AMD

XC7K160T-1FFG676I - 162K Kintex-7 FPGA | AMD Xilinx

MPN: XC7K160T-1FFG676I ✓ نشط
1 V Vdss 676-pin FCBGA, 27 × 27 mm Package 1098 MHz Speed
الحد الأدنى للطلب: 1 |

XC7K160T-1FFG676I نظرة عامة

The AMD Xilinx XC7K160T-1FFG676I is a Kintex-7 field-programmable gate array with 162,240 logic cells, 400 user I/Os, and 11,980,800 block RAM bits in a 676-pin FCBGA package. It is manufactured on 28 nm CMOS technology, uses the -1 speed grade, and supports an industrial junction-temperature range from -40 °C to 100 °C. The FFG676 package measures approximately 27 × 27 mm and is intended for dense programmable-logic, signal-processing, networking, and high-speed interface systems.

A Kintex-7 FPGA is a semiconductor device whose programmable logic fabric, block RAM, DSP resources, programmable I/O, and dedicated configuration pins can be configured after manufacture. Within the FPGA hierarchy, Kintex-7 devices sit between lower-cost Artix-7 devices and higher-density UltraScale devices, combining substantial logic, memory, DSP, and high-speed I/O resources for communications, industrial control, instrumentation, and embedded processing.

The device provides 12,675 configurable logic blocks, 11,700 Kb of block RAM, and 600 DSP slices. Its -1 speed grade identifies the performance class, while the FFG676 suffix identifies the 676-ball package configuration. The industrial I suffix supports operation across the stated -40 °C to 100 °C junction-temperature range. A nominal 1 V core-related supply figure is associated with this device family, although complete power planning must follow the AMD/Xilinx power, configuration, and package guidance.

The Kintex-7 architecture combines hard DSP slices, dual-port block RAM, high-speed serial transceivers, dedicated clock-management resources, and selectable I/O standards. These resources allow parallel logic, filtering, waveform generation, packet handling, and interface bridging to be consolidated in one device. The 400 user I/Os support substantial board-level connectivity, while the programmable fabric can implement application-specific control, datapaths, and protocol engines.

Typical uses include industrial automation, test and measurement, high-speed data acquisition, communications infrastructure, embedded signal processing, video processing, and secure control systems. The 27 nm Kintex-7 architecture is particularly useful where designers need more logic, RAM, and DSP capacity than a smaller FPGA while retaining a large BGA package with ample I/O.

PCB implementation requires a multilayer board with carefully controlled power distribution, ground-plane continuity, ball-escape routing, and high-speed design rules. Decoupling, configuration-bank handling, clocking, and JTAG access should be planned from the outset. Because the FFG676 land pattern is dense and device-specific, use the AMD/Xilinx pinout and PCB design guidance when assigning power, ground, configuration, and high-speed differential pairs.

This page combines the key device identity, package characteristics, resource counts, drop-in speed-grade options, application guidance, and PCB considerations needed to evaluate the XC7K160T-1FFG676I for a new Kintex-7 design.

بدائل مباشرة لـ XC7K160T-1FFG676I — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

الطرازات في هذه السلسلة

طرازات من نفس السلسلة متوافقة تمامًا مع XC7K160T-1FFG676I (نفس عامل الشكل والبصمة) — يختلف في Package, Logic Cells, Speed Grade, Process Technology, Maximum Clock Frequency.

AMD
Package: 676-BBGA FCBGA
Process Technology: 28 nm
قارن مع XC7K160T-1FFG676I →
AMD
Package: 676-ball FCBGA
Process Technology: 28 nm
Maximum Clock Frequency: 1,098 MHz
قارن مع XC7K160T-1FFG676I →
AMD
Package: 676-ball FCBGA, 29 mm x 29 mm
قارن مع XC7K160T-1FFG676I →
AMD
Package: 676-ball FCBGA
Speed Grade: -2
Maximum Clock Frequency: 710 MHz
قارن مع XC7K160T-1FFG676I →
AMD
Package: 676-BBGA, FCBGA
Logic Cells: 162240
Speed Grade: -2
قارن مع XC7K160T-1FFG676I →
AMD
Package: 676-BBGA, FCBGA (27x27mm)
Logic Cells: 162,240
Speed Grade: -3 (highest performance)
قارن مع XC7K160T-1FFG676I →

