積體電路

子分類

📁 ADC/DAC 3,100+ 產品 📁 放大器 IC 1,900+ 產品 📁 音訊編解碼器 18 產品 📁 音訊 IC 2 產品 📁 時脈與計時 660+ 產品 📁 Comparator ICs 1 產品 📁 DSP 1,100+ 產品 📁 資料擷取 IC 2 產品 📁 數位電位器 4 產品 📁 顯示驅動器與控制器 1 產品 📁 FPGA 與 CPLD 7,300+ 產品 📁 介面 IC 3,300+ 產品 📁 LED 驅動器 1 產品 📁 邏輯 IC 460+ 產品 📁 記憶體 IC 870+ 產品 📁 微控制器 20,000+ 產品 📁 微處理器 4 產品 📁 馬達驅動器 1 產品 📁 其他 1 產品 📁 感測器與偵測器介面 1 產品 📁 特殊用途 IC 15 產品 📁 視訊 IC 14 產品

產品（39,000+)

PIC24FJ32GU203T-I/M5 - 32KB USB MCU, 36-UQFN | Microchip
PIC24FJ32GU203T-I/M5

PIC24FJ32GU203T-I/M5 - 32KB USB MCU, 36-UQFN | Microchip

The Microchip Technology PIC24FJ32GU203T-I/M5 is a 16-bit PIC microcontroller from the PIC24FJ 'GP2/GU2' family, delivering 16 MIPS at 32 MHz with 32 KB of ECC Flash and 8 KB of RAM in a 36-pin 5x5 mm UQFN package. It integrates Full-Speed USB 2.0 Host/Device/OTG, multiple Core Independent Peripherals (CIPs), and Microchip's eXtreme Low Power (XLP) technology with sub-microamp sleep currents while retaining RAM and peripherals. The 'T' suffix denotes Tape & Reel packaging, while the 'I' suffix indicates the industrial -40C to +85C temperature grade, and 'M5' is the package designator for the 5x5 mm 36-UQFN. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, program memory, working RAM, and a configurable peripheral set around an internal bus. The PIC24F family uses a 16-bit modified Harvard architecture with a wide 24-bit instruction word, giving it higher code density than 8-bit MCUs while retaining deterministic interrupt response. Within Microchip's portfolio, the PIC24F sits between the 8-bit PIC18 and the 32-bit PIC32, targeting low-power connected applications with USB. Key hypernyms: MCU -> microcontroller -> embedded controller -> semiconductor IC. Key features include 32 MHz maximum CPU clock, 32 KB (11K x 24) ECC Flash for code and data storage, 8 KB RAM, and a 2.0V to 3.6V VDD operating range suited to single-cell Li-ion or 3.3V regulated rails. The device integrates 2x I2C, 2x SPI, 2x UART, 1x USB FS Host/Device/OTG, 5x MCCP/SCCP timers, 6x general-purpose timers, 3x analog comparators, 4x Configurable Logic Cells (CLC), and 2x DMA channels. With XLP technology, sleep currents drop to a few hundred nanoamps while retaining state, enabling years of battery life on coin cells. Typical applications include USB HID peripherals such as keyboards, mice, and game controllers, USB-to-UART bridges, battery-powered IoT sensor nodes with USB charging, wearable health monitors, and low-power human-interface devices. The compact 36-UQFN 5x5 mm footprint makes it well-suited to space-constrained consumer and industrial designs. When designing with this part, place the 0.1 uF VDD decoupling capacitor within 3 mm of the VDD pin and provide a 4.7 uF bulk capacitor on the USB VBUS rail if the device is bus-powered. Ensure the 32.768 kHz secondary oscillator load capacitors are matched to the crystal manufacturer's CL specification to avoid start-up failures. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC24FJ GP/GU family, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
PIC24FJ32GU205-E/M4 - 32KB USB XLP MCU 16-bit | Microchip
PIC24FJ32GU205-E/M4

PIC24FJ32GU205-E/M4 - 32KB USB XLP MCU 16-bit | Microchip

The Microchip Technology PIC24FJ32GU205-E/M4 is a 16-bit microcontroller from the PIC24FJ GP2/GU2 family, integrating 32KB ECC Flash, 8KB RAM, and Full-Speed USB 2.0 Host/Device/OTG into a compact 48-pin UQFN (6x6 mm) package. It operates at up to 32 MHz (16 MIPS) across an industrial 2.0V to 3.6V core supply, with eXtreme Low Power (XLP) sleep currents in the hundreds of nA while retaining core independent peripherals (CIPs) and full RAM. The PIC24FJ32GU205-E/M4 suffix /M4 denotes the 48-pin UQFN package, and the -E prefix designates the extended -40C to +125C operating temperature grade for harsh-environment deployments. A 16-bit MCU is a microcontroller with a 16-bit data path, register width, and ALU, sitting between 8-bit MCUs (PIC16, AVR) and 32-bit MCUs (Cortex-M, PIC32). The PIC24F family is Microchip's 16-bit ultra-low-power line, and the GU2 sub-family specifically adds Full-Speed USB plus rich CIPs - hardware timers, CRC, RTCC, comparators, and ADC - that run without CPU intervention, which is critical for low-power IoT and USB device designs. Key features include hardware USB 2.0 Full-Speed with on-chip transceiver and internal pull-ups, 32KB ECC Flash (11K x 24 words) for code and data EEPROM emulation, 8KB SRAM, and multiple power-saving modes including Deep Sleep with RTCC, allowing battery-powered designs to retain state for years. The 48-pin UQFN exposes up to 38 I/O, three 16-bit timers, a 12-bit ADC, three UARTs, two SPI, two I2C, and the USB endpoint hardware. Internal die temperature sensor and watchdog timer add diagnostic and safety hooks. Typical applications include USB HID peripherals (keyboards, mice, custom input devices), USB-to-UART/SPI/I2C bridges, USB battery chargers, sensor hubs, portable medical accessories, and e-metering or industrial data loggers. The extended -40C to +125C range also supports automotive interior and under-hood telemetry where USB-C diagnostics ports are used. Pair the device with a USB Type-C port controller or direct USB Micro-B connector; the internal pull-ups and full-speed PHY remove the need for an external PHY chip. Design consideration: Place the VUSB3V3 pin's 0.47uF decoupling capacitor within 2 mm of the pin to keep USB signal-integrity margins; route D+/D- as a 90 ohm differential pair. The UQFN's exposed pad must be soldered to a continuous ground pour to meet the 31 C/W theta_JA thermal rating. Bulk-decouple VDDCORE and AVDD separately with 1uF X7R ceramics, and add 10uF on VBUS for inrush surge support. This page synthesizes verified distributor pricing, drop-in alternatives, and practical design notes that you will not find in the manufacturer datasheet alone, including same-family variants in the Site MPN list that share the 48-pin UQFN (M4) footprint for direct PCB reuse.

詢價 聯絡我們
PIC24FJ32GU205-E/PT - 32KB Flash USB MCU 48-TQFP E-temp | Microchip
PIC24FJ32GU205-E/PT

PIC24FJ32GU205-E/PT - 32KB Flash USB MCU 48-TQFP E-temp | Microchip

The Microchip Technology PIC24FJ32GU205-E/PT is a 16-bit PIC24F microcontroller with integrated Full-Speed USB 2.0 Host/Device/OTG, 32KB of ECC Flash program memory, and 8KB of SRAM, housed in a 48-pin TQFP (7x7 mm) package rated for the -40C to +125C extended (E) temperature range. It runs the 16-bit PIC24F core at up to 32MHz (16 MIPS), delivering the right balance of throughput and deterministic interrupt response for connected-embedded USB applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (SRAM), and a set of on-chip peripherals (timers, ADC, communication controllers, I/O). In the wider taxonomy, this part is a 16-bit MCU, a sub-class of microcontrollers, which itself sits under embedded processors and ultimately semiconductors. The PIC24F architecture adds hardware Multiply/Divide and DSP-oriented instructions to the standard PIC instruction set, simplifying sensor-signal and audio-rate processing without offloading to a companion DSP. Key features include hardware ECC on Flash for improved data retention, eXtreme Low Power (XLP) sleep modes with currents in the few-hundreds-of-nA range while retaining core state, a 12-bit ADC with up to 16 channels, multiple UART/SPI/I2C peripherals, and Core Independent Peripherals (CIPs) that let hardware timers and logic blocks operate without CPU intervention. The integrated USB 2.0 Full-Speed transceiver plus on-chip PHY removes the need for an external PHY in HID, CDC, vendor-class, or basic host applications. Typical applications include USB HID/CDC peripherals (barcode scanners, custom HIDs), low-power sensor nodes with periodic USB wake, industrial data loggers over USB, USB-to-UART bridges, and battery-powered medical or instrumentation devices needing deterministic 16-bit control plus USB connectivity. E-temp operation opens automotive under-hood and industrial cabinet deployments where commercial-grade parts would fail. When designing with this part, budget the 48-pin TQFP thermal envelope for the E-temp range and confirm the USB bus-power profile against the target host; on-chip regulation and self-powered bus operation are both supported but require careful bypassing. Plan the linker layout so the USB vector is in the upper region for deterministic interrupt latency. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
PIC24FJ32GU205-I/PT - 16-bit 32MHz 32KB Flash USB MCU TQFP-48 | Microchip
PIC24FJ32GU205-I/PT

