積體電路

子分類

📁 ADC/DAC 3,100+ 產品 📁 放大器 IC 1,900+ 產品 📁 音訊編解碼器 18 產品 📁 音訊 IC 2 產品 📁 時脈與計時 660+ 產品 📁 Comparator ICs 1 產品 📁 DSP 1,100+ 產品 📁 資料擷取 IC 2 產品 📁 數位電位器 4 產品 📁 顯示驅動器與控制器 1 產品 📁 FPGA 與 CPLD 7,300+ 產品 📁 介面 IC 3,300+ 產品 📁 LED 驅動器 1 產品 📁 邏輯 IC 460+ 產品 📁 記憶體 IC 870+ 產品 📁 微控制器 20,000+ 產品 📁 微處理器 4 產品 📁 馬達驅動器 1 產品 📁 其他 1 產品 📁 感測器與偵測器介面 1 產品 📁 特殊用途 IC 15 產品 📁 視訊 IC 14 產品

產品（39,000+)

PIC24FJ32GA002-I/SO - 16-Bit 32MHz MCU 28-SOIC | Microchip
PIC24FJ32GA002-I/SO

PIC24FJ32GA002-I/SO - 16-Bit 32MHz MCU 28-SOIC | Microchip

The Microchip Technology PIC24FJ32GA002-I/SO is a 16-bit PIC24F flash microcontroller with a 32 MHz operating frequency, 32 KB of flash memory, 8 KB of RAM, and a 28-pin SOIC package. It provides up to 16 MIPS of performance at 3.3 V and exposes 21 general-purpose I/O pins for compact embedded-control designs. The industrial-temperature suffix supports operation from -40°C to +125°C. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The PIC24F belongs to the broader embedded-controller hierarchy, where a RISC core executes firmware while timers, serial interfaces, and digital I/O connect the controller to sensors, actuators, communications links, and human-machine interfaces. This integration reduces component count while allowing the same firmware platform to support multiple embedded products. Key resources include 32 KB of flash program memory, 8 KB of data RAM, 21 I/O pins, and two I2C channels, two SPI channels, and two UART channels. The product listing also identifies five timers, one PWM unit, five PWM channels, and 16-bit PWM resolution. These peripherals allow the PIC24FJ32GA002-I/SO to handle sensor acquisition, actuator timing, serial data exchange, and general digital control without requiring several separate interface devices. The PIC24F architecture provides 16-bit instruction processing at up to 16 MIPS when operating at 3.3 V. Its Flash memory supports in-system programming, while the 8 KB RAM provides working space for variables, stack operations, buffers, and protocol state. The dual I2C, dual SPI, and dual UART resources are particularly useful when a design combines multiple sensors, mixed serial peripherals, or separate communications channels. Typical applications include industrial sensor controllers, building and environmental monitoring systems, compact motor-control modules, data-acquisition equipment, and connected low-power embedded products. The 21 available I/O pins also make the device appropriate for compact instrumentation where panel controls, status indicators, relay outputs, and serial sensors must share one controller. When designing the PCB, confirm every signal against the 28-pin pin-description table in the manufacturer datasheet. Provide clean supply decoupling at VDD, route programming and clock signals away from noisy switching nodes, and reserve MCLR for an appropriate pull-up or programming-circuit arrangement. The 28-pin SOIC footprint is not interchangeable with 28-pin SSOP or SPDIP packages without changing the land pattern. This product page combines the Microchip device description, distributor ordering information, package and memory details, interface resources, practical design guidance, and qualified drop-in comparison data to support faster engineering and sourcing decisions.

詢價 聯絡我們
PIC24FJ32GA002-I/SP - 16-bit 32KB Flash MCU 28-SPDIP | Microchip
PIC24FJ32GA002-I/SP

PIC24FJ32GA002-I/SP - 16-bit 32KB Flash MCU 28-SPDIP | Microchip

The Microchip Technology PIC24FJ32GA002-I/SP is a 16-bit PIC24F general-purpose flash microcontroller delivering 16 MIPS performance at 32 MHz, integrating 32 KB of self-programmable Flash program memory and 8 KB of SRAM in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. The die combines a modified Harvard architecture with a 17-bit x 17-bit single-cycle hardware multiplier and a 32-bit x 16-bit hardware divider, and it includes a 16-channel, 10-bit ADC capable of 500 ksps, two I2C, two SPI, and two UART peripherals plus five 16-bit timers. What is a PIC24F microcontroller? The PIC24F is Microchip's lowest-power 16-bit MCU family built on a modified Harvard architecture: program and data buses are physically separate (16-bit wide for instructions, 8 or 16-bit for data) which lets the CPU fetch an instruction and read/write a data operand in the same cycle, sustaining up to 16 MIPS at 32 MHz while a simpler von-Neumann core would stall. The 'F' suffix indicates on-chip Flash memory and the 'J' indicates the nanoWatt technology extensions used for low-power sleep and idle modes. PIC24F devices sit in Microchip's portfolio between the 8-bit PIC18 and the 32-bit PIC32, offering a C-friendly instruction set, mature toolchains (MPLAB X, XC16), and pin compatibility with many PIC18/dsPIC30 footprints for easy migration. Key features of the PIC24FJ32GA002-I/SP include 21 general-purpose I/O pins, a 2.0 V to 3.6 V single-supply operating range, an on-chip 8 MHz internal oscillator with 4x PLL and multiple postscaler options, 5 PWM channels with 16-bit resolution, two analog comparators, and a real-time clock/calendar with RTCC alarm. The CTMU (Charge Time Measurement Unit) enables capacitive touch sensing and precise time measurements, and the Parallel Master Port (PMP) supports external graphics or bus peripherals. The PIC24FJ32GA002 belongs to the PIC24FJ64GA004 family, sharing a uniform register map and peripheral set with the 64 KB Flash sister parts, so firmware written for one device generally ports to another with a single compiler switch. Program memory is organized as 11K x 24 instruction words, executed from Flash with no external memory interface required. The C-compiler-optimized instruction set, hardware stack, and 16 working registers keep interrupt latency deterministic at 5-6 cycles. Typical applications include low-power industrial sensor nodes, USB/HID human-interface devices (paired with the on-chip UART and a USB-serial bridge), capacitive touch keypads (using CTMU), battery-powered metering, and general-purpose 16-bit embedded control. The wide -40C to +125C operating temperature range also suits it to industrial and certain automotive chassis applications. A key design consideration: at 2.0 V minimum VDD, brown-out and power-on reset thresholds must be respected, and any analog reference for the ADC should be bypassed with at least 0.1 uF plus 10 uF bulk capacitance placed within 5 mm of the AVDD pin. This page synthesizes distributor pricing, drop-in alternative SPDIP MPNs, and design notes not collected in the manufacturer datasheet alone.

詢價 聯絡我們
PIC24FJ32GA002T-I/ML - 16-bit 32MHz 32KB Flash MCU | Microchip
PIC24FJ32GA002T-I/ML

PIC24FJ32GA002T-I/ML - 16-bit 32MHz 32KB Flash MCU | Microchip

The Microchip Technology PIC24FJ32GA002T-I/ML is a 16-bit microcontroller from the PIC® 24F family based on the eXtreme low power architecture, operating at up to 32 MHz (16 MIPS) and delivering 32 KB of Flash program memory and 8 KB of RAM in a 28-pin QFN (6x6 mm) package. It integrates 21 general-purpose I/O pins, multiple serial communication peripherals, and rich analog features aimed at low-power embedded designs. A PIC24F microcontroller is a 16-bit RISC MCU in Microchip's PIC family that uses a modified Harvard architecture with separate program and data buses. Within the broader taxonomy, it sits as: PIC24F MCU -> PIC24 family -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. The "FJ" prefix indicates the eXtreme low-power technology node with nanoWatt sleep modes; the "32" indicates 32 KB Flash; the "GA002" sub-family adds USB, RTCC, and enhanced peripherals; and the "T" suffix denotes Tape & Reel packaging. Key features include 32 KB (11K x 24) Flash program memory, 8 KB RAM, 21 I/O pins, a 10-bit ADC with up to 13 input channels, multiple PWM/OC outputs, two UART, two SPI, one I2C, an integrated USB 2.0 full-speed transceiver, and a Real-Time Clock/Calendar with alarm. The device operates from 2.0 V to 3.6 V and supports nanoWatt XLP sleep modes drawing less than 100 nA typical in deep sleep. Architecturally, the PIC24FJ32GA002 uses a 16-bit modified Harvard core with a 16-element x 16-bit working register array, single-cycle bit, byte, and word operations, and hardware multiply/divide. The integrated USB 2.0 full-speed transceiver eliminates external USB PHY components, while the RTCC module with separate 32 kHz oscillator domain keeps time-stamping alive during MCU sleep. Typical applications include low-power USB peripherals, sensor data loggers, handheld consumer devices, and industrial control nodes where USB connectivity and battery life are both critical. A primary design consideration is supplying the part from a clean 3.3 V rail within the 2.0 V to 3.6 V window; the internal 1.8 V LDO requires an external bulk capacitor on Vcap. Decoupling 100 nF ceramics near every VDD/VSS pair is mandatory per Microchip reference designs. This page consolidates distributor pricing, same-family drop-in alternatives, and practical engineering notes not found in a single manufacturer resource.

