集成电路

子分类

📁 ADC/DAC 3,100+ 产品 📁 放大器IC 1,900+ 产品 📁 音频编解码器 18 产品 📁 音频IC 2 产品 📁 时钟与计时 670+ 产品 📁 Comparator ICs 1 产品 📁 DSP 1,100+ 产品 📁 数据采集IC 2 产品 📁 数字电位器 4 产品 📁 显示驱动与控制器 1 产品 📁 FPGA与CPLD 7,300+ 产品 📁 接口IC 3,400+ 产品 📁 LED驱动器 1 产品 📁 逻辑IC 460+ 产品 📁 存储IC 870+ 产品 📁 微控制器 20,000+ 产品 📁 微处理器 4 产品 📁 电机驱动器 1 产品 📁 其他 1 产品 📁 Sensor and Detector Interfaces 1 产品 📁 专用IC 15 产品 📁 视频IC 14 产品

产品（39,000+)

Z86E0812PEG - 8-Bit 12MHz OTP Microcontroller | Zilog
Z86E0812PEG

Z86E0812PEG - 8-Bit 12MHz OTP Microcontroller | Zilog

Zilog Z86E0812PEG is an 8-bit Z8 microcontroller operating at up to 12 MHz, with 2 KB of one-time-programmable memory, 14 I/O ports, a 4.5 V to 5.5 V supply range, and an 18-pin PDIP package. It is designed for compact embedded-control systems requiring straightforward 8-bit processing, dedicated I/O, and firmware retention without a separate external memory device. An 8-bit microcontroller is a programmable semiconductor containing a processor core, memory, I/O ports, and supporting peripherals on one integrated circuit. The Zilog Z8 family belongs to the broader embedded-controller hierarchy that includes microcontrollers, embedded processors, and semiconductors. Compared with a general-purpose processor, this device targets smaller control loops where cost, simplicity, deterministic peripheral access, and board area are more important than complex computation or high memory bandwidth. Key verified specifications include a 12 MHz maximum clock speed, 2 KB of OTP program memory, 14 I/O ports, and a 4.5 V to 5.5 V operating supply range. Its operating temperature spans -40°C to +105°C, making it suitable for industrial-temperature equipment when the associated system design and qualification requirements are satisfied. The RoHS designation identifies the part as compliant with the supplied RoHS listing, while other regulatory classifications remain unconfirmed in the available data. The device uses the Z8 architecture described in the available product listings as an eZ8 CISC microcontroller. One-time-programmable memory is intended for firmware that does not require later field rewriting, helping control production complexity when the final program is known before deployment. The 14 I/O pins provide interfaces for digital inputs, output control, or mixed peripheral functions, while the 18-pin PDIP format supports conventional through-hole assembly and prototyping. Typical applications include small industrial controllers, sensor-interface modules, building-control products, appliance-control boards, and compact embedded instruments. The 12 MHz clock is appropriate for moderate-speed digital sequencing, while the 14 available I/O ports can connect switches, indicators, relays, and discrete sensing components. Because the part has 2 KB of OTP rather than large RAM or Flash, firmware should be sized carefully and peripheral-heavy tasks delegated to dedicated devices when necessary. The primary design consideration is validating the exact pin assignments, oscillator requirements, reset behavior, and programming procedure against the official manufacturer documentation before layout release. Designers should also confirm current consumption and timing behavior for the selected external clock and operating conditions, because those values were not established by the supplied verification data. DIP packaging requires adequate insertion clearance, mechanical support, and protection from electrostatic discharge during handling. This product page consolidates verified distributor specifications, lifecycle information, package details, commercial availability links, and practical application guidance. It also distinguishes verified Zilog family drop-in options from unverified cross-brand replacements so engineers can make a sourcing decision without treating general cross-reference tools as proof of pin and firmware compatibility.

询价 联系我们
Z86E0812SEG - 8-Bit 12MHz 2KB OTP MCU | Zilog
Z86E0812SEG

Z86E0812SEG - 8-Bit 12MHz 2KB OTP MCU | Zilog

The Zilog Z86E0812SEG is an 8-bit Z8 OTP microcontroller operating at 12 MHz with 2 KB of one-time-programmable program memory, 14 I/O ports, a 4.5 V to 5.5 V supply range, and an 18-pin SOIC package. It is intended for compact embedded-control products where economical one-time programming, deterministic peripheral control, and a small package are useful. The Z86E0812SEG is listed as active by the supplied datasheet listing and is positioned for low-volume, cost-sensitive controller designs. An OTP microcontroller is a single-chip embedded controller whose program memory is written once during manufacturing or provisioning. It belongs to the Z8 family and the broader microcontroller hierarchy that includes general-purpose MCUs, embedded controllers, ROM devices, and flash-memory devices. Unlike a flash MCU, the OTP architecture eliminates repeated in-circuit programming, which can simplify production tooling while fixing the installed firmware permanently. Applications must therefore treat programming as a manufacturing step rather than a field-update mechanism. The three principal selection parameters are the 12 MHz operating clock, 2 KB of OTP program memory, and 4.5 V to 5.5 V operating supply. The device also provides 14 I/O ports, making it suitable for compact products that read sensors, operate indicators, drive logic-level peripherals, and perform basic sequencing. Its 8-bit architecture and 18-pin SOIC form factor support space-constrained boards where a larger microcontroller package would be unnecessary. The Z8 family provides an established platform for embedded-control applications, but the supplied excerpts do not expose detailed timer, serial-interface, oscillator, or electrical-limit tables. The part should therefore be selected using the complete Zilog datasheet rather than inferred from the distributor summaries. In particular, engineers should confirm oscillator connection requirements, reset behavior, I/O drive limits, and programming procedure before committing a PCB or production fixture to this device. Typical uses include simple appliance controllers, building-control modules, industrial interface boards, LED sequencing systems, instrumentation front ends, and small motor or relay-control products. A 5 V supply keeps the device compatible with conventional embedded logic, while the limited 2 KB program memory favors compact control loops, state machines, and dedicated peripheral handling rather than general-purpose applications requiring extensive firmware storage. The primary design consideration is OTP irreversibility. Firmware must be thoroughly validated before programming because later corrections normally require a new programmed device rather than an in-circuit reflash. Board designers should also follow the datasheet's recommended bypass-capacitor and clock-network arrangements, and production engineers should build programming, test, and traceability steps into the manufacturing process. This page consolidates the verified distributor specifications, package information, sourcing links, alternative-family comparison, and practical OTP design considerations. It also distinguishes confirmed data from parameters that still require verification from the complete manufacturer datasheet, helping engineers make a defensible decision before committing the Z86E0812SEG to a design.

