MAX187BCPA
MAX187BCPA - 12-Bit 75ksps Serial ADC + 5V | Maxim/ADI
The Maxim Integrated (Analog Devices) MAX187BCPA is a 12-bit, 75 ksps, low-power, single +5V serial-interface analog-to-digital converter housed in an 8-pin PDIP package. The part combines a successive-approximation register (SAR) ADC core with a fast 1.5 µs track/hold, an internal 4.096 V buffered reference (MAX187 family), an on-chip clock, and a high-speed SPI/QSPI/MICROWIRE-compatible 3-wire serial interface, all in a compact through-hole 8-DIP footprint.
A successive-approximation ADC (SAR ADC) is a type of data converter that uses a binary-search algorithm against an internal DAC to determine each digital output code. SAR ADCs are valued for deterministic latency, excellent DC linearity, and low power consumption relative to their throughput, which makes them the dominant choice for multiplexed data-acquisition systems, instrumentation, and process-control front-ends. The MAX187 sits in the product hierarchy of analog-to-digital converter -> data converter -> signal chain IC -> semiconductor.
Key specifications include 12-bit resolution with ±½ LSB integral nonlinearity (MAX187A grade) or ±1 LSB (MAX187B/MAX187C grades), 75 kHz throughput, 8.5 µs successive-approximation conversion time, 1.5 µs acquisition time, single +5V operation, 1.5 mA operating current, 2 µA shutdown current, and 7.5 mW typical power dissipation reducing to 10 µW in shutdown. The 8-pin DIP pinout provides VDD, GND, VREF (4.096 V buffered), AIN, SCLK, DOUT, CS, and SHDN functions, all conveniently on a 0.300 inch (7.62 mm) through-hole lead pitch.
The MAX187BCPA uses a charge-redistribution SAR architecture with an input track/hold and a laser-trimmed internal reference, achieving AC performance (SINAD and THD) suitable for instrumentation-grade measurements. The MAX187 differs from the pin-compatible MAX189 in that MAX187 integrates a 4.096 V buffered reference while MAX189 requires an external reference, so selection between the two depends on absolute-accuracy vs flexible-reference design priorities.
Typical application areas include portable data loggers, industrial process-control analog input modules, weigh scales and strain-gauge digitizers, panel meters, isolated 4-20 mA loop read-back, and battery-powered instrumentation. The 75 ksps throughput and 5V-only operation are well-matched to multiplexing multiple slow analog channels in 12-bit precision systems.
When designing with the MAX187BCPA, ensure the input source impedance is below approximately 1 kΩ to avoid ADC droop errors during the 1.5 µs acquisition window, and tie CS high between conversions to keep the device in shutdown and minimize power. A 0.1 µF decoupling capacitor placed within 5 mm of the VDD pin is required, and the internal reference should be bypassed with at least 4.7 µF at VREF to filter reference noise.
This page consolidates distributor pricing, parametric drop-in alternatives in the same 8-DIP footprint, and practical design notes from the official Maxim datasheet to help engineers evaluate the MAX187BCPA against modern 12-bit ADC alternatives.
詢價
聯絡我們