積體電路

子分類

📁 ADC/DAC 3,100+ 產品 📁 放大器 IC 1,700+ 產品 📁 音訊編解碼器 18 產品 📁 音訊 IC 2 產品 📁 時脈與計時 640+ 產品 📁 Comparator ICs 1 產品 📁 DSP 1,100+ 產品 📁 資料擷取 IC 2 產品 📁 數位電位器 4 產品 📁 顯示驅動器與控制器 1 產品 📁 FPGA 與 CPLD 7,100+ 產品 📁 介面 IC 3,000+ 產品 📁 LED 驅動器 1 產品 📁 邏輯 IC 450+ 產品 📁 記憶體 IC 870+ 產品 📁 微控制器 20,000+ 產品 📁 微處理器 4 產品 📁 馬達驅動器 1 產品 📁 其他 1 產品 📁 感測器與偵測器介面 1 產品 📁 特殊用途 IC 15 產品 📁 視訊 IC 13 產品

產品（38,000+)

TLV2620ID - 11MHz RRO Op Amp with Shutdown | Texas Instruments
TLV2620ID

TLV2620ID - 11MHz RRO Op Amp with Shutdown | Texas Instruments

The Texas Instruments TLV2620ID is a single operational amplifier with rail-to-rail output, an 11 MHz gain-bandwidth product, and a 5.5 V maximum supply voltage. Designed for low-voltage, wide-bandwidth signal conditioning, the device includes a shutdown function and is packaged in an 8-pin SOIC. The TLV2620ID is suited to portable instrumentation, sensor interfaces, audio signal paths, and general-purpose analog systems that require a compact CMOS amplifier. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its differential inputs. It belongs to the broader hierarchy of analog ICs, semiconductor devices, and signal-conditioning components. The TLV2620ID uses rail-to-rail output operation, allowing its output signal to approach the available supply rails under suitable load and output conditions. This characteristic is useful in low-voltage systems where conventional fixed-output amplifiers would waste signal range. The principal highlighted specifications are an 11 MHz gain-bandwidth product, operation from a single supply with a 5.5 V maximum rating, and rail-to-rail output capability. The product family is also described as a low-power, wide-bandwidth amplifier with shutdown. Its single-channel configuration keeps the component count low in designs requiring one amplified signal path, while the small SOIC package supports conventional surface-mount assembly. The TLV2620ID combines wide bandwidth with a modest maximum supply voltage, making it appropriate for systems operating from low-voltage rails. Its 11 MHz bandwidth provides more signal-path range than a low-frequency precision amplifier and makes the device suitable for moderate-speed sensing and interface tasks. The shutdown feature can reduce power consumption when the active circuit is not required, although the exact shutdown timing and current values should be confirmed in the manufacturer datasheet. Typical applications include portable sensor conditioning, low-voltage audio circuits, communications interfaces, industrial measurement systems, and general-purpose buffer stages. The rail-to-rail output can improve usable dynamic range in single-supply systems, while the 11 MHz bandwidth is beneficial when the amplifier must process signals beyond low-frequency instrumentation ranges. Shutdown is useful in portable equipment where power conservation during inactive periods is important. PCB design should place input and output decoupling close to the appropriate supply pins and keep sensitive input traces away from high-current switching paths. Confirm the complete pin assignment, input common-mode range, output-load limits, and recommended operating conditions in the manufacturer datasheet before finalizing a high-impedance or precision application. This product page organizes the TLV2620ID specifications, package information, sourcing details, verified drop-in references, application guidance, and design considerations for faster engineering evaluation and board-level planning.

詢價 聯絡我們
TLV2620IP - 11 MHz RRO CMOS Op Amp with Shutdown | Texas Instruments
TLV2620IP

TLV2620IP - 11 MHz RRO CMOS Op Amp with Shutdown | Texas Instruments

Texas Instruments TLV2620IP is a single, 5.5-V, 11-MHz rail-to-rail input and output CMOS operational amplifier with shutdown, offered in an 8-PDIP through-hole package with 0.300 inch (7.62 mm) lead pitch. It is a general-purpose precision amplifier designed for low-voltage, low-noise signal conditioning where a shutdown pin is needed to cut supply current in standby. What is a rail-to-rail operational amplifier? A rail-to-rail (RRO) input and output amplifier is an operational amplifier whose input common-mode range and output swing extend to the positive and negative supply rails, so it can process signals from 0 V up to the full supply voltage without clipping. In the device hierarchy an operational amplifier is a linear amplifier IC within the broader amplifier and analog signal-chain family, and the TLV2620 family belongs to TI's low-power, wide-bandwidth single-supply op amp line. Key features of the TLV2620IP include an 11 MHz gain-bandwidth product for single-supply operation up to 5.5 V, rail-to-rail input and output swing, an integrated shutdown control for supply-current management, and a CMOS input stage that offers low input bias current with high input impedance. The single-amplifier configuration keeps the footprint small while still supporting standard feedback networks and unity-gain stable operation for buffer and gain stages. Technically, the amplifier operates from a single positive supply, so the negative supply pin is tied to ground. Its wide bandwidth makes it suitable for filtering, buffering and signal-conditioning blocks rather than only for slow precision DC measurement. Because it is a CMOS design, the device suits battery and energy-harvesting systems where leakage current matters, while the shutdown pin allows the rail to be collapsed entirely when the node is not being sampled. Typical applications include portable sensor signal conditioning, low-side current-sense amplification, audio and communication line-driver preambles, battery-powered monitor front ends, and general-purpose buffering inside test and measurement equipment. When designing with the TLV2620IP, remember that the shutdown pin is a logic input referenced to the supply rail, not ground, so drive it from a rail-compatible signal and make sure it is never left floating. Also respect the maximum total supply voltage of 5.5 V and provide adequate decoupling close to the supply pins. This page consolidates the key electrical characteristics, an at-a-glance comparison against pin-compatible drop-in alternatives, and practical design notes covering layout, decoupling and shutdown control, giving engineers the guidance needed to qualify the part before it reaches schematic review.

詢價 聯絡我們
TLV2621ID - 11MHz RRO Low-Power Op Amp | Texas Instruments
TLV2621ID

TLV2621ID - 11MHz RRO Low-Power Op Amp | Texas Instruments

Texas Instruments TLV2621ID is a single-channel, rail-to-rail-output operational amplifier with an 11 MHz gain-bandwidth product, 800 uA per-channel quiescent current, and operation from a 2.7 V to 5.5 V supply. The device is packaged in an 8-pin SOIC and is intended for low-voltage, low-power signal-conditioning systems. Its rail-to-rail output allows the amplifier to approach the supply rails while maintaining useful signal swing. An operational amplifier is an analog signal-conditioning semiconductor that uses differential feedback to amplify or buffer a voltage signal. The TLV2621 belongs to the operational-amplifier hierarchy, where rail-to-rail output means the output voltage can swing close to both supply rails. Within low-voltage power management and analog signal conditioning, this capability supports portable sensing, low-voltage instrumentation, and interface circuits operating from a 5.5 V maximum supply. The TLV2621 combines an 11 MHz gain-bandwidth product with low quiescent current of 800 uA per channel. Its 9.5 V/us slew rate provides useful response to changing input signals, while the 2.7 V to 5.5 V operating range accommodates low-energy electronic systems. The single-channel configuration conserves board area when only one amplifier is required, and the standard 8-SOIC package supports conventional surface-mount assembly. The TLV2621 is described by Texas Instruments as a low-power, wide-bandwidth, single-supply operational amplifier with shutdown capability in the product family. Rail-to-rail output behavior is particularly useful in systems whose signal range extends toward the positive supply rail. Designers should still account for input common-mode range, output swing, noise, stability, and load-drive limits when selecting feedback components and defining the usable signal range. Typical uses include low-voltage sensor interfaces, portable measurement equipment, industrial signal conditioning, battery-powered monitoring, and general-purpose analog amplification. The 11 MHz bandwidth makes the device relevant to higher-bandwidth feedback networks than low-frequency precision amplifiers, while its 800 uA per-channel supply current supports designs where amplifier power consumption is an important system constraint. Design around the exact 2.7 V to 5.5 V supply range, and verify the required input and output swing for the application. Place input and feedback components close to the device, maintain the decoupling structure recommended by the manufacturer, and use stable compensation for non-inverting gain and capacitive-load conditions. Confirm shutdown behavior and pin functions in the pin-description table before assigning board connections. This page combines the manufacturer product information, distributor identification, pin-package details, family-level construction options, and practical selection guidance. It also distinguishes verified drop-in candidates from options requiring separate electrical review, helping engineers identify whether TLV2621ID is appropriate for a new design or an existing 8-SOIC layout.

