Vi điều khiển

Sản phẩm (20.000+)

R5F21142SP#U0 16-Bit 20MHz 8KB MCU | Renesas Electronics
R5F21142SP#U0

R5F21142SP#U0 16-Bit 20MHz 8KB MCU | Renesas Electronics

Renesas Electronics R5F21142SP#U0 is a 16-bit single-chip microcomputer in the R8C/14 family, operated at up to 20 MHz and supplied in a 20-pin LSSOP package. The verified product information identifies 8 KB of flash memory, a 16-bit R8C CPU core, and 3/5 V operation. The part is intended for embedded control applications that require a compact surface-mount microcontroller, modest on-chip flash, and a 20 MHz processing capability. It is a non-promotion R8C/14 Group device, so it is primarily relevant to systems already using the R8C platform. A microcontroller is an integrated circuit that combines a processor core, program memory, data memory, peripherals, and input/output functions in one package. The R8C/Tiny Series CPU core used by this device provides the execution environment for embedded control logic, while the 8 KB flash provides program storage for firmware. This MCU belongs to the broader hierarchy of microcontrollers, embedded processors, and semiconductors used in industrial, consumer, and communication equipment. The R5F21142SP#U0 combines a 20 MHz maximum operating frequency with 16-bit processing and 8 KB flash in a 20-LSSOP package. Verified distributor information identifies the R8C/1x/14 family and describes the device as a 16-bit MCU with 8K x 8 flash. The package is identified as 20-LSSOP with a stated width of 4.40 mm. The available verified data does not specify RAM size, peripheral details, pin names, operating temperature, or electrical limits, so those values should be confirmed in the manufacturer datasheet before design release. The manufacturer describes the R8C/14 Group as using a high-performance silicon-gate CMOS process and an R8C/Tiny Series CPU core. It also states that the group is supported for customers that have already adopted these products, while recommending the RL78/G12 Group for new designs. This lifecycle statement is important when selecting a replacement for an existing R8C design because migration to a different MCU family may require software, toolchain, and board-level changes. Typical uses for this device include compact industrial controllers, peripheral controllers, instrumentation, and legacy embedded platforms where the existing R8C software and 20-LSSOP footprint are already established. The 3/5 V operating capability can support systems that need compatibility with conventional 3.3 V or 5 V logic environments. The available information does not identify a specific reference design or application circuit, so those applications should be treated as general application categories rather than manufacturer-qualified examples. For PCB design, confirm the exact 20-pin LSSOP land pattern, exposed-pad requirements, recommended decoupling, programming interface, and pin multiplexing against the official datasheet. Do not infer missing pin functions from the package outline. Because this is a non-promotion MCU, production planning should also verify lifecycle status, software-tool availability, and the availability of a suitable replacement before committing to new platform designs. This page consolidates the verified distributor and manufacturer information for R5F21142SP#U0, including pricing, package details, lifecycle context, sourcing links, and practical selection considerations. It distinguishes documented R8C/14 characteristics from parameters that remain unavailable in the supplied data, helping engineers make an evidence-based sourcing decision.

RFQ Liên hệ
R5F21142SP#W4 - 16-Bit 20MHz MCU | Renesas
R5F21142SP#W4

R5F21142SP#W4 - 16-Bit 20MHz MCU | Renesas

Renesas Electronics R5F21142SP#W4 is a 16-bit R8C/1x/14 microcontroller operating at up to 20 MHz, with 8 KB of flash program memory, 512 x 8 bits of RAM, and 13 I/O ports in a 20-pin LSSOP package. The operating voltage range is 3 V to 5 V, and the device is supplied in tape-and-reel packaging for automated assembly. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, I/O ports, timers, and communication peripherals on one integrated circuit. The R5F21142SP belongs to the R8C/Tiny family of 16-bit embedded processors. It provides the basic control functions needed for compact industrial, consumer, appliance, and embedded-control products without requiring a separate processor and external interface components. Key features include a 20 MHz R8C CPU core, 8 KB of flash memory for program storage, 512 x 8 bits of SRAM, and 13 general-purpose I/O ports. The 3 V to 5 V supply range supports both 3.3 V and 5 V system architectures. An internal oscillator is specified, while the 20-LSSOP package measures approximately 4.40 mm in width and supports compact, surface-mount PCB construction. The silicon-gate CMOS implementation combines the R8C/Tiny CPU core with embedded flash memory and a low pin count. Its 16-bit architecture and instruction set are intended for embedded-control workloads where deterministic control, compact firmware, and low board area are more important than application-processor graphics performance. Program storage is sufficient for boot logic, state machines, communication handling, and peripheral coordination. Typical uses include small motor and actuator controllers, sensor-conditioning systems, appliance control panels, industrial sequencers, temperature controllers, and compact embedded-control modules. The 13 available I/O ports can support digital inputs, output functions, and external interfaces where the selected board configuration does not require more pins. Firmware and peripheral allocation must be checked against the complete manufacturer datasheet before assigning functions. Designers should follow the manufacturer’s recommended application circuit for power, decoupling, reset, clock, and programming connections. The 3 V to 5 V operating range and 20 MHz speed limit must both be respected when selecting external components and programming tools. Because this R8C/1x/14 group is intended for customers already using the product family, new projects should evaluate the manufacturer-recommended RL78/G12 series rather than assuming a feature-equivalent pin-compatible replacement. This product page consolidates the confirmed R5F21142SP#W4 specifications, sourcing information, package details, lifecycle guidance, and design considerations. It also distinguishes the verified 20-LSSOP device from recommended new-design families, helping engineers assess fit without implying that a cross-family controller is a drop-in replacement.

RFQ Liên hệ
R5F21143SP#U0 - 16-Bit 20MHz MCU | Renesas Electronics
R5F21143SP#U0

R5F21143SP#U0 - 16-Bit 20MHz MCU | Renesas Electronics

The Renesas Electronics R5F21143SP#U0 is a 16-bit R8C/1x/14-series microcontroller operating at up to 20 MHz, with 12 KB of flash memory, in a 20-pin LSSOP package. It is designed for 3 V and 5 V embedded-control systems that require efficient instruction execution, compact packaging, and dedicated firmware support. The R8C/1x/14 group is a legacy product line recommended only for customers that have already adopted it. An R8C microcontroller is a single-chip embedded controller combining a processor core, flash program memory, data memory, timers, serial interfaces, and I/O resources. The R8C/1x/14 family belongs to the broader Renesas M16C and R8C/Tiny lineage of 16-bit microcomputers. Its CISC-style instruction architecture provides compact code execution for embedded products, while the 20 MHz operating rate supports responsive control of peripherals and communication tasks. The target device provides 12 KB of flash memory and a maximum clock frequency of 20 MHz. These characteristics make it suitable for compact consumer products, industrial controllers, instrument subsystems, and legacy equipment in which a modest code-memory budget and low pin count are more important than a large application-specific peripheral set. The manufacturer describes the family as using a high-performance silicon-gate CMOS process and an R8C/Tiny Series CPU core. The R5F21143SP#U0 is offered in a 20-pin plastic molded LSSOP package, which supports compact PCB construction while exposing the microcontroller's principal ports and control signals. Its operating supply range is 3 V to 5 V according to distributor product information, allowing integration into conventional embedded-control rails. Exact RAM, peripheral, timing, and electrical-limit details should be confirmed against the manufacturer datasheet before schematic capture or firmware qualification. Typical applications include small appliance controllers, sensor-conditioning systems, industrial automation modules, programmable control panels, and communication-enabled embedded products. Because this MCU belongs to a non-promotion family, it is most appropriate for maintaining an established design rather than starting a new platform when a currently promoted Renesas MCU family can satisfy the requirements. Engineers should preserve the established R8C/1x/14 board layout, clock configuration, memory map, and development-tool workflow when replacing an existing component. Review the pin-description table and electrical characteristics in the manufacturer datasheet before assigning I/O, selecting bypass capacitors, or changing the 3 V or 5 V supply configuration. This page consolidates the exact orderable MPN, core operating parameters, package identity, application guidance, lifecycle considerations, and same-family replacement options into an engineering-focused reference for legacy R8C/1x/14 designs.

