集成电路

PIC16C923T-04I/L

PIC16C923T-04I/L - 8-bit OTP MCU, 7KB EPROM, LCD Driver | Microchip

The Microchip Technology PIC16C923T-04I/L is an 8-bit CMOS OTP-based microcontroller with an integrated LCD driver, 7KB of one-time-programmable EPROM program memory, 176 bytes of SRAM, and 52 general-purpose I/O pins, housed in a 68-pin PLCC (J-lead) surface-mount package rated for industrial temperature operation (-40C to +85C). What is an OTP microcontroller? An OTP (One-Time-Programmable) microcontroller embeds EPROM program memory that can be programmed once by the user with a device programmer and cannot be electrically erased. OTP sits in the broader taxonomy microcontroller -> embedded processor -> integrated circuit -> semiconductor, and the PIC16C923 belongs to Microchip's mid-range PIC16C family - a class of 8-bit RISC MCUs designed for low-power embedded control with peripheral integration. The 'T' suffix denotes tape-and-reel packaging, '-04I' denotes a 4 MHz maximum oscillator and industrial temperature grade, and '/L' denotes a 68-pin PLCC J-lead package. Key features include 35 single-word RISC instructions (most executed in a single 200 ns instruction cycle at 20 MHz, or 500 ns at 4 MHz), an integrated LCD driver capable of multiplexing up to 4 common and 32 segment signals (128-segment LCD support), 8-level hardware stack, 14-bit wide instruction word, 8 special-function hardware registers, and serial communication peripherals (I2C/SPI). The industrial temperature grade (-40C to +85C) and integrated LCD controller reduce BOM cost for any product requiring an alphanumeric or numeric glass display. Architecturally, the PIC16C923 uses a Harvard RISC core with separated program (14-bit) and data (8-bit) buses, a 14-bit instruction word for compact code density, and a hardware multiply-by-constant routine. The integrated LCD module includes dedicated charge-pump bias generation, programmable frame frequency, and shared segment driver lines with GPIO, allowing the same pin to drive either a logic-level load or an LCD segment based on configuration. Typical applications include white-goods front panels (washing machines, microwave ovens, thermostats), industrial control HMIs, medical instrument displays, point-of-sale terminals with numeric keypads and character LCDs, automotive dashboard segments, and any battery-powered metering device that needs a multi-digit segmented LCD readout. The industrial temperature grade extends these into outdoor metering and HVAC controls. A key design consideration is that the PIC16C923 is OTP - field firmware updates are impossible; production units cannot be re-programmed. Designers building a serviceable product should evaluate the Flash-based PIC16F946 (same pinout, same peripherals, Flash memory) as a forward-compatible alternative. Verify the integrated LCD driver segment count (typically 4x32 = 128 segments max) against your glass display before finalizing the BOM. This page synthesizes authorized-distributor pricing, drop-in alternatives, and application guidance not consolidated in the Microchip datasheet, helping procurement and engineering teams source and substitute this part accurately.

询价联系我们

PIC16C923T-04I/PT

PIC16C923T-04I/PT - 8-Bit OTP MCU with LCD Driver | Microchip

The Microchip Technology PIC16C923T-04I/PT is an 8-bit CMOS OTP-based microcontroller with integrated LCD driver, packaged in a 64-pin TQFP (10x10 mm) and operating at 4 MHz instruction frequency. It integrates 7 KB (4K x 14) of OTP program memory, 176 bytes of RAM, 52 digital I/O pins, and an on-chip LCD driver, making it a single-chip solution for human-machine interface (HMI) subsystems. According to the Microchip PIC16C923 datasheet, the part operates from 2.0 V to 5.5 V across the industrial temperature range (-40 C to +85 C). What is an OTP microcontroller? An OTP (One-Time Programmable) microcontroller contains EPROM-based non-volatile program memory that can be written once using a device programmer. Unlike flash-based MCUs, OTP parts cannot be reprogrammed in-circuit, which makes them ideal for high-volume cost-sensitive applications where firmware is final and stable. The PIC16C923 belongs to the PIC16C family of Microchip's PIC architecture, sitting in the hierarchy: PIC16C923 -> PIC16C family -> 8-bit PIC -> PIC microcontroller -> Microcontroller IC -> semiconductor. Key features include a 4 MHz maximum clock with 500 ns instruction cycle, integrated LCD segment driver (up to 128 segments typical), two 8-bit timers plus one 16-bit timer, 10-bit ADC (depending on variant), I2C/SPI/USART communication peripherals, and a watchdog timer for reliable operation. The 64-pin TQFP package exposes 52 general-purpose I/O lines plus dedicated LCD segment pins, allowing direct drive of alphanumeric or graphic LCD glass without an external driver. Architecturally, the PIC16C923T-04I/PT uses a Harvard RISC core with only 35 single-word instructions, an 8-level hardware stack, and separate program/data buses. The 'T' suffix denotes Tape & Reel packaging, '04' denotes 4 MHz speed grade, 'I' denotes industrial temperature grade, and '/PT' denotes the 64-pin TQFP package. The integrated LCD controller supports multiple bias modes and frame frequencies, eliminating external charge-pump or segment-driver ICs in many designs. Typical applications include industrial control panels with LCD displays, point-of-sale terminals, metering and instrumentation front panels, white-goods and appliance user interfaces, and embedded operator-interface HMIs. The wide voltage range and integrated LCD driver make it particularly well-suited to mains- or battery-powered consumer appliances and industrial equipment with integrated displays. When designing with this part, ensure the OTP memory programming step is planned into manufacturing: OTP parts cannot be firmware-updated. Provide adequate decoupling (0.1 uF + 10 uF bulk) near VDD/AVDD pins, route the LCD segment lines with similar trace lengths to keep segment contrast uniform, and respect the in-circuit programming voltage requirements of the EPROM cell. The 'I' industrial temperature grade allows deployment in -40 C to +85 C environments without additional thermal qualification. This page synthesizes distributor pricing, drop-in same-package alternatives (including PIC16C923-04I/PT, PIC16C924, PIC16C925, PIC16C926 family members), and practical design notes not consolidated in a single manufacturer document.

询价联系我们

PIC16C923T-08/L

PIC16C923T-08/L - 8-Bit OTP MCU w/ LCD Driver, 7KB | Microchip

The Microchip Technology PIC16C923T-08/L is an 8-bit CMOS OTP-based microcontroller with an integrated LCD driver, delivering 500 ns instruction execution in a 68-pin PLCC (J-lead, T/R) package. It combines 7 KB of on-chip EPROM program memory, 192 bytes of general-purpose SRAM, and an LCD driver capable of multiplexing up to 4 commons and 32 segments (128 segments total in 1:32 mux mode), making it a single-chip solution for low-power human-machine interface designs. A microcontroller (MCU) is a single-chip computer containing a CPU, program and data memory, I/O peripherals, and often specialized interfaces such as LCD controllers, ADC, or communications. The PIC16C9xx family belongs to Microchip's PIC16 mid-range 8-bit RISC architecture, which executes one instruction per instruction cycle (4 oscillator cycles) and exposes only 35 single-word instructions. MCUs sit one level below the broader category of microprocessors in the system-on-chip hierarchy: LDO -> power management IC -> microcontroller -> embedded system -> end product. The PIC16C923 in particular is positioned at the top of the PIC16C LCD-driver family for applications that need a higher-segment LCD count without moving to the PIC17 or PIC18 architectures. Key features include a 7 KB EPROM program memory (14-bit instruction word), 192-byte SRAM data memory, 33 general-purpose I/O pins, an integrated LCD driver supporting static through 1:32 multiplex, two 8-bit timer/counters, a watchdog timer with its own on-chip RC oscillator, and a programmable brown-out reset. The device operates across 2.5 V to 6.0 V with a maximum clock of 8 MHz (8 MHz oscillator, 2 MHz instruction rate, 500 ns instruction cycle). All I/O pins are TTL/CMOS-compatible and the part uses an open-drain LCD segment architecture suitable for direct drive of standard 3 V and 5 V LCD glass. Architecturally, the PIC16C923 is built on Microchip's mid-range core with a 14-bit program word and an 8-bit data path. The EPROM-based program memory is windowed for prototype development and one-time-programmable (OTP) in production. The integrated charge-pump and bias-generator free the LCD section from external bias resistors; the designer only needs to supply a low-power LCD-compatible external capacitor network. The brown-out detector and power-on reset provide predictable startup, while the watchdog timer with a dedicated RC oscillator runs independently of the main crystal, so a stalled main clock cannot prevent system recovery. Typical applications include battery-powered thermostats and HVAC controllers, gas and water meters, point-of-sale terminals, handheld instruments with character or graphic LCDs, medical infusion pumps, white-goods user interfaces (washing machines, ovens), automotive interior controls (non-AEC-Q100 use cases), and industrial operator panels. The integrated LCD driver eliminates the need for an external LCD controller, reducing both BOM cost and PCB area. When designing with the PIC16C923, allocate the EPROM budget carefully: 7 KB allows roughly 4000 single-word instructions, which is sufficient for typical mid-range control + LCD tasks but tight for protocol stacks. Use Microchip's MPASM assembler or the MPLAB XC8 C compiler; the `-/L` package suffix denotes the 68-pin PLCC J-lead variant supplied in Tape and Reel. Always include decoupling (100 nF + 10 uF) within 10 mm of VDD/AVDD/VSS, and confirm that the LCD glass segment count does not exceed 32x4 before committing to the BOM. This page synthesizes distributor pricing, drop-in same-package alternatives (Tape & Reel variants and OTP/EPROM speed grades), and practical design notes that complement - rather than duplicate - the Microchip datasheet.

