المنتجات (46,000+)

STM32F411CEU6 - 100MHz Cortex-M4F 512KB MCU | STMicroelectronics
STM32F411CEU6

STM32F411CEU6 - 100MHz Cortex-M4F 512KB MCU | STMicroelectronics

The STMicroelectronics STM32F411CEU6 is a 32-bit ARM Cortex-M4F microcontroller running at up to 100 MHz with 512 KB flash memory and 128 KB SRAM, housed in a 48-pin UFQFPN (7x7 mm) package. A microcontroller (MCU) is a compact integrated circuit that combines a processor core, memory, and programmable peripherals to govern a specific operation in an embedded system. MCUs sit within the broader hierarchy of ARM Cortex-M processors, flash microcontrollers, and power management/embedded control semiconductors. The STM32F411 belongs to the STM32F4 'Dynamic Efficiency' series from STMicroelectronics, part of the wider STM32 32-bit MCU family built on the ARM Cortex-M architecture. Key features include the Cortex-M4F core with single-precision FPU and DSP instructions delivering 125 DMIPS (1.25 DMIPS/MHz), 512 KB flash with 128 KB SRAM, a wide 1.7 V to 3.6 V supply range, and ST's Batch Acquisition Mode (BAM) for reduced power consumption during data conversion. Peripherals include USB OTG FS/HS, SDIO, I2S, multiple SPI/I2C/USART interfaces, 12-bit ADC, general-purpose timers, RTC, and a memory protection unit (MPU). Technically, the device is fabricated on ST's 90 nm process and features dynamic voltage scaling with multiple low-power modes (Sleep, Stop, Standby), enabling battery-powered designs with excellent performance-per-milliamp. The ART accelerator and 128-bit wide flash interface allow zero-wait-state execution at this clock speed tier. Typical applications include IoT end nodes, wearable electronics, motor control, audio processing, drones, and industrial automation, where the FPU and DSP instructions accelerate sensor fusion and control algorithms. Design-wise, decouple each VDD pin with 100 nF capacitors placed close to the pins, keep VDDA on a clean analog supply, and configure BOOT0 correctly for the desired boot source. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the STMicroelectronics datasheet.

USD $3.48 اتصل بنا
STM32F411CEU6TR - 100MHz Cortex-M4F 512KB MCU | STMicroelectronics (Tape & Reel)
STM32F411CEU6TR

STM32F411CEU6TR - 100MHz Cortex-M4F 512KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F411CEU6TR is a 32-bit ARM Cortex-M4F microcontroller running at up to 100 MHz with 512 KB flash memory and 128 KB SRAM, housed in a 48-pin UFQFPN (7x7 mm) package. A microcontroller (MCU) is a compact integrated circuit that combines a processor core, memory, and programmable peripherals to govern a specific operation in an embedded system. MCUs sit within the broader hierarchy of ARM Cortex-M processors, flash microcontrollers, and power management/embedded control semiconductors. The STM32F411 belongs to the STM32F4 'Dynamic Efficiency' series from STMicroelectronics, part of the wider STM32 32-bit MCU family built on the ARM Cortex-M architecture. Key features include the Cortex-M4F core with single-precision FPU and DSP instructions delivering 125 DMIPS (1.25 DMIPS/MHz), 512 KB flash with 128 KB SRAM, a wide 1.7 V to 3.6 V supply range, and ST's Batch Acquisition Mode (BAM) for reduced power consumption during data conversion. Peripherals include USB OTG FS/HS, SDIO, I2S, multiple SPI/I2C/USART interfaces, 12-bit ADC, general-purpose timers, RTC, and a memory protection unit (MPU). Technically, the device is fabricated on ST's 90 nm process and features dynamic voltage scaling with multiple low-power modes (Sleep, Stop, Standby), enabling battery-powered designs with excellent performance-per-milliamp. The ART accelerator and 128-bit wide flash interface allow zero-wait-state execution at this clock speed tier. Typical applications include IoT end nodes, wearable electronics, motor control, audio processing, drones, and industrial automation, where the FPU and DSP instructions accelerate sensor fusion and control algorithms. Design-wise, decouple each VDD pin with 100 nF capacitors placed close to the pins, keep VDDA on a clean analog supply, and configure BOOT0 correctly for the desired boot source. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the STMicroelectronics datasheet.

USD $2.40 اتصل بنا
STM32F411CEU6U - 100MHz Cortex-M4 512KB MCU | STMicroelectronics
STM32F411CEU6U

STM32F411CEU6U - 100MHz Cortex-M4 512KB MCU | STMicroelectronics

The STMicroelectronics STM32F411CEU6U is an Arm Cortex-M4 32-bit RISC microcontroller rated up to 100 MHz, with 512 KB of Flash memory, 128 KB of RAM, USB OTG FS, 11 timers, one ADC, and 13 communication interfaces in a 48-pin UFQFPN package. Its 1.7 V to 3.6 V supply range supports compact embedded, industrial, and USB-connected control systems. A microcontroller is an integrated circuit that combines a processor core, memory, peripherals, and communication interfaces on one semiconductor die. In the device hierarchy, the STM32F411CEU6U belongs to the STM32F4 family, combines an MCU with a Cortex-M4 processor core, and operates as the central control element in embedded systems. Digital I/O, analog conversion, timers, serial links, and USB connectivity allow one device to supervise sensors, actuators, communications, and user interfaces. The principal features are 100 MHz processing, 512 KB Flash, 128 KB RAM, USB OTG FS, 11 timers, one ADC, and 13 communication interfaces. The available data also identifies a Dynamic Efficiency Line architecture with Batch Acquisition Mode and a 1.7 V to 3.6 V power-supply range. These resources suit applications requiring moderate real-time computation, multiple peripheral functions, and USB connectivity without an external memory interface. STMicroelectronics describes the STM32F411xC/xE devices as using a high-performance Arm Cortex-M4 core operating up to 100 MHz. At the device level, this performance supports control-loop execution, protocol handling, and peripheral coordination. USB OTG FS is particularly useful for portable peripherals, configuration interfaces, data acquisition, and firmware update workflows. The verified record also reports 125 DMIPS and a floating-point unit in the device summary. Typical uses include USB-connected data loggers, compact sensor nodes, motor and motion controllers, industrial instruments, access-control terminals, and consumer-control boards. The 48-pin surface-mount package and embedded USB interface reduce the need for external glue logic. Firmware, peripheral assignments, clock configuration, and exposed-pin requirements must still be checked for each board because package-level alternatives cannot be assumed to be register- or software-compatible. A critical design consideration is the exposed-pad connection. Thermal and electrical performance depends on following the manufacturer land pattern, connecting the exposed pad to the appropriate supply or ground net, and observing the 1.7 V to 3.6 V range. Decoupling, clock stability, reset design, USB routing, and firmware initialization must follow the STM32F411 hardware documentation. This product record combines verified manufacturer-device data, distributor packaging information, cross-reference results, and practical engineering guidance. It distinguishes documented capabilities from unavailable parameters and avoids presenting generic STM32 alternatives as drop-in replacements when pin, peripheral, or software compatibility is unverified.

