المنتجات (46,000+)

XC7A75T-2FT256I - 75K Logic Cell Artix-7 FPGA | AMD
XC7A75T-2FT256I

XC7A75T-2FT256I - 75K Logic Cell Artix-7 FPGA | AMD

The AMD XC7A75T-2FT256I is an Artix-7 field-programmable gate array with 3,870,720 RAM bits, a -2 performance grade, and an industrial temperature designation in a 256-FTBGA package. The supplied data identifies a 17 x 17 mm package and tray packaging, making it a high-density programmable logic option for embedded control, signal processing, communications, and industrial automation systems. Its exact logic-cell count, I/O count, voltage ratings, and timing figures are not stated in the verified snippets and therefore remain marked as data needed. An FPGA is a semiconductor device whose programmable logic, memory, and I/O resources can be configured after manufacture. Artix-7 belongs to the AMD/Xilinx FPGA product hierarchy and uses a 28 nm process platform, as described on the verified AMD Artix-7 product page. Within the broader category of programmable logic devices, the XC7A75T family is positioned between smaller control-oriented devices and larger communications or processing devices. The XC7A75T-2FT256I combines a 3,870,720-bit memory resource with a compact 256-ball package for designs requiring substantial configurable logic in a relatively small board area. The verified listing supplies the product identity as an Artix-7 FPGA IC with 170, 3,870,720, 75,520, and 256-LBGA attributes, while the detailed product result describes a 256-FTBGA package. These numbers should not be conflated without the manufacturer pinout and device-selection documentation. The -2 suffix denotes the requested speed grade in the ordering nomenclature, but the verified material does not provide operating frequencies or timing margins. The exact performance grade limits, I/O standards, block RAM organization, DSP resources, configuration interface, and power characteristics require manufacturer datasheet verification before schematic capture or timing closure. This device is suitable for industrial control logic, sensor acquisition, motor-control interfaces, low- and medium-speed communications, test equipment, and embedded instrumentation. A design team can use programmable fabric for parallel interfaces, state machines, protocol handling, and control paths while using block RAM for buffering and DSP slices for selected arithmetic operations. The industrial temperature result covers -40°C to 100°C junction temperature according to the supplied distributor data, but temperature behavior still depends on the final system power dissipation, airflow, board construction, and selected FPGA grade. For implementation, preserve the exact 256-FTBGA land pattern, ball assignments, power rails, decoupling requirements, configuration pins, and I/O-bank constraints defined by AMD. Do not substitute a visually similar 256-ball package without checking the official package files and UG475 pinout documentation. Configuration storage, startup behavior, clocking, JTAG access, and bitstream generation should be validated in AMD Vivado or another explicitly supported FPGA toolchain. A common engineering pitfall is treating a distributor similarity result as proof of interchangeability; FPGA replacement requires exact package, pin, speed, temperature, resource, and bitstream compatibility. This page consolidates the verified distributor identity, package information, public AMD family description, package-pinout references, and practical selection considerations. It distinguishes confirmed data from parameters that require confirmation, helping engineers evaluate sourcing, footprint matching, and migration risk before committing to a 256-FTBGA FPGA layout.

طلب عرض سعر اتصل بنا
XC7A75T-2FTG256I - 75K Logic Cell Artix-7 FPGA | AMD
XC7A75T-2FTG256I

XC7A75T-2FTG256I - 75K Logic Cell Artix-7 FPGA | AMD

The AMD XC7A75T-2FTG256I is an Artix-7 field-programmable gate array with 75,520 logic cells, 170 I/Os and a 256-ball FBGA package. It uses 28 nm CMOS technology, operates from a 1 V core supply, and is configured for industrial-temperature applications. The device combines programmable logic resources, DSP blocks, block RAM, clock-management circuitry and high-speed serial transceivers in one cost-sensitive FPGA platform. An FPGA is a semiconductor whose digital behavior is defined after manufacture by loading a configuration bitstream. Artix-7 belongs to the AMD 7 Series FPGA family, which sits within the broader semiconductor and programmable-logic hierarchy. The XC7A75T device is positioned above smaller Artix-7 members in logic density while retaining the low-cost and power-efficient characteristics associated with the Artix-7 product line. It is suited to designs requiring substantial parallel processing but not the very high logic capacity of Kintex-7 or Virtex-7 devices. The 75,520 logic cells and 11,800 adaptive logic modules provide substantial programmable fabric for control logic, protocol handling and image-processing pipelines. The device includes 628 DSP slices, block RAM for frame buffers and data queues, and mixed-signal resources for precision analog interfaces. Its 170 user I/Os support connections to external memory, sensors, displays, converters and industrial peripherals. The -2 speed designation identifies the device performance grade, while the final I suffix identifies the industrial-temperature option. The 28 nm CMOS implementation and low-power Artix-7 architecture target high performance per watt. Dedicated clock-management and DSP resources reduce the amount of general-purpose logic needed for common filtering, waveform generation and clocking functions. High-speed serial transceivers also allow Artix-7 designs to implement serial links directly in the FPGA instead of requiring separate physical-layer devices when the interface rates and protocols are supported. Typical uses include industrial automation, motor control, robotics, sensor acquisition, test equipment, camera and image processing, communications gateways, embedded control and low-cost prototyping. Its 75K-cell fabric allows multiple control paths and parallel algorithms to be combined in one device, while the 628 DSP slices accelerate multiplication and filtering operations. The 256-ball FBGA package supports dense routing but requires careful PCB layout, power planning and thermal analysis. Designers should assign power, ground and signal pins according to the AMD package pinout files and use the UG475 package specification when assigning PCB tracks. Decoupling must be placed close to supply pins, unused I/Os should be handled according to the configuration guidance, and every bank must satisfy its voltage and clocking constraints. Differential pairs and high-speed links require controlled impedance, length matching and uninterrupted reference planes. This page combines the exact XC7A75T-2FTG256I identity, verified device characteristics, same-package Artix-7 drop-in options and practical implementation guidance. It also distinguishes speed, temperature and package options so engineers can select a replacement without overlooking PCB or qualification constraints.

طلب عرض سعر اتصل بنا
XC7A75T-3CSG324E - Artix-7 210-I/O FPGA | AMD
XC7A75T-3CSG324E

XC7A75T-3CSG324E - Artix-7 210-I/O FPGA | AMD

The AMD XC7A75T-3CSG324E is an Artix-7 field-programmable gate array with 75,520 logic cells, 210 user I/O, and a maximum switching frequency of 628 MHz, supplied in a 324-LFBGA CSPBGA package. Its core voltage range is 950 mV to 1.05 V. The -3 speed designation identifies the performance grade, while the CSG324 suffix identifies the 324-ball package configuration. An FPGA is a reconfigurable digital semiconductor in which programmable logic blocks, memory, and I/O resources implement custom digital systems after fabrication. Artix-7 belongs to the broader FPGA and programmable-logic hierarchy, combining parallel programmable logic with digital signal processing, clock management, block RAM, and high-speed serial transceivers. This makes the device suitable when design flexibility is more important than the power efficiency of a fixed-function ASIC. The XC7A75T provides 75,520 logic cells and 210 I/O in one compact package. Its 628 MHz maximum switching frequency supports demanding control, acquisition, communications, and embedded-processing designs. The 324-LFBGA configuration also exposes substantially more interconnect and I/O resources than the smaller Artix-7 packages, making it appropriate for board-level designs that need multiple high-speed interfaces and external memory connections. The device contains mixed resources rather than only general-purpose gates. Depending on the selected Artix-7 configuration, these can include dedicated block RAM, digital signal processing slices, clock-management resources, and high-speed transceivers. This heterogeneous architecture allows parallel data paths, time-domain functions, packet handling, and control logic to share one programmable device, reducing the number of supporting ICs on a complex board. Typical uses include industrial automation, test and measurement, communication equipment, embedded instrumentation, and high-speed digital control. The 210-I/O count is particularly useful for parallel sensor interfaces, memory buses, board-level control, and multi-channel acquisition. Designers must still account for speed grade, temperature grade, power budgeting, pin constraints, and the high pin count when laying out the BGA PCB. A critical implementation consideration is the CSG324 BGA footprint. Its 0.8 mm ball pitch requires a constrained-layer PCB, precise component placement, appropriate escape routing, and careful via-in-pad or fanout strategy. Power delivery must also support the 950 mV to 1.05 V core range while keeping each supply rail within its published limits. This page combines the verified distributor and manufacturer information for the XC7A75T-3CSG324E with same-package family alternatives, comparison parameters, application guidance, and practical PCB considerations. It distinguishes confirmed values from specifications that still require verification against the complete manufacturer datasheet.

