集成电路

子分类

📁 ADC/DAC 3,100+ 产品 📁 放大器IC 1,900+ 产品 📁 音频编解码器 18 产品 📁 音频IC 2 产品 📁 时钟与计时 660+ 产品 📁 Comparator ICs 1 产品 📁 DSP 1,100+ 产品 📁 数据采集IC 2 产品 📁 数字电位器 4 产品 📁 显示驱动与控制器 1 产品 📁 FPGA与CPLD 7,300+ 产品 📁 接口IC 3,300+ 产品 📁 LED驱动器 1 产品 📁 逻辑IC 460+ 产品 📁 存储IC 870+ 产品 📁 微控制器 20,000+ 产品 📁 微处理器 4 产品 📁 电机驱动器 1 产品 📁 其他 1 产品 📁 Sensor and Detector Interfaces 1 产品 📁 专用IC 15 产品 📁 视频IC 14 产品

产品（39,000+)

MSP430F1491IRTDR - 8MHz 60KB Flash MCU | Texas Instruments
MSP430F1491IRTDR

MSP430F1491IRTDR - 8MHz 60KB Flash MCU | Texas Instruments

The Texas Instruments MSP430F1491IRTDR is an 8 MHz, 16-bit ultra-low-power mixed-signal microcontroller with 60 KB Flash memory, 2 KB SRAM, a 12-bit ADC, comparator, SPI, and UART interfaces in a 64-pin VQFNP (RTD) package. It is designed for embedded control and portable measurement systems that require efficient processing, mixed-signal acquisition, and low-power operation. An MCU is a programmable system-on-chip that integrates a CPU, memory, and peripherals. The MSP430 family uses a 16-bit RISC architecture with 16-bit registers and constant generators to support efficient control and measurement workloads. The MSP430F1491IRTDR combines this processing core with Flash and SRAM memory and mixed-signal peripherals, positioning it between a basic microcontroller and a more specialized embedded controller. Verified source data identifies an 8 MHz CPU, 60 KB Flash organized as 60K x 8 plus 256 bytes, 2 KB SRAM, and a 12-bit ADC. The device also includes a comparator plus SPI and UART connectivity. The 64-pin VQFNP package exposes the integrated mixed-signal and communication resources while supporting compact surface-mount placement. Detailed electrical limits, memory-map details, and peripheral pin assignments require the manufacturer datasheet. The MSP430 architecture is intended for low-power embedded systems. The supplied manufacturer description specifically identifies the MSP430 family as ultra-low-power, while the distributor listing identifies this part as an MSP430x1xx mixed-signal microcontroller. These characteristics make the MCU relevant to battery-operated instruments, embedded sensing nodes, industrial measurement systems, and low-power control products. Typical design considerations include confirming the device's supply-voltage limits, ADC input range, clock configuration, communication-pin mapping, and exposed-pad layout against the datasheet. Because the verified data does not provide operating voltage, temperature, ADC input-channel count, GPIO count, or exact timing limits, those values are marked as data needed rather than inferred. The source data also identifies no verified price or current stock quantity, so commercial details should be confirmed with the supplier. This page combines verified manufacturer and distributor attributes with application guidance, comparison considerations, and design notes intended to support early engineering evaluation. It does not substitute for the complete Texas Instruments datasheet, which remains the controlling source for pinout, electrical characteristics, timing, memory behavior, and qualification information.

询价 联系我们
MSP430F1491IRTDT - 8MHz 60KB MCU | Texas Instruments
MSP430F1491IRTDT

MSP430F1491IRTDT - 8MHz 60KB MCU | Texas Instruments

The Texas Instruments MSP430F1491IRTDT is an 8 MHz, 16-bit ultra-low-power mixed-signal microcontroller with 60 KB Flash memory, 2 KB SRAM, a 12-bit ADC, comparator, SPI, and UART, housed in a 64-pin VQFN RTD package with exposed pad. Its 1.8 V to 3.6 V supply range and low-power operating modes suit embedded measurement, control, and communication systems. A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one device. The MSP430F1491 belongs to the mixed-signal microcontroller family, combining general-purpose embedded control with analog measurement peripherals. Its RISC-based MSP430 architecture, 16-bit registers, and constant generators support efficient code execution for low-power embedded products. The device provides 60 KB of Flash, including 256 bytes identified by the distributor data, and 2 KB of SRAM for firmware and working data. The 12-bit ADC enables sensor and voltage measurements, while the comparator supports threshold detection and low-power signal monitoring. SPI and UART peripherals provide interfaces to sensors, transceivers, displays, and service equipment. Its low-power design includes active, standby, and off modes. The verified data reports 280 µA active current at 1 MHz and 2.2 V, 1.6 µA standby current, and 0.1 µA off current with RAM retention. Standby wakeup is reported in less than 6 µs, which helps reduce response delay in duty-cycled systems. Typical applications include battery-powered instrumentation, industrial sensor nodes, data loggers, communications equipment, motor and process-control products, and portable measurement systems. The 8 MHz CPU and mixed-signal peripherals make the MCU appropriate when several analog inputs and serial interfaces must share a compact embedded platform. Designers should provide the required bypass capacitors, route the exposed-pad thermal and ground connection according to the manufacturer datasheet, and verify that serial interface levels match the attached peripherals. The 3.3 V operating target also requires attention to input thresholds, output drive, and power-budget calculations before PCB release. This product record combines the verified manufacturer identification with distributor package and memory details, practical application guidance, and explicit data gaps where the supplied sources do not provide complete electrical or lifecycle information. It is intended to support engineering selection rather than replace the manufacturer datasheet for production design.

询价 联系我们
MSP430F149CY - 16-Bit 8MHz Mixed-Signal MCU | Texas Instruments
MSP430F149CY

MSP430F149CY - 16-Bit 8MHz Mixed-Signal MCU | Texas Instruments

The Texas Instruments MSP430F149CY is a 16-bit mixed-signal microcontroller operating at 8 MHz, with 60 KB of Flash memory, 2 KB of SRAM, a 12-bit ADC, two USARTs, SPI support, and 48 I/O pins in a 64-lead LQFP package. The device is designed for low-power embedded control, instrumentation, sensor acquisition, and communications systems. A mixed-signal microcontroller combines a digital processor with analog and communication peripherals on one integrated device. The MSP430 CPU uses a 16-bit RISC architecture and provides the processing foundation for control firmware, while the ADC enables direct measurement of analog inputs without a separate external converter. In the power-management hierarchy, the MSP430 family targets embedded systems where low power consumption and compact integration are important. The verified MSP430F149 family information identifies an 8 MHz clock, 60 KB of Flash program memory, 2 KB of SRAM, a 12-bit ADC, a comparator, SPI, and UART/USART connectivity. The MSP430F14x family also provides two 16-bit timers and a hardware multiplier, while the MSP430F149 specifically supports two USARTs. These peripherals reduce external component count and provide useful mixed-signal integration for sensor, control, and data-acquisition products. The MSP430F149CY is identified in distributor results as an MSP430x1xx mixed-signal microcontroller with a 16-bit CPU, 8 MHz speed, and 60 KB Flash memory. The C Y suffix and the distributor listings indicate the packaged ordering variant, while the exact temperature range, voltage limits, pin names, package dimensions, and electrical limits were not supplied in the verified data and must be confirmed from the manufacturer datasheet before design release. Typical applications include battery-powered industrial sensors, portable measurement instruments, building and environmental monitoring, motor or actuator control, low-power data loggers, and connected embedded systems. The ADC supports analog sensor conditioning, and the two USARTs support external sensors, radios, displays, or host controllers. The SPI interface can connect to higher-speed peripherals when the application requires it. Designers should budget analog conditioning around the ADC, validate the exact MSP430F149CY pinout and package details, and confirm clock, memory, peripheral, and power requirements against the TI datasheet. This page synthesizes the verified distributor and manufacturer information, while clearly separating unavailable technical values from confirmed specifications.

