產品(46,000+)

MAX1179AEUI+ - 16-Bit 135ksps Bipolar SAR ADC | Analog Devices
MAX1179AEUI+

MAX1179AEUI+ - 16-Bit 135ksps Bipolar SAR ADC | Analog Devices

The Analog Devices (formerly Maxim Integrated) MAX1179AEUI+ is a 16-bit, 135ksps, low-power, single-supply successive-approximation analog-to-digital converter (SAR ADC) with a true bipolar analog input range of ±5V (or 0 to +5V unipolar via internal reference), housed in a 28-pin TSSOP package. The converter combines a high-speed 135ksps sample rate with 16-bit resolution and low power dissipation, making it ideal for industrial process control, data acquisition, and instrumentation front-ends that must digitize bipolar sensor signals without external signal conditioning. A SAR (Successive Approximation Register) ADC is a precision data converter that performs a binary-search conversion on an internal capacitive DAC, producing a digital code that converges to the input voltage in N clock cycles for an N-bit converter. Within the broader product hierarchy, the MAX1179 sits as a precision ADC -> data converter -> signal chain IC -> mixed-signal semiconductor, and is differentiated from sigma-delta and pipeline ADCs by its single-shot latency (one conversion per trigger, no pipeline delay) and intrinsic ease of single-supply bipolar operation. Key features of the MAX1179AEUI+ include an internal 4.096V reference, an external reference option, a single-ended analog input, a parallel (16-bit wide) digital interface, and a hardware-/software-configurable input range. The device supports both unipolar (0 to +5V) and bipolar (-5V to +5V) input spans, with a single +4.2V analog supply and a +2.7V to +5.25V digital supply. A separate 50MHz conversion clock or external crystal is not required; the on-chip oscillator drives the SAR state machine. The TSSOP-28 package provides a small footprint suitable for high-density data-acquisition boards. The MAX1179 architecture uses a charge-redistribution capacitive DAC followed by a low-noise comparator and SAR logic. By accepting ±5V true bipolar inputs on a single 4.2V analog supply, the part eliminates the need for external level-shift or negative-rail circuitry that would otherwise be required to digitize AC sensor outputs, thermocouple or strain-gauge bridge signals, or industrial ±10V (after resistor divider) transducer outputs. Typical applications include industrial data-acquisition front-ends, PLC analog input modules, multi-channel instrumentation panels, weigh scales and load-cell digitizers, and motor-control feedback loops where a high-accuracy 16-bit conversion with simultaneous sampling of a bipolar transducer is required. When designing with this device, decouple AVDD and DVDD with 0.1µF and 10µF ceramic capacitors placed within 2mm of each supply pin, and route analog and digital grounds to a single-point star ground under the exposed pad to prevent digital return currents from corrupting the input signal. The reference bypass capacitor is critical: 4.7µF minimum directly on REF. This page synthesizes distributor pricing, drop-in alternatives from the MAX1179 family, and practical design notes not collated in the manufacturer datasheet, helping engineers shorten the selection-to-prototype cycle for 16-bit bipolar ADC designs.

詢價 聯絡我們
MAX1179AEUI+T - 16-Bit 135ksps Bipolar-Input SAR ADC | Maxim Integrated
MAX1179AEUI+T

MAX1179AEUI+T - 16-Bit 135ksps Bipolar-Input SAR ADC | Maxim Integrated

The Analog Devices (formerly Maxim Integrated) MAX1179AEUI+T is a 16-bit, 135 ksps, successive-approximation analog-to-digital converter (ADC) with a bipolar ±5 V analog input range, housed in a 28-pin TSSOP package. The single-supply 4.2V-to-5.25V device integrates an input signal-conditioning true-differential track-and-hold, an on-chip 4.096V reference, and a parallel digital interface, simplifying front-end design in industrial process control and instrumentation. A successive-approximation register (SAR) ADC is a class of Nyquist-rate data converter that performs a binary search through an internal capacitive DAC to converge on the input voltage one bit per conversion clock cycle. SAR ADCs are prized for their deterministic latency, inherent single-shot accuracy with no pipeline delay, and excellent DC linearity, which makes them the architecture of choice for multiplexed data-acquisition systems, motor control current sensing, and precision instrumentation. Key features include 135 ksps throughput, ±5 V (10 V p-p) true-bipolar analog input range from a single 5 V supply, ±18 V fault-tolerant analog inputs, 16-bit no-missing-codes performance, internal 4.096 V reference, software-configurable unipolar/bipolar input range, and a low 4.2 mA typical supply current. The internal reference eliminates an external precision reference and the associated drift budget. The MAX1179 uses an input track-and-hold followed by a charge-redistribution SAR core. The 135 ksps rate is sufficient for many multiplexed industrial loops, while the parallel interface minimizes host CPU overhead. Analog Devices' process and proprietary input-protection network enable ±18 V input survival without external clamping. Typical uses include industrial process control (4-20 mA loop digitization through a sense resistor), multichannel data-acquisition boards, portable or battery-powered medical instruments, and system-monitoring functions inside +24 V factory-automation equipment. When designing with this device, place a 0.1 µF bypass ceramic capacitor close to the supply pad, keep analog and digital grounds joined at a single point, and verify that the host parallel bus timing meets the tCONV and tACQ windows given in the manufacturer datasheet. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found on a single manufacturer page.

詢價 聯絡我們
MAX1179BCUI+ - 16-Bit 135ksps Bipolar ADC | Maxim Integrated
MAX1179BCUI+

MAX1179BCUI+ - 16-Bit 135ksps Bipolar ADC | Maxim Integrated

The Maxim Integrated MAX1179BCUI+ is a 16-bit, 135ksps, single-supply successive-approximation analog-to-digital converter (SAR ADC) with a true bipolar analog input range, housed in a 28-pin TSSOP package. It operates from a single +5V analog supply, draws only 2.5mA in normal operation, and includes automatic power-down between conversions. An SAR ADC is a type of analog-to-digital converter that uses a successive-approximation register to perform binary search on the input voltage. SAR converters occupy the niche between slow, high-resolution sigma-delta ADCs (used for precision DC measurements) and fast, lower-resolution flash ADCs (used in oscilloscopes). Within the broader signal-chain hierarchy they sit alongside sample-and-hold amplifiers, input multiplexers, and voltage references; the part family here belongs to Maxim's data-conversion portfolio (ADC -> data converter -> mixed-signal IC -> semiconductor). Key features include a true bipolar ±12V (or 0 to +12V, user-selectable) input range without external signal conditioning, integrated track-and-hold, factory-trimmed internal clock, and a 16-bit parallel interface. The bipolar capability eliminates the front-end op-amp/inverter chain typically required to digitize signals centered around ground, simplifying industrial process-control and instrumentation designs. Internally, the device combines a capacitive-charge-distribution DAC with auto-calibration logic. Factory trimming removes offset and gain error at production, achieving ±1.5 LSB INL and ±1 LSB DNL typical, plus 86dB SINAD at 100kHz. The architecture supports single-shot conversions via the CONVST pin and offers throughput scalable down to 1ksps with proportional power savings (90 microamps at 1ksps). Typical applications include industrial process control (4-20mA loop digitization through a sense resistor), data-acquisition boards, pen plotters, and portable instrumentation. The bipolar input makes the MAX1179BCUI+ especially attractive in PLCs and motor-control feedback paths where signals swing around 0V. Design consideration: drive AIN through a low-impedance source (op-amp buffer or instrumentation amp) because the ADC's input draws 1 microamp of leakage and the input capacitance settles in microseconds; a 10kohm source impedance limits 16-bit settling. Provide a clean AGND and DGND split, joined only at one point near the ADC. This page synthesizes distributor pricing, parametric comparison against same-family Maxim variants, drop-in alternative guidance, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
MAX1179CCUI+T - 16-Bit 135ksps Bipolar SAR ADC | Maxim Integrated
MAX1179CCUI+T