询价 联系我们
Z86E3016PEG - 8-Bit 16MHz 4KB OTP MCU | Zilog
Z86E3016PEG

Z86E3016PEG - 8-Bit 16MHz 4KB OTP MCU | Zilog

The Zilog Z86E3016PEG is an 8-bit Z8 microcontroller operating at 16 MHz with 4 KB of one-time-programmable memory in a 28-pin plastic dual-inline package. The verified product listings identify the device as the Z8 family member Z86E3016PEG and describe it as an 8-bit, 16 MHz microcontroller with 4K × 8 OTP program memory and UART capability. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. The Z8 belongs to the 8-bit microcontroller hierarchy, where each CPU cycle operates on an 8-bit data word. Such devices are used to read inputs, execute embedded control logic, and operate outputs in products where a compact controller, deterministic behavior, and modest processing requirements are more important than high computational throughput. The Z86E3016PEG's principal verified characteristics are its 16 MHz operating frequency, 8-bit CPU architecture, 4 KB OTP memory, and 28-pin PDIP package. The Mouser listing characterizes the device as an 8-bit MCU with 8K OTP and UART support, while the DigiKey listing identifies 4 KB, expressed as 4K × 8. Because these distributor descriptions express the OTP organization differently, engineers should confirm the exact program-memory organization against the manufacturer datasheet before assigning firmware capacity. The Z8 architecture is suitable for embedded motor-control, appliance-control, industrial-control, and serial-interface designs where an 8-bit CPU and UART simplify the control system. OTP program memory provides a one-time programmable implementation medium for products whose firmware is finalized before deployment. A 28-pin PDIP package also supports conventional through-hole assembly, prototyping, and manual inspection rather than requiring a fine-pitch surface-mount process. Before finalizing a design, verify the device's exact pin assignments, electrical limits, oscillator options, I/O count, UART characteristics, current consumption, and timing requirements using the manufacturer datasheet. Those parameters are not fully present in the supplied distributor snippets and are therefore marked as needed rather than estimated. Confirm that the 16 MHz clock source and UART baud-rate requirements can be met by the selected oscillator and external support components. This page combines verified distributor specifications, package information, pricing evidence, and explicitly qualified replacement analysis for the Z86E3016PEG. It also distinguishes verified drop-in candidates from unsupported cross-package options, helping engineers evaluate procurement and redesign decisions without treating package similarity as proof of functional equivalence.

询价 联系我们
Z86E3016PSG - 8-Bit 16MHz OTP MCU | Zilog
Z86E3016PSG

Z86E3016PSG - 8-Bit 16MHz OTP MCU | Zilog

Zilog Z86E3016PSG is an 8-bit Z8-family microcontroller with 16 MHz operating frequency, 4 KB of one-time-programmable program memory, 237 bytes of RAM, and 24 I/O pins in a 28-pin package. It is designed for cost-sensitive embedded-control applications that require simple programming, low-power wake-up behavior, and dedicated on-chip peripherals. A microcontroller is a programmable semiconductor that integrates a CPU, memory, I/O ports, timers, and support circuitry on one chip. The Z8 architecture belongs to the broader microcontroller and embedded-processor hierarchy. Compared with application-specific controllers, an OTP microcontroller offers a straightforward way to implement fixed control logic in appliances, security devices, HVAC equipment, and other compact electronic products. Verified device features include one-time-programmable memory, enhanced wake-up circuitry, programmable watchdog timers, and selectable low-noise EMI options. The 16 MHz operating speed provides processing headroom for simple digital control, while 24 I/O lines allow the device to connect to sensors, switches, indicators, and actuators. Two 8-bit timers support periodic events, timing delays, and basic event generation without requiring additional timing components. The 4 KB OTP program memory is organized as 4K by 8 bits, and the device includes 237 bytes of RAM for working data. OTP memory permits the final application firmware to be programmed once, making the controller well suited to production products whose control logic does not require field updates. This simplifies manufacturing compared with flash-programmable alternatives, but it also means a firmware revision generally requires a new programmed device rather than an in-system memory update. Typical uses include appliance controls, security-system peripherals, temperature and process-control equipment, HVAC modules, and compact industrial controllers. The 24 available I/O pins simplify designs that need multiple digital inputs and outputs, while the watchdog timer helps recover operation after faults or unexpected program flow. Enhanced wake-up circuitry supports low-power systems that must respond to external activity without maintaining continuous high activity. Designers should verify the exact package pinout, operating voltage, clock configuration, and programming procedure against the Zilog datasheet before layout. The provided search data confirms a 28-pin device but does not expose authoritative pin names or a complete manufacturer PDF URL, so those details remain marked as data needed rather than being inferred. Firmware and board design should also account for OTP programming limitations and the watchdog timeout behavior.

询价 联系我们
Z86E3016SSG - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E3016SSG

Z86E3016SSG - 8-Bit 16MHz OTP Microcontroller | Zilog

The Zilog Z86E3016SSG is an 8-bit Z8 microcontroller operating at 16 MHz with 4 KB of one-time-programmable program memory, 125 bytes of RAM, and 24 I/O lines in a 28-pin SOIC package. It operates from a 4.5 V to 5.5 V supply and is specified for a 0°C to 70°C ambient-temperature range. A microcontroller is an integrated circuit that combines a processor core, nonvolatile program memory, working RAM, and peripherals on one semiconductor device. The Z86E3016SSG belongs to the Z8 family of 8-bit microcontrollers and provides a compact control platform for products that require deterministic digital control but do not need the processing power, memory, or peripheral complexity of a 32-bit embedded processor. Its one-time-programmable architecture is intended for production devices whose firmware does not need field reprogramming. The principal device characteristics include a 16 MHz clock, 4 KB OTP program memory organized as 4K by 8 bits, 125 bytes of RAM, and 24 general-purpose I/O lines. Integrated power-on reset and watchdog-timer functions support dependable startup and recovery behavior. The 28-pin surface-mount SOIC package supports conventional PCB assembly while providing enough I/O capacity for sensors, indicators, control inputs, and external logic. The Z8 processor architecture provides an 8-bit execution model optimized for control-oriented embedded systems. At 16 MHz, it offers substantially greater timing headroom than many simpler 8-bit controllers, while the compact instruction and memory architecture keeps firmware and peripheral integration straightforward. Programmable OTP options include an RC oscillator and EPROM protection, allowing the selected configuration to be fixed according to the product's operating requirements. Typical uses include appliance controllers, industrial control modules, security and access-control equipment, instrumentation peripherals, and small embedded control subsystems. In each case, the 24 available I/O lines and 125 bytes of RAM are important constraints. Designers should allocate RAM carefully for stacks, buffers, and intermediate state, while treating the 4 KB OTP capacity as the final firmware limit. The primary design consideration is that one-time-programmable memory cannot be changed after programming. Firmware validation, programming fixtures, and production traceability therefore must be completed before devices reach end users. PCB layouts should also follow the verified 28-SOIC footprint and provide the decoupling and clock circuitry required by the manufacturer datasheet. This page consolidates verified distributor specifications, sourcing links, family alternatives, and practical selection guidance. It also distinguishes documented device facts from pricing, lifecycle, and pin-level information that was not established by the supplied source data.

询价 联系我们
Z86E3116PEG - 8-Bit 16MHz 2KB OTP MCU | Zilog
Z86E3116PEG

Z86E3116PEG - 8-Bit 16MHz 2KB OTP MCU | Zilog

The Zilog Z86E3116PEG is an 8-bit Z8 microcontroller with 2KB (2K x 8) of one-time programmable program memory, 125 bytes of RAM, 24 I/O lines, and a maximum operating frequency of 16MHz in a 28-DIP (0.600-inch, 15.24mm) package. Its specified operating-voltage range is 4.5V to 5.5V. An 8-bit microcontroller is a compact embedded-control IC used to execute firmware, read inputs, and control outputs in dedicated electronic systems. The Z86E3116PEG belongs to the microcontroller hierarchy, combining a Z8 processor core, program memory, RAM, digital I/O, and embedded timing functions. Its one-time-programmable architecture is intended for products where firmware is written during manufacturing and does not need to be updated in the field. Key device characteristics include 16MHz operation, 24 general-purpose I/O lines, 125 bytes of RAM, and programmable OTP options identified in the source data as RC oscillator, EPROM protection, auto latch disable, and permanent settings. Integrated features reported by the Microchip USA product listing include a power-on reset and watchdog timer, providing basic startup supervision and recovery support for embedded control firmware. The device uses a 5V-class supply range of 4.5V to 5.5V. Its 28-DIP package provides through-hole mounting and a 0.600-inch body width, making it appropriate for legacy-style control boards, industrial controllers, appliance controllers, and compact embedded systems assembled with conventional through-hole techniques. Because the available product information does not include the complete datasheet pin map, individual signal assignments cannot be reproduced safely here. Typical application roles include simple sequencing and logic control, switch and relay management, status-indicator control, small industrial equipment interfaces, and dedicated appliance controllers. In each case, firmware stored in the 2KB OTP program memory determines the control behavior, while the 24 I/O lines provide connections to external sensors, switches, and actuators. Designers should account for the 4.5V to 5.5V supply requirement, confirm that the board uses the 28-pin DIP footprint, and validate timing, oscillator, reset, and watchdog behavior against the manufacturer datasheet before production release. The available data identifies the oscillator as internal, but its frequency range and detailed configuration requirements are not stated. This page consolidates verified distributor specifications, current sourcing information, package details, application guidance, and explicit data gaps. It also distinguishes verified facts from unspecified parameters, helping engineers evaluate the Z86E3116PEG without mistaking generic cross-reference tools for evidence of a pin-compatible replacement.

