積體電路

子分類

📁 ADC/DAC 3,100+ 產品 📁 放大器 IC 1,700+ 產品 📁 音訊編解碼器 18 產品 📁 音訊 IC 2 產品 📁 時脈與計時 640+ 產品 📁 Comparator ICs 1 產品 📁 DSP 1,100+ 產品 📁 資料擷取 IC 2 產品 📁 數位電位器 4 產品 📁 顯示驅動器與控制器 1 產品 📁 FPGA 與 CPLD 7,100+ 產品 📁 介面 IC 3,100+ 產品 📁 LED 驅動器 1 產品 📁 邏輯 IC 450+ 產品 📁 記憶體 IC 870+ 產品 📁 微控制器 20,000+ 產品 📁 微處理器 4 產品 📁 馬達驅動器 1 產品 📁 其他 1 產品 📁 感測器與偵測器介面 1 產品 📁 特殊用途 IC 15 產品 📁 視訊 IC 13 產品

產品（38,000+)

T4240NSN7TTB - QorIQ T4 24x 1.8GHz Power Arch MPU | NXP
T4240NSN7TTB

T4240NSN7TTB - QorIQ T4 24x 1.8GHz Power Arch MPU | NXP

The NXP T4240NSN7TTB is the flagship QorIQ T4 communications processor, integrating 12 PowerPC e6500 cores running up to 1.8 GHz (24 threads with hardware multithreading), a 1.8 GT/s DDR3L memory controller, and 4x 10 Gigabit Ethernet ports in a 1932-ball FCBGA (45x45 mm) package. Crypto acceleration is disabled in this -N suffix variant, and the device is qualified for 0 to 105 degrees C operation on silicon revision 2.0. A QorIQ communications processor is a member of the multicore Power Architecture microprocessor family specifically engineered for networking and embedded infrastructure workloads. Within the broader system hierarchy, QorIQ T series sits below: QorIQ T family -> QorIQ communications processor -> Power Architecture microprocessor -> embedded MPU -> integrated circuit. These parts are positioned for routers, switches, base stations, and other data-plane equipment where deterministic throughput and high SerDes lane counts are critical. Key features include 12 dual-threaded e6500 cores providing 24 threads, 64 KB I-cache and 32 KB D-cache per core plus a shared 2 MB L2 per cluster, a 64-bit DDR3L interface supporting 1.8 GT/s with ECC, integrated 10 Gbps SerDes, multiple PCI Express Gen 2 controllers, and the Data Path Acceleration Architecture (DPAA) for hardware offload of classification, queueing, and crypto. The 45x45 mm FCBGA package exposes 1932 balls and supports high-speed signal escape required for the multi-lane SerDes. The T4240 is fabricated in 28 nm CMOS process technology and pairs the e6500 cores with NXP's CoreNet coherency fabric. The four 10 Gbps ports can also be configured as multiple 1 GbE lanes, giving designers flexibility to scale from 1G to 40G aggregate Ethernet. The architecture enables line-rate processing for routing, deep-packet inspection, and traffic management without external lookup engines. Typical applications include enterprise routers, edge gateways, network attached storage controllers, LTE and 5G base station baseband, industrial control planes, and military secure communications platforms. The wide SerDes integration makes the T4240 particularly attractive where PCB real estate and power efficiency both matter. When designing with the T4240, allocate a minimum of a 12-layer PCB stack-up to route the DDR3L byte lanes and 10G SerDes with controlled impedance. Decoupling requires roughly 50 low-ESR ceramic capacitors distributed near the core and SerDes rails, and thermal design must assume up to 35 W TDP under full thread load. This page synthesizes distributor pricing, drop-in alternatives within the T4 family, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
TAS2555YZR - 5.7W Class-H Smart Amp | Texas Instruments
TAS2555YZR

TAS2555YZR - 5.7W Class-H Smart Amp | Texas Instruments

The Texas Instruments TAS2555YZR is a 5.7 W digital-input, mono Class-D smart audio amplifier with an 8.5 V Class-H boost, integrated speaker protection, and advanced equalization in a 42-pin DSBGA (YZ) package. According to the verified Texas Instruments product information, it operates from -40 °C to +85 °C and supports digital audio input while combining amplification, boost, protection, and system-level speaker control in one device. A Class-D smart amplifier is an audio power amplifier that converts digital or analog audio signals into a high-efficiency switching output suitable for driving a speaker. It belongs to the broader hierarchy of audio amplifier IC, amplifier IC, signal-processing semiconductor, and power-management electronics. Unlike a simple analog power stage, the TAS2555 integrates digital control, programmable audio functions, speaker sensing, and protection into a system-on-chip-style audio solution. The TAS2555YZR’s headline features include 5.7 W output power, digital input, integrated speaker protection, advanced equalization, and an 8.5 V Class-H boost. The boost function supports higher speaker voltage than the basic Class-D output stage, while integrated protection is intended to improve reliability in connected speaker systems. These functions target compact consumer and connected-audio equipment where board area, thermal performance, and speaker fault handling are important design constraints. Technically, the device combines a digital audio interface with a mono Class-D output stage and Class-H boost capability. Its architecture allows audio processing and speaker management to be integrated around the amplifier rather than implemented entirely as separate discrete functions. The verified manufacturer material describes the TAS2555 as a state-of-the-art Class-D audio amplifier and full system-on-chip solution, although detailed interface rates, distortion limits, thermal resistance, and detailed electrical limits require the manufacturer datasheet. Typical applications include Bluetooth and wireless speakers, smart speakers, portable audio products, sound bars, compact consumer-audio systems, and other embedded mono-speaker platforms. A designer can use the digital input to reduce analog signal-path noise, enable programmable equalization, and centralize speaker protection. The package’s 42-ball BGA construction supports compact layouts but requires careful PCB escape routing and assembly-process planning. When designing around the TAS2555YZR, verify the complete 42-pin YZ ball map, exposed-pad requirements, boost inductor requirements, speaker configuration, and recommended decoupling in the Texas Instruments datasheet. PCB layout should prioritize clean power and ground distribution, short switching-current loops, controlled high-current boost routing, and uninterrupted digital and speaker-sensing connections. This product page consolidates verified manufacturer and distributor information into an engineering-focused comparison of features, package constraints, sourcing details, and practical design considerations. It also distinguishes verified facts from parameters that still require datasheet confirmation, helping teams evaluate the TAS2555YZR without inventing missing electrical data.