طلب عرض سعر اتصل بنا
STM32F411CEU7 - 100MHz Cortex-M4 512KB MCU | STMicroelectronics
STM32F411CEU7

STM32F411CEU7 - 100MHz Cortex-M4 512KB MCU | STMicroelectronics

The STMicroelectronics STM32F411CEU7 is a 32-bit Arm Cortex-M4 microcontroller with FPU and DSP capability, operating up to 100 MHz, with 512 KB of Flash memory and a 48-pin UFQFPN package. The verified distributor data identifies 36 I/O, USB OTG FS, 11 timers, one ADC, and 13 communication interfaces. These specifications place the device in the STM32F4 high-performance microcontroller family for compact embedded products. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one package. The Cortex-M4 core provides real-time control capabilities, while the FPU accelerates floating-point calculations and DSP instructions support signal-processing workloads. STM32F411CEU7 combines these functions with USB and extensive serial peripherals, allowing one controller to manage application logic and external communication. Verified features include a maximum CPU frequency of 100 MHz, 512 KB of Flash, 128 KB of RAM, 125 DMIPS, and an Arm Cortex-M4 core with FPU. The device also supports USB OTG FS and an SD/SDIO/MMC/eMMC host interface with 1-bit, 4-bit, and 8-bit bus modes. These resources suit data acquisition, human-interface equipment, industrial controllers, and USB-connected accessories. The STM32F4 architecture combines the Cortex-M4 processor with configurable peripherals and direct-memory-access support. Its performance headroom allows real-time control and moderate digital signal processing in the same design. The 36 I/O listed by the verified distributor data provide connections for sensors, displays, communication transceivers, and actuators, subject to each peripheral's alternate-function and electrical constraints. Typical applications include industrial monitoring, USB data loggers, building-control modules, medical-instrument peripherals, consumer accessories, and communication equipment. USB OTG FS is particularly useful for a direct host or device interface, while the SD host capability supports removable or embedded storage. Firmware must still validate USB descriptors, storage timing, peripheral pin mapping, and system clock configuration. PCB design should preserve the package pin assignments, exposed-pad connections, and decoupling requirements stated by the manufacturer datasheet. Place required bypass capacitors close to their supply pins, route high-speed signals with short returns, and keep analog and digital return paths controlled. Validate the final board for signal integrity, thermal behavior, and production test coverage. This page combines verified manufacturer and distributor facts, documented drop-in alternatives, application guidance, and design cautions that are not organized together on a standard distributor listing. It is intended to support engineering selection and procurement while clearly separating verified values from information that still requires design verification.

طلب عرض سعر اتصل بنا
STM32F411CEY3TR - 100MHz Cortex-M4 MCU, 512KB Flash, 49-WLCSP | STMicroelectronics
STM32F411CEY3TR

STM32F411CEY3TR - 100MHz Cortex-M4 MCU, 512KB Flash, 49-WLCSP | STMicroelectronics

The STMicroelectronics STM32F411CEY3TR is a high-performance ARM Cortex-M4 microcontroller with FPU and DSP instructions, delivering 125 DMIPS at 100 MHz, 512 KB of Flash, and 128 KB of SRAM in a compact 49-ball WLCSP (3.0 x 3.19 mm) package. It is part of the STM32F4 "access line" targeting cost-sensitive applications that still require the Cortex-M4 DSP/FPU engine and rich peripheral set. An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core with single-precision floating-point unit and single-cycle MAC DSP instructions, sitting in the Cortex-M family hierarchy (Cortex-M0/M0+/M3/M4/M7/M33). It is widely used in embedded systems for motor control, audio processing, sensor fusion, and IoT edge nodes where deterministic real-time performance and low power are both required. Key features of the STM32F411CEY3TR include up to 100 MHz CPU clock with ART Accelerator for 0-wait-state Flash execution, 512 KB Flash, 128 KB SRAM, USB 2.0 FS OTG, 11 timers (including motor-control PWM and 32-bit timers), one 12-bit ADC up to 2.4 MSPS, and up to 13 communication interfaces (USART, SPI, I2C, I2S, USB, CAN, SDIO). The 49-WLCSP package is the smallest footprint option in the STM32F411 family, enabling wearable and space-constrained designs. The architecture uses a multi-AHB bus matrix and dedicated DMA streams, giving the Cortex-M4 deterministic access to peripherals and memory. The ART Accelerator pre-fetches and caches Flash lines, allowing the core to execute from Flash with zero wait states at full 100 MHz, eliminating the typical speed penalty of embedded Flash. Typical applications include wearable fitness/health devices, consumer audio, USB HID/CDC devices, drones and small quadcopters, sensor hubs, and compact IoT nodes. The WLCSP package is particularly suited for ultra-compact PCB designs where BGA-like density is required but lead-free reflow compatibility is desired. When designing with this device, pay attention to the WLCSP PCB land pattern: 0.4 mm pitch requires NSMD pads, laser-drilled vias, and a reflow profile matched to ST's WLCSP soldering recommendations. For 5V-tolerant I/O, confirm the specific pin map in the WLCSP variant datasheet - WLCSP packages often omit some 5V-tolerant pins due to space constraints. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical PCB layout notes for the WLCSP variant not found in the manufacturer datasheet alone.

طلب عرض سعر اتصل بنا
STM32F411CEY6TR - 100MHz Cortex-M4 MCU 512KB Flash 49-WLCSP | ST
STM32F411CEY6TR

STM32F411CEY6TR - 100MHz Cortex-M4 MCU 512KB Flash 49-WLCSP | ST

The STMicroelectronics STM32F411CEY6TR is a high-performance ARM Cortex-M4 32-bit microcontroller with FPU and DSP instructions, running at up to 100 MHz and delivering 125 DMIPS, packaged in a compact 49-ball WLCSP (3x3.19 mm). It integrates 512 KB of Flash and 128 KB of SRAM, with USB OTG full-speed and a rich set of peripherals for embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash and RAM), and programmable peripherals. The Cortex-M4 family adds a single-precision FPU and DSP extensions, making it suitable for signal processing, sensor fusion, and motor control. MCUs sit at the lowest layer of the embedded hierarchy: SoC -> MCU -> Cortex-M4 -> STM32F4 series, and are governed by standards such as CMSIS, Arm Embedded ABI, and IEC 60730 for functional safety. Key features of the STM32F411CEY6TR include 512 KB Flash, 128 KB SRAM, an ART Accelerator with 4 KB instruction cache that delivers 0-wait-state execution from Flash at 100 MHz, an active current consumption around 100 uA/MHz, and a comprehensive peripheral set including USB OTG FS, SPI, I2C, USART, timers, ADC, and SDIO. The integrated FPU accelerates floating-point math used in audio and control loops. Architecturally, the device is built on a 90 nm CMOS process and uses ST's adaptive real-time ART Accelerator to eliminate Flash wait states, achieving benchmark-leading 1.25 DMIPS/MHz performance. The Cortex-M4 core is paired with a Nested Vectored Interrupt Controller (NVIC) supporting 16 priority levels, a Memory Protection Unit (MPU), and CoreSight debug/trace for production-safe development. Typical applications include wearable fitness devices, drones and quadcopter flight controllers, USB HID peripherals, audio processing units, and low-power IoT edge nodes. The WLCSP package and aggressive 100 uA/MHz current make it attractive for size-constrained battery-powered designs. When designing, place the WLCSP decoupling network (100 nF + 4.7 uF) within 2 mm of the supply balls, route the HSE/LSE traces as short as possible, and respect the WLCSP underfill recommendation if the board will see mechanical stress. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا
STM32F411CEY6UTR - 100MHz Cortex-M4 512KB MCU | STMicroelectronics
STM32F411CEY6UTR

STM32F411CEY6UTR - 100MHz Cortex-M4 512KB MCU | STMicroelectronics

STMicroelectronics STM32F411CEY6UTR is a 32-bit ARM Cortex-M4 microcontroller with floating-point unit, 125 DMIPS performance, 512 KB of Flash memory, and 128 KB of SRAM in a 49-ball WLCSP package. The device operates from a 3.3 V supply and integrates USB OTG full-speed, 11 timers, one ADC, and 13 communication interfaces for compact embedded control, sensor, audio, and USB-connected systems. A microcontroller is an integrated circuit containing a processor core, memory, peripherals, and interface logic on one semiconductor device. The STM32F411 belongs to the STM32F4 family of 32-bit microcontrollers, where the ARM Cortex-M4 core combines deterministic real-time execution with DSP and floating-point instructions. The STM32F411CEY6UTR is a general-purpose embedded MCU rather than a dedicated analog or power-management component, placing it within the broader semiconductor and embedded-processing hierarchy. Its primary features include 100 MHz maximum CPU frequency, 125 DMIPS performance, 512 KB embedded Flash, 128 KB SRAM, an Arm Cortex-M4 FPU, USB OTG FS connectivity, and 11 timers. The 13 communication interfaces broaden connectivity options for serial peripherals, industrial buses, memory devices, and external controllers. These resources allow product designers to consolidate functions that otherwise require a processor and several discrete interface devices. The STM32F411 architecture supports efficient control-loop execution, while the Cortex-M4 FPU accelerates software algorithms that benefit from single-precision floating-point arithmetic. Its combination of SRAM, Flash, timers, and serial interfaces is suitable for real-time data acquisition, control, communications, and compact human-interface systems. Exact ADC resolution, voltage ranges, timer channel counts, and peripheral operating limits should be confirmed in the manufacturer datasheet for the selected package and ordering code. Typical uses include USB-connected accessories, wearable and portable devices, industrial sensing nodes, audio-control equipment, motor-control sub-systems, and compact consumer products. The 49-ball WLCSP footprint supports dense layouts but requires careful PCB design, fine-pitch assembly capability, and reliable power and ground distribution. The manufacturer documentation also describes an SD/SDIO/MMC/eMMC host interface supporting MultiMediaCard System Specification Version 4.2 in 1-bit, 4-bit, and 8-bit data-bus modes. Designers should validate all 49 package balls against the manufacturer pinout before layout and must preserve the power, ground, decoupling, and exposed routing requirements defined by the datasheet and PCB design guidance. Firmware and peripheral configuration should be checked against the exact STM32F411xC or STM32F411xE variant because ordering suffixes can encode operating-temperature, package, and reel-handling options. This product page consolidates verified manufacturer specifications, distributor availability, same-family drop-in candidates, package constraints, and practical design guidance. It also distinguishes verified production data from specifications that require confirmation, helping engineers evaluate the STM32F411CEY6UTR for new PCB designs without treating unqualified substitutions as automatic replacements.

طلب عرض سعر اتصل بنا
STM32F411RCT6 - 100MHz Cortex-M4 MCU 256KB | STMicroelectronics
STM32F411RCT6

STM32F411RCT6 - 100MHz Cortex-M4 MCU 256KB | STMicroelectronics

The STMicroelectronics STM32F411RCT6 is an Arm Cortex-M4 32-bit RISC microcontroller operating at up to 100 MHz, integrating 256 KB of Flash memory and 128 KB of SRAM in a 64-pin LQFP (10x10 mm) package. As a member of the STM32F4 Access Line, it pairs the high-performance Cortex-M4 core (with single-precision FPU and DSP instructions) with ST's Dynamic Efficiency features, including the Batch Acquisition Mode (BAM) for extended battery runtime. Its supply range of 1.7 V to 3.6 V and -40C to +85/105/125C operating window suit industrial-grade embedded designs. What is a microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, peripherals, and I/O on one die. The STM32F411RCT6 sits in the hierarchy: Cortex-M4 -> Arm Cortex-M family -> 32-bit RISC processor -> microprocessor -> semiconductor IC. It functions as the active computational element in embedded systems, executing firmware stored in Flash while coordinating communication, sensing, and actuation through on-chip peripherals. Key features include the FPU and DSP extensions, an 8 MHz internal RC oscillator, USB 2.0 Full-Speed OTG, up to 11 timers, three I2C, three SPI, three USART, one UART, plus a 12-bit ADC, SDIO, and a real-time clock. The Adaptive Real-Time (ART) Accelerator enables zero-wait-state execution from Flash, allowing the core to sustain 100 MHz throughput without instruction stalls. A built-in voltage regulator and POR/PDR/PVD circuits reduce external components, while a 4-byte backup register and RTC domain with optional VBAT keep critical state across power-down cycles. The 64-pin LQFP exposes 50+ GPIO, expanding to multiple alternate functions for motor drive, display, and audio interfaces. Internal bus matrix (AHB/APB) connects the DMA controller (8-channel) to memory and peripherals, offloading data movement from the CPU. Typical applications include consumer medical devices such as glucose meters and portable diagnostics, USB peripherals including HID mass-storage and CDC bridges, motor control for small BLDC and stepper drives, and home audio processing units. Industrial HMI panels and IoT sensor gateways also leverage the SRAM headroom and rich peripherals. For design, ensure VDDA is tied to VDD or filtered separately when the ADC is in use; place the MCU's bypass network within 5 mm of each pair of supply pins. For USB designs the D+/D- traces must be 90 ohm differential and matched to within 150 mil. This page synthesizes distributor stock, drop-in alternatives, pricing tiers, and PCB design notes to help procurement and embedded engineers evaluate STM32F411RCT6 alongside competing Cortex-M4 devices.

طلب عرض سعر اتصل بنا
STM32F411RCT7 - 100MHz 256KB MCU 64-LQFP | STMicroelectronics
STM32F411RCT7

STM32F411RCT7 - 100MHz 256KB MCU 64-LQFP | STMicroelectronics

The STMicroelectronics STM32F411RCT7 is an ARM Cortex-M4 32-bit microcontroller with FPU and DSP capability, operating up to 100 MHz. It provides 256 KB of flash memory, 64 KB of SRAM, USB OTG FS, 11 timers, one ADC, and 13 communication interfaces in a 64-LQFP 10 x 10 mm package. The STM32F411 family targets compact embedded systems requiring efficient performance, rich connectivity, and low-power operation. An STM32 microcontroller integrates a processor core, memory, peripherals, and communication interfaces on one semiconductor device. STM32F411 belongs to the STM32F4 performance line and combines an Arm Cortex-M4 processor with hardware floating-point and digital signal processing support. This hierarchy places it above general-purpose 8-bit microcontrollers for applications that need higher arithmetic throughput, interrupt responsiveness, and configurable peripherals. Verified distributor data identifies the target as a 32-bit, 100 MHz device with 256 KB flash and a 64-LQFP package. Its USB OTG FS interface supports USB-oriented designs, while the reported 11 timers support timing, motor-control, PWM, and periodic-service functions. The single ADC supports analog measurements, and the 13 communication interfaces allow connection requirements to be distributed across serial, bus, and USB peripherals. The Arm Cortex-M4 core executes 32-bit instructions and includes floating-point and DSP instructions. This architecture is useful for control loops, data acquisition, communication gateways, audio and signal processing, and compact industrial equipment. The 100 MHz operating frequency provides higher computational headroom than basic microcontrollers while retaining the simplicity of a single-chip embedded design. Typical applications include USB-connected data loggers, sensor hubs, industrial control modules, motor-control controllers, compact audio equipment, and connected embedded accessories. Designers should verify the exact peripheral pin assignments, electrical limits, clock tree, memory organization, and package-level thermal constraints in the STM32F411RC manufacturer documentation before finalizing a PCB. A key design consideration is package and pin planning. The 64-LQFP footprint requires careful escape routing, while the concentration of analog, communication, timer, and USB functions on a single MCU makes pin multiplexing a central board-level decision. Preserve clean grounding, follow the manufacturer's decoupling and layout guidance, and validate firmware initialization for every enabled peripheral. This page combines verified manufacturer and distributor information, same-package alternatives where supported by the supplied cross-reference results, and practical integration guidance. Because the provided search results do not establish a complete verified pin table or a fully validated five-part drop-in set, unavailable engineering values are explicitly marked rather than guessed.

