EP20K1000CF672I9
EP20K1000CF672I9 - APEX 20KC 1M-Gate FPGA, 672-BGA | Intel
The Intel EP20K1000CF672I9 is a member of the APEX 20KC family of high-density SRAM-based FPGAs, integrating 1,000,000 system gates and 38,400 logic elements in a 672-ball FineLine BGA (FC-FBGA) package. The device is built on a 0.15 µm CMOS process, operates from a 1.71 V to 1.89 V core supply with a 1.8 V nominal, and supports up to 508 user I/O plus 4 dedicated inputs, making it one of the largest APEX 20KC variants available.
An FPGA (Field-Programmable Gate Array) is a reprogrammable logic device in the programmable-logic IC hierarchy, sitting between complex PLDs and full custom ASICs. The APEX 20KC family combines Look-Up-Table (LUT)-based logic, embedded system blocks (ESBs) for memory and product-term logic, and a continuous, SRAM-based interconnect fabric, allowing designers to implement glue logic, datapath, memory, and bus interfaces on a single device. Positioned between CPLDs and structured ASICs, APEX 20KC was used in networking, telecom, and DSP-heavy designs of its era.
Key features of the EP20K1000CF672I9 include 1,000,000 typical gates, 38,400 logic cells, 250 MHz internal performance, embedded array blocks for distributed RAM and ROM, and MultiVolt I/O support for interfacing with 1.8 V, 2.5 V, 3.3 V, and 5.0 V logic. The 'I' speed grade and industrial temperature suffix (-40 °C to +85 °C) suit industrial embedded applications. The 672-ball FineLine BGA package provides high board density and ample signal breakout for the 508 I/O count.
Architecturally, the device uses a four-level hierarchical interconnect (MegaLAB, LAB, ESB, LE) with dedicated carry chains and cascade paths for arithmetic and high-speed datapath operations. Each embedded system block can be configured as a dual-port RAM, FIFO, or CAM, providing up to 540 Kibits of embedded memory without consuming logic resources. The 0.15 µm CMOS process was Intel's high-density node for APEX generation devices.
Typical applications include high-speed data-path bridging, telecom backplane interfaces, DSP co-processing cards, industrial control boards, and ASIC prototyping. The high logic capacity and embedded memory make it suitable for multi-channel protocol converters, RAID controllers, and legacy networking line-card designs where pin compatibility with the APEX 20K family is required.
When designing with the EP20K1000CF672I9, plan for multi-rail power sequencing (1.8 V core plus I/O banks), provide a JTAG header for in-system programming, and follow Altera AN-114 (Guidelines for APEX 20K Board Layout) for BGA escape and decoupling. The 672-ball FC-FBGA requires a 4-6 layer PCB with microvia or via-in-pad fan-out to maintain signal integrity at high toggle rates.
This page synthesizes distributor pricing, APEX 20KC drop-in alternatives from the same family, and practical board-layout guidance not aggregated on a single manufacturer page, helping engineers source and integrate this legacy FPGA quickly.
詢價
聯絡我們