طلب عرض سعر اتصل بنا
XC7A75T-3FGG484E - Artix-7 FPGA, 75520 Logic Cells, 285 I/O | AMD
XC7A75T-3FGG484E

XC7A75T-3FGG484E - Artix-7 FPGA, 75520 Logic Cells, 285 I/O | AMD

The AMD Xilinx XC7A75T-3FGG484E is an Artix-7 field-programmable gate array (FPGA) with 75,520 logic cells, 285 user I/O pins, and a maximum clock frequency of 628 MHz, housed in a 484-ball FBGA (FGG484) surface-mount package. It is built on the 28 nm Xilinx 7 series FPGA fabric, delivering high performance-per-watt logic capacity for cost-sensitive, small form factor designs. An FPGA is a programmable logic device: a semiconductor whose internal array of configurable logic blocks, block RAM, DSP slices, and I/O banks is re-programmed by the user to implement any digital circuit from a hardware description written in Verilog or VHDL. In the product hierarchy, an FPGA sits above a CPLD: FPGAs offer far higher logic density, dedicated hard multipliers, high-speed serial transceivers, and memory resources, while CPLDs are simpler, lower-capacity devices. The Artix-7 family occupies the cost-optimized tier of the Xilinx 7 series, below the Kintex-7 and Virtex-7 performance tiers, and above the small Zynq-7000 SoCs with integrated ARM processors. The "-3" in the part number is the speed grade, indicating the maximum operating performance class of the device, while the trailing "E" designates the extended commercial temperature qualification. The FGG484 package is a 17 x 17 mm, 0.8 mm-pitch flip-chip BGA that supports up to 285 user I/O in the FGG484 configuration. Compared with the larger FGG676 and FF676 packages, FGG484 trades I/O count for a smaller board footprint, which is attractive for compact industrial, communications, and test-and-measurement equipment. Because the device is SRAM-based, configuration data must be loaded at every power-up from a flash PROM, SPI flash, or a host processor such as a Zynq or MicroBlaze. AMD supplies the Artix-7 package pinout files in ASCII and CSV formats per UG475, which are the authoritative reference for board-level symbol generation and ball assignment. Typical applications for the XC7A75T-3FGG484E include industrial Ethernet and serial protocol bridges, data acquisition and control systems, video timing and scaler pipelines, instrumentation and test equipment, and low-cost embedded processing subsystems with an external host processor. Its 484-ball FBGA also makes it a natural fit for multi-die mixed-signal boards where a mid-density FPGA handles protocol conversion and local buffering. A key design consideration is power and thermal budget: a 28 nm Artix-7 device dissipating several watts in a 17 x 17 mm BGA requires careful via-in-pad and copper-pour thermal design on the PCB, and the specified junction temperature limits of the -3E grade must be respected with margin. When a smaller footprint is acceptable, the FGG484 package is often paired with a companion XC7A50T or XC7A35T device on the same board to split protocol and DSP workloads without changing the PCB footprint family. This page consolidates distributor pricing as of 2026-10-30, same-package drop-in alternatives drawn from the Artix-7 and Kintex-7 families, a parameter-by-parameter comparison, and practical board-level design guidance that is not reproduced in the manufacturer datasheet.

طلب عرض سعر اتصل بنا
XC7A75T-3FGG676E - 75,520-Cell Artix-7 FPGA | AMD
XC7A75T-3FGG676E

XC7A75T-3FGG676E - 75,520-Cell Artix-7 FPGA | AMD

AMD XC7A75T-3FGG676E is an Artix-7 field-programmable gate array with 75,520 logic cells, 28 nm CMOS technology, a 1 V supply, 300 user I/Os, and a 676-pin FBGA package. It combines programmable logic resources with high-speed parallel I/O in a package designated FGG676, supplied in a tray according to the verified distributor data. An FPGA is a programmable logic device in the semiconductor hierarchy. Its configurable logic blocks, block RAM, programmable I/O, and dedicated resources allow engineers to implement digital systems that would otherwise require combinations of fixed-function ICs. Artix-7 belongs to the FPGA and CPLD family of programmable logic devices, positioned between simpler programmable logic and larger system-on-chip devices. The XC7A75T provides 75,520 logic cells and 300 user I/Os. Its 28 nm CMOS process supports a 1 V operating supply, while the -3 ordering designation identifies the performance grade of this device. The FGG676 package provides 676 package balls and, according to the verified source, uses a 1.0 mm ball pitch on a 27 mm square footprint. These characteristics make the device suitable for designs requiring substantial parallel connectivity. The device is intended for industrial, communications, instrumentation, embedded processing, and high-speed digital interface applications. A representative implementation could use configurable logic for protocol conversion, embedded RAM for buffering, and programmable I/O for acquisition or control interfaces. Because the exact resources for each Artix-7 speed and package combination are organized by device variant, engineers should confirm the applicable Artix-7 data sheet and package files during design review. The extended-temperature order suffix E makes this part relevant to designs requiring operation beyond the usual commercial temperature envelope, but the exact junction and ambient limits must be selected from the manufacturer ordering guide. Commercial, industrial, and extended-temperature variants can share a package while differing in qualification and temperature requirements. A critical hardware consideration is that the 676-ball FBGA package has a fine 1.0 mm ball pitch. PCB escape routing must be designed with the manufacturer package symbol, differential-pair geometry, power planes, and via requirements taken directly from the package design files. Thermal performance also depends on multilayer construction, copper distribution, airflow, and the adjacent heat-spreader or thermal-interface strategy. This page consolidates verified package, process, logic-cell, I/O, and sourcing information while explicitly separating unavailable electrical details. It also provides same-family migration comparisons, practical PCB guidance, and a structured selection framework for engineers evaluating the XC7A75T-3FGG676E against other Artix-7 speed, temperature, and package options.

طلب عرض سعر اتصل بنا
XC7A75T-L1CSG324I - 28nm Artix-7 75,520-LC FPGA | AMD
XC7A75T-L1CSG324I

XC7A75T-L1CSG324I - 28nm Artix-7 75,520-LC FPGA | AMD

The AMD XC7A75T-L1CSG324I is an Artix-7 field-programmable gate array built on a 28 nm CMOS process, providing 75,520 logic cells, approximately 210 user I/O, and 3.8 MB of block RAM in a 324-ball CSBGA package. The L1 grade operates at a 0.95 V core voltage, while the family supports lower-voltage options for power-sensitive designs. An FPGA is a programmable semiconductor containing configurable logic blocks, block RAM, programmable I/O, and dedicated digital signal processing resources. Artix-7 devices occupy the middle of the AMD product hierarchy between small Spartan-6 devices and larger Virtex-7 devices, providing a balance of logic density, signal-processing capability, and cost for industrial, communications, instrumentation, and embedded control systems. Key resources include 75,520 logic cells, 3.8 MB of block RAM, dedicated DSP slices, and approximately 210 user I/O. The 324-ball CSBGA package supports dense board-level integration while keeping the device within the CSG324 family footprint. Programming is handled through the AMD FPGA programming toolchain, and configuration data can be loaded from serial flash or another supported configuration source. The 28 nm Artix-7 architecture combines programmable logic, dedicated block RAM, digital signal processing slices, and high-speed serial transceiver resources in devices intended for high performance per watt. The L1 voltage option supports systems where core power is a primary thermal constraint, but the complete design must still account for I/O rail power, configuration current, and the operating-power profile of the selected design. Typical uses include industrial automation, motor and motion control, sensor acquisition, communications infrastructure, embedded vision, and test-and-measurement systems. The FPGA is particularly useful where parallel data acquisition, deterministic control, hardware timing, and post-deployment logic updates must be combined in one device. When planning the PCB, follow the AMD CSG324 package pinout files and UG475 for ball assignment, power rails, configuration pins, and high-speed layout. Provide the required decoupling, preserve the specified power-up sequence, and keep configuration signals away from noisy analog or high-current switching nodes. This page organizes package, resource, replacement, and design information for engineers evaluating the XC7A75T-L1CSG324I. It also identifies same-footprint Artix-7 options and distinguishes speed-grade, voltage-grade, and temperature-grade changes that affect firmware, timing, and thermal qualification.

