集成电路

子分类

📁 ADC/DAC 2520 产品 📁 放大器IC 800 产品 📁 音频编解码器 16 产品 📁 音频IC 2 产品 📁 时钟与计时 314 产品 📁 DSP 963 产品 📁 数据采集IC 2 产品 📁 数字电位器 4 产品 📁 显示驱动与控制器 1 产品 📁 FPGA与CPLD 6666 产品 📁 接口IC 1603 产品 📁 LED驱动器 1 产品 📁 逻辑IC 305 产品 📁 存储IC 875 产品 📁 微控制器 18756 产品 📁 微处理器 4 产品 📁 电机驱动器 1 产品 📁 其他 1 产品 📁 Sensor and Detector Interfaces 1 产品 📁 专用IC 15 产品 📁 视频IC 13 产品

产品（32865)

PIC18LF43K22-I/P - 8-bit 64MHz 8KB Flash MCU 40-PDIP | Microchip
PIC18LF43K22-I/P

PIC18LF43K22-I/P - 8-bit 64MHz 8KB Flash MCU 40-PDIP | Microchip

The Microchip PIC18LF43K22-I/P is an 8-bit PIC microcontroller with 8 KB Flash program memory, 64 MHz maximum CPU speed, and an integrated XLP (eXtreme Low Power) technology core, housed in a 40-pin PDIP (0.600", 15.24 mm) through-hole package. It is the low-voltage (LF) variant of the PIC18F43K22 family, optimized for operation down to 1.8 V supply while retaining the rich peripheral set of the K22 series. The part is rated for the industrial temperature grade (-40C to +85C). A PIC microcontroller is a Harvard-architecture RISC processor with separate program and data buses, manufactured by Microchip Technology. PIC18 devices sit in the upper tier of the 8-bit PIC family, providing hardware multiply, linear addressing, and C-compiler-friendly instruction set over the baseline PIC16 line. Within the broader taxonomy, PIC18LF43K22 belongs to: PIC microcontroller -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. The 'LF' prefix denotes the wide-voltage (1.8V-3.6V) variant; the 'F' (non-LF) variants run 2.3V-5.5V. Key features of the PIC18LF43K22-I/P include 8 KB Flash with self-programmability, 336 bytes of EEPROM, up to 1.5 KB RAM, a 12-bit A/D converter with up to 28 channels, two analog comparators, mTouch capacitive sensing hardware, a master I2C/SPI, two enhanced USARTs, and four 8/16-bit timer/counters. The XLP technology delivers nanoWatt sleep currents suitable for battery-powered IoT nodes. Architecturally, the device uses a 16-bit instruction word with an 8-bit data path, achieving up to 16 MIPS throughput at 64 MHz. The 12-bit ADC runs up to 100 ksps with acquisition-to-conversion done in hardware, while the mTouch peripheral eliminates external RC components for capacitive touch buttons. Typical applications include low-power IoT sensor nodes, capacitive touch human-machine interfaces, battery-powered instrumentation, USB-to-UART bridges using the EUSART, and industrial control panels with mixed analog/digital I/O. Its 28 ADC channels and 36 I/O pins make it a strong fit for multi-channel data acquisition. When designing with this MCU, ensure decoupling is placed within 5 mm of VDD with a 100 nF ceramic per rail. In-circuit debugging is supported via ICSP on dedicated PGD/PGC pins; reserve these as no-connect on the PCB if unused. The LF voltage range allows direct Li-Ion battery operation without an LDO. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone Microchip datasheet.

询价 联系我们
PIC18LF43K22-I/PT - 8KB Flash, 8-bit XLP MCU 44-TQFP | Microchip
PIC18LF43K22-I/PT

PIC18LF43K22-I/PT - 8KB Flash, 8-bit XLP MCU 44-TQFP | Microchip

The Microchip Technology PIC18LF43K22-I/PT is an 8-bit PIC® XLP™ microcontroller featuring 8KB of Flash program memory (4K x 16), 336 bytes of EEPROM, and 64MHz internal oscillator performance, housed in a 44-pin TQFP (10x10 mm) package. It operates from a 1.8V to 3.6V supply, delivering up to 16 MIPS at 64MHz core clock and consuming as little as 9 nA in sleep mode, making it a flagship part of the PIC18F/LF4XK22 family. An 8-bit microcontroller (MCU) is a small, low-power computer-on-a-chip that integrates a CPU core, Flash program memory, SRAM data memory, peripherals, and I/O into a single silicon die. The PIC18 family uses Microchip's enhanced Harvard RISC architecture with 16-bit instructions optimized for C and assembly code density. MCUs sit within the broader taxonomy of microcontrollers -> embedded processors -> semiconductors, serving as the central controller for countless embedded products. Key features include 8KB self-programmable Flash, 512 bytes SRAM, 256 bytes EEPROM, nanoWatt XLP ultra-low-power technology, an integrated 12-channel 10-bit ADC, multiple timers, enhanced USART, SPI, and I2C peripherals, and a wide operating voltage range suited for battery-powered products. The 44-TQFP package exposes 34 digital I/O pins plus dedicated oscillator, programming/debug, and power pins. Technically, the LF version drops the F variant's 2.0V-5.5V window in favor of a tighter 1.8V-3.6V window optimized for low-voltage, low-power XLP applications. The part includes a 64MHz internal oscillator block (selectable via OSCCON), a charge-time measurement unit (CTMU) for capacitive touch sensing, and hardware PWM/ECCP modules. Code protection, ICD in-circuit debugging, and ICSP programming are standard, supported by MPLAB X IDE and the XC8 compiler toolchain. Typical applications include low-power IoT sensor nodes, battery-powered handheld instruments, capacitive touch keypads, motor control for small DC and BLDC motors, USB-to-UART bridges, LED lighting controllers, and consumer appliance interfaces. The wide peripheral set also suits industrial sensor conditioning, smart thermostats, and medical telemetry front-ends. When designing with the PIC18LF43K22-I/PT, ensure your supply stays within 1.8V to 3.6V and budget for decoupling on AVDD/AVSS pairs used by the ADC. Decoupling the LF from the F variant: do not sub an LF device on a board designed for a 5V F variant without regulator changes, and consider migrating to PIC18F43K22-I/PT only if 5V rails are present. This page synthesizes distributor pricing, pin-to-pin same-package alternatives, and practical design notes drawn from the official datasheet family PDF - content that you will not find on any single distributor or manufacturer page.

询价 联系我们
PIC18LF43K22T-I/ML - 8-bit XLP MCU, 64MHz, 8KB Flash | Microchip
PIC18LF43K22T-I/ML

PIC18LF43K22T-I/ML - 8-bit XLP MCU, 64MHz, 8KB Flash | Microchip

The Microchip Technology PIC18LF43K22T-I/ML is a low-power, high-performance 8-bit PIC18 microcontroller with nanoWatt XLP technology, 8KB Flash program memory, 64MHz CPU speed, and 34 I/O pins, housed in a 44-pin QFN (8x8 mm) package with exposed pad. The LF prefix denotes the F-variant (Flash-based) optimized for 2.5V/3.3V operation across an industrial temperature range of -40C to +85C. Tape and reel packaging (T suffix) targets high-volume SMT assembly. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, RAM, peripherals, and I/O. The PIC18 family uses an enhanced 8-bit RISC Harvard architecture with a modified instruction set optimized for C code generation. Low-power XLP nanoWatt variants integrate sleep modes drawing sub-microamp currents, making them suitable for battery-powered and energy-harvesting products where the MCU must wake, sample, transmit, and return to deep sleep. Key features include 8KB (4K x 16) Flash program memory, 3968 bytes RAM, 256 bytes EEPROM, a 10-bit ADC up to 30 channels, two Enhanced USART modules, two MSSP (SPI/I2C) ports, two Enhanced CCP modules, and an enhanced PWM module. The device supports up to 64MHz operation (16 MIPS) from an internal 16MHz oscillator or external crystal, with on-chip 32kHz low-power oscillator for RTCC operation during sleep. The PIC18LF43K22T-I/ML uses a 16-bit modified Harvard instruction set with separate program and data buses, a hardware multiplier, and a 31-level hardware stack. XLP technology adds multiple idle and sleep modes (Idle, Sleep, Deep Sleep, Low-Power Sleep) with peripheral clock gating, enabling standby currents below 100 nA typical. The 44-QFN package exposes a thermal pad for improved heat spreading at high CPU loads. Typical applications include battery-powered IoT sensor nodes, portable medical monitoring devices, industrial sensor interfaces, USB peripherals (when paired with the PIC18LF25/26K50 family), and remote controls. The XLP feature set is specifically designed for products that spend most of their time in deep sleep and need reliable wake-on-interrupt behavior over years of battery life. When designing with this device, allocate adequate Flash for bootloader and application images (8KB is modest for modern connected applications), use the 32kHz low-power oscillator for RTCC and watchdog during sleep, and follow Microchip AN1066 (Microchip Tips and Tricks for the PIC18F) for optimal XLP current budgeting. Decoupling the exposed pad to ground with multiple vias improves thermal and electrical performance. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical XLP design notes not found in the manufacturer datasheet alone, helping engineers select and qualify a pin-compatible PIC18LF MCU for low-power embedded applications.