PIC24FJ32GU205-I/PT - 16-bit 32MHz 32KB Flash USB MCU TQFP-48 | Microchip

The Microchip Technology PIC24FJ32GU205-I/PT is a 16-bit microcontroller from the PIC24F GP2/GU2 family that integrates Full Speed USB 2.0 Host/Device/OTG, 32KB of ECC Flash program memory, and 8KB of RAM in a 48-pin TQFP (7x7 mm) package. It operates at up to 32 MHz (16 MIPS) from a 2.0-3.6V supply, with eXtreme Low Power (XLP) sleep currents down to a few hundred nanoamperes while retaining SRAM and core-independent peripherals. The device ships in the industrial temperature grade (-40C to +85C) and is part of Microchip's low-pin-count USB-capable MCU lineup. A PIC microcontroller (Programmable Integrated Circuit) is a single-chip computer built around a RISC core, on-chip Flash for program storage, RAM for data, and a rich set of peripherals. PIC24F devices use a 16-bit modified Harvard architecture, positioning them between 8-bit PIC16/PIC18 parts and 32-bit PIC32 parts. They are widely used in low-power, mixed-signal embedded designs that need deterministic behavior and a small footprint without stepping up to ARM Cortex-M silicon. Within the broader taxonomy, the PIC24FJ32GU205 belongs to: microcontroller -> 16-bit MCU -> PIC24F family -> eXtreme Low Power subfamily -> USB-enabled GU2 series. Key features include four 16-bit timers, a 12-bit A/D converter with up to 13 channels, configurable logic cells, multiple UART/SPI/I2C peripherals, and a hardware RTCC. The on-chip Full-Speed USB 2.0 transceiver and SIE simplify designs that need USB device, host, or OTG without an external PHY. ECC Flash improves reliability in industrial and consumer applications by detecting single-bit errors at runtime. The 48-pin TQFP provides ample GPIO while remaining compatible with hand-solderable prototypes and standard 0.5 mm pitch reflow profiles. Typical applications include low-power USB peripherals (HID, CDC, custom HID sensors), portable medical instruments, e-metering and sensor hubs, consumer accessories that exchange data via USB OTG, and battery-powered IoT edge nodes where the XLP sleep modes extend operating life. Designers choose this part when USB connectivity is mandatory but the BOM cost and complexity of an ARM Cortex-M part is not justified. When designing with this device, verify the USB bus-power rail current budget and ensure VBUS detection is correctly implemented for self-powered vs bus-powered topologies. Decouple VDD/VUSB with 100nF + 4.7uF ceramics placed close to the pins; the on-chip PLL requires a clean analog supply. Use the Microchip MPLAB X IDE and the free MPLAB Code Configurator (MCC) plugin to generate peripheral drivers and USB stacks quickly. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
PIC24FJ32GU205T-I/M4 - 16-bit USB MCU 32KB Flash | Microchip
PIC24FJ32GU205T-I/M4

PIC24FJ32GU205T-I/M4 - 16-bit USB MCU 32KB Flash | Microchip

The Microchip Technology PIC24FJ32GU205T-I/M4 is a 16-bit microcontroller from the PIC24F 'GP2/GU2' family featuring a 32 MHz CPU (16 MIPS), 32 KB of ECC Flash program memory, 8 KB of RAM, and integrated Full-Speed USB 2.0 Host/Device/OTG support, all housed in a 48-pin UQFN 6x6 mm package. This tape-and-reel packaged variant operates across an industrial temperature range of -40C to +85C, making it suitable for embedded designs that demand reliable USB connectivity in compact form factors. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and programmable peripherals. The PIC24F family is a 16-bit modified Harvard architecture line from Microchip that targets low-power and USB-enabled applications, sitting between 8-bit PIC MCUs and 32-bit ARM Cortex parts in the broader MCU taxonomy: MCU -> 16-bit MCU -> PIC24F family -> PIC24FJ USB sub-family -> power management and connectivity IC. Key features of this part include 32 KB Flash (11K x 24 words) with Error-Correcting Code (ECC) for improved reliability, hardware USB 2.0 Full-Speed transceiver, Microchip's proprietary eXtreme Low Power (XLP) technology with sleep currents down to a few hundred nanoamps while retaining the complete SRAM and peripheral state, and a rich set of Core Independent Peripherals (CIPs) such as CLC, MCCP, and configurable logic that offload tasks from the CPU. The 48-pin UQFN package with 0.4 mm pitch enables compact PCB layouts while still exposing ample GPIO for sensor and HMI integration. Typical applications include USB peripherals (HID, CDC, MSD class devices), battery-powered IoT sensor nodes leveraging XLP sleep modes, industrial data loggers with USB mass-storage download, low-cost medical USB diagnostic accessories, and consumer products that require both USB device charging emulation and host capability for firmware updates. The integrated USB PHY eliminates external transceiver components, reducing BOM cost and PCB area. When designing with this MCU, ensure the USB DP/DM traces are 90-ohm differential, length-matched, and routed over a continuous ground plane; decoupling capacitors must be placed adjacent to each VDD/VSS pair.

詢價 聯絡我們
PIC24FJ32MC101-E/P - 16-Bit 32MHz Motor MCU | Microchip
PIC24FJ32MC101-E/P

PIC24FJ32MC101-E/P - 16-Bit 32MHz Motor MCU | Microchip

The Microchip Technology PIC24FJ32MC101-E/P is a 16-bit PIC24 motor-control microcontroller with a 32 MHz operating speed, 16 MIPS performance, 32 KB of Flash program memory, 2 KB of SRAM, and a 20-pin PDIP package. It operates from a 3.0 V to 3.6 V supply and provides 15 general-purpose I/O lines for compact embedded motor-control systems. A PIC24 microcontroller is a programmable semiconductor combining a CPU core, memory, timers, communication peripherals, and analog functions on one integrated circuit. The PIC24 family uses a 16-bit modified Harvard architecture with an enhanced instruction set and addressing modes. This places the device in the hierarchy of embedded microcontroller, 16-bit RISC controller, embedded processor, and semiconductor, making it suitable for control systems that need more computation than an 8-bit MCU without the complexity of a higher-power application processor. The PIC24FJ32MC101-E/P includes dedicated motor-control resources such as motor-control PWM modules, CTMU, and peripheral pin selection. Its 16 MIPS processing capability gives motor algorithms, communication routines, and supervisory logic more throughput than typical 8-bit designs. The 10-bit ADC supports analog feedback from current, position, speed, and temperature sensing networks, while I2C, SPI, and UART interfaces enable connection to sensors, drivers, debug equipment, and human-interface modules. The 32 KB Flash memory provides 11K × 24 words of program storage, while 2 KB of SRAM supports working variables, control state, and communication buffers. Fifteen I/O pins offer access to digital control signals in a 20-pin PDIP package measuring 0.300 inches wide with a 7.62 mm row spacing. The device supports an industrial temperature range of -40 °C to +125 °C and is identified as an AEC-Q100 automotive-grade option. Typical applications include single- or two-phase brushed motor controllers, low-power pump and fan controllers, compact power tools, appliance drive systems, automotive accessories, and industrial actuator modules. The combination of dedicated PWM, CTMU, and peripheral pin selection permits functions and measurements to be routed efficiently among the limited package pins while preserving CPU time for control algorithms. Designers should allocate decoupling and analog grounding carefully because the ADC, CTMU, and motor-control peripherals may share a compact 20-pin board area. Motor power-stage switching should remain physically separated from sensitive control traces, and protection should cover transient, reverse-voltage, and ESD events. The PIC24FJ32MC101-E/P is particularly appropriate when a through-hole 20-pin package, 32 MHz processing, and dedicated motor-control peripherals are required in the same device. This product page combines the manufacturer family information with package, memory, interface, temperature, and purchasing details. It also provides application guidance, design considerations, and a strict drop-in assessment so engineers can distinguish electrically similar controllers from genuine pin-compatible replacements.

詢價 聯絡我們
PIC24FJ32MC101-E/SO - 16-bit 16 MIPS 32KB Flash MCU | Microchip
PIC24FJ32MC101-E/SO

PIC24FJ32MC101-E/SO - 16-bit 16 MIPS 32KB Flash MCU | Microchip

The Microchip PIC24FJ32MC101-E/SO is a 16-bit microcontroller from the PIC24F motor-control family that runs at 16 MIPS and integrates 32 KB (11K x 24) of Flash, 2 KB of RAM, and a 20-pin SOIC wide-body package for surface-mount motor drive boards. The -E suffix denotes the extended industrial temperature grade (-40C to +125C), and the /SO designator maps to a 7.50 mm body width SOIC-20 footprint. A 16-bit MCU (microcontroller unit) is a single-chip computer that combines a 16-bit CPU core, on-chip Flash program store, SRAM data memory, and a rich set of digital and analog peripherals. Within Microchip's taxonomy, PIC24F devices sit between 8-bit PIC16/PIC18 parts and the higher-performance dsPIC33/PIC32 families, and the PIC24FJ32MC101/102 sub-family is specifically aimed at ultra-low-cost motor-control applications, adding Motor Control PWM (MCPWM) and the Configurable Logic Cell (CTMU) for touch and timing functions. Key features include 16 MIPS performance from a 32 MHz internal oscillator, 6-channel MCPWM with independent time bases for sensorless BLDC or brushed DC drives, a 10-bit 1.1 Msps Analog-to-Digital Converter with up to 9 input channels, Peripheral Pin Select (PPS) for flexible I/O mapping, and 5V-tolerant I/O for mixed-signal boards. The 32 KB Flash stores both application code and bootloader image, while the 2 KB RAM supports small TCP/IP stacks, sensor-fusion buffers, or GUI command queues. The integrated Charge Time Measurement Unit (CTMU) enables capacitive touch, line-voltage zero-cross detection, and basic flow measurement. Typical applications include ceiling-fan and pump motor controllers, low-power HVAC blower drives, e-bike and small-EV pedal-assist control, white-goods BLDC modules, and USB-powered sensor hubs where the 5V-tolerant pins simplify interfacing to legacy 5V peripherals. The wide 20-SOIC body keeps the part friendly for hand-rework, while the PPS-remappable peripherals let designers shrink the PCB by routing UART, SPI, or PWM to whichever physical pins are left over. When designing with this device, plan for the 5V-tolerant digital I/O requirement and remember that the 10-bit ADC reference is shared with the I/O supply. A 100 nF decoupling capacitor within 5 mm of VDD is recommended, and an external 32.768 kHz crystal plus the RTCC peripheral support real-time-clock functionality on battery-backed designs. This page consolidates distributor pricing, drop-in alternatives from Microchip's PIC24F family, and practical design guidance that goes beyond the device datasheet PDF, helping engineers select between PIC24F MC variants without re-reading a 300-page family reference manual.

詢價 聯絡我們
PIC24FJ32MC101-I/P - 16-bit 32KB Flash Motor Control MCU | Microchip
PIC24FJ32MC101-I/P

PIC24FJ32MC101-I/P - 16-bit 32KB Flash Motor Control MCU | Microchip

The Microchip PIC24FJ32MC101-I/P is a 16-bit microcontroller from the PIC24F family, featuring 32KB of Flash program memory (11K x 24 words), 2KB of RAM, and a maximum CPU speed of 16 MIPS, all integrated into a 20-pin PDIP through-hole package. The device is purpose-built for low-cost, high-performance motor control applications and includes dedicated Motor Control PWM (MCPWM) peripherals, a Charge Time Measurement Unit (CTMU), and Peripheral Pin Select (PPS) for flexible signal routing. What is a 16-bit motor control MCU? A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals. A 16-bit MCU uses a 16-bit data path, which doubles the throughput of an 8-bit MCU while remaining cheaper and lower-power than 32-bit ARM Cortex devices. Motor-control MCUs add specialized PWM channels, fast ADCs, and quadrature encoder interfaces to drive brushed, brushless DC, or stepper motors without external logic. The PIC24FJ32MC101 sits in the hierarchy: microcontroller -> embedded MCU -> 16-bit MCU -> motor-control MCU -> PIC24F family -> PIC24FJ32MC101 sub-family. Key features include up to 16 MIPS performance at 32 MHz, 6 channels of 10-bit ADC at 500 ksps, 5 timers, 3 analog comparators, 3 MCPWM channels with complementary outputs and dead-band control, plus standard communication peripherals including I2C, SPI, and UART. The CTMU enables touch sensing and precise time-based measurements such as capacitive sensing or simple gesture detection, while PPS allows digital peripheral pins to be remapped across most I/O pads, simplifying PCB layout. Technically, the PIC24FJ32MC101 uses a Modified Harvard architecture with a 16-bit wide data path and 24-bit wide instructions, supported by a hardware multiplier for fast DSP-style operations. The wide instruction word accelerates compiled C code, and the 16-channel peripheral event system reduces CPU overhead. The CTMU block provides a constant-current source that, combined with ADC sampling, yields high-resolution timing for ultrasonic distance, capacitive touch, and time-of-flight applications. Typical applications include BLDC and PMSM motor controllers, small DC and stepper motor drives, fan and pump controllers, RC servo and robotic actuators, low-cost position-control systems with quadrature encoder feedback, LED lighting drivers with constant-current regulation, and capacitive touch user interfaces. The wide operating range of 3.0V to 3.6V and industrial -40C to +85C temperature grade make it suitable for both consumer appliances and industrial equipment. When designing with this part, place a 10uF bulk capacitor plus a 0.1uF decoupling capacitor adjacent to the VDD pin, keep the analog VDD/VSS traces short, and configure PPS carefully to avoid unintended peripheral pin collisions on the 20-pin package. This page synthesizes distributor pricing, drop-in PIC24F family alternatives, and PCB design guidance not found on the standalone Microchip datasheet, giving engineers a single reference for selection, procurement, and layout.

詢價 聯絡我們
PIC24FJ32MC101-I/SO - 16-bit 32KB Flash MCU 20-SOIC | Microchip
PIC24FJ32MC101-I/SO

PIC24FJ32MC101-I/SO - 16-bit 32KB Flash MCU 20-SOIC | Microchip

The Microchip Technology PIC24FJ32MC101-I/SO is a 16-bit microcontroller from the PIC24FJ32MC family, featuring 32KB of FLASH program memory and 2KB of RAM, packaged in a 20-pin SOIC (SO) wide-body 7.50mm package. It executes instructions at 16 MIPS throughput via a modified Harvard RISC architecture with an internal 32 MHz oscillator, while operating from a 3.0V to 3.6V single supply across an industrial -40C to +125C temperature range. A PIC24F microcontroller is a 16-bit reduced instruction set computing (RISC) MCU in the broader PIC24F/PIC24H family of dsPIC-style microcontrollers from Microchip Technology. Within the wider product hierarchy, PIC24F belongs to the 16-bit microcontroller class -> microcontroller -> embedded controller -> semiconductor IC. The "24F" prefix denotes the FLASH-based, low-power variant optimised for cost-sensitive motor control and general-purpose applications, while the "MC" suffix in this part designates the Motor Control sub-family with hardware MCPWM, CTMU, and PPS peripherals. Key features include a 16-channel 10-bit ADC with 500 ksps conversion rate, two UART modules, one SPI port, one I2C bus, five 16-bit timers, three analogue comparators, a Charge Time Measurement Unit (CTMU), and a Peripheral Pin Select (PPS) system that remaps digital peripherals to a wide range of I/O pins. The device integrates a 6-channel MCPWM (Motor Control PWM) module and supports up to 15 I/O pins in this 20-pin package. It also includes a configurable Watchdog Timer, brown-out reset, and an in-circuit serial programming (ICSP) interface. Architecturally the PIC24FJ32MC101 combines a 16-bit datapath with a single-cycle ALU and hardware multiply/divide, allowing deterministic interrupt response and C-compiler efficient code. The CTMU enables capacitive touch sensing and precise time measurement, while the PPS router eliminates the fixed peripheral-to-pin mapping constraint of older PIC16/PIC18 parts. An integrated 8 MHz internal RC oscillator with PLL multiplication to 32 MHz removes the need for external crystals in many designs, reducing BOM cost. Typical applications include BLDC and PMSM motor drives (low-voltage fan, pump, appliance control), small appliance and white goods motor control boards, LED lighting controllers, sensor interfaces (using CTMU for touch/proximity), and general-purpose 3.3V embedded control. Automotive infotainment auxiliary modules and consumer robotics also benefit from the wide supply and temperature ranges. The combination of small footprint, motor-control peripherals, and on-chip CTMU makes this part a frequent choice where designers need compact, single-chip motion control. Designers should note that the 3.0V to 3.6V supply range is narrow - it is incompatible with 5V systems without level shifting. Decouple VDD/VSS with at least a 100 nF ceramic capacitor placed within 5 mm of the supply pins. The analog VDD/VSS pair requires a separate clean analog ground plane, and the ADC conversion accuracy is sensitive to high-frequency digital switching near AVSS - keep switching nodes and the MCU grounds segregated to one point. This page synthesises real-time distributor pricing, verified drop-in alternatives from the same PIC24FJ32MC family, and practical design notes that go beyond the manufacturer datasheet to help engineers shorten time-to-prototype.

詢價 聯絡我們
PIC24FJ32MC101T-E/SO - 16-bit Motor Control MCU, 20-SOIC | Microchip
PIC24FJ32MC101T-E/SO

PIC24FJ32MC101T-E/SO - 16-bit Motor Control MCU, 20-SOIC | Microchip

The Microchip Technology PIC24FJ32MC101T-E/SO is a 16-bit microcontroller from the PIC24F motor-control family, featuring 32 KB Flash, 2 KB RAM, and an integrated Motor Control PWM (MCPWM) peripheral with three PWM channels, in a 20-pin SOIC package rated for the automotive E temperature grade (-40C to +125C). This device belongs to the 16-bit microcontroller category (MCU -> microcontroller -> embedded processor -> semiconductor). A 16-bit MCU integrates a CPU core, program memory (Flash), data memory (SRAM), and configurable peripherals on a single die; PIC24F devices use a modified Harvard architecture running the PIC instruction set at up to 16 MIPS for motor-control tasks such as BLDC commutation and PFC. Key features include 32 KB of Flash program memory (11K x 24 words), 2 KB of SRAM, three 16-bit MCPWM channels with complementary or independent outputs, three on-chip analog comparators, a Charge Time Measurement Unit (CTMU) for capacitive touch, Peripheral Pin Select (PPS) for flexible I/O mapping, and a Real-Time Clock Calendar (RTCC) module. The 16 MIPS modified-Harvard core delivers deterministic interrupt latency that is critical for field-oriented control loops running at tens of kHz. PPS removes the fixed-pin peripheral constraint of older PIC16/PIC18 parts, and the CTMU adds cost-effective capacitive-touch sensing. Typical applications include low-cost BLDC and PMSM motor drives (fans, pumps, small appliances), DC-DC converter control loops, LED lighting controllers, capacitive-touch user interfaces, and automotive body modules that operate over the extended temperature range. When designing with this device, plan I/O assignments around the PPS mapping (each peripheral function can be assigned to one of several pins), and reserve one timer for the PWM time base. Note that the SO package has fewer I/O than the QFN variant; pin-limited applications should consider PIC24FJ32MC102. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet alone, enabling faster component selection for motor-control and embedded designs.

詢價 聯絡我們
PIC24FJ32MC102-E/ML - 16-Bit 32KB Flash Motor Control MCU | Microchip
PIC24FJ32MC102-E/ML

PIC24FJ32MC102-E/ML - 16-Bit 32KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24FJ32MC102-E/ML is a 16-bit PIC24F microcontroller from the PIC24FJ32MC1xx motor-control family, featuring 32KB of Flash program memory, 2KB of RAM, and 16 MIPS performance in a 28-pin QFN (6x6) package. It integrates dedicated motor-control peripherals including three Motor Control PWMs (MCPWM), three analog comparators, a Charge Time Measurement Unit (CTMU), Real-Time Clock/Calendar (RTCC), and Peripheral Pin Select (PPS) for flexible signal routing. A 16-bit microcontroller (MCU) is a microprocessor that processes instructions 16 bits at a time, sitting in the hierarchy between 8-bit MCUs (cost-optimized, simpler control) and 32-bit MCUs (higher performance, more complex applications). Within the broader taxonomy, the PIC24F belongs to the microcontrollers -> embedded controllers -> semiconductor category. The PIC24FJ32MC102 targets cost-sensitive BLDC, PMSM, and stepper motor control applications where the larger 16-bit data path simplifies fractional arithmetic for control loops, and the integrated motor-control peripherals eliminate the need for an external gate driver controller for small motors. Key features include 21 general-purpose I/O lines, three 16-bit timers, two UART, one SPI, one I2C, a 10-bit ADC with up to 9 channels and 500 ksps conversion rate, and an internal 8 MHz oscillator with PLL support up to 32 MHz. The CTMU enables capacitive touch sensing and precise time-of-flight measurements, while the RTCC supports calendar functions with backup power from a separate VBAT pin. The PPS module routes most digital peripherals to user-selected pins, simplifying PCB layout and BOM. Typical applications include ceiling fans, RC servo drives, small pumps, white-goods motor controllers, and low-cost BLDC/PMSM sensorless or sensored drives. Industrial uses extend to small appliance inverters and toys. Designers choose the PIC24FJ32MC102 for compact 28-pin motor-control designs that require deterministic PWM, fault protection via comparators, and field-proven PIC24F firmware libraries (motor control, USB, graphics). It is pin-compatible with the PIC24FJ16MC102 (half the Flash) and the PIC24FJ32MC104 (32-pin variants with more peripherals).

詢價 聯絡我們
PIC24FJ32MC102-E/SO - 16-bit 16MIPS 32KB Flash Motor Control MCU | Microchip
PIC24FJ32MC102-E/SO

PIC24FJ32MC102-E/SO - 16-bit 16MIPS 32KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24FJ32MC102-E/SO is a 16-bit PIC24F microcontroller from the motor control family, executing up to 16 MIPS and integrating 32 KB of Flash program memory, 2 KB of RAM, and 1 KB of EEPROM in a 28-pin SOIC package. It is AEC-Q100 qualified for automotive environments and features dedicated motor-control peripherals including MCPWM (Motor Control PWM), CTMU (Charge Time Measurement Unit), and Peripheral Pin Select (PPS), all of which enable compact, low-pin-count BLDC, PMSM, and stepper drive designs without external logic. A 16-bit microcontroller (MCU) is an embedded processor whose internal datapath, registers, and arithmetic logic unit operate on 16-bit words. Compared with 8-bit MCUs, 16-bit cores execute more instructions per MHz and address larger memory spaces with single-cycle accesses; compared with 32-bit Cortex-M devices, they consume less power, are cheaper, and provide deterministic interrupt latency for real-time motor loops. The PIC24FJ32MC102 belongs to the broader hierarchy: microcontroller -> embedded MCU -> 16-bit MCU -> PIC24F family -> motor-control sub-family. Key features include a wide operating voltage range of 3.0 V to 5.5 V (typical 3.3 V operation), an industrial-grade -40 °C to +125 °C temperature range, multiple serial interfaces (I²C, SPI, UART with IrDA and LIN support), a 10-bit ADC, and on-chip CTMU for capacitive touch and time-of-flight sensing. PPS allows nearly any digital peripheral function to be remapped onto most I/O pins, dramatically simplifying PCB layout and BOM reuse. Architecturally, the device combines a modified Harvard PIC core with a 16-bit instruction path, hardware multiply, a 17-bit × 17-bit single-cycle MAC, and a flexible oscillator block. PPS remaps peripherals at runtime, while CTMU provides constant-current source hardware for capacitive sensing and precision timing. The combination is targeted at closed-loop motor control with software-defined commutation tables and on-chip current/voltage sampling. Typical applications include BLDC ceiling fans, drone ESCs, e-bike controllers, small appliance motor drives, automotive body controllers, and LIN-bus sensor nodes. The AEC-Q100 qualification makes it attractive for under-hood and chassis modules that require extended temperature endurance. When designing with this part, confirm the motor-control firmware stack (e.g., Microchip's MPLAB X + MCC code configurator) supports the specific commutation scheme. Pay attention to PWM-timer pairing for center-aligned switching and route the analog sensing traces away from the MCPWM outputs. This page synthesizes distributor pricing, drop-in alternatives from the same SOIC-28 footprint, and practical design notes not collected in any single manufacturer datasheet.

詢價 聯絡我們
PIC24FJ32MC102-E/SS - 16-bit 32KB Flash Motor Control MCU | Microchip
PIC24FJ32MC102-E/SS

PIC24FJ32MC102-E/SS - 16-bit 32KB Flash Motor Control MCU | Microchip

The Microchip PIC24FJ32MC102-E/SS is a 16-bit microcontroller from the PIC24F motor-control family, featuring 32 KB of Flash program memory, 2 KB of SRAM, and a 16 MIPS PIC24 CPU core, housed in a 28-pin SSOP (5.30 mm) package with an extended -40C to +125C operating temperature grade. The device integrates three 6-pin MCPWM (Motor Control PWM) channels, three analog comparators, a CTMU (Charge Time Measurement Unit) for capacitive touch or general time-of-flight measurement, an RTCC, and Peripheral Pin Select (PPS) for flexible signal routing. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, data memory, and on-chip peripherals into a single chip. The PIC24FJ32MC102 belongs to the PIC24F family of 16-bit modified-Harvard RISC microcontrollers, which sits in the broader taxonomy of PIC microcontrollers -> microcontrollers -> microprocessors and controllers -> semiconductor ICs. The 16-bit architecture offers higher code density and arithmetic precision than 8-bit PIC16/PIC18 families, while remaining simpler than 32-bit ARM Cortex-M devices. Key features include 32 KB (11K x 24) self-programmable Flash, 2 KB SRAM, 16 MIPS performance from a 32 MHz internal oscillator, a 10-bit ADC with at least 6 channels, two UART/SPI/I2C configurable serial interfaces, PPS for remapping most digital peripherals, and ultra-low-power sleep modes. The 28-SSOP footprint keeps the BOM compact while still exposing the full motor-control peripheral set. The PIC24FJ32MC102 is implemented in CMOS process technology and uses Microchip's nanoWatt XLP technology for low-power operation. PPS allows designers to route the MCPWM outputs, UART, SPI, and other digital peripherals to a wide choice of I/O pins, simplifying PCB layout. The integrated CTMU enables touch sensing and precise time measurement without external analog circuitry. Typical applications include BLDC and PMSM motor control, low-cost fan and pump controllers, appliance control boards, sensor interfaces, and general-purpose 16-bit embedded control. It is also AEC-Q100 qualified for automotive motor-control subsystems such as HVAC blowers and seat-adjustment motors. When designing with this part, pay attention to VDD decoupling (place a 0.1 uF and 10 uF near each VDD/VSS pair), use the ICSP pins (PGECx/PGEDx) for in-circuit programming, and verify that any firmware using PPS re-routes pins within the constraints documented in the family reference manual. The PIC24FJ32MC102-E/SS differs from the -I/SS industrial variant only in operating-temperature grade, so firmware is portable between the two. This page synthesizes Microchip family documentation, distributor pricing, drop-in alternatives, and practical design notes not all available in the original datasheet. The information here is structured to support rapid selection by both component engineers and AI-assisted sourcing tools.

詢價 聯絡我們
PIC24FJ32MC102-E/TL - 16-bit 32KB Flash Motor Control MCU | Microchip
PIC24FJ32MC102-E/TL

PIC24FJ32MC102-E/TL - 16-bit 32KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24FJ32MC102-E/TL is a 16-bit PIC microcontroller from the PIC24F motor-control family, delivering 16 MIPS performance with 32 KB Flash program memory and 2 KB RAM in a 36-pin VTLA surface-mount package. The -E suffix indicates the extended -40 °C to +125 °C automotive temperature grade, while the /TL suffix denotes the VTLA-36 tape-and-reel package option. Core peripherals include an 8-channel 10-bit ADC, Motor Control PWMs (MCPWM), Peripheral Pin Select (PPS), and the on-chip Charge Time Measurement Unit (CTMU) for capacitive touch and precise time-domain measurements. A 16-bit microcontroller (MCU) is a programmable embedded processor that balances 32-bit class arithmetic performance with the cost and code density of a 16-bit instruction set. The PIC24F architecture belongs to the modified Harvard MCU family, sitting in the wider taxonomy of: microcontroller → embedded processor → integrated circuit → semiconductor. Compared with 8-bit MCUs, 16-bit cores deliver higher throughput (16 MIPS here), wider data paths for sensor fusion, and richer peripherals; compared with 32-bit Cortex-M parts, they typically win on cost, deterministic interrupt latency, and lower active power. The "FJ" sub-family adds hardware multiply and divide plus a flexible peripheral set aimed at real-time motor and power-conversion control. Differentiating specifications include 32 KB self-programmable Flash (11K × 24 words), 2 KB SRAM, an integrated 8 MHz internal oscillator, CTMU for time-of-flight/capacitive sensing, PPS for remapping digital peripherals to any I/O, and dedicated Motor Control PWM with complementary outputs and programmable dead time. The wide VIN (2.0 V–3.6 V) range plus on-chip low-voltage detection (LVD) and brown-out reset (BOR) supports robust field deployment. Architecturally, the device uses a modified Harvard core with separate program and data buses, a 16 × 16 hardware multiplier, and a four-deep output compare / PWM pipeline optimized for closed-loop field-oriented control (FOC) firmware. The CTMU provides a constant-current source that, combined with ADC sampling, enables on-chip temperature measurement, proximity sensing, and high-resolution time measurement. Typical applications include BLDC/PMSM motor drives (small fans, pumps, appliance motors), consumer white goods, low-cost automotive body electronics (HVAC blowers, seat fans), capacitive-touch user interfaces built on CTMU, and entry-level digital power-conversion loops. Designers often pair this MCU with gate-driver ICs and small BLDCs in 24 V battery-powered systems. When designing with this part, place a 1 µF plus 100 nF decoupling pair within 5 mm of every VDD/VCAP pin and route the analog AVdd track through a ferrite bead to maximize ADC SNR. For motor-drive PCB layouts, keep the MCPWM traces short and symmetric and isolate the high-current FET bridge from the MCU ground pour with a star-ground topology. This page synthesizes distributor pricing, drop-in / same-family PIC24F alternatives, and practical design notes not found in the manufacturer datasheet alone, making it a single-source reference for engineers and procurement teams.

詢價 聯絡我們
PIC24FJ32MC102-I/SO - 16-bit 32KB Flash Motor Control MCU | Microchip
PIC24FJ32MC102-I/SO

PIC24FJ32MC102-I/SO - 16-bit 32KB Flash Motor Control MCU | Microchip

The Microchip PIC24FJ32MC102-I/SO is a 16-bit microcontroller from the PIC24F motor-control family, delivering 16 MIPS performance and integrating 32 KB Flash with 2 KB RAM in a 28-pin SOIC package. It is designed as an ultra-low-cost, high-performance 16-bit MCU featuring CTMU (Charge Time Measurement Unit), MCPWM (Motor Control PWM), PPS (Peripheral Pin Select) and other advanced peripherals with low pin count and small footprint options. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripheral subsystems such as timers, ADC, communication controllers and PWM blocks. In the broader taxonomy, the PIC24FJ32MC102 sits as a 16-bit MCU -> 16-bit microcontroller -> microcontroller -> embedded processor -> semiconductor. Motor-control variants specifically target the precise PWM generation and analog sampling required for BLDC, PMSM, and DC brushed/brushless drives. Key features include 16 MIPS CPU throughput at 32 MHz, dedicated motor-control PWMs, an integrated 10-bit ADC, CTMU for touch or capacitive sensing, and PPS for flexible peripheral-to-pin mapping. The 32 KB self-programmable Flash and 2 KB RAM support small to medium control loops, while the 28-pin SOIC provides a generous pin budget for analog, communication, and PWM signals without resorting to smaller QFN footprints. Architecturally, the PIC24FJ32MC102 uses Microchip's modified Harvard architecture with a 16-bit data path, hardware multiplier/divider, and a 16-element working register array. The motor-control peripherals operate independently of the CPU, freeing MIPS for state-machine or communications tasks. PPS allows remapping of digital peripherals, reducing pin-out constraints on compact motor boards. Typical applications include low-voltage BLDC/PMSM motors, sensorless and Hall-sensor fan control, drone ESCs, e-bike and small EV traction control, robotic joint drives, white-goods motor control (washing-machine direct-drive pumps), and low-cost industrial servo drives. Industrial factory automation and HVAC actuators also use this family for compact closed-loop current/voltage regulation. When designing with this MCU, ensure the VDD/AVDD pair is properly decoupled and the 32 kHz secondary oscillator is configured for low-power modes. The MCPWM module's fault inputs and dead-time generators should be validated against the motor driver's safe-commutation requirements. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, enabling faster sourcing and PCB layout reuse decisions.

詢價 聯絡我們
PIC24FJ32MC102-I/SP - 16-bit 16 MIPS 32KB Flash MCU | Microchip
PIC24FJ32MC102-I/SP

PIC24FJ32MC102-I/SP - 16-bit 16 MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24FJ32MC102-I/SP is a 16-bit microcontroller from the PIC24F motor-control family, delivering 16 MIPS performance at up to 32 MHz core speed with 32 KB of Flash program memory and 2 KB of RAM, housed in a 28-pin SPDIP (SP) through-hole package. It integrates dedicated motor-control peripherals including a 6-channel Motor Control PWM (MCPWM), a 16-bit timer/counter, and a Charge Time Measurement Unit (CTMU) for capacitive touch and time-of-flight sensing, making it a cost-optimized solution for BLDC, PMSM and stepper control. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and programmable peripherals. Within the broader taxonomy, an MCU sits below microprocessor (MPU) and above specific function ICs; the PIC24F is a 16-bit Harvard-architecture MCU family from Microchip that uses modified Harvard organization with separate program and data buses, a wide 16-bit datapath, and a C-friendly instruction set. The "FJ" suffix denotes the Flash-memory, low-power variant with nanoWatt XLP deep-sleep modes; the "MC" suffix marks the motor-control peripheral subset; and the "102" ordering code indicates the 32 KB Flash / 2 KB RAM density tier. Key features include three 16-bit timers, up to 21 I/O pins with Peripheral Pin Select (PPS) remappable inputs/outputs, four 10-bit ADC channels at 500 ksps, two analog comparators, and a 5-bit DAC reference. Communication interfaces include I2C, SPI, and UART with LIN support. The device operates from 2.0 V to 3.6 V across an industrial -40 °C to +85 °C temperature range and includes a real-time clock/calendar (RTCC) module and a charge-pump regulator for battery-backup. Typical applications include low-cost BLDC and PMSM motor drives, small appliance controls, ceiling fans, pumps, valve actuators, and consumer products that need a compact MCU with integrated PWMs and ADC. The wide operating voltage and CTMU peripheral also make it suitable for sensor-interface front ends with capacitive touch input. When designing with this device, ensure your schematic respects the PPS input/output mapping table from the family reference manual and reserves the correct ICSP pins (PGECx/PGEDx). For motor-control loops exceeding 10 kHz PWM frequency at full ADC conversion load, validate ISR budget against the 16 MIPS budget before adding additional software modules. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, organized for engineers comparing motor-control MCU options.

詢價 聯絡我們
PIC24FJ32MC102-I/SS - 16-bit 16MIPS 32KB Flash Motor MCU | Microchip
PIC24FJ32MC102-I/SS

PIC24FJ32MC102-I/SS - 16-bit 16MIPS 32KB Flash Motor MCU | Microchip

The Microchip Technology PIC24FJ32MC102-I/SS is a 16-bit RISC microcontroller from the PIC24F motor-control family, delivering 16 MIPS performance at 32 MHz while consuming minimal power in a compact 28-pin SSOP package. The part integrates 32 KB of Flash program memory (11K x 24 words), 2 KB of SRAM, peripherals dedicated to motor drive (MCPWM, CTMU), and configurable peripherals via Peripheral Pin Select (PPS). Connectivity is provided through I2C, SPI, and UART interfaces. According to the Microchip datasheet for the PIC24FJ16MC101/102 and PIC24FJ32MC101/102/104 family, this device is engineered for low-cost, high-performance applications where on-chip analog and motor-control peripherals reduce external component count. A 16-bit microcontroller is a class of embedded processor featuring a 16-bit data path, 16-bit registers, and instruction-fetch widths typically between 16 and 24 bits, sitting architecturally between 8-bit MCUs (PIC16, AVR) and 32-bit Cortex-M parts. The PIC24F family in particular targets low-power, mixed-signal embedded designs, combining a modified Harvard architecture with peripheral-rich silicon tuned for sensor and actuator interfaces. Within the Microchip taxonomy, PIC24FJ32MC102 belongs to the motor-control sub-family ("MC"), which adds hardware PWM, input-capture, and charge-time measurement unit (CTMU) resources used for brushless-DC (BLDC) and stepper drive loops. Key differentiating features of the PIC24FJ32MC102-I/SS include the CTMU for capacitive-touch and time-of-flight measurement, MCPWM channels with flexible duty/period control, and PPS that allows digital peripheral mapping to nearly any I/O pin. The Flash memory is rated for endurance in typical in-application reprogramming scenarios, and the integrated 16 MIPS core enables deterministic loop execution for closed-loop control without software-cycle stretching. The 28-SSOP form factor keeps the part within low pin-count motor drive PCBs while still providing enough I/O for quadrature encoders and three-phase gate signals. Typical application scenarios include consumer BLDC fan and pump controllers, low-voltage drone ESCs, appliance motor boards, and small-format LED drivers using the CTMU for touch input. The part is also commonly designed into HVAC damper actuators, white-goods motor subsystems, and educational/hobby robotics platforms where cost per MIPS dominates the BOM. For the highest-volume designs, the 28-SSOP outline is compatible with hand-soldering and basic pick-and-place, simplifying small-batch manufacturing. When designing in this MCU, allocate at least one UART for debug, respect the VDD/VSS pin-connection rules from the datasheet (all VSS and VDD pins must be connected for programming), and review the dsPIC33/PIC24 Family Reference Manual sections for the specific peripheral you intend to use. Programming is supported through MPLAB Snap, PICkit, or ICD tools via ICSP. This page combines distributor pricing, verified drop-in alternatives from the same PIC24FJ family, and design notes not aggregated in any single manufacturer document.

詢價 聯絡我們
PIC24FJ32MC102-I/TL - 16-Bit MCU, 32KB Flash, 36-VTLA | Microchip
PIC24FJ32MC102-I/TL

PIC24FJ32MC102-I/TL - 16-Bit MCU, 32KB Flash, 36-VTLA | Microchip

The Microchip Technology PIC24FJ32MC102-I/TL is a 16-bit PIC microcontroller from the PIC24F family, delivering up to 16 MIPS at 32 MHz core speed in a compact 36-pin VTLA (5x5 mm) package. It integrates 32 KB of Flash program memory (11K x 24 words), 1 KB of RAM, and a dedicated motor-control PWM (MCPWM) peripheral alongside standard PIC24F connectivity. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals to embed control logic inside a product. The PIC24F family uses a 16-bit modified Harvard architecture with 24-bit instructions, optimized for deterministic real-time control. It sits in Microchip's lineup between the 8-bit PIC16/PIC18 and the 16-bit dsPIC33/DSPic digital-signal controllers, and is targeted at cost-sensitive motor-control and mixed-signal applications where 8-bit performance is insufficient but full DSP capability is not required. Key features include an 8-channel 10-bit Analog-to-Digital Converter (ADC) for sensor feedback, three on-chip analog comparators, a Charge Time Measurement Unit (CTMU) for capacitive touch or temperature measurement, a Real-Time Clock and Calendar (RTCC), and Peripheral Pin Select (PPS) that allows digital peripheral routing to most I/O pins. Brown-out Reset (BOR), Watchdog Timer (WDT), and Power-on Reset (POR) ensure robust operation in electrically noisy motor environments. The device uses a 2.0-3.6V core supply with on-chip 1.8V regulator and supports industrial -40C to +85C operation. PPS-based I/O mapping dramatically simplifies PCB routing when MCPWM channels, UART, and SPI/I2C share pins. The 36-pin VTLA package (5x5 mm) is Microchip's smallest MCPWM-capable variant and suits space-constrained BLDC and stepper drives. Typical applications include BLDC ceiling fans, small appliance motor drives, e-bike controllers, drone ESC prototypes, and sensor hubs. The integrated 10-bit ADC and CTMU also enable closed-loop thermal sensing in HVAC and white-goods applications. When designing, allocate an external decoupling capacitor on every VDD/AVDD pair and follow Microchip's errata for the PIC24FJ32MC101/102/104 family. For long-life or automotive designs, consider the AEC-Q100-qualified PIC24FJ32MC102 variants.

詢價 聯絡我們
PIC24FJ32MC102T-E/ML - 16-bit 32KB Flash Motor Control MCU | Microchip
PIC24FJ32MC102T-E/ML

PIC24FJ32MC102T-E/ML - 16-bit 32KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24FJ32MC102T-E/ML is a 16-bit, 16 MIPS Flash microcontroller from the PIC24F family, housed in a 28-pin VQFN (ML, 6x6 mm) package with exposed thermal pad. The 'T' suffix denotes Tape & Reel packaging, and the 'E' suffix indicates an extended temperature grade. The device integrates 32 KB of Flash program memory (11K x 24 words), up to 2 KB of data RAM, and 21 general-purpose I/O pins with Peripheral Pin Select (PPS) flexibility. What is a PIC24F microcontroller? A PIC24F microcontroller is a 16-bit modified-Harvard RISC MCU from Microchip that sits between 8-bit PIC16/PIC18 devices and the higher-end dsPIC/PIC32 families. The PIC24FJ32MC102 specifically belongs to the motor control sub-family, integrating dedicated peripherals such as Motor Control PWM (MCPWM) modules, three on-chip comparators, a Charge Time Measurement Unit (CTMU), and a Real-Time Clock/Calendar (RTCC). It is designed for low-cost, high-performance digital motor control in compact, low-pin-count packages. Key features include an internal oscillator with PLL, multiple communication peripherals (I2C, SPI, UART with IrDA and LIN support), and 10-bit ADC capability. The 16 MIPS performance enables field-oriented control (FOC) algorithms on small brushless DC and PMSM motors. The exposed-pad VQFN-28 package provides a low-thermal-resistance path, supporting sustained PWM switching at full motor drive loads. Typical applications include low-voltage brushless DC (BLDC) and PMSM motor drives, sensorless and sensored fan/pump controllers, appliance and HVAC blower controls, e-bike hub motor drivers, and small industrial servo control boards. The AEC-Q100 qualification and extended temperature range make it well suited for automotive body electronics and under-hood subsystems. When developing with this part, allocate PCB copper under the exposed pad to dissipate MCPWM switching losses. Use the PPS feature to remap peripherals to free GPIOs when adding sensors, and reserve at least three timer channels for freewheeling diode timing in active rectification stages. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical motor-control design notes not consolidated in the manufacturer datasheet.

詢價 聯絡我們
PIC24FJ32MC102T-I/ML - 16-bit 16MIPS 32KB Flash MCU | Microchip
PIC24FJ32MC102T-I/ML

PIC24FJ32MC102T-I/ML - 16-bit 16MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24FJ32MC102T-I/ML is a 16-bit PIC24F microcontroller from the motor-control-focused MC family, featuring a 16 MIPS modified Harvard core, 32 KB (11K x 24) of Flash program memory, 2 KB of SRAM, and a 28-pin QFN (6x6 mm) package. It targets cost-sensitive motor-control and general-purpose embedded designs that need on-chip motor-control peripherals in a small footprint. A 16-bit MCU (microcontroller) is an integrated circuit combining a CPU core, non-volatile program memory (Flash), volatile data memory (SRAM), and a rich peripheral set on a single die. The PIC24F sits in the hierarchy: 16-bit MCU -> Flash MCU -> motor-control MCU -> PIC24F MC family -> embedded controller, balancing deterministic real-time control with low power consumption. Key features include 16 MIPS performance from the 32 MHz oscillator with 2:1 speed divide, hardware motor-control peripherals (MCPWM, 6 outputs), a 10-bit ADC with up to 9 channels, CTMU (Charge Time Measurement Unit) for touch and capacitive sensing, PPS (Peripheral Pin Select) for flexible signal routing, and 21 general-purpose I/O pins. The integrated motor-control PWM simplifies three-phase BLDC and brushless DC drive loops, while the CTMU enables touch-button front panels without an external analog front end. The architecture uses a 16-bit modified-Harvard bus with separate program and data paths, a 17 x 17 hardware multiplier, and a barrel shifter that accelerates DSP-style routines. PPS allows remapping of digital peripherals to most I/O pins, simplifying PCB layout and reducing trace congestion in dense 28-pin QFN designs. Typical applications include low-voltage BLDC fan and pump motor controllers, small appliance drives, sensor interfaces, and capacitive-touch user panels. The wide operating voltage range and small QFN footprint make it suitable for space-constrained consumer and industrial modules. When designing with this MCU, allocate sufficient PCB copper under the exposed pad for thermal dissipation and follow Microchip's recommended decoupling scheme with a 10 uF bulk and 0.1 uF ceramic on each supply pair. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
PIC24FJ32MC102T-I/SS - 16-bit 32KB Flash MCU | Microchip | Motor Control
PIC24FJ32MC102T-I/SS

PIC24FJ32MC102T-I/SS - 16-bit 32KB Flash MCU | Microchip | Motor Control

The Microchip PIC24FJ32MC102T-I/SS is a 16-bit microcontroller from the PIC24F motor-control family, featuring 32 KB of Flash program memory, 2 KB of SRAM, and a 16 MIPS performance core in a 28-pin SSOP package. The integrated Motor Control PWM (MCPWM), three analog comparators, CTMU, RTCC, and Peripheral Pin Select (PPS) make this device a compact solution for sensorless and sensored motor drive designs. It operates from 3.0 V to 3.6 V and supports an industrial temperature range of -40C to +85C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and programmable peripherals on one die. The PIC24F family uses a 16-bit modified Harvard architecture, sitting hierarchically as a mid-range 16-bit MCU -> general-purpose microcontroller -> embedded controller -> semiconductor. Within the PIC24F umbrella, the 'MC' sub-family specifically targets motor-control applications by combining a fast PWM peripheral with high-speed analog comparators that can be used for back-EMF sensing, current-shunt amplification, and fault detection. Key features of the PIC24FJ32MC102T-I/SS include: 6 dedicated MCPWM channels with complementary outputs and dedicated time bases for 3-phase or full-bridge motor drive; 3 on-chip analog comparators with programmable reference for overcurrent/overvoltage protection; Charge Time Measurement Unit (CTMU) for capacitive touch, mTouch sensing, and time-of-flight measurements; Real-Time Clock Calendar (RTCC) with battery backup switchover for timekeeping; PPS (Peripheral Pin Select) for flexible I/O routing that simplifies PCB layout. The 32 KB Flash supports self-programming, and the 2 KB RAM is sufficient for control loops and small protocol stacks. Architecturally, the PIC24FJ32MC102 uses a 16-bit instruction set with single-cycle execution for most instructions, an 8-channel 10-bit ADC with 500 ksps conversion rate, and multiple serial interfaces including UART, SPI, I2C, and IrDA. The device is well suited for cost-sensitive brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) controllers where the integration of analog comparators directly into the PWM peripheral reduces the need for external analog components. Typical applications include ceiling fans, washing-machine pumps, small appliances, e-bike controllers, low-power HVAC blowers, and sensorless BLDC ceiling-fan drives. The combination of CTMU and MCPWM is also used in low-end robotic actuator and toy-grade servo drive designs. When designing with this part, note that the MCPWM channel count and timer structure differ between the PIC24FJ32MC101 (3 PWMs) and PIC24FJ32MC102 (6 PWMs / 3 complementary pairs). Always reserve a logic-analyzer or ICD header for in-circuit debugging - the PPS feature can be remapped, but JTAG/ICSP pins are fixed. This page synthesizes distributor pricing, drop-in same-family variants, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
PIC24FJ32MC104-E/PT - 16-bit Motor Control MCU, 32KB Flash | Microchip
PIC24FJ32MC104-E/PT

PIC24FJ32MC104-E/PT - 16-bit Motor Control MCU, 32KB Flash | Microchip

The Microchip Technology PIC24FJ32MC104-E/PT is a 16-bit microcontroller from the PIC24F motor-control family, offering 32 KB of Flash program memory, 2 KB of SRAM, and 16 MIPS CPU performance from a 32 MHz internal oscillator, housed in a 44-pin TQFP (PT) package. It is specified for the -40C to +125C extended automotive temperature range and qualified to the AEC-Q100 standard, making it suitable for harsh-environment motor control applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and a rich set of peripherals such as timers, ADC, communication interfaces, and I/O ports on one die. Within the broader embedded hierarchy, this part belongs to the 16-bit MCU class -> microcontroller -> embedded processor -> semiconductor IC. Motor-control MCUs like the PIC24FJ32MC104 extend the general-purpose MCU concept by adding dedicated PWM generators, fast ADC, and analog comparators that close the loop around power-converter or motor-driver stages. Key features include three 16-bit MCPWM (Motor Control PWM) channels with complementary outputs and programmable dead-time, a 10-bit ADC with at least 500 ksps conversion rate, three on-chip analog comparators for back-EMF or current sensing, a Charge Time Measurement Unit (CTMU) for capacitive touch or temperature sensing, Peripheral Pin Select (PPS) for flexible signal routing, and a Real-Time Clock and Calendar (RTCC) with calendar mode. The 16 MIPS core runs most instructions in one cycle, giving deterministic control-loop timing for sensorless and sensored BLDC/PMSM drives. Architecturally the device uses a 16-bit modified-Harvard RISC core with a 24-bit instruction word, a hardware multiplier for single-cycle MAC operations, and direct memory-mapped peripheral access. The MCPWM block supports edge-aligned, center-aligned, and variable-phase PWM, which is essential for field-oriented control. PPS allows remapping of digital peripherals to most I/O pins, simplifying PCB layout and reducing routing congestion. Typical applications include 3-phase BLDC and PMSM motor drives, sensored and sensorless fan and pump controllers, low-cost ceiling fans, e-bike and e-scooter controllers, appliance motor control boards, and general industrial automation. The -E extended temperature and AEC-Q100 qualification also support automotive body and HVAC actuators. Designers should budget for the external analog supply filter and ensure the on-chip voltage regulator is decoupled with at least a 10 uF bulk plus a 0.1 uF ceramic capacitor close to the VDD/VSS pair. PWM dead-time programming should be set greater than the power-stage turn-off delay to avoid shoot-through in half-bridge drivers. This page synthesizes distributor pricing, drop-in same-family alternatives, AEC-Q100 qualification notes, and practical design considerations that go beyond the manufacturer datasheet summary.

詢價 聯絡我們
PIC24FJ32MC104-E/TL - 16-bit 32KB Flash Motor Control MCU | Microchip
PIC24FJ32MC104-E/TL

PIC24FJ32MC104-E/TL - 16-bit 32KB Flash Motor Control MCU | Microchip

The Microchip PIC24FJ32MC104-E/TL is a 16-bit PIC24F microcontroller purpose-built for low-cost, high-performance motor control, offering 32KB of Flash program memory, 2KB of SRAM, and a 16 MIPS core running at 32 MHz. Packaged in a 44-pin VTLA (6x6 mm) surface-mount LGA/QFN-style land-grid array, the device integrates advanced motor-control peripherals including Motor Control PWMs (MCPWM), a Charge Time Measurement Unit (CTMU), and Peripheral Pin Select (PPS) for flexible signal routing on a low-pin-count footprint. A 16-bit microcontroller (MCU) is a single-chip processor that combines a 16-bit CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a rich set of on-chip peripherals such as timers, ADCs, communication interfaces, and PWM channels. The PIC24F family sits within Microchip's broader taxonomy of PIC microcontroller -> 16-bit MCU -> motor-control MCU -> power-conversion and motion-control subsystem, and is widely used in appliances, fans, pumps, small drones, and consumer-embedded systems. Key features include 16 MIPS performance at 32 MHz, 32KB Flash (11K x 24 words), 2KB SRAM, an integrated MCPWM with dedicated fault inputs, multiple 16-bit timers, a 10-bit A/D converter, and CTMU support for capacitive touch and current measurement. PPS allows most digital peripherals to be remapped to a wide range of I/O pins, simplifying PCB routing in compact motor-drive layouts. The CTMU enables time-based current sensing and touch sensing without external analog front-ends. Architecturally, the PIC24FJ32MC104-E/TL uses a modified Harvard architecture with a 16-bit data path, hardware multiplier, and deterministic interrupt latency, which is essential for closed-loop field-oriented control (FOC) and trapezoidal commutation. The MCPWM block includes independent duty-cycle and period registers plus a dedicated PWM fault input that can shut down outputs within one PWM cycle when an overcurrent event is detected by an external comparator. Typical applications include BLDC and PMSM motor control, sensorless fan and pump drivers, small appliance motor boards (mixers, blenders, hair tools), RC servo and drone ESC prototypes, and general-purpose low-pin-count industrial control. The wide operating voltage range and on-chip CTMU also enable capacitive user-interface buttons alongside the motor drive. When designing with this device, place bypass capacitors (100 nF ceramic plus 4.7 uF or 10 uF bulk) within 5 mm of every VDD/VSS pair and ensure the exposed thermal pad is soldered to a continuous ground plane for thermal dissipation. Use the dedicated PWM fault pin to gate the MCPWM outputs whenever a hardware overcurrent trip occurs, never rely solely on firmware to disable the inverter. This page synthesizes distributor pricing, drop-in alternatives in the same 44-VTLA footprint, and practical motor-control design notes not found in a single manufacturer datasheet, giving engineers a one-stop reference for sourcing and qualifying PIC24FJ32MC104-E/TL.

詢價 聯絡我們
PIC24FJ32MC104-I/ML - 16-bit 16 MIPS 32KB Flash Motor MCU | Microchip
PIC24FJ32MC104-I/ML

PIC24FJ32MC104-I/ML - 16-bit 16 MIPS 32KB Flash Motor MCU | Microchip

The Microchip Technology PIC24FJ32MC104-I/ML is a 16-bit microcontroller from the PIC24F motor-control family, delivering 16 MIPS performance with 32 KB of Flash and 2 KB of SRAM in a 44-pin QFN (8x8 mm) package. Designed for ultra-low-cost, high-performance embedded motor control, it integrates dedicated motor-control peripherals such as MCPWM (Motor Control PWM), CTMU (Charge Time Measurement Unit), and PPS (Peripheral Pin Select) on a small 8x8 mm footprint. The device operates from a 3.3 V supply and is qualified for the -40C to +85C industrial temperature range. A PIC24F microcontroller is a 16-bit RISC MCU family from Microchip Technology that combines the legacy PIC16/PIC18 peripheral ecosystem with a 16-bit modified-Harvard core running up to 16 MIPS. Within the broader microcontroller taxonomy, PIC24F sits above PIC18 (8-bit) and below dsPIC33/PIC32 (32-bit), making it a mid-tier 16-bit solution for cost-sensitive, deterministic real-time control tasks. Motor-control variants like the PIC24FJ32MCxxx add dedicated PWM and analog front-end peripherals tuned for BLDC, PMSM, and stepper drive loops. The 44-QFN option keeps the BOM compact while exposing the full peripheral set. Key features include 32 KB (11K x 24) self-programmable Flash, 2 KB SRAM, 5 MCPWM channels with dedicated fault inputs, 10-bit ADC up to 500 ksps, 2 analog comparators with programmable reference, CTMU for capacitive touch or time-of-flight, UART/SPI/I2C, and PPS for flexible pin mapping. The 16 MIPS core supports C and assembly development under MPLAB X IDE with the XC16 compiler. On-chip debug is provided through the standard 2-wire ICD interface. Typical applications include BLDC/PMSM sensorless fan and pump controllers, small appliance drives, RC servo control, low-power sensor hubs with capacitive touch, and cost-optimized industrial control loops. The QFN-44 footprint is well suited for board-space-constrained designs where thermal dissipation is also acceptable. When designing with the PIC24FJ32MC104-I/ML, place a 10 uF plus 0.1 uF decoupling pair near VDD, route the analog AVdd/AVss pair through a ferrite bead or filter, and follow Microchip's motor-control reference design layout for the MCPWM outputs to keep switching noise away from the CTMU/ADC paths. This page synthesizes distributor pricing, same-family drop-in alternatives (PIC24FJ32MC102, PIC24FJ32MC101), and practical motor-control design notes not consolidated on the manufacturer datasheet.

詢價 聯絡我們