit ADC, two analog comparators, four 16-bit timers, two UART/SPI/I2C capable EUSART modules, and nanoWatt power management with multiple low-power sleep modes. The enhanced In-Circuit Debugger (ICD) provides three hardware breakpoints, accelerating firmware bring-up on MPLAB Xpress and MPLAB Snap/MPLAB X IDE tool chains. Flash endurance is rated at 10,000 erase/write cycles with 20-year data retention. Architecturally, the PIC18J core uses a 16-bit instruction word with 8-bit data path, a 31-level hardware stack, hardware multiply, and direct/indirect addressing modes - giving PIC16-source compatibility plus C-compiler friendliness through the XC8 toolchain. The 48 MHz oscillator (with on-chip PLL) yields a 12 MIPS instruction throughput with 200 ns minimum instruction cycle. Typical applications include industrial control panels, automotive body/HMI modules, consumer appliances, USB-embedded peripherals (via the PIC18 USB derivatives), graphical LCD controllers using the PMP, and sensor-hub front-ends. The 5 V tolerant inputs simplify interfacing to legacy 5 V logic. When designing, observe the 3.3 V supply constraint - although inputs are 5 V tolerant, the core runs from 2.0-3.6 V, so most designs use an LDO such as MCP1700 from a 5 V rail. Decouple VDD/VSS with 100 nF plus 1 uF ceramic capacitors placed within 3 mm of the pins. This page synthesizes distributor stock, parametric drop-in alternatives, and design notes not found in the manufacturer datasheet, helping engineers select, source, and certify PIC18F67J11T-I/PT designs faster.

RFQ Liên hệ
PIC18F67J50-I/PT - 8-bit 48MHz 128KB Flash USB MCU | Microchip
PIC18F67J50-I/PT

PIC18F67J50-I/PT - 8-bit 48MHz 128KB Flash USB MCU | Microchip

The Microchip Technology PIC18F67J50-I/PT is a high-performance 8-bit PIC18 microcontroller with integrated Full-Speed USB 2.0 transceiver, 128 KB Flash program memory and 3,936 bytes of RAM, housed in a 64-pin TQFP (PT) 10x10 mm package. It executes instructions at up to 48 MHz (12 MIPS) from an internal oscillator and operates across a wide 2.0V to 3.6V supply range. An MCU (microcontroller unit) is a single-chip computer containing a CPU, non-volatile program memory, working RAM, and a rich set of peripherals such as timers, ADCs, communication interfaces, and I/O. Within the Microchip taxonomy, the PIC18 family sits above the baseline PIC16 line and below the PIC24/dsPIC33 16-bit families, using an enhanced 8-bit RISC core with hardware multiplier and C-friendly architecture. Key features include a 10-channel 10-bit ADC, two enhanced USARTs with LIN support, one MI2C and one SPI port rated up to 10 Mbit/s, an integrated Full-Speed USB 2.0 transceiver (12 Mbit/s) that eliminates external PHY circuitry, four timers, and nanoWatt power management with multiple idle and sleep modes. The 64-pin TQFP exposes 50+ general-purpose I/O pins, suiting applications with rich keypad, LCD, or sensor interfaces. The PIC18F67J50-I/PT architecture combines a 16-bit wide instruction path with an 8-bit datapath, providing deterministic interrupt latency and a single-cycle hardware multiplier. Internal oscillator calibration plus Fail-Safe Clock Monitor make the device robust against main crystal failures in industrial environments. The integrated USB SIE handles most protocol overhead in hardware, freeing CPU cycles for application logic. Typical applications include USB HID/CDC peripherals such as custom keyboards, mice, data loggers and industrial sensors, embedded web servers with TCP/IP stacks, automotive LIN slave nodes, low-cost instrumentation, and battery-powered consumer devices leveraging nanoWatt modes. The combination of USB, ample RAM for USB descriptors and TCP/IP buffers, and 128 KB Flash for protocol stacks makes this MCU a compact one-chip solution. When designing with this part, note that core supply VDD must be 2.0-3.6V while I/O pins are 5V-tolerant only on selected pins; a 3.3V LDO or switching regulator is normally used. Decouple VDD/VUSB/VUSB3V3 with 100 nF plus 4.7 uF bulk caps close to the pins, route D+/D- as a 90-ohm differential pair, and respect the USB suspend current budget to benefit from nanoWatt idle modes. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers select and source the PIC18F67J50-I/PT with full context.