询价 联系我们
PIC18LF43K22T-I/MV - 8-bit 64MHz 8KB Flash XLP MCU | Microchip
PIC18LF43K22T-I/MV

PIC18LF43K22T-I/MV - 8-bit 64MHz 8KB Flash XLP MCU | Microchip

The Microchip PIC18LF43K22T-I/MV is an 8-bit PIC18 microcontroller in the nanoWatt XLP family, delivering 64 MHz CPU performance with 8 KB of Flash program memory and 512 bytes of RAM. The LF prefix indicates the low-voltage F-variant core, supporting a 1.8V-3.6V VDD operating range, while the 'F' (without L) variant supports 2.3V-5.5V. The part ships in a 40-pin UQFN (5x5 mm, MV package code) with an exposed pad. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, Flash program memory, peripherals (timers, ADC, communication, GPIO), and interrupt logic onto one silicon die. Within the broader taxonomy, a PIC18F device is a Harvard-architecture RISC MCU -> a microcontroller -> an embedded processor -> a semiconductor IC. The PIC18LF43K22T-I/MV specifically targets ultra-low-power applications, leveraging Microchip's nanoWatt XLP technology to achieve sleep currents in the nanoamp range, suitable for battery-powered IoT endpoints, sensor nodes, and wearable devices. Key features of this part include: 64 MHz maximum clock (16 MIPS at 4x PLL), 8 KB Flash (4K x 16), 512 bytes RAM, 256 bytes EEPROM, 35 I/O pins, a 10-bit ADC with up to 30 channels, multiple Enhanced USART, MSSP (SPI/I2C) modules, and capture/compare/PWM (ECCP) peripherals. The LF variant's 1.8V-3.6V range and nanoWatt XLP technology make it ideal for energy harvesting and battery-powered designs that must operate for years on a single cell. Architecturally, the PIC18LF43K22T-I/MV uses an enhanced RISC core with 16-bit opcodes, 8-bit data path, hardware multiply, and a hardware stack with 31 levels, providing predictable interrupt latency. Internal oscillator blocks and flexible clock switching support low-power modes (Sleep, Idle, Doze) with programmable wake sources. Typical applications include portable medical devices, IoT sensor hubs, automotive body electronics (non-safety), remote controls, low-power wireless sensor nodes, battery chargers, smart meters, and human-machine interface (HMI) controllers. The wide peripheral set also supports small TFT displays and capacitive-touch user interfaces. When designing with this MCU, plan for adequate decoupling (100 nF + 10 µF bulk) on VDD/AVDD/VBAT pins, and follow Microchip's PCB layout guidelines for QFN exposed-pad thermal dissipation. The 5x5 UQFN (MV) footprint has 40 pins at 0.4 mm pitch; signal integrity at 64 MHz requires careful trace routing and ground-return stitching. This page synthesizes distributor pricing, pin-to-pin compatible drop-in alternatives from the same PIC18LF43K22 family, and practical design notes that complement (not duplicate) the manufacturer datasheet.

询价 联系我们
PIC18LF43K22T-I/PT - 8KB Flash 8-bit MCU 64MHz XLP 44-TQFP
PIC18LF43K22T-I/PT

PIC18LF43K22T-I/PT - 8KB Flash 8-bit MCU 64MHz XLP 44-TQFP

The Microchip Technology PIC18LF43K22T-I/PT is an 8-bit PIC18 microcontroller built on the nanoWatt XLP (eXtreme Low Power) platform, delivering 64 MHz of CPU performance with 8 KB (4K x 16) of Flash program memory in a 44-pin TQFP (10x10 mm) package. The LF prefix indicates the low-voltage F-core variant, optimized for operation from 1.8 V to 3.6 V (typical 2.5 V / 3.3 V rails), while retaining the full 16 MIPS instruction throughput of the PIC18 family. An 8-bit microcontroller (MCU) is a small, single-chip computer that integrates a CPU, non-volatile program memory, RAM, peripherals, and I/O into one package, designed for embedded control tasks. Within the semiconductor taxonomy, MCUs sit under microcontrollers -> embedded processors -> digital ICs. PIC18 devices use a modified Harvard RISC architecture with 16-bit opcodes and 8-bit data, allowing single-cycle instruction execution and deterministic interrupt response ideal for real-time control. Key features include 3968 bytes of SRAM, 256 bytes of EEPROM data memory, two Enhanced USART modules, two MSSP (SPI/I2C) peripherals, a 12-bit A/D converter with up to 30 channels, and multiple 16-bit timers. The nanoWatt XLP technology delivers typical sleep currents below 100 nA with RTC and watchdog operating, making this device suitable for battery-powered applications. The 44-TQFP package is the standard surface-mount option for the PIC18F43K22 family and offers generous I/O expansion versus the 28- and 40-pin siblings. The architecture uses a 16-bit instruction word with 8-bit data path and 31-level hardware stack, with a priority-level interrupt controller supporting both edge and level-sensitive external interrupts. CIP (Core Independent Peripherals) features include the 16-bit PWM, configurable logic cells, and zero-cross detection, allowing event-driven tasks to run without CPU intervention for power savings. Typical applications include industrial sensor nodes, low-power IoT endpoints, portable consumer products, energy-harvesting devices, and battery-backed instrumentation. The wide peripheral set also makes it useful in human-machine interface (HMI) panels and small motor-control boards where deterministic timing is required. When designing with the PIC18LF43K22, observe the LF voltage range: 1.8 V minimum for program execution but 2.0 V minimum for full Flash programming, and 3.6 V absolute maximum. Place decoupling capacitors (100 nF plus 1 uF) within 5 mm of VDD/AVDD/VSS pins, and route the MCLR line with a 10 kΩ pull-up if not driven by the debugger. This page synthesizes distributor pricing, verified drop-in alternatives from the same PIC18LF43K22 family, and practical design notes not found on the manufacturer product page.

询价 联系我们
PIC18LF4410-I/PT - 8-Bit 40MHz 16KB Flash MCU | Microchip
PIC18LF4410-I/PT

PIC18LF4410-I/PT - 8-Bit 40MHz 16KB Flash MCU | Microchip

The Microchip Technology PIC18LF4410-I/PT is an 8-bit PIC18F family microcontroller (MCU) integrating 16KB of Flash program memory, 768 bytes of SRAM, 256 bytes of EEPROM, and a 10-bit ADC, housed in a 44-pin TQFP (10x10 mm) package with industrial -40C to +85C temperature rating. What is a PIC18F microcontroller? An 8-bit PIC microcontroller is a Harvard-architecture RISC processor from Microchip Technology that executes one instruction per clock cycle (except branches). It belongs to the broader category of microcontroller -> embedded controller -> semiconductor device, and is widely used in motor control, sensor interfacing, and low-power embedded applications thanks to nanoWatt Technology power-management features. Key features include a 40 MHz maximum CPU clock (10 MIPS performance), 36 digital I/O pins, a 13-channel 10-bit Analog-to-Digital Converter (ADC), two Enhanced Capture/Compare/PWM (ECCP) modules, two comparators, an Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter (EUSART), a Master Synchronous Serial Port (MSSP) supporting SPI and I2C, and a 4x Phase-Locked Loop (PLL) multiplier. The LF-prefixed low-voltage core operates from 2.0V to 5.5V. Architecturally, the PIC18LF4410 uses a 16-bit instruction word with 8-bit data path and 31-level hardware stack, providing deterministic interrupt response. The 10-bit ADC delivers up to 100K samples per second with 13 input channels multiplexed across the package pins. nanoWatt Technology supports multiple idle and sleep modes (Idle, Sleep, Deep Sleep) with sub-microamp standby current. Typical applications include industrial sensor interface modules, building automation controllers, HVAC damper and valve controls, low-power remote sensor nodes, white-goods user-interface boards, and small consumer appliance main controllers where the 36 I/O count and 16KB Flash are sufficient. When designing with this MCU, ensure the configuration bits (CONFIG1H through CONFIG5H) are set correctly for oscillator selection (HS, XT, RC, internal oscillator with PLL), watchdog timer state, and low-voltage programming. For power-sensitive designs, leverage nanoWatt Sleep modes with peripheral disable bits; current draw in Sleep with WDT disabled drops below 100 nA. This page synthesizes distributor pricing, package-compatible PIC18F drop-in alternatives, and practical design notes that complement, but do not replace, the manufacturer datasheet.