XC7K160T-2FFG676I

✅ بديل مباشر
AMD
📦 676-FCBGA (FFG676)
Kintex-7 · 162240 · 11980800 bits · 600 · 400 · 676-BBGA, FCBGA · -2 · -40°C to +100°C

تواصل لمعرفة السعر

عرض ورقة البيانات ←

XC7K160T-3FFG676E

✅ بديل مباشر
AMD
📦 676-FCBGA (FFG676)
Kintex-7 · 162,240 · 11,980,800 bits · 400 · 400 · 676-BBGA, FCBGA (27x27mm) · -3 (highest performance) · 28nm

تواصل لمعرفة السعر

عرض ورقة البيانات ←

XC7K160T-2FFG676E

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 676-FCBGA (FFG676)
Same FFG676 footprint and 162,240-cell architecture; -2 speed grade is higher performance and the E suffix changes the temperature grade from industrial to commercial.

📋 بديل مرجعي (غير موجود في الكتالوج)

XC7K160T-3FFG676I

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 676-FCBGA (FFG676)
Same FFG676 footprint and device resources; -3 speed grade is higher performance than the target's -1 grade, with the industrial temperature designation retained.

📋 بديل مرجعي (غير موجود في الكتالوج)

XC7K160T-1FFG676E

✅ بديل مباشر ⚠️ مواصفات غير مُتحقق منها
📦 676-FCBGA (FFG676)
Same FFG676 footprint, speed grade, and device resources; only the temperature-grade suffix changes from industrial to commercial.

📋 بديل مرجعي (غير موجود في الكتالوج)

XC7K160T-1FFG676I الحدود القصوى والخصائص الكهربائية

FPGA Family Kintex-7
Logic Cells 162,240 cells
Configurable Logic Blocks 12,675 CLBs
Block RAM 11,980,800 bits
DSP Slices 600 slices
User I/O 400 I/Os
أقصى تردد للساعة 1098 MHz
Process Technology 28 nm CMOS
Core Supply Voltage 1 V
Speed Grade -1
Device Type Kintex-7 FPGA
العلبة 676-pin FCBGA, 27 × 27 mm
Package Designation FFG676
درجة حرارة الوصلة التشغيلية -40 °C to 100 °C
Temperature Grade Industrial
نوع التركيب Surface Mount
Programmable Logic 162,240 programmable logic cells

دليل تكوين أطراف XC7K160T-1FFG676I ffg676

تكوين الأطراف لـ XC7K160T-1FFG676I (حزمة ffg676). تتضمن هذه الدائرة المتكاملة الرقمية GPIO وواجهات الاتصال (UART وSPI وI2C) وأطراف الطاقة. راجع ورقة بيانات الشركة المصنعة لوظائف الأطراف البديلة وخيارات التكوين. ضرورية لتصميم الأنظمة المدمجة وتخطيط PCB.

مخطط توزيع أطراف حزمة ffg676 لـ XC7K160T-1FFG676I

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ XC7K160T-1FFG676I.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

XC7K160T-1FFG676I مناسب لـ 6 التطبيقs: Industrial Automation and Control, High-Speed Data Acquisition, Communications and Protocol Processing, Digital Signal Processing, Test and Measurement, Embedded Video Processing.

🏭

Industrial Automation and Control

The XC7K160T-1FFG676I is well suited to industrial controllers because it combines 162,240 logic cells, 600 DSP slices, and an industrial -40 °C to 100 °C junction-temperature range. It can implement motion sequencing, machine vision preprocessing, industrial protocol bridges, and real-time control logic in one package. The -1 speed grade supports designs that need substantial parallelism without requiring the higher timing class of a -2 device. Engineers should use the FFG676 power map, establish clean auxiliary and I/O rails, and complete timing and thermal analysis for the target enclosure.