RFQ Liên hệ
PIC18F67J50T-I/PT - 8-Bit 48MHz USB MCU 128KB Flash TQFP-64
PIC18F67J50T-I/PT

PIC18F67J50T-I/PT - 8-Bit 48MHz USB MCU 128KB Flash TQFP-64

The Microchip Technology PIC18F67J50T-I/PT is an 8-bit PIC18J-family RISC microcontroller integrating Full-Speed USB 2.0 with 128KB of on-chip flash program memory and 3,904 bytes of RAM in a 64-pin TQFP (10x10 mm) package. It executes instructions at up to 48 MHz from an internal 2% oscillator and targets industrial temperature operation (-40C to +85C) at 2.0V to 3.6V supply. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, optimized for deterministic real-time control, low power, and rich peripheral integration. Within the broader taxonomy, 8-bit MCUs sit below 16-bit and 32-bit MCUs in raw compute performance but above discrete logic in functional density. PIC18 devices extend Microchip's baseline PIC16 architecture with a 16-bit instruction word, linear data memory, and prioritized interrupts, making them suitable for USB-connected embedded designs that also need precision timing, ADC, and serial communication. Key features include a built-in Full-Speed (12 Mbit/s) USB 2.0 device/host/OTG transceiver, four serial ports (USB, I2C, SPI up to 10 Mbit/s, and LIN-capable EUSART), a 10-bit ADC with up to 16 channels, five 16-bit timer/counters, and nanoWatt power management with multiple idle and sleep modes. The 64-pin TQFP exposes 49 digital I/O pins plus dedicated analog, oscillator, and programming/debug pins for ICSP. Architecturally, the PIC18F67J50 uses a Harvard-style 16-bit instruction bus with an 8-bit data path, single-cycle ALU operations, and a hardware multiplier. Its 128KB flash is organized as 64K x 16 words, while the data EEPROM and SRAM sit on independent buses for deterministic interrupt latency. The integrated USB SIE eliminates the need for an external PHY, saving both board area and BOM cost. Typical applications include USB-to-UART bridges, HID peripherals (keyboards, mice, game controllers), industrial sensor data loggers, low-power portable instrumentation, automotive body/comfort LIN nodes, and embedded web servers. The combination of USB connectivity and nanoWatt sleep modes makes the part particularly attractive for always-on USB devices that must draw negligible current when the host is suspended. When designing with this MCU, allocate the analog Vcap pin to a low-ESR 4.7uF to 10uF decoupling capacitor and tie the ENVREG pin to VDD when the internal 2.5V regulator is used. For USB applications, ensure the D+/D- trace impedance is 90 ohm differential and that the Vbus sense pin is connected for proper attach detection. This page consolidates distributor pricing, drop-in same-package alternatives, and application design guidance drawn from Microchip's PIC18F87J50 family datasheet, helping engineers select the right variant and avoid common integration pitfalls not covered in the standalone datasheet.

RFQ Liên hệ
PIC18F67J60-I/PT - 8-bit MCU, 128KB Flash, 10BASE-T Ethernet | Microchip
PIC18F67J60-I/PT

PIC18F67J60-I/PT - 8-bit MCU, 128KB Flash, 10BASE-T Ethernet | Microchip

The Microchip Technology PIC18F67J60-I/PT is an 8-bit PIC® microcontroller featuring an integrated 10 Mbps Ethernet MAC + PHY peripheral, 128 KB of Flash program memory (64K x 16), and 12 KB of RAM, packaged in a 64-pin TQFP (10x10 mm). It runs at up to 41.667 MHz (internal oscillator-equivalent instruction rate) on the PIC18F instruction set and operates from a 4.2 V to 5.5 V supply. An 8-bit microcontroller is a single-chip processor with an 8-bit data path, on-chip Flash program memory, RAM, and integrated peripherals. It sits in the hierarchy: microcontroller -> embedded microprocessor -> integrated circuit -> semiconductor. The PIC18 family extends this with a RISC architecture, hardware multiply, and C-friendly peripherals, while the PIC18F67J60 sub-family adds an embedded Ethernet controller that integrates the MAC, PHY, and pulse transformers, making it a single-chip solution for networked embedded designs. Key features include 128 KB Flash organized as 64K x 16 words, 12 KB SRAM, an integrated 10BASE-T Ethernet MAC/PHY with HP Auto-MDIX support, 54 digital I/O pins, two USARTs, two MSSP (SPI/I2C) ports, two CCP/ECCP modules, a 10-channel 10-bit ADC, and one 8-bit and three 16-bit timers. The Ethernet peripheral is the defining element: it eliminates the need for an external PHY or MAC chip, reducing BOM cost and PCB area in remote-monitoring nodes. Internally, the part uses a Harvard RISC core with a hardware multiplier, runs from an internal 8 MHz oscillator (pll-able to 41.667 MHz), and supports in-circuit programming via ICSP. The Flash and configuration bits are accessed through Microchip's standard MPLAB development flow, and the on-chip Ethernet module uses an internal DMA engine to offload packet handling from the CPU. Typical applications include Industrial Automation (Modbus/TCP nodes, sensor gateways), Building Automation (BACnet/IP thermostats, lighting controllers), Remote Monitoring (utility metering, asset tracking), Embedded Web Servers, and Home Appliance Networking. The wide 4.2 V to 5.5 V supply range also makes it tolerant of unregulated 5 V wall adapters. When designing with this part, ensure the integrated Ethernet PHY is matched to a 1:1 isolation transformer and RJ45 with HP Auto-MDIX wiring to preserve the auto-crossover feature. The 64-pin TQFP footprint requires careful PCB routing of the differential Ethernet pair to maintain 100-ohm differential impedance over a continuous reference plane.

