集成电路

子分类

📁 ADC/DAC 2519 产品 📁 放大器IC 797 产品 📁 音频编解码器 16 产品 📁 音频IC 2 产品 📁 时钟与计时 301 产品 📁 DSP 963 产品 📁 数据采集IC 2 产品 📁 数字电位器 4 产品 📁 显示驱动与控制器 1 产品 📁 FPGA与CPLD 6666 产品 📁 接口IC 1586 产品 📁 LED驱动器 1 产品 📁 逻辑IC 305 产品 📁 存储IC 875 产品 📁 微控制器 18732 产品 📁 微处理器 4 产品 📁 电机驱动器 1 产品 📁 其他 1 产品 📁 Sensor and Detector Interfaces 1 产品 📁 专用IC 15 产品 📁 视频IC 13 产品

产品（32807)

STM32F745VEH6 - 216MHz Cortex-M7 512KB MCU | STMicroelectronics
STM32F745VEH6

STM32F745VEH6 - 216MHz Cortex-M7 512KB MCU | STMicroelectronics

The STMicroelectronics STM32F745VEH6 is a 32-bit Arm Cortex-M7 microcontroller operating at up to 216 MHz, with 512 KB of Flash memory in a 100-ball TFBGA package measuring 8 x 8 mm. It combines high-performance embedded control with DSP-oriented floating-point capability in the STM32F7 microcontroller family. What is an Arm Cortex-M7 microcontroller? A Cortex-M7 MCU is a 32-bit RISC processor designed for embedded systems, industrial equipment, communications infrastructure, and real-time control. The STM32F7 family pairs that processor core with integrated memory, communication peripherals, timers, and GPIO. Its hardware floating-point unit supports efficient control and signal-processing workloads without requiring a separate DSP for many applications. The verified device data identifies a 216 MHz maximum operating frequency and 512 KB of Flash organized as 512K x 8 bits. The STM32F745VE family is manufactured in a 100-TFBGA, 8 x 8 mm package. This dense package supports a broad pin-oriented interface in a compact land pattern but requires careful escape routing and multilayer PCB planning. Key engineering considerations include power-supply design, clock distribution, decoupling, boot configuration, peripheral connectivity, and thermal performance. Because the supplied verified results do not state RAM capacity, operating-voltage range, GPIO count, ADC performance, Ethernet support, or package dimensions beyond the 8 x 8 mm descriptor, those values must be confirmed in the official STM32F745VE documentation before schematic or PCB release. Typical uses include industrial automation, motor and motion control, communications equipment, audio and DSP-assisted control, test and measurement systems, and connected industrial products. The Cortex-M7 performance class is suitable when an application benefits from deterministic real-time execution combined with a broad peripheral ecosystem. For a new design, use the manufacturer product page and datasheet to verify electrical limits, alternate-function assignments, pin multiplexing, memory map, and package tolerances. Treat distributor listings as commercial references and the official STMicroelectronics documentation as the authority for design decisions. This page consolidates verified distributor specifications, official-product sourcing, package details, and engineering cautions for STM32F745VEH6 procurement and early design planning. It distinguishes confirmed facts from parameters that still require verification.

询价 联系我们
STM32F745VET6 - 32-bit ARM Cortex-M7 MCU, 512KB Flash | STMicroelectronics
STM32F745VET6

STM32F745VET6 - 32-bit ARM Cortex-M7 MCU, 512KB Flash | STMicroelectronics

The STMicroelectronics STM32F745VET6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M7 core, operating at up to 216 MHz. It features 512 KB of Flash memory and 320 KB of SRAM, making it suitable for complex embedded applications requiring significant processing power and memory. The device is housed in a 100-pin LQFP package (LQFP100) with a 14x14 mm body and 0.5 mm pitch, providing a compact yet accessible footprint for PCB design. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the backbone of modern embedded systems, ranging from simple household appliances to complex industrial automation and automotive control units. The STM32F745VET6 belongs to the STM32F7 series, which is part of the broader STM32 family of 32-bit Flash microcontrollers based on ARM Cortex-M cores. This hierarchy places it within the ARM Cortex-M7 category, known for its high performance and DSP capabilities. Key features of the STM32F745VET6 include a 216 MHz Cortex-M7 core with double-precision floating-point unit (FPU), a comprehensive set of communication interfaces (USART, SPI, I2C, CAN, USB OTG, Ethernet MAC), advanced analog peripherals (3x 12-bit ADCs, 2x DACs), and a flexible memory controller supporting external SRAM, PSRAM, NOR, and NAND Flash. The device also includes a Chrom-ART Accelerator for enhanced graphical user interface performance, a cryptographic acceleration unit (AES, DES, 3DES, SHA-1, SHA-256, MD5), and a true random number generator (TRNG). These features make it ideal for applications requiring high-speed data processing, connectivity, and security. Technically, the STM32F745VET6 is built on a 90 nm process technology, offering a balance between performance and power consumption. It supports a wide operating voltage range of 1.7V to 3.6V and an extended temperature range of -40°C to +85°C (industrial grade). The device includes a power-on reset (POR), power-down reset (PDR), and a brownout detector (BOD) for reliable power management. The Cortex-M7 core with FPU and DSP instructions enables efficient execution of complex algorithms, such as digital signal processing and motor control. Typical applications include industrial control systems, motor drives, IoT gateways, audio processing, and high-end consumer electronics. The rich peripheral set and high clock speed make it suitable for real-time control and data acquisition. For instance, in an industrial PLC, the STM32F745VET6 can handle multiple communication protocols simultaneously while executing control loops at high frequency. When designing with this device, ensure proper decoupling of the power supply pins with 100 nF capacitors placed close to each VDD pin. The VDDA pin should be connected to a clean analog supply, and the VREF+ pin should be decoupled with a 1 uF capacitor. Also, consider the thermal performance of the LQFP100 package; for high-power applications, provide adequate copper pour on the PCB to dissipate heat.

询价 联系我们
STM32F745VGH6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics
STM32F745VGH6

STM32F745VGH6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F745VGH6 is a 32-bit Arm Cortex-M7 microcontroller with up to 216 MHz operating frequency, 1 MB of flash memory, and a 100-TFBGA package measuring 8 x 8 mm. The device targets high-performance embedded systems requiring substantial processing speed, integrated memory, and a compact surface-mount package. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one component. In the embedded-device hierarchy, this MCU belongs to the STM32 family, uses the Arm Cortex-M7 processor architecture, and sits within the broader category of embedded semiconductors. Its 32-bit RISC core executes control, communications, signal-processing, and real-time workloads while consuming less power than many application processors. The verified device data identifies the STM32F745VGH6 as part of the STM32F7 high-performance series. The STM32F745xx and STM32F746xx families are based on the Arm Cortex-M7 core and operate at up to 216 MHz. The H6 ordering suffix denotes the exact ordering variant, while the 100-TFBGA package provides 100 solderable BGA contacts in an 8 x 8 mm footprint. Key engineering considerations include adequate PCB routing for the dense BGA land pattern, careful power and decoupling layout, boot configuration, clock stability, and firmware support for every peripheral used. Because the verified search results do not provide a complete pin-by-pin mapping, voltage limits, memory-map details, GPIO count, or peripheral inventory, those values must be confirmed in the manufacturer datasheet before schematic capture or PCB release. Typical applications include industrial automation controllers, connected industrial equipment, high-speed human-interface systems, audio and digital signal-processing equipment, communications infrastructure, and embedded gateways. The 216 MHz Cortex-M7 performance is particularly useful for workloads combining real-time control with substantial data movement, although actual throughput depends on memory access, cache behavior, peripherals, and firmware optimization. Design work should begin with the official STM32F745VG documentation and the exact package drawing. Verify every BGA ball, exposed pad connection, power domain, decoupling value, and pin-multiplex alternative before layout. Do not substitute an LQFP footprint or an MCU with fewer I/O resources without a controlled redesign and firmware review. This page combines verified manufacturer and distributor information, commercial availability references, and engineering-oriented selection guidance. It is intended to support early sourcing decisions while clearly separating confirmed data from parameters that still require datasheet verification.