RFQ Liên hệ
R5F21144SP#U0 - 16-Bit 20MHz R8C MCU | Renesas Electronics
R5F21144SP#U0

R5F21144SP#U0 - 16-Bit 20MHz R8C MCU | Renesas Electronics

Renesas Electronics R5F21144SP#U0 is a 16-bit R8C/14 microcontroller operating at up to 20 MHz with 16 KB of flash program memory in a 20-pin LSSOP package. The device operates from 2.7 V to 5.5 V, provides a 10-bit four-channel ADC, and offers 13 general-purpose I/O pins. These characteristics make it suitable for compact embedded control systems requiring efficient 16-bit processing, on-chip flash storage, and mixed-signal measurement. A microcontroller is a programmable semiconductor that combines a CPU core, memory, peripheral interfaces, and I/O ports on one integrated circuit. The R5C family belongs to the embedded-processor hierarchy and uses the R8C/Tiny Series CPU core. Compared with an 8-bit MCU, a 16-bit controller can perform arithmetic and address larger data structures more efficiently, while retaining the low cost, low power, and real-time control characteristics expected from a dedicated embedded controller. Key features include a 20 MHz maximum operating frequency, 16 KB flash program memory organized as 16K x 8, a four-channel 10-bit ADC, and an operating temperature range of -20°C to +85°C. Flash memory allows firmware to be programmed and updated without an external programmable memory device. The 20-LSSOP outline also supports compact PCB layouts where component density and a moderate pin count are important. The R8C/14 architecture is implemented using a silicon-gate CMOS process and incorporates a high-performance R8C/Tiny Series CPU core with instruction-efficient 16-bit operations. The target includes 13 I/O pins according to its listed device data, leaving sufficient interface capacity for digital control, communications, and analog monitoring. Exact clock, timer, and peripheral configurations should be confirmed against the manufacturer datasheet before final clock-tree and peripheral allocation. Typical uses include compact industrial controllers, consumer appliances, sensor-interfaces, programmable timers, and embedded equipment requiring modest computation and local data acquisition. The four ADC channels are useful for monitoring temperature, position, pressure, or analog control signals, while the 13 I/O pins support switches, indicators, actuators, and serial or bus-connected peripherals. Designers should plan decoupling, clock routing, programming access, and mixed-signal grounding carefully. Place input and output capacitors close to the supply pins, route analog inputs away from switching nodes, and preserve clear programming access. Because this R8C/14 group is a non-promotion family for existing adopters, new projects should also evaluate Renesas's recommended RL78/G12 path when long-term new-design support is a priority. This product page consolidates the verified device specifications, package information, lifecycle position, application guidance, and same-family drop-in options into a practical engineering reference. It also highlights the trade-off between preserving an installed R8C/14 design and moving a completely new design to the manufacturer-recommended RL78/G12 family.

RFQ Liên hệ
R5F21152SP#U0 - 16-Bit 20MHz MCU | Renesas Electronics
R5F21152SP#U0

R5F21152SP#U0 - 16-Bit 20MHz MCU | Renesas Electronics

Renesas Electronics R5F21152SP#U0 is a 16-bit R8C microcontroller IC operating at up to 20 MHz, with 8 KB of flash memory organized as 8K x 8 and housed in a 20-pin LSSOP package. The device supports 3 V to 5 V operation and uses the R8C/Tiny-series CPU core. A microcontroller is a semiconductor that integrates a processor core, program memory, data memory, and peripherals into one device dedicated to embedded control. The R5C family belongs to the broader hierarchy of embedded processors and microcontrollers, allowing one compact component to execute control logic and manage digital interfaces, timing, communications, and system inputs. The R5F21152SP#U0 combines a 16-bit processing architecture with a 20 MHz operating speed and 8 KB of flash memory. Its 3 V to 5 V operating range supports both lower-voltage and 5 V industrial or consumer equipment. The 20-pin LSSOP outline offers a gull-wing, surface-mount format with a body width of approximately 4.40 mm, making it suitable for compact embedded-control boards. The R5C is a high-performance CISC core with an instruction set designed for efficient embedded operation and uses a silicon-gate CMOS process. Compared with a general-purpose processor, the device concentrates control-oriented functions into a smaller package, reducing the number of external components needed for basic sequencing, signal handling, and programmable logic tasks. Typical uses include industrial controllers, sensor-conditioning systems, motor-control interfaces, appliance control boards, and compact data-acquisition products. A designer can select the R5F21152SP#U0 when an application requires a 16-bit control architecture, 20 MHz performance, 8 KB of embedded flash, and a compact 20-pin package. Before finalizing the PCB, verify the complete pin assignment, clock configuration, programming interface, and external-component requirements against the manufacturer datasheet. Pay particular attention to supply decoupling and unused-pin handling, because correct implementation at these constraints is essential for reliable operation and repeatable firmware behavior. This page combines the core R5F21152SP#U0 specifications, package characteristics, sourcing guidance, and drop-in replacement analysis to support faster engineering decisions. It also highlights what must be checked when considering a substitute, particularly pin compatibility, flash capacity, operating voltage, clock rate, and peripheral configuration.

RFQ Liên hệ
R5F21153SP#U0 - 16-Bit 20MHz R8C MCU | Renesas Electronics
R5F21153SP#U0

R5F21153SP#U0 - 16-Bit 20MHz R8C MCU | Renesas Electronics

Renesas Electronics R5F21153SP#U0 is a 16-bit R8C/Tiny Series microcontroller operating at up to 20 MHz, with 12 KB of Flash memory and 768 bytes of RAM, packaged in a 20-pin plastic molded LSSOP. Designed for compact embedded control systems, it combines a high-performance silicon gate CMOS implementation with an efficient instruction set and a 10-bit A/D converter. A microcontroller is a programmable system-on-chip that integrates a CPU, memory, peripherals, and input/output circuitry into one package. The R8C/Tiny Series core belongs to the broader hierarchy of embedded processors, microcontrollers, and semiconductor devices. It provides a compact implementation for industrial controls, sensor interfaces, appliances, instrumentation, and other applications requiring low-cost local processing. The R5F21153SP#U0 operates from a 3 V or 5 V supply and provides 12 KB of program Flash plus 768 bytes of RAM. Its 10-bit A/D converter supports analog measurements required by sensor and control systems. The 20-pin LSSOP package reduces board area compared with larger leaded packages, although its narrow lead pitch requires careful PCB layout and manufacturing controls. The device uses Renesas high-performance silicon gate CMOS technology and the R8C/Tiny Series CPU core. Sophisticated instructions improve execution efficiency, while the integrated Flash, RAM, analog conversion, and serial I/O support a compact embedded design without requiring several external devices. Typical system benefits include lower component count, reduced board area, and deterministic peripheral control. R5F21153SP#U0 is particularly suitable for small control panels, temperature-measurement equipment, motor and actuator controllers, simple instrument interfaces, and appliance control boards. The analog inputs can measure potentiometers, resistive sensors, and other slowly varying signals when paired with suitable external conditioning circuitry. For PCB implementation, place the decoupling capacitor at the supply pins with the shortest possible trace, maintain clearances appropriate for the LSSOP lead pitch, and route analog inputs away from switching nodes. Confirm oscillator, reset, programming, and peripheral configurations in the manufacturer datasheet before releasing production artwork. This page consolidates the Renesas product information, distributor identification, lifecycle guidance, and application-focused design guidance for engineers evaluating the R5F21153SP#U0. Renesas supports this R8C/15 device for customers that previously adopted it and recommends the RL78/G12 Group for new designs.

