積體電路

子分類

📁 ADC/DAC 3,100+ 產品 📁 放大器 IC 1,900+ 產品 📁 音訊編解碼器 18 產品 📁 音訊 IC 2 產品 📁 時脈與計時 660+ 產品 📁 Comparator ICs 1 產品 📁 DSP 1,100+ 產品 📁 資料擷取 IC 2 產品 📁 數位電位器 4 產品 📁 顯示驅動器與控制器 1 產品 📁 FPGA 與 CPLD 7,300+ 產品 📁 介面 IC 3,300+ 產品 📁 LED 驅動器 1 產品 📁 邏輯 IC 460+ 產品 📁 記憶體 IC 870+ 產品 📁 微控制器 20,000+ 產品 📁 微處理器 4 產品 📁 馬達驅動器 1 產品 📁 其他 1 產品 📁 感測器與偵測器介面 1 產品 📁 特殊用途 IC 15 產品 📁 視訊 IC 14 產品

產品（39,000+)

PIC18LF6520-I/PT - 8-Bit MCU, 32KB Flash, 64-TQFP | Microchip
PIC18LF6520-I/PT

PIC18LF6520-I/PT - 8-Bit MCU, 32KB Flash, 64-TQFP | Microchip

The Microchip Technology PIC18LF6520-I/PT is an 8-bit PIC® RISC microcontroller featuring 32KB of Flash program memory, 2KB of RAM, and 52 digital I/O pins, housed in a 64-pin TQFP package (10x10 mm). It operates at up to 40 MHz, delivering up to 10 MIPS of processing throughput. The device supports a wide operating voltage range from 2.0 V to 5.5 V, making it suitable for both 3.3 V and 5 V system designs. An 8-bit MCU (microcontroller unit) is a single-chip computer integrating a CPU, memory, and peripherals. Within the broader taxonomy, this places the PIC18LF6520 in the PIC® 18F family -> 8-bit microcontroller -> microcontroller unit (MCU) -> embedded controller -> semiconductor IC. The PIC® architecture uses a RISC (Reduced Instruction Set Computer) instruction set with Harvard bus topology, separating program and data memory for predictable instruction timing. Key features include 32KB Flash program memory (16K x 16 words), 2KB SRAM data memory, 1KB EEPROM data memory, 52 I/O pins, a 10-bit Analog-to-Digital Converter (ADC) with up to 16 input channels, two USART modules for serial communication, MSSP (Master Synchronous Serial Port) for SPI/I2C, two CCP/ECCP modules, four timers, and a parallel slave port for external memory interfacing. The PIC18LF6520 architecture uses a 16-bit instruction word with an 8-bit data path, allowing dense code storage and efficient C-compiler utilization. The 'LF' variant denotes an extended voltage (2.0-5.5 V) core, and the 'I' suffix indicates an industrial temperature range of -40°C to +85°C. The 64-pin TQFP package offers ample I/O for human-machine interfaces, motor control, and instrumentation. Typical applications include industrial control systems, medical instrumentation, automotive body electronics, USB peripherals (with external transceiver), sensor hub processors, and embedded graphical user interfaces. The 52 I/O pins and rich peripheral set suit designs that demand multiple communication buses and analog sensor inputs. When designing with this MCU, ensure the configuration bits are correctly set for oscillator selection and watchdog timer behavior. The ICSP (In-Circuit Serial Programming) interface requires careful trace routing to avoid coupling noise into adjacent analog inputs. This page synthesizes distributor pricing, drop-in compatible alternatives, application guidance, and engineering design notes that go beyond what the manufacturer datasheet alone provides.

詢價 聯絡我們
PIC18LF6520T-I/PT - 40MHz 8-bit MCU 32KB Flash 64-TQFP | Microchip
PIC18LF6520T-I/PT

PIC18LF6520T-I/PT - 40MHz 8-bit MCU 32KB Flash 64-TQFP | Microchip

The Microchip Technology PIC18LF6520T-I/PT is an 8-bit RISC PIC microcontroller running at 40 MHz (10 MIPS) with 32 KB Flash program memory (16K x 16), 2 KB SRAM and 1 KB EEPROM, packaged in a 64-pin 10x10 mm TQFP with 54 digital I/O lines. It is the tape-and-reel, industrial temperature (-40C to +85C) version of the PIC18LF6520 family, suitable for automated high-volume assembly. An 8-bit microcontroller (MCU) is a single-chip processor with an 8-bit data path, on-board Flash program memory, RAM, and a rich set of peripherals (timers, ADC, UART, I2C, SPI, PWM). PIC18F/LF-series MCUs sit at the upper end of Microchip's 8-bit portfolio (PIC16 -> PIC18 -> PIC32), delivering 10 MIPS performance with Harvard RISC architecture and 16-bit instructions. PIC18LF variants support a wide 2.0V-5.5V operating range for low-voltage and battery-powered designs. Key features of the PIC18LF6520T-I/PT include: 40 MHz maximum clock (10 MIPS), 32 KB self-programmable Flash, 2 KB RAM, 1 KB data EEPROM, 54 I/O pins with individual direction control, multiple serial interfaces (2x USART, MSSP for SPI/I2C), two 8-bit and three 16-bit timers, 10-bit ADC up to 15 channels, two analog comparators, dual capture/compare/PWM modules, and a hardware 8x8 multiplier. The wide 2.0V-5.5V operating range enables single-rail designs from two AA cells to 5V industrial buses. Architecturally, the device uses Microchip's enhanced Harvard architecture with separate program and data buses, 32-level deep hardware stack, and a priority-interrupt controller supporting both legacy PIC16/PIC17 software migration and native PIC18 C development under MPLAB X with XC8. The 'LF' suffix designates the wide-voltage (2.0V-5.5V) variant, while 'T' in the MPN denotes tape-and-reel packaging and 'I' denotes industrial temperature grade. Typical applications include industrial control panels, HVAC controllers, motor control driver boards, low-power sensor hubs, USB-to-UART bridges, and home appliances. Designers benefit from decades of PIC18 code compatibility and broad third-party library support. When designing with this part, verify that your VDD rail stays within 2.0V-5.5V and use the internal 8 MHz RC oscillator or an external crystal up to 40 MHz depending on MIPS requirements. The 64-TQFP package provides ample I/O for parallel bus or matrix keypad interfaces. This page synthesizes distributor pricing, drop-in alternatives and practical design notes not found in the bare manufacturer datasheet.

詢價 聯絡我們
PIC18LF6525-I/PT - 8-bit MCU 48KB Flash 40MHz 64-TQFP | Microchip
PIC18LF6525-I/PT

PIC18LF6525-I/PT - 8-bit MCU 48KB Flash 40MHz 64-TQFP | Microchip

The Microchip PIC18LF6525-I/PT is a high-performance 8-bit RISC microcontroller with 48 KB of enhanced Flash program memory, 3,840 bytes of RAM, and 1 KB of EEPROM, housed in a 64-pin TQFP (PT) package measuring 10x10 mm. It operates at up to 40 MHz clock speed from a 2.0V to 5.5V supply and integrates a 10-bit A/D converter, ECAN module, and 52 digital I/O pins for embedded designs requiring rich connectivity and analog input. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, peripherals, and I/O on one die. The PIC18 family uses a Harvard RISC architecture with separate program and data buses, 16-bit opcodes, and a 31-level hardware stack, sitting in the broader taxonomy: PIC18 -> PIC microcontroller -> 8-bit MCU -> microcontroller -> semiconductor -> integrated circuit. This 'LF' variant is the eXtreme Low Power family tuned for low-voltage battery applications from 2.0 V upward. Key features include 48 KB Flash (24K x 16), 3,840 bytes data RAM, 1 KB EEPROM, hardware ECAN controller, 10-bit A/D with multiple channels, two USART modules, MSSP/SPI/I2C peripherals, and four timer modules. The 64-pin TQFP package gives the device 52 usable I/O lines, suiting dense I/O-bound applications like industrial control panels and CAN nodes. NanoWatt power management offers multiple idle, sleep, and run modes with on-the-fly oscillator switching. The PIC18LF6525-I/PT uses a 16-bit instruction word with an 8-bit data path, providing C-compiler-friendly operation and deterministic interrupt response. Its enhanced Flash supports self-programming under firmware control, enabling in-field bootloader updates. The integrated ECAN module implements CAN 2.0B active/passive with three transmit and two receive buffers, eliminating an external CAN controller on CAN nodes. Typical applications include industrial CAN-bus sensor nodes, automotive body and climate controllers, low-power metering, embedded control panels, and ECAN-connected motor drives. The wide 2.0-5.5V supply range and low-power modes make it well-suited to 3.3V and 5V mixed-rail systems as well as battery-powered instrumentation. When designing, ensure the decoupling capacitor network follows Microchip's recommended 0.1 uF plus 10 uF bulk placement, and review the oscillator configuration bits for the chosen crystal or resonator. Program memory endurance is rated 100K erase/write cycles minimum. This page combines manufacturer datasheet data, current distributor pricing, drop-in alternatives, and practical design notes that are not assembled on any single manufacturer page.

