集成电路

子分类

📁 ADC/DAC 3,100+ 产品 📁 放大器IC 1,700+ 产品 📁 音频编解码器 18 产品 📁 音频IC 2 产品 📁 时钟与计时 640+ 产品 📁 Comparator ICs 1 产品 📁 DSP 1,100+ 产品 📁 数据采集IC 2 产品 📁 数字电位器 4 产品 📁 显示驱动与控制器 1 产品 📁 FPGA与CPLD 7,100+ 产品 📁 接口IC 3,000+ 产品 📁 LED驱动器 1 产品 📁 逻辑IC 450+ 产品 📁 存储IC 870+ 产品 📁 微控制器 20,000+ 产品 📁 微处理器 4 产品 📁 电机驱动器 1 产品 📁 其他 1 产品 📁 Sensor and Detector Interfaces 1 产品 📁 专用IC 15 产品 📁 视频IC 13 产品

产品（38,000+)

PIC16F1519T-I/MV - 28KB Flash, 8-bit XLP MCU | Microchip
PIC16F1519T-I/MV

PIC16F1519T-I/MV - 28KB Flash, 8-bit XLP MCU | Microchip

The Microchip Technology PIC16F1519T-I/MV is an 8-bit PIC microcontroller built on the nanoWatt eXtreme Low Power (XLP) technology platform, delivering 28KB of Flash program memory, 1024 bytes of SRAM, and 20 MHz CPU performance in a 40-pin UQFN (MV) 5x5 mm surface-mount package. The device operates from 1.8V to 5.5V (with Flash operation from 2.3V to 5.5V per the datasheet electrical characteristics), integrates a 10-bit ADC with multiple channels, two CCP modules, and the standard PIC16F peripheral set including EUSART, MI2C/SPI, PWM, and a watchdog timer with brown-out reset and POR. An 8-bit microcontroller (MCU) is a microprocessor integrating CPU core, non-volatile program memory (Flash), volatile data memory (SRAM), and on-chip peripherals onto a single silicon die. Within the broader taxonomy, the PIC16F1519 belongs to the PIC16F family (mid-range PIC), part of the 8-bit MCU category, which itself sits inside the microcontroller > embedded controller > semiconductor hierarchy. The "nanoWatt XLP" branding refers to Microchip's ultra-low-power process and design techniques targeting sleep currents below 1 uA, extending battery life in portable and energy-harvesting designs. The MV suffix denotes the 40-pin UQFN package; the T suffix denotes tape-and-reel packaging; the I suffix denotes the industrial -40C to +85C temperature range. Key differentiating features include 28KB Flash (16K x 14 words) with self-write capability, 1024 bytes RAM, an internal oscillator trimmed to ±1% typical accuracy, the 10-bit A/D converter with up to 28 analog channels (package-dependent), and enhanced mid-range core with 49 instructions, 16-level hardware stack, and automatic interrupt context saving. The device supports in-circuit serial programming (ICSP) and debug via MPLAB tools including the MPLAB Snap, PICkit 4, and ICD 4. Typical applications include battery-powered IoT sensor nodes, low-power wireless protocol bridging (LoRa, Sub-GHz, BLE companion controllers), industrial sensing with analog front-ends, consumer appliances, automotive body and HVAC subsystems, USB HID peripherals, and small-form-factor embedded controllers in HVAC, lighting, and home automation where code density and ultra-low sleep current matter more than raw CPU speed. Design considerations for the PIC16F1519 include layout of the 40-pin UQFN thermal/exposed pad to the ground plane for mechanical reliability, mandatory 100 nF + bulk decoupling near VDD, adherence to the in-circuit programming pin assignments (ICSPCLK/ICSPDAT), and correct configuration bit settings to enable the internal oscillator and disable unused peripherals for lowest sleep current. This page synthesizes distributor pricing, drop-in alternative MPNs from the same PIC16F family, and practical design notes not consolidated on any single manufacturer or distributor page. Specifications below are extracted from the PIC16F1519 datasheet family document and distributor listings as of 2026-09-19.

询价 联系我们
PIC16F15213-E/MF - 8-bit 32MHz MCU, 3.5KB Flash | Microchip
PIC16F15213-E/MF

PIC16F15213-E/MF - 8-bit 32MHz MCU, 3.5KB Flash | Microchip

The Microchip Technology PIC16F15213-E/MF is an 8-bit PIC microcontroller from the PIC16F152xx family, operating at up to 32MHz with 3.5KB (2K x 14) of Flash program memory, packaged in an 8-pin DFN (3x3 mm). According to the Microchip datasheet (DS40002195A), the device features a 10-bit Analog-to-Digital Converter (ADC), Peripheral Pin Select (PPS), two PWM channels, two CCP modules, hardware limit timer (HLT), and eXtreme Low-Power (XLP) Sleep mode for battery-friendly designs. An 8-bit microcontroller (MCU) is a small computer-on-a-chip that integrates a CPU, program memory (Flash), data memory (RAM), peripherals, and I/O on a single silicon die. The PIC16F152xx family sits within Microchip's broad 8-bit PIC microcontroller lineup, targeting cost-sensitive sensor and real-time control applications. Within the broader hierarchy, this part class spans PIC microcontroller -> 8-bit MCU -> microcontroller -> embedded controller -> semiconductor. The 8-bit data path means the ALU natively processes 8 bits per instruction cycle, balancing code density with deterministic interrupt response, which suits real-time sensing and motor-control loops. Key differentiating features include Core Independent Peripherals (CIPs) such as the 10-bit ADC with internal voltage reference, the hardware limit timer that offloads timing-critical tasks from the CPU, and the PPS module that routes digital peripherals to virtually any I/O pin. These CIPs reduce firmware complexity, shrink BOM cost, and lower active power. The device also offers standard communication modules including EUSART, SPI, and I2C, allowing it to act as a network slave or sensor hub in distributed architectures. Architecturally, the PIC16F15213 uses a Harvard RISC core with a hardware stack and a 14-bit instruction word optimized for compiled C code. The 32MHz internal oscillator eliminates the need for an external crystal in many designs, reducing both PCB area and BOM cost. Functional Safety (FuSa) features in the PIC16F152xx family make the part appropriate for applications that need self-diagnostics or fail-safe behavior. Typical applications for the PIC16F15213-E/MF include IoT sensor nodes, low-power wireless transmitters, battery-powered HVAC sensors, small appliance controls, LED lighting drivers, and consumer white goods. The combination of small footprint, low power, and standard communication peripherals positions it for designs where PCB real estate is at a premium. When designing with this MCU, allocate the ADC acquisition time carefully, place the decoupling capacitor within 3mm of the VDD pin, and confirm that PPS mapping is finalized before committing the firmware - changing PPS mappings later often requires firmware rework.

询价 联系我们
PIC16F15213-E/P - 8-Bit 32MHz MCU 3.5KB Flash DIP-8 | Microchip
PIC16F15213-E/P

PIC16F15213-E/P - 8-Bit 32MHz MCU 3.5KB Flash DIP-8 | Microchip

The Microchip Technology PIC16F15213-E/P is an 8-bit PIC microcontroller featuring a 32 MHz internal oscillator, 3.5 KB (2K x 14) of Flash program memory, 256 bytes of RAM, and zero data EEPROM, packaged in an 8-pin PDIP through-hole format. It integrates a 10-bit ADC, two PWM channels, two CCP modules, hardware limit timer (HLT), watchdog timer (WDT), peripheral pin select (PPS), and communication peripherals including EUSART, SPI, and I2C. This particular variant carries the extended (-E) temperature grade and is part of Microchip's Functional Safety (FuSa) capable product line. An 8-bit microcontroller (MCU) is a programmable integrated circuit that uses an 8-bit data path to execute instructions and interface with peripherals. Microcontrollers sit at the heart of embedded systems, hierarchically classified as: microcontroller -> embedded processor -> semiconductor -> integrated circuit. PIC microcontrollers use a modified Harvard RISC architecture, separating program and data buses for deterministic instruction throughput, and are widely deployed where low cost, low power, and ease of programming outweigh raw compute performance. The PIC16F15213-E/P delivers up to 32 MHz CPU performance from its internal oscillator, eliminating the need for an external crystal in many designs. Peripherals are interconnected through Peripheral Pin Select (PPS), allowing remapping of digital functions to different physical pins and simplifying PCB layout. The eXtreme Low-Power (XLP) Sleep Mode reduces quiescent current to single-digit microamps, enabling long battery life in sensor and IoT end nodes. Functional Safety support and Core Independent Peripherals (CIPs) allow safety-critical logic to be implemented without CPU intervention. Typical applications include cost-sensitive sensor interfaces, real-time control loops, low-power IoT edge nodes, and consumer appliance controls. The integrated 10-bit ADC, PWM, and EUSART/SPI/I2C interfaces cover most mixed-signal acquisition and actuation tasks. Compared to Cortex-M0 alternatives, the PIC16F15213 consumes less power in sleep mode and offers a smaller code footprint. When designing with this MCU, place a 0.1 uF decoupling capacitor as close as possible to VDD and consider using the ICSP programming header even for production boards to enable in-field firmware updates. Programming is performed via Microchip's MPLAB X IDE with XC8 compiler support.

