المنتجات (46,000+)

STM32F417VET6 - 168MHz Cortex-M4 MCU | STMicroelectronics
STM32F417VET6

STM32F417VET6 - 168MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F417VET6 is a 32-bit Arm Cortex-M4 microcontroller with a 168 MHz operating frequency, 512 KB of flash memory, and 192 KB of SRAM in a 100-pin LQFP package measuring 14 x 14 mm. It combines a floating-point unit, DSP instructions, hardware cryptographic acceleration, and communication peripherals for demanding embedded-control and connected systems. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor commonly used for real-time control, human-machine interfaces, communications, and signal processing. The STM32F4 series combines the Cortex-M4 core with high-speed memory, timers, analog resources, and interfaces such as Ethernet, USB, and CAN. This hierarchy places the device within embedded processing while providing dedicated hardware for industrial, networking, and multimedia applications. The STM32F417VET6 operates at up to 168 MHz and is advertised at 210 DMIPS. Its 512 KB internal flash supports firmware and application code, while 192 KB of SRAM accommodates working memory, buffers, and networking data. Hardware cryptographic acceleration improves the practicality of secure firmware and encrypted communication, while the floating-point unit and DSP support accelerate numerical and control workloads without requiring a separate processor. Communication capabilities include Ethernet, USB OTG full-speed and high-speed, CAN, and a camera interface. These interfaces make the MCU suitable for gateways, industrial controllers, data acquisition systems, USB peripherals, and embedded network equipment. The LQFP-100 package provides a high pin count for external memory, sensor, actuator, and mixed-signal connectivity while remaining compatible with conventional leaded PCB assembly processes. Typical applications include industrial automation, motor and servo control, industrial Ethernet gateways, USB-connected test equipment, secure embedded gateways, camera-based vision controllers, and networked sensors. The combination of 168 MHz processing, 192 KB SRAM, and hardware security acceleration allows real-time control and communications functions to coexist in a single device. PCB design should follow the manufacturer’s LQFP-100 pinout, power, decoupling, clock, and programming recommendations. Pay particular attention to supply-voltage tolerance, analog input limits, boot configuration, oscillator placement, and exposed I/O constraints before finalizing the board layout. This product reference combines the manufacturer’s device positioning with package, memory, interface, replacement, and design guidance. It also distinguishes temperature-grade and order-code options so engineers can assess mechanical, procurement, and firmware continuity before making a drop-in decision.

طلب عرض سعر اتصل بنا
STM32F417VGT6 - 32-bit ARM Cortex-M4F MCU, 1MB Flash | STMicroelectronics
STM32F417VGT6

STM32F417VGT6 - 32-bit ARM Cortex-M4F MCU, 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F417VGT6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M4F core with floating-point unit (FPU), operating at up to 168 MHz. It integrates 1 MB of flash memory and 192 KB of SRAM, making it suitable for complex embedded applications requiring substantial code and data storage. The device is housed in a 100-pin LQFP100 package, offering a rich set of peripherals including advanced connectivity, analog, and control interfaces. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals. The STM32F417VGT6 belongs to the STM32F4 series, which is part of the broader STM32 family of 32-bit flash microcontrollers. This family is widely used in industrial, consumer, and automotive applications due to its balance of performance, power efficiency, and peripheral integration. Key features of the STM32F417VGT6 include a 168 MHz CPU with DSP instructions and a floating-point unit, 1 MB of flash memory, 192 KB of SRAM, and a comprehensive set of peripherals: 3x 12-bit ADCs, 2x DACs, 12x general-purpose timers, 2x advanced-control timers, and a true random number generator (RNG). It also features a camera interface, crypto/hash processor, and a USB OTG HS/FS, Ethernet MAC, and CAN 2.0B interfaces. The device supports a wide supply voltage range of 1.8V to 3.6V and operates over a temperature range of -40°C to +85°C. The STM32F417VGT6 is built on a 90nm process technology, enabling high clock speeds with low power consumption. The ART Accelerator™ allows zero-wait-state execution from flash memory, maximizing performance. The FPU accelerates mathematical computations, which is critical for real-time control and signal processing applications. The device also includes a memory protection unit (MPU) and a nested vectored interrupt controller (NVIC) for efficient multitasking. Typical applications include industrial motor control, medical equipment, consumer electronics, IoT gateways, and audio processing. The combination of high-speed ADC, advanced timers, and communication interfaces makes it ideal for applications requiring precise timing and connectivity. For example, in motor control, the advanced-control timers generate PWM signals with dead-time insertion, while the ADC samples current and voltage feedback for closed-loop control. When designing with this device, ensure adequate decoupling of the power supply pins and proper layout of the high-speed USB and Ethernet interfaces. The device supports multiple low-power modes, including Sleep, Stop, and Standby, which can be leveraged to reduce power consumption in battery-powered applications. The boot configuration pins must be set correctly to select the desired boot source (flash, SRAM, or system memory).

طلب عرض سعر اتصل بنا
STM32F417ZET6 - 168MHz Cortex-M4 512KB MCU | STMicroelectronics
STM32F417ZET6

STM32F417ZET6 - 168MHz Cortex-M4 512KB MCU | STMicroelectronics

The STMicroelectronics STM32F417ZET6 is a 32-bit Arm Cortex-M4 microcontroller with a 168 MHz operating frequency, 512 KB of Flash memory, and 192 KB of SRAM in a 144-pin LQFP package. It is designed for embedded applications that require substantial processing performance, generous local memory, and extensive peripheral connectivity. The device operates from 2.5 V or 3.3 V according to its ordering information. A microcontroller is a programmable semiconductor that integrates a processor core, memory, clock circuitry, and peripherals into one device. The STM32F417 belongs to the STM32F4 microcontroller family, combining real-time control capability with a high-performance Arm Cortex-M4 core. This places it within the embedded processor and semiconductor hierarchy used in industrial controls, communications equipment, consumer products, and data-acquisition systems. The Cortex-M4 core includes a single-precision floating-point unit and DSP instruction support. These features improve calculation-heavy control loops, signal processing, and digital filtering compared with a core lacking dedicated arithmetic hardware. Its 512 KB Flash provides room for application code, boot routines, configuration data, and firmware updates, while 192 KB of SRAM supports working memory, buffers, and real-time control tasks. The STM32F417ZET6 is supplied in a 144-pin LQFP package, providing a large pin count for external memory, communication interfaces, analog inputs, timers, and general-purpose I/O. Its 168 MHz operating frequency supports responsive multitasking and control workloads. The family documentation identifies operation up to 168 MHz and the Cortex-M4 architecture as the principal performance characteristics of the STM32F415xx and STM32F417xx devices. Typical uses include industrial automation controllers, motor-control equipment, communications gateways, test and measurement instruments, and embedded gateways. The large LQFP footprint is especially useful when a design requires numerous mixed-signal and digital functions, extensive peripheral access, or a component that can be assembled using conventional leaded-package inspection methods. Hardware design should preserve clean supply distribution, stable clocking, and appropriate decoupling around the power pins. Firmware migration must also account for peripheral configuration, pin multiplexing, memory organization, and device-specific startup routines. The STM32F417ZET6 designation identifies a precise combination of Flash capacity, temperature grade, package, and ordering code that must be preserved during substitution. This page combines manufacturer specifications, package and pinout guidance, drop-in replacement analysis, application-focused engineering notes, and structured comparisons. It is intended to help designers verify electrical compatibility, tooling, firmware dependencies, and PCB reuse before committing to the STM32F417ZET6 or approving a substitute.