詢價 聯絡我們
PIC24FJ32GA002T-I/SO - 16-bit 32MHz 32KB Flash MCU | Microchip
PIC24FJ32GA002T-I/SO

PIC24FJ32GA002T-I/SO - 16-bit 32MHz 32KB Flash MCU | Microchip

The Microchip Technology PIC24FJ32GA002T-I/SO is a 16-bit PIC24F microcontroller delivering 32 MHz (16 MIPS) CPU performance from 32 KB of Flash program memory and 8 KB of RAM, in a 28-pin SOIC package. The 'T' suffix denotes tape-and-reel packaging and the 'I' grade denotes the industrial temperature range of -40 °C to +85 °C. What is a 16-bit microcontroller? A 16-bit MCU is a single-chip computer with a 16-bit data path, registers, and ALU, sitting between 8-bit MCUs (lower cost, slower math) and 32-bit MCUs (highest performance, highest cost). The PIC24F family uses a modified Harvard RISC architecture optimized for C code efficiency and deterministic interrupt response. Within Microchip's portfolio, PIC24F parts are positioned as low-power 16-bit controllers bridging PIC16/PIC18 and the higher-performance dsPIC33/PIC32 families. The 32 MHz/16 MIPS rating places PIC24FJ32GA002 in the mainstream 16-bit tier suitable for sensor conditioning, display driving, and protocol conversion. Key features of the PIC24FJ32GA002T-I/SO include a 10-channel 10-bit ADC, two I²C, two SPI, and two UART peripherals, five 16-bit timers with five PWM output channels, an RTCC alarm, and CTMU touch-support hardware. The device runs from 2.0 V to 3.6 V across industrial temperatures and is qualified to Microchip's eXtreme Low Power (XLP) specifications. The architecture combines a 17 × 17 hardware multiplier and a 32-bit ÷ 16-bit hardware divider executed in single cycles, enabling DSP-style filtering without CPU stalls. Hardware-managed context saving and a vectored interrupt controller reduce ISR latency, while the C-compiler-optimized instruction set keeps code density close to source. Internal 8 MHz and 32 kHz oscillators plus PLL flexibility let designers balance throughput against sleep current. Typical applications include low-power sensor nodes, handheld instrumentation, USB-to-UART bridges, white-goods control panels, and battery-powered IoT edge devices. The 10-bit ADC and CTMU touch channels support capacitive-button user interfaces, while dual UARTs drive multi-protocol sensor hubs. Design consideration: place a 100 nF decoupling capacitor within 5 mm of every VDD/VSS pair, plus a 10 µF bulk capacitor on the regulator rail. For noise-sensitive ADC sampling, average multiple conversions and avoid digital switching near analog pins. This page synthesizes distributor pricing, SOIC-28 drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
PIC24FJ32GA002T-I/SS - 32KB Flash 16-bit MCU | Microchip
PIC24FJ32GA002T-I/SS

PIC24FJ32GA002T-I/SS - 32KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24FJ32GA002T-I/SS is a 16-bit RISC microcontroller from the PIC24F family, featuring 32KB of FLASH program memory, 4KB of SRAM, and a 32 MHz maximum CPU speed, packaged in a 28-pin SSOP (5.30 mm body width). It is part of the eXtreme Low Power (XLP) nanoWatt technology family and integrates a 10-channel 10-bit ADC, multiple serial interfaces, and 21 general-purpose I/O pins in the 28-pin configuration. A 16-bit microcontroller is an embedded computing device that processes instructions 16 bits at a time, sitting in the hierarchy between 8-bit MCUs (such as PIC16) and 32-bit MCUs (such as PIC32). The PIC24F sub-family targets ultra-low-power applications using Microchip's nanoWatt XLP technology, which provides deep sleep modes with current consumption in the nanoamp range, making these parts well suited to battery-powered and energy-harvesting designs where every microamp counts. Key features of the PIC24FJ32GA002T-I/SS include 32 MHz operation delivering up to 16 MIPS, 32KB FLASH (11K x 24 words), 4KB SRAM, hardware multiplier for DSP-style operations, a 16-bit timer/capture/compare/PWM module, two UART modules, two SPI modules, and two I2C modules. The integrated 10-bit ADC supports up to 10 channels with 500 ksps conversion rate. The 'I' suffix indicates an industrial temperature range of -40C to +85C. The device uses a 5-stage pipeline modified Harvard architecture with a 16-bit wide instruction path and 24-bit wide data path. The 'GA002' die integrates a 3.3V core voltage regulator allowing 2.5V or 3.3V operation from a single supply. The on-chip regulator (DISVREG-controlled) supports both internal core voltage and external VDD mode for power-sensitive designs. Typical applications include portable medical devices, industrial sensor nodes, low-power IoT endpoints, consumer handheld products, and battery-backed systems where the nanoWatt XLP sleep modes extend operating life. The wide peripheral set also fits HMI panels, motor control auxiliary loops, and educational/training platforms including the Explorer 16/32 development board. AEC-Q100 qualification is available on -I automotive grade variants for vehicle body electronics. When designing with this part, choose between the internal regulator and external VDD based on power budget and noise immunity. Internal regulation simplifies the BOM; external VDD lets the user bypass the on-chip LDO for lowest noise on analog rails. The DISVREG pin must be tied correctly per datasheet section on power modes, and unused pins should be configured as outputs to minimize leakage in deep sleep.

詢價 聯絡我們
PIC24FJ32GA004-E/PT - 16-bit 32MHz 32KB Flash MCU | Microchip
PIC24FJ32GA004-E/PT

PIC24FJ32GA004-E/PT - 16-bit 32MHz 32KB Flash MCU | Microchip

The Microchip Technology PIC24FJ32GA004-E/PT is a 16-bit PIC24F microcontroller featuring 32KB of Flash program memory and 8KB of RAM, operating at up to 32 MHz (16 MIPS) in a 44-pin TQFP (PT) package. It is built on Microchip's nanoWatt XLP eXtreme Low Power technology and is qualified for the extended temperature range of -40C to +125C. The part belongs to the PIC24FJ64GA004 family and shares pin-for-pin compatibility with the 64KB Flash sibling PIC24FJ64GA004-E/PT. A PIC24F microcontroller is a 16-bit modified Harvard architecture MCU from Microchip's PIC24 family, designed for general-purpose embedded control. PIC24F devices sit between the 8-bit PIC18 and the 32-bit PIC32 in Microchip's portfolio, offering a balance of computational throughput, peripheral integration, and ultra-low power consumption. The PIC24F family is widely adopted in consumer, industrial, and medical applications that require DSP-class math (single-cycle 17x17 hardware multiply, 32/16 hardware divide) but cannot justify a PIC32 or ARM Cortex-M device. Key features of the PIC24FJ32GA004-E/PT include a 16-channel 10-bit ADC, multiple communication peripherals (UART, SPI, I2C), five 16-bit timers, four PWM output channels, and a real-time clock calendar. The internal 8 MHz oscillator with 4x PLL delivers system clock flexibility without external crystals, and the device operates from 2.0V to 3.6V. The CTMU (Charge Time Measurement Unit) enables touch sensing and precise time-of-flight measurements. Hardware CRC and a configurable vector interrupt controller reduce software overhead. Typical applications include low-power sensor nodes, USB device controllers, industrial HMI panels, battery-powered medical devices, and automotive body/comfort electronics. The PIC24FJ32GA004-E/PT's nanoWatt XLP technology provides sleep currents below 1 uA in Deep Sleep mode, which is critical for energy-harvesting and battery-backed applications. When designing with this device, allocate 2.0V to 3.6V to VDD, place decoupling capacitors adjacent to all power pins, and follow Microchip's recommended ICSP programming connections. Programming is supported by MPLAB X IDE and the MPLAB ICD 3 / PICkit 3 debuggers.

