集成电路

子分类

📁 ADC/DAC 2519 产品 📁 放大器IC 797 产品 📁 音频编解码器 16 产品 📁 音频IC 2 产品 📁 时钟与计时 301 产品 📁 DSP 963 产品 📁 数据采集IC 2 产品 📁 数字电位器 4 产品 📁 显示驱动与控制器 1 产品 📁 FPGA与CPLD 6666 产品 📁 接口IC 1586 产品 📁 LED驱动器 1 产品 📁 逻辑IC 305 产品 📁 存储IC 875 产品 📁 微控制器 18730 产品 📁 微处理器 4 产品 📁 电机驱动器 1 产品 📁 其他 1 产品 📁 Sensor and Detector Interfaces 1 产品 📁 专用IC 15 产品 📁 视频IC 13 产品

产品（32805)

AD42/206-0 - 12-Bit Sampling ADC, 10V Input, 24-SOIC | ADI
AD42/206-0

AD42/206-0 - 12-Bit Sampling ADC, 10V Input, 24-SOIC | ADI

The Analog Devices AD42/206-0 is a 12-bit sampling analog-to-digital converter (ADC) accepting up to 10 V input signal range, housed in a 24-pin SOIC wide-body (24-SOIC) package. The part is listed as a data-acquisition ADC IC with successive-approximation (SAR) sampling architecture typical of the AD42x family. An ADC (Analog-to-Digital Converter) is a mixed-signal integrated circuit that converts a continuous analog voltage into a discrete digital code word. SAR ADCs use a binary search algorithm via an internal DAC and comparator to determine each bit sequentially in N clock cycles, providing deterministic latency and excellent DC accuracy. The AD42/206-0 belongs to the data-acquisition ADC sub-class within the broader ADC/DAC converter category, sitting in the mixed-signal IC family and the power-management-adjacent analog-IC hierarchy used in precision measurement and instrumentation. Key characteristics visible from the verified listing include 12-bit resolution, a 10 V analog input range compatible with industrial sensor signal levels, a 24-pin SOIC wide-body package for through-hole or surface-mount reflow assembly, and an Analog Devices product designation typical of legacy precision-converter line items. The wide SOIC footprint aids thermal dissipation for the internal reference and amplifier blocks and provides easier hand-soldering for prototyping versus QFN packages. The AD42/206-0 architecture supports single-shot or successive-sampling conversion suitable for multiplexed channel scanning in data-acquisition systems. When paired with an external sample-and-hold or front-end buffer, the converter can digitize wide-bandwidth signals, and its bipolar 10 V input range simplifies direct connection to industrial ±5 V or 0-10 V transducer outputs without additional signal conditioning. Typical applications include industrial process-control data-acquisition boards, precision weighing scales, panel meters and digital multimeters, medical instrumentation signal chains, and legacy PLC analog-input modules. The 12-bit resolution provides 4096 discrete levels, well suited for monitoring applications where sub-1% accuracy is acceptable. Use this ADC in designs where the 10 V input range matches the transducer output and 12 bits is sufficient for the control loop. For designs requiring higher resolution (14-bit or above), consult the Site MPN list for ADS-series or AD7983-series alternatives from Texas Instruments or Analog Devices.

询价 联系我们
AD42377 - 12-Bit Analog to Digital Converter | Analog Devices
AD42377

AD42377 - 12-Bit Analog to Digital Converter | Analog Devices

The Analog Devices AD42377 is a 12-bit analog-to-digital converter (ADC) from the ADI precision data-converter portfolio, supplied as a single-channel input ADC in a surface-mount IC package. The device targets cost-sensitive industrial measurement and instrumentation applications where a compact, moderate-resolution converter is sufficient. According to the ADI product listing, the AD42377 is classified as a "12 Bit Analog to Digital Converter Input" device. An analog-to-digital converter (ADC) is an integrated circuit that samples a continuous analog voltage and converts it into a discrete digital code at a specified sampling rate. In the broader system hierarchy, ADCs sit between analog signal-conditioning circuitry (amplifiers, filters, sensors) and a digital controller (MCU, FPGA, DSP). The 12-bit resolution class typically delivers ~0.024% full-scale quantization step (1 LSB = VREF/4096) and is widely used in industrial process control, sensor readout, motor control feedback loops, and portable instrumentation. Key features of the AD42377 include single-supply operation, CMOS-compatible digital interface, and a small-form-factor surface-mount package suited for high-density PCB designs. The 12-bit core provides adequate resolution for closed-loop control and many measurement tasks without the cost and latency of higher-resolution 14-/16-/18-/24-bit converters. The device is offered through the ADI global authorized distributor network and ships in standard tape-and-reel packaging. Architecturally, the AD42377 integrates a sample-and-hold front end, a successive-approximation register (SAR) or flash-style conversion core (per ADI's product category), an internal reference option, and a serial or parallel digital interface. Designers should consult the manufacturer datasheet for the exact input range, sample rate, channel count, and interface timing. Typical applications include industrial process-control analog input modules, sensor-signal digitization in PLCs, temperature/pressure transmitter front ends, and battery-powered handheld instrumentation where moderate resolution, low power, and a compact footprint are required. When pairing the AD42377 with an upstream instrumentation amplifier, select one with low offset and low noise so that the ADC's quantization noise remains the dominant error source. Design with adequate input filtering (an RC anti-alias network) and bypass capacitors on every supply pin. This page synthesizes distributor stock, application guidance, and pin-compatibility notes beyond the raw datasheet.

询价 联系我们
AD42823Z - 12-Bit Voltage-Output Quad DAC | Analog Devices
AD42823Z

AD42823Z - 12-Bit Voltage-Output Quad DAC | Analog Devices

The Analog Devices AD42823Z is a monolithic quad 12-bit voltage-output digital-to-analog converter (DAC) integrating four complete DACs on a single IC. It features 12-bit resolution, voltage outputs, and is housed in a 28-pin SOIC package (per verified product listings). The device is part of the ADI precision converter legacy portfolio and is documented in the AD664 family datasheet indexed by distributor cross-reference tools. A DAC (digital-to-analog converter) is a data conversion integrated circuit that translates digital codes into proportional analog voltages or currents. Within the broader taxonomy, the AD42823Z belongs to: DAC -> data converter -> signal conditioning IC -> mixed-signal semiconductor -> integrated circuit. Quad voltage-output DACs are commonly used in applications requiring multiple synchronized analog channels such as automatic test equipment, industrial process control, and multi-axis motion control. Key features of the AD42823Z include four matched 12-bit DACs on one die, voltage outputs typically railed to the supply, and compatibility with parallel microprocessor write cycles. The integrated design reduces board area compared to discrete multi-chip solutions and provides inherently better channel-to-channel matching. Operating from a standard supply range, the part interfaces directly to most microprocessors without external glue logic. From an architectural perspective, the AD42823Z uses a precision R-2R ladder network for each DAC, switched by CMOS latches. The monolithic fabrication ensures that all four DACs share the same reference and are trimmed together, providing tight gain and offset matching. The voltage-output architecture eliminates the need for external op-amp current-to-voltage conversion, simplifying design-in for cost-sensitive multi-channel applications. Typical applications include process control setpoint generation, multi-axis motor drive references, programmable gain/instrumentation, ATE (automatic test equipment) stimulus, and audio mixing consoles. The quad-channel configuration is also suited to color graphics or display drive circuits requiring synchronized multi-channel analog outputs. When designing with the AD42823Z, ensure adequate decoupling (0.1uF ceramic close to the supply pins) and respect the digital-input setup and hold times relative to the write strobe. The voltage outputs are not buffered for high-capacitive loads - a follow-on op-amp buffer may be required if driving long cables or low-impedance loads. This page synthesizes distributor stock data, drop-in alternatives, and practical design notes that complement the manufacturer datasheet.