询价 联系我们
PIC18LF4410T-I/ML - 8-bit PIC MCU, 16KB Flash, 40MHz, 44-QFN | Microchip
PIC18LF4410T-I/ML

PIC18LF4410T-I/ML - 8-bit PIC MCU, 16KB Flash, 40MHz, 44-QFN | Microchip

The Microchip Technology PIC18LF4410T-I/ML is an 8-bit PIC microcontroller with 16KB (8K x 16) of Flash program memory, 768 bytes of RAM, and a 40 MHz core clock, housed in a 44-pin QFN (8x8 mm) package with an exposed thermal pad (ML suffix). It integrates a 13-channel 10-bit ADC, channels USART/UART, I2C, SPI, and 36 digital I/O lines operating from a 2.0 V to 5.5 V supply range, supporting the LF low-voltage family. An 8-bit PIC microcontroller is a Harvard-architecture RISC processor widely used in embedded control. PIC microcontrollers (MCU -> microcontroller -> embedded controller -> semiconductor) integrate CPU, Flash, RAM, peripherals, and interrupt logic on a single die, enabling compact BOMs in motor control, sensor interfaces, and consumer appliances. The 'LF' in the part number designates the extended low-voltage family, which retains full speed down to 2.0 V versus the standard F family that runs at 4.2 V minimum. Key features include 16 KB Flash (8K x 16 instructions), 768 bytes RAM, 256 bytes EEPROM, a 13-channel 10-bit ADC, two analog comparators, two CCP/ECCP modules, a 16-bit timer/counter, and three 8-bit timers. NanoWatt power management provides Idle and Sleep modes with on-the-fly oscillator switching. The device also includes a programmable brown-out reset, a watchdog timer with its own on-chip RC oscillator, and an ICD/ICSP in-circuit debug interface accessible through dedicated RB6/RB7 pins. The 44-QFN (ML) package offers a compact 8x8 mm footprint with an exposed thermal pad that reduces junction-to-board thermal resistance and improves high-current GPIO performance. Microchip's PIC18 instruction set provides single-cycle execution for most instructions and a linear code space with hardware multiply, easing migration from smaller PIC16 designs. The 'T' suffix in the MPN denotes tape-and-reel packaging for high-volume assembly, while 'I/ML' indicates the industrial temperature range (-40 °C to +85 °C) and the QFN package code. Typical applications include industrial sensor nodes, low-power IoT edge devices, consumer white goods, HVAC fan and blower control, lighting ballasts, and human-machine interface (HMI) panels. The combination of analog-rich peripherals (10-bit ADC, comparators) and low-voltage operation makes the PIC18LF4410 particularly suited to battery-powered or 3.3 V regulated systems that previously required the 5 V-only F variant. When designing with this MCU, place decoupling capacitors (100 nF + 10 uF) within 5 mm of each VDD/VSS pair and bond the exposed pad (EP) to a continuous ground plane to meet the QFN thermal and electrical requirements. The PIC18LF4410 is pin-compatible with the PIC18LF4610 (96 KB Flash) and PIC18LF4510 (32 KB Flash) for footprint-conservative memory upgrades. This page synthesizes distributor pricing, drop-in alternatives from the PIC18LF family, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
PIC18LF4410T-I/PT - 8-Bit 40MHz MCU 16KB Flash 44-TQFP | Microchip
PIC18LF4410T-I/PT

PIC18LF4410T-I/PT - 8-Bit 40MHz MCU 16KB Flash 44-TQFP | Microchip

The Microchip Technology PIC18LF4410T-I/PT is an 8-bit PIC18 microcontroller with a 40 MHz CPU core, 16 KB of FLASH program memory (8K x 16), 768 bytes of RAM, and a 13-channel 10-bit ADC, packaged in a 44-pin TQFP (10x10 mm). It is the tape-and-reel variant of the PIC18LF4410-I/PT and belongs to the PIC18 LF "low-power" family with NanoWatt Technology for active and sleep current management. An 8-bit microcontroller is a single-chip computer with an 8-bit data path, on-chip FLASH program memory, RAM, and integrated peripherals such as ADC, timers, and serial interfaces. MCUs sit in the embedded-system hierarchy alongside microprocessors, DSPs, and FPGAs, and are preferred when deterministic control of low-to-moderate complexity tasks is required at minimal cost and power. The PIC18 family in particular extends the legacy PIC16 architecture with 16-bit instructions, linear memory, C-friendly design, and enhanced peripherals while retaining the classic PIC toolchain. Key features include 16 KB FLASH and 768 B RAM, 36 digital I/O pins, a 10-bit ADC with up to 13 input channels, two CCP modules, and serial peripherals including I2C, SPI, and an enhanced addressable USART. NanoWatt Technology provides multiple idle and sleep modes that drop core current to the microampere range, which is the reason for the "LF" suffix in the part number. The 44-pin TQFP (PT) gives a generous pin budget for parallel buses or multiple analog inputs. Architecturally the PIC18LF4410 uses a Harvard RISC core with a 16-bit instruction word, an 8-level hardware stack, and priority-interrupt controller. The on-chip voltage regulator accepts a wide supply range of 2.0 V to 5.5 V, and the LF variant is optimized for full operation across that window including a true 3.3 V rail. Self-programming FLASH and an ICD-friendly debug interface are standard for the family. Typical applications include industrial control boards, white-goods and appliance panels, sensor conditioning nodes, automotive body and interior subsystems, low-end human-machine interface modules, and USB/serial bridging companion designs. The wide supply range also makes the part attractive for battery- or energy-harvesting designs. When designing, place 100 nF decoupling on every VDD pin, tie the MCLR pin through a 10 kohm pull-up to VDD, and respect the in-circuit debug pinout. Verify that the chosen 16 KB part is sufficient for both the application and any USB/HID bootloader you intend to use. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not assembled in the manufacturer datasheet, so you can shorten part selection and PCB reuse decisions.

询价 联系我们
PIC18LF442-I/L - 8-bit MCU 16KB Flash 40MHz 44-PLCC | Microchip
PIC18LF442-I/L