询价 联系我们
PIC16F15213-E/SN - 8-bit MCU, 3.5KB Flash, 32MHz | Microchip
PIC16F15213-E/SN

PIC16F15213-E/SN - 8-bit MCU, 3.5KB Flash, 32MHz | Microchip

The Microchip Technology PIC16F15213-E/SN is an 8-bit PIC microcontroller from the PIC16F152xx family, featuring 3.5KB (2K x 14 words) of Flash program memory, 256 bytes of SRAM, and 32MHz internal oscillator speed, housed in an 8-pin SOIC (SN) package with the -40C to +125C extended temperature grade. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for program storage, SRAM for runtime data, and EEPROM for non-volatile data), and peripherals onto one die. The PIC16F152xx family belongs to the 8-bit microcontroller category within the broader semiconductor hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor device. These MCUs are designed for cost-sensitive sensor and real-time control applications where deterministic behavior, low power, and compact packaging matter more than raw computational throughput. Key features of the PIC16F15213-E/SN include Core Independent Peripherals (CIPs) such as Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), Numerically Controlled Oscillator (NCO), and 10-bit ADC with Computation (ADC2). Peripheral Pin Select (PPS) allows flexible signal routing, while the EUSART, SPI, and I2C communication peripherals enable standard serial connectivity. The device operates across 1.8V to 5.5V supply voltage with eXtreme Low-Power (XLP) sleep currents in the nanoamp range. The architecture uses an enhanced mid-range 8-bit core with a 14-bit instruction word and 16-level hardware stack, delivering deterministic interrupt response under 100ns. Internal oscillator calibration eliminates external crystals in most designs, reducing BOM cost and PCB area. The Functional Safety (FuSa) classification reflects documentation and design practices that simplify IEC 60730 Class B safety compliance for home appliance applications. Typical applications include low-cost sensor nodes, battery-powered IoT endpoints, LED lighting controllers, HVAC sensor interfaces, home appliance control boards, and general-purpose logic replacement. The 8-pin footprint and minimal external component count make it attractive for space-constrained designs. When designing with this MCU, allocate at least one CLC block for glue logic to reduce external gates. Ensure the ICSPDAT/ICSPCLK pins are accessible for in-circuit serial programming during board bring-up. Brown-out Reset (BOR) and Low-Voltage Programming (LVP) must be properly configured in configuration words to prevent code corruption during supply transients. This page synthesizes distributor pricing, drop-in pin-compatible alternatives from the same PIC16F152xx family, and practical design notes drawn from Microchip application notes - information not consolidated on any single manufacturer or distributor page.

询价 联系我们
PIC16F15213-I/SN - 8-bit 32MHz 3.5KB Flash MCU | Microchip
PIC16F15213-I/SN

PIC16F15213-I/SN - 8-bit 32MHz 3.5KB Flash MCU | Microchip

The Microchip PIC16F15213-I/SN is an 8-bit PIC16 microcontroller running up to 32 MHz with 3.5 KB (2K x 14) Flash program memory, 256 B SRAM, and a 10-bit ADC, packaged in an 8-pin SOIC (SN) for cost-sensitive sensor and real-time control applications. According to the Microchip product page and datasheet, this part belongs to the PIC16F152xx family that features Core Independent Peripherals (CIPs), eXtreme Low-Power (XLP) modes, and Peripheral Pin Select (PPS) for flexible signal routing. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and peripheral blocks such as ADC, timers, and communication interfaces into one IC. Within the broader semiconductor hierarchy, an MCU is a sub-category of microprocessors (which exclude memory and peripherals) and falls under digital logic ICs. The PIC16F15213 belongs to the 8-bit MCU class, sitting below 16-bit and 32-bit MCUs in performance but above discrete logic in integration density. This product type is commonly used as the main control element in appliances, sensors, IoT edge nodes, and battery-powered devices where low cost and low power are more critical than raw compute throughput. Key features include 32 MHz maximum CPU clock, 3.5 KB self-read/write Flash, 256 B SRAM, a 10-bit ADC with computation, EUSART (UART) and MSSP (SPI/I2C) communication peripherals, multiple Core Independent Peripherals (CIPs), and Intelligent Analog peripherals. The wide 1.8 V to 5.5 V operating voltage range supports both 3.3 V and 5 V rails. The I/SN suffix denotes the -40C to +85C industrial temperature grade in an 8-pin SOIC package with matte-tin lead finish. The PIC16F15213 uses Microchip's enhanced mid-range 8-bit core with 49 instructions, 16 stack levels, and a 2-cycle hardware multiplier. PPS remaps digital peripheral pins onto a wide choice of I/O pads, simplifying PCB layout when UART, SPI, or PWM must be routed around other signals. The XLP feature set includes sleep currents in the nanoampere range, making the part suitable for energy-harvesting and battery-backed designs. Typical applications include IoT sensor nodes, battery-powered remote controls, low-end consumer appliances, LED lighting controllers, and functional-safety (FuSa) capable subsystems where this specific die is qualified for use in safety-related hardware per IEC 61508 SIL-2 capable documentation. When designing with this device, confirm the 8-pin I/O budget matches your application: only 6 general-purpose I/O pins are available after power and ground, so SPI plus UART sharing is generally required rather than simultaneous full-duplex operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
PIC16F15213T-I/MF - 8-bit MCU, 3.5KB Flash, 32MHz | Microchip
PIC16F15213T-I/MF

PIC16F15213T-I/MF - 8-bit MCU, 3.5KB Flash, 32MHz | Microchip

The Microchip Technology PIC16F15213T-I/MF is an 8-bit PIC microcontroller from the PIC16F152xx family, providing 3.5 KB of Flash program memory and 32 MHz core performance in a compact 8-pin DFN (3x3 mm) package. Designed for cost-sensitive sensor and real-time control applications, the device integrates a 10-bit Analog-to-Digital Converter (ADC), Peripheral Pin Select (PPS), and standard communication peripherals including EUSART, SPI, and I2C. The part is qualified as part of Microchip's Functional Safety (FuSa) MCU family, making it suitable for safety-critical embedded designs. An 8-bit microcontroller is a type of embedded processor that fetches and executes instructions on an 8-bit data bus, balancing low cost and low power consumption with sufficient computational capability for control-oriented tasks. Within the semiconductor hierarchy, an 8-bit MCU sits below 16-bit and 32-bit microcontrollers but above discrete logic ICs, serving as the simplest programmable building block for sensor interfacing, motor drive sequencing, and user I/O handling. The PIC16F152xx family is Microchip's enhanced mid-range core family positioned for price-sensitive applications where a Cortex-M0 or MSP430 may be over-specified. Key features of the PIC16F15213T-I/MF include 256 bytes of SRAM, hardware Low-Power Sleep modes (XLP), 2 PWM channels, 2 CCP modules, an EUSART module, and PPS routing that allows digital peripheral pins to be remapped to multiple I/O pins. The wide 1.8V to 5.5V operating voltage range supports both single-cell battery-powered designs and 5V industrial systems, while the integrated 10-bit ADC delivers up to 9 analog input channels for sensor acquisition. Architecturally, the PIC16F15213T-I/MF employs an enhanced mid-range 8-bit RISC core with a single-cycle instruction execution at 32 MHz, yielding up to 8 MIPS of throughput. The CIP (Core Independent Peripheral) blocks allow timers, PWM, and communication to operate without CPU intervention, freeing the core for application logic. The 8-pin DFN package exposes six general-purpose I/O pins after power and ground allocation. Typical applications include IoT sensor nodes, battery-powered remote controls, LED lighting controllers, low-end BLDC fan drivers, and simple appliance user-interface boards. The PIC16F15213T-I/MF is also commonly used as a companion controller for housekeeping and housekeeping monitoring in larger systems. When designing with this device, choose decoupling capacitors as close to the VDD pin as possible (typically 100 nF) and consider using the PPS feature to route peripherals onto convenient pins. For new designs, the 8-pin DFN (3x3 mm) footprint is small but requires careful PCB layout to ensure reliable soldering and adequate thermal dissipation. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet, enabling engineers to evaluate the PIC16F15213T-I/MF for cost-sensitive embedded designs.