询价 联系我们
AD42933 - 12-Bit ADC Input | Analog Devices
AD42933

AD42933 - 12-Bit ADC Input | Analog Devices

The Analog Devices AD42933 is a 12-bit analog-to-digital converter (ADC) input front-end IC from Analog Devices Inc., offered as a data conversion component for precision measurement systems. Per the DigiKey product listing, the AD42933 is categorized as a 12 Bit Analog to Digital Converter Input from Analog Devices Inc. The device is intended for signal-chain applications where a compact ADC front-end is required and where the converter core, reference, and input conditioning are integrated into a single package. As a 12-bit ADC input, the AD42933 sits in the data-acquisition sub-system hierarchy: ADC input -> ADC -> data converter -> mixed-signal IC -> integrated circuit. Key features of the AD42933 include its 12-bit resolution, which provides 4096 discrete output codes for digitizing analog signals, and its positioning as an Analog Devices Inc. data-conversion product. Because the verified distributor listings describe the part as an "ADC Input" rather than a stand-alone complete SAR or sigma-delta converter, designers should treat the AD42933 as the analog front-end portion of a precision measurement channel, pairing it with a system-level converter or using it where a pre-conditioned, scaled, and referenced analog signal must be delivered to a downstream ADC. The IC is listed across multiple authorized distributor catalogs (DigiKey, Octopart, Vyrian, Jotrin, JAK Electronics), confirming it is a commercially available part number with active stock visibility. From an architectural standpoint, the AD42933 belongs to Analog Devices' broad precision converter portfolio, where the company leverages proprietary analog front-end techniques, on-chip references, and calibrated gain stages. Designers integrating the AD42933 should consult the official Analog Devices datasheet to confirm reference architecture, input range, sampling topology, and digital interface timing. Because the verified web snippets describe the part as an "Input" rather than a complete ADC with explicit throughput, the underlying conversion clock, sample-and-hold, and reference behavior should be verified in the datasheet before PCB design lock. Typical applications for the AD42933 include industrial process control instrumentation, factory automation analog input modules, sensor signal conditioning front-ends, and programmable logic controller (PLC) analog input cards where 12-bit resolution is sufficient. The 12-bit resolution is well matched to thermocouple and RTD front-end conditioning where 0.1 percent full-scale accuracy is adequate. When designing with the AD42933, ensure that the analog input common-mode voltage and the device's reference topology are matched to the downstream ADC. Decoupling and grounding must follow Analog Devices' typical precision-converter guidance to preserve the 12-bit noise floor. Verify the supply voltage, reference voltage, and digital interface levels against the official datasheet prior to schematic capture. This page synthesizes distributor listings, cross-reference search visibility, and practical design guidance that goes beyond the brief datasheet snippets, providing engineers with a single consolidated reference for sourcing and applying the AD42933.

询价 联系我们
AD42941 - 12-Bit ADC IC | Analog Devices | PLCC-28
AD42941

AD42941 - 12-Bit ADC IC | Analog Devices | PLCC-28

The Analog Devices AD42941 is a 12-bit analog-to-digital converter (ADC) integrated circuit that performs sampled measurement rather than analog amplification, housed in a 28-pin PLCC (Plastic Leaded Chip Carrier) package. Key rated parameters include 12-bit resolution and a 28-PLCC surface-mount form factor designed through-hole-leaded carrier for legacy industrial test, instrumentation, and data-acquisition boards. An ADC (Analog-to-Digital Converter) is a mixed-signal data-conversion integrated circuit that quantizes a continuous-time, continuous-amplitude analog input into a discrete digital code word. In the broader taxonomy, the AD42941 belongs to: ADC -> data converter -> mixed-signal IC -> integrated circuit -> semiconductor. It is one of the building blocks in signal-chain applications where a precision front-end amplifier, anti-alias filter, voltage reference, and ADC together define overall system accuracy. As an SAR-style data converter, the part is intended for medium-speed, multi-channel scanning where deterministic sampling and digital repeatability matter more than raw conversion speed. Key features of the AD42941 include 12-bit native resolution, a 28-PLCC JEDEC-compliant package outline that supports legacy and drop-in replacement designs, and Analog Devices' standard converter interface that typically pairs with an external reference and serial or parallel digital host. The device is intended for industrial, instrumentation, and process-control applications and benefits from the wide component-availability of the 28-PLCC footprint in long-lifecycle systems. From an architectural standpoint, the AD42941 follows the classic Analog Devices sampled-data converter pattern: an internal sample-and-hold, an ADC core, and a digital interface. Because accuracy depends on the reference, the front-end driver, and board-level layout, designers typically pair the part with a low-noise precision reference and a low-impedance input buffer. The PLCC-28 mechanical outline provides generous internal paddle area for thermal dissipation and a robust through-hole-style solder joint suited to legacy factory-floor systems. Typical applications include process-control analog input modules, multi-channel data-acquisition front ends, industrial sensor signal conditioning, test and measurement instrumentation, and PLC analog input cards. Its 12-bit resolution (4096 codes, ~0.024% step size, about 8 mV LSB at a 5 V full scale) is well suited for general-purpose industrial sensing where 0.1% absolute accuracy is sufficient. When designing with the AD42941, pay close attention to input-bandwidth and anti-alias filtering, and ensure reference decoupling capacitors are placed as close to the reference pins as possible. Avoid running high-current digital return paths under the analog ground plane to prevent digital switching noise from coupling into the analog front end. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes beyond the manufacturer datasheet, organized for engineers who need an at-a-glance spec sheet and reference design context.

询价 联系我们
AD4630-24BCPZ - 24-Bit 2MSPS Dual SAR ADC | Analog Devices
AD4630-24BCPZ

AD4630-24BCPZ - 24-Bit 2MSPS Dual SAR ADC | Analog Devices

The AD4630-24BCPZ is a two-channel, simultaneous sampling, Easy Drive, 2 MSPS successive approximation register (SAR) analog-to-digital converter (ADC) from Analog Devices. It delivers 24-bit resolution with a guaranteed maximum ±0.9 ppm INL and no missing codes across the full −40°C to +125°C temperature range. The device operates from a 5 V analog supply and a 1.8 V digital supply, and it is available in a 64-ball CSPBGA (7x7 mm) package. A SAR ADC is a type of analog-to-digital converter that uses a binary search algorithm to convert an analog input into a digital output. It is known for its high speed, low power, and excellent accuracy, making it ideal for precision measurement applications. The AD4630-24 belongs to the SAR ADC family, which is a subset of data converters, which are essential components in signal processing chains. Key features include a typical dynamic range of 106 dB when using a 5 V reference, a low noise floor that enables signal chains requiring less gain and lower power, and an Easy Drive architecture that simplifies the analog front-end design. The device also integrates a power-on reset (POR) circuit that resets the ADC at initial power-up or whenever VDD_5V or VDD_1.8V drops below the specified operating range. The AD4630-24 uses a precision capacitive DAC and a high-speed comparator to achieve its performance. The Easy Drive feature reduces the input current and simplifies the drive amplifier requirements, allowing for direct connection to sensors and transducers. The device supports both SPI and parallel interfaces, providing flexibility in system integration. Typical applications include precision data acquisition systems, medical instrumentation, industrial process control, and scientific instrumentation. The high resolution and low noise make it suitable for applications that require accurate measurement of small signals, such as weigh scales, pressure sensors, and temperature sensors. When designing with the AD4630-24, it is important to provide a clean, low-noise power supply and a stable reference voltage. The device's integrated bypass capacitors in the BGA package reduce the need for external components and improve performance. Proper PCB layout, including a solid ground plane and short traces, is essential to achieve the specified performance.

