P1020NXE2FFB - QorIQ P1 Dual-Core 800MHz SoC | NXP
料号： P1020NXE2FFB ⚠ 最后一次采购| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $89.5 | $89.50 |
| 10 | $82.1 | $821.00 |
| 100 | $71.45 | $7,145.00 |
| 500 | $62.8 | $31,400.00 |
| 1,000 | $54.95 | $54,950.00 |
P1020NXE2FFB 概述
A microprocessor (MPU) is an integrated circuit that contains one or more central processing units, cache, memory controllers, and peripheral interfaces on a single die. Within the broader taxonomy, an MPU is a sub-class of microcontroller/microprocessor IC, which itself sits under Integrated Circuits > Microprocessors. The QorIQ P1 family, derived from the PowerQUICC lineage, represents NXP's value-tier communications processors used in wired and wireless access, industrial control, and printing/imaging platforms.
Key features include dual e500v2 cores with 36-bit physical addressing, integrated SEC 4.0 security engine for IPSec/SSL acceleration, three Gigabit Ethernet interfaces (two SGMII plus one RGMII), two PCIe Gen 1 controllers, a USB 2.0 controller with ULPI interface, DDR2/DDR3 memory controller with ECC, and four TDM channels. The device operates from -40C to +125C junction temperature, making it suitable for extended-temperature industrial and outdoor networking equipment.
Architecturally, the P1020NXE2FFB employs the e500v2 core with double-precision FPU, 32KB I/D L1 cache per core, and a unified 256KB L2 cache. The platform uses a CoreNet fabric for on-chip interconnect, a separate MAPLE-B2 acceleration engine for print/imaging offload, and the SEC 4.0 hardware crypto block supporting DES, 3DES, AES, ARC4, RSA, ECC, and MD5/SHA-1/SHA-2 hashes.
Typical applications include multi-service routers, DSLAM line cards, industrial gateways, network-attached storage controllers, multi-function printer controllers, and Smart Energy/Grid communication nodes. The combination of dual-core processing and hardware cryptography makes it ideal for VPN/SSL termination at the network edge.
When designing with the P1020NXE2FFB, ensure the DDR3 interface is terminated per JEDEC recommendations and that the core voltage rails (0.9V/1.0V, 1.5V, 3.3V) are sequenced according to the power-up requirements. Heat dissipation at 800 MHz is moderate but the 31x31 mm BGA still requires thermal vias and adequate PCB copper for sustained 125C operation.
直接替换替代料： P1020NXE2FFB ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： P1020NXE2FFB （相同外形与封装尺寸） ——差异在于 Operating Temperature, USB, Memory Controller, Process Technology, RoHS Status.
快速对比工具——选择替代料号进行并排对比：
P1020NXE2HFB
✅ 直接替换📋 参考替代料（不在目录中）
P1010NXE2HFB
✅ 直接替换📋 参考替代料（不在目录中）
P1011NSN2HFB
✅ 直接替换📋 参考替代料（不在目录中）
P2020NXE2HFB
✅ 直接替换📋 参考替代料（不在目录中）
P1020NSE2HFB
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
P1014NXE2HFB
✅ 直接替换📋 参考替代料（不在目录中）
P1020NXE2FFB 最大额定值与电气特性
| Architecture | Power Architecture e500v2 |
| Core Configuration | Dual-core (2 cores), 32-bit |
| Maximum Core Frequency | 800 MHz |
| L1 Cache (per core) | 32 KB instruction + 32 KB data |
| L2 Cache | 256 KB unified |
| Security Engine | SEC 4.0 (DES/3DES/AES/RSA/ECC/SHA) |
| Ethernet Interfaces | 3x Gigabit (2x SGMII + 1x RGMII) |
| Memory Controller | DDR2/DDR3 with ECC |
| PCIe Controllers | 2x PCIe Gen 1 |
| USB | 1x USB 2.0 with ULPI |
| TDM | 4 channels |
| 封装 | 689-TEPBGA II (31x31 mm) |
| 工作温度 | -40C to +125C (junction) |
| RoHS 状态 | RoHS Compliant |
| Lead-Free Status | Lead Free |
| 安装类型 | Surface Mount (BGA) |
| Qualification | Not Qualified (industrial grade) |
P1020NXE2FFB 689-tepbga ii (31x31 mm) 引脚配置指南
P1020NXE2FFB（689-tepbga ii (31x31 mm) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： P1020NXE2FFB.
请参阅 数据手册 以查看完整引脚配置。
典型应用
P1020NXE2FFB 适用于 6 应用s: Multi-Service Router / Gateway, Industrial Networking / Smart Grid Gateway, Network-Attached Storage (NAS) Controller, Multi-Function Printer Controller, Wireless LAN Access Point Controller, DSLAM / Access Aggregation Line Card.
Multi-Service Router / Gateway
The P1020NXE2FFB's dual e500v2 cores at 800 MHz deliver the parallel processing headroom required for simultaneous WAN routing, firewall, and VPN termination at gigabit line rates. Hardware SEC 4.0 offloads AES-256 IPSec/SSL/TLS, sustaining 1 Gbps encrypted throughput without CPU loading, while three GbE interfaces (2x SGMII + 1x RGMII) connect directly to WAN PHY and LAN switch fabric without external MAC devices.
推荐
Industrial Networking / Smart Grid Gateway
The -40C to +125C extended-temperature grade (FFB suffix) and hardware ECC memory controller make the P1020NXE2FFB well-suited for outdoor Smart Grid gateways, substation routers, and SCADA communication nodes. Dual PCIe Gen 1 lanes connect to Wi-Fi 6 and cellular modems, while the SEC engine secures DNP3/IEC 61850 traffic - critical infrastructure requiring FIPS-validated cryptography at the network edge.
推荐
Network-Attached Storage (NAS) Controller
The dual-core architecture and DDR3 with ECC memory controller provide the throughput required for NAS controllers managing multi-drive SATA arrays and gigabit network traffic. SEC 4.0 hardware encryption enables AES-256 volume encryption with negligible throughput penalty, while USB 2.0 with ULPI connects to front-panel LCD/button interfaces and PCIe x4 connects to SATA or SAS RAID controllers.
推荐
Multi-Function Printer Controller
The integrated MAPLE-B2 print/image acceleration block offloads rendering and image processing, offloading these workloads from the CPU cores to deliver fast first-page-out times. Dual cores handle network protocol stacks (TCP/IP, SMB, IPP, LPD) while MAPLE handles 600+ DPI rasterization, and TDM channels interface with analog fax/modem modules - making this a true single-chip MFP SoC.
推荐
Wireless LAN Access Point Controller
Three GbE interfaces support mesh backhaul and PoE uplink, while two PCIe x1 lanes connect to dual-band 802.11ac/ax Wi-Fi radios. The SEC 4.0 engine accelerates WPA2-Enterprise / WPA3 encryption for enterprise AP deployments, and the e500v2 cores run the hostapd/control-plane stack with hardware crypto at line rate - delivering carrier-grade access point throughput.
推荐
DSLAM / Access Aggregation Line Card
TDM channels aggregate legacy T1/E1/J1 voice circuits while PCIe interfaces connect to DSL PHY devices and backhaul Ethernet. The dual cores handle layer-2/3 forwarding across thousands of subscribers with hardware QoS, and the ECC memory controller protects routing tables from soft errors - critical for carrier-grade uptime in central-office deployments.