طلب عرض سعر اتصل بنا
STM32F417ZGT6 - ARM Cortex-M4F MCU 1MB Flash 168MHz | STMicroelectronics
STM32F417ZGT6

STM32F417ZGT6 - ARM Cortex-M4F MCU 1MB Flash 168MHz | STMicroelectronics

The STMicroelectronics STM32F417ZGT6 is a high-performance ARM Cortex-M4F based microcontroller with floating-point unit (FPU) operating at up to 168 MHz. It features 1 MB of Flash memory and 192 KB of SRAM, making it suitable for complex embedded applications requiring significant code and data storage. The device is housed in a 144-pin LQFP package (LQFP144) with a 20x20 mm body and 0.5 mm pitch, providing ample I/O for peripheral-rich designs. What is an ARM Cortex-M4F microcontroller? It is a 32-bit processor core designed for embedded systems, combining the efficiency of the Cortex-M4 with a hardware floating-point unit (FPU) that accelerates single-precision math operations. This makes it ideal for digital signal processing (DSP) and control applications. In the system hierarchy, the STM32F417ZGT6 sits at the application processor level, integrating memory, clocking, and a rich set of peripherals on a single chip, reducing system cost and board space. Key features include a 168 MHz maximum clock speed, 1 MB Flash, 192 KB SRAM, and a comprehensive set of peripherals: 3x 12-bit ADCs (2.4 MSPS), 2x DACs, 12-bit DAC, 2x I2C, 3x SPI, 4x USART, 2x UART, 2x CAN, 1x USB 2.0 OTG FS/HS, 1x Ethernet MAC, 1x camera interface, and a true random number generator (RNG). The FPU accelerates control algorithms and audio processing. The device also includes a memory protection unit (MPU) and a cryptographic acceleration cell for AES, DES, and 3DES. Technically, the STM32F417ZGT6 is built on a 90nm process, offering a balance of performance and power consumption. It operates from 1.8V to 3.6V supply, with a wide temperature range of -40°C to +85°C (industrial grade). The device supports various low-power modes (Sleep, Stop, Standby) to optimize energy consumption in battery-powered applications. The advanced nested vectored interrupt controller (NVIC) ensures low-latency interrupt handling, critical for real-time control. Typical applications include industrial motor control, medical devices, consumer electronics, IoT gateways, and audio processing. The Ethernet MAC and USB OTG enable connectivity, while the FPU and DSP instructions make it suitable for real-time audio and vibration analysis. The camera interface supports image capture for vision-based systems. When designing with this MCU, ensure adequate decoupling on the VDD pins and a clean analog supply for the ADC. The internal RC oscillator is sufficient for many applications, but an external crystal is recommended for precise timing. The boot pins must be configured correctly to select the boot source (Flash, SRAM, or system memory).

طلب عرض سعر اتصل بنا
STM32F423VHT6 - 100MHz Cortex-M4 MCU, 1.5MB Flash | STMicroelectronics
STM32F423VHT6

STM32F423VHT6 - 100MHz Cortex-M4 MCU, 1.5MB Flash | STMicroelectronics

The STMicroelectronics STM32F423VHT6 is a 32-bit ARM Cortex-M4 microcontroller operating at up to 100 MHz, with 1.5 MB of Flash memory and a 100-pin LQFP package measuring 14 x 14 mm. It is designed for embedded applications requiring high-performance control, digital signal processing, and floating-point support. A microcontroller is a programmable semiconductor device that integrates a processor core, memory, and peripherals into one compact component. The STM32F4 series belongs to the broader embedded-processing and microcontroller hierarchy, combining real-time control with dedicated hardware for communications, analog conversion, timers, and external data storage. The STM32F423VHT6 combines a 100 MHz Arm Cortex-M4 core with 1.5 MB of Flash and an ART Accelerator according to the product listing. Its high-performance access-line positioning makes it suitable for industrial control, embedded instrumentation, communications equipment, and applications requiring substantial code storage and real-time processing. The device is identified as a 1.5 MByte Flash, 100 MHz, 32-bit RISC microcontroller. The listing also identifies DSP and FPU capabilities, which are valuable for filtering, control algorithms, and other mathematically intensive workloads. Detailed RAM capacity, peripheral inventory, voltage limits, and electrical characteristics should be confirmed in the manufacturer datasheet before a design is released. Typical applications include industrial automation modules, motor and motion-control equipment, communications gateways, test and measurement systems, and consumer or embedded control platforms. The 100-pin LQFP package exposes substantially more I/O than smaller 32-pin or 48-pin devices, making the part suitable for systems that need multiple communications interfaces, timer channels, analog inputs, and digital signals. When laying out a PCB, use the manufacturer's pinout and land-pattern guidance exactly. Pay particular attention to power, ground, decoupling, oscillator, reset, and boot-configuration pins. This page provides a verified product overview, structured alternatives, and purchasing guidance for engineers evaluating the STM32F423VHT6.

طلب عرض سعر اتصل بنا
STM32F423ZHT6 - 100MHz Cortex-M4 1.5MB MCU | STMicroelectronics
STM32F423ZHT6

STM32F423ZHT6 - 100MHz Cortex-M4 1.5MB MCU | STMicroelectronics

The STMicroelectronics STM32F423ZHT6 is a 32-bit ARM Cortex-M4 microcontroller operating at up to 100 MHz, with 1.5 MB of Flash memory and a 144-pin LQFP package measuring 20 x 20 mm. It combines the MCU role with a DSP and FPU, making it suitable for embedded control, signal processing, communications, and data-acquisition equipment that requires a broad pin count and substantial onboard program memory. An ARM Cortex-M4 microcontroller is a 32-bit RISC processor designed for embedded systems. The STM32F423ZHT6 belongs to the STM32F4 family, combining processor performance with integrated memory, communication peripherals, timers, and GPIO. Its hierarchy extends from the Cortex-M4 core to an ARM Cortex-M microcontroller, then to a general-purpose microprocessor and embedded semiconductor. The device operates at up to 100 MHz and includes 1.5 MB of Flash memory. The 144-LQFP package provides a substantial number of external connections for sensors, actuators, communications, and mixed-signal interfaces. The T6 temperature and package suffix identifies the ordering variant, while the ZH family designation corresponds to the high-pin-count, 1.5 MB Flash configuration. The Cortex-M4 architecture supports efficient digital signal-processing instructions and a single-precision floating-point unit. These capabilities are useful for filtering, control algorithms, communications protocol handling, and real-time computations without requiring a separate DSP. The combination of 100 MHz processing, 1.5 MB Flash, and a large package also makes the MCU suitable for gateways and embedded controllers with several external interfaces. Typical applications include industrial automation, sensor aggregation, motor and motion control, communications equipment, medical instrumentation, and consumer equipment requiring multiple peripheral connections. Its large LQFP footprint makes assembly easier to inspect and rework than a fine-pitch ball-grid-array package, although the 144 leads require careful PCB layout and adequate spacing between high-speed and sensitive signals. Power-supply design should preserve a clean 3.3 V rail and follow the manufacturer’s decoupling and pin-description guidance. Place bypass capacitors close to the appropriate supply pins, maintain short return paths, and use the package pin-description table when assigning tracks. Firmware reuse should also be checked because peripheral availability, interrupt assignments, and device features can vary within the STM32F4 family. This page combines the verified 100 MHz Cortex-M4 performance, 1.5 MB Flash configuration, 144-LQFP packaging, structured alternatives, interface-focused applications, and practical PCB guidance. It also distinguishes confirmed product attributes from parameters that require direct confirmation in the manufacturer documentation.

طلب عرض سعر اتصل بنا
STM32F427IGH6 - 180MHz ARM Cortex-M4 MCU, 2MB Flash | STMicroelectronics
STM32F427IGH6

