集成电路

子分类

📁 ADC/DAC 2520 产品 📁 放大器IC 800 产品 📁 音频编解码器 16 产品 📁 音频IC 2 产品 📁 时钟与计时 314 产品 📁 DSP 963 产品 📁 数据采集IC 2 产品 📁 数字电位器 4 产品 📁 显示驱动与控制器 1 产品 📁 FPGA与CPLD 6666 产品 📁 接口IC 1603 产品 📁 LED驱动器 1 产品 📁 逻辑IC 305 产品 📁 存储IC 875 产品 📁 微控制器 18756 产品 📁 微处理器 4 产品 📁 电机驱动器 1 产品 📁 其他 1 产品 📁 Sensor and Detector Interfaces 1 产品 📁 专用IC 15 产品 📁 视频IC 13 产品

产品（32865)

PIC24EP512GP204-I/PT - 70 MIPS 16-bit MCU, 512KB Flash, 44-TQFP | Microchip
PIC24EP512GP204-I/PT

PIC24EP512GP204-I/PT - 70 MIPS 16-bit MCU, 512KB Flash, 44-TQFP | Microchip

The Microchip Technology PIC24EP512GP204-I/PT is a 16-bit microcontroller from the PIC24E general-purpose family featuring a 70 MIPS high-performance CPU core, 512 KB Flash program memory, and 48 KB RAM, housed in a 44-pin TQFP (10x10 mm) package. It integrates advanced analog peripherals including operational amplifiers, comparators, a 10/12-bit ADC with up to 1.1 Msps, and the Charge Time Measurement Unit (CTMU) for capacitive touch and accurate time measurement. A Peripheral Trigger Generator (PTG) coordinates complex peripheral sequences without CPU intervention, freeing the core for application logic. Communication interfaces include UART, SPI, I2C, and ECAN, making the device versatile for connected embedded systems. The PIC24E architecture represents a 16-bit modified Harvard RISC family in the broader microcontroller taxonomy: microcontroller -> 16-bit MCU -> DSC (digital signal controller) -> PIC24E. Microcontrollers integrate a CPU core, program/data memory, peripherals, and I/O on a single die, and the 16-bit class offers superior arithmetic throughput versus 8-bit MCUs while retaining simpler toolchains than 32-bit Cortex-M parts. The PIC24EP sub-family emphasizes enhanced peripherals including high-speed PWM, op-amps, and superior ADC performance for motor, power-conversion, and instrumentation designs. Code density is excellent thanks to the 24-bit instruction width with 16-bit data path. Key features include 70 MIPS sustained CPU performance from a 70 MHz CPU clock, 512 KB self-programmable Flash with ECC, 48 KB SRAM, dedicated DMA, and a Peripheral Pin Select (PPS) system that remaps digital peripherals to a wide range of I/O pins. The integrated CTMU enables capacitive touch sensing and precise delay/time-of-flight measurements. The PTG peripheral can choreograph complex ADC+PWM sequences independently of the CPU, dramatically reducing interrupt overhead in real-time control loops. Technical depth: the PIC24E core uses a five-stage pipeline with single-cycle 16x16 MAC, supporting DSP-style signal processing directly in C. The 12-bit ADC can reach 1.1 Msps across up to nine analog channels with dual sample-and-hold, and the four on-chip op-amps can be configured as gain stages, filters, or comparators. PPS routing allows most digital peripherals to be assigned to a wide selection of I/O pins, simplifying PCB layout. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital power conversion (digital PFC, LLC, full-bridge), advanced sensor signal conditioning, capacitive touch human-machine interfaces, and industrial CAN-connected controllers. Designers appreciate the combination of deterministic 16-bit performance with rich analog integration. When designing with this part, ensure VDD is decoupled with at least 100 nF and 10 uF bulk capacitors close to the supply pins. Program the configuration bits to match your oscillator and watchdog intent before code execution. The 44-pin TQFP footprint simplifies hand prototyping and reflow assembly, and JTAG/ICSP programming is supported via dedicated pins. This page synthesizes distributor stock levels, drop-in alternatives sourced from Microchip's same-family pin-compatible parts, parametric comparison, and practical design notes that complement (rather than duplicate) the manufacturer datasheet.

询价 联系我们
PIC24EP512GP204-I/TL - 70 MIPS 16-Bit MCU, 512KB Flash, 44-VTLA | Microchip
PIC24EP512GP204-I/TL

PIC24EP512GP204-I/TL - 70 MIPS 16-Bit MCU, 512KB Flash, 44-VTLA | Microchip

The Microchip Technology PIC24EP512GP204-I/TL is a 16-bit microcontroller from the PIC24E general-purpose MCU family, featuring a 70 MIPS high-performance core, 512KB of Flash program memory, and 48KB of RAM, housed in a 44-pin VTLA (6x6 mm) surface-mount package. The device integrates advanced analog peripherals including operational amplifiers, comparators, CTMU (Charge Time Measurement Unit), and a Peripheral Trigger Generator (PTG) for complex timing and signal-chain automation. This part belongs to the PIC24E family of digital signal controllers, which are 16-bit modified Harvard architecture MCUs designed for mixed-signal embedded applications. The "PIC24EP" sub-family emphasizes enhanced performance (EP) with features like high-speed PWM, dual op-amps, and a 12-bit ADC with up to 500 ksps throughput, positioning it between basic PIC24F and the higher-end dsPIC33E families. Engineers select PIC24E devices when they need deterministic real-time control, ample code space, and rich analog integration without migrating to a 32-bit ARM core. Key features of the PIC24EP512GP204-I/TL include 512KB Flash (170K x 24 words), 48KB SRAM, 70 MIPS execution at 60 MHz CPU clock, integrated dual op-amps (configurable as amplifiers or comparators), a 10/12-bit ADC with up to 500 ksps sampling rate, three 3-wire SPI modules, four UART modules, and two I2C modules. The PTG peripheral generates complex hardware-triggered event sequences without CPU intervention, while the CTMU enables precise time-domain capacitance measurement for touch and proximity sensing. Architecturally, the PIC24EP512GP204 uses a modified Harvard architecture with separate 24-bit program and 16-bit data paths, a 16x16 hardware multiplier, and a 40-bit ALU. The VTLA (Very Thin Land Array) 44-pin package at 6x6 mm provides a compact footprint with an exposed thermal pad for thermal management. Wide operating voltage (3.0V to 3.6V) and an industrial temperature range of -40C to +85C (denoted by the "-I" speed grade) make the device suitable for industrial control environments. Typical applications include motor control (BLDC, stepper, PMSM) using the high-speed PWM, power conversion digital control loops, industrial sensor conditioning using the on-chip op-amps, capacitive touch interfaces via CTMU, USB device peripherals (with external transceiver), and general-purpose embedded control in factory automation and consumer appliances. The integrated analog front-end reduces BOM and PCB area significantly compared to discrete MCU + external op-amp designs. When designing with this MCU, ensure that the VTLA package's exposed thermal pad is soldered to a continuous ground copper pour for proper thermal and electrical performance. Decoupling requires at minimum a 100nF ceramic capacitor adjacent to each VDD/VSS pair plus a bulk 10uF capacitor on the main 3.3V rail. JTAG programming requires dedicated pins that must not be repurposed in the final PCB layout. This page synthesizes distributor pricing, drop-in alternatives from the same PIC24E family, and practical design notes that are not consolidated in any single datasheet.

询价 联系我们
PIC24EP512GP204T-E/PT - 60 MIPS 512KB Flash 16-bit MCU | Microchip
PIC24EP512GP204T-E/PT

PIC24EP512GP204T-E/PT - 60 MIPS 512KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24EP512GP204T-E/PT is a 16-bit microcontroller from the PIC24EP general-purpose family, delivering up to 60 MIPS of computational performance from a modified Harvard PIC core running at 60 MHz, housed in a 44-pin TQFP (10x10 mm) package. It integrates 512 KB of Flash program memory organized as 170K x 24 words, 48 KB of on-chip SRAM, and an enhanced peripheral set including high-speed PWM, operational amplifiers, comparators, CTMU, and a Peripheral Trigger Generator (PTG). The -E temperature grade extends the operating range to -40 °C to +125 °C and the part carries automotive AEC-Q100 qualification, making it suitable for safety-relevant designs. What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer integrating a CPU core, program memory, data memory, and peripherals. The PIC24EP family is a 16-bit MCU family from Microchip that sits between 8-bit PIC16/PIC18 parts and 32-bit PIC32 devices in the product hierarchy: 8-bit MCU -> 16-bit MCU -> 32-bit MCU -> microprocessor. The 16-bit modified Harvard core executes most instructions in a single cycle, providing deterministic real-time response for motor control, power conversion, and signal processing tasks. Key differentiating features include the Peripheral Trigger Generator (PTG) for hardware-state-machine-based peripheral coordination without CPU intervention, on-chip operational amplifiers that eliminate external analog front-end components, and a Charge Time Measurement Unit (CTMU) for capacitive touch and precise time-domain measurements. The high-performance ADC and fast PWM suit closed-loop control of motors, power supplies, and lighting. The architecture uses a 16-bit modified Harvard pipeline with 24-bit-wide instructions, a hardware multiply/divide unit, and DSP-friendly addressing modes. An 8-channel DMA engine moves data between peripherals and memory without CPU load, allowing deterministic throughput for streaming applications such as audio processing or sensor fusion. Typical applications include automotive body and chassis ECUs, industrial motor drives, digital power conversion, LED lighting controllers, capacitive-touch user interfaces, and sensor-hub designs. The PTG enables complex multi-peripheral sequencing for safety-critical applications. Compared to 8-bit MCUs, the PIC24EP delivers roughly 4-5x higher code density and 10x computational throughput, accelerating time-to-market for new designs.