詢價 聯絡我們
TAS2555YZT - 5.7W Mono Class-D Smart Amp | Texas Instruments
TAS2555YZT

TAS2555YZT - 5.7W Mono Class-D Smart Amp | Texas Instruments

The Texas Instruments TAS2555YZT is a 5.7 W mono Class-D digital-input smart amplifier with integrated speaker protection and an 8.5 V Class-H boost, delivered in a 42-ball DSBGA (YZ) surface-mount package. It combines an ultra-low-noise audio DAC, a Class-D power stage with speaker voltage and current sensing feedback, and an on-chip low-latency DSP running TI SmartAmp speaker protection algorithms, all from a 1.65 V to 1.95 V supply. A smart amplifier (SmartAmp) is a Class-D audio amplifier whose digital signal path is actively managed by an embedded DSP. Unlike a conventional analog-input Class-D stage, the TAS2555 class of device receives digital audio directly (I2S/PCM), so EQ, loudness, dynamics processing, and speaker protection are all computed on-chip rather than in an external host processor. This raises the audio subsystem from a simple power stage into a full speaker-driver SoC. Key features include 5.7 W of continuous mono output power into a 4 ohm load, an integrated Class-H boost stage that raises the internal supply rail to 8.5 V for higher peak swing, integrated short-circuit and thermal protection, and advanced on-chip EQ. Because the amplifier senses both speaker voltage and speaker current, it can estimate cone excursion and thermal condition in real time, protecting the speaker without external current-sense resistors. The part is specified for -40 degrees C to 85 degrees C ambient operation and is currently Active. Architecturally the device is a full system on a chip: the ultra-low-noise DAC converts the digital stream to analog, the Class-D modulator drives the power stage, and the low-latency DSP closes the loop with the sensing circuitry. This tight analog-digital integration is what allows the protection algorithms to react in time to prevent thermal or excursion damage at high playback levels, which is difficult to achieve with an external protection IC and a discrete amplifier. Typical applications include Bluetooth and Wi-Fi speaker products, portable speakers, soundbars, smart-home display speakers, multi-room audio nodes, and voice-assistant devices where a small, low-voltage, high-efficiency mono driver is needed. The 42-ball DSBGA package makes the part suited to compact consumer hardware where board area is limited and where a full DSP-based protection function adds value over a basic Class-D IC. When designing around the TAS2555YZT, pay close attention to layout: the speaker sensing inputs and the Class-D output stage require careful return-path planning, and the BTL output means the speaker terminals carry full swing relative to ground. Decoupling on the 1.65 V to 1.95 V rail should follow the datasheet reference layout, and the boost rail needs its own local ceramic energy reservoir for transient headroom. This page synthesizes verified distributor pricing, drop-in ordering alternatives, parameter-by-parameter comparison data, and practical layout and thermal design guidance that are not consolidated in the manufacturer datasheet itself, so engineers can qualify the part before committing to a PCB spin.

詢價 聯絡我們
TAS2557YZR - 5.7W Class-D Smart Amp | Texas Instruments
TAS2557YZR

TAS2557YZR - 5.7W Class-D Smart Amp | Texas Instruments

The Texas Instruments TAS2557YZR is a 5.7 W mono Class-D smart audio amplifier with digital input, integrated speaker protection, advanced equalization, speaker sensing, and an 8.5 V Class-H boost function, housed in a 42-pin DSBGA (YZ) package. It supports an operating temperature range of -40°C to +85°C and combines a Class-D audio power stage with digital control and system-level speaker protection. A smart amplifier is an audio amplifier that combines power conversion with digital control, monitoring, protection, or system optimization. In the product hierarchy, TAS2557YZR belongs to the Class-D amplifier category, within audio amplifiers, analog and mixed-signal integrated circuits, and ultimately the broader semiconductor family. Its digital interface allows the surrounding audio system to configure amplification behavior rather than relying only on fixed analog gain and protection thresholds. Key features include 5.7 W output power, Class-H boost support up to 8.5 V, integrated speaker protection, advanced equalization, and speaker sense. The 42-pin DSBGA package supports dense integration in space-constrained portable equipment. The manufacturer identifies the device as a full system-on-chip solution, allowing speaker amplification, monitoring, and protection functions to share one highly integrated device. Technically, the Class-D output stage offers high audio efficiency, while the Class-H boost capability expands the available internal voltage and output-energy range relative to a conventional fixed-supply Class-D amplifier. The digital input supports programmable audio-system control. Speaker protection and speaker sense are especially useful in portable products because they can help the amplifier respond to changes in speaker impedance, thermal conditions, or mechanical disturbance, depending on the configured system behavior. Typical applications include smartphones, tablets, portable speakers, Bluetooth speakers, smart displays, wearable audio devices, and other battery-powered systems where speaker output must coexist with limited board area. Mobile products benefit from the integrated protection and monitoring functions, while the small DSBGA package supports compact module and board layouts. Designers must verify the BGA land pattern, exposed-pad or thermal requirements, supported digital interface, speaker configuration, and power-supply limits against the manufacturer datasheet before layout release. Firmware, control registers, acoustic tuning, protection thresholds, and PCB thermal design are as important as the nominal 5.7 W output rating. This page consolidates verified manufacturer and distributor information, distinguishes confirmed characteristics from parameters still requiring datasheet confirmation, and provides application and design guidance without presenting unavailable electrical data as guaranteed specifications.

詢價 聯絡我們
TAS2557YZT - 5.7W Class-D Smart Amp | Texas Instruments
TAS2557YZT

TAS2557YZT - 5.7W Class-D Smart Amp | Texas Instruments

Texas Instruments TAS2557YZT is a 5.7 W digital-input mono Class-D smart amplifier with an 8.5 V Class-H boost stage, integrated speaker protection, advanced equalization, and speaker sensing. It is packaged in a 42-pin DSBGA (YZ) package for compact portable audio systems. The device combines a digital audio input, Class-D output stage, boost capability, speaker protection, and system-level audio functions in one integrated circuit. A Class-D amplifier is a switching audio amplifier that efficiently converts a digital input into a pulse-width-modulated output suitable for driving a speaker. The TAS2557 extends this product category into a smart amplifier or audio SoC. Its digital control path supports advanced EQ and system-level tuning, while integrated protection reduces the need for separate output protection circuitry in suitable designs. The headline specifications are 5.7 W output power, digital input operation, mono Class-D amplification, and Class-H boost with an 8.5 V boost capability. Speaker sense is included, allowing the device to detect a connected speaker and support speaker-protection functions. The verified ordering information identifies the TAS2557YZT specifically as the 42-pin DSBGA option. The Class-H boost function raises the internal output voltage as needed, allowing Class-D efficiency to be maintained while supporting greater output swing than a conventional fixed-voltage Class-D stage. This makes the amplifier suitable for small speakers whose impedance and power handling characteristics demand more voltage than the battery or system rail can directly provide. Typical uses include Bluetooth speakers, portable speakers, smart speakers, mobile audio accessories, consumer electronics, and other compact products where a digital audio source drives a single speaker. The integrated protection and advanced EQ features are especially useful in products requiring consistent sound output, thermal margin, and controlled behavior across different speaker loads. Designers should pay attention to the 42-ball DSBGA layout, including ball pitch, exposed thermal requirements, via-in-pad or via-under-bump construction, and the PCB footprint specified by the manufacturer. The digital interface, boost configuration, speaker-sense connection, output routing, decoupling, and thermal management must be implemented according to the manufacturer datasheet and reference design. This page consolidates verified manufacturer and distributor information, separates confirmed specifications from unavailable data, and provides practical application and sourcing guidance. It also identifies the absence of verified pin-to-pin substitute parts rather than presenting unverified replacements as drop-in choices.

詢價 聯絡我們
TAS2559YZR - 5.7W Class-D Smart Amp | Texas Instruments
TAS2559YZR

TAS2559YZR - 5.7W Class-D Smart Amp | Texas Instruments

The Texas Instruments TAS2559YZR is a 5.7 W digital-input mono Class-D smart amplifier with integrated speaker protection and stereo processing, supplied in a 42-pin DSBGA (YZ) package. It operates from 2.9 V to 5.5 V, supports an operating temperature range of -40°C to 85°C, and accepts digital audio input for compact Class-D signal-chain implementations. A smart amplifier is a system-on-chip audio device that combines a Class-D output stage with digital control, processing, and protection functions. In the broader hierarchy, it belongs to audio amplifiers, amplifier ICs, and integrated circuits. Integrating processing and speaker protection helps reduce the component count and board area required for portable and embedded audio systems while retaining programmable audio behavior. Key features include 5.7 W output capability, a mono Class-D topology, digital input, integrated speaker protection, speaker sensing, stereo processing, and Class-H boost functionality identified in the verified product and datasheet listings. These features position the device for applications requiring efficient loudspeaker drive, controlled boost behavior, and protection against speaker-related faults rather than a simple fixed-output analog amplifier. The TAS2559YZR uses Texas Instruments' Class-H boost approach to improve loudspeaker output capability while retaining a Class-D output stage. The available descriptions identify an 8.5 V boost-related implementation, but detailed boost thresholds, modulation limits, and power limits require consultation of the manufacturer datasheet. Exact speaker impedance, battery voltage, thermal conditions, and output configuration therefore determine usable audio power in the finished product. Typical uses include portable speakers, personal audio accessories, Bluetooth speaker systems, compact consumer audio products, voice-controlled devices, and other embedded audio platforms. The digital input interface allows audio data to be supplied by a host processor or audio codec, while stereo processing supports systems that need more flexibility than a conventional fixed mono amplifier. Designers should pay close attention to the 42-DSBGA layout, exposed thermal and ground-ball requirements, digital-audio routing, speaker-sensing implementation, and boost configuration. PCB layout, decoupling, thermal management, and clean return paths strongly affect Class-D performance, while protection thresholds must be validated against the impedance and power handling of the intended speaker. This product data consolidates verified manufacturer and distributor information, commercial availability, technical comparisons, and practical integration guidance. It is intended to support faster sourcing and design decisions while clearly separating confirmed specifications from parameters that still require confirmation in the manufacturer datasheet.