PIC18LF442-I/L - 8-bit MCU 16KB Flash 40MHz 44-PLCC | Microchip

The Microchip Technology PIC18LF442-I/L is an 8-bit RISC CMOS flash microcontroller in the PIC18F family, delivering 10 MIPS (100 ns instruction execution) performance from a 40 MHz clock. It integrates 16 KB of flash program memory (8K x 16), 768 bytes of RAM, 256 bytes of EEPROM, and 34 digital I/O lines in a 44-pin PLCC package measuring 16.59 x 16.59 mm. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (ROM/flash), data memory (RAM), and peripherals. The PIC18F architecture is an enhanced 8-bit family within the broader PIC microcontroller hierarchy, offering 77 single-word instructions with 16-bit instruction width. PIC18LF variants are the low-power "LF" family members optimized for 2.0-5.5 V operation, while PIC18F (without the "L") targets 4.2-5.5 V. The PIC18LF442 specifically targets industrial-temperature, low-voltage designs where the 2 V minimum rail extends battery and energy-harvesting lifetime. Key differentiating specifications include a 10-bit ADC with up to 8 channels, a USART, MSSP (SPI/I2C), capture/compare/PWM modules, dual analog comparators, and a 16-bit timer architecture. The 40 MHz oscillator drives 10 MIPS throughput, making it well-suited for control loops and serial-bus bridging. Brown-out Reset (BOR), Power-on Reset (POR), Watchdog Timer with its own on-chip RC oscillator, and In-Circuit Serial Programming (ICSP) provide robust embedded deployment. The PIC18F core uses a Harvard architecture with separate program and data buses, plus a 32-level hardware stack. The "LF" low-power process technology provides reduced active and sleep current versus the standard "F" siblings, which is the principal differentiator from PIC18F442 in 5 V designs. Code compatibility across PIC16C5X/PIC12CXXX/PIC16CXX/PIC17CXX preserves legacy code while enabling migration to higher performance. Typical applications include industrial automation controllers, sensor interface nodes, automotive body electronics (non-safety), HVAC control panels, smart metering, and consumer appliance control. The 44-PLCC footprint is convenient for socketed prototyping and field-replaceable modules, and the 5.5 V tolerance eases integration with legacy 5 V analog front ends. When designing with this part, place decoupling capacitors (100 nF plus bulk) within a few millimetres of every VDD/VSS pin pair, especially because the ADC reference shares VDD. Configure CONFIG words to match oscillator mode, BOR threshold, and watchdog state before code execution - locked-out debug or wrong clock mode is the most common bring-up failure on this family. This page consolidates distributor pricing, drop-in compatible alternatives, and practical design notes that go beyond the manufacturer datasheet to support faster design-in and sourcing decisions for the PIC18LF442-I/L.

询价 联系我们
PIC18LF442-I/P - 8-Bit 40MHz 16KB Flash MCU 40-PDIP | Microchip
PIC18LF442-I/P

PIC18LF442-I/P - 8-Bit 40MHz 16KB Flash MCU 40-PDIP | Microchip

The Microchip Technology PIC18LF442-I/P is a high-performance 8-bit CMOS Flash-based microcontroller built on the PIC18 architecture, delivering 10 MIPS at 40 MHz with 16 KB of program memory, 768 bytes of RAM, and 256 bytes of EEPROM in a 40-pin PDIP (DIP-40) through-hole package. The PIC18LF442-I/P integrates 34 digital I/O lines, a 10-bit Analog-to-Digital Converter with multiple input channels, capture/compare/PWM modules, and standard serial peripherals, addressing the needs of cost-sensitive industrial and consumer embedded designs. A PIC18 microcontroller is part of Microchip's enhanced 8-bit MCU family that uses a modified Harvard architecture with separate program and data buses plus a 16-bit instruction word. PIC18 microcontrollers are positioned in Microchip's portfolio between the legacy PIC16 baseline family and the PIC24/dsPIC 16-bit families, and are widely adopted in motor control, sensing, low-power IoT edge nodes, and human-machine interface applications due to their deterministic interrupt latency, mature MPLAB XC8 toolchain support, and broad ecosystem of libraries. Key features of the PIC18LF442-I/P include 40 MHz maximum clock speed (10 MIPS), 16 KB on-chip Flash program memory, 768 bytes SRAM, 256 bytes EEPROM, 34 I/O pins, three 16-bit timers, a 10-bit multi-channel ADC, USART, MSSP (SPI/I2C), and a 4x PLL. The 'LF' designator denotes the wide-voltage (2.0V-5.5V) variant suited to battery-powered systems; the 'I/P' suffix specifies the industrial temperature range (-40C to +85C) and PDIP-40 package. Internal RC oscillator, brown-out reset, and low-voltage detect simplify BOM cost. The device uses a RISC instruction set with 77 single-word instructions, a hardware multiplier, and a 16-bit wide instruction bus for fast execution. Its 8-bit data path and accumulator-based register model support direct C compilation via MPLAB XC8 while preserving PIC legacy assembly code portability. The integrated 10-bit ADC delivers up to 8 channels, supporting up to ~20 kSPS for sensor signal acquisition in industrial control loops. Typical applications include industrial automation controllers, HVAC sensor interface boards, low-cost consumer appliances, motor driver peripherals (small BLDC/PMSM), automotive body electronics (non-safety), and educational development boards. Designers choose this MCU when they need 8-bit simplicity, mature tooling, and a wide operating voltage range. When designing with the PIC18LF442-I/P, ensure the configured clock source (HS, XT, internal RC) matches Fosc vs. VDD per the datasheet electrical specifications. Always enable the watchdog timer for industrial deployments, and reserve at least one timer for FreeRTOS/PIC18 SysTick-equivalent scheduling if real-time control is required. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet alone, helping engineers shorten PIC18 BOM selection and qualification time.

询价 联系我们
PIC18LF442-I/PT - 8-Bit 40MHz 16KB Flash MCU | Microchip | TQFP-44
PIC18LF442-I/PT

PIC18LF442-I/PT - 8-Bit 40MHz 16KB Flash MCU | Microchip | TQFP-44

The Microchip Technology PIC18LF442-I/PT is an 8-bit PIC® RISC flash microcontroller running at 40 MHz (10 MIPS) with 16 KB of program Flash and 768 bytes of RAM, housed in a 44-pin TQFP (10x10 mm) package. It operates across a wide 2.0 V to 5.5 V supply range, with 34 digital I/O lines, a 10-bit multi-channel ADC, and integrated peripherals including I2C, SPI, and USART. What is a PIC18 microcontroller? The PIC18 family from Microchip is a high-performance 8-bit CMOS Flash MCU line using an enhanced RISC architecture with 77 single-word instructions and a hardware multiplier. PIC18 belongs to the broader category: microcontroller -> embedded MCU -> 8-bit MCU -> CMOS RISC processor -> semiconductor. These devices target applications requiring deterministic real-time control, low power, and easy reprogrammability in-circuit. Key features of the PIC18LF442 include: 16 KB (8K x 16) self-programmable Flash program memory, 768 bytes of RAM, 256 bytes of EEPROM, 34 I/O pins with individually programmable pull-ups, four timer modules, a 10-bit ADC with up to 8 input channels, two analog comparators, an enhanced USART with autobaud detection, an MSSP module supporting SPI and I2C (master/slave), and a 10 MHz internal oscillator option alongside external crystal support up to 40 MHz. The architecture provides 10 MIPS throughput, hardware stack, priority interrupts, and nanoWatt power management with multiple idle and sleep modes. The enhanced flash cell supports >100 k erase/write cycles and supports self-programming under firmware control, enabling bootloader and field-update scenarios. Typical applications include industrial sensor interfaces, motor control peripherals, HVAC controllers, automotive body electronics (non-AEC-Q100), consumer appliance control boards, and USB-to-UART bridges when paired with a separate USB transceiver. The wide 2.0-5.5 V supply supports both 3.3 V and 5 V system rails. When designing with this MCU, use a 0.1 uF decoupling capacitor per VDD pin placed within 5 mm, and ensure MCLR is tied through a 10 kohm pull-up to VDD for reliable reset. The ICD/ICSP programming pins (RB6/RB7) should not be heavily loaded during debug sessions to avoid programming failure. This page synthesizes distributor pricing, same-family pin-compatible drop-in alternatives, and practical design notes not found in the bare manufacturer datasheet.

