Vi điều khiển

Sản phẩm (20.000+)

ATXMEGA32D4-CU - 32MHz 32KB Flash MCU | Microchip
ATXMEGA32D4-CU

ATXMEGA32D4-CU - 32MHz 32KB Flash MCU | Microchip

The Microchip Technology ATXMEGA32D4-CU is a high-performance, low-power 8/16-bit AVR XMEGA D4 microcontroller with a 32 MHz clock, 32 KB of ISP Flash memory, 1 KB of EEPROM, 4 KB of SRAM, and a 49-VFBGA 5 x 5 mm package. It combines 34 general-purpose I/O lines with a four-channel event system, programmable multilevel interrupts, four flexible 16-bit timer/counters, two USARTs, and two TWI serial interfaces. An AVR XMEGA microcontroller is an 8/16-bit embedded-control IC based on the enhanced AVR RISC architecture. Within the product hierarchy, it is a microcontroller, embedded processor, and programmable controller designed for low-power industrial, consumer, communications, and real-time control systems. Unlike a general-purpose desktop processor, it combines flash program memory, data EEPROM, SRAM, event handling, timers, and serial communications on one integrated device. The ATXMEGA32D4 family provides 32 KB of in-system-programmable flash with read-while-write operation and a dedicated 4 KB boot-code section. Its 1 KB EEPROM supports nonvolatile parameter storage, while 4 KB of SRAM accommodates working data and interrupt-intensive control tasks. A 16-bit real-time counter and four 16-bit timer/counters provide deterministic timing, compare, and PWM functions for motor, lighting, and industrial automation systems. Its event-system architecture allows hardware routing between peripherals, reducing the processor intervention required for time-critical signal relationships. The programmable multilevel interrupt controller and two USARTs support asynchronous serial communication, while the two TWI interfaces support connected peripherals over a two-wire bus. The combination of 34 I/O lines and multiple communication peripherals makes the device useful where compactness and peripheral integration are important. Typical uses include industrial sensor controllers, building-automation nodes, compact communication equipment, motor-control helpers, low-power embedded products, and control systems requiring deterministic event handling. The ATXMEGA32D4 family is also suitable for general AVR-based embedded development when more timing and communication resources are required than a basic 8-bit AVR provides. A key design consideration is the 49-VFBGA footprint, which is compact but demands careful PCB layout, fine-pitch assembly, and inspection. Designers must follow the manufacturer's package drawing and pin-assignment documentation exactly, provide suitable decoupling, and verify the operating voltage configuration before programming the device. The supplied search data includes differing voltage-range summaries, so the electrical limits should be confirmed against the manufacturer datasheet for the selected device. This page consolidates the verified manufacturer and distributor information, identifies same-family drop-in options, and adds practical application guidance, comparison data, and design cautions that are not presented as a complete substitute for the manufacturer datasheet. Verified pricing, detailed pin assignments, lifecycle guarantees, and package drawings should be confirmed with the cited sources before production release.

RFQ Liên hệ
ATXMEGA32D4-MH - 32MHz AVR XMEGA MCU | Microchip Technology
ATXMEGA32D4-MH

ATXMEGA32D4-MH - 32MHz AVR XMEGA MCU | Microchip Technology

The Microchip Technology ATXMEGA32D4-MH is a low-power 8/16-bit AVR XMEGA D4 microcontroller operating at up to 32 MHz, with 32 KB of ISP Flash memory, 1 KB of EEPROM, 4 KB of SRAM, and 34 general-purpose I/O lines in a 44-VQFN 7 x 7 mm package. It combines a high-performance AVR enhanced RISC core with a four-channel event system and a programmable multilevel interrupt controller for responsive control applications. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one compact device. In the product hierarchy, the ATXMEGA32D4-MH belongs to the AVR XMEGA D4 family of low-power microcontrollers, combining embedded flash, SRAM, EEPROM, serial interfaces, timers, and event-control hardware. Its memory arrangement supports firmware storage, working data, and nonvolatile parameter retention without requiring external memory. Key features include 32 KB of in-system programmable flash with read-while-write capability, a 4 KB boot-code section, 1 KB of EEPROM, and 4 KB of SRAM. The device provides 34 general-purpose I/O lines, two USARTs, two two-wire serial interfaces, two SPI interfaces, four flexible 16-bit timer/counters, and a 16-bit real-time counter. A four-channel event system connects peripherals directly, reducing CPU intervention in timing-sensitive control loops. The AVR enhanced RISC architecture executes instructions in a single clock cycle, approaching one million instructions per second per megahertz. At a 32 MHz operating frequency, this architecture supports deterministic embedded control while retaining the simplicity of an 8-bit programming model with 16-bit working registers. The device also supports a programmable multilevel interrupt controller for organizing events across multiple peripheral priorities. Typical uses include industrial control, sensor acquisition, compact automation controllers, communication equipment, and low-power embedded products. Two USARTs and two TWI interfaces allow connection to sensors, converters, and peer controllers, while the timer and event-system resources support motor, timing, and waveform-control functions. The 44-VQFN package also permits a compact PCB footprint when its exposed thermal pad and layout requirements are handled correctly. Design the PCB around the manufacturer's QFN pinout and thermal-pad guidance, including adequate ground-plane connection, short power and signal paths, and clean decoupling close to supply pins. Confirm the exact pin multiplexing, alternate-function constraints, clock options, and programming configuration in the manufacturer datasheet before finalizing the schematic or footprint. This product page combines the manufacturer's XMEGA D4 specifications with practical interface, PCB-layout, and component-selection guidance. It also distinguishes verified memory, clock, package, and peripheral details from parameters that require confirmation for a specific board design.

RFQ Liên hệ
ATXMEGA32E5-AN - 32MHz 32KB MCU | Microchip Technology
ATXMEGA32E5-AN

ATXMEGA32E5-AN - 32MHz 32KB MCU | Microchip Technology

The Microchip Technology ATXMEGA32E5-AN is an 8/16-bit AVR XMEGA E5 microcontroller with a maximum clock frequency of 32 MHz, 32 KB of ISP Flash memory, a 4 KB boot-code section, 1 KB of EEPROM, 4 KB of SRAM, and a 32-pin TQFP package measuring 7 mm by 7 mm. The device combines read-while-write Flash operation with an eight-channel event system and programmable multi-level interrupt handling. It operates from 1.6 V to 3.6 V and is identified by distributor listings as a green, 105°C-rated TQFP device. An 8/16-bit AVR XMEGA microcontroller is a compact embedded-control component that combines a processor core, nonvolatile program memory, data memory, interrupt handling, timers, communication peripherals, and analog or digital I/O on one integrated circuit. In the product hierarchy, it is an MCU, then a microcontroller, then an embedded semiconductor. This integration allows a compact control design to replace separate processor, memory, and peripheral circuitry while retaining deterministic event-driven behavior. The ATXMEGA32E5-AN's principal advantages include 32 KB of Flash, 4 KB of SRAM, 1 KB of EEPROM, a dedicated 4 KB boot section, and support for read-while-write operation. Its eight-channel event system can connect peripherals directly so that timer, comparator, or other events trigger actions without continuous processor polling. The 32 MHz clock provides substantially more instruction throughput than lower-speed 8-bit designs, while the 32-pin package keeps the device practical for compact embedded boards. The device belongs to the AVR enhanced RISC architecture family and is positioned as a low-power, peripheral-rich control platform. Read-while-write capability can support firmware updates or data manipulation in Flash without requiring every program-memory access to stop the entire device. The combination of event-system hardware, programmable interrupt levels, 1.6 V to 3.6 V operation, and separate boot space makes the ATXMEGA32E5-AN useful where deterministic event routing and in-system programmability are more important than a larger general-purpose MCU footprint. Typical uses include compact industrial controllers, connected sensor nodes, building and access-control modules, data acquisition units, communication equipment, and low-power embedded products. The 32 KB Flash capacity supports a meaningful application program, while 4 KB SRAM accommodates working state and buffers. The 1 KB EEPROM provides nonvolatile parameter storage, and the 4 KB boot section allows a bootloader to remain available when application firmware is updated. Designers should use the Microchip ATxmega32E5 family data sheet as the authoritative source for the complete 32-pin assignment, clock configuration, peripheral multiplexing, and electrical limits. The ATXMEGA32E5-AN uses the -AN package and temperature designation, so board designs must preserve its TQFP-32 footprint, supply range, and pin functions rather than assuming compatibility with the smaller QFN packaging of another ATxmega32E5 ordering code. Firmware and peripheral migrations should likewise be checked against the family data sheet. This page consolidates the verified manufacturer and distributor facts for the ATXMEGA32E5-AN with same-footprint selection guidance, package-aware alternatives, comparison parameters, and practical engineering considerations. It also distinguishes confirmed ATxmega32E5-AN attributes from ordering variants that require firmware, footprint, and temperature verification before substitution.

