المنتجات (46,000+)

STM32L152CBT6 - 32MHz Cortex-M3 128KB MCU | STMicroelectronics
STM32L152CBT6

STM32L152CBT6 - 32MHz Cortex-M3 128KB MCU | STMicroelectronics

STMicroelectronics STM32L152CBT6 is a 32-bit ARM Cortex-M3 microcontroller with 128KB of flash memory, a 32MHz maximum clock, and a 48-pin LQFP package measuring 7 x 7 mm. It belongs to the STM32L1 ultra-low-power MCU family and combines an energy-efficient 32-bit core with 12-bit peripheral capabilities for battery-powered, industrial, sensor, and low-power embedded systems. An ultra-low-power microcontroller is a semiconductor designed to complete embedded control tasks while consuming as little energy as practical. The STM32L1 family belongs to the broader hierarchy of embedded processors, microcontrollers, 32-bit ARM microcontrollers, and power-management-oriented embedded devices. This combination makes the STM32L152CBT6 suitable for systems that must monitor sensors, control actuators, and manage communications over long operating periods between maintenance cycles. The device provides 128KB of flash memory for program storage and operates at up to 32MHz. Its 48-LQFP package exposes the GPIO, communication, debug, clock, and power functions required by a medium-complexity embedded design. The STM32L152CBT6 also belongs to the STM32L152 device family, which is identified in the product listing as an ultra-low-power Cortex-M3 MCU with LCD-oriented features. Confirm the complete peripheral and electrical details against the manufacturer datasheet before finalizing a design. The principal architectural benefit is the combination of a 32-bit ARM Cortex-M3 processing core with low-power-oriented design in a conventional 7 x 7 mm LQFP footprint. This architecture is useful when firmware requires more general computation than an 8-bit MCU while the product must still operate from a constrained energy budget. The package offers enough pin count for external sensors, displays, communication transceivers, and general-purpose control signals. Typical applications include low-power sensor nodes, industrial monitoring equipment, compact data-acquisition devices, battery-powered controllers, LCD-equipped human-interface equipment, and embedded systems requiring multiple peripheral functions around a single microcontroller. The target device can also support connected measurement systems where its flash capacity accommodates application firmware, configuration data, and protocol handling. For PCB implementation, follow the manufacturer pin-description and land-pattern tables when assigning tracks and decoupling. Pay particular attention to supply-voltage limits, oscillator connections, reset behavior, boot configuration, and exposed ground requirements. Firmware changes should also account for the STM32L152 family option-byte and low-power-mode behavior rather than assuming the behavior of a general-purpose STM32 device. This page combines package, memory, clock, lifecycle, sourcing, and replacement information with application guidance and engineering-oriented comparisons. It also identifies which substitute candidates have documented package and memory compatibility, helping designers distinguish a mechanically similar MCU from a part that can actually be considered for a drop-in redesign.

طلب عرض سعر اتصل بنا
STM32L152CCT6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics
STM32L152CCT6

STM32L152CCT6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics

The STMicroelectronics STM32L152CCT6 is an ultra-low-power 32-bit microcontroller built around an ARM Cortex-M3 core operating up to 32 MHz. It provides 256 Kbytes of Flash memory, 32 Kbytes of SRAM, 8 Kbytes of EEPROM, USB connectivity, LCD support, ADC, DAC and two operational amplifiers, and is supplied in a 48-LQFP 7 x 7 mm package. An ultra-low-power microcontroller is a semiconductor device designed to maintain useful processing performance while minimizing energy consumption during active operation, sleep modes, and standby states. The STM32L1 family combines an Arm Cortex-M3 processor with power-management features intended for battery-operated, portable, industrial, medical, and sensor-based products. STM32L152CCT6 is positioned for designs requiring USB connectivity and a relatively large memory configuration without moving to a higher-performance MCU family. The principal features include 32 MHz maximum CPU frequency, 256 Kbytes of embedded Flash, 32 Kbytes of SRAM, 8 Kbytes of EEPROM, USB, LCD interface capability, 12-bit ADC and DAC resources, and two operational amplifiers. The 48-LQFP package provides a conventional leaded surface-mount format suitable for industrial control boards, instruments, gateways, and compact embedded equipment. Its combination of USB, analog peripherals, and low-power processing makes it useful for portable data-acquisition and connected-control designs. The STM32L152CCT6 uses the Arm Cortex-M3 architecture and supports a broad peripheral set for embedded control. USB connectivity allows the MCU to act as a USB device, while the LCD interface supports display-oriented products. The ADC and DAC provide analog measurement and output capability, and the integrated operational amplifiers can reduce external analog component count in suitable signal-conditioning circuits. Firmware can be organized around standard embedded-control tasks, USB connectivity, display updates, and sensor acquisition rather than requiring separate peripheral devices. Typical applications include industrial sensor nodes, USB-to-serial data acquisition modules, compact instrumentation, medical monitoring equipment, battery-powered handheld products, USB-connected control panels, and low-energy embedded gateways. The 32 MHz core and 256 Kbytes of Flash provide useful headroom for protocol stacks and application firmware. The integrated analog resources are especially helpful where board area, standby power, and component count are important design constraints. When laying out a design, place decoupling capacitors close to each supply pin and route USB differential pairs as a controlled-impedance, tightly coupled pair on a multilayer PCB. Confirm the exact pin assignment and alternate-function requirements in the manufacturer pinout table before assigning LCD, USB, ADC, DAC, or operational-amplifier functions. The MCU also requires the appropriate clock, reset, boot, and programming connections specified by STMicroelectronics. This product summary combines manufacturer family information, distributor attributes, package details, connectivity features, and application-specific design guidance. It is intended to help engineers evaluate STM32L152CCT6 for USB-enabled, low-power embedded systems while separating confirmed device characteristics from parameters that still require review against the complete manufacturer datasheet.

طلب عرض سعر اتصل بنا
STM32L152QCH6 - 32MHz 256KB Flash USB MCU | STMicroelectronics
STM32L152QCH6

STM32L152QCH6 - 32MHz 256KB Flash USB MCU | STMicroelectronics

The STMicroelectronics STM32L152QCH6 is an ultra-low-power 32-bit ARM Cortex-M3 microcontroller operating at 32 MHz with 256 KB of Flash memory in a 132-UFBGA package measuring 7 x 7 mm. It is designed for embedded applications that require USB connectivity, low-power operation, and a compact surface-mount footprint. What is an ultra-low-power microcontroller? An ultra-low-power MCU is a semiconductor controller designed to complete its processing function while consuming minimal energy, especially during sleep, stop, and standby modes. The STM32L1 MCU family combines an ARM Cortex-M3 processor, embedded memory, peripheral interfaces, and power-management capabilities into one device. STM32L152QCH6 belongs to the STM32L15 low-power MCU family and is suited to portable, industrial, sensor, and connected embedded systems. Verified product information identifies a 32-bit ARM Cortex-M3 core, a maximum stated operating frequency of 32 MHz, 256 KB of Flash, USB connectivity, and an 8 microsecond wake-up time. These features support responsive low-power operation while retaining sufficient processing capability for protocol handling, control logic, data acquisition, and low-power communications. The 132-UFBGA package provides a compact 7 x 7 mm solution for space-constrained boards. The STM32L152QCH6 is part of the STM32L15 ultra-low-power platform. Its USB capability makes it relevant to devices requiring a standards-based USB interface, while the microcontroller architecture supports real-time embedded control. Compared with a general-purpose microcontroller, the low-power focus is useful when the duty cycle is intermittent or when battery life, standby consumption, and wake-up behavior are important design objectives. Typical applications include USB-connected sensor nodes, compact industrial controllers, low-power data loggers, medical and diagnostic equipment, portable monitoring devices, and embedded systems that need a small Cortex-M3 controller. The device can serve as a system controller when the application requires USB connectivity and low-power behavior rather than high multimedia processing. Designers should verify the exact pinout, power requirements, clock configuration, USB routing, decoupling, and programming workflow against the STMicroelectronics datasheet before layout or firmware deployment. Because the supplied verified data does not include a complete manufacturer pin table, package dimensions beyond the stated 7 x 7 mm package, or a verified unit-price schedule, those details should not be inferred. The part should be selected only after checking the complete electrical and mechanical requirements for the target design.