📡

High-Speed Data Acquisition

For high-speed acquisition systems, the XC7K160T-1FFG676I provides 400 user I/Os, 11,980,800 block RAM bits, and 600 DSP slices for parallel capture, buffering, filtering, and format conversion. Parallel data paths can be organized across configurable logic blocks while DSP slices perform multiply-accumulate operations common in digital filtering. The large FCBGA package also provides many user connections, although the 27 × 27 mm land pattern demands careful ball-escape routing. Signal-integrity checks, source-synchronous interfaces, clock jitter, and thermal performance should be validated before high-rate operation.

🌐

Communications and Protocol Processing

The XC7K160T-1FFG676I can consolidate communications control, packet buffering, classification, and line-rate data processing in a single Kintex-7 device. Its 162,240 logic cells support parallel protocol engines, while 11,980,800 RAM bits can hold packet queues and lookup structures. The 600 DSP slices can accelerate filters and transforms in software-defined radio or test-equipment data paths. Designers should use the appropriate high-speed I/O resources, constrain input and output delays, and confirm that the selected -1 speed grade closes timing at the required clock and data rates.

⚡

Digital Signal Processing

The XC7K160T-1FFG676I is appropriate for fixed-point filtering, FFT, modulation, demodulation, and waveform-generation systems because its 600 DSP slices provide dedicated arithmetic resources alongside 162,240 logic cells. Large block RAM banks support sample storage, coefficient tables, and multi-buffer data paths. Partitioning arithmetic across DSP slices can improve throughput, but memory inference, pipeline latency, and DSP cascade use must be reviewed in the implementation results. Power and temperature checks are particularly important because sustained DSP activity can raise junction temperature above the level predicted from logic utilization alone.

🔧

Test and Measurement

In automated test equipment, the XC7K160T-1FFG676I can implement pattern generation, real-time analysis, timing checks, and instrument-control logic within one programmable device. Its large RAM capacity supports long capture buffers, while the DSP slices accelerate filtering and mathematical operations. The industrial temperature range supports use in controlled industrial environments, but final ambient limits depend on board cooling and enclosure conditions. Design teams should separate sensitive analog supplies from FPGA rails, provide deterministic clocking, and use boundary-scan access for production testing and board bring-up.

📺

Embedded Video Processing

The XC7K160T-1FFG676I can support image acquisition, pixel transformation, color processing, and interface bridging in embedded vision equipment. Its 400 I/Os provide board-level connectivity, 162,240 logic cells implement control and datapaths, and 600 DSP slices accelerate multiplication-heavy pixel operations. The -1 industrial-grade device is suitable for production systems operating across the specified junction-temperature range when adequate cooling is designed into the assembly. Clock-domain crossings, video timing constraints, memory bandwidth, and the FFG676 escape-routing strategy require careful Vivado and PCB planning.