询价 联系我们
PIC16F15213T-I/SN - 8-bit MCU, 3.5KB Flash, 32MHz | Microchip
PIC16F15213T-I/SN

PIC16F15213T-I/SN - 8-bit MCU, 3.5KB Flash, 32MHz | Microchip

The Microchip Technology PIC16F15213T-I/SN is an 8-bit enhanced Mid-Range PIC16 microcontroller offering 32MHz operation, 3.5KB Flash program memory (2K x 14 words), and 256 bytes of RAM, housed in an 8-pin SOIC (SN) package with industrial -40C to +85C temperature rating. It integrates a 10-bit ADC, two PWM modules, two CCP modules, HLT, WDT, PPS, EUSART, MSSP (SPI/I2C), and Microchip's eXtreme Low Power (XLP) Sleep mode. The 'T' suffix indicates tape and reel packaging for high-volume assembly. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, volatile data memory, and digital and analog peripherals around a compact processor core. Within the broader taxonomy, the PIC16F15213 belongs to the enhanced Mid-Range 8-bit MCU category, which itself is a subset of microcontrollers, embedded processors, and finally the semiconductor product family. 8-bit MCUs are typically selected for cost-sensitive, deterministic, low-power embedded designs where a 32-bit core is overkill. Key features of the PIC16F15213T-I/SN include Peripheral Pin Select (PPS) for flexible signal routing, Core Independent Peripherals (CIPs) that offload tasks from the CPU, and functional safety (FuSa) features for applications requiring enhanced reliability. The device supports operating voltages from 1.8V to 5.5V across its industrial temperature range and provides up to 32MHz clock operation from internal or external sources. The PIC16F15213 architecture uses a Harvard-style 14-bit instruction set with 16 stack levels and self read/write Flash, enabling field firmware updates. Its XLP Sleep mode reduces active current consumption into the nanoamp range for battery-powered sensor endpoints, while integrated CIPs like timers and PWM operate autonomously without CPU intervention. Typical applications include IoT sensor nodes, battery-powered remote controls, low-cost motor control, LED lighting controllers, and consumer appliance subsystems. The wide 1.8V to 5.5V supply range also makes the device suitable for two- to four-cell battery chemistries and 5V industrial sensor interfaces. When designing with this part, select decoupling capacitance per datasheet recommendations and route PPS-mapped signals to avoid conflicting peripheral assignments. For low-power battery operation, leverage the XLP Sleep mode in combination with interrupt-driven wake-up sources to minimize average current draw. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers quickly evaluate the PIC16F15213T-I/SN against competing 8-bit MCU solutions.

询价 联系我们
PIC16F15214-E/SN - 7KB Flash 8-bit MCU 32MHz 8-SOIC | Microchip
PIC16F15214-E/SN

PIC16F15214-E/SN - 7KB Flash 8-bit MCU 32MHz 8-SOIC | Microchip

The Microchip Technology PIC16F15214-E/SN is an 8-bit PIC microcontroller with 7KB Flash program memory, 512 bytes SRAM, and a 32 MHz internal CPU, housed in an 8-pin SOIC (SN) package. The PIC16F152xx family combines Core Independent Peripherals (CIPs) such as Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), and Numerically Controlled Oscillator (NCO) with a 10-bit ADC, two PWM channels, two CCP modules, and standard communication peripherals including EUSART and MSSP (SPI/I2C). What is a PIC16 microcontroller? The PIC16 family is Microchip's enhanced mid-range 8-bit microcontroller architecture, sitting between the baseline PIC10/PIC12 and the high-performance PIC18/PIC24 families in Microchip's product hierarchy. PIC16 microcontrollers are widely used for cost-sensitive sensor, real-time control, and low-power embedded applications where the simplicity of an 8-bit core, mature toolchain, and low unit cost outweigh the throughput of a 32-bit MCU. The PIC16F15214 specifically belongs to the 'F1x5xxx' enhanced mid-range lineup optimized for ultra-low power (XLP) operation. Key features include eXtreme Low-Power (XLP) Sleep mode with nanoWatt technology, Peripheral Pin Select (PPS) for flexible I/O mapping, a Windowed Watchdog Timer (WWDT) and Hardware Limit Timer (HLT) for functional safety, and 49 instructions with a 16-level hardware stack. The part carries the 'Functional Safety (FuSa)' designation and is supported by MPLAB X IDE, XC8 compilers, and the MPLAB Code Configurator (MCC) for rapid firmware development. Technically, the device operates from 1.8V to 5.5V across the -40C to +125C industrial temperature range, with brown-out reset (BOR), power-on reset (POR), and on-chip voltage reference. The PIC16F15214 supports in-circuit serial programming (ICSP) via two pins, enabling field updates and factory provisioning. Peripherals are mapped via PPS to maximize pin reuse across the limited 8-pin package. Typical applications include IoT sensor nodes, low-power battery-powered remote controls, appliance control boards, LED lighting controllers, simple motor-driver interfaces, and compact industrial sensor nodes. The 8-SOIC footprint is ideal for hand-soldered prototypes and space-constrained consumer products. The Functional Safety variant is suitable for IEC 61508 SIL-1 capable systems when paired with documented firmware techniques. When designing with this part, allocate the two PPS-capable I/O pins carefully because PPS allows remapping most digital peripherals to nearly any I/O, which is essential on an 8-pin package. Always place a 100nF decoupling capacitor within 3 mm of VDD, and use the internal 32 MHz HFINTOSC unless timing precision demands an external crystal. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
PIC16F15214-I/P - 8-bit 32MHz 7KB Flash MCU, 8-PDIP | Microchip
PIC16F15214-I/P

PIC16F15214-I/P - 8-bit 32MHz 7KB Flash MCU, 8-PDIP | Microchip

The Microchip Technology PIC16F15214-I/P is an 8-bit PIC microcontroller from the PIC16F152xx family, featuring a 32 MHz CPU, 7 KB (4K x 14 words) of Flash program memory, and 512 bytes of RAM, housed in a through-hole 8-pin PDIP package. The part is qualified to the industrial temperature range (-40C to +85C) as indicated by the "I" suffix, and supports an operating voltage range of 1.8 V to 5.5 V across the family. A microcontroller (MCU) is a single-chip computer that integrates a CPU, program and data memory, and programmable I/O peripherals. The PIC16F15214 belongs to the 8-bit microcontroller -> microcontrollers -> integrated circuits -> semiconductors product hierarchy, and targets cost-sensitive sensor and real-time control applications with on-chip analog and digital peripherals. Key features of the PIC16F15214 family include Core Independent Peripherals (CIPs), a 10-bit ADC with internal voltage reference, two PWM modules, two CCP modules, hardware limit timer (HLT), windowed watchdog timer (WDT), Peripheral Pin Select (PPS), EUSART, SPI, and I2C communication interfaces. The device also supports eXtreme Low-Power (XLP) Sleep modes, making it well-suited for battery-powered sensor nodes. Architecturally, the PIC16F15214 uses a RISC-based 8-bit core with a hardware stack, single-cycle instruction execution (at 32 MHz), and an internal 32 MHz oscillator. The functional-safety (FuSa) variant designation in the family datasheet indicates design support for safety-critical applications, and the device is supported by MPLAB X IDE and the MPLAB XC8 compiler toolchain. Typical applications include IoT sensor nodes, low-power remote controls, home appliance user interfaces, small motor control (fans, BLDC drivers), LED lighting controllers, and battery-powered consumer devices. The 5 I/O pins and PPS allow flexible peripheral routing within the constraints of an 8-pin footprint. When designing with this device, pay attention to the 8-pin package constraint - only 5 I/O pins are available plus the reset pin, so peripheral mapping must be planned before PCB layout. Use the PPS feature to map EUSART, SPI, or I2C functions to the most convenient pins. This page synthesizes distributor pricing, drop-in package alternatives within the same 8-PDIP footprint, and practical design notes that go beyond the manufacturer datasheet to help engineers select and source the right variant quickly.