询价 联系我们
AD4632-24BCPZ - 24-Bit 500kSPS Dual SAR ADC | Analog Devices
AD4632-24BCPZ

AD4632-24BCPZ - 24-Bit 500kSPS Dual SAR ADC | Analog Devices

The AD4632-24BCPZ is a dual-channel, simultaneous sampling, 24-bit successive approximation register (SAR) analog-to-digital converter (ADC) from Analog Devices. It operates at a maximum throughput of 500 kSPS and features the Easy Drive™ architecture, which simplifies the analog front-end design by reducing input drive requirements. The device is available in a 64-ball CSP_BGA (7x7 mm) package, integrating critical power supply and reference bypass capacitors to minimize footprint and board sensitivity. A SAR ADC is a type of analog-to-digital converter that uses a binary search algorithm to convert an analog input into a digital output. It is known for its high resolution, low power consumption, and fast conversion times, making it ideal for precision measurement applications. The AD4632-24 belongs to the family of precision SAR ADCs, which are essential in data acquisition systems where accuracy and speed are critical. Key features of the AD4632-24BCPZ include a guaranteed maximum ±0.9 ppm INL with no missing codes at 24 bits, a typical dynamic range of 106 dB when using a 5 V reference, and a low noise floor that enables signal chains requiring less gain and lower power. The device operates over the industrial temperature range of -40°C to +125°C, ensuring reliable performance in harsh environments. The AD4632-24BCPZ integrates all critical power supply and reference bypass capacitors within the package, reducing the external component count and simplifying PCB layout. This integration also lessens sensitivity to board layout, making it easier to achieve optimal performance. The device supports both 2 and 4 input configurations, providing flexibility for various system architectures. Typical applications include precision data acquisition systems, medical instrumentation, industrial process control, and scientific instrumentation. The high resolution and low noise make it suitable for applications requiring accurate measurement of small signals, such as weigh scales, pressure sensors, and temperature sensors. When designing with the AD4632-24BCPZ, it is important to provide a clean, low-noise reference voltage and adequate decoupling on the power supply pins. The integrated bypass capacitors help, but external decoupling is still recommended for optimal performance. Additionally, the input signal should be properly buffered to avoid charge injection from the SAR architecture.

询价 联系我们
AD4680BCPZ - 16-Bit 1MSPS Dual SAR ADC | Analog Devices
AD4680BCPZ

AD4680BCPZ - 16-Bit 1MSPS Dual SAR ADC | Analog Devices

The AD4680BCPZ is a 16-bit, dual simultaneous sampling, successive approximation register (SAR) analog-to-digital converter (ADC) from Analog Devices. It operates from a 3.0 V to 3.6 V power supply and features a throughput rate of 1 MSPS. The device accepts two differential input channels and is housed in a compact 16-lead LFCSP (3x3 mm) package, making it suitable for space-constrained industrial and instrumentation applications. What is a SAR ADC? A successive approximation register (SAR) ADC is a type of analog-to-digital converter that uses a binary search algorithm to convert an analog input to a digital output. It compares the input voltage against a reference voltage using a capacitive digital-to-analog converter (DAC) and a comparator, iterating from the most significant bit (MSB) to the least significant bit (LSB). SAR ADCs are known for their high speed, low power, and excellent accuracy, making them ideal for applications such as data acquisition systems, motor control, and medical instrumentation. They are a subset of the broader ADC family, which also includes delta-sigma and pipeline converters. Key features of the AD4680BCPZ include dual simultaneous sampling, which allows two channels to be sampled at the same instant, preserving phase information between signals. The device also offers a high-speed serial interface (SPI) for easy connection to microcontrollers and DSPs. With a 16-bit resolution and 1 MSPS throughput, it provides high precision and fast conversion rates. The low power consumption, typically 15 mW at 1 MSPS, makes it suitable for battery-powered and portable equipment. The AD4680BCPZ uses a charge redistribution architecture with an internal reference buffer, ensuring accurate conversions over temperature. It includes a flexible power-down mode to reduce power consumption during idle periods. The device also features a temperature range of -40°C to +125°C, suitable for industrial environments. The LFCSP package offers excellent thermal performance and a small footprint, enabling high-density PCB layouts. Typical applications include motor control, where dual simultaneous sampling is essential for accurate current and voltage measurement, and data acquisition systems for industrial automation. The device is also used in medical devices, such as patient monitoring systems, where precision and low power are critical. Additionally, it is suitable for power monitoring and instrumentation. When designing with the AD4680BCPZ, ensure that the reference voltage is stable and well-decoupled. Use a low-noise reference, such as the ADR4520, to achieve optimal performance. The SPI interface should be isolated if the ADC is placed near noisy components. Proper PCB layout, including a solid ground plane and short traces, is essential to minimize noise and achieve the specified performance.

询价 联系我们
AD4681BCPZ - 16-Bit 500kSPS Dual SAR ADC | Analog Devices
AD4681BCPZ

AD4681BCPZ - 16-Bit 500kSPS Dual SAR ADC | Analog Devices

The AD4681BCPZ is a 16-bit, dual simultaneous sampling, successive approximation register (SAR) analog-to-digital converter (ADC) from Analog Devices. It operates from a 3.0 V to 3.6 V power supply and features a throughput rate of 500 kSPS. The device accepts two differential input channels and is available in a compact 3 mm × 3 mm, 16-lead LFCSP package, making it ideal for space-constrained industrial and instrumentation applications. A SAR ADC is a type of analog-to-digital converter that uses a binary search algorithm to convert an analog input into a digital output. It offers a good balance of speed, resolution, and power consumption, making it suitable for applications such as motor control, data acquisition, and industrial automation. The AD4681 belongs to the ADC family, which is a subset of data converters, and ultimately falls under the broader category of mixed-signal integrated circuits. Key features of the AD4681 include dual simultaneous sampling, which allows both channels to be sampled at the same instant, preserving phase information between signals. The device also supports a separate logic supply, enabling direct interfacing with 1.8 V, 2.5 V, or 3.3 V digital systems. The conversion process uses standard control inputs, simplifying integration with microprocessors or DSPs. The AD4681 is specified for operation from −40°C to +125°C, ensuring reliable performance in harsh environments. Technically, the AD4681 uses a capacitive DAC architecture with a precision comparator, achieving high accuracy and low power consumption. The dual ADC cores operate simultaneously, each with its own track-and-hold circuit, ensuring synchronized sampling. The device includes an internal reference buffer and supports both SPI and daisy-chain modes for flexible data readout. The LFCSP package offers excellent thermal performance and a small footprint, reducing PCB area. Typical applications include motor control, where simultaneous current and voltage sensing is critical, and industrial data acquisition systems that require high-speed, high-resolution conversion. The AD4681 is also suitable for power monitoring, vibration analysis, and other precision measurement applications. Its low power consumption and wide temperature range make it a versatile choice for both portable and fixed installations. When designing with the AD4681, ensure that the analog input signals are properly conditioned with anti-aliasing filters and that the reference voltage is stable and low-noise. The separate logic supply should be decoupled with a 0.1 µF capacitor close to the pin. For optimal performance, use a clean analog ground plane and minimize digital switching noise near the ADC.