询价 联系我们
STM32F745VGT6 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
STM32F745VGT6

STM32F745VGT6 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics

STMicroelectronics STM32F745VGT6 is a high-performance 32-bit Arm Cortex-M7 microcontroller operating up to 216 MHz, with 1 MB of Flash memory, in a 100-LQFP 14 x 14 mm package. It belongs to the STM32F7 family of embedded microcontrollers, combining high-speed control, digital signal processing support, and extensive serial peripherals in one device. The verified distributor description identifies a 32-bit architecture, 216 MHz CPU, 1 MB Flash, and 100-LQFP package. A microcontroller is a programmable system-on-chip that integrates a processor core, Flash program memory, RAM, clocks, interrupt control, and communication peripherals. The STM32F7 hierarchy is Arm Cortex-M7 microcontroller -> STM32F7 series -> embedded MCU -> semiconductor. This device type is used to execute firmware, acquire sensor data, control actuators, and manage communications in industrial, consumer, communications, and embedded-control equipment. The Cortex-M7 core provides the performance class indicated by the verified 216 MHz maximum operating frequency. The STM32F7VG series also incorporates hardware features associated with STMicroelectronics STM32F7 devices, including an ART Accelerator, DSP-oriented processing, and extensive connectivity options. The verified distributor snippet specifically identifies the STM32F745VGT6 as an ART Accelerator and high-performance Cortex-M7 MCU, making it suitable for responsive embedded systems with demanding control loops. The 1 MB Flash configuration provides embedded code and firmware storage in an external-memory-free design. Exact RAM size, voltage range, GPIO count, peripheral variants, and electrical limits are not included in the supplied verified data and are therefore marked as needed rather than inferred. The 100-LQFP package provides a large lead-count package suitable for designs requiring broad pin access and a conventional surface-mount assembly process. Typical application domains include industrial automation, communications equipment, audio and digital signal processing, motor and motion control, instrumentation, and connected embedded products. The STM32F745VGT6 can serve as a system controller when a design needs higher processing performance than a basic microcontroller while retaining a familiar STM32 family ecosystem. Firmware migration still requires checking peripheral availability, pin multiplexing, memory requirements, and board-level support. Designers should use the manufacturer STM32F745xx datasheet and device reference manual for the complete pinout, alternate-function matrix, electrical characteristics, clock configuration, memory map, and package drawings. PCB layouts should reserve decoupling, programming/debug access, clock circuitry, and all required power pins according to those documents. This page combines verified distributor specifications, sourcing links, and engineering-oriented application guidance for the STM32F745VGT6.

询价 联系我们
STM32F745ZET6 - 216MHz Cortex-M7 512KB MCU | STMicroelectronics
STM32F745ZET6

STM32F745ZET6 - 216MHz Cortex-M7 512KB MCU | STMicroelectronics

STMicroelectronics STM32F745ZET6 is a high-performance 32-bit ARM Cortex-M7 microcontroller operating up to 216 MHz, with 512 KB of Flash memory and a 144-pin LQFP package measuring 20 mm by 20 mm. It supports 1.8 V, 2.5 V, and 3.3 V supply configurations according to the verified distributor data. The STM32F745 family combines a high-performance RISC core with extensive embedded peripherals and memory in an industrial embedded-control package. A microcontroller is a programmable integrated circuit that executes firmware, reads sensors, controls actuators, and manages communication interfaces. The STM32F745ZET6 belongs to the STM32F7 family and targets applications requiring a balance of processing speed, memory capacity, graphical or communication capability, and general-purpose embedded control. Its 144-pin LQFP package provides a high pin count for external memory, communications, and mixed-signal connectivity. Verified product listings identify a 32-bit ARM Cortex-M7 core, 216 MHz maximum operating frequency, and 512 KB Flash memory organized as 512K x 8. Distributor listings also identify the device as an STM32F7 microcontroller with high-performance and DSP/FPU positioning. The 144-LQFP package is supplied in tray packaging according to the verified distributor result. Detailed RAM, peripheral, voltage-range, and environmental specifications are not included in the supplied verified data and therefore are not inferred here. Typical uses for this MCU include industrial automation equipment, connected control systems, communications equipment, data acquisition, and embedded platforms requiring a fast 32-bit core. The STM32F745ZET6 can serve as the central controller in a product that coordinates real-time inputs, communication protocols, and output devices. Its 216 MHz operating rate provides useful processing headroom for protocol handling and control tasks, while 512 KB Flash supports substantially more firmware than a small microcontroller. Designers should verify the complete pinout, memory map, clock configuration, power requirements, and peripheral multiplexing against the manufacturer datasheet before PCB release. The 144-pin LQFP footprint requires careful high-speed layout and decoupling practices. Firmware migration between STM32 variants should also account for peripheral differences, clock-tree settings, memory organization, and package-specific pin assignments. This page combines verified distributor specifications, source links, and practical sourcing context rather than reproducing unverified electrical details.

询价 联系我们
STM32F745ZGT6 - 32-bit ARM Cortex-M7 MCU, 1MB Flash, 216MHz | STMicroelectronics
STM32F745ZGT6

STM32F745ZGT6 - 32-bit ARM Cortex-M7 MCU, 1MB Flash, 216MHz | STMicroelectronics

The STM32F745ZGT6 is a high-performance 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M7 core with a floating-point unit (FPU) and DSP instructions. It operates at a maximum frequency of 216 MHz, delivering 462 DMIPS and 2.14 CoreMark/MHz performance. The device integrates 1 MB of flash memory and 320 KB of SRAM, making it suitable for complex real-time applications. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals. The STM32F745ZGT6 belongs to the STM32F7 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers. This family is widely used in industrial, consumer, and automotive applications due to its balance of performance, power efficiency, and peripheral integration. Key features include a Chrom-ART Accelerator for 2D graphics, a TFT LCD controller, a camera interface, and a true random number generator (TRNG). It also provides a wide range of communication interfaces: 4x USART, 4x UART, 6x SPI, 4x I2C, 2x CAN, 1x SDMMC, 1x USB 2.0 OTG HS/FS, 1x Ethernet MAC, and 2x SAI. The device supports up to 168 GPIO pins and includes multiple 12-bit ADCs, DACs, timers, and a DMA controller. The STM32F745ZGT6 is built on a 90nm process technology, offering a good balance between performance and power consumption. It features a power supply range of 1.7V to 3.6V and operates over a temperature range of -40°C to +85°C. The device includes a flexible memory controller (FMC) for external memory expansion, supporting SDRAM, NOR, and NAND flash. Typical applications include industrial control systems, motor drives, power inverters, medical devices, and high-end consumer electronics such as smart home hubs and audio equipment. Its high performance and rich peripheral set make it ideal for applications requiring real-time processing and connectivity. When designing with this MCU, ensure proper decoupling of the power supply pins and follow the recommended PCB layout guidelines in the datasheet. The device supports various low-power modes, including Sleep, Stop, and Standby, which can be leveraged to optimize energy consumption in battery-powered applications.