RFQ Liên hệ
PIC18F67J60T-I/PT - 8-Bit MCU w/ Ethernet, 128KB Flash | Microchip
PIC18F67J60T-I/PT

PIC18F67J60T-I/PT - 8-Bit MCU w/ Ethernet, 128KB Flash | Microchip

The Microchip Technology PIC18F67J60T-I/PT is a feature-rich 8-bit PIC18 microcontroller with an integrated 10Mbps Ethernet MAC/PHY peripheral, 128KB (64K x 16) of Flash program memory and 3.8KB of RAM, housed in a 64-pin TQFP (10x10mm) package. It operates from 2.0V to 3.6V supply and runs up to 41.667 MHz (40 MIPS), targeting embedded networking applications requiring a single-chip connected solution. A microcontroller (MCU) is a compact integrated circuit that combines a CPU core, program memory, RAM, and peripheral interfaces on a single die. The PIC18F family uses Microchip's enhanced Harvard RISC architecture with a 16-bit instruction word and 8-bit data path, optimized for deterministic real-time control. PIC18F "J" devices add an internal voltage regulator so the core runs from a regulated 2.5V/1.8V rail while the I/O pads interface directly to 3.3V systems. This hierarchy places the PIC18F67J60 in the PIC18 family, within the 8-bit MCU category, and ultimately inside the broader microcontroller > embedded processor > semiconductor taxonomy. Key features include an integrated 10BASE-T Ethernet controller with on-chip PHY and MAC, 54 digital I/O pins, four 16-bit timers, two CCP and three ECCP modules, dual comparators with input multiplexing, a 12-bit ADC (shared with the 10-bit variant family) and hardware cryptographic acceleration via the on-chip AES engine in select firmware libraries. The 128KB Flash supports self-programming and ICSP, and 3.8KB of RAM plus 1KB of dedicated Ethernet buffer RAM are sufficient for TCP/IP stacks such as Microchip's TCP/IP Lite or uIP. The wide operating range and integrated PHY eliminate external Ethernet components, reducing BOM cost by approximately $1.50 per node. Architecturally, the PIC18F67J60 uses an 8-bit RISC engine with hardware multiply, a 16-bit wide instruction fetch and a 32-level deep hardware stack. The integrated Ethernet block follows IEEE 802.3 10BASE-T, providing MAC, PHY and 10BASE-T magnetics interface in silicon; designers add only an isolation transformer and RJ-45 jack. The internal 2.5V LDO allows single-supply 3.3V operation, while separate analog and digital supply pins support mixed-signal designs. Typical applications include industrial automation (Modbus/TCP and EtherNet/IP gateways), building automation (BACnet/IP and HVAC controllers), remote sensor monitoring over Ethernet, IP-connected home appliances, and low-cost web/SCADA server nodes. Designers should note the integrated Ethernet MAC/PHY requires a unique MAC address (factory-programmed option available) and the part supports Microchip's free TCP/IP stack with example projects for HTTP, SMTP and DHCP servers.

RFQ Liên hệ
PIC18F67J90-I/PT - 8-Bit MCU 128KB Flash 64-LCD TQFP | Microchip
PIC18F67J90-I/PT

PIC18F67J90-I/PT - 8-Bit MCU 128KB Flash 64-LCD TQFP | Microchip

The Microchip Technology PIC18F67J90-I/PT is an 8-bit PIC18J-family CMOS flash microcontroller featuring 128 KB (64K x 16) of program memory and 4 KB of RAM, housed in a 64-pin TQFP (10x10 mm) package. It runs at up to 48 MHz (12 MIPS) from a 4.2 V to 5.5 V supply, with on-chip LCD segment drivers and a rich peripheral set tuned for human-interface and metering applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and peripheral I/O onto one die. PIC microcontrollers use Microchip's RISC-based PIC18 Harvard architecture with separate program and data buses, allowing deterministic instruction timing. The PIC18J sub-family (J-series) is characterized by 3.3 V core / multi-rail I/O, internal phase-locked loop (PLL) frequency synthesis, and ultra-low-power deep-sleep modes that suit battery-powered designs. Key differentiating features of the PIC18F67J90 include integrated LCD segment driver hardware (up to 4 common x 32 segment LCD glass), a 12-channel 10-bit ADC, two analog comparators, two USART modules, two MSSP (SPI/I2C) modules, an internal 31 kHz to 8 MHz oscillator block with PLL, and a real-time clock/calendar with separate 32 kHz oscillator. The 64-pin TQFP exposes 54 digital I/O lines plus dedicated LCD segment pins. The part uses a 16-bit instruction word modified Harvard architecture with 200 ns minimum instruction cycle. On-chip self-programmability allows bootloader-based firmware upgrades, and the nanoWatt Technology power-management set provides idle, sleep, and deep-sleep modes with microamp-level currents. Typical applications include handheld meters, thermostats, home security panels, portable medical devices, and utility metering products where the on-chip segment LCD and low-power modes directly reduce system BOM. The wide operating range and integrated segment driver also suit automotive clusters and white-goods user interfaces. When designing, verify the Vcore/Vdd rail topology: the PIC18F67J90 family uses an on-chip voltage regulator that requires an external bulk cap and a low-ESR decoupling network; the LCD bias network must be chosen per glass size. Always check the errata sheet for current silicon revision behavior. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, supporting faster sourcing and schematic reuse.

