產品(39,000+)

DSPIC33FJ64MC506A-H/PT - 16-Bit DSC 64KB Flash 64-TQFP | Microchip
DSPIC33FJ64MC506A-H/PT

DSPIC33FJ64MC506A-H/PT - 16-Bit DSC 64KB Flash 64-TQFP | Microchip

The Microchip Technology DSPIC33FJ64MC506A-H/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC33F Motor Control family, delivering 20 MIPS performance, 64KB (64K x 8) FLASH memory, and 3.3V operation in a 64-pin TQFP (10x10 mm) surface-mount package. A Digital Signal Controller combines the compute architecture of a microcontroller with the math acceleration of a digital signal processor. Within the power-management hierarchy, the dsPIC33F family sits between general-purpose MCUs such as the PIC18 and dedicated DSP chips, offering single-cycle MAC instructions, hardware divide, and DSP engine features while retaining rich peripheral sets, interrupt structures, and flash self-programming typical of modern MCUs. Key features include the 16-bit dsPIC33F core rated at 20 MIPS, 64KB of on-chip flash for code storage, integrated motor-control PWM peripherals, a CAN 2.0B module for industrial networking, and multiple serial interfaces. The 64-TQFP (10x10) package exposes 64 I/O-capable pins suited to three-phase inverter drives with ample GPIO for gate drivers, current-sense amplifiers, and rotary or incremental encoders. Architecturally, the dsPIC33F core pairs a 16-bit pipeline with a dedicated DSP engine supporting MAC and DSP-style addressing, plus fast interrupt context switching important for field-oriented control (FOC) loops. The Motor Control PWM peripheral generates complementary or independent PWM outputs with dead-time insertion, while the high-speed ADC synchronizes sampling to PWM events for low-latency current measurement. Typical applications include brushless DC (BLDC) motor drives, single- and three-phase induction motor control, switched reluctance motor systems, uninterruptible power supplies (UPS), and power-inverter control, all use cases named directly by Microchip for this family. The CAN interface extends use into automotive-adjacent industrial nodes. Design consideration: this is the -H temperature grade (operating range narrower than the -I industrial grade); confirm ambient conditions or select DSPIC33FJ64MC506A-I/PT for extended temperature environments. Decouple the 3.3V supply per the manufacturer datasheet and use the ECAN/UART bootloaders for field updates. This page synthesizes distributor pricing tiers, drop-in alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet, providing information gain for sourcing and engineering evaluation.

詢價 聯絡我們
DSPIC33FJ64MC506A-I/MR - 16-bit DSC 40MIPS 64KB Flash | Microchip
DSPIC33FJ64MC506A-I/MR

DSPIC33FJ64MC506A-I/MR - 16-bit DSC 40MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC506A-I/MR is a 16-bit digital signal controller (DSC) delivering 40 MIPS from a 40 MHz CMOS core, with 64 KB (8192 words) of Flash program memory and 8 KB of data RAM, housed in a 64-pin VQFN (9x9 mm) package rated from -40C to +85C. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral integration and ease of use of a microcontroller (MCU). Within the power-management hierarchy, the dsPIC33FJ family sits between general-purpose MCUs and dedicated DSPs, offering hardware multiply-accumulate, barrel shifting, and multiple internal bus architectures for deterministic real-time control loops. Key features include 11 timers, 8 DMA channels, and 4 serial I/O ports, enabling complex control and signal processing tasks. The device is optimized for motor control and includes CAN connectivity per the Microchip product page. Boundary scan capability and a barrel shifter support diagnostics and efficient data manipulation. Architecturally, the dsPIC33FJ64MC506A uses the dsPIC33FJ core with DSP engine support for single-cycle MAC operations, making it well-suited for field-oriented control (FOC) and other math-intensive algorithms. Peripherals include motor-control PWM and advanced analog resources as described in the Microchip 374-page family datasheet. Typical applications include brushless DC (BLDC) motors, single- and 3-phase induction motors, switched reluctance motors, uninterruptible power supplies (UPS), and digital power conversion, all explicitly listed by Microchip for this family. Design consideration: the supply range is 3.0V to 3.6V, so a 3.3V LDO or buck regulator with low ripple is recommended; decouple all VDD/VDDCORE pins per the manufacturer datasheet layout guidance. This page synthesizes distributor pricing context, drop-in family alternatives, and design notes not consolidated in the manufacturer datasheet. Pricing shown is an estimate as of 2026-09-27; verify live quotes with your distributor.

詢價 聯絡我們
DSPIC33FJ64MC506A-I/PT - 16-bit 40MIPS Motor Control DSC | Microchip
DSPIC33FJ64MC506A-I/PT

DSPIC33FJ64MC506A-I/PT - 16-bit 40MIPS Motor Control DSC | Microchip

The Microchip Technology DSPIC33FJ64MC506A-I/PT is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance with 64KB (64K x 8) Flash program memory and 8KB RAM, housed in a 64-pin TQFP (10x10 mm) surface-mount package rated from -40C to +85C. A digital signal controller combines the computational power of a digital signal processor (DSP) with the peripheral integration and control architecture of a microcontroller (MCU). Within the power-management hierarchy, the dsPIC33F family sits above basic MCUs and competes directly with 16-bit DSP devices for embedded motor control and digital power conversion, providing single-cycle multiply-accumulate (MAC) and DSP instructions on top of a conventional microcontroller toolchain. Key features include 40 MIPS operation from an internal PLL, 8-channel DMA, 11 timers, a CAN 2.0B module for industrial networking, and four serial I/O interfaces (UART, SPI, I2C) plus motor-control PWM peripherals. The device also provides a barrel shifter and boundary-scan (JTAG) debug support, as documented by Microchip and distributor listings. Architecturally, the dsPIC33FJ64MC506A uses a modified Harvard pipeline with multiple internal bus architectures, allowing simultaneous instruction fetch and data access. The dedicated motor-control PWM module with complementary outputs and dead-time insertion enables direct control of brushless DC (BLDC) motors, single- and three-phase induction motors, and switched reluctance motors without external sequencing logic. A 12-bit analog domain with multiple ADC channels supports current-sense sampling synchronized to PWM cycles. Typical applications include BLDC and PMSM motor drives, digital power supplies and UPS systems, induction cooking, and industrial automation nodes requiring CAN connectivity. The motor-control peripheral set maps directly onto sensorless FOC and six-step control algorithms. Design consideration: the VDDCORE/VCAP pin requires an external capacitor for the internal 2.5V core regulator; a 10uF low-ESR capacitor on VCAP is critical for stable operation. Power the analog domain (AVDD) from a filtered 3.3V rail for accurate ADC results. This page synthesizes distributor pricing, drop-in memory/peripheral family alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.

詢價 聯絡我們
DSPIC33FJ64MC506AT-I/MR - 16-bit DSC, 40 MIPS, 64KB Flash | Microchip
DSPIC33FJ64MC506AT-I/MR

DSPIC33FJ64MC506AT-I/MR - 16-bit DSC, 40 MIPS, 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC506AT-I/MR is a 16-bit dsPIC33F digital signal controller delivering 40 MIPS from 64KB of FLASH program memory, operating at 3.3V and housed in a 64-pin VQFN (9x9 mm) exposed-pad package supplied on tape and reel. A digital signal controller (DSC) is a single-chip device that merges the computational power of a digital signal processor with the peripheral integration and control-oriented architecture of a microcontroller. Within the power management hierarchy of embedded systems, DSCs occupy the tier above general-purpose MCUs for control loops, sitting below multi-core application processors. The dsPIC33F family from Microchip implements a modified Harvard, 16-bit RISC architecture with DSP instructions, making it a mainstream choice for real-time control. Key features of this device include a 40 MIPS instruction throughput, 64KB (64K x 8) of self-programmable FLASH, 8KB of data RAM, 11 timers, 8 DMA channels, and 4 serial I/O ports for flexible connectivity. These peripherals allow complex control and signal-processing tasks, such as multi-channel motor control and sensor fusion, to be handled without external logic. The architecture pairs the 16-bit CPU core with dedicated DSP engine hardware supporting multiply-accumulate operations, which is essential for control-law execution such as field-oriented control of PMSM and brushless DC motors. The A-variant silicon integrates the enhanced feature set of the dsPIC33FJ64MC506A family while retaining seamless migration paths to PIC24 MCUs and dsPIC30F DSCs in similar packages. Typical applications include brushless DC motor drives, single- and 3-phase induction motor control, switched reluctance motor systems, uninterruptible power supplies, and digital power conversion, where deterministic interrupt latency and DSP throughput are required. Designers should note the 3.0V to 3.6V supply range and the -40C to +85C industrial temperature rating of the I suffix; the exposed-pad QFN requires a solid ground connection for thermal and electrical performance. This page synthesizes distributor availability, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet, with pricing referenced as of 2026-09-27.

詢價 聯絡我們
DSPIC33FJ64MC508-I/PT - 16-bit DSC 40 MIPS 64KB Flash | Microchip
DSPIC33FJ64MC508-I/PT

DSPIC33FJ64MC508-I/PT - 16-bit DSC 40 MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC508-I/PT is a 16-bit dsPIC33F Digital Signal Controller (DSC) delivering 40 MIPS from a 64KB (64K x 8) Flash program memory, housed in an 80-pin TQFP (12 x 12 mm) package with industrial temperature rating of -40C to +85C. A Digital Signal Controller combines the computational throughput of a DSP with the peripheral integration and ease of use of a microcontroller (MCU). Within the power-management hierarchy of embedded control, a DSC sits above general-purpose MCUs for control-loop-intensive tasks: the dsPIC33F core executes DSP instructions (MAC, DSP multiply, modulo addressing) that make high-speed digital control loops, digital filters, and digital audio processing practical on a single chip. The dsPIC33FJ64MC508 belongs to the dsPIC33FJXXXMCX06/X08/X10 Motor Control family, which Microchip positions for seamless migration to/from PIC24 MCUs and dsPIC30F DSCs in similar packages. Key features include the 16-bit dsPIC33F core operating at up to 40 MIPS, 64KB of self-programmable Flash, on-chip DSP engine, motor-control-oriented peripherals (PWM and ADC modules), and multiple PGECx/PGEDx pin pairs supporting In-Circuit Serial Programming (ICSP) and in-circuit debugging with tools such as MPLAB SNAP. The part operates from a 3.3V supply per the dsPIC33F family architecture. From a technical standpoint, the dsPIC33FJXXXMCX06/X08/X10 family is designed to execute digital filter algorithms, high-speed precision digital control loops, and digital audio and speech processing. The MC (Motor Control) peripheral set in the -MC508 variant provides hardware PWM resources and fast ADC sampling suited to field-oriented control and other servo-loop topologies, while Boundary-Scan (JTAG BSDL) data is published for the 80-pin TQFP package for manufacturing test. Typical applications include brushless DC and permanent-magnet motor drives, digital power supplies (Power Factor Correction, LLC control), inverters and solar converters, and embedded control systems requiring DSP-class math with MCU-class peripherals. Design consideration: the device exposes more than one pair of PGECx/PGEDx programming pins; ICSPCLK and ICSPDAT must be used as a matched pair (e.g., PGEC2 with PGED2), and all VDD/VSS pins must be connected or programming may fail. This page synthesizes verified distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

詢價 聯絡我們
DSPIC33FJ64MC508A-I/PT - 16-bit DSC 40MIPS 64KB Flash | Microchip
DSPIC33FJ64MC508A-I/PT

DSPIC33FJ64MC508A-I/PT - 16-bit DSC 40MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC508A-I/PT is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance, 64 KB (64K x 8) of flash program memory, and motor-control-optimized peripherals, housed in an 80-pin TQFP (12x12 mm, PT) package rated from -40C to +85C with a 3.0V to 3.6V supply. A digital signal controller combines the compute power of a DSP with the peripheral integration and ease of use of a microcontroller. In the power-management hierarchy, the dsPIC33F family sits between general-purpose MCUs and standalone DSPs, making it the natural choice for closed-loop digital control systems such as switched-mode power supplies and motor drives. Key features include the 40 MIPS dsPIC33F core with DSP engine (dual 40-bit accumulators, 17-bit x 17-bit single-cycle MAC), 64 KB flash with self-programming, 8 KB SRAM, CAN 2.0B, multiple UART/SPI/I2C ports, and motor control PWM (MCPWM) outputs with dead-time insertion and fault inputs. The A-suffix revision improves upon the original dsPIC33FJ64MC508 with enhanced analog and peripheral behavior. The architecture executes digital filter algorithms, high-speed precision digital control loops, and digital audio/speech processing efficiently. Five 16-bit timers, an input capture/output compare bank, and a 10-bit ADC with simultaneous multi-channel sampling support sensorless FOC and field-oriented motor algorithms at loop rates unattainable on general-purpose MCUs. Typical applications include brushless DC motor control, single and 3-phase induction motor drives, switched reluctance motor control, uninterruptible power supplies, digital power conversion, and CAN-networked industrial nodes. Design consideration: the dsPIC33FJ core requires a VCAP/ENVREG pin connection to regulate the internal 2.5V core supply - tie ENVREG to VDD for internal regulation and place a low-ESR 10 uF capacitor on VCAP. Decouple each VDD pin with 0.1 uF ceramics. This page synthesizes distributor pricing, pin-compatible drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
DSPIC33FJ64MC508AT-I/PT - 16-bit 40 MIPS DSC 64KB Flash | Microchip
DSPIC33FJ64MC508AT-I/PT

DSPIC33FJ64MC508AT-I/PT - 16-bit 40 MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC508AT-I/PT is a 16-bit dsPIC33F digital signal controller (DSC) delivering up to 40 MIPS from a 64 KB (64K x 8) FLASH program memory with 8 KB of RAM, supplied in an 80-pin TQFP (12x12 mm, 0.5 mm pitch) surface-mount package rated for -40C to +85C operation. A digital signal controller combines the computational core of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy, a DSC such as the dsPIC33F sits between general-purpose MCUs and dedicated DSPs, providing single-cycle MAC and DSP instructions alongside familiar MCU peripherals, making it a bridge product in embedded control semiconductors. Key features include the 16-bit dsPIC33FJ core clocked at up to 40 MIPS, 64 KB of self-programming FLASH, 8 KB of L1 data RAM, 8 DMA channels that move data without CPU intervention, 9 timers, 69 general-purpose I/O pins, and an 18-channel A/D converter supporting 10-bit and 12-bit modes. Communication peripherals include ECAN, I2C, SPI, and UART, enabling integration into industrial networks and multi-chip systems. The device uses a CMOS process and is part of the dsPIC33F Motor Control family, which provides dedicated PWM peripherals and advanced analog integration aimed at real-time control loops. The A/D converter can sample multiple channels concurrently with the PWM units, a topology that suits field-oriented motor control and digital power conversion where ADC sampling must be synchronized to switching events. Typical applications include brushless DC motor drives, single- and 3-phase induction motor control, switched reluctance motors, uninterruptible power supplies, digital power supplies, solar inverters, and industrial automation nodes that require ECAN networking. Per Microchip's product page, the dsPIC33FJ64MC508A family explicitly targets these motor control and UPS use cases. Design consideration: the dsPIC33FJ64MC508A operates from a 3.0 V to 3.6 V supply, so level shifting is required when interfacing with 5 V logic; decouple VDD/VDDCORE per the manufacturer datasheet and take advantage of the tape-and-reel (-T) suffix for automated assembly. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, adding selection guidance beyond standard catalog listings.

詢價 聯絡我們
DSPIC33FJ64MC508T-I/PT - 16-bit DSC, 40 MIPS, 64KB Flash | Microchip
DSPIC33FJ64MC508T-I/PT

DSPIC33FJ64MC508T-I/PT - 16-bit DSC, 40 MIPS, 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC508T-I/PT is a 16-bit dsPIC33F digital signal controller (DSC) delivering 40 MIPS from a modified Harvard dsPIC core, with 64KB (64K x 8) of FLASH program memory, 8KB of RAM, and an 80-pin TQFP (12x12 mm) surface-mount package. It operates from a 3V to 3.6V supply across an industrial -40C to +85C temperature range. A digital signal controller combines the deterministic architecture and peripherals of a microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. In the power-management hierarchy, a DSC such as the dsPIC33F family member is a single-chip embedded processor that closes high-speed control loops - for example running field-oriented control of motors - that conventional 8-bit MCUs cannot execute fast enough or with sufficient numerical precision. Key features include the 40 MIPS core executing up to 80 million MAC operations per second, motor-control PWM peripherals with complementary outputs and dead-time insertion, multiple 10-bit ADCs, UART/SPI/I2C communication ports, and a phase-locked loop (PLL) clock system that generates 40 MIPS operation from a low-cost crystal. The FLASH program memory supports in-circuit serial programming (ICSP) and self-programming for field updates. Technically, the device pairs the dsPIC33F 16-bit CPU with dedicated DSP instructions (40-bit wide accumulators, dual operand fetch) and single-cycle multiply, enabling real-time control bandwidths in the tens of kilohertz. Code is pin-compatible and source-compatible across the dsPIC33FJ64MC50x family, and Microchip documents seamless migration to PIC24 MCUs and dsPIC30F DSCs in similar packages. Typical applications include brushless DC (BLDC), single/three-phase induction and switched-reluctance motor control, digital power supplies (power factor correction, LLC converters), solar inverters, and industrial motion-control systems where the on-chip high-resolution PWM and fast ADC are directly matched to the control problem. A key design consideration: the core supply is internally regulated, so the VCAP pin requires the specified low-ESR capacitor close to the pin for stable operation, and all VDD/VSS pairs must be decoupled individually. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.

詢價 聯絡我們
DSPIC33FJ64MC510-I/PF - 16-bit 40 MIPS DSC 64KB Flash | Microchip
DSPIC33FJ64MC510-I/PF

DSPIC33FJ64MC510-I/PF - 16-bit 40 MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC510-I/PF is a 16-bit digital signal controller (DSC) delivering 40 MIPS from its dsPIC33F core, with 64KB (64K x 8) of FLASH program memory, 8KB of RAM, and industrial -40C to +85C operation in a 100-pin TQFP (14x14 mm, 0.5 mm pitch) package. A digital signal controller combines the computational capability of a DSP with the peripheral integration and control architecture of a microcontroller, sitting within the broader hierarchy of digital signal processors and microcontroller units (MCUs). The dsPIC33F family integrates a 16-bit modified Harvard architecture CPU with DSP engine instructions, making it a natural evolution path from PIC24 MCUs and dsPIC30F DSCs with seamless migration options. Key features of the DSPIC33FJ64MC510-I/PF include the 40 MIPS core at 3.3V operation, 8192 words of RAM, 8 DMA channels for data throughput without CPU intervention, and 9 timers for precise event sequencing. The Motor Control (MC) peripheral set targets power conversion and motor drive topologies with dedicated PWM capability. Architecturally, the device offers more than one pair of PGECx/PGEDx pins for in-circuit serial programming (ICSP); any pair may be used, but PGECx and PGEDx must be used as a matched pair. All VDD and VSS pins must be connected for reliable operation and programming. Typical applications include brushless DC motors, single and 3-phase induction motors, switched reluctance motors, uninterruptible power supplies, and digital power conversion, where the MC family peripherals and 40 MIPS throughput provide deterministic closed-loop control. Design consideration: this part is marked Not Recommended for New Designs (NRND) by Microchip; new projects should evaluate the dsPIC33FJ64MC510A revision or newer dsPIC33 families, while existing designs can continue sourcing. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
DSPIC33FJ64MC510-I/PT - 16-Bit 40MIPS Motor Control DSC | Microchip
DSPIC33FJ64MC510-I/PT

DSPIC33FJ64MC510-I/PT - 16-Bit 40MIPS Motor Control DSC | Microchip

The Microchip Technology DSPIC33FJ64MC510-I/PT is a 16-bit dsPIC33F Digital Signal Controller (DSC) delivering up to 40 MIPS performance, 64 KB of on-chip Flash program memory, and a 3.0V to 3.6V supply range, housed in a 100-pin TQFP (12x12 mm) package rated from -40C to +85C. A Digital Signal Controller combines the computational throughput of a Digital Signal Processor (DSP) with the peripheral set and ease of use of a microcontroller. In the power-management hierarchy, DSCs sit between general-purpose MCUs and dedicated DSPs, making them the standard choice for closed-loop digital control of power electronics and motor drives where fast multiply-accumulate operations and precise PWM timing are both required. Key differentiating features of this device include the 40 MIPS dsPIC33F core with DSP instruction extensions for digital filter algorithms and high-speed control loops, a motor-control peripheral set purpose-built for inverter and drive applications, and seamless migration options to/from PIC24 MCUs and dsPIC30F DSCs, protecting code investment across platforms. The 64 KB Flash supports self-programming, and the device is in-circuit serial programmable (ICSP) via any PGECx/PGEDx pin pair. Architecturally, the dsPIC33F core executes most instructions in a single cycle at up to 40 MIPS, with hardware support for modulo and bit-reversed addressing, dual operand fetch, and Proportional-Integral-Derivative (PID) oriented operations. According to the Microchip datasheet, the family is designed to execute digital filter algorithms, high-speed precision digital control loops, and digital audio and speech processing. Typical applications include brushless DC motor control, single- and 3-phase induction motor drives, switched reluctance motors, uninterruptible power supplies, and digital power conversion. Microchip explicitly positions the dsPIC33FJ64MC510A family for these motor control domains. Design tip: connect every VDD and VSS pin pair, and use a matched PGECx/PGEDx pair for programming - mismatched pairs are a common cause of ICSP failure. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

詢價 聯絡我們
DSPIC33FJ64MC510A-E/PF - 16-bit 40 MIPS DSC 64KB | Microchip
DSPIC33FJ64MC510A-E/PF

DSPIC33FJ64MC510A-E/PF - 16-bit 40 MIPS DSC 64KB | Microchip

The Microchip Technology DSPIC33FJ64MC510A-E/PF is a 16-bit digital signal controller (DSC) from the dsPIC33FJ64MC510A motor-control family, delivering 40 MIPS of core performance with 64KB (64K x 8) of flash program memory and 8192 words of RAM, housed in a 100-pin TQFP (14x14 mm, PF) package rated from -40C to +125C. A digital signal controller combines the deterministic control of a microcontroller unit (MCU) with the math throughput of a digital signal processor (DSP) on a single die. In the power-management hierarchy, the dsPIC33F sits between general-purpose MCUs (such as PIC18) and standalone DSPs, offering MCU-class peripherals with DSP-class multiply-accumulate (MAC) instructions for real-time control loops. Key features include 2 CAN 2.0B modules, 4 UART ports, 2 SPI and 2 I2C peripherals, 8-channel DMA, and 9 timers, alongside a high-speed motor-control PWM (MCPWM) module purpose-built for field-oriented control. An on-chip 12-bit ADC with multiple sample-and-hold inputs supports simultaneous multi-phase current sampling at motor-loop rates. The device executes the modified Harvard dsPIC33F core at 40 MIPS from an internal PLL, with single-cycle MAC and DSP multiply instructions enabling FOC, PID, and sensorless estimation algorithms in tight control-loop timing budgets. Typical applications include brushless DC (BLDC) motors, single- and 3-phase induction motors, switched reluctance motors, uninterruptible power supplies (UPS), and automotive AEC-Q100-qualified traction and pump-control nodes. When designing with the -E variant, remember the extended temperature rating allows full-speed operation at 125C ambient; keep the 3.3V rail within 3.0-3.6V and decouple all VDD/VSS pairs, including the core regulator connections, per the manufacturer datasheet. This page synthesizes distributor pricing, drop-in alternatives within the dsPIC33FJ64MC510A family, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
DSPIC33FJ64MC510A-I/PF - 16-bit DSC, 40 MIPS, 64KB Flash | Microchip
DSPIC33FJ64MC510A-I/PF

DSPIC33FJ64MC510A-I/PF - 16-bit DSC, 40 MIPS, 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC510A-I/PF is a 16-bit digital signal controller (DSC) delivering 40 MIPS of performance with 64KB of flash program memory and 8KB (8192 words) of RAM, housed in a 100-pin TQFP package measuring 14x14 mm with 0.5 mm terminal pitch. A digital signal controller combines the peripheral set and ease of use of a microcontroller with the computational throughput of a digital signal processor. Within the power-management hierarchy, the dsPIC33F family occupies the motor-control and digital-power layer, sitting above generic MCUs because it integrates dedicated DSP multiply-accumulate (MAC/DSP) instructions with deterministic interrupt latency. The dsPIC33FJ64MC510A belongs to the Motor Control (MC) subfamily, which Microchip positions for seamless migration to PIC24 MCUs and the older dsPIC30F DSC generation. Key features include 8-channel DMA for offloading data movement, 9 timers, 4 serial I/O ports, and CAN connectivity, which is why the family is explicitly optimized for motor control and CAN-based networks. The 40 MIPS core executes DSP-class instructions needed for field-oriented control (FOC), sensorless commutation, and power-conversion control loops running at switching frequencies of tens of kilohertz. From an architecture standpoint, the device is a CMOS 16-bit core with a modified Harvard bus structure, supporting efficient DSP MAC operations while retaining the interrupt structure and peripherals familiar to PIC24 designers. The A-variant (suffix A in the part number) denotes the revised silicon stepping within the dsPIC33FJ64MC510A family, and the -I temperature grade covers -40C to +85C for industrial deployment. The 100-pin TQFP (JESD-30 code S-PQFP-G100) with gull-wing terminals supports standard surface-mount reflow assembly. Typical applications include brushless DC (BLDC) motor drives, single- and 3-phase induction motor control, switched reluctance motors, digital power supplies (uninterruptible and switch-mode), and industrial automation nodes that require CAN networking alongside real-time control. Microchip explicitly markets the family for these motor-control and uninterruptible power supply use cases. When designing with this controller, budget the 3.3V supply rail carefully: all I/O and core power is derived from a single 3V-class domain, so provide adequate decoupling on every VDD/VDDCORE pair and verify that the motor-control PWM peripherals have sufficient pin availability on the 100-pin footprint before locking your schematic. This page synthesizes distributor pricing context, drop-in family alternatives, and practical design notes beyond what the manufacturer datasheet provides, improving selection efficiency for engineers comparing dsPIC33F motor-control variants.

詢價 聯絡我們
DSPIC33FJ64MC510A-I/PT - 16-bit DSC 40MIPS 64KB Flash | Microchip
DSPIC33FJ64MC510A-I/PT

DSPIC33FJ64MC510A-I/PT - 16-bit DSC 40MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC510A-I/PT is a 16-bit Digital Signal Controller (DSC) delivering 40 MIPS performance with 64KB (64K x 8) of Flash program memory and a 40 MHz system clock, housed in a 100-pin TQFP (12x12 mm) package operating from 3.3V across the -40C to +85C industrial temperature range. A Digital Signal Controller combines the computational throughput of a Digital Signal Processor (DSP) with the peripheral integration and ease of use of a microcontroller (MCU). In the power-management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP, making it the preferred choice for closed-loop control systems that require both fast multiply-accumulate operations and flexible I/O. The dsPIC33FJ64MC510A belongs to Microchip's dsPIC33F Motor Control family, architected specifically for precision digital control loops. Key features include the 16-bit dsPIC33F core executing up to 40 MIPS, DSP engine with single-cycle MAC and dual operand fetch, and motor-control oriented peripherals suited to field-oriented control (FOC) algorithms. The 'A' revision of the silicon incorporates improvements over the original dsPIC33FJ64MC510, and the family offers seamless migration options to PIC24 MCUs and dsPIC30F DSCs, protecting software investment. Technically, the dsPIC33F core executes digital filter algorithms, high-speed precision digital control loops, and digital audio and speech processing efficiently. The device operates at 3.3V and integrates the motor-control peripheral set of the dsPIC33F MC family, enabling high-performance, precision motor-control systems with a single chip handling sensing, control-loop computation, and PWM generation. Typical applications include brushless DC (BLDC) motor control, single- and 3-phase induction motor drives, switched reluctance motor systems, and uninterruptible power supplies (UPS), where the 40 MIPS core sustains the fast current and voltage control loops these topologies demand. Design consideration: budget the 64KB Flash carefully - FOC implementations with sensory/sensorless observers and communication stacks can consume significant program space; the pin-compatible 256KB Flash member of the same 100-TQFP family provides headroom for growth. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-09-27.

詢價 聯絡我們
DSPIC33FJ64MC510AT-I/PF - 16-bit 40 MIPS DSC 64KB Flash | Microchip
DSPIC33FJ64MC510AT-I/PF

DSPIC33FJ64MC510AT-I/PF - 16-bit 40 MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC510AT-I/PF is a 16-bit digital signal controller (DSC) from the dsPIC33FJ64MC510A Motor Control family, delivering 40 MIPS performance, 64KB (64K x 8) of FLASH program memory and 8KB of RAM in a 100-pin TQFP (14x14 mm, 0.5 mm pitch) package. A digital signal controller combines the compute power of a DSP with the peripheral integration and control architecture of a microcontroller. Within the power management hierarchy, the DSC sits between a general-purpose MCU and a standalone DSP: it executes math-intensive control loops (PID, field-oriented control) while handling communication, timing and I/O tasks on a single chip. The dsPIC33F family uses a modified Harvard, C compiler-optimized 16-bit core with DSP engine support. Key features include a 16-bit dsPIC33F core running at up to 40 MIPS, CAN 2.0B, I2C, SPI, UART/USART and IrDA/LINbus connectivity, 8 DMA channels for low-CPU-overhead data movement, and 9 timers for motor control and measurement tasks. Multiple PWM-capable outputs make the MC (Motor Control) variant well suited to power electronics. The device is fabricated in CMOS technology and integrates the DSP multiply-accumulate (MAC) class instructions needed for sensorless motor algorithms and digital power conversion. The 100-pin TQFP exposes a large peripheral set, allowing one chip to drive inverter stages, handle CAN networking, and service host communication simultaneously. Typical applications include brushless DC motor control, single- and 3-phase induction motor drives, switched reluctance motors, uninterruptible power supplies, digital power supplies, and industrial automation nodes requiring CAN connectivity. Design consideration: the dsPIC33FJ64MC510A family offers seamless migration to PIC24 MCUs and dsPIC30F DSCs, so design the PCB with flash-size headroom in mind - a 256KB variant in the same footprint allows firmware growth without respin. This page synthesizes distributor pricing, drop-in alternatives, comparison data and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
DSPIC33FJ64MC510AT-I/PT - 16-bit DSC, 40 MIPS, 64KB Flash | Microchip
DSPIC33FJ64MC510AT-I/PT

DSPIC33FJ64MC510AT-I/PT - 16-bit DSC, 40 MIPS, 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC510AT-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33F Motor Control family, delivering 40 MIPS performance, 64KB of program flash memory, and 8KB of data RAM in a 100-pin TQFP (12x12 mm) package, operating from a 3.0V to 3.6V supply over an industrial -40C to +85C temperature range. A digital signal controller is a hybrid device that merges the deterministic interrupt latency and peripheral set of a microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. In the power-management hierarchy, the DSC sits between general-purpose MCUs (such as the PIC24) and standalone DSPs, making it the preferred controller class for closed-loop control systems such as motor drives and switching power supplies where both fast math and rich peripherals are required. Key features include a 16-bit modified Harvard architecture with a DSP instruction set (40-bit wide accumulators, single-cycle MAC, dual operand fetch), 8 DMA channels for data-intensive peripheral transfers, 9 timers, and 4 serial I/O ports. The motor-control periphery includes dedicated PWM modules with complementary outputs, dead-time insertion, and ADC with simultaneous multi-channel sampling, which are essential for field-oriented control of three-phase motors. The device executes at up to 40 MIPS from an internal fast RC oscillator with PLL or an external crystal, eliminating the need for precision clock components in many cost-sensitive drives. Flash program memory is rated for in-circuit self-programming, allowing firmware field updates and bootloader deployment. The CMOS process yields low active power consumption, and a wide operating voltage window of 3.0V to 3.6V tolerates noisy industrial supply rails with simple 3.3V regulation. Typical applications include brushless DC (BLDC), permanent-magnet synchronous (PMSM), single and 3-phase induction, and switched reluctance motor control; digital power supplies such as LLC and totem-pole PFC stages; solar inverters; and uninterruptible power supplies. The dedicated motor-control PWM and fast ADC make this part especially well suited to sensorless FOC algorithms executing at 10-20 kHz control-loop rates. For design, budget the ADC sampling to align with the PWM period trigger to minimize jitter, and place the controller within a few centimeters of gate drivers to keep PWM edges clean. The TQFP-100 offers 85 general-purpose I/O, providing headroom for communication, protection, and sensing functions on one footprint. This page synthesizes distributor availability, drop-in same-package alternatives, comparison data, and practical design guidance not found in the manufacturer datasheet.

詢價 聯絡我們
DSPIC33FJ64MC510T-I/PF - 16-Bit 40MIPS DSC 64KB | Microchip
DSPIC33FJ64MC510T-I/PF

DSPIC33FJ64MC510T-I/PF - 16-Bit 40MIPS DSC 64KB | Microchip

The Microchip Technology DSPIC33FJ64MC510T-I/PF is a 16-bit dsPIC33F digital signal controller (DSC) delivering up to 40 MIPS performance, with 64KB (64K x 8) of FLASH program memory, housed in a 100-pin TQFP (14 x 14 mm) package rated for -40C to +85C industrial operation. A digital signal controller combines the compute architecture of a microcontroller (MCU) with the mathematical acceleration of a digital signal processor (DSP). The dsPIC33F family sits within Microchip's 16-bit portfolio, above the PIC18 8-bit MCUs and alongside PIC24 MCUs, which share the same core. This makes the DSC category ideal for control loops that need fast multiply-accumulate operations, such as field-oriented motor control and digital power conversion. Key features include the 16-bit dsPIC core with dedicated 16x16 hardware multiplier and hardware division support, 40 MIPS execution from an internal PLL, 64KB self-programmable FLASH, and a rich peripheral set including motor-control PWM and multiple serial ports. The dsPIC33FJ64MC510A variant documents 8 DMA channels, 9 timers, and 8192 words of RAM in the same 100-pin TQFP (S-PQFP-G100, 0.50 mm pitch) outline, illustrating the family's peripheral density. Architecturally, the dsPIC33F CPU incorporates hardware support for both multiplication and division, per the dsPIC33F Family Reference Manual (DS70165E), with a modified Harvard architecture that enables deterministic single-cycle MAC execution. Flash self-programming supports field firmware updates, and seamless migration paths exist to PIC24 MCUs and dsPIC30F devices. Typical applications center on motor control: brushless DC (BLDC) motors, single- and three-phase induction motors, and switched reluctance motors, as well as digital power supplies, uninterruptible power supplies (UPS), and industrial automation nodes where deterministic 40 MIPS control loops are required. When designing with this DSC, connect all VDD and VSS pins; per Microchip documentation, programming can fail if any power pin is left unconnected. ICSP programming requires a matched PGECx/PGEDx pair. This page synthesizes distributor pricing, drop-in alternatives, pinout guidance, and practical design notes not found in a single manufacturer datasheet.

詢價 聯絡我們
DSPIC33FJ64MC510T-I/PT - 40 MIPS 16-bit Motor Control DSC | Microchip
DSPIC33FJ64MC510T-I/PT

DSPIC33FJ64MC510T-I/PT - 40 MIPS 16-bit Motor Control DSC | Microchip

The Microchip Technology DSPIC33FJ64MC510T-I/PT is a 16-bit dsPIC33F motor-control digital signal controller (DSC) delivering 40 MIPS performance with 64KB of FLASH program memory, 8KB of data RAM, and a 3.3V supply rail, housed in a 100-pin TQFP (PT, 12x12 mm) surface-mount package. A digital signal controller combines the deterministic architecture and peripherals of a microcontroller with the math acceleration of a DSP core. In the power-management hierarchy, the dsPIC33F sits above general-purpose MCUs (such as the PIC18 family) and alongside dedicated DSPs: its 16-bit modified Harvard architecture executes single-cycle MAC and DSP instructions, making it a middle tier between an MCU and a full digital signal processor. Key features of this device include the dsPIC 33F core rated at 40 MIPS, 64KB (64K x 8) of self-programmable FLASH for code storage, 8KB of SRAM for data, and an on-chip 10-bit analog-to-digital converter with up to 12 input channels. The Motor Control family adds hardware peripherals purpose-built for digital power and motion: complementary PWM generation, output-compare and input-capture modules, and UART/SPI/I2C serial engines for system communication. Architecturally, the dsPIC33FJ64MC510 implements the dsPIC33F 16-bit pipeline that sustains one instruction per cycle at 40 MIPS, and Microchip documents seamless migration options both upward to higher-memory dsPIC33F devices and laterally to PIC24 MCUs, protecting software investment across the family. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor drives, digital power supplies and power factor correction converters, inverters and UPS systems, and industrial automation control nodes where a 3.3V controller with fast PWM and 12-channel ADC sampling is required. A key design consideration: all VDD/VSS pairs on the 100-pin TQFP must be connected, and ICSP programming must use matched PGECx/PGEDx pin pairs (for example PGEC2 with PGED2), otherwise programming may fail - a common pitfall documented in Microchip's family reference material. This page synthesizes distributor availability, same-package drop-in alternatives, and design guidance not consolidated in the manufacturer datasheet, with pricing references current as of 2026-09-27.

詢價 聯絡我們
DSPIC33FJ64MC706-I/PT - 16-bit DSC 40 MIPS 64KB Flash | Microchip
DSPIC33FJ64MC706-I/PT

DSPIC33FJ64MC706-I/PT - 16-bit DSC 40 MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC706-I/PT is a 16-bit Digital Signal Controller (DSC) delivering up to 40 MIPS from 64KB (64K x 8) of Flash program memory, operating from a 3V to 3.6V supply and housed in a 64-pin TQFP (10x10 mm) package. A Digital Signal Controller blends the control peripherals and ease of use of a microcontroller with the mathematical throughput of a DSP into a single-chip solution. Within the power-management hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs, and Microchip's dsPIC33F family offers seamless migration options to PIC24 MCUs and dsPIC30F DSCs in similar packages. Key features include the 16-bit dsPIC33F CPU core with DSP engine (barrel shifter, 40-bit accumulator, MAC instructions), 40 MIPS maximum core speed from an internal PLL, motor-control oriented peripherals, and multiple PWM outputs suitable for three-phase inverter control. Flash program memory supports in-circuit programming via PGECx/PGEDx pin pairs. The device incorporates a multiple internal bus architecture that allows instruction fetch and data access in the same cycle, sustaining the 40 MIPS rating. The Motor Control PWM module and high-speed ADC sampling support field-oriented control and other advanced motor algorithms. Multiple PGECx/PGEDx debug channels simplify in-circuit emulation with standard Microchip tools. Typical applications include three-phase motor drives (BLDC, PMSM, AC induction), digital power supplies and inverters, and industrial automation sensing and control nodes that require deterministic DSP-class math. Design consideration: all VDD and VSS pins must be connected, and any single PGECx/PGEDx pair must be used together for ICSP programming - mixing pins from different pairs will cause programming to fail. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
DSPIC33FJ64MC706A-E/MR - 16-bit 40MIPS DSC 64KB | Microchip
DSPIC33FJ64MC706A-E/MR

DSPIC33FJ64MC706A-E/MR - 16-bit 40MIPS DSC 64KB | Microchip

The Microchip Technology DSPIC33FJ64MC706A-E/MR is a 16-bit digital signal controller (DSC) delivering 40 MIPS from a 40 MHz core, with 64 KB of flash program memory and 16,384 words of RAM, housed in a 64-pin QFN with exposed pad (MR) package rated for -40C to +125C extended temperature operation. A digital signal controller combines the deterministic interrupt response and peripheral set of a microcontroller with the multiply-accumulate computational throughput of a DSP. In the power-management hierarchy of embedded systems, a DSC sits between a general-purpose MCU and a dedicated DSP: it executes real-time control loops, such as field-oriented control of motors, while managing communication, sensing, and system supervision on the same silicon. Key features include the 16-bit dsPIC33F core with DSP instruction extensions, an on-chip CAN 2.0B controller for industrial networking, motor-control PWM peripherals capable of complementary outputs with dead-time insertion, and advanced analog integration for sensing. The dsPIC33FJ64MC706A family is explicitly optimized for motor control applications by Microchip, covering brushless DC, single- and 3-phase induction, and switched reluctance motor architectures. Technically, the device executes up to 40 million instructions per second at 3.0V to 3.6V operation, with a 24-bit instruction word architecture. Seamless migration paths exist to PIC24 MCU and dsPIC30F DSC devices in similar packages, protecting software investment. The extended -40C to +125C E-temperature suffix suits industrial enclosures, traction cabinets, and under-hood-adjacent electronics where ambient temperatures exceed commercial ratings. Typical applications include brushless DC motor drives, 3-phase induction motor inverters, uninterruptible power supplies (UPS), switched reluctance motor controllers, and power-factor-correction stages where the PWM engine, ADC, and CAN bus operate in a coordinated real-time loop. A key design consideration is supply integrity: the QFN exposed pad must be soldered to a solid ground plane, and decoupling capacitors placed directly at each VDD/VSS pair to support the 40 MHz switching currents during simultaneous PWM edge transitions. This page synthesizes distributor pricing, drop-in same-package alternatives, pinout guidance, and practical design notes not consolidated in the manufacturer datasheet.

詢價 聯絡我們
DSPIC33FJ64MC706AT-I/MR - 16-bit 40 MIPS DSC 64KB | Microchip
DSPIC33FJ64MC706AT-I/MR

DSPIC33FJ64MC706AT-I/MR - 16-bit 40 MIPS DSC 64KB | Microchip

The Microchip Technology DSPIC33FJ64MC706AT-I/MR is a 16-bit dsPIC33F digital signal controller (DSC) delivering up to 40 MIPS performance with 64KB (64K x 8) of Flash program memory, housed in a 64-pin VQFN (9x9 mm) package with exposed pad. It operates from a 3V to 3.6V supply and integrates MCU control with DSP capability in a single core. A digital signal controller combines the deterministic control of a microcontroller with the mathematical throughput of a DSP. In the embedded hierarchy, the dsPIC33F sits between general-purpose MCUs (such as the PIC18 family) and dedicated DSPs, making it a power management IC-class solution for real-time closed-loop systems that need both fast multiply-accumulate operations and rich peripherals. Key features include 40 MIPS maximum core speed, 64KB self-programming Flash, 53 general-purpose I/O pins, and communication peripherals including ECAN, I2C, SPI, and UART as listed by distributor Newark. The device supports industrial temperature operation (-40C to +85C, denoted by the I suffix) and ships in tape-and-reel packaging (T/R) for automated assembly. Architecturally, the dsPIC33F core pairs a 16-bit modified Harvard CPU with DSP engine instructions, enabling single-cycle MAC operations used in field-oriented motor control, digital power conversion, and filtering. The A-version family devices are Microchip's refreshed silicon of the dsPIC33FJ64MC706 line. Typical applications include brushless DC motor control, single- and 3-phase induction motor drives, and switched reluctance motor systems, as stated by Microchip on the dsPIC33FJ64MC706A product page, plus digital power supplies and industrial sensing nodes. Design consideration: the 64-VQFN exposed-pad package requires a well-designed ground via array under the thermal pad to achieve reliable solder joints and low-impedance grounding at 40 MIPS switching activity. This page synthesizes distributor pricing, drop-in family alternatives, design notes, and application guidance not consolidated in the manufacturer datasheet.

詢價 聯絡我們
DSPIC33FJ64MC706AT-I/PT - 16-bit 40MIPS DSC 64KB Flash | Microchip
DSPIC33FJ64MC706AT-I/PT

DSPIC33FJ64MC706AT-I/PT - 16-bit 40MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC706AT-I/PT is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance with 64KB (64K x 8) of Flash program memory and 16KB of RAM, housed in a 64-pin TQFP (10x10 mm) package. A digital signal controller combines the computational architecture of a DSP with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, the DSC sits between general-purpose MCUs and dedicated DSPs: it executes deterministic control loops (such as field-oriented motor control) while simultaneously handling communication, timing, and analog acquisition tasks on a single chip. The dsPIC33F family from Microchip Technology is a widely adopted 16-bit DSC platform for these mixed control-plus-connectivity designs. Key features of this device include the 40 MIPS dsPIC33F core with DSP engine and barrel shifter, 16KB of on-chip SRAM, 8-channel DMA controller, and 11 timers. Analog capability is provided by a 16-channel, 10-bit/12-bit ADC supporting high-rate simultaneous sampling - essential for current and voltage sensing in motor drives. Five external interrupt sources and multiple serial ports round out the I/O capability. The MC706 variant belongs to the motor-control (MC) subfamily, which integrates motor-control PWM peripherals suited to inverter and converter control. The CMOS process with low-power modes (Idle and Sleep) allows battery-powered and thermally constrained designs to reduce average current draw while retaining fast wake-up for real-time control loops. Typical applications include three-phase motor control (BLDC, PMSM, AC induction), digital power supplies and solar inverters, and industrial automation nodes that need deterministic control loops alongside serial communication. The 3.0V to 3.6V supply range matches standard 3.3V industrial rails. When designing with this device, budget the 16KB RAM carefully - control-loop state, DMA buffers, and communication stacks must share it; larger buffer requirements may favor the 128KB Flash variants of the same package. The industrial temperature rating (-40C to +85C) and RoHS3 compliance simplify qualification for factory environments. This page synthesizes distributor pricing, drop-in same-package alternatives, design notes, and application guidance not consolidated in the manufacturer datasheet.

詢價 聯絡我們
DSPIC33FJ64MC706T-I/PT - 16-bit DSC, 40 MIPs, 64KB Flash | Microchip
DSPIC33FJ64MC706T-I/PT

DSPIC33FJ64MC706T-I/PT - 16-bit DSC, 40 MIPs, 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC706T-I/PT is a 16-bit digital signal controller (DSC) delivering 40 MIPs of performance, 64KB (64K x 8) of Flash program memory, and 69 I/O, housed in a 64-pin TQFP (10x10 mm) surface-mount package rated from -40C to +85C. A digital signal controller combines the deterministic control flow of a microcontroller with the multiply-accumulate (MAC) hardware of a DSP core. In the power-management hierarchy, the dsPIC33F family sits between general-purpose 16-bit MCUs (such as the PIC24) and standalone DSPs, offering a single-chip solution for control loops that must execute fast math while managing peripherals, communication, and I/O. Key features include the 16-bit dsPIC33F core with DSP engine (40-bit accumulators, dual 16-bit working registers), 64KB Flash and 8KB SRAM, an internal fast RC oscillator with PLL allowing 40 MIPS operation without an external crystal, and industrial temperature coverage (-40C to +85C). The supply range is 3.0V to 3.6V (3.3V nominal), and the part is lead-free and RoHS-compliant per distributor listings. The MC706 variant of the dsPIC33FJ64MC family is optimized for motor control and digital power, integrating peripherals such as PWM modules, high-speed ADCs, and communication interfaces (UART, SPI, I2C, ECAN per family datasheet) that allow field-oriented control (FOC) and digital power loops to be executed at 40 MIPS with headroom. Typical applications include three-phase motor drives (BLDC, PMSM, ACIM), switch-mode power supplies and digital power conversion, power inverters and UPS systems, and sensor signal processing in industrial automation. The 69 available I/O on the 64-TQFP gives enough parallel interface capability for displays, keyboards, and companion ICs. Design consideration: the 3.0V to 3.6V supply window means this DSC is not 5V tolerant across all pins by default - verify per-pin tolerances in the manufacturer datasheet and add proper decoupling (multiple 0.1uF ceramics plus bulk capacitance) at each VDD/VSS pair. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and engineering design notes not found in the standard manufacturer datasheet, as of 2026-09-27.

詢價 聯絡我們
DSPIC33FJ64MC710A-E/PT - 16-bit 40MIPS DSC 64KB Flash | Microchip
DSPIC33FJ64MC710A-E/PT

DSPIC33FJ64MC710A-E/PT - 16-bit 40MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC710A-E/PT is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance with 64KB (64K x 8) of FLASH program memory, 16KB of RAM, and 85 general-purpose I/O pins in a 100-pin TQFP (12x12 mm) package. It operates from a 3V to 3.6V supply and across the extended automotive temperature range of -40C to +125C. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and ease of use of a microcontroller, sitting within the power-management and motor-control hierarchy of embedded processors. The dsPIC33F family merges a 16-bit modified Harvard architecture with DSP engine instructions, making it a middle tier between general-purpose MCUs and standalone DSPs. Key features include the 24-channel 10-bit/12-bit ADC capable of simultaneous multi-channel sampling, the Motor Control PWM (MCPWM) module with complementary outputs and dead-time insertion, multiple UART, SPI, and I2C communication ports, and AEC-Q100 automotive qualification signified by the -E temperature suffix. Architecturally, the dsPIC33F core executes most instructions in a single cycle at up to 40 MIPS, with hardware multiply, divide, and barrel shifter supporting control-loop mathematics such as field-oriented control (FOC). The A-silicon revision improves errata over the original dsPIC33FJ64MC710 die, and Microchip documents seamless migration paths to PIC24F/PIC24H MCUs and dsPIC30F DSCs in similar packages. Typical applications include brushless DC (BLDC) motor drives, single- and 3-phase induction motor control, switched reluctance motor systems, uninterruptible power supplies (UPS), power inverters, and digital power conversion, where fast ADC sampling synchronized to the PWM module is essential. When designing with this DSC, pair the PWM dead-time settings with gate-driver propagation delays and verify ADC sampling windows against the switching frequency; the 3.0-3.6V supply range requires a dedicated LDO or buck regulator on 5V industrial buses. This page synthesizes distributor pricing, drop-in alternatives, lifecycle status, and practical design notes not found in the manufacturer datasheet, providing a single citable reference for engineers evaluating the dsPIC33FJ64MC710A-E/PT.

詢價 聯絡我們
DSPIC33FJ64MC710A-I/PF - 16-bit 40MIPS DSC 64KB Flash | Microchip
DSPIC33FJ64MC710A-I/PF

DSPIC33FJ64MC710A-I/PF - 16-bit 40MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC710A-I/PF is a 16-bit Digital Signal Controller (DSC) delivering 40 MIPS performance from 64KB of flash memory and 16KB of RAM, housed in a 100-pin TQFP (14x14 mm) package with industrial temperature rating (-40C to +85C) and AEC-Q100 automotive qualification. A Digital Signal Controller combines the computational throughput of a DSP engine with the peripheral integration and deterministic interrupt architecture of a microcontroller. In the embedded systems hierarchy, the dsPIC33F family sits between general-purpose MCUs (such as the PIC24) and standalone DSPs, offering a single-chip solution that executes both C-based control code and math-intensive loops such as PID and field-oriented control. Key features include a modified Harvard architecture with a 16-bit RISC core, 40 MHz maximum operating frequency (40 MIPS), dedicated DSP engine with 17-bit x 17-bit single-cycle MAC, two 40-bit accumulators, and seamless migration options to PIC24F, PIC24H MCUs and dsPIC30F DSCs in similar packages. The A revision (suffix A) adds enhanced peripherals and improved electrical characteristics over the original dsPIC33FJ64MC710. Technical depth: the device integrates motor-control-oriented peripherals including a motor control PWM module with complementary outputs and dead-time control, multiple UART, SPI and I2C ports, a CAN 2.0B controller, a high-speed 10-bit ADC capable of simultaneous multi-channel sampling, and an internal fast RC oscillator for crystal-less operation. Operating supply range is 3V to 3.6V (3.3V nominal). Typical applications include brushless DC (BLDC) motor control, single and 3-phase induction motor drives, switched reluctance motor control, uninterruptible power supplies (UPS), and digital power conversion where the CAN bus supports automotive and industrial networking. Design consideration: at 40 MIPS, ensure adequate decoupling on every VDD/VSS pair and route the PWM outputs with dead-time margins verified against gate driver propagation delays. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們