集成电路

DSPIC33FJ64GS406-I/MR

DSPIC33FJ64GS406-I/MR - 16-bit DSC, 64KB Flash, 50MIPS | Microchip

The Microchip Technology DSPIC33FJ64GS406-I/MR is a 16-bit digital signal controller (DSC) combining MCU and DSP engine cores, delivering 64KB of on-chip flash memory and 50 MIPS performance in a 64-pin VQFN (9x9 mm) package. It belongs to the GS series optimized for digital power conversion, integrating a high-speed PWM module, high-speed ADC, and analog comparators on a single die. A digital signal controller is a hybrid device that merges the control-flow convenience of a microcontroller (MCU) with the multiply-accumulate (MAC) throughput of a digital signal processor (DSP). Within the power-management semiconductor hierarchy, a DSC sits between a general-purpose MCU and a dedicated power-management IC, executing closed-loop control algorithms for switch-mode power supplies in real time. Key features include the high-speed PWM peripheral engineered for SMPS topologies, a high-speed analog-to-digital converter that can synchronize conversions to the PWM cycle, and multiple analog comparators for cycle-by-cycle current limiting. The device is currently listed by Microchip as In Production, and the industrial temperature suffix (-I) covers -40C to +85C operation. Architecturally, the dsPIC33FJ64GS406 pairs a modified Harvard 16-bit CPU with DSP instructions (MAC, DSP multiply) so that proportional-integral compensators and current-mode control loops execute with deterministic timing. The flash program memory is 64KB, sufficient for complex multi-loop control firmware including PFC stages, resonant converters, and digital ballast algorithms. According to the Microchip family data sheet (document 70000591f), the GS family devices specifically target common multi-loop digital switch-mode power supplies and digital power-conversion applications such as AC-to-DC converters, DC-to-DC converters, power factor correction, and uninterruptible power supplies. Typical applications include interleaved power factor correction (PFC) front ends - Microchip ships a reference design using this controller that accepts universal AC input and produces a single high-voltage DC output up to 350W - plus LLC and full-bridge DC-DC converters, solar micro-inverters, and server power supplies. A key design consideration: keep ICSP (PGECx/PGEDx) programming trace lengths short, and always use a matched PGECx/PGEDx pair - if PGEC2 carries ICSPCLK, ICSPDAT must connect to PGED2. All VDD/VSS pins must be connected and decoupled. This page synthesizes distributor pricing tiers, drop-in family alternatives, and practical digital-power design notes not found in the manufacturer data sheet.

询价联系我们

DSPIC33FJ64GS406-I/PT

DSPIC33FJ64GS406-I/PT - 16-bit DSC, 40MIPS, 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GS406-I/PT is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance with 64KB of flash program memory, operating from a 3V to 3.6V supply and housed in a 64-pin TQFP (PT) package rated for -40C to +125C industrial temperatures. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, the DSC sits between general-purpose MCUs and full DSPs: it offers Harvard-architecture dual-bus fetching, DSP multiply-accumulate instructions, and, in the GS family, purpose-built switch-mode power supply (SMPS) peripherals. This makes the dsPIC33FJ GS family the de-facto standard for fully digital power conversion, where control loops execute at switching frequencies of 100 kHz to 1 MHz. Key features of this part center on digital power conversion: a high-speed PWM module with complementary outputs, dead-time insertion, and fault protection; a high-speed 10-bit ADC capable of sampling multiple channels simultaneously with the PWM for tightly coupled control loops; and on-chip comparators. Peripherals supporting common multi-loop digital SMPS topologies include AC-DC converters, DC-DC converters, power factor correction (PFC), and uninterruptible power supplies, per the Microchip product page. The 16-bit dsPIC33F CPU core executes modified Harvard instructions with hardware multiply-accumulate, division assist, and 40 MIPS maximum operation at 3.3V. DMA channels move ADC results and PWM data without CPU intervention, freeing cycles for the control-law computation. Flash self-programming supports field firmware updates in deployed power supplies. Typical applications include interleaved power factor correction stages (Microchip's Interleaved PFC reference design produces 350W from universal AC input), server and telecom DC-DC bricks, solar micro-inverters, battery chargers, and uninterruptible power supply (UPS) control boards. The industrial temperature grade and 64 I/O-capable pin count suit multi-rail power systems. Design consideration: all VDD/VSS pairs must be decoupled, and ICSP programming requires using a matched PGECx/PGEDx pair - ICSPCLK and ICSPDAT must come from the same pair number. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

询价联系我们

DSPIC33FJ64GS406T-50I/MR

DSPIC33FJ64GS406T-50I/MR - 16-bit DSC, 50 MIPS, 64KB | Microchip

The Microchip Technology DSPIC33FJ64GS406T-50I/MR is a 16-bit digital signal controller (DSC) delivering 50 MIPS performance with 64KB (64K x 8) of FLASH program memory and 8KB of RAM, housed in a 64-pin VQFN (9x9 mm) package. A digital signal controller combines the computational throughput of a DSP engine with the peripheral integration and ease of use of a microcontroller, sitting in the hierarchy between a general-purpose MCU and a dedicated DSP. Within Microchip's power-management-oriented portfolio, the dsPIC33FJ GS family is purpose-built for switch-mode power supplies (SMPS), digital power conversion, and motor control, where fast control loops and high-resolution PWM are essential. Key features of this device include the 16-bit dsPIC33F core executing up to 50 MIPS, dedicated SMPS peripherals including high-resolution PWM modules with dead-time control, quadrature encoder interface (QEI) inputs, 4 DMA channels, 7 timers, and 2 serial I/O ports. The industrial temperature rating (-40C to +85C, suffix I) suits harsh operating environments, and the T suffix denotes tape-and-reel packaging for automated assembly. The GS-series architecture integrates the SMPS PWM peripheral directly onto the core's internal bus, enabling sub-microsecond control-loop latency in peak-current-mode and voltage-mode converters. Fast ADC sampling synchronized to the PWM reduces jitter and improves transient response in digitally controlled power stages. Typical applications include interleaved power factor correction (PFC) - as demonstrated by Microchip's 350W Interleaved PFC reference design - LLC and half-bridge converters, digital LED drivers, and BLDC/PMSM motor control. The QEI peripheral and PWM channels make it a natural fit for servo and traction drives. Design consideration: place the ICSP (PGECx/PGEDx) traces as short as possible per Microchip's programming guidelines, and budget flash headroom - 64KB is sufficient for most control laws but tight for designs adding communication stacks and bootloaders. This page synthesizes distributor data, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet. Pricing shown is as of 2026-09-27.

询价联系我们

DSPIC33FJ64GS406T-50I/PT

DSPIC33FJ64GS406T-50I/PT - 16-bit DSC 50 MIPS SMPS PWM | Microchip

The Microchip DSPIC33FJ64GS406T-50I/PT is a 16-bit digital signal controller (DSC) delivering 50 MIPS performance with 64KB of Flash memory and 8KB of RAM, housed in a 64-pin TQFP (10x10 mm) surface-mount package operating from a 3.3V supply. A digital signal controller combines the computational throughput of a DSP core with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, the DSC sits above a general-purpose MCU as the control element of digital power conversion systems, replacing analog control loops with firmware-executed proportional-integral compensators running at switching frequencies of hundreds of kilohertz. Key features of this SMPS-focused family member include dedicated high-speed PWM modules with complementary outputs, dead-time control and fault protection, a high-speed 10-bit ADC with multiple sample-and-hold circuits able to sample multiple channels simultaneously, analog comparators, and a quadrature encoder interface (QEI) for motor feedback. The 50 MIPS core throughput allows single- or multi-loop digital power control with deterministic loop timing. Architecturally, the dsPIC33F core uses a modified Harvard pipeline with DSP multiply-accumulate instructions, enabling fast execution of control-law and filter calculations. Programming is via ICSP using tools such as the PICkit or ICD families, and the same family software libraries (SMPS firmware frameworks) carry across pin-compatible GS-series variants, reducing migration risk. Typical applications include AC-DC converters, DC-DC converters, power factor correction (PFC) stages, uninterruptible power supplies, and digital lighting or battery chargers, where the SMPS PWM and ADC combination replaces dedicated analog controllers. The QEI also suits digital motor control. For design, use Microchip's interleaved PFC reference design as a proven starting point, and verify PWM dead-time and ADC trigger timing against your switching frequency. This page synthesizes distributor pricing, same-brand drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

询价联系我们

DSPIC33FJ64GS606-50I/MR

DSPIC33FJ64GS606-50I/MR - 16-bit 50MIPS SMPS DSC | Microchip

The Microchip Technology DSPIC33FJ64GS606-50I/MR is a 16-bit digital signal controller (DSC) delivering 50 MIPS performance with 64KB of Flash program memory and 9KB of RAM, housed in a 64-pin VQFN (9x9 mm) package with an exposed thermal pad, rated for operation from -40C to +85C. A digital signal controller combines the computational core of a microcontroller with the arithmetic acceleration of a digital signal processor in a single chip. Within the embedded systems hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP, providing deterministic interrupt latency, hardware multiply-accumulate units, and specialized power-conversion peripherals. The dsPIC33FJ family from Microchip targets real-time control, with the GS series specifically architected for digital switch-mode power supplies. Key differentiating features include a dedicated high-speed SMPS PWM module with complementary outputs and dead-time control, 2 quadrature encoder interfaces (QEI) for motor feedback, an on-chip CAN 2.0B controller for industrial networking, 4 high-speed analog comparators, an on-chip DAC, and a fast 10-bit ADC with multiple sample-and-hold circuits tailored for current sensing in power supplies. Architecturally, the device uses a modified Harvard 16-bit core with DSP instruction extensions, a barrel shifter, multiple internal bus architecture, 4 DMA channels supporting 7 timers, 2 serial I/O ports, and IEEE 1149.2-compatible JTAG boundary scan for test. In-Circuit Serial Programming (ICSP) and In-Application Programming allow firmware updates without removing the device from the board. Typical applications include AC-DC and DC-DC digital power supplies, interleaved power factor correction (PFC) converters, solar micro-inverters, battery chargers, and digital lighting ballasts, where the SMPS PWM module provides cycle-by-cycle control and the comparators implement fast overcurrent protection without CPU intervention. When designing with this device, budget the 3.3V supply and place the exposed pad on a solid ground plane for thermal and EMI performance; also reserve one PGECx/PGEDx pair for ICSP debugging with short traces. This page synthesizes verified distributor data, drop-in alternatives within the GS family, and practical design guidance not found in the manufacturer datasheet.

询价联系我们

DSPIC33FJ64GS606-50I/PT

DSPIC33FJ64GS606-50I/PT - 16-bit DSC 50MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GS606-50I/PT is a 16-bit Digital Signal Controller (DSC) delivering 50 MIPS performance with 64 KB of Flash program memory and 9 KB of RAM, housed in a 64-pin TQFP (10x10 mm) surface-mount package rated for industrial temperatures from -40C to +85C. A Digital Signal Controller combines the computational architecture of a digital signal processor (DSP) - including a barrel shifter, multiply-accumulate (MAC) hardware, and multiple internal buses - with the peripheral integration and control flexibility of a microcontroller (MCU). The dsPIC33F family from Microchip sits within the broader 16-bit microcontroller hierarchy and is purpose-built for embedded control tasks that also require fast mathematical processing, such as digital power conversion and motor control. Key differentiating features of the DSPIC33FJ64GS606 include a high-speed PWM module purpose-designed for switch-mode power supplies (SMPS), a high-speed on-chip ADC for simultaneous sampling of multiple channels, and integrated analog comparators - a combination that allows a single chip to close digital control loops for power converters. The device also integrates 4 DMA channels and 7 timers, offloading data movement from the CPU core. Architecturally, the dsPIC33F core supports boundary scan (JTAG) for board-level test, multiple low-power modes, and In-Circuit Serial Programming (ICSP) via the PGECx/PGEDx pins, simplifying field upgrades and debugging with tools such as the MPLAB ecosystem. Typical applications include digital power supplies, interleaved power factor correction (PFC) stages - for which Microchip provides a dedicated reference design - uninterruptible power supplies (UPS), battery chargers, and embedded motor control. When designing with this device, keep ICSP programming trace lengths short and budget the 3.0 V to 3.6 V supply rail carefully for the analog peripherals. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design guidance not consolidated in the manufacturer datasheet.

询价联系我们

DSPIC33FJ64GS606-E/MR

DSPIC33FJ64GS606-E/MR - 16-bit DSC 40MIPS 64KB | Microchip

The Microchip Technology DSPIC33FJ64GS606-E/MR is a 16-bit digital signal controller (DSC) delivering 40 MIPS from 64KB (64K x 8) of Flash program memory and 9.216KB of RAM, housed in a 64-pin VQFN (9x9 mm, MR) package with exposed pad and an extended -40C to +125C temperature rating (E suffix). A digital signal controller combines the compute power of a DSP engine with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, a DSC sits between general-purpose MCUs and dedicated digital power ICs: it executes closed-loop control algorithms for switch-mode power conversion while integrating the analog and timing peripherals those loops require. The dsPIC33F family is Microchip's 16-bit DSC line purpose-built for digital power. Key features include a high-speed 16-bit PWM module with complementary outputs and dead-time control, a high-speed 10-bit ADC, analog comparators, four DMA channels, a barrel shifter DSP engine, and boundary-scan (JTAG-capable) debug support. The supply range is 3V to 3.6V (single 3.3V rail), and the operating frequency reaches 40 MIPS, sufficient for multi-loop digital power control at practical switching frequencies. Architecturally, the device pairs a 16-bit RISC CPU with a DSP multiply-accumulate engine and multiple internal buses, allowing control-law computation (PI/PID compensation) to run in parallel with PWM update and ADC sampling. AEC-Q100 and TS 16949 alignment per Microchip USA reporting makes it suitable for automotive-adjacent and industrial power designs. Typical applications are AC-to-DC converters, DC-to-DC converters, power factor correction (PFC), uninterruptible power supplies (UPS), and solar inverters, where multi-loop SMPS control benefits from the integrated high-speed PWM and fast ADC sampling. Design consideration: budget the 3.3V supply decoupling carefully and verify ADC sampling-to-PWM-update latency against your switching frequency; extended-temperature designs should also account for Flash endurance and retention derating above 105C. This page adds value beyond the datasheet with drop-in alternative cross-references, distributor pricing tiers as of 2026-09-27, and practical digital-power design notes compiled for engineers and buyers.

询价联系我们

DSPIC33FJ64GS606-I/MR

DSPIC33FJ64GS606-I/MR - 16-bit DSC 40MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GS606-I/MR is a 16-bit digital signal controller (DSC) delivering up to 40 MIPS at 40 MHz with 64 KB of flash program memory and 9216 words of RAM, housed in a lead-free plastic QFN-44 package measuring 8 x 8 mm. A digital signal controller combines the compute throughput of a digital signal processor (DSP) with the peripheral integration and deterministic control of a microcontroller (MCU). Within the power-management hierarchy, the dsPIC33FJ GS family sits at the top: microcontroller -> digital signal controller -> digital power controller. The GS subfamily is purpose-built for switch-mode power supply (SMPS) control, where deterministic interrupt latency and specialized analog peripherals matter more than general-purpose I/O volume. Key features include a high-speed PWM module purpose-designed for multi-loop power conversion, a high-speed ADC for current- and voltage-loop sampling, and integrated analog comparators that offload cycle-by-cycle current limiting from software. The device provides 8 timers, 4 DMA channels, and 2 serial I/O ports, with in-circuit (ICSP) and in-application programming plus IEEE 1149.2-compatible JTAG boundary scan for production programming and board-level test. Architecturally, the CMOS 16-bit core executes DSP-class multiply-accumulate instructions for control-law computation (PID, 3P3Z compensators), supporting multiple internal bus architectures that keep instruction fetch, data access, and DMA transfers from contending. Supply voltage is 3 V to 3.6 V, and the -I temperature grade covers -40C to +85C for industrial environments. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, uninterruptible power supplies (UPS), and multi-loop digital SMPS designs. Microchip provides an interleaved PFC reference design specifically for this SMPS dsPIC family. Design consideration: the QFN package exposes its ground pad beneath the die; a solid VSS grid and thermal via array under the package are essential for signal integrity in high dv/dt power environments. This page synthesizes verified distributor pricing, drop-in family alternatives, and practical design guidance not consolidated in the manufacturer datasheet.

询价联系我们

DSPIC33FJ64GS606-I/PT

DSPIC33FJ64GS606-I/PT - 16-bit DSC, 40 MIPS, 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GS606-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33F GS family, delivering up to 40 MIPS at 3.3V with 64KB of Flash program memory, 9216 words of RAM, and a high-speed PWM module purpose-built for digital power conversion, housed in a 64-pin TQFP (10x10 mm) package with industrial -40C to +85C temperature grade. A digital signal controller combines the compute throughput of a DSP core with the deterministic peripheral set of a microcontroller. Within the power-management hierarchy, the DSC sits above a plain MCU for control-loop tasks: it executes Proportional-Integral-Derivative (PID) and predictive control loops for switch-mode power supplies (SMPS) at switching frequencies of hundreds of kilohertz, where a general-purpose MCU would struggle to close the loop within one PWM period. Hypernyms include DSC -> MCU -> embedded controller -> semiconductor. The GS sub-family is explicitly designed by Microchip for multi-loop digital SMPS topologies. Key features include a modified Harvard 16-bit DSP engine with single-cycle MAC and dual operand fetch, dedicated high-speed PWM peripherals with complementary outputs and dead-time control, high-speed analog-to-digital converters tightly coupled to the PWM for minimum loop latency, four DMA channels, multiple UART/SPI/I2C interfaces, and on-chip analog comparators that support cycle-by-cycle current limiting without external circuitry - essential for peak-current-mode converters. The architecture concurrently fetches two data operands from memory while multiplying two W registers and accumulating the result in a single cycle, per the Microchip datasheet. PWM resolution is configurable up to 16-bit at lower switching frequencies and the 4-input high-speed ADC supports up to 4 Msps throughput when the converter is switched. The comparator and PWM synchronization enables sub-microsecond hardware-level fault response. The /PT suffix denotes the 64-pin TQFP surface-mount package, while the -I suffix indicates industrial temperature grade. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, uninterruptible power supplies (UPS), solar inverters, and digital welding power sources. Microchip's Interleaved PFC reference design, producing up to 350W from universal AC input, is based on this family. Design consideration: verify 3.3V rail sequencing before VDD reaches 5V at ICSP (PGECx/PGEDx) and trace length per the datasheet layout guidance. This page synthesizes verified distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

询价联系我们

DSPIC33FJ64GS606T-50I/PT

DSPIC33FJ64GS606T-50I/PT - 16-bit 50MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GS606T-50I/PT is a 16-bit digital signal controller (DSC) delivering 50 MIPS performance with 64KB of flash memory and 9KB of RAM, housed in a 64-pin TQFP (10x10 mm) surface-mount package rated for -40C to +85C industrial operation at 3.3V. A digital signal controller combines the computational throughput of a DSP core with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP, making it the preferred device class for closed-loop digital switch-mode power supplies (SMPS) where fast control loops, high-resolution PWM and on-chip analog are all mandatory. Key differentiating features of the GS606 include dedicated SMPS PWM modules with high resolution for precise duty-cycle control, two quadrature encoder interface (QEI) inputs for motor feedback, an on-chip CAN module for system communication, a DAC for reference generation, and four analog comparators for fast overcurrent and cycle-by-cycle protection. Per Microchip product data, the device enumerates as a 16-bit DSC with 64KB Flash, 9KB RAM, 50 MHz operation, SMPS PWM, 2 QEI, CAN, DAC and 4 comparators. Architecturally, the dsPIC33F core pairs a modified Harvard 16-bit pipeline with DSP multiply-accumulate instructions, allowing single-cycle MAC operations in control-loop interrupt service routines. The deep analog integration lets the GS606 close voltage and current loops entirely on-chip, reducing external component count and board area. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, uninterruptible power supplies, and digitally controlled lighting or motor-drive power stages, as cited on the Microchip dsPIC33FJ64GS606 product page. Design consideration: budget the PWM resolution against the instruction clock and verify comparator response times for your overcurrent trip threshold; the TQFP thermal pad-free package requires solid ground pours for high-frequency switching layouts. This page synthesizes distributor availability data, same-family drop-in options, and digital-power design notes not consolidated on the manufacturer product page.

询价联系我们

DSPIC33FJ64GS606T-I/MR

DSPIC33FJ64GS606T-I/MR - 16-bit 40MIPS DSC 64KB | Microchip

The Microchip Technology DSPIC33FJ64GS606T-I/MR is a 16-bit digital signal controller (DSC) from the dsPIC33F GS family, delivering 40 MIPS performance with 64 KB (64K x 8) of program flash memory and 9216 words of RAM, housed in a 64-pin VQFN (MR) package with exposed thermal pad operating at 3.3V. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and control flexibility of a microcontroller. Within the power-management hierarchy, a DSC sits above a standard MCU for closed-loop control tasks: it executes control loops fast enough for switch-mode power conversion while integrating specialized analog and timing peripherals on one die. Key features include a high-speed PWM module purpose-built for digital switch-mode power supplies (SMPS), a high-speed 10-bit ADC with multiple sample-and-hold circuits for simultaneous multi-rail sampling, analog comparators, and four DMA channels. The device supports In-Circuit Serial Programming (ICSP) and debugging via PGECx/PGEDx pins, plus boundary-scan capability and low-power modes. Technically, the dsPIC33FJ64GS606 core pairs a 16-bit modified Harvard architecture with DSP engine instructions (fixed-point format, barrel shifter), letting a single device run a PFC loop and downstream DC-DC loops concurrently. Peripheral pin-select and rich timer resources reduce external glue logic in compact power supplies. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, uninterruptible power supplies, and digital lighting ballasts. The GS family was explicitly designed by Microchip for these multi-loop digital power-conversion applications. Design consideration: keep the ICSP connector trace lengths to PGECx/PGEDx as short as possible for reliable in-circuit debugging, and verify that the 40 MIPS grade (-I, industrial temperature) matches your switching-frequency headroom; a 50 MIPS variant exists if more loop bandwidth is required. This page synthesizes distributor pricing, drop-in alternatives, pinout guidance, and practical design notes not consolidated in the manufacturer datasheet.

询价联系我们

DSPIC33FJ64GS606T-I/PT

DSPIC33FJ64GS606T-I/PT - 16-bit DSC 40MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GS606T-I/PT is a 16-bit Digital Signal Controller (DSC) delivering up to 40 MIPS from 64KB of Flash program memory with 9KB of RAM, housed in a 64-lead TQFP (10x10 mm) surface-mount package operating from a 3.3V supply. A Digital Signal Controller combines the computational power of a digital signal processor with the peripheral integration and control architecture of a microcontroller, sitting between an MCU and a DSP in the embedded hierarchy. In the digital power domain, DSCs replace analog control loops with firmware-executed PID compensators, enabling programmable, adaptive switch-mode power supplies. The GS606 variant is purpose-built for digital power conversion: it integrates a high-speed PWM module with multiple output pairs, complementary outputs, dead-time control, and fault inputs, alongside a high-speed 10-bit ADC with simultaneous multi-channel sampling and analog comparators. These peripherals allow a single device to close both the fast inner current loop and the slower outer voltage loop in SMPS topologies. The device also provides 8 timers, 4 DMA channels, and serial communication interfaces (UART, SPI, I2C) per the distributor-listed feature set. Architecturally, the dsPIC33F core uses a 16-bit modified Harvard pipeline with DSP instructions (MAC, multiply) and two 40-bit accumulators, sustaining 40 MIPS operation. In-Circuit Serial Programming (ICSP) via PGECx/PGEDx pins supports field updates, and Microchip recommends short ICSP traces on the PCB. Typical applications include AC-DC converters, DC-DC converters, Power Factor Correction (PFC) stages, uninterruptible power supplies (UPS), solar inverters, LED drivers, and high-performance motor control, where high-speed analog acquisition and flexible PWM are mandatory. For design, budget the 3.3V rail carefully and route PWM outputs with controlled edge rates to limit switching-node ringing; dead-time settings must be validated against MOSFET gate-charge specifications to prevent shoot-through. This page synthesizes verified distributor listings, datasheet-family cross references, and digital-power design guidance not consolidated on typical catalog pages.

询价联系我们

DSPIC33FJ64GS608-50I/PT

DSPIC33FJ64GS608-50I/PT - 16-bit 50MIPS DSC | Microchip

The Microchip Technology DSPIC33FJ64GS608-50I/PT is a 16-bit digital signal controller (DSC) combining MCU ease of use with DSP performance, delivering 50 MIPS from a dsPIC33F core with 64KB (64K x 8) Flash program memory and 9KB RAM, housed in an 80-pin TQFP (12x12 mm) package. A digital signal controller is a hybrid semiconductor that merges the control peripherals of a microcontroller with the computational throughput of a digital signal processor. Within the power-management semiconductor hierarchy, the DSC sits above general-purpose MCUs and below dedicated DSPs, making it the preferred controller class for closed-loop digital power conversion where fast, deterministic control loops are required. Key differentiating features include the high-speed PWM module with special SMPS operating modes, a high-speed 10-bit ADC with multiple sample-and-hold circuits, and on-chip analog comparators - a peripheral set purpose-built for multi-loop digital switch-mode power supplies (SMPS). The device also provides 2 QEI modules, a CAN controller, DAC outputs, and 4 DMA channels for efficient data movement. Architecturally, the dsPIC33F core executes DSP instructions (MAC, barrel shifter) with dual operands fetched in a single cycle, enabling digital filter algorithms and high-precision control-loop computations at 50 MIPS. Extended-temperature variants such as the /50E grade and industrial (-40C to +85C) /50I grade share the same die and peripheral map. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, uninterruptible power supplies (UPS), and digital lighting or battery-charging power stages. Design consideration: connect every VDD/VSS pair and pair PGECx/PGEDx consistently for ICSP programming - the device has multiple ICSP pin pairs that must be used as matched pairs. This page synthesizes distributor pricing, drop-in same-footprint alternatives, and practical design notes not found in the manufacturer datasheet, with pricing referenced as of 2026-09-27.

询价联系我们

DSPIC33FJ64GS608-I/PT

DSPIC33FJ64GS608-I/PT - 16-bit DSC 40MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GS608-I/PT is a 16-bit Digital Signal Controller (DSC) delivering 40 MIPS performance with 64KB (64K x 8) of Flash program memory, operating from a 3V to 3.6V supply in an 80-pin TQFP (12x12 mm) surface-mount package rated from -40C to +85C. A Digital Signal Controller combines the compute throughput of a Digital Signal Processor (DSP) with the peripherals, ease of use, and interrupt structure of a microcontroller (MCU). Within the power-management hierarchy, the dsPIC33F GS family sits at the controller layer of a digital switch-mode power supply (SMPS), executing the control loop that a dedicated analog controller would otherwise implement in hardware. The GS series is purpose-built for digital power conversion: it integrates high-speed PWM peripherals, high-speed ADC and analog comparators, the core building blocks for multi-loop SMPS control. According to Microchip product documentation, these devices support AC-to-DC converters, DC-to-DC converters, Power Factor Correction (PFC), and uninterruptible power supplies (UPS). The 40 MIPS dsPIC33F core is designed to execute digital filter algorithms, high-speed precision digital control loops, and digital audio and speech processing. Its DSP engine supports MAC-class instructions that enable the tight, deterministic loop timing required by peak-current-mode and voltage-mode converters switching at hundreds of kilohertz. In-Circuit Serial Programming (ICSP) via PGECx/PGEDx pin pairs allows field firmware updates without removing the device from the board. Typical applications include interleaved PFC front ends (Microchip publishes a 350W interleaved PFC reference design for this family), telecom and server DC-DC bricks, solar micro-inverters, UPS inverter control, and battery chargers. Design consideration: all VDD/VSS pairs must be decoupled and connected, and the ICSP PGECx/PGEDx pair must be routed as a matched pair with short traces to the programming connector; using PGEC2 for ICSPCLK requires PGED2 for ICSPDAT. This page adds value beyond the datasheet by synthesizing distributor pricing, drop-in family alternatives, cross-reference guidance, and practical design notes in one place.

询价联系我们

DSPIC33FJ64GS608T-50I/PT

DSPIC33FJ64GS608T-50I/PT - 16-bit DSC 50MIPS 64KB | Microchip

The Microchip Technology DSPIC33FJ64GS608T-50I/PT is a 16-bit digital signal controller (DSC) delivering 50 MIPS performance with 64KB of Flash memory and 9KB of RAM, housed in an 80-pin TQFP surface-mount package rated for -40C to +85C operation from a 3V to 3.6V supply. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and control-friendly architecture of a microcontroller. Within the power-management hierarchy, the dsPIC33FJ GS family sits above generic MCUs for digital power tasks: its instruction set supports fast PID and compensator loops, while dedicated high-speed PWM hardware closes control loops without CPU intervention. This makes DSCs the de-facto standard for digitally controlled switch-mode power supplies and power factor correction stages. Key features include dedicated high-speed PWM peripherals with complementary outputs, dead-time control and fault protection tailored for SMPS topologies; on-chip high-speed ADC modules synchronized to the PWM for cycle-by-cycle sampling; multiple analog comparators for overcurrent and overvoltage protection; CAN for industrial communication; DAC channels and QEI inputs for motion-oriented power conversion. The 50 MIPS core executes one instruction per cycle, allowing multi-loop control schemes in a single device. Architecturally, the device uses a modified Harvard 16-bit core with DSP multiply-accumulate instructions, separate program and data buses, and hardware looping. The Flash-based program memory supports in-circuit self-programming, and the supply range of 3.0V to 3.6V matches standard 3.3V rails. According to Microchip product documentation, the family explicitly targets AC to DC converters, DC to DC converters, power factor correction, and uninterruptible power supplies. Typical applications include digitally controlled AC-DC power supplies, interleaved PFC front ends, DC-DC converters, UPS systems, solar inverters, battery chargers, and LED drivers, where the PWM-ADC-comparator pipeline handles fast current-mode control while the CPU executes slower voltage and system loops. Design consideration: keep the 3.3V supply within the 3.0V to 3.6V window, decouple all VDD/VDDCORE pins with low-ESR ceramics close to the TQFP, and route PWM outputs away from analog ADC inputs to preserve conversion accuracy. This page synthesizes distributor pricing, drop-in alternatives, design notes, and comparison data not found on the manufacturer product page alone.

询价联系我们

DSPIC33FJ64GS610-50I/PT

DSPIC33FJ64GS610-50I/PT - 16-bit DSC 50MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GS610-50I/PT is a 16-bit digital signal controller (DSC) delivering 50 MIPS performance with 64KB Flash program memory and 9KB RAM, housed in a 100-pin TQFP (12x12 mm) package with industrial temperature rating of -40C to +85C. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and control architecture of a microcontroller. Within the power management hierarchy, DSCs such as the dsPIC33FJ64GS610 sit between general-purpose MCUs and dedicated power controllers, providing deterministic execution for closed-loop switch-mode power supply (SMPS) control loops running at hundreds of kilohertz. Key features include a dedicated SMPS PWM module optimized for power conversion, four high-speed comparators, an on-chip DAC, two quadrature encoder interfaces (QEI), a CAN 2.0B controller, and four DMA channels. The 16-bit modified Harvard architecture includes DSP engine instructions (MAC, barrel shifter) enabling fast execution of proportional-integral control algorithms without external assistance. The device is designed specifically for digital power applications: the high-resolution PWM module supports complementary outputs, dead-time insertion, and fault protection required by LLC, half-bridge, full-bridge, and boost topologies. IEEE 1149.2-compatible JTAG boundary scan and In-Circuit Serial Programming (ICSP) via PGECx/PGEDx pins simplify production programming and board-level test. Typical applications include interleaved power factor correction (PFC), digital AC-DC and DC-DC converters, solar inverters, battery chargers, UPS systems, and industrial motor drives where sensor feedback loops demand DSP-class throughput. For design, keep ICSP trace lengths short per the Microchip datasheet recommendation, and budget the 3.3V supply with adequate decoupling across the 100-pin TQFP. This page consolidates verified specifications, drop-in alternatives, application guidance, and distributor sourcing data in one place - information not assembled in the manufacturer datasheet alone.

询价联系我们

DSPIC33FJ64GS610-E/PT

DSPIC33FJ64GS610-E/PT - 16-bit 40MIPS DSC, 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GS610-E/PT is a 16-bit digital signal controller (DSC) delivering 40 MIPS of performance with 64 KB (64K x 8) of Flash program memory, packaged in a 100-pin TQFP (PT, 12x12 mm) surface-mount form factor. It operates from a 3.0 V to 3.6 V supply and is rated for the extended temperature range of -40C to +125C, and is part of the AEC-Q100-capable dsPIC33FJ64GS610 SMPS family. A digital signal controller (DSC) combines the computational throughput of a DSP with the peripheral integration and control architecture of a microcontroller. Within the embedded power-management hierarchy, a DSC sits at the top of the digital control chain: it executes closed-loop control firmware that drives power stages such as PFC boost stages, full-bridge DC-DC converters, and photovoltaic inverters, replacing legacy analog compensators with deterministic software compensation. Key features include the high-speed SMPS-optimized PWM module with complementary outputs and programmable dead time, a 10-bit high-speed ADC capable of simultaneous multi-channel sampling for current- and voltage-loop acquisition, and integrated analog comparators for cycle-by-cycle current limiting. The -E temperature grade and AEC-Q100 association make the part suitable for harsh industrial and automotive-adjacent environments, while 40 MIPS of 16-bit DSP throughput with single-cycle hardware multiply accelerates the current-loop execution that determines converter bandwidth. The architecture targets multi-loop digital power conversion: the PWM and ADC modules are tightly coupled so that ADC conversion triggers can be synchronized to PWM edges, minimizing control-loop latency. Four DMA channels, JTAG boundary-scan debug, and a rich interrupt structure round out the system integration expected for power-conversion firmware. Typical applications include AC-DC converters, isolated DC-DC converters, power factor correction (PFC) stages, uninterruptible power supplies (UPS), and solar micro-inverters, where the high-speed PWM resolution directly improves converter efficiency and transient response. Design consideration: this is a 3.3 V core part - confirm the 3.0-3.6 V supply range fits your power tree, and budget Flash/RAM headroom because 64 KB program Flash and the RAM partition are fixed for this SKU. Verify MSL handling for the TQFP package before reflow. This page synthesizes distributor pricing, drop-in same-footprint alternatives, and practical design notes not found in the manufacturer datasheet.

询价联系我们

DSPIC33FJ64GS610-I/P

DSPIC33FJ64GS610-I/P - 16-bit DSC 40MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GS610-I/P is a high-performance 16-bit Digital Signal Controller (DSC) delivering up to 40 MIPS from a 64 KB Flash program memory and 9216 words of RAM, supplied at 3.0V to 3.6V and housed in a 100-pin TQFP (14x14 mm, 0.4 mm pitch) surface-mount package. A Digital Signal Controller combines the compute throughput of a DSP engine with the peripheral integration and deterministic control of a microcontroller. Within the power-management semiconductor hierarchy, a DSC sits above a general-purpose MCU for closed-loop control tasks and below a full application processor, occupying the sweet spot for real-time switch-mode power supply (SMPS) control loops that require fast, cycle-accurate PWM and ADC interaction. Key features include a dedicated high-speed PWM module with complementary outputs and dead-time control, a high-speed 10/12-bit ADC, and integrated analog comparators - the exact peripheral trio required for voltage-mode, current-mode, and multi-loop digital power conversion. The device also provides In-Circuit Serial Programming (ICSP), in-application programming, two program and two complex data breakpoints, and IEEE 1149.2-compatible (JTAG) boundary scan for production test. Architecturally, the dsPIC33FJ GS family couples a 16-bit modified Harvard core with DSP multiply-accumulate instructions, allowing single-cycle MAC operations for filter and control-law computation. Industrial operating temperature (-40C to +85C) and a CMOS process support demanding embedded environments. Typical applications include AC-DC converters, DC-DC converters, power factor correction (PFC) stages, uninterruptible power supplies (UPS), and solar/LED power systems where deterministic multi-loop control is mandatory. For design, place the ICSP connector traces (PGECx/PGEDx) as short as possible, per the Microchip datasheet, and pair any PWM/ADC pin usage with proper analog grounding around the comparators. This page adds value beyond the manufacturer datasheet by synthesizing distributor availability data, same-package drop-in alternatives, practical design notes, and pricing context in one citable reference.

询价联系我们

DSPIC33FJ64GS610-I/PF

DSPIC33FJ64GS610-I/PF - 16-bit DSC 40 MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GS610-I/PF is a high-performance 16-bit Digital Signal Controller (DSC) delivering up to 40 MIPS from a CMOS core with 64KB (64K x 8) of FLASH program memory and 9216 words of RAM, housed in a 100-pin TQFP (14x14 mm, 0.4 mm terminal pitch) surface-mount package. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and deterministic control of a microcontroller. Within the power-management IC hierarchy, a DSC sits above a general-purpose MCU for closed-loop control tasks: it samples feedback with fast analog-to-digital converters, executes control-loop mathematics, and drives power stages through dedicated PWM hardware. The dsPIC33F family is Microchip's 16-bit DSC platform, and the GS series is its switch-mode power supply (SMPS) optimized subset. Key features of the DSPIC33FJ64GS610 include the 40 MIPS 16-bit core, 64KB self-programming FLASH, 3.0V to 3.6V single-supply operation, industrial temperature rating (-40C to +85C), and peripheral sets purpose-built for digital power: high-resolution PWM modules, fast analog comparators and ADCs for current-mode control, plus multiple UART, SPI and I2C ports for supervisory communication. In-Circuit Serial Programming (ICSP) via PGECx/PGEDx pin pairs enables field firmware updates. Architecturally, the device pairs a 16-bit modified Harvard core with DSP instructions (MAC, DSP multiply) so that proportional-integral and predictive control loops execute in single-microsecond budgets, a decisive advantage over software-timed 8-bit MCUs in converters switching at 100 kHz and above. Typical applications include AC-DC converters, DC-DC converters, power factor correction (PFC) stages - including interleaved PFC reference designs up to 350W - and uninterruptible power supplies (UPS), where the SMPS-focused peripherals directly implement voltage-mode, current-mode and multi-loop control. Design consideration: use a PGECx/PGEDx pair consistently (for example PGEC2 with PGED2) for ICSP and debugging, and keep ICSP traces short per the Microchip datasheet layout guidance. This page synthesizes distributor pricing, pin-compatible family alternatives, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-09-27.

询价联系我们

DSPIC33FJ64GS610T-50I/PF

DSPIC33FJ64GS610T-50I/PF - 16-bit 50MIPS DSC 64KB Flash | Microchip

The Microchip DSPIC33FJ64GS610T-50I/PF is a 16-bit dsPIC33F digital signal controller (DSC) delivering 50 MIPS performance with 64KB (64K x 8) FLASH program memory and 9KB RAM, housed in a 100-pin TQFP (14x14 mm) surface-mount package. A digital signal controller combines the control flow of a microcontroller (MCU) with the computational throughput of a digital signal processor (DSP) in a single device. Within the power-management hierarchy, a DSC such as the dsPIC33FJ64GS610 sits between a general-purpose MCU and a dedicated digital power IC, executing real-time control loops for switching power supplies and motor drives while also managing housekeeping, communication, and user-interface tasks. Key differentiating features include dedicated SMPS PWM peripherals, 2 quadrature encoder interface (QEI) modules, a CAN 2.0B controller, a 10-bit DAC, and 4 analog comparators, making this one of the few 16-bit controllers purpose-built for digital power conversion. The industrial temperature grade (-40C to +85C, denoted by the I suffix) suits demanding factory and power-infrastructure environments. Architecturally, the dsPIC33F core pairs a 16-bit pipelined CPU with DSP instruction extensions (single-cycle MAC, dual operand fetch), enabling deterministic execution of Proportional-Integral-Derivative (PID) and predictive control loops at loop rates far above what conventional MCUs achieve. High-resolution PWM modules support complementary outputs, dead-time insertion, and fault shutdown - the classic requirements of half-bridge and full-bridge power stages. Typical applications include switched-mode power supplies (SMPS) with active Power Factor Correction, DC-DC converters, digital lighting ballasts, and battery chargers. Microchip's Interleaved PFC reference design, delivering up to 350W from a universal input range, is based directly on this device family. When designing with this part, budget the peripheral pin map early - the 100-pin TQFP provides the port fan-out needed for multiple PWM channels plus CAN and QEI simultaneously, but remappable pin assignment must be planned to avoid routing conflicts. This page synthesizes distributor pricing context, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet. Pricing references are as of 2026-09-27.

询价联系我们

DSPIC33FJ64GS610T-50I/PT

DSPIC33FJ64GS610T-50I/PT - 16-bit 50MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GS610T-50I/PT is a 16-bit digital signal controller (DSC) delivering up to 50 MIPS from a dsPIC33F core, with 64KB of FLASH program memory and 9KB of RAM, housed in a 100-pin TQFP (12x12 mm) package rated from -40C to +85C at 3.0V to 3.6V operation. A digital signal controller combines the compute throughput of a DSP engine (single-cycle MAC, DSP multiply, hardware divide support) with the deterministic control peripherals of a microcontroller. Within the power-management hierarchy, the dsPIC33FJ64GS610 belongs to Microchip's SMPS-focused family: DSC -> digital signal controller -> 16-bit MCU -> embedded processor, purpose-built to close multi-loop digital control of switch-mode power supplies in software. Key features include a high-speed PWM module with complementary outputs, dead-time insertion and fault protection, a high-speed 10-bit ADC with multiple sample-and-hold circuits able to trigger from the PWM, four analog comparators, two QEI (quadrature encoder interface) modules, a CAN 2.0B controller, and on-chip DAC outputs. These peripherals map directly onto PFC stage, phase-current, and bus-voltage sensing with minimal external circuitry. Architecturally, the 16-bit pipelined core executes C-efficient code with DSP instructions, while the ADC-PWM loop timing in the low hundreds of nanoseconds enables high-bandwidth current-mode control for LLC, half-bridge, and interleaved topologies. Internal fast RC oscillators and PLL allow 50 MIPS operation without an external crystal in cost-sensitive designs. Typical applications include AC-DC converters, DC-DC converters, power factor correction, uninterruptible power supplies, solar inverters, and digital lighting ballasts, where the integrated SMPS peripherals replace discrete analog control loops. Design consideration: the ADC sampling window and PWM dead-time registers must be co-scheduled; use the datasheet trigger scheme to avoid sampling during switching transients. This page synthesizes verified distributor data, drop-in alternatives, and design guidance not found on a single manufacturer or distributor page.

询价联系我们

DSPIC33FJ64GS610T-I/PF

DSPIC33FJ64GS610T-I/PF - 16-bit DSC 40MIPS 64KB | Microchip

The Microchip Technology DSPIC33FJ64GS610T-I/PF is a 16-bit digital signal controller (DSC) delivering 40 MIPS from 64 KB (64K x 8) of flash memory with 9 KB RAM, housed in a 100-pin TQFP (14x14 mm) package. A digital signal controller combines the computational throughput of a digital signal processor with the deterministic control peripherals of a microcontroller. Within the power-management IC hierarchy, the dsPIC33F GS family occupies the role of a dedicated digital power conversion engine, replacing analog loop control with firmware-executed compensation in switch-mode power supply (SMPS) systems. Key features of this device include dedicated high-resolution SMPS PWM modules, two quadrature encoder interfaces (QEI), a CAN controller, four on-chip comparators, and DAC-based analog comparators tailored for multi-loop power conversion. These peripherals enable AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, and uninterruptible power supply (UPS) designs on a single controller. The dsPIC33F core executes an enhanced 16-bit instruction set with DSP instructions, a barrel shifter, four DMA channels, and boundary-scan (JTAG) support for production programming and debugging. In-circuit serial programming (ICSP) uses the PGECx/PGEDx pin pairs, and Microchip recommends keeping ICSP trace lengths short on high-speed power boards. Typical applications include interleaved PFC front ends (Microchip's 350 W universal-input interleaved PFC reference design uses this family), telecom rectifiers, solar micro-inverters, battery chargers, and embedded motor-drive control where deterministic 40 MIPS control loops are required. Design consideration: the -I temperature suffix covers -40C to +85C industrial operation; if extended temperature range to +125C is required, use the -E suffix variant, which shares the same die and TQFP footprint. This page adds value beyond the datasheet by synthesizing distributor pricing across 9 sources, drop-in alternatives within the same 100-TQFP footprint, and practical digital-power design notes not found on the Microchip product page.

询价联系我们

DSPIC33FJ64GS610T-I/PT

DSPIC33FJ64GS610T-I/PT - 40MIPS 16-bit DSC for Digital Power | Microchip

The Microchip Technology DSPIC33FJ64GS610T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33FJ64GS610 SMPS family, delivering up to 40 MIPS of dsPIC core performance with 64KB (64K x 8) of FLASH program memory and 9KB of RAM, housed in a 100-pin TQFP (12x12 mm) surface-mount package operating from a 3.3 V supply across an industrial temperature range of -40C to +85C. A digital signal controller combines the computational throughput of a 16-bit microcontroller with DSP-grade math acceleration, making the dsPIC33F family a staple of digital switch-mode power supply (SMPS) design, where a single chip closes current and voltage control loops in firmware while driving PWM stages directly. Within the power-management semiconductor hierarchy, the DSPIC33FJ64GS610 sits in the digital power conversion segment between general-purpose MCUs and dedicated DSPs. Key features include a high-speed PWM module purpose-built for power conversion, a high-speed 10-bit and 12-bit ADC with simultaneous multi-channel sampling for multi-loop control, and integrated analog comparators for cycle-by-cycle current limiting. The device supports 40 MHz input clocking (40 MIPS operation per Microchip USA product data), and the tape-and-reel (/T) suffix supports automated SMT assembly lines. The architecture pairs the dsPIC33F 16-bit RISC core with DSP multiply-accumulate instructions and hardware loop support, enabling deterministic single-cycle MAC execution that keeps PFC and phase-shifted control loops stable at high switching frequencies. An In-Circuit Serial Programming (ICSP) interface via PGECx/PGEDx pins allows field firmware updates with only two dedicated pins, which Microchip recommends keeping as short traces to the programming connector. Typical applications include AC-to-DC converters, DC-to-DC converters, Power Factor Correction (PFC) stages, uninterruptible power supplies (UPS), solar inverters, and battery chargers. The Interleaved PFC reference design from Microchip demonstrates 350 W output from a universal AC input using this controller family. Design consideration: budget the PCB footprint carefully - the 100-pin TQFP (12x12 mm, 0.5 mm pitch) requires controlled-impedance-aware layout for the PWM outputs, and the extended-temperature -E/PT variant is required instead if -40C to +125C ambient is needed. This page synthesizes distributor pricing, drop-in same-family alternatives, applications, and design guidance not found in a single manufacturer source.

询价联系我们

DSPIC33FJ64MC202-E/MM

DSPIC33FJ64MC202-E/MM - 16-bit DSC 40MIPS 64KB Flash QFN-28 | Microchip

The Microchip Technology DSPIC33FJ64MC202-E/MM is a 16-bit digital signal controller (DSC) delivering up to 40 MIPS with 64 KB of Flash program memory and 8 KB of SRAM, housed in a 28-pin VQFN (MM) package measuring 6 x 6 x 0.9 mm with an exposed pad. It operates from a 3.3 V supply across the extended industrial temperature range of -40C to +125C and carries AEC-Q100 automotive qualification. A digital signal controller combines the peripheral set and ease of use of a microcontroller with the computational throughput of a DSP engine. In the power-management hierarchy, a DSC sits between general-purpose MCUs and dedicated DSPs: it executes deterministic control loops (PID, field-oriented control) while simultaneously handling communication, sequencing, and housekeeping tasks. This makes DSCs the de-facto controller class for digitally controlled power conversion and motion systems. Key features of the DSPIC33FJ64MC202-E/MM include its 40 MIPS 16-bit modified Harvard architecture core with DSP multiply-accumulate instructions, dedicated motor-control PWM peripherals designed for three-phase inverter drives, up to 8 DMA channels that move data without CPU intervention, and 5 timers for multi-rate control loops. According to Microchip, the dsPIC33F family is pin compatible with the PIC24HJ family and shares a very high degree of compatibility with dsPIC30F devices, enabling seamless migration between families. Technically, the device integrates an on-chip high-speed analog front end (the MC variant targets the advanced-analog motor control market), barrel shifter, modulo and bit-reversed addressing for FFT algorithms, and dual inline Flash/SRAM buses that allow instruction fetch and data access in the same cycle. The extended-temperature E suffix supports thermally demanding automotive and industrial environments, while the QFN exposed-pad package improves heat transfer to the PCB. Typical applications include brushless DC and permanent-magnet synchronous motor drives, digital power supplies ( LLC, totem-pole PFC), solar micro-inverters, and embedded control in automotive auxiliary systems. The motor-control PWM with complementary outputs and dead-time insertion directly maps onto half-bridge topologies. Design-wise, plan the 3.3 V rail with adequate decoupling on both VDD pins and solder the exposed thermal pad to a ground pour for lowest junction-to-ambient impedance. Note that achieving the 40 MIPS ceiling requires the internal PLL from the oscillator source. This page synthesizes distributor pricing from Mouser, DigiKey, LCSC and Newark, same-package drop-in alternatives, and practical design notes that go beyond the raw datasheet listing.

询价联系我们

子分类

产品（39,000+)

DSPIC33FJ64GS406-I/MR - 16-bit DSC, 64KB Flash, 50MIPS | Microchip

DSPIC33FJ64GS406-I/PT - 16-bit DSC, 40MIPS, 64KB Flash | Microchip

DSPIC33FJ64GS406T-50I/MR - 16-bit DSC, 50 MIPS, 64KB | Microchip

DSPIC33FJ64GS406T-50I/PT - 16-bit DSC 50 MIPS SMPS PWM | Microchip

DSPIC33FJ64GS606-50I/MR - 16-bit 50MIPS SMPS DSC | Microchip

DSPIC33FJ64GS606-50I/PT - 16-bit DSC 50MIPS 64KB Flash | Microchip

DSPIC33FJ64GS606-E/MR - 16-bit DSC 40MIPS 64KB | Microchip

DSPIC33FJ64GS606-I/MR - 16-bit DSC 40MIPS 64KB Flash | Microchip

DSPIC33FJ64GS606-I/PT - 16-bit DSC, 40 MIPS, 64KB Flash | Microchip

DSPIC33FJ64GS606T-50I/PT - 16-bit 50MIPS DSC 64KB Flash | Microchip

DSPIC33FJ64GS606T-I/MR - 16-bit 40MIPS DSC 64KB | Microchip

DSPIC33FJ64GS606T-I/PT - 16-bit DSC 40MIPS 64KB Flash | Microchip

DSPIC33FJ64GS608-50I/PT - 16-bit 50MIPS DSC | Microchip

DSPIC33FJ64GS608-I/PT - 16-bit DSC 40MIPS 64KB Flash | Microchip

DSPIC33FJ64GS608T-50I/PT - 16-bit DSC 50MIPS 64KB | Microchip

DSPIC33FJ64GS610-50I/PT - 16-bit DSC 50MIPS 64KB Flash | Microchip

DSPIC33FJ64GS610-E/PT - 16-bit 40MIPS DSC, 64KB Flash | Microchip

DSPIC33FJ64GS610-I/P - 16-bit DSC 40MIPS 64KB Flash | Microchip

DSPIC33FJ64GS610-I/PF - 16-bit DSC 40 MIPS 64KB Flash | Microchip

DSPIC33FJ64GS610T-50I/PF - 16-bit 50MIPS DSC 64KB Flash | Microchip

DSPIC33FJ64GS610T-50I/PT - 16-bit 50MIPS DSC 64KB Flash | Microchip

DSPIC33FJ64GS610T-I/PF - 16-bit DSC 40MIPS 64KB | Microchip

DSPIC33FJ64GS610T-I/PT - 40MIPS 16-bit DSC for Digital Power | Microchip

DSPIC33FJ64MC202-E/MM - 16-bit DSC 40MIPS 64KB Flash QFN-28 | Microchip