What are the key specifications of XC7K160T-1FFG676I that engineers should know?
The XC7K160T-1FFG676I is a Kintex-7 FPGA with 162,240 logic cells, 12,675 CLBs, 11,980,800 block RAM bits, 600 DSP slices, and 400 user I/Os. It uses 28 nm CMOS technology in a 27 × 27 mm, 676-pin FCBGA package and carries the -1 industrial speed and temperature designation. These resources make it suitable for high-density logic, embedded memory, fixed-point or floating-point signal processing, and communications designs.
Where can I download the XC7K160T-1FFG676I datasheet PDF?
The XC7K160T-1FFG676I datasheet and device documentation are available through the AMD/Xilinx product documentation ecosystem and the linked XC7K160T datasheet directory. Use the manufacturer data sheet for definitive pin assignments, bank voltage limits, configuration requirements, DC and AC switching tables, package drawings, and power estimates. The FFG676 pin map must also be checked against the selected design because this large BGA package is not supported by the package-diagram library used on this page.
What is the difference between XC7K160T-1FFG676I and XC7K160T-2FFG676I?
The XC7K160T-1FFG676I and XC7K160T-2FFG676I share the Kintex-7 device family and FFG676 package, while their speed grades differ. The -2 device is specified for higher performance than the -1 device, so timing-critical paths should be compared using the manufacturer timing tables. Both retain the same 162,240 logic cells, 400 I/Os, and 11,980,800 block RAM bits, making the -2 part a hardware-compatible option when its timing class and power requirements meet the design.
What can replace the XC7K160T-1FFG676I in an existing FFG676 board?
A hardware-compatible replacement should use the same Kintex-7 device with an FFG676 package and compatible speed, temperature, and I/O requirements. XC7K160T-2FFG676I is the closest listed same-package option because it preserves the package and device resources while changing the speed grade. XC7K160T-3FFG676E can also be considered when its commercial temperature grade is acceptable, but it is not automatically a functional replacement for an industrial-temperature design. Confirm timing, power, configuration, and lifecycle requirements before substitution.
Is XC7K160T-1FFG676I the same as XC7K160T-1FBG676C?
No. The XC7K160T-1FBG676C belongs to the FBG676 package family and carries a commercial-grade suffix, while the XC7K160T-1FFG676I uses FFG676 and an industrial-grade suffix. Although both may provide 676-ball Kintex-7 devices, package ball maps and electrical or I/O assignments must be compared directly. Treat them as different package variants unless the manufacturer pin tables establish every required ball, power, and I/O connection as compatible.
Is the XC7K160T-1FFG676I suitable for industrial signal-processing applications?
Yes. The XC7K160T-1FFG676I combines 600 DSP slices with 11,980,800 block RAM bits and an industrial -40 °C to 100 °C junction-temperature range. It can support digital filters, FFT-style datapaths, modulation, waveform generation, and high-throughput data acquisition. Its 28 nm implementation and -1 speed grade should be checked against the required clock rate, timing closure, power budget, and enclosure temperature before production release.
When should I choose XC7K160T-1FFG676I over XC7K160T-2FFG676I?
Choose XC7K160T-1FFG676I when its -1 timing performance satisfies the design and lower operating performance is acceptable. Choose XC7K160T-2FFG676I when the design needs the higher -2 speed class or has more demanding external-interface timing requirements. Both use the FFG676 package and the same Kintex-7 resource counts, so selection should be based on timing closure, power, thermal design, availability, and qualification requirements rather than package migration.
How much block RAM and DSP capacity does the XC7K160T-1FFG676I provide?
The XC7K160T-1FFG676I provides 11,980,800 block RAM bits and 600 DSP slices alongside 162,240 logic cells. The RAM can support packet buffers, sample storage, lookup tables, and data-plane queues, while the DSP slices accelerate multiply-accumulate operations used in filters, transforms, and digital communications. Actual application capacity also depends on how memories and DSP blocks are grouped, so the Vivado implementation report should be reviewed after architecture mapping.
How should the XC7K160T-1FFG676I power rails be designed?
The XC7K160T-1FFG676I power system must provide clean, separately managed rails for the FPGA core, auxiliary power, configuration, and I/O banks. Follow the manufacturer power-guidance document for rail names, sequencing, voltage tolerances, current limits, and decoupling. Place bulk and high-frequency decoupling capacitors close to the associated BGA power and ground balls, and provide adequate power-plane connectivity to handle both static and transient current. Thermal estimates should be checked against the actual board and enclosure.
What is the XC7K160T-1FFG676I operating temperature range?
The XC7K160T-1FFG676I is specified as an industrial-grade device with a -40 °C to 100 °C operating junction-temperature range. Junction temperature is not the same as ambient temperature; PCB copper, airflow, adjacent components, and the FPGA's power dissipation determine the permissible ambient temperature. Use the manufacturer power-and-thermal estimation tools and verify the final assembly under worst-case operating conditions.
Where can I buy the XC7K160T-1FFG676I and what is its current price?
Use the Request a Quote form on this page to request the current XC7K160T-1FFG676I price, stock position, minimum order quantity, and lead time. Quote requests allow the exact package suffix and inspection requirements to be confirmed before order placement. The manufacturer designates this device as active, but production scheduling and inventory should be reconfirmed for the quantity and delivery horizon required by the project.
What is the lead time for the XC7K160T-1FFG676I?
The current lead time depends on order quantity, allocation status, and the requested delivery date. Submit an XC7K160T-1FFG676I request through the Request a Quote form on this page, stating the annual and initial demand, target date, and required packaging details. The manufacturer lists the Kintex-7 family as active, but a quotation is the appropriate method for confirming a committed delivery schedule.
Is the XC7K160T-1FFG676I currently in stock?
Stock should be confirmed through the Request a Quote form on this page rather than inferred from a distributor search page. Include the exact MPN, required quantity, target delivery date, and whether an unbroken date code or other inspection condition is necessary. For production planning, request a supply forecast as well as immediate availability because large FPGA demand can be allocated across multiple manufacturing lots.
What is the best AMD/Xilinx equivalent for the XC7K160T-1FFG676I?
The closest AMD/Xilinx same-package options are the XC7K160T-2FFG676I, XC7K160T-2FFG676E, XC7K160T-3FFG676I, and XC7K160T-3FFG676E. They preserve the Kintex-7 FFG676 footprint and primary resource architecture but differ in speed grade and, where the suffix changes, operating-temperature grade. Choose the exact variant that satisfies timing, temperature, power, lifecycle, and qualification requirements rather than relying on package equivalence alone.
How do I find the XC7K160T-1FFG676I pinout for PCB layout?
Use the pin-description table in the manufacturer Kintex-7 data sheet together with the FFG676 package drawing. The 676-ball FCBGA includes power, ground, configuration, clock, user I/O, and dedicated high-speed balls that must all be assigned correctly. Because the complete ball map is not reproduced here and no canonical 676-ball diagram is available, use the manufacturer pin table for PCB escape routing and power assignment. Also follow the AMD/Xilinx PCB and design-guidance documents.