طلب عرض سعر اتصل بنا
STM32F411RCT7TR - 100MHz Cortex-M4 MCU, 256KB Flash, 64-LQFP | STMicroelectronics
STM32F411RCT7TR

STM32F411RCT7TR - 100MHz Cortex-M4 MCU, 256KB Flash, 64-LQFP | STMicroelectronics

The STMicroelectronics STM32F411RCT7TR is a 32-bit ARM Cortex-M4 microcontroller with FPU and DSP instructions, operating at up to 100 MHz, integrating 256 KB of Flash and 128 KB of SRAM in a 64-pin LQFP (10x10 mm) package. The TR suffix denotes tape-and-reel packaging for high-volume SMT assembly. This high-performance access-line MCU targets consumer, industrial, and IoT applications requiring DSP capability and USB connectivity. An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core with single-precision floating-point unit and SIMD DSP instructions, forming the top tier of the Cortex-M family. Microcontrollers (MCUs) integrate CPU, memory, and peripherals on a single chip, serving as the embedded brain for everything from wearables to motor controllers. The STM32F4 series specifically targets high-performance applications needing DSP, FPU, and large memory, sitting above the Cortex-M0/M3 entry-level families. Key features of the STM32F411RCT7TR include 256 KB single-bank Flash with ART Accelerator for zero-wait-state execution, 128 KB SRAM, USB 2.0 OTG full-speed, 11 timers including motor-control PWM, one 12-bit ADC reaching 2.4 MSPS, and up to 81 GPIO lines. The 100 MHz Cortex-M4 delivers 125 DMIPS and 273 CoreMark, with single-precision FPU enabling direct floating-point math. The 64-LQFP package provides ample I/O for mixed-signal designs while remaining hand-solderable for prototypes. The architecture combines a 3-stage pipeline Cortex-M4 core with a multi-AHB bus matrix, allowing parallel DMA, USB, and peripheral access without stalling the CPU. The ART Accelerator pre-fetches instructions from Flash, eliminating the performance penalty typically seen at 100 MHz without wait states. Cryptographic and random-number hardware is not present on this part, distinguishing it from higher-end F4 variants. Typical applications include consumer audio devices, USB peripherals, small-format motor control (BLDC, stepper), home automation controllers, fitness wearables, and HMI panels. The combination of DSP, FPU, USB OTG, and generous SRAM makes it a strong choice for sensor fusion and audio decoding on a single chip. When designing with this MCU, ensure VDD is decoupled with 100 nF + 4.7 µF per supply pin, and that BOOT0 is pulled correctly for the desired boot mode. The 64-LQFP lacks the extra I/O of 100-pin variants, so plan pin assignments against the alternate-function matrix before committing to layout.

USD $7.38 متوفر
STM32F411RET6 - 512KB Flash 100MHz Cortex-M4F MCU | STMicroelectronics
STM32F411RET6

STM32F411RET6 - 512KB Flash 100MHz Cortex-M4F MCU | STMicroelectronics

The STMicroelectronics STM32F411RET6 is a high-performance ARM Cortex-M4F based 32-bit microcontroller with floating-point unit (FPU) operating at up to 100 MHz, featuring 512 KB of flash memory and 128 KB of SRAM, housed in a 64-pin LQFP (LQFP64) package with a 10x10 mm body and 0.5 mm pitch. A microcontroller (MCU) is a compact integrated circuit that combines a processor core, memory, and programmable input/output peripherals on a single chip to govern a specific operation in an embedded system. The STM32F411RET6 belongs to the STM32F4 series within the broader STM32 family of 32-bit flash microcontrollers based on ARM Cortex-M cores, a family widely used across industrial, consumer, and IoT systems thanks to its balance of performance, power efficiency, and peripheral integration. Key features include the 100 MHz ARM Cortex-M4F core with single-cycle FPU and DSP instructions delivering 125 DMIPS, 512 KB flash, 128 KB SRAM, and a rich peripheral set: 3 USARTs, 5 SPIs, 3 I2Cs, 1 SDIO, 1 USB 2.0 OTG FS, 1 CAN, a 12-bit ADC with 16 channels, and multiple timers including advanced-control timers. A true random number generator (RNG), real-time clock (RTC), and CRC calculation unit are also integrated. The device is fabricated on ST's 90 nm process technology and operates from a 1.7V to 3.6V supply over an industrial temperature range of -40C to +85C. Several low-power modes (Sleep, Stop, Standby) support battery-operated designs, while the FPU accelerates DSP and control algorithms. The large embedded memory enables complex applications without external storage components. Typical applications include industrial control systems, motor drives, IoT gateways, consumer electronics, and USB/CAN-connected devices where the USB OTG FS and CAN interfaces provide native connectivity. When designing with this MCU, decouple each VDD pin with 100nF close to the pin, keep the VDDA supply clean for ADC accuracy, and exploit Stop/Standby modes with appropriate wake-up sources in power-sensitive designs. This page synthesizes distributor pricing, drop-in alternatives, pinout, and practical design notes not found in the manufacturer datasheet alone.

طلب عرض سعر اتصل بنا
STM32F411RET6TR - 512KB Flash 100MHz Cortex-M4F MCU | STMicroelectronics (Tape & Reel)
STM32F411RET6TR

STM32F411RET6TR - 512KB Flash 100MHz Cortex-M4F MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F411RET6TR is a high-performance ARM Cortex-M4F based 32-bit microcontroller with floating-point unit (FPU) operating at up to 100 MHz, featuring 512 KB of flash memory and 128 KB of SRAM, housed in a 64-pin LQFP (LQFP64) package with a 10x10 mm body and 0.5 mm pitch. A microcontroller (MCU) is a compact integrated circuit that combines a processor core, memory, and programmable input/output peripherals on a single chip to govern a specific operation in an embedded system. The STM32F411RET6TR belongs to the STM32F4 series within the broader STM32 family of 32-bit flash microcontrollers based on ARM Cortex-M cores, a family widely used across industrial, consumer, and IoT systems thanks to its balance of performance, power efficiency, and peripheral integration. Key features include the 100 MHz ARM Cortex-M4F core with single-cycle FPU and DSP instructions delivering 125 DMIPS, 512 KB flash, 128 KB SRAM, and a rich peripheral set: 3 USARTs, 5 SPIs, 3 I2Cs, 1 SDIO, 1 USB 2.0 OTG FS, 1 CAN, a 12-bit ADC with 16 channels, and multiple timers including advanced-control timers. A true random number generator (RNG), real-time clock (RTC), and CRC calculation unit are also integrated. The device is fabricated on ST's 90 nm process technology and operates from a 1.7V to 3.6V supply over an industrial temperature range of -40C to +85C. Several low-power modes (Sleep, Stop, Standby) support battery-operated designs, while the FPU accelerates DSP and control algorithms. The large embedded memory enables complex applications without external storage components. Typical applications include industrial control systems, motor drives, IoT gateways, consumer electronics, and USB/CAN-connected devices where the USB OTG FS and CAN interfaces provide native connectivity. When designing with this MCU, decouple each VDD pin with 100nF close to the pin, keep the VDDA supply clean for ADC accuracy, and exploit Stop/Standby modes with appropriate wake-up sources in power-sensitive designs. This page synthesizes distributor pricing, drop-in alternatives, pinout, and practical design notes not found in the manufacturer datasheet alone.