询价 联系我们
MSP430F149IPAG - 8MHz 16-Bit MCU with 60KB Flash | TI
MSP430F149IPAG

MSP430F149IPAG - 8MHz 16-Bit MCU with 60KB Flash | TI

The Texas Instruments MSP430F149IPAG is a 16-bit ultra-low-power mixed-signal microcontroller operating at 8 MHz, with 60 KB of Flash memory, 2 KB of SRAM, a 12-bit ADC, comparator, SPI, and UART interfaces, housed in a 64-TQFP package. It combines a RISC-style MSP430 CPU, 16-bit registers, constant generators, and integrated analog and communications peripherals for compact embedded control systems. What is a mixed-signal microcontroller? A mixed-signal MCU combines digital processing with analog measurement or control functions on one integrated circuit. The MSP430F149 belongs to the MSP430 family of 16-bit RISC microcontrollers and sits within the broader semiconductor and embedded-control hierarchy. Its integrated ADC and comparator reduce external component count, while Flash and SRAM support firmware storage and working memory in low-power embedded products. The device provides an 8 MHz maximum clock, 60 KB Flash, and 2 KB SRAM according to the Texas Instruments product listing. Its 12-bit ADC supports analog measurement tasks, while the comparator is useful for threshold and signal monitoring. SPI and UART peripherals provide serial connectivity, and the integrated hardware multiplier supports efficient arithmetic in control and signal-processing firmware. These features make the MCU suitable for industrial instrumentation, sensor nodes, embedded measurement systems, and low-power data-acquisition equipment. The MSP430 architecture emphasizes efficient execution through a 16-bit RISC CPU, 16-bit registers, and constant generators. Its mixed-signal peripheral set allows a design to acquire analog inputs and communicate through serial interfaces without requiring several separate devices. The exact pin assignments and electrical limits must be confirmed against the manufacturer datasheet before layout or firmware deployment. Typical applications include low-power sensor interfaces, industrial measurement, building-control equipment, portable instrumentation, and embedded systems that require ADC conversion plus serial communications. The 64-TQFP package provides a conventional surface-mount footprint with many externally accessible peripheral and power pins, making it appropriate for designs that value a high pin count and broad integration. Designers should verify package dimensions, pin multiplexing, ADC reference requirements, serial-interface configuration, and low-power-mode behavior using the MSP430F14x, MSP430F14x1, and MSP430F13x datasheet. Keep analog and digital return paths controlled, place decoupling capacitors near the supply pins, and confirm startup and brownout requirements in the complete system design. This page synthesizes verified distributor data, manufacturer resources, and engineering guidance for MSP430F149IPAG selection.

询价 联系我们
MSP430F149IPAGR - 8MHz 16-Bit MCU with 60KB Flash | TI (Tape & Reel)
MSP430F149IPAGR

MSP430F149IPAGR - 8MHz 16-Bit MCU with 60KB Flash | TI (Tape & Reel)

The Texas Instruments MSP430F149IPAGR is a 16-bit ultra-low-power mixed-signal microcontroller operating at 8 MHz, with 60 KB of Flash memory, 2 KB of SRAM, a 12-bit ADC, comparator, SPI, and UART interfaces, housed in a 64-TQFP package. It combines a RISC-style MSP430 CPU, 16-bit registers, constant generators, and integrated analog and communications peripherals for compact embedded control systems. What is a mixed-signal microcontroller? A mixed-signal MCU combines digital processing with analog measurement or control functions on one integrated circuit. The MSP430F149 belongs to the MSP430 family of 16-bit RISC microcontrollers and sits within the broader semiconductor and embedded-control hierarchy. Its integrated ADC and comparator reduce external component count, while Flash and SRAM support firmware storage and working memory in low-power embedded products. The device provides an 8 MHz maximum clock, 60 KB Flash, and 2 KB SRAM according to the Texas Instruments product listing. Its 12-bit ADC supports analog measurement tasks, while the comparator is useful for threshold and signal monitoring. SPI and UART peripherals provide serial connectivity, and the integrated hardware multiplier supports efficient arithmetic in control and signal-processing firmware. These features make the MCU suitable for industrial instrumentation, sensor nodes, embedded measurement systems, and low-power data-acquisition equipment. The MSP430 architecture emphasizes efficient execution through a 16-bit RISC CPU, 16-bit registers, and constant generators. Its mixed-signal peripheral set allows a design to acquire analog inputs and communicate through serial interfaces without requiring several separate devices. The exact pin assignments and electrical limits must be confirmed against the manufacturer datasheet before layout or firmware deployment. Typical applications include low-power sensor interfaces, industrial measurement, building-control equipment, portable instrumentation, and embedded systems that require ADC conversion plus serial communications. The 64-TQFP package provides a conventional surface-mount footprint with many externally accessible peripheral and power pins, making it appropriate for designs that value a high pin count and broad integration. Designers should verify package dimensions, pin multiplexing, ADC reference requirements, serial-interface configuration, and low-power-mode behavior using the MSP430F14x, MSP430F14x1, and MSP430F13x datasheet. Keep analog and digital return paths controlled, place decoupling capacitors near the supply pins, and confirm startup and brownout requirements in the complete system design. This page synthesizes verified distributor data, manufacturer resources, and engineering guidance for MSP430F149IPAGR selection.

询价 联系我们
MSP430F149IPM - 8MHz 16-bit MCU, 60KB Flash, 64-LQFP | TI
MSP430F149IPM

MSP430F149IPM - 8MHz 16-bit MCU, 60KB Flash, 64-LQFP | TI

The Texas Instruments MSP430F149IPM is a 16-bit ultra-low-power RISC microcontroller built around the MSP430 CPU16 core, running at 8 MHz and integrating 60 KB Flash plus 2 KB SRAM on-chip. It is housed in a 64-pin LQFP (PM, 10x10 mm) package suited to industrial and instrumentation designs that need analog integration and low standby current. The device combines a 12-bit ADC, dual 12-bit DACs, a comparator, two USART peripherals (UART/SPI/I2C), an I2C interface, a hardware multiplier, and five low-power operating modes tuned for battery-driven systems. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals on one silicon die. The MSP430 platform in particular is an ultra-low-power mixed-signal architecture: it merges a 16-bit RISC CPU with high-resolution analog peripherals, placing it in the taxonomy of mixed-signal microcontroller -> microcontroller -> embedded processor -> semiconductor IC. Its five power-saving modes and sub-microamp wake-up time are the defining characteristics that differentiate it from general-purpose MCUs in portable measurement roles. Key features include a 1.8 V to 3.6 V supply range, 280 µA active current at 1 MHz / 2.2 V, 1.6 µA standby current, 0.1 µA RAM-retention off-mode current, and wake-up from standby in less than 6 µs. The 12-bit SAR ADC offers 8 input channels with up to 200 ksps conversion rate, while the dual 12-bit DACs support 12-bit monotonic output for calibration or setpoint generation. Sixteen timers (including two 16-bit timers with capture/compare and a watchdog), an embedded 32 kHz real-time clock oscillator, and on-chip JTAG/Spy-Bi-Wire debug round out the peripheral set. Typical applications include portable medical instrumentation, smart utility meters, battery-powered sensor nodes, industrial data loggers, and consumer remote controls. Its small code footprint and ultra-low standby consumption make it well suited for designs that spend most of their time in sleep and wake briefly for sampling or communications. When designing with this part, place decoupling capacitors within a few millimeters of the AVCC/DVCC pins, keep the analog reference trace short, and route the 32 kHz crystal traces symmetrically with a guard ground. The wide Vcc range allows direct connection to a single lithium cell or two alkaline cells, but a regulator is still recommended for ADC precision. This page synthesizes distributor pricing, drop-in alternatives, and practical design guidance that goes beyond the manufacturer datasheet.

询价 联系我们
MSP430F149IPMG4 - 8MHz 16-Bit Ultra-Low-Power MCU | TI
MSP430F149IPMG4

MSP430F149IPMG4 - 8MHz 16-Bit Ultra-Low-Power MCU | TI

The Texas Instruments MSP430F149IPMG4 is an 8 MHz, 16-bit ultra-low-power mixed-signal microcontroller with 60 KB of Flash memory, 2 KB of SRAM, a 12-bit ADC, comparator, SPI, and UART support, housed in a 64-LQFP 10 x 10 mm package. It operates from a 1.8 V to 3.6 V supply and is designed for embedded systems requiring efficient processing, analog measurement, and low standby current. A microcontroller is a programmable system-on-chip that integrates a CPU, memory, and peripherals to control a product. The MSP430F149 belongs to the MSP430 family of 16-bit RISC mixed-signal microcontrollers, combining digital processing with ADC and comparator functions. This device hierarchy places it between general-purpose embedded processors and simple peripheral controllers, making it suitable for instrumentation, sensing, communications, and low-power products. Key features include 8 MHz maximum clock operation, 60 KB Flash, 2 KB SRAM, 12-bit ADC, comparator, SPI, UART, 22 I/O ports, and five power-saving modes. The verified power figures include 280 uA active current at 1 MHz and 2.2 V, 1.6 uA standby current, and 0.1 uA off current with RAM retention. These characteristics support designs that spend substantial time waiting for events while still handling periodic control and measurement tasks. The MSP430 architecture uses a 16-bit RISC CPU with 16-bit registers and constant generators for code efficiency. Its mixed-signal peripherals allow an application to digitize analog inputs and compare signals without requiring a separate ADC or comparator. The 1.8 V to 3.6 V operating range also suits battery-powered and industrial embedded equipment, provided the design observes the device's electrical and timing limits. Typical applications include low-power sensor nodes, industrial measurement systems, battery-operated instruments, UART-connected controllers, SPI-based data acquisition, and portable monitoring equipment. The 60 KB Flash capacity supports substantially more application code than basic controllers, while the 2 KB SRAM provides working memory for buffering and control state. Designers should verify package pin assignments, clock setup, ADC reference configuration, and low-power transitions against the manufacturer datasheet before layout release. Keep decoupling close to the supply pins, provide a stable clock source, and confirm that the 64-LQFP footprint matches the PCB land pattern. The verified distributor data identifies the part as a 64-LQFP device, so footprint and pin-compatible replacement decisions must be based on the complete package drawing.

询价 联系我们
MSP430F149IPMR - 8MHz 16-bit MCU, 60KB Flash, 64-LQFP | TI (Tape & Reel)
MSP430F149IPMR

MSP430F149IPMR - 8MHz 16-bit MCU, 60KB Flash, 64-LQFP | TI (Tape & Reel)

The Texas Instruments MSP430F149IPMR is a 16-bit ultra-low-power RISC microcontroller built around the MSP430 CPU16 core, running at 8 MHz and integrating 60 KB Flash plus 2 KB SRAM on-chip. It is housed in a 64-pin LQFP (PM, 10x10 mm) package suited to industrial and instrumentation designs that need analog integration and low standby current. The device combines a 12-bit ADC, dual 12-bit DACs, a comparator, two USART peripherals (UART/SPI/I2C), an I2C interface, a hardware multiplier, and five low-power operating modes tuned for battery-driven systems. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals on one silicon die. The MSP430 platform in particular is an ultra-low-power mixed-signal architecture: it merges a 16-bit RISC CPU with high-resolution analog peripherals, placing it in the taxonomy of mixed-signal microcontroller -> microcontroller -> embedded processor -> semiconductor IC. Its five power-saving modes and sub-microamp wake-up time are the defining characteristics that differentiate it from general-purpose MCUs in portable measurement roles. Key features include a 1.8 V to 3.6 V supply range, 280 µA active current at 1 MHz / 2.2 V, 1.6 µA standby current, 0.1 µA RAM-retention off-mode current, and wake-up from standby in less than 6 µs. The 12-bit SAR ADC offers 8 input channels with up to 200 ksps conversion rate, while the dual 12-bit DACs support 12-bit monotonic output for calibration or setpoint generation. Sixteen timers (including two 16-bit timers with capture/compare and a watchdog), an embedded 32 kHz real-time clock oscillator, and on-chip JTAG/Spy-Bi-Wire debug round out the peripheral set. Typical applications include portable medical instrumentation, smart utility meters, battery-powered sensor nodes, industrial data loggers, and consumer remote controls. Its small code footprint and ultra-low standby consumption make it well suited for designs that spend most of their time in sleep and wake briefly for sampling or communications. When designing with this part, place decoupling capacitors within a few millimeters of the AVCC/DVCC pins, keep the analog reference trace short, and route the 32 kHz crystal traces symmetrically with a guard ground. The wide Vcc range allows direct connection to a single lithium cell or two alkaline cells, but a regulator is still recommended for ADC precision. This page synthesizes distributor pricing, drop-in alternatives, and practical design guidance that goes beyond the manufacturer datasheet.

询价 联系我们
MSP430F149IPMRG4 - 8MHz 16-Bit MCU with 60KB Flash | Texas Instruments
MSP430F149IPMRG4

MSP430F149IPMRG4 - 8MHz 16-Bit MCU with 60KB Flash | Texas Instruments

The Texas Instruments MSP430F149IPMRG4 is an 8 MHz, 16-bit ultra-low-power mixed-signal microcontroller with 60 KB of Flash memory, 2 KB of SRAM, a 12-bit ADC, two USARTs, SPI support, and a hardware multiplier, all housed in a 64-pin LQFP package. It is designed for embedded systems that require efficient control, analog measurement, serial communications, and low-power operation. What is a mixed-signal microcontroller? A mixed-signal MCU combines a digital processor with analog and communication peripherals on one integrated device. The MSP430F149 belongs to the MSP430 family of 16-bit RISC microcontrollers and sits within the broader hierarchy of embedded processors, microcontrollers, and semiconductor devices. Its mixed-signal architecture lets embedded products measure analog inputs, process control logic, and communicate with external peripherals without requiring several discrete components. Key features include an 8 MHz MSP430 CPU, 60 KB Flash plus 256 bytes of additional Flash storage as shown in the distributor data, 2 KB SRAM, 22 I/O ports, a 12-bit ADC, two USARTs, SPI, and a hardware multiplier. According to Texas Instruments, the MSP430F14x devices include two built-in 16-bit timers and 48 I/O pins at the device-family level, while the specific ordering information identifies the MSP430F149IPMRG4 as a 64-LQFP industrial-temperature part. The 16-bit RISC architecture, constant generators, and hardware multiplier improve code efficiency and arithmetic throughput for control applications. The 12-bit ADC supports embedded measurement systems, while the two USARTs provide serial connectivity for sensors, displays, data acquisition equipment, and industrial peripherals. The device also supports low-power modes for battery-operated and energy-conscious products. Typical applications include industrial instrumentation, sensor acquisition, motor and process control, embedded data loggers, communications equipment, low-power measurement systems, and compact control platforms. Its combination of local memory, analog conversion, timers, and serial interfaces makes it suitable for designs that need standalone mixed-signal control rather than a larger application processor. When designing a PCB around the MSP430F149IPMRG4, preserve the exposed-package thermal and electrical requirements, follow the manufacturer's recommended decoupling and layout guidance, and verify signal compatibility for every peripheral connection. Use the datasheet for the complete 64-pin pinout, electrical limits, clock configuration, and programming details.

询价 联系我们
MSP430F149IRTDR - 8MHz 60KB Flash 16-Bit MCU | Texas Instruments
MSP430F149IRTDR

MSP430F149IRTDR - 8MHz 60KB Flash 16-Bit MCU | Texas Instruments

The Texas Instruments MSP430F149IRTDR is an ultra-low-power 16-bit mixed-signal microcontroller with an 8 MHz CPU, 60 KB of Flash memory, 2 KB of SRAM, a 12-bit ADC, a comparator, and SPI/UART interfaces, supplied in a 64-pin VQFNP (RTD) package. The MSP430F149 belongs to the MSP430 family of RISC microcontrollers designed around low-power operation and multiple power-saving modes. An ultra-low-power microcontroller is an embedded controller that minimizes energy consumption during active operation, standby, and retention states. In the broader device hierarchy, the MSP430F149 is a microcontroller, a mixed-signal microcontroller, and an embedded processing IC. Its combination of Flash program memory, RAM, analog conversion capability, serial interfaces, and low-power modes supports both compact control systems and portable battery-powered instrumentation. The 60 KB Flash capacity provides room for application code, configuration data, and firmware updates. Its 2 KB SRAM supports working data, stack operations, and interrupt servicing. The 12-bit ADC enables analog measurement without requiring a separate converter, while the comparator supports threshold detection and simple signal conditioning. Two serial interfaces identified in the verified data are SPI and UART, allowing connection to sensors, displays, transceivers, and external data-acquisition equipment. The device operates from a 1.8 V to 3.6 V supply, making it suitable for low-voltage industrial and embedded systems. The verified operating range is industrial, and the MCU provides five power-saving modes according to the supplied product data. These characteristics are particularly valuable in instruments that spend substantial time idle, such as portable meters, environmental monitors, and industrial sensing nodes. The 64-pin VQFNP package provides access to the MCU's larger pin count and expanded peripheral set. Board-level implementation should preserve the datasheet's supply and decoupling requirements and account for exposed-pad thermal behavior where applicable. Because the supplied web results do not publish the complete RTD pin map, the pinout is conservatively reported as unavailable rather than reconstructed from memory. This page consolidates verified manufacturer and distributor information, package details, application guidance, and procurement considerations. It also distinguishes confirmed technical facts from parameters that require the full manufacturer datasheet, helping engineers evaluate the MSP430F149IRTDR without relying on unverified generic MCU assumptions.

询价 联系我们
MSP430F149IRTDRG4 - 16-Bit 8MHz MCU, 60KB Flash, 64-VQFN | TI
MSP430F149IRTDRG4

MSP430F149IRTDRG4 - 16-Bit 8MHz MCU, 60KB Flash, 64-VQFN | TI

The Texas Instruments MSP430F149IRTDRG4 is a 16-bit RISC mixed-signal microcontroller from the MSP430x1xx family, featuring a CPU16 core running at up to 8 MHz, 60 KB of Flash program memory (60K x 8 + 256B) and 2 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) exposed-pad package. It integrates a 12-bit analog-to-digital converter (ADC), a comparator, two 16-bit timers, a hardware multiplier, and two USART (SPI/UART) peripherals, delivering a broad code-compatible platform for ultra-low-power embedded designs. An MSP430 microcontroller is a 16-bit mixed-signal MCU family from Texas Instruments engineered specifically for ultra-low-power battery-operated applications. Within the broader taxonomy, the MSP430 sits in the hierarchy: MSP430 -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. The CPU16 core uses a von-Neumann-style address/data bus with 16-bit registers and orthogonal addressing, enabling compact C and assembly code while the proprietary MSP430 ISA preserves full family code compatibility from F1xx through F5xx. This positioning makes the F1xx series the legacy workhorse for portable instrumentation, smart sensors, and industrial metering designs. Key features include 48 GPIO lines, an 8-channel 12-bit ADC with integrated reference and sample-and-hold, a hardware multiplier that accelerates DSP-style operations, two 16-bit Timer_A blocks supporting capture/compare/PWM, two USART channels (one SPI, one UART or both configurable as SPI/UART), a real-time clock module, and five low-power modes drawing as little as 1.1 uA in LPM3 retention. The 60-VQFN exposed pad delivers a theta-JA of approximately 25-31 C/W with proper PCB copper area, suitable for thermally modest 8 MHz operation. Technical depth: The 12-bit ADC reaches up to 200 ksps with software-selectable reference (internal 1.5V/2.5V or external), a Sample-and-Hold window of 4 ADC clocks, and direct DMA support, making the F149 a frequent choice for sensor signal chains. Two USART channels support SPI up to 4 MHz and UART up to 115.2 kbaud with hardware flow control. The integrated brownout reset, supply voltage supervisor, and basic timer provide system-level robustness. The 'G4' suffix denotes NiPdAu lead-free finish with green (RoHS) compliance. Typical applications span smart utility metering, portable medical instrumentation, sensor hubs, industrial remote controls, and low-power wireless sensor nodes where the F149's 2 KB SRAM and 60 KB Flash comfortably host a real-time OS or state-machine firmware. The wide 1.8V-3.6V supply and ultra-low LPM3 current also suit battery-powered data loggers that wake periodically to sample, process, and transmit. When designing with this device, ensure the 64-VQFN exposed pad is soldered to a sufficient copper pour (recommended at least 1 sq inch top-layer) to keep the junction temperature within the -40C to +85C industrial range at full 8 MHz operation. The unused USART pins should be configured as outputs or terminated to avoid floating inputs that can elevate quiescent current in LPM3 retention. This page synthesizes distributor pricing, drop-in alternatives, pinout reference, and practical design notes not consolidated on any single manufacturer or distributor page, giving engineers a single-source decision brief for the MSP430F149IRTDRG4.

询价 联系我们
MSP430F149IRTDT - 8MHz 60KB Flash MCU | Texas Instruments
MSP430F149IRTDT

MSP430F149IRTDT - 8MHz 60KB Flash MCU | Texas Instruments

The Texas Instruments MSP430F149IRTDT is an ultra-low-power 16-bit mixed-signal microcontroller with an 8 MHz operating frequency, 60 KB of Flash memory, 2 KB of SRAM, a 12-bit ADC, an on-chip comparator, and SPI/UART interfaces in a 64-pin VQFNP (RTD) package. It is designed for embedded systems that require low-power operation, mixed-signal measurement, and a compact industrial package. An MCU is a programmable integrated circuit containing a processor core, memory, and peripherals. The MSP430 MCU family combines a 16-bit RISC architecture with energy-conscious operating modes. In the MSP430F149, this hierarchy supports embedded control functions spanning industrial instrumentation, battery-powered sensing, communications modules, and compact data-acquisition systems where both processing capability and power efficiency are important. The device provides 8-channel, 12-bit ADC conversion alongside a comparator for signal conditioning and threshold-based control. Its communication resources include SPI and UART, supporting connection to sensors, external converters, transceivers, and service interfaces. The verified manufacturer product information identifies the MCU as operating at 8 MHz, while the indexed technical listing specifies a 1.8 V to 3.6 V supply range and 22 I/O ports. Memory organization is a key selection criterion: the MSP430F149IRTDT combines 60 KB of Flash program memory with 2 KB of SRAM. Flash retains firmware without a separate external memory device, while SRAM supports runtime variables, stack operations, and intermediate data handling. The indexed distributor listing additionally describes the program memory as 60 KB plus 256 bytes; the functional relationship of that auxiliary area should be confirmed against the current manufacturer datasheet before firmware partitioning. Typical applications include low-power sensor nodes, industrial measurement equipment, serial data loggers, motor or process-control modules, and communication-enabled embedded products. The 12-bit ADC is useful for analog inputs, the comparator supports fast threshold events, and SPI or UART provides pathways to external sensors and service interfaces. Engineers should select passive values and external circuitry for the actual signal bandwidth and required measurement accuracy. The principal design consideration is board-space and power budgeting. The 64-pin VQFNP package supports a compact implementation, but exposed-pad layout, thermal performance, and pin multiplexing still require careful PCB planning. Firmware should use the MCU's low-power modes when appropriate, and unused peripherals should be disabled to reduce overall energy consumption. This page consolidates the verified manufacturer specifications, distributor pricing and availability, source links, application guidance, and design cautions. It also distinguishes a true pin-compatible replacement from variants that merely share the MSP430F149 device name or use a different package, helping engineers avoid incorrect substitutions.

询价 联系我们
MSP430F155IPM - 16-Bit 8MHz Mixed-Signal MCU | Texas Instruments
MSP430F155IPM

MSP430F155IPM - 16-Bit 8MHz Mixed-Signal MCU | Texas Instruments

The Texas Instruments MSP430F155IPM is a 16-bit mixed-signal microcontroller operating at 8 MHz, with 16 KB of Flash memory, 512 bytes of SRAM, and a 64-LQFP 10 x 10 mm package. Its integrated peripherals include a 12-bit ADC, dual 12-bit DAC, comparator, DMA controller, I2C, SPI, and UART interfaces. The combination of analog conversion capability, serial connectivity, and low-power operation makes this MCU suitable for compact industrial measurement, data acquisition, portable instrumentation, and embedded control systems. An MCU is a programmable integrated circuit containing a processor core, memory, and peripheral interfaces used to control a product. A mixed-signal MCU belongs to the microcontroller hierarchy and combines digital processing with analog-to-digital and digital-to-analog conversion functions. This integration allows one device to acquire sensor signals, process measurements, generate control outputs, and communicate with external equipment while reducing component count and board area. The MSP430F155IPM uses a 16-bit RISC architecture with 16-bit registers and operates from a 1.8 V to 3.6 V supply. Its 8 MHz clock provides deterministic control-loop performance, while the 12-bit ADC supports measurement resolution across common industrial and sensor signals. Two 12-bit DAC channels can generate independently controlled analog voltages for excitation, biasing, calibration, or actuator-reference applications. DMA and comparator resources further improve real-time system performance. Communication resources include I2C, SPI, and UART interfaces, allowing the device to connect sensors, displays, data loggers, and service equipment through common serial protocols. The integrated analog and digital blocks avoid external converters for many designs, although system accuracy still depends on reference quality, layout, input conditioning, and calibration. The manufacturer datasheet should be used when assigning ADC channels, DAC outputs, and mixed-signal routing functions. Typical uses include portable data loggers, industrial transducers, laboratory measurement equipment, battery-powered recorders, environmental monitoring, and embedded control panels. The 64-LQFP package exposes more I/O than smaller microcontroller packages and is practical for prototypes or products requiring multiple serial interfaces, analog inputs, and digital control signals. Its 22 I/O positions provide connectivity for sensors, switches, indicators, and communications. Power-rail design should account for the 1.8 V to 3.6 V operating range, analog reference stability, and the current required by the ADC, DAC, communications peripherals, and attached loads. Place input and output capacitors close to their associated supply pins, route analog signals away from switching nodes, and provide a clean reference network. Review the pin-description and recommended-application circuits in the manufacturer datasheet before finalizing the PCB. This product record combines the device's principal specifications, package details, mixed-signal application guidance, comparison criteria, and practical design considerations. It is intended to help engineers confirm interface requirements, identify suitable board-level companions, and evaluate footprint-compatible MSP430 family options before releasing a design.

询价 联系我们
MSP430F157IPM - 8MHz 32KB Flash Mixed-Signal MCU | Texas Instruments
MSP430F157IPM

MSP430F157IPM - 8MHz 32KB Flash Mixed-Signal MCU | Texas Instruments

The Texas Instruments MSP430F157IPM is an 8 MHz mixed-signal microcontroller with a 16-bit RISC CPU, 32 KB flash memory, 1 KB SRAM, a 12-bit ADC, dual 12-bit DACs, comparator, DMA, and I2C, SPI, and UART interfaces. The device is housed in a 64-pin LQFP (PM) package measuring 10 mm by 10 mm. A mixed-signal microcontroller combines a digital processor and analog conversion peripherals in one package. In the MSP430 product hierarchy, MSP430F157IPM is a mixed-signal MCU, placing analog measurement and signal generation alongside a low-power 16-bit processor. This integration allows a compact instrument to acquire sensor signals and produce controlled analog outputs without requiring separate converters. The principal features include an 8 MHz maximum clock, 32 KB of flash program memory, 1 KB of SRAM, a 12-bit ADC, two 12-bit DAC channels, and a comparator. A direct-memory-access controller supports efficient peripheral transfers, while I2C, SPI, and UART interfaces connect the MCU to sensors, displays, data loggers, and external converters. The MSP430 architecture also provides multiple low-power operating modes for battery-powered measurement systems. The 16-bit RISC CPU uses a reduced instruction set designed for efficient control and measurement workloads. Its 16-bit registers and word-oriented architecture are well suited to handling ADC results, timers, control loops, and communication buffers. Peripheral integration allows designers to avoid duplicating conversion circuitry while retaining a compact firmware-driven signal chain. Typical uses include portable environmental monitoring, industrial sensor acquisition, precision control, battery-powered instruments, communications equipment, and compact data-acquisition systems. The ADC supports analog measurement, the dual DACs support excitation or output control, and the serial interfaces support expansion to external sensors and digital peripherals. The 64-pin LQFP package also provides a conventional surface-mount format with a generous pin count for analog, power, and digital signals. When laying out the PCB, keep analog inputs short, maintain a clean return path around the ADC and DAC circuitry, and place bypass capacitors close to the supply pins. Confirm the exact pin assignments and exposed-power requirements against the manufacturer datasheet before routing. This page consolidates the device’s key specifications, application guidance, and drop-in replacement considerations for faster engineering review and sourcing.

询价 联系我们
MSP430F167IPM - 16-Bit 8MHz Mixed-Signal MCU | Texas Instruments
MSP430F167IPM

MSP430F167IPM - 16-Bit 8MHz Mixed-Signal MCU | Texas Instruments

The Texas Instruments MSP430F167IPM is a 16-bit mixed-signal microcontroller operating at up to 8 MHz, with 32 KB of Flash memory, 1 KB of SRAM, a 12-bit ADC, dual 12-bit DACs, and a comparator in a 64-pin LQFP package. According to the Texas Instruments MSP430F167 product page, the device also includes DMA and I2C, SPI, and UART connectivity for embedded measurement and control systems. An MSP430 mixed-signal microcontroller combines a low-power RISC processor with analog peripherals on one integrated circuit. The MSP430 family uses a 16-bit RISC architecture and is designed for battery-powered, portable, industrial, and instrumentation products where energy efficiency, deterministic control, and compact mixed-signal integration are important. In the MSP430F167IPM, the analog and digital blocks are arranged to support sensor acquisition, control-loop monitoring, signal generation, and communications within one embedded platform. The device's principal features include an 8 MHz maximum clock, 32 KB of Flash program memory, 1 KB of SRAM, a 12-bit analog-to-digital converter, and two 12-bit digital-to-analog converters. Its peripheral selection also includes a comparator, direct-memory-access support, I2C, SPI, and UART interfaces. These resources permit designers to consolidate functions that otherwise might require separate analog, communication, and processing components. The MSP430 CPU16 uses 16-bit registers and a RISC instruction set designed for efficient embedded control. The integrated peripherals support concurrent acquisition, conversion, and communication tasks, while DMA can move data without requiring each byte to be processed by the CPU. The dual DACs are useful for excitation, reference, or control-signal generation, and the ADC provides direct quantization of analog inputs without a separate converter. Typical uses include industrial sensor nodes, portable instrumentation, low-power data loggers, motor and process monitoring, and communications-enabled measurement equipment. For designs requiring multiple analog inputs, synchronized measurements, waveform generation, or low-power wake-up behavior, the combination of ADC, DAC, comparator, DMA, and serial interfaces reduces external component count and simplifies firmware design. The most important layout consideration is preserving clean analog performance in a mixed-signal board. Place the MCU, analog supply bypass capacitors, reference components, and sensitive signal traces close together, while keeping switching-converter nodes and high-current paths away from the ADC inputs. Use the pin-description and recommended application-circuit information in the Texas Instruments MSP430F167 datasheet when assigning every LQFP-64 connection. This page organizes the MSP430F167IPM's core specifications, application guidance, pin-package considerations, and same-footprint replacement options for faster engineering evaluation. It also distinguishes direct family alternatives from cross-brand substitutions so PCB changes, peripheral differences, and firmware requirements remain visible during component selection.

询价 联系我们
MSP430F168IPM - 8MHz 16-Bit MCU | Texas Instruments
MSP430F168IPM

MSP430F168IPM - 8MHz 16-Bit MCU | Texas Instruments

The Texas Instruments MSP430F168IPM is an 8 MHz mixed-signal microcontroller with 48 KB Flash, 2 KB SRAM, a 12-bit ADC, dual 12-bit DAC, comparator, DMA, I2C, SPI, and UART in a 64-LQFP 10 x 10 mm package. It combines a 16-bit RISC CPU with integrated analog conversion and low-power operation for portable measurement, industrial control, and embedded instrumentation. A mixed-signal microcontroller is an MCU that combines digital processing with analog measurement or signal-generation functions. In the product hierarchy, the MSP430F168IPM is a 16-bit RISC microcontroller, a mixed-signal MCU, a semiconductor, and an embedded processing component. Its integrated ADC and DAC reduce the need for external conversion devices when a system must measure analog inputs and generate controlled analog outputs. Key features include an 8 MHz maximum clock, 48 KB of Flash program memory, 2 KB of SRAM, and a 125 ns instruction cycle time. The device also provides a 12-bit ADC, two 12-bit DAC channels, a comparator, DMA, and serial interfaces supporting I2C, SPI, and UART. These resources support efficient firmware execution, peripheral data movement, and compact mixed-signal designs without a separate analog front end. The MSP430 CPU uses 16-bit registers and a 16-bit RISC architecture. Its FLL+ frequency-locked-loop support, five low-power modes, and standby wake-up behavior below 6 microseconds make it suitable for systems that spend substantial time waiting for measurements while retaining fast response to new activity. The verified manufacturer product information identifies the family as optimized for extended battery life in portable measurement equipment. Typical applications include portable environmental monitoring, industrial process instrumentation, battery-powered sensor nodes, data loggers, and embedded control systems. A designer can use the ADC for sensor acquisition, DMA for moving conversion data without excessive CPU intervention, and the DAC for excitation or output control. I2C and SPI support digital sensors and external converters, while UART simplifies connection to host systems or service interfaces. The primary design consideration is firmware and resource planning. The MSP430F168IPM has 2 KB of SRAM, so sampled data should be processed and transferred efficiently rather than stored indefinitely. Decoupling, analog-ground layout, and ADC/DAC reference design must follow the manufacturer datasheet, while the 64-LQFP footprint requires careful escape routing and thermal-aware copper placement. This product record combines verified manufacturer and distributor specifications with practical mixed-signal design guidance, drop-in candidate analysis, a parameter comparison table, and application-focused selection advice. These engineering resources help buyers evaluate the MCU beyond basic catalog fields before requesting price, stock, or long-term supply information.

询价 联系我们
MSP430F169IPM - 16-Bit 8MHz Mixed-Signal MCU | Texas Instruments
MSP430F169IPM

MSP430F169IPM - 16-Bit 8MHz Mixed-Signal MCU | Texas Instruments

The Texas Instruments MSP430F169IPM is an ultralow-power 16-bit mixed-signal microcontroller operating at 8 MHz, with 60 KB of Flash memory, 2 KB of SRAM, a 12-bit ADC, dual 12-bit DACs, and communication peripherals including I2C, SPI, and UART. It is packaged in a 64-pin LQFP measuring 10 mm by 10 mm. The MSP430F169 combines a 16-bit RISC CPU, 16-bit registers, five low-power modes, and extensive analog peripherals for portable measurement and embedded-control systems. A mixed-signal microcontroller integrates digital processing and analog functions in one device. In the MSP430 family, the MCU combines a low-power RISC core with timers, serial interfaces, direct-memory access, and on-chip analog conversion resources. This integration allows portable instruments to sample inputs, process measurements, control outputs, and communicate with external equipment while reducing component count and board space. Key features include an 8 MHz maximum clock frequency, 60 KB of Flash program memory, 2 KB of SRAM, a 12-bit ADC, two 12-bit DAC channels, and a comparator. The device also provides DMA, I2C, SPI, and UART interfaces. Its five low-power modes are intended to extend operating time in battery-powered applications, while the 16-bit architecture supports efficient handling of control and measurement tasks. The MSP430F169IPM is designed for embedded systems that need low power, analog measurement, and serial connectivity without requiring a larger external analog subsystem. The integrated ADC and DAC can be used for sensor acquisition, signal conditioning, reference generation, and output control. DMA can move data between peripherals and memory, helping reduce processor involvement in repetitive transfers. Typical applications include portable measurement instruments, battery-powered data loggers, industrial sensors, medical monitoring equipment, and compact control systems. For designs requiring several analog inputs and outputs, the dual DAC and 12-bit ADC provide useful resources. UART, I2C, and SPI interfaces allow connection to sensors, displays, memory, transceivers, and host processors. A key design consideration is firmware and power-mode planning. Engineers should select appropriate low-power modes, preserve required state between sleep intervals, and configure unused pins and peripherals to avoid unnecessary current draw. The 64-pin LQFP package also requires careful PCB layout and thermal management when the device operates continuously at higher clock frequencies. Verify the complete pinout, electrical limits, and peripheral configuration against the manufacturer datasheet before production release. This page combines manufacturer specifications, distributor availability, package details, and application-focused design guidance for engineers evaluating the MSP430F169IPM.

询价 联系我们
MSP430F2001IN - 16MHz MCU, 1KB Flash | Texas Instruments
MSP430F2001IN

MSP430F2001IN - 16MHz MCU, 1KB Flash | Texas Instruments

The Texas Instruments MSP430F2001IN is a 16-bit mixed-signal microcontroller with a 16 MHz maximum clock, 1 KB Flash memory, 128 B SRAM, timer resources, and a comparator, packaged in a 14-pin PDIP (N) package. Its combination of compact code and data memory, low-power operating modes, and integrated mixed-signal resources makes it suitable for small embedded control, sensing, and measurement designs. A microcontroller is a programmable integrated circuit containing a processor core, nonvolatile program memory, working RAM, and peripherals. The MSP430F2001 belongs to the MSP430 MCU family, whose RISC architecture is designed for low-power embedded control. Within the hierarchy of embedded semiconductors, the MSP430F2001IN is a microcontroller, mixed-signal processor, embedded processor, and system-on-chip device with timer and comparator functions. The most prominent specifications visible in the verified product information are its 16 MHz operating frequency, 1 KB Flash, 128 B SRAM, and 14-pin PDIP package. Its 16-bit RISC architecture supports efficient execution of compact control routines, while the on-chip timer supports periodic event generation and timing tasks. The integrated comparator allows threshold-based input decisions without requiring a separate comparator IC. Five power-saving modes, standby wake-up in less than 6 microseconds, and a 125 ns instruction-cycle time were also identified in the retrieved technical material. The limited 1 KB Flash and 128 B SRAM distinguish this device from larger MSP430 products. Firmware must therefore be compact, while RAM variables and interrupt-service routines require careful memory budgeting. This constraint is not a drawback for simple sensing and control nodes, but it makes the MSP430F2001IN less suitable for protocol-heavy gateways, graphical interfaces, large protocol stacks, or applications requiring extensive data buffering. Typical uses include battery-operated sensors, simple industrial measurement nodes, compact control panels, timer-based equipment, and low-power embedded systems. Designers can place the MCU between physical inputs and an actuator or communications interface, using the comparator for threshold detection and the timer for periodic measurement or control. Its small memory footprint can simplify firmware verification and make behavior easier to analyze than in a larger embedded platform. The principal design consideration is to confirm the complete operating voltage range, current consumption, peripheral assignment, and exact pin mapping in the manufacturer datasheet before layout or firmware release. The verified material confirms the 14-pin PDIP package but does not provide a complete pin table, so pin assignments should not be inferred from the package count. This page consolidates verified product facts, sourcing information, drop-in candidates, and practical selection guidance beyond a distributor listing. For new production designs, engineers should also evaluate MSP430 devices with more Flash or SRAM when future firmware growth is likely. For cost-sensitive, low-complexity products that fit within 1 KB Flash and 128 B SRAM, the MSP430F2001IN remains a compact mixed-signal MCU option with a documented 16 MHz clock and integrated timer and comparator resources.

询价 联系我们
MSP430F2001TN - 16MHz Ultra-Low-Power MCU | Texas Instruments
MSP430F2001TN

MSP430F2001TN - 16MHz Ultra-Low-Power MCU | Texas Instruments

The Texas Instruments MSP430F2001TN is an ultra-low-power mixed-signal microcontroller with a 16-bit RISC CPU, 16 MHz maximum clock rate, 1 KB of flash memory, and 128 B of SRAM in a 14-pin PDIP package. It combines a 16-bit timer, ten I/O pins, and an analog comparator, making it suitable for compact embedded control and sensor-oriented designs. A mixed-signal microcontroller is an embedded semiconductor that combines digital processing with analog functions. The MSP430 architecture belongs to the broader hierarchy of microcontrollers, embedded processors, and semiconductors. Its 16-bit RISC core uses a 125 ns instruction cycle, while the digitally controlled oscillator and FLL+ support flexible clock generation for energy-efficient operation. Low power is a defining feature of the MSP430F2001 family. Its supply-voltage range is 1.8 V to 3.6 V, active-mode current is 220 µA at 1 MHz and 2.2 V, standby current is 0.5 µA, and off-mode current with RAM retention is 0.1 µA. Five power-saving modes help reduce energy consumption when the application does not require continuous processing. The device provides a 16 MHz clock capability, a built-in 16-bit timer, ten I/O pins, and a versatile analog comparator. The comparator can support threshold detection and basic signal conditioning, while the timer supports periodic timing, counting, and event generation. The digitally controlled oscillator permits wake-up from low-power modes to active mode in less than 1 µs. Typical uses include battery-powered sensor nodes, compact industrial monitors, low-energy measurement instruments, appliance control modules, and embedded systems that periodically sample a sensor and return to a low-power state. Its small package and low active current are particularly useful where board space and average energy use are more important than maximum processing throughput. When designing around the MSP430F2001TN, account for the limited 1 KB flash and 128 B SRAM when sizing code, buffers, and state variables. Keep interrupt routines short, use a low-power operating mode during idle intervals, and verify comparator and timer behavior across the intended supply-voltage range. The manufacturer pin-description table should be used when assigning PCB signals and programming test points. This page combines the exact manufacturer and distributor product information with application guidance, power-mode considerations, and design notes that help engineers evaluate the MSP430F2001TN beyond a basic parameter list.

询价 联系我们
MSP430F2002IN - 16MHz 1KB Flash MCU | Texas Instruments
MSP430F2002IN

MSP430F2002IN - 16MHz 1KB Flash MCU | Texas Instruments

The Texas Instruments MSP430F2002IN is a 16-bit mixed-signal microcontroller rated at 16 MHz, with 1 KB of Flash memory, 128 bytes of SRAM, 10-bit SAR ADC, SPI/I2C USI, comparator, timer, and 10 I/O ports in a 14-pin PDIP package. According to the Texas Instruments product data, the device operates from 1.8 V to 3.6 V and is intended for industrial-temperature applications from -40°C to +85°C. A mixed-signal microcontroller combines a digital processing core with analog conversion and comparison functions. The MSP430F2002 belongs to the MSP430F2xx family of ultra-low-power 16-bit RISC microcontrollers, a branch of embedded processors and mixed-signal ICs. Its 125 ns instruction cycle provides a 16 MHz operating rate, while its small memory footprint targets compact control, sensing, and measurement systems rather than resource-intensive applications. Key device features include 1 KB of Flash program memory, 128 bytes of SRAM, a 10-bit successive-approximation ADC, a USI supporting SPI or I2C, an internal comparator, and timer resources. The 10 available I/O ports support integration with sensors, actuators, indicators, and external peripherals. The manufacturer data also identifies low supply-voltage operation, multiple low-power operating modes, and a wake-up time below 6 µs as important characteristics of the device family. The MSP430 architecture uses a 16-bit RISC core and a mixed-signal feature set suited to low-power embedded control. The ADC permits direct measurement of analog inputs, while the USI provides a compact interface to serial sensors and external controllers. Because SRAM is limited to 128 bytes, firmware must use the Flash program area efficiently and should avoid buffering large data sets in RAM. Typical uses include battery-powered environmental sensors, compact industrial monitoring nodes, digital thermometers, simple energy meters, low-cost control boards, and embedded instruments that require analog measurement, serial communication, and low standby consumption. The device can also support low-power wake-and-measure products where the ADC result determines whether communication should begin. Designers should verify the exact peripheral pin assignments and alternate-function limitations against the manufacturer datasheet before finalizing the PCB. The 14-pin PDIP package simplifies breadboard and through-hole prototypes, but its comparatively large footprint is less suitable for compact production products. Firmware should use conservative RAM budgets, retain only essential state between sleep intervals, and tolerate peripheral differences among MSP430F2xx family members.

询价 联系我们
MSP430F2002TN - 16MHz Mixed-Signal MCU | Texas Instruments
MSP430F2002TN

MSP430F2002TN - 16MHz Mixed-Signal MCU | Texas Instruments

The Texas Instruments MSP430F2002TN is a 16 MHz mixed-signal microcontroller with 1 KB of Flash memory, 128 bytes of SRAM, SPI and I2C serial interfaces, a comparator, and timer resources in a 14-pin PDIP package. It is designed for compact embedded systems that need deterministic control, serial connectivity, and low power consumption within a small package footprint. A mixed-signal microcontroller is an embedded semiconductor that combines a digital microcontroller core with analog and timing peripherals. The MSP430 belongs to the MCU hierarchy of general-purpose embedded processors, where a 16-bit RISC core executes firmware while integrated converters, comparators, timers, and communication interfaces reduce the number of separate discrete components needed on a board. The device operates at up to 16 MHz and provides a 125 ns instruction cycle time. Its memory configuration includes 1 KB of Flash, described by distributor listings as 1K x 8 plus 256 bytes, together with 128 bytes of SRAM. The available peripherals include SPI, I2C, a comparator, and timer functions, allowing the MCU to interface with sensors, converters, displays, and other embedded-system peripherals. The MSP430F2002 supports a low supply-voltage range extending to 3.6 V, while distributor specifications also identify a 1.8 V to 3.6 V supply range. Its low-power design includes five power-saving modes, an off-mode RAM-retention current of 0.1 µA, and standby wake-up in less than 6 µs. These characteristics are relevant when the target equipment spends substantial time idle or operates from a constrained energy source. Typical uses include compact sensor nodes, industrial measurement modules, low-power instrumentation, simple motor or actuator controllers, and battery-operated embedded products. The 14-pin PDIP package also facilitates prototyping and through-hole assembly, while the SPI and I2C interfaces provide practical paths for connecting external sensors, memory, communication modules, and actuators. Designers should account for only 1 KB of Flash and 128 bytes of SRAM when sizing firmware and working memory. The small memory footprint favors compact control loops, boot code, and tightly bounded application logic rather than graphical interfaces or large protocol stacks. Supply voltage, timer requirements, and the availability of both SPI and I2C should be confirmed against the application before PCB design. This product record consolidates the verified manufacturer and distributor information into an engineer-oriented reference covering the 16 MHz performance, memory, mixed-signal peripherals, power characteristics, package constraints, sourcing considerations, and design trade-offs associated with the MSP430F2002TN.

询价 联系我们
MSP430F2003IN - 16MHz Sensing MCU with 16-Bit ADC | Texas Instruments
MSP430F2003IN

MSP430F2003IN - 16MHz Sensing MCU with 16-Bit ADC | Texas Instruments

The Texas Instruments MSP430F2003IN is a 16-MHz mixed-signal microcontroller with one 16-bit sigma-delta ADC, a Universal Serial Interface for SPI or I2C, 1 KB of Flash memory, 128 B of RAM, and a 14-pin PDIP package. It combines an MSP430 CPU16 core with energy-conscious sensing peripherals in a through-hole package suitable for prototyping and compact embedded control assemblies. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working memory, and peripherals on one die. The MSP430 belongs to the mixed-signal MCU hierarchy, combining digital control with analog measurement. Its 16-bit sigma-delta ADC supports acquisition of slowly changing or low-bandwidth sensor signals, while the USI provides a compact interface for external sensors, converters, and communication peripherals. The principal device characteristics are a 16-MHz operating frequency, one 16-bit sigma-delta ADC, 1 KB of Flash, 128 B of RAM, and USI support for SPI or I2C. The PDIP (N) package provides 14 accessible pins and eases hand soldering, automated through-hole insertion, and educational prototyping. The manufacturer product page describes the MSP430F2003 family as a 16-MHz sensing MCU intended for compact, low-power embedded systems. Technically, the MSP430F2003IN integrates a 16-bit RISC-like CPU16 processor with mixed-signal sensing resources. Its limited 1 KB Flash and 128 B RAM favor compact control programs rather than large application frameworks. Software must account for the small memory footprint, while the ADC and USI expand the available measurement and external-device connectivity without requiring separate interface ICs. Typical uses include battery-powered environmental monitoring, industrial sensor nodes, portable measurement instruments, and low-power control boards. The USI can connect an SPI or I2C sensor, while the 16-bit sigma-delta ADC is appropriate for precision-oriented analog acquisition. Firmware must preserve accurate timing and use the available RAM efficiently when buffering samples or maintaining application state. Designers should confirm ADC input range, channel availability, and the required external support circuitry against the manufacturer datasheet before finalizing analog front ends. The DIP outline also requires adequate board spacing and through-hole clearance. Although the part is simple to prototype, production designs should consider its small memory resources and package availability before committing to a new layout. This page consolidates verified manufacturer and distributor information, package details, pricing, comparison parameters, and practical design guidance. It is intended to accelerate component selection while clearly identifying which engineering details remain tied to the official MSP430F20x1, MSP430F20x2, and MSP430F20x3 datasheet.

询价 联系我们
MSP430F2003TN - 16MHz 16-Bit Sensing MCU | Texas Instruments
MSP430F2003TN

MSP430F2003TN - 16MHz 16-Bit Sensing MCU | Texas Instruments

Texas Instruments MSP430F2003TN is a 16 MHz, 16-bit ultra-low-power mixed-signal microcontroller with a 16-bit sigma-delta ADC, USI communication interface, 1 KB Flash memory, and 128 bytes of RAM in a 14-pin DIP package. The MSP430F2003 combines a 16-bit RISC CPU, ten I/O pins, and low-power operating modes for compact portable measurement systems. A mixed-signal microcontroller is an embedded processing device that combines a digital CPU and digital peripherals with analog measurement functions. The MSP430F2003 belongs to the hierarchy of mixed-signal MCU > microcontroller > embedded processor > semiconductor. Its sigma-delta ADC is designed for low-speed or high-resolution measurement, while the Universal Serial Interface supports synchronous SPI or I2C communication with external sensors, converters, and memory devices. The principal features of this device are its 16 MHz maximum clock rate, 16-bit CPU architecture, 16-bit sigma-delta ADC, USI peripheral, 1 KB Flash memory, 128 bytes of RAM, and ten I/O pins. According to the Texas Instruments MSP430F2003 product information and manufacturer datasheet, the device is intended for portable measurement applications where low power, compact packaging, and integrated analog acquisition are more important than large program memory or high peripheral bandwidth. The MSP430 architecture uses 16-bit registers and a RISC instruction set to provide deterministic control for embedded sensing. The USI can operate with SPI or I2C protocols, allowing the MSP430F2003TN to communicate with external sensors without requiring a separate serial transceiver. Five low-power modes are identified in the manufacturer product information, helping software reduce current consumption when the acquisition and communication functions are not continuously active. Typical applications include portable environmental monitors, low-cost industrial sensing nodes, battery-powered data loggers, connected measurement instruments, and compact control products that need an ADC plus a serial sensor interface. The 1 KB Flash and 128 bytes of RAM make the device most appropriate for focused embedded tasks rather than complex user interfaces, extensive data storage, or high-throughput signal processing. The principal design consideration is memory planning. Firmware, calibration values, configuration data, stack requirements, and communication buffers must fit within the available 1 KB Flash and 128 bytes of RAM. Designers should also follow the electrical limits, oscillator requirements, clock configuration, and decoupling recommendations in the manufacturer datasheet rather than assuming that a functionally similar MCU can replace it without review. This product page consolidates the verified 16 MHz, 16-bit ADC, USI, Flash, RAM, package, pricing, and sourcing information while adding application guidance, selection criteria, and design notes. It also distinguishes direct device attributes from parameters that still require confirmation from the full Texas Instruments datasheet, avoiding unsupported assumptions about electrical ratings or lifecycle conditions.

询价 联系我们
MSP430F2011IN - 16MHz 16-Bit Ultra-Low-Power MCU | Texas Instruments
MSP430F2011IN

MSP430F2011IN - 16MHz 16-Bit Ultra-Low-Power MCU | Texas Instruments

Texas Instruments MSP430F2011IN is a 16-bit ultra-low-power mixed-signal microcontroller with a 16 MHz maximum clock, 2 KB of Flash memory, and 128 bytes of SRAM in a 14-PDIP package. Its operating supply-voltage range is 1.8 V to 3.6 V, while its key power figures include 220 µA active current at 1 MHz and 2.2 V, 0.5 µA standby current, and 0.1 µA off-mode current with RAM retention. A microcontroller is a programmable system-on-chip containing a processor core, nonvolatile program memory, working memory, and peripherals that acquire or control external signals. The MSP430 family follows the hierarchy MCU → embedded microcontroller → mixed-signal microcontroller → semiconductor. Its 16-bit RISC architecture uses 16-bit registers and a constant-memory instruction set optimized for compact control firmware. Five low-power modes and fast standby wake-up make this device especially appropriate for portable, battery-powered measurement systems. The MSP430F2011IN provides integrated timing and analog-comparison resources, including timer functions and a comparator, while its scan interface supports background capture of selected internal signals. The FLL+ frequency-locked loop and maximum 16 MHz operating frequency provide useful processing headroom for sensor acquisition, timing, state-machine control, and low-rate communication. Five power-saving modes allow firmware to reduce energy consumption when continuous CPU execution is unnecessary. The device supports an ultra-low supply-voltage range of 1.8 V to 3.6 V. Its 16-bit RISC core executes instructions with a stated 125 ns instruction-cycle time at the maximum clock frequency. Active-mode current is specified as 220 µA at 1 MHz and 2.2 V, demonstrating that performance can be scaled by clock and operating-state requirements rather than operating continuously at the maximum frequency. Typical uses include portable multimeters, environmental sensors, industrial measurement instruments, battery-powered data loggers, and compact embedded control products. The combination of 2 KB Flash, 128 bytes of SRAM, integrated comparator functions, and standby current of 0.5 µA suits designs that periodically wake, measure, process, and return to a low-power state. Designers should verify startup behavior, pin multiplexing, and application-specific peripheral assignments against the manufacturer datasheet before final PCB release. Because the IN orderable uses a 14-pin through-hole package, breadboarding and hand assembly are straightforward, but its larger footprint is less compact than an equivalent surface-mount implementation. This page combines verified manufacturer and distributor information, practical power-management guidance, package constraints, and same-family replacement context. It also separates published facts from data that still requires device-specific verification, helping engineers plan a qualified MSP430F2011IN design without relying on unverified equivalent parts.

询价 联系我们