بيانات مرجعية هندسية لـ XC7K160T-1FFG676I — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose XC7K160T-1FFG676I when the design fits within the -1 timing class and requires the industrial -40 °C to 100 °C junction-temperature range. Its 162,240 logic cells, 600 DSP slices, 400 I/Os, and 11,980,800 RAM bits make it appropriate for substantial control, datapath, communications, and signal-processing systems. Select XC7K160T-2FFG676I when the higher -2 speed class is needed but industrial temperature operation is required. Choose XC7K160T-3FFG676I when maximum listed speed performance and industrial temperature are both priorities. The E-suffix XC7K160T-2FFG676E and XC7K160T-3FFG676E variants are appropriate when commercial temperature operation is sufficient. XC7K160T-1FFG676E is the closest same-speed alternative, but it changes temperature grade. In every case, preserve the FFG676 footprint and verify timing, power, configuration, pin assignments, and thermal performance before substitution.

المقارنة مع البدائل

المعامل هذا المنتج XC7K160T-2FFG676I XC7K160T-3FFG676E XC7K160T-2FFG676E XC7K160T-3FFG676I XC7K160T-1FFG676E
Brand AMD AMD AMD AMD AMD AMD
Package 676-FCBGA (FFG676) 676-FCBGA (FFG676) 676-FCBGA (FFG676) 676-FCBGA (FFG676) 676-FCBGA (FFG676) 676-FCBGA (FFG676)
FPGA Family Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7
Speed Grade -1 -2 -3 -2 -3 -1
Temperature Grade Industrial Industrial Commercial Commercial Industrial Commercial
Logic Cells 162,240 cells 162,240 cells 162,240 cells 162,240 cells 162,240 cells 162,240 cells