询价 联系我们
PIC24EP512GP204T-I/MV - 16-bit 70 MIPS 512KB Flash MCU | Microchip
PIC24EP512GP204T-I/MV

PIC24EP512GP204T-I/MV - 16-bit 70 MIPS 512KB Flash MCU | Microchip

The Microchip PIC24EP512GP204T-I/MV is a 16-bit RISC microcontroller from the PIC24E family, delivering 70 MIPS of CPU performance from a PIC24 core clocked up to 60 MHz, housed in a 48-pin UQFN (MV) package measuring 6x6 mm. It integrates 512 KB of Flash program memory (170K x 24 words) and 48 KB of SRAM, alongside high-performance analog peripherals including configurable 10-bit / 1.1 Msps or 12-bit / 500 ksps ADCs, up to three operational amplifiers, comparators, and the Peripheral Trigger Generator (PTG) for deterministic event sequencing. A 16-bit microcontroller (MCU) is a single-chip computer that balances higher computational throughput than 8-bit parts against lower cost and power than 32-bit devices. Within the taxonomy, the PIC24EP belongs to microcontrollers -> 16-bit MCUs -> RISC MCU -> embedded controller -> semiconductor. It targets general-purpose embedded designs where deterministic interrupt response, DSP-class math (a single-cycle MAC), and rich analog integration matter more than the absolute throughput of Cortex-M4 class parts. The 'E' suffix denotes the enhanced high-speed PIC24 core with a 16-bit wide datapath and DSP extensions. Key differentiating features include 35 general-purpose I/O pins, multiple UART/SPI/I2C peripherals, a 16-bit Parallel Master Port (PMP) on selected variants, CTMU for capacitive touch and current measurement, and an extended operating temperature range. The 'T' suffix in the MPN indicates Tape & Reel packaging for high-volume assembly. The MV package (UQFN-48 6x6 mm) provides a compact footprint suitable for space-constrained PCB designs while exposing the full peripheral set. Architecturally, the PIC24EP512GP204T combines a Harvard memory layout with 24-bit instruction words, a 16-bit data path, and a tightly-coupled DSP engine. The PTG peripheral offloads complex timing sequences from the CPU, freeing cycles for application logic. The configurable ADC - usable as a 10-bit, 1.1 Msps 4-channel converter or a 12-bit, 500 ksps single-channel converter - is paired with on-chip op-amps and comparators that can be routed directly into the ADC, reducing external analog conditioning in sensor-interface designs. Typical applications include industrial motor control (BLDC, stepper, servo), digital power conversion (SMPS feedback and PFC), high-precision sensor signal conditioning, medical instrumentation front-ends, LED lighting controllers, and embedded control in automotive body modules (non-safety-critical). The integrated op-amps and comparators make it especially well-suited for closed-loop control loops where analog feedback must be tightly time-aligned with PWM updates. When designing with this device, allocate the on-chip op-amp and comparator resources carefully: only a fixed number can connect directly to the ADC's sample-and-hold, and routing must be planned in MPLAB X IDE at code-generation time. Decoupling should follow Microchip's recommended 100 nF + bulk capacitor placement adjacent to each VDD/VSS pair.

询价 联系我们
PIC24EP512GP204T-I/TL - 16-bit MCU 512KB Flash 44-VTLA | Microchip
PIC24EP512GP204T-I/TL

PIC24EP512GP204T-I/TL - 16-bit MCU 512KB Flash 44-VTLA | Microchip

The Microchip Technology PIC24EP512GP204T-I/TL is a high-performance 16-bit microcontroller from the PIC24E general-purpose MCU family, featuring a 70 MIPS core, 512KB Flash program memory, and 48KB SRAM in a compact 44-pin VTLA (6x6 mm) surface-mount package. It operates across an industrial temperature range of -40C to +85C, integrates dual op-amps, comparators, CTMU, and a Peripheral Trigger Generator (PTG), and delivers up to 70 MHz CPU performance. A PIC24E microcontroller is a 16-bit RISC MCU built on Microchip's enhanced PIC24 architecture, designed to bridge the gap between traditional 8-bit PIC microcontrollers and 32-bit ARM-based devices. Within the broader embedded hierarchy, PIC24E sits between the PIC18 (8-bit) family and the PIC32 (32-bit MIPS) family, offering higher code density, advanced peripherals, and DSP-like instruction set features. The PIC24E GP (General Purpose) series specifically targets high-performance applications requiring rich analog integration and flexible peripheral triggering without dedicated DSP hardware. Key features include 16-channel 10-bit/12-bit ADC capability with up to 500 ksps conversion rate, dual operational amplifiers for analog signal conditioning, four comparators, CTMU for capacitive touch sensing or time measurement, and a Peripheral Trigger Generator that enables complex peripheral sequencing without CPU intervention. The device supports multiple communication interfaces including SPI, I2C, and UART, and includes a high-speed PWM module suited for motor control and power conversion. From a technical depth perspective, the PIC24E core executes most instructions in a single cycle, with DSP-oriented instructions (MAC, ED, EDAC) for efficient digital signal processing in software. The 24-bit instruction width with 16-bit data path provides code density comparable to 32-bit MCUs while retaining a simpler toolchain footprint. The PTG peripheral allows deterministic peripheral event chains, freeing the CPU for higher-level tasks and reducing interrupt overhead. Typical applications include industrial control and automation, motor drive control, digital power conversion, capacitive touch user interfaces, sensor signal conditioning, and high-performance embedded control in space-constrained PCB designs. The compact VTLA-44 package makes it well-suited for portable instrumentation and dense IoT edge nodes. When designing with this part, carefully review the VTLA thermal pad PCB layout recommendations - the exposed thermal pad must be soldered to a sufficiently large copper pour to meet thermal and electrical performance. Memory-mapped peripherals on PIC24E require careful attention to DMA channel assignment and interrupt priority levels. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet, giving engineers a single source for evaluation and sourcing decisions.

询价 联系我们
PIC24EP512GP206-E/MR - 16-Bit 60 MIPS MCU 512KB Flash | Microchip
PIC24EP512GP206-E/MR

PIC24EP512GP206-E/MR - 16-Bit 60 MIPS MCU 512KB Flash | Microchip

The Microchip Technology PIC24EP512GP206-E/MR is a 16-bit microcontroller from the PIC24EP general-purpose family, delivering 60 MIPS of CPU performance and integrating 512 KB of Flash program memory and 24 KB of SRAM in a 64-pin VQFN (9x9 mm) package with exposed thermal pad. The device operates from 3.0 V to 3.6 V, supports 53 general-purpose I/O pins, and includes advanced analog peripherals, high-speed PWM, op amps, CTMU, and a Peripheral Trigger Generator (PTG). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripherals such as timers, ADC, communication interfaces, and GPIO into one package. In the taxonomy of embedded computing, the PIC24EP sits within the digital signal controller / 16-bit MCU category, bridging traditional 8-bit microcontrollers and more powerful 32-bit Cortex-M parts. Its modified Harvard architecture, separate program and data buses, and DSP-class instructions make it suitable for control loops and signal conditioning tasks that exceed the capabilities of simpler MCUs while retaining the deterministic interrupt response of a single-cycle instruction MCU. Key features include 60 MIPS (70 MHz) core performance, two 12-bit ADC modules with up to 16 channels, four analog comparators with op-amp support, multiple UART/SPI/I2C peripherals, five 16-bit timers, a charge time measurement unit (CTMU) for capacitive touch and current measurement, and a Peripheral Trigger Generator that coordinates peripheral timing without CPU intervention. The 512 KB Flash supports self-programming and live updates for field-deployed products, while 24 KB SRAM accommodates protocol stacks, audio buffers, or sensor fusion state. Typical applications include industrial motor control, multi-loop PID control systems, automotive body electronics and sensor fusion nodes, medical instrumentation signal chains, point-of-load converter digital controllers, and graphed HMI panels with capacitive touch. The wide operating temperature range (-40C to +125C) and AEC-Q100 grade designation make the part suitable for safety-conscious industrial and automotive designs. When designing with this part, allocate sufficient decoupling (100 nF ceramic + 10 uF bulk near each VDD/AVDD pair), respect the 64-VQFN thermal pad soldering profile (peak reflow 260C per JEDEC J-STD-020), and use Microchip's MPLAB X IDE with the XC16 compiler for code development. Production programming should use ICSP or the JTAG boundary-scan interface documented in the device datasheet family guide.

询价 联系我们
PIC24EP512GP206-E/PT - 16-bit 70 MIPS MCU, 512KB Flash | Microchip
PIC24EP512GP206-E/PT

PIC24EP512GP206-E/PT - 16-bit 70 MIPS MCU, 512KB Flash | Microchip

The Microchip PIC24EP512GP206-E/PT is a 16-bit microcontroller from the PIC® 24EP family, built around the high-performance 70 MIPS dsPIC/PIC24E core and housed in a 64-pin TQFP (10x10 mm) package. It integrates 512 KB of Flash program memory (170K x 24 words), 48 KB of SRAM, and operates from a 3.0 V to 3.6 V supply. The -E suffix denotes the extended industrial temperature grade (-40 °C to +125 °C) and AEC-Q100 Grade 1 qualification for automotive applications. A 16-bit microcontroller (MCU) is a programmable processor that combines a CPU, memory, and peripherals on a single silicon die, delivering higher arithmetic precision and code density than 8-bit MCUs while retaining low power consumption. Within the broader semiconductor hierarchy, MCUs sit inside the embedded systems class, alongside DSPs, FPGAs, and microprocessors; the PIC24EP family specifically targets motor control, digital power conversion, and high-end general-purpose applications. Key features include a 12-bit, 10 Msps ADC with up to 16 channels, a 10-bit DAC, four op-amps and three comparators on-chip, a Charge Time Measurement Unit (CTMU), a Peripheral Trigger Generator (PTG), and four pairs of high-speed PWM channels suitable for digital power and motor-drive topologies. Communication peripherals include USB 2.0 full-speed/OTG, two CAN 2.0B modules, four UART/SPI/I2C modules, and parallel master port (PMP) graphics support. The architecture combines a Harvard-bus 16-bit core with DSP-class instructions (single-cycle MAC) and dual partition Flash with live update, enabling field firmware upgrades without downtime. The integrated op-amps reduce external BOM in current-sensing designs, while the PTG peripheral chain automates ADC, PWM, and DMA triggers without CPU intervention for deterministic loop control. Typical applications span automotive body and sensor ECUs, BLDC/PMSM motor controllers, digital switched-mode power supplies, industrial sensor hubs, and USB-CAN gateways. The AEC-Q100 Grade 1 qualification makes it suitable for under-hood and chassis electronics where -40 °C to +125 °C operation is mandatory. When designing with this device, observe the VDD/VSS decoupling scheme specified in the datasheet (typically 0.1 µF + bulk caps on each VDD pin) and confirm the PWM-to-ADC synchronization timing before committing to a layout. The PTG peripheral can offload deterministic tasks from the core, but only when triggers are mapped correctly. This page synthesizes distributor pricing, AEC-Q100-aware drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet's typical application circuits.

询价 联系我们
PIC24EP512GP206-H/MR - 60 MIPS 16-bit MCU 512KB Flash | Microchip
PIC24EP512GP206-H/MR

PIC24EP512GP206-H/MR - 60 MIPS 16-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC24EP512GP206-H/MR is a 16-bit microcontroller from the PIC24EP family, delivering 60 MIPS performance with 512 KB Flash and 48 KB SRAM in a 64-pin VQFN (9x9 mm) package. The 'H' temperature grade extends operation to -40C to +150C for high-temperature environments, while the 'MR' suffix identifies the QFN package and reel packaging. A 16-bit MCU (microcontroller unit) is a single-chip computer containing a CPU core, program memory (Flash), working memory (RAM), and integrated peripherals such as ADCs, timers, and communication interfaces. The PIC24E architecture used in this device sits in Microchip's dsPIC/PIC24 line, providing higher performance than 8-bit PIC MCUs while retaining deterministic interrupt behavior and a C-friendly instruction set aimed at real-time control. Key features of the PIC24EP512GP206 include a 70 MIPS enhanced core (60 MIPS at 150C), up to 512 KB self-programmable Flash, 48 KB SRAM, integrated op amps, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG). The device integrates a 10/12-bit ADC with up to 16 channels, multiple UART/SPI/I2C interfaces, and PWM outputs suitable for motor control and digital power conversion. The PIC24E core uses a 16-bit modified Harvard architecture with a 24-bit instruction word, enabling compact code density and predictable execution. Internal PLLs drive the 60 MIPS throughput from an external crystal or internal FRC, and the on-chip op amps can condition sensor signals without external amplification stages. The CTMU allows capacitive touch and precise time-of-flight measurements, while the PTG chains peripheral events for automated sequencing without CPU intervention. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital power conversion (PFC, LLC, full-bridge converters), automotive sensor interfaces, factory automation PLCs, building HVAC controls, and medical instrumentation requiring extended temperature operation. The combination of op amps, ADC, CTMU, and PTG reduces external component count in mixed-signal designs. When designing with this part, ensure the 64-VQFN package has adequate PCB thermal copper under the exposed pad, and validate the operating temperature grade (H = -40C to +150C) matches your application profile. JTAG/ICSP programming requires proper signal isolation from high-current switching nodes. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and design notes that complement the manufacturer datasheet, helping engineers select and qualify the PIC24EP512GP206-H/MR efficiently.

询价 联系我们
PIC24EP512GP206T-E/MR - 60 MIPS 512KB Flash 16-bit MCU | Microchip
PIC24EP512GP206T-E/MR

PIC24EP512GP206T-E/MR - 60 MIPS 512KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24EP512GP206T-E/MR is a 16-bit microcontroller from the PIC24E high-performance general-purpose family, delivering 60 MIPS (Million Instructions Per Second) through a modified Harvard architecture core. It integrates 512 KB of Flash program memory (170K x 24 organization) and 48 KB of RAM (24K x 16), packaged in a 64-pin VQFN (9x9 mm) with an exposed thermal pad for improved heat dissipation. The device operates from 3.0 V to 3.6 V, making it a true 3.3 V system-on-chip for industrial and AEC-Q100 qualified automotive applications. A 16-bit microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals (ADC, PWM, timers, communication interfaces) onto a single silicon die. Within the MCU taxonomy, the PIC24EP sits as a 16-bit general-purpose device - above 8-bit PIC16/PIC18 in performance and DSP capability but below 32-bit PIC32 in raw throughput. The 16-bit data path enables efficient C-compiled code for signal processing, motor control, and complex state machines. Key features include a 10-bit ADC with up to 16 channels, a 12-bit ADC option, dual analog comparators, operational amplifiers, a Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurement, a Peripheral Trigger Generator (PTG) for hardware-level peripheral sequencing, DMA controllers, and high-speed PWM modules suitable for power conversion and motor drive. The AEC-Q100 qualification confirms its suitability for automotive environments. The PIC24EP512GP206T-E/MR uses a modified Harvard architecture with separate program and data buses, allowing simultaneous instruction fetch and data access. This design, combined with the 70 MIPS-capable core, gives superior code density and deterministic interrupt response critical for real-time control loops. Typical applications include industrial motor control (BLDC, PMSM, stepper), automotive body and chassis ECUs, power-conversion digital control, sensor fusion systems, and IoT edge nodes. The automotive temperature grade (E suffix) supports -40 C to +125 C operation. When designing with this part, allocate decoupling capacitors within 3 mm of every VDD/VSS pair, bond the exposed thermal pad to a continuous ground pour for thermal relief, and reserve the ICSP/PGECx/PGEDx pins for in-circuit programming and debugging. This page synthesizes distributor pricing, AEC-Q100 automotive drop-in alternatives, and practical PCB layout notes not found in the bare datasheet summary.