詢價 聯絡我們
PIC24FJ32GA004-I/PT - 16-Bit 32MHz 32KB Flash MCU | Microchip
PIC24FJ32GA004-I/PT

PIC24FJ32GA004-I/PT - 16-Bit 32MHz 32KB Flash MCU | Microchip

The Microchip Technology PIC24FJ32GA004-I/PT is a 16-bit PIC24F microcontroller featuring 32 KB Flash program memory, 8 KB SRAM, and a 32 MHz (16 MIPS) CPU core housed in a 44-pin TQFP (10x10 mm) package. It operates from 2.0V to 3.6V with integrated eXtreme Low Power (XLP) technology, and provides 35 digital I/O pins, a 10-bit ADC with 13 input channels, five timers/counters, two UART modules, two SPI peripherals, and two I2C peripherals. A microcontroller (MCU) is an integrated circuit containing a CPU core, non-volatile program memory (typically Flash), volatile working memory (SRAM), and a configurable set of peripherals such as ADCs, timers, and serial interfaces. PIC24F devices sit within Microchip's broader taxonomy of MCU -> 16-bit MCU -> PIC24 family -> PIC24F sub-family -> eXtreme Low Power tier. These 16-bit devices typically replace 8-bit PIC16/PIC18 designs when an application requires more computational headroom, larger addressable memory, or richer peripherals, while remaining easier than 32-bit ARM Cortex-M designs for simple control loops. Key differentiating features include a 16 MIPS execution rate from the modified Harvard RISC core, hardware RTCC with calendar mode, a 16-bit parallel master port (PMP) on selected variants, and a Charge Time Measurement Unit (CTMU) for touch sensing and precise time measurement. Boundary-scan (JTAG) support simplifies in-system programming and on-board debug through the ICSP interface. Architecturally, the PIC24FJ32GA004 uses a 16-bit modified-Harvard core with a 24-bit instruction word, enabling single-cycle most instructions and deterministic interrupt latency. The XLP technology integrates multiple power-saving modes (Sleep, Idle, Deep Sleep) and a wide operating voltage range that supports battery-backed and energy-harvesting designs. The device includes a 10-bit successive-approximation ADC and hardware CRC, which together reduce firmware overhead in sensor-interface and communications-handling tasks. Typical applications span industrial sensing nodes, low-power remote control panels, handheld medical devices, USB-to-UART bridges, HVAC thermostats, sensor hubs, and portable consumer electronics. The wide 2.0V to 3.6V supply range also accommodates 2xAA and coin-cell powered designs where battery voltage varies over discharge. When designing with this part, allocate the ICSP pins (PGECx/PGEDx) and ensure MCLR is properly biased for in-circuit programming. Choose the appropriate internal oscillator mode (Fast RC or 32.768 kHz) early in the design to balance power consumption against timing accuracy; the PLL configuration can then be selected to reach 32 MHz operation. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet, helping procurement and firmware teams evaluate the PIC24FJ32GA004-I/PT for both new designs and legacy replacements.

詢價 聯絡我們
PIC24FJ32GA004T-I/PT - 16-bit MCU 32KB Flash 44-TQFP | Microchip
PIC24FJ32GA004T-I/PT

PIC24FJ32GA004T-I/PT - 16-bit MCU 32KB Flash 44-TQFP | Microchip

The Microchip Technology PIC24FJ32GA004T-I/PT is a 16-bit microcontroller from the PIC24F family, featuring 32KB of Flash program memory, 8KB of RAM, and a 32MHz CPU speed (16 MIPS) in a 44-pin TQFP (10x10 mm) package. It offers 35 I/O pins and supports both 2.5V and 3.3V operation, making it suitable for low-power embedded designs. The 'T' suffix indicates tape and reel packaging for high-volume assembly, while the 'I' denotes the industrial temperature grade of -40C to +85C. A microcontroller (MCU) is an integrated circuit containing a processor core, memory, and programmable peripherals designed to execute firmware in embedded systems. The PIC24F family uses Microchip's modified Harvard architecture with a 16-bit data path and 24-bit instruction word, providing higher code density and faster arithmetic than 8-bit MCUs while retaining the deterministic interrupt model PIC developers rely on. This places the PIC24FJ32GA004T-I/PT in the power management and embedded control tier between 8-bit PIC16/PIC18 devices and 32-bit PIC32 parts. Key features include hardware multiply (17x17 single-cycle) and divide (32/16-bit) units, a 10-bit ADC with up to 16 channels, multiple communication peripherals (UART, SPI, I2C), and Microchip's eXtreme Low Power (XLP) technology for battery-driven applications. The device integrates a real-time clock and calendar (RTCC) module, five 16-bit timers, and a charge time measurement unit (CTMU) for capacitive touch sensing. These features accelerate firmware development while reducing external component count. The 32MHz oscillator (8MHz internal RC with 4x PLL) yields 16 MIPS throughput, enabling responsive control loops and efficient signal processing. The internal RC oscillator reduces BOM cost by eliminating external crystals in cost-sensitive designs. The 32KB Flash (11K x 24 words) and 8KB RAM provide ample space for application code, protocol stacks, and data buffers in IoT, sensor, and HMI products. Typical applications include industrial control modules, low-power IoT sensor nodes, USB device firmware (with on-chip USB 2.0 full-speed transceiver), consumer white goods, motor control (with PWM and QEI peripherals), and graphical user interfaces via the integrated Parallel Master Port (PMP). The XLP features also suit battery-powered data loggers and wearable health monitors. When designing with this device, evaluate the 2.5V/3.3V supply range against your analog rail requirements. Plan for the 44-pin TQFP PCB footprint early in the layout to leave room for decoupling capacitors and trace routing. The industrial temperature grade ensures operation in factory automation, outdoor enclosures, and automotive under-hood environments.

詢價 聯絡我們
PIC24FJ32GA102-I/ML - 32KB Flash 16-bit MCU | Microchip 28-QFN
PIC24FJ32GA102-I/ML

PIC24FJ32GA102-I/ML - 32KB Flash 16-bit MCU | Microchip 28-QFN

The Microchip Technology PIC24FJ32GA102-I/ML is a 16-bit RISC microcontroller built on the PIC24F core, delivering 16 MIPS performance at 32 MHz and integrating 32 KB of Flash program memory with 8 KB of SRAM in a 28-pin QFN (6x6 mm) package. The device belongs to the PIC24F family, the eXtreme Low Power (XLP) series, and combines a 16-bit modified-Harvard CPU with a wide peripheral set including a 10-channel, 10-bit ADC, five PWM channels, and hardware support for I2C, IrDA, SPI, and UART/USART connectivity. Industrial temperature grade (-40C to +85C) parts ship with the -I suffix while the -ML package code indicates the 28-lead QFN with an exposed thermal pad. A PIC microcontroller is a compact programmable processor that integrates CPU, non-volatile Flash, working RAM, and digital/analog peripherals onto a single silicon die. The 16-bit PIC24F line sits between the 8-bit PIC18 and 32-bit PIC32 families, occupying the low-power and signal-conditioning niche. PIC24F XLP parts explicitly target battery-friendly designs through nanoWatt XLP technology that enables deep sleep currents in the nanoamp range while preserving full register retention and rapid wake-up. Key features of the PIC24FJ32GA102-I/ML include 21 general-purpose I/O, two analog comparators with programmable reference, hardware Real-Time Clock and Calendar (RTCC) with timestamp capture, four 16-bit timers, and four Input Capture/Output Compare modules. Brown-out Reset, Low-Voltage Detect, Power-on Reset, and a Watchdog Timer with on-chip low-power RC oscillator provide multi-layer system safety. The integrated USB 2.0 full-speed (12 Mbps) peripheral is absent on the -102 variant; it is present on the larger -104 and -106 derivatives of the family. The 28-QFN package exposes a thermal pad for low thermal resistance, helping dissipate heat in enclosed industrial enclosures. The PIC24FJ32GA102 architecture uses a 16-bit data path with 24-bit instructions and a hardware multiplier that can issue a 16x16 multiplication in a single cycle, accelerating DSP-style math operations such as FIR filters or sensor fusion routines. The internal 8 MHz Fast RC oscillator can be combined with the 32 kHz low-power oscillator through the Fail-Safe Clock Monitor for robust operation across -40C to +125C industrial environments. Typical applications include low-power IoT sensor nodes, USB human-interface devices, industrial control panels, building automation, portable medical instruments, and capacitive-touch human interfaces. Designers pick this part for sleep currents measured in nanoamps, sufficient Flash for protocol stacks such as USB HID or Modbus, and a 16-bit architecture that simplifies PID loops, RMS calculations, and motor control timing. When designing with this part, place the decoupling capacitor (0.1 uF + 1 uF) within 3 mm of VDD/VSS, expose the QFN thermal pad to a 6x6 mm copper pour with at least eight thermal vias, and configure the Configuration bits in code to enable low-voltage programming and the requested oscillator mode. Avoid driving I/O above VDD + 0.3 V to prevent latch-up. This page synthesizes distributor pricing, drop-in QFN-28 alternatives, recommended companion parts, and practical design notes that the bare Microchip datasheet does not aggregate.

