積體電路

子分類

📁 ADC/DAC 3,100+ 產品 📁 放大器 IC 1,900+ 產品 📁 音訊編解碼器 18 產品 📁 音訊 IC 2 產品 📁 時脈與計時 660+ 產品 📁 Comparator ICs 1 產品 📁 DSP 1,100+ 產品 📁 資料擷取 IC 2 產品 📁 數位電位器 4 產品 📁 顯示驅動器與控制器 1 產品 📁 FPGA 與 CPLD 7,300+ 產品 📁 介面 IC 3,300+ 產品 📁 LED 驅動器 1 產品 📁 邏輯 IC 460+ 產品 📁 記憶體 IC 870+ 產品 📁 微控制器 20,000+ 產品 📁 微處理器 4 產品 📁 馬達驅動器 1 產品 📁 其他 1 產品 📁 感測器與偵測器介面 1 產品 📁 特殊用途 IC 15 產品 📁 視訊 IC 14 產品

產品（39,000+)

PIC16LF722-I/ML - 8-bit 20MHz XLP MCU 3.5KB Flash | Microchip
PIC16LF722-I/ML

PIC16LF722-I/ML - 8-bit 20MHz XLP MCU 3.5KB Flash | Microchip

The Microchip Technology PIC16LF722-I/ML is an 8-bit PIC® microcontroller based on the mid-range enhanced RISC architecture, featuring 3.5KB (2K x 14) of Flash program memory and operating at speeds up to 20MHz. It is housed in a 28-pin QFN (6x6 mm) package with an exposed thermal pad and belongs to the PIC16LF7xx family, designed around the nanoWatt XLP™ (eXtreme Low Power) technology platform for battery-friendly applications. The device supports a wide 1.8V to 3.6V operating voltage range targeting low-voltage systems such as single-cell Li-Ion or 2xAA powered products. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash, RAM, EEPROM), peripherals, and I/O on one silicon die. PIC microcontrollers use a Harvard architecture featuring separate program and data buses plus a RISC instruction set, which simplifies decoding and improves throughput per MHz. The PIC16LF722 sits in the lower-density end of the PIC16 mid-range family, optimized for applications that need small footprint, low power, and modest analog/mixed-signal integration without the cost of larger 14-bit or 16-bit cores. Key specifications of the PIC16LF722-I/ML include 128 bytes of RAM, 256 bytes of EEPROM, 25 GPIO, multiple timers (Timer0, Timer1, Timer2), a 12-bit A/D converter with up to 11 channels, two 8-bit timers plus one 16-bit timer, an Enhanced USART, and dual analog comparators. The XLP technology enables sleep currents down to the nanoamp range and wake-up from interrupts on pin change, qualifying the device for energy-harvesting and always-on sensor applications. Architecture-wise, the PIC16LF722 uses Microchip's standard mid-range core with a 14-bit instruction word and a single accumulator W register plus file-based RAM. The instruction pipeline runs at one instruction per two clock cycles at full speed, and the device includes an internal 16 MHz oscillator that can be trimmed via OSCTUNE for improved frequency accuracy. The 12-bit ADC is successive-approximation with selectable reference sources, and the comparators can be routed to timer capture inputs for advanced timing. Typical applications include handheld battery-powered instruments, low-power wireless sensor nodes, remote controls, IoT edge nodes, white-goods user-interface controllers, and small motor/lighting controllers. The wide operating voltage and rich peripheral mix allow system designers to consolidate multiple functions on a single IC, reducing BOM cost and PCB area. When designing with the PIC16LF722-I/ML, place the 28-QFN exposed pad on a continuous ground copper pour to dissipate the small amount of internal heat. Use low-ESR decoupling (100 nF + 10 µF) close to VDD, and keep the MCLR pull-up network compact. For ultra-low-power designs, leverage the nanoWatt XLP sleep modes and disable unused peripherals via firmware. This page synthesizes distributor stock and pricing, drop-in compatible alternatives from the PIC16LF7xx family and cross-brand sources, and practical design notes not always present in the manufacturer datasheet itself.

詢價 聯絡我們
PIC16LF722-I/SO - 8-Bit 20MHz XLP MCU 3.5KB Flash | Microchip
PIC16LF722-I/SO

PIC16LF722-I/SO - 8-Bit 20MHz XLP MCU 3.5KB Flash | Microchip

The Microchip Technology PIC16LF722-I/SO is an 8-bit PIC16F-series flash microcontroller built on nanoWatt eXtreme Low Power (XLP) technology, delivering 20 MIPS performance at 20 MHz from a 3.5 KB (2K x 14) program Flash memory and 128 bytes of RAM in a 28-pin SOIC (7.50 mm) package. Operating from 1.8 V to 3.6 V with 25 I/O pins, the device integrates a 16-level hardware stack, internal 16 MHz oscillator, brown-out reset, power-on reset, watchdog timer, PWM, and capture/compare peripherals alongside I2C, SPI, and USART connectivity. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and configurable peripherals on one die. PIC16F-series devices occupy the mid-range position in Microchip's 8-bit portfolio between baseline PIC10/PIC12 parts and the enhanced PIC18 family, and they are widely deployed in ultra-low-power battery products, sensor interfaces, and human-interface subsystems. The LF prefix denotes the wide-Vdd, low-power silicon, while XLP technology cuts sleep current into the nanoamp range. Key differentiating features of the PIC16LF722 include 1.8 V to 3.6 V operation, a typical sleep current below 50 nA with RTC active, four 8-bit timer/counters, a 10-bit ADC up to 8 channels, a Master Synchronous Serial Port supporting SPI and I2C, and an Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART). The Harvard RISC architecture executes most instructions in one instruction cycle, giving 20 MIPS throughput at the 20 MHz oscillator. Typical applications span battery-powered IoT sensor nodes, low-end remote controls, white-goods user-interface boards, and consumer accessories that need a low-pin-count, low-Vdd MCU with on-chip Flash and a 28-SOIC footprint for hand-solderable prototypes. The wide supply range also makes the part useful as a co-processor for power-management or housekeeping tasks in larger embedded designs. When designing, route the ICSP clock and data lines (RB6/RA5 and RB7/RA4 by convention) to an in-circuit programming header for field upgrades, and keep the MCLR pull-up close to the device. The 28-SOIC package simplifies hand prototyping compared with QFP variants and is generally priced lower per unit at the 100-piece break.

詢價 聯絡我們
PIC16LF722-I/SP - 8-bit XLP MCU, 3.5KB Flash, 20MHz | Microchip
PIC16LF722-I/SP

PIC16LF722-I/SP - 8-bit XLP MCU, 3.5KB Flash, 20MHz | Microchip

The Microchip Technology PIC16LF722-I/SP is a low-power 8-bit PIC microcontroller from the PIC® XLP™ 16F family, featuring 3.5KB (2K x 14) of Flash program memory, 128 bytes of SRAM, and a 20 MHz maximum operating frequency in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. The part operates across a 1.8V to 3.6V wide supply range, integrates an 8-channel 8-bit ADC, and includes nanoWatt XLP extreme-low-power technology for battery-driven designs. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data path, an ALU, on-chip program and data memory, and a rich set of peripherals. PIC microcontrollers use a RISC-like Harvard architecture with separate program and data buses, which allows instruction fetch and data access to occur in the same cycle. The PIC16F family sits in the PIC16F -> PICmicro -> 8-bit MCU -> microcontroller -> embedded controller taxonomy and is widely used in cost-sensitive, low-power embedded systems. Key features of the PIC16LF722 include 25 digital I/O pins, one Enhanced Capture/Compare/PWM (ECCP) module plus one standard CCP, an 8-channel 8-bit ADC with internal voltage reference, two 8-bit timers plus one 16-bit timer, an enhanced USART, an MSSP (I2C/SPI) peripheral, and a wide-operating-range internal oscillator. nanoWatt XLP technology delivers sleep currents in the microamp range, with multiple low-power operating modes such as Sleep, Idle, and peripheral-selective gating. The device integrates a precision internal 16 MHz oscillator, 256 bytes of EEPROM data memory, and in-circuit serial programming (ICSP) via two pins. An on-chip 1.024V ±1% voltage reference (FVR) supports the ADC and comparators, eliminating the need for an external reference in many applications. The -I temperature grade supports -40°C to +85°C industrial operation. Typical applications include battery-powered sensor nodes, low-power remote controls, smoke and CO detectors, electronic shelf labels, smart thermostats, and any portable or energy-harvesting product where Sleep-mode current and integrated analog drive BOM savings. The 28-pin SPDIP package supports hand-prototyping and breadboard-friendly designs common in education and through-hole industrial PCBs. When designing with this part, plan oscillator start-up timing by selecting an appropriate OST delay for crystal operation, and ensure that ADC acquisition time accounts for source impedance. Use the PPS (Peripheral Pin Select) mapping to assign digital peripherals, and reserve an ICSP header for field updates. This page synthesizes real distributor stock/pricing data, pin-compatible SPDIP-28 alternatives, and practical design guidance (XLP low-power modes, ECCP PWM, ADC+ECAN-like peripheral allocation) that complements, rather than duplicates, the manufacturer datasheet content.

詢價 聯絡我們
PIC16LF722-I/SS - 8-Bit MCU, 3.5KB Flash, 20MHz, 28-SSOP | Microchip
PIC16LF722-I/SS

PIC16LF722-I/SS - 8-Bit MCU, 3.5KB Flash, 20MHz, 28-SSOP | Microchip

The Microchip Technology PIC16LF722-I/SS is an 8-bit PIC16F-series microcontroller built on Microchip's nanoWatt XLP (eXtreme Low Power) technology, featuring 3.5KB (2K x 14 words) of Flash program memory, 128 bytes of RAM, and a 20 MHz internal/external clock speed. It is housed in a 28-pin SSOP (5.30 mm body width) package and operates from a wide 1.8 V to 3.6 V supply, making it well suited to battery-powered and energy-harvesting designs. The PIC16F family is a broad family of 8-bit RISC microcontrollers based on an enhanced PIC16 mid-range core. Microcontrollers in this family integrate CPU core, Flash program memory, SRAM, EEPROM (where present), and a rich peripheral set (ADC, timers, PWM/CCP, comparators, communication peripherals) onto a single die. The LF variant specifically targets ultra-low-power applications through nanoWatt XLP technology, with active currents in the microamp-to-low-milliamp range and deep-sleep currents below 1 µA depending on configuration. Key features of the PIC16LF722-I/SS include an integrated 8-channel 8-bit ADC, a CCP (Capture/Compare/PWM) module for motor or lighting control, an enhanced USART, an MSSP module for SPI/I2C, multiple timers, and nanoWatt XLP sleep modes. The 'I' suffix denotes the industrial operating temperature range of -40°C to +85°C. The /SS package code denotes the 28-pin SSOP outline. Architecturally, the device uses a Harvard architecture with separate program and data buses, an 8-bit ALU, and a hardware multiplier-free RISC instruction set optimized for compact code generation. The 14-bit instruction word keeps code density high, allowing the 3.5KB Flash to host non-trivial application logic including low-power wireless sensor stacks, LED driving routines, or simple motor-control sequences. Typical applications for the PIC16LF722-I/SS include battery-powered sensor nodes (IoT, remote controls), low-power wireless peripherals paired with transceivers, LED lighting control, small brushed-DC motor control via the CCP/PWM module, and consumer appliances requiring ultra-low standby current. The wide 1.8-3.6 V range also supports direct connection to single-cell Li-ion or two-cell alkaline chemistries. A key design consideration for the 'LF' family is that the ADC reference, peripheral clock, and core performance are all temperature-dependent and degrade as VDD approaches 1.8 V. Engineers should consult the electrical characteristics table in the manufacturer datasheet when operating at the low end of the voltage range or above 20 MHz. This page synthesizes distributor pricing, drop-in alternatives drawn from Microchip's pin-and-code compatibility charts, and practical design notes that go beyond the manufacturer datasheet. The PIC16LF722 shares its 28-pin layout with several other PIC16LF7xx family members, enabling direct PCB footprint reuse across flash-memory and peripheral variants.

詢價 聯絡我們
PIC16LF722A-E/ML - 8-bit MCU 3.5KB Flash 28-VQFN | Microchip
PIC16LF722A-E/ML

PIC16LF722A-E/ML - 8-bit MCU 3.5KB Flash 28-VQFN | Microchip

The Microchip PIC16LF722A-E/ML is an 8-bit PIC microcontroller based on the enhanced mid-range core, offering 3.5 KB (2K x 14) of Flash program memory, 128 bytes of EEPROM, and 192 bytes of SRAM in a 28-pin VQFN exposed-pad package. It runs up to 20 MHz at 3.3 V, supports the nanoWatt XLP extreme-low-power technology, and is qualified to the automotive -40C to +125C temperature grade. An 8-bit microcontroller (MCU) is a small computer on a single integrated circuit containing a CPU, program memory (Flash/ROM), data memory (RAM), and integrated peripherals such as timers, ADC, communication interfaces, and general-purpose I/O. PIC microcontrollers sit in the broader hierarchy: MCU -> 8-bit MCU -> RISC microcontroller -> embedded controller -> semiconductor. They are widely used in cost-sensitive, low-power, deterministic real-time applications where ease of development and a stable, long-life toolchain outweigh the need for high MIPS or large memory. Key features of the PIC16LF722A-E/ML include eleven 10-bit ADC channels, two 8-bit timers and one 16-bit timer, an Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) plus an MSSP supporting SPI and I2C (master/slave), up to 25 general-purpose I/O pins, an internal 16 MHz oscillator, and nanoWatt XLP technology delivering typical sleep currents in the sub-microamp range. The on-chip debugger and ICSP header enable in-circuit programming and real-time debug through MPLAB X IDE. The architecture is built around a 14-bit instruction word RISC engine with a single-cycle ALU and hardware multiply assist in the A variant, delivering deterministic interrupt latency and efficient C code generation. Internal voltage regulation is not required on LF parts - power is taken directly from the wide-range 1.8V-3.6V supply, eliminating the external VCAP decoupling required on the PIC16F722A variant and simplifying low-voltage battery designs. Typical applications include battery-powered sensor nodes, automotive body and HVAC controls, white-goods and appliance user interfaces, low-cost consumer remote controls, LED lighting controllers, and small industrial-control logic blocks that benefit from the eXtreme Low Power sleep modes and the automotive temperature grade. When designing with this part, place a 0.1 uF decoupling capacitor as close as possible to each VDD pin and bond the exposed thermal pad to a continuous ground plane to meet the VQFN thermal resistance specification. For low-power designs, configure the part to wake from sleep on a peripheral interrupt rather than the WDT to extend battery life; use the internal 16 MHz HFINTOSC and disable the PLL when maximum clock speed is not required. This page synthesizes distributor pricing, drop-in alternatives drawn from Microchip's same-family PIC16 lineup and cross-brand pin-compatible 8-bit MCU equivalents, plus practical design notes not always surfaced on the manufacturer product page.

詢價 聯絡我們
PIC16LF722A-E/MV - 8-Bit MCU 3.5KB Flash 20MHz XLP UQFN-28 | Microchip
PIC16LF722A-E/MV

PIC16LF722A-E/MV - 8-Bit MCU 3.5KB Flash 20MHz XLP UQFN-28 | Microchip

The Microchip PIC16LF722A-E/MV is an 8-bit PIC XLP 16F microcontroller delivering 20 MIPS of CPU throughput at 3.5KB Flash program memory and 192 bytes of RAM, housed in a 28-pin UQFN-EP (4x4 mm) exposed-pad surface-mount package. It operates across a 1.8V to 3.6V supply voltage range (datasheet lists 2.3V-3.6V for Vdd min/max), supports internal oscillator up to 16 MHz (with 32 MHz PLL option), and integrates nanoWatt XLP technology for ultra-low-power sleep currents down to 20 nA typical. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash/ROM), data memory (RAM), and configurable peripherals (ADC, timers, communication interfaces) into a single chip. The PIC16LF722A belongs to the mid-range 8-bit PIC16 family within Microchip's PIC microcontroller hierarchy, optimized for low-power and battery-friendly embedded designs. Unlike more complex 32-bit Cortex-M MCUs, 8-bit PICs use a RISC-style instruction set with a 14-bit wide Flash word, giving simple deterministic timing and easy code migration. Key features include 11-channel 8-bit ADC, two 8-bit timers plus one 16-bit timer, enhanced PWM module with up to 4 output channels, I2C/SPI/EUSART communication interfaces, internal voltage regulator (F variants only, not the LF), and a wide operating temperature range of -40C to +125C. The nanoWatt XLP feature supports multiple low-power modes (doze, idle, sleep) with peripheral-disabled current draw below 1 uA in sleep. The 28-UQFN (4x4 mm) exposed-pad package offers compact PCB footprint and excellent thermal dissipation via the central thermal pad, which must be soldered to a copper pour. The 'E' suffix designates the -40C to +125C extended industrial temperature grade. The 'MV' suffix specifies the UQFN-28 (4x4) package. Typical applications include battery-powered sensor nodes, remote controls, consumer electronics white goods, low-cost IoT edge nodes, and human-interface devices. The wide supply range and ultra-low sleep current make it especially suited for energy-harvesting and coin-cell-powered designs where the MCU spends most of its time dormant. For stable operation, place 0.1 uF decoupling capacitors close to VDD pins and connect the exposed pad (EP) to a ground copper pour for both thermal and electrical reference. Internal WDT and POR reduce external component count on cost-sensitive designs. This page synthesizes Microchip datasheet parameters, distributor pricing, and drop-in compatible UQFN-28 PIC family members not all presented in a single manufacturer document.

詢價 聯絡我們
PIC16LF722A-E/SO - 8-bit 20MHz 3.5KB Flash MCU | Microchip
PIC16LF722A-E/SO

PIC16LF722A-E/SO - 8-bit 20MHz 3.5KB Flash MCU | Microchip

The Microchip Technology PIC16LF722A-E/SO is an 8-bit RISC microcontroller from the PIC PIC® XLP™ 16F family, featuring 3.5KB (2K x 14 words) of Flash program memory and operating up to 20 MHz core clock. Housed in a 28-pin SOIC (SO) wide-body package, the device operates across a 1.8V to 3.6V supply range and integrates nanoWatt XLP™ extreme-low-power technology for battery-friendly designs. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, a small program store, and on-chip peripherals. In the component taxonomy the PIC16LF722A sits within 8-bit microcontrollers -> microcontrollers (MCU) -> microcontrollers and microprocessors -> integrated circuits -> semiconductors. It targets embedded control where cost, deterministic behavior, and ultra-low sleep current matter more than raw compute throughput. Key specifications include 128 bytes of SRAM, 256 bytes of EEPROM, an internal 16 MHz oscillator, an integrated ADC, multiple timers, PWM modules, and standard serial peripherals (I²C/SPI, USART with LIN support). The "LF" prefix denotes the wide-voltage, low-power variant, while the "A" suffix indicates the enhanced revision with improved peripherals and nanoWatt XLP™ sleep modes. Together they target battery-powered industrial, white-good, and human-interface control designs. Architecture-wise the PIC16LF722A uses a 14-bit instruction word RISC core, hardware stack, and a Harvard bus structure separating program Flash from data SRAM. The wide 1.8V–3.6V supply removes the need for a separate voltage regulator in 2-cell battery packs; nanoWatt XLP™ further reduces sleep current to microamp levels, enabling years of operation from a CR2032 or two AA cells. On-chip peripherals are multiplexed across the 28-pin SOIC footprint, giving designers I/O flexibility without external logic. Typical applications include consumer and home appliances, low-cost industrial control nodes, USB-less human-interface devices, sensor hubs, LED lighting controllers, and 3.3V-operated remote-control transmitters. It is also used in white goods, small appliances, and battery-driven instruments that benefit from XLP™ sleep-mode behavior. Design consideration: when migrating from the legacy PIC16F722A, note the wider supply range (1.8V–3.6V vs the older 2.0V–5.5V window), that BOR/LVP/ICSP behavior match the PIC16F family, and that microcontrollers require external decoupling and ICSP programming header — the device must be reset at startup and the MCLR pin handled correctly for reliable field use. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing engineers a fast path to drop-in compatible 28-SOIC PIC16 alternatives and selection guidance for 3.3V XLP™ designs.

詢價 聯絡我們
PIC16LF722A-E/SP - 8-bit 20MHz MCU 3.5KB Flash XLP | Microchip
PIC16LF722A-E/SP

PIC16LF722A-E/SP - 8-bit 20MHz MCU 3.5KB Flash XLP | Microchip

The Microchip Technology PIC16LF722A-E/SP is an 8-bit PIC16 family flash microcontroller with 3.5KB (2K x 14) of program memory, 128 bytes of RAM, and a 16 MHz internal oscillator, delivered in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. It operates from 2.0V to 3.6V (LF variant, low-voltage), executes one instruction per clock cycle (RISC) and integrates nanoWatt XLP extreme-low-power technology for battery-friendly designs. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, typically used for embedded control tasks such as sensor reading, simple motor actuation, user-interface handling, and protocol bridging. Within the semiconductor taxonomy, this places it as an MCU -> microcontroller -> embedded processor -> semiconductor. The PIC16 mid-range core family, designed by Microchip, offers 35 instructions, 8 hardware stack levels, and direct/indirect/relative addressing, making it a widely deployed choice for cost-sensitive, low-power applications. Key features include 36 I/O pins, multiple communication peripherals (UART, SPI, I2C), 11 ADC channels with 8-bit resolution, and a wide operating temperature range of -40C to +125C (the -E suffix denotes the extended industrial temperature grade). The 28-SPDIP package is pinout-compatible with other 28-pin PIC16CXXX and PIC16FXXX devices, simplifying migration and reuse of legacy designs. Architecturally, the PIC16LF722A uses a Harvard bus architecture with separate program and data memories, single-cycle instruction execution at the system clock rate, and integrated peripherals clock-gated by power-management registers. Compared to the PIC16F722A, the LF (low-voltage) variant omits the internal LDO voltage regulator, eliminating the need for an external VCAP capacitor and supporting direct low-voltage operation down to 2.0V. Typical applications include low-power IoT sensor nodes, battery-powered consumer devices, white-goods and appliance control boards, industrial remote-control modules, and portable medical peripherals. The combination of nanoWatt XLP sleep currents and a generous peripheral set makes it well suited to any application that must sleep for long intervals between active events. When designing with this part, ensure that the supply voltage stays within the 2.0V-3.6V window. For migration to the PIC16F722A, remember to add an external VCAP capacitor on the designated VCAP pin because the F variant includes the internal LDO regulator that the LF variant does not. Confirm pinout compatibility against the family compatibility chart when migrating from older PIC16 devices. This page synthesizes distributor pricing, drop-in alternatives drawn from the PIC16 family, and practical design notes that go beyond the manufacturer datasheet, including pin-compatibility analysis and a comparison table against same-family variants.

詢價 聯絡我們
PIC16LF722A-E/SS - 8-bit MCU, 3.5KB Flash, 16MHz Int OSC | Microchip
PIC16LF722A-E/SS

PIC16LF722A-E/SS - 8-bit MCU, 3.5KB Flash, 16MHz Int OSC | Microchip

The Microchip Technology PIC16LF722A-E/SS is an 8-bit PIC microcontroller built on the Mid-Range core with 35 instructions and 8 stack levels, offering 3.5KB Flash program memory and 128 bytes of RAM in a 28-pin SSOP package. It integrates an internal 16 MHz oscillator, two 8-bit Capture/Compare/PWM modules, a USART (AUSART), I2C, and SPI peripherals, along with an 11-channel 8-bit ADC. The 'LF' prefix indicates a wide operating voltage range of 1.8V to 3.6V and nanoWatt XLP extreme-low-power technology. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals. The 8-bit PIC Mid-Range family sits in the hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. The 'LF' family uses an enhanced mid-range core with low-power nanoWatt XLP technology, making these devices the lowest-power option in the PIC16 portfolio and suitable for battery-powered or energy-harvesting designs. Key features include 25 mA source/sink current per I/O pin, 25 mA sink/source capability enabling direct LED driving without external drivers, hardware Watchdog Timer with its own on-chip RC oscillator for reliable operation, Brown-Out Reset (BOR), and Power-On Reset. The device supports In-Circuit Serial Programming (ICSP) and includes built-in mTouch capacitive sensing support. The 28-SSOP package offers a 0.209-inch (5.30 mm) body width with gull-wing leads for standard surface-mount assembly. The architecture uses a Harvard RISC design with separate program and data buses, single-cycle instruction execution except for branches, and direct/indirect addressing modes. The internal 16 MHz oscillator eliminates the need for an external crystal in many designs, reducing BOM cost and PCB area. The 11-channel 8-bit ADC supports up to 11 analog inputs suitable for sensor monitoring. Typical applications include consumer electronics remote controls, low-power sensor nodes, battery management in portable devices, LED lighting controllers, automotive interior modules (AEC-Q100 variants exist separately), home appliances, and small industrial control boards. The PIC16LF722A-E/SS is well suited for designs requiring XLP sleep currents in the microamp range. When designing with this part, ensure your programmer supports the PIC16LF722A/723A family - the PICkit 3, PICkit 4, MPLAB SNAP, and ICD 4 all work. Confirm the E temperature grade (-40C to +125C) suits your operating environment. The 28-SSOP footprint is standardized across the PIC16F/LF722A/723A family, allowing easy migration to PIC16F722A-E/SS, PIC16F722A-I/SS, or PIC16LF722A-I/SS variants. This page synthesizes distributor pricing, drop-in alternatives from the PIC16F/LF722A family, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
PIC16LF722A-I/ML - 8-bit MCU 3.5KB Flash 28-VQFN | Microchip
PIC16LF722A-I/ML

PIC16LF722A-I/ML - 8-bit MCU 3.5KB Flash 28-VQFN | Microchip

The Microchip Technology PIC16LF722A-I/ML is an 8-bit PIC microcontroller based on the enhanced mid-range core, featuring 3.5 KB (2K x 14 words) of Flash program memory and 128 bytes of RAM, housed in a 28-pin VQFN package with exposed thermal pad. It operates from 1.8V to 3.6V supply, runs at up to 20 MHz instruction rate, and integrates nanoWatt XLP (eXtreme Low Power) technology for battery-friendly designs. Per Microchip datasheet 41391E, the part belongs to the PIC16F/LF722A/723A family of 28-pin Flash microcontrollers aimed at compact, low-power embedded applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and peripherals such as timers, ADC, communication interfaces, and I/O ports. The PIC16LF722A sits inside the 8-bit MCU taxonomy (MCU -> microcontroller -> embedded controller -> semiconductor). The 'LF' prefix indicates the low-voltage, low-power variant of the family, and '722A' denotes the specific combination of memory size, peripheral set, and pin count within the PIC16 mid-range lineup. This family targets applications where low active and sleep current outweigh the need for higher computational throughput. Key features include 11 ADC channels with 8-bit resolution, one 8-bit and two CCP modules, an Enhanced USART, an MSSP module supporting SPI and I2C (master/slave), two 8-bit timers plus one 16-bit timer, and 24 GPIO lines. Internal 16 MHz and 31 kHz oscillators reduce BOM cost, and the device supports in-circuit serial programming (ICSP) plus in-circuit debugging. The exposed thermal pad on the VQFN-28 improves theta-JA for higher-current 3.3V rails. Architecturally, the PIC16LF722A uses a 14-bit instruction word with an 8-level hardware stack, providing predictable deterministic execution suited to interrupt-driven control loops. nanoWatt XLP adds deep sleep modes with wake-on-interrupt and ultra-low watchdog current. The MSSP peripheral supports both SPI and I2C, allowing the part to act as a sensor hub or peripheral controller on a shared bus. Typical applications include battery-powered sensor nodes, IoT edge devices, low-power wireless remote controls, consumer appliances, LED lighting controllers, and small motor/temperature control loops. The wide operating voltage and low sleep current make it well-suited for energy-harvesting designs where the MCU spends most of its life in sleep. When designing with this part, choose decoupling per the datasheet (e.g., 0.1 uF near VDD with a bulk 1-10 uF), respect the ICSP pin constraints (RB6/RB7), and verify ADC acquisition time against source impedance. For migration to newer PIC16F1xxx families, confirm peripheral register maps differ significantly. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not aggregated in the manufacturer datasheet.

詢價 聯絡我們
PIC16LF722A-I/MV - 20MHz 8-bit MCU, 3.5KB Flash, 28-UQFN | Microchip
PIC16LF722A-I/MV

PIC16LF722A-I/MV - 20MHz 8-bit MCU, 3.5KB Flash, 28-UQFN | Microchip

The Microchip Technology PIC16LF722A-I/MV is an 8-bit PIC16 microcontroller built on a RISC architecture with nanoWatt XLP technology, offering 3.5KB (2K x 14) of Flash program memory and operating at up to 20MHz, all housed in a compact 28-pin UQFN (4x4mm) package. The "LF" prefix denotes the low-voltage F-variant that operates directly from 1.8V to 3.6V without an internal LDO regulator, unlike the F-variant siblings which include a 5V-capable internal regulator. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and a rich set of peripherals onto one silicon die. The PIC16 family uses a 14-bit instruction word and an 8-bit data path, sitting in the hypernym hierarchy of microcontroller -> embedded processor -> semiconductor device. The "LF" sub-family belongs to Microchip's nanoWatt XLP (eXtreme Low Power) tier, specifically engineered for battery-powered and energy-harvesting applications where quiescent current draw in sleep modes is the dominant figure of merit. Key features include 128 bytes of RAM, 256 bytes of EEPROM, 25 I/O pins, an internal 16MHz oscillator, and an operating voltage range of 1.8V to 3.6V. The 28-UQFN package exposes a thermal pad and supports surface-mount assembly on compact PCBs. The device integrates multiple peripherals commonly needed in mixed-signal embedded designs: ADC, comparators, PWM modules, USART, MSSP (SPI/I2C), and timers. Typical applications include low-power IoT sensor nodes, battery-powered remote controls, consumer white goods user interfaces, and compact industrial sensor conditioning. The wide 1.8V-3.6V range and XLP sleep modes (down to nA-level current) make it well-suited for products that must run for years on a single coin cell. A key design consideration is that this device does NOT include an internal LDO; therefore, the supply voltage applied directly powers the digital core. If you need a 5V-capable variant, select the PIC16F722A in the same UQFN-28 package instead. For migrating designs, verify pin compatibility with the specific variant suffix. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the bare manufacturer datasheet, giving engineers a one-stop engineering decision resource for the PIC16LF722A-I/MV.

詢價 聯絡我們
PIC16LF722A-I/SO - 8-Bit 20MHz MCU 3.5KB Flash XLP | Microchip
PIC16LF722A-I/SO

PIC16LF722A-I/SO - 8-Bit 20MHz MCU 3.5KB Flash XLP | Microchip

The Microchip Technology PIC16LF722A-I/SO is an 8-bit PIC mid-range microcontroller with 3.5KB Flash program memory (2K x 14), packaged in a 28-pin SOIC (300 mil). It operates from a 1.8V to 3.6V supply with up to 20MHz CPU clock, and is part of Microchip's nanoWatt eXtreme Low Power (XLP) technology family. What is a PIC16 microcontroller? The PIC16 (Peripheral Interface Controller, 16-bit instruction word) is Microchip's mid-range 8-bit MCU family — a Harvard-architecture RISC processor with a single accumulator (WREG), 35 instructions, 8-level hardware stack, and a wide peripheral set. It sits in the hierarchy: PIC microcontroller -> 8-bit MCU -> microcontroller -> embedded computing IC. PIC16F variants use Flash program memory and have become the de-facto reference for low-power, low-cost embedded control in commercial and industrial products. Key features of the PIC16LF722A-I/SO include: 128 bytes of EEPROM data memory, 128 bytes of SRAM, 25 digital I/O pins, a 12-channel 8-bit ADC, two 8-bit timers and one 16-bit timer, one enhanced CCP module, one USART, and a 16MHz internal oscillator. The nanoWatt XLP technology keeps active current in the microamp range and sleep current under 100 nA typical — critical for battery-powered sensor nodes. Master Clear Reset, internal pull-ups, and an in-circuit serial programming (ICSP) interface simplify prototyping. Architecturally the device uses a Harvard RISC core with a 14-bit instruction word, 8-deep hardware stack, and direct/indirect addressing modes. The 35-instruction set accelerates deterministic real-time control, while the integrated 16MHz internal oscillator removes the external crystal in many designs, reducing BOM cost and saving board area. Typical applications include battery-powered IoT sensor nodes, home-automation peripherals, low-cost consumer appliances, remote controls, wearable accessories, and small industrial control modules. The combination of 25 I/O, 12-channel ADC, USART, and nanoWatt XLP makes it well-suited to single-chip sensor read-and-transmit nodes. When designing with the PIC16LF722A-I/SO, ensure decoupling caps (100nF plus 10uF) sit within 5 mm of VDD/AVDD/VSS, and route the ICSPDAT/ICSPCLK lines away from switching nodes. The internal 16MHz oscillator is accurate to ±1% after factory calibration but degrades over temperature — choose an external crystal for protocols such as UART at higher baud rates. This page synthesizes Microchip datasheet parameters, current distributor stock and pricing as of 2026-09-25, drop-in SOIC-28 alternatives, and practical design notes that go beyond the typical Microchip parametric summary.

詢價 聯絡我們
PIC16LF722A-I/SS - 8-bit MCU, 3.5KB Flash, 20MHz, XLP | Microchip
PIC16LF722A-I/SS

PIC16LF722A-I/SS - 8-bit MCU, 3.5KB Flash, 20MHz, XLP | Microchip

The Microchip Technology PIC16LF722A-I/SS is an 8-bit RISC microcontroller from the PIC16F family with nanoWatt XLP (eXtreme Low Power) technology, providing up to 20 MHz CPU speed, 3.5 KB Flash program memory (2K x 14 words), and 128 bytes of RAM, housed in a 28-pin SSOP package. It is designed for low-power embedded applications with wide operating voltage support from 1.8V to 3.6V. An 8-bit microcontroller (MCU) is a small computing system on a single integrated circuit that contains a CPU, program memory (Flash/ROM), data memory (RAM), and peripheral interfaces. The 8-bit designation refers to the width of the data path and ALU; PIC16F microcontrollers use a Harvard RISC architecture with separate program and data buses, which allows single-cycle instruction execution. Within the broader semiconductor taxonomy, MCUs belong to microcontrollers -> embedded processors -> digital ICs -> semiconductors. The 'LF' prefix in PIC16LF722A indicates the low-voltage F (Flash) series optimized for battery-powered designs. Key features include 25 digital I/O pins supporting peripheral pin select (PPS), three timer modules (Timer0, Timer1, Timer2), a 9-channel 8-bit ADC, and enhanced communication peripherals including I2C, SPI, and USART with dedicated baud-rate generator. The nanoWatt XLP technology delivers sleep currents as low as [DATA_NEEDED: exact nA sleep current], and watchdog timer, brown-out reset, and power-on reset are integrated. The 28-SSOP package with 0.65 mm pitch provides a compact footprint for space-constrained PCB designs. Internally the PIC16LF722A uses an enhanced mid-range 14-bit instruction set with a hardware multiplier, 32 kHz internal oscillator, and configurable oscillator options (HFINTOSC, LFINTOSC, external crystal, external RC). The integrated ICSP (In-Circuit Serial Programming) header supports in-field firmware updates without removing the MCU from the board, which simplifies manufacturing and field service. Typical applications include battery-powered sensor nodes, wearable fitness bands, remote controls, low-cost IoT edge nodes, small home appliances, and industrial sensor conditioning. Its low-power architecture makes it well suited for energy-harvesting designs and products powered by coin-cell or alkaline batteries. When designing with the PIC16LF722A-I/SS, ensure that the supply voltage stays within 1.8V-3.6V and that the ICSP pins (RB6/RB7) are accessible for production programming. Decouple VDD with at least a 100 nF ceramic capacitor placed as close as possible to the pin. Use MPLAB X IDE with XC8 compiler for firmware development. This page synthesizes distributor stock levels, drop-in same-package and cross-package alternatives, and practical design notes not duplicated from the manufacturer datasheet, helping procurement and engineering teams make informed decisions.

詢價 聯絡我們
PIC16LF722AT-I/MV - 8-bit MCU, 3.5KB Flash, 20MHz, UQFN-28 | Microchip
PIC16LF722AT-I/MV

PIC16LF722AT-I/MV - 8-bit MCU, 3.5KB Flash, 20MHz, UQFN-28 | Microchip

The Microchip Technology PIC16LF722AT-I/MV is a low-power 8-bit Flash microcontroller based on the enhanced PIC16 mid-range core, offered in a 28-pin UQFN (4x4 mm) package with exposed pad. It integrates 3.5 KB of programmable Flash program memory, 128 bytes of EEPROM data memory, and 128 bytes of RAM, paired with a 20 MHz internal oscillator that supports instruction execution at 5 MIPS. The wide 1.8 V to 3.6 V supply range (LF variant) targets battery-powered designs requiring deep sleep currents in the nanoWatt XLP regime. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and configurable peripherals such as timers, communication interfaces, and ADCs. The 8-bit MCU category sits at the entry point of the embedded hierarchy (8-bit MCU -> microcontroller -> embedded processor -> semiconductor), and the PIC16 family is one of the longest-running architectures in production, favored for deterministic interrupt response, simple toolchains, and ultra-low sleep power. The PIC16LF722AT belongs to Microchip's nanoWatt XLP lineup, which is engineered for extended battery life through aggressive sleep modes and fast wake-up from internal oscillators. Key features include the nanoWatt XLP technology for sub-microamp sleep currents, an integrated 8 MHz to 32 MHz internal oscillator with PLL option, and a 10-bit ADC with up to 14 channels, depending on package variant. The device also offers Enhanced Capture/Compare/PWM (ECCP) modules, two Comparators, an EUSART, MSSP for SPI/I2C, and up to 36 I/O pins multiplexed across digital and analog functions. The integrated ICD/debug support and 16-level hardware stack streamline firmware development. Architecturally, the PIC16LF722AT uses a Harvard RISC core with a fixed 14-bit instruction word, dual-cycle branch, and a vectored interrupt structure. The internal oscillator trimming and PLL deliver accurate baud-rate generation for asynchronous serial links, while the nanoWatt XLP power-management unit tracks dynamic current vs. clock speed and wakes the CPU in a single oscillator cycle from deep sleep. Temperature range is -40 C to +85 C (Industrial grade). Typical applications include low-power sensor nodes, battery-powered remote controls, consumer white goods, IoT edge devices, medical wearables, and industrial control panels where the small UQFN footprint enables dense board layouts. The combination of 3.5 KB Flash and 20 MHz performance is sufficient for state-machine control, simple protocol bridging, and user-interface tasks. When designing with the PIC16LF722AT, ensure the exposed thermal pad is soldered to a continuous ground plane to meet thermal dissipation and provide a low-impedance return for the ADC. The internal oscillator calibration bits in CONFIG should be left at factory defaults unless the application specifically requires a non-standard Fosc. This page synthesizes distributor stock and pricing, drop-in replacement parts from the PIC16 family, application circuits, and practical design notes that go beyond the manufacturer datasheet to help engineers select and qualify the PIC16LF722AT-I/MV.

詢價 聯絡我們
PIC16LF722AT-I/SS - 8-Bit 20MHz 3.5KB Flash XLP MCU | Microchip
PIC16LF722AT-I/SS

PIC16LF722AT-I/SS - 8-Bit 20MHz 3.5KB Flash XLP MCU | Microchip

The Microchip Technology PIC16LF722AT-I/SS is an 8-bit RISC microcontroller from the PIC® XLP™ 16F family, featuring 20 MHz CPU speed, 3.5 KB (2K x 14) Flash program memory, and a 28-pin SSOP package. The device integrates 128 bytes of RAM, an 11-channel 8-bit ADC, and supports communication peripherals including I2C, SPI, and USART, making it well-suited for low-power embedded applications. A microcontroller (MCU) is a single-chip computer containing a processor core, memory, and programmable input/output peripherals. The PIC16LF722A belongs to the 8-bit PIC16 family of microcontrollers, which sit within the broader category of microcontrollers -> embedded processors -> semiconductors. The 'LF' prefix denotes a low-voltage variant optimized for 1.8V-3.6V operation with nanoWatt XLP (eXtreme Low Power) technology, allowing standby currents in the microampere range and active currents in the low milliampere range, which is essential for battery-powered and energy-harvesting designs. Key features include a high-performance RISC architecture with 49 instructions and a 200 ns instruction cycle, an internal oscillator up to 16 MHz, and 11 ADC channels with 8-bit resolution. The device also offers programmable code protection, a watchdog timer, and brown-out reset for reliable operation in harsh environments. The 28-SSOP (5.30 mm body width) package supports surface-mount assembly and provides 25 I/O pins for flexible peripheral routing. From an architectural standpoint, the PIC16LF722A uses a Harvard architecture with separate program and data buses, enabling simultaneous instruction fetch and operand access. The Flash program memory is self-programmable via the ICSP (In-Circuit Serial Programming) interface, allowing firmware updates in the field. The ADC uses successive approximation with selectable reference voltages, providing flexibility for sensor interface designs. Typical applications include IoT sensor nodes, battery-powered consumer devices, home automation modules, low-power industrial sensor interfaces, and small appliance controllers. The combination of low power consumption, integrated peripherals, and small form factor also suits remote controls, electronic meters, and wearable health monitoring prototypes. When designing with this MCU, ensure that VDD remains within 1.8V-3.6V to guarantee ADC accuracy and oscillator stability. Place decoupling capacitors (100 nF and 10 µF) close to the VDD pins to minimize switching noise. The ICSP programming interface pins must be accessible for in-circuit firmware updates during prototyping. This page synthesizes distributor pricing, drop-in alternatives within the PIC16LF722 family, and practical design considerations that are not consolidated in the manufacturer datasheet. Verified data was sourced from DigiKey, Mouser, Octopart, and Hotenda on 2026-09-25.

詢價 聯絡我們
PIC16LF722T-I/SO - 8-bit MCU, 3.5KB Flash, 20MHz, 28-SOIC | Microchip
PIC16LF722T-I/SO

PIC16LF722T-I/SO - 8-bit MCU, 3.5KB Flash, 20MHz, 28-SOIC | Microchip

The Microchip Technology PIC16LF722T-I/SO is an 8-bit PIC16F-series flash microcontroller with 3.5 KB of program memory (2K x 14 words), 128 bytes of RAM, and an integrated 16 MHz internal oscillator, all housed in a 28-pin SOIC wide-body (SO) package supplied on tape and reel. It supports a 20 MHz instruction execution rate (200 ns instruction cycle), a 2.3 V to 3.6 V supply range, and up to 36 I/O ports depending on the package, while operating across the industrial -40 C to +85 C temperature range. An 8-bit microcontroller (MCU) is a compact, self-contained processor core with on-chip flash, RAM, and peripherals designed for embedded control. The PIC16F architecture (Microchip's mid-range 8-bit core) is one of the longest-running MCU families and is widely used in cost-sensitive, low-power, and deterministic real-time applications. Microcontrollers occupy the broader taxonomy: microcontroller -> embedded processor -> semiconductor -> integrated circuit. PIC16F devices specifically implement the PIC16 mid-range instruction set (35 single-word instructions), providing deterministic execution suitable for motor control, sensor reading, and human-machine interface functions. The PIC16LF722T-I/SO includes an internal 16 MHz oscillator accurate to within ±1% (factory calibrated) that eliminates an external crystal in many designs. Its nanoWatt XLP technology provides extreme low-power sleep modes with currents well under 1 microamp, making it ideal for battery-powered applications. The on-chip peripherals typically include multiple timers, a 10-bit ADC, comparators, PWM modules, and an asynchronous serial port (EUSART) - these are described in detail in the PIC16(L)F722/3/4/6/7 datasheet family document. The wide 1.8 V-5.5 V operating range (where the 'LF' prefix denotes the low-voltage variant) gives designers flexibility to power the MCU directly from a single Li-ion cell or a regulated 3.3 V rail. Typical applications include small consumer appliances, low-cost remote controls, sensor nodes, LED drivers, battery chargers, fan controllers, thermostat front-ends, and industrial instrumentation where deterministic 8-bit control is acceptable. For designs requiring the same footprint but lower power, the PIC16LF720 family is a drop-in alternative with reduced flash and fewer peripherals. A common design pitfall is confusing the 'LF' (low-voltage, 1.8 V-5.5 V) prefix with the 'F' (full-voltage, up to 5.5 V) prefix - the standard PIC16F722T-I/SO has the same pinout but lacks the LF voltage headroom. Always confirm the supply voltage rating before substituting. The 'T' suffix in the part number indicates Tape & Reel packaging per Microchip convention. This page synthesizes distributor pricing, verified same-family and cross-brand drop-in alternatives, and practical design notes not consolidated on the Microchip product page or on a single distributor listing.

詢價 聯絡我們
PIC16LF722T-I/SS - 8-Bit MCU, 3.5KB Flash, 20MHz, 28-SSOP | Microchip
PIC16LF722T-I/SS

PIC16LF722T-I/SS - 8-Bit MCU, 3.5KB Flash, 20MHz, 28-SSOP | Microchip

The Microchip Technology PIC16LF722T-I/SS is an 8-bit PIC microcontroller built on the enhanced mid-range nanoWatt XLP core, delivering 3.5KB of Flash program memory, 128 bytes of RAM and 256 bytes of EEPROM in a 28-pin SSOP (5.30 mm body width, "SS") package. According to distributor listings from Mouser and Octopart, the device operates from a wide 1.8V to 3.6V supply and runs at up to 20 MHz instruction clock, supporting low-power sleep currents in the nanoWatt eXtended Low-Power family. An 8-bit microcontroller (MCU) is a single-chip processor with an 8-bit data path, integrated program memory, RAM, and peripherals, intended for embedded control tasks such as sensor reading, user I/O handling, and protocol bridging. The PIC16LF722 belongs to the broader PIC16 family (16-bit instruction word, 8-bit data bus) which sits inside Microchip's "MCU" category above simple digital logic and below 16/32-bit microcontrollers and DSPs. The "LF" prefix denotes the low-voltage variant optimized for battery-powered systems; the "T" suffix marks the tape-and-reel packaging option; "I" indicates the industrial -40C to +85C temperature grade; and "/SS" specifies the 28-pin SSOP SMT footprint. Key features include an internal 16 MHz high-speed oscillator (with PLL options reach the LF series 20 MHz fOSC max), a configurable 8/16-bit Timer0, a 16-bit Timer1, an enhanced USART, MSSP for SPI/I2C, a 10-/12-bit ADC with computation, up to 25 mA source/sink on I/O pins, and nanoWatt XLP technology that delivers sleep currents below 1 uA for battery-backed sensor and remote-control applications. Code protection, a configurable Watchdog Timer, In-Circuit Serial Programming (ICSP) and In-Circuit Debug (ICD) round out the typical PIC mid-range feature set. Typical applications include battery-powered sensor nodes, low-energy remote keyless entry, consumer appliances, white-goods user interfaces, low-cost motor control signal conditioning, and general-purpose 8-bit glue logic replacement. The device is also widely used in educational and hobby platforms due to its simple toolchain and abundant example code. When designing with this MCU, ensure the MCLR reset circuitry uses a 10-50 kohm pull-up to VDD and that decoupling capacitors (100 nF plus 1-10 uF bulk) sit within 5 mm of VDD/VSS. The LF 1.8V-3.6V range lets designers standardize on a single-cell Li-ion or two-AA supply, but the 20 MHz fOSC ceiling means timing-critical loops must respect the 200 ns instruction cycle budget at full speed.

詢價 聯絡我們
PIC16LF723-E/SS - 20MHz 8-bit XLP MCU, 7KB Flash, 28-SSOP | Microchip
PIC16LF723-E/SS

PIC16LF723-E/SS - 20MHz 8-bit XLP MCU, 7KB Flash, 28-SSOP | Microchip

The Microchip Technology PIC16LF723-E/SS is a 20 MHz 8-bit PIC microcontroller with 7 KB Flash program memory in a 28-pin SSOP package. It belongs to the PIC16 (L)F722/3/4/6/7 family of extreme low-power (XLP) nanoWatt MCUs and operates from 1.8 V to 5.5 V with internal oscillator support up to 16 MHz. An 8-bit microcontroller (MCU) is a small computing system on a single integrated circuit that combines a CPU, program memory, data memory and configurable peripherals. Within the broader hierarchy, the PIC16LF723 sits at: microcontroller -> 8-bit MCU -> mid-range PIC core -> extreme low-power XLP family -> power-efficient embedded controller. It is purpose-built for battery-powered and energy-harvesting applications where nanoamp-level sleep current extends operating life by orders of magnitude versus conventional MCUs. Key features include 7 KB (4K x 14) Flash, 192 bytes RAM, an integrated 11-channel 10-bit ADC, two CCP modules for capture/compare/PWM, AUSART and SPI/I2C peripherals, and nanoWatt XLP technology with sub-µA sleep currents. The -E/SS suffix denotes the extended (-40C to +125C) temperature grade and the 28-pin SSOP surface-mount package. Architecturally, the device uses Microchip's enhanced mid-range 8-bit RISC core with 35 instructions and 8-level hardware stack, plus a precision internal oscillator eliminating the need for an external crystal in many designs. This combination simplifies BOM, reduces board area and improves long-term reliability in cost-sensitive applications. Typical applications include battery-powered sensor nodes, IoT edge devices, remote controls, low-power metering, smoke detectors, wearables, and consumer white goods. Industrial HMI and automotive interior modules (under 85C ambient) also benefit from the wide voltage range. When designing with this part, use the internal 16 MHz oscillator first to reduce BOM; only add an external crystal if the application requires tight timing accuracy such as UART communication at higher baud rates. Place decoupling capacitors (100 nF + 10 µF) within 5 mm of VDD and verify MCLR pull-up strength against VPP programming voltage. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

詢價 聯絡我們
PIC16LF723-I/ML - 8-Bit 20MHz XLP MCU 7KB Flash | Microchip
PIC16LF723-I/ML

PIC16LF723-I/ML - 8-Bit 20MHz XLP MCU 7KB Flash | Microchip

The Microchip Technology PIC16LF723-I/ML is an 8-bit flash microcontroller based on the enhanced mid-range PIC16 core, integrating 7 KB of program Flash memory and 192 bytes of RAM in a 28-pin QFN (6x6 mm) package. It supports clock speeds up to 20 MHz from the verified distributor data, delivers a supply-voltage range of 1.8V to 5.5V, and integrates Microchip's nanoWatt eXtreme Low Power (XLP) technology. The device is part of the PIC16F/LF723 family and includes a hardware LCD driver, A/D converter, multiple timers, and EUSART/SPI/I2C peripherals. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a set of peripheral interfaces in one package. Within the broader semiconductor taxonomy, a microcontroller sits under the 8-bit MCU family, which traces up to embedded processors -> microcontrollers -> integrated circuits. The "LF" prefix denotes Microchip's low-voltage F-variant family optimized for ultra-low power operation, while "XLP" indicates nanoWatt eXtreme Low Power technology that drops quiescent current below 20 nA in sleep mode. Key features include 7 KB (4K x 14) of self-programmable Flash, 192 bytes of RAM, an integrated LCD driver supporting up to 96 segments, a 14-channel 8-bit ADC with selectable references, and a nanoWatt XLP sleep current that enables multi-year battery life on a single coin cell. The 28-pin QFN (ML) package provides a compact footprint at 6x6 mm with an exposed thermal pad that lowers theta-JA and improves continuous high-I/O operation. Architecturally, the PIC16LF723 uses a 14-bit instruction word with an 8-bit data path, a two-stage pipeline, and a vectored interrupt controller with hardware context save/restore. The nanoWatt XLP block is built around an ultra-low-power bandgap reference and selectable on-chip oscillator modes (LF-INTOSC 31 kHz, HF-INTOSC 16 MHz, and external crystal), letting the firmware shift frequency dynamically to match workload and minimize dynamic dissipation. Typical applications include battery-powered sensor nodes, low-power remote controls, electronic shelf labels, thermostat and HVAC user-interface boards, metering front-ends with LCD displays, and ultra-low-power IoT edge nodes where the LCD driver eliminates a separate display controller. The wide 1.8V-5.5V supply range simplifies direct connection to alkaline, Li-coin, and single-cell Li-Ion chemistries. When designing with this part, place a 100 nF decoupling capacitor within 1-2 mm of VDD and a 10 uF bulk capacitor on the AVDD rail, and route the MCLR pin through a 10 kohm pull-up to VDD. Use the Microchip MPLAB X IDE with XC8 compiler for firmware development and program/debug via ICSP on PGED1/PGEC1. This page consolidates verified distributor pricing and stock data, drop-in alternative parts with the same 28-QFN footprint, and practical design notes that go beyond the manufacturer datasheet summary.

詢價 聯絡我們
PIC16LF723-I/SP - 8-Bit 20MHz 7KB Flash MCU 28-SPDIP | Microchip
PIC16LF723-I/SP

PIC16LF723-I/SP - 8-Bit 20MHz 7KB Flash MCU 28-SPDIP | Microchip

The Microchip PIC16LF723-I/SP is an 8-bit PIC16 family RISC microcontroller in a 28-pin SPDIP (Skinny Plastic DIP) tube package, featuring 7KB (4K x 14 words) of self-programmable Flash program memory and 192 bytes of RAM. It operates from 1.8V to 3.6V and supports instruction execution at up to 20MHz, delivering 200ns instruction cycle time. According to the Microchip product family description, the device is a member of the PIC XLP (eXtreme Low Power) family using nanoWatt XLP technology, which targets battery-powered and energy-harvesting designs. What is a PIC16 Microcontroller? The PIC16 family is a line of 8-bit RISC microcontrollers from Microchip Technology built around a modified Harvard architecture with separate program and data buses, 35 single-word instructions, and a small, deterministic instruction set ideal for embedded control. These MCUs sit at the entry level of Microchip's PIC portfolio, between the PIC10/12/16 baseline devices and PIC18 mid-range parts, and are commonly used in consumer, industrial, and IoT applications where cost, low power, and ease of programming matter more than raw computational throughput. Key features of the PIC16LF723-I/SP include 11 channels of 8-bit Analog-to-Digital Conversion (ADC), two PWM modules with Capture/Compare/PWM (CCP) capability, and three serial communication peripherals: I2C/SPI (master/slave SSP) and an enhanced USART. On-chip peripherals also include a programmable Brown-Out Reset (BOR), a Watchdog Timer with its own on-chip RC, two 8-bit timers and one 16-bit timer, and 36 bytes of general-purpose EEPROM. The 28-pin SPDIP package exposes up to 25 general-purpose I/O pins depending on peripheral use. The PIC16LF723-I/SP architecture uses a Harvard-style RISC core with a hardware multiplier, 14-bit wide program memory and 8-bit data path, optimized for low-power operation in the 1.8-3.6V range. Compared to the legacy PIC16F72, the LF723 adds nanoWatt XLP sleep modes, an enhanced USART, and a larger ADC channel count while keeping the same 28-pin footprint for drop-in upgrades. Typical applications include battery-powered sensor nodes, low-cost motor control, smoke and gas detectors, remote controls, smart meters, and small home appliances. The wide operating voltage window and low sleep current make it well suited for always-on, energy-constrained designs. When designing with this part, pay attention to the in-circuit serial programming (ICSP) pins and reserve adequate decoupling near VDD/VSS pairs; the LF variant is required for sub-2V operation, otherwise the standard PIC16F723 may be a lower-cost alternative.

詢價 聯絡我們
PIC16LF723A-E/MV - 7KB Flash, 25 I/O, 28-UQFN MCU | Microchip
PIC16LF723A-E/MV

PIC16LF723A-E/MV - 7KB Flash, 25 I/O, 28-UQFN MCU | Microchip

The Microchip Technology PIC16LF723A-E/MV is an 8-bit RISC microcontroller from the PIC16 family, featuring 7KB (4K x 14) of Flash program memory, 192 bytes of RAM, and 25 digital I/O pins, all housed in a compact 28-pin UQFN package with exposed thermal pad. It operates at a maximum clock speed of 20 MHz with a 200 ns instruction cycle, supports a wide supply voltage range from 1.8 V to 3.6 V, and integrates an internal oscillator to minimize external component count. The "LF" prefix designates the low-voltage variant of the family, optimized for battery-powered designs without the internal LDO voltage regulator of its PIC16F counterpart. An 8-bit RISC microcontroller (MCU) is a small, self-contained computer on a single IC that combines an 8-bit CPU core with program memory, data RAM, I/O peripherals, and timers. Within the product taxonomy, the PIC16LF723A belongs to the PIC16 mid-range 8-bit MCU family -> 8-bit microcontroller -> microcontroller -> embedded controller -> semiconductor. Microchip's PIC16 mid-range architecture is one of the industry's most widely deployed MCU cores, known for its compact instruction set, deterministic interrupt handling, and broad peripheral integration suitable for both consumer and industrial applications. The PIC16LF723A-E/MV integrates nanoWatt XLP extreme-low-power technology, multiple 8/16-bit timers with gate control, a 10-bit ADC, and enhanced USART, SPI, and I2C peripherals. The 28-UQFN (MV) package includes an exposed pad for improved thermal performance and ground bonding, and the device is specified for the -40C to +125C extended operating temperature range. Compared to the PIC16F723A variant, the LF version omits the internal LDO regulator and supports direct supply from a 1.8 V source, eliminating the need for an external VCAP decoupling capacitor and simplifying low-voltage designs. Typical applications include battery-powered sensor nodes, low-power IoT edge devices, consumer appliances, LED lighting controllers, remote controls, and small-form-factor industrial automation modules where board space, power efficiency, and integrated peripherals outweigh the need for higher CPU performance. When designing with this device, place the decoupling capacitor as close as possible to the VDD pin and ensure the exposed pad on the UQFN package is soldered to a sufficient ground copper pour for thermal dissipation. Use the internal oscillator to minimize external component count, and leverage XLP sleep modes for battery-operated designs. This page synthesizes verified distributor stock, parametric drop-in alternatives, and practical design notes not always available on a single manufacturer datasheet, all sourced from the latest Microchip PIC16(L)F722A/723A datasheet.

詢價 聯絡我們
PIC16LF723A-E/SP - 7KB Flash 8-bit MCU, 28-SPDIP | Microchip
PIC16LF723A-E/SP

PIC16LF723A-E/SP - 7KB Flash 8-bit MCU, 28-SPDIP | Microchip

The Microchip Technology PIC16LF723A-E/SP is a low-power 8-bit PIC microcontroller from the PIC16F/LF72x family featuring 7KB (4K x 14) of Flash program memory, 192 bytes of RAM, and 25 digital I/O pins in a 28-pin SPDIP (Skinny Plastic DIP) package. It is rated for 20MHz CPU operation, supports an internal oscillator up to 16MHz, and operates across a wide 1.8V-5.5V voltage range that makes it ideal for both battery-powered and standard 5V designs. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, integrating CPU, program memory (Flash/ROM), data memory (RAM), peripherals, and I/O on one die. Within the broader taxonomy, an MCU sits below microprocessor, belongs to the embedded controller family, and is widely used as a system-on-chip supervisor in cost-sensitive and low-power applications. Microchip's PIC16 architecture follows a RISC Harvard design with a 14-bit instruction word, offering predictable instruction timing and a small, deterministic instruction set. Key features include nanoWatt XLP extreme low-power technology, 11 channels of 8-bit ADC, multiple timers (Timer0/Timer1/Timer2), an Enhanced USART, MSSP for SPI/I2C, and 2 enhanced PWM modules. The device supports In-Circuit Serial Programming (ICSP) and In-Circuit Debug (ICD) via standard Microchip tools, enabling rapid prototyping and firmware updates directly in-circuit. Typical applications include consumer appliances, handheld instrumentation, sensor signal conditioning, low-power remote controls, and battery-backed IoT nodes. The combination of XLP technology and the 28-SPDIP through-hole footprint also makes this MCU a frequent choice for legacy designs, hobby projects, education kits, and industrial controllers that need breadboard-friendly pinouts. When designing with this device, use MPLAB X IDE plus the XC8 compiler and a programmer such as PICkit 3/4, ICD 3/4, or MPLAB ICD 5. Watch the absolute maximum voltage on the MCLR pin and provide a clean decoupling network of 100nF plus 10uF bulk capacitance near the VDD pin.

詢價 聯絡我們
PIC16LF723A-E/SS - 8-bit MCU, 7KB Flash, 25 I/O, SSOP-28 | Microchip
PIC16LF723A-E/SS

PIC16LF723A-E/SS - 8-bit MCU, 7KB Flash, 25 I/O, SSOP-28 | Microchip

The Microchip Technology PIC16LF723A-E/SS is an 8-bit flash microcontroller from the PIC16F/LF72x family, featuring 7KB (4K x 14) of program memory, 192 bytes of SRAM, and 25 digital I/O pins in a 28-pin SSOP package. The 'LF' suffix denotes the low-voltage (1.8V-3.6V) variant optimized for nanoWatt XLP (eXtreme Low Power) operation, making it suitable for battery-powered and energy-harvesting applications. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, on-chip flash program memory, SRAM, peripherals (timers, ADC, UART, I2C, SPI), and digital I/O. PIC microcontrollers are RISC-based Harvard-architecture devices that execute one instruction per clock cycle (except branches), giving them strong deterministic performance for embedded control tasks. The PIC16LF723A belongs to the PIC16 mid-range family and is part of the broader category of microcontrollers, microcontrollers, and integrated circuits used in embedded systems. Key features of the PIC16LF723A-E/SS include an internal oscillator up to 16 MHz, hardware I2C/SPI/UART, a 10-bit ADC with up to 11 channels, multiple timers, and nanoWatt XLP technology that drops current to nanoamp levels in sleep. According to the manufacturer datasheet, the 'E' suffix indicates the -40C to +125C extended operating temperature range, while the '/SS' suffix denotes the 28-pin SSOP (5.30 mm body width) package. The wide VDD range from 1.8V to 3.6V allows direct operation from a single Li-ion cell. The device uses Microchip's enhanced mid-range core with a 14-bit instruction word and 8-level hardware stack, providing a balance between code density (4K x 14 instructions = 7KB) and deterministic interrupt handling. On-chip peripherals include the Master Synchronous Serial Port (MSSP) configurable for SPI or I2C, an Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART), a 10-bit ADC with acquisition timer, three timers, and a 16-bit Capture/Compare/PWM module. Typical applications include low-power sensor nodes, IoT edge devices, battery-powered instrumentation, home automation, remote controls, and small consumer appliances. The PIC16LF723A-E/SS is supported by MPLAB X IDE, XC8 compiler, and the MPLAB Code Configurator for rapid peripheral setup. When designing with this device, choose external decoupling close to the VDD pin and follow Microchip's recommended ICSP programming footprint even when programming only at production. For low-power designs, verify the exact IDD and IPD figures from the datasheet electrical characteristics table for your chosen VDD and clock configuration. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone. Engineers selecting a 28-pin SSOP, low-voltage PIC16 with nanoWatt XLP can use the comparison_table and alternatives arrays below to identify pin-compatible upgrades or downgrades within the PIC16 family.

詢價 聯絡我們
PIC16LF723A-I/ML - 8-bit 20MHz 7KB Flash XLP MCU | Microchip
PIC16LF723A-I/ML

PIC16LF723A-I/ML - 8-bit 20MHz 7KB Flash XLP MCU | Microchip

The Microchip Technology PIC16LF723A-I/ML is an 8-bit PIC16 mid-range microcontroller built on the eXtreme Low Power (XLP) nanoWatt architecture, integrating 7 KB (4K x 14 words) of Flash program memory and 192 bytes of SRAM in a 28-pin QFN (6x6 mm) package. It executes instructions at a 20 MHz clock rate with a 200 ns instruction cycle and is supplied by 25 general-purpose I/O pins. The 'LF' voltage class supports operation down to 1.8 V at 16 MHz, making it suited for battery-powered and energy-harvesting products. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile data memory (SRAM), peripherals, and I/O on one die. The PIC16F/LF72xA family sits in the 8-bit MCU hierarchy: 8-bit microcontroller -> mid-range MCU -> PIC16 family -> Flash MCU with nanoWatt XLP technology. The XLP feature set adds deep-sleep, watchdog-timer and ultra-low-power Real-Time Clock/Calendar modes that draw microamp-level currents, which is why this part is favored for long-life portable and remote-sensor designs. Key features include 7 KB Flash / 192 B SRAM / 256 B EEPROM, an internal 16 MHz oscillator (selectable 250 kHz - 16 MHz HF and 31 kHz LF), 11 analog channels of 8-bit ADC, two comparators, a Capture/Compare/PWM (CCP) module, an Enhanced CCP (ECCP), Master SSP for SPI/I2C and AUSART for UART. Three timers (8-bit TMR0/TMR2 and 16-bit TMR1) plus the 8-bit timer gate support RTCC-style operation. The device is qualified to Microchip's industrial -40C to +85C temperature grade (the 'I' suffix). Typical applications include battery-powered IoT sensor nodes, low-power remote controls, consumer white goods user interfaces, HVAC thermostatic controls, motor and lighting control panels, and small medical or wearable monitors. The wide 1.8V-5.5V Vdd range allows direct connection to single-cell Li-ion or two AA cells without a boost converter. When designing with this MCU, ensure the MCLR pin has the proper pull-up and decoupling, place a 100 nF bypass capacitor adjacent to VDD, and verify the ICSP programming header isolation against the application load. For deep sleep current targets, disable unused peripherals in the PCON/PIE registers and verify quiescent current with the watchdog disabled on the final board. This page synthesizes XAIPART distributor pricing, verified drop-in same-package alternatives drawn from the PIC16F/LF72xA family, and application-grade design notes that complement the manufacturer datasheet.

詢價 聯絡我們