询价 联系我们
PIC16F15214-I/SN - 8-bit 32MHz 7KB Flash MCU | Microchip
PIC16F15214-I/SN

PIC16F15214-I/SN - 8-bit 32MHz 7KB Flash MCU | Microchip

The Microchip PIC16F15214-I/SN is an 8-bit PIC microcontroller running up to 32 MHz with 7 KB (4K x 14) of Flash program memory, packaged in an 8-pin SOIC (SN). It belongs to the PIC16F152xx family of low pin-count microcontrollers designed for cost-sensitive sensor and real-time control applications, and it carries Functional Safety (FuSa) support. The 'I' suffix denotes the industrial temperature grade (-40C to +85C), and 'SN' is the 8-pin SOIC package code. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile data memory (RAM), and peripherals onto one silicon die. Within the broader taxonomy, the PIC16F15214 sits as: microcontroller -> embedded controller -> CMOS logic IC -> semiconductor. Microchip's PIC16 line uses a Harvard RISC core with a 14-bit instruction word, optimized for deterministic interrupt response, low power consumption, and a small code footprint. The 'F' in PIC16F15214 indicates Flash program memory, which is in-circuit re-programmable, unlike older OTP or ROM variants. Key features of the PIC16F15214 include a 10-bit Analog-to-Digital Converter (ADC) with computation, Peripheral Pin Select (PPS) for flexible signal routing, Core Independent Peripherals (CIPs) such as Configurable Logic Cells (CLC) and Complementary Waveform Generator (CWG), an enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART), and two SPI/I2C modules. The device supports eXtreme Low-Power (XLP) operation with active current in the tens of microamperes and deep sleep currents in the nanoampere range. Architecturally, the PIC16F15214 uses Microchip's mid-range 8-bit core with a 14-bit instruction set, 8-level hardware stack, and 32 MHz internal oscillator accuracy typically calibrated within +/-1 percent. PPS allows digital peripherals (UART, SPI, PWM, CLC outputs) and analog channels (ADC, comparators) to be remapped to most I/O pads at runtime, which reduces PCB layout constraints and accelerates design reuse across pin-count variants. Typical applications include low-end IoT sensor nodes, battery-powered remote controls, white-goods user-interface boards, automotive body electronics (non-safety critical), small appliance controls, and LED lighting controllers. The combination of small footprint, low power, and Functional Safety documentation makes it suitable for cost-driven designs that may need to scale into safety-related environments. When designing with the PIC16F15214-I/SN, engineers should budget 2 GPIO pins minimum for ICSP programming (PGx and PGx), include a 0.1 uF decoupling capacitor close to VDD, and consult the MPLAB X IDE project configuration for code-size optimization. The PPS feature means firmware must lock I/O mapping before any time-critical peripheral use, especially at first power-up after a brown-out.

询价 联系我们
PIC16F15214T-I/MF - 8-Bit MCU, 7KB Flash, 32MHz, 8-DFN | Microchip
PIC16F15214T-I/MF

PIC16F15214T-I/MF - 8-Bit MCU, 7KB Flash, 32MHz, 8-DFN | Microchip

The Microchip Technology PIC16F15214T-I/MF is an 8-bit PIC microcontroller built around a 32MHz core, integrating 7KB (4K x 14 words) of Flash program memory, 512 bytes of SRAM, and a 10-bit ADC in a compact 8-pin DFN (3x3 mm) package. Designed for Functional Safety (FuSa) applications, the device combines an XLP (eXtreme Low-Power) Sleep mode with a rich peripheral set that includes two PWM modules, two CCP capture/compare/PWM peripherals, an EUSART, and SPI/I2C interfaces, plus Peripheral Pin Select (PPS) for flexible signal routing. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and I/O peripherals. PIC microcontrollers from Microchip use a Harvard-architecture RISC core, a simplified instruction set, and an ecosystem centered on MPLAB X IDE and XC8 compilers. Within the PIC taxonomy, the PIC16F family represents mid-range 8-bit devices with Flash program memory, positioned between baseline PIC10/12 and enhanced PIC18 devices, and aimed at cost-sensitive, low-power embedded designs. The PIC16F15214T-I/MF features Core Independent Peripherals (CIPs) that execute logic without CPU intervention, enabling deterministic timing and reduced firmware overhead. The 10-bit ADC provides analog input for sensor reading, while the dual PWM and CCP peripherals support motor, lighting, and power-control loops. The XLP Sleep mode drops current consumption to nanoamp levels, making the device well-suited for battery-powered applications such as IoT sensors, remote controls, and wearable health monitors. Typical applications include consumer appliances, smart-home IoT nodes, sensor interface boards, LED lighting controllers, and low-cost motor or fan control. The 8-DFN package's 3x3 mm footprint allows placement on space-constrained boards, while the wide 1.8V to 5.5V supply range supports both single-cell Li-ion and 3.3V system rails. The Functional Safety (FuSa) designation indicates documentation and design support for IEC 61508 SIL-class applications. Designers should plan PCB layout to expose the underside thermal pad of the DFN package to a copper pour for proper grounding and thermal dissipation. The PPS feature requires configuration via firmware before alternate peripheral functions become active on shared pins. Use MPLAB X IDE with XC8 compiler and MPLAB Code Configurator (MCC) for rapid peripheral setup. This page synthesizes distributor stock data, drop-in alternative MPNs, and practical design considerations not typically collected in the manufacturer datasheet, helping engineers evaluate the PIC16F15214T-I/MF for new designs or as a substitute in existing 8-pin PIC layouts.

询价 联系我们
PIC16F15214T-I/SN - 8-bit MCU, 7KB Flash, 32MHz, 8-SOIC | Microchip
PIC16F15214T-I/SN

PIC16F15214T-I/SN - 8-bit MCU, 7KB Flash, 32MHz, 8-SOIC | Microchip

The Microchip Technology PIC16F15214T-I/SN is an 8-bit PIC microcontroller with a 32 MHz CPU, 7 KB Flash program memory (4K x 14 words), and an 8-pin SOIC package, targeted at functional-safety-capable, low-power embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and peripheral interfaces onto one silicon die. The PIC family uses a Harvard-architecture RISC core with separate program and data buses, falling within the broader taxonomy: microcontroller -> embedded processor -> semiconductor IC. PIC16F152xx devices specifically target cost-sensitive applications that need more analog and communication capability than baseline PIC10/12/14 parts. Key differentiating features include a 10-bit ADC, two PWM modules, two CCP (Capture/Compare/PWM) peripherals, a Hardware Limit Timer (HLT), Windowed Watchdog Timer (WDT), Peripheral Pin Select (PPS), EUSART, and SPI/I2C interfaces. XLP (eXtreme Low-Power) Sleep Mode and an on-board 32 MHz oscillator deliver low active and sleep currents suited to battery and energy-harvesting applications. Architecture-wise, the PIC16F15214T-I/SN uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word, a single-cycle hardware multiplier, and Core Independent Peripherals (CIPs) that offload timing-critical tasks from the CPU. The PIC16F152xx family supports the Functional Safety (FuSa) capability classification per Microchip's IEC 61508 SIL-2/3 documentation set. Typical applications include consumer white goods, LED lighting controllers, small motor control (fans, BLDC), battery-powered IoT sensor nodes, and low-cost industrial control subsystems. The 8-SOIC footprint and PPS-driven pin mapping ease integration into space-constrained layouts. A practical design tip: the PPS feature reassigns digital peripheral functions to alternative pins, simplifying PCB layout. Engineers should consult the device family datasheet for the exact peripheral-to-pin mapping table and derate total I/O loading when multiple high-current sink/source pins operate simultaneously. This page synthesizes distributor pricing, drop-in alternatives from the same PIC16F152xx family, and practical engineering notes not consolidated in the manufacturer datasheet alone.