詢價 聯絡我們
PIC24FJ32GA102-I/SO - 16-bit 32MHz 32KB Flash MCU | Microchip
PIC24FJ32GA102-I/SO

PIC24FJ32GA102-I/SO - 16-bit 32MHz 32KB Flash MCU | Microchip

The Microchip Technology PIC24FJ32GA102-I/SO is a 16-bit PIC24F microcontroller featuring 32KB of Flash program memory, 8KB of RAM, and a 32MHz (16 MIPS) CPU core, housed in a 28-pin SOIC package. It belongs to the PIC24FJ32GA1xx family of low-power 16-bit microcontrollers with nanoWatt XLP technology. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and programmable peripherals. The PIC24F family is positioned in Microchip's 16-bit portfolio above 8-bit PIC MCUs and below dsPIC and PIC32 devices, offering a balance of low power consumption, computational throughput, and peripheral integration for cost-sensitive embedded designs. Key features of the PIC24FJ32GA102 include a modified Harvard 16-bit architecture with a 16x16 hardware multiplier, integrated 10-bit ADC with up to 10 channels, multiple 16-bit timers, UART/SPI/I2C peripherals, and nanoWatt XLP power-saving modes. The device operates from a 2.0V to 3.6V supply, drawing as little as 250nA in Sleep mode, making it well suited to battery-powered applications. Typical applications include portable medical devices, low-power sensor nodes, industrial control, USB peripherals (with external transceiver), and consumer electronics. The 32KB Flash and 8KB RAM support mid-sized RTOS or bare-metal applications with GUI, communication stacks, or signal processing. Designers should evaluate clock configuration, oscillator stability, and decoupling strategy early. The 28-pin SOIC footprint exposes most peripherals while leaving room for analog and digital separation on the PCB. This page synthesizes verified distributor pricing, drop-in alternatives, and design notes for the PIC24FJ32GA102-I/SO.

詢價 聯絡我們
PIC24FJ32GA102-I/SS - 32KB Flash 16-bit XLP MCU | Microchip
PIC24FJ32GA102-I/SS

PIC24FJ32GA102-I/SS - 32KB Flash 16-bit XLP MCU | Microchip

The Microchip Technology PIC24FJ32GA102-I/SS is a 16-bit PIC24F microcontroller from the nanoWatt XLP ultra-low-power family, featuring 32 KB of Flash program memory, 8 KB of RAM, and a maximum CPU speed of 32 MHz (16 MIPS) in a 28-pin SSOP package. It integrates advanced peripherals including a 10-bit 1.1 Msps A/D converter, multiple UART/SPI/I2C interfaces, and 21 general-purpose I/O pins, all while drawing microamp-level sleep currents for battery-powered designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals into one IC. The PIC24F family sits in the 16-bit tier of Microchip's product hierarchy: 8-bit PIC10/12/16/18 -> 16-bit PIC24F/dsPIC33 -> 32-bit PIC32. Within the PIC24F tier, the nanoWatt XLP variants add specialised sleep modes that allow standby currents below 1 uA, enabling years of operation from coin cells. The PIC24FJ32GA102-I/SS targets cost-sensitive applications that need more performance and memory than an 8-bit PIC but do not justify a 32-bit PIC32. Key features of the PIC24FJ32GA102-I/SS include 32 KB Flash (11K x 24 words), 8 KB SRAM, 16 MIPS performance from a 32 MHz internal oscillator, 21 digital I/O pins with peripheral pin select, an integrated 10-bit ADC with up to 13 input channels and 1.1 Msps sampling rate, four 16-bit timers, two UART modules, two SPI modules, and two I2C modules. The device operates from 2.0 V to 3.6 V and is rated for industrial -40C to +85C ambient temperature. The 28-SSOP package offers a narrow-body 5.30 mm footprint suitable for compact boards. The PIC24FJ32GA102-I/SS uses Microchip's modified Harvard architecture with a 16-bit datapath and 24-bit instruction word, allowing single-cycle fractional multiplication and deterministic interrupt latency. Integrated nanoWatt XLP technology provides multiple deep-sleep modes (Sleep, Deep Sleep, RTC mode) with current as low as 20 nA in Deep Sleep with RTCC, making the part a strong fit for always-on sensor nodes and energy-harvesting systems. Typical applications include portable medical devices, IoT sensor nodes, consumer electronics (remote controls, toys, wearables), industrial sensor interfaces, low-power wireless platforms, and battery-backed data loggers. The combination of generous SRAM and 21 I/O also supports human-machine interface (HMI) front panels and small graphical displays. When designing with the PIC24FJ32GA102-I/SS, ensure the supply rail stays between 2.0 V and 3.6 V and that decoupling capacitors (typically 100 nF plus 10 uF bulk) are placed within 5 mm of the AVDD/VDD pins. The device supports in-circuit serial programming (ICSP) via PGECx/PGEDx pin pairs - use the same pair for both signals to avoid programming failures. For low-power operation, switch off unused peripherals in the PMD register and use Deep Sleep mode whenever the CPU is idle. This page combines verified distributor pricing, structured same-brand drop-in alternatives drawn from Microchip's PIC24F family, and engineering design notes to help you select, source, and integrate the PIC24FJ32GA102-I/SS with confidence.

詢價 聯絡我們
PIC24FJ32GA102T-I/SO - 32KB Flash XLP 16-bit MCU | Microchip
PIC24FJ32GA102T-I/SO

PIC24FJ32GA102T-I/SO - 32KB Flash XLP 16-bit MCU | Microchip

The Microchip Technology PIC24FJ32GA102T-I/SO is a 16-bit PIC24F microcontroller featuring 32 KB (11K x 24) of Flash program memory, 8 KB of SRAM, and a maximum CPU speed of 32 MHz (16 MIPS), housed in a 28-pin SOIC (SO) package supplied in tape-and-reel form. Part of the PIC24FJ32GA102 family and the PIC® XLP™ 24F series, it combines the nanoWatt XLP™ extreme low-power technology with peripheral-rich integration, including a 10-bit ADC, multiple UART/SPI/I2C interfaces, and configurable I/O. The 28-SOIC (0.295" / 7.50 mm width) footprint enables through-hole-free board assembly while remaining friendly to hand-solder rework. What is a PIC24F microcontroller? The PIC24F is a 16-bit modified Harvard MCU family from Microchip, sitting between the 8-bit PIC16/PIC18 architectures and the 32-bit PIC32 families. PIC24F devices execute 16 MIPS at 32 MHz while retaining a familiar PIC instruction set, mapping cleanly into the broader microcontrollers > integrated circuits taxonomy. nanoWatt XLP™ technology pushes quiescent current down to roughly 20 nA in deep sleep, making the family a staple for battery-powered designs where every microamp matters. Key features include: 32 KB Flash / 8 KB RAM for non-trivial control firmware, a 10-bit A/D converter with up to 10 channels at 500 ksps, two UART, three SPI, and two I2C interfaces, plus 5.32-bit timers/counters. The 28-pin SOIC package offers 21 general-purpose I/O lines and a wide operating voltage range of 2.0V to 3.6V. The T-suffix variant denotes tape-and-reel packaging for high-volume pick-and-place assembly, while the industrial -40°C to +85°C temperature grade suits outdoor and industrial enclosures. Architecturally, the PIC24FJ32GA102 uses a 16-bit modified Harvard core with separate program (Flash) and data (SRAM) buses, allowing instruction fetch and operand read in the same cycle. Peripheral pin select (PPS) on most PIC24F variants lets designers remap digital peripherals to multiple I/O pins, simplifying PCB routing. The 10-bit ADC uses a successive-approximation architecture with selectable acquisition time, and the on-chip 32 kHz low-power RC oscillator plus the 8 MHz system oscillator support flexible clock trees that are critical for XLP sleep current minimization. Typical applications include portable consumer electronics, sensor hubs, low-power wireless gateways, building automation, and USB/HID human-interface devices where the PIC24FJ32GA102's 32 KB Flash comfortably fits USB stacks and protocol firmware. It is also widely used as the main controller on Microchip's Explorer 16/32 development board via processor plug-in modules, demonstrating proven reference design support across PIC24F, dsPIC®, and PIC32 platforms. When designing with this device, verify that the chosen 28-SOIC PCB footprint matches the JEDEC MS-013 standard and that the supply decoupling scheme (typically a 100 nF plus 10 µF bulk cap within 5 mm of VDD) is implemented. Engineers evaluating alternatives should weigh Flash/RAM needs and I/O count: smaller applications may use PIC24FJ16 series, while larger ones step up to PIC24FJ64 or PIC24FJ128 families. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
PIC24FJ32GA104 - 16-bit MCU, 32KB Flash, 44-TQFP | Microchip
PIC24FJ32GA104

PIC24FJ32GA104 - 16-bit MCU, 32KB Flash, 44-TQFP | Microchip

The Microchip PIC24FJ32GA104 is a 16-bit low-power microcontroller from the PIC24F family featuring 32 KB of Flash program memory, 8 KB of RAM, and a 32 MHz maximum CPU clock delivering up to 16 MIPS performance. The device is housed in a 44-pin TQFP package (10x10 mm) and is targeted at general-purpose embedded applications requiring strong peripheral integration with low power consumption. According to the Microchip datasheet, the part includes 16-bit x 16-bit hardware multiply and 32-bit / 16-bit hardware divide engines in a single cycle, plus a C-compiler-optimized instruction set that simplifies code generation. A microcontroller is a self-contained computing subsystem that integrates a CPU, non-volatile program memory, working RAM, and a rich mix of peripherals (timers, communication ports, ADCs, comparators, I/O) into a single IC. The PIC24FJ family sits within the broader hierarchy of microcontrollers -> 16-bit microcontrollers -> low-power microcontrollers -> nanoWatt XLP devices, manufactured using CMOS process technology. It belongs to the wider Microchip 8/16/32-bit MCU ecosystem (PIC, PIC24, dsPIC, PIC32) and ultimately falls under embedded processing -> semiconductors. The ultra-low-power nanoWatt XLP technology extends battery life by offering multiple sleep modes, deep sleep currents in the microamp range, and peripheral modules that operate independently of the CPU. Key specifications include 32 KB Flash (11K x 24 words), 8 KB RAM, hardware single-cycle multiply and divide, an internal 8 MHz oscillator with PLL support, up to 16 MIPS throughput, and a peripheral lineup that typically includes multiple UART/SPI/I2C modules, 10-bit ADC, comparators, RTCC, and a charge time measurement unit (CTMU). Five 16-bit timers/counters and a wide operating voltage range of 2.0 V to 3.6 V with -40C to +85C industrial temperature range round out the feature set. The architecture is a modified Harvard design with separate program and data paths, predictable interrupt response, and a fast context switch designed for deterministic real-time control. On-chip debugging via two hardware breakpoints and an ICD interface reduces development cost, while the integrated peripherals remove the need for many external components. Typical applications include portable medical devices, sensor hubs, industrial control nodes, low-cost HMI panels, and battery-powered IoT edge nodes. The combination of nanoWatt XLP power savings, deterministic 16-bit performance, and standard 44-TQFP footprint makes it well suited to designs migrating from older 8-bit PIC microcontrollers that have outgrown their memory and peripheral budgets. When designing with this part, ensure all VDD/VSS pairs are connected (a floating rail can prevent programming via ICSP), place the 0.1 uF decoupling capacitor within a few millimeters of each VDD pin, and reserve a 4.7 kohm pull-up on MCLR for reliable reset behavior. RTCC operation with a 32.768 kHz crystal requires selecting the appropriate secondary oscillator configuration in the configuration bits. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving purchasing and engineering teams a complete working reference for the PIC24FJ32GA104 in a 44-TQFP package.

詢價 聯絡我們
PIC24FJ32GA104-I/ML - 16-Bit 32KB Flash MCU, 44-QFN | Microchip
PIC24FJ32GA104-I/ML

PIC24FJ32GA104-I/ML - 16-Bit 32KB Flash MCU, 44-QFN | Microchip

The Microchip PIC24FJ32GA104-I/ML is a 16-bit PIC24F microcontroller featuring 32 KB of Flash program memory (11K x 24 words), 8 KB RAM, and a maximum CPU speed of 32 MHz (16 MIPS), housed in a 44-pin QFN package (8x8 mm) with an exposed thermal pad. It belongs to the PIC24FJ64GA104 family and carries the nanoWatt XLP (eXtreme Low Power) branding for ultra-low-power applications. A 16-bit microcontroller (MCU) is a single-chip computer with a 16-bit data path, instruction word, and ALU, sitting in the hierarchy: microcontroller -> embedded controller -> semiconductor. The PIC24F family uses a Modified Harvard architecture with 16-bit instructions and 24-bit instruction words, optimized for C compiler efficiency and signal processing. This positions it between 8-bit MCUs (PIC16, AVR) and 32-bit MCUs (PIC32, ARM Cortex-M), offering a balance of compute throughput, peripheral integration, and low power consumption. Key features include up to 16 MIPS performance, single-cycle execution, 16 x 16 hardware multiply, 32-bit / 16-bit hardware divider, a C-compiler-optimized instruction set, and the nanoWatt XLP sleep modes that allow standby currents in the microamp range. The 44-QFN package integrates peripherals such as multiple UART/SPI/I2C interfaces, 12-bit ADC, real-time clock, and up to 33 digital I/O pins. Typical applications include portable medical devices, low-power IoT sensor nodes, industrial control with LCD display, battery-powered data loggers, and consumer products requiring extended battery life. The wide 2.0V to 3.6V operating range supports direct Li-ion battery connection with on-chip regulation. When designing with this part, allocate PCB thermal relief to the exposed pad (EP) on the 44-QFN for proper ground connectivity and heat dissipation. Use Microchip's MPLAB X IDE with the XC16 compiler and consider the Explorer 16/32 development board for prototyping with compatible Processor Plug-In Modules. This page synthesizes distributor pricing, MPLAB tool compatibility, drop-in alternative PIC24FJ parts, and practical PCB layout notes not found in the standalone datasheet.

詢價 聯絡我們
PIC24FJ32GA104-I/PT - 32KB Flash 16-bit MCU | Microchip TQFP-44
PIC24FJ32GA104-I/PT

PIC24FJ32GA104-I/PT - 32KB Flash 16-bit MCU | Microchip TQFP-44

The Microchip Technology PIC24FJ32GA104-I/PT is a 16-bit general-purpose Flash microcontroller built on the nanoWatt XLP (eXtreme Low Power) PIC24F core, delivering up to 16 MIPS at 32 MHz with 32 KB of Flash program memory (11K x 24 words) and 8 KB of SRAM, housed in a 44-pin TQFP (10x10 mm) package rated for the -40C to +85C industrial range. A PIC24F microcontroller is a 16-bit modified-Harvard RISC MCU that bridges 8-bit PIC simplicity with dsPIC/DSP-class performance. In the broader taxonomy it sits at: MCU -> 16-bit microcontroller -> embedded controller -> digital IC. PIC24F devices are characterized by nanoWatt XLP sleep modes (sub-microamp idle current), rich peripheral integration, and Microchip's free MPLAB X IDE plus the XC16 toolchain, making them a popular choice for battery-powered and cost-sensitive embedded designs. Key features include a 16 x 16 hardware multiplier and 32 / 16 hardware divider with single-cycle execution, a 10-bit ADC with up to 13 input channels (depending on package variant), two analog comparators, four 16-bit timers, two UART, two SPI, and two I2C peripherals. The wide 2.0 V to 3.6 V operating range plus nanoWatt XLP idle/sleep currents below 1 uA make the part suitable for always-on sensor nodes and energy-harvesting applications. The architecture uses a 24-bit instruction word with separate 16-bit data paths, allowing single-cycle atomic reads and writes to 16-bit peripherals. A configurable 8 MHz internal FRC oscillator eliminates the need for an external crystal on cost-optimized boards, while PLL multiplication can step the system clock up to 32 MHz. The CTMU peripheral enables capacitive-touch sensing, time-of-flight measurement, and precision pulse generation without external analog ICs. Typical applications include handheld consumer devices such as blood-pressure monitors, glucose meters, and remote controls, portable data loggers, smart sensors with on-chip capacitive touch, low-cost motor-control front ends, and industrial HMI panels. The combination of large memory, RTCC, USB-less general-purpose peripherals, and a 35-I/O count makes the device flexible for both stand-alone and master/slave architectures. When designing with this device, dedicate 100 nF decoupling on each VDD/VCAP pin pair and follow the datasheet's PCB layout guideline for the analog AVDD/AVSS rails to preserve ADC accuracy. Avoid using ADC channels shared with digital I/O during simultaneous switching events without proper isolation. This page synthesizes distributor pricing, in-package drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet. All specifications are anchored to the official Microchip datasheet (PIC24FJ64GA104 Family) and cross-verified with current distributor listings as of 2026-10-09.

詢價 聯絡我們
PIC24FJ32GA104T-I/ML - 16-bit 32KB Flash MCU | Microchip
PIC24FJ32GA104T-I/ML

PIC24FJ32GA104T-I/ML - 16-bit 32KB Flash MCU | Microchip

The Microchip Technology PIC24FJ32GA104T-I/ML is a 16-bit microcontroller from the PIC® XLP™ 24F family featuring 32KB Flash program memory and 8KB RAM, operating at up to 32 MHz (16 MIPS) in a 44-pin QFN (8x8 mm) package with exposed pad. It integrates a nanoWatt XLP power-management architecture designed for ultra-low-power applications requiring extended battery life. A 16-bit microcontroller (MCU) is a microprocessor that processes data and instructions 16 bits at a time, sitting between 8-bit MCUs and 32-bit MCUs in the embedded hierarchy. 16-bit -> microcontroller -> embedded processor -> semiconductor. The PIC24FJ family specifically targets low-power, mixed-signal applications where 8-bit MCUs lack the throughput but 32-bit MCUs over-consume power, making PIC24F parts a sweet spot for portable medical, sensor, and human-interface designs. Key features include 32 KB Flash (11K x 24 organization), 8 KB SRAM, hardware 16x16 multiply and 32/16 divide in single-cycle execution, and a C-compiler-optimized instruction set. Peripherals span up to 5 timers, 3 UART, 3 SPI, 2 I2C, 10-bit ADC up to 500 ksps with up to 13 input channels, and a Real-Time Clock Calendar (RTCC). The nanoWatt XLP modes offer deep sleep currents below 1 µA (per datasheet characterization), enabling years of operation from coin-cell or lithium batteries. Architecturally, the device uses a modified Harvard bus with separate program and data paths, supporting linear program memory up to 32 KB and linear data memory up to 8 KB. Five I/O ports (RA/RB/RC/RD/RG) provide up to 35 digital I/O pins with individual bit-manipulation control via Peripheral Pin Select (PPS). The 2.5V-3.6V single-supply range and -40°C to +85°C industrial temperature support enable deployment in consumer, industrial, and portable medical end products. Typical applications include handheld medical instruments (glucometers, pulse oximeters), IoT sensor nodes, home automation controllers, HVAC thermostats, and consumer electronics with graphical LCD or capacitive touch interfaces. The PIC24FJ32GA104 family also serves as a low-power companion MCU in multi-processor designs where a higher-performance host offloads always-on sensor and housekeeping tasks. When designing with this MCU, allocate the PPS mapping carefully because each peripheral signal can be routed to one of several pins; conflicts between UART, SPI, and I2C assignments must be resolved at compile time. The QFN-44 package benefits from a central thermal pad that should be soldered to a ground pour for both electrical ground and thermal dissipation. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC24FJ family, and practical design notes that complement - but do not replace - the manufacturer datasheet.

詢價 聯絡我們
PIC24FJ32GB002-I/SO - 32MHz 32KB Flash USB MCU | Microchip
PIC24FJ32GB002-I/SO

PIC24FJ32GB002-I/SO - 32MHz 32KB Flash USB MCU | Microchip

The Microchip Technology PIC24FJ32GB002-I/SO is a low-power 16-bit PIC24 microcontroller with a 32 MHz operating frequency, 32 KB of flash memory, 8 KB of RAM, and full-speed USB in a 28-pin SOIC package. It combines a 16 MIPS instruction throughput with integrated USB connectivity and advanced peripherals for compact embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The PIC24FJ32GB002 belongs to the PIC24 family of 16-bit RISC microcontrollers and the broader embedded-control hierarchy of microcontrollers, embedded processors, and semiconductor devices. Its XLP low-power architecture is intended for applications that balance responsive control, USB connectivity, and reduced energy use. Principal features include 32 KB of program flash organized as 11K by 24 words, 8 KB of SRAM, a 16-bit architecture, and a maximum clock frequency of 32 MHz. Full-speed USB support permits direct peripheral connectivity and communication with USB hosts. The -I/SO ordering designation identifies the industrial-temperature, 28-pin SOIC configuration. The PIC24FJ32GB002-I/SO integrates advanced peripherals intended to reduce external component requirements in embedded products. USB device connectivity, serial interfaces, timers, and other control resources allow designers to consolidate functions that might otherwise require separate devices. Its 16 MIPS processing capability provides deterministic control performance for protocol handling, signal monitoring, and user-interface management. Typical uses include USB-connected data acquisition modules, compact industrial controllers, programmable instrument interfaces, building-control nodes, and low-power embedded peripherals. A USB device implementation can use the controller for enumeration and data exchange while general-purpose peripherals manage sensors, indicators, and local control functions. PCB design should preserve the manufacturer's recommended decoupling and programming access. Place the required input and output capacitors close to their associated supply pins, route USB D+ and D- as a controlled differential pair, and maintain accessible programming and debug connections. Confirm the exact pin names, voltage limits, and decoupling values against the Microchip datasheet before fabrication. This product page consolidates manufacturer specifications, verified sourcing information, same-footprint alternatives, and practical design guidance. It also distinguishes genuine direct replacements from package or temperature-ordering variants that require explicit engineering review before substitution.

詢價 聯絡我們
PIC24FJ32GB002-I/SP - 32KB Flash USB MCU 28-SPDIP | Microchip
PIC24FJ32GB002-I/SP

PIC24FJ32GB002-I/SP - 32KB Flash USB MCU 28-SPDIP | Microchip

The Microchip PIC24FJ32GB002-I/SP is a 16-bit PIC microcontroller from the PIC24F XLP family, integrating Full-Speed USB 2.0 on-chip with 32 KB of Flash program memory and 8 KB of RAM, housed in a 28-pin SPDIP (SP) through-hole package. It runs at up to 32 MHz (16 MIPS) from a 2.0-3.5V supply, making it one of the lowest-power USB-capable 16-bit MCUs in the Microchip portfolio. The part suffix /SP designates the 28-SPDIP industrial temperature range (-40C to +85C). A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, and integrated peripherals. The PIC24F family sits in the 16-bit tier of Microchip's product hierarchy: 8-bit PIC10/12/16 -> 16-bit PIC24F/dsPIC -> 32-bit PIC32. Within PIC24F, the 'J' family is the ultra-low-power XLP variant while 'GB' indicates Full-Speed USB 2.0 device support - a unique combination for battery-powered USB peripherals. Key features include 32 KB self-programmable Flash (11K x 24 words), 8 KB RAM, a 10-bit ADC up to 500 ksps with up to 9 analog channels, three 16-bit timers, two UART modules, two SPI modules, two I2C modules, and a CTMU for capacitive touch sensing. The integrated USB 2.0 Full-Speed (12 Mbps) device controller with an internal transceiver eliminates external USB PHY components, lowering BOM cost for HID, CDC, and custom-class USB devices. The architecture uses a Harvard RISC core with 16-bit instructions and a modified Harvard memory map, achieving 16 MIPS throughput. The nanoWatt XLP technology delivers sleep currents below 50 nA typical, and the part supports multiple low-power modes (Sleep, Idle, Deep Sleep) with multiple clock sources including the on-chip 8 MHz FRC and the 31 kHz LPRC oscillator. Typical applications include USB Human Interface Devices (HIDs) such as keyboards and mice, USB-to-UART bridges, USB data loggers, battery-powered USB medical sensors, and capacitive touch user interfaces. The 28-SPDIP package is favored for hobby, educational, and through-hole prototyping designs where socketed or hand-soldered replacement is desired. When designing with this part, ensure the USB VBUS pin is properly decoupled and that the internal 3.3V regulator is bypassed per datasheet. The 28-SPDIP form factor requires through-hole pads - for SMD designs the SOIC-28 or QFN variants of the same die are available in the family. The integrated USB transceiver reduces code complexity but the firmware stack (Microchip Harmony or MLA) should still be used for enumeration.

詢價 聯絡我們
PIC24FJ32GB002-I/SS - 16-bit 32MHz 32KB Flash USB MCU | Microchip
PIC24FJ32GB002-I/SS

PIC24FJ32GB002-I/SS - 16-bit 32MHz 32KB Flash USB MCU | Microchip

The Microchip Technology PIC24FJ32GB002-I/SS is a 16-bit PIC® XLP™ 24F microcontroller IC running at up to 32MHz (16 MIPS), integrating 32KB (11K x 24) of Flash program memory, 8KB of RAM, and a Full-Speed USB 2.0 On-The-Go (OTG) transceiver, packaged in a 28-pin SSOP (5.30mm width, 0.209in). According to the Microchip product page, this device belongs to the PIC24FJ64GB004 family and targets low-power, USB-enabled embedded applications. A 16-bit microcontroller (MCU) is a programmable processor with a 16-bit data path, balanced register width, and richer peripherals than 8-bit MCUs while remaining simpler and lower-cost than 32-bit ARM Cortex parts. Within Microchip's taxonomy, the PIC24F sits between PIC16/PIC18 8-bit parts and dsPIC/PIC32 32-bit parts, offering deterministic interrupt handling and DSP-friendly instructions for embedded signal processing. The 'FJ' prefix denotes the nanoWatt XLP extreme-low-power family, while the 'GB002' suffix marks this specific die with USB OTG and 32KB Flash. This product type falls under the hypernym hierarchy: microcontroller -> MCU -> embedded processor -> semiconductor IC. Key differentiating features include the integrated USB 2.0 Full-Speed OTG controller, nanoWatt XLP technology for sub-µA sleep currents, 16-channel 10-bit ADC, multiple serial interfaces (UART, SPI, I2C), and a real-time clock-calendar (RTCC). The 28-pin SSOP package provides compact surface-mount integration while exposing enough I/O for human-interface and sensor-hub designs. Architecturally, the PIC24FJ32GB002 uses a modified Harvard architecture with separate program and data buses, enabling single-cycle instruction fetch plus data access. The 16-bit core delivers 16 MIPS at 32 MHz, and the integrated USB PHY eliminates external transceiver components, reducing BOM cost. The CTMU peripheral supports touch sensing and capacitive measurement without an external analog front-end. Typical applications include USB peripherals (HID, CDC, MSD class devices), battery-powered data loggers with USB charging, portable medical monitors, consumer-electronics human-interface devices, and low-power sensor hubs requiring USB connectivity. The combination of USB OTG and nanoWatt XLP makes the part especially attractive for self-powered USB devices that must idle in deep sleep and wake on USB attach. When designing with this part, observe Microchip's VDD/VSS pinout rules (all VSS and VDD pins must be connected for proper programming), place the USB DP/DN traces as a 90-ohm differential pair, and provide a stable 3.3V rail (the device supports 2.0V-3.6V operation). The DISVREG pin must be properly tied off per the datasheet alternative-connection table when the internal voltage regulator is bypassed. This page consolidates distributor pricing, drop-in same-package alternatives, and practical design guidance that go beyond the manufacturer datasheet, helping engineers select and qualify the PIC24FJ32GB002-I/SS for production designs.

詢價 聯絡我們
PIC24FJ32GB002T-I/SS - 16-bit 32KB Flash MCU w/USB OTG | Microchip
PIC24FJ32GB002T-I/SS

PIC24FJ32GB002T-I/SS - 16-bit 32KB Flash MCU w/USB OTG | Microchip

The Microchip Technology PIC24FJ32GB002T-I/SS is a 16-bit microcontroller from the PIC® XLP™ 24F family, featuring a 32 MHz core, 32 KB of Flash program memory (organized 11K x 24), and 8 KB of RAM in a 28-pin SSOP package. It integrates a USB 2.0 full-speed On-The-Go (OTG) controller alongside traditional serial peripherals (I²C, IrDA, SPI, UART/USART), and exposes 19 general-purpose I/O pins. A 16-bit microcontroller (MCU) is a class of embedded computing device that processes instructions on 16-bit-wide data paths, delivering a strong balance between 8-bit simplicity and 32-bit performance. Within the broader taxonomy, a 16-bit MCU sits inside the microcontroller hierarchy -> microcontroller -> embedded processor -> semiconductor device. The PIC24FJ family specifically emphasizes eXtreme Low Power (XLP) operation, positioning it for battery-powered applications where nanoWatt sleep currents and active-mode efficiency directly extend operating life. Key differentiating features of the PIC24FJ32GB002T-I/SS include its integrated USB OTG peripheral, the XLP nanoWatt technology sleep manager, and the 16 MIPS performance at 32 MHz (when operating at 3.3 V). The device provides 32 KB of self-programmable Flash and 8 KB of RAM, plus multiple 16-bit timers and configurable I/O. Compared to the non-USB PIC24FJ32GA002 sibling, the GB002's USB OTG controller makes it purpose-built for embedded USB-device and USB-host applications. From an architectural perspective, the part uses a modified Harvard RISC core with a 16-bit instruction word, supporting C-optimized code generation through Microchip's MPLAB XC16 compiler. Peripheral DMA, parallel master port, and on-chip temperature sensor round out the integration level. The internal 8 MHz FRC oscillator with PLL allows flexible system clocking without external crystals in many designs. Typical applications include USB HID peripherals such as custom keyboards, mice, and game controllers; embedded data-logging with USB mass-storage interfaces; low-power sensor hubs; and human-interface devices on consumer and industrial equipment. The USB OTG capability also makes the part suitable for point-of-sale terminals and portable medical instruments that must communicate directly with tablets or host PCs. A key design consideration when using this device is that the USB PHY requires a precise 48 MHz clock derived from the system oscillator; designers must configure the PLL correctly and respect the VUSB 3.3 V regulator pin. The DISVREG (disable-voltage-regulator) pin must be properly tied to ensure stable operation across all temperature and load conditions. This page consolidates distributor pricing, drop-in alternatives, and applied design notes not found in the manufacturer datasheet alone, helping engineers source and integrate the PIC24FJ32GB002T-I/SS with confidence.

詢價 聯絡我們
PIC24FJ32GB004-I/PT - 16-bit 32MHz USB MCU 32KB Flash | Microchip
PIC24FJ32GB004-I/PT

PIC24FJ32GB004-I/PT - 16-bit 32MHz USB MCU 32KB Flash | Microchip

The Microchip Technology PIC24FJ32GB004-I/PT is a 16-bit RISC microcontroller from the PIC24F family with integrated Full-Speed USB, 32 KB of Flash program memory, and 8 KB of RAM, housed in a 44-pin TQFP (10x10 mm) package. It operates at up to 32 MHz (16 MIPS) and supports 2.0V to 3.6V core and I/O supply, making it a member of Microchip's nanoWatt XLP extreme-low-power family. A microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash), data memory (RAM), and a rich set of peripherals (timers, communication interfaces, ADC, I/O ports). PIC24F devices use a 16-bit modified Harvard architecture with single-cycle instruction execution and a 16 x 16 hardware multiplier, occupying the mid-tier of Microchip's 8-bit/16-bit/32-bit microcontroller hierarchy (PIC10/12/16 -> PIC24F/dsPIC -> PIC32). The 'FJ' suffix denotes the Flash-based, low-power variant. Key features include Full-Speed USB 2.0 device support with on-chip transceiver, up to 33 general-purpose I/O pins, a 10-bit ADC with up to 13 input channels, five 16-bit timers (Timer1 plus four Timer2/3/4/5 type modules configurable as pairs), two UART modules, two SPI modules, and two I2C modules. The CTMU (Charge Time Measurement Unit) provides touch sensing and precise time measurement, and the RTCC keeps time in deep sleep modes. The device includes a hardware CRC and a Parallel Master Port on certain package variants. The PIC24FJ32GB004 is built on a CMOS process with nanoWatt XLP technology that delivers sleep currents below 1 uA with RAM retention, suiting battery-powered designs. Its 16-bit core, hardware multiply/divide, and C-optimized instruction set accelerate DSP-style tasks (FIR/IIR filtering, control loops) compared with 8-bit MCUs, while the Full-Speed USB 2.0 integrated transceiver eliminates the external PHY needed by many competing parts, reducing both BOM cost and PCB area in USB peripherals. Typical applications include USB Human Interface Devices (HID) such as keyboards, mice, and game controllers; USB-to-UART bridges; USB data loggers; medical instrumentation with USB connectivity; industrial USB sensor nodes; consumer electronics with USB charging/communication; and low-power IoT edge devices that require sporadic USB-driven updates. The wide 2.0V-3.6V supply range supports direct Li-Ion battery operation. When designing with this device, place the 4.7 kohm pull-up on D+ (or D- for low-speed) per the USB specification, add 100 nF decoupling on each VDD pin and a bulk 4.7-10 uF near the regulator, and ensure the VUSB pin sees 3.3V for the on-chip transceiver. Failure to do so is the most common cause of USB enumeration failures.