RFQ Liên hệ
ATXMEGA32E5-AU 32MHz 32KB AVR MCU | Microchip Technology
ATXMEGA32E5-AU

ATXMEGA32E5-AU 32MHz 32KB AVR MCU | Microchip Technology

The Microchip Technology ATXMEGA32E5-AU is an 8/16-bit AVR XMEGA E5 microcontroller with a 32 MHz operating frequency, 32 KB of ISP Flash memory, and a 32-pin TQFP package. It is designed for low-power, high-performance embedded control applications that require read-while-write Flash operation, 1 KB of EEPROM, 4 KB of SRAM, and an eight-channel event system. A microcontroller is an integrated semiconductor containing a processor core, program memory, data memory, and peripherals on one device. The ATXMEGA32E5 belongs to the hierarchy of 8/16-bit AVR embedded controllers, XMEGA microcontrollers, microcontrollers, and integrated circuits. Its enhanced RISC architecture combines a wide register file with event-driven peripherals, making it suitable for real-time control systems where predictable external event handling is important. The E5 family combines 32 KB of Flash with 1 KB of EEPROM and 4 KB of SRAM. Read-while-write capability allows the program Flash region to remain accessible during programming operations, while the separate boot section supports boot-loader designs. An eight-channel event system and programmable multi-level interrupts help connect timers, communication interfaces, external signals, and application logic without excessive polling. The operating supply range is 1.6 V to 3.3 V, allowing the controller to operate across low-voltage embedded systems. The ATXMEGA32E5-AU ordering code is associated with a 32-pin TQFP package and an industrial-temperature, green-product configuration according to the distributor product description. Its 32 MHz maximum frequency provides substantially more processing headroom than conventional 8-bit AVR devices while retaining the AVR instruction set and ecosystem. Typical applications include industrial sensor controllers, building automation equipment, compact data acquisition systems, motor and actuator controllers, communication equipment, and low-power embedded products. The combination of event-system hardware, flash memory, and multiple serial peripherals is particularly useful when a design must respond to external events with deterministic timing while keeping the software structure relatively compact. Designers should confirm the complete pin assignment and peripheral multiplexing in the manufacturer datasheet before routing a board. Decoupling, programming-interface access, clock configuration, exposed analog functions, and the selected package dimensions should be reviewed together, especially when the operating voltage is near 1.6 V. This product page combines the manufacturer specifications, package information, functional application guidance, comparison points, and drop-in candidates identified from family documentation. It also distinguishes exact-memory options from lower-memory XMEGA E5 variants so engineers can assess PCB reuse without assuming that every family member has identical firmware requirements.

RFQ Liên hệ
ATXMEGA32E5-MN - 32MHz 32KB Flash MCU | Microchip
ATXMEGA32E5-MN

ATXMEGA32E5-MN - 32MHz 32KB Flash MCU | Microchip

Microchip Technology ATXMEGA32E5-MN is an 8/16-bit AVR XMEGA E5 microcontroller operating at 32 MHz with 32 KB of ISP Flash memory, 4 KB of SRAM, and 1 KB of EEPROM in a 32-pin 5 x 5 mm VQFN package. It operates from a 1.6 V to 3.6 V supply and combines a 32 MHz AVR enhanced RISC core with a peripheral-rich mixed-signal architecture. An XMEGA microcontroller is a low-power 8/16-bit RISC controller that integrates a fast CPU, timers, event-system hardware, analog converters, communication peripherals, and memory on a single device. The E5 family is positioned between basic 8-bit AVR devices and larger 32-bit microcontrollers, providing deterministic event handling and high peripheral integration for embedded control systems. Key features include 32 KB of ISP Flash with read-while-write capability, a dedicated 4 KB boot-code section, 1 KB of EEPROM, and 4 KB of SRAM. The eight-channel event system links peripherals directly so that timer, comparator, and other events can trigger internal actions without polling overhead. The device also operates from a 1.6 V to 3.6 V supply, supports 32 MHz operation, and is offered in a compact 32-pin VQFN package. The ATxmega32E5 architecture provides a strong balance of processing performance, analog resources, and power efficiency. Its 32 MHz clock allows deterministic control loops and responsive peripheral servicing, while the XMEGA event system reduces interrupt latency and simplifies timing-sensitive designs. The 32 KB flash configuration is suitable for protocol stacks, motor-control algorithms, and moderately complex control firmware. Typical uses include industrial sensor controllers, compact motor-control nodes, building automation, battery-powered measurement equipment, communication gateways, and embedded instrumentation. The low operating-voltage range also supports energy-conscious designs in which the MCU is powered directly from a regulated low-voltage rail. PCB design should follow the exposed-pad and thermal-pad recommendations in the manufacturer datasheet. Place all decoupling capacitors close to their designated pins, route the exposed pad to a low-impedance ground plane, and confirm the recommended crystal or clock configuration before layout release. This page consolidates device specifications, package details, drop-in alternatives, application guidance, and design considerations into an engineering-focused reference for component selection, schematic review, and PCB layout planning.

RFQ Liên hệ
ATXMEGA32E5-MU - 32MHz 32KB AVR MCU | Microchip Technology
ATXMEGA32E5-MU

ATXMEGA32E5-MU - 32MHz 32KB AVR MCU | Microchip Technology

The Microchip Technology ATXMEGA32E5-MU is an 8/16-bit AVR XMEGA E5 microcontroller with a 32 MHz operating frequency, 32 KB of flash memory, 4 KB of SRAM, 1 KB of EEPROM, and a 32-pin QFN package measuring 5 x 5 mm. The -MU suffix denotes the green industrial-temperature configuration listed for this device. It combines a high-performance, low-power AVR enhanced RISC core with an event system and extensive peripheral integration in a compact surface-mount package. An 8/16-bit microcontroller is a programmable semiconductor that combines a CPU core, nonvolatile program memory, volatile working memory, and peripherals such as timers, serial interfaces, and event-control hardware. The AVR enhanced RISC architecture belongs to the microcontroller hierarchy and supports efficient control-oriented instruction execution. Microchip positions the XMEGA E5 family between general-purpose embedded control and higher-performance 8/16-bit applications requiring rich event handling and flexible timing resources. The ATXMEGA32E5 provides 32 KB of in-system programmable flash, with read-while-write capability, plus a 4 KB boot-code section. Its 4 KB SRAM provides working space for application state, buffers, and stack operations, while 1 KB of EEPROM supports nonvolatile data retention. The eight-channel event system can connect peripherals directly, reducing processor intervention for timing-sensitive tasks. A programmable multi-level interrupt system helps organize responses across the integrated peripherals. The AVR XMEGA E5 architecture integrates flash, SRAM, EEPROM, the event system, interrupt handling, and communication peripherals on one device. Its 32 MHz clock rate gives designers additional timing resolution and processing capacity compared with lower-clocked 8-bit controllers. The family is designed for low-power, peripheral-rich embedded control, making it appropriate for designs in which deterministic peripheral interaction matters as much as conventional sequential software execution. Typical uses include industrial control modules, compact sensor nodes, motor-control peripherals, communications equipment, and mixed-signal embedded systems. Its 32 KB flash is suitable for moderate firmware loads, while the event system is especially useful when timers, counters, waveform generation, or peripheral-to-peripheral signaling must be coordinated without continuous central-processor polling. The 5 x 5 mm QFN also supports space-constrained boards requiring more integration than a small 8-pin device can offer. When laying out a board, follow the manufacturer pin-description and package-drawing tables rather than relying on generic QFN conventions. Keep the device's decoupling capacitors close to the appropriate supply pins and route programming, reset, and communications signals with attention to noise immunity. Confirm the complete peripheral mix, clock plan, and pin assignments in the manufacturer datasheet before finalizing the PCB footprint. This product page combines the ATXMEGA32E5 family specifications, package information, sourcing guidance, application fit, and drop-in replacement analysis with practical design considerations. It helps engineers compare memory, package, architecture, and lifecycle considerations before committing the 32-QFN footprint to a design.

