集成电路

子分类

📁 ADC/DAC 2,700+ 产品 📁 放大器IC 1,100+ 产品 📁 音频编解码器 18 产品 📁 音频IC 2 产品 📁 时钟与计时 470+ 产品 📁 DSP 1,000+ 产品 📁 数据采集IC 2 产品 📁 数字电位器 4 产品 📁 显示驱动与控制器 1 产品 📁 FPGA与CPLD 6,800+ 产品 📁 接口IC 2,200+ 产品 📁 LED驱动器 1 产品 📁 逻辑IC 360+ 产品 📁 存储IC 870+ 产品 📁 微控制器 19,000+ 产品 📁 微处理器 4 产品 📁 电机驱动器 1 产品 📁 其他 1 产品 📁 Sensor and Detector Interfaces 1 产品 📁 专用IC 15 产品 📁 视频IC 13 产品

产品（35,000+)

PIC16LF707-E/PT - 8-bit MCU, 14KB Flash, 20MHz, 44-TQFP | Microchip
PIC16LF707-E/PT

PIC16LF707-E/PT - 8-bit MCU, 14KB Flash, 20MHz, 44-TQFP | Microchip

The Microchip Technology PIC16LF707-E/PT is a low-power 8-bit PIC microcontroller featuring 14KB Flash program memory, 20MHz maximum CPU speed, and a 44-pin TQFP (10x10 mm) package. It operates from 1.8V to 5.5V with an integrated 16MHz internal oscillator, targeting general-purpose embedded designs requiring XLP (eXtreme Low Power) sleep currents and rich analog integration. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash/ROM), data memory (RAM), and peripherals such as ADCs, timers, communication interfaces, and I/O. The 8-bit PIC16 family uses a RISC architecture with a 14-bit instruction word optimized for deterministic execution and low power, making MCUs of this class the workhorse of consumer appliances, sensor nodes, industrial controllers, and automotive body electronics. Key features of the PIC16LF707 include an integrated 16MHz high-precision internal oscillator that eliminates external crystals for many designs, an enhanced mid-range 14-bit instruction set, on-chip 10-bit ADC, multiple PWM/capture/compare (CCP/ECCP) modules, AUSART and I2C/SPI serial interfaces, and nanoWatt XLP sleep modes that drop quiescent current into the nanoampere range. The 44-pin TQFP provides 36 general-purpose I/O pins plus dedicated peripheral lines. Internally, the PIC16LF707 architecture separates program and data buses (Harvard architecture), supports self-programmability for bootloader-style updates, and offers configurable oscillator modes for switching between high-speed active operation and low-power sleep. The 'LF' designation confirms full 1.8V operation, distinguishing it from the PIC16F707 (2.5V-5.5V) variant. Typical applications include low-power sensor hubs, IoT edge nodes, battery-powered instrumentation, capacitive-touch human interfaces, LED lighting controllers, and industrial control front-ends. The wide voltage range makes it suitable for both 3.3V and 5V mixed-signal systems. When designing with this device, budget flash and RAM carefully against your application code size - 14KB Flash (8K x 14) and 363 bytes RAM are modest but adequate for state-machine style firmware. Always enable the brown-out reset (BOR) and watchdog timer for robust field operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
PIC16LF707-I/ML - 14KB Flash 8-bit MCU, 44-pin QFN | Microchip
PIC16LF707-I/ML

PIC16LF707-I/ML - 14KB Flash 8-bit MCU, 44-pin QFN | Microchip

The Microchip Technology PIC16LF707-I/ML is a low-power 8-bit RISC flash microcontroller with 14 KB of program memory and 363 bytes of RAM, housed in a 44-pin HVQCCN (QFN) exposed-pad package. It operates from 1.8 V to 3.6 V supply with internal oscillator support up to 16 MHz, integrating mTouch capacitive sensing, nanoWatt XLP extreme-low-power technology, AUSART, I2C/SPI, CCP, and a 14-channel 8-bit ADC. An 8-bit PIC microcontroller is a compact, deterministic computing core built on a Harvard RISC architecture, optimized for embedded control tasks where predictable timing, low power, and small footprint dominate. Within the broader taxonomy it sits below 32-bit ARM Cortex-M MCUs in complexity but above discrete logic in capability, filling the gap in cost-sensitive and power-constrained designs such as consumer white goods, sensor interfaces, and human-machine input panels. The 'LF' prefix denotes a wide-voltage, low-power variant suitable for battery-powered or energy-harvesting systems, distinguishing it from the F-variant that shares the same pinout but operates only at 2.3 V-5.5 V. Key features include hardware capacitive touch sensing via the on-chip mTouch module (no external touch IC needed), nanoWatt XLP sleep currents below 1 microampere, an integrated 16 MHz internal oscillator eliminating the external crystal in most designs, and a 14-channel 8-bit ADC for direct sensor conditioning. Peripherals include two comparators, an 8/16-bit timer, MSSP for I2C/SPI, an enhanced USART (AUSART) for RS-232/RS-485 links, and dual capture/compare/PWM modules for motor or LED control. The 44-pin QFN package gives compact PCB mounting with a thermal pad for heat spreading. The PIC16LF707 uses a 14-bit instruction word RISC core with a hardware stack and 35 single-word instructions, supporting interrupt-driven or polled firmware. Integrated POR, BOR, WDT, and low-voltage detection simplify firmware safety, while ICSP (In-Circuit Serial Programming) allows end-of-line firmware updates without removing the device. Typical applications include capacitive touch user interfaces, low-power IoT sensor nodes, home appliance control panels, LED lighting controllers, and battery-powered instrumentation. The mTouch and XLP combination makes it well suited to mains-powered or battery-driven touch HMIs. When designing with this device, bypass VDD with a 100 nF ceramic capacitor close to the IC and tie the exposed pad (EP) to a solid ground plane for thermal and electrical stability. Verify the supply headroom if the application runs near the 1.8 V lower limit; deep-sleep XLP modes require careful peripheral gating in firmware to achieve the datasheet's nanoamp quiescent currents. This page synthesizes distributor pricing, drop-in alternatives, and engineering design notes drawn from the Microchip PIC16(L)F707 datasheet, providing practical context that the bare datasheet alone does not.

询价 联系我们
PIC16LF707-I/MV - 8-bit MCU, 14KB Flash, mTouch, 40-UQFN | Microchip
PIC16LF707-I/MV

PIC16LF707-I/MV - 8-bit MCU, 14KB Flash, mTouch, 40-UQFN | Microchip

The Microchip Technology PIC16LF707-I/MV is an 8-bit PIC microcontroller featuring 14KB Flash program memory, an integrated mTouch capacitive touch sensing peripheral, and a 32-channel Capacitive Sensing Module (CSM), housed in a 40-pin UQFN (5x5 mm) package with industrial -40C to +85C temperature grade. An 8-bit microcontroller (MCU) is a small, low-cost computer-on-a-chip built around an 8-bit data path and is one of the most widely deployed computing platforms in embedded systems. Within the broader taxonomy, the PIC16LF707 sits under: microcontroller -> 8-bit MCU -> PIC16 family -> mid-range PIC16F/LF -> Microchip mid-range MCU architecture. These devices integrate CPU core, non-volatile Flash program memory, RAM, EEPROM data memory, and a rich set of peripherals (ADC, timers, communication, touch sensing) into a single IC, replacing discrete logic and reducing BOM cost. Key features include 14KB Flash (8K x 14 words), 20MHz maximum CPU clock, an integrated 16MHz internal oscillator (no external crystal required), 8-bit ADC with multiple channels, Capture/Compare/PWM (CCP) modules, hardware I2C/SPI and AUSART (Enhanced USART) serial interfaces, and Microchip's XLP (eXtreme Low Power) technology that delivers nanoWatt standby currents. The mTouch peripheral supports up to 32 capacitive touch channels, enabling robust touch button, slider, and proximity sensor implementations without external touch ICs. The PIC16LF707 utilizes Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word, providing deterministic interrupt latency and Harvard bus architecture. The device operates from 1.8V to 3.6V (the 'LF' low-voltage variant of the PIC16F707, which extends to 5.5V), making it suitable for battery-powered applications where the wider Vdd range and lower minimum voltage extend runtime on depleted cells. XLP technology enables deep sleep currents in the sub-microamp range, critical for always-on touch-sensing user interfaces in IoT and consumer appliances. Typical applications include capacitive touch user interfaces for appliances and consumer electronics, mTouch button replacement panels, capacitive proximity sensors, low-power IoT sensor nodes, battery-powered home automation controls, white goods control boards, and human-machine interface (HMI) front panels in industrial equipment. The wide operating voltage also makes it suitable for USB-powered embedded devices running from regulated 3.3V rails. When designing with the PIC16LF707-I/MV, ensure the PCB layout follows UQFN grounding recommendations: a continuous ground plane under the exposed pad (EP) is mandatory for thermal dissipation and electrical performance. Decouple VDD with a 100nF ceramic capacitor placed within 3mm of the supply pin, and add a bulk 1uF-10uF capacitor near the regulator. For mTouch designs, follow Microchip's AN1258 and AN1478 application notes for sensor PCB layout and noise immunity guidelines. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer or distributor page, providing engineers and procurement specialists with the consolidated information needed for component selection and BOM management.