詢價 聯絡我們
PIC24FJ32GP202-E/MV - 32KB Flash, 16-bit XLP MCU | Microchip
PIC24FJ32GP202-E/MV

PIC24FJ32GP202-E/MV - 32KB Flash, 16-bit XLP MCU | Microchip

The Microchip Technology PIC24FJ32GP202-E/MV is a 16-bit PIC24F microcontroller from the GP2/GU2 family featuring 32KB of ECC Flash, 8KB of RAM, and a 32 MHz (16 MIPS) core, housed in a 28-pin UQFN (4x4 mm) MV package with extended (-40C to +125C) temperature range. It integrates core independent peripherals (CIPs) and a Full Speed USB 2.0 Host/Device/OTG controller, with sleep current measured in the hundreds of nA while retaining the complete RAM and interrupt state. What is a PIC24F microcontroller? The PIC24F is Microchip's 16-bit microcontroller family using a modified Harvard RISC architecture with 16 MIPS performance at 32 MHz. It sits above the 8-bit PIC16/PIC18 families in performance and below the dsPIC/PIC32 families. It is widely used in ultra-low-power (XLP) battery applications, mixed-signal designs, and USB-enabled embedded products where 32-bit performance is overkill but 8-bit MCUs lack the throughput or peripherals. Key features include hardware ECC on Flash for greater data integrity, 4 channels of DMA, up to 22 channels of 10/12-bit ADC at 500 ksps, 5 16-bit timers, configurable logic cells (CLC), and multiple serial interfaces (UART, SPI, I2C). The integrated USB 2.0 FS OTG controller with on-chip transceiver eliminates the need for external PHY chips, significantly shrinking the BOM for low-power USB devices. Architecturally, the PIC24FJ32GP202 uses a 16-bit modified Harvard core with a 24-bit instruction word for compact code density. The CIPs (configurable logic cells, comparators, PWM, RTCC, etc.) operate independently of the CPU, allowing events such as ADC-triggered conversions and PWM-shutdown on comparator faults without CPU wake-up - a key reason the XLP sleep current stays in the nanoamp range. Typical applications include USB HID peripherals, IoT sensor nodes, e-metering, low-power medical wearables, consumer battery chargers, and industrial control with USB diagnostic interfaces. The extended -40C to +125C temperature range (the 'E' suffix) makes it suitable for automotive under-hood and outdoor industrial deployments. When designing, ensure VDD decoupling uses a 100 nF ceramic placed within 2 mm of the VDD pin and a 10 uF bulk on the main rail. The UQFN-28 exposed pad must be soldered to the PCB ground plane for proper thermal dissipation and electrical ground reference - missing this connection causes erratic USB operation. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone, with a focus on USB-enabled low-power embedded applications.

詢價 聯絡我們
PIC24FJ32GP202-I/ML - 32MHz 32KB Flash MCU | Microchip
PIC24FJ32GP202-I/ML

PIC24FJ32GP202-I/ML - 32MHz 32KB Flash MCU | Microchip

The Microchip Technology PIC24FJ32GP202-I/ML is a 16-bit PIC24 microcontroller with a 32 MHz operating frequency, 32 KB of ECC Flash program memory, and 8 KB of SRAM in a 28-QFN 6x6 mm package. It operates at 16 MIPS and is designed for compact embedded systems requiring efficient code execution, low-power operation, and integrated serial peripherals. A PIC24 MCU is a 16-bit RISC microcontroller within the broader embedded-controller hierarchy of MCU, semiconductor, and programmable logic. The PIC24 family combines a compact instruction set, digital peripherals, analog conversion functions, and event-driven control capabilities. This makes the device useful when a system needs deterministic peripheral handling without relying on a higher-cost application processor. The PIC24FJ32GP202-I/ML provides 32 KB of ECC Flash and 8 KB of SRAM, together with interfaces including I2C, SPI, and UART. According to the Microchip product information, the PIC24FJ GP2 family also includes core-independent peripherals and supports low-power sleep operation, including sleep current down to a few hundred nanoamperes while retaining core-independent peripheral functionality. These characteristics support responsive systems that spend substantial time between active transactions. At a maximum clock frequency of 32 MHz, the device executes up to 16 million instructions per second. ECC Flash protects stored program data against detected memory errors, while the 8 KB SRAM provides working space for protocol buffers, sampled data, and control state. The industrial-temperature ordering code identifies the component as the -I/ML variant, with the ML package code corresponding to the 28-QFN 6x6 mm outline. Typical applications include USB-connected control accessories, low-power sensor nodes, industrial data-acquisition equipment, compact USB-to-serial interfaces, and battery-operated embedded controllers. The combination of 32 MHz processing, multiple serial interfaces, ECC program memory, and a low-power sleep mode is particularly useful in designs that balance protocol flexibility, memory reliability, and board area. PCB planning should preserve the exposed-pad land pattern and thermal and electrical requirements of the 28-QFN package. Place decoupling capacitors close to the supply pins, route high-current and sensitive signals carefully, and follow the manufacturer's pin-description table when assigning every I/O. Firmware should also use the core-independent peripherals where low-power wake-up behavior is important. This product page combines the manufacturer's device information with package-specific sourcing guidance, application-oriented engineering notes, and same-footprint replacement analysis. These details help engineers evaluate the PIC24FJ32GP202-I/ML before committing to a 28-QFN PCB layout or migration plan.

詢價 聯絡我們
PIC24FJ32GP202-I/MV - 32KB Flash, 32MHz 16-bit MCU | Microchip
PIC24FJ32GP202-I/MV

PIC24FJ32GP202-I/MV - 32KB Flash, 32MHz 16-bit MCU | Microchip

The Microchip Technology PIC24FJ32GP202-I/MV is a 16-bit PIC24F microcontroller with 32 KB of ECC Flash program memory, 8 KB of RAM, and a maximum CPU clock of 32 MHz (16 MIPS), housed in a 28-pin UQFN (4x4 mm) package. It is part of the PIC24FJ GP2/GU2 eXtreme Low-Power (XLP) family, integrating Full-Speed USB 2.0 Host/Device/OTG, multiple Core Independent Peripherals (CIPs), two I2C, two SPI, and configurable logic cells (CLC) for hardware state-machine offload. A PIC microcontroller (MCU) is a single-chip computer that combines a CPU, non-volatile program memory (Flash), volatile data memory (RAM), timers, communication peripherals, and analog blocks on one die. The PIC24F series uses a 16-bit modified-Harvard architecture with a rich instruction set tuned for C-compiled embedded code. Within the Microchip taxonomy this part sits at microcontroller -> 16-bit MCU -> PIC24F family -> XLP low-power sub-family, and at the system level it is a member of the broader embedded computing / power-management-aware processing tier that bridges simple 8-bit MCUs and higher-performance 32-bit Cortex-M devices. Key differentiators include on-chip ECC Flash for higher reliability, sub-uA sleep current with full RAM retention, hardware DMA, six timer modules, multiple analog comparators, and integrated USB 2.0 Full-Speed PHY - eliminating the need for an external transceiver. The device operates from 2.0 V to 3.6 V across -40C to +85C industrial temperatures. Typical applications include USB peripherals (HID, CDC, custom class), low-power IoT sensor nodes, battery-powered consumer devices, industrial sensor hubs, and small graphical/audio accessories. The UQFN-28 footprint suits space-constrained handhelds where a 4x4 mm MCU footprint is required. When designing in this part, plan a 3.3 V rail with adequate bulk decoupling near VDD/VSS pairs, assign the USB D+/D- to the dedicated package pins, and use MPLAB X IDE with the XC16 compiler plus Microchip's USB stack for protocol support. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們