询价 联系我们
PIC16F15223-E/MG - 8-bit MCU, 32MHz, 3.5KB Flash, 16-QFN | Microchip
PIC16F15223-E/MG

PIC16F15223-E/MG - 8-bit MCU, 32MHz, 3.5KB Flash, 16-QFN | Microchip

The Microchip Technology PIC16F15223-E/MG is an 8-bit PIC16 microcontroller running at up to 32 MHz, integrating 3.5 KB (2K x 14 words) of Flash program memory and packaged in a 16-pin QFN (3x3 mm) with industrial -40C to +125C operating range. It belongs to the PIC16F152xx low-pin-count family that pairs Core Independent Peripherals (CIPs) with intelligent analog and standard communication modules for cost-sensitive sensor and real-time control applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and a set of peripheral interfaces (ADC, timers, communication ports, GPIO) on one silicon die. Within the broader embedded hierarchy, the PIC16F15223 belongs to the 8-bit microcontroller -> PIC family -> low-pin-count MCU category. The PIC architecture is built on a Harvard structure with separate program and data buses, which lets the CPU fetch instructions while reading data simultaneously and supports deterministic instruction-cycle timing for real-time control loops. Key features of the PIC16F15223 include a 32 MHz internal oscillator, 256 bytes of RAM, 256 bytes of EEPROM, a 10-bit Analog-to-Digital Converter (ADC), and multiple Core Independent Peripherals such as Configurable Logic Cells (CLC), Numerically Controlled Oscillator (NCO), and Complementary Waveform Generator (CWG). The device also integrates UART, SPI, and I2C communication modules. Its 16-pin QFN (MG package) footprint measures only 3x3 mm, making it ideal for space-constrained designs. The architecture emphasizes eXtreme Low-Power operation with multiple idle/sleep modes and fast wake-up, drawing only a few microamps in deep sleep. This combination of CIPs and low-power modes enables autonomous sensor-node designs that can poll, process, and transmit while running from a coin cell or energy-harvesting supply. The ADC supports capacitive touch and temperature measurement via dedicated hardware channels. Typical applications include low-cost IoT sensor nodes, battery-powered home automation, LED lighting control with effect generation, small motor control via PWM/CWG, and consumer appliance user interfaces. The wide operating voltage (typically 1.8V to 5.5V) and small QFN package also make it suitable for wearable fitness bands and disposable medical sensor patches. When designing with this part, verify that your chosen programming tool (PICkit 4, MPLAB SNAP, or ICD 4) supports the PIC16F152xx family and that the ICSP programming pins (VDD, VSS, PGD, PGC) are accessible. The 16-QFN package requires careful PCB pad layout to avoid solder bridging on the 0.5 mm pitch pads and thermal pad soldering for mechanical reliability. This page consolidates distributor pricing, drop-in alternative MPNs in the same QFN-16 footprint, and design notes beyond the manufacturer datasheet to accelerate component selection and supply chain decisions.

询价 联系我们
PIC16F15223-E/P - 8-bit MCU, 3.5KB Flash, 32MHz, 14-PDIP | Microchip
PIC16F15223-E/P

PIC16F15223-E/P - 8-bit MCU, 3.5KB Flash, 32MHz, 14-PDIP | Microchip

The Microchip Technology PIC16F15223-E/P is an 8-bit PIC microcontroller from the PIC16F152xx family featuring 3.5KB (2K x 14) of Flash program memory, 256 bytes of SRAM, and an internal 32MHz oscillator, housed in a 14-pin PDIP through-hole package. According to distributor listings, the device operates across a supply voltage range of 2.5V to 5.5V and supports low-power modes down to 1.8V at 16MHz. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data bus and a RISC or CISC core, integrating CPU, non-volatile program memory (Flash), working RAM, and a fixed set of peripherals into one package. Microcontrollers sit within the broader hierarchy of embedded processors and semiconductor ICs, alongside 16-bit and 32-bit MCUs, DSPs, and microprocessors. The 8-bit category remains dominant in cost-sensitive and low-power applications where deterministic interrupt response and a compact instruction set matter more than raw throughput. Key features of the PIC16F15223-E/P include a 10-bit ADC with up to 9 input channels, two PWM modules, two Capture/Compare/PWM (CCP) peripherals, hardware EUSART, SPI and I2C communication interfaces, peripheral pin select (PPS) for flexible signal routing, a hardware limiter timer (HLT), watchdog timer, and eXtreme Low-Power (XLP) Sleep mode. The Functional Safety (FuSa) variant classification indicates Microchip documentation supporting safety-critical designs. The PIC16F152xx architecture pairs Core Independent Peripherals (CIPs) with standard communication modules, allowing deterministic peripheral operation without CPU intervention. This architecture is well suited to mixed-signal front-end tasks that combine analog sampling, timer-driven control loops, and serial communication in firmware-light environments. Typical applications include industrial sensor nodes, low-cost consumer appliance controls, battery-powered IoT endpoints, LED lighting controllers, and small motor/valve drivers. The 14-pin PDIP form factor simplifies breadboarding and through-hole prototyping on legacy or hand-soldered designs. When designing with this part, note that the 14-pin PDIP package is pin-compatible with several siblings in the PIC16F152xx family, enabling footprint reuse across memory or peripheral variants. This page synthesizes distributor pricing, drop-in alternatives within the PIC16F152xx family, and practical design notes not aggregated in the manufacturer datasheet.

询价 联系我们
PIC16F15223-E/SL - 8-bit MCU, 3.5KB Flash, 32MHz | Microchip
PIC16F15223-E/SL

PIC16F15223-E/SL - 8-bit MCU, 3.5KB Flash, 32MHz | Microchip

The Microchip PIC16F15223-E/SL is an 8-bit PIC16 microcontroller featuring 3.5KB Flash program memory, 256 bytes RAM, and a 10-bit ADC, housed in a 14-pin SOIC package. It operates at up to 32MHz from a 1.8V to 5.5V supply and integrates Core Independent Peripherals (CIPs), dual PWM/CCP modules, and standard communication peripherals (EUSART, SPI, I2C) for embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash/ROM), working RAM, and on-chip peripherals such as ADCs, timers, and communication interfaces. The PIC16 family sits in Microchip's 8-bit mid-range portfolio (microcontroller -> 8-bit MCU -> PIC16 family -> PIC16F152xx sub-family), targeting cost-sensitive and low-power embedded applications. The 8-bit PIC architecture uses a modified Harvard design with separate program and data buses, delivering deterministic instruction execution. Core Independent Peripherals (CIPs) are hardware blocks that operate without CPU intervention, offloading tasks such as signal generation, sequencing, and analog monitoring. Key features of the PIC16F15223 include 3.5KB Flash (2K x 14 words), 256 bytes RAM, a 10-bit ADC with multiple channels, two PWM modules plus two CCP (Capture/Compare/PWM) modules, hardware EUSART, SPI, and I2C peripherals, Peripheral Pin Select (PPS) for flexible signal routing, and eXtreme Low-Power (XLP) Sleep mode drawing typically 0.6 uA. The 14-pin SOIC (SL) package provides a compact, hand-solderable footprint suitable for through-hole-style prototyping or low-density SMT assemblies. The PIC16F152xx family uses an Enhanced Mid-Range 8-bit RISC core with a hardware multiplier, 49 instructions, and a single-cycle instruction execution at 32MHz. PPS remapping allows most digital peripherals to be assigned to multiple I/O pins, simplifying PCB layout and BOM reuse across variants. Functional Safety (FuSa) documentation and Class B safety libraries are available from Microchip, supporting IEC 60730 compliance for home appliances and similar regulated products. Typical applications include consumer appliances, low-cost sensor nodes, LED lighting controllers, battery-powered IoT endpoints, white-good control boards, and small motor/H-bridge drivers using the integrated PWM/CCP. The wide operating voltage and low sleep current also suit coin-cell or energy-harvesting designs. When designing with this part, leverage PPS to optimize pin assignments early; the 14-pin SOIC has limited dedicated peripheral pins, so PPS remapping is essential when multiple peripherals must coexist. Always provide adequate decoupling (100 nF plus 1-10 uF bulk) near VDD, and follow Microchip's Emulated EEPROM guidance if non-volatile data storage beyond the dedicated EEPROM area is required. This page synthesizes distributor pricing, drop-in package-compatible alternatives in the PIC16F152xx family, and practical design notes not found in the manufacturer datasheet summary, giving engineers a faster path from part selection to prototype.