RFQ Liên hệ
PIC18F67J90T-I/PT - 8-Bit 48MHz 128KB Flash LCD MCU | Microchip
PIC18F67J90T-I/PT

PIC18F67J90T-I/PT - 8-Bit 48MHz 128KB Flash LCD MCU | Microchip

The Microchip Technology PIC18F67J90T-I/PT is an 8-bit PIC18J-family microcontroller running up to 48 MHz internal clock (12 MIPS) with 128 KB on-chip Flash program memory and 4 KB RAM, housed in a 64-pin TQFP (10x10 mm) package. It integrates an integrated segmented LCD driver, making it suited to handheld meters, thermostats, home-security panels, portable medical devices and utility-metering products. The part is supplied in tape-and-reel (T suffix) and operates over the industrial -40C to +85C temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of peripherals (timers, ADC, communication ports, I/O). The PIC18F67J90 belongs to Microchip's PIC18F 'J' family, which uses a 16-bit enhanced instruction set running from a 2.0V-3.6V core rail while allowing 5.5V-tolerant I/O. Within the broader taxonomy it is a microcontroller -> 8-bit MCU -> embedded controller -> semiconductor IC, distinguished from 16/32-bit parts by its 8-bit data path and 16-bit instruction word. Key specifications include 128 KB (64K x 16) Flash, 4 KB RAM, 54 digital I/O pins, an internal LCD driver supporting up to 4 commons and up to 48 segments, two USART, two MSSP (SPI/I2C), a 12-channel 10-bit ADC, two analog comparators and a real-time clock calendar with separate 32 kHz oscillator. The part runs from 2.0 V to 3.6 V (VDDCORE) and tolerates I/O voltages up to 5.5 V on digital pins. It offers 100,000 erase/write cycle endurance and >40-year Flash retention. The PIC18F67J90 uses an enhanced Harvard architecture with a 16-bit instruction word and an 8-bit data path, and Microchip's nanoWatt XLP technology for low-power sleep modes (typical sleep current in the low-uA range). The integrated LCD controller charges the segment commons in software-controlled sequences, allowing direct connection to glass without an external charge-pump IC. Internal 8 MHz and 31 kHz RC oscillators plus PLL provide flexible clocking from a single 3V supply. Typical applications include handheld battery-powered meters (utility/gas/water), home thermostats, electronic shelf labels, blood-pressure/glucose monitors, security keypads and segment-LCD automotive clusters. The combination of integrated segmented-LCD driver, low-power modes and ample Flash makes the family a one-chip solution for any segment-LCD human-machine interface. Designers should budget for the dedicated VDDCORE/VDDIO/VLCD rails and provide proper bias resistors on the LCD segment pins. The internal PLL requires the configuration bits to be set correctly, and JTAG is disabled by default to free those pins. Use MPLAB X IDE with the XC8 compiler for code development and ICD3/PICKit4 for in-circuit debug. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Liên hệ
PIC18F67J93-I/PT - 8-Bit 48MHz 128KB Flash LCD MCU 64-TQFP | Microchip
PIC18F67J93-I/PT

PIC18F67J93-I/PT - 8-Bit 48MHz 128KB Flash LCD MCU 64-TQFP | Microchip

The Microchip Technology PIC18F67J93-I/PT is an 8-bit PIC18 RISC microcontroller running at 48 MHz with 128 KB of FLASH program memory (64K x 16 organization), 4 KB of RAM, and an integrated segment LCD driver, packaged in a 64-pin TQFP (10x10 mm). It belongs to the PIC18F87J93 family of high-performance microcontrollers with nanoWatt XLP technology and is offered in industrial -40C to +85C temperature grade. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (FLASH), data memory (RAM), and a rich set of peripherals such as timers, ADC, communication interfaces, and I/O. The PIC18F67J93 sits inside Microchip's PIC18 hierarchy: PIC18 -> 8-bit PIC -> RISC microcontroller -> embedded MCU -> semiconductor. Its 64-pin TQFP package and 48 MHz core make it suitable for human-machine interface (HMI) designs where segment LCDs and analog measurement are co-located on the same board. Key features include an integrated segment LCD driver (up to 4 common x 48 segment typical configurations), 12-bit A/D converter with 12 channels, 51 digital I/O pins, multiple serial interfaces (UART, SPI, I2C), and nanoWatt XLP power management for battery-aware applications. The wide 2.0V to 3.6V operating range supports both 2.5V and 3.3V regulated rails, and internal oscillator options reduce external component count. Technical depth: the device uses an enhanced Harvard architecture with separate program and data buses, 16-bit instructions, and an 8-level hardware stack. The 12-bit ADC supports up to 12 channels of analog input, and the segment LCD controller directly drives glass with selectable bias and contrast via software, eliminating external LCD driver ICs. Typical applications include handheld meters, thermostats, home security panels, portable medical devices, and utility metering products. The integrated segment LCD makes it especially valuable in any cost-sensitive product that must display numeric or alphanumeric data without a TFT. Design consideration: ensure your PCB layout places the segment LCD traces in a tight, balanced routing pattern and provides adequate decoupling (typically 100 nF plus 10 uF bulk) near the VDD/VSS pins. Watch the absolute maximum VDD of 3.6V - this part is NOT 5V tolerant on I/O. This page synthesizes distributor pricing, drop-in pin-compatible alternatives in the same 64-TQFP footprint, and practical design notes not found in the manufacturer datasheet alone, supporting both new designs and obsolescence-risk mitigation for PIC18F67J93-I/PT.

RFQ Liên hệ
PIC18F67J93T-I/PT - 128KB Flash LCD MCU, 64-TQFP | Microchip
PIC18F67J93T-I/PT

PIC18F67J93T-I/PT - 128KB Flash LCD MCU, 64-TQFP | Microchip

The Microchip Technology PIC18F67J93T-I/PT is a 64-pin TQFP-packaged 8-bit PIC18J-series microcontroller built around a 48 MHz internal oscillator, 128 KB of Flash program storage and an integrated segmented LCD driver. The 'J' suffix designates the 2.0 V to 3.6 V wide-range core, while the '93' carries 128 KB (64K x 16) of self-programmable Flash, 3923 bytes of data RAM, a 12-bit ADC with 12 channels and a Charge Time Measurement Unit (CTMU) that supports capacitive touch sensing. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, volatile data memory, and a rich set of peripherals such as timers, ADC, communication interfaces and I/O ports on a single silicon die. Within the broader taxonomy, the PIC18F belongs to the PIC family -> 8-bit RISC microcontrollers -> microcontrollers (MCUs) -> embedded controllers -> semiconductors. The 'F' denotes Flash program memory, allowing in-system re-programmability without an external ROM. The integrated LCD driver up to 128 segments and the ultra-low-power nanoWatt technology make this sub-family ideal for battery-powered graphical or alphanumeric display products. Key features include 51 usable I/O pins, 16 MIPS throughput, a 12-bit A/D converter capable of 12 input channels, multiple Enhanced USART, SPI and I2C interfaces, an integrated LCD module with charge pump, and nanoWatt power management that drops quiescent current below 1 µA in sleep mode. The PIC18 Harvard architecture provides deterministic instruction timing and a rich C-optimized instruction set, while the 16-bit-wide instruction word preserves code density close to 16-bit cores. Typical applications span handheld utility meters, electronic thermostats, home-security panels, portable medical monitors, and industrial control panels where segmented LCD displays and capacitive touch replace mechanical keypads. Wide -40 °C to +85 °C industrial operating range plus nanoWatt idle modes let the same silicon target both line-powered and battery-powered enclosures. The 64-pin TQFP industrial-temperature grade (-I) and tape-and-reel ('T') packaging make it equally at home on a hand-repair bench or in a high-volume SMT line. When designing with this part, ensure the VDD/VSS supply decoupling follows the datasheet typical application circuit - one 0.1 µF ceramic close to each VDD/VSS pair, and a bulk 4.7 µF to 10 µF tantalum or ceramic on the main rail. Use the internal regulator only after confirming the VDDCORE pin has its own 10 µF + 0.1 µF bypass network. For LCD designs, drive segment lines with a 1 kHz to 200 Hz frame frequency and check the bias network resistors per the LCD voltage reference configuration.

RFQ Liên hệ
PIC18F67J94-I/PT - 8-Bit 64MHz 128KB Flash USB XLP MCU | Microchip
PIC18F67J94-I/PT

PIC18F67J94-I/PT - 8-Bit 64MHz 128KB Flash USB XLP MCU | Microchip

The Microchip Technology PIC18F67J94-I/PT is an 8-bit PIC18 microcontroller with 128KB Flash, 4KB RAM, integrated full-speed USB 2.0, and a segmented LCD driver (up to 256 segments), housed in a 64-pin TQFP (10x10 mm) package. It runs up to 64 MHz (16 MIPS) from a 2.0V-3.6V supply and features nanoWatt XLP extreme-low-power technology. An 8-bit microcontroller (MCU) is a programmable computing IC that integrates a CPU, non-volatile program memory, working RAM, and peripherals on a single die. MCUs sit at the bottom of the embedded computing hierarchy: MCU -> microcontroller -> embedded controller -> semiconductor IC. Within the PIC family, the PIC18 line targets high-performance 8-bit designs with C-friendly Harvard architecture, hardware multiplier, and rich peripherals - bridging simple 8-bit control and 16/32-bit application processors. Key features include 128KB (64K x 16) self-programmable Flash, 4KB RAM, an integrated LCD segment driver supporting up to 256 segments and 64 commons, USB 2.0 Full-Speed with on-chip transceiver, 10/12-bit ADC modules, multiple EUSART, I2C, SPI, and nanoWatt XLP sleep currents in the sub-microamp range. The 64-pin TQFP package exposes 50+ general-purpose I/O pins for keypad, display, and sensor integration. The PIC18F67J94 implements Microchip's enhanced Harvard architecture with a 16-bit instruction word but 8-bit data path, plus a hardware multiply unit and C compiler-friendly instruction set. Its XLP nanoWatt technology - deep sleep currents down to 20 nA typical - makes the device class-leading among USB-capable 8-bit MCUs for battery-powered HMI designs. Typical applications include USB-connected human-machine interfaces (HMI) with LCD keypads, battery-powered consumer appliances with segmented displays, medical point-of-care devices, industrial sensor readout modules, and e-meter / instrumentation front-ends. The on-chip USB and LCD driver reduce BOM cost vs. two-chip implementations. When designing with this device, ensure the internal 3.3V LDO is bypassed with adequate bulk capacitance and that VUSB3V3 is tied correctly for bus-powered USB designs. Always program CONFIG settings for the intended oscillator mode and enable the low-voltage programming fuse for in-circuit firmware updates. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC18J family, and practical design notes not found in the manufacturer datasheet, giving engineers a one-stop reference for selecting this MCU.

RFQ Liên hệ
PIC18F67K22-E/MR - 64-Pin 128KB Flash nanoWatt XLP MCU | Microchip
PIC18F67K22-E/MR

PIC18F67K22-E/MR - 64-Pin 128KB Flash nanoWatt XLP MCU | Microchip

The Microchip Technology PIC18F67K22-E/MR is a 64-pin, 8-bit PIC18 enhanced flash microcontroller delivering up to 64 MHz operation with 128 KB flash program memory and 4 KB RAM, housed in a 64-VQFN (9x9 mm) package. A microcontroller (MCU) is a single-chip computer containing a CPU, program memory (flash/ROM), data memory (RAM), and a rich set of peripherals on one silicon die. The PIC18 family from Microchip is built on an enhanced Harvard RISC architecture that executes most instructions in a single cycle (as fast as ~25 ns at 64 MHz). Within the broader taxonomy, PIC18F67K22 sits under: PIC18 K-series -> PIC18 family -> 8-bit MCU -> microcontroller -> embedded computing IC -> semiconductor. The 'K-series' adds nanoWatt XLP technology for ultra-low-power operation, targeting battery-powered and energy-harvesting applications. Key features include 128 KB of flash with self-programmability, 4 KB of SRAM, 1 KB of EEPROM, an integrated 12-bit A/D converter, and the Charge Time Measurement Unit (CTMU) that simplifies capacitive touch sensing. The device supports USB, CAN, I2C, SPI, and UART interfaces, plus a hardware RTCC and multiple PWM/timer/capture modules. nanoWatt XLP technology achieves deep sleep currents below 100 nA, enabling multi-year battery life in sensor and metering designs. The PIC18F67K22 uses Microchip's enhanced instruction set with hardware multiplier support, providing enough MIPS headroom for state-machine control, protocol bridging, and modest DSP-like filtering. The 12-bit ADC with up to 16 channels and the CTMU enable button replacement and capacitive proximity sensing without external analog front ends. The wide supply range (1.8 V to 5.5 V for the F-family; the PIC18F67K22 family operates at 4.2 V to 5.5 V) covers both 3.3 V and 5 V system rails. Typical applications include capacitive-touch user interfaces for white goods and industrial HMIs, automotive body and accessory modules, USB peripherals, sensor hubs with battery management, and ultra-low-power remote sensor nodes. The CTMU plus nanoWatt XLP combination makes the device especially attractive for sealed-button replacements in medical and appliance designs. When designing with this MCU, ensure the supply decoupling follows the datasheet reference layout - typically one 100 nF ceramic plus one 10 µF bulk capacitor placed within 1 cm of VDD. For capacitive-touch applications, follow the CTMU layout guidelines in the application notes to avoid false triggers from switching noise on adjacent traces. This page synthesizes distributor pricing, drop-in alternatives from the same PIC18 K-series family, and practical design notes not aggregated in the manufacturer datasheet alone, helping engineers evaluate the PIC18F67K22-E/MR against pin-compatible drop-in choices.

RFQ Liên hệ
PIC18F67K22-E/PT - 8-bit MCU, 128KB Flash, 64-Pin TQFP | Microchip
PIC18F67K22-E/PT

PIC18F67K22-E/PT - 8-bit MCU, 128KB Flash, 64-Pin TQFP | Microchip

The Microchip Technology PIC18F67K22-E/PT is an 8-bit PIC RISC microcontroller featuring 128KB Flash program memory and a 64-pin TQFP surface-mount package. It runs at up to 64MHz internal clock speed, supports 4.2V to 5.5V supply operation, and provides 54 digital I/O pins with nanoWatt XLP Technology for ultra-low-power battery applications. The part integrates 12-bit A/D conversion, a Charge Time Measurement Unit (CTMU) for capacitive touch, multiple serial peripherals, and self-programmable Flash. An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, non-volatile program memory (Flash/ROM), volatile data memory (RAM), and peripheral interfaces on a single silicon die. Within the PIC18 family, the PIC18F67K22 belongs to the high-performance enhanced Flash MCU line, which sits between the baseline PIC10/12/16 families and the 16-bit PIC24/dsPIC families in the broader Microchip 8-bit -> 16-bit -> 32-bit MCU taxonomy. These devices are commonly used as the central controller in embedded systems where deterministic response, low power, and rich analog integration matter more than raw MIPS. Key features of the PIC18F67K22 include 128KB (64K x 16) of self-writeable Flash, 4KB RAM, 1KB EEPROM, a 12-bit A/D converter with up to 16 channels, multiple capture/compare/PWM modules, two Enhanced USART modules, two MSSP (SPI/I2C) modules, an 8-bit parallel port, and a CTMU block for capacitive touch and time-of-flight sensing. nanoWatt XLP Technology delivers idle currents in the microamp range, making the part attractive for battery-powered and energy-harvesting designs. Typical applications for the PIC18F67K22-E/PT include human-machine interface (HMI) panels with touch keys, industrial control boards requiring 12-bit analog sensing, low-power remote sensor nodes, USB/HID peripherals using the parallel port, and white-goods or appliance controllers where 54 I/O pins are needed. The 64-pin TQFP footprint is the same land pattern as the rest of the PIC18F6xK22 family, enabling PCB reuse across part variants. When designing with this MCU, ensure the 5V supply rail is well-decoupled with at least a 100nF ceramic plus 10uF bulk close to the VDD pins, and that the MCLR reset pin is pulled high through the recommended resistor network. Program/debug is supported via Microchip's ICD 3, REAL ICE, or PICkit 3 tools using the standard 2-wire ICSP interface. This page synthesizes distributor pricing, drop-in alternatives from the same TQFP-64 family, and practical design notes not found in the bare manufacturer datasheet, giving procurement and design engineers a single reference for the PIC18F67K22-E/PT.

RFQ Liên hệ
PIC18F67K22-I/MR - 8-bit 64MHz 128KB Flash MCU | Microchip
PIC18F67K22-I/MR

PIC18F67K22-I/MR - 8-bit 64MHz 128KB Flash MCU | Microchip

The Microchip Technology PIC18F67K22-I/MR is an 8-bit PIC18 microcontroller running at up to 64 MHz (with 40 MHz cited as the nominal instruction-cycle clock on some distributor datasheet summaries) that integrates 128 KB of Flash program memory, 4 KB of RAM, and 1 KB of EEPROM in a 64-pin VQFN (9x9 mm) package. It belongs to the PIC18F K2x family of nanoWatt XLP microcontrollers, providing ultra-low-power sleep modes suitable for battery-powered and energy-harvesting designs. What is a microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), working RAM, and a rich set of peripherals (ADC, timers, communication ports, I/O). The PIC18F family uses Microchip's enhanced 8-bit Harvard RISC architecture with 16-bit opcodes, offering 200 ns instruction execution at 40 MHz. MCUs sit at the core of embedded systems, taking sensor inputs, running application firmware, and driving actuators or displays. Key features of the PIC18F67K22 include 54 digital I/O pins, an integrated 12-bit A/D converter with up to 16 channels, a Charge Time Measurement Unit (CTMU) that simplifies capacitive-touch and capacitive sensing designs, multiple EUSART, I2C, and SPI ports, and the nanoWatt XLP technology suite that delivers sleep currents in the nanoampere range. The 1.4 KB of data EEPROM provides non-volatile storage for calibration, configuration, and user data separate from the main program Flash. The device uses a modified Harvard architecture with separate code and data buses, executed through a C-optimizing compiler ecosystem. Up to 16 MIPS peak performance at 64 MHz supports real-time control loops. The CTMU peripheral allows time-based current integration for measuring capacitance, supporting mTouch touch sensing without external analog front ends. Typical applications include capacitive-touch user interfaces, industrial sensor conditioning, low-power wireless sensor nodes, smart meters, home appliances, automotive body controllers, and USB peripherals (with the on-chip full-speed USB 2.0 device transceiver). The wide operating voltage range from 1.8V to 5.5V supports both 3.3V and 5V designs. When designing with this part, note that the VQFN-9x9 footprint demands careful PCB layout with a properly sized thermal/exposed pad. The device is available in industrial (-40C to +85C) and extended (-40C to +125C) temperature grades. This page synthesizes distributor pricing, drop-in alternatives within the PIC18F K2x family, and practical design notes not found in the manufacturer datasheet.

RFQ Liên hệ
PIC18F67K22-I/PT - 8-bit 64MHz 128KB Flash MCU | Microchip
PIC18F67K22-I/PT