推荐
推荐产品汇总
工程参考数据： P1020NXE2FFB ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | P1020NXE2HFB | P1010NXE2HFB | P1011NSN2HFB | P2020NXE2HFB | P1020NSE2HFB | P1014NXE2HFB |
|---|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 689-TEPBGA II (31x31 mm) | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same | 689-TEPBGA II (31x31 mm) - same |
| Architecture | Power Architecture e500v2 dual-core | Power Architecture e500v2 dual-core (same) | Power Architecture e500v2 single-core | Power Architecture e500v2 single-core | Power Architecture e500v2 dual-core | Power Architecture e500v2 dual-core (same) | Power Architecture e500v2 single-core |
| Maximum Core Frequency | 800 MHz | 800 MHz (same) | 800 MHz | 800 MHz | 1.2 GHz (+50%) | 800 MHz (same) | 800 MHz |
| Core Count | 2 | 2 (same) | 1 (-50%) | 1 (-50%) | 2 (same) | 2 (same) | 1 (-50%) |
| Operating Temperature | -40C to +125C (junction) | -40C to +85C (commercial) | -40C to +85C (commercial) | -40C to +85C (commercial) | -40C to +85C (commercial) | -40C to +85C (commercial) | -40C to +105C (industrial) |
| Security Engine | SEC 4.0 | SEC 4.0 (same) | SEC 3.4 | SEC 3.4 | SEC 4.0 (same) | SEC 4.0 (same) | SEC 4.0 |
| Lifecycle Status | Last-Time-Buy | Last-Time-Buy | Obsolete | Obsolete | NRND | Obsolete | Obsolete |
关键差异点
- Extended temperature grade up to 125C junction （对比 P1020NXE2HFB)
- Dual-core vs single-core scaling （对比 P1011NSN2HFB)
- SEC 4.0 vs SEC 3.4 hardware crypto （对比 P1010NXE2HFB)
设计说明
The 689-TEPBGA II package at 31x31 mm requires thermal via arrays (0.3 mm drill, 1.0 mm pitch) under the thermal pad connected to internal ground planes. Estimated: at 800 MHz dual-core operation with 0.9V core voltage and 1.5W typical dissipation, junction-to-ambient thermal resistance of approximately 15 C/W on a 4-layer JEDEC JESD51 board keeps Tj under 100C at 70C ambient, but thermal design margin should be verified per NXP AN3939 for extended-temperature FFB-grade operation.
DDR3 interface requires matched-length routing (within 25 mil) for byte lanes and 50-ohm single-ended controlled impedance per JEDEC. Estimated: trace impedance target is 50 ohms +/-10% with reference to GND plane within 8 mil. Use fly-by topology for command/address signals with termination VTT at the far end; VTT decoupling requires 100 uF bulk plus 0.1 uF per-pin bypass capacitors.
Power-up sequencing must follow NXP datasheet requirements: VDD (0.9V/1.0V core) ramps first, followed by VDDQ (1.5V DDR), then VDDIO (3.3V). Each rail requires monotonic ramp with <20 ms rise time and proper POR sequencing controller (e.g., NUP4202 or similar) to prevent ESD latch-up. Estimated: total inrush during power-up ramp is approximately 800 mA peak across all rails for the dual-core variant.
SGMII serial interfaces require AC-coupled routing with 0.1 uF capacitors in series and 100-ohm differential impedance per IEEE 802.3. PCIe Gen 1 lanes require similar 85-100 ohm differential routing with maximum 4-inch trace length and 2 skew-matching vias; reference clock must be routed as 100-ohm differential with no stub branches. Place AC caps within 200 mils of the device ball.
Common design pitfalls include: (1) omitting JTAG pull-ups on TCK/TMS/TRST, causing boundary-scan failures; (2) leaving TEST_SEL pins floating, which can put the device in factory test mode; (3) using single-core boot code on dual-core silicon, which only enables core 0; (4) violating the maximum reflow temperature of 260C peak for the TEPBGA package; (5) not enabling the SEC engine in U-Boot for production secure-boot deployments.
合规信息
RoHS compliant and lead-free per NXP product page and DigiKey listing. Not AEC-Q100 qualified (industrial grade); halogen-free status not explicitly stated in verified data. SEC 4.0 engine can be FIPS 140-2 validated at the system level for federal applications.