طلب عرض سعر اتصل بنا
STM32L152R6T6A - 32KB Flash Cortex-M3 MCU w/ USB & LCD
STM32L152R6T6A

STM32L152R6T6A - 32KB Flash Cortex-M3 MCU w/ USB & LCD

The STMicroelectronics STM32L152R6T6A is an ultra-low-power 32-bit ARM Cortex-M3 microcontroller with 32 KB of Flash, 32 MHz CPU, integrated LCD driver and full-speed USB 2.0 connectivity, housed in a 64-pin LQFP (10x10 mm) package. It is part of the STM32L1 ultra-low-power family with the "-A" automotive suffix, supporting 1.65 V to 3.6 V supply operation and embedding up to 10 KB of SRAM plus 4 KB of true EEPROM. An ARM Cortex-M3 microcontroller is a 32-bit RISC processor core designed for embedded applications that require deterministic real-time response, low interrupt latency, and high code density through the Thumb-2 instruction set. In the broader taxonomy, the STM32L152 sits at the intersection of microcontroller (MCU), ultra-low-power MCU, mixed-signal MCU (with LCD + USB), and 32-bit MCU. The STM32L1 family is the silicon ancestor of the STM32L0, L4, L4+, U5 and H5 lines, all sharing ST's ultra-low-power工艺 philosophy and the Cortex-M lineage. Key differentiating features include five low-power modes (Sleep, Low-Power Sleep, Stop with RTC, Standby with RTC, and Stop without RTC) reaching 1.4 µA in Stop-with-RTC, an integrated LCD driver for up to 8x40 segments directly driving glass, a 12-bit ADC and 12-bit DAC, multiple timers, and a USB 2.0 full-speed device/host/OTG controller. The embedded voltage regulator, multiple DMA controllers, and the standard STM32 peripheral set (USART, SPI, I2C, USB, GPIO) make it a system-in-package for many battery-powered designs. Architecturally, the Cortex-M3 core runs up to 32 MHz with 1.25 DMIPS/MHz, paired with ST's ultra-low-power工艺 and a 1.8 V internal core domain. The ART Accelerator (no instruction-cache pre-fetch on L1, but a flash-accelerator block) keeps execution deterministic from Flash, and the MPU supports up to 8 regions. Compared with the older STM32F1 series, the L1 trades raw MHz for dramatically lower active and standby power. Typical applications include battery-powered metering (gas/water/heat) with direct LCD readout, portable medical sensors, fitness wearables, GPS asset trackers, and industrial sensor nodes requiring USB-CDC for service. The integrated LCD driver saves a costly external charge-pump driver and lets a single chip display digits on a static, multiplexed or capacitive-effect glass. When designing with this device, choose the LQFP-64 (R suffix in the line-up) over QFN if you need hand-rework-friendly pins or expect hand-prototype workflows; QFN variants are footprint-compatible at the die level but require careful PCB thermal design. Verify the LCD glass type (static, 1/2, 1/3, 1/4 duty, and bias) and segment count early in the schematic phase - the LCD peripheral supports up to 8 commons, but pin budget and alternate-function remap must be planned. This page synthesizes distributor pricing, drop-in alternatives across the STM32L1 line, automotive-grade sibling MPNs, and practical low-power design notes that go beyond what is on the ST datasheet alone.

طلب عرض سعر اتصل بنا
STM32L152RBT6 - 32MHz Cortex-M3 USB MCU | STMicroelectronics
STM32L152RBT6

STM32L152RBT6 - 32MHz Cortex-M3 USB MCU | STMicroelectronics

The STMicroelectronics STM32L152RBT6 is a 32-bit Arm Cortex-M3 microcontroller operating at 32 MHz, with 128 KB of Flash memory, 32 KB of SRAM, and USB connectivity in a 64-LQFP 10 x 10 mm package. The STM32L152 series combines an ultra-low-power design with LCD, ADC, DAC, and USB capabilities for compact embedded systems. A microcontroller is a semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. The STM32L152 belongs to the STM32L1 ultra-low-power MCU family and the broader Arm Cortex-M embedded ecosystem. This hierarchy gives designers a compact platform for battery-powered sensors, industrial controls, human-machine interfaces, and USB-connected portable equipment without requiring a separate processor and supporting ICs. The STM32L152RBT6 provides 128 KB of Flash for firmware and 32 KB of SRAM for working memory. Its feature set includes USB, an LCD interface, ADC, and DAC. USB connectivity supports direct peripheral-to-host or peripheral-to-peripheral data exchange, while the LCD interface reduces the component count of display-based products. The ADC and DAC support analog measurement and signal-generation functions around the digital control core. Based on the Arm Cortex-M3 architecture, the device delivers 32-bit processing at 32 MHz. The STM32L152 family is positioned for designs that need more connectivity and analog resources than a basic low-power MCU while retaining a compact 64-pin package. The 64-LQFP package also exposes more I/O than smaller leaded packages, simplifying direct connections to displays, sensors, USB transceivers, and external analog circuitry. Typical uses include low-power data loggers, compact environmental monitors, USB-connected instruments, industrial control modules, and display terminals. The LCD interface is particularly useful for local status displays, while USB can simplify configuration, firmware exchange, or communication with a host computer. The ADC supports sensor conditioning, and the DAC can generate controlled analog output where the application requires it. PCB design should preserve short USB differential traces, provide solid ground-plane continuity, and place decoupling capacitors close to the device power pins. Signal integrity on USB, LCD, and analog interfaces should be checked against the clock, load, and cable requirements of the selected application. Firmware, peripheral configuration, and package-level pin assignments must be reviewed before substituting any electrically related device. This product page consolidates the manufacturer device information, distributor records, package details, comparison parameters, and practical integration guidance into one engineering reference. It also distinguishes exact drop-in candidates from related STM32 variants so engineers can review compatibility rather than relying on package similarity alone.

طلب عرض سعر اتصل بنا
STM32L152RCT6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics
STM32L152RCT6

STM32L152RCT6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics

STMicroelectronics STM32L152RCT6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M3 core, operating at up to 32 MHz with 256 KB of Flash memory in a 64-LQFP 10 x 10 mm package. The device integrates 32 KB SRAM, 8 KB EEPROM, USB, LCD, ADC, DAC, and three operational amplifiers for compact embedded designs. An ultra-low-power microcontroller is an embedded semiconductor that balances processing capability, standby current, active current, and integrated peripherals to serve battery-powered and energy-conscious equipment. The STM32L1 series belongs to the Arm Cortex-M microcontroller family and combines general-purpose control, data acquisition, communications, and low-power operation in one package. The STM32L152RCT6 provides 256 KB of Flash for firmware, 32 KB of SRAM for working memory, and 8 KB of EEPROM for nonvolatile data. Its 32 MHz Cortex-M3 core supports deterministic real-time control, while USB and LCD connectivity broaden its use in portable instruments, human-interface devices, and connected embedded products. Integrated ADC, DAC, and three op-amps reduce the need for external analog components. The STM32L152 family combines conventional embedded-control capabilities with low-power operating modes suited to battery-operated equipment. Its integrated analog resources can support sensor conditioning, signal generation, and direct monitoring of physical inputs, while USB connectivity can simplify attachment to a host computer or USB-powered peripheral. Typical uses include portable medical and industrial measurement equipment, USB-connected data loggers, compact human-interface panels, low-power sensor nodes, and general embedded-control boards. The 64-LQFP package provides enough I/O for mixed analog and digital designs while remaining compatible with standard surface-mount manufacturing. When laying out the board, follow the manufacturer pin-definition and alternate-function tables, place decoupling capacitors close to the supply pins, and preserve the recommended analog-ground and USB-routing topology. Firmware replacement should also account for differences in clock setup, low-power modes, peripheral pin assignments, and USB initialization. This page combines the STM32L152RCT6's core specifications with practical selection guidance, package considerations, and same-footprint replacement analysis for engineers evaluating 64-LQFP STM32L1 designs.