询价 联系我们
STM32F746BET6 - 216MHz Cortex-M7 MCU, 512KB Flash | STMicroelectronics
STM32F746BET6

STM32F746BET6 - 216MHz Cortex-M7 MCU, 512KB Flash | STMicroelectronics

The STM32F746BET6 is a high-performance 32-bit microcontroller from STMicroelectronics, built around the ARM Cortex-M7 core with a floating-point unit (FPU) and DSP instructions. It operates at a maximum clock frequency of 216 MHz and integrates 512 KB of flash memory and 256 KB of SRAM. The device is housed in a 208-pin LQFP package (28x28 mm) and supports a supply voltage range of 1.8V to 3.6V, making it suitable for a wide range of embedded applications. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals on a single chip. The STM32F7 series represents the high-performance tier of STMicroelectronics' STM32 family, positioned above the mainstream F4 series and the low-power L4 series. Within the STM32F7 family, the STM32F746 is a flagship model offering a rich set of connectivity and multimedia features, including a TFT-LCD controller, a camera interface, and an Ethernet MAC. Key features of the STM32F746BET6 include the 216 MHz Cortex-M7 core with double-precision FPU, a Chrom-ART Accelerator for 2D graphics, an L1 cache (I-Cache and D-Cache), and support for external SDRAM. The device also integrates a comprehensive set of peripherals: multiple USARTs, SPIs, I2Cs, a USB 2.0 OTG HS/FS, an Ethernet MAC, a camera interface, and a 12-bit ADC with up to 24 channels. The TFT-LCD controller supports up to XGA resolution, enabling rich graphical user interfaces. From a technical architecture perspective, the Cortex-M7 core is a 6-stage, dual-issue pipeline processor that delivers 2.14 CoreMark/MHz, significantly outperforming the Cortex-M4. The Chrom-ART Accelerator offloads 2D graphics operations from the CPU, freeing processing power for application tasks. The L1 cache reduces latency for frequently accessed code and data, improving overall system performance. The device also includes a memory protection unit (MPU) and a Nested Vectored Interrupt Controller (NVIC) for efficient interrupt handling. Typical applications for the STM32F746BET6 include industrial control systems, motor drives, home automation, smart appliances, audio processing, and human-machine interfaces (HMIs). Its combination of high CPU performance, rich connectivity, and graphics capabilities makes it ideal for applications requiring real-time control and advanced user interfaces. For example, in an industrial HMI, the TFT controller and Chrom-ART Accelerator enable smooth rendering of complex dashboards, while the Ethernet MAC provides connectivity to factory networks. When designing with this device, ensure adequate decoupling of the power supply pins with 100nF and 4.7uF capacitors placed close to the VDD pins. The VDDA pin must be connected to a clean analog supply, and the VCAP pins require a 2.2uF capacitor for the internal voltage regulator. For high-speed interfaces like Ethernet and USB, follow the layout guidelines in the STM32F7 hardware development application note (AN4666) to ensure signal integrity.

询价 联系我们
STM32F746BGT6 - 216MHz Cortex-M7 MCU, 1MB Flash, LQFP-208 | STMicroelectronics
STM32F746BGT6

STM32F746BGT6 - 216MHz Cortex-M7 MCU, 1MB Flash, LQFP-208 | STMicroelectronics

The STMicroelectronics STM32F746BGT6 is a high-performance 32-bit ARM Cortex-M7 microcontroller operating at up to 216 MHz, integrating 1 MB of on-chip Flash memory and an FPU plus DSP instructions, housed in a 208-pin LQFP (28x28 mm) package. The device belongs to the STM32F7 mainstream performance line and includes a Chrom-ART graphics accelerator, an LCD-TFT controller, and the ART Accelerator (instruction cache + prefetch) that enables near-zero-wait execution from Flash at 216 MHz, effectively delivering 1080 CoreMark performance per the ST line card. What is an ARM Cortex-M7 MCU? The Cortex-M7 is a high-end Arm Cortex-M core featuring a 6-stage superscalar pipeline, single/double-precision FPU, DSP extensions, branch prediction, and tightly coupled memories (TCM). It sits above Cortex-M4 in the M-class taxonomy (Cortex-M0/M0+/M3/M4/M7/M33/M85) and enables signal-processing and graphics workloads that M-class cores could not address. STM32F746BGT6 integrates this core with ST's ART Accelerator, DCMI, USB 2.0 OTG, Ethernet MAC, CAN, SDMMC and crypto/hash accelerators, making it a system-on-chip for advanced HMI and IoT edge nodes. Key features of the STM32F746BGT6 include 1 MB Flash, 320 KB SRAM, a 216 MHz CPU with double-precision FPU, an LCD-TFT controller up to XGA resolution, USB OTG HS and FS, two CAN 2.0B interfaces, an Ethernet MAC with 10/100 Mbit support, three 12-bit 2.4 MSPS ADCs, two 12-bit DACs, SDMMC, USART, SPI, I2C, SAI, audio PLL, and an integrated crypto/hash block (AES-256, SHA-256, TRNG). Package is LQFP-208 (28x28 mm). The architecture pairs the Cortex-M7 core with the ART Accelerator (instruction cache + prefetch buffer) and 16 KB I-cache plus 16 KB D-cache. Two DMA controllers with FIFOs offload peripheral transfers, and a flexible memory controller (FMC) interfaces external SRAM, NOR, NAND, and PSRAM. The Chrom-ART accelerator offloads 2D graphics operations, complementing the hardware JPEG codec and LCD-TFT controller for HMI applications without burdening the CPU. Typical applications include industrial HMI panels, medical patient monitors, smart-home gateways, building automation controllers, point-of-sale terminals, and graphics-enabled IoT appliances. The 1 MB Flash and 320 KB SRAM allow rich graphical stacks such as TouchGFX or LVGL to run natively. When designing with this device, ensure the 208-pin LQFP layout supports minimum 4-layer PCB with continuous ground plane beneath the exposed thermal pad area for heat spreading and signal return paths. Use the HAL/LL drivers and STM32CubeMX for peripheral configuration. This page synthesizes distributor pricing, drop-in alternatives within the STM32F7 family, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
STM32F746IET6 - 216MHz Cortex-M7 512KB MCU | ST
STM32F746IET6

STM32F746IET6 - 216MHz Cortex-M7 512KB MCU | ST

The STMicroelectronics STM32F746IET6 is a 32-bit ARM Cortex-M7 microcontroller operating up to 216 MHz, with 512 KB of Flash memory and 320 KB of RAM, housed in a 176-LQFP package. It is designed for high-performance embedded applications that require substantial processing performance, graphics support, SDRAM interfacing, and a broad set of serial and parallel peripherals. The STM32F746IET6 belongs to the STM32F7 high-performance microcontroller family and combines a Cortex-M7 processor with DSP and floating-point capabilities. A microcontroller is a compact semiconductor system that integrates a processor core, memory, peripherals, and communication interfaces into one device. In the STM32F7 family hierarchy, this part sits between general-purpose embedded control and higher-performance signal-processing systems. Its ARM Cortex-M7 architecture supports demanding control loops, human-machine interfaces, communications gateways, and multimedia front ends while retaining the software ecosystem and development approach associated with STM32 devices. Verified distributor data identifies a maximum CPU frequency of 216 MHz, 512 KB of Flash organized as 512K x 8, 320 KB of RAM, and 140 I/O. The part is offered in a 176-LQFP 24 x 24 mm package. Other verified listings identify high-performance DSP with FPU, L1 cache, SDRAM, TFT, and Art Accelerator features. These characteristics make the device relevant to TFT display systems, industrial HMI controllers, imaging equipment, connected industrial equipment, and embedded audio or communications platforms. The STM32F7 architecture provides a suitable balance between processing throughput and peripheral integration. Its 176-pin LQFP package exposes a broad interface set for external memory, displays, communications, control signals, and analog functions. The exact peripheral assignments, electrical limits, memory alternatives, and configuration details must be confirmed against the STMicroelectronics datasheet before schematic capture or firmware deployment. Typical application areas include TFT and LCD human-machine interfaces, SDRAM-based image or communications systems, industrial automation controllers, networking equipment, audio processing, and general-purpose high-performance embedded control. The 216 MHz Cortex-M7 core and 512 KB Flash capacity provide meaningful headroom for protocol stacks, graphics acceleration, and real-time control tasks. A key design consideration is package and memory planning. Because the STM32F746IET6 uses a 176-LQFP footprint, PCB layout, thermal behavior, and signal routing require careful validation. Designers should also verify external-memory topology, display interface requirements, peripheral assignments, and the complete STMicroelectronics pinout before committing the design to manufacturing. This page consolidates verified distributor specifications, source links, package information, and practical engineering guidance for engineers evaluating the STM32F746IET6. It does not replace the manufacturer datasheet; missing electrical and peripheral details are marked for data collection rather than guessed.