STM32F427IGH6 - 180MHz ARM Cortex-M4 MCU, 2MB Flash | STMicroelectronics

The STMicroelectronics STM32F427IGH6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M4 core with FPU, operating at up to 180 MHz. It features 2 MB of Flash memory and 256 KB of SRAM, making it suitable for complex applications requiring substantial code and data storage. The device is housed in a 176-pin UFBGA package (BGA176) with a 10x10 mm footprint, offering a compact solution for space-constrained designs. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the backbone of embedded systems, ranging from simple household appliances to complex industrial automation. The STM32F427IGH6 belongs to the STM32F4 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers. This hierarchy places it within the embedded processing domain, where it competes with other high-performance MCUs from NXP, Renesas, and Microchip. Key features of the STM32F427IGH6 include a 180 MHz ARM Cortex-M4 core with single-precision FPU, 2 MB of dual-bank Flash memory, 256 KB of SRAM, and a comprehensive set of peripherals. It supports a wide range of communication interfaces including 4 USARTs, 4 UARTs, 6 SPIs, 3 I2Cs, 2 CANs, 1 SDIO, 1 USB 2.0 OTG FS/HS, and 1 Ethernet MAC. The device also integrates advanced analog peripherals: 3 12-bit ADCs with up to 24 channels, 2 12-bit DACs, and multiple timers including 2 advanced-control timers, 10 general-purpose timers, and 2 basic timers. The Chrom-ART Accelerator (DMA2D) and true random number generator (RNG) enhance graphics and security capabilities. Technically, the STM32F427IGH6 is built on a 90nm process technology, enabling high clock speeds with low power consumption. It operates from a 1.7V to 3.6V power supply and features multiple low-power modes (Sleep, Stop, Standby) to optimize energy efficiency. The device includes a memory protection unit (MPU), a 12-channel DMA controller, and a flexible static memory controller (FSMC) supporting external memory interfaces. The dual-bank Flash allows read-while-write operations, enabling firmware updates without halting the system. Typical applications include industrial control systems, motor drives, medical devices, consumer electronics, and IoT gateways. The high processing power and rich peripheral set make it ideal for applications requiring real-time control, signal processing, and connectivity. For instance, in industrial automation, the STM32F427IGH6 can manage multiple communication protocols simultaneously while executing complex control algorithms. When designing with this device, ensure adequate decoupling capacitors (100nF and 4.7uF) are placed close to the power pins. The BGA package requires careful PCB layout with proper via placement for thermal and signal integrity. Use the STM32CubeMX tool for pin configuration and code generation to accelerate development.

طلب عرض سعر اتصل بنا
STM32F427IGH7 - 180MHz Cortex-M4 MCU | STMicroelectronics
STM32F427IGH7

STM32F427IGH7 - 180MHz Cortex-M4 MCU | STMicroelectronics

STMicroelectronics STM32F427IGH7 is a high-performance 32-bit Arm Cortex-M4 microcontroller with a single-precision floating-point unit, operating up to 180 MHz and packaged in a 176+25 UFBGA 10 mm × 10 mm package. It provides 1 MB of Flash program memory and executes at an advertised 225 DMIPS, with 1.25 DMIPS/MHz performance. The Cortex-M4 core also includes DSP instructions and an ART Accelerator that enables zero-wait-state execution from Flash memory. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one compact device. The STM32F427IGH7 belongs to the STM32F4 family of 32-bit Arm Cortex-M4 microcontrollers and is designed for embedded control applications that require more computation and peripheral integration than general-purpose 8-bit or 16-bit controllers. Its combination of floating-point arithmetic, DSP instructions, memory protection, and high operating frequency makes it suitable for industrial control, communications, audio, and real-time signal-processing systems. Key features include an Arm Cortex-M4 core with single-precision FPU, DSP instruction support, an MPU, 1 MB of Flash memory, and operation up to 180 MHz. The advertised performance of 225 DMIPS supports responsive control loops and computationally intensive peripheral servicing. The ART Accelerator improves Flash execution behavior, while the MPU provides hardware-assisted isolation and access control for safer firmware organization. The device architecture is centered on the Cortex-M4 processor and the STM32F4 peripheral set. Single-precision floating-point instructions accelerate mathematical workloads without requiring a separate coprocessor, while the DSP instructions support filtering and signal transformation operations. The manufacturer datasheet groups the STM32F427xx and STM32F429xx devices together, and the STM32F427IG product page identifies the STM32F427xx line as operating up to 180 MHz. Exact peripheral configuration and electrical limits should be confirmed against the manufacturer datasheet for the selected ordering code. Typical applications include industrial automation controllers, motor and motion-control systems, networked embedded equipment, high-resolution signal-processing modules, audio interfaces, and test-and-measurement instruments. The FPU and DSP capabilities are particularly useful when control algorithms include filtering, transforms, or real-time numeric calculations. The compact BGA package also supports space-constrained embedded products where board area and processing capability are both important. PCB design should prioritize clean power delivery, controlled clock distribution, and full BGA escape routing. Place decoupling and storage components close to their associated pins, route high-speed interfaces according to the manufacturer guidance, and maintain suitable copper and via density beneath the device for power and thermal performance. Validate the selected board stack-up, fanout pattern, and exposed thermal requirements before releasing a production layout. This product data combines the manufacturer product information with practical engineering guidance covering the Cortex-M4 architecture, Flash execution, package constraints, application selection, PCB layout, and verified drop-in alternatives. It helps engineers distinguish exact ordering-code replacements from merely similar STM32 devices before committing to a PCB revision or production order.

طلب عرض سعر اتصل بنا
STM32F427IGT6 - 180MHz Cortex-M4 MCU | STMicroelectronics
STM32F427IGT6

STM32F427IGT6 - 180MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F427IGT6 is a 32-bit Arm Cortex-M4 microcontroller operating up to 180 MHz, with 1 MB of flash memory and a 176-pin LQFP (24x24 mm) package. It integrates single-precision floating-point and DSP instructions for real-time control, connected-product, and signal-processing applications. A microcontroller such as the STM32F427IGT6 sits at the center of an embedded control system. The Arm Cortex-M4 core executes instructions from embedded flash, coordinates peripherals and memory, and manages communications, timing, and control functions. The STM32F4 family hierarchy includes the Cortex-M4 MCU, 32-bit embedded microcontroller, RISC processor, and semiconductor, positioning this device between a general-purpose processor and a dedicated digital controller. Key features include a 32-bit Arm Cortex-M4 core with a single-precision FPU, full DSP instruction support, and operation up to 180 MHz. The device provides 1 MB of flash memory and supports interfaces for connected embedded equipment. Its 176-pin LQFP package exposes substantially more I/O than smaller 48-pin and 64-pin MCUs, supporting concurrent communications, external memory, and application-specific peripherals while requiring a larger PCB footprint. The STM32F427xx architecture combines a high-performance Cortex-M4 core with an extensive peripheral set and direct-memory-access capability. Single-precision floating-point accelerates control calculations, while DSP instructions support filtering and signal transformations. The family is suitable for designs requiring a balance of real-time processing, memory capacity, and extensive peripheral connectivity rather than the ultra-low-power profile of a Cortex-M0+ or Cortex-M3 device. Typical applications include industrial control panels, networked industrial equipment, building automation controllers, motor-control systems, medical instrumentation, and high-performance human-machine-interface terminals. The large pin count is especially useful when a design combines Ethernet, USB, multiple serial interfaces, analog inputs, external memory, and discrete control outputs on one controller. Design around the 176-pin LQFP footprint, including adequate fan-out routing, ground-plane continuity, and decoupling near each supply pin. Confirm every peripheral assignment against the manufacturer pin-description table, especially for alternate-function signals, oscillator connections, debug pins, and supply rails. This product overview combines the STMicroelectronics device specifications, package details, application context, qualified drop-in alternatives, and practical PCB guidance to support component selection, schematic review, and sourcing decisions.

طلب عرض سعر اتصل بنا
STM32F427IIH6 - 180MHz ARM Cortex-M4 MCU with FPU | STMicroelectronics
STM32F427IIH6

STM32F427IIH6 - 180MHz ARM Cortex-M4 MCU with FPU | STMicroelectronics

The STM32F427IIH6 is a high-performance 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M4 core with floating-point unit (FPU) running at up to 180 MHz. It is part of the STM32F4 series, offering a rich set of peripherals and connectivity options. The device is housed in a 176-pin UFBGA package (10x10 mm) and operates over a temperature range of -40°C to +85°C. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (RAM and flash), and programmable input/output peripherals on a single chip. Microcontrollers are the brains of countless electronic devices, from automotive engine control units to IoT sensors and consumer electronics. The STM32F427IIH6 is a high-end MCU within the STM32 family, positioned above the STM32F1/F2 series and below the STM32F7/H7 series, offering a balance of performance, power efficiency, and peripheral integration. Key features of the STM32F427IIH6 include a 2 MB flash memory and 256 KB SRAM, a 32-bit multi-AHB bus matrix, and a wide range of peripherals such as multiple 12-bit ADCs, DACs, timers, and communication interfaces (USART, SPI, I2C, USB OTG, CAN, SDIO, and Ethernet MAC). The device also features a Chrom-ART Accelerator for enhanced graphics performance, a true random number generator, and a cryptographic acceleration cell. The core operates at 180 MHz, delivering 225 DMIPS/1.25 DMIPS/MHz, making it suitable for compute-intensive applications. From a technical depth perspective, the STM32F427IIH6 is built on a 90nm process technology, enabling high integration and low power consumption. It supports a wide supply voltage range of 1.8V to 3.6V, with a comprehensive set of power-saving modes including Sleep, Stop, and Standby. The device includes a memory protection unit (MPU) and a nested vectored interrupt controller (NVIC) for efficient real-time processing. The FPU accelerates single-precision floating-point arithmetic, which is critical for DSP and control algorithms. Typical applications include industrial control systems, motor drives, medical equipment, IoT gateways, and high-end consumer electronics. The rich peripheral set and high performance make it ideal for applications requiring complex real-time processing, such as robotics, 3D printers, and audio processing. The Ethernet MAC and USB OTG support enable connectivity in networked and USB-based systems. When designing with this device, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to each VDD pin, and a 4.7uF bulk capacitor. The VDDA pin must be connected to a clean analog supply, and the VREF+ pin should be decoupled with a 1uF capacitor. The BOOT0 pin configuration determines the boot source; for normal flash boot, connect BOOT0 to GND through a 10k resistor. Pay attention to the crystal oscillator layout for the HSE, keeping traces short and away from high-speed digital lines.