詢價 聯絡我們
TAS2559YZT - 5.7W Digital Smart Amplifier | Texas Instruments
TAS2559YZT

TAS2559YZT - 5.7W Digital Smart Amplifier | Texas Instruments

The Texas Instruments TAS2559YZT is a 5.7 W digital-input Class-D smart amplifier with integrated speaker protection, stereo processing, and Class-H boost, housed in a 42-DSBGA package. The device supports 1.8 V and 3.3 V supply operation and is specified for an ambient temperature range of -40°C to 85°C. It is designed for compact speaker systems where efficient digital input, protection, and sound processing can be integrated close to the transducer. A smart audio amplifier is a power-management IC and signal-processing IC combined into one system-on-chip for audio playback. Unlike a conventional analog-input Class-D amplifier, the TAS2559 accepts digital audio signals, applies programmable processing, and drives a speaker through a switching output stage. Its hierarchy is digital smart amplifier → Class-D audio amplifier → audio amplifier IC → integrated circuit and power-management semiconductor. The headline features include 5.7 W output power, integrated speaker protection, stereo processing, and Class-H boost operation with an identified 8.5 V boost rail. The digital input architecture reduces the need for a separate DAC when the source already delivers digital audio. The mono Class-D output topology is intended for efficient conversion of digital audio into a high-current speaker drive, while the integrated protection and processing functions simplify portable audio-product design. TAS2559YZT integrates amplification, digital audio processing, boost capability, and speaker protection into a single 42-DSBGA device. The 42-ball package supports compact placement in consumer, portable, and embedded audio products. Available distributor information identifies the part as a one-channel mono Class-D amplifier in a 42-DSBGA tape-and-reel package. Detailed pin assignments, ball-map functions, clock requirements, and recommended external-component values require confirmation from the manufacturer datasheet. Typical uses include Bluetooth speaker enclosures, portable speakers, smart-home audio nodes, compact soundbars, voice-assistant speakers, and other systems that combine a digital audio source with a single speaker. In such systems, digital input can shorten the signal path, integrated protection can protect the speaker and output stage, and the compact package can conserve board area. The device may also serve as a secondary Class-D amplifier in a multi-speaker architecture. Designers should verify the required I2S or other digital-audio interface, supply sequencing, boost-component selection, speaker impedance, thermal performance, and PCB land pattern against the TI datasheet. Decoupling must be placed close to the supply and ground balls, and the high-current Class-D output routing requires careful return-path and thermal design. Actual acoustic output also depends on the speaker impedance, filter selection, supply voltage, PCB thermal performance, and boost configuration. This page consolidates verified manufacturer and distributor information with package-aware comparison data, practical design notes, sourcing guidance, and explicitly qualified replacement analysis. It also distinguishes confirmed 42-DSBGA orderable variants from generic cross-reference tools that do not identify pin-compatible components.

詢價 聯絡我們
TAS5000PFB - 2-Channel PWM Audio Processor | TI
TAS5000PFB

TAS5000PFB - 2-Channel PWM Audio Processor | TI

Texas Instruments TAS5000PFB is a two-channel digital audio PWM processor supplied in a 48-TQFP package measuring 7 mm by 7 mm. Its verified supply-voltage range is 3 V to 3.6 V, making it a device for low-voltage digital audio systems. The part is identified by distributors as an audio signal processor, while the manufacturer description classifies it as a digital audio PWM processor. It is offered from authorized-channel and independent distributors, with listed unit prices ranging from $5.5493 to $8.4474 as of October 30, 2026. A digital audio PWM processor is a specialized signal-processing semiconductor that accepts digital audio information and supports the generation or control of pulse-width-modulated outputs. This broader category belongs to the hierarchy of digital signal processors, audio signal processors, and power-management ICs used in digital amplification systems. Its internal architecture is intended to bridge digital audio data and external power-stage or filtering requirements, although complete operating details must be confirmed in the manufacturer datasheet. The TAS5000PFB combines two audio channels, a 3 V to 3.6 V operating supply range, and surface-mount packaging in a 7 mm by 7 mm 48-pin TQFP device. Its two-channel organization allows a single package to address stereo audio signal generation when supported by the associated software, configuration, and external circuitry. Distributor listings also identify the device as an audio DSP and provide access to manufacturer documentation, pricing, inventory, and package information. The verified information establishes the component identity, primary device function, channel count, package type, and supply range. Detailed PWM switching frequency, supported audio data formats, clock architecture, control interfaces, numerical signal-to-noise ratio, and output-stage drive capability are not present in the supplied records and therefore require confirmation from the Texas Instruments datasheet before schematic or firmware design. The 48-TQFP footprint also makes lead pitch, exposed-pad treatment, and land-pattern requirements important package-level checks. Potential uses include digital stereo audio, powered speaker systems, active loudspeakers, compact consumer audio equipment, and sound-system subsystems in which a two-channel PWM audio processor is required. Design selection should account for the documented 3 V to 3.6 V supply range, the associated power rails, clocking requirements, supported input format, and external amplifier topology. The processor must be paired with suitable output-stage and filtering components rather than treated as a complete loudspeaker drive solution by itself. A key purchasing consideration is package and pin compatibility. The verified records identify TAS5000PFB specifically as a 48-TQFP, 7 x 7 mm device, but the supplied cross-reference search did not identify another manufacturer or Texas Instruments part confirmed to share its exact pinout, electrical behavior, and footprint. Engineers should not substitute another 48-pin audio processor solely because the package is similar; they must verify pin-by-pin compatibility and signal functionality in the manufacturer documentation. This page consolidates the supplied manufacturer-linked search results, distributor package descriptions, verified pricing references, sourcing constraints, and engineering selection guidance. It also distinguishes confirmed facts from unavailable technical fields, helping engineers locate TAS5000PFB documentation, assess supply availability, and determine whether the 48-TQFP digital audio PWM processor fits a planned design before committing to a layout or production BOM.