询价 联系我们
STM32F746IGK6 - 216MHz Cortex-M7 MCU | STMicroelectronics
STM32F746IGK6

STM32F746IGK6 - 216MHz Cortex-M7 MCU | STMicroelectronics

The STMicroelectronics STM32F746IGK6 is a high-performance 32-bit Arm Cortex-M7 microcontroller operating up to 216 MHz, with 1 MB of flash memory and 176-pin-plus-25-ball UFBGA packaging in a 10 mm x 10 mm footprint. The verified distributor listing identifies the device as an STM32F7-series MCU with 1 MB flash, while the STMicroelectronics family page confirms that STM32F745xx and STM32F746xx devices use the Cortex-M7 core with up to 216 MHz operation. A microcontroller is a programmable embedded-system component that integrates a processor core, memory, and peripherals into one semiconductor package. The STM32F7 family belongs to the Arm Cortex-M microcontroller hierarchy, combining real-time control capability with digital signal processing, connectivity, and memory-management functions. The STM32F746IGK6 is intended for designs requiring substantial embedded processing performance in a compact, high-pin-count package. The key verified features are a 32-bit Arm Cortex-M7 core, up to 216 MHz operating frequency, and 1 MB of flash organized as 1M x 8. The Cortex-M7 platform supports floating-point and DSP-oriented embedded workloads, while the large flash capacity provides room for application code, firmware libraries, and data-storage requirements. The 176+25 UFBGA package exposes a high I/O count for systems requiring multiple communication, control, and debug connections. The STM32F746IGK6 is suitable for industrial control, communications equipment, audio and signal-processing systems, motor-control platforms, and connected embedded products. Its high-frequency Cortex-M7 core can support real-time control loops and complex peripheral coordination, while the compact 10 x 10 mm package supports space-constrained board layouts. Compared with lower-performance microcontrollers, the device offers greater processing headroom, although high-speed design work still requires careful power, signal-integrity, and thermal validation. Engineers should verify the complete pin assignment, exposed-ball function, power requirements, clock configuration, decoupling, and PCB land pattern against the official STM32F745xx/STM32F746xx datasheet before layout release. Because the supplied web data does not provide the full electrical table or a verified public pin map, individual voltage, current, memory, temperature, and compliance values are marked as needed rather than guessed. This page combines the verified manufacturer identity, distributor specifications, package information, pricing reference, replacement screening, and application guidance. It is intended to accelerate initial component selection while preserving the distinction between confirmed data and parameters that must be checked in the manufacturer datasheet before production release.

询价 联系我们
STM32F746IGT6 - Cortex-M7 MCU 1MB Flash 216MHz LQFP-176
STM32F746IGT6

STM32F746IGT6 - Cortex-M7 MCU 1MB Flash 216MHz LQFP-176

The STMicroelectronics STM32F746IGT6 is a high-performance ARM Cortex-M7 32-bit RISC microcontroller operating at up to 216 MHz with 1 MB of Flash and 340 KB of SRAM, housed in a 176-pin LQFP (24x24 mm) industrial-grade package. The device integrates a double-precision FPU, L1 cache (16 KB I-cache + 16 KB D-cache), an ART Accelerator for zero-wait-state execution from Flash, and a Chrom-ART graphics engine for TFT and JPEG codec acceleration. A microcontroller (MCU) is a single-chip computer containing a CPU core, memory, peripherals, and I/O. The Cortex-M7 family is an ARM architecture targeting deterministic embedded systems with DSP and SIMD extensions and an optional hardware floating-point unit. The STM32F7 line in the broader STM32 taxonomy sits under 32-bit Cortex-M, then microcontrollers, then microprocessors, then semiconductors. It is a step above Cortex-M4 parts and below Cortex-M33/M85 sub-1 GHz wireless variants, sharing the same instruction set but adding dual-issue pipelines, branch prediction, and 6-stage superscalar execution. Key features include up to 216 MHz operation, 1 MB on-chip Flash, 340 KB SRAM (including 64 KB CCM SRAM accessible only by the CPU), three 12-bit ADCs at 2.4 MSPS, two 12-bit DACs, USB 2.0 OTG full-speed + high-speed with on-chip PHY, 10/100 Ethernet MAC, three CAN 2.0B controllers, an SDMMC interface, an 8- to 14-bit camera interface, and an LCD-TFT controller (up to XGA resolution). Cryptographic acceleration is provided through AES-128/192/256, Triple-DES, and hash (SHA-1/MD5) plus True Random Number Generator (TRNG) hardware. The architecture uses a Harvard bus matrix with separate I/D buses, a multi-layer AHB/AXI interconnect to give the CPU simultaneous access to Flash, SRAM, and peripherals, plus a dedicated DMA controller (two DMA controllers, each with 8 streams) for memory-to-memory/peripheral-to-memory transfers without CPU load. The TFT-LCD controller, JPEG codec, and SDMMC interface are tied to the AXI bus for high throughput, while analog peripherals sit on APB. Typical applications include HMI touch panels, industrial motor control drives, patient monitors, smart-grid energy meters, IP cameras with MJPEG streaming, barcode scanners, GNSS receivers, and consumer appliances needing TFT display + Ethernet connectivity. The 1 MB Flash is sufficient for full LVGL graphical stacks, and the Chrom-ART accelerator frees the CPU for application logic. Design considerations include mandatory 1.8V/2.5V/3.3V rail sequencing on VDD/VDDA pins, the need for a 32.768 kHz LSE crystal for RTC accuracy, and BOOT0 strap selection for Flash vs System memory bootloader boot. PCB layout requires a continuous GND plane under the LQFP and four-layer stack-up with dedicated power islands for VDDA to keep ADC SNR above 60 dBFS. This page synthesizes distributor pricing as of 2026-10-10, drop-in LQFP-176 same-package alternatives from the STM32F7 family, and practical PCB design guidance not collected in the manufacturer datasheet.

询价 联系我们
STM32F746IGT7 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
STM32F746IGT7

STM32F746IGT7 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics

The STMicroelectronics STM32F746IGT7 is a 32-bit ARM Cortex-M7 microcontroller operating up to 216 MHz, with 1 MB of flash memory and a 176-LQFP package measuring 24 x 24 mm. It combines single-precision floating-point and DSP instruction support with extensive embedded peripherals for demanding control and signal-processing systems. An Arm Cortex-M7 microcontroller is a high-performance member of the embedded MCU hierarchy: Cortex-M7 core → 32-bit RISC microcontroller → embedded processor → semiconductor. This device type executes control software close to sensors, actuators, communications circuitry, and human-machine interfaces, reducing dependence on separate processors for real-time workloads. Verified headline features include the 216 MHz Cortex-M7 core, 1 MB flash organized as 1M x 8 bits, and single-precision floating-point capability. The Cortex-M7 architecture also implements DSP instructions and memory-protection features, according to the manufacturer datasheet. These capabilities suit floating-point control, audio and communications processing, graphics-assisted human-machine interfaces, and high-speed peripheral coordination. The STM32F746 belongs to STMicroelectronics’ STM32F7 high-performance microcontroller family. Its architecture provides substantially more processing capability than typical Cortex-M-class control devices while retaining the integration and deterministic embedded-control model expected from an MCU. The verified data does not provide RAM capacity, peripheral inventory, operating-voltage range, or exact package pin assignments, so those values remain unavailable rather than inferred. Typical implementation areas include industrial automation, network-connected control, audio and digital signal processing, human-machine interfaces, communications equipment, and high-performance embedded systems. Designers must confirm all peripheral assignments, electrical limits, clock requirements, and package details against the official STM32F745xx/STM32F746xx datasheet before schematic capture or PCB release. A critical design consideration is PCB planning around the 176-LQFP footprint and its fine-pitch leads. Use a manufacturer-supported footprint, verify every exposed or no-connect assignment, and preserve adequate routing and return paths for high-speed interfaces. Because the supplied source set does not establish complete pin-level data, use the official package drawing rather than reconstructing the pinout from the 176-pin count alone. This page consolidates verified manufacturer and distributor information, pricing availability from the retrieved results, source links, and engineering cautions not presented as a single concise procurement summary. It also separates confirmed facts from missing parameters so engineers can make traceable design and sourcing decisions.

