積體電路

子分類

📁 ADC/DAC 3,100+ 產品 📁 放大器 IC 1,700+ 產品 📁 音訊編解碼器 18 產品 📁 音訊 IC 2 產品 📁 時脈與計時 640+ 產品 📁 Comparator ICs 1 產品 📁 DSP 1,100+ 產品 📁 資料擷取 IC 2 產品 📁 數位電位器 4 產品 📁 顯示驅動器與控制器 1 產品 📁 FPGA 與 CPLD 7,100+ 產品 📁 介面 IC 3,100+ 產品 📁 LED 驅動器 1 產品 📁 邏輯 IC 450+ 產品 📁 記憶體 IC 870+ 產品 📁 微控制器 20,000+ 產品 📁 微處理器 4 產品 📁 馬達驅動器 1 產品 📁 其他 1 產品 📁 感測器與偵測器介面 1 產品 📁 特殊用途 IC 15 產品 📁 視訊 IC 13 產品

產品（38,000+)

STM8L151R6T6 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics
STM8L151R6T6

STM8L151R6T6 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics

STMicroelectronics STM8L151R6T6 is an 8-bit ultra-low-power microcontroller with a 16 MHz clock, 32 KB of Flash program memory, and a 64-pin LQFP package measuring 10 mm by 10 mm. It is designed for compact embedded systems that require low power consumption, efficient peripheral integration, and a broad supply-voltage range of 1.8 V to 3.6 V. An ultra-low-power microcontroller is a semiconductor device optimized to complete sensing, control, communication, and monitoring tasks while minimizing energy use during both active and standby operation. Within the device hierarchy, the STM8L151R6T6 belongs to the STM8L family, combines an 8-bit STM8 CPU core with embedded Flash memory, and provides a dedicated platform for low-power embedded control rather than high-performance computing. The device provides 32 KB of Flash memory, 16 MHz maximum clock speed, and 41 I/O ports according to its product data. Its operating voltage extends from 1.8 V to 3.6 V, allowing use in battery-powered products, portable instruments, industrial controls, and consumer equipment. The LCD-related designation identifies its suitability for applications involving display interfaces, while its 64-LQFP package exposes a substantial number of pins for external sensors, actuators, communication interfaces, and mixed-signal connections. Because this is an 8-bit MCU, its computational resources are best suited to control logic, state machines, data acquisition, display handling, and communication rather than intensive graphics, high-bandwidth signal processing, or large operating systems. The 16 MHz clock supports deterministic peripheral timing and responsive application code, while Flash memory provides enough space for embedded firmware and application routines. Typical applications include low-power sensor nodes, compact industrial monitoring equipment, battery-operated meters, portable measurement products, display-equipped control panels, and compact consumer appliances. The combination of low-power operation, 32 KB Flash memory, and 41 I/O ports supports designs that need flexible external connectivity without requiring a large microcontroller package. Board design should follow the manufacturer pinout and pin-description tables exactly. Pay particular attention to supply decoupling, unused-pin treatment, programming access, oscillator requirements, and exposed-pad or thermal-layout guidance applicable to the selected LQFP variant. Confirm the complete electrical limits and peripheral configuration in the manufacturer datasheet before releasing a production schematic. This page organizes the verified electrical identity, lifecycle status, package data, and source links for STM8L151R6T6 while adding application-oriented design guidance, sourcing questions, and same-family replacement analysis. These engineering aids help buyers distinguish configuration and temperature-range changes before approving a substitution.

詢價 聯絡我們
STM8L151R8T3 - 16MHz 64KB MCU | STMicroelectronics
STM8L151R8T3

STM8L151R8T3 - 16MHz 64KB MCU | STMicroelectronics

The STMicroelectronics STM8L151R8T3 is an ultra-low-power 8-bit STM8L EnergyLite microcontroller with a 16 MHz CPU, 64 KB of embedded Flash memory, integrated EEPROM, and a 64-pin LQFP package measuring 10 mm by 10 mm. It operates from 1.8 V to 3.6 V and combines low-power sensing and control capabilities with a 12-bit ADC and up to 54 I/O ports. An ultra-low-power microcontroller is an integrated circuit optimized to minimize energy consumption while executing embedded control, measurement, communications, and interface tasks. The STM8L15xx family belongs to the STM8L EnergyLite architecture and is designed for battery-operated sensors, compact industrial controls, portable instruments, and connected products that must retain processing capability while spending little time in active or standby modes. The STM8L151R8T3 combines a maximum 16 MHz enhanced STM8 CPU core with 64 KB Flash and 4 KB EEPROM. Its 12-bit ADC supports embedded analog measurement, while the high I/O count allows multiple digital inputs, outputs, communications interfaces, and external peripheral connections. The 1.8 V to 3.6 V operating range accommodates low-voltage sensor, metering, industrial, and consumer equipment. The LQFP-64 package provides 54 I/O positions and a 10 mm by 10 mm body, making it practical for prototype boards and multiline industrial-control products. Its performance profile is suited to real-time control loops that do not require a 32-bit Cortex-M core but benefit from fast 8-bit execution, embedded nonvolatile data storage, and a broad set of GPIO resources. Integrated EEPROM can retain configuration and calibration values without occupying external Flash space. Typical uses include low-energy environmental monitoring, compact motor and actuator controllers, industrial sensor nodes, portable measurement instruments, access-control equipment, and low-power data-acquisition systems. In each case, the device can combine analog sensing and control logic in a single package while supporting multiple digital interfaces and serial communications. PCB design should preserve clean supply distribution, short analog-signal paths, and stable grounding around the ADC inputs. Place decoupling capacitors close to the supply pins, route high-current or switching signals away from sensitive analog traces, and consult the STM8L151R8 pin and package documentation before assigning every LQFP position. Verify the required clock, reset, programming, and peripheral functions against the device pin table. This product page combines manufacturer and distributor specifications, practical application guidance, verified lifecycle information, and engineering-focused selection criteria. It also distinguishes exact ordering information from broader series-level claims so that engineers can assess the STM8L151R8T3 for low-power embedded designs without relying on a simple catalog summary.

詢價 聯絡我們
STM8L151R8T6 - 16MHz 8-Bit 64KB Flash MCU | STMicroelectronics
STM8L151R8T6

STM8L151R8T6 - 16MHz 8-Bit 64KB Flash MCU | STMicroelectronics

The STMicroelectronics STM8L151R8T6 is an ultra-low-power 8-bit STM8L EnergyLite microcontroller with a 16 MHz maximum core frequency, 64 KB of Flash program memory and 4 KB of RAM, housed in a 64-LQFP 10 x 10 mm package. It operates across a 1.8 V, 2.5 V or 3.3 V supply range and is designed for battery-operated, sensor-driven and connected embedded products. STM8L microcontrollers belong to the 8-bit microcontroller and energy-management MCU hierarchy, combining an enhanced STM8 CPU core with low-power operating modes, LCD-oriented peripherals and integrated analog resources. Their role in a system is to execute local control and measurement functions while keeping current consumption low enough for long operating life from a compact energy source. Key characteristics include 64 KB of embedded Flash, 4 KB of SRAM, a maximum clock frequency of 16 MHz and a 64-LQFP package. The STM8L151R8 family is positioned for applications requiring a balance of processing capability, low standby consumption and compact package size. The provided manufacturer and distributor references identify the device as part of the STM8L151x6/8 ultra-low-power family, which also includes STM8L152 and STM8L162 variants. The STM8L151R8T6 is suitable for energy-harvesting meters, industrial sensor nodes, wearable accessories, low-power control panels and small portable instruments. Because the device supports low-voltage operation and an LCD-oriented feature set, it can reduce the need for external components in display-driven designs. Its 64-LQFP outline also provides more I/O than the smaller STM8L151K6 package for designs requiring multiple external connections. When designing around this MCU, verify the exact operating voltage, pin multiplexing, clock configuration and low-power mode entry procedure against the STM8L151x6/8 datasheet. The STM8L151R8T6 is supplied in a tray-oriented ordering code, while STM8L151R8T6TR is the tape-and-reel ordering variant shown in distributor listings. The distinction between ordering formats is commercial rather than a change in the underlying device. This page combines verified manufacturer and distributor information with practical package, sourcing and design guidance. It also highlights the limits of the available data: detailed pin names, electrical timing curves, lifecycle declarations and volume pricing must be confirmed from the current manufacturer datasheet and authorized distributor inventory before a production release.