RFQ Liên hệ
R5F21154SP#U0 - 16-Bit 20MHz Flash MCU | Renesas Electronics
R5F21154SP#U0

R5F21154SP#U0 - 16-Bit 20MHz Flash MCU | Renesas Electronics

Renesas Electronics R5F21154SP#U0 is a 16-bit R8C/1x/15 flash microcontroller operating at up to 20 MHz with 16 KB of internal flash memory and a 20-pin LSSOP package. The device uses the R8C/Tiny Series CPU core, provides a 1 MB address space, and operates from a 3 V to 5 V supply according to the distributor and manufacturer information provided. Its flash version supports programming from a single power source, making it suitable for compact embedded-control designs that require deterministic 16-bit processing and on-chip program storage. A microcontroller is a semiconductor device that integrates a CPU core, memory, and peripheral functions into one package. The R8C/15 belongs to the R8C family of 16-bit embedded controllers, combining an embedded CPU, flash program memory, and general-purpose I/O in a compact surface-mount device. This hierarchy places the part within embedded processing while keeping the external component count and board area below that of a discrete processor design. Key verified features include a maximum operating frequency of 20 MHz, 16 KB organized as 16K x 8 flash, 16-bit CPU architecture, 1 MB memory space, 3 V to 5 V operation, and a 20-pin LSSOP package. The high-performance silicon gate CMOS process supports an efficient implementation, while single-power-source flash programming simplifies production programming and field firmware updates. The package is identified by distributor sources as 20-LSSOP, also described elsewhere as a 20-pin plastic molded LSSOP. Typical uses include compact industrial controllers, appliance-control boards, sensor-conditioning equipment, communication modules, and small consumer products. The 20 MHz R8C core provides useful processing headroom for protocol handling, state-machine control, and supervisory logic, while the integrated 16 KB flash eliminates a separate program-memory component in suitable designs. When designing around this MCU, verify the complete pin assignments, peripheral mix, and electrical limits in the Renesas datasheet before finalizing the PCB. Pay particular attention to supply decoupling, programming interface requirements, clock configuration, and unused-pin handling. Existing firmware should also be checked for clock, timer, and memory-map assumptions before replacing another MCU. This page consolidates verified distributor specifications, manufacturer product information, package details, sourcing links, and replacement guidance. It distinguishes the electrically and mechanically verified R5F21154SP family option from unverified substitutes so engineers can make a conservative, footprint-aware decision.

RFQ Liên hệ
R5F21162SP#U0 - 16-Bit 20MHz MCU | Renesas Electronics
R5F21162SP#U0

R5F21162SP#U0 - 16-Bit 20MHz MCU | Renesas Electronics

Renesas Electronics R5F21162SP#U0 is a 16-bit R8C-series microcontroller operating at 20 MHz with 8 KB of flash memory in a 20-pin LSSOP package. Its 3/5 V operating class and 2.7 V to 5.5 V supply range make it appropriate for embedded control systems operating from standard low-voltage rails. The R8C/1x/16 architecture combines a compact 16-bit instruction set with dedicated microcontroller peripherals, making the device suitable for control, monitoring, signal processing, and communication-oriented designs. A microcontroller is an integrated semiconductor containing a processor core, program memory, data memory, timers, serial interfaces, and I/O circuitry on one package. Within the broader semiconductor hierarchy, the R5F21162SP#U0 belongs to the embedded-processing category and uses the R8C family of 16-bit microcontroller ICs. This integration reduces the component count required for a standalone controller while keeping the design centered on programmable firmware rather than fixed hardware logic. Three primary characteristics define this device: a 16-bit CPU, a 20 MHz operating frequency, and 8 KB of flash program memory. The 20 MHz clock provides useful processing headroom for responsive control loops and interrupt-driven tasks, while flash retains firmware when power is removed. The package is identified as 20-LSSOP, also marketed as 20-SSOP in distributor listings, and the lead-free marking identifies a Pb-free production configuration. The R5F21162SP#U0 is positioned for compact embedded systems where a small package, low-voltage operation, and dedicated microcontroller resources are more important than the storage capacity or peripheral scale of a high-end application processor. Its 8 KB flash capacity is best suited to firmware with tightly bounded functionality, such as dedicated appliance controllers, simple sensor nodes, industrial control modules, and compact peripheral interfaces. Typical design work involves assigning the available digital and analog functions, establishing a stable clock and reset path, and implementing firmware around the R8C core. Brownout monitoring, watchdog behavior, and power-consumption requirements should be evaluated in the final system because operating modes and firmware execution can materially affect the power budget. The principal layout consideration is the 20-LSSOP footprint, whose closely spaced leads demand careful track routing and reliable solder bridging control. Follow the pin-description and land-pattern tables in the manufacturer datasheet when assigning ports, supply pins, reset, clock, and programming signals. Confirm startup behavior and firmware timing with the configured operating frequency rather than treating the maximum clock rate as an automatic system setting. This page combines the exact ordering information, package identity, operating-class details, memory configuration, and practical design considerations for engineers evaluating the R5F21162SP#U0 in a new embedded-control design.

RFQ Liên hệ
R5F21163SP#U0 - 16-Bit R8C MCU, 12KB Flash | Renesas
R5F21163SP#U0

R5F21163SP#U0 - 16-Bit R8C MCU, 12KB Flash | Renesas

The Renesas Electronics R5F21163SP#U0 is a 16-bit R8C/Tiny Series microcontroller with a 2.7 V to 5.5 V operating range, 12 KB of flash memory, and a 20-pin plastic molded LSSOP package. It is built with a high-performance silicon-gate CMOS process and uses the R8C/Tiny Series CPU core to provide instruction-efficient embedded control. A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, and peripherals into one compact device. The R8C/Tiny architecture belongs to the broader microcontroller hierarchy, where a general-purpose processor core is combined with embedded resources for control-oriented products. Its 16-bit architecture and compact package make the R5F21163SP#U0 suitable for industrial equipment, appliance controls, sensor interfaces, and compact automation modules. The R5F21163SP#U0 combines a 16-bit CPU core, 12 KB flash program memory, and a 3 V/5 V operating class in a 20-pin LSSOP package. The 2.7 V to 5.5 V operating range allows operation across common 3.3 V and 5 V systems. A lead-free 20-SSOP form factor also supports conventional surface-mount manufacturing and compact PCB layouts. Renesas describes the device as using sophisticated instructions developed for high instruction efficiency. The R8C/Tiny Series core is suitable for embedded products that need more control than a simple logic device but do not require the resources of a general-purpose application processor. The silicon-gate CMOS process provides the manufacturing foundation for the integrated low-power control functions. Typical applications include industrial control panels, motor and machine controllers, building equipment, appliance interfaces, and compact sensor nodes. The 20-pin package limits external connectivity, so projects requiring many I/O pins, high-speed communications, or large memory capacities should be evaluated against other members of the Renesas portfolio. The R8C/16 Group is positioned for continued support of existing designs rather than broad adoption in new projects. When designing around this MCU, preserve the voltage limits of every connected signal and decouple each applicable supply rail close to the device. Review the pin-description table in the manufacturer datasheet before assigning board functions because package availability alone does not establish pin compatibility. Firmware, peripheral configuration, startup behavior, and software tools should also be reviewed against the target revision. This product page combines the manufacturer’s device description with focused engineering guidance for sourcing, PCB implementation, lifecycle planning, and family selection. It also distinguishes true pin-compatible options from devices that merely share a similar package or memory size, helping engineers avoid replacements that require firmware, board, or connector changes.

RFQ Liên hệ
R5F21164SP#U0 - 16-Bit 20MHz Flash MCU | Renesas
R5F21164SP#U0

R5F21164SP#U0 - 16-Bit 20MHz Flash MCU | Renesas

Renesas Electronics R5F21164SP#U0 is a 16-bit R8C/1x/16 embedded microcontroller operating at up to 20 MHz, with 16 KB of flash memory and a 20-pin plastic molded LSSOP package. It operates from 3 V to 5 V and is built with a high-performance silicon gate CMOS process. These characteristics position it for compact embedded control, monitoring, communications, and general-purpose industrial designs that require efficient 16-bit instruction execution and integrated nonvolatile program memory. A microcontroller is a semiconductor device that combines a processor core, memory, and peripherals on one integrated circuit. In the product hierarchy, the R5F21164SP#U0 is an MCU, part of the broader embedded-processing and semiconductor category. Its R8C CPU core supports compact, instruction-efficient control software, while flash memory permits the programmed firmware to remain resident without an external memory chip. The 20-LSSOP package also keeps the footprint suitable for space-constrained boards. The device's principal specifications include a 16-bit R8C/1x/16 core, a 20 MHz maximum operating frequency, 16 KB of internal flash memory, and a 3 V to 5 V operating supply. Renesas describes the R8C/16 group as a non-promotion series supported for customers that previously adopted these products, with the RL78/G12 group recommended for new designs. This makes the MCU particularly relevant to maintenance and lifecycle-extension programs for established R8C platforms rather than first-generation greenfield projects. The R8C architecture emphasizes instruction efficiency and provides a practical balance between processing capability, memory organization, and low-cost embedded integration. Flash-programmable firmware storage simplifies field updates and avoids the need for a parallel external program-memory device in designs that fit within the internal memory capacity. The silicon gate CMOS process supports integration of the CPU, memory, and control peripherals in a compact molded package suitable for industrial electronics. Typical applications include industrial control panels, small motor and actuator controllers, sensor-interface nodes, programmable instruments, communication modules, and compact consumer or building-control products. In these systems, the MCU can execute control logic, monitor digital and analog inputs, manage outputs, and coordinate communications through its integrated peripherals. Its small package also helps reduce board area when compared with larger microcontroller packages. Designers should begin by checking the complete peripheral allocation, interrupt structure, memory map, and electrical limits in the manufacturer datasheet before assigning pins or designing the PCB. The 20-pin package constrains the number of simultaneously available I/O functions, so multiplexed peripheral assignments and board-level interface requirements deserve early validation. Software compatibility with existing R8C tools and established firmware should also be confirmed during component planning. This product page consolidates the manufacturer positioning, distributor identification, package information, verified operating characteristics, and practical selection guidance for engineers maintaining R8C-based equipment. It also distinguishes legacy-support considerations from the manufacturer's recommendation for RL78/G12 in new designs, helping procurement and engineering teams make an informed decision without confusing a functional MCU alternative with a verified pin-compatible replacement.

RFQ Liên hệ
R5F21172SP#U0 - 16-Bit 20MHz MCU, 8KB Flash | Renesas
R5F21172SP#U0

R5F21172SP#U0 - 16-Bit 20MHz MCU, 8KB Flash | Renesas

Renesas Electronics R5F21172SP#U0 is a 16-bit R8C/1x/17-series microcontroller operating at up to 20 MHz with 8 KB of flash memory in a 20-pin plastic molded LSSOP package. It uses the R8C/Tiny Series CPU core, is manufactured using a high-performance silicon gate CMOS process, and operates from a 3 V to 5 V supply according to its distributor product classification. A microcontroller is a programmable semiconductor that combines a CPU core, memory, peripheral interfaces, and control logic on one integrated circuit. The R8C family is designed for embedded control applications where compact code size, deterministic operation, low-power peripheral handling, and efficient 16-bit instruction processing are important. The R5F21172SP#U0 belongs to the R8C/17 group, which Renesas positions primarily for customers that have already adopted these products; the manufacturer recommends the RL78/G12 group for new designs. The device combines a 20 MHz maximum clock frequency with 8 KB, or 8K x 8 bits, of flash program memory. Its R8C/Tiny Series core uses a sophisticated CISC-style instruction set intended to improve execution efficiency. The 20-pin LSSOP format provides a relatively compact surface-mount package for embedded systems requiring digital control, serial communication, timing, and discrete input or output handling. The main architectural consideration is the balance between processing capability and resource constraints. At 20 MHz, the core supports responsive control-loop execution, while the 8 KB flash capacity constrains firmware size and encourages efficient peripheral integration. Because the R8C/17 group is a non-promotion family, engineers should avoid expanding its use in newly designed platforms unless an existing product lineage and software ecosystem justify continuing with it. Typical uses include compact industrial controllers, sensor-conditioning systems, appliance-control modules, programmable timers, and embedded serial-control equipment. A designer can use the MCU to coordinate analog front ends, digital sensors, communication peripherals, and actuator outputs while keeping the assembly small enough for a 20-pin surface-mount footprint. Design work should account for the limited 8 KB program space, the 3 V to 5 V operating range, and the vendor's non-promotion position. Firmware should be sized before PCB layout, and the selected development toolchain and peripheral configuration should be checked against the R8C/17 family documentation. Renesas directs new-product development toward the RL78/G12 group. This product overview consolidates the confirmed processor, memory, speed, voltage, package, and lifecycle information with design guidance, sourcing questions, and alternative-selection considerations. It also highlights the practical distinction between maintaining an existing R8C/17 design and selecting a currently recommended MCU platform for a new project.

RFQ Liên hệ
R5F21174SP#U0 - 16-Bit 20MHz MCU, 16KB Flash | Renesas
R5F21174SP#U0

R5F21174SP#U0 - 16-Bit 20MHz MCU, 16KB Flash | Renesas

The Renesas Electronics R5F21174SP#U0 is a 16-bit R8C/Tiny Series microcontroller with a 20 MHz operating frequency, 16 KB of flash program memory, and 15 I/O ports, housed in a 20-pin plastic molded LSSOP package. It is designed for compact embedded-control systems requiring efficient instruction execution, broad I/O access, and operation from a 3.0 V to 5.5 V supply range. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripheral interfaces on one die. The R8C/17 Group belongs to Renesas's R8C/Tiny Series family of 16-bit embedded processors. Its architecture emphasizes instruction efficiency, making it useful for industrial controls, instruments, appliances, and compact automation products where deterministic control, modest memory requirements, and low component count are important. The R5F21174SP#U0 is aimed at systems already based on the R8C/17 platform. The device combines a 20 MHz R8C/Tiny CPU core with 16 KB of flash memory organized as 16K x 8 and 15 general-purpose I/O ports. The 3.0 V to 5.5 V operating range permits use in both 3.3 V and 5 V equipment. Its 20-pin LSSOP outline measures approximately 4.40 mm by 6.50 mm with a 0.65 mm lead pitch, supporting compact PCB layouts while preserving readily inspectable lead spacing. The manufacturer identifies the silicon implementation as high-performance silicon-gate CMOS. Renesas classifies this R8C/17 Group as supported for customers that have already adopted these products, while recommending the RL78/G12 Group for new designs. Consequently, R5F21174SP#U0 is primarily a continuation choice for established products rather than a preferred platform for greenfield development. Before extending an existing design, confirm software-tool support, peripheral availability, timing, and lifecycle plans against the current Renesas documentation. Typical applications include compact industrial controllers, sensor-conditioning systems, laboratory instruments, appliance control boards, data-acquisition modules, and embedded automation products. The small package, 16-bit processing capability, and moderate flash capacity make the MCU practical for single-board products with moderate computation and modest firmware size. A migration to another MCU may require changes to the startup code, peripheral configuration, memory map, and board layout. When designing around this MCU, reserve every supply pin for adequate decoupling and route high-current outputs carefully. Confirm oscillator, reset, and I/O constraints against the manufacturer datasheet before finalizing the PCB. Because this member is not promoted for new R8C/17 designs, evaluate lifecycle continuity and toolchain availability before committing to a new production program. This product page combines the manufacturer device characteristics, package information, lifecycle position, and a focused comparison of the closest identified same-package alternatives. It also adds selection guidance for maintaining an existing R8C/17 design while highlighting the need to verify pin, peripheral, and software compatibility before any substitution.