طلب عرض سعر اتصل بنا
STM32F427IIH7 - 180MHz Cortex-M4 MCU | STMicroelectronics
STM32F427IIH7

STM32F427IIH7 - 180MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F427IIH7 is a 32-bit Arm Cortex-M4 microcontroller with a 180 MHz operating frequency, 2 MB of flash memory, and a 176-pin UFBGA package measuring 10 mm by 10 mm. The Cortex-M4 core includes single-precision floating-point and DSP capabilities, making the device suitable for control systems that combine general-purpose processing, real-time signal processing, and extensive peripheral connectivity. A microcontroller is a programmable semiconductor integrated circuit that combines a processor core, memory, and peripherals on one device. It forms the central control element of an embedded system, operating within the hierarchy of embedded processor, microcontroller, and integrated circuit. Unlike a general-purpose computer processor, a microcontroller is designed around compact hardware, real-time execution, low-power operation, and direct access to sensors, communications interfaces, communications peripherals, and actuators. The STM32F427IIH7's principal characteristics include its 180 MHz maximum core frequency, 2 MB flash program memory, 32-bit processing architecture, and 176-UFBGA package. The single-precision FPU accelerates floating-point calculations, while the Cortex-M4 DSP instruction set improves the execution of common filtering and signal-processing operations. These capabilities reduce the need for an external accelerator when an application includes digital control, data acquisition, communications, or embedded math. The STM32F427 and STM32F429 families share a high-performance Arm Cortex-M4 architecture and are documented in the manufacturer datasheet. Memory-space planning is especially important because firmware, boot code, application code, and data-storage requirements compete for internal resources. Designers should also account for bank arrangement, boot configuration, clock-tree setup, peripheral pin multiplexing, and the electrical requirements of each selected I/O when laying out a production PCB. Typical application domains include industrial automation and factory control, communications equipment, high-end audio and digital signal processing, network-connected embedded systems, and compact control platforms. The combination of a 180 MHz core, DSP instructions, FPU, and 2 MB flash provides a practical balance of processing headroom and embedded integration for designs that need more control capability than a basic microcontroller provides. A critical design consideration is the dense 176-UFBGA footprint. The manufacturer pin description, package drawing, and board layout guidance should be used directly for ball assignment, exposed-pad connection, power distribution, and assembly design. This page combines device identification, verified technical data, same-family drop-in options, and practical design guidance to support component selection and PCB planning.

طلب عرض سعر اتصل بنا
STM32F427IIT6 - ARM Cortex-M4 MCU 180MHz 2MB Flash LQFP-176 | STMicroelectronics
STM32F427IIT6

STM32F427IIT6 - ARM Cortex-M4 MCU 180MHz 2MB Flash LQFP-176 | STMicroelectronics

The STMicroelectronics STM32F427IIT6 is a high-performance 32-bit ARM Cortex-M4 microcontroller with FPU operating up to 180 MHz, featuring 2 MB Flash and 256 KB SRAM in a 176-pin LQFP package. It integrates the ART Accelerator allowing 0-wait-state execution from Flash memory at full CPU speed, delivering 225 DMIPS / 1.25 DMIPS per MHz of compute throughput per Dhrystone 2.1 benchmarks. An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core that combines microcontroller-level interrupt determinism with DSP extensions and (in the F4 class) a single-precision floating-point unit. The Cortex-M4 belongs to the ARMv7-M architecture profile and sits within the hierarchy microcontroller -> 32-bit MCU -> RISC processor -> semiconductor. It is engineered for real-time embedded control where deterministic latency and signal-processing throughput both matter. Key features of the STM32F427IIT6 include the Adaptive Real-Time (ART) Accelerator eliminating Flash wait states, a full DSP instruction set plus single-precision FPU, a Chrom-ART graphics accelerator for TFT displays, USB 2.0 OTG full-speed and high-speed with on-chip PHY, an integrated 10/100 Ethernet MAC with IEEE 1588v2 hardware time-stamping, three 12-bit ADCs reaching 2.4 MSPS, two 12-bit DACs, and up to 17 timers including motor-control timers. The device supports up to 256 KB SRAM with 4 KB backup SRAM and a wide range of communication peripherals: CAN 2.0B, UART/USART, SPI, I2C, SAI, and SDMMC. Architecturally the STM32F427 leverages the Cortex-M4 Harvard bus structure with separate ICode/DCode buses for Flash access, a dedicated DMA matrix for memory traffic offload, and multi-layer AHB/APB bus matrix peripherals with independent clocking. The ART Accelerator prefetch buffer coupled with the 5x pipeline lets the core sustain 180 MHz instruction fetch from Flash without stalls, which is critical for control loops in motor drives and audio DSP. Typical applications include industrial motor control (FOC for three-phase PMSM/BLDC drives), human-machine interface panels with TFT LCD, Ethernet-connected PLC modules with deterministic real-time communication, audio codecs and effects processors leveraging DSP instructions, medical instrumentation, and high-end consumer audio/video equipment. The wide peripheral set lets one chip replace several dedicated ICs in the BOM. When designing with this device, allocate a 4-layer PCB with continuous ground pour and decoupling of 100 nF plus 4.7 uF ceramic per VDD pin pair to keep the high-speed digital switching noise isolated from sensitive analog rails. The 176-pin LQFP (24 x 24 mm) requires 0.5 mm pitch routing; signal integrity on the Ethernet and USB high-speed lines demands controlled impedance (90 ohm differential). This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and design notes that complement - but do not replace - the manufacturer datasheet and reference manual RM0090.

طلب عرض سعر اتصل بنا
STM32F427VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | STMicroelectronics
STM32F427VGT6

STM32F427VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | STMicroelectronics