询价联系我们

PIC16C923T-08/PT

PIC16C923T-08/PT - 8-bit CMOS MCU with LCD Driver, 8MHz, TQFP-64 | Microchip

The Microchip Technology PIC16C923T-08/PT is an 8-bit CMOS RISC microcontroller with an integrated LCD driver module, packaged in a 64-pin TQFP (TFQFP). It operates up to 8 MHz with 500 ns instruction execution, integrates 4K x 14 words of OTP/EPROM program memory, 176 x 8 bytes of general-purpose SRAM, and offers 52 digital I/O pins for embedded applications that also require a direct glass LCD interface. The device is part of the PIC16C9XX family of mid-range microcontrollers, distinguished by an on-chip LCD driver that can directly multiplex up to a 4x32-segment display. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, program memory, and peripherals such as timers, communication interfaces, and I/O on a single die. The PIC16C923 belongs to the hypernym hierarchy: 8-bit microcontroller -> RISC microcontroller -> CMOS microcontroller -> embedded controller -> semiconductor. Its mid-range PIC architecture with 35 single-word instructions makes assembly programming compact and predictable, while C compilers from Microchip (MPLAB XC8) target the same core for higher-level development. Key features include 4K x 14 EPROM/OTP program memory, 176 bytes of data RAM, 52 I/O pins, an integrated LCD driver supporting up to 4 common and 32 segment lines, an 8-bit timer/counter with 8-bit prescaler, a Watchdog Timer with its own on-chip RC oscillator, and three I/O ports (PORTA, PORTB, PORTC, PORTD, PORTE) multiplexed with LCD segment and common signals. The part operates from 4.5 V to 6.0 V and supports commercial temperature grades. Architecturally, the PIC16C923 uses a Harvard-style 14-bit instruction word with separate program and data buses, an 8-level deep hardware stack, and direct/indirect addressing modes. The LCD module shares pins with PORTC/PORTD/PORTE, allowing the same IC to drive character or segment displays without an external LCD controller. CMOS EPROM process technology enables low power operation with all instructions executing in a single 500 ns cycle (except program branches which take two cycles). Typical applications include industrial control panels with character LCDs, white goods with integrated displays, handheld instrumentation with segment displays, point-of-sale terminals, automotive dashboard segments, and consumer appliances where the LCD driver integration eliminates an external LCD controller and reduces BOM cost. The wide 52-pin I/O count also supports keypad scanning and LED matrix driving. When designing with this part, evaluate OTP versus windowed (UV-erasable) PIC16C923JW variants carefully - the /PT suffix denotes the OTP/EPROM TQFP-64 production package, suitable for low-volume and pre-production builds; high-volume runs should consider migrating to the mask-ROM PIC16CR923 or the Flash-based PIC16F946/LC94x family for lower unit cost. The integrated LCD driver is the primary value proposition - if no display is needed, a smaller, cheaper mid-range PIC such as the PIC16F877A in PLCC-44 is more appropriate. This page synthesizes distributor pricing, drop-in compatible same-family PIC16C9xx alternatives, and practical design notes not aggregated on any single distributor page, providing an engineering decision framework for selecting the right MCU in the LCD-driven mid-range PIC segment.

询价联系我们

PIC16C923T-08I/L

PIC16C923T-08I/L - 8-Bit OTP MCU 7KB 52 I/O 68-PLCC | Microchip

The Microchip Technology PIC16C923T-08I/L is an 8-bit CMOS OTP-based microcontroller in the PIC16C family, offering 7KB of on-chip EPROM program memory, 176 bytes of SRAM, and 52 digital I/O pins. It executes instructions in a 500 ns single-cycle time at an 8 MHz oscillator input, packs the PIC RISC architecture into a 68-pin PLCC (Plastic Leaded Chip Carrier) with J-leads, and is qualified to the industrial temperature range (-40C to +85C). According to distributor data from DigiKey, the device ships in a 68-PLCC (24.23x24.23 mm) J-lead surface-mount package and supports only 35 single-word instructions, all of which execute in a single instruction cycle except program branches. What is a PIC16C 8-bit microcontroller? An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, and peripheral set around an 8-bit data path. The PIC16C family from Microchip uses a Harvard RISC architecture with separate program and data buses, OTP (One-Time-Programmable) EPROM for code storage, and a small register file with hardware interrupts. Within the broader IC taxonomy it sits under microcontroller -> embedded MCU -> 8-bit MCU -> semiconductor. Compared with Flash-based successors (PIC16F), PIC16C OTP devices offer lower unit cost at high volume but cannot be reprogrammed in-circuit, making them best suited for mature production where firmware is locked. Key features include 4K x 14 bits of EPROM program memory (7 KB), 176 bytes of general-purpose SRAM registers, 52 bidirectional I/O pins, an 8-bit timer/counter with 8-bit prescaler, a Watchdog Timer with its own on-chip RC oscillator, and Power-on Reset / Brown-out Reset / Power-up Timer. The PIC16C923 also includes an LCD driver interface, making it one of the few PIC16C midrange parts with integrated segment-LCD support, and it operates across 2.5 V to 6.0 V VDD with low-power Sleep mode. Typical applications include industrial control panels, segment-LCD human-machine interfaces (HMIs), appliance front-panel controllers, instrumentation front-ends, and embedded automotive subsystems where firmware is fixed at production and cost is paramount. Its 52 I/O and integrated LCD drive simplify BOMs in meter and control applications by removing external LCD driver ICs. When designing with this device, note that OTP EPROM cannot be re-programmed - firmware must be 100% verified before production programming. Use the parallel programming mode for production programming, and confirm the 68-PLCC footprint supports the J-lead land pattern used in your PCB layout.

询价联系我们

PIC16C923T-08I/PT

PIC16C923T-08I/PT - 8-Bit OTP MCU w/ LCD Driver, 8MHz, TQFP-64 | Microchip

The Microchip Technology PIC16C923T-08I/PT is an 8-bit CMOS OTP-based microcontroller with 7KB (4K x 14) of on-chip EPROM program memory, integrated LCD driver hardware, and 8 general-purpose registers (SRAM), delivered in a 64-pin TQFP (PT) package with industrial temperature grade (-40C to +85C). The '08' speed suffix denotes 8 MHz maximum oscillator frequency (200 ns instruction cycle), while the 'I' suffix denotes the industrial temperature range and 'T' denotes tape-and-reel packaging. An 8-bit OTP (One-Time-Programmable) microcontroller is a non-volatile MCU whose program memory is implemented as EPROM and can be written only once after erasure by UV light. It belongs to the broader class of microcontrollers -> embedded processors -> digital ICs. The PIC16C923 specifically targets applications requiring integrated LCD glass driving, eliminating the need for an external LCD controller and reducing both BOM cost and PCB area. Key features of the PIC16C923T-08I/PT include a powerful RISC CPU with only 35 single-word instructions to learn, 500 ns instruction execution time, all single-cycle instructions except for program branches, and 8-level hardware stack. The on-chip LCD driver supports multiplexed LCD panels up to 4 common lines, while the integrated peripherals include a 5-channel 8-bit A/D converter, USART, SSP, and capture/compare/PWM modules. The PIC16C923T-08I/PT leverages CMOS EPROM process technology, giving it low power consumption characteristic of CMOS logic combined with field-programmable (one-shot) non-volatile memory. The architecture is optimized for applications where the program code is finalized during prototyping and small-to-medium production runs - the EPROM cannot be electrically erased but is reliable in the field once programmed and windowless-packaged. Typical applications include consumer appliances (washing machines, microwave ovens, climate control panels), industrial HMI panels, instrumentation with LCD readouts, point-of-sale terminals, and any battery-powered or line-powered product requiring integrated alphanumeric or segmented LCD glass driving. The combination of LCD driver, ADC, and USART in a single chip reduces external component count. When designing with this device, note that the OTP memory cannot be re-programmed - prototypes should use the JW windowed ceramic variant for development and the PT plastic TQFP for production. Adequate decoupling (100 nF ceramic plus 10 uF bulk) near VDD/AVDD/VSS pins is required for ADC accuracy, and the LCD bias generation must use the recommended external resistor ladder per the datasheet. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, enabling faster BOM decisions.

询价联系我们

PIC16C924-04/L

PIC16C924-04/L - 8-bit OTP MCU 7KB EPROM 8MHz LCD | Microchip

The Microchip Technology PIC16C924-04/L is an 8-bit RISC CMOS microcontroller built around Microchip's PIC architecture, packaged in a 68-pin PLCC (J-Lead, QCCJ) form factor with OTP EPROM program memory. It integrates an integrated LCD driver capable of driving 32 segments and 4 commons, five channels of 8-bit Analog-to-Digital converters, and a synchronous serial port configurable as 3-wire SPI or 2-wire I²C, all on a single die. The core runs at up to 4 MHz instruction frequency (200 ns instruction cycle) and operates from a 4V to 6V supply. An 8-bit microcontroller (MCU) is a small computer-on-a-chip combining a CPU, RAM, non-volatile program memory, and peripherals. The PIC family, a Harvard-architecture RISC design, sits within the broader hierarchy: MCU → microcontroller → embedded processor → semiconductor. OTP EPROM-based PIC16C parts are one-time-programmable and targeted at mature, cost-sensitive embedded products where code is finalized in production. Key features include 7 KB (4K × 14) of OTP EPROM program memory, 192 bytes of SRAM data memory, 52 digital I/O lines, a 5-channel 8-bit ADC, an LCD driver with 32 segments and 4 commons, a Pulse-Width-Modulation (PWM) module, a Watchdog Timer (WDT), Power-On Reset (POR), and brown-out detection. The synchronous serial port supports both SPI and I²C master/slave modes. The instruction set is only 35 single-word instructions, all single-cycle except branch instructions. The PIC16C924-04/L uses a high-performance RISC engine with a 14-bit instruction word, an 8-level hardware stack, and direct/indirect addressing modes. The external oscillator interface supports XT, HS, and RC modes for the /04 speed grade. Power management includes POR, brown-out reset, and a Watchdog Timer with its own on-chip RC oscillator for reliable operation. Typical applications include LCD-based human-machine interfaces, appliance control panels, industrial meters, automotive instrument clusters, and embedded control boards with text/graphical displays. The integrated LCD driver eliminates the need for an external segment driver in cost-sensitive designs, while the 5-channel ADC supports sensor monitoring. When designing with this part, note that the OTP memory means firmware must be finalized before production programming - field upgrades require a windowed (JW) package variant. For prototype work, Microchip recommends the PIC16F924 Flash-based equivalent.

询价联系我们

PIC16C924-04/PT

PIC16C924-04/PT - 8-bit 4MHz 7KB OTP MCU w/ LCD Driver | Microchip

The Microchip Technology PIC16C924-04/PT is an 8-bit CMOS RISC microcontroller with an integrated LCD driver, 7KB (4K x 14) of one-time-programmable (OTP) program memory, 176 bytes of SRAM, and 52 I/O pins, packaged in a 64-pin TQFP (10x10 mm) surface-mount form factor. The "04" speed grade runs at 4 MHz clock input (200 ns instruction cycle at 5V), with the PIC16C924 family offering 5 channels of 8-bit ADC, a synchronous serial port configurable as either SPI or I2C, and an LCD driver module capable of driving 32 segments and 4 commons (up to 128-pixel LCD panel). What is an OTP microcontroller? An OTP (One-Time-Programmable) microcontroller is a type of embedded controller whose on-chip program memory can be written exactly once after manufacture using a programming voltage, with the bit cells constructed as anti-fuse EPROM (rather than EEPROM or Flash). In the broader taxonomy, the PIC16C924 sits below EPROM-based OTP MCUs -> 8-bit microcontrollers -> microcontrollers (MCU) -> embedded controllers -> integrated circuits (ICs). The "C" suffix indicates the original CMOS/EPROM PIC16 family introduced in the early-to-mid 1990s. Key features include 35 single-word instructions (all single-cycle except branches), an 8-level deep hardware stack, four interrupt sources, two 8-bit timer/counters with prescalers, a 16-bit timer/counter, a Watchdog Timer with its own on-chip RC oscillator, and brown-out reset / power-on reset / power-up timer supervisory functions. The synchronous serial port (SSP) supports SPI (Master/Slave) and I2C (Slave) modes, easing sensor and peripheral interconnect. The LCD module supports static, 1/2, 1/3, and 1/4 duty multiplex and can source the LCD bias voltage internally. The architecture uses a Harvard design with separate program and data buses, an ALU that operates on any working register, and a 14-bit program word width - a hallmark of the mid-range PIC16 family. Power consumption is low for the era (typical supply current 1.6 mA at 4 MHz / 5V), with the device operating across 2.5V-5.5V. At 4 MHz "04" speed grade the part delivers 5 MIPS; higher "10" and "20" speed grades deliver 10 and 20 MHz respectively but share the same die and pinout. Typical applications include appliance control panels with LCD readouts, industrial instrument front panels, automotive dashboard clusters (with appropriate EMI hardening), battery charger user interfaces, HVAC thermostat displays, and consumer electronics that need a segmented LCD without a dedicated LCD controller IC. Design consideration: OTP memory is one-time programmable - firmware must be fully validated on the F1 (UV-erasable) windowed variant PIC16C924/JW or on the PIC16C924-04/P (PDIP emulator) before committing to the /PT OTP version, otherwise no firmware revisions are possible. Carefully budget the 176-byte SRAM against stack depth and buffer use, as the modest RAM is the typical bottleneck. This page synthesizes distributor pricing, drop-in alternatives (PIC16C924T-04/PT, PIC16C924-04I/PT, PIC16F914-I/PT), and practical design notes not found in the manufacturer datasheet alone.

询价联系我们

PIC16C924-04I/L

PIC16C924-04I/L - 8-bit CMOS MCU with LCD Driver, 4MHz | Microchip

The Microchip PIC16C924-04I/L is a high-performance 8-bit CMOS microcontroller with an integrated LCD driver, supplied in a 68-pin PLCC (L) package, 176 bytes of SRAM, 4K x 14-bit EPROM program memory, and 52 digital I/O lines. It executes a 14-bit instruction set at 4 MHz (200 ns instruction cycle when sourced from the 20 MHz oscillator divided by 4) and operates from a 4.5 V to 6 V supply. What is an 8-bit microcontroller with LCD driver? An 8-bit MCU with integrated LCD driver is a single-chip computer that combines a CPU, non-volatile program memory, RAM, peripherals, and a segment/common LCD controller on one die, eliminating the need for an external LCD driver IC in segment-display products. Within the broader taxonomy, the PIC16C924 belongs to the PIC16C series of OTP/EPROM-based microcontrollers, which is itself a sub-family of Microchip's PIC16 mid-range architecture, which is itself a sub-family of 8-bit Harvard-architecture microcontrollers, which fall under the category of microcontrollers (MCUs), which are a class of embedded computing semiconductor. Key features include an integrated LCD driver capable of 32 segments x 4 commons (128 segments total), a 5-channel 8-bit ADC, an SSP configurable as 3-wire SPI or 2-wire I2C, two 8-bit timers plus one 16-bit timer, a Watchdog Timer with its own on-chip RC oscillator, Power-On Reset, Brown-Out Reset, Power-Saving Sleep mode, and In-Circuit Serial Programming via two pins. The 35-instruction RISC core executes all single-cycle instructions in 500 ns (at 8 MHz oscillator) except program branches which take two cycles, and the device supports up to 8 MHz clock input. Architecturally, the PIC16C924 uses a Harvard-class RISC core with separate program (14-bit wide EPROM) and data (8-bit wide SRAM) buses, plus an 8-level deep hardware stack, allowing deterministic interrupt latency. The on-chip LCD waveform generator handles static, 1/2, 1/3, and 1/4 multiplexed glass with type-A and type-B waveforms, freeing the CPU from refresh overhead. Industrial (-40C to +85C) operating range and CMOS low-power design (typical <2 mA active, <20 uA standby) suit battery and line-powered instrument panels. Typical applications include appliance control panels (washing machines, microwaves, HVAC thermostats), instrumentation meters (multimeters, panel gauges), medical device displays (glucose meters, infusion pumps), point-of-sale terminals, and industrial operator interfaces requiring alphanumeric segment LCDs. Design tip: EPROM devices require a quartz windowed package or one-time-programmed (OTP) plastic package. For prototyping, prefer the JW windowed variant; for production, the L (PLCC) plastic OTP variant is recommended. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes not found in the original Microchip datasheet.

询价联系我们

PIC16C924-08/L

PIC16C924-08/L - 8-Bit MCU w/ LCD Driver, 7KB OTP, 68-PLCC | Microchip

The Microchip Technology PIC16C924-08/L is an 8-bit CMOS microcontroller with an integrated LCD driver, 7KB (4K x 14) of one-time-programmable (OTP) program memory, 176 bytes of SRAM, and 52 digital I/O pins, housed in a 68-pin PLCC (J-Lead) package. It executes instructions in a 500 ns instruction cycle at 8 MHz and is part of the PIC16C9xx family of LCD-driven microcontrollers. The part suffix "/L" indicates the windowless ceramic PLCC package variant rated for industrial temperature ranges. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, RAM, and configurable I/O peripherals. The PIC16C924 sits in Microchip's PIC16 mid-range family, an 8-bit RISC architecture known for its small instruction set (only 35 single-word instructions) and deterministic timing. Adding an on-chip LCD driver makes this part a category-defining solution for embedded human-machine interfaces, eliminating the need for an external LCD controller chip and reducing BOM cost and PCB area. Key features include five channels of 8-bit Analog-to-Digital conversion (ADC), a Synchronous Serial Port configurable as either 3-wire SPI or 2-wire I2C, an integrated LCD driver capable of driving 32 segments with 4 commons (up to 128 pixel control), and capture/compare/PWM peripherals. The CMOS process provides low power consumption and high noise immunity, while the 14-bit instruction word delivers compact code density. The OTP program memory is one-time-programmable, suiting production runs where firmware is finalized and cost per unit is critical. Typical applications include industrial control panels, point-of-sale terminals, medical instrumentation with graphical readouts, automotive dashboard clusters, appliance user interfaces, and metering equipment. The 52 I/O pins and 8-bit ADC simplify sensor aggregation, while the integrated LCD driver removes the need for an external controller. When designing with the PIC16C924, ensure that OTP programming is performed before final assembly (windowless PLCC cannot be UV-erased). Confirm timing budgets against the 8 MHz oscillator and the 500 ns instruction cycle, and verify the LCD bias and contrast network against the panel datasheet. This page synthesizes distributor pricing, drop-in alternatives in the same 68-PLCC footprint, and practical design notes not found in the manufacturer datasheet.

询价联系我们

PIC16C924-08/PT

PIC16C924-08/PT - 8MHz 8-Bit MCU w/ LCD Driver | Microchip

The Microchip Technology PIC16C924-08/PT is a member of the PIC16C9xx family of 8-bit CMOS OTP-based microcontrollers featuring an integrated LCD driver, 5 channels of 8-bit A/D conversion, and 52 digital I/O lines. The device executes instructions in a 200 ns single-cycle period at 8 MHz oscillator frequency, packs 7 KB (4K x 14) of one-time-programmable program memory and 176 bytes of general-purpose SRAM, and is delivered in a 64-pin TQFP (10x10 mm) package. The integrated LCD controller can drive up to 32 segments and 4 commons, allowing direct glass attachment for alphanumeric or custom-segment displays without external driver ICs. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory, working RAM, and a mix of peripheral blocks such as timers, A/D converters, communication interfaces, and I/O. The PIC16C9xx family belongs to the 8-bit PIC16C sub-family, which sits within the larger PICmicro architecture hierarchy: 8-bit MCU -> RISC microcontroller -> embedded controller -> semiconductor IC. The "C" suffix indicates an OTP (One-Time-Programmable) EPROM-based program memory variant intended for low-to-medium volume production where field re-programmability is not required. Key features of the PIC16C924 include the integrated LCD driver (32 segments x 4 commons), a 5-channel 8-bit successive-approximation ADC with input multiplexing, a synchronous serial port configurable as 3-wire SPI or 2-wire I2C, a USART for asynchronous/synchronous communication, two 8-bit timers plus one 16-bit timer with capture/compare/PWM capability, and a programmable watchdog timer with its own on-chip RC oscillator. The device supports up to 52 digital I/O pins, accommodates a wide commercial operating temperature range, and operates from a single 3.0 V to 6.0 V supply. Architecturally, the PIC16C924 uses Microchip's Harvard RISC core with separate program and data buses, a 14-bit-wide instruction word, and a hardware multiply assist. The LCD driver uses an internal charge pump and dedicated segment/commons pins with software-configurable frame frequency and bias, reducing external component count. The OTP program memory allows prototype-to-production migration on the same silicon, which simplifies BOM and qualification for low-volume industrial and consumer appliances. Typical applications include industrial control panels with segment LCDs, white-goods and home-appliance user interfaces, HVAC thermostats and metering front-panels, medical device front-end displays, automotive dashboard clusters (non-safety), POS terminals with integrated numeric keypads, and instrument-cluster readouts. The 52 I/O lines make the part suitable for keypad scanning, LED driving, and discrete control outputs alongside the LCD glass. Designers should note the part operates at 8 MHz maximum oscillator and runs each instruction in 4 oscillator cycles (200 ns at 8 MHz). Power-on reset, brown-out detect, and a watchdog timer with dedicated RC oscillator are integrated. Use decoupling capacitors of 0.1 uF near each VDD/VSS pair, route the analog AVdd/AVss pair separately, and follow Microchip's recommended PCB layout for LCD bias generation to minimize segment flicker. This page synthesizes distributor pricing across six major channels, drop-in alternative SKUs from Microchip's own PIC16C9xx family, and practical design notes not duplicated on any single manufacturer or distributor listing.

询价联系我们

PIC16C924-08I/L

PIC16C924-08I/L - 8-Bit OTP MCU w/ LCD Driver | 8MHz | 68-PLCC

The Microchip PIC16C924-08I/L is an 8-bit RISC CMOS microcontroller with an integrated LCD driver, 7 KB of OTP program memory, 176 bytes of SRAM, and 52 digital I/O pins, housed in a 68-pin PLCC (JEDEC LCC) package. It executes 35 single-word instructions at an 8 MHz clock rate, achieving a 500 ns instruction cycle for branch operations, while most instructions complete in a single 4-clock cycle. The industrial-grade "-I" suffix supports an operating temperature range of -40C to +85C. A microcontroller (MCU) is a single-chip computer containing a CPU, RAM, non-volatile program memory, and peripheral interfaces. The PIC16C924 family belongs to the PIC16C9xx mid-range lineup, which extends the standard PIC16 architecture with built-in LCD segment drivers targeting low-power human-machine interface (HMI) products such as metering, instrumentation, and appliance panels. This places the part in the broader taxonomy of microcontroller -> embedded controller -> semiconductor -> integrated circuit. Key features include 4.5 V to 6.0 V supply range, 8 MHz maximum oscillator frequency, 52 I/O pins, 4 KB (7 KB on extended parts) of OTP/EPROM program memory, a 7-channel 8-bit ADC, and an LCD driver capable of multiplexing up to 128 segments. Peripherals include one 8-bit timer, one 16-bit timer, a Watchdog Timer with its own on-chip RC oscillator, and a synchronous serial port (SSP) supporting SPI and I2C. The device uses 13-bit instructions and Harvard architecture with separate program and data buses. Typical applications include smart thermostats, utility meters, medical instrumentation, point-of-sale terminals, and consumer appliance front panels. The on-chip LCD driver removes the need for an external LCD controller, reducing BOM cost and PCB area in segments where 32 to 128 segments must be driven. Designers should note that PIC16C924 is OTP/UV-erasable and is increasingly being replaced by flash-based PIC16F equivalents for new designs. Engineers should evaluate PIC16F946 or PIC16F917 when prototyping new LCD-based products, while keeping PIC16C924 for maintenance of installed bases and legacy firmware. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not aggregated on a single manufacturer datasheet.

询价联系我们

PIC16C924-08I/PT

PIC16C924-08I/PT - 8-Bit 8MHz OTP MCU w/ LCD Driver | Microchip

The Microchip Technology PIC16C924-08I/PT is an 8-bit CMOS microcontroller with an integrated LCD driver module, delivering 8 MIPS performance at 8 MHz clock in a 64-pin TQFP (10x10 mm) package. The device integrates 7 KB of OTP program memory (4K x 14 words) and 176 bytes of general-purpose SRAM, with 52 digital I/O pins and five 8-bit ADC channels for mixed-signal embedded applications. An 8-bit microcontroller is a single-chip computer based on a CPU datapath of 8 bits, executing one byte per instruction cycle. In the broader taxonomy, it sits under microprocessor -> microcontroller -> embedded controller -> semiconductor IC, and is widely used in cost-sensitive applications where deterministic real-time response and low power are more important than raw compute throughput. The PIC16CXXX mid-range family used in PIC16C924 provides a RISC instruction set of only 35 single-word instructions, allowing most routines to fit in a single instruction cycle (500 ns at 8 MHz). Key features include the on-chip LCD driver capable of driving 32 segments and 4 commons (up to 128 segment pixels), a synchronous serial port configurable as 3-wire SPI or 2-wire I2C, and 5 channels of 8-bit A/D conversion. Two 8-bit timer/counters plus one 16-bit timer/counter provide flexible event timing, and a watchdog timer with on-chip RC oscillator improves system reliability. The -08 speed grade specifies an 8 MHz maximum oscillator, while the -I industrial suffix guarantees -40C to +85C operation. Architecturally, the PIC16C924 uses a Harvard-style modified RISC core with separate program and data buses, a 14-bit instruction word, and a hardware multiplier not present. Its 64-pin TQFP package exposes 52 I/O pins arranged as 6 ports (PORTA through PORTG, partially populated), allowing direct interface with LCD glass, keypads, and analog sensors without external glue logic. Typical applications include industrial LCD-display control panels, instrumentation front-ends, point-of-sale terminals, smart thermostats, white-goods control boards, and medical monitors with integrated displays. The combination of LCD driver, ADC, and ample I/O on a single die makes it ideal for human-machine interface (HMI) subsystems. When designing with this part, plan for OTP programming: the OTP memory cannot be erased electrically, so firmware must be fully validated before committing. Decouple VDD/VSS pairs close to the package, use guard traces around the LCD segment outputs to reduce ghosting, and ensure segment-pin assignments follow the datasheet table to minimize software overhead. This page synthesizes live distributor pricing, parametric drop-in alternatives, and practical PCB design notes that go beyond the manufacturer datasheet.

询价联系我们

PIC16C924/CL

PIC16C924/CL - 8MHz 8-Bit MCU w/ LCD Driver | 68-CLCC | Microchip

The Microchip Technology PIC16C924/CL is an 8-bit CMOS OTP-based microcontroller in the PIC16C family, integrating an LCD driver module capable of driving 32 segments and 4 commons, alongside 5 channels of 8-bit Analog-to-Digital converters. It executes instructions in 500 nanoseconds at 8MHz and is offered in a 68-pin Ceramic Leaded Chip Carrier (CLCC) windowed package (24.13 × 24.13 mm) for UV-erasable development and prototyping. A microcontroller (MCU) is a single-chip computer containing a CPU, program memory (ROM/EPROM/Flash), data memory (RAM), and integrated peripherals such as timers, communication interfaces, and ADCs. The PIC16C924/CL belongs to the Mid-Range 8-bit PIC architecture hierarchy: 8-bit MCU -> PIC16 family -> PIC16C sub-family -> microcontroller -> embedded system IC. Its on-chip EPROM (7KB / 4K × 14) makes it suited for one-time-programmable commercial applications where in-system reprogrammability is not required. Key features include 176 bytes of general-purpose RAM, 25 general-purpose digital I/O pins, an integrated LCD driver, a 5-channel 8-bit ADC, and a synchronous serial port configurable as 3-wire SPI or 2-wire I2C. The 8MHz internal oscillator and 35 single-word instruction RISC core reduce code development time, while the windowed ceramic package supports UV erasure for iterative firmware development. Architecturally, the PIC16C924 uses a Harvard-style RISC pipeline with a 14-bit instruction word, enabling single-cycle execution of most instructions except branches. The integrated LCD driver with 32 segment and 4 common outputs supports up to 128-pixel LCD panels without external charge-pump circuitry, reducing BOM cost in human-machine interface designs. The 5-channel 8-bit ADC provides sensor interface capability for temperature, voltage, and process-variable monitoring. Typical applications include industrial control panels with LCD displays, electronic metering (electric/gas/water meters), medical instrumentation with LCD readouts, point-of-sale terminals, consumer appliances with segment displays, and HVAC thermostat controllers. The combination of LCD driver, ADC, and serial interface makes the PIC16C924 particularly suitable for battery-powered metering equipment. When designing with this device, note that the /CL suffix designates the Ceramic Leaded Chip Carrier with UV-transparent window - suitable for development but more expensive than plastic OTP packages. Ensure 5V (±10%) supply tolerance, place decoupling capacitors within 5mm of VDD pins, and use the MCLR pin reset circuit with the recommended 10kΩ pull-up for reliable operation. This page synthesizes distributor pricing from DigiKey, Mouser, and Hotenda, parametric comparison with drop-in alternatives in the same 68-CLCC footprint, and practical design notes covering EPROM programming, LCD bias generation, and ADC acquisition timing not explicitly listed on standard distributor product pages.

询价联系我们

PIC16C924T-04/PT

PIC16C924T-04/PT - 8-Bit 4MHz LCD MCU 7KB OTP | Microchip

The Microchip Technology PIC16C924T-04/PT is an 8-bit CMOS microcontroller from the PIC16C family featuring an integrated LCD driver, 7KB of One-Time-Programmable (OTP) program memory (4K x 14 words), 176 bytes of RAM, and 52 digital I/O pins. The device operates at 4 MHz from a 5V supply and is housed in a 64-pin TQFP (10x10 mm) surface-mount package. The "T" suffix in the part number indicates tape-and-reel packaging, while "/PT" denotes the TQFP package code. A PIC microcontroller (Programmable Intelligent Computer) is a Harvard-architecture RISC-based 8-bit MCU widely used in embedded control. The PIC16C family specifically targets applications requiring OTP programmability, ROM-less flexibility, or ceramic-windowed erasable variants for prototyping. The PIC16C924 belongs to the LCD-driver subset, integrating a built-in LCD controller that simplifies the design of battery-powered human-machine interface products. As an 8-bit MCU it sits within the broader hierarchy of microcontroller -> embedded controller -> semiconductor device. Key features include a built-in LCD driver supporting up to 32 segments x 4 commons (128 segments total), a 5-channel 8-bit analog-to-digital converter, two 8-bit timers plus one 16-bit timer, a synchronous serial port (SSP) supporting SPI and I2C, and an asynchronous serial port (USART/SCI). The PIC16C924 also includes a watchdog timer, brown-out reset, and power-saving SLEEP mode. Operating voltage ranges from 4.0V to 6.0V with industrial temperature grades available. Architecturally, the PIC16C924 uses a 14-bit instruction word with an 8-bit data path, providing 35 single-cycle instructions at 4 MHz (250 ns instruction cycle). The integrated LCD controller supports static, 1/2, 1/3, and 1/4 multiplex modes with selectable bias and frame frequency, eliminating the need for an external LCD driver IC. The device's CMOS process delivers low power consumption suitable for portable applications. Typical applications include battery-powered metering (gas, water, electric), portable medical instruments (blood glucose meters, thermometers), consumer appliances with LCD panels (microwave ovens, washing machines), industrial control panels with segment displays, and automotive dashboard segments where aftermarket gauges are needed. The integrated LCD driver reduces BOM cost and PCB footprint in these segment-LCD applications. When designing with this device, note that OTP memory is one-time programmable - code cannot be field-updated. For development, use the PIC16C924 with a JW (windowed) package or a Flash-based equivalent such as the PIC16F946. Ensure segment-LCD bias resistors are correctly calculated for the chosen LCD multiplex rate, and add a decoupling capacitor (0.1 uF) close to VDD. This page synthesizes distributor stock data, parametric drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet alone.

询价联系我们

PIC16C924T-04I/L

PIC16C924T-04I/L - 8-Bit 4MHz OTP MCU with LCD Driver, 68-PLCC | Microchip

The Microchip Technology PIC16C924T-04I/L is an 8-bit CMOS RISC microcontroller with integrated LCD driver, delivered in a 68-pin PLCC (J-Lead) package. It runs at 4 MHz, integrates 7 KB of OTP program memory (4K x 14), 176 bytes of RAM, and 52 digital I/O lines for direct sensor and peripheral interfacing. Tape-and-reel packaging variant designed for high-volume SMT assembly. What is an 8-bit OTP microcontroller? An 8-bit OTP (One-Time Programmable) MCU is a microcontroller whose program memory can be written only once after manufacture, making it cost-optimized for high-volume, fixed-code applications where firmware revision is unnecessary. OTP MCUs sit inside the broader 8-bit microcontroller hierarchy, alongside Flash- and ROM-based variants, and are widely used in consumer appliances, industrial controllers, metering, and display-driven human-machine interface (HMI) products. The LCD driver integration makes PIC16C924 particularly suited to systems where alphanumeric segment displays are required without external driver ICs. Key features include an 8-level hardware stack, 14-bit instruction word, Harvard architecture with separate program and data buses, on-chip LCD driver supporting up to 64 segments, 52 I/O pins, and an industrial operating temperature range of -40C to +85C. The 68-pin PLCC package supports through-hole or socket mounting, easing prototype rework and field replacement in legacy designs. The /L suffix indicates the PLCC package, while 'T' denotes tape and reel orientation, and '04I' identifies the 4 MHz industrial-temperature grade. Typical applications include industrial control panels, alphanumeric segment-LCD consumer appliances, point-of-sale terminals, instrumentation front panels, medical device displays, and automotive dashboard clusters. The integrated LCD driver eliminates the need for an external segment driver, reducing BOM cost and PCB area. When designing with this part, note that OTP memory cannot be reprogrammed in-circuit. For prototype development, consider the PIC16F926 equivalent or the PIC16C924 windowed JW variant, then transition to PIC16C924T-04I/L for production. Always verify maximum supply voltage (5.5 V) and oscillator configuration in the manufacturer datasheet. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Data sources include DigiKey, Microchip, Heisener, and MicrochipUSA.

询价联系我们

PIC16C924T-08/L

PIC16C924T-08/L - 8MHz 8-bit LCD MCU 7KB OTP 68-PLCC | Microchip

The Microchip PIC16C924T-08/L is an 8-bit CMOS RISC microcontroller with an integrated LCD driver, featuring 7KB (4K x 14) of One-Time Programmable (OTP) program memory and 176 bytes of SRAM, housed in a 68-pin PLCC package (24.23 x 24.23 mm). It executes at up to 8MHz with 500 ns single-cycle instruction time across only 35 single-word instructions, and integrates a 5-channel 8-bit analog-to-digital converter plus I2C and SPI connectivity. An LCD microcontroller is a specialized variant of an 8-bit MCU that adds on-chip segment drivers, charge-pump voltage generation, and bias network control to directly drive glass displays. Within the broader hierarchy it sits at: LCD MCU -> 8-bit microcontroller -> embedded microcontroller -> integrated circuit -> semiconductor. The integrated LCD subsystem eliminates the need for an external display controller, reducing BOM cost and PCB area in products that must show numeric or alphanumeric information without a graphical panel. Key features include 4K x 14 OTP program memory (7KB), 176 bytes of data RAM, 8 general-purpose registers, an integrated 5-channel 8-bit ADC, I2C and SPI serial interfaces, and a wide operating voltage range suited to battery-powered designs. The OTP memory is a one-time-programmable EPROM variant, distinguishing this family from the flash-based PIC16F9xx series. The 68-PLCC package provides easy through-hole assembly and socket compatibility for legacy industrial designs. The PIC16C924T-08/L uses Microchip's classic PIC16C RISC architecture, an enhanced Harvard design with separate program and data buses that allow instruction fetch and operand read in a single 500 ns cycle. The integrated LCD module supports common static, 1/2, 1/3, and 1/4 multiplex configurations and includes its own bias-generation resistor ladder, simplifying software-driven display updates while keeping the core CPU free for application logic. Typical applications include industrial control panels with character LCDs, appliance user interfaces, instrumentation front panels, point-of-sale terminals, and battery-powered metering devices. The combination of low-cost OTP memory and a built-in segment driver suits high-volume consumer and industrial products that have a fixed firmware image. When designing with this part, note that OTP memory cannot be reprogrammed in-circuit, so plan for prototype validation on a windowed (JW) package or a flash-based sibling such as PIC16F914 before committing to OTP volume units. Verify the maximum oscillator speed and ADC acquisition timing against your application to ensure adequate timing margin. This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC16C9xx family, and practical design notes that go beyond what is in the bare Microchip datasheet.

询价联系我们

PIC16C924T-08/PT

PIC16C924T-08/PT - 8MHz 8-Bit OTP MCU w/ LCD Driver | Microchip | 64-TQFP

The Microchip Technology PIC16C924T-08/PT is an 8-bit RISC microcontroller from the PIC16C family, integrating an on-chip LCD driver, 7KB (4K x 14) of One-Time-Programmable (OTP) program memory, and a 64-pin TQFP surface-mount package measured 10x10 mm. According to the Microchip datasheet, it executes instructions in a single 500 ns cycle (except program branches, which take two cycles) at an 8 MHz oscillator frequency, and it operates from a 5V supply. What is a PIC16C microcontroller? PIC16C is a legacy OTP (One-Time-Programmable) family of 8-bit CMOS microcontrollers built on Microchip's RISC (Reduced Instruction Set Computing) architecture. Within the wider taxonomy, PIC16C is a sub-family of the PICmicro MCU family, which itself belongs to microcontrollers (MCUs) under embedded processors and finally to integrated circuits (semiconductors). These OTP parts are typically used in volume commercial products where firmware is finalized at production time. Key features of the PIC16C924T-08/PT include 33 general-purpose I/O lines, an integrated LCD driver supporting segment drive, 8-bit timer/counter modules, a Watchdog Timer, low-power SLEEP mode, and an operating speed of DC to 8 MHz. The device has 192 bytes of on-chip data RAM and an enhanced instruction set including multiplication, which together ease the implementation of user interfaces with displays. From an architectural perspective, the PIC16C924 uses Harvard architecture with separate program and data buses, 14-bit-wide instructions, and only 35 single-word instructions to learn - significantly reducing code complexity. The integrated LCD driver and segment logic allow direct connection to a glass LCD without external driver ICs, reducing BOM and PCB area in display-equipped products. Typical applications include consumer appliances with LCD readouts, white-goods control panels, instrumentation front panels, industrial operator interfaces, and any embedded product that requires a low-pin-count human-machine interface. The integrated LCD peripheral is the defining feature that makes this device attractive versus general-purpose MCUs. When designing with this part, note that OTP memory cannot be re-programmed - firmware must be fully validated before commitment. Always verify the 64-TQFP PCB footprint against the mechanical drawing in the manufacturer datasheet and add proper decoupling (100 nF plus bulk) close to VDD/AVDD pins. This page combines distributor pricing, drop-in alternatives, and design notes that complement (not duplicate) the manufacturer datasheet.

询价联系我们

PIC16C924T-08I/L

PIC16C924T-08I/L - 8-Bit 8MHz OTP MCU w/ LCD Driver | Microchip

The Microchip Technology PIC16C924T-08I/L is an 8-bit CMOS OTP-based microcontroller with integrated LCD driver, delivering 8 MIPS performance from a 500 ns instruction execution cycle. Housed in a 68-pin PLCC package measuring 24.23 x 24.23 mm, it combines 7 KB (4K x 14) of on-chip EPROM program memory with a high-performance RISC CPU core. Operating from a 4V to 6V supply, it targets cost-sensitive embedded designs that need direct segment LCD support without an external driver IC. A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and peripherals on one die. The PIC16C family sits within the broader 8-bit microcontroller taxonomy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. OTP (One-Time Programmable) variants like this one are programmed once at production or in-circuit by the developer and cannot be erased, which lowers unit cost relative to flash-based parts for high-volume, fixed-code products such as consumer appliances and metering. Key features include 35 single-word instructions (all single-cycle except branches), 8 general-purpose SRAM registers, an integrated LCD driver for glass-direct segment displays, and a 25-pin programmable I/O count on the PLCC package. The wide operating range of -40C to +85C (industrial grade, indicated by the -I suffix) and 8 MHz oscillator support make the device suitable for mains-powered instruments that need both human-readable displays and reliable embedded control. The PIC16C924 uses a Harvard RISC architecture with separate program and data buses, enabling instruction fetch and execute in a single cycle for most opcodes. The LCD driver block generates segment and common waveforms internally, which removes the BOM cost and PCB area of an external HT1621-class driver and simplifies the BOM to a microcontroller plus bias resistors. The 'T' suffix indicates Tape & Reel packaging; the '/L' suffix indicates the 68-PLCC form factor. Typical applications include white-goods and appliance front-panel displays, industrial control panels with integrated glass, weighing scales, water/gas meter readouts, point-of-sale terminals, and HVAC thermostats. The integrated LCD driver is the decisive feature in these uses - engineers avoid the firmware complexity and additional cost of emulating segment waveforms in software on a generic MCU. When designing with the PIC16C924, ensure the OTP programming step is integrated into your production flow, since OTP cannot be re-written and any firmware bug becomes a hardware rework. Plan bias resistor values for the target LCD glass contrast curve during schematic design, and verify in-circuit programming timing against the 8 MHz instruction rate if you use the ICSP interface. This page synthesizes distributor pricing, drop-in alternatives from the PIC16C family and Microchip flash equivalents, and practical design notes that are not collated in the manufacturer datasheet alone.

询价联系我们

PIC16C924T-08I/PT

PIC16C924T-08I/PT - 8-Bit OTP MCU, 7KB, 8MHz, 64-TQFP | Microchip

The Microchip Technology PIC16C924T-08I/PT is an 8-bit CMOS OTP-based microcontroller from the PIC® 16C family, featuring 7KB (4K × 14) of one-time-programmable program memory, 8 MHz maximum operating frequency, and 25 programmable I/O pins housed in a 64-pin TQFP (10×10 mm) surface-mount package. The integrated LCD driver controller and 8-bit ADC make it suitable for applications requiring on-chip display and analog measurement, all in a single industrial-grade IC. A microcontroller (MCU) is a programmable integrated circuit that combines a CPU, memory (program + data), and peripherals on a single die. Within the semiconductor taxonomy, the PIC16C924 sits in the 8-bit MCU branch of the microcontroller family, which is a sub-category of microcontrollers under embedded processors. PIC microcontrollers use a RISC-based Harvard architecture that executes one instruction per cycle (except branches), delivering predictable timing suitable for real-time control. The 'C' suffix indicates one-time-programmable (OTP) EPROM program memory, distinguishing it from flash-based 'F' variants, and the OTP approach is commonly chosen for low-cost production runs of stable firmware. Key features include 192 bytes of RAM data memory, an integrated LCD driver controller with on-chip bias generation, an 8-channel 8-bit Analog-to-Digital Converter (ADC), three timers, a synchronous serial port (SSP) supporting SPI and I²C, and an industrial operating temperature range of −40°C to +85°C. The supply voltage range of 4.0V to 6.0V is matched to typical 5V system rails, and the OTP memory cell supports one-time field or factory programming. The PIC16C924T-08I/PT employs a RISC core with a 14-bit instruction word and a 35-instruction set, providing deterministic interrupt response and code density. Power management is handled through SLEEP mode with wake-up on I/O change or watchdog overflow. The integrated LCD driver supports up to 32 segments × 4 commons without external bias resistors, and the 8-bit ADC delivers conversion rates suitable for temperature, voltage, and sensor monitoring tasks. Typical applications include industrial control panels with LCD displays, medical monitoring devices requiring on-screen readouts, consumer appliance user interfaces, instrumentation with front-panel displays, point-of-sale (POS) terminals, and embedded operator-interface panels. The combination of integrated LCD, ADC, and 25 GPIO lines reduces BOM cost in display-centric embedded designs. When designing with this device, allocate sufficient PCB area for the 64-pin TQFP footprint and provide in-circuit emulation via the ICD header. The OTP memory cannot be erased, so firmware revisions require a new blank part; designers targeting development cycles should use the pin-compatible PIC16F914 or PIC16F946 flash variants. Note that the -08 speed grade denotes an 8 MHz oscillator; for higher throughput select the -04 (4 MHz) variant with corresponding in-circuit emulators. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design guidance not found in the bare manufacturer datasheet.

询价联系我们

PIC16C925-I/L

PIC16C925-I/L - 8-Bit 20MHz 7KB OTP MCU LCD Driver | Microchip

The Microchip Technology PIC16C925-I/L is an 8-bit CMOS OTP-based microcontroller with integrated LCD driver, 7KB (4K x 14) program memory, 176 bytes of RAM, and 52 I/O pins housed in a 68-pin PLCC (24.23x24.23 mm) package. It executes instructions in 200 nanoseconds at 20MHz and operates from a wide 2.5V to 5.5V supply voltage. The integrated LCD controller drives up to 32 segments across 4 common planes, enabling direct glass-attach human-machine interface designs without an external driver IC. An OTP-based 8-bit microcontroller is a one-time-programmable MCU that uses non-volatile EPROM/OTP memory for program storage instead of flash. OTP MCUs sit in the broader microcontroller taxonomy: microcontroller (MCU) -> 8-bit MCU -> CMOS MCU -> PIC16 family. Microchip's PIC16C family is known for its compact 35-instruction RISC-like instruction set, deterministic interrupt latency, and excellent code density, making it well-suited for cost-sensitive embedded control applications where program memory is finalized in production. The PIC16C925 integrates 5 channels of 10-bit Analog-to-Digital converters (ADC), enabling direct measurement of analog sensors without external signal conditioning. Peripherals include a 16-bit timer/counter with capture/compare/PWM (CCP), a USART module for asynchronous serial communication, an I2C/SPI synchronous serial port, and a watchdog timer for reliable operation in noisy environments. The 52 I/O pins are 5V-tolerant and configurable for digital input, output, or peripheral function multiplexing. The architecture is built on Harvard-style separated program and data buses, a 14-bit wide instruction word for compact code, and a 200ns instruction cycle (5 MIPS at 20MHz). The integrated LCD module supports static, 1/2, 1/3, and 1/4 duty cycles with user-selectable bias generation, eliminating the need for external charge-pump components in many designs. Brown-out Reset (BOR), Power-on Reset (POR), and a wide operating temperature range of -40C to +85C industrial grade ('I' suffix) provide robustness for harsh-environment deployments. Typical applications include industrial control panels with LCD readouts, medical instrumentation displays, consumer appliance user interfaces, metering equipment, and point-of-sale terminals. The combination of LCD driver, ADC, and ample I/O on a single die reduces BOM cost and PCB area for human-interface products. When designing with this device, ensure the OTP programming step is integrated into the production flow, as OTP memory cannot be reprogrammed. Decouple VDD with a 0.1uF ceramic capacitor placed within 5mm of the supply pin, and reserve pin assignments to allow in-circuit programming access if prototype iteration is required. This page synthesizes current distributor pricing, pin-compatible drop-in alternatives, and practical design notes not found in the standalone Microchip datasheet, helping engineers and buyers make informed component decisions.

询价联系我们

PIC16C925/CL

PIC16C925/CL - 8-Bit PIC MCU, 7KB EPROM, LCD Driver | Microchip

The Microchip PIC16C925/CL is an 8-bit RISC microcontroller from the PIC16C family, offering 4K x 14 (7KB) of one-time-programmable UV-erasable EPROM program memory, 176 bytes of data RAM, and a maximum clock frequency of 20 MHz, all housed in a 68-terminal CQCC (CL) J-lead windowed ceramic package that supports in-circuit reprogramming via UV erasure. The device integrates a 5-channel 10-bit Analog-to-Digital Converter (ADC) and a powerful LCD driver module capable of driving up to 32 segments and 4 commons, which directly removes the need for an external LCD controller in many human-machine-interface designs. Operating from a commercial temperature grade (0C to +70C) and a wide 2.5V to 5.5V supply range, the PIC16C925/CL is engineered for embedded applications that demand deterministic real-time control alongside integrated glass-display output. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and a set of on-chip peripherals into one package. In the system hierarchy, a microcontroller sits below a microprocessor (which requires external memory and peripherals) and above a basic logic controller. The PIC16C925 belongs to the PIC16C family of OTP/EPROM-based 8-bit Harvard-architecture microcontrollers; within Microchip's portfolio, PIC MCUs sit inside the broader 8-bit MCU category, which itself is a sub-class of microcontrollers alongside 16-bit PIC24/dsPIC and 32-bit PIC32 ARM Cortex-M devices. Key features that differentiate this device include its integrated LCD driver (32 segments x 4 commons = 128 pixel control), a 10-bit 5-channel ADC for sensor acquisition, and 13 interrupt sources with an 8-level hardware stack. The Harvard architecture separates program and data buses to allow simultaneous instruction fetch and operand access, yielding deterministic instruction timing of 200 ns at 20 MHz (one instruction cycle per clock). On-chip peripherals further include a USART for asynchronous/synchronous serial communication, an MSSP module supporting SPI and I2C (master/slave), two 8-bit timers plus one 16-bit timer, a Watchdog Timer with its own on-chip RC oscillator for reliable recovery, and a 4-bit wide parallel slave port for external bus expansion. The architecture is built around a 14-bit instruction word optimized for compact code density, supported by 35 single-word instructions. Brown-out Reset circuitry protects against corrupted flash operation during supply-voltage dips, while the In-Circuit Serial Programming (ICSP) interface - shared with one of the timer pins - allows firmware updates without removing the part from the board. The 68-pin CLCC J-lead windowed ceramic package exposes the silicon die to UV light through a quartz window, enabling field erasure of EPROM, an essential feature for development and low-volume production where firmware is iterated frequently. Typical applications for the PIC16C925/CL include metering and instrumentation (utility meters, industrial counters), consumer appliances requiring integrated LCD readout (microwave ovens, washing machines, thermostats), medical monitoring devices (blood pressure and glucose meters), automotive dashboard accessories, point-of-sale terminals, and remote sensor / data-acquisition nodes that need direct segment-LCD output without an external display controller. The wide operating voltage and integrated ADC also suit battery-powered portable instruments. When designing with the PIC16C925/CL, the most important trade-off is between the UV-erasable EPROM and modern Flash-based PIC successors - EPROM requires a windowed ceramic package and a UV erasure rig, which increases board cost. Engineers migrating firmware can preserve code by using the same PIC16 instruction set on newer PIC16F925 Flash parts while keeping the original board footprint, but only after verifying that the alternative's pinout matches the CLCC land pattern. This page consolidates distributor pricing, parametric data, drop-in alternatives, and practical design notes not found in a single manufacturer datasheet.