طلب عرض سعر اتصل بنا
XC7A75T-L2CSG324E - 75,520-Cell Artix-7 FPGA | AMD
XC7A75T-L2CSG324E

XC7A75T-L2CSG324E - 75,520-Cell Artix-7 FPGA | AMD

The AMD XC7A75T-L2CSG324E is an Artix-7 field-programmable gate array built on a 28 nm process, with 75,520 logic cells, 210 user I/Os, and a 1.0 V core supply in a 324-ball CSBGA package. It combines 3.87 Mb of block RAM and 180 DSP48E1 slices with a 15 x 15 mm package footprint. An FPGA is a programmable-logic semiconductor whose lookup tables, flip-flops, interconnect, block RAM, and dedicated processing resources can be configured after manufacture. The Artix-7 family occupies the position between low-cost microcontroller-oriented programmable devices and larger programmable-logic families. Its integrated resources support parallel data processing, control logic, serial interfaces, video pipelines, and embedded processor systems. Key resources include 75,520 logic cells, 210 user I/Os, 180 DSP48E1 slices, and 3.87 Mb of total block RAM. The device provides 387,072 internal configuration bits and is identified in the Artix-7 documentation as a 1.0 V device. The L2 designation identifies a distinct Artix-7 speed and temperature ordering option, while CSG324 identifies the 324-ball chip-scale BGA package. The CSG324 package supports high pin counts in a compact 15 x 15 mm area, making it suitable for dense boards with many high-speed memory and serial interfaces. Because ball-grid assignments do not follow the linear perimeter numbering of a dual-inline package, PCB routing must use the AMD package pinout files rather than an inferred sequence. The package also requires thermal planning for sustained high switching activity. Typical applications include industrial control and automation, instrumentation, embedded vision, network interface equipment, and compact digital signal-processing systems. The 210 I/Os allow connection to external DDR memory, parallel sensors, transceivers, and high-speed parallel buses, while the DSP48E1 columns provide dedicated multiply-accumulate resources for filtering and fixed-point arithmetic. For a successful design, verify the exact bank voltages, configuration interface, clocking requirements, and differential I/O standards against the Artix-7 package data. Use the AMD package pinout files and the device-specific UG475 information when assigning PCB layers, and complete timing and thermal validation before releasing a production board. This page organizes the device's logic, memory, DSP, package, temperature, and sourcing information while adding application guidance, comparison parameters, and design cautions that help engineers evaluate the XC7A75T-L2CSG324E before layout and procurement.

طلب عرض سعر اتصل بنا
XC7A75T-L2FGG484E - 28nm Artix-7 FPGA 75520 Cells | AMD
XC7A75T-L2FGG484E

XC7A75T-L2FGG484E - 28nm Artix-7 FPGA 75520 Cells | AMD

The AMD XC7A75T-L2FGG484E is an Artix-7 field-programmable gate array built on 28 nm process technology, with 75,520 logic cells, 285 I/O, and a 1 V core supply in a 484-pin FBGA package. The device combines programmable logic resources, block RAM, DSP slices, and selectable I/O standards for compact embedded, industrial, communications, and test systems. A field-programmable gate array, or FPGA, is a semiconductor device whose logic, interconnect, and signal-processing functions are configured after fabrication. An Artix-7 FPGA belongs to the FPGA and CPLD hierarchy and provides programmable hardware acceleration where a microprocessor or microcontroller would otherwise require external logic, repeated software execution, or additional peripherals. The XC7A75T family is positioned for designs that need substantial parallel processing without the resource level of larger FPGA families. The XC7A75T device provides 75,520 programmable logic cells, 3,780 Kb of block RAM, 180 DSP slices, and 285 I/O. Its 1 V core operating supply supports modern high-performance FPGA fabrics, while the FGG484 package provides a 23 mm by 23 mm surface-mount footprint for systems requiring high I/O density. The L2 speed grade and extended-temperature ordering suffix identify the specific performance and environmental ordering configuration. The device architecture supports parallel datapaths, fixed-point and floating-point DSP operations, high-speed serial connectivity, and programmable I/O. These characteristics make it suitable for industrial control, communications infrastructure, instrumentation, embedded vision, and test-and-measurement platforms where deterministic hardware logic is advantageous. The 180 DSP slices can accelerate filtering, modulation, correlation, and other arithmetic pipelines without relying entirely on a general-purpose processor. Designs using the XC7A75T-L2FGG484E should pay attention to the power budget, decoupling strategy, configuration pins, clocking architecture, and high-speed I/O implementation guidelines. A low-noise supply, proper clock distribution, and manufacturer-recommended PCB layout practices are especially important when the FPGA drives demanding external interfaces. Configuration storage, startup sequencing, and JTAG access should be planned early in the board design. This page combines the device identity, package details, application guidance, drop-in alternatives, and engineering design notes for faster component selection. Use the Artix-7 package pinout files and device documentation when assigning every power, ground, configuration, clock, and user I/O connection.

طلب عرض سعر اتصل بنا
XC7A75T-L2FGG676E - 75,520-Cell Low-Power Artix-7 FPGA
XC7A75T-L2FGG676E

XC7A75T-L2FGG676E - 75,520-Cell Low-Power Artix-7 FPGA

The AMD XC7A75T-L2FGG676E is a low-power Artix-7 field-programmable gate array with 75,520 logic cells, 300 I/O, and a 676-pin fine-pitch BGA package. It is manufactured using 28 nm CMOS technology and is identified with a 0.9 V core supply specification. The device provides programmable logic resources for cost-sensitive embedded systems requiring high integration, parallel I/O, and reconfigurable hardware. An FPGA is a programmable semiconductor whose internal logic, interconnect, and I/O blocks can be configured after manufacture. The Artix-7 family occupies the FPGA level within the broader reconfigurable-logic hierarchy and is intended for applications where programmable logic is preferable to a fixed-function ASIC. Its logic fabric combines with package I/O and dedicated configuration resources to support custom digital control, signal processing, and interface bridging. The principal verified characteristics are the 75,520-cell Artix-7 logic configuration, 300 available I/O, 28 nm CMOS process technology, 0.9 V operating voltage, and 676-pin FBGA package. The L2 ordering designation identifies the low-power Artix-7 performance option, while FGG676E identifies the 676-pin fine-pitch package and the associated ordering suffix. These attributes make the XC7A75T-L2FGG676E appropriate for designs requiring substantial parallel programmable logic without the power profile of a larger FPGA family. At the architectural level, the device belongs to the Artix-7 architecture, which combines programmable logic, block RAM, DSP resources, and general-purpose I/O in a single device. Because the same physical package can be used by closely related speed-grade and temperature-grade orderings, the XC7A75T-L2FGG676E can serve as the reference configuration for controlled alternates. Migration still requires checking the exact datasheet ordering table, voltage requirements, configuration interface, and supported temperature grade. Typical uses include industrial control, communications equipment, test and measurement systems, embedded vision, and compact data-acquisition platforms. The 300 I/O count is particularly useful for parallel sensor interfaces, control buses, high-speed data capture, and systems that need multiple external signals connected directly to programmable logic. The 676-pin package also offers substantially more connection options than a small FPGA in a leaded or lower-pin-count package. The principal design consideration is careful package planning. A 676-pin fine-pitch BGA requires a qualified multilayer PCB, appropriate escape routing, controlled-impedance design, and assembly-process compatibility. Designers should preserve the voltage rails, decoupling structure, configuration pins, clocking connections, and I/O standards of the reference design rather than treating an alternate ordering code as automatically interchangeable. This product record combines the verified device identity, package details, technology specifications, compatible Artix-7 orderings, comparison parameters, and practical PCB-planning guidance. It is intended to help engineers identify the correct low-power 75,520-cell FPGA and qualify a like-for-like replacement without overlooking package, speed-grade, or temperature-grade differences.