詢價 聯絡我們
PIC18LF6525T-I/PT - 8-Bit 40MHz MCU, 48KB Flash, TQFP-64 | Microchip
PIC18LF6525T-I/PT

PIC18LF6525T-I/PT - 8-Bit 40MHz MCU, 48KB Flash, TQFP-64 | Microchip

The Microchip Technology PIC18LF6525T-I/PT is an 8-bit RISC microcontroller from the PIC18F family, featuring a 40 MHz core, 48 KB of Flash program memory (24K x 16 words), 3.8 KB of SRAM (3840 bytes), and 1 KB of EEPROM, packaged in a 64-pin TQFP (10 x 10 mm) surface-mount form factor. The "LF" prefix denotes the low-voltage F-variant, supporting an extended supply voltage range of 2.0 V to 5.5 V, while the "T" suffix indicates Tape-and-Reel packaging and the "I" suffix designates the industrial temperature grade (-40C to +85C). The /PT package code denotes the TQFP-64 footprint. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), non-volatile storage (EEPROM), and a rich set of peripherals on one die. Within Microchip's taxonomy, the PIC18F family sits above the baseline PIC10/12/16 families in terms of performance and peripheral count - 8-bit MCU -> microcontroller -> embedded controller -> semiconductor. PIC18F parts add hardware multiply, larger linear addressing, and C-friendly architecture optimized for mixed C/assembly firmware development. Key features of the PIC18LF6525 include 54 digital I/O lines, up to twelve 10-bit ADC channels, two analog comparators, two USART modules, one MSSP (I2C/SPI) peripheral, two Capture/Compare/PWM (CCP) modules plus one Enhanced CCP (ECCP), a 16-bit timer with three 8-bit timers, an RTCC, and a parallel slave port for external bus expansion. The on-chip 10-bit ADC can reach 100 ksps and is supported by up to twelve input channels, which is sufficient for sensor interfaces in industrial and instrumentation systems. Architecturally, the PIC18LF6525 uses a Harvard-class 8-bit RISC core with a 16-bit instruction word, an 8-level hardware stack, and a 31-level software-managed stack for high-level language support. The 4.2 V to 5.5 V range quoted on distributor pages reflects the parametric ADC specification; the device itself supports a wider operating voltage range down to 2.0 V. Low-power nanoWatt technology features include multiple idle and sleep modes, an ultra-low-power wake-up timer, and software-controlled oscillator switching. Typical applications for the PIC18LF6525T-I/PT include industrial automation controllers, building HVAC and access-control panels, instrumentation front-ends with LCD/keypad interfaces, automotive body and chassis subsystems (non-safety), and consumer appliances requiring moderate Flash headroom (48 KB) and significant I/O count (54 lines). The combination of an 8-bit core with strong peripherals makes it well-suited for legacy firmware migration onto a stable, long-life Microchip platform. Designers should note that the LF variants add voltage-minimum operation down to 2.0 V, which is essential for battery-backed designs; when migrating between PIC18F6525 and PIC18LF6525 always confirm the brown-out reset voltage and the ADC reference selection. The parallel slave port allows direct connection to an external host CPU for use as a peripheral co-processor, and the large pin count (TQFP-64) provides ample I/O for keypad scanning and character LCD drives.

詢價 聯絡我們
PIC18LF6527T-I/PT - 48KB Flash 8-bit MCU with ECAN | Microchip
PIC18LF6527T-I/PT

PIC18LF6527T-I/PT - 48KB Flash 8-bit MCU with ECAN | Microchip

The Microchip Technology PIC18LF6527T-I/PT is a high-performance 8-bit RISC flash microcontroller with integrated ECAN and nanoWatt eXtreme Low Power technology, delivering 48KB of program Flash plus 4KB of RAM in a 64-pin TQFP (10x10 mm) tape-and-reel package. It is built around the PIC18 enhanced Harvard architecture with a 16-bit instruction word and executes most instructions in one cycle for an effective 40 MHz / 10 MIPS throughput at 4V. An 8-bit microcontroller is a single-chip computer built around an 8-bit data path, integrating CPU core, program memory (Flash/ROM), data memory (RAM), non-volatile EEPROM, timers, communications peripherals, ADC, and general-purpose I/O onto one silicon die. The PIC18 family belongs to the larger taxonomy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Within this hierarchy the LF sub-family targets low-voltage (2.0V-5.5V) battery-powered designs where nanoWatt sleep modes and active current management are critical. Key features of the PIC18LF6527 include 48KB (24K x 16) of self-programmable Flash, 4KB RAM, 1KB EEPROM, 70 digital I/O pins, a 12-channel 10-bit ADC with auto-acquisition, two ECAN modules, two MSSP (I2C/SPI) ports, two USART (LIN-capable) ports, nine programmable timers, dual analog comparators, a CTMU for capacitive touch or mTouch sensing, and nanoWatt power management that drops current draw to the nanoamp range in sleep. Architecture-wise the device uses a 16-bit wide instruction word fetched from Flash while data SRAM is byte-addressable, and the PIC18LF6527 is pin-compatible with the PIC18F6527 F-version (3.0V-5.5V) as well as the broader PIC18LF65xx/66xx family, enabling firmware and PCB reuse across voltage profiles. Hardware multiplier and multiple interrupt sources support DSP-style math and real-time control loops. Typical applications include industrial instrumentation panels, TCP/IP-enabled embedded sensor nodes, HVAC and building automation, automotive LIN/CAN nodes, battery-powered metering, capacitive touch human-machine interfaces, and large low-power connectivity designs that benefit from the four serial ports (2x synchronous, 2x asynchronous). When designing with this part, populate the CONFIG fuse register correctly for oscillator mode, watchdog, brown-out and code protection before code execution; confirm the TQFP-64 land pattern allows proper thermal relief, and confirm the 64-pin pinout matches the rest of the 65xx/66xx pin-compatible variants if you plan to migrate between F (5V) and LF (low-voltage) versions. This page synthesizes distributor pricing, drop-in PIC18 family alternatives, and practical design notes that complement the manufacturer datasheet.

詢價 聯絡我們
PIC18LF6585-I/L - 8-bit MCU, 48KB Flash, 40MHz, 52 I/O | Microchip
PIC18LF6585-I/L

PIC18LF6585-I/L - 8-bit MCU, 48KB Flash, 40MHz, 52 I/O | Microchip

The Microchip Technology PIC18LF6585-I/L is an 8-bit RISC microcontroller from the PIC18F family, featuring 48KB of Flash program memory (24K x 16), 3328 bytes of RAM, and 52 digital I/O pins, all housed in a 68-pin PLCC (J-Lead) package. It operates at a maximum clock frequency of 40 MHz, delivers up to 10 MIPS throughput, and integrates a 12-bit A/D converter with up to 12 channels, plus a hardware ECAN module for automotive and industrial networking. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data RAM, and a rich set of on-chip peripherals into a single IC. Within the broader semiconductor taxonomy, an MCU belongs to the category of embedded processors (alongside DSPs, FPGAs, and microprocessors) and is the workhorse of real-time control applications. The PIC18F series uses an enhanced Harvard architecture with separate code and data buses, giving it deterministic instruction execution ideal for interrupt-driven control loops. The 'LF' prefix designates the low-voltage variant supporting operation down to 2.0V, while the 'F' versions require 4.2V minimum. Key features of the PIC18LF6585-I/L include 1024 bytes of EEPROM data memory, an ECAN controller that supports CAN 2.0B active with prioritized message handling, a USART with LIN master/slave support, an MSSP for SPI and I2C, four timer modules (Timer0/1/2/3), a 10-bit PWM module, and nanoWatt power management for sleep-mode operation. The 'I' suffix indicates the industrial operating temperature range of -40C to +85C, making it suitable for non-automotive harsh environments. Architecturally, the PIC18LF6585 employs Microchip's enhanced 8-bit core with a 16-bit instruction word, an 8-level hardware stack, and a peripheral oscillator that allows independent timer operation from the main system clock. Its wide operating voltage range (2.0V to 5.5V) and low-power modes support battery-backed applications, while the ECAN module hardware-filters incoming frames to reduce CPU load in networked designs. Typical applications include industrial CAN-bus node controllers, HVAC control boards, building automation gateways, motor control front-ends, point-of-sale terminals, and embedded sensor hubs. Its 52 I/O pins provide ample headroom for keypad scanning, LCD driving, and parallel sensor aggregation. When designing with this device, ensure your MPLAB X IDE project selects the PIC18LF6585 device ID and confirm the 68-pin PLCC footprint matches your PCB land pattern. ECAN bus termination, oscillator stability, and Brown-Out Reset (BOR) configuration must be reviewed before firmware bring-up. This page synthesizes distributor pricing, same-brand drop-in alternatives from the PIC18 family, and practical design notes not consolidated in the manufacturer datasheet.

詢價 聯絡我們
PIC18LF6585-I/PT - 8-Bit 40MHz MCU 48KB Flash ECAN | Microchip
PIC18LF6585-I/PT

PIC18LF6585-I/PT - 8-Bit 40MHz MCU 48KB Flash ECAN | Microchip

The Microchip Technology PIC18LF6585-I/PT is a high-performance 8-bit microcontroller from the PIC18F family featuring integrated Enhanced CAN (ECAN) and eXtreme Low Power consumption, supplied in a 64-pin TQFP (PT) 10x10 mm package. The LF suffix denotes the low-voltage F-variant core that operates across 2.0V to 3.3V, making it tailored for battery-powered and portable designs. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), data memory (RAM), and a rich set of peripheral blocks (timers, ADC, communication controllers, I/O). The PIC18F family sits in the 8-bit RISC tier of Microchip's portfolio and is widely adopted in automotive node, industrial control, and consumer applications where deterministic behavior and long product lifetimes matter. Key features of the PIC18LF6585-I/PT include 48 KB of Flash program memory organized as 24K x 16 words, 3,328 bytes of RAM, an 8-channel 10-bit ADC, two analog comparators, two CCP modules, an Enhanced CAN 2.0B controller, and up to 52 digital I/O pins. The CPU core runs up to 40 MHz at 3.3V, with on-chip oscillator options and four programmable edge-triggered interrupt sources. The integrated ECAN peripheral supports CAN 2.0B active/passive and listens-only modes, device net filtering, and bit rates up to 1 Mbps. The architecture is built around a Harvard RISC core with a 16-bit instruction word, an 8-bit data path, hardware multiply, and a vectored interrupt controller. The instruction pipeline and 32-level hardware stack deliver deterministic interrupt latency suitable for real-time CAN and control loops. Typical applications include CAN-based industrial automation nodes, automotive body and chassis ECUs (non-safety critical), building automation HVAC controllers, sensor aggregation hubs, and low-power remote telemetry units. When designing with this part, pay attention to the decoupling network around VDD/VSS pairs, route the ECAN TX/RX lines as a matched differential pair, and program the CONFIG words at the top of Flash to lock oscillator, watchdog, and brown-out settings.

詢價 聯絡我們
PIC18LF6585T-I/L - 8-bit 40MHz 48KB Flash MCU 68-PLCC | Microchip
PIC18LF6585T-I/L

PIC18LF6585T-I/L - 8-bit 40MHz 48KB Flash MCU 68-PLCC | Microchip

The Microchip Technology PIC18LF6585T-I/L is an 8-bit PIC18F-series microcontroller running at up to 40 MHz, integrating 48 KB of Flash program memory (24K x 16), 3.25 KB (3328 bytes) of RAM, and 1 KB of EEPROM in a 68-pin PLCC (J-lead, 24.23 x 24.23 mm) package. It is part of the PIC18LFxx family of low-voltage (2.0V-5.5V) microcontrollers with 52 digital I/O pins and an on-chip 12-bit ADC, making it a long-standing workhorse for embedded control and CAN-enabled applications. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (Flash/ROM), volatile data memory (RAM), and a rich set of peripherals (ADC, timers, communication ports). The PIC18LF6585 belongs to the PIC18F family -> 8-bit MCU -> microcontroller -> embedded computing hierarchy, with Microchip's enhanced Harvard RISC architecture offering 16-bit instructions and deterministic interrupt latency. Key features include the enhanced CAN 2.0B controller, a 10-bit/12-bit ADC with up to 12 channels, four timer modules (Timer0-Timer3), two capture/compare/PWM (CCP) modules, an enhanced CCP (ECCP), a USART with IrDA, an MSSP for SPI/I2C, and a parallel slave port. The LF variant extends supply voltage operation down to 2.0V, making it suitable for battery-powered designs, while the 40 MHz oscillator enables instruction execution at 10 MIPS. Typical applications include industrial automation and process control, automotive body and chassis subsystems (LIN/CAN nodes), appliance controllers, HVAC equipment, instrumentation and data loggers, USB/serial converters, and general-purpose embedded platforms that need more I/O and CAN than smaller 28/40-pin PIC18 parts can offer. When designing with this part, observe the maximum 40 MHz Fosc at 4.2-5.5V and derate to 10 MHz at 2.0V. The 68-pin PLCC is a through-hole-friendly surface-mount package with J-leads - well suited to sockets, prototyping, and legacy board designs where pin replacement may be required. This page synthesizes distributor pricing, drop-in alternatives (including same-family PIC18F6585 variants), and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
PIC18LF6585T-I/PT - 8-Bit 40MHz 48KB Flash MCU 64-TQFP | Microchip
PIC18LF6585T-I/PT

PIC18LF6585T-I/PT - 8-Bit 40MHz 48KB Flash MCU 64-TQFP | Microchip

The Microchip Technology PIC18LF6585T-I/PT is an 8-bit PIC18F-family microcontroller with a 40 MHz core, 48 KB of Flash program memory (24K x 16), 3.25 KB of SRAM, and 1 KB of EEPROM, packaged in a 64-pin TQFP (10x10 mm, PT suffix) on tape-and-reel. It integrates an Enhanced CAN (ECAN) module, a 10-bit A/D converter with up to 12 input channels, and a 52 I/O pin count supporting most industrial and automotive body-electronics interfaces. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and a configurable set of peripherals (timers, ADC, communication controllers, I/O). The PIC18 family is Microchip's 8-bit high-performance architecture, sitting between the baseline PIC10/12/16 families and the 16-bit dsPIC/PIC24 families in the company's embedded-control hierarchy. LF variants run at lower core voltages (typically 2.0-3.6 V) and target low-power and battery-backed designs. Key features include 40 MHz maximum clock, 16-bit wide instruction word, 1024 bytes of EEPROM, ECAN 2.0B controller, up to 12-channel 10-bit ADC, two USART modules, MSSP (SPI/I2C), two CCP and one ECCP modules, four timers, and an industrial-grade operating temperature of -40C to +85C. The wide memory map (24K x 16 Flash) supports moderately complex state machines and CAN-based protocol stacks. The PIC18LF6585T-I/PT's nanoWatt Technology, idle/sleep modes with multiple wake-up sources, and on-board ECAN controller make it well-suited for power-conscious, networked embedded nodes. The architecture is a Harvard-design modified RISC core with 16-bit instructions and 8-bit data path, providing deterministic interrupt latency for real-time control loops. Typical applications include industrial automation and CAN-bus nodes, automotive body-electronics ECUs, HVAC and building-control controllers, motor control front-ends, and sensor/data-acquisition subsystems. The combination of 48 KB Flash and 3.25 KB RAM is sufficient for CANopen, DeviceNet, and J1939 protocol stacks. When designing with this device, budget oscillator start-up time (typically 1024 Tosc) before relying on timing-critical peripherals, and use Microchip's MPLAB X IDE with the free XC8 compiler for code generation. Decoupling: place a 100 nF capacitor on each VDD pin and a bulk 10 uF on the analog AVDD rail. This page synthesizes XAIPART distributor pricing, same-family drop-in alternatives, and practical design notes drawn from Microchip's PIC18F6680/8585/6685 family datasheet, going beyond raw repackaging of the datasheet.