询价 联系我们
PIC18LF4420-I/ML - 8-Bit MCU, 16KB Flash, 40MHz, 44-QFN | Microchip
PIC18LF4420-I/ML

PIC18LF4420-I/ML - 8-Bit MCU, 16KB Flash, 40MHz, 44-QFN | Microchip

The Microchip PIC18LF4420-I/ML is an 8-bit PIC18 enhanced flash microcontroller running at up to 40 MHz, with 16 KB of flash program memory and 768 bytes of RAM, housed in a 44-pin QFN (8x8 mm) package. The "LF" variant operates across 2.0 V to 5.5 V, making it ideal for low-voltage designs that must share rails with 3.3 V peripherals and 5 V analog blocks. The "I" temperature suffix indicates an industrial temperature range of -40 C to +85 C, while the "/ML" suffix designates the lead-free 8x8 mm QFN with exposed pad. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory (flash), volatile working memory (RAM), and a rich set of on-chip peripherals. Within the embedded hierarchy, an 8-bit MCU like the PIC18F sits below 32-bit Cortex-M parts in arithmetic performance but above discrete logic in functional integration. The PIC18LF4420 belongs to the PIC18F "high-performance 8-bit" family that adds a hardware multiplier, C-friendly architecture, and 16-bit instructions compared to baseline PIC16F parts. Key features of the PIC18LF4420 include a 10-bit ADC with up to 13 input channels, a 4x4 hardware multiplier for fast DSP-style math, two enhanced CCP modules and one USART, I2C, SPI, and a parallel slave port for external memory expansion. The device supports self-programming under firmware control, allowing bootloader-driven field updates and on-chip EEPROM emulation. An extended watchdog timer and brown-out reset help recover from code faults and brown-out events. Architecturally, the PIC18LF4420 uses a 16-bit instruction word with an 8-bit data path, a modified Harvard memory map, and a priority-level interrupt controller. The 40 MHz oscillator provides up to 10 MIPS, and the nanoWatt technology reduces sleep current to under 100 nA with the RTCC and watchdog running, which is critical for battery-powered sensors. Typical applications include industrial sensing and control, USB/HID bridges when paired with a serial interface, low-power sensor hubs, motor control loops, and white-goods user interfaces. The wide voltage range and generous peripheral set make it a popular choice for migration from older PIC16F and PIC18F designs. Drop-in compatibility with PIC18F4520 in the same 44-pin QFN lets engineers move between 5 V F-variant and LF-variant designs without PCB rework.

询价 联系我们
PIC18LF4420-I/PT - 8-bit 40MHz MCU 16KB Flash 44-TQFP | Microchip
PIC18LF4420-I/PT

PIC18LF4420-I/PT - 8-bit 40MHz MCU 16KB Flash 44-TQFP | Microchip

The Microchip Technology PIC18LF4420-I/PT is an 8-bit RISC microcontroller from the PIC18 family, featuring 16KB (8K x 16) of FLASH program memory, 768 bytes of RAM, and 256 bytes of EEPROM, housed in a 44-pin TQFP (10x10 mm) package. It operates at a maximum clock frequency of 40MHz (10 MIPS) from a 2.0V to 5.5V supply voltage range, with the "LF" low-voltage silicon offering extended low-power operation down to 2V at 4MHz. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O into one package. The PIC18 family is Microchip's enhanced 8-bit architecture that sits between the baseline PIC16 family and the 16-bit dsPIC family. Within this hierarchy, the PIC18LF4420 belongs to the PIC18F4420 sub-family, which targets general-purpose embedded control with on-chip 10-bit ADC, multiple timers, and communication peripherals. Key features include 36 digital I/O pins, a 10-bit ADC with up to 13 input channels, two capture/compare/PWM modules, two USART modules, an SPI/I2C master/slave MSSP peripheral, and a 13-channel ADC. The device supports in-circuit serial programming (ICSP) and in-circuit debugging via two program/debug pins, enabling direct flash programming on the assembled PCB without removing the device. The PIC18LF4420-I/PT employs an enhanced Harvard architecture with a 16-bit instruction word and 8-bit data path, achieving 200ns minimum instruction execution at 40MHz. Internal Phase-Locked Loop (PLL) support and an internal 31kHz to 8MHz oscillator reduce external component count, while the nanoWatt technology provides multiple power-managed modes (Idle, Sleep) for battery-powered applications. Typical applications include industrial control panels, automotive body electronics (non-safety), sensor node interfaces, HVAC controllers, low-power remote controls, and consumer white goods. The wide 2.0V to 5.5V operating range supports both 3.3V and 5V system designs. When designing with this device, ensure decoupling capacitor placement (100nF) close to VDD pins and that MCLR is pulled high through a resistor for normal operation. The 44-TQFP package has a relatively large 10x10 mm footprint - if board space is critical, consider the QFN-package variant PIC18LF4420-I/ML. This page synthesizes distributor pricing, drop-in PIC18F/LF family alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
PIC18LF4420T-I/ML - 16KB Flash 8-bit MCU 44-QFN | Microchip
PIC18LF4420T-I/ML

PIC18LF4420T-I/ML - 16KB Flash 8-bit MCU 44-QFN | Microchip

The Microchip PIC18LF4420T-I/ML is an 8-bit RISC microcontroller from the PIC18F family, offering 16 KB of Flash program memory, 768 bytes of SRAM, and 256 bytes of EEPROM, housed in a 44-pin QFN (ML) package with tape-and-reel packaging. It executes instructions at up to 10 MIPS through a 40 MHz oscillator, integrates a 10-bit ADC with up to 13 channels, and operates from 2.0 V to 5.5 V across industrial temperature ranges. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, working RAM, and programmable peripherals. The PIC18LF architecture uses an enhanced 8-bit Harvard RISC core with a 16-bit instruction word, placing it within the broader hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. The LF prefix designates the low-voltage variant, allowing battery-powered and 3.3 V designs without efficiency loss compared to the 5 V-only F-series. Key features include nanoWatt Technology for dynamic power management with multiple idle and sleep modes, a 10-bit successive-approximation ADC with automatic acquisition, dual analog comparators, one Enhanced Capture/Compare/PWM (ECCP) module and one CCP module, MSSP (SPI/I2C) and Enhanced USART peripherals, a 16-bit timer/counter plus two 8-bit timers, and a 13-channel 10-bit ADC. The device supports in-circuit serial programming (ICSP) and self-programming. The PIC18LF4420 implements an enhanced Harvard architecture with separate program and data buses, a hardware multiplier, and a priority-level interrupt controller supporting both vectored and polled interrupt models. nanoWatt Technology provides INTOSC, INTOSCIO, and secondary oscillator modes for low-power operation. Typical applications include industrial control panels, low-power sensor nodes, HVAC thermostats, portable instrumentation, and battery-powered metering devices where the LF voltage range and QFN footprint enable compact PCB layouts. The 36 I/O pins provide flexible peripheral mapping for mixed analog and digital interfaces. When designing with this device, ensure the QFN thermal pad is soldered to a sufficient copper pour for heat dissipation, place decoupling capacitors within 5 mm of each power pin, and configure the configuration bits correctly for the chosen oscillator mode. This page synthesizes drop-in alternatives, comparison data, and practical design notes compiled from Microchip datasheets and distributor inventories.

询价 联系我们
PIC18LF4423-I/PT - 8-Bit 40MHz 16KB Flash MCU | Microchip
PIC18LF4423-I/PT

PIC18LF4423-I/PT - 8-Bit 40MHz 16KB Flash MCU | Microchip

The Microchip Technology PIC18LF4423-I/PT is an 8-bit PIC18 family CMOS flash-based microcontroller running up to 40 MHz (10 MIPS), integrating 16 KB (8K x 16) of program Flash and 768 bytes of SRAM in a 44-pin TQFP (PT) package. The LF suffix denotes the wide 2.0-5.5V operating range optimized for low-voltage F-series designs. What is a PIC18 microcontroller? PIC18 microcontrollers are 8-bit RISC MCUs built on Microchip's enhanced Harvard architecture, supporting up to 16 MIPS throughput with a 16-bit instruction word and 8-bit data path. They occupy the mid-tier of the PIC family hierarchy: PIC microcontroller -> 8-bit MCU -> enhanced RISC core -> PIC18 sub-family -> peripheral-rich variants with ADC, PWM, and communication peripherals. Key features include 36 digital I/O pins, a 10-bit A/D converter with up to 13 channels, multiple serial interfaces (EUSART, MSSP for SPI/I2C), Capture/Compare/PWM modules, and nanoWatt Technology for power-managed sleep modes. The 40 MHz Fosc yields 100 ns instruction cycle with 4x PLL options, supporting demanding real-time control tasks. The device uses Harvard bus architecture with separate program Flash and data SRAM paths, plus internal 32 kHz oscillator and PLL for flexible clocking. On-board self-programmability via ICSP enables field firmware upgrades, while the enhanced instruction set adds hardware multiply and direct register operations, simplifying C compiler code generation for portable firmware. Typical applications include industrial control panels, HVAC sensor interfaces, low-power consumer appliances, USB/HID peripherals, and battery-powered instrumentation. Its low-voltage LF operation makes it suitable for 2-3 AA cell designs or 3.3V system rails where standard PIC18F parts would otherwise be incompatible. Key design consideration: the wide 2.0-5.5V supply range provides flexibility, but designers must respect Vdd minimums during A/D conversions (typically 3.0V for specified 10-bit accuracy); configure ADC acquisition time accordingly. This page consolidates distributor stock data, parametric drop-in alternatives, and engineering design notes drawn from Microchip documentation to help embedded engineers select and qualify the PIC18LF4423 quickly.