詢價 聯絡我們
STM8L152C4T3 - 16MHz 16KB Flash Ultra-Low-Power MCU | STMicroelectronics
STM8L152C4T3

STM8L152C4T3 - 16MHz 16KB Flash Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L152C4T3 is an ultra-low-power 8-bit microcontroller with a 16 MHz clock, 16 KB of Flash program memory, and a 48-pin LQFP package measuring 7 x 7 mm. It operates from a 1.8 V to 3.6 V supply and provides 41 I/O ports, making it suitable for compact, low-power embedded systems that require substantial peripheral integration. An ultra-low-power microcontroller is an energy-efficient integrated circuit designed to conserve battery energy by combining low-leakage operation, low-power operating modes, and selective peripheral activation. The STM8L family belongs to the broader hierarchy of 8-bit MCU, microcontroller, embedded processor, and semiconductor products used in sensing, metering, control, communications, and human-interface applications. The STM8L152C4T3 combines 16 KB of Flash memory with an integrated real-time clock and LCD controller. Its documented peripheral set also includes timers, USART, I2C, SPI, ADC, DAC, and comparators. These resources allow a designer to implement local sensing, display control, data acquisition, serial communication, and actuator drive functions without relying on several separate discrete devices. Its 16 MHz operating clock provides dedicated processing performance for low-complexity control tasks, while the 41 available I/O ports support compact user interfaces and mixed analog and digital connections. The 1.8 V to 3.6 V operating range accommodates low-voltage battery-powered designs as well as 3.3 V industrial or embedded systems. Component selection should include checking the complete pin description and electrical limits in the manufacturer pinout and datasheet. Typical uses include battery-powered environmental sensors, compact energy meters, industrial control modules, instrument-panel controllers, low-power data loggers, and connected sensing nodes. The LCD controller and real-time clock are especially useful when the design requires a local display and timekeeping without continuously powering a larger processor or display subsystem. PCB design should preserve the required decoupling arrangement, connect unused pins according to the manufacturer guidance, and route high-impedance or sensitive analog signals away from fast-switching nodes. Low-power designs must also account for board leakage, pull-up resistance, and the operating mode selected by firmware, because external circuitry can dominate the final sleep-mode current. This page consolidates the exact orderable MPN, electrical attributes, package information, application guidance, and qualified same-family alternatives into one engineering reference. It also identifies the documentation needed to verify pin assignment, peripheral multiplexing, firmware support, and lifecycle status before a design is released to production.

詢價 聯絡我們
STM8L152C4U6 - 16MHz, 16KB Low-Power MCU | STMicroelectronics
STM8L152C4U6

STM8L152C4U6 - 16MHz, 16KB Low-Power MCU | STMicroelectronics

STMicroelectronics STM8L152C4U6 is an ultra-low-power 8-bit microcontroller rated at 16MHz, with 16KB of embedded Flash memory and a 48-pin UFQFPN package measuring 7 x 7mm. It belongs to the STM8L151x4/6 and STM8L152x4/6 medium-density device group, combining an 8-bit architecture with LCD, RTC, communication, analog, and timing resources for compact embedded systems. The device is positioned for applications that require low-power operation, broad peripheral integration, and a space-efficient surface-mount footprint. An ultra-low-power microcontroller is an embedded processing device designed to maintain useful operation while minimizing energy consumption during active and sleep states. The STM8L family sits within the hierarchy of low-power 8-bit microcontrollers, embedded controllers, and general-purpose semiconductors. This positioning makes the STM8L152C4U6 suitable for metering, sensing, access-control, industrial control, consumer accessories, and connected low-power equipment in which battery life, display support, and mixed analog/digital functions matter. The manufacturer identifies the STM8L152C4U6 as an 8-bit MCU with 16KB Flash, 16MHz operation, and a 48-UFQFPN package. Its documented feature set includes an RTC, 1KB data EEPROM, LCD support, timers, USART, I2C, SPI, ADC, DAC, and comparators. These resources can reduce external component count by consolidating communications, display control, data acquisition, and low-level timing into one device. The 16KB Flash configuration is suitable for compact control firmware that does not require the storage capacity of the larger members in the same family. The STM8L architecture integrates an 8-bit CPU, memory, and multiple peripheral blocks on a single die. Its communication peripherals support serial links to sensors, transceivers, displays, and other embedded controllers, while the ADC, DAC, and comparators extend the device beyond basic digital logic control. The RTC provides timekeeping for data logging and scheduled operations, and the LCD interface is particularly useful in segmented-display products. Pin-count and exact peripheral availability should be checked against the manufacturer pin description before assigning board functions. Typical uses include low-energy sensor nodes, compact industrial controllers, portable measurement equipment, LCD-driven utility meters, access terminals, and battery-assisted appliances. In a sensor-node design, the MCU can gather analog measurements, filter them digitally, timestamp them through the RTC, and transmit results through I2C, SPI, or USART. In a display-oriented product, the LCD interface can reduce parallel-display driver requirements while the timers and comparators support background measurement or threshold functions. PCB planning should reserve the 48-pin UFQFPN land pattern, confirm exposed-pad requirements, and follow the manufacturer recommendations for decoupling and signal routing. Place input and output capacitors close to their associated supply pins, provide a stable clock implementation, and keep analog and communication routes away from noisy switching nodes. Firmware and peripheral allocation should be checked against the target device's 16KB Flash limit before enabling multiple complex functions. This product page consolidates the manufacturer's core device identification, family positioning, package information, peripheral capabilities, pinout caveat, drop-in family comparisons, and practical PCB guidance into one engineering-focused reference. It also distinguishes confirmed device facts from parameters that require confirmation in the manufacturer datasheet, helping engineers evaluate the STM8L152C4U6 before schematic capture and PCB layout.

詢價 聯絡我們
STM8L152C6T6 - 8-bit Ultra-Low-Power MCU 32KB Flash | STMicroelectronics
STM8L152C6T6

STM8L152C6T6 - 8-bit Ultra-Low-Power MCU 32KB Flash | STMicroelectronics

The STM8L152C6T6 is an 8-bit ultra-low-power microcontroller from STMicroelectronics' STM8L EnergyLite family, featuring a 16 MHz STM8 core, 32 KB of Flash memory, 2 KB of RAM, and 1 KB of data EEPROM. It is housed in a 48-pin LQFP (7x7 mm) package and operates over a supply voltage range of 1.8V to 3.6V, with a temperature range of -40°C to 125°C. This device integrates a rich set of peripherals including an LCD driver, real-time clock (RTC), timers, USART, I2C, SPI, 12-bit ADC, 12-bit DAC, and comparators, making it ideal for battery-powered and energy-sensitive applications. An 8-bit microcontroller is a single-chip computer with an 8-bit data bus, executing instructions on 8-bit words. It typically integrates a CPU, memory (Flash, RAM, EEPROM), and peripherals (timers, communication interfaces, ADC) on a single die. In the system hierarchy, an 8-bit MCU sits below 16-bit and 32-bit MCUs in processing power but excels in ultra-low-power operation and cost-effectiveness for simple control tasks. The STM8L152C6T6 belongs to the STM8L ultra-low-power family, which is designed for applications where energy efficiency is paramount, such as portable medical devices, smart meters, and wireless sensor nodes. Key features of the STM8L152C6T6 include its ultra-low-power modes (Halt, Active-Halt, Wait) with current consumption as low as 0.35 µA in Halt mode, a 16 MHz CPU clock, and a 12-bit ADC with up to 28 channels. The integrated LCD driver supports up to 4x28 segments, enabling direct connection to segment LCDs without external drivers. The device also includes a true data EEPROM with up to 1 KB, allowing non-volatile data storage without external memory. The RTC provides accurate timekeeping with a separate clock domain, and the multiple communication interfaces (USART, I2C, SPI) facilitate connectivity with sensors and other peripherals. From a technical architecture perspective, the STM8L152C6T6 is built on a Harvard architecture with a 3-stage pipeline, achieving up to 16 MIPS at 16 MHz. The core includes an 8-bit accumulator, 16-bit index registers, and a 16-bit stack pointer, with a rich instruction set optimized for C and assembly programming. The device features a flexible clock system with multiple internal and external oscillator options, including a low-speed internal RC oscillator for low-power operation. The power management unit provides multiple low-power modes and a programmable voltage detector, enabling fine-grained control over energy consumption. Typical applications for the STM8L152C6T6 include smart meters (electricity, water, gas), portable medical devices (glucose meters, pulse oximeters), remote controls, and battery-powered sensor nodes. Its ultra-low-power consumption and integrated LCD driver make it particularly well-suited for devices that require long battery life and direct LCD display. The device is also used in industrial control and home automation systems where reliability and low power are critical. When designing with the STM8L152C6T6, engineers should pay attention to the power supply decoupling, placing a 100 nF capacitor close to each VDD pin and a 1 µF capacitor on the main supply. The VDDA pin should be connected to VDD through a ferrite bead to reduce noise for the ADC. Additionally, the LCD driver requires a charge pump capacitor (typically 100 nF) between the VLCD pin and ground, and the RTC requires a 32.768 kHz crystal for accurate timekeeping. Proper layout of the crystal and decoupling capacitors is essential for reliable operation.

詢價 聯絡我們
STM8L152C6U3 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics
STM8L152C6U3

STM8L152C6U3 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics

STMicroelectronics STM8L152C6U3 is an ultra-low-power 8-bit microcontroller with a 16 MHz maximum clock, 32 KB of Flash memory and 2 KB of RAM in a 48-pin UFQFPN package. It belongs to the STM8L EnergyLite family, combining an 8-bit CPU with low-power design features for compact embedded systems. The device includes 1 KB of data EEPROM, an LCD controller, timers, USART, I2C, SPI, ADC, DAC and comparators. What is an ultra-low-power microcontroller? An ultra-low-power MCU is a semiconductor controller designed to maintain useful processing, sensing and communication functions while minimizing energy consumption. The STM8L152C6U3 is positioned within the STM8L product hierarchy: STM8L152 series, STM8L EnergyLite family, 8-bit microcontroller, embedded processor and power-conscious system controller. This makes it suitable for products that spend substantial time in low-activity operating states, such as portable instruments, sensor nodes and battery-operated equipment. The STM8L152C6U3 provides a useful combination of general-purpose peripherals and dedicated analog and display functions. Its LCD interface can reduce the need for external display-control hardware, while the ADC, DAC and comparators support measurement, signal conditioning and threshold-based control. USART, I2C and SPI interfaces allow connection to sensors, memories, displays and other digital peripherals. The 32 KB Flash capacity provides room for application firmware, while the 1 KB EEPROM supports nonvolatile parameter storage. The 16 MHz operating speed and 2 KB RAM are appropriate for embedded control tasks that require responsive peripheral handling without a high-performance processor core. The 48-pin UFQFPN package exposes a substantial set of I/O and peripheral connections while remaining designed for surface-mount assembly. Applications include low-power sensor nodes, industrial instrumentation, medical monitoring equipment, smart meters, access-control systems and LCD-based user interfaces. Designers should verify the exact peripheral pin assignments, clock configuration, low-power modes, operating voltage limits and exposed-pad requirements in the manufacturer datasheet. The UFQFPN thermal pad and PCB copper layout are important for reliable assembly and heat spreading. Firmware should also account for wake-up sources, RTC behavior, analog reference requirements and the distinction between run, standby and shutdown current budgets.

詢價 聯絡我們
STM8L152C6U6 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics
STM8L152C6U6

STM8L152C6U6 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L152C6U6 is an ultra-low-power 8-bit microcontroller operating at up to 16 MHz, with 32 KB of Flash memory and a 48-pin UFQFPN package measuring 7 mm by 7 mm. It belongs to the STM8L EnergyLite family and integrates an RTC, LCD controller, timers, USART, I2C, SPI, ADC, DAC, and comparators for compact embedded-control designs. A microcontroller is a programmable integrated circuit that combines a CPU core, memory, peripherals, and input/output interfaces on one device. The STM8L152C6U6 occupies the MCU → embedded controller → low-power microcontroller hierarchy and is designed to manage sensors, communications, displays, and control functions while minimizing energy consumption in battery-operated equipment. Verified product information identifies a 32 KB Flash configuration, 1 KB data EEPROM, 16 MHz maximum clock, and a 48-pin UFQFPN package. The integrated RTC and LCD support are especially useful for panel-based products, while USART, I2C, and SPI provide options for external sensors, transceivers, memory, and host connectivity. The ADC, DAC, and comparators broaden the device's usefulness for signal conditioning and threshold-based control. The STM8L152C6U6 is positioned for low-power embedded systems where an 8-bit architecture, compact package, and broad peripheral set are more appropriate than a high-performance application processor. Its feature set can reduce external component count by combining control, communication, analog conversion, timing, and display functions in one device. The manufacturer's product page identifies the device as a member of the STM8L ultra-low-power 8-bit family. Typical applications include battery-powered sensor nodes, industrial sensing modules, compact HMI controllers, meter and instrument electronics, communication equipment, and low-power embedded products. The 7 mm by 7 mm package supports dense PCB layouts, but pin assignment, exposed-pad requirements, power routing, and peripheral multiplexing must be checked against the manufacturer datasheet before layout release. For a new design, use the official STMicroelectronics documentation to confirm supply-voltage limits, pin multiplexing, decoupling requirements, clock configuration, and programming options. Because the supplied web data does not include a verified unit-price table or complete pin mapping, those details should be obtained from current manufacturer and distributor resources before purchasing or committing the PCB. This page combines verified distributor availability information, manufacturer-family positioning, package and memory details, interface capabilities, application guidance, and engineering-oriented sourcing notes. It is intended to support component selection and design planning without replacing the manufacturer datasheet for final electrical validation.

詢價 聯絡我們
STM8L152C8T6 - 16MHz 64KB Ultra-Low-Power MCU | STMicroelectronics
STM8L152C8T6

STM8L152C8T6 - 16MHz 64KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L152C8T6 is an 8-bit ultra-low-power microcontroller with a 16 MHz enhanced STM8 CPU core, 64 KB Flash memory, 4 KB SRAM, and a 48-pin LQFP package measuring 7 mm by 7 mm. It operates from 1.8 V to 3.6 V and integrates an LCD controller, real-time clock, timers, USART, I2C, SPI, ADC, DAC, and comparators. An ultra-low-power microcontroller is an energy-efficient embedded processing device designed to conserve battery energy while still providing real-time control, communications, data acquisition, and user-interface functions. The STM8L152 family belongs to the STM8L low-power MCU hierarchy, combining an 8-bit CPU architecture with integrated analog and communication peripherals for compact, battery-operated equipment. Key features include 64 KB of Flash for firmware, 4 KB of data RAM, operation up to 16 MHz, and a 1.8 V to 3.6 V supply range. The integrated LCD controller supports compact segmented or matrix displays, while the RTC provides timekeeping for metering, logging, and scheduled control. The ADC, DAC, and comparators reduce the need for external discrete components in sensing and signal-generation systems. The STM8L152C8T6 combines several embedded peripherals on one device: USART for serial communication, I2C and SPI for bus-connected sensors and memory, timers for periodic and event-driven control, and analog converters for measurements and low-level output control. Its enhanced STM8 CPU core provides increased processing power relative to earlier STM8 devices while retaining an 8-bit architecture suited to control-oriented products. Typical applications include low-energy sensor nodes, compact industrial data loggers, battery-powered meters, LCD-equipped handheld instruments, smart building controls, and connected monitoring systems. Its 64 KB Flash capacity is useful for moderate protocol stacks, local configuration data, and application firmware, while the LCD and RTC simplify standalone instrument designs. Designers should preserve the required input-voltage range of 1.8 V to 3.6 V and account for the device's specified low-power operating modes. PCB layout should provide a stable decoupling network near the supply pins and adequate signal-integrity routing for external LCD, communication, and analog interfaces. Firmware selection must also verify that the selected clock and peripheral settings remain compatible with the intended energy budget. This product page combines verified manufacturer and distributor information with memory, interface, package, application, and replacement guidance. It also distinguishes confirmed drop-in candidates from options that require firmware, package, or feature verification before they can be used as true replacements.