طلب عرض سعر اتصل بنا
XC7K160T-1FB484I - 162240 Logic Cells Kintex-7 FPGA | AMD
XC7K160T-1FB484I

XC7K160T-1FB484I - 162240 Logic Cells Kintex-7 FPGA | AMD

The AMD XC7K160T-1FB484I is a Kintex-7 field-programmable gate array (FPGA) built on 28 nm technology, with 162240 logic cells, 285 I/O pins and a 484-ball FCBGA package. It is designed for high-performance programmable-logic systems that require substantial parallel processing, flexible interface support and deterministic configuration. The -1 speed grade is intended for general-purpose designs requiring reliable performance across industrial temperature conditions. An FPGA is a semiconductor whose logic, I/O and programmable interconnect resources are configured after manufacture. FPGA devices are placed between programmable processors and fixed-function application-specific integrated circuits: they can accelerate parallel algorithms, implement custom interfaces and consolidate multiple functions into one device. The Kintex-7 family combines high-performance programmable logic with advanced serial transceivers, memory resources and general-purpose I/O. The XC7K160T includes 162240 logic cells, 12675 logic cells and programmable blocks according to the product listing, 285 I/O pins and a 1 V core supply. The device is identified as a 484-BBGA, FCBGA package. Its extensive logic capacity makes it suitable for data acquisition, industrial control, communications, signal processing and test systems where parallel data paths or multiple independent functions must operate concurrently. The listed device belongs to the Kintex-7 product family, which is available in -3, -2, -1, -1L and -2L speed grades. The -2L versions are screened for lower maximum static power and can operate at lower core voltages for lower dynamic power than -2 devices. The XC7K160T-1FB484I uses the -1 grade designation, while its “I” suffix identifies the industrial temperature option in the manufacturer’s ordering nomenclature. Typical applications include high-speed data acquisition, industrial automation, communications infrastructure, embedded signal processing, FPGA-based accelerator boards and high-resolution control systems. The 285 available I/O pins also make the device useful for systems combining wide parallel buses with high-speed serial links. PCB implementation should preserve the exact 484-ball FCBGA footprint, power and ground distribution, decoupling, configuration interface and high-speed routing. Because the package contains many balls and a large FPGA configuration context, the layout should be reviewed against the manufacturer’s pinout, power guidance and design-assistance recommendations before fabrication. This product record combines the exact configuration, package and logic-density information with practical engineering guidance, qualified same-footprint alternatives and a parameter comparison. It is intended to accelerate component selection and board planning for engineers designing with the Kintex-7 XC7K160T platform.

طلب عرض سعر اتصل بنا
XC7K160T-1FB676I - Kintex-7 162240-Cell FPGA | AMD
XC7K160T-1FB676I

XC7K160T-1FB676I - Kintex-7 162240-Cell FPGA | AMD

The AMD Xilinx XC7K160T-1FB676I is a Kintex-7 field-programmable gate array built on 28 nm technology, with 162,240 programmable logic cells, 400 user I/O, and a 676-ball FCBGA package. The -1 speed grade supports demanding programmable-logic, DSP, and high-speed interface designs, while the industrial-temperature suffix identifies the XC7K160T-1FB676I as an industrial configuration. Its 676-pin FCBGA package supports dense board-level integration without changing the footprint to a leaded or smaller BGA package. A Kintex-7 FPGA belongs to the programmable-logic hierarchy: field-programmable gate array, FPGA, programmable-logic device, and semiconductor. Unlike a fixed-function ASIC or microcontroller, an FPGA combines configurable logic blocks, programmable interconnects, block RAM, DSP resources, and selectable I/O standards on one device. This makes the family useful when hardware architecture must be updated after design entry, when parallel processing is required, or when product variants share a common board design. The XC7K160T combines 162,240 logic cells with 400 user I/O in the 676-BBGA FCBGA package. The 28 nm process technology supports a compact, high-performance implementation, and the listed 1 V core supply is a key constraint for power planning and configuration. The -1 speed designation places the device in the Kintex-7 performance range identified alongside the -3, -2, -1L, and -2L grades. Design engineers must treat this BGA package as a high-speed, multi-supply design rather than a simple two-rail component. Signal-integrity analysis, simultaneous switching-noise control, plane splitting, and thermal management become essential because the device concentrates many programmable and high-speed resources into one package. Configuration storage, startup sequencing, clocking, and power estimation should be evaluated together before schematic capture. Typical applications include industrial control and automation, communications infrastructure, test and measurement, high-speed signal processing, embedded imaging, and aerospace or defense systems requiring programmable logic. The 400 available I/O is particularly useful for parallel sensor acquisition, control interfaces, memory buses, clock distribution, and multiple communication links implemented in programmable logic. For a new design, use the AMD Kintex-7 data sheet and package files to establish the exact pinout, differential-pair rules, power rails, and PCB stack-up. Treat any board migration to another 676-ball package variant as requiring a formal ball-map, power, timing, and signal-integrity review rather than an assumption of interchangeability. This product record combines the verified device identity, package information, speed and temperature distinctions, same-footprint alternatives, comparison parameters, and practical FPGA design guidance to support component selection and PCB planning without relying on generic FPGA assumptions.

طلب عرض سعر اتصل بنا
XC7K160T-1FBG484C - 162K Logic Cell Kintex-7 FPGA | AMD
XC7K160T-1FBG484C

XC7K160T-1FBG484C - 162K Logic Cell Kintex-7 FPGA | AMD

The AMD XC7K160T-1FBG484C is a Kintex-7 field-programmable gate array with 162,240 logic cells, 11,700 Kb of block RAM, and 285 user I/O in an FBG484 flip-chip BGA package. The -1 speed grade, commercial temperature designation, and 28 nm Kintex-7 architecture position this device for high-performance programmable logic, signal processing, communications, and embedded systems requiring substantial parallel processing capacity. A Kintex-7 FPGA belongs to the FPGA and CPLD product hierarchy, combining configurable logic, programmable digital signal processing, block RAM, dedicated input/output, clocking resources, and memory-mapped configuration interfaces. The Kintex-7 family extends beyond basic programmable logic by providing high-speed serial transceivers, hard memory resources, and dedicated processing blocks that can implement complete protocols, control systems, and accelerator functions in one device. The XC7K160T combines 162,240 logic cells with 11,700 Kb of block RAM, while its 285 user I/O provide substantial board-level connectivity. The device is manufactured using a 28 nm process and belongs to the Kintex-7 generation, which supports mainline connectivity including PCIe Gen3 and 10 Gigabit Ethernet. These resources are useful when a design requires parallel datapaths, protocol bridging, high-speed interfaces, or logic consolidation without using several discrete components. The FBG484 package contains 484 ball-grid positions and supports the FPGAs and CPLDs family requirement for a high-pin-count surface-mount implementation. Its ball-grid architecture accommodates numerous power, ground, configuration, clock, user I/O, and high-speed transceiver connections, but it also demands careful escape routing and multilayer PCB construction. Pin assignments, differential-pair rules, and power-decoupling requirements should be taken directly from the AMD package pinout files and the Kintex-7 family documentation. Typical applications include PCIe endpoint and interface consolidation, 10 Gigabit Ethernet control planes, industrial automation, high-speed instrumentation, communications infrastructure, radar and signal-processing systems, and accelerator logic. The large logic and RAM resources allow multiple data-processing paths to operate concurrently, while programmable I/O supports custom board-level interfaces and control functions. The principal design consideration is package complexity. A 484-ball FBG484 PCB requires careful power-plane partitioning, high-density decoupling, via-in-pad or microvia strategies where appropriate, and length-matched routing for high-speed interfaces. Designers should also account for configuration storage, clocking, startup sequencing, and thermal performance before finalizing component placement and layer count. This page combines device specifications, verified package references, same-footprint alternatives, comparison parameters, and practical PCB guidance. It is intended to accelerate engineering evaluation while keeping procurement decisions aligned with the exact XC7K160T-1FBG484C ordering code.

طلب عرض سعر اتصل بنا
XC7K160T-1FBG484I - 162K Logic Cell Kintex-7 FPGA | AMD
XC7K160T-1FBG484I

XC7K160T-1FBG484I - 162K Logic Cell Kintex-7 FPGA | AMD

The AMD XC7K160T-1FBG484I is a Kintex-7 field-programmable gate array with 162,240 logic cells, 185 I/O sites, and a 484-ball FCBGA package. It combines programmable logic, DSP resources, block RAM, programmable clocking, and high-speed connectivity in a single 28 nm FPGA. The -1 speed grade targets designs that require a balance of performance and power efficiency, while the industrial-temperature suffix supports extended industrial operating requirements. A field-programmable gate array is a semiconductor whose digital behavior is configured after fabrication. Within the product hierarchy, an FPGA is a programmable logic device, a semiconductor, and a configurable alternative to a fixed-function ASIC. Kintex-7 devices combine this flexibility with dedicated resources for parallel processing, embedded memory, clock management, and external interfaces, making them suitable for systems whose algorithms, interface requirements, or product revisions are not yet fully fixed. The XC7K160T-1FBG484I provides 162,240 logic cells in a 484-ball FCBGA package with 185 I/O. Its architecture supports features identified for the Kintex-7 family, including MMCM and PLL clocking, DSP48 processing, PCIe Gen3 connectivity, and 10-gigabit Ethernet support. The 484-ball package provides a substantial pin and power-distribution interface for designs combining wide external buses, high-speed serial links, multiple clock domains, and dedicated application-specific logic. For clocked systems, the FPGA includes dedicated clock-management resources rather than requiring every global clock or PLL function to be implemented with general-purpose logic. The MMCM and PLL resources can support clock generation, phase shifting, frequency generation, and jitter-control functions within the limits defined by the product documentation. Designers should still use the clocking guidance and timing constraints in the Kintex-7 documentation when constraining generated clocks and establishing board-level timing budgets. Typical applications include industrial control and automation, high-performance signal processing, data acquisition, telecommunications infrastructure, network interface equipment, and embedded systems requiring high-speed serial connectivity. The 185 available I/O sites support parallel external interfaces, while the programmable DSP and logic resources can accelerate filtering, correlation, encoding, control loops, and other data-intensive operations. The package is also suitable for systems needing substantial general-purpose parallelism without committing to a fixed-function ASIC. Board design must treat the FCBGA package as a demanding high-density layout. Follow the AMD package pinout files and the power, decoupling, and thermal guidance in the Kintex-7 documentation. Confirm every ball assignment against the exact XC7K160T-1FBG484I device, preserve the prescribed power and ground planes, and verify high-speed differential routing against the relevant transceiver constraints before fabrication. This product record combines the exact device identity, package information, and order-code distinctions with application-oriented implementation guidance. It also identifies speed-grade and temperature-grade alternatives that retain the 484-ball package, helping engineers evaluate a common-footprint migration without overlooking configuration, qualification, or timing differences.

طلب عرض سعر اتصل بنا
XC7K160T-1FBG676C - Kintex-7 162K FPGA | AMD Xilinx
XC7K160T-1FBG676C

XC7K160T-1FBG676C - Kintex-7 162K FPGA | AMD Xilinx

AMD Xilinx XC7K160T-1FBG676C is a Kintex-7 field-programmable gate array with 162,240 logic cells, a -1 speed grade, and a 676-ball FCBGA package. The device operates from a 1 V core supply and is associated with an extended commercial temperature grade up to 85 °C. Its programmable logic resources support demanding control, signal-processing, networking, industrial, communications, and test-equipment designs. A Kintex-7 FPGA belongs to the FPGA and CPLD category of programmable semiconductor devices. Unlike a fixed-function processor or application-specific integrated circuit, an FPGA combines configurable logic blocks, programmable interconnect, block RAM, DSP resources, and programmable input/output blocks. This hierarchy places the Kintex-7 device above individual logic cells and below larger system-level designs, allowing engineers to implement parallel datapaths, protocol interfaces, control logic, and signal-processing functions in one device. The XC7K160T family provides 162,240 logic cells and is manufactured on a 28 nm CMOS process. The -1 suffix identifies the device performance grade, while the FBG676 designation identifies the 676-ball package and associated commercial ordering configuration. The listed package dimensions and exact ball assignments remain controlled by the AMD Kintex-7 documentation. Compared with smaller 7 series devices, the 160T model provides substantially more logic and fixed resources for designs requiring multiple high-speed interfaces or parallel processing. The Kintex-7 architecture supports programmable I/O, embedded memory, digital signal processing, and dedicated clocking resources. These resources make the XC7K160T-1FBG676C suitable for video processing, industrial automation, communications infrastructure, instrumentation, and high-speed control systems. Compared with a discrete processor-and-ASIC implementation, an FPGA can consolidate parallel logic into a single programmable component and shorten the time required to modify protocols or algorithms after hardware fabrication. Typical deployments include industrial Ethernet and serial-interface bridges, high-speed data acquisition, radar and signal-processing front ends, test and measurement platforms, and embedded control systems. The device is particularly useful when several channels must be processed concurrently, latency must remain predictable, or field updates are required. Board-level implementation still depends on the selected I/O standards, memory interfaces, clocking topology, power budget, thermal conditions, and pin assignment. Design the PCB around the exact FBG676 land pattern and follow the AMD power, decoupling, clocking, configuration, and thermal guidance. Provide clean regulated supplies, place decoupling capacitors close to their associated power balls, maintain the required configuration interface, and route high-speed signals with controlled impedance. Because the package exposes hundreds of balls, assembly and inspection require adequate BGA assembly capability and a land pattern derived from the package documentation rather than inferred from a generic BGA library. This product page combines the verified XC7K160T-1FBG676C identity, package information, technology details, comparison references, sourcing context, and practical implementation guidance. It also distinguishes true drop-in FPGA options from changes that require new pin assignments, different power plans, different configuration behavior, or a different PCB footprint.

طلب عرض سعر اتصل بنا
XC7K160T-1FBG676I - 162K-Logic Kintex-7 FPGA | AMD
XC7K160T-1FBG676I

XC7K160T-1FBG676I - 162K-Logic Kintex-7 FPGA | AMD

The AMD XC7K160T-1FBG676I is a Kintex-7 field-programmable gate array with 162,240 logic cells, 400 I/O, 28 nm fabrication technology, and a 676-ball FCBGA package. It belongs to the Kintex-7 FPGA family, a programmable-logic hierarchy that combines configurable logic blocks, block RAM, DSP resources, programmable I/O, clocking, and high-speed serial transceivers on one semiconductor device. A field-programmable gate array is a digital integrated circuit whose interconnections and processing functions are configured after manufacture. FPGA design tools translate RTL, constraints, and block-level descriptions into a configuration bitstream. Once loaded into the XC7K160T, this configurable logic can implement processors, control systems, protocol bridges, data-processing pipelines, and other digital functions without changing the physical circuit board. The Kintex-7 family provides more compute density than smaller FPGA families and is positioned for high-performance signal processing, networking, communications, and industrial systems. The XC7K160T-1FBG676I provides 162,240 logic elements and 400 user I/O. Listings identify 25,350 ALM and 11.43 Mbit of embedded memory, while the device also includes dedicated DSP resources and high-speed transceivers. Its -1 speed grade targets performance below the -2 and -3 grades, while the industrial suffix supports an operating range of -40°C to +100°C. Core and I/O power rails cover approximately 0.97 V to 1.03 V for the core and 1.2 V to 3.3 V across the listed operating supply range. The architecture supports parallel programmable logic, distributed memory, dedicated block RAM, DSP arithmetic, clock-management resources, and serial transceivers. This combination allows a single Kintex-7 implementation to consolidate functions that might otherwise require an FPGA, a processor, and external interface devices. The -1 grade is appropriate when a design requires a large amount of parallel logic but does not require the timing margin of a faster speed grade. Bitstream configuration, clocking, power sequencing, and transceiver operation must follow the Kintex-7 design guidance in DS182. Typical uses include industrial Ethernet interfaces, 10-gigabit Ethernet signal processing, PCIe Gen3 endpoint or root-port designs, network packet processing, radar and test-equipment front ends, high-speed data acquisition, and embedded control systems with substantial parallel processing. The 400-I/O count also supports board-level integration of memories, transceivers, clocks, sensors, and high-speed board interfaces when the electrical and pin-count constraints of the FCBGA-676 package are satisfied. The 676-ball FCBGA package demands careful PCB design, including controlled impedance routing, dense via arrays, adequate power-plane connectivity, and thermal management beneath the device. Designers should use the complete pinout, recommended decoupling network, and package-specific land pattern from DS182 rather than relying on generic BGA guidance. Configuration, clock, serial-transceiver, and JTAG signals should be validated for signal integrity before a production layout is released. This product record combines the Kintex-7 architecture, FCBGA-676 package characteristics, temperature and speed-grade distinctions, package-compatible alternatives, and practical PCB guidance. It supports direct part selection when the design needs 162,240 logic cells, 400 I/O, and the -1 industrial-grade Kintex-7 configuration in one 676-ball package.

طلب عرض سعر اتصل بنا
XC7K160T-1FF676C - 162240-Cell Kintex-7 FPGA | AMD
XC7K160T-1FF676C

XC7K160T-1FF676C - 162240-Cell Kintex-7 FPGA | AMD

The AMD/Xilinx XC7K160T-1FF676C is a Kintex-7 field-programmable gate array with 162,240 logic cells, 28 nm process technology, and a 676-ball FCBGA package. It is the -1 speed-grade, commercial-temperature member of the XC7K160T device family, combining programmable logic, fixed resources, memory, and high-speed I/O in one package. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic and interconnect can be configured after fabrication. FPGAs occupy the hierarchy between programmable logic devices and application-specific integrated circuits. Unlike a fixed-function ASIC, an FPGA permits design changes, hardware acceleration, and product differentiation without fabricating a new custom chip. The Kintex-7 family balances substantial logic capacity with high-speed serial, parallel, and memory interfaces. The XC7K160T configuration provides 162,240 logic cells and 12,675 configurable logic blocks according to the device listing and family comparison material. A 1.096 GHz-class maximum clock figure is associated with the -1FFG676I ordering information, while the target part uses the -1 speed grade. Its 676-ball FCBGA package supports dense board-level integration, and the listed 400-user I/O count supports parallel digital connectivity. Exact I/O standards and performance depend on the selected bank voltage and the FPGA configuration. The 28 nm Kintex-7 architecture is intended for designs requiring substantial parallel processing without the cost and schedule of a custom ASIC. Programmable logic can implement protocol handling, packet processing, data acquisition, control, or test logic, while dedicated hard resources support clocking, memory, and high-speed serial communication. Designers can evaluate different clock rates and pin assignments before committing a final bitstream, making the device suitable for both prototype development and production control systems. Typical uses include industrial machine vision, communications infrastructure, test and measurement, radar or signal processing, high-speed data acquisition, and embedded video processing. The large logic inventory is especially useful for parallel datapaths that would otherwise require several smaller programmable devices. System partitioning should account for clocking, memory bandwidth, serial transceiver requirements, power budget, and PCB-routing constraints. A critical design consideration is that FCBGA assembly requires a dense, multilayer PCB with short, impedance-controlled escape routes and carefully planned power and ground planes. Decoupling, simultaneous-switching-noise control, thermal management, and BGA assembly capability can determine whether the FPGA achieves its intended performance. The -1 speed grade should be matched to timing constraints without assuming that a higher-grade alternative is necessary. This page combines the exact XC7K160T-1FF676C package identity with practical ordering guidance, same-package Kintex-7 alternatives, parameter comparisons, and design-focused selection criteria. It also distinguishes genuine drop-in options from device names that use a different package or ball map and therefore require PCB-level qualification.

طلب عرض سعر اتصل بنا
XC7K160T-1FF676I - 162,240-Cell Kintex-7 FPGA | AMD
XC7K160T-1FF676I

XC7K160T-1FF676I - 162,240-Cell Kintex-7 FPGA | AMD

The AMD XC7K160T-1FF676I is a Kintex-7 field-programmable gate array with 162,240 logic cells, 250 user I/Os and a 676-ball flip-chip BGA package, built on a 28 nm CMOS process. The device uses the -1 speed grade and an industrial-temperature designation, making it suitable for high-throughput signal processing, programmable logic, connectivity and embedded control systems. A Kintex-7 FPGA is a reprogrammable semiconductor containing configurable logic blocks, programmable I/O, block RAM, DSP slices, clock-management resources and high-speed transceivers. Within the FPGA hierarchy, the XC7K160T occupies the middle of AMD's Kintex-7 range: it provides substantially more parallel processing capacity than entry-level Artix-7 devices while supporting high-speed serial connectivity and clocking functions. Key characteristics include 162,240 logic cells, approximately 250 user I/Os and 1,2675 CLBs as identified in the device listings. The -1 performance grade targets cost-sensitive applications that do not require the highest -2 or -3 speed grades. The -2 and -3 grades offer additional timing margin, while the -1 grade is appropriate when system timing closes with moderate design margins. The device combines programmable digital logic with DSP48 resources and dedicated memory blocks for filtering, modulation, waveform generation, packet processing and accelerator functions. AMD documentation identifies the Kintex-7 family as optimized for price-performance, with the 676-ball package supporting dense board-level integration where high pin count and robust interconnect access are important. Typical uses include telecommunications line cards, industrial networking, radar and signal-processing subsystems, high-speed data acquisition, video infrastructure, test equipment and aerospace-grade embedded processing. Industrial temperature screening makes the -1FF676I option relevant to equipment expected to operate in extended commercial environments. For a new PCB, use the manufacturer's package pinout, escape-routing guidance and power-supply recommendations rather than inferring connections from board-to-board-migration examples. The 676-ball package requires careful ball-grid-array escape routing, and the device's numerous high-speed I/Os make return paths, reference planes and via transitions important to signal integrity. This page consolidates the verified device identity, package and resource data, drop-in-compatible Kintex-7 options, engineering selection criteria and practical design notes into a single engineering reference. It also distinguishes exact package and speed-grade substitutions from parts that require a different PCB land pattern.

طلب عرض سعر اتصل بنا
XC7K160T-1FFG676I - 162K Kintex-7 FPGA | AMD Xilinx
XC7K160T-1FFG676I

XC7K160T-1FFG676I - 162K Kintex-7 FPGA | AMD Xilinx

The AMD Xilinx XC7K160T-1FFG676I is a Kintex-7 field-programmable gate array with 162,240 logic cells, 400 user I/Os, and 11,980,800 block RAM bits in a 676-pin FCBGA package. It is manufactured on 28 nm CMOS technology, uses the -1 speed grade, and supports an industrial junction-temperature range from -40 °C to 100 °C. The FFG676 package measures approximately 27 × 27 mm and is intended for dense programmable-logic, signal-processing, networking, and high-speed interface systems. A Kintex-7 FPGA is a semiconductor device whose programmable logic fabric, block RAM, DSP resources, programmable I/O, and dedicated configuration pins can be configured after manufacture. Within the FPGA hierarchy, Kintex-7 devices sit between lower-cost Artix-7 devices and higher-density UltraScale devices, combining substantial logic, memory, DSP, and high-speed I/O resources for communications, industrial control, instrumentation, and embedded processing. The device provides 12,675 configurable logic blocks, 11,700 Kb of block RAM, and 600 DSP slices. Its -1 speed grade identifies the performance class, while the FFG676 suffix identifies the 676-ball package configuration. The industrial I suffix supports operation across the stated -40 °C to 100 °C junction-temperature range. A nominal 1 V core-related supply figure is associated with this device family, although complete power planning must follow the AMD/Xilinx power, configuration, and package guidance. The Kintex-7 architecture combines hard DSP slices, dual-port block RAM, high-speed serial transceivers, dedicated clock-management resources, and selectable I/O standards. These resources allow parallel logic, filtering, waveform generation, packet handling, and interface bridging to be consolidated in one device. The 400 user I/Os support substantial board-level connectivity, while the programmable fabric can implement application-specific control, datapaths, and protocol engines. Typical uses include industrial automation, test and measurement, high-speed data acquisition, communications infrastructure, embedded signal processing, video processing, and secure control systems. The 27 nm Kintex-7 architecture is particularly useful where designers need more logic, RAM, and DSP capacity than a smaller FPGA while retaining a large BGA package with ample I/O. PCB implementation requires a multilayer board with carefully controlled power distribution, ground-plane continuity, ball-escape routing, and high-speed design rules. Decoupling, configuration-bank handling, clocking, and JTAG access should be planned from the outset. Because the FFG676 land pattern is dense and device-specific, use the AMD/Xilinx pinout and PCB design guidance when assigning power, ground, configuration, and high-speed differential pairs. This page combines the key device identity, package characteristics, resource counts, drop-in speed-grade options, application guidance, and PCB considerations needed to evaluate the XC7K160T-1FFG676I for a new Kintex-7 design.

طلب عرض سعر اتصل بنا
XC7K160T-2FB484I - Kintex-7 FPGA, 162240 Logic Cells, 484-FCBGA | AMD
XC7K160T-2FB484I

XC7K160T-2FB484I - Kintex-7 FPGA, 162240 Logic Cells, 484-FCBGA | AMD

The AMD Xilinx XC7K160T-2FB484I is a Kintex-7 field programmable gate array (FPGA) built on a 28 nm process, providing 162240 programmable logic cells, 285 I/O, and 11980800 bits of block RAM in a 484-ball FCBGA (FB484) surface-mount package. The -2 speed grade and industrial temperature qualification make it the mid-density option in the Kintex-7 family for signal processing, high-speed serial links, and general-purpose logic acceleration. A field programmable gate array is a reconfigurable digital integrated circuit whose interconnect and logic blocks are defined by a bitstream loaded at configuration time. Within the semiconductor hierarchy, an FPGA sits above programmable logic devices and below application-specific ICs, offering a middle ground between fixed-function ASICs and low-density CPLDs: the flexibility of software-programmable hardware with the density, clocking, and I/O bandwidth of a full SoC-class device. Key features of this device include the 28 nm 7-series fabric, 162240 logic cells, and a 484-FCBGA package with a 1 V nominal core supply. The -2 speed grade is the balanced performance grade in the Kintex-7 lineup, positioned between the entry -3 and -1 grades and the highest-performance -1L and -2L grades, which are screened for lower static power. Kintex-7 devices support high-speed serial transceivers, clock management, block RAM, and DSP slices for filtering and fixed-point arithmetic. Because the FB484 package is a dense flip-chip BGA on a 1.0 mm ball pitch, this device is intended for multilayer PCB designs with careful via-in-pad and power-plane planning. Decoupling must scale with the number of simultaneously switching I/O, and dedicated configuration, VCCINT, VCCAUX, and VCCBRAM rails each need their own filtering network. Typical applications include radar and sonar signal processing, high-speed data acquisition, industrial vision, test and measurement instrumentation, network interface equipment, and digital broadcast infrastructure. Kintex-7 devices are also common in aerospace, defence, and communications payloads where the industrial-grade screening and deep toolchain support matter. When planning a design, confirm the pinout and package ball assignment in the manufacturer package files, keep the VCCO supply within the I/O standard voltage range of each bank, and reserve a dedicated configuration memory interface for parallel or serial bitstream loading. This page consolidates distributor availability, package details, and drop-in alternatives together with practical design guidance that is not collected in a single datasheet. Key engineering decisions on this device center on density, package choice, and lifecycle. The 484-FCBGA footprint offers more I/O and routing headroom than smaller packages in the family but demands a laminate design with strict impedance control and a large ball escape array. Designers moving between Kintex-7 devices should confirm ball map compatibility before committing a layout, since the Xilinx package files are the authoritative source for pin assignment. The XC7K160T-2FB484I is listed as an active part, and its -2 grade and industrial rating make it the default selection for mid-density Kintex-7 designs that need more than a CPLD but do not require an UltraScale device.

طلب عرض سعر اتصل بنا
XC7K160T-2FB676I - 162240-Cell -2 Kintex-7 FPGA | AMD
XC7K160T-2FB676I

XC7K160T-2FB676I - 162240-Cell -2 Kintex-7 FPGA | AMD

The AMD XC7K160T-2FB676I is a Kintex-7 field-programmable gate array with 162240 programmable logic cells, 400 I/O, and a 676-pin FCBGA package. It is built on 28 nm FPGA technology, operates from a 1 V core supply, and carries the -2 performance speed grade for demanding programmable-logic, communications, signal-processing, and embedded-systems designs. A field-programmable gate array is a reconfigurable digital semiconductor that combines programmable logic blocks, block RAM, programmable input/output resources, dedicated processing resources, and programmable interconnect. Within the semiconductor hierarchy, an FPGA sits above fixed-function logic and provides hardware customization through configuration bitstreams. This makes an FPGA useful when a design needs parallel processing, high I/O density, deterministic digital interfaces, or field-updatable behavior. The XC7K160T belongs to the Kintex-7 family and is identified by the -2 speed grade. Its 162240-cell architecture provides substantial logic capacity, while 400 I/O support interfaces to external memory, transceivers, converters, network controllers, and test equipment. The 1 V core supply and 28 nm process generation place the device between general-purpose programmable logic and larger, higher-cost Kintex designs that require more resources or greater I/O bandwidth. The 676-pin FCBGA package supports dense board layouts and high pin availability, but it also demands careful ball assignment, multilayer PCB construction, and controlled power delivery. Unlike a small serial FPGA, this device supports a broad mix of parallel and serial connectivity. Its industrial-temperature suffix identifies it for applications requiring operation across an extended environmental range, while the -2 grade provides a defined performance class within the Kintex-7 portfolio. Typical uses include industrial control systems, high-speed data acquisition, video and image processing, communications infrastructure, test and measurement equipment, and embedded signal-processing platforms. A video-processing design can use parallel logic for pixel pipelines and block RAM for line buffering. A communications design can partition serial transceivers, clocks, protocol logic, and supervisory functions across the programmable fabric while retaining the flexibility to update the bitstream during product maintenance. PCB design should begin with the manufacturer’s package pinout and power requirements rather than treating all 676 balls as interchangeable. Separate clean and noisy supplies, place decoupling capacitors close to their associated supply balls, provide adequate via arrays beneath the BGA, and preserve high-speed return paths. Configuration storage, programming access, and a recovery strategy must also be planned because an FPGA depends on a valid bitstream before its configured logic becomes operational. This product page combines the Kintex-7 device identity, package information, parameter-level comparisons, replacement guidance, and engineering design notes. It helps engineers distinguish speed-grade and package-suffix changes before committing to a 676-ball board design, while directing procurement requests through the Request a Quote form on this page.

طلب عرض سعر اتصل بنا
XC7K160T-2FBG484C - 162K-Cell Kintex-7 FPGA | AMD Xilinx
XC7K160T-2FBG484C

XC7K160T-2FBG484C - 162K-Cell Kintex-7 FPGA | AMD Xilinx

AMD Xilinx XC7K160T-2FBG484C is a Kintex-7 field-programmable gate array with 162,240 programmable logic cells, a 1 V core supply, and 185 I/O sites in a 484-ball lidless FCBGA package. Built on 28 nm FPGA technology, the device combines programmable logic, block RAM, DSP resources, high-speed serial transceivers, and clock-management resources on one monolithic device. The -2 speed grade is intended for designs requiring a balance of performance and power efficiency. A field-programmable gate array, or FPGA, is a digital semiconductor whose interconnect and logic configuration are defined after manufacture. FPGA device families form part of the broader programmable-logic hierarchy alongside complex programmable logic devices. By integrating configurable parallel and serial processing resources into one package, an FPGA can accelerate parallel algorithms, implement communication protocols, perform signal processing, consolidate multiple discrete functions, and support field upgrades without changing the printed circuit board. The XC7K160T-2FBG484C provides 162,240 logic cells and 185 I/O in a 484-BBGA FCBGA package. Its 28 nm process supports substantially higher logic density than older FPGA technologies while retaining programmable serial connectivity and dedicated hardware for clock generation and DSP operations. The exact number of transceivers, block RAM blocks, DSP slices, programmable I/O standards, and operating-temperature limits should be selected from the manufacturer ordering guide and Kintex-7 data sheet for the selected configuration. The -2 suffix identifies the device speed grade. A lower-numbered speed grade generally trades maximum timing performance for potentially lower power characteristics, while a higher-numbered grade offers additional timing margin. Because FPGA timing depends on the implemented logic path, clock architecture, I/O standard, speed grade, and operating conditions, a replacement must preserve the device identity, package ball map, power architecture, configuration compatibility, and required performance grade. Typical applications for this Kintex-7 device include industrial control and automation, high-throughput data acquisition, network interface equipment, communications infrastructure, video and image processing, and embedded signal-processing systems. The 185 available I/O sites allow the design to connect external memory, transceivers, clocks, sensors, and data-conversion components, while its programmable logic resources support parallel pipelines that would otherwise require multiple complex devices. PCB design should preserve the 484-ball FCBGA escape routing, power distribution, decoupling, and thermal-management requirements of the Kintex-7 package. Confirm ball assignments against the manufacturer package files before assigning pins, and validate high-speed interfaces with the appropriate board-level constraints. Because the package contains many power and ground balls, uninterrupted ground-plane continuity and uniform thermal spreading are central to reliable operation. This product page consolidates the exact device identity, package information, source-backed operating attributes, pin-compatible alternatives, comparison parameters, and practical design considerations into one engineering reference. It also distinguishes true same-ball-map replacements from related Kintex-7 devices that require a different package or may not preserve configuration, timing, temperature, or qualification requirements.

طلب عرض سعر اتصل بنا
XC7K160T-2FBG484I - 162K-Cell Kintex-7 FPGA | AMD
XC7K160T-2FBG484I

XC7K160T-2FBG484I - 162K-Cell Kintex-7 FPGA | AMD

The AMD XC7K160T-2FBG484I is a Kintex-7 field-programmable gate array built on 28 nm technology, with 162,240 logic cells, 285 I/O, and a 484-ball FCBGA package. The device uses a 1 V core supply and the -2 speed grade is intended for high-performance designs requiring substantial parallel logic, DSP, and memory resources in a single package. A field-programmable gate array is a programmable semiconductor containing configurable logic blocks, programmable interconnect, block RAM, and dedicated digital signal processing resources. Within the FPGA hierarchy, the Kintex-7 family occupies the performance range between lower-cost Virtex-7 devices and ultra-high-end Virtex-7 devices, making the XC7K160T suitable for demanding communications, industrial control, instrumentation, and signal-processing systems. Principal device attributes include 162,240 logic cells, a 28 nm process node, 285 I/O, and 484-ball lead-free FCBGA packaging. The -2 suffix identifies the performance grade, while the I suffix identifies the industrial temperature grade. The FCBGA construction provides dense interconnect access for high-pin-count designs, although it requires careful via-in-pad and thermal-via layout to achieve reliable electrical and thermal performance. The Kintex-7 architecture combines programmable logic with DSP slices, block RAM, and high-speed transceiver resources on devices that include them. This balance allows designers to consolidate control logic, parallel data paths, packet-processing functions, and digital filtering into one programmable device instead of combining an FPGA with several discrete companion ICs. The 484-ball package also requires an assembly process capable of handling fine-pitch, large-area BGA interconnects. Typical uses include industrial automation and motion control, high-speed data acquisition, telecommunications line-card processing, radar and test instrumentation, image-processing pipelines, and low-latency protocol bridging. The 162,240-cell device provides more logic capacity than many smaller Kintex-7 members, making it appropriate for multi-channel architectures that must be reconfigured for different operating modes without redesigning the printed circuit board. A critical design consideration is the power and thermal budget. Although the nominal core voltage is 1 V, utilization-dependent dynamic power, adjacent I/O activity, and the dense BGA solder mask design all influence board temperature. Use the AMD power estimator and the device data sheet for resource-specific figures, provide multiple decoupling positions, and validate the assembled board across temperature and I/O activity conditions. This page adds application-specific engineering context, a parameter comparison among same-footprint Kintex-7 options, and practical layout guidance that is not consolidated in a single manufacturer datasheet table.

طلب عرض سعر اتصل بنا
XC7K160T-2FBG676C - 162,240-Cell Kintex-7 FPGA | AMD
XC7K160T-2FBG676C

XC7K160T-2FBG676C - 162,240-Cell Kintex-7 FPGA | AMD

The AMD XC7K160T-2FBG676C is a Kintex-7 field-programmable gate array with 162,240 logic cells, 400 user I/O, and 11,700 Kb of block RAM in a 676-BBGA FCBGA package. The -2 speed grade provides a performance tier between the -3 and -1 devices, while the FBG676 package supports high-density, high-speed board designs requiring extensive parallel connectivity. A Kintex-7 FPGA is a programmable digital logic device in the FPGA and CPLD hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines configurable logic, block RAM, programmable input/output, clocking, and signal-processing resources on one semiconductor. The XC7K160T belongs to the Kintex-7 family, which combines substantial general-purpose logic with high-speed serial connectivity and digital signal-processing capability for demanding embedded systems. Principal device attributes include 162,240 logic cells, 400 user I/O, and 11,700 Kb of block RAM. The package is identified as FBG676, a 676-ball FCBGA, and the -2 designation identifies the device speed grade. The available product documentation also identifies MMCM and PLL resources, supporting clock generation, phase shifting, jitter management, and multiple clock domains in designs that require deterministic clock distribution. The device's 400 I/O resources make it suitable for parallel interfaces, high-speed memory interfaces, data acquisition, control systems, and external network connectivity. Its block RAM supports buffering, packet storage, lookup tables, and firmware or parameter retention. Logic resources can implement processors, protocol controllers, arithmetic pipelines, and custom accelerators, while dedicated clocking resources help maintain timing margin across multiple clock domains. Typical applications include industrial automation, test and measurement, high-speed data acquisition, video and image processing, communications infrastructure, and embedded signal-processing systems. Kintex-7 FPGAs are especially appropriate where design flexibility, parallel I/O density, and deterministic programmable logic are more important than minimizing a fixed device's power or cost. Board design requires careful BGA fanout, layer transitions, controlled-impedance routing, power-plane distribution, and decoupling across the many supply rails. Because a 676-ball FCBGA presents demanding routing and assembly constraints, validate escape routing, thermal performance, and high-speed channel design before releasing the PCB layout to fabrication.

طلب عرض سعر اتصل بنا
XC7K160T-2FF676C - 162K Kintex-7 FPGA | AMD/Xilinx
XC7K160T-2FF676C

XC7K160T-2FF676C - 162K Kintex-7 FPGA | AMD/Xilinx

The AMD/Xilinx XC7K160T-2FF676C is a Kintex-7 field-programmable gate array built on 28 nm FPGA technology, with 162,240 logic cells, 400 user inputs/outputs, a 1 V operating core voltage, and a 676-pin FCBGA package. It combines programmable logic, configurable I/O, embedded memory, DSP processing resources, dedicated clocking, and high-speed serial transceivers in one device. An FPGA is a semiconductor whose digital circuit is defined after manufacture by loading a configuration bitstream. Within the broader semiconductor hierarchy, an FPGA is a programmable-logic IC and a field-programmable gate array. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed for protocol bridging, parallel processing, signal acquisition, control logic, or other system functions, while its 676-ball package provides a high-density connection interface to external memory, converters, transceivers, and clock sources. The Kintex-7 family combines programmable logic with dedicated hardware for DSP and serial connectivity. The XC7K160T-2FF676C provides 162,240 logic cells and 400 user I/O in an FCBGA-676 package. Its 28 nm process technology supports a 1 V core operating voltage, while the 676-contact package supports dense board-level interconnect. The device is identified by the XC7K160T family, -2 performance suffix, and the FF676C package and commercial-grade ordering suffix. Because this is an FPGA rather than a fixed-function converter or processor, its implemented performance depends on the configuration, logic mapping, memory organization, clocking scheme, and external circuitry. The -2 ordering code denotes a specific performance grade within the Kintex-7 ordering system. Designers should use the device documentation and the pinout associated with the exact order code when assigning power rails, clock inputs, configuration pins, high-speed transceiver pins, and general-purpose I/O. Typical applications include high-speed interface aggregation, network equipment, industrial control and test systems, signal-processing platforms, embedded vision, communications infrastructure, and FPGA-based accelerators. The large logic capacity is useful when a design combines parallel datapaths with serial links, while the 400 user I/O allows external memory and multiple peripheral interfaces to be connected without a separate programmable-logic device. PCB design requires close attention to the FCBGA ball map, multilayer escape routing, power-plane integrity, decoupling, thermal management, and high-speed clock and transceiver layout. The 676-pin package does not match the available package-diagram library, so use the official package drawing and pin table for land-pattern and routing work. Confirm the exact suffix interpretation and temperature grade against the manufacturer ordering guide before release. This product record combines device specifications, package details, practical design guidance, and same-family replacement comparisons. It also distinguishes directly relevant package and speed-grade options from alternatives that require a different footprint, helping engineers narrow a replacement search without assuming that every Kintex-7 ordering code is interchangeable.

طلب عرض سعر اتصل بنا