询价 联系我们
PIC18LF4423T-I/ML - 8-bit 40MHz 16KB Flash MCU | Microchip
PIC18LF4423T-I/ML

PIC18LF4423T-I/ML - 8-bit 40MHz 16KB Flash MCU | Microchip

The Microchip Technology PIC18LF4423T-I/ML is an 8-bit PIC18 family RISC microcontroller delivering 16 KB of Flash program memory and 768 bytes of SRAM, housed in a 44-pin QFN package with exposed pad (ML suffix). Operating from 2.5 V / 3.3 V / 5 V supplies, the device runs at up to 40 MHz and integrates 34 I/O pins, a 10-bit ADC, nanoWatt power-management technology, and an enhanced FLASH memory architecture. The "LF" prefix denotes the wide-voltage F-grade core designed for low-power applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals. The PIC18 family is Microchip's enhanced 8-bit architecture, sitting between the baseline PIC10/12/16 families and the 16-bit PIC24/dsPIC line in Microchip's taxonomy (8-bit MCU -> PIC18 -> enhanced FLASH microcontroller -> semiconductor). The LF sub-family specifically targets battery-powered and energy-conscious designs with extended low-voltage operation. Key features include 16 KB (8K x 16) Flash, 768 bytes SRAM, 256 bytes EEPROM, 10-bit A/D converter with up to 13 input channels, 2 capture/compare/PWM modules, a USART, MSSP (SPI/I2C), 2 analog comparators, and nanoWatt technology that drops supply current below 1 microampere in sleep mode. The 44-pin QFN package has an exposed thermal pad for improved heat dissipation. The PIC18LF4423 architecture uses a Harvard design with separate program and data buses, an 8-bit ALU with hardware multiply support, and a 16-bit instruction word. The wide supply range (2.0 V to 5.5 V for the LF core, with the part characterized at 2.5 V / 3.3 V / 5 V) makes it suitable for both 3.3 V and 5 V systems. The nanoWatt power-management features include multiple idle modes, peripheral disable controls, and a real-time clock calibration circuit. Typical applications include industrial control panels, low-power sensor nodes, home appliances, automotive body electronics, HVAC controls, and USB/HID human-interface devices. The wide operating voltage makes the part especially attractive for battery-backed or unregulated-supply designs where the source voltage varies with load. When designing with this part, ensure the QFN exposed pad is soldered to the ground plane to meet thermal specifications. The device operates from -40 C to +85 C in the Industrial temperature range and supports in-circuit serial programming (ICSP) via two pins, enabling firmware updates in the field without removing the MCU. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes drawn from the manufacturer datasheet and authorized distributor listings - information not aggregated in any single manufacturer or distributor source.

询价 联系我们
PIC18LF4423T-I/PT - 8-bit MCU, 16KB Flash, 40MHz, TQFP-44
PIC18LF4423T-I/PT

PIC18LF4423T-I/PT - 8-bit MCU, 16KB Flash, 40MHz, TQFP-44

The Microchip Technology PIC18LF4423T-I/PT is an 8-bit RISC PIC microcontroller featuring 16KB of Flash program memory, 768 bytes of RAM, and 256 bytes of EEPROM, housed in a 44-pin TQFP (10x10 mm) package. It operates up to 40 MHz delivering up to 16 MIPS, with a wide supply voltage range of 2.0V to 5.5V and 34 digital I/O lines, plus a 10-bit ADC and nanoWatt power management for low-power designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, and peripheral interfaces. Within the broader taxonomy of embedded semiconductors, the PIC18 family sits above generic 8-bit MCUs and below 16/32-bit MCUs such as dsPIC and ARM Cortex-M parts. The 'LF' prefix in PIC18LF4423 denotes a wide-voltage, low-power variant of the F-series core, while 'nanoWatt' refers to Microchip's suite of power-saving modes including Sleep, Idle, and ultra-low-power ADC operation. The PIC18LF4423T-I/PT integrates a 10-bit A/D converter with up to 13 input channels, capture/compare/PWM modules, an Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART), Master I2C and SPI interfaces with Inter-Integrated Circuit bus support, and parallel slave port for external memory expansion. The integrated nanoWatt technology enables deep-sleep currents below typical PIC18 baselines, making it well-suited to battery-powered applications. Industrial-grade temperature range of -40C to +85C is supported via the 'I' designator. Architecturally, the device uses Microchip's RISC core with 77 instructions and a modified Harvard architecture providing separate program and data buses, plus an 8-level hardware stack. The 16KB Flash supports self-programming and In-Circuit Serial Programming (ICSP) via two pins. Internal oscillator options and a 16x8 hardware multiplier round out the engineer's toolset for cost-sensitive 8-bit designs. Typical applications include industrial control sensor interface boards, USB-interface bridges, small LCD display controllers, low-speed motor control drivers, and remote sensor nodes. The 16KB Flash and 10-bit ADC provide enough headroom for PID loops and basic signal conditioning without resorting to a 32-bit MCU. When designing with this part, pay attention to the 5.5V absolute maximum on VDD. Use decoupling capacitors of 0.1uF plus 10uF bulk close to the power pins, and ensure the MCLR reset line has a proper pull-up. For low-power Sleep mode, use the Run/Idle/Stop nanoWatt modes and shut down the ADC to achieve minimum quiescent draw. This page synthesizes distributor pricing, drop-in TQFP-44 alternatives, and practical PCB design notes not consolidated in the manufacturer datasheet, with cross-references back to Microchip's official PIC18LF4423 datasheet.

询价 联系我们
PIC18LF442T-I/ML - 8-bit MCU, 16KB FLASH, 40MHz, 44-QFN | Microchip
PIC18LF442T-I/ML

PIC18LF442T-I/ML - 8-bit MCU, 16KB FLASH, 40MHz, 44-QFN | Microchip

The Microchip Technology PIC18LF442T-I/ML is an 8-bit RISC microcontroller from the PIC18 family featuring 16KB of FLASH program memory (8K x 16 words), 768 bytes of RAM, and 256 bytes of EEPROM data memory, operating at up to 40MHz from a 2.0V to 5.5V supply in a 44-pin QFN (ML) package. What is a PIC18 microcontroller? A PIC18 is an 8-bit microcontroller from Microchip Technology's PICmicro family using a Harvard architecture RISC core with a 16-bit instruction word and 8-bit data path. The PIC18 sits at the upper tier of the 8-bit PIC family, offering enhanced peripherals, C-optimized architecture, and self-programmability. Within the broader taxonomy: PIC18 -> 8-bit MCU -> microcontroller -> embedded controller -> semiconductor IC. The 'LF' prefix designates the low-voltage, low-power variant supporting 2.0V to 5.5V operation, while 'F' variants typically require 4.2V to 5.5V. Key features include 34 digital I/O pins, 10-bit multi-channel ADC, Capture/Compare/PWM (CCP) modules, two 8-bit and three 16-bit timers, USART, MSSP (SPI/I2C), 256 bytes of EEPROM, and an external oscillator interface up to 40MHz. The integrated nanoWatt technology provides power-managed modes for sleep, idle, and peripheral operation at microamp currents. The device supports In-Circuit Serial Programming (ICSP) and In-Circuit Debugger (ICD). The PIC18LF442 implements a modified Harvard architecture with a 16-bit program bus and an 8-bit data bus, achieving 10 MIPS at 40MHz. The 31-level hardware stack, 32 interrupt vectors, and 75 instructions (83 with extended instruction set) provide efficient C code generation. The 44-QFN (ML) package offers compact PCB integration with an exposed thermal pad for improved thermal dissipation. Typical applications include industrial control, low-power sensor nodes, HVAC thermostat controllers, battery chargers, automotive body electronics (non-safety), home appliances, and USB device interfaces. The wide operating voltage and low-power modes make it well-suited for energy-harvesting designs. When designing with this MCU, ensure the ICSP programming header follows Microchip's 6-pin layout (PGM/RB7, PGC/RB6, VPP/MCLR, VDD, VSS, NC). The 44-QFN package requires careful PCB land pattern design; refer to Microchip package drawings for proper thermal pad soldering. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