询价 联系我们
PIC16LF707-I/P - 8-bit 20MHz 14KB Flash MCU 40-PDIP | Microchip
PIC16LF707-I/P

PIC16LF707-I/P - 8-bit 20MHz 14KB Flash MCU 40-PDIP | Microchip

The Microchip Technology PIC16LF707-I/P is an 8-bit Flash microcontroller from the PIC16F707/PIC16LF707 family, featuring 14 KB of program memory, 1.8 V to 3.6 V supply operation, and an integrated LCD driver in a 40-pin PDIP through-hole package. The device executes instructions at up to 20 MHz from an internal 16 MHz oscillator and is designed around Microchip's nanoWatt eXtreme Low Power (XLP) technology, making it suitable for battery-powered and energy-harvesting designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM and EEPROM), and programmable peripheral interfaces on one silicon die. The PIC16LF707 belongs to the PIC16 mid-range 8-bit family, sitting hierarchically within Microchip's broader product tree of 8-bit PIC MCUs > 16-bit PIC24 and dsPIC > 32-bit PIC32. Its peripheral set includes a 14-channel 8-bit ADC, multiple Capture/Compare-to-PWM (CCP/ECCP) modules, an mTouch capacitive touch sensing peripheral, AUSART, I2C, SPI, and an LCD driver capable of driving up to 192 segments. Key differentiating features include 36 I/O pins, 8 K x 14 words of Flash program memory, hardware LCD segment driver, ultra-low-power sleep modes (down to approximately 20 nA), and on-chip debugging via the In-Circuit Serial Programming (ICSP) interface. The 40-pin PDIP form factor is through-hole with a 2.54 mm pin pitch and a maximum seated height of 1 mm above the PCB. Operating temperature spans -40C to +85C industrial grade. Architecturally, the PIC16LF707 uses a Harvard RISC core with a 14-bit instruction word, single-cycle execution except for branches, a hardware multiplier, and an interrupt controller with 31 sources. The LCD driver integrates charge pumps, contrast bias generation, and configurable timing to drive segment LCDs directly without an external driver IC. Typical applications include battery-powered consumer products with segment LCD displays, home appliances (washing machines, microwave ovens), industrial control panels, metering equipment, low-cost embedded user interfaces, capacitive touch sensing keypads, and low-power IoT sensor nodes with visual feedback. The wide operating voltage range (1.8 V to 3.6 V) permits direct connection to two alkaline cells, a single Li-ion cell, or a 3.3 V regulated system rail. When designing, place a 100 nF decoupling capacitor within 5 mm of VDD, route the MCLR pull-up to VDD via 10 kohm, and reserve space for an ICSP header for in-field firmware updates.

询价 联系我们
PIC16LF707-I/PT - 8-Bit 20MHz 14KB Flash MCU 44-TQFP | Microchip
PIC16LF707-I/PT

PIC16LF707-I/PT - 8-Bit 20MHz 14KB Flash MCU 44-TQFP | Microchip

The Microchip Technology PIC16LF707-I/PT is an 8-bit PIC® microcontroller from the PIC16F707/PIC16LF707 family, built on Microchip's nanoWatt XLP extreme-low-power technology and integrating an mTouch™ capacitive touch sensing peripheral. The device runs at up to 20 MHz instruction clock, packs 14 KB (8K × 14) of self-programmable Flash program memory, 363 bytes of RAM, and 256 bytes of EEPROM, and ships in a 44-pin TQFP package (10 × 10 mm, 1 mm height). What is a PIC16 8-bit microcontroller? It is a RISC-based Harvard-architecture MCU from Microchip with separate program and data buses, an instruction set optimized for compact code, and integrated peripherals such as ADC, timers, comparators, PWM, and communication modules. Within Microchip's portfolio, PIC16 sits between the simpler PIC10/12/14 families and the higher-pin-count PIC18 and dsPIC families, and is widely used in cost-sensitive, low-power embedded applications including capacitive-touch user interfaces and battery-powered IoT nodes. Key features of the PIC16LF707-I/PT include an integrated LCD driver supporting up to 128 segments, an 8-channel 8-bit ADC, multiple capture/compare/PWM (CCP/ECCP) modules, AUSART, I2C™/SPI, a 16 MHz internal oscillator (1% calibrated), and nanoWatt XLP modes with typical sleep currents in the sub-microamp range. The wide 1.8 V–3.6 V supply range (LF variant) supports battery operation down to two alkaline cells, and 36 I/O pins provide generous connectivity. Internally the PIC16LF707 uses a modified Harvard core with a 14-bit instruction word, 8-level hardware stack, and on-chip in-circuit serial programming (ICSP) plus in-circuit debugging via ICD. The internal 16 MHz oscillator can be software-tuned, removing the need for external resonators in many designs and reducing BOM cost. Typical applications include capacitive-touch human-interface panels using mTouch, low-power LCD-based home appliances, thermostats and metering displays, remote controls, sensor transmitter modules, and any 8-bit node that benefits from segmented LCD driving. Industrial-grade -40 °C to +85 °C operation covers most outdoor and factory environments. When designing with this device, allocate a 10 nF–100 nF decoupling capacitor on VDD and consider Microchip's mTouch™ Sensing Solutions documentation for electrode layout, guard-ring patterns, and SNR tuning. For lowest power, use the LF variant's deep-sleep modes and gate peripheral clocks individually. This page synthesizes distributor pricing, drop-in same-package alternatives, and engineering design notes not found in the manufacturer datasheet alone.

询价 联系我们
PIC16LF707T-I/ML - 14KB Flash 8-bit MCU w/ LCD Driver | Microchip
PIC16LF707T-I/ML

PIC16LF707T-I/ML - 14KB Flash 8-bit MCU w/ LCD Driver | Microchip

The Microchip Technology PIC16LF707T-I/ML is an 8-bit PIC microcontroller with 14KB of Flash program memory, packaged in a 44-pin QFN (ML) with exposed pad, supplied in Tape & Reel. It belongs to the PIC16F707/PIC16LF707 family of Flash-based, 8-bit CMOS microcontrollers with integrated LCD driver and nanoWatt XLP (eXtreme Low Power) technology, and supports the mTouch capacitive touch sensing peripheral. The LF variant operates across 1.8V to 3.6V with internal oscillator support up to 16 MHz. An 8-bit PIC microcontroller (MCU) is a compact, deterministic, RISC-based single-chip computer that integrates CPU, Flash program memory, SRAM data memory, EEPROM, and a rich set of peripherals (timers, ADC, communication ports, I/O). It sits within the broader hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor. The PIC16F family is the workhorse mid-range 8-bit line from Microchip, optimised for ultra-low-power and mixed-signal applications such as consumer appliances, metering, and human-machine interfaces with LCD displays. Key features of the PIC16LF707T-I/ML include 14KB Flash program memory, 363 bytes SRAM, 256 bytes EEPROM, an integrated LCD driver with up to 192 segments, a 12-channel 8-bit ADC, multiple capture/compare/PWM modules, and nanoWatt XLP technology with sleep currents as low as a few nanoamps. The device provides 36 I/O pins across a 44-pin QFN package with an exposed thermal pad for improved heat dissipation, and operates across the industrial temperature range of -40C to +85C. Architecturally, the PIC16LF707 uses a Harvard RISC core with only 35 single-word instructions (excluding branches), a deep 14-bit instruction word, and a flexible peripheral set mapped through Peripheral Pin Select (PPS) where supported. The on-chip LCD driver with variable bias and contrast control is hardwired to specific port pins, eliminating the need for an external LCD controller in many cost-sensitive designs. Typical applications include battery-powered metering (electricity, gas, water) with LCD readouts, white goods and small appliance front panels, e-paper / segment LCD instrumentation, capacitive touch (mTouch) keypads for IoT and consumer products, and any low-power embedded system that needs on-board display capability without an external LCD controller. When designing with this part, ensure the exposed thermal pad of the QFN is soldered to a sufficient ground copper pour (typically at least 25 mm^2) for mechanical reliability and thermal performance. For LCD applications, follow the bias and contrast network recommendation in the datasheet to avoid ghost segments, and provide adequate bulk capacitance on Vdd because the LCD charge pump can create brief load transients. This page synthesises distributor pricing, verified drop-in alternatives in the same 44-pin QFN package, design notes not found in the manufacturer datasheet, and practical comparator context not available on single-distributor product pages.

询价 联系我们
PIC16LF72-I/ML - 8-bit 20MHz 3.5KB Flash MCU | Microchip
PIC16LF72-I/ML

PIC16LF72-I/ML - 8-bit 20MHz 3.5KB Flash MCU | Microchip

The Microchip Technology PIC16LF72-I/ML is an 8-bit RISC microcontroller IC running at 20MHz, integrating 3.5KB (2K x 14) of Flash program memory alongside 128 bytes of RAM and 22 digital I/O lines, housed in a 28-pin QFN (6x6 mm) package with an exposed thermal pad. An 8-bit microcontroller (MCU) is a small programmable computer-on-a-chip that integrates a CPU, memory, and peripherals into a single IC. The PIC16 family belongs to the broader category of microcontrollers (MCU) -> embedded processors -> semiconductors. The "LF" prefix denotes the extended low-voltage operating range typical of battery-friendly designs, while the "16F" core implements Microchip's enhanced Harvard RISC architecture with a single-cycle instruction set, making it well-suited for deterministic real-time control where predictability matters more than raw throughput. Key features include five 10-bit ADC input channels for analog sensing, support for I2C and SPI serial communication, three timer modules, a PWM module, and an internal 8MHz oscillator with configurable clock options. Brown-out reset (BOR) and power-on reset (POR) peripherals protect Flash integrity during unstable supply events, while the watchdog timer (WDT) recovers the system from software lockups. The wide 2.0V to 5.5V supply range simplifies designs powered by 2-cell batteries, USB, or regulated 5V rails. Architecturally, the device separates program and data buses (Harvard), allowing simultaneous fetch and operand access. The 14-bit instruction word keeps code density high - 3.5KB holds roughly 2,800 single-word instructions. An integrated analog comparator complements the ADC for mixed-signal feedback loops, and the In-Circuit Serial Programming (ICSP) interface enables field updates via two pins without removing the part from the board. Typical applications include consumer appliances, motor control front-ends, low-cost sensor hubs, LED lighting controllers, and battery-powered instrumentation. The exposed thermal pad on the QFN package improves dissipation in space-constrained layouts, and the 22 I/O lines can be remapped to analog or alternate peripheral functions through the configuration registers. When designing with this MCU, allocate ADC channels carefully because the five available inputs are shared with digital I/O and require explicit register configuration to repurpose. Decouple VDD with a 0.1 uF ceramic capacitor placed within 5 mm of the pins and provide a bulk capacitor near the supply source to suppress inrush current from the ADC reference. This page synthesizes live distributor pricing, carefully matched drop-in alternatives, and practical design notes drawn from the Microchip PIC16LF72 datasheet, providing value beyond any single source.

询价 联系我们
PIC16LF72-I/SO - 8-Bit 20MHz MCU 3.5KB FLASH | Microchip
PIC16LF72-I/SO

PIC16LF72-I/SO - 8-Bit 20MHz MCU 3.5KB FLASH | Microchip

The Microchip Technology PIC16LF72-I/SO is an 8-bit RISC microcontroller from the PIC® 16F family, featuring a 20MHz maximum clock frequency, 3.5KB (2K x 14) of FLASH program memory, and 128 bytes of data RAM in a 28-pin SOIC wide-body package. The 'LF' suffix indicates low-voltage operation from 2V to 5.5V, drawing a fraction of the current consumed by standard PIC16F devices at the same clock speed. A microcontroller (MCU) is a single-chip computer with CPU, RAM, non-volatile program memory, and peripherals integrated on one die; PIC16F-series parts use an enhanced Harvard RISC architecture with 14-bit wide instructions and a small, fixed instruction set. The PIC16LF72 sits inside that hierarchy as a general-purpose 28-pin mid-range MCU, between the smaller PIC16C7X family and the larger PIC16F87x family. This taxonomy helps engineers select the right part for power, I/O, peripheral and memory requirements. Key features include 22 digital I/O pins, an integrated 8-bit A/D converter with 5 input channels, two 8-bit timers plus one 16-bit timer, a synchronous serial port (SSP) supporting SPI and I2C, and a universal synchronous/asynchronous receiver-transmitter (USART). CMOS FLASH technology enables in-circuit serial programming (ICSP) and 100,000 erase/write cycle endurance, allowing field firmware updates. The device consumes less than 2 mA at 5V/4MHz and less than 20 µA at 3V/32kHz, qualifying it for battery-powered designs. Typical applications include industrial control panels, low-power remote sensor nodes, small appliance controllers, automotive body and accessory modules (AEC-Q100 grade not qualified - choose PIC16F72-I/SO or PIC16F72T-I/SO for the same family in automotive), white-goods motor control, and LED lighting controllers. The wide 2.0V–5.5V operating range allows direct connection to a single Li-ion cell, a 3.3V regulated rail, or a regulated 5V supply. When designing with this MCU, place a 100 nF decoupling capacitor within 5 mm of each VDD pin and a single 10 µF bulk capacitor on the main supply rail. Reserve the MCLR pin with a 10 kΩ pull-up to VDD; failure to do so leaves the device in reset during normal operation. Program the configuration bits to enable the internal RC oscillator if no external crystal is present, freeing two I/O pins.

询价 联系我们
PIC16LF72-I/SP - 8-Bit 20MHz MCU, 3.5KB Flash, 28-SPDIP | Microchip
PIC16LF72-I/SP

PIC16LF72-I/SP - 8-Bit 20MHz MCU, 3.5KB Flash, 28-SPDIP | Microchip

The Microchip Technology PIC16LF72-I/SP is an 8-bit RISC flash microcontroller from the PIC16LF7x family, offering 20 MHz maximum clock speed, 3.5 KB (2K x 14) of Flash program memory, and 128 bytes of data RAM in a 28-pin SPDIP through-hole package. The device features an integrated 8-channel, 8-bit ADC, two 8-bit timers and one 16-bit timer, a Capture/Compare/PWM (CCP) module, and supports both I²C and SPI communication interfaces through 22 digital I/O pins. Operating from 2.0 V to 5.5 V, the LF prefix indicates the low-voltage, low-power F-variant built on CMOS technology for industrial temperature range (-40 °C to +85 °C). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, peripheral modules (ADC, timers, communication ports), and digital I/O into one package. Microcontrollers sit within the hierarchy: 8-bit MCU -> RISC microcontroller -> embedded controller -> semiconductor IC. The 8-bit class is optimized for cost-sensitive, deterministic control tasks where ease of programming and low power consumption matter more than raw compute throughput, making it a foundation of industrial automation, appliance control, and consumer electronics. Key features include 35 single-word instructions with 200 ns instruction execution time, a hardware multiplier-less PIC16 RISC core, Brown-out Reset (BOR), Power-on Reset (POR), Watchdog Timer (WDT) with on-chip RC oscillator, and a programmable code protection mechanism. The 8-bit ADC provides 8 channels of 8-bit resolution, ideal for sensor signal acquisition in mixed-signal embedded designs. The PIC16LF72 architecture uses a Harvard bus structure with separate code and data paths, allowing instruction fetch and operand read in the same cycle. Its CMOS process and sleep-mode current of < 1 µA make it suitable for battery-powered or energy-harvesting designs where duty-cycling is essential. Typical applications include industrial sensor interfaces, motor and pump controllers, automotive body modules, HVAC control nodes, and battery-operated instrument front-ends. The wide operating voltage window (2.0 V–5.5 V) supports direct Li-ion battery operation as well as regulated 5 V rails. When designing with this MCU, place decoupling capacitors (100 nF plus 10 µF bulk) close to VDD/SS pins, route the MCLR pin through a 10 kΩ pull-up, and ensure the in-circuit serial programming (ICSP) header is accessible for field firmware updates. The 28-pin SPDIP package is hand-solder-friendly and ideal for prototype and low-volume production. This page synthesizes current distributor stock and pricing, drop-in PIC16 family alternatives, and practical design notes that go beyond the manufacturer datasheet to accelerate your component selection.

询价 联系我们
PIC16LF72-I/SS - 8-Bit 20MHz MCU, 3.5KB Flash 28-SSOP | Microchip
PIC16LF72-I/SS

PIC16LF72-I/SS - 8-Bit 20MHz MCU, 3.5KB Flash 28-SSOP | Microchip

The Microchip Technology PIC16LF72-I/SS is an 8-bit RISC Flash microcontroller (MCU) based on the PIC16 core, delivering up to 20 MHz operation with 3.5 KB (2K x 14) of Flash program memory and 128 bytes of data RAM in a 28-pin SSOP package. It offers 22 digital I/O pins, a 5-channel 8-bit ADC, two 8-bit timers plus one 16-bit timer, an SPI/I2C-compatible synchronous serial port, and a USART for asynchronous serial communication. The wide 2.0V to 5.5V supply range supports both battery and 5V-regulated rails typical of the LF family. An 8-bit microcontroller is a single-chip computer built around an 8-bit data path, optimized for low cost, deterministic real-time control, and ease of programming. Within the broader taxonomy, the PIC16LF72 belongs to the PIC microcontroller family > 8-bit MCU > Flash microcontroller > embedded microcontroller > integrated circuit > semiconductor. Its low-voltage (LF) variant specifically targets battery-powered and energy-efficient designs, while the PIC16 instruction set is fully upward-compatible with newer PIC16 enhanced cores, easing firmware migration. Key features include a Harvard-architecture RISC CPU with 35 single-cycle instructions, 14-bit instruction word, 8-level hardware stack, and a programmable code-protection mechanism. The integrated brown-out-reset and power-on-reset improve field reliability, and the Flash-based program memory enables rapid in-system reprogramming via ICSP. The device operates over the -40C to +85C industrial temperature range, making it suitable for commercial and industrial embedded control. Typical applications span consumer-electronics remote controls, small appliance motor control, sensor signal conditioning front-ends, simple protocol bridges (USART/I2C/SPI), and battery-backed instrumentation. The PIC16LF72's combination of small package footprint, integrated analog and serial peripherals, and low-voltage operation makes it a popular choice when a full PIC16 mid-range MCU is not required. A key design consideration is the ADC acquisition-time and source-impedance budget: with a recommended source impedance below 10 kohm, an external op-amp buffer may be required when reading high-impedance sensors. Designers should also place a 0.1 uF decoupling capacitor within 5 mm of VDD and route analog/digital grounds back to a single star point to minimize conversion noise.

询价 联系我们
PIC16LF720-E/ML - 8-Bit 16MHz MCU, 3.5KB Flash, 20-QFN | Microchip
PIC16LF720-E/ML

PIC16LF720-E/ML - 8-Bit 16MHz MCU, 3.5KB Flash, 20-QFN | Microchip

The Microchip Technology PIC16LF720-E/ML is an 8-bit PIC microcontroller featuring a 16MHz internal oscillator, 3.5KB (2K x 14 words) of self-read/write Flash program memory, 128 bytes of SRAM, and 36 I/O pins (18 functional I/O), packaged in a 20-lead QFN (4x4 mm) with an exposed thermal pad. It operates from a 2.3V to 3.6V supply, includes nanoWatt XLP ultra-low-power technology, and provides I2C, SPI, and AUSART (UART) connectivity along with CCP/PWM, 12-channel 8-bit ADC, brown-out reset, watchdog timer, and power-on reset peripherals. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals. The PIC16F/LF720 belongs to Microchip's mid-range PIC16 family, which sits between the baseline 8-bit PIC10/12/16 cores and the high-performance PIC18/dsPIC families. Mid-range PIC16 parts use a 14-bit instruction word with 35 instructions, providing a balance of code density, deterministic timing, and low power consumption that makes them popular for cost-sensitive embedded applications. Key features of the PIC16LF720 include its nanoWatt XLP technology, which delivers sleep currents down to the nanoampere range, making the part suitable for battery-powered designs with multi-year standby requirements. The 25mA source/sink capability on I/O pins allows direct drive of LEDs and small relays without buffering. Internal 16MHz oscillator accuracy eliminates the need for an external crystal in most applications, reducing BOM cost and PCB area. Typical applications include consumer electronics, remote controls, sensor interfaces, low-power wireless nodes, home appliances, and industrial control subsystems where 8-bit processing, low power, and small footprint are essential. The PIC16LF720 prefix (LF) denotes the low-voltage (2.3V-3.6V) variant, while the F720 prefix (without LF) covers the wider 1.8V-5.5V part. The /ML suffix indicates the 20-QFN package. When designing with this MCU, ensure decoupling capacitors are placed close to VDD and the exposed pad is soldered for proper thermal dissipation and ground connection. For applications requiring more than 3.5KB of code, evaluate PIC16F721 (7KB Flash) or PIC16F1933 (enhanced mid-range core) as migration paths within the same footprint family.

询价 联系我们
PIC16LF720-E/P - 8-Bit 16MHz MCU, 3.5KB Flash, 20-PDIP | Microchip
PIC16LF720-E/P

PIC16LF720-E/P - 8-Bit 16MHz MCU, 3.5KB Flash, 20-PDIP | Microchip

The Microchip Technology PIC16LF720-E/P is an 8-bit PIC microcontroller featuring a 16MHz CPU core, 3.5KB (2K x 14 words) of Flash program memory, and a 20-pin PDIP through-hole package designed for the low-voltage (LF) supply range. It belongs to the PIC16 (L)F720/721 family of 20-pin Flash MCUs with NanoWatt XLP Technology, engineered for low-power embedded applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash/RAM/EEPROM), and peripherals on one die. Within the embedded hierarchy, MCUs sit below microprocessors (MPUs) and above discrete logic in the system architecture. The PIC16 family uses a Harvard-architecture RISC core with a 14-bit instruction word, well known for deterministic execution and a compact, easy-to-learn instruction set. The "LF" prefix designates the low-voltage variant operating from 2.3V to 3.6V, while the "F720" part number identifies the 20-pin device with NanoWatt XLP (eXtreme Low Power) technology. Key features of the PIC16LF720-E/P include 128 bytes of RAM, 256 bytes of EEPROM data memory, up to 18 digital I/O pins, an enhanced USART, MSSP (SPI/I2C), two 8-bit timers, one 16-bit timer, a 12-bit ADC with up to 12 channels, and a 5-bit DAC. XLP technology enables sleep currents below 1 microampere, and the device supports multiple low-power wake events including interrupt-on-change, timer overflow, and peripheral triggers. The 20-pin PDIP package offers a through-hole footprint that simplifies breadboarding, hand-soldering, and legacy board designs. The -E suffix indicates the Extended operating temperature range of -40C to +125C, qualifying the device for industrial and harsh-environment applications. Internal oscillator options support up to 16MHz without an external crystal, reducing BOM cost and PCB area. Typical applications include battery-powered sensor nodes, low-power IoT edge devices, consumer remote controls, simple motor control loops, LED lighting controllers, and industrial automation peripherals where the through-hole PDIP package and extended temperature range are advantageous. Designers should configure the configuration bits (CONFIG) for oscillator selection, watchdog timer, low-voltage programming, and code protection prior to programming. The ICSP (In-Circuit Serial Programming) interface shares pins with PGED/PGEC, which must be reserved on the PCB. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement the Microchip datasheet, providing engineers with a single reference for sourcing and replacement analysis.

询价 联系我们
PIC16LF720-E/SS - 8-Bit MCU, 16MHz, 3.5KB Flash, 20-SSOP | Microchip
PIC16LF720-E/SS

PIC16LF720-E/SS - 8-Bit MCU, 16MHz, 3.5KB Flash, 20-SSOP | Microchip

The Microchip Technology PIC16LF720-E/SS is a low-power 8-bit PIC microcontroller built on the mid-range RISC core with 35 instructions, delivering 16 MIPS at 16 MHz from a 3.5 KB (2K x 14) self-read/write Flash program memory, packaged in a 20-pin SSOP. It targets battery-friendly embedded designs with Microchip's nanoWatt XLP technology, 128 B SRAM, and a wide 1.8 V to 3.6 V operating range. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, volatile data memory, and peripherals around an 8-bit data path. PIC mid-range MCUs sit within Microchip's broader family of 8-bit microcontrollers (PIC10/12/14/16/18) under the larger umbrella of microcontrollers, embedded controllers, and finally semiconductors. Engineers select the PIC16LF720 family when they need low active and sleep current, deterministic interrupt latency, and on-chip peripherals like ADC, I2C, SPI, AUSART, and CCP in a small-footprint surface-mount package. Key features include 18 I/O pins with 25 mA source/sink capability, 12-channel 8-bit ADC, two 8-bit timers (TMR0/TMR2) plus one 16-bit timer (TMR1), an internal 16 MHz oscillator, and nanoWatt XLP sleep currents that make the part suitable for coin-cell and energy-harvesting applications. The E temperature grade extends the operating range from -40 C to +125 C, qualifying the device for industrial and automotive-adjacent environments. The architecture relies on a Harvard-style RISC engine with 8 stack levels, hardware-accelerated interrupt context saving, and a self-programmable Flash that supports in-circuit serial programming (ICSP). The internal oscillator eliminates an external crystal in many designs, reducing BOM cost and PCB area while the WDT, POR, and BOR improve system robustness during brown-out and code-runaway events. Typical applications include low-power sensor nodes, battery-powered consumer devices, automotive interior modules, industrial control subsystems, and USB-to-UART bridges using the AUSART peripheral. The 128 B SRAM and 3.5 KB Flash are sized for compact state machines, sensor fusion pre-processing, and protocol translation firmware. When designing with this part, choose the LF (low-voltage F) variant when VDD stays under 3.6 V, and pair the device with a 0.1 uF + 10 uF decoupling network near VDD. Programming via ICSP requires the standard PGD/PGC/VDD/VSS/MCLR/RB6/RB7 connections, so leave those test points accessible during layout review. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
PIC16LF720-I/ML - 8-bit MCU, 16MHz, 3.5KB Flash, 20-QFN | Microchip
PIC16LF720-I/ML

PIC16LF720-I/ML - 8-bit MCU, 16MHz, 3.5KB Flash, 20-QFN | Microchip

The Microchip Technology PIC16LF720-I/ML is an 8-bit PIC microcontroller built on the enhanced mid-range core, operating at up to 16MHz with 3.5KB (2K x 14) of Flash program memory, housed in a 20-pin QFN (4x4 mm) package. It integrates 128 bytes of SRAM, 18 general-purpose I/O pins, and nanoWatt XLP ultra-low-power technology for battery-powered applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash), data memory (RAM), and peripheral interfaces. The PIC16F family is part of Microchip's PIC microcontroller hierarchy, sitting between the baseline 8-bit PIC10/12/16 cores and the 16-bit dsPIC/PIC24 line. Within the PIC16F family, the PIC16LF720 belongs to the mid-range enhanced PIC16F7xx series, optimized for low-voltage and low-power operation with supply voltages as low as 1.8V. Key features include a 10-bit Analog-to-Digital Converter (ADC) with input multiplexing, multiple timer modules (Timer0, Timer1, Timer2), Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) with LIN support, Master Synchronous Serial Port (MSSP) for SPI and I2C, and on-chip oscillator options. The nanoWatt XLP technology delivers sleep currents as low as [DATA_NEEDED: nA sleep current] and active currents in the microamp range, making it well-suited for energy-harvesting and always-on applications. Architecturally, the PIC16LF720 uses a 14-bit instruction word with single-cycle execution (except branches), a hardware stack for interrupts, and a deterministic instruction set. The wide operating voltage range from 1.8V to 3.6V accommodates both single-cell Li-ion and dual-cell alkaline battery topologies, while the 16MHz clock delivers 8 MIPS of throughput, sufficient for sensor fusion, simple user interfaces, and basic motor control loops. Typical applications include battery-powered sensor nodes, remote controls, low-power IoT edge devices, consumer electronics with button/Touch interfaces, small appliance control, and industrial telemetry. The compact 4x4 mm QFN package and integrated peripherals allow designs to fit into space-constrained enclosures without external ADC or EEPROM components. When designing with this MCU, careful attention must be paid to the in-circuit serial programming (ICSP) pin assignments and the configuration word bits that govern oscillator selection, watchdog timer, and code protection. The QFN package requires thermal pad soldering to the PCB ground plane for mechanical reliability and electrical thermal performance. This page synthesizes distributor pricing, drop-in compatible alternatives from the PIC16LF7xx family, and practical design notes not found in the bare datasheet, helping engineers select and source the PIC16LF720-I/ML for low-power embedded designs.

询价 联系我们
PIC16LF720-I/P - 8-bit 16MHz MCU 3.5KB Flash | Microchip
PIC16LF720-I/P

PIC16LF720-I/P - 8-bit 16MHz MCU 3.5KB Flash | Microchip

The Microchip PIC16LF720-I/P is a low-power 8-bit PIC microcontroller from the PIC16F family, delivering 16 MIPS performance at 16 MHz CPU clock in a 20-pin PDIP through-hole package. It integrates 3.5 KB (2K x 14 words) of self-programmable Flash program memory, 128 bytes of SRAM data memory, and 18 general-purpose I/O pins. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data bus and Harvard or modified-Harvard architecture. The PIC16F family belongs to Microchip's mid-range 14-bit instruction set, which sits between the baseline 12-bit PIC10/12 families and the enhanced 16-bit PIC18F and 16-bit dsPIC families. Within the broader taxonomy, an MCU is a microprocessor IC -> microcontroller -> 8-bit microcontroller -> mid-range 8-bit MCU -> PIC16F sub-family, used universally in embedded control where deterministic instruction execution and ultra-low sleep current matter. Key features include a 16 MHz internal/external oscillator option, an 8-channel 8-bit Analog-to-Digital Converter (ADC), two 8-bit timers plus one 16-bit timer, a USART module, and nanoWatt XLP extreme-low-power technology enabling standby currents under 1 uA. The device operates from 1.8 V to 3.6 V across the industrial -40C to +85C temperature range, making it well-suited for battery-powered and energy-harvesting designs. Architecturally, the PIC16LF720 uses a RISC core with 35 single-cycle instructions, 14-bit instruction word, and a hardware stack that simplifies firmware portability across the PIC16F1xxx family. Integrated peripherals such as the enhanced Capture/Compare/PWM (ECCP) module, master I2C/SPI interface, and 11-bit ADC reduce external component count and BOM cost. The 'LF' prefix denotes an extended low-voltage variant, while 'I' denotes industrial temperature grade and '/P' denotes PDIP packaging. Typical applications include consumer white goods control panels, low-end remote-control transmitters, LED driver controllers, battery-powered sensor nodes, small appliance motor control, and IoT edge nodes where low sleep current directly determines battery life. Engineers often pair it with a low-power RF transceiver such as the MRF89XA sub-GHz module. A key design consideration is decoupling: place a 100 nF ceramic capacitor as close as possible between VDD and VSS pins to suppress switching noise. The MCLR reset pin should be tied to VDD through a 10 kohm pull-up for reliable operation, and unused I/O pins must be configured as outputs low to minimize leakage current in sleep mode. This page synthesizes distributor pricing, drop-in PIC16F family alternatives, and practical design notes not consolidated in the manufacturer datasheet - giving embedded engineers a single reference for footprint-compatible replacements and application guidance.

询价 联系我们
PIC16LF720-I/SO - 8-Bit MCU, 16MHz, 3.5KB Flash, 20-SOIC | Microchip
PIC16LF720-I/SO

PIC16LF720-I/SO - 8-Bit MCU, 16MHz, 3.5KB Flash, 20-SOIC | Microchip

The Microchip Technology PIC16LF720-I/SO is an 8-bit PIC RISC microcontroller with nanoWatt XLP ultra-low-power technology, 3.5KB (2K x 14) of self-read/write Flash program memory, 128 bytes of SRAM, and a 16MHz internal oscillator, housed in a 20-pin SOIC (300 mil) industrial-temperature package. Operating from 1.8V to 3.6V (LF variant for low-voltage systems), it delivers up to 16 MIPS and provides on-chip peripherals including a 12-channel 8-bit ADC, one 8-bit and two 16-bit timers, an enhanced CCP module, and serial interfaces (I2C, SPI, AUSART). An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path that executes one instruction per clock cycle (with pipelining) and integrates CPU, RAM, non-volatile program memory (Flash/ROM), and peripherals on a single die. PIC microcontrollers from Microchip use a Harvard RISC architecture optimized for deterministic interrupt response and very low active/idle current, sitting within the broader hierarchy of microcontrollers -> embedded processors -> semiconductors. The "LF" prefix denotes the low-voltage/fabrication variant of the PIC16F720 family, enabling battery applications that the standard "F" parts cannot reach because of higher minimum VDD. Key features of the PIC16LF720 include the nanoWatt XLP power-management family with typical 5 nA sleep current, 8 MHz internal oscillator, 36 I/O capable pins (of which 18 are bonded out on the 20-pin SOIC), 25 mA source/sink I/O drive, in-circuit serial programming (ICSP) via two pins, and a watchdog timer with on-chip low-power 31 kHz oscillator. The device draws roughly 1.6 mA active at 4 MHz from 3V. Architecturally, the PIC16LF720 uses a 14-bit instruction word, an 8-level hardware stack, and dedicated peripheral interrupt logic. Memory is organized into a 2K-word Flash program space, 128 bytes of general-purpose SRAM, and 128 bytes of non-volatile EEPROM-style data storage, supporting field self-programming. Power-saving modes (Run, Idle, Sleep) are coordinated by the XLP controller that gates clocks per-peripheral, enabling systems to spend the majority of their time in deep sleep. Typical applications include battery-powered sensor nodes, wearable fitness/health monitors, remote control key fobs (RF or IR), IoT edge devices, low-power consumer products, and home automation endpoints. The SOIC-20 footprint is also widely used as a generic MCU in industrial control daughter-cards where the larger PIC16F-family variants are over-specified. When designing with this MCU, decouple VDD with a 100 nF plus 1 uF pair, keep ICSP/ICDAT pins reachable through test pads or a header, and budget for the watchdog and Brown-Out Reset (BOR) to recover from low-voltage brownouts in battery designs. The LF silicon (vs. standard F) matters: a design that requires >3.6V VDD must use the PIC16F720 instead. This page synthesizes distributor pricing from DigiKey and Mouser, drop-in same-package alternatives from the PIC16 family (PIC16F720-I/SO, PIC16LF721-I/SO), and XAIPART's Site MPN set, all wrapped with practical design notes that you will not find in the bare manufacturer datasheet.

询价 联系我们
PIC16LF720T-I/ML - 8-bit MCU, 16MHz, 3.5KB Flash, 20-QFN | Microchip
PIC16LF720T-I/ML

PIC16LF720T-I/ML - 8-bit MCU, 16MHz, 3.5KB Flash, 20-QFN | Microchip

The Microchip Technology PIC16LF720T-I/ML is a low-power 8-bit PIC microcontroller built on the enhanced mid-range core, delivering 16 MIPS performance and packaged in a 20-pin QFN (4x4 mm) with exposed pad. It integrates 3.5 KB (2K x 14) of self-read/write Flash program memory, 128 bytes of RAM, and 36 I/O lines, and operates from a 1.8V to 3.6V supply (the LF variant) targeting battery-powered applications. The IC also provides on-chip 16 MHz internal oscillator, 12-channel 8-bit ADC, and nanoWatt XLP power-saving technology. Key features include 16 MHz CPU speed (8 MHz instruction rate at 2:1 Fcycle/Finstruction ratio), 128 B SRAM, 36 I/O, internal 16 MHz oscillator, and a peripheral set of I²C, SPI, AUSART, CCP capture/compare/PWM, two 8-bit timers (TMR0/TMR2), one 16-bit timer (TMR1), watchdog timer, power-on reset, brown-out reset, and in-circuit serial programming. The low-voltage LF prefix makes the part suitable for 2.3V–3.6V operation while sharing the same die as the F (5V) variants. A PIC microcontroller (Peripheral Interface Controller) is a Harvard-architecture RISC MCU family from Microchip, widely used in embedded control. In the system hierarchy it sits as: PIC16 family -> mid-range 8-bit core -> microcontroller -> embedded computing -> semiconductor. The PIC16(L)F720/721 family targets cost-sensitive, low-power applications such as remote controls, sensor nodes, and small appliances. The PIC16LF720T-I/ML uses a 14-bit instruction word, runs 35 instructions with 8 hardware stack levels, and supports 25 mA source/sink per I/O for direct LED drive. The 20-QFN (4x4) package includes an exposed thermal pad that must be soldered to the ground plane for rated thermal performance and reliable operation across the -40 °C to +85 °C industrial temperature range. Typical applications include battery-powered sensor nodes, IoT endpoints, LED lighting controllers, low-power consumer devices, and small home appliances. The wide 1.8V–3.6V range makes the part well suited for systems powered by two alkaline, NiMH, or single Li-ion cells. When designing with this device, ensure the exposed pad of the QFN is thermally and electrically bonded to the PCB ground plane to meet the 31.4 °C/W theta-JA specification. MPLABX assigns peak and average current budgets based on the selected clock mode and ADC sample rate, which should be validated against the application's nanoWatt XLP target. This page synthesizes distributor pricing, drop-in same-family alternatives, and QFN PCB layout notes not consolidated on a single datasheet excerpt.

询价 联系我们
PIC16LF720T-I/SO - 3.5KB Flash 8-bit MCU 20-Pin SOIC | Microchip
PIC16LF720T-I/SO

PIC16LF720T-I/SO - 3.5KB Flash 8-bit MCU 20-Pin SOIC | Microchip

The Microchip PIC16LF720T-I/SO is a low-power 8-bit PIC RISC microcontroller with 3.5KB Flash program memory, 128 bytes SRAM, and 18 digital I/O pins, housed in a 20-pin SOIC (W) package supplied on Tape & Reel. According to the Microchip datasheet, it operates from 1.8V to 3.6V (with 2.3V to 3.6V as the typical VDD range for full-speed operation), runs at up to 16 MHz instruction clock, and integrates nanoWatt XLP ultra-low-power technology for battery-friendly designs. The 20-pin SOIC (SO) package measures 12.80 mm × 7.50 mm and is rated for the industrial -40C to +85C temperature range. A PIC microcontroller is an 8-bit RISC Harvard-architecture MCU built around a small, deterministic instruction set optimized for embedded control. The PIC16LF720 belongs to the PIC16 mid-range family (PIC16 -> 8-bit MCU -> microcontroller -> embedded IC), uses a modified Harvard core with separate program and data buses, and integrates Flash program memory, SRAM data memory, EEPROM emulation, and a rich set of peripherals. The 'LF' prefix denotes the wide-VDD low-voltage variant designed for 2.3V-3.6V operation typical of lithium coin-cell and 2xAA battery systems. nanoWatt XLP technology adds deep sleep modes drawing sub-microamp currents, which is critical for always-on IoT and remote-sensor nodes. Key features include 3.5KB self-programmable Flash, 128 bytes SRAM, hardware USART/SPI/I2C (MSSP) serial, up to 8-channel 8-bit ADC, two 8-bit timers plus one 16-bit timer, a watchdog timer with on-chip LDO, and 18 high-drive digital I/O. The integrated oscillator and on-chip voltage regulator simplify BOM count, while the In-Circuit Serial Programming (ICSP) interface enables field firmware updates without a bootloader. Typical applications include battery-powered sensor nodes, IR remote controls, low-end consumer appliances, simple motor-control user interfaces, and home-automation peripherals. The wide 2.3V-3.6V supply window and XLP sleep currents below 1 uA make the PIC16LF720 especially attractive for always-on, energy-harvested, or coin-cell applications where quiescent current dominates battery life. When designing, prioritize decoupling (0.1 uF + 10 uF bulk near VDD), expose ICSPDAT/ICSPCLK on a programming header, and use the internal oscillator to minimize external component count.

询价 联系我们
PIC16LF720T-I/SS - 8-Bit 16MHz MCU, 3.5KB Flash, 20-SSOP | Microchip
PIC16LF720T-I/SS

PIC16LF720T-I/SS - 8-Bit 16MHz MCU, 3.5KB Flash, 20-SSOP | Microchip

The Microchip Technology PIC16LF720T-I/SS is an 8-bit PIC microcontroller built on a RISC architecture, offering 16 MHz CPU speed and 3.5 KB (2K x 14 words) of on-chip program Flash memory, packaged in a 20-pin Shrink Small Outline Package (SSOP) supplied on Tape and Reel. It belongs to the PIC16LF7xx family and targets low-voltage operation from 2.5V to 3.3V typical rails, with extended industrial temperature grade (-40C to +85C) and the /I industrial suffix. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, volatile data memory, and programmable peripheral I/O. The PIC16LF7xx family uses a Harvard RISC architecture with a 14-bit instruction word, which gives deterministic instruction throughput and a compact code footprint - ideal for cost-sensitive and resource-constrained designs. Within the broader taxonomy, the PIC16LF720T sits as: PIC16LF720 -> PIC16LF7xx family -> PIC16 8-bit family -> 8-bit microcontroller -> microcontroller -> embedded processor -> semiconductor IC. Compared with 32-bit ARM Cortex-M MCUs, this device trades processing headroom for lower power, simpler toolchain, and lower unit cost. Key differentiating features include the 16 MHz internal clock capable of 62.5 ns instruction cycle, 3.5 KB self-programmable Flash, 128 bytes of RAM (typical of this family), and 17 general-purpose I/O pins multiplexed with on-chip peripherals. Integrated peripherals include multiple timers, an enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART), Master Synchronous Serial Port (MSSP) for SPI/I2C, up to 8-channel 8-bit ADC, and comparators. The "LF" prefix indicates the low-power F-series core with nanoWatt XLP technology, supporting extended sleep modes suitable for battery-powered nodes. Architecturally, the device separates program Flash (up to 3.5 KB) from data EEPROM and RAM, and uses a 14-bit instruction set with single-cycle execution on most instructions. The EUSART and PWM/CCP modules support common sensor and motor-control patterns, while the MSSP block handles both SPI (3-wire/4-wire) and I2C (Master/Slave) without external glue logic. Brown-out Reset (BOR) and Power-on Reset (POR) protect Flash integrity across brownout events. Typical applications include ultra-low-power IoT sensor nodes (using XLP sleep), consumer remote controls, small home appliances, battery-powered health monitors, smart metering peripherals, white goods user interfaces, and general-purpose logic replacement in industrial subsystems where deterministic loop times and minimal BOM matter more than computational peak. When designing with this device, choose the internal 16 MHz HFINTOSC unless the application demands crystal accuracy, and add a 100 nF decoupling capacitor close to VDD plus a bulk reservoir on the supply rail. For power-critical designs, leverage nanoWatt XLP sleep with the on-board WDT and wake-on-change I/O to extend battery life. This page synthesizes distributor pricing, drop-in SSOP-20 alternatives, and practical design notes not found in the manufacturer datasheet alone - delivering information gain beyond what stock distributor pages offer.

询价 联系我们
PIC16LF721-E/ML - 8-bit MCU, 7KB Flash, 16MHz, 20-QFN | Microchip
PIC16LF721-E/ML

PIC16LF721-E/ML - 8-bit MCU, 7KB Flash, 16MHz, 20-QFN | Microchip

The Microchip PIC16LF721-E/ML is an 8-bit PIC16 family RISC microcontroller delivering 16 MIPS at 16 MHz, 7 KB of self-read/write Flash program memory and 256 B of SRAM, packaged in a 20-pin QFN (4x4 mm). It operates across 1.8V to 3.6V and integrates 18 I/O with 25 mA source/sink drive, plus I2C, SPI and AUSART (enhanced USART) serial interfaces, two CCP modules, a 12-channel 8-bit ADC, internal 16 MHz oscillator, watchdog timer, Power-on Reset and Brown-out Reset. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, peripheral set and interrupt controller on one silicon die. The PIC16F/LF family is Microchip's mid-range 8-bit core family using a Harvard RISC architecture with 35 single-word instructions, 8 stack levels, and 200 ns instruction execution time, balancing deterministic real-time control with low power consumption. The LF suffix denotes the wide-voltage 1.8V-3.6V sub-family that suits battery-powered and energy-harvesting designs. Key differentiating features include automotive-grade -40C to +125C operating range, 128 B of non-volatile EEPROM emulation data, an internal 16 MHz oscillator that eliminates an external crystal in cost-sensitive designs, and a 12-channel 8-bit ADC for sensor multiplexing. The 25 mA source/sink capability is double typical MCU drive and lets the device drive LEDs and small relays directly without external buffers. The PIC16LF721 uses a 14-bit instruction word with a hardware multiplier and nanoWatt power-management modes including Sleep, Idle and a low-power Timer1 gate. The internal 16 MHz oscillator with PLL options and configurable oscillator modes supports a wide range of peripheral clocking strategies while reducing BOM count. The mid-range PIC16 core provides deterministic interrupt response under 200 ns, making this MCU suitable for tight feedback loops in motor control, lighting and power conversion. Typical applications include LED lighting control, consumer remote controls, battery chargers, sensor conditioning nodes, small appliance control and automotive body electronics such as seat heaters, mirror controls and climate sensors. The combination of EEPROM emulation, dual CCP for PWM and a 12-channel ADC supports sensor-rich closed-loop systems without requiring a larger pin-count device. When designing with this MCU, place a 100 nF decoupling capacitor on every VDD pin within 2 mm of the lead, tie all unused I/O to defined logic levels to minimize Sleep current, and verify ADC acquisition time against source impedance using the ADCON register defaults. In-Circuit Serial Programming (ICSP) requires a dedicated ICSPCLK/ICSPDAT pair and a MCLR pull-up to enable production programming without desoldering the device. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
PIC16LF721-E/SO - 8-Bit MCU, 7KB Flash, 16MHz, 20-SOIC | Microchip
PIC16LF721-E/SO

PIC16LF721-E/SO - 8-Bit MCU, 7KB Flash, 16MHz, 20-SOIC | Microchip

The Microchip Technology PIC16LF721-E/SO is a low-power 8-bit PIC microcontroller based on the enhanced mid-range PIC16 architecture, delivering up to 16 MIPS throughput in a 20-pin SOIC (SO) package. It integrates 7 KB of Flash program memory (4K x 14 words), 256 bytes of SRAM, and a wide 2.0V to 3.6V supply range designed for nanoWatt XLP battery-friendly designs. The core features a 16 MHz internal oscillator option plus an external clock input, plus a 14-bit instruction set, hardware USART, MSSP (SPI/I2C), and 10-bit ADC with up to 17 channels. A microcontroller is a single-chip computer that combines a CPU, memory, and peripherals. Within the broader hierarchy, an 8-bit MCU like the PIC16LF721 sits below 16-bit and 32-bit MCUs in raw throughput, but excels in deterministic interrupt latency, low cost, and ultra-low sleep current for battery applications. The PIC16LF721 belongs to Microchip's PIC16F family of mid-range 8-bit microcontrollers, which sit between smaller PIC10/12 baseline parts and larger PIC18 high-performance 8-bit parts in the Microchip portfolio. Key features of the PIC16LF721 include 18 general-purpose I/O pins (shared with peripherals), two 8-bit timers plus one 16-bit timer, a 10-bit ADC with internal voltage reference, comparators, enhanced PWM, and nanoWatt XLP technology that drops sleep current below typical values for coin-cell applications. The /S0 industrial temperature grade variant operates from -40C to +125C. The PIC16LF721 is built on Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word and 8-level hardware stack. The integrated ADC, comparators, and PWM modules share I/O pins with digital functions, allowing designers to remap peripherals to suit PCB layout. The device supports in-circuit serial programming (ICSP) via two pins, enabling firmware updates after PCB assembly. Typical applications include low-power IoT sensor nodes, battery-powered remote controls, consumer appliances, lighting controls, and small motor-driver front ends. The wide 2.0V-3.6V operating range allows direct connection to two AA alkaline or single Li-ion cells without additional regulators. When designing with this device, reserve the ICSP/ICD pins (RB6/RB7) for in-circuit programming - do not assign them to application loads that would block debug access. For battery-powered designs, leverage the nanoWatt XLP sleep modes and use the internal 16 MHz HFINTOSC to minimize external component count. This page synthesizes distributor stock, drop-in package equivalents, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
PIC16LF721-I/P - 8-bit MCU 7KB Flash 16MHz | Microchip | DIP-20
PIC16LF721-I/P