USD $1.56 有庫存
STM8L152C8U6 - 16MHz 64KB Ultra-Low-Power MCU | STMicroelectronics
STM8L152C8U6

STM8L152C8U6 - 16MHz 64KB Ultra-Low-Power MCU | STMicroelectronics

STMicroelectronics STM8L152C8U6 is an 8-bit ultra-low-power microcontroller with an enhanced STM8 CPU core, a 16 MHz operating frequency, 64 KB of Flash memory, and a 48-pin UFQFPN package measuring 7 x 7 mm. The device is designed for compact embedded systems that require low-power operation, a broad set of communication interfaces, and dedicated LCD-compatible resources. An ultra-low-power microcontroller is an integrated circuit optimized to minimize energy consumption during active operation, standby, and low-power modes. This makes it suitable for battery-operated equipment, portable measurement devices, industrial sensors, and consumer products whose duty cycle alternates between brief processing periods and extended idle periods. Within the embedded-control hierarchy, the STM8L152C8U6 combines CPU, memory, timers, analog conversion, and communications functions on one package. The principal device characteristics include 64 KB of Flash program memory, 16 MHz maximum operating frequency, and operation across a 1.8 V to 3.6 V supply range. Integrated resources include an RTC, LCD interface, timers, USART, I2C, SPI, a 10-bit ADC, a DAC, comparators, and 1 KB of data EEPROM. These functions allow one controller to manage local sensing, display updates, communications, and timekeeping without requiring several discrete components. The enhanced STM8 CPU core provides an 8-bit CISC architecture with dedicated peripherals for low-power and real-time control. Its combination of Flash memory, EEPROM, RTC, ADC, DAC, and communication interfaces is especially useful for compact control platforms in which board area and energy use are important. The UFQFPN package supports compact PCB layouts, although its exposed-pad thermal and assembly requirements must be considered carefully. Typical applications include low-power sensor nodes, battery-powered instrumentation, compact industrial controllers, LCD-based user interfaces, meter-reading equipment, portable health devices, and connected sensing products. The 16 MHz processing rate and 64 KB memory capacity are suitable for moderate control workloads, protocol handling, data acquisition, and local configuration storage. Designers should follow the manufacturer datasheet for the exact pin assignments, alternate-function selection, clock configuration, startup sequence, and decoupling requirements. The low-power operating modes should be validated with the intended system load and wake-up sources. PCB design must account for the exposed thermal pad, adequate copper area, controlled layout of analog and communication signals, and the manufacturer's recommended capacitor arrangement. This product overview connects package, memory, interface, lifecycle, and application details with practical design guidance. It also distinguishes documented configuration differences among closely related STM8L152 variants, helping engineers determine whether a different ordering code or package can be used without assuming automatic drop-in compatibility.

詢價 聯絡我們
STM8L152K4T6 - 16MHz 16KB Flash Ultra-Low-Power MCU | STMicroelectronics
STM8L152K4T6

STM8L152K4T6 - 16MHz 16KB Flash Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L152K4T6 is an 8-bit ultra-low-power microcontroller operating up to 16 MHz with 16 KB of Flash memory in a 32-pin LQFP 7 x 7 mm package. The device supports 2.5 V and 3.3 V operation and integrates 1 KB of data EEPROM, an LCD interface, real-time clock, timers, USART, I2C, SPI, ADC, DAC, and comparators. An ultra-low-power microcontroller is a compact embedded controller designed to maintain accurate digital control while minimizing energy use. The STM8L family belongs to the 8-bit microcontroller hierarchy and is intended for battery-powered, portable, industrial, sensing, and control products where low active and standby power can extend operating time between maintenance events. The STM8L152K4T6 combines that low-power positioning with a broad collection of mixed-signal and communications peripherals. Key features include 16 KB of Flash for firmware, 16 MHz maximum operating frequency, 1 KB of data EEPROM, and dedicated 2.5 V or 3.3 V supply operation. Integrated LCD support is useful in meter, keypad, and panel designs, while the RTC and low-power modes suit timekeeping applications. USART, I2C, and SPI interfaces provide practical options for sensors, transceivers, memory, and external controllers. The STM8L152K4T6 also integrates a 12-bit-class ADC, DAC, and comparators according to the family-level device description, allowing compact designs to perform analog measurement and control without requiring every conversion function in a separate IC. Its 32-pin LQFP package exposes the mixed-signal and digital resources required for medium-density embedded designs while remaining compatible with conventional leaded PCB assembly methods. Typical uses include low-energy sensor nodes, LCD utility meters, industrial condition-monitoring terminals, small appliance controllers, battery-powered instruments, and compact data-acquisition systems. The LCD interface, RTC, EEPROM, serial ports, ADC, DAC, and comparators make it especially useful when a single controller must combine display, measurement, timekeeping, and external communication. Designers should verify the exact pin configuration, operating limits, memory map, and peripheral electrical characteristics in the manufacturer datasheet before layout or production release. Production quantities also require board-level checks for decoupling, analog reference stability, LCD drive requirements, clock configuration, and low-power mode transitions. The verified distributor data supports availability and pricing references, but the available excerpts do not provide a complete timing, power-consumption, or absolute-maximum-rating table. This product page combines verified manufacturer and distributor information with practical purchasing, comparison, and design guidance. It distinguishes true same-package alternatives from broader functional alternatives and identifies unavailable technical details explicitly instead of estimating them.

詢價 聯絡我們
STM8L152K4U6 - 16MHz 8-Bit Ultra-Low-Power MCU | STMicroelectronics
STM8L152K4U6

STM8L152K4U6 - 16MHz 8-Bit Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L152K4U6 is an 8-bit ultra-low-power microcontroller with a 16 MHz maximum clock, 16 KB of Flash memory, and a 32-pin UFQFPN package with an exposed pad, supplied in a tray. It belongs to the STM8L ultra-low-power family and integrates an RTC, LCD controller, timers, USART, I2C, SPI, ADC, DAC, and comparators. The device is designed for compact, low-energy embedded systems where a modest processing rate and broad peripheral integration are more important than high-bandwidth processing. An ultra-low-power microcontroller is a type of embedded controller optimized to minimize energy consumption during active operation, idle periods, and shutdown states. The STM8L family belongs to the broader hierarchy of 8-bit MCU, embedded controller, and semiconductor categories. STM8L152K4U6 devices combine an energy-conscious architecture with analog and digital peripherals, allowing a design to avoid adding separate interface, conversion, or timing components. Key features include a 16 MHz maximum operating frequency, 16 KB Flash, 1 KB data EEPROM, and 2.5 V or 3.3 V supply operation as identified by the verified distributor data. Integrated communication resources include USART, I2C, and SPI, while the analog subsystem includes an ADC, DAC, and comparators. The RTC and LCD controller support designs that must retain timekeeping or directly drive a low-power display without relying on a separate host processor. The STM8L architecture uses an 8-bit CISC-style microcontroller core and a modular peripheral arrangement. The verified source describes the STM8L152x4/6 family as part of the STM8L ultra-low-power 8-bit family. Because this product is specified as a 16 KB Flash device, firmware planning must be based on 16 KB rather than the larger memory capacity available to some family members. Exact RAM, current-consumption, accuracy, and absolute maximum ratings require confirmation in the manufacturer datasheet. Typical uses include battery-powered environmental sensors, compact industrial monitoring nodes, low-power instrument interfaces, LCD-based control panels, and portable measurement products. In these systems, the integrated ADC and comparators support local sensing, the serial interfaces support external sensors or data acquisition modules, and the RTC can provide time stamping or scheduled control functions without continuous external supervision. Design consideration: select decoupling and power-distribution components according to the manufacturer reference circuit, and verify the device's exact pin assignments before PCB layout because the verified excerpts do not provide a complete pin table. Do not infer that family members with different flash sizes, temperature grades, or package suffixes are interchangeable without checking their ordering information. The STM8L152K4U6 uses a 32-pin UFQFPN with an exposed pad, so land-pattern and thermal-via design must follow the official package drawing. This page consolidates the verified manufacturer and distributor excerpts, separates exact published facts from unresolved datasheet parameters, and identifies same-family alternatives with explicit engineering differences. It also provides comparison, sourcing, design, and selection guidance to reduce the risk of choosing an MCU based only on its displayed part number.

詢價 聯絡我們
STM8L152K6T3 - 16MHz 32KB Low-Power MCU | STMicroelectronics
STM8L152K6T3

STM8L152K6T3 - 16MHz 32KB Low-Power MCU | STMicroelectronics

STMicroelectronics STM8L152K6T3 is an 8-bit ultra-low-power STM8L EnergyLite microcontroller with a 16 MHz clock, 32 KB Flash memory, and a 32-LQFP 7 x 7 mm package. It combines 1 KB of data EEPROM with an RTC, LCD interface, timers, USART, I2C, SPI, ADC, DAC, and comparators in an energy-conscious 8-bit platform. An ultra-low-power microcontroller is designed to maintain accurate measurement, communication, and control functions while minimizing energy use during active operation and standby. The STM8L family belongs to the broader hierarchy of embedded MCU, microcontroller, and semiconductor devices. Low-power architecture is especially useful in battery-operated equipment where the time spent waiting for an event can dominate overall energy consumption. The STM8L152K6T3 provides 32 KB of Flash for program storage, 1 KB of EEPROM for nonvolatile data, and operation from 1.8 V to 3.6 V. Its peripheral set includes an RTC for timekeeping, an ADC and comparators for analog measurements, a DAC for analog output, and USART, I2C, and SPI interfaces for external sensors, memory, and host connectivity. The LCD interface supports compact user-interface designs. This is a CISC-based 8-bit MCU built for compact embedded systems rather than high-throughput applications. Its 16 MHz operating frequency supports control-loop and communications tasks while its low-power operating modes help reduce average consumption. The medium-density STM8L15x family is specified over 1.8 V to 3.6 V and includes temperature grades from -40 °C to +85 °C and -40 °C to +125 °C depending on the exact ordering code. Typical applications include low-power sensor nodes, compact industrial monitoring equipment, battery-powered instruments, LCD-driven user interfaces, data loggers, and connected control modules. The ADC and comparators suit threshold detection, while the RTC and EEPROM can retain timestamps and calibration data between power cycles. Serial interfaces allow the MCU to connect measurement hardware to a host or external memory. Design around the MCU's low-power modes by defining which peripherals can remain active in each operating mode. Keep analog and communication traces short, provide the decoupling required by the manufacturer datasheet, and confirm pin multiplexing before assigning LCD, ADC, DAC, or serial functions. Verify the selected ordering code against the required temperature grade and production design. This product page combines the principal device specifications with package guidance, pinout-status documentation, selection trade-offs, and a focused comparison with same-family drop-in options. It is intended to help engineers evaluate memory, voltage, interface, and temperature requirements before committing the STM8L152K6T3 to a PCB design.

詢價 聯絡我們
STM8L152K6U6 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics
STM8L152K6U6

STM8L152K6U6 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L152K6U6 is an ultra-low-power 8-bit microcontroller with a 16 MHz maximum clock, 32 KB of Flash memory, and a 32-pin UFQFPN package measuring 5 mm by 5 mm. It belongs to the STM8L ultra-low-power family and is designed for energy-sensitive embedded control applications that require a compact microcontroller and a broad peripheral set. An ultra-low-power 8-bit microcontroller is a compact embedded-control platform designed to consume little energy while performing sensor reading, timing, communications, data acquisition, and local control functions. The STM8L family hierarchy connects this device to 8-bit microcontrollers, embedded controllers, and semiconductor components suited to battery-operated, industrial, and always-on equipment. Its small package also supports space-constrained designs. The verified product information identifies 32 KB of Flash, operation up to 16 MHz, and an STM8L152K6-class configuration in a 32-pin UFQFPN package. The product family also provides LCD support, timers, USART, I2C, SPI, ADC, DAC, and comparators according to the supplied datasheet search result. These interfaces make the device suitable for connected sensing, low-power instrumentation, and compact control panels. The STM8L152K6U6 combines an 8-bit CPU architecture with a broad set of embedded peripherals rather than relying on external interface devices. Timer resources can support periodic measurement and PWM generation, while the ADC and comparators can monitor analog inputs. USART, I2C, and SPI options permit integration with sensors, transceivers, memory, and human-interface modules. The 32 KB Flash capacity provides room for application firmware and configuration data. Typical uses include low-energy sensor nodes, compact environmental monitors, LCD-driven utility meters, industrial condition-monitoring equipment, and battery-powered accessories. In each case, the device can consolidate several small functions into one controller while keeping the board area limited by the 5 mm by 5 mm package. Designers must still verify operating limits, peripheral availability, and pin multiplexing against the complete manufacturer documentation. The principal design consideration is package and pin planning. A 32-pin UFQFPN footprint requires careful escape routing, exposed-pad thermal management where applicable, and reflow-profile control. Exact pin names, alternate functions, and electrical limits are not included in the supplied verified excerpts, so they should not be inferred from generic STM8 family diagrams before the complete manufacturer datasheet and package drawing are reviewed. This page consolidates the verified distributor and manufacturer information, package details, interface capabilities, pricing references, and constrained drop-in alternatives. It also identifies where complete electrical, pinout, lifecycle, and compliance data remain necessary for production qualification rather than presenting unverified values as specifications.

詢價 聯絡我們
STM8L152M8T6 - 16MHz 64KB Low-Power MCU | ST
STM8L152M8T6

STM8L152M8T6 - 16MHz 64KB Low-Power MCU | ST

The STMicroelectronics STM8L152M8T6 is an 8-bit STM8L EnergyLite ultra-low-power microcontroller with a 16 MHz maximum CPU frequency, 64 KB of embedded Flash memory, 2 KB of data EEPROM, and an 80-pin LQFP package measuring 14 x 14 mm. It integrates an RTC, LCD support, timers, and an enhanced STM8 CPU core, making it suitable for compact control systems where energy efficiency and peripheral integration are important. An ultra-low-power microcontroller is a semiconductor designed to complete control, measurement, and communication tasks while minimizing energy consumption during active operation, standby, and low-power states. The STM8L152M8T6 belongs to the STM8L family, combining a CISC-based STM8 core with embedded Flash and EEPROM in a surface-mount package. This hierarchy places it between general-purpose 8-bit microcontrollers and highly integrated embedded control devices. Key features include a maximum CPU frequency of 16 MHz, an 8-bit data bus, 64 KB of programmable Flash, and 2 KB of data EEPROM. The integrated RTC supports timekeeping-oriented designs, while LCD support reduces the component count of segmented human-interface panels. The STM8L152M8 series also provides dedicated timer resources, allowing the MCU to measure intervals, generate timing signals, and coordinate periodic system functions without an external timing IC. The enhanced STM8 CPU core provides increased processing power compared with earlier low-power members of the STM8 family, with operation up to 16 MHz. The device combines 64 KB Flash with a separate 2 KB EEPROM area for persistent data. Its 80-LQFP package provides a large pin count relative to the device footprint, supporting extensive peripheral routing while remaining compatible with standard surface-mount assembly. Operating voltage, RAM capacity, and detailed temperature limits are not stated in the supplied source data and should be confirmed in the manufacturer documentation before design release. Typical applications include low-power sensor-hub controllers, battery-operated instruments, industrial monitoring nodes, LCD-based user interfaces, real-time-clock systems, and compact embedded products that require more I/O than a small-package MCU can offer. The combination of 64 KB Flash, 16 MHz processing speed, EEPROM, RTC, LCD support, and timers allows a single device to consolidate several peripheral functions. Designers should confirm the complete pin assignment, supply-voltage limits, decoupling requirements, and low-power configuration strategy against the manufacturer datasheet before PCB release. Because the LQFP footprint contains 80 fine-pitch leads, board assembly should provide suitable land patterns, thermal-via strategy, and soldering profiles. Firmware must also validate the active, standby, and wake-up behavior required by the final power budget. This page consolidates verified manufacturer and distributor information, source-linked pricing, same-package alternatives, comparison parameters, and practical selection guidance. It is intended to accelerate engineering review while clearly identifying parameter areas that still require datasheet confirmation.