询价 联系我们
AD4682BCPZ - 16-Bit 1MSPS Dual SAR ADC | Analog Devices
AD4682BCPZ

AD4682BCPZ - 16-Bit 1MSPS Dual SAR ADC | Analog Devices

The AD4682BCPZ is a 16-bit, dual, simultaneous sampling, successive approximation register (SAR) analog-to-digital converter (ADC) from Analog Devices. It operates from a 3.0 V to 3.6 V power supply and features a pseudo differential input, achieving a maximum throughput of 1 MSPS. The device is housed in a compact 16-lead LFCSP (3x3 mm) package, making it suitable for space-constrained applications. An ADC (analog-to-digital converter) is a device that converts continuous analog signals into discrete digital values for processing by digital systems. SAR ADCs use a binary search algorithm to approximate the input voltage, offering a good balance of speed, resolution, and power consumption. The AD4682 is part of the data acquisition signal chain, bridging real-world analog signals to digital processors, microcontrollers, or DSPs. Key features include a buffered internal 2.5 V reference, with the option to use an external reference up to 3.3 V. The device supports standard control inputs for easy interfacing with microprocessors and DSPs. It also features a pseudo differential input configuration, which rejects common-mode noise and simplifies front-end design. The dual-channel simultaneous sampling capability ensures accurate phase matching between two input signals, critical for applications like motor control and power monitoring. Technically, the AD4682 employs a charge redistribution SAR architecture with a capacitive DAC, providing excellent linearity and low noise. The device includes a track-and-hold circuit that captures the input signal at the sampling instant, ensuring accurate conversion. The internal reference buffer reduces external component count, while the SPI-compatible serial interface allows high-speed data transfer. The device is specified for operation from -40°C to +125°C, making it suitable for industrial environments. Typical applications include motor control, power line monitoring, data acquisition systems, and industrial automation. In motor control, the simultaneous sampling of current and voltage enables precise vector control algorithms. In power monitoring, the high resolution and speed allow accurate measurement of AC waveforms. The small package and low power consumption make it ideal for portable and embedded systems. When designing with the AD4682, ensure that the reference voltage is stable and well-decoupled. Use a low-impedance source to drive the analog inputs to avoid sampling errors. The SPI interface should be properly terminated to minimize signal integrity issues. Consider the power supply noise and use appropriate filtering to achieve the specified performance.

询价 联系我们
AD4683BCPZ - 16-Bit 500kSPS Dual SAR ADC | Analog Devices
AD4683BCPZ

AD4683BCPZ - 16-Bit 500kSPS Dual SAR ADC | Analog Devices

The AD4683BCPZ is a 16-bit, dual, simultaneous sampling, successive approximation register (SAR) analog-to-digital converter (ADC) from Analog Devices. It operates from a 3.0 V to 3.6 V power supply and features a pseudo-differential input, achieving a throughput rate of 500 kSPS. The device is available in a compact 16-lead LFCSP (3x3 mm) package, making it suitable for space-constrained applications. A SAR ADC is a type of analog-to-digital converter that uses a binary search algorithm to convert an analog input into a digital output. It is known for its high speed, low power consumption, and excellent accuracy, making it ideal for applications such as data acquisition systems, industrial process control, and medical instrumentation. The AD4683 is part of a pin-compatible family that includes the AD4682, which offers a higher throughput of 1 MSPS, allowing designers to scale performance without changing the PCB layout. Key features of the AD4683 include dual simultaneous sampling, which ensures that both input channels are captured at the same instant, critical for applications like motor control and power monitoring. The device also offers a pseudo-differential input configuration, which provides common-mode rejection and reduces noise. With a 16-bit resolution, it delivers high precision, and its low power consumption makes it suitable for battery-powered devices. The AD4683 uses a SAR architecture with an internal reference and a serial interface (SPI) for data output. It includes a conversion clock and supports daisy-chaining for multiple devices. The device operates over a temperature range of -40°C to +125°C, ensuring reliability in harsh environments. Its small LFCSP package and low power dissipation make it an excellent choice for portable and embedded systems. Typical applications include industrial automation, data acquisition systems, motor control, and medical devices. The dual simultaneous sampling capability is particularly beneficial for applications requiring precise phase alignment between two signals, such as power quality analysis and vibration monitoring. When designing with the AD4683, ensure that the analog input signals are within the specified common-mode range and that the reference voltage is stable. Proper decoupling of the power supply and careful PCB layout are essential to achieve the specified performance.

询价 联系我们
AD4690BCPZ - 16-Bit, 16-Channel, 1 MSPS SAR ADC | Analog Devices
AD4690BCPZ

AD4690BCPZ - 16-Bit, 16-Channel, 1 MSPS SAR ADC | Analog Devices

The AD4690BCPZ is a 16-bit, 16-channel, successive approximation register (SAR) analog-to-digital converter (ADC) from Analog Devices, featuring Easy Drive technology that simplifies front-end design by reducing input drive requirements. It operates at throughput rates up to 1 MSPS and is available in a compact 32-lead LFCSP-WQ (5x5 mm) package. The device supports a wide analog input range and includes a high-Z input mode that eliminates the need for external driver amplifiers in many applications. A SAR ADC is a type of analog-to-digital converter that uses a binary search algorithm to convert an analog input into a digital output. It is known for its high speed, low power consumption, and excellent accuracy, making it ideal for applications such as industrial process control, data acquisition systems, and medical instrumentation. The AD4690BCPZ belongs to the family of precision SAR ADCs, which are essential building blocks in mixed-signal systems where accurate conversion of real-world signals is critical. Key features of the AD4690BCPZ include 16-bit resolution, 16 single-ended or 8 differential input channels, a maximum sampling rate of 1 MSPS, and an SPI-compatible serial interface. The device also offers a flexible power supply range, low power dissipation, and a built-in reference buffer. The Easy Drive technology reduces the input current and settling time, allowing direct connection to high-impedance sources without external buffers. The AD4690BCPZ uses a charge redistribution SAR architecture with a capacitive DAC, providing excellent linearity and low noise. The device includes a track-and-hold circuit that captures the analog input at the start of each conversion, ensuring accurate sampling. The high-Z input mode further enhances performance by reducing the input current to near zero, which is particularly beneficial when driving the ADC from high-impedance sensors. Typical applications for the AD4690BCPZ include industrial automation, motor control, power monitoring, and portable instrumentation. Its high channel count and fast sampling rate make it suitable for multi-channel data acquisition systems, while its low power consumption extends battery life in portable devices. The device is also well-suited for applications requiring high accuracy over a wide temperature range. When designing with the AD4690BCPZ, it is important to provide a clean, low-impedance reference voltage and adequate decoupling on the power supply pins. The SPI interface should be configured for the desired sampling rate, and the input signal should be properly conditioned to avoid aliasing. The high-Z input mode can be enabled to simplify the front-end design, but the trade-off in settling time should be considered for high-speed applications.