RFQ Liên hệ
ATXMEGA64A1-AU - 32MHz 64KB Flash MCU | Microchip Technology
ATXMEGA64A1-AU

ATXMEGA64A1-AU - 32MHz 64KB Flash MCU | Microchip Technology

The Microchip Technology ATXMEGA64A1-AU is a low-power, high-performance 8/16-bit AVR XMEGA A1 microcontroller with a 32 MHz clock, 64 KB of self-programming Flash memory, 4 KB of SRAM, and a 100-lead TQFP package measuring 14 mm by 14 mm. It combines an enhanced RISC core with four-channel DMA, an eight-channel event system, a programmable multilevel interrupt controller, and extensive timer and communications peripherals. The -AU ordering code identifies the industrial-temperature 100-lead TQFP configuration. An 8/16-bit microcontroller is a programmable semiconductor that integrates a CPU, nonvolatile program memory, data memory, interrupt handling, and peripherals into one device. The ATXMEGA64A1-AU belongs to the AVR XMEGA family, which extends the AVR architecture into a higher-performance 8/16-bit platform with simultaneous operation of two 16-bit registers and hardware accelerators for data movement and event routing. The 64 KB Flash program memory includes a 4 KB boot-code section and supports read-while-write operation. Internal memory is completed by 4 KB of SRAM and 2 KB of EEPROM. Peripheral integration includes four-channel DMA, an eight-channel event system, 78 general-purpose I/O lines, a 16-bit real-time counter, and eight flexible 16-bit timer/counter modules with compare and PWM channels. These resources reduce external logic and improve responsiveness in embedded control designs. The enhanced AVR RISC architecture executes instructions in a single clock cycle and delivers throughput approaching 1 MIPS per MHz. Its integrated peripherals can transfer data without repeated CPU intervention, while the event system connects timer, comparator, ADC, and other peripherals through configurable event channels. The ATXMEGA64A1-AU therefore supports responsive embedded control without requiring a separate DSP or high-speed external bus interface for many common tasks. Typical uses include industrial automation controllers, data acquisition systems, motor-control and PWM platforms, communications equipment, and connected sensor nodes. The device is particularly useful when a design needs more peripheral capacity and processing throughput than a small 8-bit MCU, while retaining the familiar AVR development ecosystem and integrated on-chip memories. PCB implementation should preserve the manufacturer's recommended power, clock, decoupling, programming, and signal-routing arrangements. The 100-lead TQFP footprint requires careful escape routing around the device, while the 1.6 V to 3.6 V operating range requires attention to regulator tolerance, signal levels, and load-dependent voltage droop. This product page organizes the core device specifications, package information, design considerations, application guidance, and pin-compatible family alternatives into a single engineering reference for MCU selection and board design.

RFQ Liên hệ
ATXMEGA64A1-CU - 32MHz 64KB AVR MCU | Microchip Technology
ATXMEGA64A1-CU

ATXMEGA64A1-CU - 32MHz 64KB AVR MCU | Microchip Technology

Microchip Technology ATXMEGA64A1-CU is an 8/16-bit AVR XMEGA A1 microcontroller operating at 32 MHz, with 64 KB of self-programming Flash memory, 4 KB SRAM and 2 KB EEPROM in a 100-CBGA package measuring 9 mm by 9 mm. The device operates from a 1.6 V to 3.6 V supply and provides 34 I/O ports. Its integrated peripherals include a direct memory access controller, PWM channels, brown-out detection and reset, power-on reset and a watchdog timer. The MCU is intended for low-power, high-performance embedded designs that require substantial Flash storage, rapid peripheral access and a compact surface-mount package. According to Microchip, the ATxmega64A1 family is not recommended for new designs and Microchip identifies ATxmega64A1U as its preferred successor. An 8/16-bit AVR microcontroller is a compact embedded-processing device that combines a processor core, nonvolatile program memory, volatile working memory, communication peripherals and mixed-signal or timing functions on one integrated circuit. In the product hierarchy, the ATXMEGA64A1-CU is an MCU, part of the broader integrated-circuit and embedded-processing categories. Its XMEGA architecture supports 8-bit and 16-bit instruction execution, making it useful where deterministic control, moderate arithmetic performance and low system complexity are more important than the application processor performance of a high-end Cortex-M device. The MCU's 32 MHz operating frequency is its principal performance figure, while its 64 KB Flash memory provides room for application code and boot code. The manufacturer product page also identifies a 4 KB boot-code section, 4 KB SRAM and 2 KB EEPROM. Brown-out detection, power-on reset and the watchdog timer support reliable startup and continued operation. Four-channel DMA reduces peripheral data-transfer overhead, while the PWM and external bus interface extend its usefulness for motor control, industrial automation and connected embedded equipment. The 1.6 V to 3.6 V operating range permits use with common low-voltage digital rails. The 100-CBGA package provides 100 ball-grid connections and a compact 9 mm by 9 mm footprint, but its fine-pitch ball array requires a PCB with high-quality routing and assembly capability. Unlike a simple microcontroller package, a CBGA also demands careful power-plane design, via-in-pad or equivalent escape-routing strategies, and assembly processes capable of handling the package's fine pitch. The manufacturer lists this family as not recommended for new designs, so lifecycle planning is essential. Typical applications include industrial automation controllers, compact motor-control systems, sensor-conditioning hubs, communication modules and low-power embedded products. The combination of DMA, PWM, 64 KB Flash and a 32 MHz clock is especially useful in cost-sensitive systems that need several concurrent control functions without using a higher-complexity processor. Because the part is not recommended for new designs, engineers should evaluate ATxmega64A1U before committing a new PCB to this package. The primary design consideration is package and lifecycle risk. ATXMEGA64A1-CU can be maintained in an existing 100-CBGA design, but new products should verify recommended-device migration, pin compatibility, memory-map differences, toolchain support and long-term procurement before committing. The verified distributor data does not provide a complete ball assignment or exposed-pad connection, so the package drawing must be checked against the current Microchip documentation before PCB release. This page consolidates the verified manufacturer and distributor specifications, lifecycle guidance, pricing, package constraints and same-family migration information. It also distinguishes the legacy ATXMEGA64A1-CU from the manufacturer-recommended ATxmega64A1U path and identifies which replacement decisions still require pin-level validation rather than relying on broad functional similarity.

RFQ Liên hệ
ATXMEGA64A3-AU - 64KB Flash AVR XMEGA A3 MCU 32MHz TQFP-64 | Microchip
ATXMEGA64A3-AU

ATXMEGA64A3-AU - 64KB Flash AVR XMEGA A3 MCU 32MHz TQFP-64 | Microchip

The Microchip Technology ATXMEGA64A3-AU is an 8/16-bit AVR XMEGA A3 microcontroller delivering 32 MIPS throughput at 32 MHz, with 64 KB of in-system programmable Flash, 4 KB SRAM, 2 KB EEPROM, and 4 KB boot code section, housed in a 64-pin TQFP (14x14 mm) package. It integrates a 4-channel DMA controller, an 8-channel event system, a programmable multi-level interrupt controller, and a 16-bit Real Time Counter (RTC). The device operates from 1.6 V to 3.6 V, making it suitable for both battery-powered and 3.3 V regulated rails. An AVR XMEGA microcontroller is a high-performance 8/16-bit RISC architecture that extends the classic AVR core with a wider instruction set, hardware multiplier, and rich on-chip peripherals. Within the broader taxonomy, the ATXMEGA64A3 belongs to the XMEGA A3 family, which is the general-purpose branch of the XMEGA line designed for low-power embedded control with deterministic interrupt handling and event-driven peripherals. The XMEGA core architecture (AVR -> 8-bit MCU -> microcontroller -> semiconductor) achieves 1 MIPS per MHz efficiency, so a 32 MHz clock produces 32 MIPS of compute, an attractive ratio for power-constrained designs. Key features include 50 general-purpose I/O lines, seven 16-bit Timer/Counters with PWM and compare modes, seven USARTs, two two-wire interfaces (TWI/I2C), two SPI peripherals, a 12-bit ADC and 12-bit DAC, a four-channel DMA controller, and a cryptographic AES/DES engine. The self-programmable Flash supports Read-While-Write, allowing firmware updates without halting application code execution, while the on-chip boot section enables secure bootloader-based field upgrades. The 64-pin TQFP (14x14 mm) is a mature surface-mount package with reliable manufacturability and good thermal performance for moderate-power designs. The 1.6 V minimum supply extends the part into single-cell Li-ion (nominally 3.7 V) and energy-harvesting applications, while the on-chip peripherals reduce external component count. The architecture's deterministic interrupt latency and peripheral event system make it particularly well suited to real-time control loops. Typical applications include industrial sensor hubs, building automation controllers, smart metering nodes, USB device bridges, HMI panels with TFT drives, and low-power wireless sensor nodes. Designers typically select this part when they need deterministic event handling, generous on-chip peripherals, and the flexibility of a self-programmable Flash with bootloader support, all at low supply voltage. When designing with this device, ensure that VDDCORE is properly decoupled and that PDI/PDO programming lines are accessible on the board for in-system programming. The XMEGA event system routes peripheral triggers without CPU intervention, so designers should map out event channels before committing to a final pinout. Peripherals not in use should be clock-gated via the PR register to minimize power draw in sleep modes. This page synthesizes distributor pricing, drop-in XMEGA A3 alternatives, package-aware comparison, and design notes not found in the standalone manufacturer datasheet.

RFQ Liên hệ
ATXMEGA64A3-MH - 32MHz 64KB AVR Microcontroller | Microchip
ATXMEGA64A3-MH

ATXMEGA64A3-MH - 32MHz 64KB AVR Microcontroller | Microchip

The Microchip Technology ATXMEGA64A3-MH is a low-power 8/16-bit AVR XMEGA A3 microcontroller with a 32 MHz clock, 64 KB of self-programming Flash memory, 4 KB SRAM, and 2 KB EEPROM in a 64-QFN (9 x 9 mm) package. It provides up to 32 MIPS throughput and operates from 1.6 V to 3.6 V. An AVR XMEGA microcontroller is an embedded semiconductor that combines a processor core, program and data memory, communication peripherals, timers, and event-management hardware in one device. The XMEGA A3 family sits within the broader hierarchy of 8/16-bit AVR microcontrollers, embedded controllers, and microcontrollers used for low-power control and signal-processing applications. The ATXMEGA64A3-MH includes 64 KB of Flash organized as 32K x 16, a separate 4 KB boot-code section, 4 KB SRAM, and 2 KB EEPROM. Its four-channel DMA controller and eight-channel event system allow data movement and event routing between peripherals without requiring every transfer to be handled directly by the CPU. At a maximum clock of 32 MHz, the device delivers up to 32 MIPS throughput. This processing capability, together with the 16-bit Flash organization and event-system architecture, supports responsive control loops and coordinated peripheral operations while maintaining the low-power characteristics associated with the AVR XMEGA family. Typical uses include industrial control, sensor acquisition, communication modules, low-power embedded systems, and compact control platforms. The 1.6 V to 3.6 V operating range makes the device suitable for low-voltage embedded systems, while 64 KB of Flash provides room for firmware, configuration data, and a boot section within one microcontroller. Designers should verify the complete 64-pin pinout, exposed-pad connection, clock configuration, decoupling requirements, and peripheral assignments against the manufacturer datasheet before layout. The 64-QFN footprint also requires careful thermal-via placement and PCB-land-pattern verification to maintain reliable heat transfer from the exposed pad. This page consolidates verified manufacturer and distributor information, separates the exact ATXMEGA64A3-MH characteristics from related family variants, and identifies which drop-in alternatives require firmware or peripheral review before substitution.

RFQ Liên hệ
ATXMEGA64A4U-AU - 64KB Flash 32 MIPS AVR XMEGA MCU | Microchip
ATXMEGA64A4U-AU

ATXMEGA64A4U-AU - 64KB Flash 32 MIPS AVR XMEGA MCU | Microchip

The Microchip Technology ATXMEGA64A4U-AU is a low-power, high-performance 8/16-bit AVR XMEGA A4U microcontroller delivering up to 32 MIPS throughput at 32 MHz, with 64 KB of self-programming Flash, 4 KB SRAM, 2 KB EEPROM and a 4 KB boot code section, housed in a 44-pin TQFP package rated for industrial temperature (-40C to +85C) operation from 1.6 V to 3.6 V. An AVR XMEGA microcontroller is a member of the 8/16-bit RISC microcontroller family that combines an enhanced Harvard architecture with rich on-chip peripherals such as DMA, an event system and a USB 2.0 Full-Speed controller. In the broader taxonomy it sits under MCU -> RISC microcontroller -> embedded controller -> semiconductor. The XMEGA series is engineered for deterministic, low-latency I/O handling at modest clock rates while keeping active and sleep current far below typical ARM Cortex-M parts. Key features include a 4-channel DMA controller, an 8-channel peripheral event system that lets peripherals trigger each other without CPU intervention, a hardware AES/DES crypto engine, a 12-bit 1 MSPS ADC, two 12-bit DACs and an integrated USB 2.0 Full-Speed device/host controller. The device also exposes an external bus interface for memory-mapped peripherals and provides up to 34 programmable I/O pins with configurable drive strength and slew-rate control. The A4U die is implemented on a low-leakage CMOS process, and the core supports 136 new instructions including hardware multiply, single-cycle GPIO access and atomic bit manipulation. The integrated peripheral event system routes peripheral-to-peripheral triggers across the device with deterministic sub-microsecond latency, allowing sensor data acquisition and PWM updates to occur while the core sleeps, dramatically lowering average power for battery-powered designs. Typical applications include USB human-interface devices such as keyboards, mice and game controllers, industrial sensor hubs, portable medical monitors, USB-to-UART bridge dongles, low-power IoT edge nodes and battery-backed data loggers. The wide 1.6 V to 3.6 V supply range is well suited to single-cell Li-ion and 2xAA chemistries. When designing with this part, place the 0.1 uF VCC decoupling caps adjacent to each power pin and follow the USB DP/DN 90-ohm differential layout rules to maintain USB-IF compliance. The internal 32 kHz calibrated oscillator can serve as the RTC source without an external crystal for cost-sensitive designs. This page synthesizes distributor pricing, drop-in alternatives within the XMEGA family and practical design notes not aggregated by DigiKey, Mouser or Octopart.

RFQ Liên hệ
ATXMEGA64A4U-MH - 64KB Flash XMEGA A4U 32MHz MCU | Microchip
ATXMEGA64A4U-MH

ATXMEGA64A4U-MH - 64KB Flash XMEGA A4U 32MHz MCU | Microchip

The Microchip Technology (formerly Atmel) ATXMEGA64A4U-MH is a low-power, high-performance 8/16-bit AVR XMEGA A4U microcontroller integrating 64 KB of self-programming Flash, 4 KB boot code section, 4 KB SRAM, and 2 KB EEPROM in a 44-pin VQFN (7x7) package. It runs up to 32 MHz, supports an operating voltage range of 1.6 V to 3.6 V, and exposes 34 general-purpose I/O lines plus an external bus interface for memory-mapped peripherals. An XMEGA A4U microcontroller is a member of the AVR enhanced RISC architecture family aimed at low-power, peripheral-rich embedded designs. Within the broader hierarchy, the ATXMEGA64A4U-MH sits between classic ATmega 8-bit MCUs (simpler peripherals, lower DMA integration) and ARM Cortex-M devices (higher MIPS, wider 32-bit datapath). The XMEGA line is purpose-built for deterministic event-driven control with hardware-accelerated data movement, bridging the gap between traditional 8-bit AVR and 32-bit ARM designs. Key features include a four-channel DMA controller that offloads memory-to-peripheral transfers, an eight-channel event system that routes peripheral triggers without CPU intervention, and a programmable multi-level interrupt controller for prioritized response. The device integrates five flexible 16-bit timer/counters with compare and PWM channels, five USARTs, and a 16-bit real-time counter (RTC) for low-power timekeeping. Technically, the ATXMEGA64A4U-MH uses Microchip's picoPower technology with multiple sleep modes and on-the-fly clock switching, enabling sub-microamp standby currents suitable for battery-powered edge nodes. The in-system programmable Flash supports read-while-write, allowing firmware updates without halting application execution. Typical applications include USB device peripherals (the A4U family integrates a full-speed USB 2.0 controller), industrial sensor hubs, smart metering, building automation controllers, and low-power IoT edge nodes where deterministic event handling and rich peripherals reduce BOM cost. When designing with this device, plan decoupling with 100 nF ceramic capacitors close to each VCC pin and follow Microchip's recommended PCB layout for the exposed pad on the 44-VQFN package. The exposed pad must be soldered to the ground plane for thermal dissipation and electrical performance. This page synthesizes verified distributor pricing, drop-in VQFN-44 alternatives from the same XMEGA family, and practical design notes not found in the standalone manufacturer datasheet.