أبرز الفروقات

  • Matches the -1 speed requirement while offering a commercial-temperature same-footprint option (مقابلXC7K160T-1FFG676E)
  • Lower speed class can reduce the performance margin needed for timing closure (مقابلXC7K160T-2FFG676I)
  • Industrial qualification is retained across a higher-speed option (مقابلXC7K160T-3FFG676I)
  • Broader temperature suitability distinguishes the target from the E-suffix alternatives (مقابلXC7K160T-3FFG676E)

ملاحظات التصميم

Design the core, auxiliary, configuration, and I/O supplies as a coordinated multi-rail system. Follow the manufacturer power guide for voltage tolerances, sequencing, current limits, and decoupling values rather than treating the 1 V device figure as a complete power specification. Place bulk capacitance near the power-entry structure and high-frequency ceramic decoupling close to the relevant BGA balls. Verify droop during configuration and high-speed I/O activity because simultaneous dynamic current changes can produce rail coupling even when average current is acceptable.

The 27 × 27 mm FFG676 package requires multilayer PCB construction, laser or microvia escape routing, and uninterrupted reference-plane return paths. Assign every power, ground, configuration, clock, and user-I/O ball from the manufacturer FFG676 pin table. Maintain symmetry and length matching for high-speed differential pairs, avoid routing over plane splits, and use the manufacturer's recommended ball-pitch and via rules. A completed stack-up and signal-integrity simulation should precede fabrication because small geometry variations can materially affect high-speed edges.

Thermal design should include the dynamic power of configured logic, block RAM, DSP slices, high-speed I/O, and the device's static configuration-dependent power. Use the manufacturer power estimator with realistic activity factors, then remove the calculated heat through board vias, copper planes, and enclosure airflow or conduction. Junction temperature must remain within the -40 °C to 100 °C industrial rating under worst-case ambient conditions. Validate the assembled board because package thermal performance depends strongly on PCB thickness, via density, copper coverage, and neighboring heat sources.

Do not substitute a different FBG, FFG, speed, or temperature suffix solely because the ball count matches. The package suffix can alter ball assignments, I/O composition, power architecture, or environmental qualification. Likewise, a higher speed grade may change timing without preserving the original power budget. Before replacing the XC7K160T-1FFG676I, compare the exact manufacturer pin tables, bank voltages, timing specifications, configuration behavior, temperature range, and thermal requirements, then rerun synthesis, implementation, and timing analysis with the selected MPN.

Apply source-synchronous, chip-to-chip, and board-routing constraints using the selected speed grade's timing data. Separate clocks from aggressive switching data where practical, control reference-plane return paths, and treat configuration pins as signal-integrity-sensitive nets. For interfaces using dedicated high-speed balls, follow the manufacturer guidance on connectivity, termination, and layer transitions. Post-route timing and signal-integrity checks should cover worst-case speed-grade corner, temperature, supply, and process conditions rather than relying only on the nominal implementation report.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was established for the exact MPN.

تم التحقق من البيانات في: 2026-11-18 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

xc7k160t 1ffg676i xc7k160t 2ffg676i xc7k160t 1fbg676c xc7k160t 2fbg484i xc7k160t 2fbg676i xc7k160t ffg676 xc7k160t 2fbg676c xc7k160t datasheet xc7k160t 2fbg484c XC7K160T-1FFG676I datasheet PDF XC7K160T-1FFG676I pinout XC7K160T-1FFG676I replacement XC7K160T-1FFG676I vs XC7K160T-2FFG676I AMD XC7K160T-1FFG676I XC7K160T-1FFG676I price

المكونات والمصطلحات ذات الصلة

AMD AMD Xilinx XC7K160T-1FFG676I XC7K160T-2FFG676I XC7K160T-3FFG676E XC7K160T-2FFG676E XC7K160T-3FFG676I XC7K160T-1FFG676E Kintex-7 FPGA field-programmable gate array programmable logic configurable logic block block RAM DSP slice FFG676 FCBGA 676-pin BGA 28 nm CMOS industrial temperature grade power management IC semiconductor signal processing communications industrial automation
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر