EP1C12F256C8N
EP1C12F256C8N - Cyclone FPGA, 12,060 LEs, 256-BGA | Intel/Altera
The Intel (formerly Altera) EP1C12F256C8N is a member of the first-generation Cyclone family of field-programmable gate arrays, fabricated on a 1.5-V, 0.13-µm, all-layer copper SRAM process. The device integrates 12,060 logic elements (LEs), 239,616 bits of embedded RAM organized in 52 M4K blocks, 185 user I/Os, and 2 PLLs inside a 256-ball FineLine BGA (FBGA) package. The speed grade is C8 (commercial, -8 speed), and the trailing N denotes a lead-free / Pb-free finish.
A Cyclone FPGA is a SRAM-based, look-up-table (LUT) based programmable logic device that lets designers implement arbitrary digital logic, state machines, glue logic, and soft-processor cores (such as the Nios II) without custom silicon. Within the broader hierarchy, an FPGA belongs to programmable logic devices (PLDs), then to logic ICs, then to integrated circuits; the Cyclone family is Intel/Altera's low-cost, high-volume FPGA line, sitting below the Stratix high-performance family and above the MAX CPLD line. Cyclone devices are designed for cost-sensitive, high-volume applications such as digital signal processing front-ends, industrial control, and display interfaces.
Key features of the EP1C12F256C8N include up to 12,060 LEs for combinational and sequential logic, 239,616 bits of true dual-port or simple dual-port RAM (52 M4K blocks of 4,608 bits each), a single 1.5-V core supply with on-chip voltage regulation, and 2 PLLs providing clock multiplication, phase shifting, and skew management. The device supports LVDS I/O on selected banks and offers typical internal clock speeds up to 275 MHz in this speed grade, with rich DSP support through dedicated multiplier blocks when paired with logic.
The architecture centers on LABs (Logic Array Blocks) of 10 LEs each, interconnected by a multi-level routing fabric. Embedded M4K memory blocks allow efficient buffering, FIFO, and shift-register implementation without consuming logic resources. Configuration is loaded from a serial or parallel EPCS / EPC flash memory, and the device is reprogrammable in-system via JTAG or Active Serial / Active Parallel interfaces.
Typical applications include industrial motor control and machine vision, consumer display controllers (LCD/DVI/HDMI bridges), telecom line cards, automotive infotainment pre-production, and cost-sensitive DSP front ends. The 256-ball FBGA package supports high pin-count designs while remaining compatible with standard 1.0 mm pitch BGA PCB assembly.
When designing with this part, engineers should plan power sequencing (1.5-V core, separate PLL analog supply, and I/O bank supplies), thermal management (low-power 0.13-µm process keeps TJA modest), and a configuration scheme that survives field updates. Engineers should also verify Quartus II version compatibility, since older Cyclone devices require legacy Quartus releases for synthesis, fitting, and bitstream generation.
This page synthesizes distributor pricing, drop-in same-family variants, and practical design notes that are not collated in the original Altera Cyclone Family Data Sheet alone.
詢價
聯絡我們