询价 联系我们
Z86E3116PSG - 16MHz 8-Bit Z8 MCU | Zilog
Z86E3116PSG

Z86E3116PSG - 16MHz 8-Bit Z8 MCU | Zilog

The Zilog Z86E3116PSG is an 8-bit Z8 microcontroller operating at 16 MHz, with 2 KB of one-time-programmable program memory, 125 bytes of RAM, and 24 general-purpose I/O pins. The device is packaged in a 28-pin DIP measuring 0.600 inches across the row spacing, or 15.24 mm. An 8-bit microcontroller is a compact embedded processor designed to execute control logic, monitor digital inputs, and operate peripherals using a relatively small instruction set and memory footprint. Within the embedded-control hierarchy, it belongs to the Z8 family of 8-bit microcontrollers and combines a CPU core, nonvolatile OTP program memory, RAM, timers, and general-purpose I/O in one integrated circuit. The Z86E3116PSG provides a 16 MHz operating frequency, a 2K x 8 OTP architecture, and 24 I/O pins. Its on-chip resources include two 8-bit timers, a power-on reset function, and a watchdog timer. OTP memory allows firmware to be programmed once during manufacturing or commissioning, making the device suitable for fixed-control products in which field updates are unnecessary. The Z8 architecture supports economical embedded-control designs while keeping the external component count relatively low. With 24 I/O pins, the device can directly interface with switches, indicators, relays, sensors, and discrete logic. Two timers support periodic tasks, input timing, debouncing, or basic event counting, while the watchdog timer provides a mechanism for recovering from unexpected program flow faults. Typical uses include appliance controls, small industrial controllers, building-control modules, simple sensor interfaces, LED and lighting controllers, and compact embedded products requiring a DIP footprint. The through-hole DIP package is particularly useful for prototypes, low-to-medium-volume products, and assemblies where socketed or manually inserted construction is preferred. Designers should verify each signal's electrical limits, oscillator requirements, programming method, and timing behavior against the manufacturer datasheet. Because OTP memory cannot be erased, firmware validation and manufacturing-programming controls are especially important. The 28-pin DIP footprint also requires adequate board space, connector accessibility, and mechanical clearance around the device. This page combines the Z86E3116PSG's principal memory, timing, I/O, and packaging characteristics with a focused drop-in alternative assessment, practical implementation guidance, and an application-oriented selection framework for compact Z8-based control designs.

询价 联系我们
Z86E3116SEG - 8-Bit 16MHz 2KB OTP MCU | Zilog
Z86E3116SEG

Z86E3116SEG - 8-Bit 16MHz 2KB OTP MCU | Zilog

The Zilog Z86E3116SEG is an 8-bit Z8 CISC microcontroller with 2KB of one-time-programmable program memory, 125 bytes of RAM, 24 I/O lines, and a 16MHz maximum operating frequency, supplied in a 28-pin SOIC package. It operates from a 4.5V to 5.5V supply across a -40°C to +105°C temperature range. A microcontroller is a programmable semiconductor that integrates a CPU, memory, digital I/O, and supporting peripherals into one package. The Z86E3116SEG belongs to the Z8 family of 8-bit microcontrollers, a class commonly used for embedded control because it combines a compact instruction set, dedicated I/O, and low-cost single-power-supply operation. Its larger program and data memories distinguish it from basic 8-pin devices while retaining the straightforward architecture suited to appliance controls, interface logic, and compact embedded systems. Key features include 2KB of OTP program memory, 125 bytes of RAM, 24 I/O lines, and operation up to 16MHz. Programmable OTP options listed in the device data include an RC oscillator, EPROM protection, auto latch disable, and permanent disable. The 28-pin SOIC package is also available in tube packaging according to the verified distributor data, supporting conventional through-hole board assembly rather than a compact surface-mount land pattern. The device uses the Z8 CISC architecture and includes an internal oscillator option according to the published specification summary. Its 125-byte RAM supports protocol state, counters, status flags, and short working buffers, while the 2KB OTP program area provides fixed firmware storage after programming. Because OTP memory cannot be electrically rewritten, firmware changes normally require a new programmed device rather than an in-circuit update. Typical uses include temperature controllers, appliance user interfaces, simple motor-control logic, industrial panel controllers, and embedded peripheral interfaces. In these applications, the 24 available I/O lines can distribute digital signals while the 16MHz operating rate supports time-based control routines and serial communication handling. A designer should still budget memory for interrupts, protocol handling, and application logic. The primary design constraint is nonvolatile program flexibility: OTP programming makes Z86E3116SEG appropriate for production builds with stable firmware, while applications requiring field updates may prefer a flash-memory MCU. Board layouts must also respect the 28-pin SOIC footprint and provide the required 4.5V to 5.5V supply, decoupling, programming interface, and exposed I/O routing. This product page consolidates verified distributor specifications, package information, temperature limits, and drop-in comparison data, then adds practical guidance on OTP programming, power-supply design, PCB layout, and selection constraints that are not presented as a complete replacement for the manufacturer datasheet.

询价 联系我们
Z86E3116SSG - 8-Bit 16MHz OTP MCU | Zilog
Z86E3116SSG

Z86E3116SSG - 8-Bit 16MHz OTP MCU | Zilog

The Zilog, Inc. Z86E3116SSG is an 8-bit Z8 microcontroller operating at up to 16 MHz, with 2 KB of one-time-programmable memory in a 28-pin SOIC package. It combines a compact embedded-control architecture with on-chip nonvolatile program storage for designs that do not require frequent firmware updates. The 28-pin surface-mount package provides dedicated I/O capacity while supporting compact control boards, household appliances, and dedicated embedded modules. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The Z8 belongs to the microcontroller hierarchy within integrated circuits and embedded processing. The Z86E3116SSG uses one-time-programmable memory, meaning its final firmware is written during manufacturing or production and cannot be rewritten afterward. This is useful for stable products where field updates are unnecessary and security through write protection is desirable. The device's headline characteristics are an 8-bit CPU architecture, a 16 MHz operating frequency, and 2 KB of OTP program memory. Its 28-pin SOIC package is designed for conventional surface-mount assembly and provides a practical upgrade from larger through-hole controllers when board area is constrained. Because the target MPN is identified as a Z8 2K OTP device, it is suited to compact control logic rather than connectivity-heavy or high-memory embedded systems. Program memory size is the principal design boundary. A 2 KB OTP budget supports a compact state machine, supervisory routine, keypad controller, or simple peripheral-control firmware, but it requires disciplined code sizing and limits the amount of application logic, tables, and diagnostics that can be included. The 16 MHz clock provides the timing headroom needed for responsive control loops, scanning, and communication routines, provided the firmware is designed around the limited code storage. Typical applications include appliance control modules, small motor-control boards, illumination controllers, keypads, security accessories, and compact embedded control products. A designer should assign ports according to the datasheet pin description table and reserve the programming and reset-related pins required by the selected Z8 device functions. The 28-pin package also makes it practical to retain through-hole-style prototyping while moving to automated surface-mount production. The primary engineering consideration is validating the complete firmware image before OTP programming. Because OTP cannot be revised after programming, functional testing, boundary-condition checks, and production traceability become especially important. Verify the oscillator, reset behavior, port multiplexing, and any peripheral configuration against the manufacturer datasheet before releasing devices for programming. This page combines manufacturer-oriented device identification, verified distributor specifications, same-family drop-in candidates, and practical design guidance for teams evaluating the Z86E3116SSG as a compact 8-bit control solution.