RFQ Liên hệ
R5F21181SP#U0 - 16-Bit 20MHz R8C MCU, 4KB Flash | Renesas
R5F21181SP#U0

R5F21181SP#U0 - 16-Bit 20MHz R8C MCU, 4KB Flash | Renesas

The Renesas Electronics R5F21181SP#U0 is a 16-bit R8C/1x series microcontroller IC with a 20 MHz R8C CISC core, 4 KB (4K x 8) flash program memory and 384 x 8 bytes of internal SRAM, supplied in a compact 20-pin LSSOP (PLSP0020JB-A) package. It runs from a single 2.7 V to 5.5 V supply over an industrial -20 °C to +85 °C ambient range, and is supplied lead-free in tube packaging. A microcontroller is a complete control computer on a single chip: a CPU core, program memory, data memory, and dedicated peripherals such as timers, serial ports, comparators and watchdog logic. The R8C core family sits in the 16-bit embedded control tier, above 8-bit MCUs in arithmetic throughput while remaining far simpler and lower cost than 32-bit Cortex-M devices. R8C parts use a compact 16-bit instruction set with 16-bit register architecture and rich register-mapped peripherals. Key features of the R5F21181SP#U0 include the 20 MHz operating frequency, 4 KB of on-chip flash for firmware storage, 384 bytes of SRAM for working data, four on-chip comparators, a watchdog timer (WDTO), and SIO plus UART/USART serial connectivity. The device also carries integrated peripheral functions typical of small control systems, and the 20-pin LSSOP outline keeps the footprint only 4.4 mm wide. Technically, the part belongs to the R8C/18 group, a group whose members share identical peripheral sets, with the notable characteristic of an integrated 4-channel comparator and watchdog timer. The core executes from flash with a 16-bit data path, delivering enough throughput for motor sequencing, sensor conditioning loops, front-panel control and simple protocol handling without an external coprocessor. Typical uses include small appliance controllers, sensor and security modules, office and housing equipment, industrial sub-assemblies, and audio equipment control panels, where the low pin count, wide supply range and embedded comparators reduce the external component count. When designing around this part, keep the supply within 2.7 V to 5.5 V, decouple VCC close to the pin with a 0.1 uF plus 1 uF ceramic pair, and reserve the 20-pin footprint only if the LSSOP (PLSP0020JB-A) land pattern is already committed on the PCB. This page combines distributor pricing, verified distributor and manufacturer listings, pin-compatible drop-in alternatives from the same R8C family, and practical design notes that are not found on standard distributor product pages.

RFQ Liên hệ
R5F21182NP#U0 - 16-Bit 20MHz MCU | Renesas Electronics
R5F21182NP#U0

R5F21182NP#U0 - 16-Bit 20MHz MCU | Renesas Electronics

Renesas Electronics R5F21182NP#U0 is a 16-bit R8C microcontroller with an operating frequency of up to 20 MHz, 8 KB (8K x 8) flash program memory, and a 28-HWQFN surface-mount package measuring 5 mm by 5 mm. The device is specified for 3 V to 5 V operation, includes 13 I/O pins, and is supplied in tube packaging according to the verified distributor data. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, data memory, peripherals, and I/O into one package. The R5F21182NP#U0 belongs to the R8C/1x family of 16-bit single-chip microcomputers. This product hierarchy connects R8C CPU core devices to embedded control solutions in which compact size, deterministic control, and embedded code execution are more important than a high-pin-count host processor architecture. The primary verified features include a 16-bit R8C CPU core, 20 MHz maximum speed, 8 KB flash memory, 512 bytes of RAM, 13 I/O pins, an internal oscillator, and a 28-HWQFN package. The Mouser listing describes the device as a 3 V/5 V, Pb-free microcontroller, while the Renesas product page identifies it as an R8C/1x member in the Non Promotion category. These details position the part for compact embedded-control designs requiring moderate code capacity and modest external-interface requirements. The R8C architecture supports embedded applications where firmware-driven sequencing, control, and communication tasks must be handled by a dedicated device. Its 20 MHz operating speed provides greater timing headroom than slower general-purpose 8-bit alternatives, while 8 KB of flash gives firmware designers room for a bootloader, calibration logic, state machines, and application-specific routines. The 512-byte RAM requirement should be evaluated carefully against the working data and stack needs of the final application. Typical uses include compact industrial controllers, sensor-interface modules, appliance-control boards, small motor-control subsystems, and low-cost embedded instruments. The 5 mm by 5 mm exposed-pad package can support compact board layouts, but thermal performance and exposed-pad soldering become important when the operating frequency, I/O activity, and ambient temperature combine to create sustained self-heating. Designers should verify the complete pin assignment, power architecture, peripheral mix, clock options, and programming procedure in the Renesas R5F21182NP datasheet before layout release. The verified snippets do not expose the detailed pin map, operating-temperature range, or recommended PCB land pattern, so those items require confirmation rather than inference. This product page consolidates verified distributor specifications, current purchasing information, same-family replacement candidates, and practical selection guidance into one engineering-oriented reference. It also distinguishes confirmed values from data that remains to be checked in the manufacturer documentation.

RFQ Liên hệ
R5F21182SP#U0 - 16-Bit 20MHz R8C MCU, 8KB Flash | Renesas
R5F21182SP#U0

R5F21182SP#U0 - 16-Bit 20MHz R8C MCU, 8KB Flash | Renesas

The Renesas Electronics R5F21182SP#U0 is a 16-bit R8C R8C/1x/18 microcontroller operating at up to 20 MHz, with 8 KB of flash program memory in a 20-pin LSSOP package. According to the Renesas product page and distributor records, the device supports a 3 V to 5 V operating range and is a lead-free component. A microcontroller is a programmable system-on-chip that combines a CPU core, program memory, data memory, peripheral interfaces, and clocking in one integrated circuit. The R8C R8C/1x/18 belongs to the Renesas R8C family, a 16-bit embedded-control platform positioned between simple 8-bit controllers and larger 32-bit application processors. The R5F21182SP#U0 is positioned for compact embedded-control tasks where modest flash capacity, a wide operating voltage, and a low-pin-count package are more useful than high-speed connectivity or large external memory interfaces. The verified device specification identifies an R8C/1x/18 core, 20 MHz maximum operating frequency, and 8 KB of flash memory. The program-memory organization is listed as 8K x 8. This combination supports compact control firmware, peripheral configuration, and protocol handling where the application does not require a large graphical interface or extensive data logging. The 20-LSSOP package also supports compact PCB layouts where a larger QFP or BGA option would be unnecessary. Renesas positions the R8C/18 and R8C/19 groups for appliances, office equipment, housing equipment, sensors, security systems, general industrial equipment, and audio equipment. Their peripheral functions are described as the same, with the principal group difference being the presence or absence of data flash ROM. This distinction is important when selecting a replacement because software assumptions about data-flash storage may not transfer directly between groups. For battery-powered or energy-constrained designs, engineers should evaluate the 3 V to 5 V operating range alongside actual quiescent current, active current, and peripheral configuration, because those values are not stated in the supplied source records. Supply decoupling, programming-tool compatibility, and firmware driver support should likewise be confirmed against the complete manufacturer documentation before a new design is released. This page combines the verified Renesas and distributor data with package-aware alternatives, application guidance, and design cautions. It also separates confirmed characteristics from parameters that require datasheet confirmation, helping engineers make sourcing decisions without confusing a similarly described R8C member with a qualified drop-in replacement.

RFQ Liên hệ
R5F21183SP#U0 - 16-Bit 20MHz R8C MCU | Renesas Electronics
R5F21183SP#U0

R5F21183SP#U0 - 16-Bit 20MHz R8C MCU | Renesas Electronics

Renesas Electronics R5F21183SP#U0 is a 16-bit microcontroller with an R8C/1x/18 CPU core, a 20 MHz operating speed, 12 KB of flash program memory, and 768 bytes of RAM. The device is supplied in a 20-pin LSSOP package and operates from 2.7 V to 5.5 V, with a documented operating-temperature range of -20°C to +85°C. Its internal oscillator and 13 general-purpose input/output pins support compact embedded-control designs without an external clock source. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working RAM, and peripheral functions onto one package. Within the product hierarchy, the R5F21183SP#U0 is an MCU, an embedded-processing IC, and a member of the R8C family of 16-bit devices. This classification distinguishes it from discrete logic, analog regulators, and communications transceivers while placing it within the broader embedded-control and industrial-control markets. The principal device characteristics are a 16-bit R8C/1x/18 architecture, 20 MHz maximum speed, and 12 KB (12K × 8) flash memory. The MCU also includes 768 × 8 bits of RAM and 13 I/O pins in a 20-LSSOP package rated across a 2.7 V to 5.5 V supply range. These figures make the part suitable for compact control systems where moderate processing throughput, deterministic peripheral control, and limited board area are more important than large embedded flash capacities. The R8C core provides a 16-bit processing architecture suitable for embedded tasks involving control logic, state machines, communication routines, and peripheral coordination. Flash program memory supports resident firmware, while the 768-byte RAM provides working space for variables, stacks, and intermediate data. The internal oscillator eliminates the need for a separate clock oscillator in designs whose timing requirements do not demand an external frequency source. Potential applications include compact industrial controllers, appliance and equipment control panels, sensor-processing modules, building-control terminals, and embedded peripheral controllers. A 20-pin package and 13 I/O pins make the device appropriate for designs where the firmware must coordinate several inputs and outputs while occupying little PCB area. The 2.7 V to 5.5 V operating range accommodates both 3 V and 5 V systems, although each peripheral and external-circuit requirement should be checked against the manufacturer documentation. The principal design consideration is to verify the complete pin assignment and peripheral multiplexing before layout. The 20-LSSOP land pattern provides limited routing area, so decoupling, programming access, oscillator requirements, and I/O contention must be planned before PCB release. Because the supplied search results identify this exact orderable variant as “Non Promotion,” production planning should confirm lifecycle status and availability directly with Renesas before committing a long-running design. This page consolidates the verified manufacturer and distributor facts, current price references, technical comparisons, and sourcing guidance for R5F21183SP#U0. It also distinguishes documented parameters from missing information, avoiding unsupported assumptions where complete electrical, timing, peripheral, and pin-level details were not present in the supplied sources.

RFQ Liên hệ
R5F21184DD#U0 - 16-Bit 20MHz R8C MCU | Renesas
R5F21184DD#U0

R5F21184DD#U0 - 16-Bit 20MHz R8C MCU | Renesas

Renesas Electronics R5F21184DD#U0 is a 16-bit R8C microcontroller operating at up to 20 MHz, with 16 KB of built-in Flash memory and 1 KB of RAM, in a 20-pin SDIP package. The device operates from 2.7 V to 5.5 V and supports a -20 °C to +85 °C temperature range. Its through-hole 20-SDIP package, specified at a 0.300-inch or 7.62 mm pitch, is intended for applications where conventional PCB assembly and socket compatibility are useful. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and input/output circuitry into one component. The R5F21184 belongs to the R8C/1x/18 product family and provides 13 I/O pins, allowing the target R8C CPU core to control external peripherals, acquire digital signals, and manage embedded-system tasks. The 16 KB Flash configuration provides on-chip program storage, while the 1 KB RAM supports working data and stack operations. The principal verified performance characteristics are a 16-bit CPU architecture, a 20 MHz operating frequency, 16 KB of built-in Flash, 1 KB of RAM, a 2.7 V to 5.5 V supply range, and 13 available I/O pins. The operating-temperature range of -20 °C to +85 °C supports use across commercial and industrial ambient conditions when the complete system is designed within the specified electrical limits. The R8C/1x/18 architecture is useful for compact embedded controllers that require more control than a simple logic device but do not need a high-end processor. Potential applications include industrial control, instrumentation, appliance control, data acquisition, and communication equipment. The target MCU's 20 MHz clock and 16-bit instruction set are suitable for coordinating real-time control loops and handling multiple peripheral functions without an external memory device. The through-hole SDIP-20 package simplifies prototyping, inspection, and repair compared with fine-pitch surface-mount packages. It also makes the device suitable for legacy control boards and socket-based assemblies, provided the board layout matches the Renesas R5F21184DD#U0 pin arrangement. Designers must verify the complete pin configuration, peripheral functions, clock requirements, and timing limits in the manufacturer datasheet before production release. This product data distinguishes verified distributor specifications from information requiring datasheet confirmation. Published pricing is $3.8098 per unit as of 2026-10-28, and the official Renesas product listing indicates that the R5F21184DD#U0 remains orderable. The detailed pinout, electrical timing, peripheral list, and memory map should be taken directly from the applicable R8C/1x/18 hardware documentation.

RFQ Liên hệ
R5F21184NP#U0 - 16-Bit R8C 16KB MCU | Renesas Electronics
R5F21184NP#U0

R5F21184NP#U0 - 16-Bit R8C 16KB MCU | Renesas Electronics

The Renesas Electronics R5F21184NP#U0 is a 16-bit R8C microcontroller with 16 KB of flash memory, a 20 MHz operating frequency, a 2.7 V to 5.5 V supply range, and a 28-pin HWQFN package. It belongs to the R8C/1x microcontroller family and is designed for embedded control applications requiring compact packaging, flash-backed firmware storage, and a mixed-signal peripheral set. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The R8C core is a compact CISC-based architecture used in embedded systems where deterministic control, low component count, and broad peripheral integration are important. Within the device hierarchy, the R5F21184NP#U0 is a 16-bit microcontroller, an embedded processor, and ultimately a semiconductor used to implement control logic for industrial, consumer, and communications equipment. The main device characteristics include 16-bit instruction processing, 16 KB of flash program memory, operation from 2.7 V to 5.5 V, and a 20 MHz maximum clock indication for the closely related R5F21184 family. The 28-pin HWQFN package supports a compact surface-mount footprint, while the 5 V-oriented operating range suits conventional embedded control systems. Its integrated architecture reduces the number of external components needed for basic sensing, timing, communications, and actuator-control functions. The R8C family architecture is intended for embedded applications that need more control capability than a simple 8-bit controller without moving immediately to a larger application processor. Flash memory allows firmware to be programmed for the finished product rather than relying on mask-programmed ROM. The combination of a 20 MHz clock, 16-bit CPU architecture, and mixed-signal peripherals supports responsive control loops while keeping software and hardware integration manageable. Typical uses include industrial control modules, sensor interfaces, motor and actuator controllers, household appliances, instrument panels, and low- to moderate-speed communications equipment. The device can also serve as the central controller in compact embedded products where a 28-pin package is preferred over larger leaded or high-pin-count alternatives. System-level selection should account for the exact peripheral mix, clock configuration, memory organization, and board-level requirements of the target design. Before laying out a PCB, use the manufacturer pin-description table and package drawing to assign every signal and preserve the exposed-pad connection specified for the HWQFN package. Keep supply and ground paths short, place decoupling capacitors near the device, and confirm the external crystal or clock-network requirements for the intended operating mode. Firmware development should follow the R8C hardware and application notes to preserve correct peripheral configuration and timing. This product page consolidates the essential R5F21184NP#U0 identity, electrical envelope, package information, application guidance, comparison fields, and sourcing questions into one engineering-focused reference. It also distinguishes documented device facts from parameters that require confirmation in the Renesas datasheet or product documentation before a new design is released.

RFQ Liên hệ
R5F21184SP#U0 - 16-Bit 20MHz R8C MCU | Renesas
R5F21184SP#U0

R5F21184SP#U0 - 16-Bit 20MHz R8C MCU | Renesas

The Renesas Electronics R5F21184SP#U0 is a 16-bit R8C microcontroller operating at up to 20 MHz, with 16 KB of flash program memory, in a 20-pin LSSOP package. The device operates from a 2.7 V to 5.5 V supply range and is identified as a 3 V and 5 V Pb-free MCU. Its four-channel comparator and watchdog-related functions make it useful for embedded control designs requiring local sensing, timing, and programmable digital I/O. An R8C microcontroller is a general-purpose embedded processor based on Renesas Electronics' R8C CPU core. Within the semiconductor hierarchy, it belongs to the microcontroller and embedded-control family rather than a dedicated analog or power-management device. The R8C/1x group combines a 16-bit architecture with flash-based firmware storage in compact packages intended for industrial controls, consumer equipment, instrumentation, and small automation systems. Key characteristics include a 20 MHz maximum operating frequency, 16-bit processing width, and 16 KB of flash memory. The 2.7 V to 5.5 V operating range allows use in both 3 V and 5 V systems. The integrated four-channel comparator can support threshold detection, signal conditioning, and basic sensor-interface functions without requiring a separate comparator IC for every measurement channel. The Pb-free package designation also supports sourcing plans that avoid lead in the component termination. The R8C/1x architecture is designed for compact embedded control rather than high-performance application processing. Firmware, peripheral configuration, and interrupt handling determine real-time behavior, while the 16 KB flash capacity places a firm boundary on program size. Engineers should treat memory availability as a design constraint and verify the complete device pin description, electrical limits, and peripheral allocation in the Renesas datasheet before finalizing firmware or board-level connections. Typical uses include small industrial controllers, sensor-conditioning modules, motor or valve supervisory circuits, programmable timers, and compact consumer-control boards. The comparator channels are particularly useful where analog thresholds must be evaluated beside digital control logic. Applications requiring extensive protocol stacks, large data storage, or high-resolution graphics remain better suited to microcontrollers with substantially more memory and peripheral resources. For PCB implementation, confirm the 20-pin LSSOP footprint and assign every power, ground, programming, reset, and signal connection according to the manufacturer's pin-description table. Place required decoupling capacitors close to the supply pins and provide a clean, low-impedance ground return. Because the exact exposed thermal-pad arrangement, programming interface, and complete peripheral allocation are not stated on the product listing, use the official datasheet during schematic and layout signoff. This page combines the principal R8C/1x specifications with practical sourcing, replacement, footprint, and design guidance. It also distinguishes the target ordering code from nearby Renesas variants, helping engineers confirm package, memory, voltage, and temperature requirements before committing a PCB or production BOM.

RFQ Liên hệ
R5F21191SP#U0 - 16-Bit 20MHz R8C MCU | Renesas Electronics
R5F21191SP#U0

R5F21191SP#U0 - 16-Bit 20MHz R8C MCU | Renesas Electronics

Renesas Electronics R5F21191SP#U0 is a 16-bit R8C/19 group microcontroller operating at up to 20 MHz, with 4 KB of Flash program memory and a 20-LSSOP package. The device supports nominal 3 V and 5 V operation, with an operating supply range of 2.7 V to 5.5 V according to the distributor listing. Its 384-byte internal RAM and integrated data flash make it suitable for compact embedded-control products requiring nonvolatile parameter storage. A microcontroller is a programmable semiconductor that combines a CPU core, memory, and peripherals on one integrated circuit. The R5F21191SP#U0 belongs to Renesas's R8C/1x family and uses the R8C/19 group. This places it in the hierarchy of embedded microcontroller, microcontroller, semiconductor, and programmable control device. The R8C architecture provides a 16-bit processing environment in a compact 20-pin surface-mount package intended for embedded systems. Verified distributor data identifies four on-chip comparators and a watchdog timer, while the family documentation describes data-flash ROM and the same peripheral functions across the R8C/18 and R8C/19 groups. The principal distinction between those groups is the presence or absence of data-flash ROM. These integrated features reduce external component requirements for threshold detection, timing supervision, and persistent configuration in compact appliances, sensors, security equipment, office equipment, and industrial products. The 20 MHz operating speed provides a practical balance between processing throughput, power consumption, and external-clock requirements. Its 4 KB Flash capacity supports embedded firmware for compact control loops, while the 384-byte RAM accommodates working variables and peripheral buffers. The listed operating temperature range of -20 °C to 85 °C supports consumer and general industrial environments where extended-temperature qualification is not required. Designers should preserve the 20-LSSOP footprint and verify the complete Renesas R8C/19 pin assignment before PCB release. The component is identified as Pb-free, but detailed RoHS, REACH, halogen-free, and conflict-minerals declarations were not present in the supplied verification data. Toolchain, peripheral, and electrical details should therefore be confirmed against the manufacturer documentation before production release. This page consolidates verified distributor specifications, source links, engineering applications, and a documented R8C/18-family cross-reference into a design-focused component record.

RFQ Liên hệ
R5F21192SP#U0 - 16-Bit 20MHz R8C MCU | Renesas Electronics
R5F21192SP#U0

R5F21192SP#U0 - 16-Bit 20MHz R8C MCU | Renesas Electronics

The Renesas Electronics R5F21192SP#U0 is a 16-bit R8C-series single-chip microcontroller operating at up to 20 MHz, with 8 KB of flash memory and a 20-pin molded-plastic LSSOP package. It operates from 2.7 V to 5.5 V, supporting both 3.3 V and 5 V system environments. The R5F21192SP belongs to the R8C/1x/19 device group and is offered in a tube-packaged configuration identified by the #U0 suffix. An R8C microcontroller is a single-chip embedded controller that combines a 16-bit CISC core, flash program memory, data memory, timers, serial interfaces, analog comparison functions, and I/O ports on one integrated circuit. The R8C core sits within Renesas's broader MCU hierarchy: R8C/Tiny Series CPU core, 16-bit microcontroller, embedded processing IC, and semiconductor. This combination makes the device suitable for compact control systems that require more computation than an 8-bit MCU without adopting a larger application-specific controller. The R5F21192SP#U0 provides an 8 KB flash-memory configuration, a 20 MHz maximum operating frequency, and a 2.7 V to 5.5 V supply range. A distributor listing identifies a 512 x 8 internal memory organization, while the device description also identifies DataFlash capability and a four-channel comparator. These resources allow firmware, peripheral configuration, and application logic to share one compact package. The device is fabricated using a high-performance silicon-gate CMOS process. The 20-pin PLSP0020JB-A LSSOP package supports conventional surface-mount assembly while providing a compact footprint for embedded products. The reported operating-temperature range is -20°C to 85°C. The R5F21192SP#U0 is presented by Renesas as a non-promotion product, so procurement planning should account for its non-promoted status and confirm availability before committing a new production design. Typical design roles include compact industrial controllers, sensor-conditioning systems, embedded measurement products, serial-interface equipment, and low-to-moderate-speed appliance controls. The 8 KB flash capacity is most appropriate for firmware with focused control logic, while the 16-bit R8C architecture can simplify arithmetic and register organization compared with an 8-bit implementation. PCB planning should preserve the LSSOP pad layout and route sensitive analog inputs away from switching nodes and high-current outputs. Decoupling capacitors should be placed close to the supply pins, while programming and serial-debug access must follow the device's recommended connection arrangement. Confirm pin assignments, clock requirements, and peripheral multiplexing in the manufacturer datasheet before final schematic release. This page consolidates the exact orderable MPN, manufacturer product identity, verified technical attributes, sourcing context, package information, and design-oriented selection guidance into one engineering reference. It also distinguishes true drop-in packaging alternatives from related R8C devices that differ in memory capacity or other functional parameters.

RFQ Liên hệ
R5F21192SP#W4 - 16-Bit 20MHz R8C MCU | Renesas
R5F21192SP#W4

R5F21192SP#W4 - 16-Bit 20MHz R8C MCU | Renesas

The Renesas Electronics R5F21192SP#W4 is a 16-bit R8C-family microcontroller operating at up to 20 MHz, with 8 KB of Flash program memory and 512 bytes of RAM in a 20-LSSOP package. It supports 3 V and 5 V operation, provides 13 general-purpose I/O pins, and is offered in a tape-and-reel configuration for automated production. A microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, working RAM, digital I/O, timers, and communication peripherals on one integrated circuit. The R5C/1x product family belongs to the broader hierarchy of embedded processors and controllers, 16-bit microcontrollers, R8C devices, and general-purpose semiconductor components. This combination gives a designer a compact control platform for products requiring deterministic embedded control rather than a desktop processor. The R5F21192SP#W4 provides 8 KB of Flash for firmware and 512 x 8 bits of data memory for operating variables and stack-related requirements. Its R8C CPU core supports a 20 MHz maximum clock, while an internal oscillator provides a clock source without requiring an external crystal. Thirteen I/O pins support digital interfaces, control signals, and peripheral connections. The 3 V to 5 V operating range makes the device suitable for mixed industrial and embedded control systems using conventional logic levels. The 20-LSSOP package measures approximately 4.40 mm in body width and uses a 0.173-inch lead pitch. It is narrower than a standard 20-SOIC outline but remains compatible with surface-mount assembly and reel-based manufacturing. The specified operating-temperature range is -20°C to +85°C, covering common commercial and industrial environments. The Pb-free marking identifies the lead-free configuration, while no other compliance claims should be inferred without additional manufacturer documentation. Typical applications include compact industrial controllers, sensor-conditioning systems, small motor-control modules, digital equipment, and embedded peripheral controllers. The 20 MHz R8C core is appropriate for coordinating inputs, timers, logic states, and communications while the 13 I/O pins connect external sensors and actuators. Compared with larger general-purpose microcontrollers, the device focuses on a smaller memory footprint and a modest I/O count, allowing lower-cost PCB layouts when those resources are sufficient. Designers should confirm every signal voltage against the 3 V and 5 V operating capability and confirm the 13-I/O allocation for the selected device configuration. Decoupling, programming-interface connections, reset behavior, and unused-pin treatment should follow the Renesas R5F21192 datasheet. The narrow LSSOP footprint also requires assembly planning because fine-pitch leads can increase solder-joint inspection and rework difficulty. This page combines the exact R5F21192SP#W4 ordering designation with verified memory, speed, voltage, temperature, package, and I/O characteristics, plus practical selection guidance and compatibility analysis. The comparison and replacement sections focus on same-package options that can be validated rather than presenting unrelated microcontrollers as drop-in replacements.

RFQ Liên hệ
R5F21193SP#U0 - 16-Bit 20MHz MCU, 12KB Flash | Renesas
R5F21193SP#U0

R5F21193SP#U0 - 16-Bit 20MHz MCU, 12KB Flash | Renesas

Renesas Electronics R5F21193SP#U0 is a 16-bit R8C-series microcontroller with 12KB of flash program memory, 768 bytes of RAM, 13 general-purpose I/O pins, and a 20 MHz maximum operating frequency. The device operates from 3 V to 5 V and is supplied in a 20-pin LSSOP package measuring 0.173 inches, or 4.40 mm, in width. Its non-promotion ordering designation identifies the #U0 configuration. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, digital I/O, and embedded peripherals on one integrated circuit. In the product hierarchy, the R5F21193SP#U0 belongs to the Renesas R8C/19 group of 16-bit microcontrollers. The R8C core provides a compact embedded-control platform for consumer appliances, office equipment, sensor systems, security equipment, industrial products, and audio equipment. Key verified features include 12KB of flash memory, 768 x 8 bits of RAM, 13 I/O pins, a 20 MHz speed rating, and internal oscillator support. The 3 V to 5 V operating range allows the device to share power infrastructure with common embedded systems while retaining compatibility with lower-voltage logic designs. The 20-LSSOP package supports conventional surface-mount assembly and offers a narrow PCB footprint compared with larger leaded packages. The R8C/19 family is designed for compact embedded-control tasks that require deterministic peripheral control without a high-cost external processor. Flash memory retains programmed application code when power is removed, while the 768-byte RAM supports working variables, stack operations, and intermediate data processing. The 13 available I/O pins can be allocated among digital inputs, outputs, serial functions, and external control signals according to the device configuration and peripheral multiplexing requirements. Typical uses include household appliance control, office equipment, sensor interfaces, security systems, industrial equipment, and audio products. Product teams should verify the exact peripheral allocation, reset behavior, clock configuration, electrical limits, and programming requirements against the Renesas R5F21193SP datasheet before releasing a PCB or production firmware. The principal design consideration is package and software continuity. Because this is a 20-pin LSSOP MCU, board layouts, assembly tooling, and firmware settings may differ from otherwise similar 16-bit devices. Engineers should use the manufacturer pin assignment and reference design information rather than assuming compatibility based only on flash size or operating voltage. This page consolidates verified distributor specifications, current purchasing information, package information, and application guidance. It also identifies the absence of manufacturer-confirmed drop-in substitutes rather than presenting merely similar microcontrollers as guaranteed replacements.

RFQ Liên hệ
R5F21194DD#V0 - 20MHz 16-Bit Flash MCU | Renesas
R5F21194DD#V0

R5F21194DD#V0 - 20MHz 16-Bit Flash MCU | Renesas

Renesas Electronics R5F21194DD#V0 is a 16-bit R8C/Tiny Series microcontroller with a 20 MHz operating speed, 16 KB of Flash program memory, 1 KB of RAM, and 13 general-purpose I/O pins in a 20-pin SDIP package. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. The R8C/1x/19 belongs to the R8C family of 16-bit embedded processors and is positioned above basic 8-bit controllers for compact systems that require efficient control, moderate computational throughput, and low-cost integration. The verified device data identifies a 16 KB program memory organized as 16K x 8, a 1K x 8 RAM organization, and a maximum operating speed of 20 MHz. It uses an internal oscillator and provides 13 I/O pins. These characteristics make the R5F21194DD#V0 appropriate for appliance controls, small industrial controllers, sensor interfaces, and compact embedded products where a 20-pin through-hole package simplifies assembly and inspection. Renesas describes the R8C/1x/19 family as being fabricated with a high-performance silicon-gate CMOS process and built around the R8C/Tiny Series CPU core. The family also provides 20-pin molded-plastic LSSOP and SDIP versions and a 28-pin plastic-molded HWQFN version. Exact interrupt, timer, serial-interface, supply-voltage, and peripheral details must be confirmed in the device-specific datasheet before schematic capture. Typical design opportunities include motor-sequence controllers, temperature-monitoring instruments, simple industrial interfaces, programmable logic controllers, and low-cost embedded control modules. The 16 KB Flash capacity provides room for application code, while the 1 KB RAM supports working variables, stack activity, and intermediate data. The 13 I/O pins allow external sensors, switches, indicators, and actuators to be connected without an external I/O expander. Designers should verify operating-voltage limits, clock behavior, peripheral pin assignments, reset requirements, and programming procedures against the manufacturer datasheet. Since this 20-SDIP variant uses through-hole leads, component height, soldering temperature, wave-solder compatibility, and mechanical clearance should also be reviewed before high-volume production. This page combines verified distributor specifications, package and memory details, lifecycle guidance, practical design considerations, and same-package replacement analysis. It distinguishes documented facts from parameters that still require device-specific datasheet verification, helping engineers make an informed sourcing or design decision.

RFQ Liên hệ