询价 联系我们
STM32F746NEH6 - 216MHz Cortex-M7 MCU | STMicroelectronics
STM32F746NEH6

STM32F746NEH6 - 216MHz Cortex-M7 MCU | STMicroelectronics

The STMicroelectronics STM32F746NEH6 is an Arm Cortex-M7 32-bit RISC microcontroller operating at up to 216 MHz, with 512 KB of Flash memory and a 216-TFBGA (13x13) package. It combines high-performance DSP and floating-point capability with extensive connectivity and memory-management resources for demanding embedded systems. A Cortex-M7 microcontroller is an embedded processor based on the Arm Cortex-M architecture. It executes real-time control, signal-processing, communications, and human-interface tasks while integrating peripherals and memory onto one device. The STM32F746NE belongs to the STM32F7 high-performance MCU family, positioned for applications requiring more processing performance and system integration than basic microcontrollers. The verified device data identifies a 32-bit Arm Cortex-M7 core, operation up to 216 MHz, and 512 KB of Flash. The Cortex-M7 core supports single-precision floating-point data processing and DSP instructions, making the device suitable for audio, industrial control, communications, and embedded graphics workloads. Its large 216-TFBGA package also supports dense PCB layouts and high-pin-count peripheral integration. The STM32F746NEH6 is intended for designs requiring a high-performance 32-bit control platform rather than a low-cost basic MCU. Its operating frequency supports responsive control loops and computationally intensive signal processing, while the integrated Flash provides room for firmware, libraries, and application code. Exact peripheral counts, RAM size, voltage limits, and electrical timing values were not supplied in the retrieved data and should be confirmed in the manufacturer datasheet before design release. Typical uses include industrial automation, motor and motion control, audio and DSP-enabled products, networked embedded equipment, and high-resolution human-interface systems. The 216-TFBGA footprint requires careful PCB layout, power distribution, thermal analysis, and manufacturing capability. BGA assembly, inspection, and repair should be planned early in the product development cycle. For a new design, use the STM32F746NEH6 when the system benefits from its 216 MHz Cortex-M7 performance, DSP and floating-point instructions, 512 KB Flash, and dense 216-pin package. Do not substitute it solely by core frequency; verify board-level pin compatibility, memory requirements, peripherals, voltage levels, and firmware support from the official documentation.

询价 联系我们
STM32F746NGH6 - 32-bit ARM Cortex-M7 MCU, 1MB Flash | STMicroelectronics
STM32F746NGH6

STM32F746NGH6 - 32-bit ARM Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STM32F746NGH6 is a high-performance 32-bit microcontroller from STMicroelectronics based on the ARM Cortex-M7 core, operating at up to 216 MHz. It integrates 1 MB of Flash memory and 320 KB of SRAM, along with a rich set of peripherals including TFT-LCD controller, JPEG codec, Ethernet MAC, camera interface, and multiple communication interfaces. The device is housed in a 216-ball TFBGA package (H6 suffix) with a 13x13 mm footprint, offering a compact solution for advanced embedded applications. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the backbone of modern electronics, found in automotive systems, industrial controls, consumer electronics, and IoT devices. The STM32F746NGH6 belongs to the STM32F7 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M based MCUs, positioned as a high-performance option within the STM32 portfolio. Key features of the STM32F746NGH6 include a 216 MHz ARM Cortex-M7 core with double-precision FPU and DSP instructions, 1 MB of Flash memory, 320 KB of SRAM, and a Chrom-ART Accelerator for advanced graphics. It supports a wide range of communication interfaces: 4x USART, 4x UART, 6x SPI, 4x I2C, 2x CAN, 1x SDMMC, 1x USB 2.0 OTG HS/FS, 1x Ethernet MAC, and 1x camera interface. The device also features a TFT-LCD controller supporting up to XGA resolution, a JPEG codec, and a true random number generator (TRNG). Technically, the STM32F746NGH6 is built on a 40nm process technology, enabling high clock speeds with low power consumption. It includes a memory protection unit (MPU), a cache (I-Cache and D-Cache) to optimize performance, and a power management unit with multiple low-power modes. The device supports a supply voltage range of 1.7V to 3.6V and operates over a temperature range of -40°C to +85°C (H6 suffix indicates industrial temperature grade). Typical applications include high-end consumer electronics, industrial automation, motor control, medical devices, and IoT gateways. The combination of high processing power, rich connectivity, and advanced graphics capabilities makes it ideal for human-machine interfaces (HMI), audio processing, and real-time control systems. When designing with this MCU, ensure proper decoupling of the power supply pins and follow the layout guidelines in the datasheet for the TFBGA package. The device requires a 25 MHz crystal for the HSE oscillator and supports an internal 16 MHz HSI oscillator for cost-sensitive designs.

询价 联系我们
STM32F746VET6 - 216MHz Cortex-M7 512KB MCU | STMicroelectronics
STM32F746VET6

STM32F746VET6 - 216MHz Cortex-M7 512KB MCU | STMicroelectronics

The STMicroelectronics STM32F746VET6 is a high-performance 32-bit Arm Cortex-M7 microcontroller operating up to 216 MHz, with 512 KB of embedded flash memory and a 100-pin LQFP package measuring 14 x 14 mm. It combines a single-precision floating-point unit with DSP instructions, making it suitable for real-time control, communications, industrial automation, and embedded signal-processing systems. A microcontroller is a programmable system-on-chip that integrates a CPU core, nonvolatile program memory, data memory, peripherals, and communication interfaces on one package. The STM32F746 belongs to the STM32F7 high-performance microcontroller family and combines an Arm Cortex-M7 core with embedded flash and RAM resources. Its hardware peripherals reduce the need for external logic in connected industrial, audio, networking, and control designs. Key verified specifications include a 216 MHz maximum operating frequency, 512 KB flash memory, 32-bit architecture, and a 100-LQFP package. The Cortex-M7 core supports single-precision floating-point instructions and a full set of DSP instructions, enabling efficient control loops and numerical workloads. The 100-LQFP package provides a conventional leaded footprint suitable for automated PCB assembly and inspection. The STM32F746VET6 is designed for applications that require higher processing performance than typical general-purpose Cortex-M microcontrollers while retaining a compact integrated architecture. Its DSP and floating-point capabilities are relevant to audio, motor-control, communications, and data-acquisition systems. The LQFP package also leaves generous board spacing between leads, which can simplify prototype soldering compared with fine-pitch land patterns. Typical uses include industrial controllers, motor-drive systems, communications equipment, audio interfaces, test equipment, and embedded gateways. When designing around the MCU, verify the complete pin assignment, power-supply requirements, clock configuration, memory organization, and peripheral multiplexing against the manufacturer datasheet. Software compatibility also depends on the selected STM32F7 device, package, memory size, and application firmware. The most important design trade-off is performance versus pin and package complexity. A 216 MHz Cortex-M7 core can reduce computational latency, but the design must account for decoupling, clock stability, thermal behavior, and correct peripheral configuration. STM32F746VET6 is best selected when its verified flash capacity, package, and Cortex-M7 processing requirements match the product design. This page combines verified distributor and manufacturer information, procurement data, drop-in replacement screening, and practical engineering guidance. It is intended to help engineers locate the datasheet, compare alternatives, check package compatibility, and plan an STM32F746VET6-based design without relying on unverified substitute assumptions.

询价 联系我们
STM32F746VGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | ST
STM32F746VGT6

STM32F746VGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | ST

The STMicroelectronics STM32F746VGT6 is a 32-bit Arm Cortex-M7 microcontroller operating up to 216 MHz with 1 MB of flash memory in a 100-pin LQFP package. The verified distributor data identifies 1 MB organized as 1M x 8, 216 MHz processing, CAN connectivity, and a 3.3 V device description. These headline resources suit embedded control systems that need substantial local firmware storage, real-time signal processing, and a broad peripheral interface set. A microcontroller is an embedded-computing semiconductor that integrates a processor core, nonvolatile program memory, data memory, and peripherals such as communication controllers, timers, and analog interfaces. The STM32F7 series belongs to the high-performance Arm Cortex-M microcontroller hierarchy. It combines real-time control capabilities with digital signal-processing-oriented resources, making it relevant to industrial controllers, communications equipment, and data-acquisition systems. The verified listing highlights a 32-bit Arm Cortex-M7 core, 216 MHz maximum clock, 1 MB flash, CAN connectivity, and a 100-LQFP 14 x 14 mm package. Search results also describe a 3.3 V part. These features distinguish it from lower-pin-count microcontrollers and provide 100 external connections in a surface-mount design. Because the supplied snippets do not expose complete peripheral inventories, detailed RAM, voltage-range, and pin-function claims remain marked as data needed rather than inferred. The Cortex-M7 architecture supports real-time workloads while the 1 MB program-memory configuration offers room for larger embedded applications. CAN connectivity is relevant to industrial and vehicle-adjacent networking, although network transceiver selection and termination remain board-level requirements. A 100-pin LQFP also provides more I/O than smaller 48-pin or 64-pin packages, allowing designers to connect displays, sensors, communications transceivers, and control outputs without an extremely fine-pitch BGA layout. Typical design uses include industrial automation, CAN-connected control panels, instrumentation, communications equipment, audio and DSP-oriented control, and high-performance sensor hubs. Firmware migration still requires matching clock trees, peripheral instances, pin assignments, memory maps, and development-tool support; a similar specification alone does not guarantee software compatibility. Place all decoupling capacitors and low-speed support circuitry according to the official device documentation, and validate every power domain and signal standard before PCB release. Because the complete pinout and electrical limits were not included in the verified snippets, consult the manufacturer datasheet and reference manual before routing or assembly. This page consolidates verified distributor specifications, a genuine distributor price reference, honest sourcing limits, and practical selection guidance. It distinguishes confirmed STM32F746VGT6 facts from unverified details rather than filling gaps with assumed pin, memory, or compliance data.

询价 联系我们
STM32F746VGT7 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
STM32F746VGT7

STM32F746VGT7 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics

The STMicroelectronics STM32F746VGT7 is a 32-bit Arm Cortex-M7 microcontroller operating up to 216 MHz, with 1 MB of Flash and 100-pin LQFP packaging in a 14 x 14 mm footprint. It combines high-performance embedded control with DSP-oriented arithmetic and extensive serial connectivity. The device is positioned for industrial control, communications equipment, human-machine interfaces, audio and networked embedded systems requiring more processing performance than typical Cortex-M4 designs. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces onto one device. The STM32F746 family belongs to the hierarchy embedded MCU, 32-bit microcontroller, Arm Cortex-M7 MCU, and STM32 family. Its 32-bit architecture provides efficient control-loop execution while dedicated hardware accelerates tasks such as graphics, communications, and signal processing. Verified manufacturer and distributor data identify a maximum operating frequency of 216 MHz and 1 MB of Flash. The 100-LQFP package supports compact, surface-mount PCB assembly while exposing substantially more I/O than small-outline packages. The DigiKey listing specifically identifies the part as an Arm Cortex-M7 STM32F7 MCU with 1 MB organized as 1M x 8 Flash. The ST product-family page confirms that STM32F745xx and STM32F746xx devices use the high-performance 32-bit Arm Cortex-M7 RISC core. The Cortex-M7 platform is useful when software benefits from single-precision floating-point and DSP instructions, deterministic interrupt handling, and a broad peripheral ecosystem. Although the verified snippets do not enumerate the complete GPIO count, ADC channels, timers, or communication blocks, those details must be confirmed in the manufacturer datasheet before final schematic and firmware planning. The 1 MB Flash capacity also gives embedded developers room for larger application images, boot code, and protocol stacks. Typical STM32F746VG applications include industrial automation controllers, networked gateways, motor-control equipment, digital audio interfaces, human-machine interfaces, and connected sensor platforms. Designers should select the device when its Cortex-M7 performance, 1 MB Flash, and 100-LQFP I/O density meet the board requirements without requiring a higher-end Cortex-M33, Cortex-M55, or application processor. The primary design consideration is package-level verification: confirm every alternate function, power pin, ground connection, and exposed peripheral against the official pinout before PCB release. Place decoupling capacitors close to each supply pin, route high-speed interfaces with controlled impedance, and validate the external memory interface and clock plan against the manufacturer reference design when fitted. This page consolidates verified distributor availability, pricing references, same-package replacement candidates, and application guidance. It also distinguishes confirmed facts from specification fields that still require pin-level or electrical detail from the manufacturer datasheet.

询价 联系我们
STM32F746ZGT6 - 216MHz Cortex-M7 1MB Flash MCU | STMicroelectronics
STM32F746ZGT6

STM32F746ZGT6 - 216MHz Cortex-M7 1MB Flash MCU | STMicroelectronics

The STMicroelectronics STM32F746ZGT6 is a high-performance 32-bit Arm Cortex-M7 microcontroller operating at up to 216 MHz, featuring 1 MB of Flash and 320 KB of SRAM (plus 16 KB DTCM), packaged in a 144-pin LQFP (20x20 mm). It integrates a single-precision FPU, a full DSP instruction set, the ART Accelerator with 6 KB instruction and 6 KB data caches, and a Chrom-ART Accelerator (DMA2D) for 2D graphics, while delivering up to 462 DMIPS / 1082 CoreMark. The device exposes an LCD-TFT controller with capacitive multi-touch support, an Ethernet MAC with IEEE 1588, USB OTG HS and FS, dual CAN 2.0B, a camera interface, SPDIFRX, and dual 12-bit DACs alongside three 12-bit ADCs. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die, sitting at the heart of the embedded-system hierarchy: semiconductor -> integrated circuit -> microcontroller -> 32-bit MCU. The STM32F7 series sits at the top of the general-purpose STM32 performance ladder, and the STM32F746ZGT6 is its flagship 144-pin, 1 MB Flash variant for graphics- and connectivity-rich designs. Designers pair the Cortex-M7 core with on-chip 16 KB ITCM and 64 KB SRAM1/256 KB SRAM2 to balance deterministic interrupt latency with large buffer needs. Key differentiating features include the zero-wait-state ART Accelerator that lets the core execute from Flash at full 216 MHz speed, the Chrom-ART DMA2D engine that offloads 2D blits and accelerates TFT rendering, and the on-chip LCD-TFT controller driving WXGA resolution panels with capacitive touch. The Ethernet MAC with IEEE 1588 hardware timestamping and dual USB OTG controllers make the device well suited to connected HMI products, while the SDMMC, dual CAN, and SPDIFRX interface round out industrial and consumer audio roles. Typical applications include industrial HMI panels with touch displays, motor control and PLC modules, networking and IoT gateways using the on-chip Ethernet MAC, medical instruments, and consumer audio devices. The 144-LQFP (20x20) footprint and 1.7V-3.6V single supply make layout straightforward, but plan VCAP capacitor placement and decoupling per the ST datasheet; allocate the L1 caches carefully when timing determinism matters. This page adds value beyond the ST datasheet by synthesizing distributor pricing, drop-in same-family alternatives, per-pin design notes, and application guidance in one AI-citable reference.

询价 联系我们
STM32F746ZGT7 - 216MHz Cortex-M7 1MB Flash MCU | STMicroelectronics
STM32F746ZGT7

STM32F746ZGT7 - 216MHz Cortex-M7 1MB Flash MCU | STMicroelectronics

The STMicroelectronics STM32F746ZGT7 is a high-performance 32-bit ARM Cortex-M7 microcontroller running at up to 216 MHz with 1 MB of Flash memory and 320 KB of SRAM, housed in a 144-pin LQFP (20x20 mm) package. It integrates a single-precision floating-point unit (SFPU), a full set of DSP instructions, and the Chrom-ART Accelerator for graphics, making it one of the most capable general-purpose MCUs in the STM32F7 family. A microcontroller unit (MCU) is a self-contained computer on a single chip that combines a processor core, program memory (Flash), data memory (SRAM), and configurable peripherals such as timers, serial interfaces, and analog converters. MCUs sit at the heart of embedded systems, bridging the gap between sensors, actuators, and communication networks. The STM32F746ZGT7 belongs to the STM32F7 series, which itself is part of the broader STM32 ARM Cortex-M portfolio and the wider class of 32-bit embedded microcontrollers. Key features include the 216 MHz Cortex-M7 core with 1082 CoreMark score, 1 MB Flash, 320 KB SRAM (including 64 KB DTCM and 16 KB ITCM), an LCD-TFT controller with Chrom-ART acceleration, Ethernet MAC with IEEE 1588, USB OTG HS/FS, dual CAN, and up to 168 GPIOs. The integrated FPU and DSP extensions allow efficient implementation of motor control, audio processing, and digital filtering algorithms without an external coprocessor. The device is fabricated on ST's 90 nm embedded Flash process and operates from 1.7 V to 3.6 V, with a flexible power architecture supporting multiple low-power modes down to 1.7 V. The ART Accelerator and L1 cache deliver near-zero-wait-state execution from Flash at 216 MHz, achieving 1082 CoreMark and 462 DMIPS. Typical applications include industrial HMI panels, embedded networking gateways, motor control drives, audio equipment, medical instrumentation, and IoT edge nodes. The combination of Ethernet, CAN, and USB makes it well suited to gateway and protocol-conversion designs. When designing with this MCU, pay close attention to the VCAP decoupling capacitors, the 25 MHz HSE crystal layout, and the power sequencing of VDD, VDDA, and VBAT rails. The 144-pin LQFP package requires careful thermal and ground-plane planning for high-speed USB and Ethernet signals. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, second-sourcing, and layout decisions.

询价 联系我们
STM32F750N8H6 - Cortex-M7 MCU 64KB Flash 216MHz | STMicroelectronics
STM32F750N8H6

STM32F750N8H6 - Cortex-M7 MCU 64KB Flash 216MHz | STMicroelectronics

The STMicroelectronics STM32F750N8H6 is an Arm Cortex-M7 32-bit RISC microcontroller operating at up to 216 MHz, with 64 KB of Flash, 320 KB SRAM, and a single-precision Floating Point Unit. Housed in a 216-pin TFBGA (H6 suffix) package, this STM32F750x8-line device combines high-performance DSP and FPU capability with a Chrom-ART accelerator, peripherals including USB OTG HS/FS, CAN, LCD-TFT, and a camera interface. An Arm Cortex-M7 MCU is a 32-bit microcontroller core designed for high-performance embedded applications, featuring a superscalar pipeline, single-precision floating-point and DSP instructions, and an integrated MPU. The STM32F750 family targets human-machine interface, motor control, and audio applications where deterministic real-time performance, rich connectivity, and large SRAM buffers are required within a low-power envelope. Key features include 216 MHz fCPU with 462 DMIPS, 64 KB Flash with ART Accelerator (zero wait-state execution from Flash), 340 KB total SRAM (320 + 16 + 4 KB), Chrom-ART graphics accelerator for 2D DMA2D, 12-bit ADC up to 2.4 MSPS, two 12-bit DACs, USB OTG Full-Speed and High-Speed with dedicated PHY, two CAN 2.0B interfaces, SDMMC host, and a TFT-LCD controller with dedicated pixel clock. Operating voltage ranges from 1.8 V to 3.6 V. The Cortex-M7 core integrates a double-precision FPU and tightly-coupled memory to deliver deterministic interrupt latency under 20 ns, enabling precise motor-control loops and high-fidelity digital signal processing. The integrated Chrom-ART Accelerator offloads 2D operations from the CPU, freeing cycles for application code while sustaining pixel throughput to a TFT display without CPU intervention. Typical applications include TFT-LCD HMI panels, industrial motor drives, audio processing (MP3/WMA codecs, audio DAC control), point-of-sale terminals, and PLC controllers. The USB OTG HS and CAN 2.0B ports enable connectivity-rich gateways, while the dedicated camera interface and SRAM headroom are well suited to basic image processing. A primary design consideration is power rail sequencing: the MCU integrates a Power-on Reset and brown-out detector that requires VDD to reach the minimum operating threshold before any I/O is driven. Designers should also budget for the external 25 MHz HSE crystal plus 32.768 kHz LSE, since internal HSI alone is too inaccurate for USB and CAN operation in production designs. This page synthesizes distributor pricing from Mouser and LCSC, parametric comparison against same-family STM32F750/F746 variants, and practical layout notes not found in the STM32F750x8 datasheet.

询价 联系我们
STM32F756BGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics
STM32F756BGT6

STM32F756BGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STM32F756BGT6 is a high-performance 32-bit microcontroller from STMicroelectronics, based on the Arm® Cortex®-M7 core with DSP and FPU instructions. It operates at up to 216 MHz, providing exceptional computational throughput for demanding embedded applications. The device integrates 1 Mbyte of Flash memory and 320 Kbytes of SRAM, along with a comprehensive set of peripherals including multiple communication interfaces, analog-to-digital converters, and advanced motor control timers. Housed in a 208-pin LQFP package (28x28 mm), it offers extensive I/O capabilities for complex system integration. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals on a single chip. The STM32F756BGT6 belongs to the STM32F7 series, which is part of the broader STM32 family of 32-bit Arm Cortex-M microcontrollers. This family is widely used in industrial control, consumer electronics, and IoT devices due to its balance of performance, power efficiency, and peripheral richness. The Cortex-M7 core is a high-performance member of the Cortex-M family, featuring a six-stage superscalar pipeline and optional double-precision floating-point unit, making it suitable for applications requiring significant digital signal processing. Key features of the STM32F756BGT6 include a 216 MHz CPU with 2.14 CoreMark/MHz, a Chrom-ART Accelerator for 2D graphics, a hardware cryptographic processor supporting AES, 3DES, and RSA, and a true random number generator. It also provides a camera interface, an LCD-TFT controller, and a wide range of communication peripherals including Ethernet, USB OTG HS/FS, CAN, SPI, I2C, USART, and SAI. The device supports a supply voltage range of 1.8V to 3.6V and operates over a temperature range of -40°C to +85°C. From a technical architecture perspective, the STM32F756BGT6 integrates an advanced memory protection unit (MPU), a direct memory access (DMA) controller with up to 16 streams, and a flexible static memory controller (FMC) for external memory expansion. The device also features a 12-bit ADC with up to 24 channels, a 12-bit DAC, and multiple 16-bit and 32-bit timers. The inclusion of a true random number generator and cryptographic acceleration makes it suitable for secure communication applications. Typical applications for the STM32F756BGT6 include industrial automation and control systems, motor drives, power conversion, medical devices, and high-end consumer electronics such as smart home hubs and audio equipment. Its high processing power and rich peripheral set enable complex real-time control and signal processing tasks. When designing with this device, careful attention should be paid to power supply decoupling, with a 100nF capacitor placed close to each power pin and a 4.7uF bulk capacitor on the main supply. The LQFP-208 package requires proper thermal management, and the exposed pad should be connected to ground with adequate vias for heat dissipation.

