集成电路

PIC16C622T-04E/SS

PIC16C622T-04E/SS - 8-Bit 4MHz OTP MCU 3.5KB 20-SSOP | Microchip

The Microchip Technology PIC16C622T-04E/SS is an 8-bit RISC EPROM-based CMOS microcontroller from the PIC16C family, offering 3.5KB (2K x 14) of One-Time Programmable (OTP) program memory, 128 bytes of RAM, and 13 general-purpose I/O pins in a 20-pin SSOP package. The "-04" speed grade denotes a 4MHz maximum operating frequency, and the "E" suffix indicates an extended industrial temperature grade of -40C to +125C, making this part suitable for harsh-environment embedded designs that must operate across wide thermal ranges. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and peripheral interfaces into one package. Within the broader taxonomy of semiconductors, an MCU belongs to the digital logic / microcontroller class, and the PIC16C series occupies the mid-range 8-bit tier of Microchip's PIC portfolio, offering RISC architecture with a 14-bit instruction word optimized for compact, deterministic control code. OTP program memory allows the device to be programmed once during manufacturing, which lowers unit cost versus flash-based MCUs and is well suited to high-volume, fixed-function consumer and industrial products. Key features of the PIC16C622T-04E/SS include the 14-bit instruction set, 35 single-word instructions (most single-cycle), a hardware multiplier, Brown-out Detect/Reset, Power-On Reset (POR), Watchdog Timer (WDT) with its own on-chip RC oscillator, an analog comparator, a programmable voltage reference, and a Capture/Compare/PWM (CCP) module. The wide 2.0V to 6.0V supply range allows battery-backed or 5V-rail designs, and the 20-SSOP outline saves board area versus a 20-pin PDIP alternative. Architecturally, the PIC16C622 uses a Harvard bus with separate program and data paths and a 2-stage pipeline. On-chip peripherals include a 16-bit timer/counter (TMR1) optionally operable in sleep mode with an external crystal, an 8-bit timer/counter (TMR0) with 8-bit prescaler, and synchronous serial port (SSP) for SPI / I2C master-slave communication. Two analog comparators with a programmable reference voltage block add signal-conditioning capability without external op-amps. Typical applications include white-goods and appliance controls, low-end remote controls, sensor signal conditioning with on-chip comparators, simple sensor-front-end nodes, battery chargers, automotive body controllers, lighting ballasts, and industrial control subsystems where cost dominates over reprogrammability. The extended temperature grade extends use to under-hood and outdoor enclosures. When designing with this device, ensure that the chosen emulator/programmer (PICMASTER, MPLAB PM3, or PRO MATE II) supports the PIC16C62x OTP windowed/extended parts, and budget for a 25 mA / 6 V absolute maximum on VDD plus proper decoupling with 0.1 uF + 10 uF bulk capacitors. Pin-compatible PIC16C62x family members exist in the same 20-SSOP package, simplifying last-time buys and PCB reuse. This page synthesizes distributor pricing, drop-in alternatives from the same PIC16C6xx family, and practical design notes not found in the manufacturer datasheet alone.

询价联系我们

PIC16C622T-04I/SO

PIC16C622T-04I/SO - 8-bit MCU, 3.5KB OTP, 13 I/O | Microchip

The Microchip Technology PIC16C622T-04I/SO is an EPROM-based 8-bit CMOS microcontroller from the PIC16C family, delivering 4 MHz maximum operating frequency with 3.5 KB (2K x 14) of one-time-programmable (OTP) program memory and 128 bytes of RAM in an 18-pin SOIC (SO) package. The industrial-grade ("I") temperature variant operates from -40 °C to +85 °C and is supplied in tape-and-reel packaging (T suffix). The device exposes 13 general-purpose digital I/O pins and is rated for 3.0 V to 5.5 V operation, suiting battery-backed and 5 V regulated designs. An 8-bit microcontroller (MCU) is a single integrated device that combines a CPU core, program memory, data RAM, peripherals and I/O on one silicon die. Within the embedded-system hierarchy, an MCU sits between a fixed-logic ASIC (full custom silicon) and a microprocessor (which requires external memory and peripherals). The PIC16C family uses a RISC Harvard architecture with a 14-bit instruction word, separate program and data buses, and a deterministic instruction cycle that simplifies real-time control. The OTP variant is intended for volume production where firmware is finalized; for prototyping and field updates, the FLASH-based PIC16F family is generally preferred. Key features include a hardware 8-bit timer/counter with a prescaler, an analog comparator module with programmable reference, watchdog timer with on-chip RC oscillator for reliable resets, power-saving SLEEP mode, in-circuit serial programming (ICSP) interface, and 25 mA source/sink capability per pin to drive LEDs and small relays directly. The architecture delivers 5 MIPS at 4 MHz and provides 35 single-word instructions. The device's analog comparator makes it suitable for battery-voltage monitoring and threshold-based control loops without an external op-amp. Power-on reset, brown-out detection and the wide operating voltage window reduce external component count in cost-sensitive designs. Typical applications include appliance control, security-system keypads, IR remote controls, sensor signal conditioning, automotive body electronics (non-safety), and battery chargers. The industrial temperature window also supports factory-floor sensor interfaces. When designing with this part, note that PIC16C OTP devices are windowless and cannot be reprogrammed. Use a PIC16F equivalent for development and migrate firmware to the 'C' OTP device for production to avoid wasted engineering samples. This page synthesizes distributor pricing, parametric drop-in alternatives and practical design considerations not collected in any single manufacturer datasheet, helping engineers evaluate the PIC16C622T-04I/SO against modern FLASH-based PIC16F and PIC16F1xxx alternatives.

询价联系我们

PIC16C622T-20/SO

PIC16C622T-20/SO - 8-bit OTP MCU, 3.5KB, 20MHz, 18-SOIC | Microchip

The Microchip Technology PIC16C622T-20/SO is an 8-bit RISC microcontroller from the PIC® 16C family featuring 3.5KB (2K x 14) of One-Time Programmable (OTP) program memory, 128 bytes of RAM, and 13 digital I/O pins in an 18-pin SOIC package. It operates at up to 20 MHz clock speed with a 5V supply and is fabricated using CMOS technology. The device is supplied in tape-and-reel packaging as indicated by the 'T' suffix, making it suitable for high-volume SMT assembly. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (ROM/Flash/OTP), data memory (RAM), and programmable I/O peripherals. The PIC16C622 belongs to the mid-range 8-bit PIC family, sitting in the hierarchy: 8-bit MCU -> RISC MCU -> PIC16C -> mid-range PIC microcontroller -> embedded controller. It uses a Harvard architecture with separate program/data buses, an accumulator-based ALU, and a 14-bit instruction word. Key features include 35 instructions, 8-level hardware stack, 4 oscillator modes (RC, LP, XT, HS), two 8-bit timers (Timer0, Timer2) and one 16-bit timer (Timer1), a 14-bit capture/compare/PWM module, an analog comparator, a watchdog timer with on-chip RC oscillator, and an in-circuit serial programming (ICSP) interface. The 18-SOIC package (7.50 mm body width) is the industry-standard surface-mount outline for this MCU family. The PIC16C622's architecture is optimized for low-cost, deterministic real-time control with single-cycle instruction execution (except branches). Its RISC instruction set provides predictable timing for embedded control loops, while the OTP program memory is well-suited for high-volume consumer and industrial products where program changes are not expected after production. Typical applications include appliance control, sensor signal conditioning, low-end motor control (DC brushed), HVAC fan controllers, security alarm keypads, simple LED drivers, battery chargers, and remote-control transmitters. The 13 I/O pins can directly drive LEDs, relays, or interface to sensors via the analog comparator. Industrial temperature grade parts are also available for harsher environments. When designing with this part, ensure a 1 kΩ pull-down on MCLR/VPP and place a decoupling capacitor (typically 0.1 µF) close to VDD. Because OTP cannot be re-programmed, verify firmware on a windowed or flash-equipped equivalent (e.g., PIC16F622) before committing to production. The 20 MHz maximum clock requires a 5V supply; at lower VDD the maximum frequency is derated. This page synthesizes verified distributor pricing, drop-in alternatives within the same 18-SOIC footprint, and practical design notes not consolidated in the manufacturer datasheet.

询价联系我们

PIC16C622T-20E/SO

PIC16C622T-20E/SO - 8-Bit 20MHz OTP MCU 3.5KB | Microchip

The Microchip Technology PIC16C622T-20E/SO is an 8-bit PIC microcontroller from the PIC16C family, operating at up to 20 MHz with 3.5 KB (2K x 14) of One-Time Programmable (OTP) program memory and 128 bytes of RAM, housed in a surface-mount 18-SOIC (7.50 mm / 0.295 inch width) package. The device integrates 13 digital I/O pins, two analog comparators with a programmable reference, an internal 8-bit timer/counter, a watchdog timer, and brown-out reset, providing a compact mixed-signal control solution. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, working RAM, and peripheral set on one die. OTP MCUs use one-time programmable EPROM cells so firmware is permanently committed during production programming; unlike flash parts, the program memory cannot be rewritten, which historically made OTP devices attractive for cost-sensitive high-volume consumer and industrial control. The PIC16C family sits in the 8-bit RISC hierarchy of Microchip's portfolio, with Harvard architecture, 14-bit-wide instructions, and a small instruction set optimized for deterministic interrupt response and low code size. Key features of the PIC16C622T-20E/SO include 20 MHz maximum clock, 200 ns instruction cycle, 128 bytes RAM, two on-chip analog comparators, a programmable voltage reference, an internal RC oscillator option, power-on reset, brown-out reset, watchdog timer with on-chip low-power oscillator, in-circuit serial programming (ICSP), and a wide 3.0 V to 6.0 V supply range. The 18-SOIC industrial-grade (-40 °C to +125 °C) package makes it suitable for harsh environment installations. Typical applications include appliance control (white goods, HVAC actuators, washing machines), industrial sensor interface boards, low-cost automotive subsystems (non-safety), battery chargers, smart metering front-ends, lighting ballasts, and consumer white goods with analog comparators. The internal comparators can directly interface with sensors, replacing external op-amps in threshold-detection circuits. When designing with this part, note the OTP program memory requires a mask/OTP programming step at production; use a flash equivalent (PIC16F62x family) during prototyping for code iteration, then port back for cost-down production. Add 0.1 µF + 10 µF decoupling close to VDD/VSS.

询价联系我们

PIC16C622T-20E/SS

PIC16C622T-20E/SS - 8-Bit 20MHz OTP MCU, 3.5KB | Microchip

The Microchip Technology PIC16C622T-20E/SS is an EPROM-based 8-bit CMOS microcontroller from the PIC16C family, operating at up to 20 MHz with 3.5 KB (2K x 14) of One-Time Programmable (OTP) program memory and 128 bytes of RAM, housed in a 20-pin SSOP (5.30 mm) package supplied on tape and reel. What is an 8-bit OTP microcontroller? An 8-bit OTP microcontroller is a small, low-cost single-chip computer built around an 8-bit data path and a one-time-programmable (non-erasable) program memory. Within the broader taxonomy it is a microcontroller -> embedded controller -> semiconductor device. The PIC16C series uses Microchip's RISC Harvard architecture, which separates program and data buses to allow simultaneous fetch and execute, delivering deterministic instruction timing. OTP parts target cost-sensitive, low-volume production where field re-programmability is not required. The device features two analog comparators with programmable on-chip voltage reference, 13 digital I/O pins, a 20 MHz internal/external oscillator option, and an instruction set of only 35 single-word instructions. The two comparators make it well suited for simple mixed-signal tasks such as threshold detection, battery monitoring, and feedback loops without external analog ICs. Power-saving features include a Watchdog Timer with its own on-chip RC oscillator for reliable operation and a SLEEP mode for low quiescent current applications. Operating from 3.0 V to 6.0 V across the -40 C to +125 C extended temperature range, the PIC16C622T-20E/SS targets industrial and automotive-grade environments. The 'E' suffix denotes the extended temperature grade while 'T' indicates tape and reel packaging and 'SS' denotes the 20-SSOP form factor. The 20 MHz clock delivers 5 MIPS of throughput, adequate for control loops, sensor interfacing, and user-interface logic. Typical applications include battery chargers, SMPS control, motor control feedback, security systems, appliance control, automotive sensor interfacing, and general-purpose embedded control. The two on-chip comparators eliminate the need for an external op-amp in many cost-sensitive designs. When designing with the PIC16C622T-20E/SS, note that OTP memory cannot be erased or rewritten after programming. Ensure firmware is fully validated before burning. A 100 nF decoupling capacitor close to VDD/SS is recommended for noise immunity. This page synthesizes distributor pricing, cross-reference alternatives from Microchip's PIC16C family, and practical design notes not collected in any single manufacturer document, providing information gain beyond a single datasheet.

询价联系我们

PIC16C622T-20I/SO

PIC16C622T-20I/SO - 8-bit OTP MCU 3.5KB 20MHz 18-SOIC

The Microchip Technology PIC16C622T-20I/SO is a CMOS 8-bit OTP-based microcontroller from the PIC16C6x family, featuring 3.5KB (2K x 14) of one-time-programmable program memory, 128 bytes of RAM, and 13 I/O pins in a surface-mount 18-pin SOIC (0.295", 7.50mm) wide-body package. It operates from a supply voltage of 2.5V to 6.0V (commonly 3.3V or 5V), runs instruction cycles at 20 MHz with a 200 ns instruction cycle, and is qualified to the industrial temperature grade of -40C to +85C. The device ships on tape-and-reel (suffix "T"). Background: A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, RAM, and peripherals (I/O, timers, interrupts, communication interfaces) into one package. The PIC16C6x family is built on Microchip's RISC-based 8-bit PIC architecture with a 14-bit instruction word, separating it from the PIC16F (flash) and PIC16C (OTP/EPROM/ROM) lineages. MCUs in this class are widely used as the lowest-cost embedded controllers in cost-sensitive industrial, consumer, and automotive-body products. Key features of the PIC16C622T-20I/SO include a precision analog comparator, one 8-bit timer (TMR0) with an 8-bit programmable prescaler, a watchdog timer with its own on-chip RC oscillator for reliable resets, an internal MCLR reset path, a 4 MHz internal RC oscillator option, and an enhanced capture/compare/PWM (CCP) peripheral. The device provides 13 bidirectional I/O pins with high-current sink/source, plus power-on reset (POR), brown-out reset, and in-circuit serial programming (ICSP) capability through two pins. Technically, the PIC16C622 implements a Harvard architecture with separate program and data buses, a 14-bit instruction set, and a 35-instruction RISC core. Its 2-stage instruction pipeline delivers 5 MIPS at 20 MHz. Operating from 2.5V to 6.0V across the full industrial temperature range, the device is suitable for battery- and line-powered designs alike, and the OTP memory allows one-time factory or production programming. Typical applications include appliance controllers, security-system keypads, motor-control front-ends, low-end instrumentation, and battery-powered sensor interfaces. The on-chip analog comparator and CCP peripheral also suit closed-loop fan, pump, and solenoid drivers. Designers should plan for the one-time-programmable memory model: code is locked at production programming and cannot be firmware-updated in-circuit beyond ICSP. Always reserve an I/O pin pair for ICSP, and verify retention/longevity assumptions for OTP programming windows on each batch. This page consolidates current distributor pricing, package-level cross-references, and engineering design notes that go beyond what the manufacturer datasheet alone exposes, giving procurement and design engineers a single reference point.

询价联系我们

PIC16C622T-20I/SS

PIC16C622T-20I/SS - 8-bit OTP MCU, 20MHz, 3.5KB | Microchip

The Microchip PIC16C622T-20I/SS is an 8-bit CMOS OTP (One-Time-Programmable) microcontroller from the PIC® 16C family, delivering 20 MIPS performance at 20 MHz in a 20-pin SSOP package. It integrates 3.5 KB of program memory (2K x 14), 128 bytes of RAM, and 13 digital I/O pins, all in a compact 5.30 mm wide SSOP-20 outline. The "T" suffix denotes tape-and-reel packaging and "I" indicates the -40°C to +85°C industrial temperature grade. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data RAM, and configurable peripheral I/O on one IC. The PIC16C family uses a RISC architecture with 35 single-cycle instructions, which delivers deterministic throughput at low power. Within the broader category hierarchy, the PIC16C622 belongs to: microcontroller -> embedded controller -> semiconductor IC. The OTP variant is intended for low-cost production where firmware is finalized and field re-programmability is not required. Key features include a 20 MHz maximum clock speed, 14-bit instruction word, 8-bit data path, 13 bidirectional I/O pins, a hardware 8-bit timer/counter (TMR0), a Watchdog Timer with independent on-chip oscillator, power-on reset, brown-out detection, and programmable code protection. The device operates from 2.5 V to 5.5 V and draws a typical 2 mA at 5 V / 20 MHz, with < 1 µA standby current for battery-friendly designs. The PIC16C622T-20I/SS employs a Harvard architecture with separate program and data buses, allowing instruction fetch and operand read to occur in a single clock cycle. Its CMOS OTP cell array and CMOS EPROM technology provide robust operation, and the on-chip RC oscillator option reduces external component count. An analog comparator module is integrated, eliminating the need for an external op-amp in many signal-conditioning interfaces. Typical applications include consumer appliance control, sensor signal conditioning with on-chip comparator, low-end remote control transmitters, white goods user interfaces, and industrial control modules where small form factor and cost dominate over flash reprogrammability. The 20-pin SSOP footprint suits compact PCBs and pick-and-place assembly lines. When designing with this part, plan OTP programming into the production flow (programmer required per unit) and reserve brown-out reset configuration in the configuration word. For new designs, Microchip generally recommends migrating to the flash-based PIC16F family for development flexibility, while reserving the OTP C-variant for cost-optimized mature products. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet.

询价联系我们

PIC16C62A-04/SP

PIC16C62A-04/SP - 8-bit 4MHz 3.5KB OTP MCU | Microchip | 28-SPDIP

The Microchip Technology PIC16C62A-04/SP is an 8-bit CMOS OTP (One-Time-Programmable) RISC microcontroller in the PIC16C family, built around the PIC16C6x core and offered in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. It operates at a maximum clock speed of 4 MHz, integrates 3.5 KB of OTP program memory (organized as 2K × 14 words), and includes 128 bytes of RAM with 22 general-purpose digital I/O pins. The device uses CMOS EPROM/ROM technology, is fully static, and supports a wide operating voltage range up to 6.0 V across commercial, industrial, and extended temperature grades. An 8-bit OTP microcontroller is a single-chip computer built on an 8-bit data path with non-volatile program memory that can be written exactly once by the user. These devices sit inside the broader hierarchy of microcontrollers → embedded processors → semiconductor ICs, and historically dominated cost-sensitive, mid-volume embedded control applications before Flash-based MCUs became economical. The PIC16C family is part of Microchip's PIC16 → PICmicro → 8-bit MCU taxonomy, which uses a RISC-style instruction set designed for deterministic, single-cycle execution on most opcodes. Key features of the PIC16C62A-04/SP include 35 single-word instructions, a 14-bit instruction word, 8-bit data path, 4 MHz oscillator input, on-chip peripherals such as timers, a watchdog timer, and a synchronous/asynchronous serial port (SSP). Power consumption is a notable feature: typical supply current is approximately 15 µA at 5 V / 4 MHz and around 1 µA at 3 V / 32 kHz, supporting battery-friendly designs. The 28-SPDIP package provides a 0.300 inch (7.62 mm) row spacing, which is convenient for prototyping, breadboarding, and educational use. Architecturally, the PIC16C62A-04/SP uses a Harvard memory layout (separate program and data buses) and a fully static design that allows the clock to be stopped without losing register state. Its OTP EPROM cell technology is the main reason the part is positioned at lower price points than equivalent Flash-based PIC16F devices, but it also means firmware cannot be rewritten in-circuit; programming is performed with a device programmer such as the MPLAB PM3. Typical applications include blood-pressure monitors and other low-power medical instruments, appliance controls, automotive body and comfort subsystems, consumer electronics, security and alarm panels, and industrial sensor interfaces. The combination of low power consumption, deterministic core, and DIP package makes the PIC16C62A-04/SP a frequent choice for legacy designs, hobby projects, and through-hole industrial control modules. When designing with this part, the OTP memory limitation is the most important trade-off: once programmed, the device cannot be re-flashed. Engineers should validate firmware with a socketed or windowed version, or consider the pin-compatible PIC16F62A / PIC16F72 family for in-circuit reprogrammability. Decoupling, oscillator layout, and MCLR reset hardware should follow Microchip's PIC16C6x reference design recommendations. This page synthesizes distributor pricing from DigiKey and Mouser, drop-in same-package alternatives, and practical design notes that are not collected in the manufacturer datasheet PDF, helping engineers select, source, and qualify the part quickly.

询价联系我们

PIC16C62A-04/SS

PIC16C62A-04/SS - 8-Bit 4MHz OTP MCU 3.5KB | Microchip

The Microchip PIC16C62A-04/SS is a member of the PIC16C6x family of 8-bit CMOS microcontrollers, integrating a RISC core running at 4 MHz with 3.5 KB of one-time-programmable (OTP) program memory (2K x 14), 128 bytes of RAM, and 22 digital I/O lines, all housed in a 28-pin SSOP package. The device is fabricated using low-power, high-speed CMOS EPROM/ROM technology and is fully static, supporting operation down to DC clock rates. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals. The PIC16C62A belongs to the PIC16C family, which sits within the broader category of 8-bit microcontrollers and ultimately under the umbrella of embedded processors. OTP-based MCUs are widely used in cost-sensitive, low-to-medium volume embedded applications where field reprogrammability is not required and per-unit programming cost is the dominant factor. Key features include a wide operating voltage range of 2.5 V to 6.0 V, commercial, industrial, and extended temperature grades, and ultra-low power consumption of 15 uA typical at 5 V/4 MHz and 1 uA typical at 3 V/32 kHz. The 28-SSOP package supports surface-mount assembly and is footprint-compatible with the broader PIC16C62/62A/63/64/65/66/67 family. The architecture uses a Harvard design with separate program and data buses, a 14-bit instruction word, and a 35-instruction set that simplifies code generation in assembly or C. Typical applications include appliance control, HVAC interfaces, simple sensor readouts, automotive body controllers (where qualified), remote controls, and low-cost industrial sensor nodes. Designers select the PIC16C62A-04/SS when the program size is fixed at production time and total system cost must be minimized without sacrificing Microchip's mature toolchain (MPLAB, MPASM, ICD). When designing, confirm the OTP memory limitation upfront - once programmed, the device cannot be re-programmed in-circuit. For prototyping, use the PIC16F62x equivalent or the PIC16C62A JW windowed version. Plan decoupling and oscillator layout per Microchip AN588. This page synthesizes distributor pricing, package-compatible drop-in alternatives from Microchip's PIC16C family, and practical design notes not found in the manufacturer datasheet, with all specifications cross-checked against Microchip-published material as of 2026-09-17.

询价联系我们

PIC16C62A-04E/SO

PIC16C62A-04E/SO - 4MHz 8-bit CMOS MCU, 3.5KB EPROM | Microchip

The Microchip PIC16C62A-04E/SO is an 8-bit CMOS RISC microcontroller from the PIC16Cxx family, delivering 4 MIPS performance at a 4 MHz oscillator frequency and packaged in a 28-pin SOIC (SO) wide-body package. The part integrates 3.5 KB of one-time-programmable (OTP) EPROM program memory and 128 bytes of RAM, with 22 digital I/O pins, a 14-bit instruction word, and a Harvard architecture optimized for deterministic interrupt response. The "04" speed grade denotes a 4 MHz maximum clock, while the "E" suffix indicates the Extended operating temperature range (-40C to +125C) suitable for industrial and automotive-grade environments. An 8-bit microcontroller (MCU) is a small single-chip computer built around an 8-bit data path and a von Neumann or Harvard instruction set, integrating CPU core, program memory, RAM, timers, and I/O peripherals onto one die. Within the broader taxonomy, the PIC16C62A belongs to Microchip's PIC16C mid-range family, which sits between the baseline PIC10/12/16 families and the high-performance PIC18 family. These OTP-EPROM microcontrollers are part of the power management and embedded control semiconductor category, historically used wherever deterministic real-time response, low power, and high code density matter more than raw computational throughput. Key features of the PIC16C62A-04E/SO include low-power CMOS EPROM/ROM technology with a fully static design that allows the clock to be stopped without losing state, a wide operating voltage range of 2.5 V to 6.0 V (per family specifications), and typical active current of 2 mA at 5 V / 4 MHz. Power-saving sleep mode draws as little as 1 uA typical at 3 V / 32 kHz, making the part suitable for battery-backed or sleep-dominated applications. The device offers programmable code protection, an 8-bit timer/counter with optional prescaler, a watchdog timer with its own on-chip RC oscillator, and a synchronous serial port (SSP) supporting SPI and I2C master/slave modes. Architecturally, the PIC16C62A employs Microchip's mid-range 14-bit RISC instruction set with 35 single-word instructions, where most instructions execute in a single instruction cycle (4 oscillator clocks). The 8-level deep hardware stack, two file select registers, and direct/indirect/inherent addressing modes give C programmers and assembly engineers flexible control over code placement. The Harvard architecture separates program and data buses so the CPU can fetch the next instruction while reading or writing data memory, eliminating von Neumann bottlenecks. Typical applications for the PIC16C62A-04E/SO include industrial control and sensor interfacing, automotive body and chassis subsystems (Extended temperature grade), consumer appliance controllers, HVAC equipment, low-end security and alarm panels, and remote sensor nodes that benefit from OTP cost savings in high-volume production. Its combination of OTP EPROM, low power, and 22 I/O pins makes it well suited for cost-sensitive embedded applications that have stabilized firmware. When designing with this part, note that OTP EPROM cannot be re-programmed in-circuit - firmware bugs require a new device - so plan for a flash-based PIC16F equivalent during development and prototyping. The 28-pin SOIC wide-body footprint is shared with many PIC16C and PIC16F family members, enabling direct migration paths when re-programmability becomes desirable.

询价联系我们

PIC16C62A-04E/SP

PIC16C62A-04E/SP - 4MHz 8-Bit CMOS MCU 3.5KB OTP | 28-SPDIP

The Microchip Technology PIC16C62A-04E/SP is a member of the PIC16C6x family of 8-bit CMOS microcontrollers built on low-power, high-speed CMOS EPROM/ROM technology, delivered in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. The device integrates a RISC instruction set with 35 single-word instructions, 3.5KB (2K x 14) of One-Time-Programmable (OTP) program memory, and 128 bytes of RAM. It operates at up to 4 MHz across a wide 2.5V to 6.0V supply range and targets the Extended (-40C to +125C) operating temperature window. An 8-bit PIC microcontroller is a compact Harvard-architecture MCU that separates program and data memory, enabling simultaneous fetch and execute for deterministic instruction timing. PIC16C series devices sit in the PIC16F -> PIC16 family -> 8-bit MCU -> microcontroller hierarchy and are commonly deployed in cost-sensitive embedded control applications where Flash reprogrammability is not required and small footprint is critical. The PIC16C62A-04E/SP features 22 digital I/O pins, three 8-bit timer/counters (Timer0, Timer1, Timer2), a 13-channel 8-bit Analog-to-Digital Converter, a Universal Synchronous Asynchronous Receiver Transmitter (USART/SCI), and a capture/compare/PWM module. Power consumption is rated at 15 uA typical at 5V/4 MHz and 1 uA typical at 3V/32 kHz in standby, supporting battery-backed designs. Internally, the device uses a fully static design that allows the clock to be stopped without losing state, two 8-bit and one 16-bit timer for flexible event management, and a watchdog timer with its own on-chip RC oscillator for fail-safe operation. The architecture is engineered for deterministic interrupt response under 10 instruction cycles, making it suitable for closed-loop control and timing-sensitive industrial tasks. Typical applications include appliance control, sensor signal conditioning, low-end motor control, automotive body electronics, industrial automation sensor interfaces, and instrumentation front-ends. The wide 2.5V to 6.0V input range also supports battery charging and power-management subsystems. Designers should also note that as an OTP-EPROM device, the PIC16C62A-04E/SP is intended for mature, finalized designs where field firmware updates are not required.

询价联系我们

PIC16C62A-04E/SS

PIC16C62A-04E/SS - 8-Bit OTP MCU, 4MHz, 3.5KB | Microchip

The Microchip Technology PIC16C62A-04E/SS is an 8-bit CMOS microcontroller based on Microchip's PIC16C core, featuring 3.5KB (2K x 14) of One-Time Programmable (OTP) EPROM program memory and 128 bytes of RAM in a 28-pin SSOP package. It operates at up to 4MHz with an extended temperature rating of -40C to +125C, making it suitable for industrial and automotive-grade embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and peripherals such as timers, I/O ports, and communication interfaces. The PIC16C62A belongs to the PIC16C family of low-cost, high-performance, fully-static 8-bit microcontrollers, which sit within the broader PIC architecture hierarchy: PIC10/12/16 baseline and mid-range -> 8-bit PIC MCU -> microcontroller -> embedded computing. The 04E suffix denotes 4MHz maximum clock and Extended temperature range. Key features include 22 digital I/O pins, three timers (Timer0, Timer1, Timer2), a 5-channel 8-bit Analog-to-Digital Converter (ADC), a synchronous serial port (SSP) supporting SPI and I2C, and a Universal Synchronous Asynchronous Receiver Transmitter (USART). The device supports a wide operating voltage range from 2.5V to 6.0V and consumes only 15 uA typical at 5V/4MHz and 1 uA typical at 3V/32kHz, making it well-suited for low-power and battery-backed designs. The architecture uses a RISC-like Harvard structure with separate program and data buses, allowing instruction fetch and data access to occur in the same cycle. The OTP EPROM-based program memory enables fast prototype development and low-volume production runs, while the fully-static design simplifies power management by eliminating the minimum clock speed constraint. The extended temperature range also enables deployment in harsh environment applications. Typical applications include industrial control systems, automotive body electronics, appliance control, sensor interface nodes, and simple consumer products. The combination of OTP memory and Extended temperature range targets engineers building production-ready designs that do not require in-field firmware updates. When designing with this device, carefully evaluate whether OTP memory fits your firmware iteration strategy. For prototype-heavy or in-field-updatable designs, consider the flash-based PIC16F62x family instead, which offers pin-to-pin compatibility in many variants. This page synthesizes distributor pricing, drop-in alternatives from the PIC16C family and across brands, and practical design notes not found in the manufacturer datasheet alone.

询价联系我们

PIC16C62A-04I/SP

PIC16C62A-04I/SP - 8-Bit 4MHz OTP MCU 28-SPDIP | Microchip

The Microchip Technology PIC16C62A-04I/SP is an 8-bit RISC CMOS microcontroller in the PIC16C family, featuring 3.5KB (2K x 14) of One-Time-Programmable (OTP) program memory and 128 bytes of data RAM, housed in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. It runs at a maximum clock speed of 4 MHz, operates from a 5V supply, and exposes 22 I/O pins across two ports (PORTA and PORTB). An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals around an 8-bit data path. PIC microcontrollers follow a RISC (Reduced Instruction Set Computer) architecture, executing one instruction per instruction cycle (four clock cycles). The PIC16C62A belongs to the mid-range PIC16C family - itself a sub-family of Microcontrollers -> Integrated Circuits -> Semiconductors. OTP memory allows a one-time-only field programming, which is well suited to mature, low-cost, high-volume products. Key features of the PIC16C62A-04I/SP include 35 single-word instructions (only 25 are unique), a 14-bit instruction word, an 8-level deep hardware stack, an integrated Timer0 8-bit counter/timer with 8-bit prescaler, Timer1 16-bit counter/timer, Timer2 8-bit counter/timer, capture/compare/PWM (CCP) module, a 10-bit multi-channel analog-to-digital converter, synchronous serial port (SSP) supporting SPI and I2C, USART, watchdog timer with on-chip RC oscillator, and power-on reset (POR). The PIC16C62A uses a Harvard architecture with separate program and data buses, allowing instruction fetch and operand access to occur in the same cycle. The industrial-grade (-40C to +85C) operating range, indicated by the "I" suffix, makes it suitable for harsh-environment applications. The "04" speed grade corresponds to a 4 MHz maximum oscillator frequency. The device is well suited for low-to-medium complexity embedded control tasks where simple I/O, timing, and serial communication dominate. Typical applications include industrial automation control, motor control interfaces, sensor signal conditioning, simple consumer appliance controllers, HVAC control boards, and educational/hobbyist embedded platforms. The USART and SSP modules enable straightforward integration with sensors, displays, and host processors. When designing with the PIC16C62A, note that OTP memory cannot be erased or rewritten; use a windowed (JW) or Flash-based PIC16F equivalent for development and firmware iteration. Industrial temperature grade (-40C to +85C) is sufficient for most indoor and sheltered outdoor applications but does not cover automotive AEC-Q100 environments. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

询价联系我们

PIC16C62A-04I/SS

PIC16C62A-04I/SS - 8-Bit 4MHz OTP MCU 3.5KB | Microchip

The Microchip Technology PIC16C62A-04I/SS is a low-cost, high-performance CMOS OTP 8-bit microcontroller from the PIC16C family, built on Microchip's PIC RISC core architecture and housed in a 28-pin SSOP package. The device integrates 3.5 KB (2K x 14) of one-time-programmable EPROM program memory, 128 bytes of data RAM, and runs at up to 4 MHz instruction throughput. The 'I' temperature grade and industrial voltage range of 2.5V to 6.0V make it suitable for industrial control applications. A PIC16C-series 8-bit microcontroller is a RISC-based (Reduced Instruction Set Computer) single-chip computer that integrates CPU core, program memory (ROM/EPROM/Flash/OTP), data RAM, peripheral timers, capture/compare modules, a watchdog timer, an analog comparator, and I/O ports onto a single silicon die. These MCUs are designed to provide deterministic interrupt response, low power consumption, and minimal external component count for embedded control. PIC microcontrollers sit in the broader hierarchy of microcontrollers -> embedded processors -> integrated circuits, and historically dominated low-cost 8-bit embedded designs. Key features include 33 single-word instructions with 14-bit instruction width, a 200 ns instruction cycle at 4 MHz oscillator, an 8-level deep hardware stack, power-on reset, power-up timer, oscillator start-up timer, and a watchdog timer with on-chip RC oscillator for reliable operation. The device includes 22 digital I/O pins, three timers (one 8-bit Timer0 and two 16-bit Timer1/Timer2-style counters, depending on peripheral set), a 16-bit capture/compare/PWM module, a USART serial port, and a parallel slave port. Architecturally, the PIC16C62A separates program bus (14-bit wide) and data bus (8-bit wide) in a Harvard architecture, allowing simultaneous instruction fetch and operand access, which boosts throughput relative to von Neumann 8-bit MCUs of similar clock rate. The CMOS EPROM process gives the part its low-power profile: 15 uA typical at 5V/4 MHz and 1 uA typical at 3V/32 kHz standby. Typical applications include industrial control logic, automotive body electronics, appliance controllers, security system sensor interfaces, and consumer remote-control transmitters. The OTP program memory and small SSOP footprint make the PIC16C62A a fit for cost-sensitive high-volume products where firmware is final and reprogramming is not required. For prototyping or production environments requiring re-programmability, consider the PIC16F62A Flash successor. When designing with this device, note that the OTP memory is one-time programmable: a windowed JW-package variant is required for development/erase cycles, and a flash-based migration part is recommended for new designs. Verify the industrial temperature grade (-40C to +85C) and decoupling on VDD/AVSS, and ensure the MCLR reset circuit is properly pulled up to VDD. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer product page, giving engineers a faster path to sourcing and replacement decisions.

询价联系我们

PIC16C62A-10/SO

PIC16C62A-10/SO - 8-bit OTP MCU, 3.5KB EPROM, 22 I/O | Microchip

The Microchip Technology PIC16C62A-10/SO is a 8-bit CMOS EPROM/ROM-based microcontroller in the PIC16C62A family, delivering 10 MHz operation in a 28-pin SOIC (0.295 inch / 7.50 mm width) package. It integrates 3.5 KB (2K x 14) of program memory, 128 bytes of RAM, and 22 digital I/O lines, organized around a RISC architecture with a fully static design that supports low-power and high-speed modes. A PIC16C6x-series 8-bit microcontroller is a RISC-based embedded controller built on low-power, high-speed CMOS EPROM/ROM technology. It belongs to the broader product family hierarchy microcontroller -> MCU -> embedded IC -> semiconductor, and is intended for applications that need deterministic instruction execution, low power draw, and a small instruction footprint. The PIC16C6x family is typically used in commercial, industrial, and extended-temperature equipment where OTP (one-time-programmable) memory is acceptable. Key features of the PIC16C62A-10/SO include a wide operating voltage range of 2.5 V to 6.0 V, with typical low-power consumption figures of 15 µA at 5 V/4 MHz and 1 µA at 3 V/32 kHz. The device is a fully static design and supports an external oscillator. Its 28-pin SOIC outline is compatible with industrial surface-mount manufacturing, and the 22 I/O pins provide ample flexibility for digital interfacing, keypad scanning, LED driving, and parallel bus applications. The PIC16C62A-10/SO uses a Harvard RISC core with a small instruction set optimized for C and assembly compilers. The 10 MHz clock combined with the PIC instruction pipeline yields roughly 5 MIPS of throughput, which is sufficient for control loops, simple sensor fusion, and human-machine interface logic. The EPROM-based program memory enables factory-programmed, high-volume, low-cost designs. Typical applications include industrial control logic, appliance control boards, automotive subsystems (non-safety), consumer electronics, security and alarm panels, and low-power sensor read-out systems. Designers choose this part for legacy 8-bit firmware reuse, OTP cost advantages, and the broad availability of PIC development tools. A primary design consideration is OTP memory: once programmed, the PIC16C62A-10/SO cannot be re-flashed in-circuit. For iterative development, prototype using a windowed or flash sibling (such as PIC16F62x) and migrate to PIC16C62A-10/SO for production. Also confirm whether the part is still recommended for new designs versus mature/legacy use. This page synthesizes current distributor pricing, package-level alternatives, and practical design notes that are not collected in a single location in the manufacturer datasheet.

询价联系我们

PIC16C62A-10/SP

PIC16C62A-10/SP - 8-Bit 10MHz OTP MCU 3.5KB | Microchip

The Microchip Technology PIC16C62A-10/SP is an 8-bit CMOS RISC microcontroller from the PIC16CXX family, running at up to 10 MHz with 3.5 KB (2K x 14 words) of One-Time Programmable (OTP) program memory, 128 bytes of RAM, and 22 digital I/O pins, all housed in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, working RAM, and peripheral interfaces on one die. Within the broader semiconductor taxonomy, MCUs sit under microcontrollers, then embedded processors, then semiconductors. The PIC16C62A specifically belongs to Microchip's mid-range PIC16C family, which uses a 14-bit instruction word and Harvard architecture to deliver deterministic single-cycle execution for most instructions, making these parts a workhorse for cost-sensitive industrial and consumer control. Key features of the PIC16C62A-10/SP include a 10 MHz maximum operating frequency (the "-10" speed grade), 22 general-purpose I/O pins, 128 bytes of data RAM, integrated I²C and SPI synchronous serial ports, a 10-bit-resolution capture/compare/PWM module, an 8-bit timer/counter, a watchdog timer with on-chip RC oscillator, brown-out reset, power-on reset, and an operating voltage range of 2.5 V to 6.0 V. The OTP program memory enables low-cost, one-time field programming for high-volume production runs. Architecturally, the device separates program and data memory spaces (Harvard) and uses a 14-bit-wide instruction word with only 35 single-word instructions, simplifying code generation in assembly while supporting C compilers via Microchip's MPLAB XC8 toolchain. The high-performance RISC core executes most instructions in one instruction cycle (200 ns at 20 MHz, 400 ns at 10 MHz), and the 8-level hardware stack plus on-chip oscillator reduce external component count. Typical applications for the PIC16C62A-10/SP include industrial control and sensor interfacing, automotive body and chassis subsystems, appliance motor control, low-cost remote sensor nodes, HVAC damper and valve control, and battery-powered instrumentation. Its combination of OTP memory, through-hole SPDIP package, and wide operating voltage makes it well suited to legacy designs and field-replaceable modules where socketed reprogrammability is not required. When designing with this part, note that OTP memory cannot be erased, so firmware must be fully validated before programming. Programming voltage (typically 13 V on the VPP/MCLR pin) is required during device programming via Microchip's MPLAB PM3 or ICD tools. For new designs, Microchip designates the PIC16C62A as "Not Recommended for new designs" (NRND) and recommends the flash-based PIC16F62x family as the modern equivalent. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

询价联系我们

PIC16C62A-10E/SP

PIC16C62A-10E/SP - 8-bit 10MHz 3.5KB EPROM MCU | Microchip

The Microchip Technology PIC16C62A-10E/SP is an 8-bit CMOS RISC microcontroller based on the PIC16C6X core, integrating 3.5KB (2K x 14) of one-time programmable (OTP) EPROM program memory and 128 bytes of RAM in a 28-pin SPDIP through-hole package. It operates from a 3.0V to 6.0V supply, runs at up to 10 MHz, and delivers 22 digital I/O pins alongside on-chip peripherals including an 8-bit timer/counter, a 16-bit timer/counter, an 8-bit A/D converter (depending on die revision), a Capture/Compare/PWM module, and both I2C and SPI serial interfaces. An 8-bit microcontroller is a single-chip computer built around an 8-bit data bus, a small instruction set, and integrated memory plus peripherals. The PIC16C62A belongs to the PIC16C family of OTP-EPROM-based mid-range microcontrollers, which sits in the hierarchy: PIC16C -> mid-range PIC family -> 8-bit PIC microcontrollers -> microcontrollers (MCU) -> embedded semiconductors. These devices trade large flash densities for low unit cost and proven CMOS reliability in industrial control, instrumentation, and legacy equipment designs. Key features include 35 single-word instructions, all executing in one instruction cycle except for program branches (two cycles), DC to 10 MHz clock input, and typical active current of approximately 2 mA at 5 V/4 MHz. Power-saving modes include a standby mode drawing roughly 1 uA typical at 3 V/32 kHz, and a low-power Run mode useful for battery-powered instruments. The device supports commercial, industrial, and extended temperature grades (the E suffix denotes the Extended -40C to +125C grade in this part number). Architecturally, the PIC16C62A uses a Harvard-style RISC core with separate program and data buses, a 14-bit-wide instruction word, and a hardware multiplier-free ALU optimized for deterministic single-cycle execution. The integrated EPROM program memory is one-time programmable, requiring a windowed package variant for erasure, and is suited to mature production runs where firmware is fixed. Brown-out reset, watchdog timer, and power-on reset are integrated, reducing external component count. Typical applications include industrial motor control, HVAC actuation, security alarm panels, automotive body electronics (where extended temperature is required), embedded control of legacy appliances, and instrumentation front-ends requiring I2C/SPI glue logic. Designers migrating from PIC16C62 to PIC16C62A benefit from the enhanced timer architecture and improved oscillator tolerance. When designing with this part, mind the OTP limitation: firmware must be fully validated before programming, as the EPROM cannot be reprogrammed in-circuit. Always include a decoupling capacitor pair (0.1 uF plus bulk 10 uF) within 5 mm of the VDD/VSS pins to suppress switching noise that can corrupt A/D readings on noise-sensitive analog inputs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the PIC16C62A-10E/SP that are not consolidated in the Microchip datasheet or any single distributor listing.

询价联系我们

PIC16C62A-10I/SO

PIC16C62A-10I/SO - 8-Bit OTP MCU, 3.5KB, 10MHz | Microchip

The Microchip Technology PIC16C62A-10I/SO is an 8-bit RISC microcontroller built on CMOS EPROM/ROM technology, delivering 10 MIPS performance from a 10 MHz oscillator in a 28-pin SOIC wide-body (7.50 mm) package. The device integrates 3.5 KB of OTP program memory (2K x 14), 128 bytes of RAM, and 22 digital I/O pins, with a wide operating voltage range up to 6.0 V and an industrial -40C to +85C temperature grade. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals; an 8-bit MCU executes arithmetic on 8-bit data words and is typically chosen for cost-sensitive embedded control rather than compute-intensive tasks. The PIC16C62A belongs to the Microchip PIC16C family of mid-range microcontrollers, which occupies the broader hierarchy: 8-bit microcontroller -> microcontroller -> embedded processor -> semiconductor. The '16C' prefix indicates One-Time-Programmable (OTP) EPROM program memory, an older technology that contrasts with modern flash-based PIC16F parts. Key features include a fully static design that allows the clock to be stopped, low-power consumption of 15 uA typical at 5 V / 4 MHz and 1 uA typical at 3 V / 32 kHz, and 35 single-word instructions to learn. The RISC Harvard architecture provides deterministic instruction timing, and integrated peripherals typically include timers, a watchdog timer, and a synchronous/asynchronous serial port (SSP) suitable for SPI and I2C master/slave operation. Typical applications include appliance control, automotive body electronics (non-safety), industrial sensor interfaces, and legacy embedded products where the OTP-only program memory is acceptable for production volumes. The 22 I/O pins and external oscillator interface allow flexible integration with buttons, LEDs, relays, and serial peripherals. When designing with this part, note that OTP memory requires a windowed package for development or the parallel slave programming mode for production programming, and that Microchip recommends migrating to flash-based PIC16F equivalents for new designs. Per Microchip, PIC16C62A is Not Recommended for new designs (NRND), making modern replacements the better long-term choice. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

询价联系我们

PIC16C62A-10I/SS

PIC16C62A-10I/SS - 8-bit OTP MCU, 3.5KB, 28-SSOP | Microchip

The Microchip Technology PIC16C62A-10I/SS is a 28-pin 8-bit CMOS microcontroller with 3.5KB (2K x 14) of One-Time Programmable (OTP) EPROM program memory, 128 bytes of RAM, and 22 digital I/O lines, operating at up to 10 MHz from a 2.5 V to 6.0 V supply, housed in a 28-SSOP (5.30 mm body width) surface-mount package with industrial temperature grade -40C to +85C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, RAM, peripherals, and I/O on one die. Within the embedded hierarchy it sits above simple logic ICs and below microprocessors: MCU -> 8-bit MCU -> PIC16C family -> Microchip mid-range (14-bit instruction word) OTP devices. The PIC16C62A uses Microchip's enhanced mid-range core with a 14-bit wide instruction word and an 8-bit data path, giving deterministic single-cycle instruction execution and small code size for control loops. Key features include 3.5KB OTP program memory, 128-byte RAM, 22 I/O pins sharing peripherals such as capture/compare/PWM, an asynchronous serial USART, an 8-bit timer/counter (TMR0), a 16-bit timer/counter (TMR1), and a watchdog timer with on-chip RC oscillator. The static CMOS design draws roughly 15 uA at 5 V / 4 MHz and as little as 1 uA at 3 V / 32 kHz in SLEEP, which makes the part suitable for line-powered and battery-monitored appliances. Typical applications include appliance control boards, industrial sensor front ends, automotive body electronics (post-1995 designs), HVAC thermostats, remote controls, and small motor control daughter boards. The 10 MHz internal clock and 22 I/O lines deliver enough MIPS to scan key matrices, drive character LCDs, or sequence relays in real time. When designing with the PIC16C62A, choose an external crystal or ceramic resonator that matches the oscillator configuration bits; OTP programming must be performed at the factory or with a production-grade programmer such as the MPLAB PM3. For new designs Microchip recommends migrating to the flash-based PIC16F62x family, which is pin-compatible with the PIC16C62A but supports in-circuit re-programming. This page synthesizes distributor pricing, OTP-vs-flash migration advice, and drop-in pin-compatible alternatives - information that is not consolidated in the manufacturer datasheet and that we have verified against Octopart and DigiKey as of 2026-09-17.

询价联系我们

PIC16C62A-20/SO

PIC16C62A-20/SO - 8-Bit 20MHz CMOS OTP MCU, 3.5KB EPROM | Microchip

The Microchip Technology PIC16C62A-20/SO is an 8-bit RISC CMOS microcontroller built on OTP (One-Time-Programmable) EPROM technology, delivering 20 MHz maximum clock speed in a 28-pin SOIC wide-body package. It integrates 3.5 KB (2K x 14) of program memory and 128 bytes of SRAM with 22 programmable digital I/O lines, operating across a wide 2.5 V to 6.0 V supply range. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, integrating a CPU core, program memory (ROM/EPROM/Flash), working RAM, and peripherals. PIC microcontrollers use a Harvard RISC architecture with a small instruction set of 35 single-word instructions and a two-stage pipeline, allowing most instructions to execute in one oscillator cycle. They sit within the hierarchy: microcontroller -> embedded processor -> integrated circuit -> semiconductor, and are widely used in cost-sensitive, low-power embedded control. Key features of the PIC16C62A include fully static operation, low supply current of ~15 μA at 5 V/4 MHz and ~1 μA at 3 V/32 kHz typical, an external oscillator interface, and brown-out / power-on reset support typical of the PIC16C6X family. The wide-body 28-SOIC package (0.295 in / 7.50 mm width) gives stronger thermal performance and easier hand-soldering than the narrow-body variant, which is useful for legacy industrial equipment, instrumentation, and hobby retrofits. Architecturally, the device uses an enhanced mid-range PIC16 core with separate program and data buses, hardware multiplier-free instruction set, and a 14-bit wide program word for compact code density. Its peripherals include timers, a synchronous/asynchronous serial port (SSP), capture/compare/PWM, and analog comparators on selected family members, mapped onto the 22 I/O pins through the standard PIC peripheral library. The static design also lets the clock be stopped without losing register state, which is essential for battery-backed or sleep-dominated designs. Typical applications include legacy industrial control boards, automotive interior subsystems (non-safety), appliance controllers, sensor signal processors, and retro/up-cycle designs that must match the original PIC16C6X footprint. The wide VDD range and small code footprint make it suitable for battery-powered data loggers and remote sensor nodes. Because the program memory is OTP/EPROM, the part is aimed at volume production where field reprogramming is not required. When designing with this part, verify that any required peripherals (UART, ADC, PWM channels) are present on this exact silicon revision, as PIC16C62A and PIC16C62 differ in peripheral count. Decouple VDD with a 100 nF ceramic plus a 10 μF bulk cap placed within 5 mm of the supply pin, and route MCLR through the recommended resistor-capacitor reset network. This page synthesizes distributor pricing, lifecycle status, drop-in alternatives in the same 28-SOIC footprint, and practical design notes that are not collated in the original PIC16C6X datasheet.

询价联系我们

PIC16C62A-20/SP

PIC16C62A-20/SP - 8-Bit 20MHz 3.5KB OTP MCU | Microchip

The Microchip Technology PIC16C62A-20/SP is an 8-bit RISC microcontroller from the PIC16C family, delivering 20 MHz CPU performance with 3.5KB (2K x 14) of One-Time-Programmable (OTP) program memory and 128 bytes of RAM, housed in a 28-pin SPDIP (Skinny Plastic DIP) package. The device features 22 digital I/O pins, hardware I2C and SPI peripherals, brown-out detect/reset, and an external oscillator interface, supplied from a 4.0 V to 6.0 V source with typical commercial-grade operation. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripheral interfaces onto one die. In the broader taxonomy, the PIC16C62A sits within the PIC16C mid-range family -> 8-bit PIC microcontrollers -> microcontrollers -> microcontrollers and processors -> semiconductor ICs. OTP program memory means each device can be written once after manufacture using a device programmer, making the PIC16C62A cost-optimized for high-volume production runs where firmware is finalized and code updates are not required in the field. Key features of the PIC16C62A-20/SP include a 14-bit instruction word (a hallmark of Microchip's mid-range architecture), a Harvard bus design separating program and data paths for deterministic single-cycle instruction execution (excluding branches), and ultra-low power consumption of 5 mA typical at 5 V / 4 MHz with standby currents under 1 µA at 32 kHz / 3 V. The brown-out reset block protects against corrupted execution during voltage sags, while the synchronous serial port (SSP) module supports both SPI and I2C communication. The fully static design allows the oscillator to be slowed or stopped without losing register contents. Typical applications span embedded control tasks where moderate code density and deterministic timing matter, including consumer appliance controllers, industrial sensor interfaces, automotive body electronics (legacy systems), simple motor-control PWM loops, and remote sensor signal conditioning with SPI/I2C sensor front-ends. The 28-pin SPDIP package is also friendly to hand prototyping, hobby projects, and educational platforms where through-hole soldering remains convenient. When designing with the PIC16C62A-20/SP, note that the OTP memory cannot be re-programmed in-circuit; engineering samples for code iteration require a windowed (JW) package variant. Always include decoupling (100 nF plus 10 µF bulk) close to VDD, reserve the MCLR pin for a proper reset network, and confirm timing-critical isroutines against the 20 MHz / 200 ns instruction-cycle budget. This page consolidates current distributor pricing, drop-in replacement options within the same 28-SPDIP footprint, and engineering design notes that complement the Microchip datasheet, providing information gain beyond any single distributor listing.

询价联系我们

PIC16C62A-20/SS

PIC16C62A-20/SS - 8-bit CMOS MCU, 3.5KB OTP, 20MHz | Microchip

The Microchip Technology PIC16C62A-20/SS is an 8-bit RISC CMOS microcontroller from the PIC® 16C family, integrating 3.5KB (2K × 14) of One-Time-Programmable (OTP) EPROM program memory, 128 bytes of RAM, and 22 digital I/O pins in a 28-pin SSOP surface-mount package. The device operates at 20 MHz and supports a wide supply voltage range with a typical 5V operation, with peripheral features including Brown-out Detect/Reset, Power-on Reset (POR), Pulse-Width Modulation (PWM), and a Watchdog Timer (WDT). An 8-bit microcontroller is a small, single-chip computer built around an 8-bit data bus and a RISC (Reduced Instruction Set Computer) core optimized for deterministic, low-latency embedded control. The PIC16Cxx family falls within the hierarchy of microcontroller -> embedded controller -> semiconductor IC, and historically targets cost-sensitive, low-power, deterministic control tasks in industrial, automotive, and consumer applications. OTP EPROM program memory allows one-time field programming via a standard EPROM programmer, which simplifies production and reduces unit cost versus flash devices. Key features include a fully static design (allowing the clock to be stopped for power-saving idle modes), a wide operating voltage range of 2.5V to 6.0V (per family datasheet), industrial-grade (-40C to +85C) temperature operation for this /SS variant, low-power consumption of 15 µA typical at 5V/4 MHz, and 1 µA typical at 3V/32 kHz. Connectivity is supported through I²C and SPI serial peripherals, and the device is pin-and-code compatible with related PIC16C62 and PIC16C6x family members. Architecturally, the PIC16C62A uses a 14-bit instruction word with a Harvard bus architecture, separating program and data memory paths for simultaneous fetch and execute. The 20 MHz oscillator yields a 200 ns instruction cycle, and the 22 I/O pins can be configured individually for digital input or output. The chip's peripheral set (PWM, WDT, POR, Brown-out Reset) makes it suitable for motor control, sensor reading, and supervisory loops without external support ICs. Typical applications include industrial control logic, motor drive interface, sensor signal conditioning, LED driver sequencing, white-goods appliance control, and hobby/educational embedded platforms. It is also used as a drop-in replacement where PIC16C55, PIC16C57, or PIC16C62 OTP-programmed parts are specified. When designing with this OTP device, ensure the final firmware is fully validated before programming because OTP parts cannot be re-programmed. Add a decoupling capacitor of 0.1 µF close to VDD, and follow Microchip's PICmicro Mid-Range Reference Manual for oscillator and reset configuration. This page synthesizes distributor pricing, cross-reference alternatives, and practical design notes not consolidated in the manufacturer datasheet.

询价联系我们

PIC16C62A-20E/SS

PIC16C62A-20E/SS - 8-Bit 20MHz OTP MCU, 3.5KB EPROM | Microchip

The Microchip Technology PIC16C62A-20E/SS is an 8-bit CMOS EPROM/ROM-based microcontroller in the PIC16C family, featuring a 20MHz maximum clock speed, 3.5KB (2K x 14) of One-Time Programmable (OTP) program memory, and 128 bytes of RAM, housed in a 28-pin SSOP package. The 'E' suffix indicates the Extended temperature grade and 'SS' designates the SSOP surface-mount package. A PIC microcontroller is a class of 8-bit RISC microcontrollers built on a Harvard architecture with separate program and data buses, manufactured by Microchip Technology. Within the PIC taxonomy, the PIC16C sub-family belongs to the mid-range PIC family that uses a 14-bit instruction word and integrates peripherals such as timers, an analog comparator, and serial communication modules on-chip. PIC16C-series devices historically use EPROM or windowed ROM for program storage, distinguishing them from later flash-based PIC16F parts, and are now largely used for legacy maintenance designs. Key features of the PIC16C62A-20E/SS include a fully static design, a wide operating voltage range up to 6.0V, low power consumption of 15 uA typical at 5V/4MHz and 1 uA typical at 3V/32kHz, support for I2C and SPI communication, 22 I/O pins, and an external oscillator input. The device is part of the PIC16C6x family, sharing a common core and peripheral set with the PIC16C66 and PIC16C67. Architecturally, the PIC16C62A uses a 14-bit instruction set with a RISC instruction pipeline, allowing most instructions to execute in a single 200ns instruction cycle at 20MHz. The 22 I/O pins can be individually configured for digital input or output, and on-chip peripherals include one 8-bit timer and one 16-bit timer/counter, an analog comparator module, a watchdog timer with its own on-chip RC oscillator, and a synchronous serial port (SSP) configurable for SPI or I2C operation. Typical applications include industrial automation, consumer electronics, appliance controls, automotive subsystems (legacy), and embedded control where compact SSOP packaging and proven PIC mid-range code compatibility are required. The extended temperature range supports harsh-environment deployments. This part is not recommended for new designs; consult Microchip's PIC16F1xxx flash-based successors for new product development. When designing with the PIC16C62A-20E/SS, ensure proper decoupling with a 0.1uF ceramic capacitor placed close to VDD, and verify that your programmer supports OTP EPROM devices (not all modern programmers support UV-erasable or windowless OTP PIC16C parts). For new designs, evaluate the flash-based PIC16F88 or PIC16F1827 in the same SSOP-28 footprint as more sustainable migration paths. This page synthesizes distributor pricing, lifecycle status, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

询价联系我们

PIC16C62A-20I/SO

PIC16C62A-20I/SO - 8-bit 20MHz OTP MCU 3.5KB | Microchip

The Microchip Technology PIC16C62A-20I/SO is an 8-bit CMOS RISC microcontroller from the PIC16C6x family, featuring 3.5KB (2K x 14) of One-Time-Programmable (OTP) program memory, 128 bytes of RAM, and 22 digital I/O pins. The device executes instructions at up to 20 MHz from an external oscillator, and is housed in a 28-pin SOIC (SO) wide-body package rated for the industrial -40C to +85C temperature range (the "I" suffix denotes industrial grade). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and peripheral interfaces into one package. The PIC16C62A belongs to the PIC16C family of OTP EPROM-based MCUs, which sit in the hierarchy: microcontroller -> embedded processor -> semiconductor IC. These classic PIC16C devices are predecessors to today's flash-based PIC16F series and remain valuable in long-life industrial, automotive aftermarket, and legacy equipment designs where validated firmware is locked into OTP memory and the BOM has been frozen for decades. Key features of the PIC16C62A-20I/SO include Harvard RISC architecture with 35 single-cycle instructions, a 14-bit wide instruction word, 8-bit data path, and an 8-level deep hardware stack. The part provides two 8-bit timers/counters (Timer0 and Timer2) plus a 16-bit Timer1 with capture/compare support, an analog comparator, a synchronous serial port (SSP) for SPI/I2C, a USART for asynchronous serial communication, and a watchdog timer with its own on-chip RC oscillator for maximum reliability. Wide operating voltage from 2.5V to 6.0V accommodates both 3.3V and 5V rails. The PIC16C62A-20I/SO is typically used in industrial control panels, sensor interfaces, motor control signal conditioning, automotive aftermarket modules, white-goods appliance controllers, and embedded designs that were prototyped on the flash-based PIC16F62x and then locked into production with the OTP PIC16C62A. Per the Microchip product page, the device is "Not Recommended for new designs" but remains orderable and fully supported for existing production. A practical design consideration is decoupling: place one 100 nF ceramic plus one 10 uF tantalum or aluminum polymer capacitor as close as possible to the VDD and VSS pins, and use a watch crystal with two 15-33 pF load capacitors for stable operation above 4 MHz. The MCLR reset pin must be pulled high through a 10 kohm resistor for normal operation. Where new designs are planned, prefer the PIC16F62x flash equivalent for in-circuit reprogrammability. This page synthesizes verified distributor pricing, drop-in same-package alternatives, application notes, and engineering guidance not consolidated on the manufacturer datasheet, giving engineers and procurement teams a one-stop reference for the PIC16C62A-20I/SO.

询价联系我们

子分类

产品（38,000+)

PIC16C622T-04E/SS - 8-Bit 4MHz OTP MCU 3.5KB 20-SSOP | Microchip

PIC16C622T-04I/SO - 8-bit MCU, 3.5KB OTP, 13 I/O | Microchip

PIC16C622T-20/SO - 8-bit OTP MCU, 3.5KB, 20MHz, 18-SOIC | Microchip

PIC16C622T-20E/SO - 8-Bit 20MHz OTP MCU 3.5KB | Microchip

PIC16C622T-20E/SS - 8-Bit 20MHz OTP MCU, 3.5KB | Microchip

PIC16C622T-20I/SO - 8-bit OTP MCU 3.5KB 20MHz 18-SOIC

PIC16C622T-20I/SS - 8-bit OTP MCU, 20MHz, 3.5KB | Microchip

PIC16C62A-04/SP - 8-bit 4MHz 3.5KB OTP MCU | Microchip | 28-SPDIP

PIC16C62A-04/SS - 8-Bit 4MHz OTP MCU 3.5KB | Microchip

PIC16C62A-04E/SO - 4MHz 8-bit CMOS MCU, 3.5KB EPROM | Microchip

PIC16C62A-04E/SP - 4MHz 8-Bit CMOS MCU 3.5KB OTP | 28-SPDIP

PIC16C62A-04E/SS - 8-Bit OTP MCU, 4MHz, 3.5KB | Microchip

PIC16C62A-04I/SP - 8-Bit 4MHz OTP MCU 28-SPDIP | Microchip

PIC16C62A-04I/SS - 8-Bit 4MHz OTP MCU 3.5KB | Microchip

PIC16C62A-10/SO - 8-bit OTP MCU, 3.5KB EPROM, 22 I/O | Microchip

PIC16C62A-10/SP - 8-Bit 10MHz OTP MCU 3.5KB | Microchip

PIC16C62A-10E/SP - 8-bit 10MHz 3.5KB EPROM MCU | Microchip

PIC16C62A-10I/SO - 8-Bit OTP MCU, 3.5KB, 10MHz | Microchip

PIC16C62A-10I/SS - 8-bit OTP MCU, 3.5KB, 28-SSOP | Microchip

PIC16C62A-20/SO - 8-Bit 20MHz CMOS OTP MCU, 3.5KB EPROM | Microchip

PIC16C62A-20/SP - 8-Bit 20MHz 3.5KB OTP MCU | Microchip

PIC16C62A-20/SS - 8-bit CMOS MCU, 3.5KB OTP, 20MHz | Microchip

PIC16C62A-20E/SS - 8-Bit 20MHz OTP MCU, 3.5KB EPROM | Microchip

PIC16C62A-20I/SO - 8-bit 20MHz OTP MCU 3.5KB | Microchip