询价 联系我们
PIC24EP512GP206T-E/PT - 16-Bit 60MIPS 512KB Flash MCU | Microchip
PIC24EP512GP206T-E/PT

PIC24EP512GP206T-E/PT - 16-Bit 60MIPS 512KB Flash MCU | Microchip

The Microchip Technology PIC24EP512GP206T-E/PT is a 16-bit PIC microcontroller from the PIC® 24EP general-purpose family, featuring a 60 MIPS dsPIC30/dsPIC33-style CPU core, 512 KB Flash, 48 KB RAM, and integrated analog peripherals, housed in a 64-pin TQFP (10x10 mm) package. The PIC24EP512GP206T-E/PT supports operation from 3.0V to 3.6V (typical 3.3V), offers 60 MIPS performance, and is AEC-Q100 qualified for automotive applications. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), working memory (RAM), and a rich set of on-chip peripherals such as timers, ADCs, communication interfaces, and op-amps. Within the broader semiconductor hierarchy, an MCU sits below microprocessors in capability but above bare logic ICs in integration, and is the fundamental building block of nearly every embedded system. The PIC24EP family specifically belongs to the high-performance 16-bit tier, sitting between 8-bit PIC18/PIC16 parts and 32-bit PIC32MZ/PIC32MX devices. Key features of the PIC24EP512GP206T-E/PT include 512 KB of self-programmable Flash, 48 KB SRAM, three on-chip operational amplifiers, four analog comparators, a Charge Time Measurement Unit (CTMU), a Peripheral Trigger Generator (PTG) for hardware state-machine automation, and Peripheral Pin Select (PPS) for flexible peripheral-to-pin mapping. The device also integrates high-speed PWM, a 10-bit or 12-bit ADC (depending on variant), and communications peripherals including I2C, SPI, UART, IrDA, and LIN. Architecturally, the PIC24E core uses a modified Harvard architecture with separate program and data buses, a 16-bit instruction word, and a single-cycle hardware multiplier that enables DSP-class DSP (MAC) operations. The PTG peripheral allows designers to coordinate complex sequences of peripheral events without CPU intervention, reducing jitter and freeing the core for application-level processing. Typical applications include automotive body controllers and sensor interfaces, industrial motor control, digital power conversion, LED lighting controllers, medical instrumentation front-ends, and high-end consumer products requiring mixed-signal performance. The AEC-Q100 qualification also makes it directly usable in under-hood and cabin automotive electronics. When designing with this part, remember that the 'T' suffix denotes tape-and-reel packaging and the 'E' temperature grade denotes the extended industrial range of -40C to +125C, making the part suitable for harsh-environment deployment. The PTG and CTMU peripherals enable capacitive touch sensing and complex timing without external components, lowering BOM cost.

询价 联系我们
PIC24EP512GP206T-I/MR - 16-Bit 70MIPS MCU, 512KB Flash, 64-VQFN | Microchip
PIC24EP512GP206T-I/MR

PIC24EP512GP206T-I/MR - 16-Bit 70MIPS MCU, 512KB Flash, 64-VQFN | Microchip

The Microchip Technology PIC24EP512GP206T-I/MR is a 16-bit microcontroller from the PIC24EP "general purpose GP" family, delivering 70 MIPS of CPU performance and integrating 512 KB (170K x 24) of Flash program memory with 48 KB of SRAM in a 64-pin VQFN (9x9 mm) package. The "T" suffix indicates tape-and-reel packaging and "I" denotes the industrial -40C to +85C operating temperature range. The device is built around Microchip's high-speed 16-bit modified Harvard core with DSP extensions, paired with an enhanced 12-bit ADC, two op-amps, two comparators, a CTMU (Charge Time Measurement Unit) and the Peripheral Trigger Generator (PTG) sequencer for hardware-state-machine automation. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), volatile working memory (RAM), and a rich set of peripherals such as ADCs, timers, communication interfaces, and GPIO. The PIC24EP sits in the 16-bit MCU tier of Microchip's portfolio: above the 8-bit PIC16/PIC18 families and below the 32-bit PIC32MX/dsPIC33 families. Within that tier, GP parts target general-purpose control and signal conditioning, MC variants add motor-control PWMs, and S variants add security/encryption. PIC24EP MCUs are commonly used when applications need more code space, more RAM, and higher throughput than 8-bit parts, but do not require a full Cortex-M/PIC32 32-bit core. Key differentiators of the PIC24EP512GP206T-I/MR include the 70 MIPS / 60 MHz core, 4-channel hardware DMA, 32-bit wide data path to Flash, and the PTG peripheral that can sequence ADC, PWM, and I/O actions without CPU intervention. The 12-bit ADC runs up to 1.1 Msps with up to 4 sample-and-hold stages, and the integrated dual op-amps and dual analog comparators reduce external analog component count. The 64-VQFN (9x9) package exposes 53 GPIO pins, three 16-bit timers, two UART, two SPI, two I2C, an ECAN module and a parallel master port. Typical applications include industrial motor and pump control, multi-loop PID process controllers, sensor signal conditioning with on-chip op-amps, USB/HID human-interface devices, point-of-sale terminals, and advanced lighting or audio front-ends that demand DSP-class math. The PTG makes the part especially attractive for deterministic real-time control loops and sequencer-driven data acquisition. Designers should budget sufficient Flash/RAM for the application and provide a stable 3.3 V supply with adequate bulk decoupling; the VQFN-64 exposed pad must be soldered to the ground plane for thermal and electrical performance. When migrating to the larger GP806/GP810 pin-compatibles, the same firmware image typically runs unchanged, simplifying scalability. This page combines distributor pricing, drop-in alternatives in the same 64-VQFN footprint, and practical design notes not consolidated in the manufacturer datasheet.

询价 联系我们
PIC24EP512GP206T-I/PT - 16-bit 70 MIPS 512KB Flash MCU | Microchip
PIC24EP512GP206T-I/PT

PIC24EP512GP206T-I/PT - 16-bit 70 MIPS 512KB Flash MCU | Microchip

The Microchip Technology PIC24EP512GP206T-I/PT is a high-performance 16-bit PIC microcontroller built around the PIC24E core running at up to 70 MIPS (60 MIPS for this TQFP-64 device per data). It integrates 512 KB of Flash program memory (170K x 24) and 48 KB of SRAM, with a 64-pin TQFP (10x10 mm, PT) package suffix indicating tape-and-reel delivery. The part carries the /PT industrial temperature rating of -40C to +85C and the I (industrial) operating range, qualifying it for harsh-environment embedded systems. A microcontroller (MCU) is an integrated circuit combining a CPU core, program and data memory, peripherals, and I/O in a single chip. Within the broader taxonomy, the PIC24EP family belongs to 16-bit microcontrollers -> digital signal controllers (DSCs) -> embedded microcontrollers -> microprocessors and microcontrollers -> semiconductors. The 'EP' (Enhanced Performance) sub-family adds DSP instructions, hardware multipliers, and high-speed analog peripherals, positioning it between classic 8-bit PIC MCUs and 32-bit Cortex-M parts. Key features of this device include a 10/12-bit ADC with up to 1.1 Msps conversion rate, three analog comparators, two on-chip op-amps, a Charge Time Measurement Unit (CTMU) for capacitive touch and current measurement, a Peripheral Trigger Generator (PTG) for hardware-state-machine peripheral orchestration, and multiple PWM/SCCP/MCCP timer modules for motor and power-conversion control. The 70 MIPS core combined with 512 KB Flash and 48 KB SRAM enables complex application stacks including motor control, digital power, and multi-protocol industrial sensor hubs. Typical applications span industrial control (motor drives, PLCs, HVAC), automotive body and accessory ECUs, digital lighting and LED drivers, solar micro-inverters, and consumer audio/entertainment products. The wide industrial temperature range plus AEC-Q100 sibling (PIC24EP512GP206T-E/PT) makes the silicon tier attractive for both factory-floor and cabin-mounted designs. When designing with this MCU, confirm the JTAG/ICSP programming interface is exposed and that the 64-pin TQFP land pattern matches. Designers should budget ADC sample-and-hold acquisition time, allocate DMA channels carefully, and use the PTG to offload deterministic timing from the CPU. Use the identical-footprint PIC24EP256GP206 variant when memory headroom allows, or upgrade to PIC24EP512GP806 for USB/Ethernet integration. This page consolidates manufacturer datasheet excerpts, distributor pricing (DigiKey, Octopart), and a parametric comparison with same-package PIC24EP family drop-in alternatives not aggregated on the stock product page - enabling faster BOM decisions.

询价 联系我们
PIC24EP512GP806-E/MR - 16-bit 512KB Flash MCU 64-VQFN | Microchip
PIC24EP512GP806-E/MR

PIC24EP512GP806-E/MR - 16-bit 512KB Flash MCU 64-VQFN | Microchip

The Microchip Technology PIC24EP512GP806-E/MR is a 16-bit microcontroller from the PIC24E general-purpose family, offering 512 KB of Flash program memory, 53 KB of RAM, and a 60 MIPS enhanced CPU core, all packaged in a 64-pin VQFN (9x9 mm) with exposed thermal pad. The device integrates dual CAN 2.0 modules, USB 2.0 (full-speed), and a 12-bit ADC with up to 1.1 Msps sampling, targeting industrial and automotive embedded applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and configurable peripheral interfaces on one silicon die. Within the semiconductor taxonomy, an MCU sits below the System-on-Chip (SoC) level and is the central building block of embedded electronics. The PIC24EP series specifically targets high-performance 16-bit control with DSP-style instructions, making it well suited to motor control, digital power conversion, and real-time signal processing where 8-bit MCUs lack headroom but full 32-bit parts are overkill. Key features of the PIC24EP512GP806-E/MR include 512 KB (170K x 24) self-programmable Flash, 53 KB SRAM, hardware multipliers with single-cycle MAC, dedicated DMA for ADC and USB, and 122 general-purpose I/O pins routed to the package. The device supports an industrial operating range of -40C to +125C (the -E temperature grade covers -40C to +125C) and operates from a single 3.0 V to 3.6 V supply. AEC-Q100 qualification is mentioned by some distributors for the variant, making it usable in automotive dashboard, body, and powertrain-adjacent designs. Architecturally, the PIC24EP512GP806 family uses a modified Harvard core with a 24-bit instruction word, dual 40-bit accumulators, and a 17 x 17 hardware multiplier. Dual CAN, USB, and four UART/SPI/I2C options are multiplexed onto the 122 GPIO, giving engineers enough peripheral headroom to replace external bridge ICs in many designs. The integrated DMA further reduces CPU load for ADC and USB pipelines. Typical applications include CAN-connected industrial sensor nodes, USB human-interface devices, motor-control front ends, and automotive body controllers. The dual-CAN and USB combination makes it especially attractive in gateway or bridge designs that aggregate vehicle-network traffic and expose a diagnostic or configuration port. When designing with this part, pay close attention to the 64-VQFN (9x9) exposed-pad PCB footprint and ensure the thermal pad is soldered to a continuous ground plane for thermal and electrical performance. The -E temperature grade is rated for -40C to +125C; for automotive-grade lifetime reliability, verify the specific AEC-Q100 documentation from Microchip rather than relying solely on distributor listings. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer product page alone.

询价 联系我们
PIC24EP512GP806-E/PT - 70 MIPS 512KB Flash MCU TQFP-64 | Microchip
PIC24EP512GP806-E/PT

PIC24EP512GP806-E/PT - 70 MIPS 512KB Flash MCU TQFP-64 | Microchip

The Microchip PIC24EP512GP806-E/PT is a 16-bit microcontroller from the PIC24EP general-purpose family, delivering up to 70 MIPS core performance with 512 KB of Flash program memory and 52 KB of SRAM, packaged in a 64-pin TQFP (10x10 mm) and qualified for the extended -40C to +125C operating range. The device integrates dual CAN modules, USB 2.0 full-speed OTG, advanced analog peripherals, and an 8-bit parallel master port for graphic display interfacing. A 16-bit microcontroller (MCU) is a programmable processor that uses a 16-bit data path and instruction word, occupying a position between 8-bit MCUs and 32-bit MCUs in the embedded-processor hierarchy: 8-bit -> 16-bit -> 32-bit MCUs -> microprocessor units. PIC24EP devices are Digital Signal Controllers (DSCs), combining MCU control code density with DSP-class arithmetic capability in a single core, making them suitable for mixed control-and-signal-processing applications. Key features include 60 MIPS sustained performance at the -E temperature grade, dual Enhanced CAN (ECAN) modules supporting CAN 2.0B, a USB 2.0 On-The-Go peripheral, up to 122 general-purpose I/O pins, four 16-bit analog comparators, and a 10/12-bit ADC with up to 1.1 Msps conversion rate. The 64-pin TQFP package exposes 53 I/O pins with multiple communication peripherals including UART, SPI, I2C, and ECAN. An integrated 8 MHz internal oscillator with PLL provides flexible clocking options. The PIC24EP architecture uses a modified Harvard structure with separate program and data paths, plus a DSP engine that executes MAC operations in a single cycle. The 24-bit instruction word provides excellent code density while the 16-bit data path accelerates arithmetic. Multiple DMA channels (up to 15) and a dedicated crypto engine in some variants further enhance throughput for demanding real-time workloads. Typical applications include industrial automation and motor control, automotive body and chassis electronics, USB peripherals and HID-class devices, CAN-based networked sensors, medical instrumentation, and graphical user interfaces with TFT displays. The dual CAN interfaces make this part especially attractive for automotive gateway nodes and industrial fieldbus bridges. When designing with this MCU, pay close attention to the PGECx/PGEDx ICSP trace routing. Adding a small 20 pF capacitor between the PGEC line and VSS placed close to the chip improves programming reliability on this family. Always de-couple VDD/VSS with 100 nF ceramics and follow Microchip's recommended power-pin bulk capacitor layout. This page aggregates distributor pricing, drop-in same-package alternatives, and practical engineering notes not found in the standalone manufacturer datasheet, giving you an at-a-glance view of the part's value and substitute options.

询价 联系我们
PIC24EP512GP806-I/PT - 16-Bit 70 MIPS MCU 512KB Flash | Microchip
PIC24EP512GP806-I/PT

PIC24EP512GP806-I/PT - 16-Bit 70 MIPS MCU 512KB Flash | Microchip

The Microchip Technology PIC24EP512GP806-I/PT is a 16-bit microcontroller from the PIC24EP general-purpose family, delivering 70 MIPS core performance at 140 MHz with 512 KB Flash program memory and 52 KB SRAM, housed in a 64-pin TQFP (10x10 mm) industrial-grade package. The device integrates high-speed PWM, USB 2.0 FS OTG, dual CAN 2.0B controllers, and a 12-bit ADC with up to 500 ksps sampling rate for advanced analog and motor-control designs. What is a 16-bit MCU? A microcontroller unit is a single-chip computer that combines a processor core, non-volatile program memory, working SRAM, and programmable peripherals on one die. The PIC24EP sits in the 16-bit DSP-enhanced MCU category within Microchip's broader 8/16/32-bit product hierarchy, and is itself part of the high-performance PIC24EP subfamily optimised for motor control, digital power conversion, and advanced sensing. A 70 MIPS core means the device executes 70 million instructions per second, eliminating many external timing components while supporting deterministic DSP-class arithmetic. Key features of this part include 512 KB Flash organised as 170K x 24 instruction words, 52 KB SRAM, two UART, two SPI, two I2C peripherals, dual CAN 2.0B modules, a USB 2.0 full-speed OTG controller, and a 12-bit ADC with up to 24 input channels. The device supports a -40C to +85C industrial temperature range and offers up to 53 digital I/O pins plus a Parallel Master Port (PMP) for graphics or external memory interfacing, all within a 64-pin TQFP footprint that simplifies PCB layout for high-I/O designs. The PIC24EP core uses a modified Harvard architecture with 24-bit instruction words, a 16-bit data path, a DSP engine with single-cycle hardware multiplier, and deterministic interrupt response. The combination of dual CAN, USB-OTG, and high-resolution PWM makes this MCU well-suited to industrial automation backbones and automotive body-network gateways, where deterministic real-time communication is mandatory. Typical applications include industrial motor control (BLDC, PMSM, ACIM), HVAC fan and pump controllers, PLC modules, USB-to-CAN bridges, and medical instrumentation. The wide temperature range and dual CAN ports also suit automotive body-electronics and chassis subsystems requiring ruggedised connectivity. When designing with this part, take care to follow the device's recommended JTAG/ICSP programming layout because the PIC24EP family is sensitive to PGEC/PGED crosstalk - place a 20 pF capacitor close to the PGEC line. For CAN applications, an external transceiver such as the Microchip MCP2551 is required. Firmware development uses MPLAB X IDE with the Microchip XC16 compiler. This page synthesises verified distributor stock levels, drop-in PIC24EP-family alternatives, and practical application guidance not found in the manufacturer datasheet alone.

询价 联系我们
PIC24EP512GP806T-E/MR - 512KB Flash 16-bit MCU 60 MIPS | Microchip
PIC24EP512GP806T-E/MR

PIC24EP512GP806T-E/MR - 512KB Flash 16-bit MCU 60 MIPS | Microchip

The Microchip Technology PIC24EP512GP806T-E/MR is a high-performance 16-bit microcontroller from the PIC24EP family, integrating 512KB (170K x 24) of Flash program memory, 24K x 16 (52KB) of SRAM, and operating at up to 60 MIPS through a 3.3V supply. Housed in a 64-pin VQFN (9x9 mm) package with an exposed thermal pad, this automotive-grade (AEC-Q100) device combines Digital Signal Controller (DSC) capability with rich connectivity including USB, two CAN modules, DCI, PMP, and RTCC peripherals, alongside nine general-purpose timers. A 16-bit microcontroller (MCU) is a microprocessor-on-a-chip that executes instructions on 16-bit data widths, sitting in the hierarchy between 8-bit MCUs and 32-bit MCUs in terms of performance and code density. Digital Signal Controllers (DSCs) extend this concept by adding single-cycle MAC hardware and high-speed PWM, enabling real-time DSP operations like motor control and power conversion in the same silicon. The PIC24EP family is positioned as a high-performance general-purpose tier within Microchip's 16-bit portfolio, above the PIC24F/PIC24H families and below the dsPIC33 DSC family in computational throughput. Key features include 122 I/O pins on the larger package variants, internal oscillator support, and a Harvard architecture with separate program and data buses that allow simultaneous fetch and access. The PIC24EP512GP806T-E/MR specifically delivers 60 MIPS at 3.3V, distinguishing it from the 70 MIPS PIC24EP512GP806T-I/MR variant. Its wide peripheral set - 27 timers, multiple UART/SPI/I2C interfaces, two CAN modules, USB, and a 10/12-bit ADC - makes it suitable for complex embedded control systems. Architecturally, the PIC24EP512GP806T-E/MR uses a modified Harvard architecture with a 16-bit data path, 24-bit instruction width, and single-cycle hardware multiply, achieving 1.5 DMIPS/MHz. The integrated DSP engine provides single-cycle MAC operations essential for digital filter implementations in motor control and power-conversion feedback loops. The 512KB Flash supports self-programming, enabling in-field firmware updates. Typical applications include automotive body and chassis ECUs, industrial motor drives, UPS and power-conversion controllers, building automation gateways, and medical instrumentation requiring USB and CAN connectivity. The AEC-Q100 qualification extends its suitability to under-the-hood and safety-critical automotive subsystems. The wide peripheral mix also supports multi-protocol industrial sensors and IoT edge nodes with deterministic real-time response. When designing with this device, prioritize the VQFN exposed-pad thermal management strategy by stitching vias beneath the EP to the inner ground plane, since the device dissipates measurable power at 60 MIPS continuous operation. Reserve OSC1/OSC2 for an external crystal only when the internal oscillator's accuracy is insufficient for USB or CAN timing requirements. Plan for the two CAN modules and dedicated DMA channels to offload communication from the CPU. This page synthesizes distributor pricing, drop-in alternative listings, and practical design guidance not bundled in the manufacturer datasheet, helping engineers evaluate the PIC24EP512GP806T-E/MR against same-family and cross-family alternatives in a single view.

询价 联系我们
PIC24EP512GP806T-I/MR - 16-bit MCU 512KB Flash 64-VQFN | Microchip
PIC24EP512GP806T-I/MR

PIC24EP512GP806T-I/MR - 16-bit MCU 512KB Flash 64-VQFN | Microchip

The Microchip Technology PIC24EP512GP806T-I/MR is a 16-bit microcontroller from the PIC24EP family, integrating 512 KB of Flash program memory, 52 KB of SRAM, and a 70 MIPS high-performance core into a 64-pin VQFN (9x9 mm) package. The device features high-speed PWM, USB 2.0 full-speed OTG, advanced analog peripherals including a 1.2 Msps 12-bit ADC and 10-bit DAC, and multiple communication interfaces such as CAN, SPI, I2C, and UART. With 53 general purpose I/O pins and operation across -40C to +85C industrial temperature range, it targets real-time control and connected embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals on one IC. The PIC24EP family is built on Microchip's 16-bit modified Harvard architecture, providing deterministic instruction execution and low interrupt latency suitable for real-time control loops. Within Microchip's portfolio, PIC24 sits above PIC18 (8-bit) and below dsPIC33/PIC32 (DSC/32-bit), offering a balance of computational throughput, code density, and peripheral integration. The PIC24EP 'GP' sub-family specifically adds USB and enhanced analog, distinguishing it from the MC (motor control) variant. Key features of the PIC24EP512GP806T-I/MR include 70 MIPS core performance from a 70 MHz system clock, 512 KB Flash with self-programming support, 52 KB SRAM (24K x 16 bytes core plus 32K x 16 data buffer), up to 53 I/O pins with peripheral pin select (PPS) remapping, and a 12-bit ADC with up to 1.2 Msps conversion rate. The device integrates an on-chip 32 kHz to 8 MHz internal oscillator with PLL, reducing external BOM. Hardware assist tools include a real-time trace port, multiple DMA channels, and dedicated motor-control PWM with complementary outputs and fault input. Architecturally, the PIC24EP core uses a 16-bit data path with 24-bit instruction words, delivering approximately 1.5 DMIPS/MHz and 0.7 mA/MHz active current at 70 MIPS. The 64-VQFN (9x9 mm) package exposes a thermal pad for improved heat dissipation, and the device supports 3.0V to 3.6V single-supply operation. The high-speed USB OTG controller with integrated transceiver removes the need for an external PHY chip. Typical applications for the PIC24EP512GP806T-I/MR include industrial automation controllers, USB peripherals and Human Interface Devices (HID), motor control and inverter drives, medical monitoring instruments, and consumer audio/display products. The large Flash and SRAM make it well-suited for communication gateway designs that require concurrent USB and CAN stacks. When designing with this MCU, ensure the 64-VQFN thermal pad is soldered to a sufficiently large copper pour (typically four or more thermal vias to the inner ground plane) to meet the datasheet thermal specifications. The USB D+/D- traces must be length-matched within 2 mm and routed over a continuous ground plane to meet USB 2.0 full-speed signal integrity requirements. This page consolidates distributor pricing, drop-in alternatives, and practical design considerations drawn from the PIC24EP family datasheet, complementing the manufacturer documentation with practical engineering guidance.

询价 联系我们
PIC24EP512GP806T-I/PT - 16-Bit 70MIPS MCU 512KB Flash | Microchip
PIC24EP512GP806T-I/PT

PIC24EP512GP806T-I/PT - 16-Bit 70MIPS MCU 512KB Flash | Microchip

The Microchip Technology PIC24EP512GP806T-I/PT is a high-performance 16-bit microcontroller from the PIC24E general-purpose family, featuring a 70 MIPS dsPIC DSC core, 512 KB of Flash program memory and 52 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. Key features include 122 general-purpose I/O pins, a 12-bit ADC with up to 16 channels and 500 ksps conversion rate, USB 2.0 full-speed On-The-Go (OTG) interface, dual CAN 2.0B modules, and four UART/LIN/I2C/SPI configurable serial interfaces. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), working memory (RAM), and programmable peripherals (I/O, timers, communication controllers) onto a single die. Within the broader taxonomy, the PIC24EP sits between 8-bit MCUs (PIC16/PIC18) and 32-bit MCUs (PIC32) in Microchip's lineup, balancing performance and cost for general-purpose embedded designs. The PIC24E core adds Digital Signal Processing (DSP) instructions, which simplify closed-loop motor control and digital power-conversion algorithms. The PIC24EP512GP806T-I/PT supports an operating voltage range of 3.0 V to 3.6 V and an industrial temperature range of -40 C to +85 C. It integrates a 16-channel 12-bit ADC with dedicated Sample-and-Hold and 10-bit DAC outputs, four general-purpose 16-bit timers plus two input capture and two output compare modules, and a real-time clock with calendar (RTCC) capable of seconds-to-years counting with external 32.768 kHz crystal support. Typical applications include industrial motor control (BLDC, PMSM, AC induction), USB peripherals and Human Interface Devices (HID), CAN-connected automotive body controllers, and low-cost graphical displays driven through the Parallel Master Port (PMP). The combination of dual CAN, USB-OTG, and 16-bit PWM outputs is rare in this price class, making the part well-suited to mid-tier industrial and automotive ECUs. When designing with this MCU, always supply a stable 3.3 V rail (LDO or buck) within +/- 5 percent, place decoupling capacitors as close as possible to every VDD/VSS pair, and program the configuration bits during the first firmware load. For noise-critical analog sampling, route the analog VDD/VSS pins to a quiet supply plane isolated from the digital switching currents.

询价 联系我们
PIC24EP512GU810 - 70 MIPS 16-bit MCU, 512KB Flash, USB & Dual CAN
PIC24EP512GU810

PIC24EP512GU810 - 70 MIPS 16-bit MCU, 512KB Flash, USB & Dual CAN

The Microchip PIC24EP512GU810 is a high-performance 16-bit microcontroller from the PIC24E general-purpose family, featuring a 70 MIPS core, 512 KB of Flash program memory, and 52 KB of SRAM in a 100-pin TQFP package. It integrates a USB 2.0 full-speed OTG interface, two independent CAN modules, advanced 10/12-bit ADC, and a high-speed PWM peripheral suitable for digital power and motor-control applications. What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a rich set of on-chip peripherals such as ADC, timers, communication controllers, and GPIO. The 16-bit class sits between 8-bit MCUs (PIC16/PIC18) and 32-bit MCUs (Cortex-M), offering higher code density, larger linear addressing, and DSP-class arithmetic at moderate cost and power. Within Microchip's taxonomy, the PIC24E belongs to the dsPIC33/PIC24E DSC family, which combines microcontroller simplicity with select DSP capability for motor control, power conversion, and signal conditioning. The PIC24EP512GU810 specifically targets applications that need simultaneous USB device/host/OTG connectivity and dual CAN buses for industrial and automotive networking. Key differentiating features include 512 KB self-programmable Flash with ECC, 52 KB SRAM, 83 user GPIO, 27 general-purpose timers including nine 16-bit and four 32-bit, two CAN 2.0B modules, USB 2.0 FS OTG, a 12-bit 1.1 Msps ADC with up to 32 analog inputs, four analog comparators, and an Enhanced Parallel Master Port (EPMP) for off-chip memory or graphics displays. It also provides Peripheral Trigger Generator (PTG) and PWM time-base modules for digital-power topologies, and a Crypto engine with True Random Number Generator (TRNG). The 100-pin TQFP (12x12 mm) package exposes the full peripheral set and is the same footprint used by the companion dsPIC33EP512MU810 DSC, enabling code-compatible migration between MCU and DSC variants. The PIC24E CPU core is a modified Harvard architecture with a 16-bit data path, hardware stack, and instruction set optimized for C compiler code generation. It supports up to 70 MIPS at 70 MHz, has 24-bit instruction words, and includes a single-cycle MAC for basic DSP operations. The device operates from 3.0V to 3.6V, has five power modes for low-power operation, and supports industrial temperature grades (-40C to +85C for -I variants, -40C to +125C for -E extended variants). Typical applications include industrial automation controllers, CAN-based sensor networks, USB-CAN bridges, motor drives, solar inverters, and medical instrumentation. The dual CAN + USB combination is especially useful for industrial gateways where the MCU bridges USB hosts to CAN fieldbuses. When designing with this device, verify that the 3.3V rail is clean; the MCU's high-speed ADC is sensitive to supply noise. Add 100 nF + 10 uF decoupling close to each power pin and use a dedicated ferrite for the AVDD rail if the analog section is exercised. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

询价 联系我们
PIC24EP512GU810-E/BG - 60 MIPS 16-bit MCU 512KB Flash TFBGA-121
PIC24EP512GU810-E/BG

PIC24EP512GU810-E/BG - 60 MIPS 16-bit MCU 512KB Flash TFBGA-121

The Microchip Technology PIC24EP512GU810-E/BG is a high-performance 16-bit microcontroller from the PIC24EP family, delivering up to 70 MIPS core performance (60 MIPS at the 3.3V operating point) with 512 KB of Flash program memory and 52 KB of SRAM. Housed in a 121-pin TFBGA (BG) package at 10x10 mm, it is qualified to the AEC-Q100 automotive standard and integrates USB 2.0 Full-Speed/Hi-Speed OTG plus dual CAN 2.0B modules, eliminating the need for external communication ICs in connected-vehicle and industrial CAN-bus designs. A 16-bit MCU (microcontroller) is a single-chip computer that combines a CPU, Flash program memory, SRAM, peripherals (ADC, timers, communication controllers), and I/O on one silicon die. The PIC24EP512GU810 sits in the "enhanced performance" tier of Microchip's PIC24 line, positioned between baseline PIC24F and DSP-capable dsPIC33EP families. Its modified Harvard architecture with a wide 24-bit instruction word gives strong code density and deterministic interrupt latency, well-suited to motor control, USB-CAN bridging, and digital-power firmware. The device integrates a 32-channel 10-bit/12-bit ADC with up to 16 sample-and-hold inputs, multiple PWM channels with high-speed 7.14 ns resolution for digital-power and motor-control loops, a 15-channel DMA engine that offloads data movement from the core, and a Real-Time Clock and Calendar (RTCC) with backup domain. Its 3.3V core with 5V-tolerant I/O supports industrial 24V-bus powered systems after a simple LDO pre-regulation stage. The PIC24EP512GU810's 70 MIPS core, dual-CAN, and USB-OTG integration make it a strong fit for automotive gateway and body-control modules, industrial PLC communication interfaces, and USB-CAN bridge appliances. It is also deployed in medical patient-monitoring devices and aerospace flight-control subsystems where the AEC-Q100 grade and PIC24 peripheral stability matter. Designers should review the migration guide when choosing between PIC24EP variants: the -E/BG temperature grade spans -40C to +125C, while the -I/BG grade covers -40C to +85C for cost-sensitive industrial boards. Pin-compatibility across the 121-ball TFBGA footprint is restricted to PIC24EP512GU810, dsPIC33EP512MU810, and PIC24EP256GU810 in the same package. This page synthesizes Microchip datasheet parameters, distributor pricing, AEC-Q100 qualification status, and practical drop-in alternative guidance not found on the manufacturer product page.

询价 联系我们
PIC24EP512GU810-E/PT - 60 MIPS 16-bit MCU, 512KB Flash, USB/CAN | Microchip
PIC24EP512GU810-E/PT

PIC24EP512GU810-E/PT - 60 MIPS 16-bit MCU, 512KB Flash, USB/CAN | Microchip

The Microchip Technology PIC24EP512GU810-E/PT is a 16-bit microcontroller from the PIC24E family, featuring a 60 MIPS (70 MHz) CPU core, 512 KB Flash program memory, and 52 KB RAM, housed in a 100-pin TQFP (12x12 mm) package. It integrates full-speed USB 2.0, dual CAN modules, advanced analog peripherals, and 83 I/O pins, targeting industrial, automotive, and embedded-control designs requiring connectivity and signal processing in a single device. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and configurable peripherals on one die. The PIC24E family extends this concept with a 16-bit modified Harvard architecture that executes most instructions in one cycle; in the system hierarchy it sits between simple 8-bit MCUs and 32-bit ARM Cortex-M devices. This part specifically belongs to the PIC24E general-purpose sub-family known for high-throughput DSP-friendly math, USB, and CAN connectivity. Key features include 16-bit ADC with up to 12-bit conversion at 1.1 Msps, multiple 16-bit timers, nine 16-bit and eight 32-bit general-purpose timers for a total of 27 timer channels, PWM with high-resolution duty control, and dual ECAN modules compliant with CAN 2.0B. The device runs from 3.0V to 3.6V with on-chip LDO, supports -40C to +125C operating temperature, and is AEC-Q100 qualified for automotive applications. The PIC24EP512GU810 uses Microchip's 16-bit modified Harvard architecture with DSP extensions, deterministic interrupt latency, and a wide peripheral set, enabling the same chip to drive motor control loops, run a USB stack, and bridge to CAN networks. The large 512 KB Flash supports over-the-air (OTA) bootloaders and dual-image schemes, while the 52 KB RAM accommodates USB HID/CDC class stacks plus communications buffers without external memory expansion. Typical applications include industrial automation and motor control, automotive body and chassis ECUs, USB-CDC/HID peripherals, CAN-bridge gateways, and medical instrumentation. The wide I/O count makes it suitable for graphical HMI panels when paired with an external TFT controller. In each of these roles the part replaces a discrete MCU-plus-CAN/USB transceiver board with a single chip solution. Design tip: route the USB D+/D- lines as a 90-ohm differential pair and place the 48 MHz crystal within 5 mm of the OSCI/OSCO pins. For CAN, use a 120-ohm termination resistor and isolate the bus from noisy switching nodes. The on-chip LDO requires a 1 uF + 10 uF decoupling network on VDDCORE. This page synthesizes distributor pricing, same-brand drop-in alternatives, application notes, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, sourcing, and schematic-level decisions.