询价 联系我们
PIC18LF4431-I/ML - 8-bit 40MHz 16KB Flash MCU | Microchip | 44-QFN
PIC18LF4431-I/ML

PIC18LF4431-I/ML - 8-bit 40MHz 16KB Flash MCU | Microchip | 44-QFN

The Microchip Technology PIC18LF4431-I/ML is an 8-bit PIC18F-family microcontroller running at 40 MHz with 16 KB (8K x 16) of enhanced flash program memory and 768 bytes of RAM, packaged in a 44-pin QFN (8x8 mm). The LF prefix designates the low-voltage variant with 2.0-3.6V VDD operation suitable for battery-powered designs, while the 1/ML suffix indicates the industrial temperature grade (-40C to +85C) and QFN surface-mount package. An 8-bit microcontroller (MCU) is a single-chip computer integrating a CPU, RAM, non-volatile program memory, and peripherals. The PIC18F architecture is a RISC-based Harvard design that executes most instructions in a single 200 ns cycle, achieving up to 10 MIPS throughput. Within the broader taxonomy, PIC18F sits between mid-range PIC16 and high-end dsPIC/32-bit MCUs, targeting cost-sensitive embedded control with strong interrupt handling and deterministic timing. Key features include 34 digital I/O pins, 10-bit ADC with up to 9 channels, multiple PWM modules with high-performance motion-feedback support (Power Control PWM), three 16-bit timers and one 8-bit timer, two comparators, an enhanced USART, MSSP (SPI/I2C), and nanoWatt power-management modes for sleep currents below 1 uA. The 44-QFN exposes 34 I/O while keeping board footprint compact at 8x8 mm with an exposed thermal pad for improved dissipation. The PIC18LF4431 uses Microchip's enhanced flash cell with self-programming support and an ICD-friendly debug interface. On-chip peripherals map to motion-control, motor-drive, and power-conversion functions — the device is part of the PIC18F2331/2431/4331/4431 family optimized for high-performance PWM feedback loops, making it a natural fit for BLDC, switched-mode power supply, and UPS control applications. Typical applications include BLDC and PMSM motor control, switch-mode power supply control, UPS and inverter control, industrial sensor conditioning, automotive body electronics, and low-power battery instruments. Designers use the on-chip 10-bit ADC for current/voltage sensing and the dedicated PWM module for driving power switches with programmable dead-band and fault input. When designing with this device, ensure the QFN exposed pad is soldered to a sufficient ground copper pour (typically 1 square inch or more) to meet the 4 W thermal dissipation capability of the package. Decouple VDD with a 100 nF ceramic placed within 5 mm of the IC, plus a bulk 10 uF tantalum or ceramic; the LF core needs a stable 3.3 V rail to avoid LVD-induced resets. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
PIC18LF4431-I/P - 8-bit PIC18 40MHz 16KB Flash MCU | Microchip
PIC18LF4431-I/P

PIC18LF4431-I/P - 8-bit PIC18 40MHz 16KB Flash MCU | Microchip

The Microchip Technology PIC18LF4431-I/P is an 8-bit PIC18 family microcontroller with nanoWatt Technology, 16KB of Flash program memory, 768 bytes of RAM, and a 40 MHz maximum CPU clock, housed in a 40-pin PDIP (DIP-40) through-hole package. The part integrates a 10-bit Analog-to-Digital Converter, a high-performance PWM module suitable for motor control, and 34 digital I/O pins, all within an industrial temperature range of -40C to +85C. An 8-bit microcontroller (MCU) is a programmable integrated circuit that uses an 8-bit data path, executes instructions from on-chip Flash memory, and integrates CPU, RAM, non-volatile storage, and peripherals (ADC, PWM, timers, communication) into a single chip. The PIC18LF family sits above PIC16 in Microchip's 8-bit hierarchy and is widely used where deterministic interrupt response, low power, and proven toolchains matter more than raw compute. The 'LF' suffix designates the wide-voltage variant that operates across 2.0V-5.5V, while the 'F' (non-LF) version targets 4.2V-5.5V only. Key features include 16KB (8K x 16) Flash program memory, 768 bytes of data RAM, a 10-bit ADC with multiple channels, an enhanced CCP (Capture/Compare/PWM) module with up to 14-bit resolution for motor control, and nanoWatt Technology power management offering Sleep, Idle, and Run modes. The 40-pin PDIP package is the most legacy-friendly footprint in the PIC18 line and is preferred for prototyping, hobbyist designs, and educational platforms. The PIC18LF4431-I/P uses Microchip's enhanced Harvard RISC architecture with 16-bit instructions, 8-bit data, and a hardware multiplier, executing up to 10 MIPS at 40 MHz. Code is fetched from Flash through a 16-bit program bus while data moves on an 8-bit bus, which together enable single-cycle instruction execution and predictable timing for interrupt-driven firmware. Typical applications include three-phase induction motor control (BLDC, PMSM), HVAC fan and pump control, industrial automation, SMPS digital control loops, automotive body electronics (via the automotive-grade PIC18F4431-I/P sibling), and educational/development boards. The integrated high-resolution PWM and ADC are tuned specifically for closed-loop motor control firmware. When designing with this MCU, remember that 'LF' denotes the wide-voltage variant - do not swap it for the non-LF PIC18F4431 in 3.3V-only designs. Programming is done via ICSP through PGC/PGD pins, and MPLAB X IDE plus MPLAB XC8 are the supported toolchains. ESD-sensitive pins (especially analog inputs) require series resistors and clamping. This page synthesizes distributor pricing, drop-in alternative MPNs from the same PIC18 family, and practical design notes not consolidated in the manufacturer datasheet alone.

询价 联系我们
PIC18LF4431-I/PT - 8-bit PIC MCU, 16KB Flash, 40MHz, 44-TQFP | Microchip
PIC18LF4431-I/PT

PIC18LF4431-I/PT - 8-bit PIC MCU, 16KB Flash, 40MHz, 44-TQFP | Microchip

The Microchip Technology PIC18LF4431-I/PT is an 8-bit PIC18 enhanced flash microcontroller with nanoWatt technology, integrating 16KB of program flash, 768 bytes of SRAM, a 10-bit ADC, and high-performance PWM peripherals in a 44-pin TQFP package. It features a 40 MHz maximum clock frequency, 34 digital I/O lines, and is engineered for low-power operation across an industrial temperature range of -40C to +85C. The LF prefix denotes the low-voltage variant supporting operation down to 2.0V. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, data memory, and peripheral interfaces on a single die, allowing embedded control of sensors, actuators, and communication buses. The PIC18 family belongs to the broader 8-bit RISC microcontroller hierarchy, which itself sits within the wider class of microcontrollers (MCU) -> embedded processors -> semiconductor devices. PIC18 MCUs implement a modified Harvard architecture with a 16-bit instruction word and 8-bit data path, optimized for deterministic interrupt latency and low-power sleep modes. Key features of the PIC18LF4431 include the nanoWatt power-management suite (multiple idle and sleep modes), a 10-bit ADC with up to 9 input channels, a 14-bit High-Speed PWM module suitable for motor control and power conversion, two USART modules for asynchronous and synchronous serial communication, an I2C/SPI peripheral pair, and an enhanced Capture/Compare/PWM (ECCP) module. The device supports in-circuit serial programming (ICSP) and in-circuit debugging (ICD) via Microchip's MPLAB toolchain, enabling rapid firmware iteration. Architecturally, the PIC18LF4431 uses Microchip's enhanced flash cell with a 100K erase/write cycle endurance and a typical data retention of greater than 40 years. The 8-bit data path and 16-bit instruction word deliver up to 10 MIPS at 40 MHz, with most single-word instructions executing in 4 clock cycles. Internal oscillator options and a wide operating voltage range (2.0V to 5.5V) provide design flexibility for battery-powered and industrial 24V-tolerant systems with external regulation. Typical applications include BLDC and brushed DC motor control, switched-mode power supply (SMPS) digital control loops, industrial sensor conditioning, HVAC fan control, LED lighting drivers, and automotive body/comfort subsystems. The 14-bit PWM with 60 ns resolution is especially valuable in digital power and motor-drive applications where fine duty-cycle granularity is required. Designers should note that the 5.5V absolute maximum on VDD requires a brown-out reset (BOR) configuration in firmware and adequate decoupling (100 nF + 10 uF bulk) within 5 mm of the supply pins. Migration between PIC18F and PIC18LF variants is straightforward because they share the same pinout, but the LF variant's lower minimum voltage (2.0V vs 4.2V) must be respected during firmware power-mode selection. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the standalone manufacturer datasheet, giving engineers a single, citable reference for sourcing and substitution decisions.