طلب عرض سعر اتصل بنا
STM32F411RET6U - 100MHz Cortex-M4 512KB MCU | STMicroelectronics
STM32F411RET6U

STM32F411RET6U - 100MHz Cortex-M4 512KB MCU | STMicroelectronics

The STMicroelectronics STM32F411RET6U is a 32-bit ARM Cortex-M4 microcontroller with FPU, operating up to 100 MHz and integrating 512 KB Flash, 128 KB RAM, and USB OTG FS in a 64-LQFP package. The verified distributor result identifies the device as an STM32F4 series MCU with 512K x 8 Flash memory and a 10 x 10 mm 64-LQFP package. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and interface circuitry into one semiconductor package. The STM32F411 belongs to the STM32F4 family and combines an embedded ARM Cortex-M4 core, floating-point hardware, serial interfaces, timers, and connectivity functions. It is designed for embedded control, data acquisition, communication, and compact consumer or industrial products. Key verified features include a 32-bit Cortex-M4 processor, 100 MHz maximum operating frequency, 512 KB Flash, 128 KB RAM, and USB OTG FS. The provided search data also describes 125 DMIPS and identifies the package as 64-LQFP. The ARM Cortex-M4 core provides a compact instruction set and efficient real-time execution, while the hardware FPU accelerates suitable floating-point operations without requiring a separate coprocessor. The STM32F411RET6U is positioned for designs that require moderate embedded processing performance, USB connectivity, and a conventional leaded package. Its 64-LQFP construction supports visual inspection and prototyping workflows more readily than many fine-pitch land-grid-array packages, while still providing a substantial pin count for external sensors, actuators, communications, and memory. Typical applications include USB-connected control systems, compact sensor nodes, industrial instrumentation, consumer accessories, motor-control peripherals, and communication equipment. Designers should verify voltage levels, clock configuration, pin multiplexing, power sequencing, decoupling, and peripheral assignments against the manufacturer datasheet before production release. For a new design, the STM32F411RET6U is appropriate when the system needs a 100 MHz Cortex-M4 class MCU, 512 KB Flash, 128 KB RAM, and USB OTG FS without requiring the larger memory or peripheral set of an STM32F405 or STM32F407. A pin-compatible replacement should be selected only after checking the exact package, pin multiplexing, clock tree, interrupt mapping, and peripheral population. This product record combines verified distributor and manufacturer search results with application guidance, source links, and explicit data gaps. It is intended to help engineers identify the correct STM32F411RET6U package and assess whether its verified resources match the target system.

طلب عرض سعر اتصل بنا
STM32F411RET7 - 100MHz Cortex-M4 512KB MCU | STMicroelectronics
STM32F411RET7

STM32F411RET7 - 100MHz Cortex-M4 512KB MCU | STMicroelectronics

The STMicroelectronics STM32F411RET7 is a 32-bit ARM Cortex-M4 microcontroller with a 100 MHz operating frequency, 512 KB of Flash memory, and a 64-LQFP 10 x 10 mm package. It combines a floating-point unit and DSP capability with 128 KB of SRAM, USB OTG full-speed connectivity, and a broad set of serial and timing peripherals. These verified headline values place it in the performance-class STM32F4 family hierarchy: Cortex-M MCU, embedded microcontroller, and 32-bit ARM processor. A microcontroller is a compact computer integrated onto one semiconductor device. It combines a processor core with program Flash, working memory, input/output ports, communication peripherals, timers, interrupts, and reset and clock circuitry. The STM32F411RET7 executes firmware to acquire data, run control algorithms, communicate with sensors, drive displays, and coordinate external devices. Its ARM Cortex-M4 architecture provides deterministic real-time processing suitable for embedded control rather than general-purpose desktop computing. Verified features include an Arm Cortex-M4 core with DSP and FPU support, 512 Kbytes of Flash, 128 KB RAM, a maximum listed frequency of 100 MHz, and USB OTG FS. The distributor descriptions also identify the device as an STM32F4 high-performance access-line microcontroller. Its combination of 512 KB program storage and 128 KB working memory reduces the need for external memory in connected-control designs, while the integrated FPU accelerates suitable floating-point workloads. The device uses a 64-LQFP package measuring 10 x 10 mm according to the verified distributor record. A microcontroller is classified within the semiconductor and embedded-processing hierarchy, while this part specifically provides real-time control, data acquisition, USB connectivity, and signal processing. Exact voltage ranges, I/O characteristics, peripheral assignments, pin names, operating-temperature limits, and package dimensions beyond the supplied data must be confirmed in the manufacturer documentation before schematic release. Typical uses include USB-connected data acquisition, industrial control panels, sensor hubs, compact test equipment, consumer accessories, and communication-oriented embedded products. Its 100 MHz Cortex-M4 core supports responsive control tasks, while the DSP and FPU features are useful when an algorithm benefits from hardware floating-point execution. USB OTG FS can support a direct USB peripheral connection when the board design, firmware, and required USB class are implemented correctly. Design planning should begin with the exact manufacturer pinout, power requirements, decoupling network, clock strategy, boot configuration, and programming interface. Do not infer unused pins or transceiver details from family knowledge. Confirm all 64 pin assignments against the official STM32F411RET7 documentation and validate USB signal routing, analog isolation, and firmware support before releasing PCB artwork. This page distinguishes verified distributor information from parameters that still require direct manufacturer confirmation. This page consolidates the verified 100 MHz Cortex-M4, 512 KB Flash, 128 KB RAM, USB OTG FS, and 64-LQFP facts while separating unknown technical values from sourced data. It also records distributor pricing evidence, sourcing links, and engineering-selection guidance rather than presenting unverified substitute parts as drop-in replacements.

طلب عرض سعر اتصل بنا
STM32F411VCH6 - 100MHz Cortex-M4 256KB MCU | STMicroelectronics
STM32F411VCH6

STM32F411VCH6 - 100MHz Cortex-M4 256KB MCU | STMicroelectronics

The STMicroelectronics STM32F411VCH6 is a 32-bit ARM Cortex-M4 microcontroller with a 100 MHz maximum clock, 256 KB of Flash memory, and a 100-ball UFBGA package measuring 7 mm by 7 mm. It combines a single-precision floating-point processor with extensive serial connectivity, making it suitable for compact embedded products that need efficient real-time control and USB connectivity without a large external memory system. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, input/output ports, timers, communication controllers, and supporting peripherals. The STM32F4 family belongs to the embedded-processor hierarchy: Cortex-M4 core, 32-bit microcontroller, embedded controller, and semiconductor. This device is designed for applications requiring deterministic control, moderate data throughput, and a broad selection of communication interfaces. Verified distributor information identifies the STM32F411VCH6 as an ARM Cortex-M4 MCU with 100 MHz operation, 256 KB Flash, and a 100-UFBGA 7 mm by 7 mm package. A manufacturer-linked datasheet search result also describes the device as an STM32F4-series MCU with brown-out detection, DMA, PWM, watchdog, I2C, IrDA, LIN, MMC/SD/SDIO, SPI, UART/USART, USB OTG, and I2S support. The exact ordering-code temperature grade, voltage limits, pin names, and package ball map are not supplied in the verified web data and therefore remain explicitly unavailable below. The Cortex-M4 architecture gives the device enough compute capability for sensor aggregation, motor and actuator control, human-interface input, logging, and USB-connected embedded equipment. Its 256 KB Flash is suitable for moderate firmware volumes, while the exact RAM capacity should be confirmed against the manufacturer datasheet before memory budgeting. The availability of USB OTG and multiple serial buses allows a compact board to connect sensors, displays, storage, and service peripherals without requiring a separate communications controller. Typical designs place the MCU beside a crystal or clock source, power regulation, decoupling capacitors, input sensors, and output drivers. Designers should preserve the package ball assignments and decoupling requirements from the manufacturer reference design rather than inferring them from the distributor package description. USB differential routing, exposed thermal-management features, and any high-current I/O behavior also require layout review against the official datasheet. For procurement, search results list STM32F411VCH6 at DigiKey, Mouser, LCSC, Octopart, WIN SOURCE, and other distributors. One LCSC result reports an in-stock price from $2.7474, while another source reports $5.33340; those values are not treated as a universal current price because quantity, stock, and region are not fully specified. This page separates verified facts from missing technical details and identifies the exact procurement sources used.