詢價 聯絡我們
TAS5001PFB - 2-Channel Digital Audio PWM Processor | TI
TAS5001PFB

TAS5001PFB - 2-Channel Digital Audio PWM Processor | TI

The Texas Instruments TAS5001PFB is a two-channel digital audio PWM processor with a 96 dB dynamic range, 0.08% THD+N at 1 kHz, and a 3 V to 3.6 V supply range, housed in a 48-pin TQFP package measuring 7 mm by 7 mm. Designed as a digital signal-processing core for class-D audio systems, it accepts digital audio information and generates the control signals required by a power-amplifier stage. A digital audio PWM processor is a specialized signal-processing IC positioned between a digital audio source and a class-D power stage. Unlike a conventional analog audio amplifier, it preserves much of the signal in the digital domain and controls switching outputs through pulse-width modulation. Its role in the signal chain is signal conditioning, amplification control, and system-specific audio processing. The TAS5001PFB supports two audio channels and is identified as a true digital audio amplifier processor. Its stated dynamic range is 96 dB for the device, while the manufacturer describes 93 dB dynamic range for a TAS5001 and TAS5100 system when measured at the speaker terminals. The 0.08% total harmonic distortion plus noise figure at 1 kHz indicates that the processor is intended for high-fidelity audio equipment where distortion and noise affect intelligibility and listening quality. Operation from a 3 V to 3.6 V supply suits compact digital audio products in which the processor operates from a low-voltage digital rail. The 48-TQFP package provides 48 external connections for digital-audio, control, power, clocking, and communication functions, while its 7 mm by 7 mm body supports surface-mount assembly. The associated 59.4 mW power figure identifies the device as a moderate-power digital processing component rather than a direct speaker-output power stage. Typical application roles include digital active speakers, audio docking systems, multichannel consumer-audio equipment, soundbars, home-theater electronics, and portable or networked audio products. In these systems, the TAS5001PFB can form the processing center of a digital amplifier chain, with its PWM control outputs connected to suitable class-D power-stage circuitry. Designers should verify the complete pin assignment, clock requirements, control interface, and recommended support components in the manufacturer datasheet before layout. Decoupling, grounding, exposed routing, and output-signal integrity remain critical because switching-driver activity can introduce noise and EMI into adjacent analog and radio-frequency sections. This page organizes the verified device identity, operating limits, package information, pin-compatible family alternatives, application guidance, and practical design considerations into an engineering-focused resource for evaluating the TAS5001PFB in a digital audio design.

詢價 聯絡我們
TAS5001PFBRG4 - Digital Audio PWM Processor | TI | 48-TQFP
TAS5001PFBRG4

TAS5001PFBRG4 - Digital Audio PWM Processor | TI | 48-TQFP

The TAS5001PFBRG4 is a true digital audio amplifier digital audio PWM processor from Texas Instruments, designed for high-quality digital audio amplification. It is housed in a 48-pin TQFP (7x7 mm) package and operates as a 2-channel audio signal processor. The device delivers a 96-dB dynamic range and a THD+N of 0.08% at 1 kHz, making it suitable for demanding audio applications. A digital audio PWM processor is a specialized integrated circuit that converts digital audio data (such as I2S or TDM) into a pulse-width modulated (PWM) signal that can directly drive a class-D power stage. This approach enables efficient, high-fidelity amplification by keeping the audio signal in the digital domain until the final output stage, minimizing analog distortion and noise. The TAS5001 is part of the broader class of digital audio amplifiers, which are essential in modern consumer electronics, automotive infotainment, and professional audio equipment. Key features of the TAS5001PFBRG4 include a 96-dB dynamic range, 0.08% THD+N at 1 kHz, and support for 2-channel audio processing. The device is designed to work with the TAS5100 power stage to form a complete digital amplifier system, achieving a system-level dynamic range of 93 dB measured at the speaker terminals. The PWM processor handles digital audio data with high precision, ensuring low distortion and noise. Technically, the TAS5001 employs advanced digital signal processing to generate PWM signals with minimal jitter and high linearity. It accepts standard digital audio formats and provides the necessary control signals for the external power stage. The device operates from a 3.3V supply and is specified for the industrial temperature range, making it robust for various environments. Typical applications include home theater systems, soundbars, active speakers, and automotive audio systems. The TAS5001's high dynamic range and low distortion make it ideal for applications where audio fidelity is critical. Its digital architecture simplifies system design by eliminating analog pre-amplification stages. When designing with the TAS5001, ensure proper decoupling of the power supply and careful PCB layout to minimize noise coupling. The device requires an external power stage (e.g., TAS5100) and a microcontroller for control, so plan the system interface accordingly.

詢價 聯絡我們
TAS5010PFB - 2-Channel 96 dB Digital Audio PWM Processor | TI
TAS5010PFB

TAS5010PFB - 2-Channel 96 dB Digital Audio PWM Processor | TI

The Texas Instruments TAS5010PFB is a 2-channel digital audio PWM processor in a 48-pin TQFP (7 x 7 mm) package. It is designed for true digital audio amplification systems, accepts a serial PCM digital-audio stream, and converts the audio data into a 3.3 V PWM stream. The device provides 96 dB dynamic range, operates with an I2S interface, and is identified as automotive-grade. Its role is to process digital audio data upstream of a PWM power-output stage rather than directly drive a conventional analog input amplifier. A digital audio PWM processor is part of the digital signal-processing hierarchy and can also be described as an audio DSP, PCM-to-PWM converter, or digital audio modulator. In a true digital audio amplifier system, the processor receives PCM audio data, performs the required signal conversion and modulation, and sends the resulting PWM waveform to a power-output device. This architecture keeps the audio signal in digital form through much of the signal chain, helping reduce sensitivity to analog noise and distortion. The TAS5010PFB’s principal features include 2-channel processing, 96 dB dynamic range, an I2S digital interface, 3.3 V PWM output, and a 48-TQFP package measuring 7 x 7 mm. A published device description reports THD+N of 0.08% under 1 kHz measurement conditions. These characteristics suit multichannel consumer, automotive, and powered-speaker applications where a digital source must be converted into an efficient PWM drive signal for a companion output stage. The TAS5010 is intended to be paired with a PWM power-output device such as the TAS5100 family. The processor handles the digital modulation and formatting stage, while the power device converts the 3.3 V PWM waveform into a higher-power differential output capable of driving loudspeakers. This division of responsibilities allows the audio signal path to remain digital from the PCM input through the modulator while using a dedicated power stage for speaker current and voltage swing. Typical uses include automotive head units, digital media systems, powered speakers, home-audio amplifiers, and compact consumer-audio products. The I2S interface supports connection to digital audio sources, while the two-channel architecture suits stereo reproduction. Automotive applications benefit from the device’s stated automotive-grade designation, but final suitability should be confirmed against the current manufacturer qualification documentation and the complete operating limits. Designers should treat the TAS5010PFB as a signal-processing component rather than a direct speaker driver. The PCB must preserve the differential PWM routing between the processor and its companion output device, while power and ground distribution must support clean digital switching. Review the manufacturer pin-description table and application schematic before assigning tracks because the 48-pin footprint and exact pad functions determine whether the layout is electrically and mechanically correct. This product record combines the manufacturer-classified device identity with practical system guidance: the processor converts serial PCM audio into a 3.3 V PWM stream, the TAS5100-class output device supplies speaker power, and the complete amplifier performance depends on the combined modulator, output-stage, power-supply, and layout design. The result is a concise engineering guide for evaluating the TAS5010PFB as the digital front end of a true digital audio amplifier.

詢價 聯絡我們
TAS5012PFB - Stereo 3.3V Audio PWM Processor | Texas Instruments
TAS5012PFB

TAS5012PFB - Stereo 3.3V Audio PWM Processor | Texas Instruments

The Texas Instruments TAS5012PFB is a stereo true digital audio amplifier signal processor with a 3.3 V PWM output interface, 102 dB dynamic range, and THD+N below 0.06%. It accepts 24-bit digital audio data at sampling rates including 176.4 kHz and 192 kHz, and is housed in a 48-pin TQFP package measuring 7 mm by 7 mm. The device operates from a 3 V to 3.6 V supply. A true digital audio amplifier separates digital signal processing from power amplification. The TAS5012 accepts a serial PCM audio stream, performs the required digital audio processing, and generates a differential 3.3 V PWM stream. A compatible external power-output device converts that PWM stream into a high-current audio signal capable of driving a loudspeaker load. This architecture reduces analog signal-path distortion while allowing system behavior to be controlled digitally. Key characteristics include support for two audio channels, a 102 dB dynamic-range specification, and THD+N below 0.06%. The processor supports digital interfaces identified as DSP and I2S, making it suitable for audio systems receiving serial PCM data from a digital source. Its stated power efficiency of 90% into an 8-ohm load describes a complete true digital audio amplifier system using the processor with its compatible PWM power stage, rather than an isolated measurement of the processor alone. The 24-bit input capability and support for 176.4 kHz and 192 kHz sampling make the TAS5012 suitable for high-resolution consumer audio, CD-rate playback, digital mixing equipment, powered speakers, and automotive audio systems. Its 48-TQFP package provides a practical solution for multichannel digital audio designs where external amplification and digital control are preferred over a conventional analog output amplifier. Implementation requires careful selection of the companion PWM power device, differential output routing, clocking, digital interface timing, grounding, and decoupling. The processor and output stage must be designed together because their PWM signaling, timing, and load capabilities determine the achievable output power and distortion performance. This page consolidates the key electrical characteristics, practical applications, package information, sourcing guidance, and same-footprint replacement options for engineers evaluating the TAS5012PFB. It also provides a structured framework for comparing the processor with other true digital audio amplifier signal-processing devices before committing a high-volume PCB design.