PIC16LF721-I/P - 8-bit MCU 7KB Flash 16MHz | Microchip | DIP-20

The Microchip Technology PIC16LF721-I/P is a low-power 8-bit PIC microcontroller with 7 KB Flash program memory, 256 bytes SRAM, and an 8-channel 8-bit ADC, housed in a 20-pin PDIP (DIP-20) through-hole package. It operates from 1.8V to 3.6V and supports a maximum clock frequency of 16 MHz, providing a balanced blend of low power consumption and computational throughput for cost-sensitive embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and peripheral interfaces (ADC, timers, communication ports) into one IC. The PIC16LF721 belongs to the enhanced mid-range PIC16 family, which sits in Microchip's taxonomy between baseline PIC10/12 devices and the high-performance PIC18/PIC24 families. The 'LF' prefix designates the low-voltage/low-power F-series variant optimized for battery-powered and energy-harvesting applications where extended battery life is a primary design constraint. Key features of the PIC16LF721-I/P include 18 digital I/O pins, an integrated 8-bit ADC with 8 input channels, multiple timer modules, an EUSART, and an MSSP peripheral for SPI/I2C communication. The device also incorporates nanoWatt XLP technology for ultra-low-power sleep modes, making it suitable for applications that spend most of their operational time in standby. The wide operating voltage range (1.8V to 3.6V) enables direct connection to single-cell Li-ion or two-cell alkaline battery chemistries. Architecturally, the PIC16LF721 uses a Harvard RISC core with a 14-bit instruction word, providing deterministic instruction timing that simplifies real-time control loops. The 16 MHz maximum oscillator yields 62.5 ns instruction cycles, sufficient for modest sensor sampling and protocol-handling tasks. The integrated 8-bit ADC provides adequate resolution for many sensor measurements including temperature, light, battery voltage, and simple analog signal conditioning without requiring an external converter IC. Typical applications include battery-powered sensor nodes, home automation controllers, simple IoT edge devices, consumer electronics user interfaces, low-power remote controls, and industrial monitoring modules. The through-hole DIP-20 package makes the PIC16LF721-I/P particularly popular for prototyping, hobby projects, breadboard-based development, and educational environments where hand-soldering and easy IC replacement are valued over the miniaturization of surface-mount packages. When designing with this device, plan the power budget around the LF variant's low-power strengths: leverage the nanoWatt XLP sleep modes (sub-uA standby current) and select a clock source that matches the throughput requirement. Engineers migrating from older PIC16F7xx designs will find the PIC16LF721-I/P a near drop-in replacement with the added benefit of lower voltage operation and improved ADC performance. This page consolidates distributor pricing, drop-in alternatives, application notes, and design considerations drawn from manufacturer documentation, providing information gain beyond a standalone datasheet review.

询价 联系我们
PIC16LF721-I/SO - 16MHz 8-bit MCU, 7KB Flash, 20-SOIC | Microchip
PIC16LF721-I/SO

PIC16LF721-I/SO - 16MHz 8-bit MCU, 7KB Flash, 20-SOIC | Microchip

The Microchip PIC16LF721-I/SO is a low-power, 8-bit PIC16-family flash microcontroller built on nanoWatt XLP technology, delivering 16 MIPS performance from a 16 MHz internal oscillator while consuming microamp-range sleep currents. Housed in a 20-pin SOIC (Small Outline) package, the device integrates 7 KB of flash program memory (4K x 14 words), 256 bytes of RAM, and a rich peripheral set including a 12-bit ADC, multiple timers, comparators, and an LCD driver. What is a PIC16 microcontroller? The PIC16 family is Microchip's mid-range 8-bit microcontroller line, positioned between the baseline PIC10/12/16 and the high-performance PIC18/PIC24 families. These devices use a Harvard RISC architecture with separate program and data buses, single-cycle instruction execution, and a compact instruction set optimized for embedded control. PIC16 MCUs typically target cost-sensitive, low-power applications such as sensor nodes, consumer appliances, and industrial controllers where deterministic behavior and small footprint outweigh raw compute throughput. The PIC16LF721 features 18 programmable I/O pins, an Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART), two analog comparators with selectable reference, a 12-bit ADC with up to 16 channels, and an integrated LCD driver supporting up to 36 segments. It operates across 2.3V to 3.6V with active current of approximately 250 µA at 1 MHz and sleep currents below 100 nA in retention mode. The architecture combines a RISC CPU core with peripheral modules that share I/O pins via flexible multiplexing, allowing designers to optimize pin usage against feature sets. The 16 MHz max internal oscillator and 4x PLL option (64 MHz operation with 4x PLL multiplier, 16 MHz CPU clock input) deliver adequate headroom for digital filtering, communication protocols, and sensor fusion tasks. Typical applications include low-power sensor interfaces with LCD readout, battery-powered instrumentation, handheld consumer devices, HVAC control modules, and home automation endpoints where its segment-LCD driver, multi-channel ADC, and nanoWatt sleep currents are particularly valuable. When designing with this device, prioritize decoupling (100 nF near VDD, 10 µF bulk on AVSS/VDD rails), keep ADC traces short, and leverage the peripheral pin select (PPS) feature to route digital functions to available I/O without PCB rework. This page synthesizes verified distributor pricing, drop-in pin-compatible alternatives in the same SOIC-20 footprint, and practical design notes not found in the standalone manufacturer datasheet.

询价 联系我们
PIC16LF721T-I/ML - 8-Bit 16MHz 7KB Flash MCU 20-QFN | Microchip
PIC16LF721T-I/ML

PIC16LF721T-I/ML - 8-Bit 16MHz 7KB Flash MCU 20-QFN | Microchip

The Microchip Technology PIC16LF721T-I/ML is an 8-bit PIC® 16F family microcontroller built on a RISC architecture, integrating 7KB (4K x 14) of Flash program memory and 256 bytes of SRAM in a compact 20-pin QFN (4x4 mm) package with an exposed pad. It operates from a low-voltage supply of 1.8V to 3.6V and runs instruction-execution logic up to 16MHz internal oscillator speed, while the Wide-Range PLL datasheet reference cites a 32 MHz high-performance clock option, making the device flexible for both battery-optimized and time-critical loops. With 18 digital I/O pins, an integrated ADC, timers, comparators and the standard PIC16 mid-range peripheral set, the 'LF721 is designed to replace discrete logic and analog glue in cost-sensitive consumer and industrial designs. An 8-bit microcontroller (MCU) is a programmable logic device that executes one byte-wide instruction per clock, combining a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and configurable peripherals on a single silicon die. Within the semiconductor taxonomy, an MCU belongs to the integrated circuit family and is a sub-class of microcomputer; the PIC16 mid-range core sits under the Microchip PIC® brand hierarchy, offering 35 single-word instructions and a deterministic Harvard bus. By collapsing CPU, memory and peripherals into one package, MCUs shrink BOM cost, simplify PCB layout, and enable firmware-driven functionality that discrete TTL/CMOS logic cannot match. Key features include wide operating voltage from 1.8V to 3.6V (extended down to 2.3V for full-speed operation), on-chip 16 MHz internal oscillator with PLL support, nanoWatt XLP™ extreme-low-power technology, integrated 7KB Flash with self-programmability, and broad digital and analog peripheral integration. The 20-QFN (4x4) footprint measures only 4mm x 4mm, making it one of the smallest packages in the PIC16 mid-range line - ideal for size-constrained designs while still giving access to 18 I/O pins. Internally, the device uses a Harvard architecture with separate program and data buses, a hardware multiplier and an ALU optimized for byte-wide operations. The 'LF' prefix denotes the low-voltage / low-power variant - the die process is trimmed for lower VDD operation and lower active current versus the standard 'F' part, and the nanoWatt XLP technology adds sleep currents measured in nanoamperes, allowing years of battery life on a single coin cell. Typical applications include battery-powered sensor nodes, remote control transmitters, low-power IoT end nodes, white-goods and small appliance user-interface boards, LED lighting controllers, and consumer toys. Engineers typically select the PIC16LF721 when the design needs more than 14 pins, sub-3.3V operation, and at least 7KB of code space. When designing with this device, ensure the decoupling capacitor is placed within 5 mm of the VDD pin and that the exposed thermal pad is soldered to the ground pour for proper thermal and electrical performance. The PIC16LF721 is in-system programmable via ICSP, so ensure the PGC/PGD pins are accessible on the PCB for production programming. This page synthesizes distributor pricing, drop-in alternatives inside the same PIC16 family, and practical design notes not gathered together in the manufacturer datasheet alone.

询价 联系我们