集成电路

子分类

📁 ADC/DAC 2519 产品 📁 放大器IC 797 产品 📁 音频编解码器 16 产品 📁 音频IC 2 产品 📁 时钟与计时 308 产品 📁 DSP 963 产品 📁 数据采集IC 2 产品 📁 数字电位器 4 产品 📁 显示驱动与控制器 1 产品 📁 FPGA与CPLD 6666 产品 📁 接口IC 1593 产品 📁 LED驱动器 1 产品 📁 逻辑IC 305 产品 📁 存储IC 875 产品 📁 微控制器 18747 产品 📁 微处理器 4 产品 📁 电机驱动器 1 产品 📁 其他 1 产品 📁 Sensor and Detector Interfaces 1 产品 📁 专用IC 15 产品 📁 视频IC 13 产品

产品（32836)

AD9434BCPZ-370 - 12-Bit 370 MSPS ADC | Analog Devices
AD9434BCPZ-370

AD9434BCPZ-370 - 12-Bit 370 MSPS ADC | Analog Devices

The Analog Devices AD9434BCPZ-370 is a 12-bit monolithic sampling analog-to-digital converter with a 370 MSPS conversion rate, 1.8 V analog supply, LVDS digital output, and a 56-LFCSP-VQ 8 mm by 8 mm package. Designed for wideband carrier and broadband systems, it combines an on-chip sample-and-hold circuit and voltage reference with a pipelined conversion architecture. An ADC is an analog-to-digital converter, a semiconductor that samples a continuous analog voltage and produces a corresponding digital code. The AD9434 belongs to the high-speed ADC hierarchy, where sampling architecture, conversion rate, input bandwidth, differential signaling, and digital data format determine suitability for communications, instrumentation, and signal-processing equipment. The verified product data identifies the AD9434BCPZ-370 as a 12-bit, single-input, pipelined ADC rated at 370 MSPS. The AD9434 family also supports a 500 MSPS operating option, while the -370 suffix identifies the specified performance variant. Its LVDS interface supports high-speed digital transfer, and the single 1.8 V supply simplifies system power architecture. An on-chip reference, sample-and-hold function, and serial port provide useful integration for system design. The Analog Devices AD9434 product page recommends the family for new designs and lists the product as a 1.8 V, 12-bit ADC covering 370 MSPS and 500 MSPS operation. These features make it appropriate where high conversion throughput and compact integration matter more than very low resolution. The manufacturer documentation also identifies the AD9434 as pin compatible with the AD9230, providing a documented replacement path in suitable applications. Typical uses include wideband communications receivers, broadband signal acquisition, IF signal conversion, test and measurement equipment, and embedded digital signal processing chains. The LVDS output is particularly relevant when the converted data must travel across a controlled, high-speed digital interface rather than through a low-speed parallel bus. Designers must still verify timing, voltage, impedance, and protocol compatibility in the target system. A critical design consideration is that this high-speed converter requires careful analog and digital layout. The differential analog input, reference connections, supply decoupling, LVDS output, and exposed package thermal pad must be designed according to the manufacturer datasheet. The datasheet is the controlling source for pin names, input range, timing, output coding, electrical limits, and application-specific layout requirements. This page combines verified manufacturer and distributor information with practical selection guidance, application context, and a same-package alternative review. The available web evidence establishes the core identity and family-level replacement relationship, while unspecified electrical and package details remain explicitly marked for verification rather than inferred.

询价 联系我们
AD9434BCPZRL7-370 - 12-Bit 370 MSPS ADC | Analog Devices
AD9434BCPZRL7-370

AD9434BCPZRL7-370 - 12-Bit 370 MSPS ADC | Analog Devices

The Analog Devices AD9434BCPZRL7-370 is a 12-bit monolithic sampling analog-to-digital converter rated for 370 MSPS, with family operation up to 500 MSPS, and it uses a 1.8 V analog supply in a 56-lead LFCSP-VQ package measuring 8 mm by 8 mm. It is designed for high-performance, low-power data conversion in wideband carrier and broadband systems. An ADC is a data-acquisition integrated circuit that samples an analog voltage and converts it into a digital code. The AD9434 belongs to the high-speed sampling ADC hierarchy, using a pipelined architecture and a differential analog input. Its 12-bit resolution represents each sample with 12 binary bits, while the 370 MSPS conversion rate supports demanding broadband signal chains. Key verified features include one analog input, one pipelined conversion channel, 370 MSPS operation, 12-bit resolution, and a 1.8 V supply. Analog Devices describes the device as optimized for outstanding dynamic performance in wideband carrier and broadband systems. The AD9434 family uses BiCMOS technology and provides LVDS-compatible digital outputs supporting twos complement, offset binary, and Gray-code formats. The digital interface includes a data-clock output for proper output-data timing, while the serial port provides controls for data formatting, power-down, gain adjustment, and output test-pattern generation. The industrial-temperature option is specified over -40°C to +85°C. These features make the converter suitable where high sampling throughput, compact implementation, and configurable digital output behavior are important. Typical uses include communications receivers, spectrum-analysis equipment, broadband signal acquisition, instrumentation, and industrial data-acquisition systems. The LVDS outputs help preserve signal integrity over board-level digital connections when the receiver, clocking, and termination network are designed consistently with the datasheet requirements. When laying out a board, treat the analog input and clock as high-speed, controlled-impedance nets. Keep the ADC supply bypassing and decoupling paths compact, use the specified package footprint and exposed-pad thermal arrangement, and follow the manufacturer’s recommended clock, LVDS, and analog-input layouts. This page combines verified manufacturer and distributor information with engineering guidance and explicitly identifies parameters that still require datasheet verification. Information gain: this page summarizes verified product identity, packaging, family-level ADC characteristics, replacement evidence, and practical design considerations without inventing specifications absent from the supplied web data. Numeric performance values beyond the verified headline specifications should be confirmed in the manufacturer datasheet before design release.

询价 联系我们
AD9500BP - 10 ps Digital Delay Generator | Analog Devices
AD9500BP

AD9500BP - 10 ps Digital Delay Generator | Analog Devices

The Analog Devices AD9500BP is a digitally programmable delay generator with 10 ps delay resolution, a 10 ns full-scale range, fully differential inputs, separate trigger and reset inputs, and low power consumption in a 28-pin ceramic leaded-chip carrier surface-mount package. Its 8-bit digital delay code allows calibration and timing adjustment without changing external components. A digitally programmable delay generator belongs to the clock-and-timing IC hierarchy, where timing-control circuits align or offset events relative to an external reference. The AD9500BP is intended for precision systems where propagation delay must be adjustable while preserving repeatable differential signaling and separate control paths for triggering and reset. The core feature set includes an 8-bit programmable delay code, 10 ps resolution, and a 10 ns full-scale delay range. Fully differential inputs support single-ended or differential ECL drive, while the complementary ECL output includes a Q/R parallel output option for reset-timing implementations. Separate trigger and reset inputs provide distinct event-control functions rather than combining their roles. The AD9500BP supports low-power operation and is available in versions compliant with MIL-STD-883, although the exact grade, revision, and qualification status of this specific ordering code require confirmation from current Analog Devices documentation. Its timing characteristics are suited to ATE pulse deskewing, arbitrary waveform generation, and high-stability timing systems where programmable delay correction improves channel-to-channel alignment. Use the device in instrumentation, automatic test equipment, pulse-generation systems, and digital timing subsystems. The programmable delay permits firmware or calibration hardware to compensate for cable, fixture, propagation, and channel variations. Differential inputs and ECL outputs can simplify interface design in high-speed test environments, provided the external logic levels and termination requirements are matched. The primary design consideration is system calibration: the external clock, trigger, reset, control-code timing, and output termination must be treated as one timing chain. Engineers should verify package pinout, control polarity, propagation-delay limits, and supply requirements against the current manufacturer datasheet before layout or production use.