詢價 聯絡我們
STM8L152R6T6 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics
STM8L152R6T6

STM8L152R6T6 - 16MHz 32KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L152R6T6 is an 8-bit ultra-low-power microcontroller with a 16 MHz enhanced STM8 CPU core, 32 KB of Flash memory, and a 64-LQFP 10 x 10 mm package. It combines low-power operation with integrated RTC, LCD, timers, USART, I2C, SPI, ADC, DAC, and comparator resources for energy-conscious embedded designs. An ultra-low-power microcontroller, or ULP MCU, is a semiconductor that prioritizes low current consumption while retaining the peripherals and processing capability needed for compact embedded products. The STM8L152 family belongs to the STM8L EnergyLite product line and can sit within an embedded control system that measures, controls, communicates, and manages power without requiring a high-performance processor. Key features include up to 16 MHz processing performance, 32 KB Flash organized as 32K x 8, and a 16 MHz operating specification reported by the product listing. The device also supports an operating power supply down to 3.6 V in power-down operation, operation up to 125°C according to the component specification listing, and multiple serial and analog peripherals for reducing external component count. The STM8L152R6T6 uses the enhanced STM8 8-bit architecture and is designed for applications where energy efficiency, fast wake-up, and integrated mixed-signal resources matter more than a large memory map. Its peripheral set includes an RTC for timekeeping, LCD support for human-machine interfaces, USART and I2C for serial communication, SPI for higher-speed peripheral links, and ADC, DAC, and comparator resources for sensor and control circuits. Typical applications include low-energy sensor nodes, compact industrial monitors, building and access controls, battery-operated instruments, LCD-based meters, smart home endpoints, and portable measurement equipment. The 64-LQFP package also provides enough pins for external memory, display connections, communications, and analog inputs when required by a compact industrial design. When laying out the circuit, follow the manufacturer pin-description and package-connection tables rather than inferring unused pins. Place decoupling capacitors close to the supply pins, keep sensitive analog and digital return paths controlled, and verify startup, reset, clock, and power-down behavior against the device's configuration. The mixed supply limits shown across operating modes should be checked for every rail in the final power tree. This product page consolidates the exact STM8L152R6T6 identity, package and memory details, drop-in candidates, comparison parameters, and practical design guidance. It supports faster engineering decisions by connecting the device's low-power architecture and peripheral inventory to concrete embedded applications while keeping unresolved electrical details explicit rather than inferred.

詢價 聯絡我們
STM8L152R8T6 - 8-Bit Ultra-Low-Power MCU, 64KB Flash | STMicroelectronics
STM8L152R8T6

STM8L152R8T6 - 8-Bit Ultra-Low-Power MCU, 64KB Flash | STMicroelectronics

The STM8L152R8T6 is an 8-bit ultra-low-power microcontroller from STMicroelectronics, part of the STM8L EnergyLite family. It features an enhanced STM8 CPU core running at up to 16 MHz, 64 KB of Flash memory, 4 KB of RAM, and 2 KB of data EEPROM. The device is housed in a 64-pin LQFP (10x10 mm) package and operates over a supply voltage range of 1.8V to 3.6V, with a temperature range of -40°C to 125°C. It integrates a rich set of peripherals including an LCD driver, real-time clock (RTC), timers, USART, I2C, SPI, ADC, DAC, and comparators, making it suitable for a wide range of low-power applications. An 8-bit microcontroller is a single-chip computer with an 8-bit data bus, typically used in embedded systems where cost, power efficiency, and simplicity are prioritized over raw processing power. The STM8L152R8T6 belongs to the STM8L series, which is specifically designed for ultra-low-power operation, featuring multiple low-power modes (Wait, Low-power Run, Low-power Wait, Active-halt, and Halt) to minimize energy consumption. In the broader hierarchy, it sits as a microcontroller -> 8-bit MCU -> ultra-low-power MCU -> STM8L EnergyLite family, and is a key component in battery-powered and energy-harvesting applications. Key features include an ultra-low-power STM8 core with up to 16 MHz operation, 64 KB Flash with read-while-write capability, 4 KB RAM, 2 KB true data EEPROM with error correction code (ECC), and a 12-bit ADC with up to 28 channels. The device also integrates a 12-bit DAC, two comparators, an LCD driver supporting up to 8x40 segments, and a real-time clock with calendar and alarm functions. Its low-power design achieves typical current consumption of 3.4 µA in Halt mode with RTC on, and 0.35 µA in Halt mode without RTC, making it ideal for battery-powered devices. From a technical depth perspective, the STM8L152R8T6 uses a Harvard architecture with a 3-stage pipeline, allowing most instructions to execute in a single clock cycle. The Flash memory supports read-while-write, enabling firmware updates without halting the CPU. The device includes a flexible clock system with internal and external oscillators, a phase-locked loop (PLL) for frequency multiplication, and a clock security system for fail-safe operation. The ultra-low-power design is achieved through advanced process technology and multiple power domains, allowing independent power management of the core, peripherals, and I/O. Typical applications include portable medical devices (e.g., glucose meters, pulse oximeters), smart meters, wireless sensor nodes, and industrial control systems. The STM8L152R8T6's low power consumption and rich analog peripherals make it particularly well-suited for battery-powered applications where long battery life is critical. Its LCD driver and RTC also make it ideal for consumer electronics like digital thermometers and smart watches. When designing with this device, pay careful attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 1 µF capacitor at the main power input. Additionally, configure the unused I/O pins to analog mode or low-power mode to minimize leakage current, and use the low-power modes effectively to extend battery life.

詢價 聯絡我們
STM8L162M8T6 - 8-Bit Ultra-Low-Power MCU, 64KB Flash | STMicroelectronics
STM8L162M8T6

STM8L162M8T6 - 8-Bit Ultra-Low-Power MCU, 64KB Flash | STMicroelectronics

The STM8L162M8T6 is an 8-bit ultra-low-power microcontroller from STMicroelectronics' STM8L EnergyLite family. It features a 16 MHz STM8 core, 64 KB of Flash memory, 4 KB of RAM, and 68 I/O pins in an 80-pin LQFP package (14x14 mm). Operating from 1.8V to 3.6V, it is designed for energy-efficient applications requiring long battery life. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, executing instructions sequentially. It integrates a processor core, memory (Flash, RAM), and peripherals (timers, UART, SPI, I2C, ADC) on one IC. In the hierarchy of embedded systems, an MCU is a type of integrated circuit, specifically a microcontroller, which falls under the broader category of semiconductors. The STM8L EnergyLite series is optimized for ultra-low-power operation, making it a key component in battery-powered and energy-harvesting designs. Key features include multiple low-power modes (Wait, Low-power Run, Low-power Wait, Active-halt, Halt) with current consumption as low as 0.3 µA in Halt mode, a 12-bit ADC, two comparators, a real-time clock (RTC), and a wide range of communication interfaces (USART, SPI, I2C). The device also includes an LCD driver (up to 8x40 segments), a 12-bit DAC, and a DMA controller, enhancing its versatility for sensor and display applications. The STM8L162M8T6 is built on a low-leakage CMOS process, achieving industry-leading energy efficiency. Its architecture supports fast wake-up times (as low as 4 µs) and dynamic voltage scaling, allowing designers to balance performance and power consumption. The integrated bootloader and in-application programming (IAP) capabilities simplify firmware updates in the field. Typical applications include portable medical devices (glucose meters, pulse oximeters), smart meters, wireless sensor nodes, and industrial process control. Its ultra-low-power modes and rich analog peripherals make it ideal for battery-powered systems where every microamp matters. When designing with this MCU, pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 1 µF capacitor at the main supply. Use the low-power modes strategically to extend battery life, and ensure the crystal oscillator layout is clean to maintain accurate timing.