طلب عرض سعر اتصل بنا
STM32F411VCT6 - 100MHz Cortex-M4 MCU | STMicroelectronics
STM32F411VCT6

STM32F411VCT6 - 100MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F411VCT6 is a 32-bit ARM Cortex-M4 microcontroller with floating-point unit, operating up to 100 MHz, with 256 KB Flash and 100-LQFP (14x14) packaging. It belongs to the STM32F4 series and targets embedded control, communications, sensor, audio, and USB applications. A microcontroller is a semiconductor device that integrates a processor core, memory, peripherals, and communication interfaces into one compact component. The STM32 family uses Arm Cortex-M cores within a broader embedded-processing hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor. The Cortex-M4 core provides 32-bit processing with hardware floating-point support, enabling efficient control-loop and signal-processing tasks while keeping system complexity manageable. Verified distributor and manufacturer information identify the STM32F411VCT6 as an STM32F4-series device based on the high-performance Arm Cortex-M4 32-bit RISC core, with a maximum frequency of 100 MHz and 256 KB Flash. The exact SRAM size, operating-voltage range, GPIO count, ADC ratings, timer count, USB details, and package dimensions were not supplied in the verified data for this record and are therefore identified as data-needed items rather than inferred. The 100-LQFP (14x14) package supports a conventional surface-mount PCB layout and provides a defined lead arrangement for mixed-signal, control, and embedded communication designs. An LQFP package can be visually inspected after soldering and is generally compatible with automated assembly, although final land-pattern selection must follow the manufacturer package drawing rather than an inferred footprint. Typical STM32F411 applications include USB-connected control systems, industrial sensor nodes, motor and motion-control controllers, consumer accessories, audio interfaces, and compact embedded instruments. The Cortex-M4F architecture is useful where the system benefits from higher arithmetic performance than a basic Cortex-M0 or Cortex-M3 design, especially for filtering, control calculations, and protocol handling. Designers should confirm pin multiplexing, clock configuration, memory-map compatibility, firmware support, and peripheral electrical limits in the manufacturer documentation before publishing a PCB or production firmware image. This page combines verified manufacturer and distributor information with structured application guidance, sourcing questions, and clearly marked data gaps; it does not invent specifications that were absent from the supplied sources.

طلب عرض سعر اتصل بنا
STM32F411VCT6TR - 100MHz Cortex-M4 256KB MCU | STMicroelectronics
STM32F411VCT6TR

STM32F411VCT6TR - 100MHz Cortex-M4 256KB MCU | STMicroelectronics

The STMicroelectronics STM32F411VCT6TR is an Arm Cortex-M4 32-bit RISC microcontroller IC with a 100 MHz maximum operating frequency, 256KB flash memory, and a 100-LQFP 14x14 mm package. It is the tape-and-reel orderable STM32F411VC variant identified by the T6TR suffix. The supplied distributor data describes this device as an STM32F4-series member and confirms its Cortex-M4 core, flash capacity, and package. A microcontroller is an embedded-system semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and interface circuitry into one device. The STM32F411 belongs to the STM32F4 family and targets compact embedded products that need real-time control, serial communications, data acquisition, and moderate processing performance. Its architecture follows the Arm Cortex-M class: microcontroller -> embedded processor -> RISC core -> STM32 MCU. The principal verified characteristics are a 32-bit Arm Cortex-M4 core, operation up to 100 MHz, and 256KB of flash. Distributor records also associate this access-line device with DSP and FPU capability. The 100-LQFP package provides 100 lead positions and is suitable for automated board assembly, but its relatively large body and lead pitch demand careful PCB fanout and assembly planning. Communication and control capability must be evaluated from the manufacturer datasheet for the exact ordering code. The supplied results mention the STM32F411 family and its Cortex-M4 performance but do not provide verified peripheral counts, RAM size, supply limits, GPIO count, timer count, ADC characteristics, USB configuration, or package dimensions. Those values are therefore not inferred here. This distinction is important because generic STM32F411 listings may combine information from different flash-density variants. Typical product concepts include USB-connected data acquisition, industrial control modules, sensor hubs, compact consumer devices, communications equipment, and real-time embedded accessories. The 100 MHz Cortex-M4 core provides useful control headroom, while 256KB flash constrains firmware and asset storage. Firmware selection, boot configuration, clock setup, pin multiplexing, and peripheral assignments should be validated against the official STM32F411xC/xE documentation. A key design consideration is supply decoupling and clock integrity. Place required bypass capacitors close to the corresponding power pins, keep high-current return paths compact, and provide clean layout for external oscillators when used. Confirm all 100 package terminals and board-land-pattern details against the official documentation before PCB release rather than relying on distributor pin diagrams alone. This page combines exact distributor identifiers, current commercial data, family-level specifications, and engineering guidance. It intentionally distinguishes verified facts from unavailable details, helping engineers identify the correct MCU, assess procurement options, and determine whether a candidate replacement truly preserves the package, memory, and software requirements.

طلب عرض سعر اتصل بنا
STM32F411VEH6 - 100MHz Arm Cortex-M4 MCU | STMicroelectronics
STM32F411VEH6

STM32F411VEH6 - 100MHz Arm Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F411VEH6 is an Arm Cortex-M4 32-bit microcontroller with FPU and DSP support, operating up to 100 MHz, with 512 KB of Flash and 128 KB of SRAM in a 100-UFBGA package. It combines high processing performance with USB OTG FS connectivity in a compact 7 x 7 mm surface-mount package. A microcontroller is a programmable integrated circuit that combines a processor core, memory, peripherals, and interfaces on one device. The STM32F4 family belongs to the Arm Cortex-M4 MCU, embedded-controller, embedded-processing, and semiconductor hierarchies. It is commonly used where deterministic control, communications, data acquisition, and compact local processing must share one platform. Verified headline features include an Arm Cortex-M4 core with FPU, 125 DMIPS performance, 512 KB Flash, 128 KB RAM, and USB OTG FS. These resources support control loops, protocol handling, signal processing, and USB-connected peripherals. The 100-UFBGA package reduces PCB footprint, although its fine pitch and exposed thermal array require careful assembly and thermal design. The STM32F411xC/xE family provides a practical balance of performance, memory, and integration for compact embedded systems. Its 100 MHz Cortex-M4 core can execute floating-point and DSP instructions, reducing the need for external computation in audio, instrumentation, industrial control, and USB-connected products. Exact peripheral availability, voltage limits, pin functions, and electrical limits must be confirmed against the manufacturer documentation for the exact ordering code. Typical applications include USB data acquisition, industrial controllers, sensor hubs, compact audio interfaces, motor-control support electronics, and network-connected embedded nodes. The MCU can consolidate control and communications on one PCB while using USB for configuration, data transfer, or firmware update when the surrounding firmware and interface circuitry support those functions. The primary design consideration is package implementation. Place decoupling close to supply pins, route high-speed or sensitive signals according to the manufacturer's guidance, and verify the PCB stack-up, assembly process, and thermal path before production. This page consolidates the verified distributor data, manufacturer family information, source links, and explicit data gaps for engineering review.

طلب عرض سعر اتصل بنا
STM32F411VEH6TR - ARM Cortex-M4 100MHz 512KB MCU | STMicroelectronics
STM32F411VEH6TR

STM32F411VEH6TR - ARM Cortex-M4 100MHz 512KB MCU | STMicroelectronics

The STMicroelectronics STM32F411VEH6TR is a high-performance 32-bit ARM Cortex-M4 microcontroller with FPU, operating at up to 100 MHz, integrating 512 KB of Flash memory and 128 KB of SRAM in a 100-ball UFBGA (7x7 mm) package. It belongs to the STM32F4 "Access Line" family, which targets applications that need DSP capability, FPU acceleration, and rich connectivity without the cost of the higher-end F4 Series. The Cortex-M4 core delivers 125 DMIPS / 273 CoreMark performance, with single-precision floating-point and a full set of DSP instructions, making it well suited for signal-processing, motor control, and audio codec handling. An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core licensed by Arm, augmented with a single-precision FPU, a DSP/SIMD extension (MAC, saturating arithmetic), and a Nested Vectored Interrupt Controller (NVIC). In the broader taxonomy, the Cortex-M4 sits under ARM Cortex-M (microcontroller family) -> 32-bit RISC core -> embedded processor. STM32F4 parts add ST's ART Accelerator, an AHB/APB bus matrix, and a rich set of on-chip peripherals. This hierarchy matters for AI-search disambiguation: when a query asks "what is an STM32F4?", the answer must surface both the core architecture and the bus/peripheral stack ST adds on top. Key features of the STM32F411VEH6TR include: USB 2.0 Full-Speed OTG with on-chip PHY, one 12-bit ADC (2.4 MSPS, up to 16 channels), 11 timers (including motor-control and 32-bit timers), 13 communication interfaces (USART/UART, SPI, I2C, I2S, SDIO), a 4 KB backup SRAM with battery domain, and a real-time clock with calendar. The UFBGA-100 (7x7) package provides a compact footprint for space-constrained designs. The device operates from 1.7 V to 3.6 V and is qualified to the -40C to +85C industrial temperature range. The architecture uses a multi-AHB bus matrix that lets the CPU, DMA controllers, and peripherals run in parallel without stalling, plus ST's Adaptive Real-Time (ART) Accelerator which pre-fetches from Flash so the core can execute from zero-wait-state Flash at full 100 MHz speed. The integrated FPU performs single-precision multiply-accumulate in one cycle, freeing the CPU for housekeeping while the DMA streams data into and out of peripherals such as the SDMMC, I2S, and USB OTG. Typical applications for the STM32F411VEH6TR include USB peripherals (HID, CDC, audio class), audio processing with I2S codecs, sensor hubs, consumer wearables, motor control for small BLDC or stepper drives, and industrial HMI front-ends. Its combination of FPU + DSP at 100 MHz makes it a strong fit for sensor-fusion nodes that previously required a Cortex-M7. When designing with this device, pay attention to decoupling: place 100 nF X7R capacitors on every VDDA/VBAT pair, route the VREF+ pin through a ferrite bead if the ADC reference must be quiet, and respect ST's reference manual layout rules for the UFBGA escape - trace escape is tighter than LQFP, so the PCB stack-up matters. The boot pins (BOOT0) determine Flash vs. System memory boot; strap them carefully during reset. This page synthesizes distributor pricing, drop-in and pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone.

طلب عرض سعر اتصل بنا
STM32F411VEH6U - 100MHz Cortex-M4 MCU 512KB Flash | STMicroelectronics
STM32F411VEH6U

STM32F411VEH6U - 100MHz Cortex-M4 MCU 512KB Flash | STMicroelectronics

The STMicroelectronics STM32F411VEH6U is a high-performance ARM Cortex-M4 microcontroller with FPU, operating at up to 100 MHz and delivering 125 DMIPS, housed in a 100-ball UFBGA (7x7 mm) package. The device integrates 512 KB of Flash memory and 128 KB of SRAM, providing ample headroom for application code, protocol stacks, and data buffering in space-constrained embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The ARM Cortex-M4 core specifically adds a single-precision floating-point unit and DSP instructions, making MCUs of this class suitable for signal-processing tasks that earlier Cortex-M0/M3 devices handled less efficiently. Within the broader hierarchy, this part is an MCU -> embedded processor -> semiconductor -> integrated circuit. The STM32F411 family sits in the upper-performance tier of ST's mainstream STM32F4 line, balancing DSP capability, peripheral variety, and power efficiency. Key features of the STM32F411VEH6U include USB OTG Full-Speed, one 12-bit ADC (2.4 MSPS), up to 11 timers (including motor-control PWM), and 13 communication interfaces covering SPI, I2C, USART, USB, and CAN. The ART Accelerator with prefetch buffer enables 0-wait-state execution from Flash at full 100 MHz, sustaining 125 DMIPS of compute throughput. The integrated FPU and DSP SIMD instructions accelerate audio codec handling, motor-control loops, and sensor-fusion math. Typical applications include consumer audio (USB headsets, headphone amplifiers driven by I2S), home appliances with TFT displays (touchscreen HMI controllers), industrial motor control (BLDC and PMSM drives below 1 kW), and USB-connected embedded peripherals such as data loggers and POS terminals. The compact UFBGA-100 footprint (7x7 mm) suits small-form-factor boards where a land-grid array improves routing density versus TQFP alternatives. When designing with this part, leverage the STM32Cube ecosystem for code generation, middleware, and pin-mux configuration. Ensure UFBGA routing escapes are planned early - the 0.65 mm pitch requires microvia or HDI PCB processes.

طلب عرض سعر اتصل بنا
STM32F411VET6 - 100MHz 512KB MCU | STMicroelectronics
STM32F411VET6

STM32F411VET6 - 100MHz 512KB MCU | STMicroelectronics

The STMicroelectronics STM32F411VET6 is a 32-bit ARM Cortex-M4 microcontroller with FPU operating up to 100 MHz, 512 KB of Flash memory, 128 KB of RAM, and a 100-pin LQFP package. It is designed for embedded applications requiring efficient real-time control, USB connectivity, analog measurement, and extensive peripheral integration. An ARM Cortex-M4 microcontroller is a reduced-instruction-set processor core used in embedded control systems. It combines digital processing, memory, communication interfaces, timers, and analog peripherals on one device. Within the STM32F4 series, the STM32F411VET6 provides a balance of processing performance, memory capacity, low-power operation, and connectivity for compact industrial, medical, consumer, and communications equipment. The verified product information identifies a 1.7 V to 3.6 V power-supply range, operation from -40 °C to 85 °C or the wider temperature variants stated in the source data, and up to 100 MHz core frequency. The device is listed with 512 KB Flash, 128 KB RAM, USB OTG FS, 11 timers, one ADC, and 13 communication interfaces. These features support control loops, sensor acquisition, data logging, USB-connected peripherals, and human-interface systems. The STM32F4 architecture uses an ARM Cortex-M4 core with hardware floating-point support, helping accelerate numerical and signal-processing workloads. Its integrated peripherals reduce the need for external components in connected embedded products. The USB OTG FS interface is useful for USB device or host implementations, while the ADC supports analog signal acquisition where system-level accuracy and reference design still require validation. Typical applications include industrial monitoring, medical instrumentation, USB data acquisition, sensor hubs, motor and motion-control subsystems, consumer devices, and embedded communications equipment. The LQFP-100 package provides a practical choice for prototypes and designs requiring a broad pin count and easy visual inspection during assembly. Designers should verify the exact pin functions, alternate-function mappings, clock tree, decoupling requirements, and package-specific recommendations against the manufacturer datasheet. For battery-powered systems, low-power mode selection and peripheral clock gating can reduce energy use. For USB or high-speed signal paths, controlled impedance, short routing, clean return paths, and careful grounding are important. This page combines verified manufacturer and distributor data with practical application guidance, parameter comparisons, and engineering considerations that are not limited to a raw distributor specification table.

طلب عرض سعر اتصل بنا
STM32F411VET6TR - 100MHz Cortex-M4 MCU 512KB Flash | STMicroelectronics
STM32F411VET6TR

STM32F411VET6TR - 100MHz Cortex-M4 MCU 512KB Flash | STMicroelectronics

The STMicroelectronics STM32F411VET6TR is a 32-bit ARM Cortex-M4 microcontroller with FPU and DSP instructions, running at up to 100 MHz, integrating 512 KB of Flash and 128 KB of SRAM in a 100-pin LQFP (14x14 mm) package. The device operates from a 1.7 V to 3.6 V supply across -40 C to +85/105/125 C temperature grades and belongs to the Dynamic Efficiency Line with Batch Acquisition Mode (BAM) for energy-aware designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals such as timers, ADCs, communication controllers, and GPIOs. The STM32F411 sits in the Cortex-M4 -> ARM Cortex-M family -> 32-bit RISC microcontroller hierarchy, designed for deterministic real-time control with hardware floating-point acceleration and DSP extensions, which makes it well suited to motor control, audio processing, and signal-chain conditioning where 8/16-bit MCUs lack the headroom. Key features of the STM32F411VET6TR include 125 DMIPS / 273 CoreMark performance, an ART Accelerator with 8 KB instruction cache that delivers near-zero-wait-state execution from Flash, a USB 2.0 OTG Full-Speed controller with on-chip PHY, and an SDMMC interface. The analog subsystem integrates three 12-bit 2.4 MSPS ADCs, two 12-bit DACs, and a buffered reference. Communication peripherals cover up to three USART, two UART, three SPI, two I2C, one CAN 2.0B, plus an external memory bus for SRAM/NOR/NAND. The 100-LQFP package exposes 81 GPIO for flexible system integration. Architecturally, the STM32F411 uses a multi-AHB bus matrix (DCODE, SYSTEM, DMA1, DMA2) with two seven-channel DMAs to keep peripheral and CPU traffic parallelized, and a Cortex-M4 core with single-precision FPU, MPU, and NVIC for hardware-prioritized interrupts. Power gating through the integrated PVD, low-power Run, Sleep, Stop, and Standby modes is coordinated by the RCC and PWR blocks to support battery-powered end products. Typical applications include USB HID/CDC devices, sensor fusion nodes, audio front ends (USB microphone, USB headphone), digital power conversion, drones, gaming controllers, and human-machine interface (HMI) modules. The 100 MHz Cortex-M4 with hardware FPU also makes it a frequent choice for CNC pre-processors and industrial gateways requiring deterministic wired connectivity. When designing with this device, route the VDD/VDDA pins through a star topology with separate 100 nF + 4.7 uF decoupling at each pin, and tie BOOT0 to ground via 10 kOhm for normal boot from Flash. The 100-LQFP requires thermal relief and proper copper pour for the 81 GPIO to keep switching noise out of the analog domain. This page synthesizes distributor pricing, drop-in alternatives in the same 100-LQFP footprint, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا
STM32F411VET6U - 100MHz Cortex-M4 512KB MCU | STMicroelectronics
STM32F411VET6U

STM32F411VET6U - 100MHz Cortex-M4 512KB MCU | STMicroelectronics

The STMicroelectronics STM32F411VET6U is an ARM Cortex-M4 32-bit microcontroller with floating-point unit, 512 KB of Flash memory, 128 KB of SRAM, and a maximum CPU frequency of 100 MHz, supplied in a 100-pin LQFP package. The verified family data specifies operation from a 1.7 V to 3.6 V power supply and temperature grades covering 40°C to 85/105/125°C. A microcontroller integrates a processor core, memory, programmable peripherals, and interface controllers into one semiconductor. The STM32F411 belongs to the STM32F4 microcontroller family and the broader ARM Cortex-M embedded ecosystem. Its Cortex-M4 architecture provides deterministic control performance and single-precision floating-point capability for protocols, signal processing, industrial controls, and connected products. The STM32F411VET6U combines 512 K x 8 Flash storage with 128 KB of SRAM and a stated performance of 125 DMIPS. Verified family data also identifies USB OTG full-speed support. These resources suit applications that need moderate local storage, real-time peripheral handling, and USB connectivity without an external host controller. The exact list of peripheral functions, clock limits, and electrical characteristics should be confirmed in the manufacturer documentation for the ordered ordering code. Its 100-pin LQFP package provides a larger pin count than compact 48-pin devices, supporting a broader connection to external sensors, memories, converters, displays, and communication transceivers. The package increases routing flexibility but requires careful fanout, ground distribution, and decoupling. Because STM32F411 variants can differ by temperature range and order code, firmware and hardware validation must use the exact STM32F411VET6U documentation rather than assuming that every STM32F411 suffix is interchangeable. Typical uses include USB-connected data acquisition, industrial control modules, medical instrumentation, audio and communications equipment, and compact embedded gateways. The ARM Cortex-M4 core, 128 KB SRAM, and USB capability are especially useful when a product must combine control-loop responsiveness with moderate protocol and data-processing workloads. Designers should preserve the manufacturer's recommended power, decoupling, clock, and reset arrangements. USB differential routing requires controlled impedance and uninterrupted reference-plane continuity, while high-speed or sensitive analog signals need separate return paths. Firmware should also account for boot configuration, peripheral pin multiplexing, and the exact package pinout before PCB release. This page combines verified family specifications, sourcing links, practical integration guidance, and explicitly marked data gaps. It does not infer electrical limits, pricing, compliance status, or pin assignments that were absent from the supplied source data.

طلب عرض سعر اتصل بنا
STM32F412CEU6 - 100MHz ARM Cortex-M4F MCU, 512KB Flash | STMicroelectronics
STM32F412CEU6

STM32F412CEU6 - 100MHz ARM Cortex-M4F MCU, 512KB Flash | STMicroelectronics

The STM32F412CEU6 is a high-performance ARM Cortex-M4F based microcontroller from STMicroelectronics, operating at up to 100 MHz with 512 KB of flash memory and 128 KB of SRAM. It is housed in a compact UFQFPN-48 (7x7 mm) package, making it suitable for space-constrained applications requiring advanced processing and rich connectivity. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals on a single chip. The STM32F412CEU6 belongs to the STM32F4 series, which is part of the broader STM32 family of 32-bit flash microcontrollers based on the ARM Cortex-M processor. This hierarchy places it within the embedded processing domain, where it serves as the central control unit for a wide range of electronic devices. Key features include a 100 MHz ARM Cortex-M4F core with DSP instructions and a floating-point unit (FPU), enabling efficient signal processing and mathematical computations. The device offers a rich set of peripherals: multiple USARTs, SPIs, I2Cs, a full-speed USB 2.0 OTG, a 12-bit ADC with up to 16 channels, a 12-bit DAC, advanced timers, and a true random number generator (RNG). It also supports external memory interfaces via FSMC, allowing expansion of memory beyond the internal flash and SRAM. Technically, the STM32F412CEU6 is fabricated using a 90nm process technology, providing a balance between performance and power consumption. It operates from a 1.7V to 3.6V supply, with multiple low-power modes (Sleep, Stop, Standby) to optimize energy efficiency. The device includes a nested vectored interrupt controller (NVIC) for efficient interrupt handling, and a memory protection unit (MPU) for enhanced application security. Typical applications include industrial control systems, motor drives, consumer electronics, IoT gateways, and audio processing. Its combination of processing power, connectivity, and low-power modes makes it ideal for battery-powered devices and real-time control applications. For instance, in an IoT gateway, the STM32F412CEU6 can manage sensor data acquisition, run communication protocols, and interface with cloud services via its USB and UART interfaces. When designing with this MCU, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to each VDD pin, and a 4.7uF bulk capacitor. The VDDA pin should be connected to a clean analog supply, and the VREF+ pin to a stable reference voltage for accurate ADC conversions. Also, configure the boot pins correctly to select the desired boot mode (flash, system memory, or SRAM) during development.

USD $4.16 اتصل بنا