询价 联系我们
Z86E3312PSG - 8-Bit 12MHz Z8 MCU | Zilog
Z86E3312PSG

Z86E3312PSG - 8-Bit 12MHz Z8 MCU | Zilog

Zilog Z86E3312PSG is an 8-bit Z8 microcontroller operating at 12 MHz with 4 KB of one-time-programmable program memory, 237 bytes of RAM, and 24 general-purpose I/O pins. The device is housed in a 28-pin plastic DIP package and operates from a 4.5 V to 5.5 V supply. Its integrated peripherals include power-on reset, a watchdog timer, and EBI/EMI connectivity, making it suitable for compact embedded control systems, appliance controls, and simple peripheral interfaces. An 8-bit microcontroller is a programmable semiconductor that executes instructions from a defined instruction set while using registers, memory, and dedicated I/O circuitry to control a system. The Z86E3312PSG belongs to the Zilog Z8 family, combining a general-purpose embedded processor with on-chip memory and communication resources in one package. Its one-time-programmable memory allows a finished device to be programmed once for a specific application, which is useful for cost-sensitive controllers where field re-programming is unnecessary. The Z86E3312PSG combines a 12 MHz operating clock with 4 KB of OTP program memory and 237 x 8 bytes of RAM. Its 24 general-purpose I/O pins provide substantial parallel connectivity for switches, indicators, relays, displays, sensors, and external logic. Integrated power-on reset and watchdog-timer functions support dependable startup and recovery after faults. EBI/EMI resources add external bus or interface capability without requiring a separate protocol controller. The 4.5 V to 5.5 V operating range places the device in a classic 5 V embedded-control environment. A 5 V rail allows direct interfacing with many conventional 5 V logic families, although every external signal and supply rail must remain within the limits defined by the manufacturer datasheet. The 12 MHz clock provides the execution rate for control loops, state machines, user-interface scanning, and moderate data-processing tasks rather than high-throughput workloads. Typical uses include appliance and equipment controllers, building-control interfaces, LED and switch management, simple industrial modules, and embedded peripheral controllers. The 24 I/O pins are particularly useful when a design must connect multiple discrete inputs and outputs while retaining external-bus capability. A system can place the MCU between operator controls and actuators while using the watchdog timer to recover from firmware or communication stalls. Design around the DIP-28 footprint and verify all pin assignments from the manufacturer pin-description table before laying out the PCB. Place the device away from heat sources and follow the recommended decoupling arrangement for the 5 V supply. Because OTP memory cannot be rewritten, validate the complete firmware image before programming the production device and maintain a controlled manufacturing process. This product page consolidates the core electrical, memory, interface, lifecycle, and package characteristics of the Z86E3312PSG with practical application guidance. It also distinguishes verified functions from parameters that require confirmation in the manufacturer datasheet, helping engineers evaluate controller selection, PCB reuse, firmware planning, and production provisioning.

询价 联系我们
Z86E3312SSG - 8-Bit 12MHz OTP Microcontroller | Zilog
Z86E3312SSG

Z86E3312SSG - 8-Bit 12MHz OTP Microcontroller | Zilog

Zilog Z86E3312SSG is an 8-bit Z8 microcontroller with a 12 MHz clock, 4 KB of one-time-programmable memory organized as 4K x 8, and 24 I/O ports. The device operates from a 4.5 V to 5.5 V supply and is listed as an active part in the Zilog Z86E3312 family. Its combination of OTP program memory, an 8-bit CPU, and a 5 V operating range makes it suitable for embedded control products requiring fixed-program logic and broad I/O access. An 8-bit microcontroller is a compact embedded-processing device that executes firmware from internal program memory and reads inputs through configurable digital ports. The Z86E3312 belongs to the Z8 family, a hierarchy that includes 8-bit microcontrollers, embedded processors, integrated circuits, and semiconductors. Zilog designed this controller for cost-sensitive appliances, access controls, industrial interfaces, and other systems where deterministic digital control is more important than high memory capacity or high-speed computation. The principal device parameters include a 12 MHz maximum clock frequency, 4 KB of OTP program memory, an 8-bit data bus, 24 I/O ports, and a 4.5 V to 5.5 V supply-voltage range. OTP memory allows the application program to be written during manufacturing and prevents subsequent modification, which supports application locking and production traceability. The 24 available I/O lines provide substantial connectivity for switches, sensors, indicators, relays, and communication peripherals. The Z86E3312SSG is identified as part of the Zilog Z8 microcontroller series and uses the SSG ordering code. Distributor records associate the device with the Z86E3312 family and identify its lifecycle as active. Because the detailed package dimensions, pin assignments, interrupt architecture, timer resources, and electrical timing limits are not stated in the cited product records, engineers should use the manufacturer datasheet and its pin-description table before finalizing a PCB layout. Typical uses for this controller include industrial control panels, appliance control boards, security and access-control equipment, programmable logic controllers, and compact instrumentation. In these applications, the 24 I/O ports can distribute control signals across a compact board, while the 12 MHz clock provides sufficient throughput for sequential logic, debouncing, state-machine execution, and periodic interface servicing. OTP programming is particularly appropriate when the finished control logic must remain fixed. The main design consideration is to verify the complete pinout, pin multiplexing, and peripheral assignments against the manufacturer datasheet before PCB routing. Designers should also confirm that every attached signal remains compatible with the 4.5 V to 5.5 V supply range and that firmware timing accounts for the 12 MHz operating limit. A Request a Quote form is available on this page for current commercial availability, lead time, and quantity requirements. This product record combines the exact Z86E3312SSG identity, core electrical and memory characteristics, lifecycle information, practical embedded-control applications, sourcing guidance, and a conservative drop-in assessment. It is designed to help engineers evaluate whether the MCU fits a fixed-program 8-bit design while separating confirmed specifications from details that still require direct manufacturer-document verification.

询价 联系我们
Z86E3412PSG - 8-Bit 12MHz 16KB OTP MCU | Zilog
Z86E3412PSG

Z86E3412PSG - 8-Bit 12MHz 16KB OTP MCU | Zilog

Zilog, Inc. Z86E3412PSG is an 8-bit CMOS Z8 microcontroller operating at up to 12 MHz, with 16 KB of one-time-programmable program memory in a 28-pin through-hole DIP package. Its operating supply range is 5.00 V to 5.50 V, making it a directly powered embedded-control component for compact legacy-control systems. An MCU, or microcontroller, is a single semiconductor integrating a processor core, program memory, data memory, and peripherals on one die. Within the embedded-control hierarchy, the Z8 family belongs to the broader category of 8-bit microcontrollers and combines a compact instruction set with application-specific peripherals. Its OTP memory makes the device suitable for products where firmware is finalized during manufacturing and field reprogramming is unnecessary. The principal specifications of the Z86E3412PSG are its 8-bit CPU architecture, 12 MHz maximum clock frequency, and 16 KB OTP program memory organized as 16K x 8. The device is identified as a CMOS Z8 microcontroller, while the manufacturer and distributor listings place it in the 28-pin DIP class. These characteristics distinguish it from devices that require external program memory or provide flash-based field updates. The Z86E3412PSG belongs to the Z86E3412 family and is designed for embedded control rather than high-performance computing. OTP program storage gives the manufacturer a defined, permanently programmed firmware path and can support repeatable production across an appliance or controller. The 12 MHz operating rate provides more timing headroom than many low-pin-count 8-bit controllers while retaining the simplicity of a compact MCU architecture. Typical applications include dedicated appliance controllers, small motor-control boards, keypads, sensor-interface modules, and simple sequence controllers. Its 28-pin DIP format is useful for prototypes, repairable assemblies, and through-hole production where a QFP package would be unnecessary. A system designer should verify peripheral assignments, interrupt behavior, and timing requirements against the device's pin description and application information. A critical design consideration is that OTP memory cannot be erased and rewritten in the field. Firmware changes therefore require a new programmed device or a board-level replacement strategy. Decoupling, oscillator layout, I/O drive, and programming should be implemented according to the manufacturer datasheet, especially in electrically noisy motor or relay-control environments. This product page combines the manufacturer device identity with focused design guidance, verified package and memory details, application analysis, and same-family replacement considerations. It is intended to help engineers confirm fit, assess programming constraints, and plan a reliable embedded-control implementation before requesting an order.

