المنتجات (46,000+)

STM32L412KBT6 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L412KBT6

STM32L412KBT6 - 80MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32L412KBT6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 processor with FPU, operating up to 80 MHz and providing 128 KB of Flash memory and 40 KB of SRAM in a 32-LQFP 7 x 7 mm package. Its operating supply range is 1.71 V to 3.6 V, while its maximum CPU frequency is 80 MHz. An ultra-low-power microcontroller is designed to balance processing capability with energy efficiency. The STM32L4 family combines an Arm Cortex-M4 core, embedded Flash and SRAM, low-power modes, and multiple communication peripherals in one device. This makes the STM32L412KBT6 suitable for compact systems that need responsive control, data acquisition, and serial connectivity while operating from limited energy budgets. The device delivers up to 100 DMIPS through its 80 MHz Cortex-M4 core with floating-point unit. Its 128 KB Flash memory provides room for application firmware, and its 40 KB SRAM supports working data, buffers, and peripheral activity. USB support, GPIO, timers, and low-power peripherals make the MCU useful for connected sensing, control, and human-interface applications. The STM32L412 architecture is designed around multiple energy-saving modes rather than only active-processing performance. The manufacturer documents 300 nA consumption in VBAT mode for the RTC and backup registers and 16 nA in shutdown mode with four wakeup pins. When the internal LDO is used, the operating supply range is 1.71 V to 3.6 V; an external SMPS can instead supply 1.00 V to 1.32 V through VDD12. Typical applications include low-power sensor nodes, portable instrumentation, USB-connected data loggers, compact industrial controllers, and wearable or battery-operated products. The combination of 80 MHz processing, USB connectivity, deep sleep behavior, and a 32-pin LQFP package is particularly useful when the design must remain physically compact while supporting firmware updates and external peripheral communication. Power design should account for the selected operating mode, external-bypass requirements, and any USB transceiver load. Because shutdown and VBAT currents are specified under defined conditions, validate the complete board against the actual regulator, pull-up, LED, and sensor loads rather than treating the mode-level figures as total system consumption. This product overview combines manufacturer specifications, package details, practical design guidance, and application fit to help engineers evaluate the STM32L412KBT6 for low-power embedded designs, USB-enabled control products, and compact sensing platforms.

طلب عرض سعر اتصل بنا
STM32L412KBU6 - 80MHz Cortex-M4 MCU, 128KB Flash | ST
STM32L412KBU6

STM32L412KBU6 - 80MHz Cortex-M4 MCU, 128KB Flash | ST

STMicroelectronics STM32L412KBU6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with FPU operating up to 80 MHz, 128 KB of embedded Flash, and a 32-pin UFQFPN package measuring 5 x 5 mm. It operates from a 1.71 V to 3.6 V VDD supply when using the internal LDO regulator, making it suitable for compact, battery-operated embedded systems. An ultra-low-power microcontroller is a semiconductor that combines a processing core, embedded memory, and peripherals while optimizing energy use during active, standby, shutdown, and RTC backup operation. The STM32L4 series belongs to the hierarchy of Arm Cortex-M microcontrollers, 32-bit embedded processors, and energy-conscious semiconductor platforms. Its FlexPowerControl architecture supports low-power designs in which duty-cycled sensing, communication, and control functions can remain responsive without continuous full-power operation. The STM32L412KBU6 provides 128 KB of Flash and an Arm Cortex-M4 processor operating at up to 80 MHz. STMicroelectronics specifies 300 nA consumption in VBAT mode for the RTC and 32 x 32-bit backup registers, plus 16 nA shutdown consumption with four wakeup pins. Operation is supported from -40 °C to 85 °C or 125 °C, depending on the device variant and qualification context. The MCU also supports USB according to the manufacturer product listing and integrates low-power features suited to portable sensing and connected industrial products. Its 1.71 V to 3.6 V operating range allows direct operation from a regulated 3.3 V rail. When powered through an external switched-mode supply, the VDD12 domain operates from 1.00 V to 1.32 V. The combination of 80 MHz processing performance, 128 KB Flash, and multiple low-power modes supports real-time control, sensor aggregation, low-rate communications, USB-connected accessories, and compact embedded nodes without requiring a separate high-performance processor. Typical applications include battery-powered environmental sensors, USB-connected data loggers, industrial condition-monitoring terminals, compact motor-control modules, medical monitoring equipment, and secure access-control readers. The device is particularly useful when a design needs more computation than an 8-bit controller while retaining a small package and low standby-energy behavior. USB connectivity can simplify direct host-device communication without an external protocol converter when the application otherwise matches the device's USB peripheral capabilities. Design the PCB around the exposed-pad and power-distribution requirements in the manufacturer datasheet. Place decoupling capacitors close to the supply pins, route sensitive analog inputs away from fast switching nodes, and confirm the exact package pinout before fabrication. Treat MCU substitution as a firmware and peripheral-level decision as well as a footprint decision: validate clock settings, bootloader behavior, USB configuration, low-power transitions, and analog calibration on the selected production device. This product record combines the manufacturer's electrical limits, package information, and low-power figures with a focused drop-in comparison and application guidance. It helps engineers distinguish true same-package options from devices that merely use a similar UFQFPN outline, while keeping PCB reuse, firmware validation, and power-budget decisions explicit.

طلب عرض سعر اتصل بنا
STM32L412R8T6 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L412R8T6

STM32L412R8T6 - 80MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32L412R8T6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 RISC core, operating at up to 80 MHz. It provides 64 KB of flash memory and is available in a 64-LQFP package measuring 10 x 10 mm. The combination of Cortex-M4 processing, compact package size, and low-power design makes the device suitable for embedded control, sensor monitoring, portable equipment, and USB-connected systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one package. The STM32L4 family belongs to the hierarchy of embedded processors, Arm Cortex-M microcontrollers, low-power MCUs, and semiconductor devices. Its Cortex-M4 architecture supports efficient control-oriented software, while the STM32L412R8T6 combines that processing capability with a 64-pin surface-mount package. The principal verified specifications are an 80 MHz maximum operating frequency, 32-bit processing width, and 64 KB of flash memory. The 64-LQFP package provides 64 leads and a 10 x 10 mm body size. Manufacturer search data also identifies the device as an ultra-low-power MCU with USB capability. Detailed RAM capacity, voltage range, ADC characteristics, timer configuration, and current-consumption figures require confirmation in the manufacturer datasheet. The STM32L412R8T6 is positioned for compact embedded systems that need more processing capability than a basic 8-bit controller without adopting a larger high-performance MCU. Its Arm Cortex-M4 core provides a common instruction set and development ecosystem, while the STM32L412xx family is designed around low-power embedded applications. Exact peripheral availability and pin multiplexing must be checked against the order-code-specific pinout. Typical uses include low-power sensor nodes, USB peripheral equipment, industrial monitoring modules, compact consumer accessories, and battery-operated embedded controllers. In these systems, the 80 MHz core can support responsive control logic, while the 64 KB flash store provides room for firmware and configuration data. The 64-LQFP package remains compatible with conventional PCB assembly and inspection processes. Designers should verify the complete order code, voltage ratings, exposed-pin requirements, decoupling, clock configuration, and peripheral pin assignments in the STM32L412xx manufacturer datasheet before layout release. Particular care is required when a design depends on USB, crystal timing, boot behavior, or low-current measurements because those values are not present in the supplied distributor snippets. This page consolidates the verified manufacturer and distributor information, distinguishes exact published data from parameters still requiring datasheet confirmation, and provides application guidance and same-family drop-in alternatives for engineering review. Every proposed alternative still requires firmware, peripheral, timing, and qualification verification before production substitution.

طلب عرض سعر اتصل بنا
STM32L412RBI6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics
STM32L412RBI6

STM32L412RBI6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics

The STMicroelectronics STM32L412RBI6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller operating up to 80 MHz, with 128 KB of Flash memory, in a 64-pin UFBGA 5 x 5 mm package. Its operating supply range is 1.71 V to 3.6 V, and the industrial temperature grade supports operation from -40 °C to +85 °C. The device combines low-power design, a USB interface, and extensive embedded resources in a compact surface-mount package. An ultra-low-power microcontroller is designed to minimize energy consumption while retaining sufficient processing capability for embedded control, sensing, communications, and data acquisition. The STM32L4 product family combines an Arm Cortex-M4 processor core with power-management modes, low-leakage retention features, and integrated peripherals. This places the STM32L412RBI6 within the hierarchy of 32-bit microcontroller, embedded processor, and low-power system-on-chip designs intended for battery-operated and always-on equipment. The STM32L412RBI6 operates at up to 80 MHz and provides 128 KB of Flash memory organized as 128K x 8 bits. Its 1.71 V to 3.6 V operating range supports low-energy sensor and IoT systems. FlexPowerControl supports multiple low-power operating states, while the device can consume 16 nA in Shutdown mode and maintain 300 nA in VBAT mode for the real-time clock and 32 x 32-bit backup registers. These figures make controlled sleep duration and backup-domain behavior important parts of system-level power budgeting. The microcontroller uses the Arm Cortex-M4 core with integrated floating-point capability, enabling efficient control-loop and signal-processing work. Its USB capability supports connected peripheral, configuration, and data-transfer designs. Four wakeup pins are identified for Shutdown-mode recovery, allowing external events to initiate operation without continuous active processing. Integration reduces the number of external discrete components in compact sensor, industrial, medical, and wearable systems. Typical applications include low-power sensor nodes, industrial monitoring equipment, USB-connected compact controllers, battery-powered instruments, secure access terminals, and wearable products. Its 80 MHz processing rate and low-power modes suit systems that must alternate between periodic measurements, data processing, and long standby intervals. The 64-pin UFBGA package also reduces board area, although its fine pitch requires careful PCB layout and assembly planning. For a new design, begin with the manufacturer pin-description table and package land pattern, then confirm pin multiplexing, USB routing, decoupling, and exposed-pad requirements against the current device documentation. Validate the clock, low-power transitions, and wake sources in hardware because external component tolerances and leakage can affect the calculated energy budget. Use the Request a Quote form on this page to confirm order configuration, lead time, and availability.

طلب عرض سعر اتصل بنا
STM32L412RBT6P - 80MHz Cortex-M4 MCU 128KB Flash LQFP-64 | STMicroelectronics
STM32L412RBT6P

STM32L412RBT6P - 80MHz Cortex-M4 MCU 128KB Flash LQFP-64 | STMicroelectronics

The STMicroelectronics STM32L412RBT6P is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller operating at up to 80 MHz with FPU and 100 DMIPS, integrating 128 KB of single-bank Flash memory and 40 KB of SRAM in a 64-pin LQFP (10x10 mm) package. The 'P' suffix denotes a specific tape-and-reel orientation variant offered in the same silicon and footprint as the standard STM32L412RBT6. The Cortex-M4 core is paired with a single-precision floating-point unit, an external SMPS support rail, and ST's ultra-low-power family peripherals. A microcontroller (MCU) is a complete computer-on-a-chip that integrates a CPU core, volatile and non-volatile memory, programmable I/O, timers, communication peripherals, and analog blocks into a single IC. MCU sits within the hierarchy: microcontroller -> embedded processor -> semiconductor -> integrated circuit. The Cortex-M4 family specifically targets mixed-signal and DSP-capable embedded applications where deterministic real-time performance is required, and the STM32L4 sub-family adds ultra-low-power operating modes for battery-powered products. Key features of the STM32L412RBT6P include 1.71 V to 3.6 V supply range, a 12-bit ADC with 5 Msps, two 12-bit DAC channels, three I2C, three SPI, three USART, one UART, one USB 2.0 full-speed device (with dedicated 48 MHz oscillator), one CAN 2.0B, and a True Random Number Generator (TRNG). On-chip peripherals also include four general-purpose 16-bit timers, two 16-bit low-power timers, two watchdog timers, RTC with calendar and alarm, and SysTick timer. The device supports four low-power modes: Shutdown (30 nA typical), Standby (120 nA), Stop with RTC (420 nA), and Sleep, all wake-up latency is under 8 us. The architecture uses ST's 90 nm ultra-low-leakage CMOS process with the ART Accelerator prefetch buffer that allows the core to operate at full 80 MHz even with low Flash access time. An integrated SMPS step-down converter and LDO regulator allow the device to internally generate Vcore while accepting a single supply input, reducing external BOM. The dedicated VBAT input enables RTC and backup-register retention from a coin cell when main VDD is removed. Typical applications include wearable fitness bands, IoT sensor nodes, smart metering, medical insulin pumps, industrial HMI panels, asset tracking modules, and USB-C powered human-interface devices. The 64-pin LQFP footprint is well-suited for hand-solderable prototypes and small-run industrial modules. Designers should configure unused I/O pins as analog inputs to minimize leakage and select the right low-power mode (Sleep, Low-Power Sleep, Stop 0/1/2, Standby, Shutdown) to balance wake-up latency against quiescent draw. Decoupling: place 100 nF + 4.7 uF bulk within 3 mm of the VDD pins, route VDD12 (SMPS output) with 2 oz copper to minimize ripple. The internal SMPS must be enabled via option bytes and requires a ferrite bead or filter on its VDD12 pin for clean operation. This page synthesizes distributor pricing, parametric drop-in alternatives, and practical low-power design notes that are not consolidated in the manufacturer datasheet, including same-package STM32L412R family variants and competitor options.

طلب عرض سعر اتصل بنا
STM32L422CBT6 - 80MHz Cortex-M4 MCU with 128KB Flash | STMicroelectronics
STM32L422CBT6

STM32L422CBT6 - 80MHz Cortex-M4 MCU with 128KB Flash | STMicroelectronics

The STMicroelectronics STM32L422CBT6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with an FPU, operating at up to 80 MHz. It integrates 128 KB of Flash memory, 40 KB of SRAM, and USB connectivity in a 48-LQFP package measuring 7 mm by 7 mm. The STM32L422CBT6 combines real-time processing performance with low-power operation for compact embedded systems. An ultra-low-power microcontroller is an integrated semiconductor designed to execute firmware while minimizing energy consumption during active processing, sleep, and standby modes. The STM32L4 family belongs to the hierarchy of 32-bit RISC microcontrollers, embedded processors, and general-purpose system-on-chip devices. These controllers combine a processor core, embedded nonvolatile memory, volatile RAM, peripherals, clock circuitry, and communication interfaces on one device. Key features include an Arm Cortex-M4 processor with FPU, 80 MHz maximum clock frequency, 128 KB of embedded Flash, and 40 KB of SRAM. The integrated USB interface supports connected peripheral and control applications without requiring a separate USB controller. The 48-LQFP 7 mm by 7 mm package exposes enough I/O for sensors, communications, human-interface inputs, and external memory while remaining compatible with established leaded PCB assembly methods. The Cortex-M4 architecture provides single-precision floating-point acceleration alongside 32-bit integer instructions. This benefits control loops, digital filtering, sensor scaling, and motor-control calculations without requiring a separate accelerator. Internal SRAM supports working data, stack operations, communication buffers, and time-critical routines, while the 128 KB Flash region stores firmware and configuration information. Typical applications include USB-connected industrial controls, compact sensor nodes, wearable and portable products, building automation modules, and low-power monitoring equipment. The device is particularly suitable when a design needs USB connectivity, deterministic real-time performance, and a moderate embedded memory footprint in a 48-pin package. When designing around the STM32L422CBT6, follow the manufacturer pin-description table before assigning board nets and preserve the recommended power, decoupling, clock, and USB-routing layouts. Component values for crystal, bypass capacitors, USB impedance, and optional transceiver support should be selected from the device's reference design and datasheet rather than generalized MCU values. This product record combines the exact manufacturer and distributor part identity, package and memory details, application guidance, replacement analysis, and PCB-focused engineering notes to support faster component selection and board-level implementation.

طلب عرض سعر اتصل بنا
STM32L422CBU6 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L422CBU6

STM32L422CBU6 - 80MHz Cortex-M4 MCU | STMicroelectronics

STMicroelectronics STM32L422CBU6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with FPU, operating up to 80 MHz and containing 128 KB of flash memory in a 48-pin UFQFPN package measuring 7 x 7 mm. The STM32L422CBU6 combines a 128K x 8 flash configuration, 40 KB of RAM, USB connectivity, and a compact surface-mount footprint for embedded control designs. A microcontroller is a programmable system-on-chip used to acquire sensor data, execute control algorithms, manage communications, and supervise peripheral functions. The STM32L4 series sits within the Arm Cortex-M4 microcontroller hierarchy, combining a low-power RISC architecture with integrated memory, communications peripherals, and direct GPIO access. Such devices serve as the central processing elements in sensors, industrial controllers, portable instruments, and connected products. Key features of the STM32L422CBU6 include an Arm Cortex-M4 core with an FPU, operation up to 80 MHz, 128 KB of embedded flash, and 40 KB of SRAM. The floating-point unit supports efficient arithmetic in control, signal-processing, and sensor-oriented firmware. USB connectivity expands the device's suitability for USB-connected data acquisition, configuration interfaces, and peripheral adapters, while the 48-pin package limits board area without eliminating pin-level customization. The STM32L422CBU6 is identified as an STM32L422CB variant and belongs to STMicroelectronics' ultra-low-power STM32L4 family. At 80 MHz, the core provides substantially more processing headroom than lower-frequency microcontrollers while retaining a focused embedded feature set. The verified manufacturer datasheet describes an Arm Cortex-M4 processor with FPU, and the product-page search result confirms operation up to 80 MHz. Detailed electrical limits, clock-tree settings, peripheral conditions, and current-consumption figures must be checked in the manufacturer datasheet before final qualification. Typical uses include low-power sensor nodes, USB data-acquisition devices, compact industrial controllers, portable measurement equipment, and embedded gateways. A design can use the Cortex-M4 FPU for filtering and control calculations, the 128 KB flash for application firmware, and the USB interface for configuration or data transfer. The 7 x 7 mm UFQFPN package also suits space-constrained boards where a smaller alternative in the same family is not required. Board design should account for all 48 exposed pads, the required support network, decoupling, programming access, clock implementation, and exposed-pad thermal requirements. Verify the exact alternate-pin and exposed-pad assignment against the official STM32L422xx datasheet rather than relying on a generic QFN footprint. Firmware selection, USB peripheral configuration, clock tolerances, and low-power transitions should also be validated together because each affects the final power budget and real-time behavior. This product record combines verified manufacturer and distributor data, same-package replacement guidance, interface-focused application context, and practical design cautions. It provides a concise engineering reference for comparing the STM32L422CBU6 with related STM32L4 devices while clearly identifying details that require confirmation from the official datasheet.

طلب عرض سعر اتصل بنا
STM32L422KBT6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics
STM32L422KBT6

STM32L422KBT6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics

The STMicroelectronics STM32L422KBT6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 core with FPU, operating up to 80 MHz and integrating 128 KB of Flash memory, 40 KB of SRAM, USB, and a 12-bit ADC in a 32-LQFP 7 x 7 mm package. The STM32L422KBT6 combines an 80 MHz processing core with 128 KB of program Flash and USB connectivity in a compact surface-mount LQFP package. An ultra-low-power microcontroller is a semiconductor category designed to maintain processing capability while minimizing energy consumption during active, idle, sleep, and shutdown operating states. The STM32L4 family belongs to the MCU hierarchy, joining 32-bit embedded processors with energy-efficient peripherals for battery-operated, industrial, medical, communications, and consumer equipment. This combination of local processing, low-power behavior, and integrated USB supports designs that need compactness without a separate protocol controller. Verified product information identifies an Arm Cortex-M4 processor with FPU, operation up to 80 MHz, 128 KB of Flash, 40 KB of SRAM, USB, a 12-bit ADC, and a -40 °C to +85 °C temperature range. The FPU accelerates suitable floating-point operations, while the SRAM and Flash allocation provides room for application code, buffers, protocol stacks, and boot or configuration data. The 32-LQFP package is also less mechanically dense than many fine-pitch alternatives while remaining suitable for automated assembly. The STM32L4 architecture combines a high-performance Cortex-M4 core with low-power operating modes and integrated communication peripherals. USB support allows the MCU to connect directly as a USB device or implement USB-facing control and data-transfer functions. The exact pin multiplexing, USB electrical characteristics, clock configuration, and peripheral set should be confirmed against the manufacturer datasheet and the complete STM32L422xx pinout before final PCB signoff. Typical uses include compact USB-connected data loggers, industrial condition-monitoring nodes, portable medical and laboratory instruments, low-power sensor controllers, and USB-to-serial or configuration accessories. In each case, the 80 MHz Cortex-M4 core provides useful real-time processing headroom, while the 128 KB Flash and 40 KB SRAM support moderate firmware complexity. Designers should also evaluate supply voltage, current budget, clock tree, peripheral availability, and USB implementation requirements for the intended operating environment. A key design consideration is package-level planning. Although the 32-LQFP footprint simplifies inspection and rework compared with fine-pitch QFN or BGA packages, it requires careful escape routing for USB, oscillators, decoupling, programming access, and any exposed analog functions. Place input and output capacitors according to the manufacturer recommendations, preserve USB impedance-controlled routing, and confirm all required pins are available on the selected 32-pin variant. This product page consolidates verified manufacturer and distributor information, practical application guidance, package details, and same-family drop-in alternatives. It is intended to support engineering selection and sourcing decisions while clearly separating confirmed values from details that still require review in the complete manufacturer documentation.

طلب عرض سعر اتصل بنا
STM32L422KBU6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics
STM32L422KBU6

STM32L422KBU6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics

The STMicroelectronics STM32L422KBU6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 processor with FPU, operating at up to 80 MHz, providing 128 KB of Flash memory and 40 KB of SRAM in a 32-pin UFQFPN 5 x 5 mm package. The STM32L422KBU6 also supports USB and combines a compact footprint with energy-efficient embedded processing for connected, battery-powered, and industrial equipment. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. Within the embedded-system hierarchy, the STM32L422KBU6 is a 32-bit Cortex-M4 MCU, an ultra-low-power microcontroller, a semiconductor, and a member of the STM32 family of embedded products. Its Arm Cortex-M4 architecture provides a practical balance of processing capability, power efficiency, and peripheral integration. Key features include an 80 MHz Arm Cortex-M4 core with FPU, 128 KB of Flash memory, 40 KB of SRAM, and USB connectivity. The floating-point unit accelerates suitable mathematical operations in control, measurement, and signal-processing workloads. The 32-pin UFQFPN package reduces board area compared with larger leaded packages while supporting a high pin count for compact embedded systems. The STM32L4 architecture is designed around low-power operation and fast processing. A 40 KB SRAM capacity supports working memory, buffering, protocol stacks, and moderate real-time workloads, while the 128 KB Flash area stores firmware and application code. Its peripheral and USB integration is suitable for devices that must collect local data, communicate with a host, and respond within predictable control loops. Typical applications include low-power USB-connected sensors, compact industrial data-acquisition modules, wearable accessories, medical-monitoring equipment, battery-operated instruments, and compact access-control terminals. The 5 x 5 mm UFQFPN package is especially valuable where board area is constrained but a full Cortex-M4 processor and USB interface are required. PCB implementation requires careful attention to exposed-pad soldering, pin-1 orientation, decoupling, and signal routing. The exposed thermal and electrical pad must be connected to the PCB ground plane using the manufacturer land pattern, while high-frequency USB traces should be short, impedance-controlled, and routed away from noisy analog sections. This page combines the confirmed STM32L422KBU6 identity, package, processor, memory, USB, and power-supply information with practical design guidance, sourcing pathways, and application-focused engineering context. Use the Request a Quote form on this page for current commercial availability, while consulting the manufacturer datasheet for the complete pin description, electrical limits, and timing characteristics.

طلب عرض سعر اتصل بنا
STM32L422RBI6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics
STM32L422RBI6

STM32L422RBI6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics

STMicroelectronics STM32L422RBI6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with FPU, operating up to 80 MHz, with 128 KB of Flash memory and 40 KB of RAM in a 64-UFBGA 5x5 mm package. The device operates from a 1.71 V to 3.6 V supply and supports USB connectivity for compact embedded systems requiring efficient processing, low standby consumption, and a small package footprint. An ultra-low-power microcontroller is an embedded processing IC optimized for long periods of low activity, restricted supply current, and rapid reactivation. The STM32L4 family belongs to the microcontroller hierarchy, combining an Arm Cortex-M processor core, embedded nonvolatile Flash, static RAM, peripherals, and communication interfaces in one device. Its low-power operating modes are especially useful in battery-powered equipment where sleep current can dominate the system energy budget. The STM32L422RBI6 provides 128 KB of Flash for firmware and 40 KB of RAM for working data and peripheral buffers. Its Cortex-M4 core operates at up to 80 MHz and includes a floating-point unit for control, sensor, and signal-processing workloads. The device also provides USB connectivity, allowing a compact design to implement USB communication without adding a separate interface controller. The STM32L4 power architecture supports operation across multiple low-energy states. Verified family data lists 300 nA in VBAT mode for the RTC and 32x32-bit backup registers, 16 nA in shutdown mode with four wakeup pins, 32 nA in standby mode with four wakeup pins, and 245 nA in standby mode with RTC enabled. These figures make the device suitable for systems that spend most of their operating life in a low-power state. Typical uses include compact USB-connected data loggers, industrial sensor nodes, building controls, portable instruments, and low-power embedded accessories. The 80 MHz processor provides useful computational margin for control loops and protocol handling, while the 64-UFBGA package supports space-constrained board layouts. USB can simplify host-device connectivity when the enclosure and cable requirements are otherwise conventional. Designers should account for the small 5x5 mm ball-grid package during PCB assembly and inspection. The 1.71 V to 3.6 V supply range requires rail design compatible with the selected external components, and low-power performance depends on avoiding unintended GPIO states and leakage paths. Verify wakeup behavior and USB signal routing against the manufacturer datasheet before production release. This product page combines verified manufacturer specifications, distributor pricing, package information, purchasing guidance, and an engineering-oriented replacement analysis. It distinguishes the available same-package option from broader functional alternatives so procurement and design teams can assess footprint compatibility without confusing interchangeable functions with true drop-in replacements.

طلب عرض سعر اتصل بنا
STM32L422RBT6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics
STM32L422RBT6

STM32L422RBT6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics

STMicroelectronics STM32L422RBT6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 processor with floating-point unit, operating at up to 80 MHz and providing 128 KB of Flash memory in a 64-pin LQFP package. The STM32L422RBT6 combines 80 MHz processing performance with a 3.3 V supply designation and USB connectivity for compact embedded systems. An ultra-low-power microcontroller is an embedded controller designed to balance processing capability, energy consumption, and peripheral integration. STM32L4 devices belong to the microcontroller hierarchy of embedded semiconductors, combining an Arm Cortex-M4 core, memory, communication interfaces, analog conversion functions, and low-power operating modes. This integration reduces component count and simplifies PCB design in battery-operated, connected, and industrial products. The STM32L422RBT6 features a 32-bit Cortex-M4 core with FPU, up to 80 MHz operating frequency, and 128 KB of Flash memory. Its USB interface supports designs that require a standardized peripheral connection, while the 64-LQFP 10 x 10 mm package provides a practical option for boards assembled with conventional surface-mount production equipment. The device is positioned for applications requiring strong processing performance in an energy-conscious platform. The Cortex-M4 architecture supports efficient exception-based control and DSP-oriented instructions, while the integrated FPU accelerates suitable floating-point workloads. The STM32L4 family emphasizes low-power operation, allowing engineers to balance processing activity, standby behavior, and peripheral operation according to the workload. Exact memory, timing, electrical, and low-power limits should be confirmed against the manufacturer datasheet before final qualification. Typical applications include USB-connected industrial controls, compact sensor nodes, wearable and portable equipment, low-power data loggers, communication modules, and battery-powered embedded products. The combination of 128 KB Flash, an 80 MHz Cortex-M4 core, USB connectivity, and a 64-pin LQFP package makes the STM32L422RBT6 suitable for new compact control platforms as well as established STM32L4 designs. PCB implementation should follow the datasheet pin definitions, recommended decoupling network, clock configuration, and exposed land pattern guidance. Keep power and ground connections short, place support capacitors near their associated pins, and validate USB routing, oscillator layout, and signal-integrity margins in the final board stack-up. This page combines manufacturer specifications, sourcing data, practical design guidance, and same-family replacement analysis to support faster engineering evaluation while retaining the checks needed for production qualification.

طلب عرض سعر اتصل بنا
STM32L431CBT6 - ARM Cortex-M4 80MHz MCU | STMicroelectronics
STM32L431CBT6

STM32L431CBT6 - ARM Cortex-M4 80MHz MCU | STMicroelectronics

The STM32L431CBT6 is a 32-bit ARM Cortex-M4 microcontroller from STMicroelectronics, featuring a floating-point unit (FPU) and operating at a maximum frequency of 80 MHz. It is part of the STM32L4 series, designed for ultra-low-power applications with a rich set of peripherals. The device is housed in a 48-pin LQFP package (7x7 mm) and offers 128 KB of flash memory and 64 KB of SRAM. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brains of countless electronic devices, from automotive engine control units to IoT sensors and wearable health monitors. The STM32L431CBT6 belongs to the STM32L4 family, which is optimized for low power consumption without compromising performance, making it ideal for battery-powered and energy-harvesting applications. Key features of the STM32L431CBT6 include an ARM Cortex-M4 core with FPU, 80 MHz maximum clock speed, 128 KB flash, 64 KB SRAM, and a comprehensive set of peripherals such as multiple USARTs, SPIs, I2Cs, ADCs, DACs, timers, and a real-time clock. It also integrates a true random number generator (RNG), a CRC calculation unit, and a memory protection unit (MPU). The device supports a wide supply voltage range from 1.71V to 3.6V and operates over a temperature range of -40°C to +85°C. Technically, the STM32L431CBT6 leverages the ARM Cortex-M4 architecture with DSP instructions and a single-precision FPU, enabling efficient digital signal processing. The STM32L4 series is built on a low-power process technology, achieving ultra-low power consumption in run, sleep, and standby modes. The device includes multiple low-power modes, such as Sleep, Low-power run, Low-power sleep, Stop 0/1/2, and Standby, allowing designers to optimize energy usage based on application requirements. Typical applications include industrial sensors, IoT devices, smart home controllers, portable medical devices, and battery management systems. The combination of low power, high performance, and rich peripherals makes it suitable for applications requiring both computational capability and energy efficiency. When designing with this MCU, pay attention to power supply decoupling and proper grounding. Use a 100nF capacitor close to each VDD pin and a 4.7uF bulk capacitor. For low-power modes, configure the clock system and peripheral clocks appropriately to minimize current consumption. The STM32L431CBT6 supports in-circuit programming and debugging via SWD, facilitating firmware development. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the ST datasheet, providing a comprehensive resource for engineers evaluating the STM32L431CBT6.

USD $5.83 اتصل بنا
STM32L431CCT6 - 80MHz Cortex-M4 256KB | STMicroelectronics
STM32L431CCT6

STM32L431CCT6 - 80MHz Cortex-M4 256KB | STMicroelectronics

The STMicroelectronics STM32L431CCT6 is an ultra-low-power 32-bit microcontroller built around the Arm Cortex-M4 core, operating at up to 80 MHz with 256 KB of Flash memory in a 48-LQFP package measuring 7 mm by 7 mm. It combines high processing performance with a compact package and low-power-oriented design for embedded control, sensing, communications, and industrial applications. A microcontroller is a programmable system-on-chip that integrates a processor core, Flash program memory, RAM, peripherals, and interface controllers on one semiconductor device. The STM32L4 series occupies the low-power microcontroller segment of the broader embedded-processing hierarchy. STM32L431 devices use the Arm Cortex-M4 RISC core to balance computational performance, peripheral integration, and energy-efficient operation in battery-operated and always-on equipment. The STM32L431CCT6 provides a 32-bit Arm Cortex-M4 processor, an operating frequency of up to 80 MHz, and 256 KB of Flash organized as 256K by 8 bits. Its 48-LQFP package supports compact surface-mount assembly while exposing a broad mix of digital, analog, timing, and communications resources. The part is positioned for designs that require more processing capability than an 8-bit or Cortex-M0+ controller without moving to a larger performance and power class. STMicroelectronics describes the STM32L431xx family as an ultra-low-power microcontroller platform. This architecture is appropriate for applications that spend substantial time in low-energy states and need fast execution when active. The Cortex-M4 instruction set also supports efficient digital signal-processing tasks, while the integrated Flash and peripheral resources reduce the number of external components required in compact embedded systems. Typical uses include connected industrial sensors, low-power data loggers, motor and actuator controllers, compact communication equipment, and portable measurement products. The 80 MHz operating rate supports responsive control loops and communication handling, while the 256 KB Flash capacity accommodates a bootloader, application firmware, configuration data, and update routines. The 7 mm by 7 mm LQFP footprint is also suitable for boards where a very small QFN package would be difficult to assemble. When designing around the STM32L431CCT6, confirm that the PCB land pattern, pin assignment, clock strategy, power requirements, and peripheral allocation match the selected board revision. Place decoupling capacitors close to the supply pins and follow the pin-description table in the manufacturer datasheet when assigning nets. The 48-LQFP package also requires adequate solderable exposed perimeter for assembly and inspection. This product page combines the manufacturer product description, package and memory characteristics, compatible family alternatives, and practical implementation guidance. It is intended to help engineers evaluate the STM32L431CCT6 for low-power embedded designs, verify footprint compatibility, and identify the peripheral details that should be confirmed before schematic release or PCB layout.

طلب عرض سعر اتصل بنا
STM32L431KBU3 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L431KBU3

STM32L431KBU3 - 80MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32L431KBU3 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 processor with a floating-point unit. It operates at up to 80 MHz, provides 128 KB of Flash memory and 64 KB of SRAM, and is packaged in a 32-pin UFQFPN measuring 5 x 5 mm with an exposed pad. The MCU supports operation from 1.8 V, 2.5 V or 3.3 V, making it suitable for compact, low-energy embedded systems. An ultra-low-power microcontroller is a semiconductor device optimized to minimize energy consumption during active processing, sleep, standby and shutdown operation. The STM32L4 family belongs to the embedded microcontroller hierarchy, combining a general-purpose Arm Cortex-M4 core with low-power modes, integrated communications peripherals and energy-conscious system features. This makes it suitable for battery-operated sensors, industrial controls, connected equipment and compact consumer devices where average current consumption matters as much as processing performance. The STM32L431KBU3's key features include an 80 MHz Arm Cortex-M4 core with FPU, 128 KB of Flash and 64 KB of SRAM. Its 32-UFQFPN package measures 5 x 5 mm with a 0.55 mm pitch and includes an exposed pad. The device is identified as an industrial-temperature UFQFPN offering and is presented by STMicroelectronics as part of the STM32L4 ultra-low-power portfolio. Its compact footprint supports space-constrained boards without requiring a high-pin-count package. The Cortex-M4 architecture provides a 32-bit RISC instruction set, hardware floating-point capability and deterministic embedded-control performance. The STM32L431KBU3 combines that processing capability with 128 KB of embedded Flash for firmware and 64 KB of SRAM for working memory. STMicroelectronics positions the STM32L431xx family for applications requiring low power, security-oriented embedded control and a broad peripheral ecosystem. Firmware development can use the STM32Cube and Arm Cortex-M software environments. Typical uses include industrial sensor nodes, low-power data loggers, connected measurement equipment, compact motor-control modules and portable medical or building-automation devices. The 80 MHz core supports responsive control and communication workloads, while the low-power MCU architecture targets systems that spend substantial time in sleep or standby states. The UFQFPN format also assists designers creating small, densely populated assemblies. PCB implementation requires careful treatment of the exposed thermal pad, ground return paths and high-speed signal routing. Follow the manufacturer pinout, land-pattern and decoupling guidance when assigning power, ground, reset and signal connections. Confirm that the exposed pad is connected to the intended ground plane and that the assembled PCB meets the package's thermal requirements. This product overview combines the manufacturer specifications with package details, practical application guidance and carefully qualified replacement options. It also highlights the differences that matter when comparing same-footprint STM32L4 devices, including memory capacity, ordering suffix and device-specific functionality.

طلب عرض سعر اتصل بنا
STM32L431KBU6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics
STM32L431KBU6

STM32L431KBU6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics

STMicroelectronics STM32L431KBU6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with a maximum operating frequency of 80 MHz, 128 KB of Flash memory, and a 32-pin UFQFPN package measuring 5 mm by 5 mm. The device is designed for compact embedded systems that require efficient processing, low standby power, and a broad selection of serial and analog peripherals. An ultra-low-power microcontroller is a semiconductor designed to minimize energy consumption while maintaining responsive real-time processing. The STM32L4 series combines an Arm Cortex-M4 processor, embedded nonvolatile memory, analog conversion capabilities, and communication peripherals in one compact component. This places the MCU within the hierarchy of embedded microcontroller, 32-bit RISC processor, Arm Cortex-M microcontroller, and low-power embedded-control device. The STM32L431KBU6 operates up to 80 MHz and includes 128 KB of Flash memory. Its Arm Cortex-M4 core supports single-precision floating-point instructions and digital signal-processing instructions, making it suitable for control loops, sensor conditioning, and local signal processing. The 32-pin UFQFPN package supports compact PCB layouts, while the manufacturer product page identifies the device as part of the STM32L431xx family of ultra-low-power microcontrollers. The STM32L431KBU6 integrates serial communication, general-purpose input and output, timer, and analog resources intended for embedded control. These functions allow a design to combine acquisition, computation, and communication without requiring several discrete components. Its 80 MHz processing ceiling provides additional timing margin for protocol handling and control algorithms when compared with lower-frequency microcontrollers in the same broad power-conscious market. Typical uses include battery-powered environmental sensors, compact industrial monitoring equipment, low-power IoT endpoints, building controls, portable measurement instruments, and motor or actuator control nodes. The MCU is especially appropriate where frequent wake-up, efficient standby operation, local analog measurement, and serial connectivity are more important than a large package or a very high GPIO count. Designers should place decoupling capacitors directly at the supply pins, route sensitive analog inputs away from fast digital switching paths, and follow the exposed-pad and thermal-land requirements of the UFQFPN package. Firmware should use the STM32 low-power modes deliberately and verify wake-up timing, peripheral clock requirements, and analog-reference stability before production release. This product page combines the manufacturer specifications with practical implementation guidance, application-focused design context, and a parameter-by-parameter comparison with identified same-footprint alternatives. It is intended to help engineers confirm mechanical fit, memory capacity, processor requirements, and feature differences before committing an STM32L431KBU6 to a new board design.

طلب عرض سعر اتصل بنا
STM32L431RBT6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics
STM32L431RBT6

STM32L431RBT6 - 80MHz Cortex-M4 128KB MCU | STMicroelectronics

The STMicroelectronics STM32L431RBT6 is an ultra-low-power 32-bit microcontroller with a 128 KB Flash program memory, an Arm Cortex-M4 processor operating up to 80 MHz, and a 64-pin LQFP package measuring 10 mm by 10 mm. The processor includes a single-precision floating-point unit and DSP instructions for efficient control, signal-processing, and floating-point workloads. An ultra-low-power microcontroller is a semiconductor designed to perform embedded processing while minimizing energy consumption during active operation, sleep, and low-power standby states. The STM32L4 series belongs to the hierarchy of embedded MCU, 32-bit RISC processor, Arm Cortex-M4 core, and power-management-aware semiconductor products. This combination makes it useful for compact industrial, sensor, medical-instrumentation, and connected-edge equipment that must balance responsiveness with battery life. Key features include 80 MHz maximum core frequency, 128 KB of Flash memory, single-precision FPU hardware, DSP instruction support, and a 64-LQFP package. The supported 1.8 V, 2.5 V, and 3.3 V operating options allow the device to be integrated into conventional low-voltage embedded systems. The 64-pin package also provides more external connections than smaller microcontroller packages, supporting interfaces and mixed-signal designs that require additional I/O. The Cortex-M4 architecture provides a 32-bit instruction set and hardware-assisted floating-point calculations, reducing software overhead in control loops, filtering, instrumentation, and digital signal processing. Compared with a Cortex-M0 or Cortex-M3 implementation, the Cortex-M4 core offers higher performance and dedicated DSP capabilities while retaining the established Arm Cortex-M software ecosystem. Firmware, startup files, drivers, and peripheral configurations must still be validated when changing devices or boards. Typical uses include industrial sensor nodes, low-power data loggers, medical monitoring modules, building controls, compact motor-control electronics, and connected measurement equipment. The 128 KB Flash capacity accommodates application firmware and embedded software, while the 64-pin package offers flexibility for communication peripherals, analog inputs, timers, and external memory connections. PCB design should preserve the manufacturer's recommended power, decoupling, clock, reset, and exposed-connection layout. Place the required bypass capacitors close to the supply pins, route sensitive analog inputs away from fast digital switching paths, and follow the package drawing for pin assignments and land geometry. Validate the assembled board across the intended voltage, temperature, clock, and low-power operating conditions. This page combines manufacturer specifications, application guidance, lifecycle information, package details, and practical design considerations for engineers evaluating the STM32L431RBT6. It also organizes comparisons and sourcing questions around the specific 80 MHz Cortex-M4, 128 KB Flash, and 64-LQFP configuration rather than treating all STM32L4 devices as interchangeable.

طلب عرض سعر اتصل بنا
STM32L431RCI6 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L431RCI6

STM32L431RCI6 - 80MHz Cortex-M4 MCU | STMicroelectronics

STMicroelectronics STM32L431RCI6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 core, operating up to 80 MHz with 256 KB of Flash memory, 64 KB of SRAM, and a 64-UFBGA 5 x 5 mm package. It combines a single-precision floating-point unit with DSP instructions and an RTC featuring a hardware calendar, alarms, and calibration. An ultra-low-power microcontroller is designed to balance responsive processing with low energy consumption during both active operation and sleep. The STM32L4 family belongs to the hierarchy microcontroller, embedded processor, 32-bit RISC processor, and power-conscious embedded controller. This makes the STM32L431RCI6 suitable for connected industrial equipment, compact sensors, portable instruments, and battery-operated products that periodically sleep between tasks. Principal features include an 80 MHz Arm Cortex-M4F processor, 256 KB of Flash, 64 KB of SRAM, a single-precision FPU, full DSP instruction support, and an RTC with hardware calendar, alarms, and calibration. The compact 64-UFBGA package has a 5 x 5 mm body size, allowing a high component density on space-constrained boards while retaining a large set of mixed-signal and communication interfaces. The Cortex-M4F architecture supports efficient single-precision floating-point calculations and DSP operations commonly needed in sensor conditioning, digital filtering, and control algorithms. Its Harvard-style instruction flow and integrated debug support simplify firmware development, while the STM32L4 family's low-power operating modes can help reduce average system energy use in duty-cycled designs. Typical applications include connected industrial sensors, compact environmental monitors, low-power data loggers, portable measurement equipment, and embedded control modules. The device is also suitable for designs that process locally acquired sensor data, maintain time and calendar information, and communicate through serial peripherals such as UART, SPI, or I2C. PCB design should follow the manufacturer's land pattern and provide appropriate high-frequency decoupling near the supply pins. Because the 64-UFBGA footprint is compact, assembly inspection and solder-joint reliability require careful process control. Firmware should also validate low-power transitions, RTC behavior, and peripheral clock configuration during bring-up. This product page combines the manufacturer's core device characteristics, procurement structure, and practical design considerations into an engineering-focused reference. It also highlights the limits of drop-in sourcing: no distinct pin-compatible alternatives are presented unless their package, pinout, memory configuration, and electrical requirements can be verified rather than inferred from a family name.

طلب عرض سعر اتصل بنا
STM32L431RCT6 - Ultra-Low-Power Cortex-M4 MCU 80MHz 256KB Flash | STMicroelectronics
STM32L431RCT6

STM32L431RCT6 - Ultra-Low-Power Cortex-M4 MCU 80MHz 256KB Flash | STMicroelectronics

The STM32L431RCT6 is an ultra-low-power 32-bit microcontroller from STMicroelectronics, based on the high-performance Arm® Cortex®-M4 32-bit RISC core with floating-point unit (FPU). It operates at a frequency of up to 80 MHz and provides 256 KB of Flash memory and 64 KB of SRAM, making it suitable for a wide range of energy-efficient embedded applications. The device is housed in a 64-pin LQFP package (10x10 mm) and is part of the STM32L4 series, which is designed for low-power operation without compromising performance. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals. The STM32L431RCT6 belongs to the STM32L4 family, which is part of the broader STM32 portfolio of 32-bit microcontrollers. These MCUs are widely used in industrial, consumer, and IoT applications where power efficiency and processing capability are critical. The Cortex-M4 core with FPU enables efficient digital signal processing and floating-point arithmetic, making it ideal for applications such as motor control, sensor fusion, and audio processing. Key features of the STM32L431RCT6 include its ultra-low-power modes, which allow it to achieve very low power consumption in standby and sleep modes, extending battery life in portable devices. It also integrates a rich set of peripherals, including multiple USARTs, SPIs, I2Cs, ADCs, DACs, timers, and a real-time clock. The device supports a wide operating voltage range of 1.71V to 3.6V, making it compatible with standard battery chemistries. Additionally, it features a 12-bit ADC with up to 16 channels, a 12-bit DAC, and an operational amplifier, enabling analog signal processing without external components. From a technical perspective, the STM32L431RCT6 leverages ST's advanced 90nm process technology, which contributes to its low power consumption and high performance. The core runs at up to 80 MHz, delivering 100 DMIPS (Dhrystone 2.1) performance. The device includes a memory protection unit (MPU) and a nested vectored interrupt controller (NVIC) for efficient interrupt handling. It also supports a wide range of communication interfaces, including USB 2.0 full-speed, CAN 2.0B, and SAI (serial audio interface), making it versatile for connectivity applications. Typical applications for the STM32L431RCT6 include industrial sensors, smart meters, portable medical devices, and IoT nodes. Its low-power characteristics make it particularly well-suited for battery-powered devices that require long operational lifetimes. The device also supports a variety of development tools, including STM32CubeIDE, STM32CubeMX, and the STM32CubeL4 firmware package, which simplifies software development and reduces time-to-market. When designing with the STM32L431RCT6, it is important to consider the power supply decoupling and PCB layout to ensure stable operation. The device requires a 100nF capacitor on each power pin and a 4.7uF capacitor on the main supply. Additionally, the VDDA pin should be connected to a clean analog supply to minimize noise in analog peripherals. Proper grounding and layout are essential to achieve the specified performance and low-power operation.

USD $8.59 اتصل بنا
STM32L431VCI6 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L431VCI6

STM32L431VCI6 - 80MHz Cortex-M4 MCU | STMicroelectronics

STMicroelectronics STM32L431VCI6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 RISC core, operating at up to 80 MHz and containing 256 KB of Flash memory. The device is offered in a 100-pin UFBGA package measuring 7 x 7 mm. Its Cortex-M4F core includes a single-precision floating-point unit and DSP instructions for efficient arithmetic and signal-processing workloads. An ultra-low-power microcontroller is an embedded processing component designed to balance computational capability with energy efficiency. Within the device hierarchy, the STM32L431VCI6 is a 32-bit microcontroller built around the Arm Cortex-M4 processor core. It belongs to STMicroelectronics' STM32L4 family and supports applications in which compact size, low-power operation, mixed-signal control, communications, and real-time processing are important. Core features include an operating frequency of up to 80 MHz, 256 KB of Flash, single-precision floating-point hardware, and DSP instruction support. The 100-UFBGA package provides a compact surface-mount solution for space-constrained embedded products. Operating voltage selections shown for this exact device include 1.8 V, 2.5 V, and 3.3 V, allowing integration with common low-voltage embedded systems. The manufacturer identifies the device as an ultra-low-power Arm Cortex-M4 MCU. The Cortex-M4 architecture combines a 32-bit RISC instruction set with an efficient exception-based operating model and hardware features suited to control workloads. The floating-point unit accelerates single-precision operations without requiring software emulation, while DSP instructions support common filtering and signal-processing calculations. These capabilities make the MCU suitable for connected sensors, industrial controls, medical instruments, and low-power embedded products requiring more performance than a basic Cortex-M0-class device. Typical applications include low-power sensor nodes, industrial monitoring equipment, compact data loggers, connected measurement instruments, and embedded control systems. The 256 KB Flash capacity provides room for application firmware and configuration data, while the 7 x 7 mm UFBGA package helps reduce board footprint. Confirm peripheral assignments, clock configuration, and power-supply requirements against the manufacturer datasheet before finalizing a PCB layout. For PCB implementation, use the manufacturer land pattern for the 100-UFBGA package and preserve the documented pin, power, ground, decoupling, and programming connections. Because this package has a fine ball pitch and 100 terminals, inspect the assembled board for solder bridges and verify continuity on every power rail. Match external crystal, reset, and boot circuitry to the device reference configuration rather than relying on another STM32 footprint. This page combines the manufacturer product information with practical implementation guidance, focused comparisons, and verified source links. It also distinguishes the exact STM32L431VCI6 configuration from related STM32L431 family variants so engineers can assess memory capacity, package, and qualification requirements before selecting a replacement.

طلب عرض سعر اتصل بنا
STM32L431VCT6 - 80MHz Cortex-M4F MCU | STMicroelectronics
STM32L431VCT6

STM32L431VCT6 - 80MHz Cortex-M4F MCU | STMicroelectronics

STMicroelectronics STM32L431VCT6 is an ultra-low-power 32-bit microcontroller built around an Arm Cortex-M4 processor with single-precision floating-point unit, operating up to 80 MHz. The device provides 256 KB of Flash memory and is supplied in a 100-pin LQFP package measuring 14 mm by 14 mm. An ultra-low-power microcontroller is an embedded processing device designed to balance computational performance with low energy consumption. The STM32L431VC family belongs to the STM32L4 series and combines an Arm Cortex-M4 RISC core, embedded Flash, SRAM, analog resources, timers, and communication peripherals within one integrated circuit. This hierarchy places the MCU above the Cortex-M4 processor core and below the broader embedded semiconductor and industrial-control device categories. The STM32L431VCT6 operates as a 32-bit Arm Cortex-M4 MCU with a maximum frequency of 80 MHz. Its Cortex-M4 core includes a single-precision FPU capable of executing single-precision floating-point instructions, while the processor also supports a full set of DSP instructions. The 256 KB Flash configuration provides dedicated program storage, while the 64 KB SRAM value reported for the device supports working memory for control loops, communications, and peripheral data handling. The 100-pin LQFP package exposes substantially more I/O than smaller 32-pin or 64-pin microcontroller packages, allowing integration of multiple analog inputs, timers, serial interfaces, and external-memory connections on one device. Its 14 mm by 14 mm leaded package is also suitable for automated assembly and inspection processes. The operating temperature grade encoded by the T6 suffix and the complete ordering-code details should be confirmed against the manufacturer ordering information before production release. Typical uses include industrial sensor nodes, compact industrial controllers, connected measurement equipment, building-automation controllers, battery-powered condition-monitoring systems, and low-power embedded gateways. The Cortex-M4F processing capability is particularly useful when the control application must process sampled analog values or implement digital signal-processing routines without using a higher-power application processor. PCB planning should begin with the manufacturer's 100-pin package drawing and land pattern. Place decoupling capacitors close to the supply and ground pins, preserve the recommended clock and debug connections, and route sensitive analog inputs away from fast-switching nodes. Firmware, peripheral configuration, pin multiplexing, and low-power behavior should be validated against the STM32L431xx datasheet rather than inferred solely from the order code. This product record combines the verified 80 MHz operating frequency, Cortex-M4F architecture, 256 KB Flash capacity, 64 KB SRAM, and 100-pin LQFP construction with practical design guidance. It also distinguishes verified characteristics from parameters that require direct confirmation in the manufacturer datasheet, helping engineers assess fit before layout, sourcing, and firmware development begin.

طلب عرض سعر اتصل بنا
STM32L432KCU3 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L432KCU3

STM32L432KCU3 - 80MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32L432KCU3 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with FPU, operating up to 80 MHz and delivering up to 100 DMIPS. It integrates 256 KB of Flash memory and 64 KB of SRAM, supports USB full-speed, analog, and audio functions, and is packaged in a 32-pin UFQFPN measuring 5 mm by 5 mm. An ultra-low-power microcontroller is a compact embedded processing device designed to balance real-time computation with constrained energy use. The STM32L4 family combines a Cortex-M4 processor, embedded memory, analog conversion, connectivity, and low-power peripherals within a single system-on-chip. Its position in the hierarchy is microcontroller, embedded processor, Arm Cortex-M microcontroller, and finally semiconductor, making it suitable for compact control systems that require more performance than a basic low-power MCU. Key features include an 80 MHz Cortex-M4 core, 256 KB of Flash, 64 KB of SRAM, a floating-point unit, USB full-speed support, and analog and audio capabilities. The processor can execute up to 100 DMIPS, making it suitable for responsive control loops, communications, data acquisition, and compact user-interface logic. Its 32-pin UFQFPN package also supports space-constrained board layouts requiring numerous mixed-signal and peripheral connections. The Arm Cortex-M4 architecture provides a 32-bit RISC instruction set with hardware floating-point support, reducing the software burden for common control and signal-processing calculations. USB full-speed connectivity permits direct peripheral interfacing, while the integrated analog, audio, and low-power features reduce the need for separate components in embedded designs. Designers should still verify the exact peripheral allocation, clock configuration, and operating limits for each board design against the manufacturer datasheet. Typical applications include USB-connected data loggers, compact industrial condition-monitoring nodes, low-power audio-control systems, sensor-hub controllers, and wearable or portable measurement equipment. In each case, the combination of 256 KB Flash, 64 KB SRAM, USB full-speed, and an 80 MHz processing core supports moderate firmware complexity while retaining a small 5 mm by 5 mm footprint. The primary design consideration is complete pin and peripheral validation before layout. Confirm USB routing requirements, decoupling, exposed-pad thermal management, oscillator connections, and all required alternate-function assignments in the manufacturer pin-description table. Preserve the exposed-pad land pattern and follow the package land-pattern guidance when creating the PCB footprint. This product page consolidates core specifications, same-family drop-in candidates, application guidance, package considerations, and design notes. It helps engineers compare memory, core frequency, interface capability, and footprint while completing an STM32L432KCU3 datasheet, pinout, replacement, and sourcing review.

طلب عرض سعر اتصل بنا
STM32L432KCU6 - 80MHz Cortex-M4 MCU 256KB Flash | STMicroelectronics
STM32L432KCU6

STM32L432KCU6 - 80MHz Cortex-M4 MCU 256KB Flash | STMicroelectronics

The STMicroelectronics STM32L432KCU6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 core with FPU and DSP instructions, operating at up to 80 MHz, with 256 KB of Flash memory and 64 KB of SRAM, housed in a 32-pin UFQFPN (5x5 mm) package. An Arm Cortex-M4 microcontroller is a 32-bit RISC processor that integrates a floating-point unit (FPU), single-cycle DSP multiply-accumulate instructions, and a memory protection unit (MPU), positioning it in the hierarchy: Cortex-M4 MCU -> 32-bit microcontroller -> embedded processor -> semiconductor. Microcontrollers of this class combine CPU, memory, and peripherals on a single die, making them the default choice for compact, energy-conscious embedded systems. Key differentiating features include industry-leading low-power modes: 100 nA in Shutdown mode, 3.4 uA in Stop 2 with RTC running, and a Low-power run mode down to 1.71V supply. The device integrates a 12-bit ADC with hardware oversampling (up to 5.33 Msps), a 12-bit DAC, two op-amps, comparators, and a true random number generator (TRNG), providing a complete analog signal chain on chip. Technically, the STM32L432KCU6 uses STMicroelectronics' ultra-low-power process technology with the ART Accelerator enabling zero-wait-state execution from Flash, sustaining 100 DMIPS and 273 CoreMark at 80 MHz. Flexible clocking includes a multi-speed internal oscillator (MSI) from 100 kHz to 48 MHz, plus 4 MHz HSI, 32 kHz LSE and an external oscillator option. Communication interfaces include USB 2.0 full-speed device, three USARTs, one UART, two SPI, and two I2C. Typical applications include battery-powered IoT sensor nodes, wearable health devices, and portable medical instrumentation, where the combination of 3.4 uA Stop 2 current and integrated analog peripherals directly extends battery life and reduces BOM count. Design consideration: exploit the MSI oscillator calibrated against the LSE to eliminate the external crystal in UART or USB-light designs, saving board area and cost; place 100 nF decoupling capacitors at each VDD/VDDA pin per ST layout guidance. This page synthesizes distributor pricing, pin-compatible alternatives, design notes, and FAQ content not found in the manufacturer datasheet, verified as of 2026-09-06.

طلب عرض سعر اتصل بنا
STM32L433CCT3 - 80MHz Cortex-M4 MCU | STMicroelectronics
STM32L433CCT3

STM32L433CCT3 - 80MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32L433CCT3 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M4 processor, operating at up to 80 MHz with 256 KB of Flash memory and 64 KB of SRAM. It is packaged in a 48-LQFP 7 x 7 mm package and operates from a 1.71 V to 3.6 V supply. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. The STM32L433 belongs to the STM32L4 series of low-power microcontrollers. This product type sits within the hierarchy of embedded processor, microcontroller, 32-bit MCU, and power-managed semiconductor, providing more computation than an 8-bit MCU while supporting efficient low-power operation. Principal features include a 32-bit Cortex-M4 core with floating-point unit, up to 100 DMIPS, USB full-speed support, LCD controller capability, and an external switched-mode power supply option. The device also includes backup-domain features suited to low-power products: the manufacturer lists 200 nA consumption in VBAT mode for the real-time clock and 32 backup registers of 32 bits each. Its memory configuration provides 256 Kbytes of Flash for firmware and 64 KB of SRAM for working data. The STM32L433CC family combines conventional embedded-control capability with energy-conscious modes and integrated connectivity. USB full-speed and LCD support make the device useful for compact human-interface products, while the Cortex-M4 floating-point unit accelerates control algorithms, filtering, and general signal-processing tasks. The 1.71 V minimum operating voltage also permits designs powered from a single Li-ion cell with an appropriate regulator. Typical applications include low-power sensor nodes, industrial condition-monitoring equipment, compact medical-control modules, USB-connected data loggers, energy meters, and LCD-equipped handheld products. In each case, the MCU can execute real-time control functions while retaining USB connectivity and multiple low-power operating states to extend battery life. A principal design consideration is validating the exact peripheral assignment, boot configuration, and pin multiplexing for the assembled PCB. Use the manufacturer pin-description table when assigning alternate functions and confirm the selected regulator meets both the 1.71 V to 3.6 V operating range and peripheral-specific supply requirements. This product overview combines the STM32L433CC family architecture, package information, low-power characteristics, and replacement analysis to support early design decisions. For an exact PCB replacement, verify pin functions, boot settings, firmware device configuration, temperature grade, and package orientation against the manufacturer datasheet.

طلب عرض سعر اتصل بنا
STM32L433CCT6 - 80MHz Cortex-M4 256KB Flash | STMicroelectronics
STM32L433CCT6

STM32L433CCT6 - 80MHz Cortex-M4 256KB Flash | STMicroelectronics

The STMicroelectronics STM32L433CCT6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with an FPU, operating at up to 80 MHz and delivering up to 100 DMIPS. It provides up to 256 KB of embedded Flash memory and 64 KB of SRAM, with USB full-speed, LCD, and external SMPS support. The device is packaged in a 48-LQFP package measuring 7 mm by 7 mm. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The STM32L433xx family belongs to the STM32L4 ultra-low-power line and combines Cortex-M4 real-time processing with energy-conscious operation for embedded control, sensor, communication, and human-interface applications. Its Arm Cortex-M4 architecture provides a 32-bit RISC instruction set, while the integrated floating-point unit supports efficient control and signal-processing calculations. The headline features of the STM32L433CCT6 are its 80 MHz maximum operating frequency, 100 DMIPS processing capability, 256 KB Flash memory, and 64 KB SRAM. USB full-speed connectivity enables USB peripherals and host or device communication, while LCD support simplifies connected displays. External SMPS support is useful in designs where the MCU controls a dedicated switched-capacitor or switching-mode power-supply stage. The STM32L433xx architecture is designed for low-power embedded systems while retaining a high-performance Cortex-M4 core and integrated floating-point hardware. The 256 KB Flash capacity is suitable for firmware, boot code, configuration data, and application logic, while 64 KB SRAM supports working memory, buffers, stacks, and peripheral data movement. The combination of USB, LCD, and external SMPS support reduces the number of separate components needed in compact embedded platforms. Typical applications include USB-connected sensor nodes, industrial control and monitoring equipment, compact human-interface panels, connected measurement instruments, and low-power embedded gateways. The LCD and USB features make the device useful in devices that need local display feedback and USB connectivity, while the Cortex-M4 FPU is appropriate for real-time control and floating-point signal processing. When designing around the STM32L433CCT6, check the device-specific pin assignments, power-supply requirements, clock configuration, decoupling recommendations, and exposed-pad connection in the manufacturer datasheet. The 7 mm by 7 mm LQFP footprint supports conventional PCB assembly, but signal integrity and thermal performance still depend on the surrounding layout and power-delivery network.

طلب عرض سعر اتصل بنا