The STMicroelectronics STM32F427VGT6 is a high-performance 32-bit ARM Cortex-M4 microcontroller with FPU operating at up to 180 MHz, packaged in a 100-pin LQFP (14x14 mm) with 1 MB of Flash and 256 KB of SRAM. It integrates an Adaptive Real-Time (ART) Accelerator that enables 0-wait-state execution from Flash, delivering 225 DMIPS / 1.25 DMIPS/MHz (Dhrystone 2.1) and full DSP instruction set support. What is a Cortex-M4 microcontroller? A microcontroller (MCU) is a single-chip computer integrating a CPU core, program memory (Flash), working memory (SRAM), and peripherals such as timers, ADCs, and communication interfaces. The ARM Cortex-M4 is a 32-bit RISC core designed for deterministic real-time embedded applications, with optional single-precision FPU and DSP extensions. Within the broader taxonomy, the Cortex-M4 belongs to the Cortex-M class -> 32-bit MCU -> microcontroller -> embedded processing -> semiconductor. The STM32F4 line is ST's high-performance Cortex-M4 family, sitting above Cortex-M0/M0+/M3 in compute capability and below Cortex-M7 in raw DSP throughput. Key features of the STM32F427VGT6 include: up to 17 timers, three 12-bit ADCs with 2.4 MSPS, two 12-bit DACs, USB 2.0 OTG full-speed + high-speed with on-chip PHY, two CAN 2.0B controllers, an Ethernet MAC, an LCD-TFT controller (F427 line), crypto/hash accelerators, and up to 114 general-purpose I/Os. The 100-pin LQFP package exposes 82 GPIO-capable pins, multiple USART/UART/SPI/I2C interfaces, and SDIO/SDMMC for storage mass expansion. Architecturally, the device pairs a 3-stage pipeline Cortex-M4 core with a multi-layer AHB/APB bus matrix and an ART Accelerator that prefetches and caches instructions from Flash to remove wait states at 180 MHz. The on-chip voltage regulator supports 1.8V-3.6V single-supply operation, with a low-power RTC domain retaining 32 backup registers across Standby/Shutdown modes. Cryptographic acceleration (AES 128/256, SHA-1/SHA-2, TRNG) provides hardware offload for secure boot and TLS payload processing. Typical applications include industrial automation (PLC, HMI, motor drives), medical instrumentation, point-of-sale terminals, building security panels, audio/video consumer appliances, smart-grid metering, and Ethernet-connected IoT gateways. The combination of Ethernet MAC, USB OTG HS, and TFT controller supports graphics terminals and Human-Machine Interfaces without an external graphics IC. When designing with the STM32F427VGT6, ensure VBAT is supplied for RTC retention, and decouple VDD/VSSA/VDDA/VREF+ with 100 nF capacitors within 1-2 mm of each pin pair. Use the ST-LINK/V2 programmer and STM32CubeMX for clock-tree and pin initialization; the HAL/LLSE libraries are the canonical firmware starting point. Review the datasheet's absolute maximum ratings for ESD and latch-up before finalizing PCB layout. This page synthesizes distributor pricing, drop-in LQFP-100 alternatives, and practical design notes not found on a single ST datasheet page, accelerating component selection for engineers building real-time Ethernet/USB embedded systems.

طلب عرض سعر اتصل بنا
STM32F427VGT7 - 180MHz Cortex-M4 1MB Flash MCU | STMicroelectronics
STM32F427VGT7

STM32F427VGT7 - 180MHz Cortex-M4 1MB Flash MCU | STMicroelectronics

STMicroelectronics STM32F427VGT7 is a 32-bit Arm Cortex-M4 microcontroller with an integrated single-precision FPU, up to 180 MHz operating frequency, 1 MB Flash memory, and 256 KB SRAM plus 4 KB backup SRAM in a 100-pin LQFP package. It combines 225 DMIPS performance with DSP instructions, an ART Accelerator, USB OTG, and Ethernet connectivity. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The STM32F427 belongs to the Arm Cortex-M4 microcontroller family within the broader embedded-processing and semiconductor hierarchy. Its architecture supports efficient control, communications, data acquisition, and signal-processing workloads while maintaining a broad peripheral set for industrial and embedded systems. Key features include 32-bit RISC processing at up to 180 MHz, single-precision floating-point hardware, DSP instruction support, an MPU, and an ART Accelerator designed for zero-wait-state execution from Flash. The device includes 1 MB of Flash, 256 KB of SRAM, and an additional 4 KB of backup SRAM. USB OTG and Ethernet interfaces support connected equipment, while multiple serial, timer, DMA, and general-purpose I/O resources support deterministic embedded control. The Cortex-M4 core combines efficient real-time performance with a single-precision FPU, making it suitable for control loops that benefit from hardware floating-point operations. The stated 225 DMIPS and 1.25 DMIPS/MHz performance figures describe the computational envelope of this core. The ART Accelerator allows frequently executed instructions to be cached from Flash, supporting higher practical performance without requiring the entire 1 MB code area to reside in SRAM. Typical applications include industrial automation, factory equipment, motor-control systems, networked embedded controllers, USB data acquisition, and communications equipment. Ethernet and USB OTG make the device relevant to connected machines and service interfaces, while the DSP instruction set and FPU support audio, control, and other mathematically intensive processing. Design considerations center on pin assignment, clock-tree configuration, power sequencing, and peripheral conflict management. Place all required decoupling capacitors close to the corresponding supply pins, route high-current and high-speed signals carefully, and confirm unused pins against the manufacturer pin and package guidance before finalizing the PCB. This product record combines core specifications, application guidance, package considerations, and verified replacement analysis to support component selection, schematic review, PCB planning, and sourcing for STM32F427VGT7 designs.

طلب عرض سعر اتصل بنا
STM32F427VIT6 - 180MHz Cortex-M4 MCU 2MB Flash LQFP-100 | ST
STM32F427VIT6

STM32F427VIT6 - 180MHz Cortex-M4 MCU 2MB Flash LQFP-100 | ST

The STMicroelectronics STM32F427VIT6 is a high-performance 32-bit ARM Cortex-M4 microcontroller with single-precision floating-point unit (FPU), operating at up to 180 MHz and delivering 225 DMIPS / 3.92 CoreMark/MHz, housed in a 100-pin LQFP package with 2 MB of on-chip Flash and 256 KB of SRAM. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit that integrates a processor core, program memory (Flash), data memory (SRAM), and programmable peripherals on a single die. In the system hierarchy an MCU is a member of the embedded-processor family, which itself sits inside the broader integrated-circuit category. The STM32F427VIT6 belongs to ST's STM32F4 series - the high-performance tier of the STM32 family - which targets applications that need Cortex-M4 DSP, large memory, Ethernet, USB OTG HS, and a TFT-LCD interface. Key features of the STM32F427VIT6 include the ART Accelerator allowing 0-wait-state execution from Flash at full 180 MHz, a memory protection unit (MPU), a full DSP instruction set, three 12-bit ADCs (up to 2.4 MSPS each), two 12-bit DACs, a Chrom-ART graphics accelerator, a true random number generator (TRNG), and a cryptographic acceleration cell supporting AES, DES, SHA, and HMAC. Communication peripherals include three USART/UART pairs, four SPIs, three I2C, two CAN 2.0B, USB OTG full-speed and high-speed, an Ethernet MAC, and an SDIO interface. The device is built on a 90 nm CMOS process with an LQFP-100 outline of 14 mm x 14 mm and 0.5 mm pitch, exposing 82 GPIO. Core supply operates from 1.8 V to 3.6 V; an integrated voltage regulator and POR/BOR circuitry handle power-on sequencing. The industrial-grade -VIT6 suffix covers -40 C to +85 C ambient operation. Typical applications include industrial motor control (sensorless FOC), building-automation gateways, point-of-sale terminals, medical instrumentation, HMI panels with TFT-LCD, and IoT edge nodes requiring on-chip Ethernet and TLS acceleration. The cryptographic cell makes it attractive for connected devices that need AES-128/192/256 hardware offload. Design consideration: place a 100 nF X7R decoupling capacitor on every VDD pin within 2 mm of the lead, add a 4.7 uF bulk capacitor near the VBAT pin, and isolate VDDA from VDD with a ferrite bead plus 1 uF + 10 nF filter network. For LQFP-100 at 180 MHz, dedicate a continuous ground plane under the device and route the HSE crystal traces symmetrically with 4 mm maximum length. This page synthesizes XAIPART distributor pricing, verified drop-in alternatives, application-focused design notes, and a same-package comparison matrix that go beyond what the manufacturer datasheet presents on its own.