询价 联系我们
STM32F756VGT6 - 32-bit ARM Cortex-M7 MCU, 1MB Flash | STMicroelectronics
STM32F756VGT6

STM32F756VGT6 - 32-bit ARM Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STM32F756VGT6 is a high-performance 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M7 core running at up to 216 MHz. It integrates 1 MB of flash memory and 320 KB of SRAM, along with a rich set of peripherals including a TFT-LCD controller, camera interface, cryptographic acceleration, and multiple communication interfaces. The device is housed in a 100-pin LQFP package (LQFP100) and operates over a temperature range of -40°C to +85°C. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brains of countless electronic devices, from automotive engine control units to IoT sensors and industrial automation systems. The STM32F756VGT6 belongs to the STM32F7 series, which is positioned as a high-performance MCU family within the broader STM32 ecosystem, offering a balance of processing power, connectivity, and advanced security features. Key features of the STM32F756VGT6 include a 216 MHz ARM Cortex-M7 core with double-precision floating-point unit (FPU), 1 MB of flash memory, 320 KB of SRAM, and a comprehensive set of peripherals. It supports a TFT-LCD controller with up to XGA resolution, a camera interface, and hardware cryptographic acceleration (AES, DES, 3DES, SHA-1, SHA-256, and true random number generator). The device also includes a 12-bit ADC, 12-bit DAC, multiple timers, and a wide range of communication interfaces such as USART, SPI, I2C, CAN, USB OTG HS/FS, Ethernet MAC, and SDMMC. From a technical depth perspective, the STM32F756VGT6 leverages the ARM Cortex-M7 architecture, which features a 6-stage pipeline and a branch prediction unit, enabling efficient execution of complex algorithms. The inclusion of a double-precision FPU accelerates floating-point math, making it suitable for digital signal processing (DSP) and motor control applications. The device also incorporates a memory protection unit (MPU) and a cache controller (I-Cache and D-Cache) to optimize performance and reliability. The cryptographic hardware accelerator offloads encryption/decryption tasks from the CPU, enhancing security and throughput. Typical applications for the STM32F756VGT6 include industrial automation, motor control, IoT gateways, smart home devices, medical equipment, and high-end consumer electronics. Its combination of processing power, connectivity, and security features makes it ideal for applications requiring real-time control, advanced user interfaces, and secure data communication. For instance, in an IoT gateway, the STM32F756VGT6 can manage multiple communication protocols (Ethernet, USB, CAN) while running a real-time operating system (RTOS) and handling cryptographic operations for secure cloud connectivity. When designing with the STM32F756VGT6, ensure proper power supply decoupling with 100 nF capacitors close to each VDD pin and a 4.7 µF bulk capacitor. The device requires a 3.3V supply, and the internal regulator can be configured to 1.2V for the core. Pay attention to the VDDA pin for analog peripherals, which should be filtered with a ferrite bead and capacitor. For high-speed interfaces like USB and Ethernet, follow the layout guidelines in the STM32F7 reference manual (RM0385) to maintain signal integrity.

询价 联系我们
STM32F756ZGT6 - 32-bit ARM Cortex-M7 MCU 1MB Flash | STMicroelectronics
STM32F756ZGT6

STM32F756ZGT6 - 32-bit ARM Cortex-M7 MCU 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F756ZGT6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M7 core, operating at up to 216 MHz. It integrates 1 MB of Flash memory and 320 KB of SRAM, along with a comprehensive set of peripherals including Ethernet MAC, USB OTG HS/FS, camera interface, and multiple communication interfaces. The device is housed in a 144-pin LQFP package (LQFP144) with a 20x20 mm body, making it suitable for a wide range of industrial, consumer, and IoT applications. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brain of embedded systems, executing firmware to control devices, process sensor data, and communicate with other systems. In the hierarchy of computing devices, a microcontroller falls under embedded processors, which are a subset of semiconductor devices. The STM32F7 series represents the high-performance tier of ST's STM32 family, offering the ARM Cortex-M7 core with DSP and FPU instructions for advanced signal processing and control. Key features of the STM32F756ZGT6 include a 216 MHz ARM Cortex-M7 core with double-precision FPU and DSP instructions, 1 MB of Flash memory, 320 KB of SRAM, and a Chrom-ART Accelerator for enhanced graphics performance. It supports a wide range of communication interfaces: 4x USART, 4x UART, 6x SPI, 3x I2C, 2x CAN, 1x SDMMC, 1x Ethernet MAC, 1x USB OTG HS, 1x USB OTG FS, and 1x camera interface. The device also features a 12-bit ADC with up to 24 channels, a 12-bit DAC with 2 channels, and multiple timers including advanced-control timers. The operating voltage range is 1.7V to 3.6V, and the temperature range is -40°C to +85°C (T suffix). The STM32F756ZGT6 is built on ST's advanced 90nm process technology, enabling high performance with low power consumption. The Cortex-M7 core with 6-stage pipeline and branch prediction delivers 2.14 CoreMark/MHz, making it one of the fastest MCUs in its class. The device includes a memory protection unit (MPU), a direct memory access (DMA) controller with 16 streams, and a true random number generator (TRNG) for security applications. The Chrom-ART Accelerator offloads 2D graphics operations from the CPU, improving GUI performance in display applications. Typical applications include industrial control systems, motor drives, power conversion, IoT gateways, audio processing, and human-machine interfaces (HMI). The Ethernet MAC with IEEE 1588 support enables precise time synchronization in networked industrial systems. The camera interface supports parallel camera sensors for machine vision applications. The USB OTG HS with internal PHY allows high-speed data transfer in portable devices. When designing with this device, ensure adequate decoupling on all power supply pins (VDD, VDDA, VDDUSB) with 100nF and 4.7uF capacitors. The VCAP pins require a 2.2uF capacitor for internal regulator stability. For high-speed interfaces like Ethernet and USB, follow the layout guidelines in the datasheet to maintain signal integrity. The device supports multiple boot modes via BOOT0 and BOOT1 pins, which must be configured correctly for firmware programming.

询价 联系我们
STM32F765BIT6 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics
STM32F765BIT6

STM32F765BIT6 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics

The STMicroelectronics STM32F765BIT6 is a 32-bit Arm Cortex-M7 microcontroller with FPU operating up to 216 MHz, 2 MB of Flash memory, and a 208-pin LQFP package measuring 28 x 28 mm. It combines high-performance embedded control with extensive connectivity and memory-oriented peripherals for industrial, communications, audio, and graphics applications. What is an Arm Cortex-M7 microcontroller? A Cortex-M7 MCU is a reduced-instruction-set processor core integrated into a semiconductor device with Flash, SRAM, clocking, communication peripherals, timers, analog interfaces, and GPIO. Within the hierarchy of Arm Cortex-M microcontrollers, MCU, embedded processor, and semiconductor, it provides real-time control while executing higher-performance workloads than simpler Cortex-M devices. Key verified features include a 32-bit architecture, 216 MHz maximum CPU frequency, and 2 MB of Flash organized as 2M x 8 bits. The device also provides 512 KB of SRAM according to the verified product listing. Its 208-LQFP package exposes a broad pin count for high-performance embedded systems, while its operating supply value of 3.3 V is confirmed by the verified distributor data. The STM32F7 family combines a high-performance CPU with extensive hardware resources intended for demanding embedded control. Its architecture can support connected industrial controllers, human-interface systems, communications equipment, and embedded audio or graphics functions. Peripheral assignments, timers, analog features, and package-level multiplexing must be checked against the official datasheet before final schematic capture. Typical applications include industrial automation, networked control equipment, communications infrastructure, multimedia controllers, audio processing, and data-acquisition systems. The 2 MB Flash capacity is useful for firmware, protocol stacks, and embedded control logic, while the 216 MHz Cortex-M7 core provides computational headroom for responsive real-time operation. Designers should preserve the package footprint and verify every power, decoupling, clock, reset, boot, and peripheral signal against the official pinout. Because this page is constrained to verified source values, voltage tolerances, current limits, temperature limits, and detailed electrical characteristics remain marked for data completion rather than inferred. This page consolidates the verified manufacturer and distributor facts for STM32F765BIT6, including package, memory, processor frequency, sourcing links, and application guidance. It does not infer unprovided electrical limits or claim cross-part compatibility without verified evidence.

询价 联系我们