询价 联系我们
Z86E3412SEG - 8-Bit 12MHz 16KB OTP MCU | Zilog
Z86E3412SEG

Z86E3412SEG - 8-Bit 12MHz 16KB OTP MCU | Zilog

The Zilog Z86E3412SEG is an 8-bit Z8 microcontroller operating at 12 MHz with 16 KB of one-time-programmable memory in a 28-pin SOIC package. Its operating voltage range is 3.5 V to 5.5 V, making it suitable for embedded control systems that require a compact, nonvolatile program memory and an 8-bit processing architecture. A microcontroller is a programmable semiconductor that integrates a CPU core, program memory, data memory, and peripherals into one device. The Z8 belongs to the broader 8-bit MCU category, where the embedded processor executes firmware to monitor inputs and control outputs. Unlike a general-purpose microprocessor, the Z86E3412SEG is designed for compact embedded-control tasks such as appliance control, simple industrial interfaces, and embedded peripheral control. The Z86E3412SEG's principal specifications include its 8-bit CPU, 12 MHz operating frequency, and 16 KB of OTP memory. The OTP program memory provides a stable, nonvolatile place for firmware because its contents cannot be erased after programming. The device is also listed with 237 bytes of data memory and a 3.5 V to 5.5 V supply range. Its 28-SOIC package supports conventional PCB assembly and is available in a 300 mil body format. The Z8 architecture is intended for straightforward embedded workloads where deterministic control, compact code size, and low component count are more important than high computational throughput. At 12 MHz, the processor is suitable for polling multiple inputs, executing control logic, communicating through serial peripherals, and managing discrete or analog interface functions. Exact peripheral assignments, interrupt behavior, and electrical limits should be checked against the manufacturer documentation before final circuit implementation. Typical uses include household appliance controllers, small motor-control boards, temperature or level monitoring products, programmable interface modules, and compact industrial automation equipment. In these systems, the MCU can execute startup routines, acquire sensor information, update displays or indicators, and operate actuator outputs while keeping the external hardware count low. Designers should begin with the manufacturer's pin-description table when assigning PCB nets and should preserve the device's documented power, ground, reset, clock, and programming connections. Because the MCU is intended for OTP programming, firmware development must account for the non-erasable program memory. Decoupling, oscillator stability, programming access, and unused-pin treatment should follow the device's recommended application circuit and layout guidance. This product page consolidates the exact orderable MPN, core architecture, memory and frequency specifications, package details, sourcing guidance, and engineering considerations. It also distinguishes confirmed orderable information from characteristics that require the manufacturer datasheet, helping engineers plan sourcing and hardware development without confusing this 28-SOIC device with packages or variants that have different pin assignments.

询价 联系我们
Z86E3412SSG - 12MHz 16KB OTP 8-Bit MCU | Zilog
Z86E3412SSG

Z86E3412SSG - 12MHz 16KB OTP 8-Bit MCU | Zilog

The Zilog Z86E3412SSG is an 8-bit Z8 Z8 One-Time Programmable microcontroller with a 12 MHz clock, 16 KB of OTP program memory organized as 16K x 8, and a 28-pin SOIC package. It is designed for embedded control applications that require a compact 8-bit controller, nonvolatile program storage, and a peripheral-oriented MCU architecture. An 8-bit microcontroller is a microprocessor and embedded-control IC built around an 8-bit processing architecture. The Z8 family belongs to the broader hierarchy of embedded processors, microcontrollers, and semiconductors. One-time programmable memory allows firmware to be written once during manufacturing or programming, providing nonvolatile program storage without the removable-program-memory cost of EEPROM. This makes the Z86E3412SSG suitable for fixed-function products whose firmware does not need field updates. The principal device characteristics include a 12 MHz operating frequency, 16 KB of OTP program memory, 8-bit processing, CMOS construction, and a 28-pin SOIC package. The reported operating-temperature range for this exact ordering code is 0°C to +70°C. The part is also identified as Pb-free, although separate RoHS, REACH, and halogen-free declarations were not included in the supplied source data and therefore remain unconfirmed. The 12 MHz clock rate provides the timing headroom expected from a Z8-class embedded controller, while the 16K x 8 OTP organization determines the available program address space. Because the source data does not provide RAM capacity, I/O pin assignments, peripheral inventories, electrical limits, watchdog behavior, or timing characteristics, those details must be confirmed in the manufacturer datasheet before a board design is released. Typical uses include fixed-function industrial controllers, appliance-control panels, small instrument controllers, status interfaces, and embedded control modules where an 8-bit processor and OTP firmware storage are sufficient. Its 28-pin SOIC package also supports conventional surface-mount assembly, but package dimensions, pin geometry, and exposed thermal requirements are not included in the supplied evidence. For new layouts, engineers should verify the complete 28-pin pinout, required decoupling, oscillator connection, programming method, reset requirements, and absolute maximum ratings against the official datasheet. The OTP programming process should also be coordinated with manufacturing because an incorrectly programmed device generally cannot be rewritten like flash memory. This page consolidates the verified distributor listings, an identified same-package family alternative, package constraints, pricing evidence, and engineering-selection guidance. It also clearly separates confirmed Z86E3412SSG facts from electrical and programming details that require manufacturer documentation.

询价 联系我们
Z86E4016AEG - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E4016AEG

Z86E4016AEG - 8-Bit 16MHz OTP Microcontroller | Zilog

Zilog Z86E4016AEG is an 8-bit Z8 CISC microcontroller with a 16 MHz operating frequency, 4 KB of one-time-programmable program memory, and 236 bytes of RAM, packaged in a 44-pin LQFP measuring 10 mm by 10 mm. The device operates from a 4.5 V to 5.5 V supply and targets compact embedded-control systems requiring embedded flash-equivalent program storage, serial I/O, timers, and a surface-mount footprint. An 8-bit microcontroller is a compact embedded-control IC that executes firmware from program memory and uses dedicated peripherals to sense inputs, control outputs, and communicate with external circuits. Zilog's Z8 family combines a simple CISC-style architecture with integrated timers, serial interfaces, and interrupt support. In the broader semiconductor hierarchy, this device belongs to the microcontroller, embedded-processor, and integrated-circuit categories. The Z86E4016AEG's main engineering characteristics include 16 MHz operation, 4 KB of OTP memory, 236 bytes of data RAM, and a 4.5 V to 5.5 V operating range. OTP memory permits a programmed device to be installed directly into production hardware without permitting subsequent firmware changes. The 44-pin LQFP also exposes more I/O and peripheral connections than a small-package microcontroller, making the part suitable for products that require several discrete control functions. The Z8 core uses an 8-bit datapath and is designed for straightforward embedded applications rather than high-throughput computation. Firmware must fit within the 4 KB program-memory limit, while the 236-byte RAM constrains simultaneously retained data structures and stack usage. Designers should therefore use interrupt-driven routines, compact state tables, and peripheral hardware where practical. The 5 V supply range also allows the controller to operate directly from regulated 5 V industrial or consumer rails after appropriate filtering and decoupling. Typical uses include appliance controllers, small motor-control boards, keypad interfaces, LED status indicators, temperature-measurement systems, simple serial bridges, and dedicated embedded-control panels. The LQFP package can be assembled by conventional surface-mount equipment, while its relatively high pin count provides access to multiple I/O, timer, interrupt, and serial-interface functions. Applications requiring field-updatable firmware should use a flash-memory MCU instead because the Z86E4016AEG provides OTP rather than rewritable program memory. Decouple the 5 V supply close to the device with suitable high-frequency and bulk capacitance, route oscillator and reset-related connections away from noisy switching nodes, and follow the manufacturer pin-assignment guidance when allocating board space. Because program memory is one-time programmable, validate the complete firmware image and production programming process before committing components to a build. This product overview combines electrical characteristics, package constraints, application guidance, programming implications, and practical design considerations to support component selection, PCB planning, and embedded-system implementation.

询价 联系我们
Z86E4016ASG - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E4016ASG

Z86E4016ASG - 8-Bit 16MHz OTP Microcontroller | Zilog

The Zilog Z86E4016ASG is an 8-bit Z8 microcontroller operating at up to 16 MHz, with 4 KB of one-time programmable program memory, 236 bytes of RAM, and 32 general-purpose I/O pins in a 44-pin LQFP package measuring 10 mm by 10 mm. Its operating supply range is 3.5 V to 5.5 V, and the device is specified for a 0°C to +70°C ambient temperature range. A microcontroller is an integrated circuit dedicated to executing embedded control software. The Z8 family belongs to the broader hierarchy of embedded processor, microcontroller, semiconductor, and electronic-control categories. It combines a processor core, nonvolatile program storage, volatile data memory, digital I/O, and integrated timing functions on one device, allowing compact designs for control, monitoring, and user-interface applications. The Z86E4016ASG provides 4 KB of OTP memory organized as 4K x 8, along with 236 x 8 bytes of RAM. Its 16 MHz operating rate supports efficient sequential instruction execution, while 32 general-purpose I/O pins provide a broad interface for switches, indicators, sensors, actuators, and external logic. Built-in power-on reset and watchdog-timer functions support dependable startup and recovery after a program fault. An internal oscillator simplifies board design by removing the need for an external clock source in a basic configuration. The device combines that oscillator with the Z8 core, OTP program memory, RAM, I/O ports, power-on reset, and watchdog timer in a 44-pin LQFP-44 package. The 10 mm by 10 mm surface-mount format supports compact production assemblies while retaining a generous pin count for mixed-signal and control-oriented products. Typical uses include industrial control panels, appliance controllers, building equipment, simple security systems, digital input/output modules, and compact embedded products. The 32 I/O pins make the device useful where several external switches, indicators, relays, or sensors must be coordinated by a single controller. Applications requiring one-time programmable firmware benefit from the OTP architecture because the finished program cannot be electrically rewritten. When designing a board, confirm every signal against the Z86E4016ASG pin description before assigning PCB tracks. Decoupling requirements, oscillator behavior, reset timing, and unused-pin treatment should follow the manufacturer datasheet. The 3.5 V minimum operating voltage and 5.5 V maximum operating voltage also determine the compatible sensor and actuator interface ranges. This product page consolidates the verified device specifications, sourcing information, engineering-use guidance, and a qualified comparison framework. Because the Z8 family's programming and peripheral configuration are application-specific, engineers should also consult the manufacturer documentation for the complete pin-description table and device operating characteristics.

询价 联系我们
Z86E4016FEC - 8-Bit 16MHz 4KB OTP MCU | Zilog | LQFP-44
Z86E4016FEC

Z86E4016FEC - 8-Bit 16MHz 4KB OTP MCU | Zilog | LQFP-44

Zilog, Inc. Z86E4016FEC is an 8-bit Z8 microcontroller with a 16 MHz maximum operating frequency, 4 KB of one-time-programmable program memory, and a 44-LQFP surface-mount package measuring 10 mm by 10 mm. It integrates 32 general-purpose I/O pins, power-on reset, and a watchdog timer for compact embedded-control designs. An 8-bit microcontroller is a programmable integrated circuit designed around an eight-bit processor and a set of dedicated peripherals. Within the embedded-control hierarchy, the Z86E4016FEC belongs to the Z8 family of Zilog microcontrollers and provides a combination of processor throughput, OTP program storage, digital I/O, reset supervision, and watchdog protection in one device. The principal features include 8-bit processing at up to 16 MHz, 4 KB of OTP program memory, and 32 general-purpose I/O pins. Two 8-bit timers are also identified in the verified technical listing. OTP memory provides a permanent on-chip program store, which can be appropriate for cost-sensitive products in which firmware does not require field updates. The device uses the Z8 architecture and is intended for embedded products requiring straightforward digital control rather than high-bandwidth processing. Its 16 MHz operating speed supports control loops, button and sensor handling, indicator updates, and peripheral coordination. The integrated power-on reset and watchdog timer help establish reliable startup behavior and recover from certain software faults. Typical application areas include industrial control panels, appliance controllers, building equipment, simple motor-control interfaces, and dedicated embedded modules. The 44-LQFP package provides 32 general-purpose I/O pins, allowing a design to connect multiple sensors, switches, displays, and actuators while leaving fewer functions to external logic. Design planning should focus on OTP programming timing, available RAM, pin multiplexing, oscillator configuration, and programming-tool compatibility. Because the verified data does not provide a complete pin list, voltage limits, or thermal ratings, those details must be confirmed against the official Zilog documentation before schematic capture or PCB release. This product page consolidates verified distributor specifications, package information, application guidance, and verified sourcing links. It also clearly separates confirmed data from unavailable specifications, helping engineers make sourcing and design decisions without treating unverified electrical details as guaranteed facts.

询价 联系我们
Z86E4016FEG - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E4016FEG

Z86E4016FEG - 8-Bit 16MHz OTP Microcontroller | Zilog

The Zilog Z86E4016FEG is an 8-bit Z8 microcontroller with 4 KB of one-time-programmable program memory, 236 x 8 bits of RAM, 32 I/O pins, and a maximum operating speed of 16 MHz. It is housed in a 44-LQFP surface-mount package measuring 10 x 10 mm. The device also includes an internal oscillator, Power-On Reset (POR), and a Watchdog Timer (WDT), providing the core resources for compact embedded control designs. An 8-bit microcontroller is a microprocessor integrated with memory, I/O, and supporting peripherals on one integrated circuit. Within the semiconductor hierarchy, the Z86E4016FEG is an MCU, a microcontroller, and an embedded processing IC designed for control-oriented tasks rather than high-throughput computation. Its OTP program memory allows firmware to be programmed once during manufacturing or final assembly, while its 236-byte RAM supports working variables, stack operations, and short-lived application data. The principal feature set includes 4 KB of OTP program memory, 236 x 8 bits of RAM, 32 general-purpose I/O pins, and a 16 MHz operating speed. An internal oscillator reduces the need for an external clock source in applications that do not require an extremely precise timing reference. The Power-On Reset establishes a known startup state, while the Watchdog Timer helps recover the controller from an unintended stalled execution sequence. The Z86E4016FEG belongs to the Zilog Z8 family, an 8-bit MCU architecture commonly used for appliance control, simple industrial interfaces, embedded instrumentation, and compact control panels. Its 32 I/O pins provide substantial external connectivity relative to smaller 8- and 16-pin devices, making the device useful for keypads, displays, sensors, relay logic, and communication peripherals when their electrical requirements are compatible with the MCU's specifications. The 44-LQFP package supports surface-mount assembly but requires careful land-pattern design and adequate pin escape routing. Published source material states that total package power dissipation should not exceed 1.2 W under the indicated stress conditions. Designers should therefore verify the complete operating-voltage, input-pin, clock, and output-drive budget against the manufacturer datasheet before releasing a production PCB. This product page consolidates the verified Z86E4016FEG specifications, package details, source links, engineering guidance, and replacement analysis. It also clearly separates verified facts from unavailable electrical details, helping engineers avoid assumptions about voltage limits, timer channels, communications peripherals, or pin-level functions that are not present in the supplied source data.

询价 联系我们
Z86E4016PEG - 16MHz 8-Bit OTP Microcontroller | Zilog
Z86E4016PEG

Z86E4016PEG - 16MHz 8-Bit OTP Microcontroller | Zilog

Zilog Z86E4016PEG is an 8-bit Z8 CISC microcontroller operating at 16 MHz, with 4 KB of one-time-programmable program memory, 236 bytes of RAM, and 32 I/O lines in a 40-pin PDIP package. It operates from 4.5 V to 5.5 V and is designed for cost-sensitive embedded control systems requiring a compact peripheral set and deterministic embedded processing. A microcontroller is an integrated circuit containing a processor core, program memory, data memory, I/O ports, and embedded peripherals on one die. The Z86E4016PEG belongs to the Z8 family of 8-bit microcontrollers, a cost-effective architecture widely used for appliance control, industrial interfaces, simple instrumentation, and dedicated automation. Its CISC instruction set is designed for efficient control-oriented code and short development cycles. The device provides 4 KB of OTP program memory, allowing firmware to be programmed once after development. Its 236 x 8 bytes of RAM provide working storage for variables, stack operations, and application data. With 32 I/O lines, the MCU can connect directly to digital sensors, switches, indicator circuits, displays, and external control devices. Integrated Power-On Reset and Watchdog Timer functions support dependable startup and recovery behavior. The 16 MHz operating frequency provides a practical balance between processing throughput, power consumption, and design complexity for embedded control tasks. The internal oscillator eliminates the need for an external clock in applications that do not require precise timing references. The 4.5 V to 5.5 V operating range supports conventional industrial and consumer logic environments, while the 40-pin PDIP package supports conventional through-hole PCB assembly and prototyping. Typical applications include appliance controllers, small motor-control interfaces, digital input/output modules, LED sequencing systems, temperature-control products, and industrial control boards. The 32 available I/O lines make it especially useful when multiple discrete inputs and outputs must be managed without adding another interface IC. Firmware can implement debouncing, state machines, interlocks, fault handling, and communication routines. Designers should verify the complete pin assignment and peripheral multiplexing in the manufacturer datasheet before assigning signals. Because the program memory is OTP rather than rewriteable flash, firmware changes after programming require a different device and a complete replacement. Decoupling, grounding, and reset circuitry should follow the datasheet layout recommendations, and unused I/O pins should be assigned deliberately rather than left without a defined state. This product page combines the Z8 microcontroller specifications, verified package and memory information, same-package replacement references, application guidance, and design considerations. It is intended to help engineers evaluate firmware fit, pin compatibility, OTP programming constraints, and PCB assembly requirements before selecting the Z86E4016PEG.

询价 联系我们
Z86E4016PSG - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E4016PSG

Z86E4016PSG - 8-Bit 16MHz OTP Microcontroller | Zilog

The Zilog Z86E4016PSG is an 8-bit Z8 microcontroller with a 16 MHz maximum clock frequency and 4 KB of one-time-programmable program memory. It is packaged in a 40-pin through-hole dual inline package and is positioned for cost-sensitive, high-volume embedded control applications. The device combines a Z8 CPU core with 236 bytes of data RAM and operates as a compact embedded controller for consumer, automotive, security, and HVAC equipment. The Z86E4016PSG is designed around one-time-programmable memory, which allows the final firmware image to be written during manufacturing and removes the need for external reprogrammable flash. Its 4 KB program memory is intended for compact control loops, keypad and panel management, sensor conditioning, actuator control, and simple protocol handling. The 16 MHz clock provides adequate processing headroom for deterministic control functions without requiring a high-pin-count package. Important device characteristics include the Z8 CPU architecture, 236 bytes of data RAM, 4 KB OTP program memory, and a 40-DIP package. The Z8 family is intended for applications where cost, simplicity, and compact control are more important than high-capacity firmware storage or extensive connectivity. The through-hole package also supports conventional through-hole PCB assembly and is suitable for designs using socketed or manually assembled boards. Typical application areas include consumer appliances, automotive accessory modules, security and access-control equipment, HVAC controllers, and small industrial control panels. The Z86E4016PSG is especially useful when the control algorithm is stable and the product can be programmed once during production. Designers should plan the firmware size carefully because OTP memory cannot be rewritten, and should use the manufacturer pin-description table when assigning PCB tracks and I/O functions. For new designs, check the manufacturer datasheet for electrical limits, clock configuration, port behavior, and programming details before layout release. This page combines verified distributor listings, the manufacturer datasheet reference, package information, and practical selection guidance for engineers evaluating a 40-pin 8-bit OTP controller.

询价 联系我们
Z86E4016VSG - 8-Bit 16MHz OTP Microcontroller | Zilog
Z86E4016VSG

Z86E4016VSG - 8-Bit 16MHz OTP Microcontroller | Zilog

The Zilog Z86E4016VSG is an 8-bit Z8 microcontroller with 16 MHz clock speed, 4 KB of one-time-programmable ROM, 32 I/O lines, and a PLCC-44 surface-mount package. The device operates from a 4.5 V to 5.5 V supply and is intended for embedded control applications requiring an 8-bit data bus and compact peripheral integration. A microcontroller is a programmable semiconductor that combines a processor core, program memory, data memory, I/O ports, timers, and communication interfaces on one integrated circuit. The Z86E4016VSG belongs to the Z8 Classic family of 8-bit embedded processors. It is positioned between general-purpose microcontrollers and larger 16-bit or 32-bit control platforms, providing sufficient performance for appliance controls, industrial interfaces, instrumentation, and embedded peripheral control. The principal specifications are a 16 MHz clock speed, 4 KB of OTP program memory, 236 bytes of RAM, and 32 I/O lines. The 8-bit bus architecture simplifies connection to common peripherals, while the 44-pin PLCC package provides a substantial lead count for digital input/output functions and control signals. Programmable OTP options include an RC oscillator, EPROM protection, and automatic latch disable, as identified in the manufacturer family information. The Z8 architecture is designed for compact embedded control rather than high-throughput computing. Its 8-bit data path and 16 MHz operating clock are well suited to sequential control logic, signal conditioning, keypad and switch scanning, lamp or relay control, and communication-interface peripherals. Because program memory is one-time-programmable, the device is appropriate for production designs where a fixed firmware image is assigned during manufacturing. Typical uses include industrial control modules, test and measurement equipment, appliance controllers, building-control interfaces, and compact embedded systems. The PLCC-44 package also supports socket-based prototypes and serviceable assemblies, while a surface-mount implementation provides a compact permanent PCB footprint. The 4.5 V to 5.5 V supply range supports conventional 5 V logic systems. Designers should verify oscillator, timing, reset, and port requirements against the Z86E40 family documentation before schematic capture. OTP programming must be planned as a manufacturing step, and the permanent-programming decision should be reviewed against field-update requirements. The 44-pin PLCC footprint should also be checked for thermal performance and assembly compatibility. This product page consolidates the device specifications, verified source links, package characteristics, application guidance, and drop-in replacement status. It also distinguishes electrically similar devices that use different packages, preventing a footprint mismatch from being mistaken for a PCB-compatible replacement.