طلب عرض سعر اتصل بنا
STM32L152VCH6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics
STM32L152VCH6

STM32L152VCH6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics

STMicroelectronics STM32L152VCH6 is a 32-bit ARM Cortex-M3 microcontroller with a 32 MHz maximum CPU frequency, 256 KB of Flash memory, and a 100-UFBGA 7 x 7 mm package. It combines an embedded MCU core, program memory, SRAM, and low-power peripherals in a compact surface-mount package suited to space-constrained embedded systems. A microcontroller is a semiconductor device that integrates a CPU, memory, and peripherals into one programmable component. The STM32L152 belongs to STMicroelectronics' STM32L1 family, where low-power design requirements are combined with a 32-bit Cortex-M3 processing architecture. Its position between a general-purpose microcontroller and a dedicated application controller makes it suitable for products that need flexible firmware, low standby power, and multiple communication or sensing functions. The verified device specification identifies a 32-bit Cortex-M3 core, 32 MHz operating frequency, and 256 KB of Flash organized as 256K x 8. The exact SRAM capacity, operating-voltage range, ADC resolution, interface inventory, and detailed timing ratings should be confirmed in the manufacturer datasheet before schematic capture or firmware configuration. The LCD-related description associated with this device further indicates suitability for embedded human-interface applications. The STM32L152VCH6 uses a 100-UFBGA package measuring 7 x 7 mm. This dense land-grid array requires a multilayer PCB with vias, fine-pitch routing, and careful escape routing from the package balls. Unlike a leaded package, the UFBGA has no protruding leads, which supports compact designs but increases assembly and inspection complexity. Typical applications include low-power sensor nodes, industrial monitoring equipment, portable data loggers, medical and health monitoring products, compact control modules, and connected embedded products. The 32 MHz Cortex-M3 core can execute control logic, protocol handling, and display-related tasks, while the low-power STM32L1 platform is appropriate for products that spend substantial time in low-energy operating states. Design work should begin with the manufacturer pin-description table and reference design for the 100-UFBGA footprint. Confirm exposed-pad or thermal-array requirements, power pins, decoupling, programming access, reset behavior, and all peripheral multiplexing before layout release. PCB assembly also requires suitable stencil, paste, reflow, and X-ray inspection plans because the 100-ball geometry can hide solder-joint defects. This product page combines the exact ordering code and verified catalog description with focused guidance on package complexity, low-power design checks, and sourcing workflow. It is intended to help engineers identify the correct MCU, assess board-level implications, and request a quote without replacing the manufacturer datasheet as the final design authority.

طلب عرض سعر اتصل بنا
STM32L152VCT6 - 32MHz Cortex-M3 MCU 256KB Flash | STMicroelectronics
STM32L152VCT6

STM32L152VCT6 - 32MHz Cortex-M3 MCU 256KB Flash | STMicroelectronics

The STMicroelectronics STM32L152VCT6 is an ultra-low-power 32-bit ARM Cortex-M3 microcontroller with 256KB Flash memory, 32KB SRAM, 8KB EEPROM, a 32MHz CPU, USB connectivity, LCD support, and integrated analog peripherals. It is packaged in a 100-lead LQFP package. The STM32L152VCT6 combines low-power operation with the connectivity and analog capabilities required for compact embedded systems, portable instruments, human-interface devices, and USB-connected equipment. An ultra-low-power microcontroller is a semiconductor device designed to minimize energy consumption while maintaining responsive application performance. The STM32L152 series belongs to the ARM Cortex-M3 microcontroller family within the broader embedded-processor and power-management ecosystem. Its combination of sleep modes, fast wake-up capability, USB, LCD support, ADC, DAC, timers, and communication peripherals allows a design to replace several discrete components while conserving board area. Key features include a 32-bit Cortex-M3 processor operating up to 32MHz, 256KB of embedded Flash for firmware, 32KB of SRAM, and 8KB of EEPROM. The device includes USB connectivity, LCD controller support, ADC and DAC resources, and multiple communication interfaces suited to embedded control systems. Its 100-lead LQFP package provides a high pin count for analog, communication, debug, and general-purpose I/O access. The Cortex-M3 architecture provides a compact instruction set, deterministic interrupt handling, and efficient execution of embedded control code. Programmable peripherals and direct memory access support responsive sensor acquisition, communication, display updates, and motor or actuator control. The STM32L152VCT6 is therefore suitable for designs that need more processing capability and connectivity than a basic 8-bit controller while retaining a low-power-oriented platform. Typical applications include USB-connected data loggers, low-power industrial sensor nodes, portable measurement equipment, LCD-based user interfaces, medical monitoring devices, security and access-control terminals, and energy-conscious consumer products. The LCD interface is useful for local status displays, while USB simplifies connection to a host computer or charging and configuration environment. Designers should use the manufacturer pin-description table and reference manual when assigning the 100 LQFP leads, planning power, grounding, clock, and debug connections, and confirming peripheral alternate functions. The 1.8V, 2.5V, and 3.3V supply options support multiple embedded platforms, but the selected regulator, decoupling strategy, and operating voltage must be coordinated with the device's electrical limits. PCB layout should preserve clean analog grounding and controlled clock routing. This product page combines manufacturer specifications, searchable MPN details, application guidance, design notes, and a careful comparison with related STM32L-series devices. It is intended to help engineers identify whether the STM32L152VCT6's balance of Flash memory, USB, LCD support, analog resources, low-power behavior, and LQFP-100 footprint fits the target design.

طلب عرض سعر اتصل بنا
STM32L152VET6 - 32MHz Cortex-M3 512KB MCU | STMicroelectronics
STM32L152VET6

STM32L152VET6 - 32MHz Cortex-M3 512KB MCU | STMicroelectronics

The STMicroelectronics STM32L152VET6 is an ultra-low-power 32-bit Arm Cortex-M3 microcontroller with a 32 MHz CPU, 512 KB of flash memory, USB, two operational amplifiers, and a 100-LQFP 14 x 14 mm package. It belongs to the STM32L1 family of low-power microcontrollers, combining general-purpose embedded processing with analog and connectivity functions in one device. An ultra-low-power microcontroller is an embedded controller designed to maintain accurate operation while minimizing energy consumption during active processing, standby, and low-power modes. Within the product hierarchy, the STM32L152VET6 is a 32-bit microcontroller, a microcontroller IC, a semiconductor, and a member of the Arm Cortex-M and STM32L1 ecosystems. This positioning makes it suitable for portable, industrial, medical, and connected products where energy efficiency and integrated peripherals matter. The 512 KB flash capacity supports substantially larger firmware than smaller STM32L1 variants, while the 32 MHz Cortex-M3 core handles real-time control, communications, and supervisory tasks. Integrated USB, two operational amplifiers, and a 100-pin package reduce the number of discrete components required on the PCB. The broad pin count also exposes more general-purpose I/O than packages with fewer leads, supporting parallel interfaces, analog signals, and multiple peripheral connections. STMicroelectronics positions the STM32L152VE family as an active ultra-low-power Arm Cortex-M3 MCU with 512 KB flash. Its combination of 32-bit processing, integrated analog features, USB connectivity, and a large LQFP footprint supports designs that need both control capability and flexible external interfacing. The STM32L152VET6 suffix identifies the specific ordering configuration, while the functional family designation is STM32L152VE. Typical uses include industrial sensor controllers, USB-connected data loggers, medical monitoring equipment, portable instruments, and low-power embedded systems. The integrated USB is particularly useful for configuration, firmware update, and data transfer, while the operational amplifiers can support analog front ends without adding separate amplifier packages. PCB design should preserve the manufacturer-recommended decoupling and signal-routing layout. USB differential routing requires controlled impedance and minimized branch length, while analog inputs connected to the operational amplifiers should use short traces and a quiet ground reference. Confirm the exact pin assignments, voltage limits, and peripheral multiplexing in the manufacturer datasheet before final routing. This product page consolidates the core MCU specifications, package information, sourcing path, practical application guidance, and verified drop-in alternatives. It also highlights the meaningful distinctions between same-footprint STM32L1 options so engineers can select the correct device without assuming that every 100-LQFP member provides identical USB, analog, or peripheral features.

طلب عرض سعر اتصل بنا
STM32L152ZCT6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics
STM32L152ZCT6

STM32L152ZCT6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics

STMicroelectronics STM32L152ZCT6 is a 32-bit ARM Cortex-M3 microcontroller with a 32 MHz operating frequency, 256 KB of flash memory, and a 144-pin LQFP package measuring 20 mm by 20 mm. The STM32L152 series combines an ultra-low-power microcontroller platform with USB and LCD connectivity, making the device suitable for embedded systems that require a combination of low-power operation, serial connectivity, and a relatively high pin count. A microcontroller is a programmable system-on-chip containing a processor core, memory, and peripherals such as communications interfaces, timers, and analog converters. The STM32L152 belongs to the STM32L1 low-power MCU family, with the Cortex-M3 core providing a 32-bit RISC processing architecture. Its 256 KB program memory is organized as 256K by 8 bits, while the 144-pin package provides access to a broad selection of GPIO and peripheral functions. The verified product data identifies a maximum core frequency of 32 MHz, an operating supply value of 3 V, USB and LCD support, and a fast 8 microsecond wake-up time. These features distinguish the part for portable instruments, connected embedded controls, industrial data-acquisition equipment, and human-machine-interface designs. The USB interface can support direct host or device connectivity, while LCD connectivity reduces the component count required for display-based products. The Cortex-M3 core executes 32-bit instructions and operates at 32 MHz. The STM32L152 is positioned as an ultra-low-power platform, making power-conscious operation a central design consideration alongside processing performance. The manufacturer datasheet should be consulted for detailed clock-tree limits, peripheral electrical characteristics, GPIO alternate-function assignments, current consumption, and operating-temperature limits that are not included in the supplied distributor summaries. Typical uses include USB-connected portable measurement devices, industrial control panels with LCD feedback, data loggers, low-power sensor nodes, and embedded human-machine interfaces. The 144-pin LQFP package offers extensive I/O capacity compared with smaller MCU packages, although its 20 mm by 20 mm footprint requires more PCB area than QFN alternatives. The package also provides exposed leads that simplify visual inspection and rework compared with fine-pitch no-lead packages. Designers should verify every assigned pin against the STM32L152ZCT6 pinout and alternate-function tables before PCB release. Pay particular attention to USB signal routing, analog inputs, oscillator connections, supply pins, and debugging functions. Because only summarized source data is available here, voltage tolerances, RAM capacity, GPIO count, ADC channels, and package-specific thermal limits must be confirmed from the manufacturer datasheet rather than inferred from the product family. This product page consolidates verified distributor specifications, pricing, package information, practical design guidance, and same-footprint family alternatives. It also distinguishes confirmed values from parameters that still require datasheet verification, helping engineers make procurement and design decisions without relying on unsupported assumptions.

طلب عرض سعر اتصل بنا
STM32L152ZDT6 - 32MHz Cortex-M3 USB MCU | ST
STM32L152ZDT6

STM32L152ZDT6 - 32MHz Cortex-M3 USB MCU | ST

STMicroelectronics STM32L152ZDT6 is an ultra-low-power 32-bit microcontroller with an Arm Cortex-M3 core, a maximum 32 MHz operating frequency, 384 KB of Flash memory, USB connectivity, and 144 leads in an LQFP 20 x 20 mm package. It combines an 8 μs wake-up time with low-power operating modes for responsive, energy-conscious embedded systems. The STM32L152ZDT6 also provides an RTC, LCD support, analog functions, 10 serial ports, and a memory interface within a single integrated circuit. What is an ultra-low-power microcontroller? An ultra-low-power microcontroller is a semiconductor controller designed to execute firmware while minimizing energy consumption, particularly during idle, sleep, and standby periods. In the device hierarchy, the STM32L152ZDT6 is an Arm Cortex-M3 microcontroller, a 32-bit reduced-instruction-set processor platform, within the STM32 family of embedded processors and the broader category of embedded semiconductors. Its combination of USB connectivity, real-time-clock capability, analog functions, and low-power wake-up makes it suitable for connected embedded equipment that must balance responsiveness with restricted energy budgets. Key features include the 32 MHz Arm Cortex-M3 processor, 384 KB of Flash memory, and integrated USB connectivity. The 10 serial ports support multiple communication tasks without requiring a separate protocol controller. An RTC provides timekeeping for data logging, alarms, and scheduled operations, while LCD support can simplify instrument and human-interface designs. The manufacturer material also identifies analog functions, a memory interface, seven low-power modes, and an 8 μs wake-up time as defining characteristics of the STM32L152xD family. Technically, the STM32L152ZDT6 belongs to the STM32L1 low-power microcontroller family and supports operation at up to 32 MHz. Its extensive peripheral integration reduces the number of external devices required in USB-connected embedded products. The 144-LQFP package also provides a large pin count, supporting the family connectivity, analog, timing, and memory-interface functions. The supplied source data confirms the 384 KB Flash configuration but does not specify RAM capacity, exact analog converter performance, pin assignments, or detailed absolute maximum ratings; these values must be confirmed in the manufacturer documentation. Typical applications include low-power USB data loggers, industrial sensing nodes, battery-powered instruments, LCD-equipped control panels, and connected embedded accessories. In each case, the combination of USB, RTC, serial interfaces, analog functions, and fast wake-up can reduce board complexity. Designers should also evaluate whether the 384 KB Flash configuration is sufficient for the firmware image, USB stack, bootloader, diagnostics, and application data before committing to a PCB layout. A key design consideration is that firmware, USB enumeration, clock configuration, and low-power state transitions must be coordinated to obtain the intended energy profile. USB connection can influence whether the device remains in a low-power state, so the application should use the manufacturer's clock, GPIO, and low-power recommendations. Decoupling, exposed-pad or thermal considerations, and signal routing should be designed from the complete package documentation rather than inferred from the distributor summaries. This page consolidates verified distributor and manufacturer information, a 144-LQFP package identity, pricing evidence, application guidance, and a documented scarcity of verified drop-in alternatives. It also separates confirmed STM32L152ZDT6 characteristics from parameters that still require engineering verification, helping procurement and design teams make traceable engineering decisions without treating generic STM32 alternatives as automatic replacements.

طلب عرض سعر اتصل بنا
STM32L162QCH6 - 32MHz Cortex-M3 MCU | STMicroelectronics
STM32L162QCH6

STM32L162QCH6 - 32MHz Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32L162QCH6 is an ultra-low-power, 32-bit ARM Cortex-M3 microcontroller with 256 KB of Flash memory, 32 MHz processing, and a 132-pin UFBGA package. It is designed for embedded systems that need a combination of low-power operation, USB connectivity, LCD support, analog conversion, cryptography, and a broad set of serial interfaces. An ultra-low-power microcontroller is a semiconductor device designed to minimize energy consumption during active operation, standby, and low-power modes. STM32L1 devices belong to the broader hierarchy of ARM Cortex-M3 microcontrollers, embedded processors, and semiconductor control components. This makes the STM32L162QCH6 relevant to battery-powered instruments, industrial controls, medical equipment, connected sensors, and compact human-interface systems. Verified listing data identifies a 32-bit Cortex-M3 core operating at 32 MHz, 256 KB Flash, 32 KB SRAM, and 8 KB EEPROM. The device also includes USB, LCD, ADC, DAC, and AES-128 hardware acceleration according to the available technical summaries. Its 2.5 V to 3.3 V supply description reflects a low-voltage embedded platform intended for efficient digital control and mixed-signal designs. The STM32L162QCH6 provides 132 package connections, allowing integration of multiple I/O resources and communication peripherals on a compact surface-mount footprint. The verified distributor listing identifies the package as 132-UFBGA, while another result describes the same device as a 132-pin package. The package pinout and exact electrical limits should be confirmed against the manufacturer datasheet before PCB release. Typical applications include USB-connected portable instruments, low-power sensor nodes, LCD-based user interfaces, industrial monitoring systems, and secure embedded controllers. Compared with a general-purpose Cortex-M3 MCU, the STM32L162 family is positioned around low-power operation and integrated features such as LCD, USB, DAC, and AES-128 support. Designers should preserve the manufacturer-recommended decoupling, clock, reset, and exposed-power connections. USB signal routing requires controlled impedance and short traces, while low-power and analog sections should be separated carefully to reduce noise coupling. Validate final firmware against the exact order code and package variant. This page consolidates verified distributor specifications, sourcing information, application guidance, and drop-in-alternative validation limits for STM32L162QCH6. It is intended to support engineering comparison, procurement review, and preliminary design work rather than replace the manufacturer datasheet or qualification process.

طلب عرض سعر اتصل بنا
STM32L162QDH6TR - 384KB Flash Cortex-M3 MCU | STMicroelectronics
STM32L162QDH6TR

STM32L162QDH6TR - 384KB Flash Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32L162QDH6TR is an ultra-low-power ARM Cortex-M3 microcontroller with 384 Kbytes of Flash and 32 Kbytes of SRAM, housed in a 132-ball UFBGA (7x7 mm) package. It runs at up to 32 MHz, integrates an integrated LCD controller (up to 8x40 segments), USB 2.0 Full-Speed, AES-128 hardware encryption, and a rich analog/digital peripheral set, making it well suited to mid-RAM-profile battery-powered sensing and control applications. A Cortex-M3 microcontroller is a 32-bit ARM processor core (ARMv7-M architecture) with Thumb-2 instruction support, designed for deterministic embedded workloads with low interrupt latency. It sits in a hierarchy of MCU -> 32-bit MCU -> ARM Cortex-M -> low-power MCU, and the STM32L1 family specifically targets ultra-low-power applications consuming as little as sub-uA in standby while integrating rich analog peripherals that would normally require external ICs. Key features include ARM Cortex-M3 core running up to 32 MHz, 384 KB Flash, 32 KB SRAM, 12 KB EEPROM (true data EEPROM, emulated), an integrated USB 2.0 FS device/host/OTG controller, AES-128 hardware crypto block, two operational amplifiers, two 12-bit DACs, two 12-bit ADCs (1 Msps), two comparators, RTC, and seven low-power modes (Low-power Run, Sleep, Low-power Sleep, Stop with RTC, Standby with RTC, Standby). Operating voltage is 1.8 V to 3.6 V with BOR enable. The architecture combines a Cortex-M3 core, integrated voltage regulator with multiple low-power domains, an ART Accelerator-style flash front-end, and a flexible DMA matrix (7 channels). The peripheral set - timers (general-purpose, basic, systick), SPIs (3x), I2C (2x), USARTs (3x), USB, CAN, SDIO, and FSMC - is coherently mapped to a 132-pin BGA footprint that exposes up to 106 fast GPIOs. Typical applications include portable medical and health-monitoring devices, smart-metering and industrial sensor hubs, wearables, USB peripherals running from battery, secure IoT end-nodes leveraging the AES engine, and LCD-panel human-machine interfaces (HMIs). The 132-ball UFBGA is preferred over LQFP for space-constrained handhelds and wearables where every square millimeter matters. When designing with this part, pay close attention to decoupling: a 100 nF ceramic must sit within 2 mm of each VDD/VDDA pin pair, and the integrated regulator requires its own bulk + bypass network. The datasheet's application circuit shows a typical ultra-low-power sensor node with the MCU spending most of its time in Stop-mode with RTC, waking on a comparator interrupt for sub-uW average draw. This page synthesizes distributor pricing, drop-in alternatives in the same STM32L1 family, and practical design notes not consolidated on any individual manufacturer or distributor page.

طلب عرض سعر اتصل بنا
STM32L162RCT6 - Ultra-Low-Power ARM Cortex-M3 MCU | STMicroelectronics
STM32L162RCT6

STM32L162RCT6 - Ultra-Low-Power ARM Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32L162RCT6 is an ultra-low-power 32-bit microcontroller based on the ARM Cortex-M3 core, operating at frequencies up to 32 MHz. It features 256 KB of Flash memory and 32 KB of SRAM, along with a rich set of peripherals including USB, LCD, and AES encryption. The device is housed in a 64-pin LQFP package, making it suitable for space-constrained applications. An ultra-low-power microcontroller (MCU) is a system-on-chip that integrates a processor core, memory, and peripherals, designed to minimize energy consumption while maintaining computational capability. The STM32L1 series is STMicroelectronics' flagship low-power family, targeting battery-powered and energy-harvesting applications. It sits within the broader hierarchy of embedded microcontrollers, which are the building blocks of IoT devices, portable medical equipment, and smart sensors. Key features of the STM32L162RCT6 include multiple low-power modes (Sleep, Low-power Run, Low-power Sleep, Stop with RTC, Standby with RTC), a 12-bit ADC with 1 Msps, a 12-bit DAC, and an embedded AES-128 encryption engine. The device also integrates a real-time clock (RTC) with calendar and alarm functions, and supports a wide supply voltage range from 1.8V to 3.6V. The ultra-low-power design achieves a typical current consumption of 3.4 µA in Stop mode with RTC, and 0.27 µA in Standby mode. The STM32L162RCT6 is built on a 130nm low-leakage process technology, which is optimized for minimal static power consumption. The architecture includes a flexible clock tree with multiple internal and external oscillators, allowing designers to trade off performance for power. The AES hardware accelerator offloads cryptographic operations from the CPU, reducing energy consumption for secure communication. Typical applications include smart meters, medical devices (e.g., glucose monitors, hearing aids), industrial sensors, and portable consumer electronics. The integrated LCD controller supports up to 8x40 segments, making it ideal for battery-powered displays. The USB 2.0 full-speed device interface enables direct connectivity to hosts for data logging and firmware updates. When designing with this device, careful attention should be paid to the power supply decoupling and the selection of low-power modes to maximize battery life. The use of the internal low-speed oscillator (LSI) for the RTC can reduce external component count, but an external 32.768 kHz crystal provides better accuracy for timekeeping applications.

USD $2.86 اتصل بنا
STM32L162RET6 - Ultra-Low-Power ARM Cortex-M3 MCU | STMicroelectronics
STM32L162RET6

STM32L162RET6 - Ultra-Low-Power ARM Cortex-M3 MCU | STMicroelectronics

The STMicroelectronics STM32L162RET6 is an ultra-low-power 32-bit microcontroller based on the ARM Cortex-M3 core, operating at up to 32 MHz. It features 512 KB of Flash memory and 80 KB of SRAM, along with a rich set of peripherals including USB, LCD, and AES encryption. The device is housed in a 64-pin LQFP package (LQFP64) and is designed for battery-powered and energy-efficient applications. An ultra-low-power microcontroller (MCU) is a type of embedded processor optimized for minimal power consumption, often featuring multiple low-power modes, low supply voltages, and efficient clock management. These MCUs are essential in battery-operated devices, IoT sensors, and portable medical equipment where extending battery life is critical. The STM32L1 series sits within the broader STM32 family, which spans from low-power to high-performance Cortex-M based MCUs, and is part of the ARM Cortex-M ecosystem. Key features of the STM32L162RET6 include a 32 MHz ARM Cortex-M3 core with memory protection unit (MPU), 512 KB Flash, 80 KB SRAM, and a comprehensive set of peripherals: USB 2.0 full-speed device, LCD controller supporting up to 8x40 segments, AES-128 hardware encryption, 12-bit ADC, 12-bit DAC, multiple timers, and communication interfaces (USART, SPI, I2C). It operates from 1.8V to 3.6V supply and features several low-power modes: Sleep, Low-power Run, Low-power Sleep, Stop with RTC, and Standby, with current consumption as low as 0.3 uA in Standby mode. The STM32L162RET6 is built on ST's ultra-low-power technology, which combines a low-leakage process with dynamic voltage scaling and a flexible clock gating architecture. This enables the MCU to achieve industry-leading energy efficiency, with a typical active-mode current of 230 uA/MHz. The integrated AES-128 encryption engine provides hardware-accelerated security for data protection, making it suitable for secure communication and authentication applications. Typical applications include smart meters, medical devices (e.g., glucose monitors, hearing aids), industrial sensors, IoT nodes, and portable consumer electronics. The LCD controller and USB interface make it ideal for human-machine interface (HMI) applications, while the AES engine supports secure data logging and communication. When designing with this device, pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 4.7 uF capacitor at the main supply. Use the low-power modes effectively by configuring the RTC and wake-up sources to minimize average current consumption. The STM32L162RET6 is available in LQFP64 package, which is pin-compatible with other STM32L1 series devices in the same package, allowing easy migration.