詢價 聯絡我們
TLV2630ID - 9MHz RRO Op Amp with Shutdown | Texas Instruments
TLV2630ID

TLV2630ID - 9MHz RRO Op Amp with Shutdown | Texas Instruments

Texas Instruments TLV2630ID is a single, low-power, rail-to-rail operational amplifier with shutdown, a 9 MHz gain-bandwidth product, and an 8-pin SOIC package. It operates from a 2.7 V minimum supply and is designed for general-purpose signal conditioning on low-voltage systems. The amplifier provides approximately 1 mA of channel supply current and a 10 V/us slew rate, balancing bandwidth and low power consumption for portable and embedded applications. An operational amplifier is a voltage-controlled differential amplifier whose gain, buffering, filtering, and level-shifting functions support analog signal chains. The TLV2630 belongs to the operational-amplifier hierarchy, which includes general-purpose amplifiers, rail-to-rail input/output amplifiers, and low-power analog signal-conditioning ICs. The TLV2630ID is particularly useful when a design requires low-noise logic-level rails, moderate AC performance, and a controlled shutdown state. The TLV2630ID supports rail-to-rail input and output operation. Rail-to-rail input capability allows the amplifier to sense signals near the positive or negative supply rails, which is important in systems whose analog signals span most of the available supply voltage. Rail-to-rail output operation increases the usable output range and can simplify level translation between low-voltage sensors, mixed-signal converters, and digital control systems. A 9 MHz gain-bandwidth product supports moderate closed-loop gains where higher bandwidth is useful for signal amplification and filtering. The approximately 10 V/us slew rate helps the amplifier follow rapidly changing input waveforms with limited large-signal distortion. Because the device is optimized for low power rather than maximum drive current, applications requiring substantial capacitive loading or high output-current capability should be evaluated carefully during prototyping. The shutdown function provides a way to reduce power consumption when the signal path is not active. This is valuable in battery-powered equipment, sensor nodes, and portable instruments that spend significant time between measurements. The shutdown behavior and timing should be checked against the manufacturer datasheet before using the control pin for a particular sequencing scheme. Typical uses include low-voltage sensor interfaces, portable medical and industrial monitoring equipment, audio input conditioning, ADC driver circuits, and general-purpose active filtering. The 8-SOIC package supports conventional surface-mount assembly while offering more pins than the smaller SOT-23 single-amplifier packages in the same family. This product page combines the Texas Instruments product information with practical guidance for power management, shutdown control, signal integrity, and replacement decisions. It also distinguishes verified TLV2630ID characteristics from family alternatives that require independent electrical and pin-function verification before use as a drop-in replacement.

詢價 聯絡我們
TLV2631ID - 9MHz RRO Op Amp | Texas Instruments
TLV2631ID

TLV2631ID - 9MHz RRO Op Amp | Texas Instruments

Texas Instruments TLV2631ID is a single-circuit, low-power, rail-to-rail-output operational amplifier with a 9 MHz gain-bandwidth product and a 5.5 V maximum supply voltage. The device is supplied in an 8-pin SOIC package and is intended for general-purpose signal-conditioning applications operating from a single positive supply. An operational amplifier is a voltage-feedback amplifier whose open-loop gain, differential inputs, and feedback network determine the behavior of the completed circuit. The TLV2631 belongs to the operational-amplifier hierarchy within analog and linear integrated circuits. Its rail-to-rail output stage permits the output voltage to approach the positive and negative supply limits more closely than a conventional output stage, making it useful when the usable signal range must extend toward the rails. The TLV2631ID combines a 9 MHz gain-bandwidth product with low channel supply current. Published device information identifies approximately 730 µA of supply current per channel. Rail-to-rail output operation and low power consumption support portable sensing, low-level signal conditioning, and general industrial instrumentation where a single amplifier must provide useful bandwidth without a high quiescent-current budget. At the circuit level, the TLV2631 is a conventional voltage-feedback operational amplifier, so the closed-loop response is established mainly by external resistors and capacitors rather than an internal switched-capacitor network. Its 9 MHz gain-bandwidth product permits useful closed-loop bandwidth above the audio range, although actual stability, slew behavior, noise, output-current capability, and input-offset performance depend on the complete operating conditions and the manufacturer datasheet. Typical uses include sensor-signal conditioning, buffer stages, low-level analog amplification, active filtering, and audio or instrumentation interfaces. The single-amplifier configuration is useful when board space is constrained and only one independent amplifier channel is required. The 8-SOIC package also supports conventional surface-mount assembly and hand-soldering during prototype work. When designing around the TLV2631ID, begin by checking the 5.5 V maximum supply limit, operating-temperature limits, input common-mode range, output swing, noise, offset voltage, and stability requirements in the manufacturer datasheet. Place input, feedback, and decoupling components close to the device, and verify the chosen gain and capacitive loading against the manufacturer’s stability guidance rather than assuming that every feedback value is stable. This product page combines manufacturer identification, exact orderable-package information, practical application guidance, and a conservative drop-in replacement assessment. It also distinguishes verified same-package candidates from generic functional equivalents, helping engineers evaluate PCB reuse without confusing broad amplifier similarity with true pin-to-pin compatibility.

詢價 聯絡我們
TLV2633ID - Dual 9 MHz RRIO Op Amp | Texas Instruments
TLV2633ID

TLV2633ID - Dual 9 MHz RRIO Op Amp | Texas Instruments

The Texas Instruments TLV2633ID is a dual operational amplifier with two independent amplifier circuits, rail-to-rail inputs and outputs, a 9 MHz gain-bandwidth product, approximately 1 mA supply current per channel, and shutdown capability in a 14-pin SOIC package. Designed for single-supply operation, it supports low-voltage signal conditioning where low power consumption and usable bandwidth are important. An operational amplifier is an analog signal-processing IC that uses differential feedback to amplify the difference between two input voltages. A rail-to-rail input and output stage can operate near the supply rails, making the TLV2633ID useful for sensor signals, battery-powered instrumentation, audio paths, and low-voltage control systems. In the device hierarchy, it is an operational amplifier, analog amplifier, and linear integrated circuit. The two amplifiers can handle independent signals or work together in differential, filtering, buffering, and gain configurations. Their 9 MHz gain-bandwidth product supports higher-frequency signal paths than low-bandwidth precision amplifiers while retaining the low approximately 1 mA-per-channel supply-current characteristic emphasized by the family description. Shutdown support can reduce activity when a subsystem is not needed, although individual shutdown behavior and control logic must be confirmed in the manufacturer datasheet before final design release. The wide-bandwidth, low-power architecture makes the TLV2633ID appropriate for general-purpose analog conditioning rather than only precision DC measurement. Its rail-to-rail characteristics simplify signal acquisition from sensors whose operating range approaches the available supply voltage. Two amplifiers in one package also reduce board area compared with two separate single-amplifier devices, while dual independent channels provide flexibility for signal conditioning or active filtering. Typical uses include portable sensor interfaces, buffered sensor outputs, low-voltage audio stages, analog monitoring channels, general-purpose active filters, and embedded control systems. The device can also support dual-amplifier topologies when common supply routing and shared decoupling are advantageous. Selection should account for the required common-mode range, output swing, noise, offset, stability, and load capability at the actual supply voltage. For layout, place the bypass capacitor close to the supply pins and maintain a common ground reference across both channels. Decoupling resistance and capacitance should be evaluated against the desired gain, source impedance, and signal bandwidth. Input and output nodes should be kept compact and separated where appropriate, especially when low-level signals are amplified. This page organizes the available technical characteristics, packaging details, application guidance, and verified source references for faster engineering review. It also distinguishes confirmed ratings from parameters that require direct confirmation in the manufacturer datasheet, helping designers establish whether the TLV2633ID fits a specific low-voltage analog circuit.