询价 联系我们
AD4691BCPZ - 16-Channel 16-Bit SAR ADC | Analog Devices
AD4691BCPZ

AD4691BCPZ - 16-Channel 16-Bit SAR ADC | Analog Devices

The AD4691BCPZ is a 16-bit, 16-channel, multiplexed successive approximation register (SAR) analog-to-digital converter (ADC) from Analog Devices, featuring Easy Drive technology. It operates at a throughput of 500 kSPS and is housed in a 32-lead LFCSP (5x5 mm) package. The device integrates precharge buffers that significantly reduce input voltage and current transients, enabling the use of smaller, lower-power analog front-end (AFE) designs without high-bandwidth ADC driver amplifiers per channel. An ADC (analog-to-digital converter) is a device that converts continuous analog signals into discrete digital numbers. The AD4691 is a SAR ADC, which uses a successive approximation register algorithm to perform conversions with high speed and accuracy. SAR ADCs are widely used in data acquisition systems, industrial process control, and medical instrumentation due to their excellent balance of speed, resolution, and power consumption. The AD4691 belongs to the family of multiplexed SAR ADCs, which allow multiple input channels to share a single conversion core, reducing cost and board space. Key features of the AD4691BCPZ include 16 single-ended or 8 differential input channels, a 16-bit resolution with no missing codes, and a maximum sample rate of 500 kSPS. The Easy Drive technology reduces input current and voltage transients, simplifying the external driver requirements. The device also includes per-channel averaging filters, which can improve noise performance and reduce the digital filter burden on the host processor. The LFCSP package offers a compact footprint suitable for space-constrained designs. Technically, the AD4691 uses a charge redistribution SAR architecture with an internal reference buffer. The precharge buffers are the key innovation, as they isolate the input from the sampling capacitor, allowing the use of lower-bandwidth amplifiers and reducing power consumption. The device supports both SPI and QSPI interfaces for communication with microcontrollers and DSPs. The per-channel averaging filters can be configured to average up to 128 samples, providing trade-offs between noise reduction and throughput. Typical applications include industrial process control, data acquisition systems, battery-powered instrumentation, and medical monitoring equipment. The AD4691 is particularly suited for multi-channel sensor monitoring where low power and small size are critical. Its Easy Drive feature makes it ideal for direct connection to sensors without complex front-end circuitry. When designing with the AD4691, ensure that the reference voltage is stable and well-decoupled. The input signal range should be within the specified common-mode range to avoid distortion. The SPI interface should be configured for the correct clock polarity and phase as per the datasheet.

询价 联系我们
AD4692BCPZ - 16-Channel 16-Bit SAR ADC | Analog Devices
AD4692BCPZ

AD4692BCPZ - 16-Channel 16-Bit SAR ADC | Analog Devices

The AD4692BCPZ is a 16-channel, 16-bit successive approximation register (SAR) analog-to-digital converter (ADC) from Analog Devices, featuring Easy Drive technology and per-channel averaging filters. It operates at a maximum sample rate of 1 MSPS and is housed in a 32-lead LFCSP (5x5 mm) package. The device is recommended for new designs and is available from major distributors. An ADC is a device that converts an analog voltage into a digital representation. The AD4692 is a multiplexed SAR ADC, meaning it uses a single conversion engine shared across multiple input channels via an internal multiplexer. SAR ADCs are known for their high speed, low power, and excellent accuracy, making them suitable for a wide range of data acquisition systems. The AD4692 belongs to the family of data converters, which are essential in bridging the analog and digital worlds in applications such as industrial automation, medical instrumentation, and test equipment. Key features of the AD4692BCPZ include 16 input channels, 16-bit resolution, and a 1 MSPS throughput. The Easy Drive technology reduces input current and voltage transients, allowing the use of smaller, lower-power amplifiers and references. Each channel has an averaging filter that can be configured to improve noise performance. The device operates from a single 5V supply and supports a wide analog input range, simplifying system design. Technically, the AD4692 uses a charge redistribution SAR architecture with an internal reference buffer. The Easy Drive feature employs precharge buffers that significantly reduce the kickback charge, enabling direct connection to high-impedance sources without external drivers. The averaging filters can be programmed to average up to 128 samples, effectively increasing the resolution for low-frequency signals. The device also includes a flexible digital interface compatible with SPI, and supports daisy-chaining for multiple devices. Typical applications include industrial process control, battery monitoring, data acquisition systems, and medical devices. The 16-channel input capability makes it ideal for monitoring multiple sensors, while the high accuracy and low noise ensure reliable measurements. The Easy Drive feature simplifies the analog front-end, reducing component count and board space. When designing with the AD4692BCPZ, ensure proper decoupling of the AVDD and DVDD supplies with 10uF and 0.1uF capacitors. The reference input should be driven by a low-impedance source, and the analog inputs should be bypassed to ground to minimize noise. The device supports a power-down mode to reduce current consumption when not converting.

询价 联系我们
AD4693BCPZ - 16-Bit 500kSPS 8-Ch SAR ADC | Analog Devices
AD4693BCPZ

AD4693BCPZ - 16-Bit 500kSPS 8-Ch SAR ADC | Analog Devices

The AD4693BCPZ is a 16-bit, 8-channel, successive approximation register (SAR) analog-to-digital converter (ADC) from Analog Devices, featuring Easy Drive technology and per-channel averaging filters. It operates at a maximum sample rate of 500 kSPS and is housed in a compact 24-lead LFCSP (4x4 mm) package. The device is designed for multiplexed data acquisition systems where input drive complexity and power consumption are critical. A SAR ADC is a type of analog-to-digital converter that uses a binary search algorithm to convert an analog input to a digital output. It is known for its high speed, low power, and excellent accuracy, making it ideal for industrial, instrumentation, and medical applications. The AD4693 belongs to the family of Easy Drive multiplexed SAR ADCs, which integrate precharge buffers to reduce input transients, allowing the use of smaller and lower-power analog front-end (AFE) components. Key features of the AD4693BCPZ include 16-bit resolution, 8 input channels, a maximum throughput of 500 kSPS, and an SPI-compatible serial interface. The Easy Drive technology significantly reduces input current and voltage transients, enabling direct connection to sensors without high-bandwidth driver amplifiers. The device also includes per-channel averaging filters that can improve effective resolution and reduce noise. The AD4693 uses a charge redistribution SAR architecture with an internal reference buffer, providing high linearity and low noise. The precharge buffers on each input channel eliminate the need for external RC filters in many applications, simplifying the AFE design. The device operates from a single 2.3V to 5.5V supply, making it suitable for battery-powered and low-voltage systems. Typical applications include industrial process control, data acquisition systems, medical instrumentation, and battery monitoring. The AD4693's low power consumption and small package make it ideal for space-constrained designs. Its Easy Drive feature allows direct connection to high-impedance sources, reducing component count and board space. When designing with the AD4693BCPZ, ensure proper decoupling of the supply pins and a clean reference voltage. The SPI interface should be isolated from noisy digital lines to maintain SNR. The device supports both single-ended and differential input configurations, providing flexibility in sensor interfacing.

询价 联系我们
AD4694BCPZ - 16-Bit 8-Ch SAR ADC | Analog Devices
AD4694BCPZ

AD4694BCPZ - 16-Bit 8-Ch SAR ADC | Analog Devices

The AD4694BCPZ is a 16-bit, 8-channel, Easy Drive multiplexed successive approximation register (SAR) analog-to-digital converter (ADC) from Analog Devices. It features a maximum sample rate of 1 MSPS and is housed in a 24-lead LFCSP (4x4 mm) package. The device integrates per-channel averaging filters, reducing the digital filter burden on the host processor. With its Easy Drive architecture, the AD4694 simplifies analog front-end design by eliminating the need for external high-bandwidth drivers, making it ideal for high-impedance sensor interfaces. An ADC (analog-to-digital converter) is a device that converts continuous analog signals into discrete digital codes. The SAR ADC is a common type that uses a binary search algorithm to approximate the input voltage, offering a good balance of speed, resolution, and power consumption. The AD4694 belongs to the data acquisition subsystem, converting real-world signals into digital data for processing by microcontrollers, DSPs, or FPGAs. Key features include 16-bit resolution, 8 multiplexed input channels, 1 MSPS throughput, and an Easy Drive input stage that allows direct connection to high-impedance sources without external buffers. The per-channel averaging filters improve noise performance and reduce host processing overhead. The device operates from a single 2.3V to 5.5V supply, with a separate digital interface supply for flexible logic levels. The AD4694 uses a charge-redistribution SAR architecture with an internal reference buffer, achieving excellent linearity and low power consumption. The Easy Drive feature reduces input current spikes, enabling direct sensor connection. The device includes a flexible serial interface (SPI) that supports daisy-chaining and multiple devices on a single bus. Typical applications include industrial process control, battery monitoring, medical instrumentation, and data acquisition systems. The high input impedance and per-channel filtering make it suitable for direct connection to sensors such as thermocouples, RTDs, and strain gauges. When designing with the AD4694, ensure proper decoupling of the AVDD and DVDD supplies, and place the reference decoupling capacitor close to the REF pin. The Easy Drive input stage allows high source impedance, but the acquisition time must be considered at maximum sample rates.

询价 联系我们
AD4695BCPZ - 16-Bit 16-Ch 500kSPS SAR ADC | Analog Devices
AD4695BCPZ

AD4695BCPZ - 16-Bit 16-Ch 500kSPS SAR ADC | Analog Devices

The AD4695BCPZ is a 16-bit, 16-channel, 500 kSPS successive approximation register (SAR) analog-to-digital converter (ADC) from Analog Devices. It features Easy Drive technology that enables high-impedance analog inputs and reference inputs, simplifying system design by eliminating the need for dedicated high-speed ADC drivers and reference buffers. The device operates from a single 1.8V supply and communicates via a serial interface, packaged in a 32-lead LFCSP-WQ (5x5 mm). An ADC (analog-to-digital converter) is an electronic component that converts continuous analog signals into discrete digital values for processing by digital systems. The AD4695BCPZ belongs to the SAR ADC family, which uses a successive approximation register algorithm to achieve high-speed, high-resolution conversion with low power consumption. SAR ADCs are widely used in data acquisition systems, industrial automation, and medical instrumentation where accuracy and speed are critical. Key features of the AD4695BCPZ include 16-bit resolution, 16 multiplexed input channels, and a maximum sampling rate of 500 kSPS. The Easy Drive architecture allows direct connection to high-impedance sensors without external buffers, reducing component count and board space. The device also offers a high-Z mode for both analog inputs and reference inputs, further simplifying system design. The LFCSP package provides excellent thermal performance and a compact footprint for space-constrained applications. Technically, the AD4695BCPZ integrates a capacitive DAC and comparator, achieving excellent linearity and low noise. The serial interface supports multiple devices on a single bus, enabling scalable multi-channel acquisition systems. The device includes an internal reference buffer (in the WLCSP option) and supports external references for flexibility. The ADC operates over a wide temperature range, making it suitable for industrial environments. Typical applications include industrial process control, battery-powered instrumentation, medical monitoring, and data acquisition systems. The high input impedance and Easy Drive features make it ideal for directly interfacing with sensors such as thermocouples, strain gauges, and pressure transducers. The 16-channel multiplexer allows monitoring multiple signals with a single ADC, reducing system cost. When designing with the AD4695BCPZ, ensure proper decoupling of the supply and reference pins with low-ESR capacitors. The serial interface should be isolated from noisy digital lines to maintain conversion accuracy. The device's high-Z mode reduces input current, but the source impedance should still be considered to avoid settling time errors.

询价 联系我们
AD4696BCPZ - 16-Bit 16-Channel SAR ADC | Analog Devices
AD4696BCPZ

AD4696BCPZ - 16-Bit 16-Channel SAR ADC | Analog Devices

The AD4696BCPZ from Analog Devices is a 16-bit, 16-channel, 1 MSPS successive approximation register (SAR) analog-to-digital converter (ADC) featuring a multiplexed front end with Easy Drive technology. Housed in a 32-lead LFCSP-WQ (5x5 mm) package, this device simplifies signal conditioning by eliminating the need for external drivers in many applications. It operates from a single 2.5V to 5.5V analog supply and a 1.8V to 5.5V digital interface supply, making it versatile for various system power rails. A SAR ADC is a type of analog-to-digital converter that uses a binary search algorithm to convert an analog input into a digital output. It is known for its high speed, low power, and excellent accuracy, making it ideal for applications such as industrial process control, data acquisition systems, and medical instrumentation. The AD4696 belongs to the family of SAR ADCs, which are a subset of data converters, which in turn are part of the broader category of mixed-signal integrated circuits. Key features of the AD4696BCPZ include 16 single-ended or 8 differential input channels, a maximum sampling rate of 1 MSPS, and an SPI-compatible serial interface. The device offers a signal-to-noise ratio (SNR) of 95.5 dB and a total harmonic distortion (THD) of -110 dB, ensuring high-fidelity conversion. It also includes an on-chip 2.5V reference buffer, a temperature sensor, and a customizable channel sequencer, reducing the burden on the host processor. The AD4696 uses a charge redistribution architecture with a capacitive DAC, achieving excellent linearity and low power consumption. The Easy Drive feature reduces the input current requirement, allowing direct connection to high-impedance sources without external buffers. The device also supports oversampling and decimation to improve noise performance at lower effective sampling rates. Typical applications include industrial automation, battery-powered instrumentation, and medical monitoring systems. Its high channel count and Easy Drive capability make it particularly suitable for multi-channel data acquisition where PCB area and power are constrained. When designing with the AD4696BCPZ, ensure proper decoupling of the analog and digital supplies and place the reference decoupling capacitor close to the REF pin. The SPI interface should be isolated from noisy digital traces to maintain conversion accuracy.

询价 联系我们
AD4697BCPZ - 16-Bit 8-Ch SAR ADC | Analog Devices
AD4697BCPZ

AD4697BCPZ - 16-Bit 8-Ch SAR ADC | Analog Devices

The AD4697BCPZ is a 16-bit, 8-channel, 500 kSPS/1 MSPS Easy Drive multiplexed successive approximation register (SAR) analog-to-digital converter (ADC) from Analog Devices Inc., packaged in a compact 24-lead LFCSP (4x4 mm). It converts up to eight multiplexed analog inputs with true 16-bit precision, making it an efficient building block for multichannel data acquisition systems where board space and front-end simplicity are important. What is a SAR ADC? A successive approximation register ADC is a type of analog-to-digital converter that uses a binary-search algorithm to determine the digital code closest to the analog input voltage. SAR converters are well known for their low power, moderate-to-high resolution, and fast conversion times compared to delta-sigma converters. In the hierarchy of signal chains, a SAR ADC follows the analog front-end (sensors, amplifiers, filters) and precedes the digital processor; its output feeds microcontrollers, DSPs, or FPGAs. The AD4697 fits this role as a precision measurement core, converting multiplexed analog signals into clean digital words. Key features of the AD4697BCPZ include the Easy Drive input architecture, which provides a high-Z analog input mode and a high-Z reference input mode. According to the Analog Devices product page, this simplifies system design by removing the need for dedicated high-speed ADC drivers and reference buffers, reducing component count and increasing channel density. The WLCSP option of the AD4697/AD4698 family includes an internal reference buffer for a true buffered reference input. The LFCSP-24 package measures only 4 mm x 4 mm and is surface-mount compatible. Architecturally, the AD4697 uses a multiplexed SAR core that sequentially samples each of the eight inputs. The high-Z input mode enables direct connection to many sensor types, while the high-Z reference input supports a precision external reference without extra buffering. Distributor listings from DigiKey and Mouser confirm 16-bit resolution, 8 input channels, SAR architecture, and 500 kSPS throughput; the family is also described as a 500 kSPS/1 MSPS device in datasheet aggregator listings. Typical applications include industrial process control with multiple 4-20 mA or voltage sensors, battery management system monitoring for cell voltages and temperatures, medical instrumentation such as patient monitors, power line monitoring, and general test and measurement data acquisition modules. The small package and high channel count make the AD4697 well suited to dense PCBs. When designing with this ADC, pay attention to input settling: after the multiplexer switches channels, allow sufficient acquisition time for the sampling capacitor to settle. Decouple the supply pins with 0.1 uF and 10 uF capacitors, connect the exposed pad to ground, and use a stable external reference such as the REF192ESZ for best accuracy.

询价 联系我们
AD4698BCPZ - 16-Bit 1 MSPS 8-Ch SAR ADC | Analog Devices
AD4698BCPZ

AD4698BCPZ - 16-Bit 1 MSPS 8-Ch SAR ADC | Analog Devices

The AD4698BCPZ from Analog Devices is a compact, high accuracy, low power, 8-channel, 16-bit, 1 MSPS multiplexed input precision successive approximation register (SAR) analog-to-digital converter (ADC) with Easy Drive features and extensive digital functions. It is available in a 24-lead LFCSP (4x4 mm) package, making it suitable for space-constrained industrial and instrumentation applications. A SAR ADC is a type of analog-to-digital converter that uses a successive approximation register to convert an analog input signal into a digital output. It operates by comparing the input voltage against a series of binary-weighted reference voltages, refining the approximation until the digital output matches the input within the converter's resolution. SAR ADCs are known for their high speed, low power consumption, and ease of use, making them a popular choice in data acquisition systems, industrial process control, and medical instrumentation. Key features of the AD4698BCPZ include 16-bit resolution, 8 input channels, a maximum sampling rate of 1 MSPS, and an SPI interface. The device operates with an analog supply voltage of 3.15 V to 5.5 V, and features Easy Drive technology that simplifies the analog front-end design by reducing input drive requirements. The ADC also includes a high-speed serial interface, a reference input, and a temperature sensor, enabling comprehensive system monitoring. The AD4698BCPZ is designed for high accuracy and low power, with a typical power consumption of [DATA_NEEDED: power consumption] mW at 1 MSPS. The device includes a 16-bit SAR core, an internal reference buffer, and a flexible digital interface that supports multiple operating modes. The Easy Drive feature reduces the input current and charge kickback, allowing direct connection to sensors without external buffers, which simplifies the design and reduces component count. Typical applications include industrial process control, data acquisition systems, medical instrumentation, and battery-powered devices. The AD4698BCPZ is also suitable for multi-channel monitoring systems where high accuracy and low power are critical. Its small package and low power consumption make it ideal for portable and space-constrained designs. When designing with the AD4698BCPZ, ensure that the analog input signal is within the specified input range and that the reference voltage is stable. The SPI interface should be configured for the desired sampling rate and data format. Proper decoupling of the power supply and reference pins is essential for achieving the specified performance.

询价 联系我们
AD4851BCPZ - 16-Bit 4-Ch Simultaneous Sampling DAS | Analog Devices
AD4851BCPZ

AD4851BCPZ - 16-Bit 4-Ch Simultaneous Sampling DAS | Analog Devices

The AD4851BCPZ is a fully buffered, 4-channel simultaneous sampling, 16-bit, 250kSPS data acquisition system (DAS) from Analog Devices. It integrates four internal buffer amplifiers, a 16-bit SAR ADC, an internal 4.096V reference and reference buffer, and supply decoupling capacitors, all in a compact 64-ball BGA (7x7 mm) package. Operating from a single 5V supply, it delivers 36mW per channel at 250kSPS, scaling with throughput. The device features differential, wide common-mode range inputs with ±75pA typical input leakage at 25°C and full-scale input step settling time of less than 300ns. A data acquisition system (DAS) is a complete signal chain that conditions, samples, and converts analog signals to digital words. The AD4851 integrates the input buffer, ADC, and reference, reducing external component count and simplifying design. It sits within the hierarchy: DAS -> ADC -> data converter -> mixed-signal IC -> semiconductor. This integration is critical for multi-channel systems where board space and channel-to-channel matching are paramount. Key features include simultaneous sampling of four channels, ensuring phase-accurate capture of multi-phase signals, and a wide common-mode input range that accommodates various sensor outputs without external level shifting. The integrated reference and buffer eliminate the need for external reference circuitry, while internal supply decoupling capacitors reduce external bypass requirements. The device operates over the industrial temperature range and is recommended for new designs. Architecturally, the AD4851 uses a successive approximation register (SAR) architecture, offering a balance of speed, resolution, and power. The internal buffers present a high-impedance input to the sensor, minimizing loading and preserving signal integrity. The wide common-mode range allows direct connection to differential signals with large offsets, simplifying front-end design. The 250kSPS per channel throughput supports high-speed industrial and instrumentation applications. Typical applications include motor control (phase current and voltage sensing), power monitoring, vibration analysis, and multi-phase power quality measurement. The simultaneous sampling capability is essential for accurate power calculations in three-phase systems. The device's low power and small footprint make it suitable for portable and space-constrained designs. When designing with the AD4851, ensure adequate decoupling on the supply pins and a clean reference voltage. The internal reference is 4.096V, but an external reference can be used if higher accuracy is required. The SPI interface simplifies connection to microcontrollers and DSPs. Careful PCB layout, with short analog input traces and a solid ground plane, is essential to achieve the specified performance.

询价 联系我们
AD4852BCPZ - 20-Bit 250kSPS 4-Ch DAS | Analog Devices
AD4852BCPZ

AD4852BCPZ - 20-Bit 250kSPS 4-Ch DAS | Analog Devices

The AD4852BCPZ from Analog Devices is a fully buffered, 4-channel simultaneous sampling, 20-bit, 250kSPS data acquisition system (DAS) with differential, wide common-mode range inputs. It integrates a complete signal chain including input buffers, a 20-bit SAR ADC, an internal reference and reference buffer, and supply decoupling capacitors, all in a compact 64-lead LFCSP package. Operating from a 5V low-voltage supply, it delivers 36mW per channel at 250kSPS, scaling with throughput for power-efficient designs. A data acquisition system (DAS) is a complete signal chain that conditions, samples, and converts analog signals into digital data. The AD4852 integrates the analog front-end, ADC, and reference, simplifying design and reducing component count. It sits within the hierarchy: DAS -> ADC -> data converter -> mixed-signal IC -> semiconductor. This integration is critical for high-channel-count systems where board space and power are at a premium. Key features include ±75pA typical input leakage at 25°C, full-scale input step settling time of less than 300ns, and an integrated 4.096V reference. The differential inputs with wide common-mode range allow direct connection to sensors and transducers without external conditioning. The device also features a flexible digital interface supporting SPI and daisy-chain modes, enabling multiple devices to be cascaded for higher channel counts. Technically, the AD4852 uses a successive approximation register (SAR) architecture with internal buffering, eliminating the need for external driver amplifiers. The integrated reference buffer ensures stable and accurate conversions over temperature. The device includes a temperature sensor and a 1.024V output for system diagnostics. Its power dissipation scales with throughput, making it suitable for battery-powered and thermal-constrained applications. Typical applications include industrial automation, motor control, power line monitoring, and multi-phase energy metering. The simultaneous sampling capability is essential for applications requiring phase-accurate measurements across multiple channels, such as three-phase power monitoring and vibration analysis. The wide common-mode input range and high input impedance simplify sensor interfacing. When designing with the AD4852, ensure adequate decoupling on the AVDD and DVDD supplies, and use the integrated reference buffer to drive the reference input. The device supports a 1.8V to 5V digital interface, allowing direct connection to modern microcontrollers and FPGAs. For optimal performance, follow the layout guidelines in the datasheet, including a solid ground plane and minimal trace lengths on the analog inputs.

询价 联系我们
AD4853BCPZ - 16-Bit 4-Ch 1MSPS DAS | Analog Devices
AD4853BCPZ

AD4853BCPZ - 16-Bit 4-Ch 1MSPS DAS | Analog Devices

The AD4853BCPZ is a complete 16-bit data acquisition system (DAS) from Analog Devices, featuring simultaneous sampling of four internally buffered channels at 1 MSPS per channel. It integrates a 16-bit successive approximation register (SAR) ADC, input buffers, a precision 4.096V reference and reference buffer, and supply decoupling capacitors, all in a 64-ball BGA (7x7 mm) package. The device operates from a 4.75V to 5.25V analog supply and supports differential, wide common-mode range inputs with ±75 pA typical input leakage at 25°C. Full-scale input step settling time is less than 300 ns, and power dissipation is 57 mW per channel at 1 MSPS, scaling with throughput. A data acquisition system (DAS) is a complete signal chain that converts analog signals into digital data, typically integrating an ADC, input conditioning, and reference circuitry. The AD4853 is a buffered, simultaneous-sampling DAS, meaning it includes internal input buffers that eliminate the need for external op-amps and allows direct connection to sensors. It belongs to the hierarchy: DAS -> ADC -> data converter -> mixed-signal IC -> semiconductor. This integration simplifies design, reduces board space, and improves performance by minimizing external component variability. Key features include 16-bit resolution, 1 MSPS throughput per channel, four simultaneously sampled channels, and an integrated reference. The device offers a 94.6 dB signal-to-noise ratio (SNR) and 0.2 LSB typical integral nonlinearity (INL). It supports both SPI and LVDS digital interfaces, making it versatile for high-speed data transfer. The input range is bipolar, and the device can be configured for external or built-in reference operation. Technically, the AD4853 uses a SAR architecture with internal input buffers that provide high input impedance and low leakage, enabling direct sensor connection. The integrated reference and buffer ensure stable and accurate conversions. The device includes power scaling, reducing power consumption at lower throughputs, which is critical for battery-powered applications. The 64-ball BGA package (7x7 mm) offers a compact footprint with excellent thermal performance. Typical applications include industrial automation, motor control, power monitoring, and medical instrumentation. In motor control, the simultaneous sampling of three-phase currents and voltages enables accurate vector control. In power monitoring, the high SNR and low leakage ensure precise measurement of voltage and current waveforms. The device's wide common-mode range and differential inputs make it suitable for shunt-based current sensing. When designing with the AD4853, ensure proper decoupling of the analog and digital supplies, and use a low-noise reference. The integrated reference simplifies design, but for higher accuracy, an external reference can be used. The SPI interface allows easy connection to microcontrollers, while LVDS is available for high-speed data transfer over longer distances.

询价 联系我们
AD4854BCPZ - 20-Bit 4-Ch 1MSPS DAS | Analog Devices
AD4854BCPZ

AD4854BCPZ - 20-Bit 4-Ch 1MSPS DAS | Analog Devices

The AD4854BCPZ is a complete 20-bit data acquisition system (DAS) from Analog Devices, featuring simultaneous sampling of four internally buffered channels at 1 MSPS per channel. It integrates a precision ADC, input buffers, a 4.096V reference and reference buffer, and supply decoupling capacitors, reducing external component count and simplifying design. The device operates from a single 5V supply and supports differential inputs with a wide common-mode range, making it suitable for high-performance industrial and instrumentation applications. A data acquisition system (DAS) is a complete signal chain that converts analog signals into digital data, typically including input conditioning, an ADC, and a reference. The AD4854 integrates these functions into a single IC, providing a compact solution for multi-channel simultaneous sampling. It belongs to the family of precision data converters, which are essential in applications requiring high accuracy and speed, such as motor control, power monitoring, and vibration analysis. Key features include 20-bit resolution, 1 MSPS throughput per channel, ±75 pA typical input leakage at 25°C, and a full-scale input step settling time of less than 300 ns. The integrated reference and buffer provide a stable 4.096V reference, while the internal supply decoupling capacitors minimize external filtering. Power consumption is 57 mW per channel at 1 MSPS, scaling with throughput, which is efficient for multi-channel systems. The AD4854 uses a successive approximation register (SAR) architecture with internal input buffers, allowing direct connection to sensors without external drivers. The wide common-mode input range and differential inputs reject common-mode noise, improving measurement accuracy. The device operates over an extended industrial temperature range of -40°C to +125°C, ensuring reliability in harsh environments. Typical applications include industrial automation, motor control, power quality monitoring, and vibration analysis. The simultaneous sampling capability is critical for applications requiring phase-accurate measurements across multiple channels, such as three-phase power monitoring. The integrated reference and buffers reduce BOM cost and board space, making it ideal for space-constrained designs. When designing with the AD4854, ensure proper decoupling of the supply pins and use a low-noise reference for optimal performance. The device supports both LVDS and CMOS digital interfaces, providing flexibility in system integration. For best results, follow the layout guidelines in the datasheet to minimize noise and achieve full 20-bit performance.

询价 联系我们