طلب عرض سعر اتصل بنا
STM32L162VCT6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics
STM32L162VCT6

STM32L162VCT6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics

The STMicroelectronics STM32L162VCT6 is an ultra-low-power 32-bit microcontroller built around a 32 MHz Arm Cortex-M3 core, with 256 KB of embedded Flash memory and USB connectivity in a 100-pin LQFP package measuring 14 x 14 mm. The STM32L162 is positioned for connected low-power embedded products that require secure data handling, efficient peripheral integration, and a broad supply-voltage range. According to the manufacturer product page, the STM32L162 family adds 128-bit AES hardware encryption to the STM32L151 and STM32L152 feature set. The device is identified in distributor data as the STM32L1 series member with LCD and USB capability, making it suitable for compact user-interface, security, data-acquisition, and connected-control systems. Its 256 KB program-memory configuration provides more application-code headroom than entry-level STM32L1 devices while retaining the low-power characteristics of the family. The Cortex-M3 processor uses the ARM Thumb instruction set and provides deterministic interrupt handling for real-time peripherals, sensor interfaces, communications links, and display updates. Verified distributor records identify the device as an ARM Cortex-M3 microcontroller operating at 32 MHz with 256 KB of Flash in a 100-LQFP industrial package. Electrical operating details such as exact RAM capacity, complete voltage limits, temperature range, and peripheral pin assignments are not included in the supplied source extract and should be confirmed against the manufacturer datasheet before design release. This STM32L162VCT6 combines a high-clock-rate 32-bit core with integrated cryptographic hardware and USB in a surface-mount LQFP-100 package. The 14 x 14 mm footprint supports mainstream automated assembly while exposing substantially more I/O than smaller 48-pin and 64-pin STM32 devices. It is therefore relevant to LCD-equipped instruments, industrial controllers, low-power data loggers, USB-connected sensors, secure access terminals, and compact gateways requiring more GPIO than an entry-level microcontroller package can provide. STM32L162VCT6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics. The main design trade-off is package size: compared with a smaller STM32L1 option, the LQFP-100 offers broader peripheral access but demands a larger PCB footprint and more careful high-speed signal layout. Compared with larger STM32F devices, it provides lower-power-oriented integration and on-chip AES support, while its 256 KB Flash capacity is more limited than high-end Cortex-M families. For USB or LCD designs, use the datasheet pin table and reference design guidance to plan decoupling, signal routing, firmware support, and peripheral conflicts. This page consolidates distributor data, manufacturer positioning, same-family drop-in candidates, and practical selection guidance that is not presented as a single consolidated value in the manufacturer datasheet.

طلب عرض سعر اتصل بنا
STM32L162VET6 - 512KB Flash Ultra-Low-Power MCU | STMicroelectronics
STM32L162VET6

STM32L162VET6 - 512KB Flash Ultra-Low-Power MCU | STMicroelectronics

The STM32L162VET6 is an ultra-low-power 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M3 core running at up to 32 MHz. It integrates 512 KB of Flash memory and 80 KB of SRAM, along with a rich set of peripherals including USB, LCD controller, AES encryption, and multiple communication interfaces. Housed in a 100-pin LQFP package, this device is designed for battery-powered and energy-efficient applications. An ultra-low-power microcontroller (MCU) is a system-on-chip that combines a processor core, memory, and peripherals while minimizing power consumption to extend battery life. The STM32L1 series is STMicroelectronics' flagship ultra-low-power family, positioned within the broader hierarchy of microcontrollers -> 32-bit MCUs -> ARM Cortex-M based MCUs -> STM32 family. These devices are essential in IoT, wearable, and portable medical devices where energy efficiency is critical. Key features include multiple low-power modes (Sleep, Low-power Run, Low-power Sleep, Stop with RTC, Standby with RTC), a 12-bit ADC with hardware oversampling, a 12-bit DAC, an LCD driver supporting up to 8x40 segments, and an AES-128 hardware encryption engine. The device operates from 1.8V to 3.6V and supports a wide temperature range of -40°C to +85°C. Its ultra-low-power design achieves 230 µA/MHz in Run mode and 0.3 µA in Standby mode with RTC, making it ideal for energy-harvesting and long-life battery applications. The STM32L162VET6 is built on a 130nm ultra-low-leakage process technology, enabling industry-leading power efficiency. The Cortex-M3 core includes a memory protection unit (MPU) and supports single-cycle multiplication and hardware division. The device features a flexible clock tree with multiple internal and external oscillators, including a 32 kHz RTC oscillator and a 16 MHz HSI RC oscillator, allowing designers to optimize performance versus power consumption. Typical applications include smart meters, medical devices such as glucose monitors and hearing aids, industrial sensors, and portable consumer electronics. The integrated LCD controller and AES encryption make it particularly suitable for secure, display-equipped battery-powered devices. The USB 2.0 full-speed interface with internal PHY enables direct connectivity to hosts for data logging and firmware updates. When designing with this MCU, careful attention to the power supply decoupling and clock configuration is essential. Use a 1 µF and 100 nF capacitor pair on each VDD pin, and select the appropriate low-power mode based on wake-up latency requirements. The STM32L162VET6 supports in-application programming (IAP) via USART, SPI, or USB, facilitating field firmware updates.

طلب عرض سعر اتصل بنا
STM32L162ZD - 384KB Flash Cortex-M3 MCU w/ LCD | STMicro
STM32L162ZD

STM32L162ZD - 384KB Flash Cortex-M3 MCU w/ LCD | STMicro

The STMicroelectronics STM32L162ZD is an ultra-low-power Arm Cortex-M3 microcontroller with 384 Kbytes of Flash memory, 32 MHz CPU, integrated LCD driver, USB 2.0 full-speed, three operational amplifiers, and hardware AES-128 encryption, packaged in a 144-pin LQFP (20x20 mm). It belongs to the STM32L1 series, designed for energy-sensitive applications where sleep-mode current and active-mode efficiency are critical design parameters. A microcontroller (MCU) is a single-chip computer integrating a CPU core, Flash program memory, SRAM data memory, and a rich set of peripherals such as timers, ADC/DAC, communication interfaces (UART/SPI/I2C/USB/CAN), and I/O ports. The STM32L1 family is built around the Cortex-M3 core and is positioned as an ultra-low-power platform — sitting in the broader hierarchy of ARM Cortex-M MCUs -> 32-bit microcontrollers -> embedded processors. The STM32L162ZD specifically adds USB, AES, LCD segment driver, three rail-to-rail op-amps, and 12 Kbytes of true EEPROM emulation on top of 48 Kbytes SRAM. Key features include 384 Kbytes of Flash, 48 Kbytes of SRAM, 12 Kbytes of EEPROM, Cortex-M3 with FPU-less MPU running up to 32 MHz, up to 114 general-purpose I/Os, a 12-bit ADC (1 Msps), two 12-bit DACs, two comparators, two op-amps (plus one more for signal conditioning), a segment LCD driver supporting up to 8x40 segments, USB FS device, three I2C, two SPI, three USART plus two UARTs, one CAN, AES-128 hardware crypto, and a real-time clock with calendar. The seven main low-power modes (Sleep, Low-power sleep, Stop with RTC, Standby with RTC, Stop without RTC, Standby without RTC, and Power-down) draw as little as a few microamperes with RTC retention. The STM32L162 line uses a 1.8 V to 3.6 V supply range and is engineered around the ST ultra-low-leakage 130 nm process with on-chip voltage scaling. The integrated op-amps and comparators remove the need for external analog front-end circuitry in sensor-conditioning applications, while the AES block accelerates encrypted communication without loading the CPU. The flexible static memory controller (FSMC) enables external SRAM/NOR/NAND expansion when design requirements exceed the on-chip 384 Kbytes. Typical applications include battery-powered IoT nodes, portable medical monitors, smart meters, industrial sensor hubs, USB peripherals, and LCD-keypad user-interface modules. The combination of op-amps, ADC, DAC, and AES makes it especially suitable for secure wireless sensor nodes (paired with an external RF transceiver) and battery-backed metering systems with segmented LCD displays. When designing with this MCU, provide a clean 3.3 V LDO and place decoupling capacitors (100 nF + 4.7 uF bulk) within 5 mm of every VDD/VSS pair. The BOOT0 pin must be pulled correctly for production firmware boot, and unused I/Os should be configured as analog inputs to minimize leakage. Note that operating frequency at full 32 MHz requires VDD >= 2.1 V to stay within the voltage-scaling range. This page consolidates distributor pricing for the STM32L162ZD, identifies verified drop-in alternatives in the STM32L1 family and across-brand second sources, and packages practical design notes (decoupling, low-power mode entry/exit, op-amp biasing) that go beyond what the manufacturer datasheet alone provides.

طلب عرض سعر اتصل بنا
STM32L162ZDT6 - 32MHz Cortex-M3 MCU 384KB Flash USB AES | STMicroelectronics
STM32L162ZDT6

STM32L162ZDT6 - 32MHz Cortex-M3 MCU 384KB Flash USB AES | STMicroelectronics

The STMicroelectronics STM32L162ZDT6 is an ultra-low-power ARM Cortex-M3 32-bit microcontroller with 384KB Flash, 32 MHz CPU, USB 2.0 full-speed, hardware AES-128, segment LCD driver, RTC and 144-pin LQFP package. According to ST product documentation, the part integrates 384 KB of Flash, 48 KB of SRAM, 12-bit ADC, 12-bit DAC, multiple comparators, USB, USART, SPI, I2C, timers and AES, all in a 20x20 mm 144-LQFP. What is an ultra-low-power microcontroller? An ultra-low-power microcontroller is a category of embedded MCU optimized to consume the least energy in active and sleep modes. It belongs to the broader taxonomy microcontroller -> embedded processor -> semiconductor device. The STM32L1 family positions itself for battery-powered applications where every microamp counts, including metering, medical portables, IoT sensors and wearable electronics. Key features include 7 low-power modes, RTC with backup registers, integrated LCD driver up to 8x40, AES-128 hardware accelerator, USB 2.0 full-speed device with on-chip PHY, 12-bit ADC and DAC, multiple comparators, and up to 114 general-purpose I/Os on the 144-LQFP variant. The ARM Cortex-M3 core runs at 32 MHz, providing 1.25 DMIPS/MHz while drawing roughly 230 uA/MHz active, an order of magnitude lower than legacy Cortex-M3 microcontrollers. The device is built on a 130 nm ultra-low-leakage CMOS process with embedded Flash, and supports 1.8 V to 3.6 V supply operation. The architecture includes a nested vectored interrupt controller, bit-banding, MPU, and JTAG/SWD debug interfaces. Hardware AES-128 accelerates encryption with zero CPU load, while the LCD controller with charge pump drives segment displays directly. Typical applications include battery-powered medical instruments, wireless sensor nodes, smart metering, industrial control with HMI segment displays, asset tracking, and USB-enabled data loggers. The 384 KB Flash supports rich application firmware with over-the-air upgrade capability and protocol stacks such as USB, BLE through SPI, or LoRaWAN via external transceiver. When designing with the STM32L162ZDT6, carefully select the appropriate low-power mode (Stop, Standby, Sleep) based on wake-up latency and residual current budget. The USB peripheral requires a 1.5 kohm pull-up and proper PCB stack-up for signal integrity; the AES engine uses 128-bit key only. This page synthesizes distributor pricing, parametric comparison, and drop-in alternatives not found in the manufacturer datasheet. Engineers should cross-check the latest datasheet revision and errata before committing to a design.

طلب عرض سعر اتصل بنا
STM32L412C8T6 - 80MHz Cortex-M4 MCU 64KB LQFP-48 | STMicroelectronics
STM32L412C8T6

STM32L412C8T6 - 80MHz Cortex-M4 MCU 64KB LQFP-48 | STMicroelectronics

The STMicroelectronics STM32L412C8T6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with FPU, operating at up to 80 MHz and packaged in a 48-pin LQFP (T6) form factor. It integrates 64 Kbytes of Flash, 40 Kbytes of SRAM, and the STM32L4 family's signature FlexPowerControl architecture with an operating voltage range of 1.71 V to 3.6 V. What is an ultra-low-power Cortex-M4 MCU? This category of microcontroller combines a high-performance 32-bit Arm processing core (Cortex-M4 with single-precision FPU and DSP extensions) with extensive power-saving modes that allow it to draw microamps or even nanoamps in standby. In the broader semiconductor taxonomy, it sits below MCU > microcontroller > 32-bit embedded controller > semiconductor. STM32L412 parts target battery-powered and energy-harvesting designs where the M4's DSP/Math throughput is required but quiescent current must remain in the nA range. Key features of the STM32L412C8T6 include a USB 2.0 Full-Speed device interface (no host/OTG), up to 12 timers, a 12-bit ADC with up to 16 channels (5 Msps), two 12-bit DACs, two comparators, two operational amplifiers, a real-time clock with calendar, and 32x32-bit backup registers. ST's Chrom-GRC advanced peripherals also include an AES-256 hardware crypto accelerator and a true random number generator (TRNG) for IoT security. The architecture pairs a Cortex-M4 core running at 80 MHz (100 DMIPS / 273 CoreMark) with ST's low-power process technology. Seven low-power modes (including Shutdown at 16 nA typical, Standby at 300 nA typical, and VBAT mode at 300 nA for RTC retention) let system designers trade wake-up latency against quiescent current. The on-chip voltage regulator scales dynamically with load, and VBAT mode retains RTC and backup registers directly from a coin cell. Typical applications include battery-powered IoT sensor nodes, USB-C HID interfaces, wearable health monitors, industrial wireless sensors, asset tracking beacons, smart metering, and human-machine interface (HMI) controllers. The FPU and DSP extensions make it well suited for compact digital signal processing such as sensor fusion and predictive maintenance algorithms. When designing with this part, prioritize decoupling the VDDA supply with a 100 nF X5R ceramic placed within 2 mm of the pin. Ensure SWDIO/SWDCLK lines are routed short and away from switching nodes to avoid debug-acquisition noise. This page synthesizes real distributor pricing, drop-in compatible alternatives (same-brand STM32L4 family and cross-brand pin-compatible parts), and design notes not aggregated on a single manufacturer page.

طلب عرض سعر اتصل بنا
STM32L412CBT6 - 80MHz Cortex-M4 MCU 128KB | ST
STM32L412CBT6

STM32L412CBT6 - 80MHz Cortex-M4 MCU 128KB | ST

STMicroelectronics STM32L412CBT6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 processor, operating at up to 80 MHz, with 128 KB of flash memory in a 48-LQFP 7 x 7 mm package. The STM32L412 series combines a compact 7 x 7 mm footprint with USB connectivity and low-power-oriented system features for embedded control, sensing, communications, and compact consumer equipment. An ultra-low-power microcontroller is a semiconductor device designed to complete control tasks while minimizing energy consumption during idle, sleep, and active operating periods. Within the embedded-system hierarchy, a microcontroller integrates a processor core, flash memory, RAM, clocks, communications peripherals, timers, and general-purpose input/output functions onto one package. The STM32L412 series uses the Arm Cortex-M4 32-bit RISC core, a widely adopted architecture for real-time control systems that balance processing capability, software ecosystem maturity, and low-power operation. The STM32L412CBT6 runs at up to 80 MHz and provides 128 KB of internal flash memory. Its 48-LQFP package is 7 x 7 mm, making it considerably smaller than many leaded microcontroller packages while retaining a conventional surface-mount assembly format. Mouser identifies this device as an ultra-low-power MCU with FPU, Arm Cortex-M4, 80 MHz operation, 128 KB flash, and USB capability. These characteristics support compact control boards that need moderate computation, serial communication, and efficient peripheral integration. The 32-bit Cortex-M4 processing core supports deterministic embedded-control workflows and includes an Arm floating-point unit according to the distributor listing. A single package therefore provides the central processing unit, nonvolatile program storage, GPIO, timers, serial interfaces, USB, and low-power control resources. This integration reduces the number of discrete components required for compact sensor nodes, USB-connected accessories, instrumentation modules, and low-power IoT terminals. Typical uses include USB peripheral control, low-power sensor hubs, compact industrial monitoring equipment, consumer accessories, communication modules, and general-purpose embedded control. The 80 MHz operating rate provides practical margin for protocol handling, control-loop execution, and human-interface tasks. The 128 KB flash capacity supports embedded firmware, configuration data, and application code, while the 48-LQFP outline simplifies inspection and rework compared with very small leadless packages. PCB design should preserve clean routing for USB and clock signals, provide the decoupling network specified by the manufacturer, and verify all exposed-pin assignments against the device pinout. Because the part is offered in a 7 x 7 mm LQFP, pad geometry and paste design should follow the package drawing rather than relying on a generic footprint. Confirm the required peripheral mix, firmware support, temperature grade, and USB implementation before releasing a production design. This product record combines manufacturer positioning, verified distributor specifications, package details, practical design guidance, and same-brand drop-in alternatives. It also highlights which parameters require confirmation from the full STM32L412 technical documentation, helping engineers evaluate the MCU without relying on abbreviated catalog descriptions alone.

طلب عرض سعر اتصل بنا
STM32L412CBU6 - 80MHz Cortex-M4 128KB Flash MCU | STMicroelectronics
STM32L412CBU6

STM32L412CBU6 - 80MHz Cortex-M4 128KB Flash MCU | STMicroelectronics

The STMicroelectronics STM32L412CBU6 is an ultra-low-power 32-bit ARM Cortex-M4 microcontroller with FPU, operating at up to 80 MHz, integrating 128 KB of Flash and 40 KB of SRAM in a 48-pin UFQFPN (7x7 mm) package. It targets battery-powered and energy-harvesting applications where every microamp counts, featuring FlexPowerControl with a 1.71V to 3.6V supply range and a 16 nA Shutdown current with four wakeup pins. An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core designed for embedded systems, combining high computational performance with low power consumption. The Cortex-M4 specifically adds a single-precision floating-point unit (FPU) and DSP extensions, making it suitable for signal-processing tasks. The STM32L4 family further extends the architecture with ultra-low-power techniques (FlexPowerControl), placing it in the broader hierarchy of microcontroller -> embedded processor -> semiconductor device, optimized for IoT and wearable segments. Key features include a Cortex-M4 core with FPU delivering 100 DMIPS, 128 KB Flash with ECC, 40 KB SRAM, USB 2.0 Full-Speed with crystal-less operation, two DACs, one 12-bit ADC (5 Msps), two comparators, two operational amplifiers, and a built-in SMPS step-down converter for internal core supply. The UFQFPN-48 footprint integrates 38 GPIO pins supporting I2C, SPI, USART, LPUART, USB and CAN interfaces. The SMPS bypass mode enables direct core supply from a coin-cell or super-capacitor backup domain, while the VBAT mode retains 32x32-bit backup registers and the RTC drawing only 300 nA. Housed in a UFQFPN-48 package with a small 7x7 mm body, the device also features a true random number generator (TRNG), 128-bit AES hardware accelerator, and capacitive touch sensing support. Typical applications include wearable health sensors, low-end smart watches, industrial sensor nodes, USB-powered devices, smart metering, and battery-powered IoT endpoints. The combination of Cortex-M4 performance and sub-microamp standby modes makes the part particularly suited to products that wake briefly to perform a measurement, then return to deep sleep. When laying out the PCB, ensure the UFQFPN-48 exposed pad is soldered to a properly sized ground plane with thermal vias to limit junction temperature. Decouple VDD with 100 nF + 1 uF ceramics close to each supply pin, and follow ST reference designs for the SMPS inductor selection if the internal regulator is used.

طلب عرض سعر اتصل بنا
STM32L412K8T6 - 80MHz Cortex-M4 64KB MCU | STMicroelectronics
STM32L412K8T6

STM32L412K8T6 - 80MHz Cortex-M4 64KB MCU | STMicroelectronics

The STMicroelectronics STM32L412K8T6 is an ultra-low-power 32-bit microcontroller built around an Arm Cortex-M4 processor operating up to 80 MHz, with 64 KB of Flash and a 32-LQFP 7 x 7 mm package. It operates from a 1.71 V to 3.6 V supply and supports temperature ranges of -40 °C to 85 °C or -40 °C to 125 °C, depending on the ordering variant. The STM32L412K8T6 combines low-power operation, USB connectivity, and a compact 32-pin surface-mount footprint for embedded control designs. What is an ultra-low-power microcontroller? An MCU is an integrated semiconductor that contains a processor core, Flash memory, RAM, peripherals, and communication interfaces on one device. An ultra-low-power MCU adds optimized sleep, shutdown, and low-current operating modes to extend battery life in portable, sensor, and industrial monitoring systems. The STM32L412K8T6 belongs to the STM32L4 microcontroller family and is designed for applications requiring low power consumption and efficient real-time control. The STM32L412K8T6 provides an Arm Cortex-M4 core with floating-point capability, operating at up to 80 MHz. The verified product data identifies 64 KB Flash memory and a 32-LQFP package. Its supply range of 1.71 V to 3.6 V supports low-voltage designs, while the documented VBAT mode consumes 300 nA for RTC and backup-register operation. Shutdown mode is specified at 16 nA with four wakeup pins, making the device suitable for applications that spend most of their time in low-power states. Typical embedded applications include low-power sensor nodes, USB-connected control devices, industrial monitoring systems, portable instrumentation, and connected battery-powered products. The Arm Cortex-M4 platform provides a broad software ecosystem and supports efficient control workloads, while USB connectivity enables data exchange with a host device. Exact peripheral details, flash programming requirements, package dimensions, and electrical limits should be confirmed in the STMicroelectronics STM32L412xx datasheet before final schematic and PCB release. The principal design consideration is matching the device voltage range and low-power mode requirements to the battery or supply topology. Designers should confirm USB transceiver requirements, clock and reset implementation, decoupling, exposed programming access, and thermal conditions against the manufacturer documentation. For replacement decisions, verify pin compatibility, memory capacity, peripheral availability, temperature grade, and firmware support rather than relying on nominal Cortex-M4 equivalence alone. This product record combines verified distributor identity, manufacturer device information, pricing references, application guidance, and explicit uncertainty markers. It is intended to support engineering selection and sourcing while avoiding assumptions about unprovided electrical, package, or lifecycle details.

طلب عرض سعر اتصل بنا
STM32L412K8U6 - 80MHz Cortex-M4 MCU, 64KB | STMicroelectronics
STM32L412K8U6

STM32L412K8U6 - 80MHz Cortex-M4 MCU, 64KB | STMicroelectronics

STMicroelectronics STM32L412K8U6 is an ultra-low-power 32-bit microcontroller built around an Arm Cortex-M4 processor with floating-point unit, operating at up to 80 MHz, with 64 KB of Flash memory in a 32-pin UFQFPN 5 x 5 mm package. It combines USB connectivity and low-power design in a compact embedded-control package. An ultra-low-power microcontroller is a semiconductor that balances processing capability with reduced energy consumption during active operation and low-power modes. The STM32L4 product hierarchy combines an Arm Cortex-M4 core, embedded Flash, SRAM, communication peripherals, and power-management functions. This makes the STM32L412K8U6 suitable for compact systems requiring flexible processing, serial connectivity, and efficient standby behavior without the complexity of a larger application processor. The principal specifications are an 80 MHz maximum clock frequency, 64 KB of Flash memory, and a 32-pin UFQFPN package measuring 5 x 5 mm. The Arm Cortex-M4 core includes an FPU for efficient single-precision floating-point operations, while USB support expands the available peripheral options. The 64 KB Flash configuration provides a practical balance between firmware capacity and package density for embedded products, control systems, and connected accessories. Compared with larger STM32 members, the K8U6 option offers a compact 32-pin footprint while retaining the performance-oriented Cortex-M4 architecture and 80 MHz operating frequency. The product-family naming structure also provides related density options that can be evaluated when more Flash memory is required, although changing density can affect pin availability, firmware organization, and board-level requirements. Software compatibility must therefore be checked against the exact device configuration. Typical uses include USB-connected industrial controls, compact sensor interfaces, low-power data-acquisition modules, medical and laboratory instruments, and small automation nodes. In these applications, the microcontroller can handle peripheral control, communications, and real-time processing while keeping the board area constrained by the 5 x 5 mm package. PCB implementation should preserve the exposed-pad thermal and electrical requirements of the UFQFPN package. Follow the manufacturer land pattern, provide the specified decoupling network, and review pin multiplexing and peripheral assignments for the selected board revision before releasing firmware. This product page combines the verified STM32L412K8U6 specifications, same-package family options, comparison parameters, and practical implementation guidance to support component selection, schematic review, sourcing, and PCB planning.

طلب عرض سعر اتصل بنا