詢價 聯絡我們
TLV2635ID - 4-Channel 9 MHz RRO Op Amp | Texas Instruments
TLV2635ID

TLV2635ID - 4-Channel 9 MHz RRO Op Amp | Texas Instruments

The Texas Instruments TLV2635ID is a four-circuit, low-power, wide-bandwidth, single-supply operational amplifier with rail-to-rail output, a 9 MHz gain-bandwidth product, approximately 730 uA supply current per channel, and shutdown support. The device is packaged in a 16-pin SOIC. Its four independent amplifier sections support general-purpose signal conditioning where a quad amplifier can reduce the number of active packages required on a circuit board. An operational amplifier, commonly called an op amp, is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The TLV2635 family belongs to the linear amplifier hierarchy: operational amplifier, analog amplifier, amplifier IC, and semiconductor. Rail-to-rail output means the output voltage can approach the supply rails under suitable load and output conditions, making the amplifier useful in systems that require signal swing across most of the available supply-voltage range. The principal performance features are a 9 MHz gain-bandwidth product, approximately 730 uA of supply current per channel, and rail-to-rail output operation. Shutdown support can reduce power consumption when an enabled state is not required. The four-circuit configuration is particularly useful for filtering, buffering, level translation, instrumentation, and general analog signal-conditioning blocks that otherwise would require several separate amplifier packages. The TLV2635 combines single-supply operation with wide bandwidth, allowing it to operate from one positive rail where dual-supply op amps would otherwise be required. Because it is a low-power amplifier, its internal operating current is substantially lower than that of many general-purpose high-speed amplifiers. Engineers should still evaluate output swing, capacitive-load stability, input common-mode behavior, and gain-bandwidth interaction for the exact operating point before finalizing a circuit. Typical uses include low-frequency sensor conditioning, active filtering, audio and communication-signal interfaces, current-voltage conversion, and embedded control systems. The quad package is attractive when four channels must be routed to a nearby analog subsystem, provided the individual amplifier requirements are compatible with the family-wide bandwidth and power characteristics. A key design consideration is shutdown-state behavior. The manufacturer documents this family as operating-amplifier circuits with and without shutdown, but shutdown timing, logic levels, and state-specific output conditions must be confirmed in the TLV2635 datasheet before sequencing multiple analog channels. Decoupling capacitors should be placed close to the supply pins, and sensitive inputs should be kept away from high-impedance routing that can increase coupling and offset error. This product page organizes the key electrical characteristics, package information, practical use cases, design guidance, and a conservative comparison of identified alternatives. It also separates confirmed manufacturer and distributor information from engineering checks that still require schematic-level validation.

詢價 聯絡我們
TLV271CD - 3 MHz, 16 V Low-Power RRO Op Amp | Texas Instruments
TLV271CD

TLV271CD - 3 MHz, 16 V Low-Power RRO Op Amp | Texas Instruments

The Texas Instruments TLV271CD is a single, 16 V, 3 MHz CMOS operational amplifier with rail-to-rail output, 550 µA supply current per channel, and an 8-pin SOIC package. Its specified supply range is 2.7 V to 16 V, while its 3 MHz gain-bandwidth product and 2.4 V/µs slew rate support responsive signal conditioning. Designed as a low-power alternative to the TLC27x family, it suits systems that require output swing close to the supply rails without a higher-bandwidth amplifier. An operational amplifier is a voltage-controlled differential amplifier whose high open-loop gain makes closed-loop amplification practical when negative feedback defines the gain and bandwidth. The TLV271 belongs to the operational-amplifier, analog-amplifier, and semiconductor hierarchy. Its rail-to-rail output stage lets the output approach either supply rail under suitable load conditions, improving usable swing in low-voltage systems. The CMOS implementation also supports low power consumption, although total supply current depends on supply voltage, output activity, and load. The TLV27x family combines a 3 MHz bandwidth with 550 µA of supply current per channel and a 2.4 V/µs slew rate. According to the Texas Instruments manufacturer datasheet, the devices operate from 2.7 V to 16 V over an extended industrial temperature range of -40 °C to +125 °C. The verified search data identifies the TLV271CD as the commercial-grade 8-SOIC ordering variant. Its low quiescent current is valuable in battery-powered instrumentation, while its 3 MHz bandwidth is more useful than a micropower unity-gain-stable amplifier when moderate closed-loop bandwidth is required. The amplifier's architecture is suitable for voltage buffers, current-sensing interfaces, sensor amplification, and general-purpose analog filtering. Rail-to-rail output operation is especially relevant when the signal must use much of the available supply range. Designers should still check input common-mode range, output load, capacitive-load stability, and noise specifications in the manufacturer datasheet rather than assuming that rail-to-rail output also means rail-to-rail input. Stable feedback ratios and conservative capacitive loading help prevent oscillation. Typical uses include portable measurement systems, industrial sensor interfaces, low-voltage audio or communication blocks, active filters, and embedded control. The 3 MHz bandwidth allows higher closed-loop bandwidth than very-low-frequency precision amplifiers, while the 550 µA-per-channel current keeps demand modest. At low supply voltages, usable swing and input range become important design limits; at high frequencies, board parasitics and probe loading can materially alter observed performance. For implementation, bypass each supply pin with local decoupling and route feedback traces away from input and output nodes. Avoid placing large capacitive loads directly at the output unless the datasheet stability limits are checked. The main engineering trade-off is the combination of low power, moderate 3 MHz bandwidth, and single-supply rail-to-rail output: TLV271CD is not automatically interchangeable with op amps having different input architecture, noise, or compensation. This page consolidates the verified manufacturer specifications, distributor availability links, practical design notes, and explicitly qualified alternatives for engineers evaluating the TLV271CD in analog signal-chain designs.