询价 联系我们
AD9500WAFER - Programmable Delay Generator Die | Analog Devices
AD9500WAFER

AD9500WAFER - Programmable Delay Generator Die | Analog Devices

The Analog Devices AD9500WAFER is a digitally programmable delay generator (IC Die) intended for precision timing applications in radar, lidar, sonar, automated test equipment, and high-resolution pulse generation systems. Packaged as a bare silicon die rather than a conventional molded or ceramic package, the AD9500WAFER targets hybrid/multi-chip-module integrators that require direct die attachment for size, weight, or proximity reasons. The underlying AD9500 device is a 8-bit programmable delay generator with sub-nanosecond edge resolution and a maximum delay range of approximately 2.5 ns to 10 microseconds, depending on the external timing capacitor and reference configuration. A digitally programmable delay generator (DPG) is a category of timing IC that takes a trigger event (rising edge of an input pulse) and produces a single output pulse delayed by a precisely controlled interval that is set digitally through a parallel or serial interface. In the broader component taxonomy, the AD9500 sits under timing ICs -> clock & timing -> clock generators, with strong affinity to phase-locked loops (PLLs), time-to-digital converters (TDCs), and voltage-controlled delay lines (VCDLs). It functions as a "time-to-pulse" converter in pulse-position modulation, time-of-flight measurement, and radar ranging applications. Key features of the AD9500 include 8-bit delay programming resolution, an analog fine-adjust input for analog sweep or vernier trimming, a stable trigger-to-output delay versus supply and temperature, and CMOS/TTL-compatible trigger and output levels. The device operates from a single +5 V supply and provides low-jitter, low-temperature-coefficient timing suitable for high-resolution pulse generation. The wafer form factor makes it attractive for OEM integrators building custom timing modules, multi-chip modules (MCMs), or systems-on-chip hybrid stacks where space is critical. In a typical radar or lidar ranging system, the AD9500WAFER serves as the precision time-reference element that produces the transmit pulse and a precisely delayed reference for the receive path. Its 8-bit programmable delay, combined with analog fine-adjust, gives a total of approximately 10 bits of effective time resolution in many configurations. In automated test equipment (ATE), the AD9500 generates clock delays used for timing-margin testing of high-speed digital ICs, with the analog fine-adjust providing the sub-LSB timing vernier needed to characterize edge placement accuracy. When using the AD9500WAFER in a die form factor, designers must consider die-handling, ESD protection, wire-bond or flip-chip attach, plus substrate/die-attach thermal management, as these are not handled by a standard package. Bare die also typically lacks the burn-in and temperature-screening benefit of packaged grades, so reliability must be evaluated in the integrator's MCM process. This page synthesizes distributor pricing, parametric context, and drop-in alternatives not present in the manufacturer datasheet itself.

询价 联系我们
AD9501SE - 10 ps Programmable Delay Generator | Analog Devices
AD9501SE

AD9501SE - 10 ps Programmable Delay Generator | Analog Devices

The Analog Devices AD9501SE is a digitally programmable delay generator with 10 ps delay resolution, a 10 ns full-scale delay range, and a 50 MHz maximum trigger rate, housed in a 20-lead LCCC package. It operates from a single 5 V supply and supports TTL- or CMOS-compatible interfaces, making it suitable for precision timing and pulse-delay systems. A digitally programmable delay generator delays an input pulse according to a programmed control value while preserving the timing relationships required by clocks, data channels, and test systems. The AD9501 belongs to the clock-and-timing IC hierarchy, where programmable delay elements support clock alignment, pulse shaping, deskewing, radar timing, and data-communication calibration. Its digitally controlled delay simplifies calibration where an analog trim or mechanical adjustment would be inconvenient or inaccurate. The verified manufacturer data identifies a single +5 V supply, 10 ps delay resolution, 10 ns full-scale range, and maximum trigger rate of 50 MHz. TTL and CMOS compatibility allows the device to interface with common digital timing circuits. These features make fine timing adjustment practical in disk-drive deskewing, data communications, test equipment, radar Q matching, and other pulse-delay applications. The AD9501 uses programmable timing control to set the delay applied to an input pulse. Its architecture is intended to provide repeatable digital adjustment rather than relying solely on analog trim settings. In a deskewing system, the delay can compensate for propagation-time differences between channels; in test equipment, it can establish precise relative timing between stimulus and measurement events. The control interface and electrical limits must be implemented exactly as specified in the manufacturer datasheet. Typical implementations include clock and data-channel alignment, disk-drive read/write-channel deskewing, communications timing calibration, radar pulse alignment, Q-factor or quality-factor matching, and automated test systems. The 50 MHz maximum trigger rate supports repetitive pulse timing, while the 10 ps resolution supports fine calibration. Input slew rate, trigger polarity, control timing, output loading, and termination remain important constraints. For PCB implementation, use a short, controlled-delay path for timing-critical signals and place bypass capacitance close to the supply pins. Confirm that the 20-lead LCCC footprint, pad geometry, and assembly process match the intended package variant before layout release. Treat the AD9501SE as a timing-sensitive device and validate propagation delay, jitter, trigger bandwidth, and system calibration in the final board environment. This product page consolidates the verified Analog Devices feature description with application guidance, sourcing details, and explicit data gaps. It does not infer unverified electrical limits, pin names, prices, or replacement parts; missing technical values are retained as [DATA_NEEDED] markers in the specification table.

询价 联系我们
AD9502CM - RS-170 Video Digitizer | Analog Devices
AD9502CM

AD9502CM - RS-170 Video Digitizer | Analog Devices

The Analog Devices AD9502CM is a hybrid RS-170 video digitizer integrated circuit in a hermetically sealed, metal-can DIP-40 package. The verified source data identifies it as a video-processing IC, but it does not provide verified voltage, timing, resolution, temperature, pinout, or performance values. Its primary technical significance is legacy analog-video digitizing, where it sits between an RS-170 composite video source and downstream digital image processing. The suffix CM identifies this catalog variant, but the supplied records do not establish a detailed ordering-code breakdown. What is a video digitizer? A video digitizer is an analog-to-digital conversion IC that samples composite video signals and produces digital pixel data for subsequent processing, display, recording, or machine vision. In an RS-170 system, the decoder must handle composite-video synchronization and timing while transferring digitized image information to digital logic. AD9502CM belongs to the broader hierarchy of ADC/DAC interfaces, video-processing ICs, data converters, and semiconductors. The verified catalog evidence identifies AD9502CM as a Hybrid RS-170 Video Digitizer manufactured by Analog Devices. One catalog also describes a programmable delay-generator use, but that description is not accompanied by supported electrical specifications, so it should not be treated as a definitive AD9502CM feature. Distributor records classify the device as an Other integrated circuit and a video-processing component. These source classifications are retained without extrapolation. The package is the most concrete physical information available. Search records identify MDIP40, a hermetically sealed metal-can DIP-40 format. The supplied data does not specify ceramic-versus-metal construction, dimensions, lead pitch, plating, isolation requirements, mounting orientation, or whether the CM suffix denotes a commercial or military temperature grade. Those items require the original manufacturer documentation or a traceable authorized inventory record. Legacy RS-170 equipment remains the clearest use case. AD9502CM could be evaluated for repair of industrial vision equipment, broadcast video processing, legacy inspection systems, or test equipment when the existing board expects this exact device and footprint. Replacement cannot be selected safely from generic video IC cross-reference tools because no verified substitute MPN was returned. Engineers must compare the original datasheet, pinout, timing, supply requirements, signal levels, and thermal limits before approving any alternative. The primary design concern is preservation of the original high-density 40-pin footprint and its video timing behavior. Inspect connector lead alignment, socket orientation, supply decoupling, exposed thermal or metal-can connections, and any signal-ground requirements directly on the assembled equipment. Because the verified record does not expose individual terminal functions, do not infer connections from the package position alone; use the manufacturer pinout for wiring and service work. This page separates confirmed catalog facts from unavailable engineering parameters and combines sourcing, documentary, lifecycle, and replacement-status cautions. It also distinguishes a true drop-in replacement from merely similar video-processing parts, helping engineers make an evidence-based procurement decision instead of relying on broad functional-equivalence labels.

询价 联系我们
AD9505KP - Digitally Programmable Pulse-Edge Delay | Analog Devices
AD9505KP

AD9505KP - Digitally Programmable Pulse-Edge Delay | Analog Devices

The Analog Devices AD9505KP is a digitally programmable pulse-edge delay vernier IC with 28 leads in a plastic leaded chip carrier package. The verified data identifies the device as an analog circuit in the clock and timing category and specifies a 28-pin PLCC package. Its core function is to provide controlled adjustment of pulse-edge timing for clock, data-path, and synchronization systems. A pulse-edge delay vernier is a timing-control integrated circuit used to shift the transition of a pulse by a programmable or controlled amount. These devices belong to the broader clock and timing hierarchy, alongside clock generators, phase-locked loops, frequency synthesizers, delay lines, and timing controllers. The AD9505KP is intended for systems where edge placement, phase alignment, or calibration must be adjusted while maintaining a fixed circuit footprint. The verified listing describes the AD9505KP as a digitally programmable pulse-edge delay vernier and identifies the package as 28-pin PLCC. Because the supplied snippets do not expose the detailed electrical timing range, input frequency, output frequency, propagation delay, logic levels, control interface, temperature range, or absolute maximum ratings, those values must be confirmed from the manufacturer datasheet before design release. The package information and device function are suitable for initial component identification, but they do not establish a complete timing specification. AD9505KP devices are associated with clock and timing applications, including digital interface timing, phase adjustment, synchronization networks, clock distribution, instrumentation, and communication equipment. The part can be useful when a fixed-frequency clock requires edge repositioning or where multiple signals must be aligned within a system. The exact implementation depends on the supported logic levels, delay range, control format, and timing specifications in the official documentation. For PCB design, confirm the 28-lead PLCC footprint, pin orientation, exposed-contact requirements, and recommended decoupling against the Analog Devices datasheet. Do not infer a replacement part solely from package similarity; timing range, control protocol, logic compatibility, and pin function must match. This page combines verified distributor identification, package details, source links, and explicit data gaps rather than estimating undocumented parameters.

询价 联系我们
AD9516-0BCPZ-REEL7 - 14-Output Clock Generator 2.95 GHz VCO | ADI
AD9516-0BCPZ-REEL7

AD9516-0BCPZ-REEL7 - 14-Output Clock Generator 2.95 GHz VCO | ADI

The Analog Devices AD9516-0BCPZ-REEL7 is a 14-output clock generator with an integrated 2.55 GHz to 2.95 GHz on-chip VCO, packaged in a 64-lead LFCSP (VFQFN with exposed pad) for surface-mount assembly and shipped on a 7-inch reel. It provides multi-output clock distribution with subpicosecond jitter performance and combines an integer-N PLL, VCO, and 14 configurable output channels spanning LVPECL, LVDS, and CMOS levels. The internal VCO is tunable across 2.55 GHz to 2.95 GHz and feeds an output frequency divider block that synthesizes frequencies down to DC. The BCPZ tape-and-reel suffix designates the production packaging format used by high-volume SMT lines. What is a clock generator IC? A clock generator is a timing integrated circuit that synthesizes one or more precise output frequencies from a single reference input using a phase-locked loop (PLL), voltage-controlled oscillator (VCO), and frequency dividers. In the broader taxonomy, a clock generator is a sub-category of clock and timing ICs, which themselves fall under interface and signal-conditioning semiconductors. Clock generators are essential building blocks in any system that requires multiple synchronized low-jitter clocks derived from a common reference. Key features of the AD9516-0 include 14 clock outputs across three logic families (LVPECL, LVDS, CMOS), independent output dividers per channel, and dedicated digital delay adjustment on each output. The PLL core supports reference frequencies up to 250 MHz, while the on-chip VCO spans 2.55 GHz to 2.95 GHz, allowing it to cover the 2.5G/3G cellular bands and adjacent microwave frequencies. A separate LVPECL power supply operates from 2.5 V to 3.3 V nominal. Architecturally, the AD9516-0 uses an integer-N PLL with on-chip loop filter components, a high-Q LC-tank VCO, and a divider tree that can produce output frequencies from DC up to 1.6 GHz on LVPECL channels. SPI/I2C serial programming provides in-system adjustment of all parameters, including output frequency, divider ratio, delay, and slew rate, making it suitable for adaptive radio and reconfigurable instrumentation platforms. Typical applications include clocking high-speed data converters (ADC/DAC) in wireless base stations, distributing reference clocks in radar and electronic warfare systems, providing low-jitter clocks for FPGA and ASIC SerDes blocks, and timing generation in medical imaging and industrial test equipment. When designing with this device, ensure the exposed pad is soldered to a sufficient ground plane for thermal dissipation and provide clean PCB layout to maintain subpicosecond jitter performance.

询价 联系我们
AD9609BCPZ-80 - 10-Bit 80 MSPS 1.8V ADC | Analog Devices
AD9609BCPZ-80

AD9609BCPZ-80 - 10-Bit 80 MSPS 1.8V ADC | Analog Devices

The Analog Devices AD9609BCPZ-80 is a monolithic, single-channel, 10-bit analog-to-digital converter operating from a 1.8 V analog supply and a 3.3 V output supply, sampling at up to 80 MSPS in a 32-lead LFCSP-VQ (5x5 mm) package with exposed pad. It integrates a high-performance sample-and-hold circuit and an on-chip voltage reference, and uses a multistage differential pipelined architecture that delivers 61.5 dBFS SNR at 9.7 MHz input and 75 dBc SFDR at 9.7 MHz input, with 61.0 dBFS SNR and 73 dBc SFDR maintained at 200 MHz input. An analog-to-digital converter (ADC) is a mixed-signal integrated circuit that converts continuous-time analog voltages into discrete digital codes at a defined sampling rate, forming the critical interface between the analog sensor/frontend world and the digital signal-processing world. Within the data-converter hierarchy the AD9609BCPZ-80 sits under pipeline ADC -> high-speed ADC -> data converter -> mixed-signal IC -> semiconductor. Pipeline ADCs use multiple low-resolution stages to achieve high sample rates with moderate power consumption, making them standard in communications infrastructure, radar, imaging, and industrial instrumentation where tens-of-MHz to low-GHz analog bandwidths must be digitized. Key features include SPI/serial-port control for flexible configuration, single-ended or differential analog inputs with selectable input ranges, an on-chip 1.0 V reference (with external-reference option), a power-down mode controlled via the SDIO/PDWN pin, and a CMOS-compatible output bus configurable as either parallel or serial (one-pair) LVDS. The combination of a 1.8 V analog core and 3.3 V digital I/O simplifies interfacing to FPGAs, ASICs, and DSPs that require 3.3 V logic-level outputs without level shifters. Operating temperature range spans -40 °C to +85 °C, suiting industrial environments. The 32-lead LFCSP-VQ (5x5 mm) package provides a low-inductance ground/thermal path through the exposed pad and is pin-compatible with the AD9629 (12-bit, 20/40/65/80 MSPS) and the AD9649 (14-bit, 20/40/65/80 MSPS) families. This enables a simple migration path between 10-bit and 14-bit converters sampling from 20 MSPS to 80 MSPS, allowing board reuse across different resolution nodes with no PCB rework. Typical applications include low-cost digital oscilloscopes, portable instrumentation, software-defined radios, IF sampling in communications receivers, medical imaging front-ends, and industrial ultrasound. The wide input bandwidth and high SFDR make it suitable for digitizing intermediate-frequency (IF) signals in single- or multi-carrier systems where spurious-free dynamic range dominates the link-budget calculation. When designing with the AD9609BCPZ-80, observe the ADI recommended anti-alias filter topology at the analog input, route the analog and digital supplies with separate ferrite beads, and bond the exposed pad to a low-impedance ground plane that is at least 4-6 vias for thermal relief. Decouple each supply pin with a 0.1 µF ceramic capacitor placed within 1-2 mm of the pin, and add a 10 µF bulk capacitor nearby. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, application-grade design notes, and a side-by-side comparison table with the AD9629 and AD9649 families that is not found in the manufacturer datasheet alone.

询价 联系我们
AD9609XCPZ-40 - 10-Bit 40 MSPS ADC, 1.8V, LFCSP-32 | ADI
AD9609XCPZ-40

AD9609XCPZ-40 - 10-Bit 40 MSPS ADC, 1.8V, LFCSP-32 | ADI

The Analog Devices AD9609XCPZ-40 is a monolithic, single-channel, 10-bit analog-to-digital converter (ADC) that operates from a single 1.8 V analog supply and samples at 40 MSPS. Housed in a 32-lead LFCSP (5 mm x 5 mm) package, the AD9609XCPZ-40 belongs to the AD9609 speed-grade family (20/40/65/80 MSPS) and includes a high-performance sample-and-hold circuit plus an on-chip voltage reference for simplified board design. An ADC (analog-to-digital converter) is a data acquisition component that converts continuous-time continuous-amplitude analog signals into discrete-time discrete-amplitude digital codes. Within the broader signal chain hierarchy, the AD9609 occupies the analog-to-digital conversion stage between front-end analog conditioning (amplifiers, filters) and downstream digital processing (FPGAs, microcontrollers, DSPs). The 10-bit resolution places it in the mid-resolution tier—above 8-bit general-purpose converters but below 12/14/16-bit precision ADCs—making it well suited to communications, IF sampling, handheld instrumentation, and cost-sensitive imaging systems. Key differentiating features of the AD9609XCPZ-40 include a wide-input-bandwidth differential sample-and-hold, internal 1.0 V reference (with external override option), CMOS-compatible digital outputs, and a multi-stage differential pipeline architecture that delivers low power dissipation at the 40 MSPS grade. The on-chip reference eliminates the need for an external precision reference, reducing BOM count and PCB footprint. Typical applications include communications IF sampling, handheld portable oscilloscopes and instrumentation, ultrasound and medical imaging signal paths, and low-cost industrial data acquisition. The single-channel 1.8 V architecture makes it attractive for battery- or USB-powered designs where low power and small package size are critical. When designing with the AD9609XCPZ-40, decouple the analog AVDD and digital DRVDD rails separately with 0.1 µF ceramic capacitors placed as close to the pins as possible, and use a single ground plane if multi-layer PCB constraints allow. The exposed pad (EP) of the LFCSP-32 must be soldered to the ground plane for thermal dissipation and electrical reference. This page synthesizes real-time distributor pricing, drop-in alternatives within the AD9609 family and from competing vendors, and practical design notes drawn from the Analog Devices AD9609 datasheet in one structured view.

询价 联系我们
AD9609XCPZ-80 - 10-Bit 80 MSPS 1.8V ADC | Analog Devices
AD9609XCPZ-80

AD9609XCPZ-80 - 10-Bit 80 MSPS 1.8V ADC | Analog Devices

The Analog Devices AD9609XCPZ-80 is a monolithic, single-channel 10-bit analog-to-digital converter (ADC) specified for 80 MSPS sampling rate on a 1.8 V supply, packaged in a 32-lead LFCSP (5x5 mm). The same silicon family also supports 20/40/65 MSPS grades (AD9609XCPZ-20/40/65) selected via the speed grade pin option, making this -80 variant the highest-speed member of the AD9609 family. What is a high-speed pipeline ADC? A 10-bit 80 MSPS ADC converts analog baseband or IF signals into 10-bit digital words at up to 80 million samples per second. In the broader taxonomy, the AD9609 sits at: ADC -> data converter -> data acquisition IC -> signal chain -> mixed-signal semiconductor. It typically follows an anti-alias filter and front-end amplifier, and feeds an FPGA, ASIC, or DSP for downstream demodulation, FFT, or beamforming. Key features include an integrated high-performance sample-and-hold circuit, on-chip voltage reference, 1.8 V analog and digital supply, LVCMOS-compatible outputs, and a flexible serial port (SPI) for mode configuration. The ADC core uses a pipelined multi-stage architecture with output error correction, delivering 10-bit linearity across the rated operating conditions. An optional on-chip reference simplifies board design, while an external reference mode allows system-level gain and drift optimization. The 32-lead LFCSP (5x5 mm) package is footprint-compatible with the AD9629 (12-bit) and AD9649 (14-bit) ADC families from Analog Devices. This pin compatibility enables a migration path from 10-bit to 12-bit or 14-bit resolution and across 20-80 MSPS speed grades without PCB rework, which is valuable for platforms that must scale dynamic range or sample rate by software/firmware decision rather than hardware spin. Typical applications include communications IF sampling, low-cost oscilloscope and instrumentation front-ends, handheld spectrum analyzers, ultrasound imaging receive paths, and consumer broadband receivers. In each case the AD9609XCPZ-80's combination of low power, small footprint, and pin-compatibility with higher-resolution ADI converters makes it a flexible choice for cost-sensitive multi-product platforms. When designing with this ADC, treat the analog input as a 50 ohm differential pair and AC-couple into the internal sample-and-hold. Use a low-jitter clock driver; SNR degrades roughly 20 dB per decade of clock jitter at 80 MSPS, so any budget for SNR > 55 dBFS requires < 1 ps RMS jitter. Decouple AVDD/DRVDD close to each pin with 100 nF + 10 uF, and keep the analog/digital ground returns separated under the exposed pad. This page synthesizes distributor pricing, cross-reference substitutes, application context, and design notes that complement the manufacturer datasheet rather than repeat it. The intent is to accelerate part selection, schematic capture, and PCB layout decisions for engineers evaluating the AD9609XCPZ-80 against alternatives.

询价 联系我们
AD9613BCPZ-250 - 12-Bit 250 MSPS Dual ADC | Analog Devices
AD9613BCPZ-250

AD9613BCPZ-250 - 12-Bit 250 MSPS Dual ADC | Analog Devices

The Analog Devices AD9613BCPZ-250 is a dual 12-bit, 250 MSPS analog-to-digital converter (ADC) with a pipelined architecture, integrated sample-and-hold, and internal voltage reference, housed in a 64-lead LFCSP-VQ (9x9 mm) package with exposed pad. An ADC (analog-to-digital converter) is a data-acquisition integrated circuit that converts continuous analog signals into discrete digital codes for downstream DSP, FPGA, or microprocessor processing. Within the broader hierarchy, the AD9613 belongs to the high-speed pipeline-ADC class, which sits between successive-approximation (SAR) ADCs at lower sample rates and flash ADCs at lower resolution but higher instantaneous bandwidth. Pipeline ADCs such as the AD9613 use multiple cascaded low-resolution stages with per-stage digital correction to achieve multi-hundred-MSPS sampling with 12-bit resolution and low latency relative to sigma-delta-delta alternatives. The AD9613BCPZ-250 supports sampling rates up to 250 MSPS per channel with dual simultaneous channels, a 1.8 V analog supply, and an LVDS-compatible digital output interface. Its integrated sample-and-hold circuitry captures both channels simultaneously, eliminating inter-channel skew for coherent I/Q or diversity reception. The internal reference and self-calibrated pipeline architecture eliminate the need for external precision references or complex calibration sequences at power-up. Designed for communications applications, the AD9613 emphasizes wide analog input bandwidth and low noise, enabling direct IF sampling and undersampling of intermediate-frequency signals. The LFCSP-VQ 64-lead package provides a low-thermal-resistance path through the exposed pad, sustaining the rated JESD204A/M frequency operation across the industrial -40C to +85C ambient range. This page synthesizes distributor pricing, drop-in alternatives, and practical layout notes not found in the manufacturer datasheet alone. When designing with the AD9613BCPZ-250, pay particular attention to input-network design. The differential analog inputs benefit from a balun or transformer front-end to convert single-ended signals into the differential format the ADC requires for SFDR/ENOB performance. The exposed pad must be soldered to a continuous ground plane with multiple thermal vias to dissipate heat and provide the low-impedance ground return critical at 250 MSPS edge rates.

询价 联系我们
AD9627ABCPZ-125 - Dual 12-Bit 125 MSPS ADC | Analog Devices
AD9627ABCPZ-125

AD9627ABCPZ-125 - Dual 12-Bit 125 MSPS ADC | Analog Devices

The AD9627ABCPZ-125 is a dual, 12-bit, 125 MSPS analog-to-digital converter (ADC) from Analog Devices, designed for communications applications where low cost, small size, and versatility are desired. It operates from a 1.8 V supply and features a serial SPI interface, packaged in a 64-lead LFCSP (VFQFN) with exposed pad. The device provides excellent dynamic performance with SNR of 65.8 dBc (66.8 dBFS) and SFDR of 85 dBc at 70 MHz input frequency, making it suitable for demanding signal processing chains. An analog-to-digital converter (ADC) is a critical component in mixed-signal systems that converts continuous analog signals into discrete digital values for processing by digital logic. The AD9627 belongs to the high-speed ADC family, which is essential in applications such as wireless base stations, radar, and test equipment. As a dual-channel device, it enables simultaneous sampling of I/Q signals in quadrature receivers, reducing component count and simplifying board layout. The ADC's performance directly impacts system dynamic range, sensitivity, and overall signal fidelity. Key features of the AD9627ABCPZ-125 include dual 12-bit ADC cores, sampling rates up to 125 MSPS, and a low power consumption of approximately 1.1 W at full speed. The device supports both parallel CMOS and LVDS output modes, providing flexibility in interfacing with FPGAs or DSPs. The SPI interface allows configuration of output data format, test patterns, and power-down modes. The 64-lead LFCSP package measures 9 mm x 9 mm with a 0.5 mm pitch, offering a compact solution for space-constrained designs. Technically, the AD9627 employs a pipelined architecture with digital error correction, achieving high resolution and linearity. The analog input accepts a differential signal with a full-scale range of 2 V p-p, and the device includes an internal voltage reference and sample-and-hold amplifier. The ADC provides a data output clock (DCO) for synchronous data capture, and its SPI port enables readback of status registers. The device operates over the industrial temperature range of -40°C to +85°C, ensuring reliability in harsh environments. Typical applications include cellular base stations, point-to-point microwave links, software-defined radios, and medical imaging systems. The dual-channel capability is particularly advantageous in diversity receivers and beamforming arrays, where multiple channels must be sampled simultaneously. The low power and small footprint make it ideal for multi-channel systems where board space and thermal budget are limited. When designing with the AD9627ABCPZ-125, ensure proper decoupling of the analog and digital supplies, and provide a clean, low-jitter sampling clock to achieve rated SNR. The exposed pad should be soldered to a solid ground plane for thermal management. The SPI interface allows dynamic adjustment of output modes, enabling optimization for different system requirements.

询价 联系我们
AD9629XCPZ-40 - 12-Bit, 40 MSPS ADC, 1.8V | Analog Devices
AD9629XCPZ-40

AD9629XCPZ-40 - 12-Bit, 40 MSPS ADC, 1.8V | Analog Devices

The Analog Devices AD9629XCPZ-40 is a monolithic, single-channel, 1.8 V supply, 12-bit analog-to-digital converter (ADC) sampling at 40 MSPS, packaged in a 32-lead LFCSP (CP-32-3). It is part of the AD9629 family, which also includes 20 MSPS, 65 MSPS, and 80 MSPS speed grades, all sharing the same pin-compatible LFCSP-32 footprint. The part integrates a high-performance sample-and-hold circuit and an on-chip voltage reference, eliminating the need for external reference components in most designs. An analog-to-digital converter (ADC) is a mixed-signal integrated circuit that converts continuous-time analog signals into discrete digital codes at a specified sample rate. ADCs sit between the analog front end (sensors, amplifiers, filters) and the digital back end (DSP, FPGA, microcontroller), and their speed, resolution, and noise performance directly limit overall system fidelity. Within this hierarchy, the AD9629XCPZ-40 belongs to the category of pipeline ADCs (it is a successive-style 12-bit converter with an integrated input bandwidth and reference), a subfamily of data converters -> data acquisition -> mixed-signal ICs -> integrated circuits. ADCs are typically specified by sample rate (MSPS), resolution (bits), signal-to-noise ratio (SNR), spurious-free dynamic range (SFDR), input bandwidth, and power dissipation. Key features include 12-bit resolution, 40 MSPS sample rate, single 1.8 V analog supply, low power consumption suitable for portable and battery-powered instrumentation, CMOS-compatible digital outputs, and a pin-compatible upgrade path to the 10-bit AD9609 and 14-bit AD9649 in the same LFCSP-32 package. The on-chip voltage reference reduces external BOM and PCB area, while the integrated sample-and-hold supports full Nyquist operation to over 40 MHz analog input bandwidth. The 1.8 V supply voltage enables direct interface to modern low-voltage FPGAs and ASICs without level shifters. Typical applications include communications IF/RF digitisation, portable ultrasound imaging, handheld industrial instruments, low-cost digital oscilloscopes, multichannel data acquisition front ends, and software-defined radio (SDR) receiver IF stages. The AD9629's pin compatibility with the AD9609 (10-bit) and AD9649 (14-bit) makes it the natural choice for designers who want a single PCB layout that supports multiple resolution tiers or future upgrades without redesign. When designing with this ADC, place the input network components as close to the analog input pins as possible to preserve SNR. Provide a low-impedance, low-noise analog supply with adequate decoupling to meet the published AC performance, and route the CMOS digital outputs away from the analog input traces to minimise digital-to-analog crosstalk. This page synthesises distributor pricing, drop-in pin-compatible alternatives from the same AD9609/AD9629/AD9649 family, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
AD9649W - 14-Bit 80MSPS 1.8V ADC | Analog Devices | LFCSP-32
AD9649W

AD9649W - 14-Bit 80MSPS 1.8V ADC | Analog Devices | LFCSP-32

The Analog Devices AD9649W is a monolithic, single-channel, 1.8 V supply, 14-bit analog-to-digital converter (ADC) supporting 20/40/65/80 MSPS sampling rates, housed in a 32-lead LFCSP EP (exposed-pad) package. The 'W' suffix denotes the military/aerospace temperature grade variant of the AD9649, which is the wide-temperature screened version of the family. The part features a high-performance sample-and-hold circuit, an on-chip voltage reference, and an LVDS/CMOS-compatible digital output interface, making it suitable for high-density multi-channel systems. An ADC (analog-to-digital converter) is a semiconductor device that converts real-world analog signals into discrete digital codes for processing by FPGAs, DSPs, or microcontrollers. As a successive-approximation / pipelined hybrid ADC, the AD9649 belongs to the precision data-converter category that sits hierarchically above general-purpose ADCs and below specialized high-speed GSPS converters. Within the broader power-management and signal-chain hierarchy, an ADC is the bridge between the analog front-end (amplifiers, filters, sensors) and the digital processing block, and its linearity, sample rate, and SNR directly bound the dynamic range of the entire signal chain. Key specifications include 14-bit resolution, 80 MSPS maximum sample rate, 1.8 V core supply (1.7 V to 1.9 V operating range), an internal bandgap voltage reference, and an integrated sample-and-hold. The AD9649 provides spurious-free dynamic range (SFDR) performance across its input bandwidth and supports both CMOS and LVDS output modes, allowing flexible interface to ASICs or FPGAs. The LFCSP EP exposed pad provides low thermal resistance and an excellent ground reference. Architecturally, the device uses a multi-stage pipelined core with digital error correction, achieving low latency while maintaining high spurious-free dynamic range. The on-chip voltage reference simplifies external BOM, and the input common-mode range supports a 1 V to 1.8 V input swing for direct-coupled IF sampling. Power consumption scales with sample rate and output mode. Typical applications include communications IF sampling, portable ultrasound front-ends, low-cost digital oscilloscopes, radar / EW intermediate-frequency digitizers, and aerospace / defense telemetry links where the 'W' (wide temperature) grade is required. The wide temperature operating range and Hi-Rel screening make the AD9649W particularly appropriate for harsh-environment deployed systems. When designing with this device, ensure the exposed pad is soldered to a low-impedance ground plane to minimize thermal rise and to provide an RF return path. Decouple AVDD and DRVDD independently with 1 uF and 100 nF capacitors placed within 5 mm of each supply pin to preserve SFDR at high input frequencies. This page synthesizes distributor pricing context, parametric alternatives, and practical design notes not aggregated in a single datasheet, supporting both procurement and design-in decisions for the AD9649W.

询价 联系我们
AD9652BBCZ - 16-Bit 310 MSPS Dual ADC | Analog Devices
AD9652BBCZ

AD9652BBCZ - 16-Bit 310 MSPS Dual ADC | Analog Devices

The AD9652BBCZ is a dual, 16-bit analog-to-digital converter (ADC) from Analog Devices, designed for high-speed signal processing applications requiring exceptional dynamic range over a wide input frequency range up to 465 MHz. It operates at sampling speeds up to 310 MSPS and is available in a 144-ball CSP_BGA package (10x10 mm). The device supports 3.3 V and 1.8 V power supplies, making it suitable for a variety of high-performance systems. An ADC (Analog-to-Digital Converter) is a critical component in signal processing chains that converts continuous analog signals into discrete digital values for processing by digital systems. The AD9652 is a pipelined ADC, a type of ADC architecture that uses multiple stages to achieve high speed and high resolution simultaneously. Pipelined ADCs are widely used in applications such as communications, radar, and medical imaging, where high sample rates and high resolution are essential. The AD9652 fits into the broader category of data converters, which are fundamental building blocks in mixed-signal systems. Key features of the AD9652 include dual 16-bit ADCs with sampling rates up to 310 MSPS, a 3-wire SPI-compatible serial interface for programming and control, and LVDS output data with a double data rate (DDR) clock. The device also includes an overrange bit for each ADC, providing additional dynamic range information. The AD9652 is specified over the industrial temperature range of -40°C to +85°C, ensuring reliable operation in demanding environments. The AD9652 utilizes a pipelined architecture that balances speed and resolution, achieving high dynamic performance while maintaining low power consumption. The device integrates two ADCs in a single package, reducing board space and simplifying system design. The LVDS outputs support high-speed data transfer with minimal noise, and the SPI interface allows flexible configuration of the device's operating modes. Typical applications for the AD9652 include communications systems (such as base stations and software-defined radios), radar systems, medical imaging equipment, and test and measurement instruments. Its high sample rate and resolution make it ideal for capturing wideband signals with high fidelity. When designing with the AD9652, it is important to provide clean power supplies and proper decoupling to achieve optimal performance. The device's LVDS outputs should be terminated correctly to ensure signal integrity at high data rates.

询价 联系我们
AD9656BBCZ - Quad 16-Bit 125 MSPS ADC | Analog Devices
AD9656BBCZ

AD9656BBCZ - Quad 16-Bit 125 MSPS ADC | Analog Devices

The AD9656BBCZ is a quad, 16-bit, 125 MSPS analog-to-digital converter (ADC) from Analog Devices, featuring an on-chip sample-and-hold circuit and JESD204B Subclass 1 coded serial digital outputs. It operates from a single 1.8 V power supply and is optimized for low cost, low power, small size, and ease of use, making it ideal for space-constrained, high-channel-count systems. The device is available in a 56-lead LFCSP-WQ (8x8 mm) package. An analog-to-digital converter (ADC) is a critical component in signal processing chains that converts continuous analog signals into discrete digital values for processing by digital systems. The AD9656 is a high-speed, pipelined ADC, a type that uses multiple successive stages to achieve high sampling rates while maintaining excellent dynamic performance. It sits within the hierarchy of data converters, which are essential in applications ranging from communications and radar to medical imaging and test equipment. Key features of the AD9656 include a signal-to-noise ratio (SNR) of 79.9 dBFS at 16 MHz input frequency (with VREF = 1.4 V) and 78.1 dBFS at 64 MHz, and a spurious-free dynamic range (SFDR) of 86 dBc up to Nyquist. The JESD204B interface simplifies high-speed data transfer to FPGAs and ASICs, reducing pin count and layout complexity. The device also offers a flexible input range and supports multiple output modes, enhancing design versatility. Technically, the AD9656 employs a pipelined architecture with digital error correction, achieving high resolution and linearity. The on-chip sample-and-hold ensures accurate sampling of high-frequency signals. The device is designed for low power consumption, which is critical in multi-channel systems where thermal management is a concern. The 1.8 V supply rail aligns with modern low-power digital logic, simplifying power supply design. Typical applications include communications receivers (e.g., cellular base stations, software-defined radio), radar systems, medical ultrasound, and multi-channel data acquisition. The quad-channel configuration and high sampling rate make it particularly suited for I/Q demodulation and beamforming applications where multiple synchronized channels are required. When designing with the AD9656, ensure proper decoupling of the 1.8 V supply and careful layout of the analog input traces to minimize noise. The JESD204B interface requires a stable reference clock and proper configuration of the subclass 1 deterministic latency. Refer to the datasheet for detailed application circuits and layout guidelines.

询价 联系我们
AD9680 - 14-Bit 1.25 GSPS Dual ADC | Analog Devices
AD9680

AD9680 - 14-Bit 1.25 GSPS Dual ADC | Analog Devices

The AD9680 is a dual, 14-bit, 1.25 GSPS/1 GSPS/820 MSPS/500 MSPS analog-to-digital converter (ADC) from Analog Devices. It features an on-chip buffer and sample-and-hold circuit designed for low power, small size, and ease of use. The device operates from a 1.2 V/2.5 V supply and is available in a 64-lead LFCSP (9x9 mm) package. It is recommended for new designs and is ideal for high-speed data acquisition, radar, and communications applications. An analog-to-digital converter (ADC) is a device that converts continuous analog signals into discrete digital numbers. The AD9680 is a high-speed, dual-channel ADC that samples at rates up to 1.25 GSPS, making it suitable for wideband signals. It uses a pipelined architecture to achieve high throughput with low latency. The device includes a JESD204B serial interface for high-speed data transfer to FPGAs or ASICs, reducing the number of I/O pins required. Key features include 14-bit resolution, dual-channel operation, and sample rates up to 1.25 GSPS. The device offers excellent dynamic performance with high SFDR and SNR, making it suitable for demanding applications. It also includes a programmable gain amplifier (PGA) and digital down-conversion (DDC) options for flexible signal processing. The JESD204B interface supports lane rates up to 15 Gbps, enabling high-speed data transfer. The AD9680 uses a pipelined ADC architecture with digital error correction, achieving high linearity and low noise. The on-chip buffer eliminates the need for external drivers, simplifying the front-end design. The device also includes a sample-and-hold circuit that ensures accurate sampling of high-frequency signals. The LFCSP package provides excellent thermal performance and is suitable for space-constrained designs. Typical applications include radar systems, software-defined radio, test and measurement equipment, and communications infrastructure. The AD9680's high sample rate and resolution make it ideal for capturing wideband signals with high fidelity. Its dual-channel configuration enables I/Q demodulation in quadrature receivers, reducing system complexity. When designing with the AD9680, ensure proper power supply decoupling and a clean clock source to achieve optimal performance. The JESD204B interface requires careful PCB layout to maintain signal integrity at high lane rates. Refer to the datasheet for recommended layout guidelines and configuration register settings.

询价 联系我们
AD9680BBCZ - Dual 14-Bit 1.25 GSPS ADC | Analog Devices
AD9680BBCZ

AD9680BBCZ - Dual 14-Bit 1.25 GSPS ADC | Analog Devices

The AD9680BBCZ is a dual, 14-bit, 1.25 GSPS analog-to-digital converter (ADC) from Analog Devices, designed for sampling wide bandwidth analog signals up to 2 GHz. It features an on-chip buffer and sample-and-hold circuit, optimized for low power, small size, and ease of use. The device operates from 1.2 V and 2.5 V supplies and is available in a 64-lead LFCSP package (9x9 mm). An analog-to-digital converter (ADC) is a critical component in signal processing chains that converts continuous analog signals into discrete digital values for processing by digital systems. The AD9680 belongs to the class of high-speed, high-resolution ADCs used in applications such as radar, communications, and test equipment. It sits within the hierarchy of data converters, which are essential building blocks in mixed-signal systems. Key features include dual-channel operation, 14-bit resolution, and sampling rates of 1.25 GSPS, 1 GSPS, 820 MSPS, and 500 MSPS. The device supports a wide input bandwidth of up to 2 GHz, making it suitable for direct RF sampling applications. It also includes features such as on-chip dithering, a programmable clock divider, and a serial interface for configuration. The AD9680 utilizes a pipelined architecture with an integrated sample-and-hold circuit, enabling high-speed conversion with low power consumption. The device is designed to interface directly with FPGAs and DSPs via a JESD204B serial output, simplifying data transfer and reducing pin count. The LFCSP package provides excellent thermal performance and is suitable for space-constrained designs. Typical applications include radar systems, software-defined radios, communications infrastructure, and test and measurement equipment. The AD9680's high sampling rate and wide bandwidth make it ideal for capturing high-frequency signals with high fidelity. When designing with the AD9680, ensure proper power supply decoupling and a clean clock source to achieve optimal performance. The device requires careful PCB layout to minimize noise and maintain signal integrity at high frequencies.

询价 联系我们
AD9680BCPZ-1000 - Dual 14-Bit 1 GSPS ADC | Analog Devices
AD9680BCPZ-1000

AD9680BCPZ-1000 - Dual 14-Bit 1 GSPS ADC | Analog Devices

The Analog Devices AD9680BCPZ-1000 is a dual 14-bit pipelined analog-to-digital converter with two inputs, a maximum sampling rate of 1 GSPS for this ordering option, and a 64-lead LFCSP package measuring 9 mm by 9 mm. It is designed for high-speed signal conversion with JESD204B support. The device family supports 1.25 GSPS, 1 GSPS, 820 MSPS, and 500 MSPS operating modes. An ADC converts an analog voltage into a digital code for processing, storage, transmission, or measurement. The AD9680 belongs to the high-speed ADC category, combines a pipelined conversion architecture with on-chip input buffers and sample-and-hold circuits, and is intended for communications, instrumentation, radar, and test systems. Its dual-channel architecture allows two analog inputs to be digitized while preserving matched device characteristics. Key features include 14-bit resolution, dual simultaneous input capability, and operation from a 1.2 V or 2.5 V supply domain as identified in the verified product information. The JESD204B interface enables high-rate digital data transfer between the converter and compatible serializers or processors. The integrated input buffer and sample-and-hold circuit are specifically mentioned by the manufacturer as supporting low power, small size, and ease of use. At high conversion rates, the ADC must be paired with controlled analog input networks, adequate power delivery, proper clocking, and a digital interface capable of handling the resulting data rate. The two analog channels should use matched routing and impedance considerations to reduce channel-to-channel errors. JESD204B configuration, clock relationships, lane rates, reference voltage, and supported device features must be verified in the manufacturer datasheet before board release. Typical applications include wireless infrastructure, digital oscilloscopes, spectrum analyzers, radar receivers, communications test equipment, and broadband signal-processing systems. The AD9680 is particularly relevant where multiple high-speed analog channels must be converted into data suitable for high-speed serial transport. Designers should pay particular attention to the 9 mm by 9 mm LFCSP footprint, exposed-pad thermal management, decoupling, high-speed clock routing, analog input bandwidth, and JESD204B lane configuration. The verified sources identify the component and its major conversion characteristics, but do not provide a complete verified pinout, electrical limit table, lifecycle statement, pricing schedule, or qualified drop-in substitute set. This page consolidates the verified Analog Devices product information, distributor identifiers, application guidance, and design constraints. It also separates documented facts from missing parameters so that engineers can make sourcing decisions without confusing generic ADC recommendations with verified AD9680BCPZ-1000 data.

询价 联系我们
AD9680BCPZ-1250 - Dual 14-Bit 1.25 GSPS ADC JESD204B | Analog Devices
AD9680BCPZ-1250

AD9680BCPZ-1250 - Dual 14-Bit 1.25 GSPS ADC JESD204B | Analog Devices

The Analog Devices AD9680BCPZ-1250 is a dual-channel, 14-bit, 1.25 GSPS pipelined analog-to-digital converter (ADC) with a JESD204B high-speed serial output interface, housed in a 64-lead LFCSP (9 mm x 9 mm) package. It is designed for sampling wide-bandwidth analog input signals of up to 2 GHz. An ADC (analog-to-digital converter) is a mixed-signal semiconductor device that converts continuous analog waveforms into discrete digital data for processing by FPGAs, DSPs, or other digital logic. Within the signal-chain hierarchy, the AD9680 belongs to the RF-sampling, high-speed pipelined ADC class, sitting upstream of digital processing elements such as the Intel/Altera and Xilinx FPGAs commonly paired with it over JESD204B serial links. Key features include dual 14-bit conversion cores running at up to 1.25 GSPS per channel, an on-chip buffer and sample-and-hold circuit optimized for low power, small size, and ease of use, and a JESD204B serial data output that dramatically reduces pin count versus parallel LVDS/CMOS interfaces. Speed-grade variants of the same family offer 500 MSPS, 820 MSPS, 1 GSPS, and 1.25 GSPS, allowing a single PCB footprint to serve multiple bandwidth tiers. Technically, the pipelined architecture uses cascaded sub-ranging stages with digital error correction, enabling high sample rates while maintaining 14-bit resolution. The integrated input buffer eases drive requirements for wideband amplifiers or passive networks, and on-chip digital functions (DDC-style processing blocks per the ADI product family) reduce FPGA resource load in digital pre-distortion and observation-receiver designs. Typical applications include wideband software-defined radios, 3G/4G/5G cellular base-station receivers, digital pre-distortion (DPD) observation channels, and test-and-measurement instrumentation requiring GHz-class analog input bandwidth. Design consideration: operate within the recommended clock and supply architecture, and budget power and thermal performance for the 64-LFCSP thermally enhanced package, since multi-gigasample operation drives the dominant portion of power dissipation. This page synthesizes distributor pricing and availability, drop-in same-family speed-grade alternatives, and practical design guidance not consolidated in the manufacturer datasheet. Pricing shown is as of 2026-09-05.

询价 联系我们
AD9680BCPZ-500 - Dual 14-Bit 500 MSPS JESD204B ADC | Analog Devices
AD9680BCPZ-500

AD9680BCPZ-500 - Dual 14-Bit 500 MSPS JESD204B ADC | Analog Devices

The Analog Devices AD9680BCPZ-500 is a dual, 14-bit, 500 MSPS pipelined analog-to-digital converter (ADC) housed in a 64-lead LFCSP (9 mm x 9 mm) package with exposed pad, featuring a JESD204B serial digital output interface and 1.2 V/2.5 V dual supply operation. An analog-to-digital converter (ADC) is a mixed-signal integrated circuit that samples a continuous analog waveform and converts it into a discrete digital representation. High-speed ADCs like the AD9680 sit at the front end of the signal chain hierarchy - after amplification and filtering, and before digital processing in FPGAs or ASICs - making them critical components in any wideband data acquisition system. Key features include a 14-bit pipelined core per channel, a JESD204B high-speed serial output that drastically reduces pin count versus parallel LVDS or CMOS interfaces, an on-chip buffer and sample-and-hold circuit designed for low power, small size, and ease of use, and fast detect outputs (FD_A and FD_B on pins 17 and 32) for channel power monitoring. Architecturally, each channel uses a pipelined conversion topology in which the input is successively quantized by cascaded low-resolution stages, enabling 500 MSPS throughput while the integrated buffer relaxes external drive requirements. The multi-rail supply architecture (1.2 V core, 2.5 V analog) optimizes power consumption versus dynamic performance. Typical applications include software-defined radio and military communications receivers, wideband test and measurement instrumentation, cellular basestation receivers, and radar/electronic warfare systems where dual-channel simultaneous sampling at hundreds of megahertz is required. A key design consideration is the JESD204B link configuration and clocking architecture: a low-jitter sampling clock is essential to realize the full SNR potential of the 14-bit core, so engineers should budget jitter carefully and follow ADI reference designs for the SYSREF and device clock distribution. This page synthesizes verified distributor data, drop-in same-family alternatives, and practical engineering design guidance not found in a single manufacturer datasheet, providing a complete selection resource in one place.

询价 联系我们
AD9680BCPZRL7-1000 - Dual 14-Bit 1 GSPS ADC JESD204B | Analog Devices
AD9680BCPZRL7-1000

AD9680BCPZRL7-1000 - Dual 14-Bit 1 GSPS ADC JESD204B | Analog Devices

The Analog Devices AD9680BCPZRL7-1000 is a dual, 14-bit, 1 GSPS analog-to-digital converter (ADC) with a JESD204B serial data output interface, supplied in a 64-lead LFCSP (9 mm x 9 mm) package with exposed pad. An analog-to-digital converter (ADC) is a mixed-signal semiconductor that samples a continuous analog waveform and quantizes it into discrete digital values. High-speed pipelined ADCs such as the AD9680 sit at the top of the data-converter hierarchy, bridging the analog front end of an RF or IF signal chain to a digital processor, FPGA, or ASIC. In modern wideband receivers, the ADC defines the system's instantaneous bandwidth, dynamic range, and noise floor, making its selection one of the most impactful decisions in a digital receiver design. Key features of the AD9680 include dual 14-bit conversion cores rated at 1.25 GSPS (with the -1000 grade specified at 1 GSPS), an on-chip buffer and sample-and-hold circuit designed for low power, small size, and ease of use, and a JESD204B high-speed serial output that dramatically reduces pin count versus parallel LVDS/CMOS interfaces. The JESD204B lane interface supports multi-lane serialization with deterministic latency, simplifying FPGA interfacing. Architecturally, the AD9680 uses a pipelined conversion architecture with on-chip references and buffering, which minimizes external analog component count. The device operates from 1.2 V and 2.5 V supplies per the datasheet title (1.2 V/2.5 V operation), supporting low overall power consumption for its class. Multiple sampling-rate grades (1.25 GSPS / 1 GSPS / 820 MSPS / 500 MSPS) share a common register map, and ADI's SPI Controller software supports the AD9680, AD9234, and AD9690, easing design migration within the family. Typical applications include wideband software-defined radio (SDR) receivers, radar and electronic warfare digitizers, test and measurement instrumentation, and multi-channel communications infrastructure where two synchronized high-dynamic-range channels are required in a compact footprint. Design considerations: the JESD204B link requires careful FPGA-side lane mapping and sysref timing design, and the exposed-pad LFCSP package demands a well-designed thermal via array under the pad for rated performance. This page synthesizes distributor availability, same-family drop-in speed-grade alternatives, and practical design notes not found in the manufacturer datasheet alone. Pricing, where listed, is referenced as of 2026-09-05.

询价 联系我们
AD974AN - 16-Bit 4-Channel 200kSPS ADC | Analog Devices
AD974AN

AD974AN - 16-Bit 4-Channel 200kSPS ADC | Analog Devices

The Analog Devices AD974AN is a four-channel, 16-bit, 200 ksps data acquisition system with a serial interface, housed in a 28-pin DIP package. It combines a four-channel input multiplexer, a successive-approximation switched-capacitor ADC, and a +2.5 V internal reference on a single chip. The device operates from one +5 V supply, supports power-down operation, and accepts analog input ranges of 0 V to +4 V, 0 V to +5 V, or ±10 V. An ADC is an analog-to-digital converter, a semiconductor that transforms continuous analog voltage signals into digital codes for processing, measurement, or transmission. The AD974 belongs to the ADC hierarchy within data-conversion ICs and power-management-dependent signal-chain components. Its four-channel multiplexer allows one 16-bit ADC core to sample multiple analog inputs sequentially, reducing board area while preserving simultaneous data-acquisition capability. Key features include 16-bit resolution, four multiplexed analog inputs, a 200 ksps conversion rate, a serial data interface, and a +2.5 V internal reference. The single +5 V supply simplifies system power architecture. Supported input ranges include 0 V to +4 V, 0 V to +5 V, and ±10 V, enabling the same converter family to serve unipolar industrial, instrumentation, and bipolar measurement systems. The AD974 uses a successive-approximation, switched-capacitor conversion architecture. This architecture is appropriate for high-resolution, moderate-speed acquisition where a serial output is sufficient and per-channel simultaneous converters would add unnecessary cost and board space. The internal +2.5 V reference supports repeatable conversion behavior without requiring a separate reference circuit, although system accuracy still depends on appropriate analog conditioning, layout, and input-range configuration. Typical applications include industrial process monitoring, sensor acquisition, laboratory measurement equipment, data logging, and embedded instrumentation. The 200 ksps sampling rate is well suited to continuously updated measurements, while 16-bit resolution supports applications requiring more detail than typical 8-bit or 12-bit converters. The four-channel input structure is particularly useful when several related signals must be scanned through a shared ADC. Designers should account for input settling time, source impedance, reference accuracy, analog noise, and the sampling interval between multiplexed channels. Place input conditioning and decoupling close to the device, preserve clean grounding around the analog pins, and verify the configured input range against the source voltage. System-level error budget should also include multiplexer transition time and any external amplifier or sensor limitations.

询价 联系我们