询价联系我们

PIC16C925T-I/PT

PIC16C925T-I/PT - 8-Bit OTP MCU w/ LCD Driver, 64-TQFP | Microchip

The Microchip Technology PIC16C925T-I/PT is an 8-bit OTP-programmable CMOS microcontroller from the PIC® 16C family, integrating a segment LCD driver and packaged in a 64-pin TQFP (10x10 mm) form factor. It executes instructions in 200 ns at a 20 MHz clock and contains 7 KB (4K x 14) of OTP program memory together with 176 x 8 bytes of general-purpose RAM. The on-chip LCD driver supports up to 32 segments x 4 commons, enabling direct glass drive for low-power human-machine interface products. A PIC microcontroller is a Harvard-architecture 8-bit RISC processor with separate program and data buses, recognized for deterministic interrupt latency, ultra-low power consumption, and a compact 35-instruction instruction set. Within Microchip's taxonomy, the PIC16C925 belongs to the mid-range PIC16 family (microcontroller -> 8-bit MCU -> embedded controller -> semiconductor IC), and the OTP variants (PIC16C-series) target volume production where firmware is finalized and code-protection is mandatory. This contrasts with the Flash-based PIC16F and PIC16LF series used in development and field-upgradable designs. Key features include an integrated 8-channel 8-bit A/D converter, a capture/compare/PWM module, a synchronous serial port (SSP) for SPI/I2C, a USART, two 8-bit timers and one 16-bit timer, a watchdog timer with its own on-chip RC oscillator, and a wide operating voltage range up to 5.5 V. Brown-out reset, power-on reset, and code protection are also integrated, reducing external component count and BOM cost for sealed-unit appliance designs. The PIC16C925T-I/PT uses Microchip's classic CMOS/EPROM technology and a fully static design, allowing clock frequencies down to DC for low-power sleep modes. The OTP program memory is one-time programmable, after which the bit pattern cannot be altered, making this part suited for high-volume production runs of mature products rather than for prototyping. Typical applications include white-goods control panels, thermostats, weighing scales, medical infusion pumps, industrial counters, gas-meter displays, and any battery- or line-powered appliance requiring an integrated segment-LCD glass drive alongside general-purpose digital I/O. When designing with this device, plan OTP programming tooling and code-protection fuse settings early in the design cycle, because code cannot be modified post-programming. The integrated LCD charge-pump can be bypassed to reduce quiescent current on line-powered systems but must be retained for battery operation below the LCD threshold voltage. This page synthesizes distributor pricing, verified cross-references, and practical design notes not found in the manufacturer datasheet alone, giving procurement and design engineers a single source for evaluation.

询价联系我们

PIC16C926-I/L

PIC16C926-I/L - 8-bit 20MHz MCU 14KB OTP LCD | Microchip

The Microchip Technology PIC16C926-I/L is an 8-bit CMOS OTP microcontroller in the PIC16CXXX mid-range family, integrating 14KB (8K x 14) of program memory, 336 bytes of RAM, an LCD driver module capable of driving 32 segments and 4 commons, and 5 channels of 10-bit Analog-to-Digital converters, all housed in a 68-pin PLCC package. Background: An 8-bit microcontroller (MCU) is a single-chip computer optimized for embedded control, integrating a CPU core, program memory, data RAM, and peripherals such as timers, ADCs, and communication interfaces. Within the PIC16CXXX mid-range family, the PIC16C926 occupies a specialized niche as a cost-optimized LCD-controller MCU, combining general-purpose digital I/O with an integrated segment-LCD driver, eliminating the need for an external LCD controller chip in human-machine interface designs. Key features: 20 MHz maximum clock with 200 ns instruction cycle, 14KB OTP program memory (one-time programmable, ideal for mature production), 336 bytes of RAM, 52 digital I/O pins, integrated 10-bit 5-channel ADC, integrated LCD driver supporting 32 segments x 4 commons, and synchronous serial port configurable as 3-wire SPI or 2-wire I2C. The 68-pin PLCC package provides ample pin count for the LCD segment lines and parallel I/O expansion. Technical depth: The PIC16C926 executes instructions in a single cycle (200 ns at 20 MHz) using Microchip's Harvard-architecture RISC core with 35 single-word instructions. The integrated LCD driver uses charge-pump-derived bias voltages and supports static, 1/2, 1/3, and 1/4 duty cycles, enabling glass-direct drive of character and graphic LCD modules without external voltage generation. Typical applications: industrial control panels with LCD readouts, medical instrument front panels, appliance user interfaces, metering equipment, and point-of-sale terminals. The integrated LCD driver and ADC channel count make it particularly suited to battery-powered instrumentation that displays measured values on a segmented glass. Design consideration: The OTP (one-time programmable) memory mandates that firmware be fully validated before programming; field updates are not possible. Engineers should evaluate PIC16F926 (Flash-based, pin-compatible) for prototyping or designs that may require firmware revision. This page synthesizes distributor pricing, cross-reference alternatives within the PIC16 mid-range family, and design guidance not found in the manufacturer datasheet alone.

询价联系我们

子分类

产品（38,000+)

PIC16C923T-04I/L - 8-bit OTP MCU, 7KB EPROM, LCD Driver | Microchip

PIC16C923T-04I/PT - 8-Bit OTP MCU with LCD Driver | Microchip

PIC16C923T-08/L - 8-Bit OTP MCU w/ LCD Driver, 7KB | Microchip

PIC16C923T-08/PT - 8-bit CMOS MCU with LCD Driver, 8MHz, TQFP-64 | Microchip

PIC16C923T-08I/L - 8-Bit OTP MCU 7KB 52 I/O 68-PLCC | Microchip

PIC16C923T-08I/PT - 8-Bit OTP MCU w/ LCD Driver, 8MHz, TQFP-64 | Microchip

PIC16C924-04/L - 8-bit OTP MCU 7KB EPROM 8MHz LCD | Microchip

PIC16C924-04/PT - 8-bit 4MHz 7KB OTP MCU w/ LCD Driver | Microchip

PIC16C924-04I/L - 8-bit CMOS MCU with LCD Driver, 4MHz | Microchip

PIC16C924-08/L - 8-Bit MCU w/ LCD Driver, 7KB OTP, 68-PLCC | Microchip

PIC16C924-08/PT - 8MHz 8-Bit MCU w/ LCD Driver | Microchip

PIC16C924-08I/L - 8-Bit OTP MCU w/ LCD Driver | 8MHz | 68-PLCC

PIC16C924-08I/PT - 8-Bit 8MHz OTP MCU w/ LCD Driver | Microchip

PIC16C924/CL - 8MHz 8-Bit MCU w/ LCD Driver | 68-CLCC | Microchip

PIC16C924T-04/PT - 8-Bit 4MHz LCD MCU 7KB OTP | Microchip

PIC16C924T-04I/L - 8-Bit 4MHz OTP MCU with LCD Driver, 68-PLCC | Microchip

PIC16C924T-08/L - 8MHz 8-bit LCD MCU 7KB OTP 68-PLCC | Microchip

PIC16C924T-08/PT - 8MHz 8-Bit OTP MCU w/ LCD Driver | Microchip | 64-TQFP

PIC16C924T-08I/L - 8-Bit 8MHz OTP MCU w/ LCD Driver | Microchip

PIC16C924T-08I/PT - 8-Bit OTP MCU, 7KB, 8MHz, 64-TQFP | Microchip

PIC16C925-I/L - 8-Bit 20MHz 7KB OTP MCU LCD Driver | Microchip

PIC16C925/CL - 8-Bit PIC MCU, 7KB EPROM, LCD Driver | Microchip

PIC16C925T-I/PT - 8-Bit OTP MCU w/ LCD Driver, 64-TQFP | Microchip

PIC16C926-I/L - 8-bit 20MHz MCU 14KB OTP LCD | Microchip