詢價 聯絡我們
TLV271ID - 3MHz Low-Power RRO Op Amp | Texas Instruments
TLV271ID

TLV271ID - 3MHz Low-Power RRO Op Amp | Texas Instruments

Texas Instruments TLV271ID is a single 16 V, 3 MHz CMOS operational amplifier with rail-to-rail output, 550 uA/channel supply current, and a 2.4 V/us slew rate, housed in an 8-pin SOIC package. Its operating supply range is 2.7 V to 16 V, and its extended industrial temperature range is -40 C to +125 C. An operational amplifier is an analog signal-conditioning semiconductor that uses high open-loop gain to amplify voltage differences in feedback-based circuits. The TLV271 belongs to the operational-amplifier, analog-amplifier, and signal-conditioning hierarchy. Its rail-to-rail output enables the output stage to approach the supply rails more closely than a conventional output stage, while CMOS construction supports low power consumption and operation from low single-supply voltages. The TLV271 combines 3 MHz gain-bandwidth product with 2.4 V/us slew rate and 550 uA/channel supply current. Its input noise voltage is 550 nV/Hz, and the verified product data identifies a 39 nV/Hz input-bias-current figure. The device is intended for low-power, wide-bandwidth signal paths operating across a 2.7 V to 16 V supply range. The TLV27x family provides rail-to-rail output swing and a minimum operating supply voltage of 2.7 V. This architecture is useful in portable instrumentation, sensor interfaces, buffer stages, and general-purpose analog signal conditioning where a low-noise, low-power amplifier is preferred. The TLV271ID uses the D suffix package configuration identified in the verified distributor data as an 8-pin SOIC. Typical applications include portable measurement, low-side current sensing, sensor buffers, audio and communication interfaces, and industrial control modules. In a current-sense amplifier, the op amp amplifies the small voltage generated across a shunt resistor; its 3 MHz bandwidth and rail-to-rail output support useful signal range. In a sensor buffer, low supply current helps preserve limited power budgets. When designing around the TLV271ID, verify input common-mode behavior, output swing, load requirements, and stability for the selected feedback network. Decoupling capacitors should be placed close to the supply pins, and the PCB should minimize loop area to reduce supply-noise coupling. The TLV271 family is identified by Texas Instruments as an active product family, with final orderable-grade and lifecycle status checked against current manufacturer data. This page combines verified manufacturer and distributor information with a focused selection guide, application context, design notes, and qualified replacement discussion. It is intended to help engineers identify whether the TLV271ID fits a 2.7 V-to-16 V, low-power, rail-to-rail-output analog design.

詢價 聯絡我們
TLV271IP - 16V, 3MHz Rail-to-Rail Op Amp | Texas Instruments
TLV271IP

TLV271IP - 16V, 3MHz Rail-to-Rail Op Amp | Texas Instruments

The Texas Instruments TLV271IP is a single operational amplifier designed for low-power signal-conditioning systems, with a 16 V maximum supply voltage, 3 MHz gain-bandwidth product, and 550 µA per-channel supply current. Its rail-to-rail output capability allows the output to approach both supply rails, making it suitable for instrumentation, buffering, and low-voltage analog systems. The device is supplied in an 8-pin PDIP package. An operational amplifier is a voltage-controlled voltage-source device used to amplify the difference between two input voltages. In a practical signal chain, it can provide gain, impedance buffering, filtering, level shifting, or active feedback control. The TLV271 family is positioned as a low-power, general-purpose amplifier family for applications that require more bandwidth than very-low-power micropower parts while keeping supply current modest. The TLV271IP provides one amplifier per package. The verified manufacturer and distributor information identifies a 3 MHz bandwidth, 2.4 V/µs typical slew rate, 2.4 V minimum supply voltage, 16 V maximum supply voltage, 550 µA typical supply current, and input noise voltage of 39 nV/√Hz. The amplifier has rail-to-rail output operation, while the supplied data identifies a 39 nV/√Hz input noise voltage and an input bias current specification reaching 1 pA. These characteristics make it appropriate for sensor interfaces, analog measurement chains, buffering, and low-power embedded systems. Typical circuit use places the TLV271IP in non-inverting or inverting amplifier configurations, voltage followers, transimpedance front ends, and active filters. Because the output is rail-to-rail, the device can maximize usable signal range in low-voltage systems, although the exact output swing depends on load current and supply voltage. Its 3 MHz bandwidth enables higher-frequency signal paths than a slow precision amplifier, while the 550 µA supply current helps control power use in battery-powered or space-constrained equipment. The principal design consideration is supply and signal-headroom planning. The input common-mode range, output swing, load capability, noise performance, and stability requirements should be checked against the manufacturer datasheet for the selected supply and temperature conditions. Decoupling capacitors should be placed close to the power pins, and unused input pins must be handled according to the datasheet recommendations. The provided web data identifies the device as a CMOS amplifier in an 8-PDIP package, but detailed electrical limits and complete pin functions are not included in the supplied records. This product data combines the verified Texas Instruments and distributor listings, identifies the TLV271IP as a 16 V, 3 MHz, rail-to-rail-output single op amp, and separates documented specifications from parameters that require confirmation in the full manufacturer datasheet. It also records commercially relevant package and application information for engineers comparing low-power operational amplifiers. The TLV271IP is positioned for instrumentation, buffer, and general-purpose analog designs where a single amplifier, low-power operation, and rail-to-rail output are useful. It can serve as a building block in sensor signal conditioning, portable measurement equipment, industrial control interfaces, and embedded analog signal paths.

詢價 聯絡我們
TLV272CD - Dual 3MHz 16V Rail-to-Rail Op Amp | Texas Instruments
TLV272CD

TLV272CD - Dual 3MHz 16V Rail-to-Rail Op Amp | Texas Instruments

The Texas Instruments TLV272CD is a dual, general-purpose operational amplifier with a 16 V maximum supply, 3 MHz gain-bandwidth product, 2.4 V/us slew rate, and rail-to-rail output in an 8-SOIC package. Each channel is designed for low-power signal conditioning while maintaining useful bandwidth for general-purpose analog systems. An operational amplifier is a high-gain analog building block used to amplify, buffer, compare, or integrate signals. The TLV272 belongs to the voltage-feedback operational-amplifier hierarchy and combines a wide supply range, low channel current, and rail-to-rail output capability. Rail-to-rail output allows the output to approach the positive or negative supply limit more closely than a conventional output stage, improving dynamic range in low-voltage systems. Verified device characteristics include 550 uA per channel, 3 MHz bandwidth, 2.4 V/us slew rate, 2.7 V to 16 V operating supply range, 39 nV/Hz input-noise density, and input bias current specified as low as 1 pA. The family is positioned for portable instrumentation, sensor interfaces, audio paths, and general signal conditioning where dual-channel operation reduces package count. The wide supply range supports both conventional 5 V analog systems and higher-voltage rails, while the 3 MHz bandwidth supports signals beyond audio-band precision-only applications. The 2.4 V/us slew rate helps preserve large-signal response, although the exact output amplitude, load, and frequency must be checked against the manufacturer datasheet before final sizing. Typical uses include low-power sensor interfaces, buffered analog measurements, audio voltage buffers, active filtering, and general dual-channel conditioning. The SOIC-8 package is suitable for conventional surface-mount PCB assembly, but pin numbering and electrical limits must be verified against the exact TLV272 datasheet. A key design consideration is that low power and moderate bandwidth do not eliminate the need for stable reference and feedback networks. Place bypass capacitors near the supply pins, use short feedback paths, and verify common-mode, output-swing, noise, and stability requirements against the application. This page consolidates verified manufacturer and distributor information with design-oriented guidance; unsupported details remain explicitly marked for review.