詢價 聯絡我們
TAS5015PFB - 2-Channel 112dB Digital Audio PWM Processor | TI
TAS5015PFB

TAS5015PFB - 2-Channel 112dB Digital Audio PWM Processor | TI

Texas Instruments TAS5015PFB is a 2-channel true digital audio amplifier digital audio PWM processor with 112 dB dynamic range, THD+N below 0.01%, and 90% power efficiency into an 8-ohm load. The device accepts 24-bit input data and supports 176.4 kHz operation, making it suitable for high-resolution digital audio amplification systems. It is packaged in a 48-TQFP (7x7 mm) surface-mount package. A digital audio PWM processor is a specialized audio signal-processing IC that accepts digital audio data and controls power-converter switching to reproduce an analog audio waveform at the speaker or headphone output. Within the product hierarchy, it combines a digital signal processor, a digital audio interface, and a class-D-style PWM power stage, while remaining distinct from conventional analog audio amplifiers. The TAS5015PFB is designed to place amplification and digital processing close to the load, reducing noise susceptibility in sensitive audio paths. The principal performance features include 112 dB dynamic range, THD+N below 0.01%, 24-bit input-data support, and 176.4 kHz operation. Its 90% efficiency into an 8-ohm load reduces the heat generated during high-output audio playback compared with less efficient amplification approaches. The 48-TQFP (7x7 mm) package provides a defined surface-mount footprint for professional audio, home-theater, communication, and embedded audio equipment. The device combines digital audio processing with PWM output generation, allowing system-level features such as digital volume control and signal conditioning to be handled inside the amplification stage. This architecture is useful when a product requires high-resolution audio data to remain digital through much of the signal chain. Exact pin assignments, control-register details, thermal limits, and application-specific output-stage requirements should be confirmed against the manufacturer datasheet and pin-description table. Typical applications include powered speakers, soundbars, home-theater receivers, digital audio racks, professional monitor systems, and embedded audio products. The 2-channel configuration suits stereo systems, while the high dynamic range and low distortion target applications where audible noise or nonlinear distortion would compromise playback quality. The 90% efficiency rating into 8 ohms is particularly relevant to compact systems with limited thermal dissipation. When designing around TAS5015PFB, preserve the power and ground connections required by the PWM output stage, place output-filter and bypass components close to the package, and account for the heat generated at high output power. Confirm that the selected speaker impedance, supply voltage, output filter, and amplifier configuration match the datasheet guidance before production release. This page combines the confirmed device specifications, package information, drop-in alternative status, pricing structure, and practical design guidance for engineers evaluating the TAS5015PFB in digital audio amplifier designs.

詢價 聯絡我們
TAS5026APAG - 6-Ch Digital Audio PWM Processor | TI
TAS5026APAG

TAS5026APAG - 6-Ch Digital Audio PWM Processor | TI

The TAS5026APAG is a six-channel digital audio PWM processor from Texas Instruments, part of the PurePath Digital™ family. It integrates a modulator that converts digital audio data into PWM signals for driving external power stages, enabling high-efficiency Class-D amplification. The device operates from a 3V to 3.6V supply and is packaged in a 64-pin TQFP (10x10 mm). It interfaces via I2C and I2S, making it suitable for multi-channel audio systems. A digital audio PWM processor is a specialized DSP that converts digital audio streams (e.g., I2S) into pulse-width modulated signals. These PWM signals drive switching power stages, which then feed speakers through passive LC filters. This architecture achieves high efficiency (>90%) compared to linear amplifiers, reducing heat and power consumption in consumer and professional audio equipment. Key features include six independent channels, I2C control for configuration, and I2S input for digital audio. The device supports sample rates up to 192 kHz and provides advanced processing like volume control and dynamic range compression. Its 64-TQFP package offers a compact footprint for multi-channel designs. Technically, the TAS5026APAG employs a digital modulator with noise shaping to achieve high signal-to-noise ratio. It is designed to work with TI's PurePath Digital power stages, such as the TAS5121, which can deliver up to 100W into 4Ω speakers. The PWM output is optimized for minimal distortion and jitter. Typical applications include home theater receivers, AV receivers, soundbars, and active speakers. The device's multi-channel capability and digital interface make it ideal for surround sound systems. It is also used in automotive infotainment and professional audio equipment. When designing with the TAS5026APAG, ensure proper decoupling of the 3.3V supply and careful PCB layout to minimize noise. The I2C interface allows real-time control of volume and mute functions. Note that the device is now obsolete, so consider alternative parts for new designs.

詢價 聯絡我們
TAS5026PAG - 6-Channel Digital Audio PWM Processor | TI
TAS5026PAG

TAS5026PAG - 6-Channel Digital Audio PWM Processor | TI

The Texas Instruments TAS5026PAG is a 6-channel digital audio PWM processor packaged in a 64-pin TQFP measuring 10 mm by 10 mm. It belongs to the digital signal processing and audio-control hierarchy, where a digital audio processor accepts digital audio information and controls an associated class-D-style PWM output stage. The device is supplied in tray packaging according to the published product listing. A digital audio PWM processor is a mixed-signal audio IC that combines digital processing, modulation control, and power-stage supervision. Its role differs from a conventional audio codec: instead of focusing only on analog-to-digital and digital-to-analog conversion, a PWM processor manages digital audio data, PWM modulation, output-stage control, and protection functions for multi-channel audio systems. The TAS5026PAG is therefore positioned as a central audio-control device within a larger digital amplification architecture. The principal feature of the TAS5026PAG is its six-channel digital audio processing architecture. This makes it relevant to designs requiring coordinated control of multiple audio outputs, including powered speakers, soundbars, home-theater equipment, and multichannel digital amplification systems. Its 64-pin TQFP package provides the connection density required for digital audio data, control signals, power-management interfaces, and external circuitry. Operationally, the processor separates digital audio command processing from the external power-amplifier stage. Digital audio information is processed before being converted into the switching-control information required by a PWM power stage. This architecture can simplify system partitioning when a design separates signal processing from high-current output amplification, while still requiring suitable external MOSFET stages and passive networks. Typical applications include digital active speakers, compact home-theater systems, multimedia speaker platforms, soundbar amplification, and other multichannel audio products. The processor is most appropriate when the product architecture already uses digital audio signals and PWM class-D output stages. It is less suitable for conventional analog-only amplifier designs that do not include a compatible digital control interface. The primary design consideration is PCB integration. Because the device controls a multichannel PWM audio architecture, its digital, analog, power, and return paths must be routed with care. Keep switching-current loops away from audio and control signals, use a continuous ground reference, place input and output decoupling close to the device, and follow the manufacturer datasheet layout and component recommendations for the selected power-stage topology. This page organizes the verified device identity, package information, source documentation, comparison candidates, and engineering guidance into a practical design reference. It also distinguishes confirmed drop-in replacements from comparison-only candidates, helping engineers determine whether a board-level substitution is technically justified before committing to a redesign.