USD $10.50 اتصل بنا
STM32F427ZGT6 - 180MHz Cortex-M4 MCU | STMicroelectronics
STM32F427ZGT6

STM32F427ZGT6 - 180MHz Cortex-M4 MCU | STMicroelectronics

STMicroelectronics STM32F427ZGT6 is a 32-bit Arm Cortex-M4 microcontroller with a single-precision floating-point unit, operating at up to 180 MHz and housed in a 144-pin LQFP package. It integrates 1 MB of Flash memory and combines the Cortex-M4 DSP instruction set, memory-protection unit, and ART Accelerator architecture for high-performance embedded control. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The STM32F427 belongs to the Arm Cortex-M4 microcontroller family within the broader embedded-processing and semiconductor hierarchy. Its 32-bit RISC architecture supports efficient control workloads, while the floating-point unit accelerates single-precision calculations commonly encountered in control, signal-processing, and communications algorithms. The device provides 225 DMIPS at 180 MHz according to the STM32F427xx and STM32F429xx datasheet, corresponding to 1.25 DMIPS per MHz under the stated Dhrystone 2.1 metric. The single-precision FPU supports Arm single-precision data-processing instructions and data types, while the complete DSP instruction set supports efficient implementation of common digital signal-processing operations. The ART Accelerator permits zero-wait-state execution from Flash memory. The STM32F427ZGT6 is designed for high-performance embedded systems requiring substantial Flash memory and real-time processing in a large leaded package. Its 144-pin LQFP construction exposes a broad set of device pins and is suitable for prototypes, controller platforms, industrial equipment, and communication-oriented products where an extensive peripheral complement and ample routing access are important. Exact peripheral configurations, voltage limits, and memory-map details should be confirmed against the manufacturer datasheet before schematic capture. Typical design contexts include industrial automation controllers, communications equipment, audio and digital signal-processing systems, and general-purpose embedded platforms. The 180 MHz Cortex-M4 core is particularly relevant to control loops that benefit from deterministic instruction execution, while the 1 MB Flash capacity accommodates larger firmware images, boot code, configuration data, and application logic. The LQFP-144 footprint is easier to inspect and prototype than a fine-pitch ball-grid-array package. When designing around this MCU, begin with the manufacturer pin-definition table and package drawing, then verify every power, ground, reset, clock, and debug connection against the selected board revision. Pay particular attention to decoupling, exposed supply requirements, clock stability, and firmware support for the configured peripherals. The 144-pin footprint provides extensive connectivity, but signal planning and return-path control remain essential for reliable operation. This product page combines the core STM32F427ZGT6 specifications, manufacturer documentation links, a focused family comparison, and practical integration guidance. It also distinguishes documented drop-in alternatives from broader MCU substitutions so engineers can assess footprint, core, memory, and lifecycle constraints before committing to a replacement.

طلب عرض سعر اتصل بنا
STM32F427ZIT6 - 180MHz ARM Cortex-M4F MCU, 2MB Flash | STMicroelectronics
STM32F427ZIT6

STM32F427ZIT6 - 180MHz ARM Cortex-M4F MCU, 2MB Flash | STMicroelectronics

The STMicroelectronics STM32F427ZIT6 is a high-performance 32-bit microcontroller based on the ARM Cortex-M4F core with floating-point unit (FPU), operating at up to 180 MHz. It integrates 2 MB of Flash memory and 256 KB of SRAM, making it one of the most resource-rich MCUs in the STM32F4 series. The device is housed in a 144-pin LQFP package (LQFP144, 20x20 mm) and supports a wide supply voltage range of 1.8V to 3.6V, with an operating temperature range of -40°C to +85°C. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (Flash and SRAM), and programmable input/output peripherals. The STM32F427ZIT6 belongs to the STM32F4 family, which is part of the broader STM32 32-bit ARM Cortex-M microcontroller portfolio. This family is known for its balance of performance, power efficiency, and rich peripheral integration, making it a popular choice for industrial, consumer, and IoT applications. Key features include a 180 MHz ARM Cortex-M4F core with FPU and DSP instructions, 2 MB of dual-bank Flash memory, 256 KB of SRAM, and a comprehensive set of peripherals: 3x 12-bit ADCs, 2x 12-bit DACs, 8x UARTs, 6x SPIs, 3x I2Cs, 2x CAN, 1x USB 2.0 OTG FS/HS, 1x Ethernet MAC, and a camera interface. The device also includes a true random number generator (RNG), a cryptographic acceleration cell (AES, DES, 3DES), and a Chrom-ART Accelerator for 2D graphics. The STM32F427ZIT6 is built on a 90nm process technology, offering a good balance between performance and power consumption. It features a flexible power management system with multiple low-power modes (Sleep, Stop, Standby) and a backup domain for RTC and SRAM retention. The dual-bank Flash allows read-while-write operations, enabling firmware updates without halting the system. The Chrom-ART Accelerator offloads 2D graphics operations from the CPU, improving GUI performance in display applications. Typical applications include industrial control systems, motor drives, medical devices, consumer electronics, IoT gateways, and human-machine interfaces (HMI). The rich connectivity options (Ethernet, USB, CAN) make it suitable for networked embedded systems. The high Flash and SRAM capacities support complex firmware and real-time operating systems (RTOS). When designing with this device, pay attention to the power supply decoupling: place 100nF capacitors close to each VDD pin and a 4.7uF bulk capacitor. The VDDA pin must be connected to a clean analog supply to ensure ADC accuracy. For high-speed USB and Ethernet, use the recommended external PHY and crystal oscillator (25 MHz for Ethernet).

طلب عرض سعر اتصل بنا
STM32F427ZIT7 - 180MHz Cortex-M4 2MB MCU | STMicroelectronics
STM32F427ZIT7

STM32F427ZIT7 - 180MHz Cortex-M4 2MB MCU | STMicroelectronics

STMicroelectronics STM32F427ZIT7 is a high-performance 32-bit Arm Cortex-M4 microcontroller operating up to 180 MHz, with 2 MB of Flash memory and a 144-LQFP package measuring 20 mm by 20 mm. The microcontroller includes a single-precision floating-point unit, DSP instructions, a memory protection unit, and the ART Accelerator for high-performance execution from Flash. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. The STM32F4 MCU family belongs to the Arm Cortex-M microcontroller hierarchy and provides real-time control capabilities for embedded products. Its combination of computational performance, external-interface options, and package density makes the STM32F427ZIT7 suitable for complex control systems rather than basic indicator or logic-only products. Core features include the 32-bit Cortex-M4 processor operating at up to 180 MHz, a single-precision FPU, adaptive real-time accelerator support, DSP instructions, and an MPU. The processor is rated at 225 DMIPS, equivalent to 1.25 DMIPS/MHz under Dhrystone 2.1. Its 2 MB Flash configuration provides substantially more program storage than the 1 Mbyte variant associated with STM32F429ZIT6, making the STM32F427ZIT7 preferable when firmware, code libraries, graphics data, or protocol stacks require additional space. The device integrates extensive connectivity and control peripherals for transferring data and driving external hardware. Its architecture supports both high-speed serial communication and general-purpose control functions, allowing a single MCU to coordinate sensors, memory, human-interface devices, and actuators. The 144-LQFP package provides a large pin count for systems requiring numerous I/O functions, while its 20 mm by 20 mm body remains practical for industrial control boards, data-acquisition equipment, and embedded gateways. Typical applications include industrial automation controllers, communications equipment, test and measurement instruments, medical monitoring systems, and embedded human-machine interfaces. The 180 MHz Cortex-M4 core is useful for protocol processing, signal-chain supervision, and real-time system management, while the 2 MB Flash capacity allows more complete firmware and application logic to be consolidated into the MCU. Designers should select decoupling, clock, reset, and programming interfaces directly from the manufacturer pin-description table for the exact 144-LQFP device. The LQFP footprint requires adequate solderable pin length for inspection and rework, while high-speed communications and external memory interfaces demand controlled return paths. Firmware should also be validated for clock, cache, voltage, and peripheral configurations used by the finished equipment. This page combines the principal device specifications with package guidance, application-specific engineering context, and a parameter-by-parameter comparison against same-package STM32 family members. It helps engineers distinguish memory capacity, temperature grade, and timer-ADC features before deciding whether the STM32F427ZIT7 is the correct variant for a new embedded design.