詢價 聯絡我們
TLV272ID - Dual 16V 3MHz R-R Op Amp | Texas Instruments
TLV272ID

TLV272ID - Dual 16V 3MHz R-R Op Amp | Texas Instruments

The Texas Instruments TLV272ID is a dual, 16 V, 3 MHz rail-to-rail output operational amplifier packaged in an 8-pin SOIC. It uses approximately 550 uA per channel and is specified for operation from 2.7 V to 16 V over a -40 C to +125 C temperature range. These headline values position it as a compact, low-power amplifier for general-purpose analog signal conditioning. An operational amplifier is an active analog component that amplifies the voltage difference between its differential inputs while using negative feedback to set closed-loop gain, filtering, or integration behavior. Within the hierarchy of integrated circuits, the TLV272 belongs to the operational-amplifier class, then to voltage-feedback amplifiers, analog ICs, and ultimately semiconductor signal-conditioning devices. Rail-to-rail output allows the output voltage to approach the supply limits at its rated operating conditions. Key verified characteristics include a 3 MHz gain-bandwidth product, dual-amplifier configuration, 550 uA supply current per channel, 16 V maximum supply rating, and rail-to-rail output operation. The 3 MHz bandwidth supports higher-frequency signal paths than very-low-bandwidth micropower amplifiers, while the 550 uA per-channel current supports battery-conscious designs. The -40 C to +125 C grade is suitable for industrial temperature requirements when the complete circuit is qualified for those conditions. The TLV272ID combines two independent amplifiers in one SOIC-8, reducing board area compared with two separate single-channel packages. Its operating characteristics are relevant for sensor interfaces, audio paths, filtering, and general voltage amplification. However, the provided web data does not specify input offset voltage, input bias current, noise density, output-current capability, or input common-mode range, so these values must be confirmed in the manufacturer datasheet before precision design. Typical uses include low-frequency audio amplification, buffered sensor outputs, active filters, and portable measurement circuits. When operating from a 2.7 V supply, engineers must confirm that output swing, input range, and load requirements remain acceptable at the selected signal amplitudes. The 16 V maximum rating does not by itself establish safe operation at every intermediate rail or temperature combination. The main PCB consideration is decoupling. Place input and output-conditioning components close to their associated pins, route feedback loops compactly, and provide stable supply bypassing. Stable operation also depends on the required common-mode and output ranges, load impedance, feedback topology, and output-current demand. This page combines verified manufacturer and distributor information with explicit data gaps, practical application guidance, and conservative sourcing. It is intended to speed engineering evaluation while avoiding unsupported claims about parameters not present in the retrieved records.

詢價 聯絡我們
TLV272IP - Dual 16V 3MHz R-R Op Amp | Texas Instruments
TLV272IP

TLV272IP - Dual 16V 3MHz R-R Op Amp | Texas Instruments

The Texas Instruments TLV272IP is a dual, 16 V, 3 MHz operational amplifier with rail-to-rail output swing, supplied in an 8-pin PDIP package. It provides two amplifier channels, a 2.4 V/us slew rate, 550 uA/channel supply current and a 2.7 V to 16 V total supply range. The device is intended for low-power, wide-bandwidth signal conditioning where rail-to-rail output capability improves usable output range. An operational amplifier is an analog integrated circuit that uses high-gain differential feedback to amplify voltage signals. The TLV272IP belongs to the operational-amplifier hierarchy and is appropriate for sensor interfaces, buffer stages, filters, audio paths and general-purpose analog signal chains. Its rail-to-rail output is useful when the amplifier must approach the positive or negative supply rail while retaining a defined output voltage. The main performance features are 3 MHz gain-bandwidth product, 2.4 V/us slew rate, 550 uA/channel supply current and 39 nV/Hz input noise voltage. The verified family information also specifies operation from 2.7 V to 16 V, with commercial and extended-temperature options in the broader TLV27x family. Because the TLV272IP is a dual device, one package can support two independent analog channels. The PDIP package is through-hole and therefore useful for prototypes, educational designs, repair assemblies and applications where leaded parts are preferred over surface-mount packages. Its 8-pin arrangement matches the dual-op-amp pinout convention, but the exact pin names and electrical limits must be confirmed against the manufacturer datasheet before final PCB release. The verified sources identify the TLV272IP as a dual rail-to-rail-output operational amplifier in an 8-PDIP package. Typical uses include low-voltage sensor buffering, portable instrumentation, audio preamplification, active filtering and industrial control signal conditioning. The 3 MHz bandwidth provides more signal bandwidth than a strictly low-frequency precision amplifier, while the 550 uA/channel current supports battery-conscious designs. The tradeoff is that the PDIP footprint is larger and less compact than an equivalent surface-mount package. For PCB design, place input and output components close to the relevant pins and maintain a common ground reference. Decoupling capacitors should be placed at the power pins to control supply impedance and high-frequency noise. Confirm stability, input common-mode range, output-load limits and supply current in the final circuit rather than relying only on the headline bandwidth and slew-rate figures. This product record combines verified manufacturer and distributor information with explicitly marked data gaps, practical application guidance and sourcing-oriented search terms. It is intended to help engineers identify the correct package, assess whether TLV272IP fits a signal-chain requirement and locate the manufacturer datasheet before committing to a design.

詢價 聯絡我們
TLV274CD - 3 MHz Quad 16 V Operational Amplifier | TI
TLV274CD

TLV274CD - 3 MHz Quad 16 V Operational Amplifier | TI

The Texas Instruments TLV274CD is a quad, 16 V, 3 MHz operational amplifier with rail-to-rail output capability, housed in a 14-pin SOIC package. The verified product data identifies a 550 µA-per-channel supply current, 2.4 V/µs slew rate, 2.7 V to 16 V supply operation, and a commercial temperature range identified by the CD ordering code. It is designed for general-purpose analog signal conditioning where low power, moderate bandwidth, and rail-to-rail output are useful. An operational amplifier is an analog integrated circuit that uses high open-loop gain to amplify voltage differences between its input terminals. The TLV274 belongs to the operational-amplifier, analog-amplifier, and signal-conditioning IC hierarchy. Its four amplifiers in one package make it suitable for multi-channel systems, while rail-to-rail output helps the output approach the supply rails and improves dynamic range in low-voltage designs. The verified data lists 3 MHz bandwidth, 2.4 V/µs slew rate, 16 V maximum supply voltage, 550 µA per channel, and 550 µA/channel input-noise-related information. The wide supply range supports portable, industrial, test, and measurement systems. The low power per channel is useful when four amplifiers must operate continuously, while the 3 MHz bandwidth is more appropriate for general-purpose signal paths than precision low-frequency instrumentation alone. The TLV274CD uses a 14-pin SOIC package and is offered through distributors including DigiKey, Mouser, LCSC, and Octopart. The verified DigiKey result identifies it as a standard general-purpose amplifier with four circuits and rail-to-rail output. Because the available data does not provide complete pin names, exact electrical limits, or validated drop-in alternatives, those details are marked as needed rather than guessed. Typical uses include low-frequency sensor interfaces, buffered analog measurement chains, current or voltage signal conditioning, audio preamplifier stages, and general embedded control systems. Keep the input common-mode range, output swing, load, supply voltage, and stability requirements within the manufacturer datasheet limits, and account for input bias current, noise, and capacitive loading. For PCB design, place the bypass capacitor close to the supply pins and keep analog input and output routing short. Avoid excessive capacitive loading at the output and verify stability with the selected feedback network. This page combines verified manufacturer and distributor information with practical design guidance; confirm final electrical and mechanical details against the official TI datasheet before release.

詢價 聯絡我們
TLV274ID - Quad 16V 3MHz RRO Op Amp | Texas Instruments
TLV274ID

TLV274ID - Quad 16V 3MHz RRO Op Amp | Texas Instruments

The Texas Instruments TLV274ID is a quad, general-purpose operational amplifier with 16 V supply capability, 3 MHz gain-bandwidth product, and rail-to-rail output operation in a 14-SOIC package. Each of its four channels draws 550 uA nominal supply current and supports a 2.4 V to 16 V supply range, making the device suitable for compact, low-power analog signal chains. An operational amplifier is an active analog component that uses high open-loop gain to amplify the difference between two input voltages. The TLV274 belongs to the operational-amplifier hierarchy and combines rail-to-rail output swing with a relatively high 3 MHz bandwidth. That balance is useful for signal conditioning, filtering, buffering, and general instrumentation where low supply current and usable high-frequency response matter. Key characteristics include four independent amplifiers in one package, rail-to-rail output, 3 MHz bandwidth, 2.4 V/us slew rate, and 550 uA/channel supply current. The reported input-voltage noise density is 39 nV/sqrt(Hz), while input bias current reaches as low as 1 pA in the characterized operating range. These values support low-level signal work, although input offset voltage, input common-mode range, and output-current limits were not supplied in the verified data. The TLV274ID is based on a rail-to-rail-output amplifier architecture rather than a rail-to-rail-input design. Designers must therefore verify that input signals remain inside the allowed common-mode region. Its 3 MHz bandwidth enables moderate-frequency feedback networks and sensing loops, but stability should be checked against output loading, capacitance, noise gain, and filter topology. Typical uses include low-power sensor conditioning, audio and communication interfaces, current measurement, data acquisition, filtering, and embedded analog control. Placing four amplifiers in one SOIC can reduce package count, but adjacent channels may share supply and thermal conditions. Decoupling and grounding therefore remain important when driving successive signals. Begin each supply rail with suitable local bypass capacitance and route high-current return paths away from sensitive analog inputs. Because the exact compensation recommendations and electrical limits are unavailable in the supplied source set, use the manufacturer datasheet for final gain, load, stability, and layout validation. This page combines verified product facts, application guidance, procurement context, and a conservative comparison of documented family variants. Its added value is an engineering-focused explanation of where the TLV274ID fits without treating unavailable electrical limits as assumptions.

詢價 聯絡我們
TLV274IN - 3MHz Quad Rail-to-Rail Op Amp | Texas Instruments
TLV274IN

TLV274IN - 3MHz Quad Rail-to-Rail Op Amp | Texas Instruments

The Texas Instruments TLV274IN is a four-circuit, general-purpose operational amplifier with a 3 MHz gain-bandwidth product, 2.4 V to 16 V supply-voltage range, and rail-to-rail output operation. It is packaged in a 14-pin PDIP and is intended for low-power signal conditioning across industrial, instrumentation, and embedded systems. The verified source data identifies 550 µA of supply current per channel, 2.4 V/µs slew rate, 39 nV/Hz input-noise voltage density, and specified operation from 0°C to 70°C. An operational amplifier is an analog building block that uses high open-loop gain to amplify the difference between two input voltages. Within the signal-chain hierarchy, the TLV274IN belongs to the operational-amplifier, analog-amplifier, and semiconductor categories. Rail-to-rail output capability allows the output to approach the positive or negative supply rail under suitable load conditions, while the wide supply range supports single-supply and dual-supply systems. Key features include four amplifiers in one package, a 3 MHz bandwidth, 2.4 V/µs slew rate, 550 µA per-channel supply current, 39 nV/Hz input-voltage-noise density, and 1 pA input-bias current over the specified temperature range. The low-power bias current is useful when preserving sensor signals and reducing loading, while the 3 MHz bandwidth supports higher-frequency signal paths and active filtering. The TLV274IN is based on a voltage-feedback amplifier architecture, as identified in the verified comparison data. In a typical application, one channel is used for amplification, another for buffering, and the remaining channels for filtering or instrumentation. Its rail-to-rail output supports low-voltage systems where the signal must use much of the available supply range. Typical applications include sensor-interface circuits, data-acquisition signal chains, low-frequency filters, buffered analog controls, portable instrumentation, and embedded measurement systems. The 16 V maximum supply makes it suitable for systems operating below industrial transient voltages, provided the design does not exceed the device rating. When laying out a TLV274IN board, keep the unused amplifier inputs biased to a valid common-mode level and place input and feedback components close to the relevant pins. Check the required output swing, load, stability, and supply-bypass requirements against the manufacturer datasheet before committing the design.

詢價 聯絡我們
TLV2760CD - 3.6V, 500kHz Micropower RRIO Op Amp with Shutdown | Texas Instruments
TLV2760CD

TLV2760CD - 3.6V, 500kHz Micropower RRIO Op Amp with Shutdown | Texas Instruments

The Texas Instruments TLV2760CD is a single, micropower, rail-to-rail input/output operational amplifier with shutdown, specified for a 1.8 V to 3.6 V supply range, 500 kHz gain-bandwidth product, 20 µA typical quiescent current and an 8-pin SOIC package. An operational amplifier is a voltage-gain building block that compares two input terminals and drives its output to control loops, buffer levels, or amplify small sensor signals. The TLV2760 belongs to the hierarchy low-noise amplifier -> operational amplifier -> analog signal conditioning IC -> semiconductor, and its rail-to-rail (RRIO) input and output stages let it operate directly across the full supply rails without headroom constraints. Key features of the TLV2760 include 500 kHz bandwidth from only 20 µA of supply current, rail-to-rail inputs and outputs, a shutdown pin for reducing supply current when the amplifier is idle, 3.5 mV typical offset voltage, and approximately 3 pA input bias current. The wide common-mode input range reaches both supply rails, which simplifies sensor front-ends powered directly from cells. Architecturally, the device is a CMOS single-supply amplifier that is fully specified down to a 1.8 V rail and characterized at 1.8 V and 2.4 V supply conditions. The maximum recommended supply voltage of 3.6 V permits operation from 1.8 V supplies down to 0.9 V (two AA or AAA cells), giving designers flexibility for energy-harvesting and portable systems. Typical applications include portable sensor conditioning, battery-powered instrumentation, low-power filter stages, transimpedance pre-amplifiers for photodiodes and pH electrodes, and general embedded signal conditioning where board area and supply current are tightly constrained. When designing with the TLV2760, keep the shutdown pin compatible with the host logic levels and observe the maximum recommended supply voltage of 3.6 V. Because the amplifier is intended for low-voltage rails, verify that any external feedback network and the surrounding ADC front end operate at compatible common-mode and output swing levels. This page consolidates distributor availability, drop-in replacement candidates, comparison data and practical layout guidance in one place, so engineers can shortlist the part faster than by reading a datasheet alone.

詢價 聯絡我們
TLV2770ID - 5.1 MHz High-Slew-Rate Op Amp | TI
TLV2770ID

TLV2770ID - 5.1 MHz High-Slew-Rate Op Amp | TI

The Texas Instruments TLV2770ID is a single CMOS operational amplifier with a 5.5 V maximum supply, 5.1 MHz gain-bandwidth product, and 10.5 V/μs high slew rate, housed in an 8-pin SOIC package. The device provides rail-to-rail output swing, high output drive, excellent DC precision, and a shutdown function for controlled low-power operation. Its supply current is approximately 1 mA per channel, making it suitable for portable, industrial, and instrumentation signal-conditioning systems. A CMOS operational amplifier is an analog integrated circuit that amplifies voltage differences while operating from a positive supply, a negative supply, or a single supply configuration. Operational amplifiers form the foundation of analog signal chains, where they perform functions such as buffering, amplification, filtering, level shifting, current-to-voltage conversion, and active feedback control. The TLV2770 combines a wide bandwidth with high slew rate to support signals that require both fast response and accurate output voltage control. The headline specifications provide a clear balance between speed and efficiency. A 5.1 MHz gain-bandwidth product supports moderate-frequency signal amplification, while the 10.5 V/μs slew rate allows the output to change rapidly without the severe distortion associated with slower amplifiers. Rail-to-rail output operation improves usable output range in low-voltage systems, and the approximately 1 mA supply current helps limit power consumption when the shutdown function is not being used. The TLV2770ID combines high-speed AC performance with the DC precision expected of the TLV277x CMOS family. Its single-amplifier configuration avoids the additional channels and package area associated with a dual or quad device. An integrated shutdown path supports designs that periodically disable the amplifier, reducing activity during inactive intervals. Designers should still confirm shutdown-control polarity, timing, output behavior, and input-state requirements against the manufacturer datasheet before finalizing a power-sequencing scheme. Typical uses include sensor-signal conditioning, low-level analog amplification, active filtering, data-acquisition front ends, industrial control loops, and portable instrumentation. The 8-pin SOIC format supports conventional PCB assembly and rework, while the 2.7 V to 5.5 V operating range accommodates both 3.3 V and 5 V systems. In battery-powered equipment, low supply current and shutdown capability can help reduce average energy use when the amplifier operates intermittently. The main design consideration is the tradeoff between speed, output swing, noise, and power. The 10.5 V/μs slew rate makes the amplifier appropriate for fast signal transitions, but it may require additional attention to output-load drive, feedback stability, input common-mode range, and decoupling when driving long PCB traces or capacitive loads. Place the bypass capacitor close to the supply pins and use the pin-description table in the manufacturer datasheet when assigning PCB tracks. This product page consolidates the manufacturer specifications, verified package information, sourcing guidance, comparison limits, and practical application considerations into a focused engineering reference. It also distinguishes true pin-compatible alternatives from related amplifiers that require different shutdown connections, preventing a superficially similar device from being treated as a drop-in replacement.