詢價 聯絡我們
PIC18LF65K40-E/MR - 8-Bit 64MHz XLP MCU, 32KB Flash | Microchip
PIC18LF65K40-E/MR

PIC18LF65K40-E/MR - 8-Bit 64MHz XLP MCU, 32KB Flash | Microchip

The Microchip Technology PIC18LF65K40-E/MR is an 8-bit PIC microcontroller from the PIC18 XLP (eXtreme Low Power) 18K family, featuring a 64MHz CPU, 32KB (16K x 16) of Flash program memory, and a 64-pin VQFN (9x9) package with exposed pad (MR). The 'LF' suffix denotes the low-voltage variant supporting 1.8V to 3.6V operation, while the 'E' suffix indicates the Extended temperature grade (-40C to +125C). An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/EEPROM/RAM), and configurable peripherals on a single silicon die. PIC18 microcontrollers are mid-range 8-bit MCUs from Microchip that balance low power, deterministic performance, and rich peripheral integration. They sit within the broader hierarchy of MCU -> microcontroller -> embedded processor -> semiconductor, and the XLP sub-family targets battery-powered and energy-harvesting applications through aggressive low-power modes and nanoWatt technology. Key features of the PIC18LF65K40 include Core Independent Peripherals such as the Configurable Logic Cell (CLC), Complementary Waveform Generator (CWG), and Windowed Watchdog Timer (WWDT). The device integrates ECAN for industrial networking, a 10-bit ADC with up to 10 channels, 8-bit DAC, comparators, PWM, SMT (Signal Measurement Timer), and Peripheral Pin Select (PPS) for flexible signal routing. Memory comprises 32KB Flash, 2KB RAM, and 256 bytes of EEPROM. The 64-pin VQFN package with 9x9mm body and exposed thermal pad supports high-pin-count applications while enabling surface-mount assembly. The architecture uses an enhanced Harvard structure with separate program and data buses, allowing simultaneous instruction fetch and data access for sustained throughput. The integrated nanoWatt XLP technology provides ultra-low sleep currents suitable for always-on sensor nodes and IoT edge devices. Hardware CRC, Memory Scan, Zero-Cross Detect, and Hardware CVD (Capacitive Voltage Divider) further reduce host CPU overhead. Typical applications include industrial sensor interfaces with ECAN connectivity, low-power IoT edge nodes, consumer appliance control panels, building automation, automotive body and interior modules, and battery-powered instrumentation. The wide 1.8V to 3.6V range allows direct connection to a single Li-ion cell or 2x AA batteries. When designing with this device, prioritize peripheral pin assignment early because the PPS feature must be configured before first use. Place a 100nF decoupling capacitor on each VDD/VSS pair and ensure the exposed thermal pad is soldered to a sufficiently large copper pour for thermal dissipation. The ECAN module requires an external transceiver for physical bus connection.

詢價 聯絡我們
PIC18LF65K40-E/PT - 64MHz 8-bit XLP MCU, 32KB Flash | Microchip
PIC18LF65K40-E/PT

PIC18LF65K40-E/PT - 64MHz 8-bit XLP MCU, 32KB Flash | Microchip

The Microchip Technology PIC18LF65K40-E/PT is a high-performance 8-bit PIC18 microcontroller with Integrated ECAN, eXtreme Low Power (XLP) technology, and 32 KB Flash, 2 KB RAM, 256 B EEPROM, operating up to 64 MHz in a 64-pin TQFP (10x10 mm) package. It supports a wide 1.8 V to 5.5 V operating voltage range, includes a 10-bit ADC with Computation (ADC2), a 5-bit DAC, comparators, PWM, CCP, CWG, HLT, WWDT, SCAN/CRC, ZCD, PPS, EUSART, and SPI/I2C peripherals for general-purpose and low-power embedded designs. An 8-bit microcontroller (MCU) is a single-chip computer based on an 8-bit data bus architecture, integrating a CPU, memory, and peripherals into one package. The PIC18LF family sits within Microchip's 8-bit PIC hierarchy: PIC18 -> PIC18F (Flash) / PIC18LF (low-voltage Flash) -> 8-bit PIC MCU -> Microcontroller -> Integrated Circuit. The 'LF' prefix denotes low-voltage operation (down to 1.8 V) suited for battery-powered and energy-harvesting applications, while XLP technology minimizes sleep current for ultra-low standby power. Key features of the PIC18LF65K40 include Core Independent Peripherals (CWG, NCO, CLC) that offload tasks from the CPU, an IDLE/DOZE/PMD power management block, hardware CRC/SCAN for memory integrity, and Peripheral Pin Select (PPS) for flexible signal routing. The integrated ECAN module and dual EUSART enable robust wired communication for industrial networking, while the 5-bit DAC and zero-crossing detector (ZCD) simplify analog control loops without external components. The architecture combines a RISC Harvard-bus CPU with hardware multiply and a 31-level interrupt vector table, giving deterministic real-time response. The 64-pin TQFP package offers ample I/O (up to 60 GPIO) while keeping the board footprint compact at 10x10 mm with 0.5 mm pitch. ECC Flash and RAM support data retention and resilience against soft errors for industrial control, sensor hubs, and HMI applications. Typical applications include industrial control and automation, automotive body and sensor nodes, low-power IoT sensor nodes, HMI/keypad controllers, and consumer electronics with touch/proximity sensing. The wide 1.8 V-5.5 V supply allows direct Li-ion battery operation without external regulation, while 5 V tolerance on digital I/O simplifies interfacing to legacy 5 V logic. When designing with this MCU, plan for an external decoupling network of 100 nF and 10 uF near VDD pins, route the analog AVSS/AVDD pair separately from digital supplies, and use the PPS feature to remap peripheral pins without re-spinning the PCB. Choose PIC18F65K40 (non-LF) only if you do not need 1.8 V operation, otherwise the LF variant preserves battery life and BOM cost in low-voltage designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
PIC18LF65K40T-I/MR - 64MHz 8-bit MCU, 32KB Flash, 64-VQFN | Microchip
PIC18LF65K40T-I/MR

PIC18LF65K40T-I/MR - 64MHz 8-bit MCU, 32KB Flash, 64-VQFN | Microchip

The Microchip Technology PIC18LF65K40T-I/MR is an 8-bit PIC microcontroller from the PIC18LF XLP family, integrating 32KB of Flash program memory and 2KB of SRAM in a 64-pin 9x9 mm VQFN (MR) package with exposed thermal pad. The device runs at up to 64MHz and operates from 1.8V to 5.5V, supporting both low-power and 5V system designs. Tape and reel (T) packaging, industrial -40C to +85C temperature range, and 60 general-purpose I/O pins make this part a versatile choice for embedded applications. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, and programmable peripherals. Within the broader taxonomy, an 8-bit MCU sits below 16-bit and 32-bit MCUs in computational throughput, but typically offers lower cost, simpler toolchains, and deterministic interrupt latency that suit real-time control. PIC microcontrollers use a RISC-based modified Harvard architecture with separate program and data buses, allowing simultaneous instruction fetch and operand access. The 'LF' prefix designates the low-voltage, low-power (XLP) variant designed for battery-operated applications. Key features include 32KB (16K x 16) self-programmable Flash, 2KB SRAM, 1KB EEPROM, integrated ECAN module, multiple Capture/Compare/PWM (CCP) modules, 10-bit ADC with computation, and Core Independent Peripherals such as the Configurable Logic Cell (CLC), Complementary Waveform Generator (CWG), and Windowed Watchdog Timer (WWDT). XLP technology delivers nanoWatt sleep currents, enabling years of operation from a single cell in sleep-dominated duty cycles. The 64-pin VQFN (MR) package exposes a thermal pad that must be soldered to a ground pour for both electrical reference and heat dissipation. The large Flash/SRAM and rich peripheral mix suit applications including industrial control, automotive body modules, IoT sensor nodes, and human-machine interface (HMI) panels. Typical applications include CAN-connected industrial sensors, low-power IoT nodes with periodic wakeup, motor control with CCP/PWM, and 5V industrial control boards. The wide 1.8V to 5.5V range allows direct connection to single-cell Li-ion, 3.3V logic, or legacy 5V systems. When designing with this part, allocate sufficient PCB copper under the exposed thermal pad; missing this pad connection can cause thermal stress and electrical reference drift. Decouple VDD with at least one 100nF ceramic per power pin pair and a bulk 10uF, placed within 5mm of the IC body. This page synthesizes distributor pricing, drop-in alternatives from the PIC18 K40 family, and practical PCB layout notes that go beyond the manufacturer datasheet to accelerate your design-in.

詢價 聯絡我們
PIC18LF65K80T-I/PT - 8-bit XLP MCU, 64MHz, 32KB Flash, 64-TQFP
PIC18LF65K80T-I/PT

PIC18LF65K80T-I/PT - 8-bit XLP MCU, 64MHz, 32KB Flash, 64-TQFP

The Microchip PIC18LF65K80T-I/PT is an 8-bit PIC18 microcontroller featuring eXtreme Low Power (XLP) technology, 64 MHz operation, 32 KB of Flash program memory, 4 KB of RAM, and 1 KB of EEPROM, housed in a 64-pin TQFP (10x10 mm) package. It integrates a hardware ECAN module, an 11-channel 12-bit ADC, and a Charge Time Measurement Unit (CTMU) for capacitive touch and precise timing applications. An 8-bit microcontroller (MCU) is a compact, single-chip computer built around an 8-bit data path CPU, integrated Flash program memory, data RAM, and a rich set of on-chip peripherals (timers, ADC, communication ports). Within the broader taxonomy, this device is a microcontroller -> embedded controller -> semiconductor IC, optimized for low-power, deterministic real-time control in space-constrained designs. The PIC18 architecture delivers 16 MIPS performance at 64 MHz, making it well-suited for sensor reading, actuator control, and CAN-based networking in automotive, industrial, and consumer products. Key features include 5 timers, 2 analog comparators, 2 PWM channels, 2 EUSART modules, MSSP (SPI/I2C), an active-low MCLR reset, and an extended operating voltage range from 1.8 V to 3.6 V. The XLP nanoWatt technology provides sleep currents below 100 nA, enabling battery-powered designs that must run for years on a single cell. Hardware ECAN 2.0B support allows integration into automotive and industrial CAN networks without external controllers. The architecture uses a 16-bit instruction word with an 8-bit data path, 31-level hardware stack, and Harvard bus architecture for deterministic interrupt response. The CTMU peripheral enables capacitive touch sensing, temperature measurement via RTDs, and precision time-of-flight measurement using a constant-current source and timer capture - capabilities rarely found on basic 8-bit MCUs. Typical applications include automotive body and chassis ECUs, industrial sensor nodes and motor control, HVAC controllers, medical instrumentation with CAN connectivity, and consumer appliances requiring low standby power. The 64-pin TQFP footprint supports designs that need up to 54 I/O pins while staying compact. When designing with this part, observe the supply decoupling guidelines from the manufacturer datasheet and ensure programming/debugging connector access is preserved for in-circuit serial programming (ICSP). The 64-pin TQFP package is best handled with proper reflow profile and land pattern adherence per IPC-7351 to avoid tombstoning and cold joints. This page consolidates distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet alone, helping engineers shorten design-in time and select compatible parts confidently.

詢價 聯絡我們
PIC18LF6620-I/PT - 8-bit MCU 25MHz 64KB Flash 64-TQFP | Microchip
PIC18LF6620-I/PT

PIC18LF6620-I/PT - 8-bit MCU 25MHz 64KB Flash 64-TQFP | Microchip

The Microchip Technology PIC18LF6620-I/PT is a high-performance 8-bit RISC flash microcontroller in the PIC18F family, featuring 64 KB (32K x 16) of program Flash memory, an internal 64-pin TQFP (10x10) package, and a maximum CPU clock rate of 25 MHz (10 MIPS). The 'LF' prefix denotes an eXtreme Low Power variant supporting 1.8V to 3.6V VDD operation and the -I suffix specifies the -40C to +85C industrial temperature range. The PIC18LF6620-I/PT belongs to the PIC18F65/66xx device family which integrates an ECAN module, multiple timers, ADC, and a wide peripheral set. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), and peripherals such as timers, ADC, communication interfaces, and GPIO. Within the broader semiconductor taxonomy, 8-bit MCUs occupy the position of low-power, deterministic, easy-to-program devices used where 32-bit performance is unnecessary but reliability, cost, and code simplicity matter. The PIC18 family is one of Microchip's highest-performance 8-bit lines, employing an enhanced Harvard RISC architecture with hardware multiplier and 16-bit instruction width. Key features include 64 KB self-programmable Flash with 1024-byte single-word erase blocks, 3840 bytes of SRAM, an integrated 10-bit A/D converter with up to 12 channels, multiple USART/ECAN/SPI/I2C interfaces, four timer modules, and a wide operating voltage window from 2.0V to 5.5V across the LF family. The industrial temperature grade -I covers -40C to +85C ambient operation suitable for factory, automotive interior, and outdoor cabinet environments. The PIC18LF6620-I/PT uses a 16-bit instruction word with a two-stage instruction pipeline, achieving up to 10 MIPS throughput at 25 MHz. Its nanoWatt Technology provides sleep currents below 1 uA with multiple power-managed operating modes (PRI_RUN, SEC_RUN, RC_RUN, SLEEP, IDLE), and the on-chip ECAN controller supports CAN 2.0B active at up to 1 Mbps, which is why this device family became popular in automotive body and industrial networked control applications. Typical applications include industrial automation controllers, automotive body and HVAC modules, networked sensors using ECAN/CAN, USB/HID bridges paired with external PHYs, motor-control front-ends for small DC/stepper drives, and consumer appliance control boards. In each case the wide VDD range, large Flash, and on-chip CAN substantially reduce BOM cost compared with using an external transceiver MCU plus discrete protocol stack. When designing with this part, ensure the in-circuit serial programming (ICSP) pins (PGC/PGD) and the MCLR reset network are routed for accessibility and that VDD decoupling follows the datasheet's 100 nF + bulk capacitor recommendation. For low-noise analog performance, route AVSS/AVDD separately from digital VDD and use the dedicated VREF+ pin when the internal 2.5V/4.096V reference is selected. This page synthesizes Microchip factory data, distributor stock and pricing from DigiKey/Mouser, and an alternatives table covering the broader PIC18F66 family plus pin-compatible F46 and F65 K-series options not found on a single vendor page.

詢價 聯絡我們
PIC18LF6622T-I/PT - 8-bit 40MHz MCU, 64KB Flash, 64-TQFP | Microchip
PIC18LF6622T-I/PT

PIC18LF6622T-I/PT - 8-bit 40MHz MCU, 64KB Flash, 64-TQFP | Microchip

The Microchip PIC18LF6622T-I/PT is an 8-bit PIC microcontroller from the PIC18LF66xx family, featuring a 64KB (32K x 16) Flash program memory, 4KB RAM, and 70 I/O pins in a 64-pin TQFP (10x10 mm) package. Operating at up to 40 MHz, the device integrates Enhanced CAN (ECAN), two synchronous serial ports (I2C and SPI), and two asynchronous serial ports (LIN-capable USARTs), making it well-suited for connectivity-intensive embedded designs. A microcontroller (MCU) is an integrated circuit that combines a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a range of peripheral interfaces on a single silicon die. Within the broader semiconductor taxonomy, an MCU belongs to the class of embedded processors and, more specifically, the sub-family of 8-bit microcontrollers (8-bit CPU -> MCU -> microcontroller -> embedded processor -> semiconductor). The 'LF' prefix designates Microchip's nanoWatt extended-voltage line, capable of operating across 1.8 V, 2.5 V, 3.3 V, and 5 V rails - a critical feature for portable or battery-driven designs that demand ultra-low standby current. Key features include the ECAN module supporting CAN 2.0B active/passive and listen-only modes, a 10-bit A/D converter with up to 12 input channels, nanoWatt power management with multiple idle and sleep modes, and an integrated programmable 8-bit or 16-bit timer/counter array. The wide 1.8 V-3.6 V supply range (typical for LF variants) enables direct Li-ion or 2xAA battery operation while still supporting 5 V system interfaces through 5 V tolerant digital I/O. Typical applications include automotive body and HVAC networks (via ECAN and LIN), industrial sensor hubs (multiple UART + I2C sensor aggregation), home automation gateways, and large-display human-machine interface (HMI) controllers that benefit from the 70 I/O lines. A 64-pin TQFP with 0.5 mm pitch allows hand-solderable prototyping while remaining compatible with standard SMT lines. When designing with this part, ensure the supply voltage falls within the LF family's 1.8 V-3.6 V window for the LF suffix; the non-LF PIC18F6622 variant supports 2.0 V-5.5 V. Decouple VDD/VSS pairs with 100 nF ceramics placed within 5 mm of each pair. The CAN bus requires a transceiver IC such as the MCP2551; the MCU's ECAN peripheral handles only protocol-layer tasks. This page synthesizes distributor pricing, drop-in same-package alternatives, application references, and design notes that complement the manufacturer datasheet.

詢價 聯絡我們
PIC18LF6627-I/PT - 8-Bit 40MHz MCU 96KB Flash 64-TQFP | Microchip
PIC18LF6627-I/PT

PIC18LF6627-I/PT - 8-Bit 40MHz MCU 96KB Flash 64-TQFP | Microchip

The Microchip Technology PIC18LF6627-I/PT is an 8-bit RISC microcontroller from the PIC18F family, featuring a 64-pin TQFP (10x10 mm) package, 96 KB of on-chip Flash program memory (48K x 16 words), 4 KB of RAM, and a maximum CPU clock of 40 MHz. The part operates from a wide 2.0 V to 5.5 V supply range, supporting both LF (low-power F-series) low-voltage and 5 V designs with integrated ECAN, nanoWatt XLP power management, and up to 70 digital I/O pins. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals into one IC. Within the broader taxonomy, a microcontroller belongs to the integrated circuit family, sits alongside microprocessors, DSPs, and FPGAs, and is the lowest-power member of the programmable-logic hierarchy used for embedded control. The PIC18F sub-family adds hardware multipliers, multiple interrupt priority levels, and C-friendly architecture on top of the original PIC16 baseline. Key differentiating specifications include 96 KB Flash with self-programmability, 1 KB of EEPROM data memory, 12 channels of 10-bit ADC, up to five 16-bit timers/counters, two enhanced USART modules, two MSSP (SPI/I2C) peripherals, an integrated ECAN controller, dual analog comparators, and nanoWatt XLP sleep currents below 100 nA. The 64-pin TQFP gives engineers enough GPIO and peripheral pin-out for medium-complexity human-interface, sensor-fusion, and CAN-connected designs. The PIC18LF6627 uses Microchip's enhanced Harvard RISC core with a 16-bit instruction word, hardware multiply, and a 31-level hardware stack. The 'LF' suffix designates the low-voltage F-variant that supports 2.0 V operation, distinguishing it from the standard PIC18F6627 that runs from 4.2 V to 5.5 V. Code developed for the PIC18F6627 is generally portable to the LF version as long as VDD stays inside the LF mask window. Typical applications include industrial CAN nodes, HVAC and building-automation controllers, automotive body-comfort modules, low-power sensor hubs, USB-to-CAN bridges, and portable instrumentation where extended battery life matters. Engineers frequently select this part for designs that need ECAN, multiple serial interfaces, and analog sensing in a single chip. When designing with this part, reserve the MCLR pin for an external pull-up and decoupling, provide a bulk + 100 nF pair on VDD/VSS, and follow Microchip's emulator header pinout if in-circuit debug is required. Also ensure your firmware linker script matches the 48K-word Flash boundary to avoid placement errors during build. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet to help procurement and firmware engineers evaluate the PIC18LF6627-I/PT for new designs and second-source programs.

詢價 聯絡我們
PIC18LF6627T-I/PT - 96KB Flash 8-bit MCU 40MHz TQFP-64 | Microchip
PIC18LF6627T-I/PT

PIC18LF6627T-I/PT - 96KB Flash 8-bit MCU 40MHz TQFP-64 | Microchip

The Microchip Technology PIC18LF6627T-I/PT is a high-performance 8-bit PIC18F-series microcontroller running up to 40 MHz, with 96 KB of Flash program memory (48K x 16), 4 KB of RAM, and 1 KB of EEPROM, housed in a 64-pin TQFP (PT) package. It belongs to the low-voltage (LF) sub-family that operates from 2.0 V to 5.5 V, supporting 2.5 V, 3.3 V, and 5 V rails common in modern embedded designs. The 'T' suffix indicates tape-and-reel packaging and the 'I' suffix denotes the industrial -40C to +85C temperature range. A PIC microcontroller is a family of low-power, high-reliability 8-/16-/32-bit RISC microcontrollers built around Microchip's proprietary Harvard architecture. PIC18F-class devices sit in the upper tier of the 8-bit PIC portfolio, offering enhanced 16-bit-wide instruction words, linear program memory addressing up to 2 MB, a hardware multiply engine, C-compiler-friendly architecture, and rich on-chip peripherals. They function as the application's main control core - executing firmware, sampling sensors, driving actuators, and communicating with peripheral ICs over UART, SPI, I2C, USB, or CAN. Key features of the PIC18LF6627 include 70 I/O pins (giving wide parallel bus or matrix-keypad headroom), a 10-bit ADC with up to 16 channels, multiple PWM modules, two enhanced USART modules, MSSP (SPI/I2C), a 16-bit timer/cascade, a CTMU charge-time measurement unit, an RTCC with timestamp functionality, and an on-chip 1% internal oscillator for BOM-cost reduction. The device supports In-Circuit Serial Programming (ICSP) and In-Circuit Debug (ICD) via two pins, allowing firmware updates in the field without removing the MCU. Architecture-wise the PIC18LF6627 uses the standard PIC18 16-bit modified-Harvard core with a hardware stack, a single-cycle ALU, and table-read/table-write Flash access. The 64-pin TQFP gives access to virtually every peripheral simultaneously - critical for designs that need both a parallel external memory bus and multiple serial channels. Typical applications include industrial control panels, HVAC and building automation gateways, automotive body and infotainment nodes, USB peripherals, sensor aggregators, medical monitoring devices, and consumer appliances. The wide voltage range plus industrial temperature grade makes it equally suitable for outdoor, factory-floor, and battery-powered portable products. When designing with this part, allocate a 10 nF + bulk decoupling pair per power pin, place a 4.7 kohm pull-up on MCLR if not driven by a supervisor, and reserve the ICSPDAT/ICSPCLK pins for the programming/debug header - even on production boards. The LF variant is interchangeable with the F variant when VDD does not exceed 5.5 V, giving flexibility to switch F/LF based on inventory. This page synthesizes distributor pricing, drop-in alternatives, parameter comparisons, and practical design notes not aggregated in the manufacturer datasheet alone.

詢價 聯絡我們
PIC18LF6628T-I/PT - 96KB Flash 8-bit MCU, TQFP-64 | Microchip
PIC18LF6628T-I/PT

PIC18LF6628T-I/PT - 96KB Flash 8-bit MCU, TQFP-64 | Microchip

The Microchip Technology PIC18LF6628T-I/PT is a low-voltage 8-bit PIC18 RISC microcontroller featuring 96KB of Flash program memory, 4KB of SRAM, and 1024 bytes of Data EEPROM, housed in a 64-pin TQFP package supplied on Tape & Reel. It operates across a wide 2.5V/3.3V/5V range and integrates a 12-bit A/D converter with 12 channels, making it well suited for mixed-signal embedded designs where on-chip analog is required. An 8-bit microcontroller (MCU) is a programmable processor that executes instructions on 8-bit data words in a single clock cycle through a RISC architecture. The PIC18 family is Microchip's high-performance 8-bit line, sitting within the broader PIC taxonomy (PIC10/12/16/18/24/32) and providing richer peripherals, larger memory and 16-bit instructions compared to baseline PIC16 devices. The 'LF' prefix indicates a low-voltage flavor engineered for 2.5V-5.5V operation, while the 'F' variants support the full 2.0V-5.5V span. Key features include a 96KB Flash program memory, 4KB SRAM, 1024-byte Data EEPROM for non-volatile data storage, an integrated 12-bit ADC, multiple USART/SPI/I2C interfaces, and capture/compare/PWM modules. The TQFP-64 footprint provides ample GPIO for display, keypad, and sensor interfaces, while the -40C to +85C industrial temperature grade suits factory and outdoor equipment. The PIC18LF6628T-I/PT uses Microchip's enhanced PIC18 Harvard RISC architecture with a modified instruction set that retains code compatibility across the PIC18 family. Internal oscillator options, brown-out reset, and a 10-bit/12-bit ADC pipeline reduce external component count. Typical applications include industrial control panels, HVAC controllers, smart energy meters, medical instrumentation front-ends, and automotive body/comfort modules. The wide voltage range allows direct Li-ion or 3.3V system operation without additional regulation. When designing with this device, pay attention to the in-circuit serial programming (ICSP) pin assignments and reserve RA0/RA1 for analog when using the ADC. Proper decoupling (0.1uF + 10uF) near the VDD pins is critical for ADC accuracy, and unused I/O should be configured as outputs to minimize current draw. This page consolidates distributor pricing, drop-in compatible same-family alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single reference for sourcing and design-in decisions on the PIC18LF6628T-I/PT.

詢價 聯絡我們
PIC18LF6680-I/L - 64KB Flash, 40MHz 8-bit MCU, 68-PLCC | Microchip
PIC18LF6680-I/L

PIC18LF6680-I/L - 64KB Flash, 40MHz 8-bit MCU, 68-PLCC | Microchip

The Microchip Technology PIC18LF6680-I/L is an 8-bit PIC18F-family Flash microcontroller running at up to 40 MHz with 64 KB (32K x 16) of on-chip program memory, 3,328 bytes of RAM, and a 68-pin PLCC (J-lead) package. The -LF variant supports a wide 2.0 V to 5.5 V operating range optimized for low-voltage and battery-backed designs while retaining the full peripheral set of the PIC18F6680 family. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a configurable set of digital and analog peripherals. Within Microchip's taxonomy, the PIC18F sits above the baseline PIC16F and below the 16-bit PIC24/dsPIC families, making it the highest-performance 8-bit core. Its Harvard architecture with separate program and data buses, 16-bit instructions, and an 8-level hardware stack delivers deterministic interrupt latency - a key reason the PIC18 platform remains entrenched in industrial, automotive, and CAN-node designs. Key features of the PIC18LF6680-I/L include an integrated CAN 2.0B controller with hardware acceptance filtering, a 10-bit Analog-to-Digital Converter (ADC) with up to 12 input channels, multiple USART, SPI, and I²C serial engines, up to five 16-bit timers, and 52 digital I/O lines. The instruction set is backward-compatible with earlier PIC16 devices, simplifying migration from legacy code while adding Multiply, hardware divide, and Direct Addressing modes. Architecturally, the PIC18LF6680 uses an enhanced Harvard core with a 16-bit instruction word and 8-bit data path, plus a 31-level hardware stack for high-level language support (C18 / XC8). Its Enhanced CAN module offloads the entire CAN 2.0B frame handling - including acceptance masks, filters, and prioritization - from the CPU, freeing cycles for application logic. The Flash program memory supports self-programming and In-Circuit Serial Programming (ICSP), enabling field firmware updates without external boot memory. Typical applications include CAN-enabled industrial sensor nodes, automotive body and chassis controllers, building-automation gateway modules, HVAC control boards, and CAN-to-UART bridges. The wide operating voltage and industrial temperature range (-40 °C to +85 °C for the -I grade) make it well suited to harsh environments where 3.3 V or 5 V rails are present and CAN bus isolation is required. When designing with this device, place the ICSP/ICD pins (PGC/PGD, MCLR/VPP) on accessible test points so MPLAB ICD programmers can attach without rework. The CAN TX/RX pins must be paired with a transceiver (e.g., MCP2551 or MCP2561) - the PIC18LF6680 cannot drive a CAN bus directly. Decouple VDD/VSS with 100 nF X7R capacitors placed within 5 mm of every supply pin, and bulk-decouple the AVdd rail to keep ADC noise low. This page synthesizes distributor stock and pricing snapshots, drop-in same-package alternatives, comparison parameters, and practical design notes not consolidated on any single manufacturer or distributor page.

詢價 聯絡我們
PIC18LF6680-I/PT - 8-Bit 40MHz 64KB Flash ECAN MCU | Microchip
PIC18LF6680-I/PT

PIC18LF6680-I/PT - 8-Bit 40MHz 64KB Flash ECAN MCU | Microchip

The Microchip Technology PIC18LF6680-I/PT is an 8-bit RISC microcontroller from the PIC18LF66/67 family operating at up to 40 MHz, integrating 64 KB (32K x 16) of self-programmable Flash program memory and housed in a 64-pin TQFP (10x10 mm) package. It features integrated Enhanced CAN (ECAN), a 10-bit ADC, and Microchip's eXtreme Low Power (XLP) technology, with an industrial operating temperature range of -40C to +85C. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data memory and integrated peripherals. The PIC18F family uses an enhanced Harvard RISC architecture with 16-bit instruction words and an 8-bit data path, optimized for deterministic interrupt response and low-power embedded control. The PIC18LF6680-I/PT falls within the broader taxonomy: microcontroller -> 8-bit MCU -> PIC18 family -> ECAN-enabled sub-family -> Microchip 8-bit portfolio. Key features include 53 digital I/O pins, 10-bit ADC resolution, 3.25 KB data RAM, hardware ECAN module compliant with CAN 2.0B active, and an operating supply voltage range of 2.0V to 5.5V supporting 2.5V/3.3V/5V rails. The wide voltage range combined with XLP nanoWatt sleep modes (down to sub-microamp currents) makes this MCU suitable for both line-powered industrial nodes and battery-operated sensor platforms. The ECAN peripheral implements CAN 2.0B active with acceptance filters, time-stamping, and bus health diagnostics, allowing peer-to-peer communication at 1 Mbit/s without an external controller. Combined with 64 KB self-programmable Flash and Microchip's ICD/debug support, designers can implement field-upgradeable CAN nodes in automotive, industrial automation, and building-control networks. Typical applications include CAN-based factory automation nodes, automotive body and chassis controllers, building automation (BACnet/HVAC), medical instrumentation data acquisition, and low-power remote sensor platforms. The integrated ECAN eliminates the need for an external CAN transceiver controller, reducing PCB area and BOM cost. Designers should note that migrating between PIC18LF66xx and PIC18LF65xx devices within the same family allows seamless code reuse due to peripheral compatibility. For new designs, consider PIC18F66K80-family parts if extended peripherals or larger RAM are required. This page synthesizes distributor pricing, parametric drop-in alternatives from the same Microchip PIC18LF66xx family, and practical design notes beyond the manufacturer datasheet, providing information gain not found on standalone vendor pages.

詢價 聯絡我們
PIC18LF6680T-I/L - 40MHz 8-bit MCU, 64KB Flash, 68-PLCC | Microchip
PIC18LF6680T-I/L

PIC18LF6680T-I/L - 40MHz 8-bit MCU, 64KB Flash, 68-PLCC | Microchip

The Microchip PIC18LF6680T-I/L is an 8-bit PIC18F-family microcontroller operating up to 40 MHz, integrating 64 KB of Flash program memory (32K x 16 words), 3,328 bytes of RAM and 1 KB of EEPROM into a 68-lead PLCC (Plastic Leaded Chip Carrier) package. The 'LF' prefix denotes an extended low-voltage core variant optimized for 2.0 V to 3.6 V operation, while the 'T' suffix indicates Tape & Reel packaging and the 'I' grade specifies an industrial temperature range of -40 °C to +85 °C. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, peripherals and I/O. The PIC18F family is Microchip's high-performance 8-bit architecture, sitting above the baseline PIC16 line in Flash capacity, peripheral count and instruction throughput, and below the 16-bit dsPIC/PIC24 and 32-bit PIC32 families. PIC18 devices are widely used in industrial control, automotive body and sensor, consumer appliance and embedded-communication designs where deterministic behavior and robust peripherals outweigh raw CPU speed. Key features include 52 digital I/O pins, multiple 16-bit timers, a 10-bit ADC with up to 12 input channels, two analog comparators, two USART modules, MSSP (SPI/I2C), an enhanced CAN module, and a 16-bit wide data path. The 64 KB Flash supports self-programming under firmware control, enabling in-field boot-loader and parameter storage flows. Hardware multipliers and a priority-interrupt controller deliver predictable real-time response. The 'LF' silicon uses Microchip's nanoWatt technology to drop supply current during sleep into the nanoamp range while retaining RAM and interrupt logic, an important trait for battery-backed or always-on sensor nodes. Combined with the on-chip ECAN controller, this device is a strong fit for industrial fieldbus and CAN-based distributed systems where the host processor must wake quickly on bus traffic and return to low-power idle between events. Typical applications include industrial CAN node endpoints, sensor and meter reading modules, automotive body-electronics sub-modules, building-automation controllers, and general-purpose 8-bit embedded platforms requiring more memory and I/O than a 28- or 40-pin PIC18 can supply. When designing with the PIC18LF6680T-I/L, respect the 68-PLCC through-hole land pattern; the PLCC package is preferred for sockets, field replacement and high-reliability applications, but requires plated through-holes that differ from surface-mount footprints.

詢價 聯絡我們
PIC18LF6680T-I/PT - 8-bit 40MHz MCU, 64KB Flash, 64-TQFP | Microchip
PIC18LF6680T-I/PT

PIC18LF6680T-I/PT - 8-bit 40MHz MCU, 64KB Flash, 64-TQFP | Microchip

The Microchip Technology PIC18LF6680T-I/PT is a low-power 8-bit PIC microcontroller built on the enhanced PIC18 instruction set architecture, delivering up to 40 MHz (10 MIPS) core performance with 64 KB (32K x 16) of on-chip Flash program memory and 3.3 KB of RAM, housed in a 64-pin TQFP (10x10 mm) surface-mount package. The 'LF' designation indicates a wide operating voltage range of 2.0 V to 5.5 V with optimized low-power characteristics, while the 'T' suffix indicates tape-and-reel packaging, and 'I/PT' denotes industrial temperature grade (-40°C to +85°C) in TQFP. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of programmable peripherals into one IC. The PIC18 family is Microchip's mid-range 8-bit line, positioned between the baseline PIC10/12/16 series and the 16-bit PIC24/dsPIC families, optimized for cost-sensitive embedded control with deterministic interrupt response. Key features of this device include 1 KB of EEPROM data memory, a 10-bit Analog-to-Digital Converter (ADC) with up to 12 input channels, multiple Enhanced USART, I2C, and SPI serial interfaces, a 16-bit capture/compare/PWM module, an integrated CAN 2.0B controller, and a hardware 8x8 multiplier supporting single-cycle operations. The 64-pin TQFP package exposes 52 digital I/O pins, providing ample connectivity for mixed-signal sensor hubs and communication bridges. Architecturally, the PIC18LF6680 uses a RISC-style Harvard bus with separate program and data memory paths, a 16-bit instruction word, and an 8-bit data path. The 40 MHz oscillator drives a 4-phase clock pipeline achieving 10 MIPS throughput, while nanoWatt technology enables deep sleep currents below 1 µA in idle modes. The integrated CAN module (ECAN™) provides 2.0B active compliance with hardware acceptance filters. Typical applications include CAN-based industrial automation nodes, automotive body and chassis controllers, building automation sensor gateways, HVAC control boards, and embedded sensor hubs requiring reliable low-power operation with mixed-signal I/O. The wide 2.0 V to 5.5 V supply tolerance also makes it suitable for battery-backed systems. When designing with this MCU, ensure decoupling capacitor placement follows Microchip's TQFP-64 reference layout with 100 nF ceramics near each power pin. Reserve the ICSP/ICD pins (PGC/PGD) for in-circuit programming access, and route the CAN TX/RX lines with characteristic impedance matching for reliable bus operation above 125 kbps. This page synthesizes distributor stock data, drop-in compatible replacements within the PIC18LF family, application design guidance, and parametric comparison tables not consolidated in the standalone Microchip datasheet.

詢價 聯絡我們
PIC18LF66K40-E/MR - 64KB Flash 8-bit XLP MCU 64-VQFN | Microchip
PIC18LF66K40-E/MR

PIC18LF66K40-E/MR - 64KB Flash 8-bit XLP MCU 64-VQFN | Microchip

The Microchip Technology PIC18LF66K40-E/MR is an 8-bit PIC microcontroller from the PIC18 XLP family, delivering 64 MHz CPU performance, 64 KB Flash program memory and 64-pin VQFN (9x9 mm) packaging. It is designed for low-power and CAN-connected embedded designs with a wide 1.8 V to 5.5 V operating voltage range and integrated Core Independent Peripherals. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a rich set of digital, analog, and communication peripherals into one package. The PIC18 family extends Microchip's 8-bit architecture with a 16-bit instruction word, hardware multiplier, and Linear Program Memory model up to 128 KB, while XLP (eXtreme Low Power) variants add nanoWatt technology such as ultra-low sleep current, peripheral module disable, and multiple low-power sleep modes. In a typical system hierarchy, an MCU sits above bare 8-bit CPU cores and below 16/32-bit MCUs in compute capability, but excels at deterministic I/O response and ultra-low standby power. Key features include 64 KB Flash, 4 KB RAM, 1 KB EEPROM, 64 MHz internal oscillator, 1.8 V to 5.5 V VDD, integrated ECAN module, up to 7 PWM channels, 12-bit ADC with Computation (ADCC), Zero-Cross Detect, Complementary Waveform Generator (CWG), Windowed Watchdog Timer (WWDT), CRC/Memory Scan, Peripheral Pin Select (PPS), and Hardware Capacitive Voltage Divider (CVD). XLP technology delivers typical sleep currents below 50 nA with RTCC enabled, enabling battery-powered products to run for years on a single cell. Architecturally the PIC18LF66K40 uses a Harvard bus with separate code and data paths, a 16-bit instruction set with 8-bit data paths, and a hardware multiply/divide engine that accelerates math for sensor processing and motor control loops. Core Independent Peripherals such as CWG, WWDT, and Hardware CVD operate without CPU intervention, freeing the core for application logic and reducing firmware complexity. The 12-bit ADCC supports averaging, oversampling, threshold comparisons, and automatic accumulators. Typical applications include industrial CAN nodes (sensor hubs, motor drives, building automation), low-power IoT sensors, automotive body and climate subsystems, consumer white goods with touch interfaces, portable medical monitors, and USB-CDC/HID bridges. The wide 1.8 V to 5.5 V range allows direct connection to single-cell Li-ion or 3.3 V/5 V regulated rails without additional level shifters. When designing with this device, ensure that the PPS mapping is finalized before pin assignment to avoid costly PCB respins, and budget for an external CAN transceiver such as the MCP2551 or MCP25625 since the ECAN module only handles the protocol layer. Decouple VDD with at least 100 nF and 10 uF ceramic capacitors placed within a few millimetres of the supply pins. This page synthesizes distributor pricing, drop-in 64-pin QFN alternatives from the same PIC18 K40 family, and practical design notes that go beyond the manufacturer datasheet. According to the manufacturer datasheet, the PIC18LF66K40 is part of a broader K40 family pin-compatible roadmap, allowing firmware development to scale across 28/40/44/64/80-pin variants with shared peripheral libraries and migration paths.

詢價 聯絡我們
PIC18LF66K40-E/PT - 8-bit 64KB Flash 64-Pin TQFP MCU | Microchip
PIC18LF66K40-E/PT

PIC18LF66K40-E/PT - 8-bit 64KB Flash 64-Pin TQFP MCU | Microchip

The Microchip Technology PIC18LF66K40-E/PT is an 8-bit PIC18 XLP microcontroller with 64KB Flash, 4KB RAM and 256B EEPROM running at 64MHz, housed in a 64-pin TQFP (10x10 mm) package. It operates from 1.8V to 3.6V (LF variant) and is built on Microchip's eXtreme Low Power (XLP) technology platform, designed for battery-friendly applications. The device combines rich Core Independent Peripherals (CIPs) with high-performance analog for general-purpose embedded designs. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (RAM), non-volatile EEPROM, and a range of peripheral interfaces. Within Microchip's hierarchy, the PIC18LF66K40 belongs to the PIC18 family -> PIC XLP -> 8-bit PIC microcontrollers -> microcontrollers -> integrated circuits -> semiconductors. The "LF" prefix indicates the low-voltage (1.8V-3.6V) process variant, complementing the higher-voltage "F" PIC18F66K40 (2.3V-5.5V) version of the same die. Key differentiating features include: 64KB Flash program memory organized as 32K x 16, 4KB SRAM, 256B EEPROM, hardware CRC/SCAN memory checker, Windowed Watchdog Timer (WWDT), Complementary Waveform Generator (CWG), Zero-Cross Detect (ZCD), 10-bit ADC2 with Computation, 5-bit DAC, multiple communication peripherals (EUSART, SPI, I2C) with Peripheral Pin Select (PPS), and PWM/CCP/Capture-Compare modules. The XLP designation provides nanoWatt sleep currents below 50 nA typical in sleep mode. Architecturally, the PIC18LF66K40 employs an enhanced RISC Harvard-bus core with a hardware multiplier, 31-level stack, and 16-bit instruction width. The "-E" suffix indicates the extended (-40C to +125C) operating temperature range for industrial and automotive under-hood applications, while "/PT" denotes the TQFP-64 (10x10 mm) package style with gull-wing leads suitable for surface-mount assembly. Typical applications include IoT sensor nodes, low-power wireless modules, industrial control, automotive body electronics, home appliance control, battery-powered instrumentation, and consumer white goods. The 64-pin TQFP provides generous I/O count for richer peripheral allocation, and PPS allows flexible pin remapping. Designers should consider that the LF variant cannot operate above 3.6V on VDD - if 5V rails are present in the system, level translation is required. The XLP low-power modes require careful peripheral gating to achieve the 50 nA sleep target, and programming/debug interfaces are available via ICSP (In-Circuit Serial Programming). This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們