طلب عرض سعر اتصل بنا
STM32F429AGH6 - 180MHz ARM Cortex-M4 MCU 1MB Flash | STMicroelectronics
STM32F429AGH6

STM32F429AGH6 - 180MHz ARM Cortex-M4 MCU 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F429AGH6 is a high-performance 32-bit ARM Cortex-M4 microcontroller with FPU and DSP instructions, clocked at up to 180 MHz with 1 MB of embedded Flash memory, packaged in a 169-pin UFBGA (7x7 mm). It delivers 225 DMIPS / 1.25 DMIPS/MHz (Dhrystone 2.1) performance and includes the Adaptive Real-Time (ART) Accelerator that enables 0-wait-state execution from Flash. The device integrates 256 KB of SRAM (including 64 KB of CCM SRAM for time-critical routines), a Memory Protection Unit, and a TFT-LCD controller up to XGA resolution with Chrom-ART. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data memory, and a rich set of on-chip peripherals. The STM32F429AGH6 belongs to the wider STM32F4 family of Cortex-M4 microcontrollers, which sit between Cortex-M3 devices (used for general 32-bit control) and Cortex-M7 parts (used for even higher DSP performance). MCUs are typically deployed as the central processing element in embedded systems spanning industrial, consumer, medical, and connectivity products. Within a system design, an MCU like the STM32F429AGH6 orchestrates user input, sensor acquisition, motor or actuator drive, communication with companion ICs, and connectivity to upstream processors. The STM32F429AGH6 also features a Chrom-ART graphics accelerator for fast 2D image compositing, an on-chip TFT-LCD controller supporting up to XGA resolution, an 8-bit to 14-bit parallel camera interface, and a USB 2.0 OTG full-speed/high-speed controller. Connectivity includes two CAN 2.0B interfaces, an SDIO interface, up to six USARTs, four SPIs, two I2S full-duplex interfaces, two I2Cs, and an Ethernet MAC with MII/RMII. A 12-bit ADC (2.4 MSPS), two 12-bit DACs, and a low-power RTC round out the analog and housekeeping peripherals. From an architectural perspective, the Cortex-M4 core brings single-precision floating-point, hardware multiply-accumulate, and a SIMD-style DSP extension that accelerates signal-processing loops commonly used for audio decoding, motor control, and sensor fusion. Combined with the ART Accelerator, the device offers predictable, deterministic interrupt latency, which is critical for hard real-time applications such as closed-loop motor control and digital power conversion. Typical applications include HMI panels with TFT LCD displays, video doorbells, smart appliances, industrial PLCs, motor-control inverters, and bar-code scanners. In designs where the host needs both an LCD controller and rich connectivity, the STM32F429AGH6 often replaces a microprocessor-plus-discrete-LCD-controller solution, reducing BOM cost and board area. When designing with this MCU, pay close attention to the decoupling strategy on the 1.2V core supply and the routing of the HS USB differential pair; both directly impact radiated EMI compliance. Review the pinout table carefully before committing the layout, because several pins alternate between SPI/I2S/USART functions and the desired selection must be remapped through the GPIO_AFR registers. The UFBGA-169 (7x7 mm) package allows a compact PCB, but its 0.5 mm ball pitch demands precise reflow profiling and accurate solder-paste deposition at assembly. This page synthesizes distributor pricing, drop-in same-brand and cross-brand alternatives, and practical design notes that complement the manufacturer datasheet and accelerate BOM decisions for hardware engineers.

طلب عرض سعر اتصل بنا
STM32F429AGH6TR - 180MHz ARM Cortex-M4 MCU 1MB Flash | STMicroelectronics (Tape & Reel)
STM32F429AGH6TR

STM32F429AGH6TR - 180MHz ARM Cortex-M4 MCU 1MB Flash | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F429AGH6TR is a high-performance 32-bit ARM Cortex-M4 microcontroller with FPU and DSP instructions, clocked at up to 180 MHz with 1 MB of embedded Flash memory, packaged in a 169-pin UFBGA (7x7 mm). It delivers 225 DMIPS / 1.25 DMIPS/MHz (Dhrystone 2.1) performance and includes the Adaptive Real-Time (ART) Accelerator that enables 0-wait-state execution from Flash. The device integrates 256 KB of SRAM (including 64 KB of CCM SRAM for time-critical routines), a Memory Protection Unit, and a TFT-LCD controller up to XGA resolution with Chrom-ART. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data memory, and a rich set of on-chip peripherals. The STM32F429AGH6TR belongs to the wider STM32F4 family of Cortex-M4 microcontrollers, which sit between Cortex-M3 devices (used for general 32-bit control) and Cortex-M7 parts (used for even higher DSP performance). MCUs are typically deployed as the central processing element in embedded systems spanning industrial, consumer, medical, and connectivity products. Within a system design, an MCU like the STM32F429AGH6TR orchestrates user input, sensor acquisition, motor or actuator drive, communication with companion ICs, and connectivity to upstream processors. The STM32F429AGH6TR also features a Chrom-ART graphics accelerator for fast 2D image compositing, an on-chip TFT-LCD controller supporting up to XGA resolution, an 8-bit to 14-bit parallel camera interface, and a USB 2.0 OTG full-speed/high-speed controller. Connectivity includes two CAN 2.0B interfaces, an SDIO interface, up to six USARTs, four SPIs, two I2S full-duplex interfaces, two I2Cs, and an Ethernet MAC with MII/RMII. A 12-bit ADC (2.4 MSPS), two 12-bit DACs, and a low-power RTC round out the analog and housekeeping peripherals. From an architectural perspective, the Cortex-M4 core brings single-precision floating-point, hardware multiply-accumulate, and a SIMD-style DSP extension that accelerates signal-processing loops commonly used for audio decoding, motor control, and sensor fusion. Combined with the ART Accelerator, the device offers predictable, deterministic interrupt latency, which is critical for hard real-time applications such as closed-loop motor control and digital power conversion. Typical applications include HMI panels with TFT LCD displays, video doorbells, smart appliances, industrial PLCs, motor-control inverters, and bar-code scanners. In designs where the host needs both an LCD controller and rich connectivity, the STM32F429AGH6TR often replaces a microprocessor-plus-discrete-LCD-controller solution, reducing BOM cost and board area. When designing with this MCU, pay close attention to the decoupling strategy on the 1.2V core supply and the routing of the HS USB differential pair; both directly impact radiated EMI compliance. Review the pinout table carefully before committing the layout, because several pins alternate between SPI/I2S/USART functions and the desired selection must be remapped through the GPIO_AFR registers. The UFBGA-169 (7x7 mm) package allows a compact PCB, but its 0.5 mm ball pitch demands precise reflow profiling and accurate solder-paste deposition at assembly. This page synthesizes distributor pricing, drop-in same-brand and cross-brand alternatives, and practical design notes that complement the manufacturer datasheet and accelerate BOM decisions for hardware engineers.

طلب عرض سعر اتصل بنا
STM32F429AIH6 - 180MHz Cortex-M4 MCU with 2MB Flash | STMicroelectronics
STM32F429AIH6

STM32F429AIH6 - 180MHz Cortex-M4 MCU with 2MB Flash | STMicroelectronics

The STMicroelectronics STM32F429AIH6 is a 32-bit Arm Cortex-M4 microcontroller with FPU and DSP capability, operating at up to 180 MHz and integrating 2 MB of Flash memory in a 169-UFBGA 7 x 7 mm package. Its headline configuration combines 256 KB of system SRAM, 4 KB of backup SRAM, a broad peripheral set, and connectivity including Ethernet, USB, CAN, LCD, camera, and external-memory interfaces. The STM32F429AI is positioned for high-performance embedded control, industrial communications, multimedia processing, and connected equipment. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, peripherals, and communication interfaces on one package. The STM32F4 family uses the Cortex-M4 processor architecture, which provides real-time control capabilities together with hardware floating-point and digital-signal-processing instructions. The STM32F429AIH6 belongs to the STM32F4 high-performance line and is intended for designs requiring substantially more processing and interface capability than a basic embedded control MCU. According to the verified product listing, the device includes a 32-bit Arm Cortex-M4 core, 180 MHz maximum operating frequency, 2 MB Flash, a 169-UFBGA package, and mixed-signal and timer-driven control resources. The manufacturer datasheet result additionally identifies 225 DMIPS, up to 2 MB Flash, 256 KB SRAM plus 4 KB backup SRAM, USB OTG high-speed and full-speed support, Ethernet, 17 timers, 3 ADCs, up to 20 communication interfaces, and camera and LCD-TFT support. These features make the MCU suitable for applications that combine control loops with data transfer and display or imaging functions. The STM32F429AIH6 can be used in industrial automation equipment, motor-control systems, Ethernet-connected controllers, USB peripherals, data acquisition units, medical monitoring equipment, and human-machine-interface platforms. Its 180 MHz processing headroom can support protocol handling, signal acquisition, control algorithms, and user-interface tasks in one integrated design. The large Flash capacity also allows more firmware, boot code, graphics data, and application logic to be stored on-chip. The most important design consideration is power, clock, decoupling, and PCB implementation for a high-pin-count BGA device. The exact pin names, electrical limits, memory-map details, clock requirements, and recommended decoupling values must be taken from the manufacturer datasheet; they are not inferred here. Users should also verify package ball mapping and assembly capabilities before committing to a 169-UFBGA layout. This product page combines verified distributor and manufacturer information with engineering guidance, application context, and procurement-oriented details.

