EP2AGZ300FH29C3N
EP2AGZ300FH29C3N - Arria II GZ FPGA, 298K LE, 780-FCBGA | Intel
The Intel (formerly Altera) EP2AGZ300FH29C3N is a high-density Arria II GZ Field Programmable Gate Array (FPGA) integrating 298,000 logic elements, 18,854,912 bits of embedded memory, and 281 user I/O pins in a 780-ball FineLine BGA (FCBGA) package. It is built on a TSMC 40 nm low-power process and operates with a core voltage of 0.9 V, targeting mid- to high-end ASIC prototyping, high-speed serial bridging, and digital signal processing applications.
An FPGA (Field Programmable Gate Array) is a reconfigurable integrated circuit whose logic fabric, block RAM, DSP blocks, and I/O serdes can be programmed by the designer after manufacture. Within the broader semiconductor taxonomy, FPGAs sit between general-purpose microcontrollers and fixed-function ASICs: more flexible than an ASIC, but more deterministic and parallel than a CPU. The Arria II GZ family is Intel's mid-range, transceiver-rich family optimized for applications that need 6.375 Gbps transceivers, moderate logic density, and hardened memory/DSP blocks without paying Stratix-class cost.
Key features include 11,920 Logic Array Blocks (LABs), up to 16 global clock networks, 8 PLLs, 736 embedded multipliers (18x18), and 12 transceiver channels capable of up to 6.375 Gbps data rate. The device also provides partial reconfiguration support and a hard PCI Express Gen2 IP block, simplifying high-bandwidth serial interface integration. The 780-pin FCBGA package offers an exposed die pad for thermal dissipation, supporting industrial-grade thermal envelopes.
Architecturally, the EP2AGZ300FH29C3N is implemented in a 40 nm CMOS process with embedded SRAM, hard PCML transceivers, and dedicated memory interface circuitry for DDR3 SDRAM. The -3 speed grade denotes the fastest available timing closure for this device, and the 'C' suffix indicates the commercial temperature range (0 C to +85 C), while 'N' denotes lead-free / RoHS compliance. The 'I' temperature grade (-40 C to +100 C) and 'I4' / 'I3' speed options are also available in the same 780-FCBGA footprint, enabling system designers to migrate performance tiers without re-spinning the PCB.
Typical applications include high-speed serial interface bridging (PCIe Gen2, SATA, SRIO), broadcast and professional video processing, radar and electronic warfare baseband, software-defined radio (SDR) front-end preprocessing, and ASIC prototyping. The combination of high logic density, embedded transceivers up to 6.375 Gbps, and DDR3 memory controller hard IP makes the EP2AGZ300FH29C3N well-suited for data aggregation and protocol conversion cards in telecom and industrial imaging systems.
When designing with this device, ensure the PCB land pattern follows Intel's 780-FCBGA (29 mm x 29 mm, 1.0 mm ball pitch) footprint and that the transceiver reference clock jitter meets the data-rate requirement. Power estimation should be done with the Intel Early Power Estimator (EPE) tool, because at full transceiver utilization the core and IO rails together can draw tens of watts. JTAG, AS, and PS configuration schemes are all supported; choose configuration mode based on board boot-time targets.
This page synthesizes distributor pricing, package-level drop-in alternatives within the Arria II GZ family, and practical design notes not found in the manufacturer datasheet alone.
詢價
聯絡我們