詢價 聯絡我們
STM8L162R8T6 - 16MHz 64KB Ultra-Low-Power MCU | STMicroelectronics
STM8L162R8T6

STM8L162R8T6 - 16MHz 64KB Ultra-Low-Power MCU | STMicroelectronics

The STMicroelectronics STM8L162R8T6 is an ultra-low-power 8-bit microcontroller with a 16 MHz clock, 64 KB of Flash memory, and a 64-pin LQFP package. It belongs to the high-density STM8L162x8 family and is designed for embedded systems that require compact control, low power consumption, and extensive peripheral integration. The manufacturer describes the enhanced STM8 CPU core as delivering up to 16 MIPS at 16 MHz. An ultra-low-power microcontroller is a semiconductor controller designed to minimize energy consumption during active operation and standby periods. The STM8L162 family sits within the broader hierarchy of microcontrollers, embedded processors, and semiconductor control devices. Its 8-bit architecture is suited to compact control tasks that collect sensor information, operate human-interface elements, manage communications, and sequence external hardware without requiring a high-end application processor. The STM8L162R8T6 combines a 16 MHz maximum clock with 64 KB of program Flash in an LQFP-64 package. The STM8L family designation identifies the device as an EnergyLite low-power MCU family, while the L162x8 group provides a larger pin count and greater peripheral integration than lower-density members. This combination is useful when a design needs more I/O than a small package can provide but does not require a 32-bit processor. Its 8-bit STM8 CPU core offers up to 16 MIPS at 16 MHz, giving designers deterministic performance for control-loop and firmware workloads. The 64 KB Flash capacity provides room for application code, boot logic, configuration data, and communication routines. Its 64-LQFP package also provides a generous pin count for external sensing, actuators, serial links, and discrete power-control functions, although the exact peripheral assignment must be confirmed against the pin-description table in the manufacturer documentation. Typical applications include low-power sensor nodes, industrial monitoring equipment, compact control panels, connected accessories, building and automation controllers, and battery-operated embedded products. In these systems, the MCU can manage local inputs, coordinate peripheral functions, and support serial data exchange while conserving energy during inactive intervals. The larger package is particularly useful where field wiring, status indicators, analog channels, or multiple communication interfaces are required. When designing around the STM8L162R8T6, begin with the manufacturer pin-description table and reference manual because no complete public pin assignment is reproduced on this page. Preserve the supply, ground, reset, and debug connections required by the device, and account for the thermal and electrical requirements of every connected peripheral. Firmware should also be tested across the intended voltage and temperature conditions before deployment. This product page combines the manufacturer's core device information, package and memory details, sourcing structure, drop-in alternatives, and practical engineering guidance. It is designed to help engineers identify the correct MCU, verify PCB compatibility, compare family alternatives, and plan power-aware embedded designs without requiring repetitive searches across technical documents.

詢價 聯絡我們
STM8S001J3M3 - 16MHz 8-bit MCU, 8KB Flash, SOIC-8 | STMicroelectronics
STM8S001J3M3

STM8S001J3M3 - 16MHz 8-bit MCU, 8KB Flash, SOIC-8 | STMicroelectronics

The STMicroelectronics STM8S001J3M3 is a 16 MHz 8-bit STM8S microcontroller with 8 KB of Flash program memory, 128 bytes of true data EEPROM, and a 10-bit ADC, packaged in an 8-pin SOIC (SO-8/SO8N) outline. It is the lowest-pin-count member of the mainstream STM8S value line, offering the full STM8S peripheral set in a footprint as small as the ATtiny13/ATtiny85. According to the ST datasheet (DocID026881), the device integrates a Harvard-architecture 3-stage pipeline core, three timers, plus UART, SPI, and I2C communication interfaces, all in a tiny 8-pin package. A microcontroller (MCU) is an integrated circuit that combines a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), small non-volatile data storage (EEPROM), and a configurable set of digital and analog peripherals on a single silicon die. The STM8S family sits in the 8-bit MCU category, which traces up the hierarchy to microcontroller -> embedded processor -> semiconductor IC. The STM8S core uses an extended instruction set that is binary-compatible across the STM8S/STM8L families, making code portable to higher-pin-count siblings when the design grows. Key features include 8 KB Flash with in-application/in-circuit programming, 128 bytes of true byte-erasable EEPROM rated for 100 k cycles, 1 KB SRAM, 5 ADC channels with 10-bit resolution and up to 12-bit oversampling, a 16 MHz internal RC oscillator calibrated to ±1%, and a 1.8 V to 5.5 V supply range. The 8-pin SOIC exposes just enough I/O to drive a handful of switches, LEDs, sensors, or a serial link, and the integrated brown-out reset and watchdog timer simplify safety-critical designs. Two 16-bit timers and one 8-bit timer provide PWM, input capture, and output compare functions for motor, LED, and timing control. Architecturally, the STM8S001J3 is a derivative of the STM8S003F3 with the same silicon die repackaged into an 8-pin SOIC, dropping most GPIOs in favor of a tiny PCB footprint. The integrated voltage regulator lets the chip run from a single 1.8-5.5 V rail without external components. With an active-mode current in the single-digit mA range and multiple low-power modes down to a few microamps, it is well suited to battery-powered gadgets and always-on sensor nodes. Typical applications include low-cost sensor interface boards, replacement of ATtiny13/ATtiny85 designs, smart LED controllers, IR remote transmitters/receivers, simple motor and fan controllers, battery chargers, and hobby/educational platforms such as the STM8 eForth project. The wide operating temperature range (-40C to +125C) and 5 V tolerance on most pins also make it viable for industrial control front-ends. When designing with this device, note that only 6 of the 8 pins are usable as GPIO because NRST and power pins are mandatory. Use the SWIM debug interface for in-circuit programming and debugging, and place a 100 nF decoupling capacitor as close as possible to the VDD pin. Compare pinout carefully against ATtiny85 migration paths before re-using existing PCB layouts. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the ST datasheet, helping engineers quickly evaluate the STM8S001J3M3 for low-pin-count 8-bit designs.

詢價 聯絡我們
STM8S003F3P6 - 8-bit MCU 8KB Flash 16MHz TSSOP-20 | STMicroelectronics
STM8S003F3P6

STM8S003F3P6 - 8-bit MCU 8KB Flash 16MHz TSSOP-20 | STMicroelectronics

The STMicroelectronics STM8S003F3P6 is a value line 8-bit microcontroller based on the STM8 core, running at up to 16 MHz with 8 KB of Flash memory, 1 KB of RAM, and 128 bytes of true data EEPROM in a 20-pin TSSOP package. An 8-bit microcontroller (MCU) is a single-chip computer integrating an 8-bit CPU, program memory, data memory, and programmable peripherals. The STM8S003F3P6 belongs to the STM8S series within the STM8 family, positioned below the 32-bit STM32 series in STMicroelectronics' product hierarchy and targeting cost-sensitive embedded control. Key features include 8 KB Flash with integrated true EEPROM (up to 100,000 write/erase cycles), a 10-bit ADC with 5 channels, and UART, SPI, and I2C interfaces. The device operates from 2.95V to 5.5V, supporting both 3.3V and 5V systems, with 16 programmable I/Os and 7 timers/counters including a 16-bit timer, an 8-bit timer, and watchdog timers. The STM8 core uses a Harvard-architecture 3-stage pipeline delivering 16 MIPS at 16 MHz. An internal 16 MHz RC oscillator eliminates the need for an external crystal in many designs. Low-power modes include Halt, Active-Halt, and Wait, with 3.6 mA typical in Run mode at 16 MHz and about 1 uA in Halt mode. Typical applications include home appliances, industrial control, consumer electronics, motor control helpers, and sensor interfaces. Its wide voltage range and robust I/O make it popular in white goods, power tools, and battery-powered devices, while the integrated EEPROM removes external non-volatile memory from the BOM. Design tip: decouple VDD with a 100 nF capacitor placed close to the pin. The internal RC is accurate to approximately 2%, so use an external crystal when precise timing is required. SWIM single-wire in-circuit programming simplifies firmware updates. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes beyond the ST datasheet, as of 2026-08-29.