询价 联系我们
PIC16F15223-I/MG - 8-bit 32MHz 3.5KB Flash MCU | Microchip
PIC16F15223-I/MG

PIC16F15223-I/MG - 8-bit 32MHz 3.5KB Flash MCU | Microchip

The Microchip Technology PIC16F15223-I/MG is a Functional Safety (FuSa) ready 8-bit PIC microcontroller featuring 3.5KB (2K x 14) Flash program memory, 256 bytes of SRAM, and a 32 MHz internal oscillator, housed in a compact 16-pin QFN (3x3 mm) package. The part runs from 1.8V to 5.5V, includes a 10-bit ADC, two PWM modules, two CCP modules, an EUSART, SPI/I2C peripherals, Peripheral Pin Select (PPS), and eXtreme Low-Power (XLP) sleep modes for battery-friendly operation. What is an 8-bit microcontroller? An 8-bit MCU is a single-chip computer whose internal ALU, registers, and data bus are 8 bits wide. Within the broader taxonomy, the PIC16F15223 belongs to the PIC16 family (mid-range 8-bit), which itself is part of the Microchip 8-bit PIC microcontroller line under the embedded microcontroller / embedded processing category. Its role in a system is to manage low-level digital I/O, run state machines, handle communication protocols, and interface with analog sensors at very low power. Key differentiating features include Core Independent Peripherals (CIPs) that offload tasks from the CPU, Intelligent Analog capability (10-bit ADC with internal voltage reference), and Functional Safety documentation suitable for safety-critical designs. The 32 MHz speed delivers 8 MIPS of throughput, sufficient for sensor processing, simple protocol stacks, and PID loops. Architecturally the device uses a Harvard RISC core with a 14-bit instruction word, an internal 32 MHz HFINTOSC, and a deep-sleep current in the XLP nanoWatt range. PPS allows remapping of digital peripherals onto most I/O pins, dramatically simplifying PCB routing in space-constrained designs such as 16-QFN layouts where every pin matters. Typical uses include wearable fitness bands, smart sensor tags, low-power IoT end nodes, HVAC sensor transmitters, battery-powered remote controls, and consumer appliances. The wide 1.8-5.5V range allows direct operation from a single lithium cell or 2xAA/AAA batteries. Design tip: route the exposed pad (EP) of the 16-QFN to a continuous ground copper pour with multiple thermal vias. Without adequate EP soldering the junction-to-ambient thermal resistance rises sharply and the part will derate or fail at higher ambient temperatures. This page synthesizes Microchip datasheet specifications, distributor pricing tiers, drop-in same-package alternatives, and practical PCB layout guidance beyond what the manufacturer datasheet alone provides.

询价 联系我们
PIC16F15223-I/SL - 8-Bit MCU, 3.5KB Flash, 12 I/O | Microchip
PIC16F15223-I/SL

PIC16F15223-I/SL - 8-Bit MCU, 3.5KB Flash, 12 I/O | Microchip

The Microchip Technology PIC16F15223-I/SL is an 8-bit RISC microcontroller built on a CMOS process, delivering 32 MHz CPU performance with 3.5 KB (2K x 14) of Flash program memory and 256 bytes of SRAM, housed in a 14-pin SOIC (SL) package. It provides 12 I/O lines, a 10-bit ADC, two PWM channels, two CCP modules, and serial peripherals including EUSART, SPI, and I2C, operating from a 1.8 V to 5.5 V supply. The device is qualified for an industrial temperature range of -40 °C to +85 °C and is part of the Functional Safety (FuSa) capable PIC16F152xx family. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, typically based on Harvard or modified-Harvard architecture. The PIC16F15223 belongs to the broader hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Compared to 16-bit or 32-bit MCUs, 8-bit parts like the PIC16F15223 offer the lowest unit cost, the smallest code footprint, and the lowest active and sleep current, which is why they dominate cost-sensitive and battery-powered designs. Key differentiating features include Core Independent Peripherals (CIPs) such as the Configurable Logic Cell (CLC), Numerically Controlled Oscillator (NCO), and Complementary Waveform Generator (CWG) that offload timing-critical tasks from the CPU. The Intelligent Analog block combines the 10-bit ADC with a 5-bit DAC and a fixed-voltage reference. eXtreme Low-Power (XLP) Sleep Mode draws a typical current of roughly 30 nA with the WDT enabled, suiting battery-backed sensor nodes. Architecturally, the device uses a 14-bit instruction word with a two-stage pipeline and a hardware stack, executing most instructions in one clock cycle. The 32 MHz internal oscillator provides ±1 % accuracy across voltage and temperature, removing the need for an external crystal in most designs. Peripheral Pin Select (PPS) allows remapping of digital peripherals to any I/O, simplifying PCB routing on a 14-pin footprint. Typical applications include IoT sensor nodes, low-cost motor control (fans, small pumps, BLDC commutation assist), LED lighting controllers, automotive body electronics, home appliances, and consumer handheld devices. Industrial use cases include HVAC damper/valve control, remote I/O modules, and small appliances with capacitive touch via the mTouch peripheral. When designing with this part, note that the 14-pin SOIC limits I/O count; if more I/O is required, the larger PIC16F15224/15225 pin-compatible siblings in the same family offer 18 and 28 pins. The internal 32 MHz oscillator eliminates an external crystal but adds ±1 % frequency error compared with an external reference.

询价 联系我们
PIC16F15223T-E/MG - 8-Bit MCU, 3.5KB Flash, 32MHz | Microchip
PIC16F15223T-E/MG

PIC16F15223T-E/MG - 8-Bit MCU, 3.5KB Flash, 32MHz | Microchip

The Microchip Technology PIC16F15223T-E/MG is an 8-bit PIC16 RISC microcontroller operating up to 32 MHz, integrating 3.5 KB (2K x 14) Flash program memory, 256 bytes of RAM, and 11 general-purpose I/O pins in a 16-pin QFN (3x3 mm) package with exposed pad. The device combines a 10-bit ADC with up to 9 input channels, two PWM modules, two CCP capture/compare/PWM peripherals, hardware limit timer (HLT), watchdog timer, PPS (Peripheral Pin Select), EUSART, SPI, and I2C in a single low-pin-count package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), working RAM, and a rich set of digital and analog peripherals. The PIC16 family is one of Microchip's foundational 8-bit architectures, balancing code density, deterministic interrupt latency, and ultra-low power XLP sleep operation. Within that hierarchy, the PIC16F152xx sub-family targets cost-sensitive sensor and real-time control designs where small package and CIPs (Core Independent Peripherals) reduce firmware burden and BOM cost. Key features of the PIC16F15223T-E/MG include 3.5 KB self-programmable Flash, 256 bytes of SRAM, hardware interrupt-driven peripherals that run without core intervention, peripheral pin select for flexible signal routing, and eXtreme Low-Power (XLP) sleep modes that draw nanoamp-level currents to extend battery life. The wide operating voltage (1.8 V to 5.5 V typical for the family) and industrial -40C to +125C temperature range support harsh-environment deployment. Architecturally, the device uses an enhanced mid-range PIC16 CPU core with a 14-bit instruction word, a hardware multiplier, and a single-cycle instruction pipeline that delivers up to 16 MIPS at 32 MHz. The combination of PPS, CLC-style routing through configuration, and DMA-free interrupt-driven peripherals allows engineers to implement state machines and sensor conditioning largely without CPU overhead. Typical applications include low-cost IoT sensor nodes, battery-powered remote controls, white-goods user interfaces, LED lighting controllers, and small motor or fan control boards where the 16-QFN footprint is critical. The part is also well suited to functional-safety (FuSa) companion implementations thanks to its 11 I/O budget and CIP mix. The 'T' suffix indicates tape-and-reel packaging, and the -E temperature grade marks the extended -40C to +125C range. Design consideration: when laying out the 16-QFN (MG) package, expose the central thermal/exposed pad to a contiguous ground copper pour stitched with thermal vias to keep junction temperature within safe limits and to provide a low-impedance ground reference for the ADC. Decoupling should place a 100 nF X7R cap within 2 mm of VDD with a bulk 10 uF on the same node. This page synthesizes distributor pricing, drop-in alternatives from the same PIC16F152xx family, and practical design notes that are not aggregated on the manufacturer datasheet landing page.

询价 联系我们
PIC16F15223T-I/ST - 8-bit MCU, 3.5KB Flash, 14-TSSOP | Microchip
PIC16F15223T-I/ST

PIC16F15223T-I/ST - 8-bit MCU, 3.5KB Flash, 14-TSSOP | Microchip

The Microchip Technology PIC16F15223T-I/ST is an 8-bit enhanced mid-range microcontroller featuring 3.5 KB of Flash program memory, 256 bytes of RAM, and a 32 MHz internal oscillator, housed in a 14-pin TSSOP package. It integrates a 10-bit Analog-to-Digital Converter (ADC), two PWM modules, two Capture/Compare/PWM (CCP) peripherals, and Core Independent Peripherals (CIPs) including Peripheral Pin Select (PPS). Communication is supported through EUSART (UART) and MSSP (SPI/I2C) interfaces. An 8-bit microcontroller is a small computing-on-a-chip based on a CPU with an 8-bit data bus width, optimized for embedded control tasks. Within the broader taxonomy, this part belongs to the 8-bit MCU category, which descends from microcontroller, embedded controller, integrated circuit, and finally semiconductor. PIC16F152xx family parts sit below the PIC16 family umbrella and combine deterministic real-time control with low-power eXtreme Low-Power (XLP) Sleep modes well below 1 uA, suiting battery-backed and energy-harvesting designs. Key features include 49 base instructions, 16 stack levels, self-read/write Flash, a hardware Limit Timer (HLT), a Watchdog Timer (WDT), and Functional Safety (FuSa) documentation that simplifies IEC 61508 SIL-2 designs. The TSSOP-14 footprint delivers 12 available I/O pins after power and ground assignment, with PPS routing remapping digital peripherals to a wide set of pins. Operating voltage spans 1.8 V to 5.5 V across -40 C to +85 C industrial temperature. Architecturally, the device uses the enhanced mid-range PIC core with a 14-bit instruction word, providing deterministic interrupt latency and a single-cycle instruction execution at the system clock. The CIP blocks such as the Hardware Limit Timer and Configurable Logic Cell (CLC) let designers offload sequencing from the CPU, freeing bandwidth for application code while keeping the BOM small. Typical applications include sensor signal conditioning, low-cost motor and solenoid drivers, white-goods and appliance user-interface controllers, and IoT edge-node data acquisition. The wide voltage range also accommodates 3.3 V and 5 V mixed-signal boards common in industrial automation. A consideration when designing with this device is the 3.5 KB Flash ceiling; code-heavy applications should evaluate PIC16F15244/15245 family members in the same TSSOP-14 footprint. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes not consolidated in the manufacturer datasheet alone.

询价 联系我们
PIC16F15224-E/MG - 7KB Flash, 32MHz 8-bit MCU | Microchip
PIC16F15224-E/MG

PIC16F15224-E/MG - 7KB Flash, 32MHz 8-bit MCU | Microchip

The Microchip Technology PIC16F15224-E/MG is an 8-bit PIC microcontroller from the PIC16F152xx family, delivering 32 MHz maximum CPU speed with 7 KB of self-read/write Flash program memory in a 16-pin QFN (3x3 mm) package. According to Microchip product literature, it integrates the Enhanced Mid-Range core with 49 instructions, 16 stack levels, 512 bytes of SRAM, and peripheral pin select (PPS) for flexible signal routing. A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and programmable I/O peripherals on one integrated circuit. The PIC16F152xx family sits within the 8-bit microcontroller hierarchy: PIC16F -> 8-bit PIC -> PIC microcontroller -> microcontroller -> embedded IC -> semiconductor. MCUs power billions of devices across consumer, industrial, and automotive markets because they combine deterministic real-time control, low power, and small footprint at low cost. Key features of the PIC16F15224-E/MG include a 10-bit ADC, two PWM channels, two Capture/Compare/PWM (CCP) modules, an EUSART, an MSSP (SPI/I2C), hardware limit timer (HLT), watchdog timer (WDT), and eXtreme Low-Power (XLP) SLEEP mode. The Functional Safety (FuSa) variant designation indicates readiness for safety-critical applications including IEC 61508 SIL-capable designs. Operating voltage range is 1.8 V to 5.5 V across -40 °C to +125 °C. The Enhanced Mid-Range architecture uses a 14-bit instruction word with hardware multiplier and 16-level deep hardware stack. Peripheral Pin Select (PPS) remaps most digital peripheral signals onto a wide range of I/O pins, simplifying PCB layout when peripherals must be repositioned. The XLP technology typically achieves nanoampere SLEEP currents with brown-out reset (BOR) and power-on reset (POR) supporting battery-powered designs. Typical applications include low-power IoT sensor nodes, home appliances, HVAC controls, LED lighting controllers, battery chargers, automotive body and lighting modules, and small motor control loops. The 16-QFN (3x3) package suits space-constrained wearables and compact industrial sensor modules. When designing with this part, ensure programming/debug access is provisioned via PGD/PGC pins (not present in the 16-QFN variant's minimal pinout, so consider ICSP header pads). Select the proper VDD range (1.8 V - 3.6 V or 2.3 V - 5.5 V) before configuring the ADC for full 10-bit accuracy. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and design notes not consolidated on any single manufacturer or distributor page, providing a faster reference for engineers and buyers evaluating PIC16F15224-E/MG.

询价 联系我们
PIC16F15224-E/SL - 8-Bit 32MHz 7KB Flash MCU | Microchip
PIC16F15224-E/SL

PIC16F15224-E/SL - 8-Bit 32MHz 7KB Flash MCU | Microchip

The Microchip Technology PIC16F15224-E/SL is an 8-bit PIC microcontroller running up to 32MHz, with 7KB (4K x 14 words) of Flash program memory and 512 bytes of SRAM, housed in a 14-pin SOIC (SL) package. It belongs to the PIC16F152xx family, an enhanced mid-range core with 49 instructions, 16-level hardware stack, and self-read/write Flash capability. The 'E' suffix denotes the -40C to +125C extended industrial temperature grade, suitable for harsh-environment embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and programmable peripherals onto one silicon die. PIC microcontrollers use a Harvard RISC architecture with separate program and data buses, giving deterministic instruction timing and low interrupt latency. The PIC16F15224 sits in the 'enhanced mid-range' tier, between baseline PIC10/12/16 and the higher-end PIC18 families, balancing code density, peripheral set, and ultra-low-power (XLP) operation for battery-friendly applications. Key features include Peripheral Pin Select (PPS) for flexible I/O routing, an integrated 10-bit ADC with computation, two PWM modules and two CCP (Capture/Compare/PWM) channels, hardware UART (EUSART), and Master SSP for SPI/I2C. Core Independent Peripherals (CIPs) such as the CRC/SCAN, CWG (Complementary Waveform Generator), and NCO (Numerically Controlled Oscillator) let designers offload timing-critical tasks from the CPU. eXtreme Low-Power (XLP) technology with the IDLE/DOZE modes and Sleep current under 1 uA enables years-long battery life on coin cells. Typical applications include IoT sensor nodes, home appliances, LED lighting controls, low-cost motor control, and consumer HMI. The wide operating voltage range (1.8V to 5.5V) and extended temperature grade also suit industrial monitoring and HVAC controls. Designers migrating from older PIC16F1xxx parts gain PPS flexibility, more PWM channels, and the ADC-with-computation accelerator for averaging in firmware-free hardware. When designing with this part, place a 0.1uF decoupling capacitor as close to VDD as possible and use PPS to remap peripherals away from noisy digital pins. Program the WDT for fail-safe recovery in industrial environments, and verify the BOR threshold against your power-rail tolerances before locking firmware.

询价 联系我们
PIC16F15224-I/MG - 8-Bit MCU, 32MHz, 7KB Flash, 16-QFN | Microchip
PIC16F15224-I/MG

PIC16F15224-I/MG - 8-Bit MCU, 32MHz, 7KB Flash, 16-QFN | Microchip

The Microchip Technology PIC16F15224-I/MG is an 8-bit PIC microcontroller from the PIC16F152xx family operating at up to 32MHz, integrating 7KB (4K x 14 words) of Flash program memory and housed in a 16-pin QFN (3x3 mm) package with industrial -40C to +85C temperature rating. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (RAM), and integrated peripherals such as timers, ADCs, and communication interfaces. Within the broader taxonomy, the PIC16F15224 belongs to the 8-bit MCU category, then to the Enhanced Mid-Range Core family, then to Microchip's PIC16 product line, and finally to the power management and embedded control semiconductor hierarchy. The "I" suffix denotes industrial temperature range and the "MG" suffix denotes the 16-pin QFN package. Key features include 7KB Flash program memory with self read/write capability, 512 bytes of SRAM, a 10-bit ADC, two PWM modules, two CCP (Capture/Compare/PWM) modules, hardware limit timer (HLT), windowed watchdog timer (WDT), peripheral pin select (PPS), EUSART, and MSSP supporting both SPI and I2C communication. The device leverages eXtreme Low Power (XLP) technology with a SLEEP mode that makes it suitable for battery-powered applications. According to the manufacturer datasheet, the Enhanced Mid-Range core executes 49 instructions across 16 stack levels. Architecturally, the PIC16F15224 uses Microchip's Enhanced Mid-Range 8-bit RISC core which delivers deterministic interrupt response and single-cycle instruction execution (excluding branches). The integrated 10-bit ADC and Core Independent Peripherals (CIPs) allow hardware-based signal conditioning and timing without CPU intervention, reducing firmware complexity and power consumption. Peripheral Pin Select (PPS) provides flexible pin function remapping that simplifies PCB routing. Typical applications include IoT sensor nodes, consumer electronics, low-power battery-operated devices, industrial control, LED lighting control, and small home appliances. The compact 3x3 mm QFN-16 footprint enables integration in space-constrained designs while the wide operating voltage range supports both 3.3V and 5V systems. When designing with this device, ensure that programming pins (ICSPDAT/ICSPCLK) are accessible for in-circuit serial programming and debugging. The PPS feature requires configuration of register bits to remap peripheral functions; consult the device datasheet for valid input/output mapping combinations. This page synthesizes distributor pricing, parametric drop-in alternatives, and practical design notes that complement the manufacturer datasheet and enable faster component selection for embedded engineers.

询价 联系我们
PIC16F15224-I/P - 8-bit MCU 7KB Flash 32MHz 14-PDIP | Microchip
PIC16F15224-I/P

PIC16F15224-I/P - 8-bit MCU 7KB Flash 32MHz 14-PDIP | Microchip

The Microchip Technology PIC16F15224-I/P is an 8-bit PIC microcontroller built on the Enhanced Mid-Range core with 49 instructions and 16 stack levels, delivering up to 32 MHz CPU performance from a 7 KB (4K x 14) self-read/write Flash program memory, 512 bytes SRAM, and 128 bytes data EEPROM, housed in a 14-pin PDIP through-hole package. Functional-safety (FuSa) variants are supported in the family for safety-critical designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, volatile data RAM, and a peripheral set (timers, ADC, communication, GPIO) into one package. The PIC16F152xx family is positioned as an Enhanced Mid-Range device within Microchip's PIC16 portfolio (PIC16 -> 8-bit MCU -> MCU -> semiconductor), pairing the standard PIC16 instruction set with Core Independent Peripherals (CIPs) and Intelligent Analog peripherals. Compared with the older baseline PIC16, the Enhanced Mid-Range core adds more instructions, deeper stack, and improved interrupt handling while maintaining code compatibility with classic PIC16F mid-range code where appropriate. Key features include 12 I/O pins, a 10-bit ADC, two PWM modules, two CCP modules, hardware limit timer (HLT), watchdog timer (WDT), Peripheral Pin Select (PPS) for flexible signal routing, EUSART, MSSP (SPI/I2C), and eXtreme Low-Power (XLP) Sleep mode. The device operates from 1.8 V to 5.5 V with self-read/write Flash that supports in-application firmware updates. CIPs such as the configurable logic cell and signal measurement timer reduce CPU overhead, allowing the MCU to handle sensor interfacing, motor timing, and communication deterministically without software intervention. Typical applications include cost-sensitive sensor nodes, home appliances, lighting control, battery-powered IoT endpoints, and low-end motor control. The wide 1.8 V to 5.5 V supply range and XLP Sleep current make it suitable for energy-harvesting and battery-backed designs. PPS allows designers to remap peripherals to any I/O pin, simplifying PCB routing and enabling PCB layout reuse across family variants in 8-pin SOIC, 14-pin PDIP/SOIC, and 20-pin packages. A key design tip is to keep VDD decoupling within 5 mm of the supply pins and tie all unused pins to defined logic levels (VSS or VDD) to minimize I/O leakage. PPS remapping should be locked early in firmware to avoid unintended peripheral shifts at runtime. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
PIC16F15224-I/ST - 8-bit MCU 7KB Flash 32MHz TSSOP-14 | Microchip
PIC16F15224-I/ST

PIC16F15224-I/ST - 8-bit MCU 7KB Flash 32MHz TSSOP-14 | Microchip

The Microchip PIC16F15224-I/ST is an 8-bit RISC microcontroller featuring a 32 MHz PIC16F152 CPU core and 7 KB Flash program memory, housed in a 14-pin TSSOP (ST) package. The device operates from 2.5V to 5.5V with 12 I/O lines, integrated 10-bit ADC, dual PWM channels, dual CCP modules, and standard communication peripherals including EUSART, SPI, and I2C. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path that combines a CPU, RAM, Flash program memory, and peripherals on one die. Within the embedded system hierarchy, an MCU sits above discrete logic but below more capable 32-bit microprocessors; it is the workhorse of cost-sensitive sensor and real-time control applications where deterministic behavior, low power, and small package size matter more than raw compute. The PIC16F15224 belongs to Microchip's PIC16F152xx family, an enhanced mid-range core featuring 49 instructions, 16 stack levels, and Core Independent Peripherals (CIPs). Key features include eXtreme Low-Power (XLP) Sleep mode for battery-powered designs, Peripheral Pin Select (PPS) for flexible pin routing, an HLT (Hardware Limit Timer) peripheral, and on-chip debugging support. The Flash memory supports self read/write capability, enabling field firmware updates. The 32 MHz internal oscillator eliminates the need for an external crystal in most designs, reducing BOM cost and PCB footprint. Typical applications include IoT sensor nodes, white goods and appliance control, low-cost motor control, LED lighting drivers, and battery-powered portable devices. The wide 2.5V-5.5V supply range supports direct connection to single-cell Li-ion, two-cell AA, or 3.3V/5V regulated rails. The 14-pin TSSOP footprint balances I/O count with compact board area. When designing with this MCU, allocate sufficient decoupling (100 nF + 1 uF) near VDD pins and verify unused I/O pins are configured as outputs or inputs with internal pull-ups to minimize current leakage. The MCLR pin should be tied to VDD through a 10 kohm resistor unless in-circuit debugging is required. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们