詢價 聯絡我們
TAS5028PAG - 8-Ch Digital Audio PWM Processor | TI
TAS5028PAG

TAS5028PAG - 8-Ch Digital Audio PWM Processor | TI

The Texas Instruments TAS5028PAG is an 8-channel digital audio PWM processor packaged in a 64-pin TQFP measuring 10 mm by 10 mm. It is designed for digital audio systems requiring a dedicated multi-channel pulse-width-modulation output stage and is intended to interface with audio digital signal processors. The processor operates across a stated temperature range of 0 °C to 70 °C. A digital audio PWM processor is a mixed-signal audio IC that accepts digital audio information and generates PWM control signals for a multichannel power-amplifier design. Within the broader semiconductor hierarchy, it belongs to the audio special-purpose IC category, connects digital audio processing with an external amplification stage, and ultimately supports loudspeaker or headphone drive systems. Its eight-channel architecture consolidates parallel audio-channel control into one integrated device. The principal verified feature is support for eight PWM channels in one 64-TQFP package. According to the Texas Instruments TAS5028 product information, the device automatically adjusts its control configurations and is designed to interface seamlessly with most audio digital signal processors. This integration can simplify system partitioning by moving repetitive PWM generation away from a host DSP and into a dedicated companion processor. The package and ordering information identify TAS5028PAG as the PAG package option with 64 pins and a 10 mm by 10 mm body. That relatively high pin count provides dedicated external connections for multiple channels and associated control functions. Because the verified search results do not expose the complete electrical limits, detailed pin assignments, signal timing, or performance graphs, those values should be confirmed in the manufacturer datasheet before final schematic, layout, or signal-integrity work. Typical uses include multichannel active speaker systems, soundbars, home-theater receivers, powered speaker crossovers, compact consumer audio products, and other multichannel digital-audio designs. In these applications, the TAS5028PAG can receive processed audio information from a digital signal processor and produce the PWM signals required by an external bridge-style power stage. The primary design consideration is to treat the PWM outputs as high-current, fast-transitioning signals and preserve a clean return path from the external amplifier stage. Layout should follow the manufacturer guidance for decoupling and output routing, while the system designer should verify thermal performance and EMI behavior with the selected power-stage topology. This page combines the verified manufacturer identification, package information, distributor availability, observed pricing, and documented cross-reference findings. It also adds drop-in candidate analysis, application guidance, comparison parameters, and practical design cautions that are not consolidated on a standard distributor listing.

詢價 聯絡我們
TAS5066PAG - 6-Channel 24-Bit PWM Audio Processor | TI
TAS5066PAG

TAS5066PAG - 6-Channel 24-Bit PWM Audio Processor | TI

Texas Instruments TAS5066PAG is a six-channel, 24-bit digital audio PWM processor with a 64-TQFP package measuring 10 mm by 10 mm. It operates from a 3 V to 3.6 V supply, supports sample rates from 44.1 kHz to 192 kHz, and provides I2S and I2C interfaces for digital audio data transfer and configuration. The device is designed to generate PWM-based audio output signals for multichannel audio power amplifier systems. A digital audio PWM processor is an interface and signal-generation IC positioned between a digital audio source and a class-D-style output stage. Its hierarchy is digital audio processor, audio interface IC, integrated circuit, and semiconductor. Rather than directly driving a conventional analog input, it accepts digital audio data and produces PWM control information for compatible power stages. This division of responsibilities allows a system to retain a digital audio datapath while placing the high-current, high-voltage amplification function in a dedicated power stage. The TAS5066PAG provides six processing channels, a 24-bit audio data resolution, and support for audio sample rates ranging from 44.1 kHz through 192 kHz. These parameters suit multichannel consumer, communications, and embedded audio designs in which multiple synchronized output channels are required. The 3 V to 3.6 V operating range also places the device in power domains commonly used by digital audio logic. I2S supports synchronized audio streaming, while I2C provides a separate control path for configuration and register access. The device integrates digital audio processing and PWM generation in one 64-pin TQFP package. According to the Texas Instruments TAS5066 datasheet, the supported initialization procedures cover changing data rates and switching between master and slave operating modes. Master mode provides a device-generated timing reference, whereas slave mode allows the processor to synchronize with an external audio master. These operating modes support integration into systems where the clock and sample-rate architecture must follow a central audio controller. Typical uses include multichannel powered speakers, audio docking systems, home entertainment equipment, and compact digital audio subsystems. The six-channel architecture can feed a bank of compatible output stages, while the broad sample-rate range covers CD-rate 44.1 kHz sources as well as higher-rate 48 kHz, 96 kHz, and 192 kHz streams. The Texas Instruments TAS5111DAD is a relevant output-stage companion because it is designed to work with TAS5066-family digital audio processing in PurePath applications. A primary design consideration is digital clocking. I2S data, master or slave timing, and sample-rate changes must be coordinated to prevent channel misalignment. The 64-TQFP footprint also requires careful fanout of power, ground, clock, data, and control signals. Use the manufacturer pin-description table and recommended application schematic when assigning PCB tracks and configuring the device registers. This product page consolidates the confirmed TAS5066PAG electrical limits, interface capabilities, package details, sourcing parameters, and verified drop-in cross-reference into an engineering-oriented reference. It also identifies the Texas Instruments TAS5111DAD as a companion output stage and explains the clocking, layout, and replacement considerations that matter when designing a six-channel digital audio PWM subsystem.

詢價 聯絡我們
TAS5076PFC - 6-Channel Digital Audio PWM Processor | TI
TAS5076PFC

TAS5076PFC - 6-Channel Digital Audio PWM Processor | TI

Texas Instruments TAS5076PFC is a six-channel digital audio PWM processor packaged in an 80-pin TQFP measuring 12 mm by 12 mm. The device is identified as an audio modulator and belongs to the broader digital signal processing and power-management ecosystem used to convert digital audio information into PWM drive signals for multichannel Class-D audio power stages. Its defining product characteristics are six processing channels, digital audio PWM processing, and a square 80-terminal surface-mount package. A digital audio PWM processor is an application-specific integrated circuit that accepts digital audio data and generates PWM signals suitable for controlling audio power stages. Unlike a conventional analog audio amplifier, the TAS5076PFC performs digital-to-PWM conversion and associated channel control. It sits between an audio source or digital interface and one or more external Class-D output stages, making it useful in home-theater systems, powered speakers, automotive audio, and professional audio equipment. The TAS5076PFC provides six-channel PWM processing in a single device, which can simplify system integration compared with a design using multiple discrete or single-channel digital audio converters. Its surface-mount TQFP construction supports automated PCB assembly and high-density equipment designs. The 12 mm by 12 mm body is larger than a typical QFP, but it provides 80 terminals and sufficient routing flexibility for multichannel digital and power-control connections. As a special-purpose audio processor, the TAS5076PFC is intended for digital signal processing rather than general-purpose computation. Its internal architecture and register interface determine how digital audio data is accepted, distributed across six channels, and converted into PWM outputs. Exact interface timing, supported audio data formats, clock requirements, output characteristics, and control-register functions should be confirmed in the manufacturer datasheet before a circuit is released. Typical applications include powered home-theater speakers, multichannel amplifier modules, automotive head-unit audio systems, digital active speakers, and professional monitoring equipment. In each case, the processor can provide a coordinated six-channel PWM generation function while leaving the final high-current audio output stage to appropriately rated external hardware. Actual channel implementation depends on the supported digital-audio format and the system amplifier architecture. The primary design consideration is ensuring that the digital source format, clocking, ground distribution, and PWM routing satisfy the device requirements. Place decoupling close to its supply terminals, route sensitive digital signals over a continuous reference plane, and use the pin-description table in the manufacturer datasheet when assigning PCB tracks. Because the processor does not directly replace a high-power output transistor array, external power stages and their thermal design remain part of the complete amplifier solution. This product record combines the verified identity of the TAS5076PFC with packaging information, sourcing guidance, and a structured review of what engineers must confirm in the datasheet. It also distinguishes confirmed replacement information from unavailable pin-level, timing, and compliance details, helping designers assess fit before beginning layout or firmware development.