PIC18F67K22-I/PT - 8-bit 64MHz 128KB Flash MCU | Microchip

The Microchip Technology PIC18F67K22-I/PT is an 8-bit PIC18 enhanced Flash microcontroller featuring nanoWatt XLP (eXtreme Low Power) technology, operating at up to 64 MHz with 128 KB of Flash program memory, 4 KB of RAM, and 1 KB of EEPROM, housed in a 64-pin TQFP (10x10 mm) package. The device integrates a 12-bit A/D converter with up to 16 channels, multiple communication peripherals (UART, SPI, I2C), and a Charge Time Measurement Unit (CTMU) for capacitive touch sensing and precise time measurement. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, I/O peripherals, and interrupt logic. The PIC18F family sits within the broader 8-bit PIC microcontroller hierarchy from Microchip, occupying the high-performance tier above the PIC16 and baseline PIC10/12/14 families. XLP technology is a suite of power-management modes (including nanoWatt XLP sleep currents down to 300 nA) that make this MCU well suited to battery-powered and energy-harvesting applications where quiescent draw dominates battery life. Key differentiating features include 64 MHz maximum clock speed (with a 16 MIPS instruction throughput at that rate), 53 digital I/O pins, a 12-bit A/D converter capable of up to 100 ksps, two analog comparators, a 16-bit timer/counter module with PWM, and CTMU hardware for touch and time-of-flight measurements. The wide operating voltage range of 1.8 V to 5.5 V supports both 3.3 V and 5 V system designs without external level translation. The PIC18F67K22-I/PT is the industrial temperature grade (-40C to +85C) variant in the 64-pin TQFP package. Architecturally, the device uses an enhanced Harvard architecture with separate program and data buses, a 16-bit instruction set, and hardware multiplier for faster arithmetic than baseline PIC cores. The integrated nanoWatt XLP modes (Run, Idle, Sleep, and RTCC) and the RTCC module (with dedicated 32 kHz crystal support) provide fine-grained control over active and standby power budgets. Brown-out Reset (BOR), Watchdog Timer (WDT), and Power-on Reset (POR) hardware ensure reliable start-up in noisy industrial environments. Typical applications include capacitive touch user interfaces, battery-powered sensor nodes, industrial control panels, low-power metering, USB device peripherals (using the 8-bit USB-capable sibling PIC18F46K22 or external transceiver), automotive body electronics (with the extended-grade variant), and embedded HMI displays. The CTMU peripheral simplifies capacitive touch button and slider implementations by measuring charge time rather than requiring an external timer IC. When designing with this part, pay attention to the in-circuit serial programming (ICSP) pins and provide a robust decoupling network (100 nF + 10 uF near VDD) to keep the analog and digital rails clean. The 64-pin TQFP footprint is shared with many PIC18F siblings, allowing in-package migration to PIC18F87K22 or down-migration to PIC18F47K22 with minimal PCB rework. This page synthesizes distributor pricing, drop-in alternatives within the PIC18F family, and practical design notes not aggregated on any single manufacturer or distributor page.

RFQ Liên hệ
PIC18F67K22-I/PTRSL - 8-Bit 64MHz XLP MCU, 128KB Flash, 64-TQFP | Microchip
PIC18F67K22-I/PTRSL

PIC18F67K22-I/PTRSL - 8-Bit 64MHz XLP MCU, 128KB Flash, 64-TQFP | Microchip

The Microchip Technology PIC18F67K22-I/PTRSL is a high-performance 8-bit PIC18 microcontroller with nanoWatt XLP technology, 128 KB Flash program memory, 4 KB RAM, and 1 KB EEPROM, packaged in a 64-pin TQFP (10x10 mm). It operates at up to 64 MHz instruction rate (16 MIPS) from a 1.8V to 5.5V supply and integrates a 12-bit A/D converter with up to 16 channels, multiple communication peripherals, and the Charge Time Measurement Unit (CTMU) for capacitive touch sensing. What is a PIC18 microcontroller? The PIC18 family is Microchip's high-performance 8-bit RISC architecture line, optimized for low power, robust peripherals, and a long product lifecycle, sitting above the baseline PIC16 and PIC12 families in Microchip's 8-bit portfolio. XLP (eXtreme Low Power) nanoWatt technology refers to a set of clocking, sleep mode, and peripheral gating techniques that allow sleep currents in the nanoamp range while retaining RAM and fast wake-up for battery-powered and energy-harvesting applications. Key features include the nanoWatt XLP sleep current of approximately 20 nA, an active current of about 8 mA at 64 MHz, a CTMU peripheral for capacitive touch and precise time measurement, an Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART), two MSSP ports for SPI/I2C, multiple 16-bit timers, capture/compare/PWM modules, and a 12-bit A/D converter with up to 16 channels. The part also supports self-programming and an integrated LCD driver option on related die variants. Technically, the PIC18F67K22 family uses a modified Harvard architecture with a 16-bit instruction word and 8-bit data path, executed through a 2-stage pipeline at 4 clock cycles per instruction. Internal oscillator options support 16 MHz to 64 MHz operation with PLL, providing clock accuracy suitable for UART communication without external crystals in many designs. The wide 1.8V-5.5V supply range enables direct operation from Li-Ion or two AA cells in portable designs. Typical applications include capacitive touch user interfaces with the CTMU, battery-powered remote sensors with nanoWatt XLP, industrial control panels with 12-bit measurement, USB-enabled human interface devices when paired with an external transceiver, LCD-based consumer appliances, and automotive body/comfort modules using the wider PIC18 K-series derivatives. When designing with this device, ensure proper decoupling with a 100 nF ceramic capacitor close to each VDD pin and a bulk capacitor on the regulated rail. The CTMU requires careful PCB layout and a reference current calibration step for accurate capacitive touch readings, and unused I/O pins should be configured as outputs low to minimize quiescent current. This page consolidates distributor pricing, drop-in alternative MPNs sourced from Microchip's own part-numbering system, and practical design notes that are not aggregated in the manufacturer datasheet itself.

RFQ Liên hệ