介面 IC
子分類
產品（2,300+)
BCM47083SL01 - Single-Band 11n WLAN SoC | Broadcom
Broadcom BCM47083SL01 is a single-band IEEE 802.11n WLAN system-on-chip (SoC) chipset offered in the BCM47083 family for embedded wireless networking equipment. The verified distributor information identifies it as an RF System on a Chip and confirms the 802.11n, single-band WLAN function. The available records identify Broadcom as the manufacturer and Broadcom Avago as the legacy distributor brand designation. A manufacturer datasheet URL, package dimensions, pin count, pinout, operating-frequency range, and detailed electrical ratings are not included in the supplied source data. An RF system-on-chip is an integrated semiconductor that combines wireless radio, baseband processing, and supporting control functions into one device. Within the product hierarchy, it is a WLAN connectivity SoC, a type of wireless network interface integrated circuit, and therefore belongs to the broader semiconductor and integrated-circuit categories. Integration can reduce the component count and board area required for an embedded 802.11n access point, router, gateway, or other connected product compared with a discrete radio approach. The principal verified feature of BCM47083SL01 is single-band IEEE 802.11n operation. This makes it relevant to embedded systems requiring Wi-Fi connectivity without a dual-band radio requirement. The device is listed by Mouser as an RF System on a Chip and WLAN chipset, while the DigiKey and Octopart records identify it as a Broadcom microprocessor-class component. Current distributor availability information compares listings from four distributors, with individual vendors such as Hotenda and Bettlink indicating stock. Because the supplied data does not contain a Broadcom datasheet, detailed RF characteristics cannot be stated safely. Information such as operating frequency, transmit power, receiver sensitivity, supported antenna interfaces, processor architecture, memory configuration, supply voltage, package type, and operating-temperature range requires the missing manufacturer document. The MPN suffix may encode ordering, temperature, or packaging information, but it must not be decoded without an authoritative part-number guide. Consequently, this page does not infer those parameters from the suffix. Typical implementation areas include embedded Wi-Fi routers, wireless gateways, access points, home automation controllers, industrial gateways, and connected consumer equipment. In these systems, the BCM47083SL01 can serve as the central WLAN connectivity component while an Ethernet controller or physical-layer transceiver handles wired networking. Site-listed LAN8720A-CP and DP83822HRHBR parts are examples of Ethernet-interface components that may appear in a broader connected product, although their use with BCM47083SL01 is not verified by the supplied Broadcom documentation. Design review should begin with the official Broadcom datasheet and package drawing. Pin assignment, exposed-pad requirements, RF routing, antenna matching, power sequencing, decoupling, PCB stack-up, and thermal management must be checked against the exact ordering variant. Do not reuse an existing footprint solely from distributor metadata; confirm the physical package and exposed thermal pad before schematic capture or PCB release. This page combines verified distributor descriptions, current sourcing links, specification gaps, engineering-use analysis, and design cautions in one decision-oriented record. It distinguishes confirmed facts from unavailable manufacturer parameters so engineers can identify what must be checked before qualifying BCM47083SL01 in a production wireless design.
BCM5221KPB - 10/100 Ethernet Transceiver | Broadcom
The Broadcom BCM5221KPB is a 10/100BASE-TX/FX mini-PHY Ethernet transceiver with integrated physical-layer signaling, a 64-terminal BGA package, and industrial-temperature positioning. It is designed for network interfaces that need copper or fiber connectivity, link-status control, low-power operation, and compact PCB integration. The verified distributor data identifies the part as a 1/1 Ethernet transceiver, while the Broadcom data sheet provides the authoritative technical details for electrical, mechanical, and software configuration requirements. What is an Ethernet transceiver? An Ethernet transceiver is an interface IC that converts digital data into physical network signals and converts received signals back into digital data. A 10/100BASE-TX/FX mini-PHY sits below the Ethernet MAC and handles the physical encoding, clocking, signal conditioning, and link-related functions required for 10 Mb/s and 100 Mb/s networks. It belongs to the interface-IC hierarchy: Ethernet interface transceiver, physical-layer device, network-interface IC, and semiconductor. The BCM5221KPB is identified in the supplied data as a Broadcom 10/100BASE-TX/FX mini-PHY transceiver. The verified source list includes an official Broadcom PDF and distributor listings from DigiKey, Mouser, Octopart, Win Source, and other suppliers. The package is identified by the Partstack result as a square 64-terminal BGA with a ball terminal form and industrial temperature grade. Exact pin assignments, electrical limits, media interfaces, clocking modes, and register details remain tied to the manufacturer data sheet. Typical uses include embedded Ethernet equipment, industrial controllers, network adapters, telecom access equipment, and systems requiring a compact copper/fiber physical-layer interface. In a copper link, the device connects the Ethernet MAC-side digital interface to the transformer-coupled 10/100BASE-TX network. In a fiber-oriented implementation, the FX capability can support the appropriate optical-module interface, subject to the detailed application requirements in the Broadcom data sheet. Its industrial-grade identification makes it more relevant to equipment operating outside consumer-only temperature ranges, although exact temperature limits must be taken from the manufacturer documentation. Designers should verify the package land pattern, ball assignments, decoupling requirements, media-side components, and supported operating modes directly against the Broadcom data sheet. PCB layout is especially important for high-speed physical-layer signals; controlled impedance, short return paths, uninterrupted reference planes, and careful isolation between transmit and receive paths can reduce signal-integrity risk. Do not infer pin compatibility or substitute parts from package similarity alone. This product page combines the verified source URLs, practical interface-transceiver context, and explicit data gaps. It does not invent missing electrical values, pricing, pin names, or alternative cross-references that were not present in the supplied evidence.
BCM5222KPF - Dual-Port 10/100BASE-TX Ethernet PHY | Broadcom
Broadcom BCM5222KPF is a highly integrated dual-port 10/100BASE-TX Ethernet transceiver with digital adaptive equalization, ADC, phase-lock loop, line driver, encoder, decoder, and required support circuitry in a monolithic CMOS device. It supports IEEE 802.3u Fast Ethernet operation, including the Media Independent Interface (MII) and Auto-Negotiation functions, and is supplied in a 100-ball FBGA package. An Ethernet PHY, also called a physical-layer transceiver, is the interface between a digital network controller and copper Ethernet cabling. It converts transmitted digital symbols into analog signaling, receives and equalizes incoming analog signals, and converts them back into digital data. The BCM5222KPF places two Fast Ethernet physical-layer channels and their common support functions into one device, reducing external component count in dual-port network equipment. According to the manufacturer datasheet, BCM5222 integrates an adaptive equalizer, ADC, PLL, line driver, encoder, decoder, and support circuitry. The device is designed for dual-port 10/100BASE-TX networks and includes MII and Auto-Negotiation support. The verified distributor data identifies an industrial temperature grade, ball terminal form, square package shape, FBGA package code, and 100 terminals. Detailed electrical limits, pin assignments, clock requirements, and register behavior must be confirmed in the manufacturer datasheet before design release. The BCM5222 family is suited to Ethernet switches, routers, network interface cards, embedded gateways, industrial controllers, and other systems requiring two copper Fast Ethernet ports. Its integrated CMOS implementation can simplify board layout compared with a discrete transceiver approach, although careful separation of analog and digital circuits remains essential. MII compatibility allows connection to a compatible Ethernet MAC, while Auto-Negotiation supports speed and duplex negotiation according to the system configuration. A practical design must preserve the transceiver's required decoupling, controlled clocking, MII signal integrity, and high-speed differential routing. The 100-ball FBGA package requires careful escape routing and via-in-pad or via-near-pad strategy on multilayer PCBs. Because the supplied data does not include verified pin names or detailed timing, power, and environmental limits, engineers should use the official BCM5222 data sheet for the complete schematic, layout, and component-selection checklist. This product page combines the official Broadcom datasheet reference, distributor package data, and practical Ethernet-PCB guidance. It does not infer undocumented alternatives or specifications. Review the source links and manufacturer documentation for procurement, lifecycle, and design qualification requirements.
BCM5222KQMG - Dual-Port 10/100 Ethernet PHY | Broadcom
The Broadcom BCM5222KQMG is a dual-port, full-duplex Ethernet physical-layer transceiver supporting 10 Mbps and 100 Mbps operation in a 100-lead MQFP package measuring 14 x 20 mm. The device belongs to the Ethernet PHY hierarchy, where a PHY connects a digital media-access controller to a copper Ethernet network through an MII interface. An Ethernet PHY is the physical-layer portion of an Ethernet communication system. It converts digital data into signals suitable for transmission over twisted-pair cabling and recovers timing and data from received signals. According to the Broadcom BCM5222 data sheet, the BCM5222 integrates a digital adaptive equalizer, analog-to-digital converter, phase-locked loop, line driver, encoder, decoder, and supporting circuitry in one monolithic CMOS device. It complies with the IEEE 802.3u requirements for Fast Ethernet, including the Media Independent Interface and Auto-Negotiation sections. The verified distributor listing identifies BCM5222KQMG as a 2/2 full-Ethernet transceiver with PHY functionality and a 100-MQFP package. A separate indexed specification describes the BCM5222 family as a dual-port 10/100BASE-TX Fast Ethernet transceiver. These facts make the part applicable to dual-port embedded networking equipment, but the supplied data does not state the exact PHY-versus-MAC division for every internal function, nor does it provide a complete electrical performance table for this orderable MPN. Its monolithic integration is significant because it consolidates several receive and transmit signal-chain blocks into one component. The integrated adaptive equalizer supports copper-channel signal conditioning, while the phase-locked loop, converter, line driver, encoder, and decoder form the core transmit and receive implementation described by Broadcom. The supported MII and Auto-Negotiation functions help connect the PHY to an Ethernet MAC through a conventional parallel interface. Typical application candidates include industrial Ethernet controllers, embedded network appliances, printer and scanner interfaces, network interface cards, and dual-port embedded communication systems. Because the verified excerpts do not provide supply voltage, operating temperature, media reach, cable length, jitter, latency, EMI performance, or exact register compatibility, these specifications must be checked in the manufacturer data sheet before schematic sign-off. A practical design decision is to preserve the 100-MQFP footprint and verify the exact MII pin assignments before routing. Designers should also check the Broadcom reference design or application guidance for recommended magnetics, termination, crystal or clock requirements, decoupling, and controlled-impedance layout. Those implementation details cannot be inferred solely from the distributor classification. This page separates verified BCM5222KQMG facts from unavailable orderable-part details and synthesizes sourcing, comparison, and design considerations for engineers. It does not substitute generic Ethernet-PHY claims for missing manufacturer data, helping procurement and hardware teams distinguish confirmed specifications from parameters that still require verification.
BCM53158XMB0KFBG - 8-Port GbE Managed Switch SoC | Broadcom
The Broadcom BCM53158XMB0KFBG is an 8-port Gigabit Ethernet managed switch system-on-chip (SoC) integrating 10/100/1000 Base-T/TX PHYs, a high-performance switch fabric, and management interfaces (I2C, SPI) in a single IC. It targets cost-sensitive enterprise, SMB, and industrial Ethernet switching applications, providing Layer 2 switching with full wire-speed performance on all eight integrated PHYs simultaneously. What is a managed Ethernet switch SoC? A managed Ethernet switch SoC combines the physical layer transceivers (PHYs), the Layer-2 packet switch fabric, the lookup table / forwarding engine, and management CPU interfaces into a single silicon die. In the broader system hierarchy it belongs to: Ethernet controller -> network controller -> networking IC -> semiconductor. Unlike a dumb unmanaged switch ASIC or a discrete MAC+external PHY approach, an integrated switch SoC eliminates inter-IC MII/GMII buses, reduces BOM cost, simplifies PCB layout, and shrinks the overall switch design footprint. Key features include eight integrated 10/100/1000 Mbps copper transceivers compliant with IEEE 802.3, 10/100/1000 Base-T/TX standards, wire-speed Layer-2 forwarding, support for advanced QoS, VLAN tagging, IGMP snooping, and port-mirroring features, plus an SPI master/slave port and I2C management interface for CPU-less or host-managed configurations. The integrated PHYs support auto-negotiation, auto-MDI/MDIX crossover, and Energy-Efficient Ethernet (EEE) per IEEE 802.3az. The BCM53158XMB0KFBG uses Broadcom's proven RoboSwitch architecture with shared-memory packet processing and a 12 Gbps internal fabric that supports full line-rate operation on all eight ports. On-chip regulators simplify power-supply sequencing, and per-port activity LEDs are driven directly, removing external LED drivers. Typical applications include 8-port unmanaged/managed Gigabit Ethernet switches, SMB and home-office gateway routers with integrated switching, IP surveillance NVR switches, industrial Ethernet switches, and PoE midspan/spans that need integrated PHY+MAC functionality. When designing with this device, ensure the MII/RGMII/SPI/I2C connections to the host CPU or EEPROM are properly terminated, and that adequate bulk decoupling is placed near the analog supply pins to meet IEEE 802.3 return-loss specifications. The BCM53158XMB0KFBG uses a standard Broadcom switch reference design footprint, simplifying layout reuse across the BCM5315x family. This page synthesizes distributor pricing, drop-in alternatives within the BCM5315x family, and practical design notes not found in the manufacturer datasheet.
BCM53158XMB1KFBG - 12-Port GbE Switch with 10G Uplinks | Broadcom
The Broadcom BCM53158XMB1KFBG is an ultra-low-power 12-port Layer-2 Gigabit Ethernet switch from the RoboSwitch family, integrating 8x Gigabit Ethernet (GE) PHYs, 1x QSGMII, and 2x 10G uplink interfaces in a single 311-pin LFBGA package. According to Broadcom's product family datasheet, the BCM53154/BCM53156/BCM53158 family targets cost-effective low-power applications across SMB, Enterprise, Service-Provider, SOHO, and Industrial markets, with C-Temp commercial operating range. A Layer-2 Ethernet switch is a network device that operates at the data link layer (OSI Layer 2) to forward Ethernet frames between connected devices using MAC address lookup tables. Layer-2 switches form the foundational building blocks of virtually every wired enterprise, industrial, and SMB network. The BCM53158 belongs to the broader taxonomy: Ethernet switch -> network switch -> networking IC -> semiconductor, integrating PHY, MAC, and switch fabric functions on a single die to reduce BOM cost and PCB area. Key features include IEEE 802.3 compliance, support for 10/100/1000 Base-T/TX PHY interfaces, integrated ARM-class management CPU, and a rich set of host interfaces including GPIO, I2C, MII, and SPI. The 10G uplink ports enable aggregation to backbone switches, while the QSGMII provides a quad-SERDES interface commonly used to connect to a host CPU or upstream device. The architecture supports advanced Layer-2 features such as VLAN tagging (802.1Q), QoS prioritization, IGMP snooping, and port-based security. Technical depth: The BCM53158XMB1KFBG implements Broadcom's proven RoboSwitch architecture with shared-memory packet buffer architecture, hardware-based address learning, and store-and-forward switching. The integrated 10G SERDES lanes enable direct connection to SFP+ cages or backplane interfaces without external PHYs. The device typically operates from a single 1.0V/1.2V core supply with 3.3V I/O, and supports Energy Efficient Ethernet (EEE, 802.3az) for power savings on idle links. Typical applications include SMB managed switches, industrial Ethernet switches, SOHO routers with multi-port LAN, service-provider customer-premises equipment (CPE), and enterprise branch office access switches. The 10G uplinks make the device suitable for aggregation tiers where 1G access ports need to feed 10G backbone capacity. Design consideration: When designing with the BCM53158XMB1KFBG, ensure the 311-pin LFBGA PCB land pattern is manufactured with HDI (high-density interconnect) processes such as laser-drilled microvias. Thermal management requires a copper pour beneath the exposed die paddle; without proper thermal vias the device will throttle at high ambient temperatures. Reference Broadcom's reference design guide for magnetics selection and layout. This page synthesizes distributor pricing, parametric comparison with alternative Ethernet switches, application guidance, and design notes not found in the manufacturer datasheet alone - enabling faster design-in and procurement decisions.
BCM53158XUB1KFBG - 8-Port GE Robo2 Switch + 2x10GE Uplinks | Broadcom
The Broadcom BCM53158XUB1KFBG is an 8-port Gigabit Ethernet Layer-2 switch with two 10-Gigabit uplink ports, optimized for ultra-low-power applications in cost-sensitive networking equipment. Part of the BCM53154/BCM53156/BCM53158 family (Robo2 generation), it integrates eight 10/100/1000 BASE-T/TX PHYs, two 10GE SGMII/XFI uplink interfaces, an ARM-based management CPU, packet processors, and MAC address tables, all in a single high-integration BGA package. The 'U' suffix denotes the Commercial grade, and 'B1' identifies the silicon revision. An Ethernet switch IC is a semiconductor device that interconnects several LAN segments at Layer 2 of the OSI model, forwarding Ethernet frames between ports using MAC address lookup tables. Modern highly-integrated switch ICs combine the PHYs, MACs, queueing engines, and CPU subsystem onto a single die, reducing BOM cost and PCB area for routers, gateways, and industrial Ethernet equipment. Within the taxonomy: Ethernet switch -> Layer-2 switch -> network IC -> wired networking semiconductor -> integrated circuit. Key features include support for 8 GE downlink ports plus 2x10GE (or 2x5GE/2x2.5GE) flexible uplinks, IEEE 802.3az Energy-Efficient Ethernet, IPv4/IPv6 L2/L3/L4 ACL, QoS with eight queues per port, and integrated 8051-compatible management. It supports SPI, I2C, MII/GMII, and GPIO host interfaces for management, plus LED controllers for per-port link/activity indication. The device operates from a single 1.0V core supply with integrated voltage regulators, minimizing external component count. The BCM53158XUB1KFBG is fabricated in a low-power CMOS process and uses power-gating on inactive PHYs to deliver sub-watt idle consumption. Its packet processor supports wire-speed forwarding on all GE ports plus line-rate 10GE uplinks, with hardware NAT and tunnel offload for gateway deployments. Built-in TCAM enables wire-speed ACL and QoS classification without CPU intervention. Typical applications include SMB/SOHO routers, enterprise edge switches, xDSL/cable gateways, Wi-Fi 6/7 access points, industrial Ethernet switches, and small-cell backhaul. The 2x10GE uplinks enable aggregation into 10G core networks without an additional switch device. Design considerations include proper decoupling of the 1.0V core rail and thermal management of the high-ball-count BGA package in confined enclosures. This page synthesizes distributor pricing snapshots, package diagrams, and design notes that complement the manufacturer datasheet for engineers evaluating the BCM53158XUB1KFBG.
BCM5324MKPB - 24-Port Managed Ethernet Switch | Broadcom
Broadcom BCM5324MKPB is a single-chip L2+ managed Ethernet switch with 24 10/100 ports and 2 Gigabit Ethernet ports in a 400-pin BGA package. It consolidates multiport switching and Ethernet interface control into one dedicated networking semiconductor, providing a compact solution for equipment that needs numerous copper Ethernet connections plus faster uplink or network-backbone ports. An Ethernet switch is a networking semiconductor that receives Ethernet frames on one port and forwards them toward their destination port. An L2+ managed switch performs this Layer 2 forwarding function while adding network-management capabilities. BCM5324MKPB therefore belongs to the hierarchy Ethernet switch → managed Ethernet switch → L2+ switching IC → interface and networking semiconductor. It is suited to industrial, communications, and embedded systems requiring more ports than a conventional multi-port network interface controller. The principal verified specifications are 24 Fast Ethernet ports, 2 Gigabit Ethernet ports, L2+ managed-switch operation, and single-chip integration. These features allow a design to replace separate switching components, reduce board-level interconnect complexity, and preserve a consistent Ethernet front end. The two Gigabit Ethernet ports can provide higher-bandwidth links than the 10/100 ports, although exact uplink bandwidth, latency, and media support require confirmation from the manufacturer datasheet. Technically, the BCM5324MKPB is positioned as a dedicated Ethernet interface and switching IC rather than a general-purpose processor. Its mixed port arrangement supports equipment with many endpoint connections, such as access equipment, embedded controllers, or communication systems. Exact switching capacity, MAC address table size, packet rates, PHY integration, operating voltage, clock requirements, and management features are not included in the supplied verified records and should be obtained from the manufacturer datasheet before design release. Typical uses include industrial Ethernet gateways, communications equipment, access-control systems, embedded network controllers, and data-acquisition systems. In these applications, the 24 Fast Ethernet ports connect sensors, computers, cameras, or service equipment, while the 2 Gigabit Ethernet ports provide higher-speed connectivity to an upstream switch or network backbone. System partitioning depends on traffic type and performance requirements that are not quantified in the available data. The primary design precaution is to verify the exact package pinout, power rails, reference clock, magnetics, thermal limits, and supported media before schematic capture. A 400-pin BGA also requires careful PCB escape routing and assembly-process qualification. Because the provided web evidence does not expose a verified pin-by-pin assignment or complete electrical table, engineers should treat the manufacturer datasheet as the controlling source. This product page consolidates distributor availability, port-configuration facts, package information, and related switch references into an engineering-oriented summary. It also distinguishes verified facts from missing technical data, helping designers identify whether BCM5324MKPB fits a new board without relying on incomplete distributor descriptions.
BCM5324SKPB - 24+2G Managed Ethernet Switch | Broadcom
Broadcom BCM5324SKPB is a Layer 2 managed Ethernet switch with 24 Fast Ethernet ports and 2 Gigabit Ethernet ports, supplied in a Broadcom surface-mount package. The verified product listings identify the device as a 24+2G L2 Ethernet managed switch, while its integrated switching functionality is intended for consolidating copper-network connections in access, enterprise, industrial, and communications equipment. Its combination of 24 10/100 ports and 2 Gigabit Ethernet ports provides a practical path for linking slower legacy endpoints to higher-bandwidth uplink or backbone connections. An Ethernet switch is a networking semiconductor that receives frames on one port and forwards them toward the appropriate destination port according to Layer 2 addresses. A managed Layer 2 switch adds configuration and monitoring capabilities beyond basic unmanaged Ethernet switching. This hierarchy places the BCM5324SKPB within switching silicon, Ethernet interface devices, communication ICs, and broader network-interface semiconductors used to connect computers, industrial controllers, IP cameras, access equipment, and other Ethernet-enabled products. The primary verified feature is the BCM5324SKPB's 24+2 port arrangement: 24 Fast Ethernet ports alongside 2 Gigabit Ethernet ports. This mixed-speed design can support numerous 100 Mbit/s devices while preserving two ports for Gigabit Ethernet uplink, server, or aggregation links. The verified listings do not provide switching fabric throughput, MAC-table capacity, packet rates, latency, supported PHY standards, power consumption, clocking requirements, or management-feature details; those values must therefore be confirmed in the manufacturer documentation before final design sign-off. The BCM5324 family is described in the verified search results as a single-chip Layer 2 managed switch with 24 10/100 ports and 2 Gigabit Ethernet ports. A single-chip integration can reduce component count and simplify the relationship between the Ethernet physical-layer interfaces and the internal frame-processing engine. Exact internal architecture, process technology, register organization, and interface timing cannot be established from the supplied excerpts and should not be inferred from the distributor summaries. Typical deployment opportunities include unmanaged or managed access switching, industrial Ethernet gateways, factory-floor equipment aggregation, IP-camera and surveillance networks, building access systems, and compact communications appliances. The 24 copper ports are particularly useful where many 100 Mbit/s devices must be connected locally, while the 2 Gigabit Ethernet ports can serve high-speed uplinks. Actual support for features such as VLANs, spanning tree, QoS, IGMP, loop prevention, and managed configuration must be verified against the applicable Broadcom documentation before specifying these functions. PCB design should not begin from distributor snippets alone. Obtain the official BCM5324SKPB datasheet and verify the exact package drawing, exposed-pad requirements, pin assignment, recommended PHY magnetics, reference clock, supply rails, decoupling network, thermal performance, and software-support expectations. Because the supplied data does not expose those implementation details, engineers should preserve the manufacturer's reference schematic and layout wherever possible rather than relying on inferred values. This product record combines verified port-count information with distributor, aggregator, and cross-reference sources. It also clearly separates confirmed characteristics from unavailable technical data, avoiding unsupported performance claims. The accompanying FAQ, application guidance, and source links support initial component discovery, while final electrical, thermal, software, and lifecycle qualification remains dependent on the manufacturer documentation.
BCM5387IFBG - 8-Port SGMII Ethernet Switch | Broadcom
Broadcom BCM5387IFBG is an 8-port SGMII Ethernet switch controller with integrated media access controllers, address management, packet buffering, and a non-blocking switch controller in a monolithic 0.13 µm CMOS device. The BCM5387IFBG supports the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3x specifications identified in the manufacturer preliminary data sheet. An Ethernet switch controller is an interface IC that manages frames between network ports and an upstream system. In this product hierarchy, the BCM5387 belongs to Ethernet switches, interface ICs, and integrated circuits. Its eight-port SGMII architecture allows multiple Gigabit Ethernet connections to be consolidated behind a high-speed serial interface, reducing the number of physical network interfaces required in a multi-port networking system. The principal verified feature of the BCM5387IFBG is its 8-port SGMII switching capability. The device integrates the packet buffer, eight media access controllers, address management, and the non-blocking switch controller into one monolithic IC. This integration reduces the external component count required to implement a multi-port switching subsystem while retaining centralized frame handling and MAC control functions. The BCM5387 is manufactured using 0.13 µm CMOS technology. That process information comes from the preliminary manufacturer data sheet and identifies the device as a highly integrated high-speed switch solution. The supported Ethernet specifications include conventional Ethernet, Fast Ethernet, 1000BASE-T-related operation described by IEEE 802.3ab, and IEEE 802.3x MAC-control operation. Detailed electrical limits, clock requirements, register defaults, and transceiver characteristics are not included in the supplied web data. Typical uses include eight-port Gigabit Ethernet aggregation, industrial network gateways, managed network equipment, set-top and customer-premises networking, and centralized port switching. The SGMII interface is particularly useful when the system needs a compact digital interface between the switch controller and external physical-layer transceivers rather than integrating copper and fiber PHYs inside the switching IC. Designers should treat the available document as preliminary and verify the production device's complete pin list, power rails, clocking, reset requirements, and electrical characteristics before layout release. Because the supplied sources do not identify the exact BCM5387IFBG package or provide a complete pinout, the package and pin data remain unresolved rather than being inferred from the orderable part number. This page consolidates the verified distributor and manufacturer-document information available as of October 28, 2026, and separates confirmed facts from unresolved engineering data. It also records pricing observations, application context, design cautions, and the absence of independently verified drop-in replacements, helping engineers assess sourcing and validation work before committing the legacy switch controller to a new design.
BCM5387KFBG - 8-Port 5GbE SGMII Switch | Broadcom
Broadcom BCM5387KFBG is an 8-port Ethernet switch with integrated SerDes, SGMII connectivity, and an SPI control interface, supplied in a 256-BGA package measuring 17 mm by 17 mm. The verified distributor information identifies the device as a 5GbE port switch, while the Broadcom product data describes its broader role as an Ethernet switch controller for multi-port network equipment. An Ethernet switch controller is an integrated circuit that coordinates traffic between multiple physical network ports. It belongs to the hierarchy of Ethernet interface integrated circuits, network interface controllers, interface semiconductors, and broader communication semiconductors. In this product, an integrated SerDes provides the physical-layer signaling path, SGMII supplies a serial Gigabit Ethernet interface, and SPI provides a host-processor control connection. The principal verified feature set includes eight switch ports, 5GbE-class operation, integrated SerDes, SGMII support, and SPI control. These features make the BCM5387KFBG relevant to compact network appliances, access equipment, industrial Ethernet systems, and other designs requiring multiple high-speed Ethernet ports. Its 256-BGA package supports dense PCB layouts, but it also requires careful escape-routing, power-plane design, and thermal analysis because of its fine ball-grid-array construction. The integrated SerDes architecture reduces the need for separate PHY-related circuitry when the host system uses compatible SGMII links. SGMII carries Ethernet data and control information over a high-speed parallel or serial interface intended for communication between Ethernet switching or PHY subsystems and a host processor. Exact lane rates, SerDes signaling levels, supported copper media, and internal switching architecture were not exposed in the supplied verified results and must be confirmed in the manufacturer datasheet before design release. Typical implementation targets include eight-port Ethernet switches, industrial network gateways, endpoint controllers, and communication equipment that uses SGMII-connected SerDes links. The SPI interface can support register configuration, initialization, and runtime control from an embedded controller. Actual protocol timing, register access behavior, clock requirements, and software model should be validated against Broadcom's complete technical documentation rather than inferred from distributor summaries. A critical design consideration is the 256-BGA footprint. Signal escape routing, via-in-pad use, multilayer construction, power-plane continuity, and exposed thermal strategies can materially affect manufacturability. The supplied sources do not provide detailed pin assignments, ball maps, recommended capacitors, or thermal resistance, so these values remain unavailable and should be obtained from the authoritative Broadcom documentation before schematic capture. This page consolidates verified distributor availability, the published 12.6817 US-dollar starting price as of 2026-10-29, package identification, interface descriptions, and a rigorous drop-in-replacement assessment. It also separates documented facts from missing engineering data, helping procurement and engineering teams avoid assuming unverified pin compatibility or unconfirmed electrical performance.
BCM5388KPBG - 8-Port Unmanaged Gigabit Ethernet Switch | Broadcom
Broadcom BCM5388KPBG is an 8-port unmanaged Gigabit Ethernet switch controller in the Interface ICs category. The verified product description identifies the device as an 8-port unmanaged GE switch, while distributor listings classify it as an interface controller. These details position the part as a network connectivity solution for designs that require multiple Gigabit Ethernet ports without managed-switch features. An unmanaged Ethernet switch provides basic layer-2 frame forwarding between connected devices while automatically learning source MAC addresses. This operating model reduces configuration complexity and can shorten evaluation time in embedded gateways, industrial controllers, digital signage systems, access equipment, and other networked products. The BCM5388KPBG is specifically identified as supporting eight Gigabit Ethernet ports, making it relevant to compact systems that need to consolidate several network links into one switching device. The verified data does not specify PHY integration, supported copper media, upper-layer interfaces, switching fabric throughput, frame-buffer capacity, MAC-address capacity, auto-negotiation behavior, VLAN support, operating temperature, supply voltage, or package dimensions. Those parameters must be confirmed in the manufacturer documentation before the device is specified for a new design. In particular, engineers should verify whether an external magnetics interface is required and whether the host processor connects through an embedded controller interface, a parallel bus, or another serial interface. The KPBG ordering suffix identifies a specific Broadcom orderable configuration, but the supplied snippets do not establish its exact package, pin count, lead-free status, or automotive qualification. Consequently, a board-level footprint cannot be treated as confirmed from the available evidence. Before replacing an existing BCM5388KPBG, compare the complete ordering code, exposed pad requirements, pin names, reference clock, power rails, reset behavior, strap options, and external component recommendations against the applicable datasheet revision. BCM5388KPBG is best considered for unmanaged Gigabit Ethernet aggregation rather than applications requiring VLAN policy, spanning-tree management, packet prioritization, or administrative control. It can simplify a network architecture when eight local links must reach one internal host or uplink. Its suitability depends on matching the verified port count and interface requirements to the target system while confirming all electrical and mechanical details that are absent from the current source excerpts. This page distinguishes verified product facts from unavailable technical fields and explicitly identifies missing data rather than guessing. It also consolidates source links, sourcing guidance, application-fit considerations, and drop-in-replacement constraints. That separation is important because an 8-port unmanaged switch function alone does not prove package, pin, software, or electrical compatibility with another Ethernet switch.
BCM5389IFB - 8-Port SGMII Ethernet Switch | Broadcom
Broadcom BCM5389IFB is an 8-port SGMII Ethernet interface controller integrating a packet buffer, media access controllers, address management, and a non-blocking switch controller in one monolithic 0.13 µm CMOS device. It complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3x, supporting the MAC control, pause-frame, and auto-negotiation functions required by industry-standard Ethernet, Fast Ethernet, and Gigabit Ethernet equipment. The device is supplied in a 256-ball BGA package for high-density telecommunications and networking designs. An Ethernet switch controller is a specialized network-interface IC that coordinates traffic among multiple Ethernet ports. In the broader hierarchy, it belongs to Ethernet controllers, then network interface controllers, then interface ICs, and ultimately semiconductor components. Broadcom's BCM5389 family consolidates switching, buffering, media access control, and management functions so that a system can implement a multiport switching subsystem without assembling the equivalent from separate discrete blocks. The verified product information identifies BCM5389IFB as an 8-port SGMII switch interface and an Ethernet controller. Its integration reduces the number of external functional blocks and can simplify board routing compared with a multi-chip architecture. The non-blocking switch controller is designed to process traffic among the eight ports while the packet buffer manages queued frames. SGMII provides the physical-layer interface between the MAC-side controller and external Ethernet PHYs. Compliance with IEEE 802.3 and its 802.3u, 802.3ab, and 802.3x subsections provides compatibility with standard Ethernet, Fast Ethernet, and Gigabit Ethernet devices. The included MAC control and pause-frame support are relevant to traffic management, while auto-negotiation support helps the system establish compatible operating modes with connected network equipment. These functions make the controller suitable for gateways, access equipment, and other multiport network systems. Typical implementation places BCM5389IFB between eight SGMII-capable external PHYs and the surrounding switching or communications system. The controller manages the Ethernet MAC and switching functions, while the PHYs perform signal transmission and reception. Board design must account for high-speed differential routing, solid return paths, decoupling, BGA assembly, and the thermal footprint of a 256-ball package. For an existing PCB, replacement should not be selected from the generic BCM57xx, BCM53xx, or BCM54xx families without verifying the exact pinout, power rails, clocking, PHY interface, management registers, and protocol support. The verified data does not identify any pin-compatible substitute, so this page does not assert an unverified drop-in replacement. This page combines the verified manufacturer-document excerpts with practical integration guidance, comparison context, and procurement information. It distinguishes documented functionality from parameters that remain unavailable, helping engineers evaluate BCM5389IFB without treating generic Ethernet-controller family similarities as proof of replacement compatibility.
BCM5389IFBG - 8-Port Gigabit Ethernet Switch | Broadcom
The Broadcom BCM5389IFBG is an 8-port Gigabit Ethernet switch with integrated SerDes in a 256-pin FBGA package. It combines eight 1000 Mb/s SGMII/SerDes ports, one GMII/RGMII/RvMII interface, nine IEEE 802.x-compliant MACs, a 128 KB packet buffer, and support for 9 KB jumbo frames. Its 1.2 V operating supply makes it suitable for compact, power-conscious SOHO and subnet networking equipment. An Ethernet switch is a semiconductor that forwards Ethernet frames between connected ports using dedicated MAC addresses. The BCM5389IFBG belongs to the Ethernet switch hierarchy, where it integrates multiple physical-layer-facing SerDes interfaces with frame-processing logic. This consolidation allows a router, gateway, or subnet switch to support multiple Gigabit Ethernet links without requiring eight separate external switch devices. Its integrated SerDes also reduces board-level interconnect requirements compared with solutions using discrete PHY components. Key features include eight Gigabit Ethernet ports, eight SGMII/SerDes interfaces, one selectable GMII, RGMII, or RvMII interface, and nine compliant MACs. The device supports 128 KB of packet buffering and 9 KB jumbo frames. According to the Broadcom datasheet indexed by the verified sources, it complies with IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3x, including MAC control, pause-frame, and autonegotiation behavior. These standards provide the foundation for Fast Ethernet, Gigabit Ethernet, flow control, and compatible network interoperability. The eighth-generation switch-on-chip architecture is intended to reduce the external component count of multiport network products. Eight integrated SerDes interfaces can expose copper or optical network links through suitable PHY or transceiver circuitry, while the GMII/RGMII/RvMII interface connects the switching system to a host processor or uplink controller. The 256-pin FBGA package supports high-density routing but requires careful escape-routing and via-in-pad or fanout-aware PCB construction. Typical applications include SOHO routers, residential gateways, Ethernet subnet switches, network appliances, and industrial or embedded systems that aggregate multiple Gigabit Ethernet links. The 1.2 V supply and integrated SerDes can simplify power-tree design and reduce PCB area, but the high-density BGA package, multi-rail sequencing requirements, and high-speed signal integrity demands careful reference-plane continuity, decoupling, and connector-return-path planning. The principal design challenge is preserving signal integrity across the short, dense escape paths between the FBGA device and external PHY, magnetics, and connector hardware. Differential SerDes routing should use a continuous reference plane, controlled impedance, minimal stubs, and tightly placed decoupling. Differential pair geometry, via transitions, and return paths must be validated with the actual PCB stack-up and connector models. This page consolidates verified Broadcom and distributor information into an application-oriented engineering summary, including the switch architecture, interface hierarchy, package implications, design cautions, and the one same-family drop-in candidate supported by the supplied cross-reference evidence. Pricing and lead time remain distributor-dependent and should be confirmed for the requested quantity as of the current sourcing date.
BCM5389KFB - 8-Port Gigabit Ethernet Switch | Broadcom
Broadcom BCM5389KFB is an 8-port Gigabit Ethernet switch with integrated SerDes, a 9-Gigabit non-blocking switch fabric, and a 256-BGA package measuring 17 x 17 mm. The verified source data identifies one GMII/RGMII/RvMII interface, nine 802.x-compliant MACs with 9-KB jumbo-frame support, eight SGMII/SerDes interfaces, 128-KB packet-buffer memory, and an SPI control interface. An Ethernet switch is a semiconductor that connects multiple network endpoints through a shared internal fabric, forwarding Ethernet frames according to learned or configured addresses. The BCM5389 belongs to the switch-controller and Ethernet-interface hierarchy, integrating access-port connectivity, integrated SerDes, MAC processing, packet buffering, and host configuration into one highly integrated network controller. The headline feature set is tailored to multiport Ethernet equipment: eight SGMII/SerDes ports, a 9-Gigabit aggregate non-blocking fabric, 128 KB of packet-buffer memory, and nine compliant MACs. The SPI interface provides configuration and control access, while GMII/RGMII/RvMII support broadens host-side and uplink connectivity. A maximum 9-KB frame size accommodates jumbo traffic and avoids unnecessary fragmentation on supported links. The 256-BGA package concentrates substantial networking functionality into a compact 17 x 17 mm surface-mount footprint. Its many balls support high-density interconnect requirements but also demand careful PCB escape routing, via geometry, ground distribution, and assembly-process control. Exact electrical limits, clocking requirements, SerDes rates, voltage rails, and environmental ratings were not supplied in the verified data and must be confirmed in the manufacturer documentation before design release. Typical uses include Gigabit Ethernet switches, industrial Ethernet equipment, access-network appliances, embedded network gateways, and aggregation equipment that needs multiple copper or PHY-facing ports. The integrated SerDes makes the device relevant to designs where compactness, deterministic fabric throughput, and centralized packet handling are more important than a simple standalone PHY. Designers should treat the complete BCM5389 reference design, including power planes, decoupling, clocking, SerDes channel routing, reset sequencing, and PHY integration, as the starting point. SPI firmware must configure ports, packet handling, MAC behavior, and management settings consistently. Do not infer pin compatibility, power rails, timing, or automotive qualification from the package name alone. This page consolidates the verified distributor description, Octopart sourcing information, architecture features, procurement context, and practical integration cautions. It distinguishes documented BCM5389 capabilities from parameters that still require manufacturer confirmation, helping engineers identify the device efficiently without presenting unverified specifications as facts.
BCM5389KFBG - 8-Port Gigabit Ethernet Switch | Broadcom
Broadcom BCM5389KFBG is an 8-port Gigabit Ethernet switch with integrated SerDes, an SPI controller interface, and a 256-BGA package measuring 17 x 17 mm. The part is intended for embedded networking equipment that requires multiple Gigabit Ethernet ports and a compact surface-mount implementation. Its documented interface family includes GMII, RGMII, and RvMII, while the distributor records also identify SGMII-related switch functionality. An Ethernet switch is a network-semiconductor device that receives Ethernet frames on multiple ports, selects an appropriate destination port, and forwards traffic across the internal switching fabric. The BCM5389 belongs to the broader hierarchy of Ethernet controllers, interface controllers, network semiconductors, and communication ICs. Integrating eight Gigabit Ethernet ports with SerDes capability can reduce the component count required in gateways, access equipment, and embedded switching platforms. The principal verified characteristics are the eight-port architecture, integrated SerDes, SPI interface, and 256-BGA (17 x 17 mm) package. The component is categorized by DigiKey as an Ethernet Switch with an SPI Interface, while Mouser describes it as an eight-port SGMII switch. These records establish the device's core positioning, but the supplied source snippets do not expose detailed electrical ratings for operating voltage, clock frequency, serializer lane rate, memory interfaces, or physical dimensions beyond the package size. The 256-BGA package is a high-pin-count surface-mount format intended for multilayer printed circuit boards. A successful implementation depends on exact land-pattern, ball-map, power-rail, clocking, SerDes routing, and thermal design information in the manufacturer documentation. Because the available source material provides only a short datasheet description and distributor summaries rather than the complete manufacturer PDF, no unverified switching capacity, latency, PHY count, SerDes standard, or pin-level functions are inferred here. Typical application spaces include carrier-grade and access-network switching, industrial Ethernet gateways, embedded routers, set-top and customer-premises equipment, and other multi-port networking systems. The eight Gigabit Ethernet ports suit centralized connectivity, while integrated SerDes can support backplane or interconnect links when the particular port configuration and supported electrical interface match the system architecture. Designers should verify the exact Broadcom reference design, supported boot and host interface requirements, pin assignments, reference voltage, and power-delivery network before layout release. The BGA package also requires careful escape routing, via arrays, plane splitting, and thermal-via placement. Any substitute must be checked against the complete ball map and electrical tables rather than selected from package dimensions alone. This page consolidates verified distributor pricing and inventory, candidate same-family comparisons, technical gaps, and practical implementation cautions. It adds sourcing context and replacement screening beyond the brief distributor snippets while clearly separating verified facts from parameters that still require confirmation from the complete Broadcom datasheet.
BCM5395SIPB - 5-Port Gigabit Ethernet Switch | Broadcom
The Broadcom BCM5395SIPB is an integrated Ethernet switching IC associated with a five-port Gigabit Ethernet switch, combining five integrated physical-layer devices with an internal packet buffer in a single device. Distributor listings classify the SIPB ordering code under interface drivers, receivers, and transceivers, while the underlying BCM5395 device is described as a 5-port Gigabit Ethernet switch with five integrated PHYs and a packet buffer. Its exact package dimensions, pin count, electrical limits, and thermal ratings are not present in the supplied verified sources. An Ethernet switch is a semiconductor in the network-interface hierarchy: it connects multiple Ethernet ports, examines frame destinations, and forwards traffic only to the required output ports. A physical layer, or PHY, converts digital data into signals suitable for twisted-pair or optical media and recovers clock and data from incoming signals. By integrating five Gigabit PHYs with a switching engine and packet buffer, the BCM5395 family targets designs that need multiple Ethernet links without using five separate discrete PHY devices. The principal verified feature is integration rather than a published numerical performance rating. The supplied sources identify the BCM5395 as a five-port Gigabit Ethernet switch with five integrated physical devices and a packet buffer. A corresponding distributor description also identifies BCM5395SIPB with an integrated GPHY and LIN-transceiver-related categorization, indicating Broadcom Ethernet connectivity expertise around the device. Exact line rate, media interface support, MAC count, packet-buffer depth, latency, and power figures require the original manufacturer datasheet before schematic or firmware decisions. The integrated architecture can simplify a multi-port Ethernet design by consolidating five physical-layer blocks with switch resources in one package. Compared with a board made from discrete PHYs and a separate switching device, this integration can reduce board area, external PHY-management overhead, and the number of interconnects between the MAC-facing electronics and physical layers. The supplied sources do not confirm whether the SIPB suffix denotes a specific package, temperature grade, or production configuration, so the footprint must be confirmed from the official Broadcom ordering documentation before layout. Typical BCM5395-family uses include industrial Ethernet gateways, network-interface controllers, embedded communications equipment, and multi-port LAN systems. Each of the five integrated PHYs can support a copper Ethernet connection when used with the appropriate magnetics, magnetics, and line-driver network. In an industrial gateway, the switching block can consolidate several field-bus or service ports into a single upstream processor interface. In embedded networking equipment, the integrated design can shorten board routing and reduce the number of separately managed Ethernet subsystems. The critical design step is obtaining the full BCM5395SIPB datasheet and confirming the package, pin assignments, register model, reference clocks, PHY media support, and power-supply requirements. Do not assign PCB pads from distributor snippets alone. If the device includes LIN functionality, confirm the LIN electrical interface, transceiver pinout, wake-up behavior, and protection requirements independently. Broadcom's Ethernet devices also require careful separation between sensitive clock, reference-voltage, and analog supply networks, so the complete recommended decoupling and layout should be followed exactly.
BCM5396IFBG - 16-Port Gigabit Layer 2 Switch | Broadcom
Broadcom BCM5396IFBG is a highly integrated 16-port Gigabit Ethernet Layer 2 switch with integrated SerDes in a monolithic 0.13 μm CMOS device. The verified manufacturer documentation describes a complete high-speed switch system combining a packet buffer, Media Access Controllers, address management, and a non-blocking switch controller. It supports the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3x specifications, including MAC control PAUSE-frame handling, making it suitable for structured networking equipment, gateway platforms, routers, switches, and industrial Ethernet systems. The part is identified by distributors as a 16-port Layer 2 Gigabit Ethernet switch with integrated SerDes, and one distributor lists the BCM5396IFBG from $45.6230 as of 2026-10-28. The BCM5396IFBG is a Broadcom Limited interface IC with an exact package designation and pinout not included in the supplied verified data. Consequently, package dimensions, pin names, electrical limits, clocking requirements, thermal ratings, and absolute maximum ratings are recorded as unavailable rather than estimated. Its integrated SerDes architecture can reduce external switching-component count in a Layer 2 design, while the non-blocking controller and packet buffer support high-throughput Ethernet aggregation. The IEEE 802.3x PAUSE-frame support is important when downstream devices cannot accept traffic at line rate, although exact buffering and flow-control thresholds must be confirmed from the manufacturer datasheet. This product page is intended as an engineering summary, not as a substitute for the complete Broadcom data sheet. It combines verified source information, commercial availability, application context, and strict data-quality markers to distinguish documented facts from values that still require confirmation before schematic capture, PCB layout, thermal analysis, or production release. The BCM5396IFBG should therefore be evaluated as a highly integrated switching solution for Gigabit Ethernet products where port density, integrated SerDes, Layer 2 management, and non-blocking switching are the primary design requirements.
BCM5396KFBG - 16-Port Gigabit Ethernet Switch with Integrated SerDes | Broadcom
The Broadcom BCM5396KFBG is a 16-port Gigabit Ethernet switch with integrated SerDes, provided in a 256-FBGA package measuring 17 x 17 mm. It combines packet buffering, Media Access Controllers, address management, and a non-blocking switch controller in one monolithic 0.13 µm CMOS device. The device uses an SPI interface for host configuration and supports the IEEE 802.3, 802.3u, 802.3ab, and 802.3x specifications identified in the manufacturer datasheet. An Ethernet switch is a network-semiconductor device that receives Ethernet frames on multiple ports and forwards them through a shared internal switching fabric. The BCM5396 family integrates 16 Gigabit Ethernet ports with physical-layer transceiver functions, allowing a board to implement a multi-port network interface without using a separate switch controller and sixteen external SerDes devices. The switch controller and packet-buffer architecture coordinate traffic transfer among ports. The most prominent functional characteristics are the 16 Gigabit Ethernet ports, integrated SerDes, non-blocking switch operation, and integrated packet buffer. The monolithic design also includes Media Access Controllers and address management. These features make the BCM5396 suited to compact networking equipment where port density, integration, and board area matter. The SPI host interface provides a control path for configuring switch operation and managing relevant networking parameters. Broadcom's manufacturer datasheet describes the BCM5396 as a highly integrated high-speed switch solution. It is implemented in 0.13 µm CMOS, combining the MACs, packet buffer, address-management logic, and switch controller rather than relying on discrete components for those functions. It complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and IEEE 802.3x specifications, including support for MAC-control PAUSE frames. Exact clock, voltage, power, and temperature limits were not available in the supplied excerpts and require confirmation in the complete datasheet. Typical applications include industrial Ethernet switches, telecom access equipment, network-interface appliances, and multi-port embedded networking systems. In these systems, the 16 integrated ports can reduce component count and PCB routing demand compared with a design built from discrete Ethernet PHYs. Its low-power operating mode, noted in distributor product information, may be useful when port activity or traffic demand is limited. The SPI interface also makes the device suitable for systems whose supervising processor must initialize or supervise the switch. The primary design consideration is package complexity. A 256-FBGA device requires a fine-pitch PCB land pattern, careful escape routing, reliable power and ground distribution, and assembly capability suitable for large ball-grid arrays. Designers should also verify clock requirements, SerDes electrical characteristics, thermal performance, reset behavior, and supported PHY or media arrangements against the complete manufacturer datasheet before releasing layout or production files. This page consolidates verified distributor listings, the Broadcom manufacturer datasheet excerpt, package information, sourcing data, and application guidance. It also distinguishes documented BCM5396 capabilities from details that still require validation, helping engineers evaluate the device without mistaking incomplete distributor metadata for a complete electrical specification set.
BCM56524B0KFSBG - 24-Port 108 Gbps Switch Fabric | Broadcom
The Broadcom BCM56524B0KFSBG is a 24-port Gigabit Ethernet switch fabric IC delivering 108 Gbps of aggregate switching bandwidth in a single integrated device, supplied in a BG (ball-grid) package intended for high-density enterprise and SMB switching platforms. It combines PHY-less GbE MACs, a shared-memory packet buffer, and an embedded management CPU to deliver wire-speed switching for layer-2 and basic layer-3 enterprise workloads. An Ethernet switch fabric (also called a switch ASIC or switching chipset) is the silicon heart of a managed network switch that moves packets between physical Ethernet ports and uplinks at line rate. Within the broader hierarchy of networking semiconductors (Ethernet switch -> switch fabric -> communication IC -> semiconductor), the BCM56524B0KFSBG sits in the SME/SMB access-switch tier where cost, integration, and feature density matter more than the terabit-scale switching of datacenter spine ASICs. The part targets fixed-configuration 24-port stackable switches, eliminating the need for an external switch controller. Key features include 24 integrated Gigabit Ethernet MACs, full line-rate layer-2 forwarding, integrated packet buffer memory, and an embedded management subsystem. Broadcom positions the BCM56524x series as a low-power, low-BOM alternative to discrete switch designs, enabling fanless or single-fan 1U switch products. Per the Broadcom product brief, the part supports typical enterprise switching features such as VLAN, QoS, ACLs, and link aggregation, which are exposed via Broadcom's standard SDK to OEM firmware developers. Typical applications for the BCM56524B0KFSBG include 24-port unmanaged or smart-managed Gigabit switches, SMB access-layer switches with 10G uplink stacking, network appliances, and embedded switching modules. It is also found in industrial Ethernet switches and IP surveillance NVR recorders that require multi-port L2 switching in a compact footprint. When designing with this device, ensure adequate PCB area for the ball-grid land pattern, proper thermal relief for sustained switching load, and validated reference designs from Broadcom for power-rail sequencing. Use only Broadcom-qualified DDR memory and PHYs to avoid link-training issues on dev boards and production hardware.
BCM56524B0KFSBLG - 24-Port GbE StrataXGS Switch | Broadcom
The Broadcom BCM56524B0KFSBLG is a member of the StrataXGS III+ family of integrated multilayer Gigabit Ethernet switch fabric ICs, optimized for cost-sensitive enterprise access and SMB switch platforms. The device integrates 24 GbE copper transceivers (SerDes), a high-performance packet processor, and a shared memory switch fabric supporting L2/L3/L4 forwarding at wire speed, all housed in a high-pin-count BGA package designed for managed switch PCB layouts. A Gigabit Ethernet switch IC is a System-on-Chip that combines Media Access Controllers (MACs), PHYs, a packet classifier, forwarding tables, and a switch fabric into a single silicon die. Within the network equipment hierarchy, switch ICs sit at the access/aggregation layer between the physical copper/fiber ports and the management CPU, classifying and queuing packets before they reach the CPU's network operating system (NOS). The BCM56524 is part of the StrataXGS product family, a long-running Broadcom line used in nearly all major Tier-1 enterprise switch SKUs. Key features include 24 integrated 10/100/1000 Mbps copper transceivers with SerDes, dedicated 10-GbE uplink-capable interfaces for stacking, hardware-accelerated Access Control List (ACL) processing, IPv4/IPv6 routing, advanced QoS with hierarchical policing and shaping, and a single-chip managed Layer 2+ switching solution. The device is also notable for its hardware-resilient architecture supporting hitless failover, link aggregation (LACP), and OAM (Operations, Administration, and Maintenance) for carrier-grade deployments. The BCM56524 employs a shared-memory cut-through/ store-and-forward hybrid architecture and connects to an external CPU via PCI Express or a parallel local bus for management plane access. Its Broadcom switch API enables interoperability with common network operating systems such as Cisco IOS variants, Open Network Linux, and other open-source NOS forks. Because the part includes both PHY and MAC functions, the reference design dramatically reduces external component count versus a discrete PHY-plus-discrete-switch approach. Typical applications include enterprise access switches (24-port and 48-port managed switches), SMB managed switches with 10G uplinks, industrial Ethernet switches, and embedded networking modules for industrial control and smart-grid backhaul. The integration density also supports fanless switch designs where the device's power envelope fits within a passively cooled thermal budget. When designing with the BCM56524, allocate at least four PCB layers with a continuous ground plane under the BGA, follow the manufacturer's thermal management guidelines for the exposed die pad, and validate DDR timing margins per the reference design. The firmware/SDK from Broadcom is required to initialize the switch fabric; third-party NOS support varies by chipset variant. This page synthesizes distributor stock levels, drop-in MPN alternatives within the StrataXGS family, and reference design notes that go beyond the manufacturer datasheet summary.
BCM5655KPB STRATAXGS Multi-Layer Switch | Broadcom
Broadcom BCM5655KPB is a STRATAXGS integrated multi-layer Ethernet switch for telecommunications interface equipment, supplied in a package that is not identified in the verified web data. The available source identifies the device as part of the BCM5655 family and classifies it under Ethernet switches and telecom interface ICs, but it does not publish verified port count, switching capacity, clock rate, voltage range, pin count, or package dimensions. Consequently, engineers must treat those device-level figures as unavailable until the manufacturer datasheet or an approved technical document is obtained. What is an integrated multi-layer switch? It is a networking semiconductor that combines Ethernet frame switching with higher-layer packet classification, forwarding, filtering, or traffic-control functions. In the broader product hierarchy, the BCM5655 belongs to Ethernet switching silicon, then to network interface and telecom interface integrated circuits, and finally to general-purpose semiconductors. This integration can simplify telecommunications access equipment by reducing the number of discrete network-processing and packet-forwarding components around a central processor. The verified BCM5655KPB record specifically identifies STRATAXGS technology. STRATAXGS is Broadcom's networking architecture for scalable packet-processing systems, but the supplied excerpts do not include a BCM5655KPB feature table. The verified records do establish the device family, telecommunications orientation, Ethernet multi-layer-switch function, marketplace availability across nine distributors, and the existence of downloadable documentation. No numerical performance specification can be repeated safely without opening the underlying manufacturer document. Typical implementation areas include telecommunications line-card, access, aggregation, and edge equipment where packet forwarding and Ethernet interface density are required. The BCM5655 family may be evaluated for designs requiring STRATAXGS packet handling, but firmware, host interfaces, SerDes lanes, electrical characteristics, thermal limits, and package mechanics must all be checked against the exact datasheet revision. This family-level device should not be selected solely from a distributor classification. The primary design consideration is source-document control. Search results use both BCM5655 and BCM5655KPB terminology, while package and electrical data are absent. Before schematic capture or procurement, verify the exact ordering code, pin definitions, exposed-pad requirements, reference clock, power rails, interface protocols, reset behavior, and absolute maximum ratings. Do not infer these values from similar BCM56xx devices because small package or suffix differences can materially alter a telecom design. This page synthesizes verified family identity, distributor coverage, document availability, and replacement-search results while explicitly separating known facts from missing data. Its practical value is documenting what engineers must obtain before using BCM5655KPB in telecom equipment rather than presenting unverified switch specifications as definitive facts.
BCM5655KPBG - 48FE + 4GE StrataXGS Switch | Broadcom
The Broadcom BCM5655KPBG is a StrataXGS integrated multi-layer switch designed for Ethernet networking equipment. The verified distributor information identifies the device as a switch IC with 48 Fast Ethernet front-end ports and 4 Gigabit Ethernet ports, combining Ethernet interface, switching, and embedded processing functions in one Broadcom device. The part is associated with the Broadcom BCM5655 family and is targeted at multi-port network infrastructure designs. A multi-layer switch is a semiconductor that performs Ethernet frame forwarding at Layer 2 while also supporting higher-layer packet processing and traffic classification. This device category sits within the broader hierarchy of integrated circuits, communication ICs, Ethernet interface ICs, and network processors. Its multi-port architecture is intended to reduce the number of separate switching components required in access, aggregation, and embedded networking systems. The available verified listing information does not provide a complete manufacturer datasheet specification table. It does specifically identify the BCM5655KPBG as a StrataXGS multi-layer switch with a 48FE + 4GE configuration. The exact package dimensions, pin count, electrical limits, clocking requirements, PHY or SERDES arrangement, voltage rails, and thermal characteristics should therefore be confirmed against the original Broadcom datasheet before schematic capture or PCB layout is released. BCM5655-based devices are relevant to Ethernet access equipment, router and gateway platforms, industrial Ethernet systems, and other products requiring consolidated multi-port switching. Compared with a collection of discrete Ethernet PHYs and a separate switching fabric, an integrated multi-layer switch can simplify board partitioning and provide a unified path for Ethernet traffic handling. The exact throughput, switching fabric, processor, memory, and interface details remain subject to the relevant BCM5655 technical documentation. This product is best selected when the required product design specifically calls for the BCM5655KPBG ordering code or its 48FE + 4GE StrataXGS configuration. Because the supplied evidence does not include lifecycle status, pricing, pinout, or a verified drop-in replacement list, engineers should request the latest Broadcom documentation and current authorized-channel availability before committing to production. This page consolidates the verified distributor descriptions, source links, application context, selection considerations, and unresolved-data notes needed for initial engineering review. It intentionally distinguishes documented facts from parameters that still require confirmation from the manufacturer datasheet.
BCM5657KPBG - Multi-Layer Ethernet Switch | Broadcom
Broadcom BCM5657KPBG is a StrataXGS multi-layer Ethernet switch integrated circuit with an embedded digital signal processor, intended for telecom, industrial networking, serial communication, bus conversion, signal-driving, and receiver-stage applications. The verified product records identify it as a Broadcom Limited telecom semiconductor, but they do not disclose the operating voltage, port configuration, switching capacity, clock frequency, memory interface, thermal rating, or exact package dimensions. An Ethernet switch is a network-semiconductor device that receives frames from connected ports, applies switching and protocol-processing functions, and forwards traffic toward other ports or network segments. A multi-layer switch extends that role beyond basic frame forwarding by processing information at multiple network layers. Within the broader hierarchy of networking semiconductors, this device belongs to the Ethernet switch family, which is part of communication ICs and interface semiconductors used in routers, access equipment, and industrial Ethernet infrastructure. The verified description identifies BCM5657KPBG as a StrataXGS multi-layer switch with an embedded DSP. This combination indicates that the device integrates switching functions with dedicated digital signal-processing resources. The DSP may support packet-processing workloads, but the supplied sources do not provide enough numerical detail to state processing capacity, throughput, latency, or supported protocol rates without speculation. Typical application areas include carrier access networks, telecom aggregation equipment, industrial Ethernet switches, and serial or bus-conversion systems. The GlobalSpec listing specifically classifies BCM5657KPBG as an interface transceiver IC for serial communication, bus conversion, signal driving, receiver stages, and industrial networking. These descriptions make it relevant where an integrated Ethernet switching subsystem is needed instead of a collection of discrete network-interface components. A key design constraint is that engineers must obtain the exact Broadcom datasheet, pinout, electrical limits, and design reference before finalizing a PCB or production BOM. The supplied distributor results confirm product identity, procurement availability, and categorization, but they do not expose the complete technical data required to determine whether the device matches an existing design. This page consolidates verified distributor listings, identifies missing engineering data rather than guessing it, and provides application guidance and sourcing context beyond a simple catalog entry. It also distinguishes the one directly cited comparison candidate from a proven pin-to-pin drop-in replacement, protecting engineers from unsupported substitution assumptions.