询价 联系我们
PIC24EP512GU810-I/PF - 16-Bit 70 MIPS MCU, USB, Dual CAN | Microchip
PIC24EP512GU810-I/PF

PIC24EP512GU810-I/PF - 16-Bit 70 MIPS MCU, USB, Dual CAN | Microchip

The Microchip PIC24EP512GU810-I/PF is a high-performance 16-bit microcontroller from the PIC24E family, delivering up to 70 MIPS throughput from a 140 MHz core while integrating 512 KB of Flash and 52 KB of SRAM in a 100-pin TQFP (14x14 mm) package. The industrial temperature grade (-40C to +85C) and 3.0-3.6 V single-supply operation suit it for embedded designs that require both computational headroom and rich connectivity peripherals. The -I/PF suffix indicates the industrial -40C to +85C operating range with a TQFP-100 package, and the part is supplied in tape-and-reel packaging for high-volume assembly. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a configurable set of peripherals on one silicon die. Within the embedded system hierarchy, the PIC24EP512GU810 belongs to the 16-bit MCU category, sitting between 8-bit MCUs (PIC16/PIC18) and 32-bit MCUs (PIC32). The 'PIC24E' family specifically targets digital signal control, motor control, and graphics user interface designs with its enhanced DSP engine and high-speed PWM peripherals, allowing it to bridge low-end 8-bit controllers and high-end 32-bit cores while retaining deterministic interrupt response. Key features of the PIC24EP512GU810 include a 12-bit ADC with up to 24 channels and 500 ksps conversion rate, dual CAN 2.0B modules, USB 2.0 OTG with integrated transceiver, 10/100 Ethernet MAC support, and nine 16-bit timers plus five 16-bit input capture and output compare modules. The 83 general-purpose I/O pins provide ample headroom for parallel display and keypad interfaces, while the dedicated Peripheral Pin Select (PPS) feature allows flexible remapping of digital peripherals to any I/O pin for layout simplification. The architecture combines a modified Harvard bus with a RISC instruction set, 16 working registers, and hardware multiply/divide, achieving 1.55 DMIPS/MHz. Internal oscillator options and a 4x PLL reduce external component count, while the on-chip 32 kHz low-power RC oscillator supports Real-Time Clock Calendar (RTCC) operation in sleep modes. Programmable CRC and a hardware crypto engine are integrated for data integrity and security in connected products. Typical applications include industrial automation controllers, automotive body and infotainment ECUs, USB peripherals and HID devices, CAN-based sensor networks, and human-machine interface (HMI) panels with TFT LCDs. The combination of USB OTG and dual CAN in a single 100-pin package is particularly attractive for gateway nodes bridging CAN vehicle networks to USB host devices. When designing with the PIC24EP512GU810, allocate decoupling capacitance close to every VDD/VSS pair and follow Microchip's TQFP-100 land pattern recommendations to maintain signal integrity on the high-speed ADC inputs. PGEC/PGD programming lines should be routed away from switching nodes to avoid programming crosstalk. This page synthesizes distributor pricing, drop-in replacement candidates, and practical design guidance not assembled in any single distributor listing, helping procurement engineers and firmware developers make faster BOM and sourcing decisions.

询价 联系我们
PIC24EP512GU810-I/PT - 16-bit 70 MIPS MCU, 512KB Flash, USB/CAN | Microchip
PIC24EP512GU810-I/PT

PIC24EP512GU810-I/PT - 16-bit 70 MIPS MCU, 512KB Flash, USB/CAN | Microchip

The Microchip Technology PIC24EP512GU810-I/PT is a 16-bit PIC24E general-purpose microcontroller delivering up to 70 MIPS performance from a 3.0V to 3.6V supply in a 100-pin TQFP (12x12 mm) package. It integrates 512 KB of Flash program memory, 52 KB of SRAM, USB 2.0 (OTG/Host/Device), and dual CAN controllers, targeting industrial, automotive and embedded-control designs that demand deterministic DSP-class signal processing alongside rich connectivity. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (SRAM), and a rich set of peripherals (timers, ADC, communication blocks, GPIO). PIC24E sits in the 16-bit MCU hierarchy: 8-bit (PIC10/12/16/18) -> 16-bit (PIC24F/24H/24E/dsPIC33) -> 32-bit (PIC32MX/SAM/GD32). Its modified Harvard architecture and 16-bit wide data path deliver higher throughput than 8-bit parts while keeping the deterministic interrupt model familiar to PIC users. Key features include a 70 MIPS core with DSP engine, 512 KB self-programmable Flash with ECC, 52 KB SRAM, an integrated 12-bit 1.1 Msps ADC with up to 32 analog inputs, four DMA channels, and the previously mentioned dual CAN 2.0B interfaces plus USB 2.0 On-The-Go. The Advanced Analog includes comparators and configurable logic cells, while 27 timers (nine 16-bit, eighteen 32-bit) cover capture/compare/PWM. The device is qualified to AEC-Q100 Grade 1/0 variants, supporting automotive ambient ranges of -40C to +125C depending on the speed grade. The 100-pin TQFP (PT) variant exposes 83 I/O lines, giving designers ample headroom for parallel buses, TFT displays, and external memory. The PT package provides a generous thermal pad area suitable for industrial and automotive environments; the alternate BG (121-ball BGA) variant supports space-constrained layouts but is not pin-compatible with PT.

询价 联系我们
PIC24EP512GU810T-I/PF - 16-bit 60 MIPS MCU, 512KB Flash, USB, CAN | Microchip TQFP-100
PIC24EP512GU810T-I/PF

PIC24EP512GU810T-I/PF - 16-bit 60 MIPS MCU, 512KB Flash, USB, CAN | Microchip TQFP-100

The Microchip Technology PIC24EP512GU810T-I/PF is a high-performance 16-bit PIC24E microcontroller built around a 70 MIPS modified-Harvard core, integrating 512 KB of Flash program memory, 52 KB of SRAM, and a USB 2.0 full-speed On-The-Go (OTG) controller in a 100-pin TQFP (14x14 mm) package. The device operates from a 3.0 V to 3.6 V supply at up to 60 MIPS and is qualified for the industrial -40C to +85C temperature range, with 83 general-purpose I/O pins, dual CAN 2.0B modules, four UART/USART blocks, two I2C, two SPI, IrDA, and LINbus peripherals. A microcontroller (MCU) is an integrated circuit that combines a CPU, non-volatile program memory (typically Flash), volatile working memory (SRAM), and a configurable set of on-chip peripherals behind a unified bus architecture. MCUs sit one level above digital signal controllers (DSCs) in the embedded-processing taxonomy: PIC24E general-purpose MCUs are optimized for control and connectivity tasks, while dsPIC33E DSCs in the same package family add a DSP engine for high-throughput signal conditioning. The PIC24EP512GU810 belongs to Microchip's PIC24 power-management-aware MCU family, which includes GP (general purpose), MC (motor control), and GU (USB + graphics) variants sharing the same peripheral library. Key features include a 32-channel 10/12-bit ADC with up to 1.1 Msps conversion rate, nine general-purpose 16-bit timers, nine Input Capture, nine Output Compare/Standard PWM, and additional dedicated High-Speed PWM with 7.14 ns resolution for digital power and motor control. The Peripheral Pin Select (PPS) remapping subsystem decouples peripheral signals from physical pins, simplifying PCB routing. A 15-channel DMA engine offloads data movement between peripherals and memory, freeing CPU cycles. An integrated hardware crypto engine, RTCC with calendar mode, and a parallel master port (PMP) for external graphics displays complete the integration. The PIC24EP512GU810 employs a 16-bit modified-Harvard architecture with separate program and data buses, single-cycle hardware multiply, hardware divide, and a 24-bit instruction word. The 512 KB Flash supports live update through dual-partition Flash partitioning, and the 52 KB SRAM is large enough to hold TCP/IP stacks, USB HID/CDC class drivers, or graphic framebuffers without external memory. The wide I/O count (83 GPIO) and dual CAN interfaces allow the device to serve as a central node in industrial networks, automotive body controllers, or USB-equipped point-of-sale terminals. Typical applications include industrial automation controllers, automotive infotainment and body-control modules, USB human-interface devices, barcode scanners and portable instrumentation, dual-CAN bridges, and battery-powered data loggers with USB charging. The combination of USB OTG and dual CAN makes it particularly attractive as a gateway between a USB host and a CAN-based vehicle or industrial bus. The industrial temperature grade allows deployment in factory-floor and outdoor enclosure designs. When designing with this part, note that the supply voltage range is 3.0 V to 3.6 V and that careful analog supply decoupling is required to achieve the rated ADC performance. PPS pin assignments must be locked early in firmware development because not all remappable functions are available on every pin, and the high-speed PWM and RTCC functions draw on dedicated oscillators that must be enabled via configuration bits. This page synthesizes distributor pricing, drop-in same-package alternatives drawn from the PIC24E family, and practical PCB/firmware design notes that go beyond the bare information shown on the manufacturer datasheet.

询价 联系我们