طلب عرض سعر اتصل بنا
STM32F429BET6 - 180MHz Cortex-M4 MCU | STMicroelectronics
STM32F429BET6

STM32F429BET6 - 180MHz Cortex-M4 MCU | STMicroelectronics

STMicroelectronics STM32F429BET6 is a 32-bit Arm Cortex-M4 microcontroller operating up to 180 MHz, with 512 KB of Flash memory, 208 pins, and a 208-LQFP 28x28 mm package. The device combines a single-precision floating-point unit, DSP instructions, an ART Accelerator, and 225 DMIPS performance, making it suitable for high-performance embedded control, communications, industrial equipment, audio, and connected systems. Its 208-LQFP package provides extensive external peripheral connectivity while supporting surface-mount assembly. The Cortex-M4 is a 32-bit RISC processor within the Arm Cortex-M family. In the STM32F4 product hierarchy, the STM32F429BET6 belongs to the STM32 family and STM32F4 high-performance microcontroller line. Its processing core includes an FPU and DSP instruction set, allowing designers to implement control algorithms, digital signal processing, communications protocols, and floating-point calculations without relying on an external processor. The STM32F429BET6 provides 512 KB of Flash memory for firmware and 208 package pins for interfacing to system resources. The verified product listing identifies the MCU as a 180 MHz ARM Cortex-M4 device with 512 KB Flash memory in a 208-LQFP package. The same-family comparison data also identifies the STM32F429 device with 256 KB RAM, although the exact RAM organization and complete peripheral allocation should be confirmed against the manufacturer datasheet before design release. Typical embedded applications benefit from the combination of real-time control and extensive pin connectivity. The STM32F429BET6 can serve as the central controller in industrial automation, factory equipment, communications gateways, audio and signal-processing systems, and connected embedded products. Its 180 MHz operating frequency and 225 DMIPS capability support responsive multitasking and computationally intensive control functions, while the LQFP package remains practical for prototypes and designs requiring a large number of external connections. Design planning should begin with the exact pinout, power requirements, clock configuration, memory usage, and peripheral assignments in the manufacturer datasheet. Validate the 208-pin land pattern, pin multiplexing, decoupling strategy, exposed programming and debug connections, and the selected STM32F4 toolchain. The T6 suffix indicates a temperature and package ordering code whose full commercial meaning must be confirmed from the manufacturer ordering information.

طلب عرض سعر اتصل بنا
STM32F429BGT6 - 180MHz Cortex-M4 MCU 1MB Flash | STMicroelectronics
STM32F429BGT6

STM32F429BGT6 - 180MHz Cortex-M4 MCU 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F429BGT6 is a 180 MHz Arm Cortex-M4 32-bit microcontroller with FPU, 1 MB of Flash memory, 256 KB of SRAM, and a TFT-LCD controller, housed in a 208-pin LQFP package. It delivers 225 DMIPS (1.25 DMIPS/MHz) with the ART Accelerator enabling 0-wait-state execution from Flash. A microcontroller (MCU) is a compact integrated circuit that combines a processor core, non-volatile program memory (Flash), volatile data memory (SRAM), and programmable peripherals on a single die, allowing it to govern a dedicated embedded function without external support chips. The STM32F429BGT6 sits in the STM32F4 high-performance series, which itself belongs to the broader STM32 family of Arm Cortex-M based 32-bit MCUs, and within the taxonomy MCU -> embedded processor -> semiconductor. The F4 series is positioned between the mainstream STM32F1/F0 lines and the higher-end STM32F7/H7 lines, balancing DSP throughput, peripheral integration, and power efficiency. Key differentiators include the Chrom-ART Accelerator (DMA2D) for offloading graphics operations, a TFT-LCD controller supporting up to XGA resolution, a camera interface, and a flexible memory controller (FMC) for SRAM, PSRAM, NOR, and NAND expansion. The device integrates 3x 12-bit ADCs, 2x DACs, 12x 16-bit timers, 2x 32-bit timers, and a full connectivity set: SPI, I2C, USART, UART, CAN, USB OTG, and Ethernet MAC. Architecturally, the STM32F429BGT6 is built on a 90 nm process and pairs the Cortex-M4 core with a single-precision FPU and DSP instructions, accelerating filtering, control-loop, and sensor-fusion math. A true random number generator (RNG) and cryptographic acceleration cell support secure applications, while the multi-AHB bus matrix and dual-bank Flash organization reduce contention between the CPU, DMA, and graphics engines. Typical applications include industrial HMI panels, motor drives, medical instrumentation, consumer appliances, and IoT gateways. The LCD controller and Chrom-ART Accelerator make it especially attractive for graphical user interfaces, while Ethernet and USB OTG enable networked data logging and device connectivity. When designing with the STM32F429BGT6, decouple every VDD pin with a 100 nF capacitor placed close to the pin, use a 25 MHz crystal for the main clock, and configure the internal PLL to reach the 180 MHz system clock. The device operates from 1.7 V to 3.6 V and supports Sleep, Stop, and Standby low-power modes for energy-sensitive designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, second-sourcing, and layout decisions.

طلب عرض سعر اتصل بنا
STM32F429BIT6 - 180MHz ARM Cortex-M4 MCU 2MB Flash LQFP-208 | STMicroelectronics
STM32F429BIT6

STM32F429BIT6 - 180MHz ARM Cortex-M4 MCU 2MB Flash LQFP-208 | STMicroelectronics

The STMicroelectronics STM32F429BIT6 is a high-performance 32-bit ARM Cortex-M4 microcontroller with single-precision floating-point unit (FPU), operating at up to 180 MHz and delivering 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1). It integrates 2 MB of dual-bank Flash memory and 256 KB of SRAM, and is housed in a 208-pin LQFP package (LQFP208, 28x28 mm body). A microcontroller (MCU) is a compact integrated circuit that combines a processor core, on-chip memory, and programmable peripherals to govern a specific operation in an embedded system. The STM32F429BIT6 belongs to the STM32F4 series of high-performance ARM Cortex-M4 Flash microcontrollers within STMicroelectronics' broader STM32 family. STM32F4 devices occupy the mid-to-high tier of the STM32 portfolio, balancing performance, peripheral integration, and power efficiency for industrial, consumer, and IoT designs. Key features include the Adaptive Real-Time (ART) Accelerator allowing 0-wait-state execution from Flash, a memory protection unit (MPU), DSP instructions, and the Chrom-ART Accelerator for hardware-accelerated 2D graphics rendering. The device integrates three 12-bit ADCs (up to 2.4 MSPS), two 12-bit DACs, a true random number generator (RNG), and a flexible memory controller (FMC) for SDRAM, NOR, and NAND. Connectivity is provided by USB OTG HS/FS, Ethernet MAC, multiple USART/UART/SPI/I2C/CAN interfaces, and an LCD-TFT parallel interface supporting resolutions up to WXGA. The STM32F429BIT6 is built on a 90 nm CMOS process and operates from a 2.0-3.6 V supply with multiple low-power modes (Sleep, Stop, Standby). The Cortex-M4 core plus FPU accelerates single-precision math, enabling sensor fusion, motor control loops, and audio processing. The dual-bank Flash architecture supports read-while-write, allowing in-field firmware upgrades without halting the application. Integrated cryptographic/hash accelerators are not present on this part (they appear on F4x9 variants), so security primitives must be implemented in firmware or offloaded. Typical applications include industrial automation, motor control, smart-home gateways, medical instrumentation, and graphical human-machine interfaces (HMI). In HMI designs the Chrom-ART Accelerator offloads the CPU for TFT-LCD rendering while the Ethernet MAC and USB OTG enable remote monitoring and configuration. The rich peripheral set also suits programmable logic controllers (PLC) and audio mixers requiring simultaneous connectivity and signal processing. When designing with this MCU, decouple every VDD/VSS pair with 100 nF ceramic capacitors placed within 2 mm of each pin, and isolate VDDA with a ferrite bead plus 1 nF + 10 nF capacitors to reduce ADC noise. Use an external 32.768 kHz crystal on PC14/PC15 for RTC accuracy and a HSE crystal on PH0/PH1 for the main 180 MHz PLL. The NRST pin requires an external 10 kΩ pull-up and a 100 nF capacitor for reliable reset. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا