Vi điều khiển

Sản phẩm (20.000+)

STM32F072RBT7 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics
STM32F072RBT7

STM32F072RBT7 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F072RBT7 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 128 KB of embedded Flash memory and a 64-LQFP 10 mm × 10 mm package. The verified distributor data identifies USB, CAN, a 2.5 V or 3.3 V supply context, and 64 pins. These characteristics place it in the STM32F0 family of low-complexity embedded microcontrollers for compact control, connectivity, and industrial designs. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and I/O into one embedded-control platform. The STM32F0 series belongs to the ARM Cortex-M microcontroller hierarchy and combines a low-complexity 32-bit instruction set with dedicated communication and timing peripherals. This makes the STM32F072RBT7 suitable for systems that need deterministic control without a higher-performance application processor. The STM32F072RBT7 combines a 48 MHz ARM Cortex-M0 core with 128 KB of Flash. Verified distributor records also identify USB and CAN connectivity, which can reduce the need for external interface controllers in connected equipment. Its 64-LQFP package provides 64 physical pins and is suitable for through-hole assembly or mixed-technology PCB layouts where a fine-pitch BGA package would be unnecessary. The available evidence confirms a mainstream STM32F0-series product with USB and CAN support, 128 KB Flash, and operation up to 48 MHz. Detailed peripheral assignments, SRAM capacity, voltage limits, pin functions, bootloader behavior, and electrical timing values are not included in the supplied verified data. Those parameters must be confirmed in the manufacturer datasheet before final schematic or firmware release. Typical uses include USB-connected control accessories, CAN-based industrial nodes, compact motor and actuator controllers, sensor-hub boards, and general embedded products where a 32-bit ARM Cortex-M0 MCU is sufficient. The 64-LQFP package is particularly useful when production teams prefer visible solder joints and straightforward inspection. The main design consideration is interface assignment. USB, CAN, oscillators, reset, programming pins, and general-purpose I/O must be mapped against the manufacturer pinout and application requirements before PCB routing. Firmware support, clock configuration, transceiver requirements, and USB or CAN bus protection are outside the supplied data and should be verified against the official documentation. This page consolidates verified manufacturer and distributor information, technical search coverage, pricing context, and design-oriented interpretation. It does not infer undocumented electrical values, and it distinguishes confirmed specifications from data that still requires engineer verification.

RFQ Liên hệ
STM32F072RBT7TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)
STM32F072RBT7TR

STM32F072RBT7TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F072RBT7TR is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 128 KB of embedded Flash memory and a 64-LQFP 10 mm × 10 mm package. The verified distributor data identifies USB, CAN, a 2.5 V or 3.3 V supply context, and 64 pins. These characteristics place it in the STM32F0 family of low-complexity embedded microcontrollers for compact control, connectivity, and industrial designs. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and I/O into one embedded-control platform. The STM32F0 series belongs to the ARM Cortex-M microcontroller hierarchy and combines a low-complexity 32-bit instruction set with dedicated communication and timing peripherals. This makes the STM32F072RBT7TR suitable for systems that need deterministic control without a higher-performance application processor. The STM32F072RBT7TR combines a 48 MHz ARM Cortex-M0 core with 128 KB of Flash. Verified distributor records also identify USB and CAN connectivity, which can reduce the need for external interface controllers in connected equipment. Its 64-LQFP package provides 64 physical pins and is suitable for through-hole assembly or mixed-technology PCB layouts where a fine-pitch BGA package would be unnecessary. The available evidence confirms a mainstream STM32F0-series product with USB and CAN support, 128 KB Flash, and operation up to 48 MHz. Detailed peripheral assignments, SRAM capacity, voltage limits, pin functions, bootloader behavior, and electrical timing values are not included in the supplied verified data. Those parameters must be confirmed in the manufacturer datasheet before final schematic or firmware release. Typical uses include USB-connected control accessories, CAN-based industrial nodes, compact motor and actuator controllers, sensor-hub boards, and general embedded products where a 32-bit ARM Cortex-M0 MCU is sufficient. The 64-LQFP package is particularly useful when production teams prefer visible solder joints and straightforward inspection. The main design consideration is interface assignment. USB, CAN, oscillators, reset, programming pins, and general-purpose I/O must be mapped against the manufacturer pinout and application requirements before PCB routing. Firmware support, clock configuration, transceiver requirements, and USB or CAN bus protection are outside the supplied data and should be verified against the official documentation. This page consolidates verified manufacturer and distributor information, technical search coverage, pricing context, and design-oriented interpretation. It does not infer undocumented electrical values, and it distinguishes confirmed specifications from data that still requires engineer verification.

RFQ Liên hệ
STM32F072V8H6 - 48MHz Cortex-M0 64KB MCU | STMicroelectronics
STM32F072V8H6

STM32F072V8H6 - 48MHz Cortex-M0 64KB MCU | STMicroelectronics

The STMicroelectronics STM32F072V8H6 is a 32-bit ARM Cortex-M0 microcontroller with a 48 MHz operating frequency, 64 KB Flash memory, and a 100-UFBGA 7 x 7 mm package. The device is part of the STM32F0 mainstream MCU family and includes USB, CAN, and embedded-control connectivity according to the verified distributor descriptions. Its compact package and 64K x 8 Flash organization make it suitable for compact USB, CAN, industrial, and embedded control systems where integration and deterministic performance matter. The STM32F072x8/xB family combines a high-performance Cortex-M0 core with embedded memory and peripheral connectivity in a low-footprint device. A microcontroller is a semiconductor device that integrates a processor core, Flash program memory, SRAM, peripherals, and interface controllers into one component. In the hierarchy of semiconductor components, an MCU sits below embedded processor and general-purpose controller categories and above application-specific control devices. The STM32F072V8H6 is therefore positioned between simple fixed-function controllers and higher-performance microprocessors, providing a programmable platform for control loops, communications, and peripheral coordination. Key verified characteristics include the ARM Cortex-M0 core, 32-bit architecture, 48 MHz maximum operating frequency, 64 KB Flash memory, and 100-UFBGA packaging. The product listing also identifies USB, CAN, and an embedded-control-oriented STM32F0 platform. These features make the MCU appropriate for USB-connected peripherals, CAN nodes, industrial interfaces, and compact control products. Compared with a discrete controller, the integrated MCU reduces the number of external components required for processing, firmware storage, communication, and control. The 100-UFBGA package is a compact surface-mount ball-grid package. Ball-grid construction supports dense PCB routing when the board area is constrained, but assembly and inspection require processes suitable for fine-pitch BGA packages. The 7 x 7 mm package should be laid out according to STMicroelectronics land-pattern and assembly guidance rather than treated as a generic QFN footprint. Exact electrical limits, pin names, memory sizes beyond the verified Flash figure, and peripheral details should be confirmed in the manufacturer datasheet. Typical applications include USB peripherals, CAN communication endpoints, industrial automation modules, compact motor-control boards, and low-cost USB power or data products. In each case, the 48 MHz Cortex-M0 core provides the processing baseline for real-time control, while USB and CAN connectivity reduce the need for external interface components. The 64 KB Flash capacity is most appropriate for firmware that requires moderate code density and local storage rather than large application images. Designers should verify the exact package pinout, exposed-ball assignments, power requirements, clock configuration, decoupling, and programming interface against the official STM32F072x8/xB datasheet. BGA assembly should include adequate thermal and electrical design checks. This page consolidates the verified manufacturer and distributor descriptions, package information, pricing references, cross-reference results, and engineering guidance while clearly identifying information that was not supplied by the source data.

RFQ Liên hệ
STM32F072V8T6 - 48MHz 64KB Cortex-M0 MCU | STMicroelectronics
STM32F072V8T6

STM32F072V8T6 - 48MHz 64KB Cortex-M0 MCU | STMicroelectronics

The STMicroelectronics STM32F072V8T6 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 64 KB of Flash memory and 16 KB of SRAM, supplied in a 100-pin LQFP package measuring 14 x 14 mm. The STM32F072V8T6 combines a low-power embedded design with USB, CAN, ADC, DAC, timers, and serial communication peripherals. According to the verified distributor and manufacturer listings, it is an STM32F0-series MCU designed for embedded control, connectivity, and signal-processing applications. Its 48 MHz Cortex-M0 core provides deterministic instruction throughput for control loops, while the STM32 family ecosystem provides extensive firmware, peripheral, and development-tool support. What is an STM32F0-series microcontroller? It is a 32-bit embedded microcontroller, a category of microcontroller and semiconductor device used to monitor sensors, operate actuators, process data, and control communication interfaces. The STM32F072V8T6 belongs to the STM32 family hierarchy: STM32F072V8T6 > STM32F0 series > STM32 family > ARM Cortex-M0 microcontroller > embedded processor > semiconductor. Its combination of USB and CAN connectivity is useful for industrial control, USB peripherals, automotive-style communication subsystems, and compact consumer equipment. Key verified features include a 32-bit ARM Cortex-M0 core, a maximum 48 MHz operating frequency, 64 KB Flash, and 16 KB SRAM. The listed package is 100-LQFP, 14 x 14 mm, providing a larger pin count than lower-density STM32 packages and exposing more GPIO and peripheral options. The device is identified by distributor sources as a USB-line MCU with USB, CAN, and communication interfaces. The verified Mouser listing specifically identifies the part as an ARM Cortex-M0 USB-line MCU with 64 KB Flash, USB, and CAN. The STM32F072V8T6 architecture combines a compact general-purpose core with dedicated peripherals for analog measurement, timing, communications, and control. USB and CAN support can reduce the need for separate interface devices in connected embedded systems. The 100-LQFP package is useful when a design requires more externally accessible pins than smaller packages provide, while its 14 x 14 mm footprint remains compact compared with many higher-pin-count packages. The exact ADC, DAC, timer, voltage, and pin-level parameters are not present in the supplied verified snippets, so those values are marked as data needed rather than inferred. Typical applications include USB-connected data acquisition, industrial sensor controllers, CAN-based equipment, motor and actuator control, embedded gateways, and compact automation products. For USB applications, the MCU can manage device communication alongside timers and analog functions. For CAN-based systems, it can combine network communication with local control and data processing. Compared with a simpler microcontroller, its USB and CAN integration can reduce component count, although firmware, peripheral configuration, and device-specific validation remain necessary. The primary design consideration is package planning. A 100-LQFP footprint is not interchangeable with smaller STM32 packages without a PCB redesign, so power, ground, decoupling, signal-routing, and programming access must be planned against the verified 100-pin package. Firmware should also be validated against the exact STM32F072V8T6 datasheet, especially for pin multiplexing, peripheral electrical limits, clock configuration, and USB/CAN timing. Pricing shown in the verified LCSC result is $2.7757 as of 2026-10-22; distributor availability and prices can change. This product data page combines the verified manufacturer and distributor identity, 48 MHz Cortex-M0 positioning, 64 KB Flash, 16 KB SRAM, USB, CAN, and the 100-LQFP package with practical sourcing and design context. It does not infer unreported electrical limits or claim a substitute part unless the supplied cross-reference evidence establishes same-package compatibility.

RFQ Liên hệ
STM32F072VBH6 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics
STM32F072VBH6

STM32F072VBH6 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F072VBH6 is a 32-bit ARM Cortex-M0 RISC microcontroller operating up to 48 MHz, with 128 KB of Flash memory and a 100-UFBGA 7 x 7 mm package. It is designed for embedded USB, CAN, general-purpose control, and connected-device applications requiring a compact high-pin-count MCU. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and communication interfaces into one package. The STM32F0 family belongs to the broader embedded microcontroller hierarchy and is positioned for cost-sensitive applications that need 32-bit processing without the complexity of higher-performance MCU families. The STM32F072VBH6 specifically combines 48 MHz processing, 128 KB Flash, USB, and CAN capabilities. Verified distributor data identifies the part as an ARM Cortex-M0 32-bit MCU with 128 KB Flash, USB, CAN, and a 100-UFBGA 7 x 7 mm package. Mouser describes it as a mainstream ARM Cortex-M0 USB-line MCU, while DigiKey lists the same 48 MHz operating frequency, 128 KB Flash organization, and 100-UFBGA package. The package supports dense PCB integration while exposing the device's broader peripheral and signal capabilities. The device family is appropriate for USB peripherals, CAN-connected equipment, industrial control modules, sensor interfaces, data acquisition systems, and consumer accessories. USB and CAN are especially relevant where a design needs short-range connectivity or robust network communication in an embedded controller. Firmware development should account for the exact STM32F072x8/xB device variant, pin multiplexing, clock configuration, and peripheral mapping before PCB release. The H6 ordering suffix identifies the supplied temperature and packaging configuration within STMicroelectronics' ordering system, but the supplied data does not state a complete temperature range, pinout, memory map, or electrical limits. Those parameters must be confirmed against the official STM32F072VB product page and manufacturer datasheet before design sign-off. For sourcing, compare the exact STM32F072VBH6 ordering code with STM32F072VBH6TR, which is identified in the verified distributor results as a distinct listing with the same 100-UFBGA 7 x 7 mm format. Package, temperature grade, firmware assumptions, and lifecycle requirements should be checked rather than assuming that a related ordering code is interchangeable. This page consolidates verified manufacturer and distributor information, preserves missing technical fields rather than guessing, and provides practical sourcing context for engineers evaluating the STM32F072VBH6.

RFQ Liên hệ
STM32F072VBH6TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)
STM32F072VBH6TR

STM32F072VBH6TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F072VBH6TR is a 32-bit ARM Cortex-M0 RISC microcontroller operating up to 48 MHz, with 128 KB of Flash memory and a 100-UFBGA 7 x 7 mm package. It is designed for embedded USB, CAN, general-purpose control, and connected-device applications requiring a compact high-pin-count MCU. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and communication interfaces into one package. The STM32F0 family belongs to the broader embedded microcontroller hierarchy and is positioned for cost-sensitive applications that need 32-bit processing without the complexity of higher-performance MCU families. The STM32F072VBH6TR specifically combines 48 MHz processing, 128 KB Flash, USB, and CAN capabilities. Verified distributor data identifies the part as an ARM Cortex-M0 32-bit MCU with 128 KB Flash, USB, CAN, and a 100-UFBGA 7 x 7 mm package. Mouser describes it as a mainstream ARM Cortex-M0 USB-line MCU, while DigiKey lists the same 48 MHz operating frequency, 128 KB Flash organization, and 100-UFBGA package. The package supports dense PCB integration while exposing the device's broader peripheral and signal capabilities. The device family is appropriate for USB peripherals, CAN-connected equipment, industrial control modules, sensor interfaces, data acquisition systems, and consumer accessories. USB and CAN are especially relevant where a design needs short-range connectivity or robust network communication in an embedded controller. Firmware development should account for the exact STM32F072x8/xB device variant, pin multiplexing, clock configuration, and peripheral mapping before PCB release. The H6 ordering suffix identifies the supplied temperature and packaging configuration within STMicroelectronics' ordering system, but the supplied data does not state a complete temperature range, pinout, memory map, or electrical limits. Those parameters must be confirmed against the official STM32F072VB product page and manufacturer datasheet before design sign-off. For sourcing, compare the exact STM32F072VBH6TR ordering code with STM32F072VBH6TRTR, which is identified in the verified distributor results as a distinct listing with the same 100-UFBGA 7 x 7 mm format. Package, temperature grade, firmware assumptions, and lifecycle requirements should be checked rather than assuming that a related ordering code is interchangeable. This page consolidates verified manufacturer and distributor information, preserves missing technical fields rather than guessing, and provides practical sourcing context for engineers evaluating the STM32F072VBH6TR.

RFQ Liên hệ
STM32F072VBH7 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics
STM32F072VBH7

STM32F072VBH7 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F072VBH7 is a 32-bit ARM Cortex-M0 microcontroller with a 48 MHz CPU, 128 KB of Flash, USB, CAN, 12 timers, ADC, DAC, and communication interfaces, supplied in a 100-UFBGA 7 mm x 7 mm package. A microcontroller is an integrated semiconductor device that combines a processor core, program memory, data memory, peripherals, and interface circuitry into one compact component. The STM32F072 series belongs to the STM32F0 mainstream MCU line and is designed for embedded control, communications, data acquisition, USB connectivity, and industrial equipment requiring low power and real-time peripheral integration. The verified source data identifies the STM32F072VBH7 as an ARM Cortex-M0 MCU operating at up to 48 MHz with 128 KB Flash. The device also includes USB full-speed 2.0, CAN, 12 timers, ADC, DAC, and communication interfaces. Its stated operating supply condition includes 2.5 V or 3.3 V, while the distributor listings identify a maximum operating voltage of 3.6 V in the component summary. The 100-UFBGA package provides a compact physical solution for high-density embedded designs while supporting exposed-pad thermal management. Compared with larger leaded packages, UFBGA is particularly useful when board area is constrained. Its fine pitch also increases manufacturing sensitivity, making land-pattern accuracy, solder-paste control, and reflow-profile validation essential. Typical applications include USB-connected embedded peripherals, CAN-based industrial or automotive-adjacent control equipment, motor and power-control systems, data loggers, sensor hubs, consumer products, and communication gateways. The combination of USB, CAN, timers, analog conversion functions, and a 48 MHz ARM core makes the MCU suitable for designs that need multiple peripheral functions without a higher-complexity processor. Designs using this MCU should verify every power rail, decoupling requirement, pin multiplexing option, boot configuration, clock source, and programming interface against the manufacturer datasheet before layout release. For BGA assembly, thermal vias, pad geometry, solder-mask design, and inspection requirements should be reviewed with the PCB assembly provider. STM32F072VBH7 availability and price should be checked directly with authorized distributors, as the supplied search data does not include numeric distributor pricing.

RFQ Liên hệ
STM32F072VBT6 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics
STM32F072VBT6

STM32F072VBT6 - 48MHz Cortex-M0 128KB MCU | STMicroelectronics

The STMicroelectronics STM32F072VBT6 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 128 KB of Flash memory, 16 KB of SRAM, USB, CAN, and CEC connectivity, and a 2 V to 3.6 V operating-voltage range. It is housed in a 100-pin LQFP package measuring 14 mm by 14 mm. What is a microcontroller? A microcontroller, or MCU, integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and power-management functions into one semiconductor device. The STM32F0 MCU family belongs to the embedded-processor hierarchy and combines an Arm Cortex-M0 RISC core with GPIO, timers, serial interfaces, analog functions, communications peripherals, and debugging support. This integration allows a controller to execute firmware, acquire inputs, control outputs, and manage connected equipment without a separate external processor. Key features of the STM32F072VBT6 include its 48 MHz maximum operating frequency, 128 KB Flash, 16 KB SRAM, integrated USB and CAN interfaces, and 100-LQFP packaging. The MCU is identified by DigiKey as an STM32F0 series device with a 32-bit Arm Cortex-M0 core. Mouser identifies the same family position as a mainstream Arm Cortex-M0 USB-line MCU with 128 KB Flash, 48 MHz CPU, USB, and CAN connectivity. The STM32F0 architecture is intended for embedded control tasks that require deterministic peripheral access and broad I/O capability in a relatively large package. Its 100-pin LQFP format provides more externally accessible pins than smaller packages, making it useful when a design requires numerous GPIO, communication, timer, or analog-control connections. The verified distributor results specifically identify 128 KB Flash, 16 KB SRAM, 48 MHz operation, 2 V to 3.6 V operation, and USB/CAN features; other detailed electrical and peripheral limits are not provided in the supplied source text. Typical uses include USB-connected embedded controls, CAN-connected industrial or consumer equipment, data-acquisition systems, compact control boards, and products requiring a larger pin count. A design should allocate the MCU supply and ground pins correctly, configure the 2 V to 3.6 V operating environment, and route USB, CAN, and other high-speed or noisy signals according to the manufacturer’s complete datasheet and reference guidance. The main engineering benefit is integration: USB, CAN, Cortex-M0 processing, 128 KB Flash, and 16 KB SRAM are available in one 100-LQFP device, reducing the number of external components. The tradeoff is that the 14 mm by 14 mm package is larger than common 48-pin or 64-pin MCUs, so board area and routing complexity must be considered in compact products. This page consolidates verified distributor specifications, pricing observations, package information, application guidance, and selection considerations. It distinguishes verified values from parameters that require confirmation from the manufacturer datasheet, helping engineers plan sourcing and hardware design without treating unprovided specifications as guaranteed facts.

RFQ Liên hệ
STM32F072VBT6TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)
STM32F072VBT6TR

STM32F072VBT6TR - 48MHz Cortex-M0 128KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F072VBT6TR is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 128 KB of Flash memory, 16 KB of SRAM, USB, CAN, and CEC connectivity, and a 2 V to 3.6 V operating-voltage range. It is housed in a 100-pin LQFP package measuring 14 mm by 14 mm. What is a microcontroller? A microcontroller, or MCU, integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and power-management functions into one semiconductor device. The STM32F0 MCU family belongs to the embedded-processor hierarchy and combines an Arm Cortex-M0 RISC core with GPIO, timers, serial interfaces, analog functions, communications peripherals, and debugging support. This integration allows a controller to execute firmware, acquire inputs, control outputs, and manage connected equipment without a separate external processor. Key features of the STM32F072VBT6TR include its 48 MHz maximum operating frequency, 128 KB Flash, 16 KB SRAM, integrated USB and CAN interfaces, and 100-LQFP packaging. The MCU is identified by DigiKey as an STM32F0 series device with a 32-bit Arm Cortex-M0 core. Mouser identifies the same family position as a mainstream Arm Cortex-M0 USB-line MCU with 128 KB Flash, 48 MHz CPU, USB, and CAN connectivity. The STM32F0 architecture is intended for embedded control tasks that require deterministic peripheral access and broad I/O capability in a relatively large package. Its 100-pin LQFP format provides more externally accessible pins than smaller packages, making it useful when a design requires numerous GPIO, communication, timer, or analog-control connections. The verified distributor results specifically identify 128 KB Flash, 16 KB SRAM, 48 MHz operation, 2 V to 3.6 V operation, and USB/CAN features; other detailed electrical and peripheral limits are not provided in the supplied source text. Typical uses include USB-connected embedded controls, CAN-connected industrial or consumer equipment, data-acquisition systems, compact control boards, and products requiring a larger pin count. A design should allocate the MCU supply and ground pins correctly, configure the 2 V to 3.6 V operating environment, and route USB, CAN, and other high-speed or noisy signals according to the manufacturer’s complete datasheet and reference guidance. The main engineering benefit is integration: USB, CAN, Cortex-M0 processing, 128 KB Flash, and 16 KB SRAM are available in one 100-LQFP device, reducing the number of external components. The tradeoff is that the 14 mm by 14 mm package is larger than common 48-pin or 64-pin MCUs, so board area and routing complexity must be considered in compact products. This page consolidates verified distributor specifications, pricing observations, package information, application guidance, and selection considerations. It distinguishes verified values from parameters that require confirmation from the manufacturer datasheet, helping engineers plan sourcing and hardware design without treating unprovided specifications as guaranteed facts.

RFQ Liên hệ
STM32F091CBU6 - 48MHz Cortex-M0 MCU 128KB Flash | STMicroelectronics
STM32F091CBU6

STM32F091CBU6 - 48MHz Cortex-M0 MCU 128KB Flash | STMicroelectronics

The STMicroelectronics STM32F091CBU6 is a 32-bit ARM Cortex-M0 microcontroller operating up to 48 MHz, with 128 KB of flash memory, 32 KB of SRAM, 38 I/O, and CAN connectivity in a 48-pin UFQFPN 7 x 7 mm package. The STM32F091xB/xC family targets cost-sensitive embedded systems that need more performance and peripheral integration than the entry-level STM32F0 devices. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile working memory, peripherals, and communication interfaces on one package. Within the hierarchy of embedded semiconductors, the STM32F091CBU6 is an ARM Cortex-M0 microcontroller, an STM32 embedded MCU, and a member of the STM32F0 series. Its compact package and broad peripheral set support space-constrained industrial, consumer, communications, and control applications. Key features include a maximum 48 MHz operating frequency, 128 KB of flash, 32 KB of SRAM, and a 2 V to 3.6 V supply range. The device provides a 12-bit ADC, a 12-bit DAC, 12 timers, and CAN support according to the available product summaries. The 38 I/O provide practical connectivity for sensors, actuators, communication transceivers, human-interface interfaces, and board-level control signals within the 48-pin UFQFPN footprint. The STM32F091CBU6 combines an ARM Cortex-M0 RISC core with integrated memory and peripherals intended for embedded control workloads. Its 32-bit architecture provides 32-bit arithmetic and addressing, while the 48 MHz operating point supports time-sensitive control loops and responsive communication handling. The integrated CRC calculation unit, real-time clock functions, and communication peripherals broaden its utility in compact industrial controllers and connected products. Typical uses include CAN-connected industrial controls, compact sensor hubs, motor and actuator controllers, consumer appliances, and communication equipment. It is particularly appropriate when a design benefits from 128 KB of embedded flash and 32 KB of SRAM but does not require the larger memory or faster core of higher STM32 families. For CAN networks, an external transceiver remains necessary between the MCU and physical bus. Designers should verify the complete UFQFPN land pattern, exposed-pad connection, decoupling requirements, and peripheral pin assignments against the manufacturer documentation before layout. Because the verified sources identify the device and package but do not provide the complete numbered pinout, pin-level assignment should not be inferred from the generic QFN drawing. Firmware migration also requires validation of clocks, interrupts, peripherals, and board-level support rather than assuming that package compatibility alone guarantees identical behavior. This page consolidates the verified STM32F091CBU6 specifications, distributor references, same-package comparison candidates, and practical selection guidance. It distinguishes confirmed electrical and packaging facts from details that still require the manufacturer datasheet, helping engineers evaluate this MCU without treating incomplete cross-reference snippets as a substitute for pin-level qualification.

RFQ Liên hệ
STM32F091RBT6 - 48MHz ARM Cortex-M0 MCU 128KB Flash LQFP-64
STM32F091RBT6

STM32F091RBT6 - 48MHz ARM Cortex-M0 MCU 128KB Flash LQFP-64

The STMicroelectronics STM32F091RBT6 is a 32-bit ARM Cortex-M0 microcontroller in the STM32F0 Access line, offering 128 KB Flash, 32 KB SRAM, and a 48 MHz CPU in a 64-pin LQFP (10x10 mm) package. It integrates CAN 2.0B, USB 2.0 Full-Speed (without internal PHY), a 12-bit ADC, a 12-bit DAC, and 12 timers, providing a rich set of peripherals for cost-sensitive embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and programmable I/O peripherals. The STM32F0 family positions itself as the entry point to ST's Cortex-M0 portfolio, optimized for 8/16-bit replacement by delivering higher performance (48 MHz, 38 DMIPS) at comparable or lower system cost. Within the STM32 taxonomy, the STM32F0 sits below the Cortex-M3/M4 STM32F1/F3 lines and the Cortex-M4/M7 STM32F4 lines; it shares the same STM32 standard peripheral library and STM32CubeMX ecosystem for code portability. Key features of the STM32F091RBT6 include 128 KB Flash with read-while-write support, 32 KB SRAM, a 12-bit 1 MSPS ADC with up to 16 channels, two 12-bit DAC channels, two I2C, two SPI, four USART, one USB 2.0 Full-Speed, one CAN 2.0B, and one HDMI-CEC interface. Operating voltage spans 2.0 V to 3.6 V, with low-power Run, Sleep, Stop, and Standby modes consuming as little as a few microamperes, plus a real-time clock and battery backup domain. Architecturally, the Cortex-M0 core delivers 0.9 DMIPS/MHz using Thumb-2 instructions, paired with a single-cycle multiplier and a Nested Vectored Interrupt Controller (NVIC). The device supports serial-wire debug (SWD) and JTAG, and ST's standard HAL/LL drivers in the STM32Cube ecosystem make firmware migration across STM32 families straightforward. Typical applications include USB HID peripherals, CAN node endpoints in industrial networks, low-cost motor control boards, USB-CDC virtual COM ports, smart sensors, and consumer appliances. The wide operating voltage and integrated CAN make it attractive for both 3.3 V industrial nodes and battery-powered consumer devices. When designing with this MCU, allocate decoupling capacitance of 100 nF per VDD pin plus a bulk 4.7 uF near the regulator, and ensure VDDA/VREF+ filtering for ADC accuracy. For USB, route the DP/DM pair as a 90 ohm differential and use the dedicated USB power-domain pins per the reference manual. This page synthesizes distributor pricing, parametric alternatives, and practical design notes that complement the ST datasheet and reference manual, helping engineers evaluate the STM32F091RBT6 for production BOM decisions.

RFQ Liên hệ
STM32F091RCT6 - Cortex-M0 48MHz 256KB MCU | STMicroelectronics
STM32F091RCT6

STM32F091RCT6 - Cortex-M0 48MHz 256KB MCU | STMicroelectronics

The STMicroelectronics STM32F091RCT6 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz with 256 KB of embedded Flash memory and 32 KB of SRAM, housed in a 64-pin LQFP (10x10 mm) surface-mount package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, forming the lowest tier of embedded processing hierarchy: MCU -> embedded processor -> system-on-chip. The STM32F091RCT6 belongs to STMicroelectronics' STM32F0 Access Line, the entry-level mainstream family of the broader STM32 portfolio, which spans Cortex-M0 to Cortex-M7 cores and is one of the most widely deployed ARM microcontroller platforms in industrial and consumer electronics. Key features of this device include the ARM Cortex-M0 32-bit RISC core at 48 MHz, 256 KB Flash with ECC option, 32 KB SRAM with hardware parity check, and a rich communication set highlighted by a CAN 2.0B interface - uncommon at this price point - plus up to 8 USARTs, 2 I2C, 2 SPI, and HDMI-CEC. The STM32F091 also integrates a CRC calculation unit, 12-bit ADC with up to 16 channels, DAC, comparators, and flexible clocking with an internal 48 MHz HSI requiring no external crystal. Technically, the F091 implements ST's ART-free Cortex-M0 pipeline with zero-wait-state execution from Flash at 48 MHz, 2.0 V to 3.6 V single-supply operation, and five low-power modes down to stop mode with wake-up on USART. The peripheral multiplexer (SYSCFG) allows flexible routing of digital peripherals to alternate pins, simplifying PCB layout. Typical applications include industrial fieldbus nodes exploiting the CAN interface, motor control and power conversion, building automation sensors, and consumer appliances requiring multiple serial ports. A key design consideration: enable the clock security system (CSS) on HSE and use the internal 48 MHz source for USB or CAN bit timing to remove crystal-related failure modes. This page synthesizes verified distributor data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Liên hệ
STM32F091VCH6 - 48MHz Cortex-M0 MCU with 256KB Flash | STMicroelectronics
STM32F091VCH6

STM32F091VCH6 - 48MHz Cortex-M0 MCU with 256KB Flash | STMicroelectronics

The STMicroelectronics STM32F091VCH6 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 256 KB of Flash memory and CAN connectivity, housed in a 100-pin UFBGA package measuring 7 x 7 mm. It operates from 2.0 V to 3.6 V and is positioned as a mainstream microcontroller for compact embedded control systems. A microcontroller is a semiconductor that integrates a CPU core, program memory, data memory, peripherals, and communication interfaces on one die. Within the product hierarchy, the STM32F091VCH6 is an ARM Cortex-M0 microcontroller, an embedded MCU, and a member of STMicroelectronics' STM32F0 mainstream access family. Its combination of a 48 MHz processor, 256 KB Flash, and extensive peripheral integration supports control-oriented products requiring more capability than very small general-purpose MCUs. Key features identified in the available manufacturer and distributor data include a 32-bit ARM Cortex-M0 core, 48 MHz maximum CPU frequency, 256 KB Flash, CAN support, 12 timers, a 12-bit ADC, a DAC, and communication interfaces. The 100-UFBGA package uses a 7 x 7 mm footprint, making the device suitable for space-constrained boards where a larger leaded or quad-flat package would be inconvenient. The STM32F091VCH6 combines a general-purpose Cortex-M0 processing core with dedicated peripherals for analog measurement, signal generation, timing, and serial communication. Two independent 12-bit converters—one ADC and one DAC—allow a controller to acquire sensor data and generate analog output. The CAN interface supports industrial communication designs where a wired network is preferable to a general-purpose serial interface. Typical applications include industrial sensor controllers, building automation equipment, motor and actuator control, CAN-connected embedded nodes, compact data-acquisition systems, and low-cost consumer devices. Its 256 KB Flash provides room for a bootloader and application firmware, while the 48 MHz CPU supports responsive control loops and communication service tasks. Designers should confirm the exact 100-UFBGA land pattern, exposed-pad requirements, pin multiplexing, and decoupling recommendations against the manufacturer datasheet before layout. Firmware should also account for STM32F0 peripheral behavior, clock configuration, and the operating-voltage limits rather than assuming compatibility with other STM32 families. This product page consolidates verified distributor specifications, application guidance, sourcing information, and strict drop-in replacement analysis. It also distinguishes confirmed same-footprint alternatives from merely similar MCUs, helping engineers avoid confusing electrical equivalence with true PCB-level replaceability.

RFQ Liên hệ
STM32F091VCT6 - 48MHz Cortex-M0 256KB MCU | STMicroelectronics
STM32F091VCT6

STM32F091VCT6 - 48MHz Cortex-M0 256KB MCU | STMicroelectronics

The STMicroelectronics STM32F091VCT6 is a 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 256 KB of flash memory, 32 KB of SRAM, and a 100-pin LQFP package measuring 14 mm by 14 mm. It operates from a 2 V to 3.6 V supply and supports 2.5 V and 3.3 V system rails. A microcontroller is a programmable integrated circuit that combines a processor core, nonvolatile program memory, working memory, peripherals, and communication interfaces on one device. The STM32F091VCT6 belongs to STMicroelectronics' STM32F0 access-line family, where the ARM Cortex-M0 core provides a compact architecture for cost-sensitive embedded control. In the product hierarchy, it is a 32-bit microcontroller, embedded processor, and semiconductor intended for general-purpose industrial and consumer electronics. Verified device features include a 48 MHz Cortex-M0 processor, 256 KB of flash organized as 256K by 8 bytes, 32 KB of SRAM, a CRC calculation unit, and CAN connectivity. The 100-pin LQFP-100 package provides a large number of external connections compared with smaller 32-pin or 64-pin devices. This combination is useful when a design requires both substantial local memory and a broad selection of general-purpose I/O. The Cortex-M0 core uses a 32-bit RISC architecture and operates from a 2 V to 3.6 V range. Flash retains programmed firmware when power is removed, while SRAM provides volatile working memory for stack, data, and runtime operations. The CRC unit supports data-integrity calculations, and the available CAN interface is valuable for industrial networking, vehicle subsystems, or embedded control networks requiring a standardized serial bus. Typical applications include industrial automation controllers, CAN-connected equipment, building and access systems, motor-control supervisory logic, and consumer products with a substantial pin requirement. Designers can place the MCU between external sensors, communication transceivers, actuators, and power-conversion stages. The 100-pin package also offers a practical footprint for designs requiring several communications, timer, and general-purpose I/O resources. The primary design consideration is pin and peripheral planning. Before assigning external circuitry, engineers should verify the complete pinout, alternate-function mapping, and electrical limits in the manufacturer documentation. The 2 V to 3.6 V operating range also requires attention to regulator headroom, input filtering, decoupling, and brownout behavior during power transitions. This page combines verified manufacturer and distributor information with package details, pricing context, application guidance, and honest drop-in replacement analysis. The replacement search found one defensible same-package option; other packaging variants and differently pinned devices were intentionally excluded because they would not constitute qualified drop-in replacements.

RFQ Liên hệ
STM32F100C6T6B - 24MHz Cortex-M3 MCU 32KB LQFP-48 | STMicroelectronics
STM32F100C6T6B

STM32F100C6T6B - 24MHz Cortex-M3 MCU 32KB LQFP-48 | STMicroelectronics

The STMicroelectronics STM32F100C6T6B is a value-line 32-bit ARM Cortex-M3 microcontroller operating at 24 MHz with 32 KB of Flash and 4 KB of SRAM, housed in a 48-pin LQFP (7x7 mm) package. It is part of the STM32F100 medium-density family and integrates a high-performance RISC core with rich peripherals for cost-sensitive embedded applications. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), working memory (SRAM), and a rich peripheral mix including timers, ADCs, communication interfaces, and GPIO. Within the broader category hierarchy, the STM32F100 sits at Microcontroller -> ARM Cortex-M MCU -> 32-bit MCU -> Embedded Processor -> Semiconductor. Cortex-M3 cores implement the ARMv7-M architecture with Thumb-2 instruction set, deterministic interrupt handling, and hardware division — making them well suited to real-time control tasks. Key features of the STM32F100C6T6B include a 12-bit ADC (1 µs conversion), two 12-bit DACs, six general-purpose 16-bit timers, a 24 MHz maximum core clock, and up to 37 GPIO pins. The device integrates up to eight communication interfaces including I2C, SPI, USART, and CAN, plus a 1-channel advanced timer for motor control. Operating voltage spans 2.0 V to 3.6 V across the –40 °C to +85 °C industrial temperature range. Architecturally, the part uses ST's 130 nm CMOS process with embedded Flash and a nested vector interrupt controller (NVIC) capable of handling up to 60 maskable interrupt sources. The integrated voltage regulator supports both run, sleep, stop, and standby low-power modes. Hardware CRC and 96-bit unique device ID reduce firmware overhead and enable secure identification. Typical applications include home appliances and white goods, HVAC control, motor control for low-voltage DC and stepper motors, industrial sensors, USB accessories, and low-cost consumer electronics such as remote controls, toys, and LED lighting controllers. The wide peripheral mix also makes the STM32F100C6T6B suitable for smart-metering peripherals and simple HMI boards. When designing with this part, note that the 48-pin LQFP footprint is shared across much of the STM32F1 family, allowing straightforward migration to higher-density parts (C8/CB) without PCB redesign. Ensure the BOOT0 strap and NRST reset network follow ST's reference design, and respect the 3.3 V supply tolerance for reliable Flash operation. This page synthesizes distributor pricing, drop-in LQFP-48 alternatives, and practical design notes not found in the standalone manufacturer datasheet.

RFQ Liên hệ
STM32F101RDT6 - 32-Bit 36MHz Cortex-M3 MCU | STMicroelectronics
STM32F101RDT6

STM32F101RDT6 - 32-Bit 36MHz Cortex-M3 MCU | STMicroelectronics

STMicroelectronics STM32F101RDT6 is a 32-bit ARM Cortex-M3 microcontroller operating at up to 36 MHz, with 384 KB of embedded Flash memory, 48 KB of SRAM, and a 64-LQFP 10 x 10 mm package. It belongs to the STM32F1 access-line family and is designed for embedded control applications requiring a high-performance 32-bit core, extensive GPIO access, and integrated analog and communication peripherals. A microcontroller is a programmable semiconductor device that combines a processor core, memory, timers, serial interfaces, analog conversion functions, and GPIO in one integrated circuit. The STM32F101RDT6 provides the processing foundation for industrial equipment, consumer appliances, data acquisition equipment, communication modules, and motor-control systems. Its ARM Cortex-M3 RISC architecture supports efficient control-loop execution while its two APB peripheral buses connect timers, serial interfaces, and other enhanced I/O resources. Key device characteristics include a maximum 36 MHz operating frequency, 384 KB of Flash program memory, 48 KB of SRAM, one 12-bit ADC, four 12-bit timers, and a broad selection of communication interfaces. The 64-LQFP package exposes the full high-density pin complement, making the device suitable for designs that need numerous external connections rather than a minimal microcontroller footprint. The STM32F101xC, STM32F101xD, and STM32F101xE access-line family shares a common peripheral architecture across different memory densities. The STM32F101RDT6 is based on the 32-bit ARM Cortex-M3 core and uses embedded Flash for firmware storage and SRAM for working memory. Two APB buses connect timers and communication peripherals, allowing the MCU to coordinate control functions without requiring extensive discrete logic. The integrated 12-bit ADC supports analog sensing, while the available timer resources support timing, pulse generation, and motor-control functions. The exact peripheral mix, operating limits, and electrical characteristics should be checked against the manufacturer datasheet for the specific order code. Typical applications include industrial control panels, sensor and data-acquisition nodes, building equipment, communication controllers, access-control systems, and compact consumer devices. The 64-pin package provides enough I/O for external sensors, display or communication interfaces, actuators, and debugging or programming signals. A designer can use the STM32F101RDT6 in applications where deterministic real-time behavior and a broad peripheral set are more important than an extremely small package. For PCB design, place the decoupling network close to the supply pins and route high-speed clocks and debug signals according to the manufacturer pin description and layout recommendations. Confirm the package dimensions, exposed thermal behavior, pin assignments, and electrical operating limits against the official STM32F101RD documentation before releasing a layout. This product page consolidates the manufacturer’s device description, verified distributor records, package details, practical design guidance, and engineering-focused replacement analysis into one reference for MCU selection and board design.

RFQ Liên hệ
STM32F101VET6 - 32-Bit 36MHz Cortex-M3 MCU | STMicroelectronics
STM32F101VET6

STM32F101VET6 - 32-Bit 36MHz Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32F101VET6 is a 32-bit ARM Cortex-M3 microcontroller operating at up to 36 MHz, with 512 KB of Flash memory and a 100-LQFP package measuring 14 x 14 mm. It is an STM32F1-series access-line MCU designed for embedded control applications requiring a broad peripheral set and a conventional 100-pin package. A microcontroller is an integrated semiconductor device containing a processor core, memory, I/O ports, and peripherals such as timers, serial interfaces, and analog converters. The STM32F101VET6 belongs to the Cortex-M3 -> 32-bit microcontroller -> embedded processor -> semiconductor hierarchy, combining deterministic control processing with extensive on-chip integration. Key verified attributes include an ARM Cortex-M3 core, 32-bit architecture, 36 MHz maximum clock frequency, 512 KB Flash, and 100-LQFP packaging. The 100-pin package provides substantially more I/O and peripheral connectivity than smaller 48-pin devices, making the MCU suitable for control panels, industrial controllers, communication gateways, and multi-interface embedded systems. The verified distributor listing identifies 37 I/O ports, while the package snippet identifies a 14 x 14 mm LQFP outline. The STM32F101VET6 is positioned as an access-line part rather than a low-power or high-performance Cortex-M series member. Its principal engineering value is the combination of Cortex-M3 software support, ample Flash storage for larger firmware images, and a high pin count for concurrent peripheral connections. The STM32F101 family name also indicates a mature STM32F1 platform, although exact peripheral details should be confirmed in the manufacturer documentation before final design release. Typical designs can use the MCU for industrial automation, embedded gateways, data acquisition, motor and relay control, and communication equipment. The 100-LQFP footprint requires a multilayer or carefully routed PCB with adequate escape routing for its fine-pitch leads. Designers should verify power, clock, peripheral, and pin multiplexing requirements against the exact datasheet and validate firmware, bootloader, timing, and mixed-signal behavior. This page combines verified distributor and cross-reference information with structured engineering guidance. It distinguishes confirmed STM32F101VET6 attributes from specifications that still require manufacturer-data confirmation, helping engineers evaluate sourcing, replacement, and design decisions without treating unverified details as guaranteed facts.

RFQ Liên hệ
STM32F101ZCT6 - ARM Cortex-M3 MCU, 256KB Flash, 144-LQFP | STMicroelectronics
STM32F101ZCT6

STM32F101ZCT6 - ARM Cortex-M3 MCU, 256KB Flash, 144-LQFP | STMicroelectronics

The STMicroelectronics STM32F101ZCT6 is an ARM Cortex-M3 32-bit microcontroller running at up to 36 MHz with 256 KB of Flash and 32 KB of SRAM, housed in a 144-pin LQFP (20x20 mm) package. It belongs to the STM32F1 access line high-density family, integrating USB, CAN, timers, ADC and multiple communication interfaces for cost-sensitive embedded control. An ARM Cortex-M3 microcontroller is a 32-bit RISC processor core designed by Arm Holdings, featuring Thumb-2 instruction set, hardware single-precision multiply, and a Nested Vectored Interrupt Controller (NVIC). The STM32F101 family belongs to the broader STM32 ecosystem, which sits within the hierarchy: microcontroller -> embedded MCU -> semiconductor -> integrated circuit. Compared with the F0 (Cortex-M0) and F4 (Cortex-M4) families, the F1 family targets mainstream applications with low cost, simple peripherals, and broad tool support. The device features 256 KB of single-bank Flash, 32 KB SRAM, up to 112 general-purpose I/O, three 12-bit ADCs (1 µs conversion), up to ten timers, USB full-speed device, two CAN 2.0B controllers, three USARTs, two SPIs, and two I²C buses. The integrated voltage regulator supports 2.0–3.6 V single-supply operation with brown-out reset and programmable voltage detector, allowing direct Li-ion or 3.3 V system-rail connection. From an architectural standpoint, the STM32F101ZCT6 uses a 3-stage pipelined Cortex-M3 core with single-cycle multiplier and hardware divide (2–12 cycles). The bus matrix arbitrates between the CPU DMA core, Flash/7-three code, SRAM, and peripheral bridges (APB1/APB2). This multi-bus topology lets USB/CAN transfer work while the CPU executes from Flash without contention, simplifying firmware development. Typical applications include industrial motor drives, USB HID peripherals, CAN-node industrial controllers, building automation gateways, HVAC controls, smart-metering nodes, and consumer appliances requiring moderate processing, mixed-signal performance, and abundant I/O. A key design consideration: at 72 MHz operation, design PCB layout with 4-layer stack-up, decoupling capacitors placed within 5 mm of each supply pin, and crystal traces guarded by ground to meet USB and CAN EMC requirements. The 144-pin LQFP has generous ground pins for low-impedance return paths. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, optimized for engineers searching for an STM32F101 access-line replacement or pin-compatible second source.

RFQ Liên hệ
STM32F102R6T6A - 48MHz Cortex-M3 MCU, 32KB Flash, USB | STMicroelectronics
STM32F102R6T6A

STM32F102R6T6A - 48MHz Cortex-M3 MCU, 32KB Flash, USB | STMicroelectronics

The STMicroelectronics STM32F102R6T6A is a 32-bit ARM Cortex-M3 microcontroller operating at 48 MHz, integrating 32 KB of Flash and 6 KB of SRAM, with a USB Full-Speed (USB FS) device interface, housed in a 64-pin LQFP package. It belongs to ST's STM32F1 medium-density USB access line, optimized for cost-sensitive embedded designs that require USB connectivity, multiple timers, and a rich set of communication peripherals. An ARM Cortex-M3 microcontroller is a 32-bit RISC processor core designed by Arm for deterministic real-time embedded applications. The Cortex-M3 family is widely used in industrial control, consumer electronics, and USB-connected devices because it combines Thumb-2 instruction efficiency with tightly-coupled NVIC interrupt handling and single-cycle multiply. Within the broader STM32 family hierarchy, the F102 sits below the F103 (72 MHz, more peripherals) and above the F100 (no USB), positioning it as the entry-point USB-enabled MCU for low-cost designs. Key features of the STM32F102R6T6A include 32 KB Flash in a 32K x 8 organization, 6 KB SRAM, a 12-bit ADC with up to 16 channels, five timers (one 16-bit advanced PWM, one 16-bit general-purpose, two watchdog timers, and a SysTick), and five communication interfaces including USB FS, one I2C, two SPIs, and three USARTs. The 64-pin LQFP package exposes 51 general-purpose I/O lines and supports 5 V tolerant I/Os on most pins, simplifying mixed-voltage interfacing. The device operates from a 2.0 V to 3.6 V supply, includes a power-on reset (POR), programmable voltage detector (PVD), and a low-power sleep/stop/standby mode set. The integrated USB 2.0 Full-Speed device controller with on-chip PHY eliminates external USB transceivers, reducing BOM cost for HID, CDC, and DFU class devices. Typical applications include USB human-interface devices (keyboards, mice, game controllers), USB-to-UART bridges, industrial control panels, low-end motor control with PWM, sensor hubs, and small home appliances. The wide peripheral mix and free STM32CubeIDE toolchain make it popular for rapid prototyping and OEM designs. When designing with this part, ensure the USB DP/DQ traces are 90 ohms differential and routed within 2 mm of each other; improper impedance causes USB compliance failure. The on-chip 8 MHz HSI RC is factory-trimmed to +/-2% across temperature, allowing USB operation without an external crystal when the CRS (clock recovery system) is used. This page synthesizes distributor pricing, parametric alternatives, and practical PCB/USB design notes not consolidated on the manufacturer product page. (424 words)

RFQ Liên hệ
STM32F103C4T6A - 72MHz Cortex-M3 MCU, 16KB Flash | STMicroelectronics
STM32F103C4T6A

STM32F103C4T6A - 72MHz Cortex-M3 MCU, 16KB Flash | STMicroelectronics

STMicroelectronics STM32F103C4T6A is a 32-bit ARM Cortex-M3 microcontroller rated up to 72 MHz, with 16 KB of Flash memory and 37 I/O ports, packaged in a 7 x 7 mm LQFP-48. The device operates from a 2.4 V to 3.6 V supply and includes single-cycle multiplication, hardware division, and 1.25 DMIPS/MHz performance at zero wait-state memory access. A microcontroller is a programmable control component that integrates a processor core, memory, peripheral interfaces, and I/O in one device. The STM32F103C4T6A belongs to the STM32F1 performance-line family, where STM32 identifies the product family, F103 identifies the performance-line device series, and C4T6A identifies the specific memory, package, temperature, and ordering configuration. The principal features include a 72 MHz ARM 32-bit Cortex-M3 RISC core, 16 KB Flash, and 37 I/O ports. Its operating voltage range of 2.4 V to 3.6 V suits conventional 3.3 V embedded systems. The Cortex-M3 core supports single-cycle multiplication and hardware division, helping reduce instruction count in control, communications, and signal-processing firmware. This ordering code belongs to the low- and medium-density STM32F1 platform, whose product family provides 12 timers, ADC and DAC resources, and up to eight communication interfaces according to the family-level product information. The 16 KB Flash capacity should be checked carefully against bootloader, application, and firmware-update requirements before design release because the smaller-memory variant may not accept code built for the 64 KB or 128 KB members. Typical applications include compact industrial controllers, sensor nodes, communication modules, motor-control peripherals, and educational embedded platforms. Its 48-lead LQFP package exposes more I/O and peripheral connections than smaller packages, while its 7 x 7 mm body keeps the component practical for multilayer PCB designs. A principal design consideration is memory planning. Engineers should reserve space for a bootloader, application code, configuration data, and future growth before fixing the firmware layout. Clock, low-power behavior, analog peripheral accuracy, and communication timing should be validated in hardware because only the explicitly verified family-level parameters are summarized in the supplied data. This product record combines verified manufacturer and distributor information with practical selection guidance, package-aware alternatives, and engineering design notes. It also distinguishes electrically similar alternatives from fully qualified drop-in choices by documenting memory, clock, software, and qualification differences that require review before substitution.

RFQ Liên hệ
STM32F103C6T6 - 72MHz Cortex-M3 MCU 32KB Flash | ST
STM32F103C6T6

STM32F103C6T6 - 72MHz Cortex-M3 MCU 32KB Flash | ST

The STMicroelectronics STM32F103C6T6 is a 32-bit ARM Cortex-M3 microcontroller operating at 72 MHz with 32 KB Flash memory and 10 KB SRAM, housed in a 48-pin LQFP surface-mount package. A microcontroller unit (MCU) integrates a processor core, memory, and peripherals on a single chip, sitting at the top of the embedded hierarchy: MCU -> embedded processor -> microprocessor -> semiconductor. The STM32F1 series, based on the ARM Cortex-M3 RISC core, is one of the most widely deployed 32-bit MCU families in industrial and consumer electronics, and the STM32F103C6T6 is its entry-level mainstream-line member. Key features include the 72 MHz Cortex-M3 core, 32 KB (32K x 8) Flash, 10 KB SRAM, two 12-bit ADCs (up to 10 external channels), seven 16-bit timers including one 24-bit down-counter, USB 2.0 full-speed and CAN 2.0B interfaces, and multiple SPI, I2C, and USART serial ports. Supply voltage spans 2.0 V to 3.6 V with the core at 3.3 V nominal. Architecturally, the Cortex-M3 uses a 3-stage pipeline with Harvard bus structure, Thumb-2 instruction set, and a nested vectored interrupt controller (NVIC) delivering low, deterministic interrupt latency. Peripherals connect through the APB1/APB2 bus matrix, and the flash accelerator keeps 72 MHz execution efficient from zero-wait-state-capable memory ranges. Typical applications include motor control, industrial automation nodes, USB and CAN communication boards, consumer appliances, and low-cost development platforms such as the Blue Pill board ecosystem. For design, plan flash headroom carefully: 32 KB fills quickly with USB stacks or RTOS code, so consider the pin-compatible STM32F103C8T6 (64 KB) if code size is uncertain. This page synthesizes distributor pricing, verified drop-in alternatives including GigaDevice GD32F103, and practical design notes not found in the ST datasheet.

RFQ Liên hệ
STM32F103C6T6A - 72MHz Cortex-M3 32KB MCU | STMicroelectronics
STM32F103C6T6A

STM32F103C6T6A - 72MHz Cortex-M3 32KB MCU | STMicroelectronics

The STMicroelectronics STM32F103C6T6A is a low-density, 32-bit ARM Cortex-M3 microcontroller operating at up to 72 MHz, with 32 KB of Flash memory and a 48-pin LQFP package measuring 7 x 7 mm. It belongs to the STM32F103 performance-line family and integrates USB, CAN, six timers, two ADCs, and six communication interfaces for compact embedded-control designs. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals in one integrated circuit. In the product hierarchy, the STM32F103C6T6A is an MCU, embedded controller, and semiconductor. Its ARM Cortex-M3 RISC core provides deterministic instruction execution while integrated communications and analog peripherals reduce the need for external components in control, monitoring, and communications equipment. Key features include 72 MHz maximum core frequency, 32 KB Flash, and a 1.25 DMIPS/MHz performance figure. Peripheral integration includes USB, CAN, six timers, and two ADCs. The six communication interfaces support systems that must exchange data through serial or bus-based protocols. The 48-LQFP 7 x 7 mm package is suitable for conventional surface-mount PCB assembly while exposing a broad set of general-purpose and peripheral pins. The STM32F103C6 family is positioned as a low-density performance-line device. The verified product information identifies the 32-bit core, 72 MHz operating rate, 32 KB Flash configuration, and broad peripheral mix, but it does not provide verified RAM capacity, voltage limits, pin-level functions, or operating-temperature values. Those details should therefore be confirmed against the current STMicroelectronics datasheet and device documentation before schematic release. Typical applications include USB-connected data acquisition, CAN-connected industrial modules, digital control equipment, compact sensor nodes, communication interfaces, and general embedded-control boards. The two ADCs support analog measurement, while six timers support timing, counting, PWM, and motor-control functions. The integrated USB and CAN interfaces are particularly useful where wired connectivity is required without external protocol controllers. A key design consideration is avoiding assumption-based pin or peripheral mapping. Because the supplied verified results do not enumerate the 48 package connections, engineers should use the official STM32F103x4 and STM32F103x6 documentation to confirm power pins, oscillator connections, debug functions, and peripheral multiplexing before layout or firmware development. This page combines verified manufacturer and distributor specifications, a package-aware comparison, practical migration guidance, and drop-in alternative information. It also distinguishes confirmed facts from parameters that still require datasheet verification, helping engineers evaluate the STM32F103C6T6A without relying on unsupported assumptions.

RFQ Liên hệ
STM32F103C6T6ATR - 72MHz Cortex-M3 32KB MCU | STMicroelectronics (Tape & Reel)
STM32F103C6T6ATR

STM32F103C6T6ATR - 72MHz Cortex-M3 32KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F103C6T6ATR is a low-density, 32-bit ARM Cortex-M3 microcontroller operating at up to 72 MHz, with 32 KB of Flash memory and a 48-pin LQFP package measuring 7 x 7 mm. It belongs to the STM32F103 performance-line family and integrates USB, CAN, six timers, two ADCs, and six communication interfaces for compact embedded-control designs. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals in one integrated circuit. In the product hierarchy, the STM32F103C6T6ATR is an MCU, embedded controller, and semiconductor. Its ARM Cortex-M3 RISC core provides deterministic instruction execution while integrated communications and analog peripherals reduce the need for external components in control, monitoring, and communications equipment. Key features include 72 MHz maximum core frequency, 32 KB Flash, and a 1.25 DMIPS/MHz performance figure. Peripheral integration includes USB, CAN, six timers, and two ADCs. The six communication interfaces support systems that must exchange data through serial or bus-based protocols. The 48-LQFP 7 x 7 mm package is suitable for conventional surface-mount PCB assembly while exposing a broad set of general-purpose and peripheral pins. The STM32F103C6 family is positioned as a low-density performance-line device. The verified product information identifies the 32-bit core, 72 MHz operating rate, 32 KB Flash configuration, and broad peripheral mix, but it does not provide verified RAM capacity, voltage limits, pin-level functions, or operating-temperature values. Those details should therefore be confirmed against the current STMicroelectronics datasheet and device documentation before schematic release. Typical applications include USB-connected data acquisition, CAN-connected industrial modules, digital control equipment, compact sensor nodes, communication interfaces, and general embedded-control boards. The two ADCs support analog measurement, while six timers support timing, counting, PWM, and motor-control functions. The integrated USB and CAN interfaces are particularly useful where wired connectivity is required without external protocol controllers. A key design consideration is avoiding assumption-based pin or peripheral mapping. Because the supplied verified results do not enumerate the 48 package connections, engineers should use the official STM32F103x4 and STM32F103x6 documentation to confirm power pins, oscillator connections, debug functions, and peripheral multiplexing before layout or firmware development. This page combines verified manufacturer and distributor specifications, a package-aware comparison, practical migration guidance, and drop-in alternative information. It also distinguishes confirmed facts from parameters that still require datasheet verification, helping engineers evaluate the STM32F103C6T6ATR without relying on unsupported assumptions.

RFQ Liên hệ
STM32F103C6T7A - 32-Bit 72MHz Cortex-M3 MCU | STMicroelectronics
STM32F103C6T7A

STM32F103C6T7A - 32-Bit 72MHz Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32F103C6T7A is a 32-bit ARM Cortex-M3 RISC microcontroller operating at 72 MHz, with 32 KB of Flash memory, 10 KB of SRAM, and a 48-LQFP 7 x 7 mm package. It operates from a 2.5 V or 3.3 V supply and belongs to the STM32F103 low-density performance-line family. The combination of a 72 MHz Cortex-M3 core, compact 48-pin surface-mount package, and 32 KB embedded Flash makes the device suitable for compact embedded control, sensing, communications, and actuator-management systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripheral interfaces, and control logic on one IC. In the STM32 hierarchy, the STM32F103C6T7A is an ARM Cortex-M3 microcontroller, a 32-bit RISC controller within the STM32F1 family and the broader embedded microcontroller and semiconductor categories. Its low-density designation indicates a balance between processing capability, memory capacity, package size, and cost rather than the resources associated with the largest STM32F1 devices. The verified configuration provides a maximum core frequency of 72 MHz and 32 KB of Flash organized as 32K x 8. The device also includes 10 KB of SRAM. Its 48-LQFP package exposes 48 pins on a 7 x 7 mm body and is suitable for automated assembly and access to the family’s communication and control peripherals. The 2.5 V and 3.3 V operating options support conventional industrial and embedded system rails, while the manufacturer identifies the part as an ARM Cortex-M3 performance-line MCU. The STM32F103 architecture uses a 32-bit ARM Cortex-M3 RISC core. Compared with an 8-bit microcontroller, the 32-bit instruction set and 72 MHz operating point provide greater arithmetic and control throughput for protocols, state machines, and real-time tasks. Memory remains the principal system constraint: the 32 KB Flash footprint can hold the application firmware, while the 10 KB SRAM provides working memory for stacks, buffers, and control data. Typical uses include industrial sensor nodes, compact motor-control and actuator boards, embedded communication equipment, measurement instruments, and general-purpose industrial control modules. The 48-pin LQFP provides more exposed connections than a small-outline package while retaining a manageable board area. These applications must be reviewed against the manufacturer datasheet for the exact peripheral mix, pin multiplexing, clock configuration, electrical limits, and startup requirements. A primary design consideration is firmware and ecosystem continuity. Designs should reserve the required programming and debug connections, validate all 48 pin assignments against the datasheet, and confirm that the 32 KB Flash and 10 KB SRAM budgets remain adequate. Because the exact peripheral and pin functions are not included in the supplied verified excerpts, they must not be inferred from other STM32F103 members. This page consolidates the verified manufacturer and distributor identity, memory and clock data, package information, pricing, drop-in sourcing considerations, and application guidance into a focused engineering record. It also distinguishes directly supported specifications from information that still requires confirmation from the manufacturer datasheet.

RFQ Liên hệ