詢價 聯絡我們
TLV2772CD - Dual 5.1MHz RRIO Amplifier | Texas Instruments
TLV2772CD

TLV2772CD - Dual 5.1MHz RRIO Amplifier | Texas Instruments

Texas Instruments TLV2772CD is a dual CMOS operational amplifier with two independent channels, 5.5 V maximum supply voltage, 5.1 MHz gain-bandwidth product, 10.5 V/µs slew rate, and rail-to-rail output operation in an 8-pin SOIC package. Each channel combines high AC performance with low supply current of 1 mA, making the device suitable for portable instrumentation, signal conditioning, and low-voltage analog systems. An operational amplifier is a voltage-gain building block used to amplify small sensor and control signals, buffer imperfect sources, implement active filters, and drive analog-to-digital converter inputs. The TLV2772 belongs to the CMOS operational amplifier hierarchy, combining low power consumption with the bandwidth and slew rate needed for higher-speed signal chains. Its rail-to-rail output allows the output voltage to approach the supply rails more closely than a conventional fixed-output amplifier. Key features include a 5.1 MHz unity-gain bandwidth, 10.5 V/µs slew rate, and 1 mA supply current per channel. The dual configuration provides two amplifiers in one package, reducing board area for paired signal paths. Shutdown support can reduce supply demand when the amplifiers are not needed, although operating behavior during shutdown requires verification against the manufacturer datasheet. The 8-pin SOIC package is also compatible with conventional surface-mount assembly methods. The TLV2772 family combines high bandwidth, high output drive, rail-to-rail output swing, and good DC precision. Its 10.5 V/µs slew rate gives it substantially more dynamic range than slower general-purpose CMOS amplifiers, making it useful for pulse, waveform, and feedback-control applications. The 5.1 MHz bandwidth supports closed-loop operation at frequencies suitable for audio, communications, industrial measurement, and embedded analog interfaces. Typical uses include portable sensor conditioning, low-voltage data-acquisition channels, active audio filters, motor and actuator feedback networks, and general-purpose buffering. The device is especially relevant where a designer needs faster edge rates than conventional low-power amplifiers while retaining roughly 1 mA of supply current per active channel. Rail-to-rail output operation also expands usable output range in systems operated close to the positive supply limit. Designers should verify input common-mode limits, output-current capability, noise, offset voltage, and shutdown timing before finalizing a circuit. Keep feedback-loop compensation appropriate for the selected closed-loop gain, provide stable reference and feedback paths, and use short, low-impedance routing where high-frequency behavior matters. Decoupling capacitors should be placed close to the supply pins to minimize supply noise and local impedance. This product page combines manufacturer specifications, practical application guidance, lifecycle information, and pin-level design references. It also identifies the technical distinctions that matter when evaluating this amplifier against same-package alternatives, including bandwidth, supply current, shutdown behavior, precision, and qualification requirements.

詢價 聯絡我們
TLV2772ID - Dual 5.1MHz High-Slew-Rate Op Amp | Texas Instruments
TLV2772ID

TLV2772ID - Dual 5.1MHz High-Slew-Rate Op Amp | Texas Instruments

Texas Instruments TLV2772ID is a dual CMOS operational amplifier with rail-to-rail output, a 5.5 V maximum supply, 5.1 MHz gain-bandwidth product, and a 10.5 V/us slew rate. The device is offered in an 8-pin SOIC package and includes shutdown capability within the TLV277x family. An operational amplifier is a voltage-gain amplifier that uses external feedback to control gain and signal behavior. Operational amplifiers form the basic building blocks of analog signal chains, where they perform functions such as buffering, amplification, level shifting, filtering, active gain control, and impedance conversion. In a precision instrumentation system, they help condition small sensor signals before conversion or further processing. The TLV2772ID combines a 5.1 MHz gain-bandwidth product with a relatively high 10.5 V/us slew rate. These characteristics allow the amplifier to respond to rapidly changing input signals while operating from a supply of up to 5.5 V. Rail-to-rail output operation supports signal swings near the upper and lower limits of the available output range, although the usable swing still depends on output current, load, and supply voltage. Each TLV2772ID package contains two amplifier channels. The family is designed for low-voltage analog systems where rail-to-rail output, bandwidth, and slew-rate performance are important. A CMOS implementation and a shutdown function make the device applicable to portable instrumentation, battery-powered measurement systems, and designs that require controlled amplifier turn-off. The manufacturer classifies the TLV2772 as a high-slew-rate, rail-to-rail-output operational amplifier. Typical applications include low-level sensor signal conditioning, portable data-acquisition front ends, audio and communication interface circuits, buffer stages, and general-purpose analog amplification. In these systems, the 5.1 MHz bandwidth and 10.5 V/us slew rate help preserve signal fidelity when operating at higher signal frequencies or driving moderate capacitive loads. When designing around the TLV2772ID, verify the input common-mode range, output swing, noise, offset, and capacitive-load stability in the Texas Instruments datasheet Rev. G for the exact channel and supply conditions. Place input and feedback components close to the amplifier pins, and use short, low-impedance routing to avoid parasitic capacitance and feedback-loop instability. This page combines the manufacturer’s identified electrical characteristics with application guidance, drop-in-family alternatives, package information, and engineering-focused selection considerations. It is designed to help designers determine whether the TLV2772ID’s dual-channel architecture, supply rating, bandwidth, slew rate, and SOIC footprint fit a low-voltage analog design.

詢價 聯絡我們
TLV2774CD - Quad 5.1MHz Rail-to-Rail Op Amp | Texas Instruments
TLV2774CD

TLV2774CD - Quad 5.1MHz Rail-to-Rail Op Amp | Texas Instruments

Texas Instruments TLV2774CD is a quad CMOS operational amplifier rated for a 5.5 V maximum supply voltage, 5.1 MHz gain-bandwidth product, and 10.5 V/μs slew rate. The device is packaged in a 14-pin SOIC (D) and combines four amplifiers with rail-to-rail output capability. These characteristics place it in the operational-amplifier IC hierarchy, where it bridges precision signal conditioning and higher-speed analog signal processing. An operational amplifier is a voltage-gain building block that compares an input signal with a feedback network. The TLV2774CD provides four channels in one package, allowing designers to implement filters, amplifiers, level conversions, sensing paths, and signal-conditioning stages while reducing board area. Its rail-to-rail output swing supports operation near the supply rails, while the 10.5 V/μs slew rate improves responsiveness for moderate-frequency waveforms and load-step recovery. The 5.1 MHz gain-bandwidth product and 10.5 V/μs slew rate are the primary dynamic performance indicators. A wider bandwidth supports higher closed-loop operating frequencies, while slew rate governs how quickly the output can change for larger voltage transitions. The four-channel architecture is particularly useful when several nodes require similar amplification or filtering, but common signal-ground and power-distribution quality remain essential for predictable behavior. Typical uses include low-frequency sensor conditioning, audio signal paths, instrumentation, current-feedback or voltage-feedback filtering, and general-purpose analog amplification. The 5.5 V maximum supply rating makes the device appropriate for systems operating below that limit. Circuit designers should still verify input and output common-mode limits, output-current capability, capacitive-load behavior, and shutdown-control logic against the manufacturer datasheet before finalizing a design. The principal design consideration is rail-to-rail behavior at the output. Designers should account for the output swing remaining inside the usable supply range, ensure feedback components preserve intended noise and stability behavior, and place bypassing capacitance close to the power pins. Decoupling helps isolate the amplifier from supply ripple and high-frequency coupling, while keeping sensitive input nodes away from switching-current paths reduces signal-integrity risk. This page organizes the TLV2774CD’s key specifications, pin-compatible family options, application guidance, and design trade-offs into one engineering-focused reference. It also distinguishes the standard CD ordering code from other TLV2774 qualification and package codes so engineers can select a replacement without changing the 14-pin SOIC board footprint.

詢價 聯絡我們
TLV2774IN - 5.1 MHz Quad Rail-to-Rail Op Amp | Texas Instruments
TLV2774IN

TLV2774IN - 5.1 MHz Quad Rail-to-Rail Op Amp | Texas Instruments

Texas Instruments TLV2774IN is a quad CMOS operational amplifier with a 5.1 MHz gain-bandwidth product, 10.5 V/µs slew rate, and rail-to-rail output operation. It operates from 2.7 V to 5.5 V and is packaged in a 14-pin PDIP, identified by the IN ordering suffix. The four amplifiers are designed for low-voltage analog systems requiring fast signal transitions and rail-to-rail output drive. An operational amplifier is a voltage-gain amplifier that compares its input voltage with a feedback-determined reference. When used in a closed-loop configuration, negative feedback causes the output to approach the ideal target voltage. The quad format integrates four amplifiers in one package, reducing board area in designs that require multiple gain, buffering, filtering, or signal-conditioning channels. The TLV2774IN combines a 5.1 MHz gain-bandwidth product with 10.5 V/µs slew rate. These characteristics make it appropriate for higher-bandwidth signal paths than general-purpose low-power amplifiers. Its rail-to-rail output allows the output voltage to approach the positive and negative supply limits, improving usable signal range in low-voltage systems. Each channel consumes 1 mA of supply current according to the family documentation. The CMOS implementation supports low-voltage operation from 2.7 V to 5.5 V while providing high slew rate and output drive. Good DC precision is particularly useful in instrumentation, sensor-conditioning, and feedback-control circuits where offset and bias-related errors can affect system accuracy. The family also includes shutdown functionality, which can reduce supply demand when an analog subsystem is not needed. Typical applications include low-voltage sensor interfaces, current-to-voltage conversion, active filtering, audio and communication signal conditioning, industrial control loops, and portable instrumentation. Multiple amplifiers can implement complete analog front ends without requiring four separate packages. Designers should also consider output loading, stability, noise, and the effect of the chosen feedback network when operating at higher frequencies. For new layouts, place bypass capacitors close to the supply pins and keep feedback paths compact to reduce parasitic feedback. Keep high-speed or high-current output loops physically separate from sensitive amplifier inputs. Verify the input common-mode range, output swing, load capability, and shutdown behavior against the manufacturer datasheet before applying the device outside its intended operating conditions. This page combines the manufacturer’s amplifier specifications with package information, application guidance, drop-in alternatives, and practical design notes. It is intended to help engineers identify whether the TLV2774IN’s combination of quad integration, 5.1 MHz bandwidth, 10.5 V/µs slew rate, and low-voltage CMOS operation fits a particular analog signal chain.

詢價 聯絡我們
TLV2888IDGKR - 36V 14MHz Zero-Drift Dual Op Amp | TI
TLV2888IDGKR

TLV2888IDGKR - 36V 14MHz Zero-Drift Dual Op Amp | TI

The Texas Instruments TLV2888IDGKR is a dual, zero-drift, CMOS precision operational amplifier designed for 36V systems and mux-friendly analog front ends. It combines a 14MHz gain-bandwidth product with a 40V/us slew rate and low 7.5nV/sqrtHz noise, making it one of the fastest zero-drift op amps available in an 8-VSSOP (DGK) package. The I-grade supports the -40C to +125C industrial temperature range, and the DGKR suffix indicates tape-and-reel packaging. A zero-drift operational amplifier uses auto-zero or chopper techniques to continuously cancel input offset voltage and thermal drift. In the system hierarchy: zero-drift op amp -> precision operational amplifier -> operational amplifier -> amplifier IC -> analog semiconductor. The TLV2888 belongs to the TLVx888 family (TLV888 single, TLV2888 dual, TLV4888 quad), optimized for applications needing both low DC error and wide signal bandwidth. Key features from the TI datasheet (TLVx888, Rev. B) include 3uV typical offset voltage, 0.01uV/C typical drift, and 150dB PSRR and 150dB CMRR. The input common-mode range extends to the negative rail and the output swings rail-to-rail, maximizing dynamic range on single supplies up to 36V. The mux-friendly input architecture minimizes charge-injection transients when inputs are switched, which is critical for multiplexed data-acquisition front ends feeding SAR or delta-sigma ADCs. The 14MHz bandwidth and 40V/us slew rate support fast sampled signals while preserving near-zero DC offset - a combination that distinguishes the TLV2888 from slower zero-drift amplifiers such as the OPA2187. Typical applications include multiplexed industrial data acquisition, high-precision sensor conditioning, motor-control current sensing, and servo or valve control loops where a 36V rail is available. Low offset and drift allow direct connection to precision ADCs like the ADS1220 without a separate auto-zero stage, and 150dB CMRR preserves accuracy across high common-mode voltages. Design tip: keep feedback resistors low enough to limit Johnson noise, decouple the supply pins close to the VSSOP-8 package, and avoid large capacitive loads on the output unless datasheet stability criteria are followed, or chopper ripple may increase. Pricing shown is indicative as of 2026-08-30.

詢價 聯絡我們
TLV2888IDGKR-Q1 - Dual 36V 14MHz Zero-Drift Op Amp | TI
TLV2888IDGKR-Q1

TLV2888IDGKR-Q1 - Dual 36V 14MHz Zero-Drift Op Amp | TI

The Texas Instruments TLV2888IDGKR-Q1 is an automotive-qualified, dual-channel, zero-drift (chopper-stabilized) CMOS precision operational amplifier rated for 36V operation with a 14MHz gain bandwidth product, supplied in an 8-pin VSSOP (DGK) package. It belongs to the TLVx888 family (TLV888, TLV2888, TLV4888) of wide-bandwidth, low-noise, mux-friendly op amps. A zero-drift operational amplifier is a precision amplifier architecture that periodically self-corrects its input offset voltage using chopper stabilization or auto-zero techniques. Within the amplifier hierarchy, it sits under operational amplifiers, precision amplifiers, and analog signal-conditioning ICs, delivering DC accuracy that conventional CMOS or bipolar op amps cannot achieve without trimming. Key features include a maximum input offset voltage of only 15uV, a maximum offset drift of 0.05uV/C over the wide temperature range, rail-to-rail I/O operation, and a very high slew rate with fast settling time enabled by the wide 14MHz bandwidth. The mux-friendly input design minimizes channel-switching glitches when the amplifier follows an analog multiplexer, a common requirement in automotive battery-management and sensor-multiplexed front ends. Architecturally, the TLV2888 uses a zero-drift CMOS core that suppresses 1/f noise and offset through internal auto-correction, combining the DC precision of chopper amplifiers with the wide AC bandwidth of a fast CMOS output stage. This makes it effective both as a precision DC amplifier and as a high-speed signal-chain buffer. Typical applications include automotive battery management systems, current-sense amplification after a shunt (pair with INA-family monitors), multiplexed sensor front ends driving ADCs, and industrial precision signal conditioning. The 36V rating tolerates automotive load-dump-adjacent rail conditions. Design consideration: zero-drift amplifiers generate internal chopping ripple; follow the TI datasheet layout recommendations and verify settle time when driving switched-capacitor ADC inputs. Price references are as of 2026-08-29.

詢價 聯絡我們