詢價 聯絡我們
TAS5086DBT - 6-Channel Digital Audio PWM Processor | Texas Instruments
TAS5086DBT

TAS5086DBT - 6-Channel Digital Audio PWM Processor | Texas Instruments

The Texas Instruments TAS5086DBT is a six-channel digital pulse-width modulation audio processor with four serial audio inputs representing eight input channels, support for 16-, 20-, or 24-bit data, and operation from 3 V to 3.6 V. The device is supplied in a 38-pin TSSOP (DBT) package and is designed to drive six speaker channels in single-ended or bridge-tied configurations. A digital audio PWM processor is an integrated circuit that accepts digital audio samples and converts them into high-speed PWM outputs suitable for controlling switching power stages. Within the broader hierarchy, the TAS5086DBT is a digital signal controller, a specialized DSP, and a system-integration IC for multichannel Class-D audio amplification. Its integrated control functions reduce the amount of external digital processing required in home-theater, multimedia, and powered-speaker systems. Key capabilities include automatic detection of master-clock and data-sample rates, four serial audio inputs carrying eight channels, and support for 32-, 44.1-, 48-, 88.2-, 96-, 176.4-, and 192-kHz sampling rates. Input word lengths of 16, 20, or 24 bits allow compatibility with common audio processors and MPEG decoders. Six independently controlled PWM outputs support either six single-ended loads or three bridge-tied loads when fewer amplifier channels are required. The TAS5086DBT architecture integrates digital audio input handling, PWM modulation, speaker-output control, and communication with a host processor. This integration provides a practical bridge between a digital audio decoder and external power stages. Exact clock requirements, PWM output timing, electrical limits, and thermal characteristics must be confirmed in the manufacturer datasheet before finalizing a high-power design. Typical uses include 5.1-channel home-cinema amplification, active multimedia speakers, digital soundbars, powered subwoofers, and compact consumer audio systems. Its multiple serial inputs and six-channel output capability suit systems in which one device receives several decoded audio streams and coordinates multiple speaker drive channels. The IC is intended to work with appropriately designed external switching power stages and speaker drivers. A key design consideration is that digital audio correctness depends on proper clocking, data alignment, and channel mapping. The PCB should provide a short, controlled return path for switching-node energy, while the analog and digital grounds should follow the manufacturer’s recommended layout and decoupling arrangements. Verify the external MOSFET, gate-driver, filter, and thermal solution against the datasheet before production. This product page consolidates verified manufacturer facts, distributor sourcing information, ordering-code differences, comparison data, and practical design cautions. It is intended to accelerate component selection while explicitly identifying electrical details that remain unavailable in the supplied source snapshot.

詢價 聯絡我們
TAS5101DAP - 2x15W True Digital Stereo Class D Power Stage | Texas Instruments
TAS5101DAP

TAS5101DAP - 2x15W True Digital Stereo Class D Power Stage | Texas Instruments

The Texas Instruments TAS5101DAP is a true digital stereo audio power stage delivering 2 x 15 W RMS into 4 ohm loads, with greater than 95 dB dynamic range, 0.1 % THD+N, and more than 90 % efficiency into an 8 ohm load, all in a 32-pin HTSSOP (DAP) package with exposed thermal pad. It is a Class D (D-class) digital audio power amplifier that accepts a 3.3 V stereo PWM input and produces single-ended outputs, and it is designed to work with a digital audio host processor in the TAS50xx family. A digital audio power amplifier converts audio data into a full-power digital PWM stream that is then reproduced by a switching output stage. Because the signal stays in the digital domain until the final switching transistors, distortion products do not accumulate through an analog chain, and amplifier performance becomes a function of the digital word stream rather than of analog linearity. Within the amplifier IC category, the TAS5101DAP sits between a digital audio host (for example TAS5000PFB) and the loudspeaker, forming the output-power stage of a true digital amplification system. Key features include TI equibit technology for channel-to-channel matching, greater than 90 % power efficiency that shrinks the required power supply and heat sink, single-ended output configuration for simplified speaker connection, and a low-profile surface-mount HTSSOP-32 footprint with an exposed pad for thermal dissipation. Dynamic range above 95 dB in a TDAA system means the power stage contributes very little of its own noise to the overall audio path. Technically, the device is a true digital amplifier rather than a self-contained analog-input Class D codec. It requires an external PWM-capable digital audio processor, and the host must supply the 3.3 V stereo PWM signal. Because there is no analog input stage, there is no analog volume control inside the part; gain and volume are handled upstream in the digital domain, which is what allows the power stage to remain a small, efficient, and reproducible module. Typical applications include powered loudspeakers, home theater and active speaker systems, digital mixer consoles, multi-room networked audio amplifiers, soundbar and flat-panel television audio, and professional monitor amplifiers where the 2 x 15 W per channel capability and high efficiency keep thermal mass and cost low. The key design consideration is heat: even at 90 % efficiency, a 30 W stereo output dissipates several watts in the output stage, so the exposed pad must be soldered to a generously sized ground copper pour, and the host must be able to deliver a clean 3.3 V PWM stream with matched channel timing. Place the decoupling capacitors directly across the supply and ground pins on the pad side of the package to keep switching current loops tight. This page combines manufacturer specification data, a parameter-by-parameter drop-in comparison, and practical layout and thermal guidance that goes beyond the basic orderable information normally published for this amplifier.

詢價 聯絡我們
TAS5102DAD - 20W Stereo Class-D Power Stage | Texas Instruments
TAS5102DAD

TAS5102DAD - 20W Stereo Class-D Power Stage | Texas Instruments

Texas Instruments TAS5102DAD is a 20-W stereo, PWM-input Class-D audio amplifier power stage with a 2-channel bridge-tied-load output architecture and an 8-V to 23-V supply range. The device is offered in a thermally enhanced 32-pin HTSSOP DAD package with an exposed pad, giving the output stages a compact surface-mount implementation for powered speakers and other audio systems. A Class-D audio amplifier is a switching power stage that converts a PWM input into a high-frequency, high-current bridge-tied-load waveform. This approach belongs to the amplifier IC and power-management semiconductor hierarchy and can provide high output efficiency compared with a conventional linear output stage. The TAS5102 family is intended for audio systems where a digital audio source supplies PWM signals and the power stage must drive an 8-ohm speaker load. The manufacturer identifies 20-W and 15-W stereo output capability and specifically states 18 W per channel into an 8-ohm BTL load at 10% THD+N with a heatsink. Other highlighted characteristics include greater than 100-dB A-weighted SNR and less than 0.1% THD+N at 1 W. These values define useful operating points but should not be interpreted as guarantees across every supply voltage, temperature, filter, and thermal condition. The TAS5102DAD is an integrated power stage rather than a complete host audio processor. Its PWM inputs allow connection to a digital audio DAC or audio processor, while external output inductors and LC filtering convert the bridge-tied-load waveform into a filtered speaker drive. Differential outputs also eliminate the need for output coupling capacitors when the recommended speaker filter is implemented correctly. Typical applications include stereo powered speakers, active bookshelf speakers, compact multimedia speakers, soundbar power stages, and other consumer audio products accepting PWM input. The 8-V to 23-V supply range suits systems using a bus above the 5-V rail level, while the exposed thermal pad allows heat to spread through the PCB and an optional heatsink to extend continuous-output capability. For a new design, follow the manufacturer datasheet for the exact PWM input logic, differential output filtering, component values, exposed-pad land pattern, thermal layout, and bypass-capacitor requirements. Pay particular attention to output-filter selection because speaker current, filter losses, and switching-edge behavior can materially affect both output power and thermal rise. This page consolidates the verified manufacturer and distributor information for TAS5102DAD, maps the important output and thermal constraints, identifies qualification limits, and provides application-focused engineering guidance. It also documents where complete pin-level and electrical details must be confirmed in the TI datasheet before schematic release or PCB implementation.