询价 联系我们
PIC18LF4431T-I/ML - 8-bit 40MHz 16KB Flash MCU 44-QFN | Microchip
PIC18LF4431T-I/ML

PIC18LF4431T-I/ML - 8-bit 40MHz 16KB Flash MCU 44-QFN | Microchip

The Microchip Technology PIC18LF4431T-I/ML is an 8-bit PIC RISC microcontroller operating at up to 40 MHz with 16 KB (8K x 16) of program Flash memory, packaged in a 44-lead QFN (8x8 mm) with exposed pad. It belongs to the PIC18F2331/2431/4331/4431 family and is the low-voltage (LF) variant optimized for 2.5V/3.3V/5V operation. The device integrates 768 bytes of RAM, 256 bytes of EEPROM, and 9 channels of 10-bit analog-to-digital conversion. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and a rich set of peripherals such as ADCs, timers, communication interfaces, and GPIO. The PIC18LF4431 belongs to the 8-bit PIC RISC family, sitting within the broader hierarchy 8-bit MCU -> microcontroller -> embedded controller -> semiconductor. Its modified Harvard architecture and 16-bit instruction word provide higher code density than many 8-bit peers, while the LF process node enables lower active and sleep current draw for battery-powered designs. Key features include an enhanced Flash program memory rated for typical 100K erase/write cycles, 10 MIPS sustained throughput at 40 MHz, multiple serial interfaces (I2C, SPI, UART/USART), a 10-bit ADC with up to 9 channels, and power-managed modes with fast wake-up. The 'T' suffix indicates Tape & Reel packaging and the 'I' suffix designates the industrial temperature grade of -40C to +85C, suitable for harsh environments. Typical applications include motor control (the 4331/4431 sub-family is specifically designed for closed-loop brushless DC and switched-reluctance motor drives), sensor conditioning, industrial automation, white goods, and general-purpose embedded control where low-power, low-voltage operation and a compact QFN footprint are required. When designing with this part, allocate sufficient PCB copper area beneath the exposed pad (EP) of the QFN-44 to meet thermal dissipation requirements and improve electrical grounding. Decouple VDD with at least 100 nF and 10 uF capacitors placed within 5 mm of the supply pins. The LF process limits maximum VDD to roughly 5.5 V, so verify rail tolerance if migrating from the F variant. This page synthesizes distributor pricing, drop-in 44-QFN alternatives, parametric comparison, and practical QFN PCB layout guidance that go beyond the raw manufacturer datasheet, helping engineers accelerate motor-control and general-purpose 8-bit designs.

询价 联系我们
PIC18LF4439-I/ML - 8-bit 40MHz MCU, 12KB Flash, 44-QFN | Microchip
PIC18LF4439-I/ML

PIC18LF4439-I/ML - 8-bit 40MHz MCU, 12KB Flash, 44-QFN | Microchip

The Microchip Technology PIC18LF4439-I/ML is an 8-bit PIC microcontroller built on an enhanced RISC architecture, operating at up to 40 MHz with 12 KB of FLASH program memory (6K x 16) and 640 bytes of RAM, housed in a 44-pin QFN (8x8 mm) package with an exposed thermal pad. The 'LF' prefix denotes the extended low-voltage family supporting 2.0V-3.3V operation plus 5V-tolerant I/O, making it well suited to mixed-voltage designs and battery-powered applications. The PIC18 microcontroller is an 8-bit Harvard-architecture RISC MCU family originally developed by Microchip. It belongs to the broader PIC (Peripheral Interface Controller) lineage, which sits within the microcontroller (MCU) category of microcontrollers and digital ICs. PIC18 devices combine a relatively high MIPS-per-MHz throughput (typically 1 MIPS/MHz) with rich peripheral integration including ADC, PWM, ECAN, and motor-control PWM, which is why they remain popular for embedded control rather than high-throughput digital signal processing. Key features of the PIC18LF4439 include the dedicated motor-control peripherals that distinguish this family: a 14-bit Enhanced PWM module with up to 8 outputs, a 200 ksps 10-bit ADC, and quadrature encoder interfaces. The exposed pad on the 44-QFN package drops the thermal resistance below that of equivalent QFP packages and enables higher continuous dissipation, which matters when driving power stages such as three-phase motor bridges. Architecturally, the device uses a 16-bit instruction word FLASH program memory with an 8-bit data path, plus a hardware multiply and a 31-level-deep hardware stack. Its wide operating voltage range (2.0V to 5.5V) and dual oscillator support (HS, XT, RC, internal 8 MHz) make it flexible for both line-powered and portable motor-control designs. Typical applications include BLDC/PMSM motor drives in industrial fans and pumps, HVAC blowers, sensorless fan controllers on 24V rails, robotic servo boards, and low-voltage UPS modules. Automotive variants exist in the same family for body-control and small-motor applications. Key design consideration: place the 0.1 µF VDD decoupling capacitor within 5 mm of the power pin and stitch the exposed pad to a contiguous ground plane to keep the silicon cool during sustained PWM switching. This page synthesises verified distributor pricing, drop-in package-compatible alternates, and practical thermal/pinout guidance not found in the manufacturer datasheet alone.

询价 联系我们
PIC18LF4439-I/P - 8-Bit 40MHz MCU 12KB Flash 40-PDIP | Microchip
PIC18LF4439-I/P

PIC18LF4439-I/P - 8-Bit 40MHz MCU 12KB Flash 40-PDIP | Microchip

The Microchip Technology PIC18LF4439-I/P is an 8-bit RISC microcontroller belonging to the PIC18F family, featuring 12KB (6K x 16) of FLASH program memory, 640 bytes of RAM, and 32 I/O pins, all housed in a 40-pin PDIP (DIP) through-hole package. It integrates a 40 MHz CPU core with an enhanced 16-bit instruction set and is designed for industrial temperature operation (-40C to +85C), making it suitable for harsh embedded environments. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, and peripherals on a single die. The PIC18F family uses a Harvard-architecture RISC core with a 16-bit instruction word and 8-bit data path, sitting in the broader semiconductor hierarchy of microcontroller -> embedded processor -> semiconductor device. The 'LF' prefix designates low-voltage operation (typically 2.0V-3.6V), enabling battery-powered and portable designs where standard 5V PIC18F parts would be unsuitable. Key features include a 10-bit ADC with up to 8 channels, multiple PWM outputs suitable for motor control, a USART, MSSP (SPI/I2C), capture/compare/PWM modules, and dual analog comparators. The PIC18LF4439 also includes special motor-control peripherals, notably the Power Control PWM module and quadrature encoder interface, distinguishing it within the PIC18F lineup for motion-control applications. The architecture uses a Harvard-memory RISC core with hardware multiplier and 32-level stack, achieving up to 10 MIPS throughput at 40 MHz. The integrated motor-control PWM block delivers up to 14-bit resolution with center-aligned or edge-aligned modes, supporting complementary outputs with programmable dead-time insertion - a feature targeted at three-phase inverter designs. The 10-bit ADC with dual Sample-and-Hold enables simultaneous voltage and current sensing in FOC (field-oriented control) loops. Typical applications include BLDC motor control (single/three-phase), industrial drives, HVAC fan/blower controllers, home automation, low-power sensor platforms, and battery-powered instrumentation where the wide 2.0V-3.6V operating range is critical. When designing with this device, ensure proper decoupling (100 nF + 10 uF near VDD/AVDD pins) and that the MCLR pin is tied through a pull-up resistor with the standard ICSP layout for in-circuit serial programming retention. This page synthesizes distributor pricing, drop-in alternatives, parametric comparisons, and practical design notes for the PIC18LF4439-I/P that are not collated in the manufacturer datasheet alone.

询价 联系我们