USD $0.36 聯絡我們
STM8S003F3P6TR - 8-bit MCU, 8KB Flash, 16MHz | STMicroelectronics
STM8S003F3P6TR

STM8S003F3P6TR - 8-bit MCU, 8KB Flash, 16MHz | STMicroelectronics

The STMicroelectronics STM8S003F3P6TR is an 8-bit microcontroller based on the STM8 core, offering 8KB of Flash memory, 1KB of RAM, and 640 bytes of EEPROM in a 20-pin TSSOP package. It operates at a maximum frequency of 16 MHz and supports a supply voltage range of 2.95V to 5.5V, making it suitable for a wide range of cost-sensitive embedded applications. Data verified as of 2026-08-05. An 8-bit microcontroller (MCU) is a compact integrated circuit that contains a processor core, memory, and programmable input/output peripherals on a single chip. The STM8 core is an 8-bit CISC architecture designed for high code density and efficient performance in low-cost applications. As a member of the STM8S series, this MCU sits within the broader hierarchy of microcontrollers, which are themselves a subset of embedded processors used in everything from consumer electronics to industrial control systems. Key features include 8KB of Flash program memory, 1KB of SRAM, and 640 bytes of true data EEPROM with write protection. The device integrates a 10-bit analog-to-digital converter (ADC) with up to 5 channels, a UART, SPI, and I2C interface, and a 16-bit timer with PWM capability. It also includes a watchdog timer, a clock security system, and a low-power mode to minimize energy consumption. The STM8S003F3P6TR is built on a robust 8-bit architecture with a 3-stage pipeline, enabling most instructions to execute in a single clock cycle. The device supports a wide operating temperature range from -40°C to +85°C, making it reliable for industrial environments. The TSSOP-20 package offers a compact footprint of 6.4mm x 4.4mm, ideal for space-constrained PCB designs. Typical applications include home appliances, small appliances, lighting control, power tools, and sensor interfaces. Its rich peripheral set and low cost make it a popular choice for high-volume consumer products where cost efficiency is paramount. When designing with this MCU, ensure proper decoupling of the VDD pin with a 100nF capacitor placed close to the device. The NRST pin should be connected to VDD through a 100nF capacitor and a pull-up resistor to prevent spurious resets. For programming, the SWIM interface requires a single-wire connection, simplifying in-circuit programming. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the ST datasheet, providing engineers with a comprehensive resource for evaluating the STM8S003F3P6TR.

詢價 聯絡我們
STM8S003K3T6 - 8-bit 16MHz MCU, 8KB Flash | STMicroelectronics
STM8S003K3T6

STM8S003K3T6 - 8-bit 16MHz MCU, 8KB Flash | STMicroelectronics

The STMicroelectronics STM8S003K3T6 is an 8-bit value-line STM8S microcontroller featuring a 16 MHz advanced STM8 core, 8 KB of Flash program memory and 128 bytes of true data EEPROM, housed in a 32-pin LQFP (7x7 mm) package. According to the manufacturer datasheet, the device integrates a 10-bit ADC, three general-purpose 16-bit timers, a UART, SPI and I2C communication interfaces, plus independent watchdog timers with separate clock source for safety-critical applications. The chip operates from 2.95 V to 5.5 V supply and is built on ST's state-of-the-art 130 nm embedded Flash process. A value-line microcontroller (often called an 8-bit MCU) is a small, low-cost processor optimised for embedded control tasks such as sensor reading, motor actuation, indicator driving, and user-interface handling. Within the broader semiconductor hierarchy, an MCU is a subset of microprocessors (MPU) and is differentiated by integrated Flash, RAM and peripherals on a single die. The STM8S003K3T6 occupies the entry-level value-line of the STM8S family, balancing die size, peripheral set and price for cost-sensitive designs where a 32-bit MCU is unnecessary. Key features that differentiate the STM8S003K3T6 in its class include 1 KB of RAM, the integrated 10-bit SAR ADC with up to 5 multiplexed channels, the clock security system (CSS) that detects external clock failure and switches to the internal RC oscillator, plus 100 k write/erase cycle endurance on the data EEPROM. Robust I/O design tolerates 5 V injection on adjacent pins, simplifying mixed-voltage interface to legacy 5 V peripherals. The 32-pin LQFP-32 (7x7) footprint provides easy hand-soldering and breadboard prototyping versus fine-pitch QFN options. Technically, the STM8S003K3T6 is engineered around the proprietary STM8 core with 16-bit index registers and a 20-bit program counter, executing most instructions in 1-2 clock cycles. The integrated voltage regulator and brown-out reset (BOR) circuitry protect the Flash against low-voltage write corruption. The 16 MHz system clock can be sourced from an external crystal, resonator, or the factory-trimmed internal 16 MHz RC oscillator with ±1 % accuracy across the full operating temperature range. Typical applications include low-cost consumer appliances (rice cookers, washing-machine user interfaces, induction cooktops), battery-powered sensor nodes, LED lighting controllers, simple BLDC/PMSM auxiliary motor drivers (fans, pumps), 5 V industrial control buttons, and Arduino-Nano-compatible hobbyist boards. The wide 2.95-5.5 V supply range and proven STM8 toolchain (STVD, IAR, Cosmic, SDCC) make it a frequent second source for legacy 8051 designs requiring a software refresh. When designing with the STM8S003K3T6, choose between the internal 16 MHz RC oscillator (saves BOM cost) and an external crystal (better UART baud-rate accuracy). Decouple VDD/VSS with 100 nF ceramic capacitors placed within 3 mm of each supply pin, and reserve the SWIM pin (single-wire debug) for in-circuit programming. For noisy environments, enable the CSS and the window watchdog for IEC 60730 class B compliance. This page synthesizes distributor pricing, drop-in alternatives and practical design notes not found in the manufacturer datasheet, and is intended as a faster reference than the 31-page ST datasheet for engineers evaluating the part for production.

詢價 聯絡我們
STM8S005C6T6 - 8-bit MCU, 32KB Flash, 16MHz | STMicroelectronics
STM8S005C6T6

STM8S005C6T6 - 8-bit MCU, 32KB Flash, 16MHz | STMicroelectronics

The STM8S005C6T6 is an 8-bit microcontroller from STMicroelectronics' STM8S value line, featuring a 16 MHz STM8 core, 32 Kbytes of Flash program memory, and 128 bytes of data EEPROM. It is housed in a 48-pin LQFP (7x7 mm) package, offering a compact footprint for space-constrained embedded applications. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, integrating a processor core, memory, and programmable peripherals. The STM8S005C6T6 belongs to the STM8S family, which is part of the broader STM8 8-bit MCU category, positioned below 32-bit ARM Cortex-M devices in the microcontroller hierarchy. It provides a cost-effective solution for applications requiring moderate processing power and rich peripheral integration without the complexity of 32-bit architectures. Key features include a 16 MHz CPU clock, 32 KB Flash, 2 KB RAM, 128 bytes EEPROM, and a comprehensive set of peripherals: 10-bit ADC, UART, SPI, I2C, timers, and up to 38 I/O pins. The device operates from a 2.95V to 5.5V supply, making it suitable for both 3.3V and 5V systems. Its robust ESD protection and wide operating temperature range (-40°C to +85°C) enhance reliability in industrial environments. The STM8S005C6T6 is built on ST's proprietary STM8 core, which delivers up to 20 MIPS at 16 MHz, providing efficient code execution for control-oriented tasks. The integrated EEPROM allows data storage without external components, simplifying BOM and reducing system cost. The device supports in-circuit programming and debugging via SWIM interface, enabling rapid firmware development. Typical applications include home appliances, industrial control, sensor interfaces, and consumer electronics. Its 5V-tolerant I/Os and rich peripheral set make it ideal for motor control, lighting, and power management systems. The wide voltage range and low power consumption support battery-powered devices. When designing with this MCU, ensure proper decoupling of the VDD pins with 100nF capacitors and a bulk capacitor. The SWIM pin should be pulled high for programming. For EMC-sensitive designs, follow ST's layout guidelines for the LQFP package to minimize noise coupling.

詢價 聯絡我們