詢價 聯絡我們
TAS5103DAP - 15W Stereo PWM Class-D Amplifier | Texas Instruments
TAS5103DAP

TAS5103DAP - 15W Stereo PWM Class-D Amplifier | Texas Instruments

The Texas Instruments TAS5103DAP is a 15 W stereo, PWM-input, open-loop Class-D audio power amplifier with an 8 V to 23 V supply range, housed in a 32-pin HTSSOP DAP package. It drives an 8 ohm bridge-tied load and provides two integrated stereo output channels for audio systems requiring a digital power stage without a conventional analog input stage. A Class-D audio amplifier is a switching power amplifier that converts PWM signals into high-frequency bridge-tied output currents. It belongs to the amplifier IC hierarchy, where Class-D topology -> audio power amplifier -> audio signal-processing IC -> semiconductor. Compared with an analog linear output stage, a properly filtered Class-D design can provide high output power with lower power dissipation, although output filtering and electromagnetic compatibility remain important design considerations. The TAS5103 is designed to deliver up to 15 W per channel into an 8 ohm bridge-tied load from an 8 V to 23 V supply. Its integrated digital power stages support stereo audio amplification, while its PWM input architecture allows a digital audio processor to control the output waveform directly. The device also incorporates an advanced protection system and is intended for low-cost, high-fidelity audio systems built around compatible digital signal processing and codec chips. The architecture separates PWM signal generation from output-current amplification. This makes the TAS5103DAP appropriate for systems in which a host processor, audio codec, or dedicated modulator produces differential PWM signals. The class-D output stage then develops the full bridge-tied speaker voltage. Compared with a conventional analog-input amplifier, this arrangement can reduce the number of signal-chain stages and supports deterministic digital control of the speaker drive. Typical uses include powered speakers, compact stereo systems, sound bars, automotive audio modules, and other low-voltage audio products. Designers should select the modulation method, differential routing, output filtering, and speaker network together with the amplifier because PWM timing, dead time, switching noise, and output inductance directly affect fidelity and electromagnetic emissions. A critical layout requirement is a short, symmetric output path between the device, LC filter, and speaker connector. Keep switching-current loops compact, use a continuous ground plane, and follow the manufacturer datasheet for component selection and thermal pad layout. Adequate copper around the exposed pad supports heat transfer from the power stage into the PCB. This page combines the official product parameters with application guidance, package information, sourcing questions, and drop-in-replacement analysis. It also identifies the boundaries of the available replacement evidence so engineers can avoid assuming that a similar Class-D amplifier is electrically and physically interchangeable.

詢價 聯絡我們
TAS5110DAD - 50W Stereo Class-D Power Stage | TI
TAS5110DAD

TAS5110DAD - 50W Stereo Class-D Power Stage | TI

The Texas Instruments TAS5110DAD is a 2-channel stereo Class-D true digital audio amplifier power stage designed to deliver 50 W RMS per channel into a 4-ohm load at 10% THD, packaged in a 32-pin HTSSOP. It operates as the output stage in a true digital audio architecture and accepts a 3.3 V PWM audio stream from a compatible digital audio modulator. The device supports 40 W RMS per channel at 0.1% THD, producing 93 dB dynamic range in a TDAA system. A true digital audio amplifier, or TDAA, separates digital signal processing from analog power amplification. In this architecture, a dedicated PCM-to-PWM processor converts digital audio into a differential PWM signal, while the TAS5110DAD performs the high-current power-stage function. This separation can improve efficiency, reduce analog signal-path complexity, and support digital volume and channel control when paired with a suitable modulator. The TAS5110DAD's principal output capability is 50 W RMS per channel at 10% THD. At the more stringent 0.1% THD condition, each channel can deliver 40 W RMS. Typical total harmonic distortion plus noise is below 0.09% with a 1 kHz input signal, making the stage appropriate for high-power stereo audio systems where low clipping distortion is important. Its efficiency can exceed 90%, reducing heat generation and power-supply demand compared with inefficient linear output stages. The device incorporates TI equibitt technology and operates within a true digital audio system rather than accepting conventional analog audio directly. A compatible TAS50xx digital audio PWM processor performs the required signal conversion. This architecture is useful when a design benefits from digital control, compact system implementation, or elimination of a conventional analog input and voltage-gain amplifier stage. The external power architecture and load capability still require careful layout and thermal planning. Typical applications include powered stereo speakers, home-theater and multimedia amplifiers, compact consumer audio systems, digital active speakers, and industrial audio equipment operating from suitably rated power supplies. The 50 W per-channel output target is suitable for demanding speaker loads, while the high-efficiency Class-D output stage helps reduce board-space requirements compared with a linear amplifier of similar output power. The main design consideration is the power path. Use a low-impedance power supply and ground layout, keep high-current switching loops compact, and provide robust filtering between the switching output and sensitive audio circuitry. Thermal performance depends on the exposed package thermal pad, copper area, airflow, enclosure temperature, and sustained output level, so thermal performance must be verified in the finished enclosure rather than estimated from the package name alone. This product page organizes the TAS5110DAD specifications, verified source links, application guidance, design notes, and replacement considerations into one engineering reference. The technical emphasis is on output power, distortion, efficiency, digital-system integration, thermal implementation, and the practical differences between documented device variants.

詢價 聯絡我們
TAS5110DAP - 50W Stereo Class-D Power Stage | Texas Instruments
TAS5110DAP

TAS5110DAP - 50W Stereo Class-D Power Stage | Texas Instruments

Texas Instruments TAS5110DAP is a stereo Class-D digital audio power stage rated for 50 W RMS per channel at 10% THD and 40 W RMS per channel at 0.1% THD. It uses Texas Instruments Equibitt true-digital audio amplification technology, provides 93 dB dynamic range in a TDAA system, and operates from a 32-pin HTSSOP package with an exposed thermal pad. The device is designed to work with a TAS50xx digital audio PWM processor rather than as a conventional analog-input Class-D amplifier. A true digital audio amplifier, or TDAA, is a power-management and signal-processing IC that converts digital audio data into a high-power PWM output stage. Within the broader hierarchy, it combines a digital audio processor with a switching power stage to provide efficient low-distortion speaker drive. The TAS5110DAP handles the power-amplifier role, while the associated TAS50xx processor manages digital audio decoding, modulation, channel control, and system-level audio functions. Key features include 50 W RMS output at 10% THD, 40 W RMS output at 0.1% THD, typical THD+N below 0.09% with a 1 kHz input signal, and 93 dB dynamic range in a TDAA system. Its power efficiency can exceed 90%, reducing the heat dissipation and enclosure size normally associated with high-output audio amplification. The integrated exposed-pad package supports removal of power-stage heat through the PCB copper area. Technically, the TAS5110DAP operates as a dual-channel PWM power output stage. Each channel can deliver 50 W RMS under the stated 10% THD condition, while the lower-distortion 0.1% THD condition supports 40 W RMS per channel. The published 93 dB dynamic-range figure applies to a complete TDAA system rather than an isolated analog-input amplifier. This distinction is important when comparing it with conventional analog Class-D or Class-AB audio amplifiers. Typical applications include home-theater and active-speaker systems, compact stereo amplifiers, powered subwoofers, digital audio racks, and consumer television or set-top equipment. The TAS5110DAP is particularly appropriate where a digital audio signal is already available, system efficiency matters, and analog-to-digital conversion should be avoided. It can also be paired with an external digital PWM processor to create a complete true-digital amplification channel. Designers should use the manufacturer datasheet for the exact supply limits, pin assignments, exposed-pad land pattern, thermal data, and recommended output-filter values. PCB layout must provide a low-impedance power and ground path, adequate decoupling, controlled switching-node routing, and a substantial thermal copper area beneath the exposed pad. Thermal performance depends strongly on the board copper, thermal vias, enclosure, and sustained output level. This product record combines the TAS5110DAP power-output specifications, package information, application context, engineering guidance, and structured comparison fields. It also distinguishes the device from analog-input audio amplifiers by explaining the required digital audio processor, PWM architecture, efficiency considerations, and PCB constraints that materially affect a practical high-power design.

詢價 聯絡我們