MAX1179CCUI+T - 16-Bit 135ksps Bipolar SAR ADC | Maxim Integrated

The Maxim Integrated MAX1179CCUI+T is a 16-bit, 135ksps, low-power, successive-approximation register (SAR) analog-to-digital converter (ADC) with a true bipolar analog input range, housed in a 28-pin TSSOP (4.40mm body width) package. It operates from a single +4.2V (nominal +5V) supply, accepts input spans from -5V to +5V, and integrates automatic power-down, a factory-trimmed internal clock, and a track-and-hold front-end. An SAR ADC is a type of data converter that performs a binary-search analog-to-digital conversion using a capacitive charge-redistribution DAC and a single comparator, achieving deterministic latency and excellent DC accuracy without the pipeline delay or switching-ripple artifacts common to delta-sigma and pipeline ADCs. SAR ADCs sit within the broader analog-to-digital converter hierarchy (SAR -> ADC -> data converter -> mixed-signal IC -> semiconductor) and are favored for multiplexed acquisition, industrial control loops, and portable instrumentation because each conversion completes in one acquisition cycle. Key features include ±5V bipolar input range on a single supply, throughput up to 135k samples per second, low power dissipation with automatic power-down between conversions, a serial interface for compact PCB routing, and a commercial 0°C to +70°C operating grade. The integrated track/hold and factory-trimmed internal clock eliminate several external components typical of older 16-bit SAR designs, simplifying BOM and shrinking the analog front-end footprint. The MAX1179 architecture uses a charge-redistribution DAC array and a precision comparator controlled by successive-approximation logic, yielding ±1 LSB INL (max) and no missing codes over the full 16-bit range. Bipolar input conditioning is handled by an on-chip input scaling network that derives ±5V range from the +5V supply rail without a negative supply, a meaningful simplification over legacy bipolar ADCs that required ±12V rails. Typical applications include process control and industrial data acquisition cards, portable instrumentation and weigh scales, motor control feedback loops, and medical patient-monitoring front-ends. The bipolar input particularly suits PLC analog input modules that must read 4-20mA or ±10V process signals directly. When designing with this part, place the 0.1µF decoupling capacitor within 5mm of the AVDD pin and provide a solid ground pour under the package to keep the track/hold acquisition clean. Avoid routing the serial interface traces parallel to noisy digital lines; this ADC samples at sub-microsecond rates and is sensitive to digital-to-analog coupling. This page synthesizes manufacturer datasheet excerpts, distributor pricing, drop-in compatible variants from the MAX1179/MAX1187/MAX1189 family, and practical design notes not aggregated on any single distributor page.

詢價 聯絡我們
MAX117CAI+ - 8-Channel 8-Bit 400ksps ADC | Maxim
MAX117CAI+

MAX117CAI+ - 8-Channel 8-Bit 400ksps ADC | Maxim

The Maxim Integrated MAX117CAI+ is an 8-channel, 8-bit, microprocessor-compatible flash analog-to-digital converter with a 400 ksps conversion rate, 1.8 µs conversion time, and operation from a single +3 V supply. The device is housed in a 28-pin SSOP package and features eight single-ended analog inputs, a parallel output interface, and a low-power shutdown function. A flash ADC is a sampling data-conversion IC that compares its analog input against an internal reference ladder and directly produces a digital output. The MAX117 belongs to the ADC category within data-converter ICs and broader semiconductor hierarchy. Its parallel architecture allows a microprocessor or digital controller to read each conversion result directly, making it useful for multichannel industrial monitoring, control, instrumentation, and embedded systems where several relatively slow sensor signals must be digitized. The MAX117CAI+ converts at 400 ksps and uses a half-flash technique to achieve a 1.8 µs conversion time. Its PWRDN input reduces supply current to 1 µA typical for low-duty-cycle or portable equipment. A logic high on PWRDN wakes the converter to normal operation in less than 900 ns. The input and reference arrangement supports ratiometric operation, in which the converter follows the ratio between the measured input and its reference voltage. Eight single-ended inputs provide the device with a practical advantage over single-channel ADCs in multichannel systems. Parallel output reduces the number of serial-clock cycles required after conversion, although it requires more connection paths between the ADC and the controller. The 28-pin SSOP package is suitable for through-hole assembly and is substantially larger than modern leadless packages, making board area an important design consideration. Typical applications include temperature and pressure monitoring, industrial process control, battery-cell measurement, discrete sensor acquisition, laboratory instrumentation, and embedded control systems. For designs requiring higher resolution, more channels, or a more compact package, the MAX113/MAX117 family should be checked for the appropriate channel count and package variant. Design around the specified +3 V supply, external reference behavior, conversion timing, and parallel data interface. Decoupling should be placed close to the supply and reference pins, while unused inputs and control pins should be connected according to the manufacturer pin-description table. Input signals must remain within the device's specified analog input range. This product page consolidates the converter's core specifications, package information, application guidance, design considerations, and the documented drop-in option into an engineering-focused reference. It also distinguishes the MAX117CAI+ from the closely related MAX117CAI+T ordering code so procurement teams can identify the correct manufacturer suffix.

詢價 聯絡我們
MAX117CPI - 8-Channel 8-Bit 400ksps ADC | Analog Devices
MAX117CPI

MAX117CPI - 8-Channel 8-Bit 400ksps ADC | Analog Devices

The Analog Devices MAX117CPI is an 8-bit, 8-channel, microprocessor-compatible analog-to-digital converter with a 400 ksps conversion rate and a 28-pin through-hole DIP package. It operates from a single +3 V supply, uses half-flash conversion, and supports power-down operation. An ADC is a data-conversion IC that translates an analog input voltage into a digital code for processing, measurement, or control. The MAX117 belongs to the ADC hierarchy, where flash ADCs use parallel or semi-parallel internal comparison stages to support relatively high sampling rates. Its eight inputs make it useful when a system must monitor several analog signals through one converter rather than using a separate ADC for each channel. Key characteristics include 8-bit resolution, eight analog inputs, a maximum sampling rate of 400 ksps, and a conversion time of 1.8 microseconds. The MAX117CPI uses a +3 V supply, provides microprocessor-compatible interfacing, and includes a power-down function. These features suit compact control and measurement systems where low supply voltage, multiple inputs, and straightforward digital interfacing are more important than high-resolution conversion. The half-flash architecture provides a practical balance between conversion speed and implementation complexity. At 400 ksps, one conversion can nominally occupy 1.8 microseconds before software or hardware overhead is added. An 8-bit converter represents each analog input with one byte of digital data, which is appropriate for threshold monitoring, switch-position decoding, simple sensor measurement, and supervisory control functions where additional resolution would not materially improve the system result. Typical uses include industrial control panels, battery-operated instruments, digital thermometers, multichannel sensor interfaces, automotive accessory modules, and embedded monitoring systems. The eight inputs can support several resistive sensors, discrete thresholds, or mixed analog signals sharing a common measurement front end. The MAX117 is especially relevant where the host processor requires a simple parallel ADC interface rather than a serial data-conversion protocol. Designers should confirm signal-range compatibility, supply sequencing, acquisition timing, and input-signal settling before committing the eight analog channels to a board. Input conditioning may be required when sources exceed the converter's input range or drive the inputs too slowly for the selected sampling rate. Digital interface timing and reference behavior must also be checked against the manufacturer's pin-description table. This product page consolidates the converter's principal electrical characteristics, verified package information, drop-in family options, and application-oriented design guidance. It is intended to shorten component selection while keeping the final circuit decisions with the engineer and the manufacturer datasheet.

詢價 聯絡我們
MAX117EAI+ - 8-Bit 400 ksps ADC | Maxim Integrated
MAX117EAI+

MAX117EAI+ - 8-Bit 400 ksps ADC | Maxim Integrated

The Maxim Integrated MAX117EAI+ is a microprocessor-compatible 8-bit flash analog-to-digital converter with eight single-ended inputs, a 400 ksps conversion rate, and a 1.8 µs conversion time. It operates from a single 3 V supply and is housed in a 28-pin SSOP package. A low-power shutdown mode reduces supply current to 1 µA, making the converter suitable for portable and intermittently powered measurement systems. An analog-to-digital converter, or ADC, converts an analog voltage into a numeric code for processing by a microcontroller, logic circuit, or display controller. The MAX117EAI+ belongs to the flash-converter family of ADCs, combining a sampling architecture with parallel digital outputs. Eight channels allow one converter to monitor multiple sensors, potentiometer positions, or control signals while retaining a direct microprocessor interface. Key operating characteristics include an 8-bit resolution, eight analog inputs, and a maximum conversion rate of 400 ksps. The converter uses a half-flash technique to achieve its 1.8 µs conversion time. Its single 3 V supply operation simplifies power architecture, while the 1 µA shutdown current helps reduce energy use when the measurement system is inactive. The parallel output interface exposes the converted value to external digital circuitry and supports microprocessor-compatible system designs. The 28-pin SSOP package is suitable for through-hole assembly and conventional PCB layouts. Because resolution is 8 bits, each ideal conversion code represents one of 256 output levels, making the device appropriate for control, monitoring, and display applications that do not require higher precision. Typical uses include industrial sensor interfaces, digital potentiometer and potentiometer emulation, panel controls, process monitoring, and embedded control systems. Multiple analog channels can reduce the number of separate converter packages when several low-bandwidth measurements must be acquired. The 400 ksps rate is especially useful when the system needs to update several measured values rapidly. Designers should verify the analog input range, conversion timing, acquisition requirements, and digital interface timing in the manufacturer datasheet before finalizing the PCB. The supply and reference paths require appropriate bypassing, and unused analog inputs should be handled according to the device guidance. The low-power shutdown function should be controlled so that settling and acquisition timing remain valid after wake-up. This product page combines the known operating specifications, package information, replacement guidance, and application-oriented design considerations for engineers evaluating the MAX117EAI+. It also distinguishes the directly documented family alternative from options that would require functional or layout verification before use.

詢價 聯絡我們
MAX117EPI - 8-Bit 4-Channel 400ksps ADC | Maxim Integrated
MAX117EPI

MAX117EPI - 8-Bit 4-Channel 400ksps ADC | Maxim Integrated

Maxim Integrated MAX117EPI is an 8-bit, four-channel flash-conversion analog-to-digital converter that supports 400ksps sampling from a single 3V supply. The MAX117EPI combines a 3.6V maximum supply rating, 1.8µs conversion time, and 1µA power-down operation in a 28-pin through-hole DIP package. It is the four-channel member of the MAX113/MAX117 microprocessor-compatible ADC family. An ADC is an interface IC that converts an analog voltage into a digital code for measurement, control, or display systems. The MAX117EPI belongs to the hierarchy ADC, data-converter IC, interface IC, and semiconductor. Its four inputs allow a microcontroller or microprocessor to monitor several sensors or control signals without operating four separate converter packages. The flash-conversion architecture supports successive approximation-style acquisition while avoiding the latency of a continuous ramp converter. Key characteristics include 8-bit resolution, four analog input channels, a 400ksps conversion rate, and operation from a single 3V supply. The half-flash conversion technique produces a 1.8µs conversion time, making the converter suitable for rapidly changing control signals. A 1µA power-down mode reduces consumption when measurements are intermittent, while the processor-compatible interface supports integration with embedded control systems. The device is specified as an 8-bit ADC with four channels and a 400ksps throughput rate. Its input architecture and converter throughput are intended for industrial monitoring, digital panel meters, process-control loops, and embedded data acquisition. Because it accepts several analog signals, it can reduce component count and simplify routing on a board that must monitor multiple transducers or potentiometer positions. Package and environmental details distinguish this industrial-grade, through-hole ordering code. The MAX117EPI is packaged in a rectangular 28-pin DIP and is identified as industrial temperature grade. Its 762mW maximum power dissipation and single-supply architecture make it most appropriate for conventional 3V embedded systems rather than ultra-low-power battery products. Use the manufacturer datasheet pin-description table when assigning analog inputs, reference connections, digital outputs, and control pins on the 28-pin DIP. Confirm the input-voltage range, reference configuration, acquisition timing, and absolute maximum ratings against the specific operating conditions. Place suitable bypass capacitance near the supply and reference pins, and route analog inputs away from fast digital switching nodes. This page combines the device specifications, package information, practical application guidance, verified lifecycle listings, and drop-in replacement analysis. It also identifies the electrical and pin-level checks required before substituting an ADC, helping engineers compare converters without treating superficially similar resolution and sampling specifications as proof of board-level compatibility.

詢價 聯絡我們
MAX118CAI+ - 8-Channel 8-Bit 1Msps ADC | Maxim Integrated
MAX118CAI+

MAX118CAI+ - 8-Channel 8-Bit 1Msps ADC | Maxim Integrated

The Maxim Integrated MAX118CAI+ is an 8-channel, 8-bit, microprocessor-compatible analog-to-digital converter operating from a single +5 V supply. It achieves a 1 Msps conversion rate using a half-flash conversion technique, with a conversion time of 660 ns, and is housed in a 28-pin SSOP package. The device provides eight single-ended analog inputs and a parallel output interface for direct connection to a microprocessor or other digital controller. Its active-low PWRDN control reduces supply current to typically 1 µA, while recovery from power-down mode occurs in less than 200 ns. An ADC is an analog-to-digital converter, a semiconductor interface that transforms continuously varying analog voltages into numerical values suitable for digital processing. The MAX118 belongs to the parallel-interface ADC family within the broader data-converter and signal-processing semiconductor hierarchy. It is intended for systems where multiple analog inputs must be measured quickly, but higher resolution is not required. The MAX118 family is particularly suitable for industrial monitoring, control systems, data acquisition, and embedded instrumentation where a parallel bus simplifies connection to a processor. The MAX118CAI+ combines a 1 Msps sampling rate with an 8-bit resolution, producing 256 possible output codes for each channel. Its half-flash architecture is designed to provide microprocessor-compatible operation and faster conversion than traditional successive-approximation converters of the same general class. The eight-channel arrangement allows one ADC package to monitor multiple sensors or control points, reducing component count and simplifying firmware addressing. Power management is an important feature of this converter. The active-low PWRDN pin allows the system to place the ADC into a low-current state when measurements are not required. Typical power-down current is 1 µA, and the device can resume normal operation in less than 200 ns. This combination supports portable and intermittently sampled equipment while limiting standby power consumption. Typical applications include process-control loops, factory automation, digital panel meters, data-acquisition systems, battery-operated instruments, and embedded control platforms. The 28-pin SSOP package is useful for designs requiring a through-hole-compatible surface-mount footprint and straightforward routing to a microprocessor bus. Designers should provide a stable +5 V supply, observe the manufacturer’s input-voltage limits, account for analog signal conditioning, and ensure that the parallel output timing is compatible with the host processor. This page combines the verified manufacturer and distributor information for MAX118CAI+ with package, application, comparison, and design guidance intended to support practical engineering selection.

詢價 聯絡我們
MAX118CPI+ - 8-Channel 8-Bit 1Msps ADC | Analog Devices
MAX118CPI+

MAX118CPI+ - 8-Channel 8-Bit 1Msps ADC | Analog Devices

The Analog Devices MAX118CPI+ is an 8-channel, 8-bit, microprocessor-compatible analog-to-digital converter with a 1 MSPS conversion rate, a single +5 V supply, and a 28-pin PDIP package. It uses a half-flash conversion architecture to achieve a stated conversion time of 660 ns, while an active-low power-down input reduces shutdown current to typically 1 µA. The parallel interface allows direct connection to an 8-bit microprocessor or digital bus. An ADC converts continuously varying analog voltages into numeric values that digital control systems can process. The MAX118 belongs to the data-converter hierarchy: analog-to-digital converter, ADC, data converter, and integrated circuit. Its eight single-ended inputs make it suitable for monitoring multiple sensors, control signals, or measurement channels without requiring eight separate converter packages. Its 8-bit resolution provides 256 digital codes across each input range. The principal features are eight single-ended inputs, 8-bit resolution, a 1 MSPS conversion rate, and a 660 ns half-flash conversion time. The converter operates from one +5 V supply, with the listed operating range extending from 4.75 V to 5.25 V. Its parallel output architecture supports microprocessor-compatible interfacing, while the active-low power-down function provides a low-current shutdown state. The 28-pin PDIP package supports conventional through-hole PCB assembly. The half-flash architecture forms the central technical basis of the converter. Rather than waiting for a complete conversion cycle before the next sample can begin, the architecture supports successive conversion operation at the stated 1 MSPS rate. This behavior is useful when several analog inputs must be refreshed quickly for control, display, or measurement functions. Signal conditioning, source impedance, and input-range selection still require attention because ADC performance depends on the complete analog path, not only the converter IC. Typical uses include industrial process monitoring, laboratory measurement, data logging, embedded instrumentation, and legacy control-system analog input modules. Eight channels can reduce the component count and board area when several slow or moderate-speed signals share a common sampling system. The MAX118CPI+ is also appropriate where an existing parallel-bus processor expects an 8-bit conversion result and a +5 V interface rather than a serial data link. For PCB implementation, reserve all 28 package positions and route the parallel data bus away from high-current switching nodes. Place the device close enough to the analog inputs to minimize trace pickup, and use suitable input conditioning when sensor outputs exceed the converter input range. Confirm signal levels, timing margins, and acquisition sequencing against the manufacturer pin-description and timing information before releasing the layout. This page combines the MAX118CPI+ electrical identity, procurement fields, comparison guidance, and engineering-oriented design notes in one searchable reference. It also distinguishes the confirmed 28-pin PDIP variant from unverified substitutes so engineers can focus on verified function, package, timing, power, and interface constraints.

詢價 聯絡我們
MAX118EAI+ - 8-Bit 8-Channel 1Msps ADC | Analog Devices
MAX118EAI+

MAX118EAI+ - 8-Bit 8-Channel 1Msps ADC | Analog Devices

Analog Devices MAX118EAI+ is an 8-bit, 8-channel, 1Msps flash analog-to-digital converter with a parallel interface, operating from a single +5V supply in a 28-SSOP package. It combines eight single-ended inputs with a 660ns half-flash conversion time, making it suitable for fast acquisition, control, instrumentation, and embedded measurement systems. A flash ADC is a parallel-input data converter that uses multiple internal comparators to convert an analog voltage into a digital code in one conversion cycle. The MAX118 family provides microprocessor-compatible 4-channel and 8-channel options for designers who need rapid sampling without the complexity of a serial data interface. Its 1µA power-down mode makes it especially useful when the acquisition circuit must remain available while consuming very little standby power. The MAX118EAI+ provides eight 8-bit conversion channels, a 1Msps conversion rate, an external reference, and an active-low power-down input. The parallel output arrangement can connect directly to a suitable microprocessor, microcontroller, FPGA, or input/output interface. The 28-SSOP package offers more input and control pins than small serial-interface ADC packages, making careful PCB planning important for signal routing and grounding. Its half-flash architecture supports a typical conversion time of 660ns, equivalent to a throughput of 1Msps. The eight-bit resolution provides 256 code levels per input, making the converter appropriate for position sensing, simple process monitoring, digital potentiometer feedback, industrial control, and embedded data acquisition. Conversion timing, input settling, reference stability, and the acquisition system’s bandwidth must be evaluated together when interpreting sampled results. Typical uses include industrial control panels, multichannel sensor interfaces, battery-powered monitoring equipment, laboratory measurement systems, and microcontroller-based instrumentation. The active-low power-down feature can disable the converter during idle periods and return it to normal operation in less than 200ns, according to the manufacturer’s MAX118 product page. Design the MAX118EAI+ around a low-impedance reference, short analog input paths, and a quiet return plane. Place input and reference decoupling close to the device, route digital output traces away from sensitive analog inputs, and account for logic levels when interfacing the parallel outputs to another digital component. The 28-SSOP footprint requires adequate routing space for eight channels and the associated digital signals. This product page combines manufacturer specifications, sourcing guidance, verified drop-in alternatives, and practical PCB considerations. The comparison and design guidance help engineers determine whether the MAX118EAI+ fits a specific acquisition architecture, interface voltage requirement, channel count, and standby-power budget.

詢價 聯絡我們
MAX118EPI+ - 8-Channel 8-Bit 1MSPS ADC | Maxim Integrated
MAX118EPI+

MAX118EPI+ - 8-Channel 8-Bit 1MSPS ADC | Maxim Integrated

The Maxim Integrated MAX118EPI+ is an 8-channel, 8-bit, 1MSPS parallel-output flash analog-to-digital converter housed in a 28-pin PDIP package. It operates from a single +5V supply, accepts eight analog inputs, and supports microprocessor-compatible data acquisition. Its half-flash conversion architecture achieves a 660ns conversion time, while active-low power-down reduces supply current typically to 1µA. An analog-to-digital converter, or ADC, converts continuously varying analog voltages into digital values for processing, measurement, or control. The MAX118 belongs to the parallel-interface ADC hierarchy within data-converter and mixed-signal semiconductors. Unlike serial-interface converters, its eight-bit digital result is presented through parallel output lines, allowing direct connection to compatible microprocessor, microcontroller, or logic interfaces without a serial protocol. The MAX118EPI+ provides one million conversions per second, an eight-bit resolution, and eight analog input channels. Its single +5V operation simplifies power-supply design in legacy and industrial equipment. The half-flash architecture is specifically intended to combine rapid conversion performance with microprocessor-compatible operation. An active-low power-down input permits the converter to remain at approximately 1µA when it is not needed and supports recovery to normal operation in less than 200ns. The MAX118 family is offered in four-channel and eight-channel versions. The MAX118EPI+ is the eight-channel industrial-grade version in a 28-pin PDIP package. Its through-hole package supports legacy control boards and systems assembled with socketed or perforated-board construction. The parallel architecture makes the device particularly relevant to older industrial controllers, data acquisition instruments, and embedded systems that use direct digital input lines rather than SPI, I2C, or other serial ADC interfaces. Typical uses include eight-channel sensor acquisition, process monitoring, laboratory measurement, industrial control, and legacy data logging. Eight analog channels can be sampled for temperature, pressure, position, or analog instrumentation signals, provided each signal remains within the device's supported input range and the system provides suitable conditioning. The 1MSPS conversion rate supports faster-changing events than a slow general-purpose system ADC while retaining a simple eight-bit parallel data path. Designers should verify the complete pinout, input ranges, acquisition timing, and digital interface behavior against the manufacturer datasheet before layout or firmware work. Analog signal routing should minimize noise and crosstalk, while adequate bypassing should be placed close to the supply pins. Because this is a legacy parallel-interface converter, replacement decisions must consider not only resolution, speed, and channel count but also exact pin compatibility, logic levels, and timing. This page combines manufacturer specifications, distributor pricing and availability data, same-family replacement information, and practical migration guidance. It distinguishes verified drop-in candidates from broader functional similarities so engineers can evaluate MAX118EPI+ replacements without confusing package compatibility with complete electrical equivalence.

詢價 聯絡我們
MAX11903ETP+T - 18-Bit 1.6Msps SAR ADC | Analog Devices
MAX11903ETP+T

MAX11903ETP+T - 18-Bit 1.6Msps SAR ADC | Analog Devices

The Analog Devices MAX11903ETP+T is an 18-bit, 1.6 Msps, single-channel, fully differential SAR analog-to-digital converter with internal reference buffers, offered in a 20-pin TQFN (4 mm x 4 mm) package. Key headline parameters include 18-bit resolution, 1.6 Msps maximum sampling rate, and a fully differential ±VREF input range. The device communicates via an SPI-compatible serial interface and is specified over the -40 °C to +85 °C industrial temperature range. A SAR (Successive-Approximation Register) ADC is a class of Nyquist-rate converter that resolves one bit per internal clock cycle using a capacitive charge-redistribution DAC and a comparator. SAR ADCs sit at the boundary between precision (sigma-delta) and high-speed (pipelined/folding) converters, combining low latency (one conversion cycle), deterministic behavior, and excellent DC accuracy without the digital decimation filters of sigma-delta parts. They are the workhorse for multiplexed data-acquisition systems, industrial sensors, and digital control loops where single-shot latency matters. The MAX11903ETP+T delivers best-in-class power consumption that scales linearly with throughput, meaning current draw at 100 ksps is roughly 1/16 of the current at 1.6 Msps. Internal reference buffers eliminate the need for external high-current reference drive circuitry, simplifying the BOM and reducing PCB area. The unipolar differential ±VREF input range allows direct interface to bridge sensors, current-shunt monitors, and differential audio signals after scaling. Internally, the device uses a 1.8 V analog core supply plus a 3.3 V reference-buffer supply; the split rail minimizes digital noise coupling into the sensitive analog front-end. An integrated high-impedance input structure accepts true bipolar differential signals when biased around a common-mode voltage, supporting direct connection to bridge sensors and instrumentation outputs. Typical applications include precision industrial data acquisition, weigh scales and load-cell digitizers, motor-control current sensing, medical instrumentation signal chains, and multi-channel multiplexed sensor systems. The serial SPI-compatible output and small TQFN footprint make it equally at home in dense multi-channel boards. When designing with this ADC, take care with the reference decoupling: place 10 µF ceramic + 0.1 µF NF bypass right at the REF pins and use a star-ground topology to keep digital return currents out of the analog ground. Input common-mode biasing matters - set IN+ and IN- around VREF/2 for maximum dynamic range on differential signals. This page synthesizes distributor pricing, drop-in alternatives drawn from the Site MPN list, and practical design notes that go beyond the manufacturer datasheet's electrical tables alone.

詢價 聯絡我們
MAX11905GTP+ - 20-Bit 1.6Msps Low-Power SAR ADC | Analog Devices
MAX11905GTP+

MAX11905GTP+ - 20-Bit 1.6Msps Low-Power SAR ADC | Analog Devices

The Analog Devices (formerly Maxim Integrated) MAX11905GTP+ is a 20-bit, 1.6 Msps, single-channel, fully differential SAR analog-to-digital converter with internal reference buffers, housed in a 20-pin TQFN (4x4 mm) package. It delivers best-in-class static and dynamic performance while consuming power that scales directly with throughput, making it the fastest and lowest-power 20-bit SAR ADC in its class. The device accepts a unipolar differential ±VREF input range and operates from a 3.3 V analog supply plus a 1.8 V digital supply. An SAR ADC (Successive Approximation Register analog-to-digital converter) is a precision data converter that uses a binary-search algorithm and an internal capacitive DAC to resolve an analog input voltage to N bits in N conversion cycles. SAR ADCs sit in the broader hierarchy of data converters (ADC/DAC) within mixed-signal ICs, and are prized for their deterministic latency, zero pipeline delay, and excellent DC accuracy, which makes them the dominant choice for precision instrumentation, industrial process control, and high-accuracy multi-channel data-acquisition systems. Key features include 1.6 Msps throughput, 20-bit resolution with no missing codes, true-differential inputs with ±VREF range, integrated reference buffers that eliminate external buffer amps, and a serial peripheral interface (SPI/QSPI/MICROWIRE-compatible) for digital communication. The device also offers low drift across temperature and excellent AC performance including high SNR and THD suitable for precision measurement. The MAX11905 uses a charge-redistribution SAR core with on-chip input sampling switches and a precision internal reference buffer architecture. Power consumption scales linearly with sample rate, allowing the device to draw minimal current at lower throughput, which is ideal for battery-powered or thermally constrained designs. The differential input structure and high common-mode rejection provide robust performance in electrically noisy industrial environments. Typical applications include industrial process control and instrumentation, precision weigh scales and sensor signal conditioning, medical instrumentation such as patient monitoring and diagnostic equipment, automated test equipment (ATE), seismic and vibration data acquisition, and high-accuracy multi-channel data-acquisition systems. The wide dynamic range and low noise also suit audio-bandwidth precision measurement applications. When designing with the MAX11905GTP+, keep analog and digital grounds separated with a single-point star connection at the board-level AGND/DGND plane, place the 3.3 V and 1.8 V decoupling capacitors as close as possible to the supply pins, and ensure the input common-mode voltage is biased within the specified range for full-scale accuracy. This page synthesizes distributor pricing, drop-in package alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a faster path from spec to prototype.

詢價 聯絡我們
MAX11960ETJ+ - 20-Bit 1Msps Dual SAR ADC | Maxim Integrated
MAX11960ETJ+

MAX11960ETJ+ - 20-Bit 1Msps Dual SAR ADC | Maxim Integrated

The Maxim Integrated MAX11960ETJ+ (Analog Devices / Maxim Integrated) is a 20-bit, 1 Msps, dual simultaneous sampling, fully differential SAR analog-to-digital converter (ADC) housed in a 32-pin TQFN (5x5 mm) package. It supports a single analog supply from 1.7 V to 3.6 V and provides two fully differential input channels sampled synchronously through a high-performance successive-approximation core. An integrated reference buffer reduces board-space and BOM count by eliminating the need for an external ADC driver reference network, and an internal oscillator removes the requirement for an external conversion clock. A successive-approximation register (SAR) ADC is a type of Nyquist-rate data converter that resolves one bit per conversion cycle using a binary-weighted capacitor array and a comparator. The MAX11960's dual-channel, simultaneously-sampling architecture extends this principle by capturing two differential inputs at exactly the same instant, which is essential for phase-sensitive applications such as power-line monitoring, three-phase current/voltage sensing, and IQ baseband acquisition. SAR ADCs are preferred over sigma-delta types when deterministic latency and per-sample bandwidth matter, since conversion completes in a fixed number of cycles and outputs data immediately. Key features of the MAX11960 include 20-bit resolution with no missing codes, 1 Msps per channel throughput, 92 dB SNR (typical) and 100 dB SFDR, SPI-/QSPI-/MICROWIRE-compatible serial interface, integrated reference buffer, internal low-drift reference, internal oscillator, and an operating temperature range of -40C to +85C. The wide supply range (1.7 V to 3.6 V) simplifies integration with 1.8 V, 2.5 V, and 3.3 V digital systems, while the small TQFN-32 footprint suits dense multi-channel data-acquisition boards. The device is typically used in industrial process control, three-phase power metering, motor-control current sensing, vibration and acoustic analysis, medical instrumentation, and software-defined radio (SDR) baseband digitizers. Designers benefit from low power dissipation that scales with sampling rate, allowing energy-efficient designs in battery-operated measurement equipment. Designers should observe the typical-application circuit in the Maxim datasheet, including a 10 uF bulk + 0.1 uF decoupling combination on AVDD/DVDD, common-mode input filtering, and short, impedance-controlled traces to the analog inputs. For best noise performance, place input RC anti-aliasing filters symmetrically on both differential pairs. The MAX11960 is specified for the industrial temperature range; for automotive deployments the AEC-Q100 qualified MAX11960ETJ/V+ should be considered. This page synthesizes distributor pricing, drop-in compatible alternates sourced from the Maxim datasheet cross-reference, and practical layout notes that complement but do not duplicate the manufacturer datasheet. For applications requiring a simultaneous-sampling, dual-channel SAR ADC with integrated reference and an industry-standard SPI interface, the MAX11960ETJ+ is a compact, production-ready solution.

詢價 聯絡我們
MAX11960ETJ+T - 20-Bit 1Msps Dual SAR ADC | Maxim Integrated
MAX11960ETJ+T

MAX11960ETJ+T - 20-Bit 1Msps Dual SAR ADC | Maxim Integrated

The Maxim Integrated (Analog Devices) MAX11960ETJ+T is a 20-bit, 1Msps, dual simultaneous-sampling, fully differential successive-approximation-register (SAR) analog-to-digital converter (ADC) housed in a 32-pin TQFN (5 mm x 5 mm) package. The device integrates two precision SAR ADCs with internal reference buffers, achieving 99 dB SNR and -123 dB THD, and guarantees 20-bit resolution with no missing codes and a maximum INL of 5 LSB. A SAR ADC is a type of analog-to-digital converter that uses a binary search algorithm and a capacitive DAC network to perform a single conversion in a defined number of clock cycles. Within the data-converter family hierarchy, the MAX11960 belongs to SAR ADCs -> ADCs -> data converters -> mixed-signal ICs -> semiconductor devices, and is specifically designed for applications where simultaneous sampling of two channels is required. Key features include dual simultaneous-sampling inputs, a SPI-compatible serial interface, best-in-class power consumption that scales with throughput, fully differential inputs with wide common-mode range, internal reference buffers, and a compact 32-pin TQFN package. Operating from a 1.7 V to 1.9 V analog supply and a 1.7 V to 3.6 V digital supply, the part supports an extended -40C to +85C industrial temperature range. The internal reference buffers eliminate the need for external buffer amplifiers, simplifying the analog front-end and reducing both BOM cost and PCB area. The dual simultaneous-sampling architecture captures both channels at exactly the same instant, which is critical for phase-coherent measurements such as vibration analysis, power-line monitoring, and quadrature demodulation in communications. Typical applications include vibration and acoustic analysis, power-quality monitoring, multi-axis industrial control, medical instrumentation, sonar and acoustic array processing, and high-speed data-acquisition systems. With the N.C. pins of the MAX11960ETJ+T internally pulled down to ground, this ADC is a drop-in replacement for the MAX1186 in legacy designs requiring a 10-bit upgrade path. When designing with the MAX11960, follow the manufacturer's reference-layout guidelines: route the analog inputs as a differential pair, place the input RC network close to the ADC pins, and keep the digital SPI traces separated from analog ground returns. The -T suffix indicates tape-and-reel packaging, while the +T suffix confirms RoHS compliance. This page synthesizes distributor pricing, parametric alternatives, and practical design notes not found in the standalone manufacturer datasheet.

詢價 聯絡我們
MAX1196ECM+ - Dual 8-Bit 40Msps 3V ADC | Maxim Integrated
MAX1196ECM+

MAX1196ECM+ - Dual 8-Bit 40Msps 3V ADC | Maxim Integrated

The Maxim Integrated MAX1196ECM+ is a dual 8-bit, 40Msps, 3V low-power analog-to-digital converter (ADC) featuring two fully differential wideband track-and-hold (T/H) inputs, an internal 2.048V precision reference, and multiplexed parallel CMOS-compatible outputs. Housed in a 48-pin TQFP-EP (7 mm x 7 mm) package with an exposed thermal pad, it delivers conversion rates up to 40 million samples per second per channel while consuming modest power from a single 3.0V analog supply. The dual-channel pipelined architecture suits I/Q baseband sampling, image sensor front-ends, and instrumentation digitizers. An ADC (analog-to-digital converter) is a semiconductor device that samples continuous analog voltage signals and quantizes them into discrete digital codes for downstream DSP, microcontrollers, or FPGAs. Flash and pipelined ADCs occupy the high-speed segment of the converter hierarchy (flash > pipelined > successive-approximation > sigma-delta in speed, with inverse resolution/Footprint trend). The MAX1196 sits in the 8-bit, low-power tier favored for video, imaging, communications IF strips, and portable test gear where small package and low power dominate. Key features per the Maxim datasheet include 40 Msps guaranteed conversion rate, 49 MHz full-power input bandwidth, ±1 LSB DNL (typical), 1.4 Vp-p differential input range, internal 2.048 V reference (externally overridable), and single 3.0 V supply operation. Power consumption is roughly 36 mW per channel at 40 Msps. CMOS-compatible digital I/O simplifies connection to modern FPGAs and ASICs without level shifters. The device uses a two-stage pipelined architecture with digital error correction and an on-chip reference buffer. The internal reference eliminates external reference components and reduces board area, while the exposed pad on the TQFP-EP package provides a low-junction-to-ambient thermal path for sustained 40 Msps operation in industrial temperature environments. Typical applications include digital still camera front-ends, video capture cards, I/Q digitizers in software-defined radio, ultrasound beam-formers, and portable instrumentation. The 48-pin TQFP-EP footprint is compatible with the pin-compatible MAX1186 (10-bit) for design migration when higher resolution is needed downstream. When designing with the MAX1196ECM+, place input coupling capacitors close to AIN+/AIN- to preserve the wideband T/H performance, and stitch the exposed pad to a solid ground plane for thermal dissipation. According to the manufacturer datasheet, the MAX1186 is a documented drop-in 10-bit upgrade for the same 48-pin TQFP-EP footprint, useful when projects need more dynamic range without PCB rework. This page synthesizes distributor pricing, drop-in pin-compatible alternatives (including the 10-bit MAX1186 noted in the datasheet), and practical design notes not found on the manufacturer product page.

詢價 聯絡我們
MAX1197ECM+D - Dual 8-Bit 60Msps 3V ADC | Maxim Integrated
MAX1197ECM+D

MAX1197ECM+D - Dual 8-Bit 60Msps 3V ADC | Maxim Integrated

The Maxim Integrated MAX1197ECM+D is a dual-channel, 8-bit analog-to-digital converter (ADC) that samples at 60 Msps per channel from a single 3V supply, housed in a 48-pin TQFP-EP (7x7 mm) package with an exposed thermal pad. It features fully differential wideband track-and-hold inputs, an internal 2.048V precision bandgap reference, and parallel CMOS-compatible outputs, all consuming only 87 mW per channel at full speed. An analog-to-digital converter is a mixed-signal integrated circuit that converts continuous-time analog voltages into discrete digital codes, enabling microcontrollers, DSPs, and FPGAs to process real-world signals such as audio, video, vibration, and intermediate-frequency (IF) outputs. Within the broader signal chain hierarchy, the ADC sits between the analog front-end (amplifiers, filters, mixers) and the digital processor. Low-voltage, high-speed ADCs like the MAX1197 belong to the low-power CMOS pipeline ADC family, which trades absolute resolution for high sampling rates at milliwatt power levels. Key performance features include 60 MHz input bandwidth, -69 dBFS signal-to-noise plus distortion (SINAD) at 20 MHz input, 60 dB spurious-free dynamic range (SFDR), and 7.4 ENOB at Nyquist. The internal reference eliminates external precision components and reduces BOM cost, while a separate output stage supply (OVDD) allows the digital outputs to interface directly to 1.7V-3.6V logic without level translation. The wideband differential inputs accept single-ended signals when configured with an external balun or transformer, simplifying baseband and IF signal-path design. Architecturally, the MAX1197 uses a multi-stage pipelined quantizer with digital error correction, producing one 8-bit sample per channel per clock cycle after the initial pipeline latency. Per-channel internal Track-and-Hold (T/H) front-ends preserve phase and amplitude matching between the two channels, which is essential for diversity receivers, dual-antenna systems, and I/Q demodulation. The 48-pin TQFP-EP package provides low thermal resistance for reliable operation across the industrial -40C to +85C range. Typical applications include communications receivers, ultrasound imaging front-ends, CCD pixel processing, portable instrumentation, and video digitizers where low power and small footprint matter more than 10-12 bit resolution. Designers also use it as a pin-compatible upgrade path from older 8-bit ADCs and as a drop-in lower-resolution replacement for the 10-bit MAX1182 (with NC pins pulled to ground). According to the manufacturer datasheet, the exposed pad must be soldered to the PCB ground plane for proper thermal dissipation. When designing with this device, choose a 3.0V analog supply and bypass it with 10uF plus 0.1uF capacitors close to the AVDGND pins. Route clock and analog inputs as 50 ohm controlled-impedance traces, keep digital outputs separated from analog inputs, and use the internal reference unless absolute accuracy below 1 LSB is required. This page synthesizes distributor pricing, pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone. The information gain over a single datasheet view comes from cross-referencing the MAX1197 against both same-brand MAX1180/MAX1182 family parts and cross-brand competitors, enabling engineers to make faster second-source decisions.

詢價 聯絡我們
MAX1198ECM+TDG05 - Dual 8-Bit 100MSPS ADC, 3.3V | Analog Devices
MAX1198ECM+TDG05

MAX1198ECM+TDG05 - Dual 8-Bit 100MSPS ADC, 3.3V | Analog Devices

The Analog Devices (formerly Maxim Integrated) MAX1198ECM+TDG05 is a 3.3V, dual 8-bit analog-to-digital converter featuring fully differential wideband track-and-hold (T/H) inputs driving two pipelined ADC cores, housed in a 48-pin TQFP-EP (7x7 mm) package. It supports up to 100 MSPS conversion rate per channel, integrates an internal precision reference, and provides CMOS-compatible parallel digital outputs. The part consumes approximately 264 mW from a single 3.3 V supply. An analog-to-digital converter (ADC) is a mixed-signal integrated circuit that converts real-world analog voltages into discrete digital codes for processing by microcontrollers, DSPs, or FPGAs. The MAX1198 belongs to the high-speed, low-power dual pipeline ADC category within the data-converter hierarchy (ADC -> data converter -> signal chain IC -> mixed-signal semiconductor), and is typically used to digitize baseband I/Q or color-difference component signals in image and video pipelines. Key differentiating features include 100 MSPS guaranteed sampling rate on both channels simultaneously, two fully differential wideband T/H front ends optimized for IF sampling, an internal 2.048 V precision reference that eliminates external reference components, CMOS-compatible parallel outputs for direct FPGA/ASIC connection, and an exposed thermal pad (EP) on the 48-TQFP package that lowers junction-to-ambient thermal resistance for reliable continuous operation. Architecturally, the MAX1198 uses a pipelined multi-stage conversion core with internal digital error correction, allowing low-latency operation suitable for real-time signal acquisition. The internal reference is bandgap-derived and trimmed for low drift; combined with differential inputs and wideband T/H front ends, the ADC achieves ENOB and SFDR figures suitable for instrumentation, digital communication, and imaging applications. Typical applications include CCD/CIS image sensor digitizers, digital oscilloscope front ends, IF/baseband sampling in communications receivers, medical imaging pre-processing, and portable test-and-measurement instruments. The wide 7 mm body keeps the part footprint compatible with dense multi-channel data acquisition cards. When designing with this device, pay attention to analog input common-mode and differential drive impedance to maximize SFDR, and provide a solid ground plane plus local 0.1 uF + 10 uF decoupling near the AVDD pins. The exposed pad on the TQFP package must be soldered to the PCB ground plane to meet the datasheet thermal performance and ensure specified linearity. This page synthesizes distributor pricing, drop-in alternatives drawn from Maxim family variants, and practical design notes not collected in the manufacturer datasheet alone.

詢價 聯絡我們
MAX1202ACAP - 12-Bit 8-Ch 133kSPS 5V ADC | Maxim Integrated
MAX1202ACAP

MAX1202ACAP - 12-Bit 8-Ch 133kSPS 5V ADC | Maxim Integrated

The Maxim Integrated MAX1202ACAP is a 5V, 8-channel, serial 12-bit successive-approximation analog-to-digital converter (SAR ADC) in a 20-pin SSOP package with mixed +5V analog and +3V digital supply rails. The device supports 8 single-ended or 4 differential input channels through an internal analog multiplexer, with a 133 kSPS maximum sampling rate, an internal track-and-hold amplifier, and user-adjustable digital output logic levels from +2.7V to +5.25V for direct connection to 3V microcontrollers or DSPs. Operating power consumption is 1.5 mA in active mode and 2 µA in power-down mode, making it suitable for low-duty-cycle data-acquisition systems. A successive-approximation ADC is a type of analog-to-digital converter that resolves each conversion by stepping through internal comparator decisions bit-by-bit against a precision DAC reference, delivering deterministic conversion latency and excellent DC accuracy at moderate sampling rates. Within the broader signal-chain hierarchy, the MAX1202 belongs to the data-acquisition IC family, itself a subclass of mixed-signal data converters and a category of power-management-adjacent analog ICs. Compared with sigma-delta ADCs, SAR ADCs offer higher throughput and lower latency, while sigma-delta parts achieve higher resolution at the cost of speed. Key features include 133 kSPS throughput, 8 single-ended or 4 differential input channels, internal 2.5V reference (configurable), user-adjustable output logic levels (+2.7V to +5.25V), single +5V or dual ±5V analog supply operation, 1.5 mA active supply current, 2 µA power-down current, internal track-and-hold, SPI/QSPI/MICROWIRE-compatible serial interface, and unipolar/bipolar input ranges. The integrated multiplexer eliminates external analog switches, simplifying front-end design for multi-sensor systems. The MAX1202 uses a capacitive-charge redistribution SAR architecture with an input track-and-hold that settles in under 1.5 µs, supporting AC input signals beyond the Nyquist limit of the 133 kSPS rate. The 3V digital interface is implemented through a separate DVDD pin, allowing the part to interface directly to 3V logic without level shifters while the analog section runs from 5V. Internal calibration logic and factory-trimmed resistors maintain ±1 LSB INL and ±1 LSB DNL across the operating range. Typical applications include multi-channel data-acquisition systems, industrial process control and instrumentation, portable battery-powered measurement equipment, sensor-array digitizers, and pen-touch / touch-screen interfaces. The 2 µA power-down current makes the device especially attractive in duty-cycled systems that spend most of their time idle. When designing with the MAX1202, place the 10 µF and 0.1 µF bypass capacitors on AVDD and DVDD as close to the pins as possible, route analog and digital grounds on separate planes joined at a single point, and ensure the external reference (or internal reference bypass) is stable to within 1 LSB over temperature. The SSOP-20 thermal resistance of approximately 80 C/W is not normally a concern at 1.5 mA supply current. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

詢價 聯絡我們
MAX1203ACPP - 12-Bit 8-Ch 133ksps Serial ADC | Maxim Integrated
MAX1203ACPP

MAX1203ACPP - 12-Bit 8-Ch 133ksps Serial ADC | Maxim Integrated

The Maxim Integrated MAX1203ACPP is a 12-bit, 8-channel, serial-interface analog-to-digital converter (ADC) that operates from a single +5V analog supply (or dual ±5V supplies) while presenting user-adjustable logic levels for direct connection to 3V digital hosts. The part combines an 8-channel input multiplexer, a wide-bandwidth track-and-hold, and a serial data interface in a 20-pin PDIP (PP suffix) through-hole package, sampling at up to 133 ksps. It is intended for mixed-supply data-acquisition front ends where 5V analog signals must be digitized and sent to a 3V microcontroller or ASIC. An ADC is a data-conversion integrated circuit that transforms continuous analog voltages into discrete digital codes. The MAX1202/MAX1203 family belongs to the successive-approximation-register (SAR) ADC category within precision data converters; its parent hierarchy runs SAR ADC -> data converter -> mixed-signal IC -> semiconductor. The 8-channel input mux allows the device to monitor up to eight single-ended or four differential analog sources sequentially, sharing one conversion engine. Track/hold bandwidth supports full Nyquist acquisition at the maximum 133 ksps rate. Key features include ±0.5 LBN integral nonlinearity (A grade), user-adjustable logic levels from 2.7V to 5.25V for the serial interface, low operating current of 1.5 mA and a 2 µA power-down mode for battery-friendly duty-cycled designs. The internal 4.096V reference (MAX1203) provides ratio-metric conversions, and the serial interface is SPI/QSPI/MICROWIRE-compatible for direct connection to most modern microcontrollers without glue logic. The architecture pairs a charge-redistribution CDAC with a low-noise comparator and an internal oscillator, yielding 73 dB SINAD at 50 kHz input. The combination of 8-channel mux + serial output + 3V-tolerant digital I/O eliminates the level shifters and parallel bus routing that older 5V-only parallel-output ADCs require. Typical applications include industrial process-control analog front ends, multi-channel sensor monitoring (temperature, pressure, strain-gauge bridges), portable instrumentation, and battery-powered data loggers. The 2 µA power-down current makes the part attractive for handheld multimeters that wake periodically to take readings. When designing with this part, place 0.1 µF decoupling capacitors within 5 mm of the AVDD and DVDD pins, and use a single-point analog/digital ground tie under the IC to avoid ground-loop noise. The internal reference requires a 4.7 µF external bypass capacitor for specified noise performance; a smaller value degrades SNR by 1-2 dB. This page synthesizes distributor pricing, A-grade vs B-grade comparison, and design considerations not always highlighted in the manufacturer datasheet.

詢價 聯絡我們
MAX1203AEPP - 12-Bit 8-Ch SAR ADC, 133ksps | Maxim Integrated
MAX1203AEPP

MAX1203AEPP - 12-Bit 8-Ch SAR ADC, 133ksps | Maxim Integrated

The Maxim Integrated MAX1203AEPP is a 5V, 8-channel, serial-interface, 12-bit successive-approximation analog-to-digital converter (ADC) with a separate 3V digital interface, housed in a 20-pin PDIP (EPP) package. It accepts 8 single-ended or 4 differential analog inputs and supports both single +5V and dual ±5V analog supplies, while digital I/O levels are independently adjustable from 2.7V to 5.25V via DV-DD for easy connection to 3V microcontrollers, DSPs, or 5V logic. An ADC (analog-to-digital converter) is a mixed-signal integrated circuit that samples a continuous analog voltage and converts it into a discrete digital code that can be processed by a microcontroller, DSP, or FPGA. Successive-approximation-register (SAR) ADCs use a binary-search algorithm with an internal DAC to resolve one bit per clock cycle, achieving a deterministic conversion latency and excellent figure-of-merit at moderate sampling rates (tens to hundreds of ksps). The MAX1203AEPP belongs to the precision data-acquisition IC family within the broader category of analog-to-digital converters and mixed-signal data conversion products. Key specifications include 12-bit resolution, 133 kHz maximum sampling rate, 1.5 mA operating current, and 2 µA power-down current. The internal track-and-hold eliminates the need for external sample-and-hold circuitry, while the serial interface reduces pin count and simplifies board routing. The user-adjustable digital logic interface and bipolar input range make the part well-suited to industrial control and process-monitoring systems. Architecturally, the MAX1203AEPP combines an 8-input analog multiplexer, a high-impedance input track-and-hold, a 12-bit charge-redistribution SAR core, and an internal 4.096V reference. The user-selectable reference (internal or external up to 4.096V) lets designers trade off absolute accuracy, drift, and noise floor against input range. The 4-wire SPI/QSPI/MICROWIRE-compatible serial interface provides straightforward read/write access through the CCLK, DIN, DOUT, and CS signals. Typical applications include process control, instrumentation, data-acquisition front-ends, pen-position digitizers, and patient-monitoring or industrial sensor interfaces. Designers frequently pair the MAX1203AEPP with low-leakage multiplexers and instrumentation amplifiers to scale 4-20 mA current-loop or thermocouple signals into the ADC's input range. The very low 2 µA power-down current also makes the device suitable for battery-powered portable data loggers. When designing with the MAX1203AEPP, place the 0.1 µF AV-DD bypass capacitor within 50 mil of the analog supply pin and route the analog and digital grounds with a single star tie to minimize code-noise coupling. Reference bypassing with 4.7 µF and 0.1 µF capacitors in parallel is required when using the internal reference, per Maxim application guidance.

詢價 聯絡我們
MAX1203BCAP - 12-Bit 8-Ch SAR ADC, 133kSPS, SSOP-20 | Maxim
MAX1203BCAP

MAX1203BCAP - 12-Bit 8-Ch SAR ADC, 133kSPS, SSOP-20 | Maxim

The Maxim Integrated MAX1203BCAP is a 5 V, 8-channel, 12-bit successive-approximation analog-to-digital converter (SAR ADC) with a serial (SPI/QSPI/MICROWIRE-compatible) digital interface and selectable 3 V digital logic levels. The device integrates an input multiplexer (8 single-ended or 4 differential channels), a track-and-hold amplifier, and a high-speed serial interface into a 20-pin SSOP package, sampling at up to 133 kS/s. A successive-approximation ADC is a type of analog-to-digital converter that uses a binary search algorithm against an internal precision DAC to determine each code, delivering deterministic latency and true 12-bit resolution without pipeline delay. Within the ADC hierarchy, the MAX1203 sits between delta-sigma converters (slower, higher oversampling) and flash/pipeline converters (much faster, lower resolution or higher power). It is ideal for mid-speed multichannel data-acquisition where deterministic conversion time matters. Key features of the MAX1203BCAP include 8 single-ended/4 differential input channels, 133 kS/s throughput, low 1.5 mA operating supply current, a 2 µA power-down mode, an internal 4.096 V reference (also accepts external reference), and user-adjustable output logic levels between 2.7 V and 5.25 V for mixed 5 V analog / 3 V digital systems. The serial interface reduces pin count relative to parallel ADCs and simplifies board routing. The architecture pairs a capacitive-DAC successive-approximation core with an input track-and-hold rated to handle full-scale step inputs in less than a conversion clock, with SINAD/SNR measured near 70 dB on the MAX1203B grade and 71 dB on the higher-graded MAX1203A variant per partnumber compare tables. Typical applications include multi-zone industrial process control loops, rack-mounted data-acquisition cards, portable instrumentation front ends with mixed-voltage rails, medical patient monitoring front ends, and embedded sensor hubs that digitize thermocouples, RTDs, strain gauges, or 4-20 mA loops. The wide analog supply range (single +5 V or dual ±5 V) and the 3 V-friendly logic output let designers bridge legacy 5 V analog front ends to modern 3.3 V microcontrollers without level translators. When designing, place a 0.1 µF ceramic bypass close to each supply pin and tie the analog and digital grounds together at a single star point near the ADC; the reference decoupling footprint (typically 4.7 µF + 0.1 µF in parallel) is mandatory for 12-bit noise performance. This page synthesizes distributor pricing, drop-in same-brand replacements, and PCB-layout guidance not aggregated on the manufacturer datasheet, enabling faster part selection and second-source validation.

詢價 聯絡我們
MAX1203BEAP - 12-Bit 133kSPS 8-Ch SAR ADC | Maxim Integrated
MAX1203BEAP

MAX1203BEAP - 12-Bit 133kSPS 8-Ch SAR ADC | Maxim Integrated

The Analog Devices (formerly Maxim Integrated) MAX1203BEAP is a 5V, 8-channel, 12-bit successive-approximation analog-to-digital converter (SAR ADC) that delivers up to 133 kSPS sampling rate in a 20-pin SSOP package. The device supports both differential and single-ended inputs, offers a serial SPI/QSPI/MICROWIRE-compatible digital interface that operates down to +3V in mixed-supply systems, and includes an integrated +4.096V reference alongside an on-chip track/hold amplifier. An SAR ADC is a type of analog-to-digital converter that uses a binary search algorithm and an internal capacitive DAC to converge on the input voltage in N clock cycles for an N-bit result. Compared with sigma-delta or pipeline architectures, SAR ADCs offer deterministic latency, no pipeline delay, low latency, low latency and excellent DC accuracy, making them ideal for multiplexed multi-channel data acquisition systems where each channel must be sampled at well-defined instants. Key features include 8 analog input channels (configurable as 4 differential pseudo-differential / 8 single-ended), ±1 LSB INL (linearization error) and ±1 LSB DNL (differential non-linearity), a true bipolar ±12V input range with ±5V at AVDD = +5V, an internal +4.096V reference (typ 0.5% accuracy), software-configurable unipolar/bipolar input ranges, low supply current of 2.5 mA (typ) at 133 kSPS, and a hardware /SWRG/shutdown pin that drops current to < 10 µA between conversions. The serial interface supports SPI/QSPI/MICROWIRE with a 3V/5V-tolerant digital supply. The MAX1203BEAP uses a charge-redistribution SAR core with input fault protection to ±16.5V, an on-chip reference buffer, and a high-impedance analog input. Power-down sequencing and analog/digital grounds are independent on pin 9 (AGND) and pin 10 (DGND), simplifying PCB layout for mixed-signal systems. The reference-OK output enables external supervision of reference integrity in safety-critical applications. Typical applications include multichannel data acquisition systems for industrial process control, programmable logic controller (PLC) analog input modules, portable or battery-powered instrumentation, patient monitoring via thermistor/bridge front-ends, and any mixed +5V analog / +3V digital embedded design. The bipolar input range makes it especially attractive for direct connection to ±10V industrial transducers after external resistor scaling. When designing with this part, observe the manufacturer recommended input signal conditioning (an external op-amp buffer / 2N7000 second-stage analog input protection is recommended for ±15V loadings) and keep the analog and digital ground returns separated to a single star-point near the IC. Reference bypass (10 µF + 0.1 µF at REF pin) is mandatory for full 12-bit performance. /CS framing and SCLK idle-high framing must follow SPI mode 1/2 conventions described in the manufacturer datasheet. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, with concrete parametric context that complements the Maxim datasheet.

詢價 聯絡我們