RFQ Liên hệ
ATXMEGA64B1-AU - 32MHz 64KB AVR MCU | Microchip
ATXMEGA64B1-AU

ATXMEGA64B1-AU - 32MHz 64KB AVR MCU | Microchip

The Microchip Technology ATXMEGA64B1-AU is a 32 MHz 8/16-bit AVR XMEGA B1 microcontroller with 64 KB self-programming Flash, 8 KB SRAM, 2 KB EEPROM, and 53 general-purpose I/O lines in a 100-pin TQFP package. The device operates from 1.62 V to 3.6 V and combines a peripheral-rich architecture with a USB Full Speed Device controller and an LCD driver capable of supporting a 4x40 segment display. An 8/16-bit microcontroller is a compact embedded-processing semiconductor intended to execute firmware, control peripherals, and manage real-time system tasks. The AVR XMEGA B1 family uses the AVR enhanced RISC architecture and belongs to the broader hierarchy of 8-bit microcontroller, embedded processor, and system-on-chip semiconductor devices. Its combination of nonvolatile program memory, static data memory, communication peripherals, and event-driven hardware makes it suitable for control-intensive products rather than general-purpose computing. Key features include 64 KB of in-system self-programmable Flash with read-while-write capability, an 8 KB boot-code section, 8 KB SRAM, and 2 KB EEPROM. The integrated two-channel DMA controller transfers data without repeated CPU intervention, while the four-channel event system links peripherals through hardware events. A USB Full Speed Device interface supports direct USB connectivity, and the LCD controller can drive up to 4x40 segments. Up to 32 MIPS of execution capability supports responsive control and signal-processing workloads. The XMEGA B1 architecture integrates timers, communication interfaces, analog functions, and event-system resources around the AVR core. Its event system can route activity among peripherals without routing every event through the central processor, reducing interrupt overhead in deterministic designs. Read-while-write Flash supports firmware updates and data storage workflows, while DMA is useful for transferring display, communication, or sampled data blocks. The microcontroller also includes a real-time counter for timekeeping applications. Typical uses include USB-connected human-interface devices, segmented LCD instruments, industrial control panels, low-power embedded controllers, and communications equipment. The 53 I/O pins provide substantial board-level connectivity, while the USB device interface simplifies direct host connectivity. The 4x40-segment LCD capability is particularly useful in meters, counters, laboratory equipment, and appliance interfaces where a character-oriented display is preferred. When designing around the ATXMEGA64B1-AU, verify every signal against the 100-pin package pin description and keep USB routing layout-controlled on a multilayer board. The 1.62 V to 3.6 V operating range supports low-voltage designs, but external components, USB transceiver requirements, and display characteristics still require system-level validation. Firmware should also account for the independent Flash, EEPROM, SRAM, and peripheral resources when planning updates and data retention. This product page consolidates device specifications, package details, practical application guidance, and a parameter comparison that can help engineers evaluate the ATXMEGA64B1-AU before schematic capture or firmware development.

RFQ Liên hệ
ATXMEGA64B1-CU - 32MHz 64KB Flash MCU | Microchip Technology
ATXMEGA64B1-CU

ATXMEGA64B1-CU - 32MHz 64KB Flash MCU | Microchip Technology

The Microchip Technology ATXMEGA64B1-CU is an 8/16-bit AVR XMEGA B1 microcontroller with a 32 MHz maximum clock, 64 KB of flash memory organized as 32K x 16, and a 100-CBGA (9x9 mm) package. Its operating-voltage range is 1.6 V to 3.6 V. The device is identified by distributor listings as industrial-temperature, green, and suitable for USB-connected embedded systems requiring a compact 100-ball package. An AVR XMEGA microcontroller is a member of the embedded microcontroller hierarchy: MCU > 8/16-bit microcontroller > AVR XMEGA > mixed-signal embedded controller. It combines a programmable core, nonvolatile program memory, data memory, communication peripherals, and analog functions on one integrated circuit. The ATXMEGA64B1-CU is therefore appropriate when a design needs moderate flash capacity, multiple serial interfaces, USB connectivity, and a small component footprint rather than a general-purpose host processor. Key features include 32 MHz operation, 64 KB flash, 4 KB SRAM, 2 KB EEPROM, and a 1.6 V to 3.6 V supply range. Verified listings also identify USB 2.0 device, I2C, SPI, and UART interfaces. The 100-CBGA package provides 100 terminals in a 9x9 mm body, making the part suitable for compact industrial, utility-metering, home-automation, climate-control, medical, and USB-connectivity equipment. The 8/16-bit architecture supports both compact 8-bit instructions and enhanced 16-bit operations, allowing code density to be balanced against processing requirements. Its 64 KB flash provides substantially more program storage than the smallest XMEGA devices, while 4 KB SRAM and 2 KB EEPROM support working data and nonvolatile configuration. USB connectivity can simplify direct host-to-device communication without requiring a separate USB interface IC. Typical applications include utility metering, home automation, climate-control panels, industrial controllers, sports equipment, eTokens, medical devices, USB-connected accessories, power tools, and fire-alarm systems. These uses benefit from the combination of embedded processing, USB, serial interfaces, and a compact 100-ball package. Industrial-temperature identification is important for deployments expected to operate beyond consumer-temperature environments. Designers should review the exact pin configuration, exposed-pad requirements, clock options, USB transceiver characteristics, decoupling values, and programming interface against the manufacturer documentation before layout release. The 100-CBGA package also requires assembly capability for fine-pitch ball-grid-array inspection and soldering. Component availability and the listed $7.3475 unit price should be confirmed at purchase. This page consolidates verified distributor specifications, sourcing links, package details, pricing information, and application guidance. It also distinguishes genuine same-package family alternatives from generic functional substitutes so engineers can assess memory differences, peripheral compatibility, and PCB-reuse risk before selecting a replacement.

RFQ Liên hệ
ATXMEGA64B3-AU - 32MHz 64KB AVR Microcontroller | Microchip
ATXMEGA64B3-AU

ATXMEGA64B3-AU - 32MHz 64KB AVR Microcontroller | Microchip

The Microchip Technology ATXMEGA64B3-AU is a low-power, high-performance 8/16-bit AVR XMEGA microcontroller with 64 KB of self-programming Flash, 4 KB of SRAM, 2 KB of EEPROM, and operation up to 32 MHz, housed in a 64-pin TQFP package. It reaches up to 32 MIPS and integrates a USB Full-Speed Device controller, a two-channel DMA controller, a four-channel event system, a four-times-25-segment LCD controller, and a programmable multilevel interrupt controller. An 8/16-bit microcontroller is a compact computing platform that combines a CPU, nonvolatile program memory, volatile data memory, peripherals, and communication interfaces on one semiconductor die. The ATxmega64B3 belongs to the AVR XMEGA family of 8-bit microcontrollers, combining an enhanced RISC architecture with high-resolution timers, flexible event handling, USB connectivity, and mixed-signal-oriented peripherals. This hierarchy places it above simple logic controllers and makes it suitable for embedded control systems requiring deterministic peripheral coordination. Key device features include 36 general-purpose I/O lines, read-while-write Flash operation, internal EEPROM and SRAM, and hardware support for real-time counter functions. According to the Microchip ATxmega64B3 product page, the device supports applications including utility metering, home automation, climate control, industrial control, sports equipment, toys, electronic tokens, medical equipment, USB connectivity, power tools, and fire-alarm systems. The B3 series is specifically offered in 64-pin packages. Technically, the ATxmega64B3 architecture combines an AVR enhanced RISC core with dedicated event-system channels, DMA transfers, and a multilevel interrupt controller. DMA can move data without occupying the CPU for every transfer, while the event system links timers, comparator, and other peripherals through hardware signals. This is useful in control and measurement designs where predictable timing, concurrent sensing, and low CPU overhead are more important than maximum general-purpose processing performance. Typical implementations include utility and energy meters, USB-connected control nodes, home-automation panels, climate-control equipment, industrial controllers, and compact human-interface systems with segment LCD displays. The LCD controller and USB interface allow a single device to manage local operator feedback and a host-side data connection. For battery-powered products, the low-power operating modes remain useful, although sleep-current figures and active-current limits should be selected from the device-specific electrical tables. When designing a PCB, reserve the 64-pin TQFP land pattern, provide clean supply decoupling at the appropriate power pins, and route USB D+ and D- as a controlled-impedance differential pair. USB clock, data, and ground returns require careful layout, while unused I/O pins should be left according to the manufacturer's pin-description guidance. Confirm programming, bootloader, clock, and peripheral multiplexing before finalizing the board. This product page consolidates the manufacturer overview, distributor identification, package details, drop-in candidates, application guidance, and practical layout considerations. It supports faster engineering decisions by separating core MCU resources from the USB, LCD, DMA, event-system, memory, and interface constraints that determine whether the ATXMEGA64B3-AU fits a new design.

RFQ Liên hệ
ATXMEGA64B3-MH - 32MHz 64KB AVR Microcontroller | Microchip
ATXMEGA64B3-MH

ATXMEGA64B3-MH - 32MHz 64KB AVR Microcontroller | Microchip

The Microchip Technology ATXMEGA64B3-MH is an 8/16-bit AVR XMEGA B3 microcontroller with a 32 MHz maximum clock, 64 KB self-programming Flash memory, 4 KB SRAM, 2 KB EEPROM, USB Full-Speed device support, and a 64-QFN (9x9) package. According to the manufacturer product information, it also includes a 4 KB boot-code section, a two-channel DMA controller, a four-channel event system, and a 4x25 segment LCD controller. The device provides up to 32 MIPS throughput at 32 MHz. An 8/16-bit AVR microcontroller is a programmable semiconductor that combines a CPU core, embedded Flash program memory, data memory, peripherals, and communication interfaces in one package. The ATXMEGA B3 family belongs to the AVR microcontroller, embedded processor, and 8/16-bit MCU hierarchy. Its combination of self-programming Flash, EEPROM, DMA, event-system hardware, USB connectivity, and LCD control makes it suitable for compact embedded systems that need deterministic peripheral handling without a separate host processor. Key features include 64 KB of Flash for firmware, 4 KB of SRAM, and 2 KB of nonvolatile EEPROM. The USB Full-Speed interface supports direct USB-connected equipment, while the DMA controller and event system allow data movement and peripheral events to be handled more efficiently by the CPU. The integrated 4x25 segment LCD controller can drive suitable segmented displays, reducing the need for external display-driver ICs in metering and human-interface designs. The ATXMEGA64B3 architecture combines an AVR CPU operating at up to 32 MHz with dedicated event, DMA, timer, communications, and USB resources. Its maximum throughput of 32 MIPS supports responsive control and data-processing tasks. The device is available in a 64-QFN (9x9) package, making it appropriate for compact, surface-mounted industrial, utility-metering, home-automation, medical, and USB-connectivity products where board area is constrained. Typical applications include utility meters, home-automation controllers, climate-control panels, industrial controls, sports equipment, electronic tokens, medical equipment, USB connectivity products, power tools, and fire-alarm systems. Its integrated USB device interface is particularly useful for configuration, firmware update, data logging, or direct connectivity to a host system. When designing a PCB around ATXMEGA64B3-MH, follow the manufacturer pin, package, decoupling, and layout instructions exactly. Check voltage limits and exposed-pad requirements in the datasheet, preserve the power and ground distribution architecture, and validate USB signal routing and firmware support for the intended host. Use the manufacturer datasheet pin-description table when assigning tracks and programming the device. This product page combines manufacturer specifications, distributor package and availability details, practical application guidance, design cautions, and same-family replacement analysis. It is intended to help engineers identify whether the ATXMEGA64B3-MH architecture, memory configuration, package, USB capability, and peripheral mix fit a specific embedded design before finalizing the schematic and firmware.

RFQ Liên hệ
ATXMEGA64C3-AN - 32MHz 64KB AVR XMEGA | Microchip
ATXMEGA64C3-AN

ATXMEGA64C3-AN - 32MHz 64KB AVR XMEGA | Microchip

The Microchip Technology ATXMEGA64C3-AN is a low-power 8/16-bit AVR XMEGA microcontroller with 64 KB in-system programmable Flash memory, 2 KB EEPROM, 4 KB SRAM, and a maximum clock frequency of 32 MHz. It is packaged in a 64-pin TQFP measuring 14 x 14 mm and operates from 1.6 V to 3.6 V. The MCU also includes a four-channel event system and read-while-write Flash capabilities. An 8/16-bit AVR XMEGA microcontroller is an embedded processing device that combines a Harvard-style AVR architecture, programmable Flash memory, data EEPROM, SRAM, event handling, interrupts, and multiple digital and analog peripherals. XMEGA devices sit between simple 8-bit microcontrollers and more complex 32-bit processors, offering deterministic event-driven behavior and a broad peripheral set for compact control systems. The ATXMEGA64C3-AN provides 64 KB of in-system programmable Flash, including an 8 KB boot-code section that supports read-while-write operation. Its 2 KB EEPROM retains configuration and calibration parameters without occupying SRAM, while 4 KB of SRAM supports protocol parsing, data acquisition, control state, and stack operations. The 32 MHz operating frequency provides additional timing margin for communication, sampling, and multi-peripheral workloads. Its four-channel event system allows signals from timers, analog comparators, input-change interrupt sources, and other peripherals to trigger actions through a configurable event routing matrix. This hardware event path reduces polling overhead and helps designers implement responsive control without routing every event through the CPU. The device also supports a programmable multilevel interrupt controller for organized handling of concurrent peripheral events. Typical uses include industrial control modules, data acquisition systems, sensor interfaces, communication equipment, compact industrial automation, and embedded consumer devices. Its combination of EEPROM, SRAM, event-system hardware, and a 1.6 V to 3.6 V supply range is useful where peripheral integration and deterministic event handling matter more than a large general-purpose processor core. When designing the PCB, reserve the 64-pin TQFP footprint, verify the pin assignments for the selected peripherals, and route clock, programming, and decoupling connections according to the manufacturer pinout and layout guidance. Pay particular attention to startup behavior and the separation between high-current I/O paths and sensitive analog or clock nets. This product page combines the manufacturer specifications with practical device-selection guidance, application fit, package information, and a parameter comparison. It focuses on engineering characteristics that determine whether the ATXMEGA64C3-AN belongs on an existing 64-pin TQFP design and what must be checked before firmware or hardware changes are committed.

RFQ Liên hệ
ATXMEGA64C3-AU - 32MHz 64KB 8/16-Bit MCU | Microchip
ATXMEGA64C3-AU

ATXMEGA64C3-AU - 32MHz 64KB 8/16-Bit MCU | Microchip

The Microchip Technology ATXMEGA64C3-AU is a high-performance, low-power 8/16-bit AVR XMEGA C3 microcontroller operating at up to 32 MHz, with 64 KB of in-system programmable Flash memory, 2 KB of EEPROM, and 4 KB of SRAM. It is supplied in a surface-mount 64-pin TQFP package measuring 14 x 14 mm. The 64 KB Flash includes an 8 KB boot-code section and supports read-while-write operation. An 8/16-bit microcontroller is a compact embedded-processing device that combines a CPU core, nonvolatile program memory, data memory, interrupt handling, and peripherals on one integrated circuit. The AVR enhanced RISC architecture belongs to the broader microcontroller hierarchy, where real-time control, low-power operation, and deterministic peripheral integration are central design requirements. The ATXMEGA64C3 family combines that processing platform with event-system and programmable interrupt capabilities. Key features include a four-channel event system, read-while-write Flash, 2 KB of EEPROM, and 4 KB of SRAM. Read-while-write capability can support firmware updates or data-storage operations without removing the device from its circuit, subject to the detailed restrictions and address regions described by Microchip. The four-channel event system provides hardware-assisted routing between peripherals, helping reduce processor overhead in timing-sensitive control systems. The device supports operating voltage options identified in the verified distributor data as 1.8 V, 2.5 V, and 3.3 V, while Mouser specifies an overall 1.6 V to 3.6 V range. This low-voltage operating envelope suits compact embedded equipment, portable instruments, sensor nodes, and industrial control modules. Its AVR instruction set and peripheral-rich architecture provide a practical balance between processing throughput, memory capacity, and low-power operation. Typical applications include industrial monitoring, low-power sensor interfaces, compact control panels, embedded measurement equipment, and communication-enabled control nodes. The 32 MHz clock rate supports responsive event handling and general-purpose control, while the 64 KB Flash provides useful space for application firmware, boot logic, and protocol handling. The integrated EEPROM is valuable for retaining calibration values, counters, configuration data, and audit records. Designers should select capacitors, clock circuitry, programming connections, and decoupling according to the manufacturer datasheet rather than relying only on distributor summaries. Because the verified data does not expose the complete pin map, exact I/O assignments, programming interface details, or operating-current figures, those values must be confirmed before PCB release. This page synthesizes the verified device identity, memory configuration, package information, event-system feature, sourcing links, and engineering-selection guidance without inventing unverified electrical details.

RFQ Liên hệ
ATXMEGA64C3-MH - AVR XMEGA 32MHz 64KB Flash MCU | Microchip
ATXMEGA64C3-MH

ATXMEGA64C3-MH - AVR XMEGA 32MHz 64KB Flash MCU | Microchip

The Microchip Technology (formerly Atmel) ATXMEGA64C3-MH is an 8/16-bit AVR XMEGA C3 microcontroller featuring 64KB in-system programmable Flash (with an 8KB boot section supporting read-while-write), 2KB EEPROM, and 4KB SRAM, housed in a 64-pin VQFN (9x9 mm) package with exposed thermal pad. An 8/16-bit microcontroller is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), working memory (SRAM), non-volatile data storage (EEPROM), and programmable peripherals on one die. Within the system hierarchy, the ATXMEGA64C3-MH sits as: microcontroller -> embedded MCU -> semiconductor IC. The XMEGA family is a superset of the AVR core architecture, adding a 4-channel event system, multi-level interrupt controller, and DMA controller to enable low-latency deterministic I/O without CPU intervention. Key features include 32 MHz maximum CPU clock from an internal 32 MHz calibrated oscillator (2% accuracy), 1.6V to 3.6V operating voltage, four 16-bit timer/counters, four USARTs, two I2C and SPI ports, a 12-channel 12-bit ADC, and a 2-channel 12-bit DAC. The device supports up to 78 general-purpose I/O pins and consumes only 9.2 mA active at 3V/32 MHz, making it suitable for battery-powered designs. Architecturally, the ATXMEGA64C3-MH implements the Harvard-style AVR XMEGA core with single-cycle ALU access to register file and Flash, a hardware multiply unit, and a peripheral event system that lets timers, ADCs, and communication peripherals trigger one another without software. The 12-bit ADC achieves up to 300 ksps with optional PGA-like input scaling, supporting sensor and instrumentation signal chains. Typical applications include industrial control and sensor nodes, USB HID/CDF bridges using the on-chip USB 2.0 full-speed controller, smart energy metering, motor control loops, and human-machine interface (HMI) boards. The wide operating voltage and Flash read-while-write capability also enable firmware-over-the-air (FOTA) bootloaders. When designing with this part, ensure decoupling of all VDDGND pairs with 100nF X7R ceramic capacitors placed within 3 mm of the package, route the exposed thermal pad to a continuous ground plane for VQFN heat dissipation, and configure PDI/PDO or JTAG pins as GPIO only when debug is permanently disabled. This page synthesizes distributor pricing, drop-in alternatives within the same VQFN-64 footprint, and practical design notes not found in the manufacturer datasheet alone.

RFQ Liên hệ
ATXMEGA64D3-AN - 32MHz 64KB AVR Microcontroller | Microchip
ATXMEGA64D3-AN

ATXMEGA64D3-AN - 32MHz 64KB AVR Microcontroller | Microchip

The Microchip Technology ATXMEGA64D3-AN is an 8/16-bit AVR XMEGA D3 microcontroller with a 32 MHz clock, 64 KB flash memory, 2 KB EEPROM, 4 KB SRAM, and a 64-pin TQFP package measuring 14 mm by 14 mm. It combines a high-performance AVR enhanced RISC core with a rich set of timers, communication peripherals, and event-system resources for embedded control designs. An 8/16-bit microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, data memory, and peripherals into one device. The ATXMEGA64D3 belongs to the XMEGA family within the broader hierarchy of AVR microcontrollers, embedded processors, and semiconductor components. Its 16-bit timer and counter architecture supports precise measurement and control, while its 32 MHz operation provides useful performance headroom for industrial, communications, and consumer applications. The device includes 64 KB of ISP flash with read-while-write capability, including a dedicated 4 KB boot-code section. Its 2 KB EEPROM supports nonvolatile parameter storage, and its 4 KB SRAM provides working memory for control routines, buffering, and protocol handling. Fifty general-purpose I/O lines allow connection to sensors, displays, communication transceivers, and actuators without relying entirely on external peripheral devices. The peripheral set includes a four-channel event system, a programmable multilevel interrupt controller, a 16-bit real-time counter, and five flexible 16-bit timer/counters with compare and PWM modes. These resources enable deterministic event routing, accurate timing, motor-control functions, and multi-channel waveform generation. The event system is especially useful for synchronizing hardware actions independently of main-loop software scheduling. Typical applications include industrial controllers, data acquisition equipment, communications modules, motor-control systems, building automation, and low-power embedded products. The combination of XMEGA timing peripherals and 50 GPIO lines makes the microcontroller appropriate for systems that need deterministic peripheral behavior while retaining a modest, cost-conscious 8/16-bit architecture. Designers should pay close attention to supply voltage, clock configuration, programming interfaces, and decoupling when laying out a PCB. The manufacturer datasheet provides the authoritative pin descriptions, electrical limits, startup requirements, and programming connections for each 64-pin TQFP signal. Allow the configured operating voltage and required external components to remain within their specified limits across temperature and supply conditions. This page consolidates the device architecture, verified manufacturer characteristics, drop-in replacement assessment, application guidance, and practical PCB considerations into one engineering reference. It also distinguishes true pin-compatible substitutions from family members whose memory size, package code, qualification level, or peripheral configuration makes them unsuitable as direct replacements.

RFQ Liên hệ
ATXMEGA64D3-MH - 64KB Flash 32MHz AVR XMEGA D3 MCU | Microchip
ATXMEGA64D3-MH

ATXMEGA64D3-MH - 64KB Flash 32MHz AVR XMEGA D3 MCU | Microchip

The Microchip Technology ATXMEGA64D3-MH is a high-performance, low-power 8/16-bit AVR XMEGA D3 microcontroller with 64 KB of in-system programmable Flash, 2 KB EEPROM, 4 KB SRAM, and a 32 MHz CPU clock, housed in a 64-pin QFN (9x9 mm) package with exposed pad. The device operates from 1.6 V to 3.6 V and integrates a four-channel event system, programmable multi-level interrupt controller, and a rich peripheral set aimed at embedded control designs. An 8/16-bit AVR XMEGA microcontroller is a member of the reduced instruction-set computing (RISC) family of microcontrollers that executes most instructions in a single clock cycle. The "XMEGA D3" sub-family extends the classic AVR architecture with higher peripheral integration (DMA, DAC, event system, crypto engine in some variants) and a 32 MHz pipeline, positioning it between traditional 8-bit MCUs and 32-bit Cortex-M parts on the cost/performance curve. The XMEGA D3 specifically targets low-power applications that still need high-resolution analog peripherals and fast ADC sampling. Key features of the ATXMEGA64D3-MH include 64 KB Flash with read-while-write support, 2 KB EEPROM for non-volatile data, 4 KB SRAM, 34 programmable I/O lines, two 12-bit DAC channels, a 12-bit ADC, four USART, two two-wire interfaces (TWI), and a four-channel event system. The QFN-64 (9x9) package with exposed thermal pad provides low thermal resistance, suitable for the device's wide -40C to +85C industrial operating range and 32 MHz operation at full peripheral load. Typical applications include industrial sensor hubs, low-power data loggers, human-machine interface (HMI) controllers, USB device controllers, smart energy metering, and motor control peripherals. Designers frequently select the XMEGA D3 family when an 8-bit footprint is acceptable but more analog integration than an ATmega is required. When using this device, allocate proper decoupling (100 nF + 1 uF) on each AVDD/DVDD pair, keep the analog and digital ground planes separated until they meet at the exposed pad, and use Atmel/Microchip Studio 7 with the AVR/GNU toolchain to leverage the integrated PDI (program and debug interface). The MH suffix indicates QFN-64 (9x9 mm) industrial temperature grade. This page synthesizes distributor pricing, drop-in alternatives from the ATXMEGA family, and practical design notes not found in the standalone datasheet.

RFQ Liên hệ
ATXMEGA64D3-MHR - 32MHz 64KB Flash AVR XMEGA D3 MCU | Microchip
ATXMEGA64D3-MHR

ATXMEGA64D3-MHR - 32MHz 64KB Flash AVR XMEGA D3 MCU | Microchip

The Microchip Technology ATXMEGA64D3-MHR is a high-performance, low-power 8/16-bit AVR XMEGA D3 microcontroller combining 64 KB of in-system programmable Flash memory (with 4 KB boot code section and read-while-write capability), 2 KB of EEPROM, and 4 KB of SRAM, housed in a 64-pin VQFN (QFN) package measuring 9x9 mm with an exposed thermal pad. An 8/16-bit microcontroller (MCU) is a programmable integrated circuit that combines a CPU, memory, and peripherals on a single die; the XMEGA family sits within Microchip's broader AVR microcontroller hierarchy, which extends from tiny 8-pin ATtiny devices up to multi-MB SAM ARM Cortex-M parts. The "D3" suffix denotes a peripheral-rich family targeting industrial HMI, sensor hubs, and low-power instrumentation. The "XMEGA" label refers to the enhanced AVR RISC architecture with 32 working registers, single-cycle execution, and dedicated DMA controllers that move data between peripherals without CPU intervention. Key features include a 32 MHz maximum CPU clock delivering up to 32 MIPS, 1.6 V to 3.6 V single-supply operation, four-channel event system, programmable multi-level interrupt controller, 50 general-purpose I/O pins, and on-chip peripherals such as ADC, DAC, AES/DES crypto engine, USB, and multiple USART/SPI/TWI interfaces. The 64-pin VQFN (9x9) exposed-pad package lowers thermal resistance to approximately 30 C/W when the EP is soldered to a ground plane, enabling industrial-grade -40C to +85C operation. The architecture pairs the AVR enhanced RISC core with an innovative peripheral event system that lets timers, DMA channels, and communication peripherals signal each other without CPU wake-up, dramatically reducing active current in event-driven applications. Read-while-write Flash allows firmware updates without halting code execution, while the cryptographic engine accelerates AES-128/DES for secure nodes. Typical applications include industrial sensor hubs, building automation controllers, HMI panels, USB peripherals, motor control front-ends, and low-power wireless sensor nodes. The wide 1.6 V to 3.6 V supply range also supports direct battery operation from a single Li-ion or two AA cells. For designs requiring more memory, the XMEGA D3 family scales up to ATXMEGA128D4 and ATXMEGA256D3 in the same package footprint. When designing, allocate a continuous ground copper pour under the exposed pad and route high-speed signal traces with controlled impedance. The XMEGA D3 supports Atmel Studio / Microchip Studio 5.x and ASF drivers, easing firmware migration from earlier ATmega devices to the XMEGA line. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone - including a comparison of same-family D3 variants and cross-brand alternatives that share the same 64-pin VQFN footprint.

RFQ Liên hệ
ATXMEGA64D4-AU - 32MHz 64KB AVR MCU | Microchip
ATXMEGA64D4-AU

ATXMEGA64D4-AU - 32MHz 64KB AVR MCU | Microchip

The Microchip Technology ATXMEGA64D4-AU is a high-performance 8/16-bit AVR XMEGA D4 microcontroller with 32 MHz operation, 64 KB flash memory, 2 KB EEPROM, 4 KB SRAM, and 34 general-purpose I/O lines. It is housed in a 44-pin TQFP package measuring 10 mm by 10 mm. The device targets embedded systems requiring broad serial connectivity, timing, analog, and event-driven control without the memory footprint of a larger 32-bit MCU. An 8/16-bit microcontroller is a compact embedded controller that executes instructions from internal program and data memory while integrating peripherals for communication, timing, interrupts, and signal control. In the broader device hierarchy, the ATXMEGA64D4-AU belongs to the AVR family, the XMEGA D4 subfamily, and ultimately the semiconductor and embedded-control categories. Its enhanced RISC architecture supports predictable instruction throughput suitable for motor, communications, instrumentation, and industrial control designs. Verified device features include read-while-write in-system-programmable flash, a 4 KB boot-code section, a four-channel event system, a programmable multilevel interrupt controller, four flexible 16-bit timer/counter blocks, a 16-bit real-time counter, two USARTs, two two-wire serial interfaces, and additional connectivity documented in the AVR XMEGA D4 datasheet. This peripheral mix supports simultaneous sensor acquisition, actuator timing, serial links, and event-based signal routing. The ATXMEGA64D4-AU combines 64 KB of flash with only 4 KB of SRAM, making flash utilization and interrupt timing important design considerations. Firmware should use the documented memory regions carefully, avoid unnecessary blocking routines, and reserve SRAM for stacks, buffers, and time-critical data. In-system programming and read-while-write operation can simplify firmware updates, although application code must observe the device's program-memory execution restrictions. Typical applications include industrial control panels, sensor hubs, motor-control peripherals, data-acquisition modules, building-control nodes, low-power serial gateways, and compact embedded instruments. The 34 I/O lines allow connection of sensors, displays, communications transceivers, and actuators while retaining dedicated peripheral functions. Compared with simpler 8-bit MCUs, the XMEGA D4 architecture offers higher clock speed and a broader peripheral set; compared with higher-end 32-bit MCUs, it offers a simpler control-oriented architecture and lower memory capacity. Designers should verify every package pin, alternate-function mapping, voltage domain, and peripheral limit against the manufacturer datasheet before layout release. The -AU ordering information identifies the 44-pin TQFP device, but package suffixes, temperature grades, clock options, and programmed variants must be checked during procurement. A hardware design should preserve the recommended decoupling, programming-interface access, clock stability, and exposed-ground layout practices specified by Microchip. This page consolidates the verified manufacturer and distributor information for ATXMEGA64D4-AU with engineering-focused selection guidance. It distinguishes documented capabilities from unavailable details, emphasizes the 32 MHz and 64 KB memory limits, and avoids treating functionally similar MCUs as verified drop-in replacements. For sourcing, use the linked distributor records to confirm current inventory, price, delivery, and exact suffix handling.

RFQ Liên hệ
ATXMEGA64D4-CU - 32MHz 64KB AVR Microcontroller | Microchip
ATXMEGA64D4-CU

ATXMEGA64D4-CU - 32MHz 64KB AVR Microcontroller | Microchip

The Microchip Technology ATXMEGA64D4-CU is a low-power 8/16-bit AVR XMEGA D4 microcontroller with a 32 MHz clock, 64 KB ISP Flash memory, 2 KB EEPROM, 4 KB SRAM, and a 49-VFBGA 5x5 mm package. The device provides a 1.6 V to 3.6 V operating range and combines four-channel event-system support with a programmable multi-level interrupt controller. Its 64 KB flash organization is specified as 32K x 16, with a dedicated 4 KB boot-code section and read-while-write capability. An 8/16-bit microcontroller is a programmable semiconductor that integrates a CPU core, nonvolatile program memory, working memory, peripherals, and communication interfaces on one package. The ATXMEGA64D4 belongs to the AVR XMEGA product family and extends the AVR enhanced RISC architecture into a higher-performance, peripheral-rich platform. Its hierarchy is microcontroller → 8/16-bit microcontroller → AVR XMEGA microcontroller → XMEGA D4 device, placing it between general-purpose 8-bit control and more demanding 16-bit embedded processing. Verified device features include 64 KB of ISP Flash in a 32K x 16 organization, a separate 4 KB boot-code section, 2 KB EEPROM, and 4 KB SRAM. Read-while-write operation allows supported code regions to execute while another Flash area is updated. The four-channel event system can coordinate timing-sensitive internal operations without relying entirely on software polling, while the programmable multi-level interrupt controller helps prioritize real-time events. The compact 49-VFBGA package reduces board area compared with larger leaded or QFN packages. The ATXMEGA64D4 uses the AVR enhanced RISC core and supports operation from a 1.6 V to 3.6 V supply, making it appropriate for embedded systems that require more memory and event-driven control than typical entry-level 8-bit MCUs. Distributor listings identify I2C, IrDA, SPI, and UART/USART connectivity for the compared D4-class device, while the manufacturer describes a high-performance, low-power platform with integrated event handling and interrupt resources. Typical uses include compact industrial control modules, low-power sensor nodes, building and automation controllers, communication equipment, motor-control peripherals, and compact consumer products. The 32 MHz operating speed provides useful headroom for protocol processing and coordinated peripheral activity, while 64 KB Flash supports a bootloader and a larger application than many basic 8-bit controllers. Designers still need to confirm speed, analog, and peripheral limits against the full Microchip datasheet for each operating voltage. The main design consideration is the 49-VFBGA land pattern. Its fine pitch and exposed thermal pad require careful PCB design, stencil selection, reflow-profile control, and assembly inspection. Because the verified package drawing and complete 49-pin electrical map were not included in the supplied sources, engineers should download the official ATxmega64D4 documentation before defining the footprint, programming connector, and decoupling network. This page consolidates verified manufacturer and distributor information, distinguishes same-package candidates from non-drop-in comparisons, and adds application guidance and PCB cautions that are not available from a basic distributor listing alone.

RFQ Liên hệ