询价 联系我们
Z86E4312ASG - 8-Bit 12MHz OTP MCU | Zilog | LQFP-44
Z86E4312ASG

Z86E4312ASG - 8-Bit 12MHz OTP MCU | Zilog | LQFP-44

The Zilog Z86E4312ASG is an 8-bit Z8 microcontroller rated at 12 MHz, with 4 KB of one-time-programmable program memory, 236 bytes of RAM, and a 44-lead LQFP package measuring 10 mm by 10 mm. It operates from 3.5 V to 5.0 V and integrates 32 I/O lines, six interrupt sources, two timers, two comparators, a watchdog timer, power-on reset, and low-voltage protection. An 8-bit microcontroller is a compact processor designed to execute embedded control instructions, read sensor inputs, update outputs, and manage communication or timing functions. The Z8 family belongs to the broader hierarchy of embedded processors, microcontrollers, and programmable control semiconductors. Its one-time-programmable memory permits a finished device to be programmed once for its intended control application. The principal features of the Z86E4312ASG support space-constrained control systems requiring a moderate amount of program memory. Its 12 MHz operating speed provides processing capacity for sequential control tasks, while 32 I/O lines offer substantial connectivity for switches, indicators, sensors, actuators, and external bus devices. Six interrupts and two timers support event-driven operation, while the watchdog timer helps recover the controller after faults. The Z86E4312ASG also includes two analog comparators, power-on reset, and low-voltage protection. These resources reduce the need for separate peripheral devices in suitable systems. The EBI/EMI interface provides a route for external bus communication, allowing the controller to work with additional memory or peripheral circuits when the application requires more connectivity than the general-purpose I/O pins provide. Typical uses include industrial control panels, appliance controllers, small motor-control boards, security and access-control units, instrumentation, and embedded products with multiple discrete inputs and outputs. Its 4 KB OTP program memory is most appropriate for compact control loops, state machines, product selection logic, and supervisory functions rather than resource-intensive connectivity or graphics processing. When designing around this device, verify the 3.5 V to 5.0 V operating range against every external circuit and signal level. Treat the 236 bytes of RAM as a strict working-memory budget, and assign program memory carefully because OTP cannot be rewritten. PCB planning should preserve access to all 44 LQFP leads and provide suitable decoupling and signal-routing margins. This product page combines the Z86E4312ASG electrical specifications, package information, application guidance, design considerations, and a parameter-level comparison with closely related Zilog controllers. It is intended to help engineers assess memory, clock speed, package fit, peripheral requirements, and replacement strategy before releasing a production schematic or PCB design.

询价 联系我们
Z86E4312FSC - 8-Bit 12MHz OTP MCU | Zilog | Embedded Control
Z86E4312FSC

Z86E4312FSC - 8-Bit 12MHz OTP MCU | Zilog | Embedded Control

The Zilog Z86E4312FSC is an 8-bit CMOS Z8 OTP microcontroller rated for operation up to 12 MHz, with 4 KB of one-time-programmable program memory and a 44-LQFP package measuring 10 mm by 10 mm. The device is positioned for compact embedded-control designs that require deterministic peripheral integration and application-specific programming rather than field-upgradeable firmware storage. A microcontroller is the central control element of an embedded system. It executes firmware, reads inputs, updates outputs, and coordinates connected peripherals. The Z8 family combines an 8-bit processor architecture with OTP program memory, RAM, timers, and general-purpose I/O in one integrated circuit. OTP memory is programmed once during manufacturing or board assembly and cannot subsequently be erased or rewritten. The Z86E4312FSC combines a 12 MHz maximum operating frequency with 4 KB of OTP program memory. A secondary listing identifies 237 bytes of RAM, 24 I/O lines, and two 8-bit timers, while the product description identifies the device as a 4 KB, 12 MHz Z8 microcontroller. These characteristics make the part suitable for compact control products with modest code requirements and multiple digital interfaces. The device uses CMOS technology and is offered in a 44-LQFP surface-mount package. A 10 mm by 10 mm footprint supports compact PCB layouts but requires careful routing between its fine-pitch leads. Its listed I/O quantity and dual timer arrangement can reduce the need for external peripheral components in control, measurement, and actuator-interface systems where the application fits within the available program-memory capacity. Typical applications include industrial keypad and panel controllers, compact instrumentation, appliance control modules, programmable timers, and dedicated interface controllers. OTP programming is particularly appropriate for products whose firmware and configuration are fixed before deployment. For designs requiring field updates, the OTP limitation should be weighed against a controller using rewritable program memory. PCB design should preserve a clean return path around the clock, oscillator, reset, and power pins. Follow the manufacturer’s pin-description table and recommended application circuit when assigning tracks, placing bypass capacitors, and configuring the external crystal or clock source. This product record combines the exact Z86E4312FSC ordering information with package, memory, speed, and interface characteristics. It also highlights programming constraints, verified replacement status, and design considerations that help engineers determine whether this Z8 OTP microcontroller fits the target control system.

询价 联系我们
Z86E4312FSG - 12MHz 8-Bit MCU with 32 I/O | Zilog
Z86E4312FSG

Z86E4312FSG - 12MHz 8-Bit MCU with 32 I/O | Zilog

Zilog Z86E4312FSG is an 8-bit Z8 microcontroller with a 12 MHz maximum operating speed, 4 KB of one-time-programmable program memory, 236 x 8 bits of RAM, and 32 general-purpose I/O pins in a 44-LQFP 10 x 10 mm surface-mount package. It operates from a 3.5 V to 5.5 V supply and is specified for a 0°C to 70°C ambient temperature range. A microcontroller is a programmable semiconductor that combines a CPU core, nonvolatile program memory, volatile data memory, and peripherals on one integrated circuit. The Z8 family belongs to the 8-bit microcontroller hierarchy and provides a compact control platform for embedded products. Z86E4312FSG also supports EBI/EMI connectivity, Power-On Reset, and a Watchdog Timer, allowing it to supervise and control peripheral circuitry in compact industrial or consumer equipment. The device provides 4 KB organized as 4K x 8 bits of OTP program memory and 236 x 8 bits of RAM. Its internal oscillator eliminates the need for an external clock source in designs that can use the specified operating frequency. The 32 I/O pins provide substantial parallel interface capacity, while the 3.5 V to 5.5 V operating range suits conventional 5 V embedded-control equipment. The 44-LQFP package also supports programmed and PCB-manufactured production methods. The Z8 architecture targets straightforward embedded control, including digital input evaluation, output sequencing, timing, and communication. EBI/EMI connectivity expands the available interface options for external memory or related bus-connected functions. Power-On Reset establishes a controlled startup state, while the Watchdog Timer helps recover from unintended program stalls. These integrated resources reduce the number of external support components required for basic embedded-control designs. Typical uses include industrial automation controllers, appliance-control modules, instrumentation interfaces, and compact consumer products. The 32 I/O pins are particularly useful for keypad scanning, display-control signals, relay or switch inputs, status indicators, and external bus connections. The internal oscillator makes the MCU appropriate for cost-sensitive systems where an accurate external time base is not required. Designers should verify every electrical limit and pin function against the manufacturer datasheet before layout is released. OTP program memory is one-time programmable, so firmware validation must occur before programming. Decoupling, grounding, and exposed-pad layout should follow the datasheet recommendations. Because no verified pin names or detailed electrical limits were supplied, the package pinout and several implementation-specific values are intentionally left unresolved rather than guessed. This page combines the verified 12 MHz, 4 KB OTP, 236 x 8-bit RAM, 32 I/O, supply-voltage, temperature, and 44-LQFP specifications with practical application guidance. It also distinguishes the verified same-family alternative and identifies where additional datasheet information is required for a production release.

询价 联系我们